Annotation of /alx-src/branches/alxconf-060/init.d/alxsettings
Parent Directory | Revision Log
Revision 1622 -
(hide annotations)
(download)
Thu Dec 9 09:06:33 2010 UTC (13 years, 9 months ago) by niro
Original Path: alx-src/branches/alxconf_20060908/init.d/alxsettings
File size: 23842 byte(s)
Thu Dec 9 09:06:33 2010 UTC (13 years, 9 months ago) by niro
Original Path: alx-src/branches/alxconf_20060908/init.d/alxsettings
File size: 23842 byte(s)
-create a modprobe.d module alias for eth0 too, which gets included in modprobe.conf for newer kernels -always disable ALX_CONFD_NETWORKING while re-running hardware detection
1 | niro | 221 | #!/bin/bash |
2 | |||
3 | # <niro@magellan-linux.de> | ||
4 | |||
5 | #%rlevels: 7:s 0:k 6:k | ||
6 | #%start: 41 | ||
7 | #%stop: 01 | ||
8 | |||
9 | #deps | ||
10 | #%needs: | ||
11 | #%before: | ||
12 | #%after: | ||
13 | |||
14 | niro | 368 | # $Header: /home/cvsd/alx-cvs/alx-src/alxconfig-ng/init.d/alxsettings,v 1.27 2005-10-11 12:10:15 niro Exp $ |
15 | niro | 227 | |
16 | niro | 221 | # checks first if the client was already configured and if it has an valid serial |
17 | # if not it runs the autoconfiguration script | ||
18 | # these settings will be used for client setup | ||
19 | # | ||
20 | # if client was valid it first will check if his settings against the server | ||
21 | # if no changes are at server side they will be kept, if yes the get updated. | ||
22 | # the server settings has higher priority. | ||
23 | |||
24 | source /etc/sysconfig/rc | ||
25 | source $rc_functions | ||
26 | |||
27 | niro | 282 | # mysql settings |
28 | niro | 226 | source /etc/alxconfig-ng/config.rc |
29 | niro | 282 | |
30 | # helper functions | ||
31 | niro | 226 | source /usr/lib/alxconfig-ng/functions/mysqlfunctions |
32 | niro | 227 | source /usr/lib/alxconfig-ng/functions/serial_functions |
33 | niro | 257 | source /usr/lib/alxconfig-ng/functions/config_modules |
34 | niro | 226 | source /usr/lib/alxconfig-ng/functions/config_network |
35 | source /usr/lib/alxconfig-ng/functions/config_printers | ||
36 | niro | 239 | source /usr/lib/alxconfig-ng/functions/config_sessions |
37 | niro | 226 | source /usr/lib/alxconfig-ng/functions/config_x11 |
38 | niro | 248 | source /usr/lib/alxconfig-ng/functions/config_auth |
39 | niro | 252 | source /usr/lib/alxconfig-ng/functions/config_ssh_auth |
40 | niro | 1582 | source /usr/lib/alxconfig-ng/functions/config_versions |
41 | niro | 221 | |
42 | niro | 282 | # check if mysql is available |
43 | niro | 221 | [ -x /usr/bin/mysql ] && MYSQL_ALX=true |
44 | |||
45 | niro | 282 | # other needed vars |
46 | niro | 221 | ALX_HW_DETECT=false |
47 | niro | 282 | ALX_FORCED_RECHECK=false |
48 | niro | 337 | ALX_RESET_SETTINGS=false |
49 | ALX_CONFD_NETWORKING=false | ||
50 | niro | 221 | |
51 | niro | 282 | # unset vars which may kill us |
52 | niro | 221 | unset ALX_SERIAL ALX_STATE |
53 | |||
54 | |||
55 | niro | 282 | # setup needed directories |
56 | niro | 226 | [ ! -d /etc/alxconfig-ng/state ] && install -d /etc/alxconfig-ng/state |
57 | niro | 221 | |
58 | |||
59 | niro | 337 | # read_cmdline ${item} |
60 | read_cmdline() | ||
61 | { | ||
62 | local i | ||
63 | |||
64 | for i in $(< /proc/cmdline) | ||
65 | do | ||
66 | [[ ${i} = $1 ]] && return 0 | ||
67 | done | ||
68 | |||
69 | return 1 | ||
70 | } | ||
71 | |||
72 | update_system_settings() | ||
73 | { | ||
74 | niro | 226 | echo -e ${COLMAGENTA}"Checking system setup ..."${COLDEFAULT} |
75 | niro | 221 | |
76 | niro | 257 | # get the modules settings |
77 | # ! is the first thing that must be configured ! | ||
78 | config_modules | ||
79 | |||
80 | niro | 226 | # imports network settings from db |
81 | config_networking | ||
82 | |||
83 | # imports x11 settings from db | ||
84 | config_x11 | ||
85 | |||
86 | niro | 248 | # imports session settings from db |
87 | niro | 239 | config_sessions |
88 | niro | 226 | |
89 | # imports printer settings from db | ||
90 | config_printing | ||
91 | niro | 248 | |
92 | # imports auth settings from db | ||
93 | config_auth | ||
94 | niro | 252 | |
95 | # exchange ssh rsa keys | ||
96 | niro | 265 | HOME=/root config_ssh_auth |
97 | niro | 1582 | |
98 | # import version info | ||
99 | config_version | ||
100 | niro | 221 | } |
101 | |||
102 | niro | 337 | get_system_serial() |
103 | { | ||
104 | niro | 350 | local CUR_IP CUR_MAC CUR_MTIME ALX_IFACE |
105 | niro | 221 | |
106 | niro | 350 | if [[ ${ALX_CONFD_NETWORKING} = true ]] |
107 | then | ||
108 | ALX_IFACE="$(< ${SETTINGSPATH}/confd-networking)" | ||
109 | else | ||
110 | ALX_IFACE="eth0" | ||
111 | fi | ||
112 | |||
113 | niro | 282 | # check if serial file exists |
114 | niro | 337 | if [ -f /etc/alxconfig-ng/serial ] && [[ ${ALX_FORCED_RECHECK} = false ]] |
115 | niro | 221 | then |
116 | niro | 226 | source /etc/alxconfig-ng/serial |
117 | |||
118 | niro | 282 | # start preliminary networking (dhcp) |
119 | niro | 295 | preliminary_network start |
120 | niro | 226 | |
121 | niro | 295 | # check if mysql server is reachable |
122 | # if not abort this script | ||
123 | if ! reach_mysql_server | ||
124 | then | ||
125 | preliminary_network stop | ||
126 | exit 1 | ||
127 | fi | ||
128 | |||
129 | niro | 348 | CUR_IP=$(/sbin/ifconfig ${ALX_IFACE} | sed -n '/addr:/s/ [^r]*..//gp') |
130 | CUR_MAC=$(/sbin/ifconfig ${ALX_IFACE} | grep HWaddr | cut -d ' ' -f11) | ||
131 | niro | 221 | CUR_MTIME=$(date +%s) |
132 | niro | 226 | |
133 | niro | 221 | echo -e ${COLOREDSTAR} "Trying to validate my serial ..." |
134 | niro | 226 | |
135 | niro | 282 | # nice serial output |
136 | niro | 221 | $CURS_UP |
137 | $SET_WCOL | ||
138 | echo "[ SN: ${ALX_SERIAL} ]" | ||
139 | |||
140 | if validate_serial "${ALX_SERIAL}" "${ALX_REG_DATE}" "${CUR_MAC}" | ||
141 | then | ||
142 | ALX_STATE="ok" | ||
143 | else | ||
144 | niro | 307 | # abort on non valid serial |
145 | niro | 221 | ALX_STATE="invalid serial" |
146 | niro | 1616 | echo "ALX_STATE=\"${ALX_STATE}\"" > /etc/alxconfig-ng/state/state |
147 | niro | 307 | show_invalid_serial_msg |
148 | exit 1 | ||
149 | niro | 221 | fi |
150 | |||
151 | else | ||
152 | niro | 282 | # run hardware detection |
153 | niro | 221 | echo |
154 | niro | 337 | if [[ ${ALX_FORCED_RECHECK} = true ]] |
155 | niro | 282 | then |
156 | niro | 295 | echo -e ${COLMAGENTA}"Hardware autodetection forced by system-administrator"${COLDEFAULT} |
157 | niro | 1622 | # always disable CONFD_NETWORKING here |
158 | export ALX_CONFD_NETWORKING="false" | ||
159 | niro | 282 | else |
160 | echo -e ${COLMAGENTA}"Preparing system for first boot"${COLDEFAULT} | ||
161 | fi | ||
162 | niro | 221 | ALX_HW_DETECT=true |
163 | /etc/init.d/hwdetect start | ||
164 | niro | 226 | |
165 | niro | 282 | # set hostname to alx_default_hostname |
166 | # use old hostname if this is a forced re-check | ||
167 | niro | 337 | [[ ${ALX_FORCED_RECHECK} = true ]] && ALX_DEFAULT_HOSTNAME="$(< /etc/hostname)" |
168 | niro | 221 | [ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx |
169 | HOSTNAME="${ALX_DEFAULT_HOSTNAME}" | ||
170 | niro | 226 | |
171 | niro | 282 | # update the hostname on the system for sure |
172 | niro | 230 | echo "${HOSTNAME}" > /etc/hostname |
173 | niro | 226 | |
174 | niro | 282 | # start preliminary networking (dhcp) |
175 | niro | 221 | preliminary_network start |
176 | niro | 226 | |
177 | niro | 295 | # check if mysql server is reachable |
178 | # if not abort this script | ||
179 | if ! reach_mysql_server | ||
180 | then | ||
181 | preliminary_network stop | ||
182 | exit 1 | ||
183 | fi | ||
184 | |||
185 | niro | 221 | CUR_IP=$(/sbin/ifconfig eth0 | sed -n '/addr:/s/ [^r]*..//gp') |
186 | CUR_MAC=$(/sbin/ifconfig eth0 | grep HWaddr | cut -d ' ' -f11) | ||
187 | CUR_MTIME=$(date +%s) | ||
188 | niro | 226 | |
189 | niro | 282 | # abort now if this is a forced re-check |
190 | niro | 337 | if [[ ${ALX_FORCED_RECHECK} = true ]] |
191 | niro | 282 | then |
192 | # but first check the serial | ||
193 | source /etc/alxconfig-ng/serial | ||
194 | |||
195 | echo -e ${COLOREDSTAR} "Trying to validate my serial ..." | ||
196 | |||
197 | # nice serial output | ||
198 | $CURS_UP | ||
199 | $SET_WCOL | ||
200 | echo "[ SN: ${ALX_SERIAL} ]" | ||
201 | |||
202 | if validate_serial "${ALX_SERIAL}" "${ALX_REG_DATE}" "${CUR_MAC}" | ||
203 | then | ||
204 | ALX_STATE="ok" | ||
205 | else | ||
206 | niro | 307 | # abort on non valid serial |
207 | niro | 282 | ALX_STATE="invalid serial" |
208 | niro | 307 | echo "ALX_STATE=${ALX_STATE}" > /etc/alxconfig-ng/state/state |
209 | show_invalid_serial_msg | ||
210 | exit 1 | ||
211 | niro | 282 | fi |
212 | |||
213 | # write current state to temp file | ||
214 | niro | 1616 | echo "ALX_STATE=\"${ALX_STATE}\"" > /etc/alxconfig-ng/state/state |
215 | niro | 337 | [ -f /hardware-auto-detection ] && rm /hardware-auto-detection |
216 | niro | 282 | |
217 | # now export ALX_FORCED_RECHECK=true | ||
218 | # that the setting will be updated not inserted ! | ||
219 | export ALX_FORCED_RECHECK=true | ||
220 | return 0 | ||
221 | fi | ||
222 | |||
223 | niro | 221 | echo -e ${COLOREDSTAR} "Trying to get new serial ..." |
224 | niro | 226 | |
225 | niro | 313 | # request a new serial; one command now (cause must be done in the same session) |
226 | niro | 348 | ALX_SERIAL=$(mysqldo "insert into client_serials (mtime, mac) values('${CUR_MTIME}','${CUR_MAC}'); |
227 | niro | 314 | select last_insert_id();") |
228 | niro | 221 | |
229 | niro | 337 | if [[ ${ALX_SERIAL} != NULL ]] |
230 | niro | 221 | then |
231 | niro | 282 | # nice serial output |
232 | niro | 221 | $CURS_UP |
233 | $SET_WCOL | ||
234 | echo "[ SN: ${ALX_SERIAL} ]" | ||
235 | niro | 226 | |
236 | niro | 348 | # set ALX_STATE to ok so everybody knows that everything was ok |
237 | niro | 221 | ALX_STATE=ok |
238 | niro | 226 | |
239 | niro | 1616 | echo "ALX_SERIAL=\"${ALX_SERIAL}\"" > /etc/alxconfig-ng/serial |
240 | echo "ALX_REG_DATE=\"${CUR_MTIME}\"" >> /etc/alxconfig-ng/serial | ||
241 | niro | 226 | |
242 | niro | 221 | evaluate_retval |
243 | else | ||
244 | niro | 282 | # print false (works only if this is the first statement here) |
245 | niro | 221 | evaluate_retval |
246 | niro | 226 | |
247 | niro | 282 | # set ALX_STATE to error so everybody sees there was an error |
248 | niro | 221 | ALX_STATE=error |
249 | niro | 226 | |
250 | niro | 282 | # show an error that no new serial was found |
251 | # nice serial output | ||
252 | niro | 221 | $CURS_UP |
253 | $SET_WCOL | ||
254 | echo -e "[ SN: ${COLRED}None, 0${COLDEFAULT} ]" | ||
255 | fi | ||
256 | fi | ||
257 | niro | 226 | |
258 | niro | 282 | # write current state to temp file |
259 | niro | 1616 | echo "ALX_STATE=\"${ALX_STATE}\"" > /etc/alxconfig-ng/state/state |
260 | echo "ALX_IFACE=\"${ALX_IFACE}\"" >> /etc/alxconfig-ng/state/state | ||
261 | niro | 221 | } |
262 | |||
263 | |||
264 | niro | 337 | check_is_configured() |
265 | { | ||
266 | niro | 226 | if [ -f /etc/alxconfig-ng/state/configured ] |
267 | niro | 221 | then |
268 | export ALX_CONFIGURED=true | ||
269 | else | ||
270 | export ALX_CONFIGURED=false | ||
271 | fi | ||
272 | } | ||
273 | |||
274 | |||
275 | # imports current settings to the database resolved by the hardware detection | ||
276 | niro | 337 | import_settings_to_db() |
277 | { | ||
278 | niro | 282 | # note: networking is always 'dhcp' if hw was autodetected |
279 | # note: default_domain/hostname is set in config.rc | ||
280 | niro | 229 | |
281 | niro | 282 | # to be safe, we do some sanity checks |
282 | niro | 221 | [ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain |
283 | [ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx | ||
284 | niro | 229 | |
285 | niro | 282 | # vars used by hwdetect |
286 | niro | 221 | local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME |
287 | local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER | ||
288 | local MOUSETYPE XMOUSETYPE FULLNAME DEVICE | ||
289 | niro | 229 | |
290 | niro | 282 | # get setting from hwdetect |
291 | niro | 221 | source /etc/sysconfig/hwsetup/knoppix |
292 | source /etc/sysconfig/hwsetup/mouse | ||
293 | niro | 229 | |
294 | niro | 221 | echo |
295 | echo -e ${COLMAGENTA}"Importing detected settings to database"${COLDEFAULT} | ||
296 | niro | 229 | |
297 | niro | 282 | # network |
298 | niro | 221 | echo -e " Network settings ..." |
299 | niro | 337 | if [[ ${ALX_CONFD_NETWORKING} = true ]] |
300 | then | ||
301 | # get settings | ||
302 | #source ${rc_base}/init.d/network &> /dev/null | ||
303 | for iface in $(onboot_interface_list ${network_settings}/net.*) | ||
304 | do | ||
305 | [[ $(< ${SETTINGSPATH}/confd-networking) != ${iface} ]] && continue | ||
306 | echo "WARNING: only importing settings for interface [ ${iface} ] !" | ||
307 | source ${network_settings}/net.${iface} || exit 1 | ||
308 | NETCARD_DRIVER="$(cat /etc/modules.d/net.${iface} | cut -d' ' -f3)" | ||
309 | |||
310 | niro | 348 | mysqldo "insert into cfg_network( |
311 | niro | 337 | hostname, |
312 | serial, | ||
313 | module, | ||
314 | domain, | ||
315 | networking, | ||
316 | netmask, | ||
317 | dns, | ||
318 | gateway, | ||
319 | broadcast, | ||
320 | ip, | ||
321 | forcemacto, | ||
322 | wireless_bitrate, | ||
323 | wireless_channel, | ||
324 | wireless_essid, | ||
325 | wireless_frequency, | ||
326 | wireless_mode, | ||
327 | wireless_nick, | ||
328 | wireless_auth_mode, | ||
329 | wireless_key_length, | ||
330 | wireless_key, | ||
331 | wireless_key_ascii | ||
332 | ) | ||
333 | values( | ||
334 | '${ALX_DEFAULT_HOSTNAME}', | ||
335 | '${ALX_SERIAL}', | ||
336 | '${NETCARD_DRIVER}', | ||
337 | '${ALX_DEFAULT_DOMAIN}', | ||
338 | '${NETWORKING}', | ||
339 | '${NETMASK}', | ||
340 | '${NAMESERVER}', | ||
341 | '${GATEWAY}', | ||
342 | '${BROADCAST}', | ||
343 | '${IP}', | ||
344 | '${FORCE_MAC_TO}', | ||
345 | '${WIRELESS_BITRATE}', | ||
346 | '${WIRELESS_CHANNEL}', | ||
347 | '${WIRELESS_ESSID}', | ||
348 | '${WIRELESS_FREQUENCY}', | ||
349 | '${WIRELESS_MODE}', | ||
350 | '${WIRELESS_NICK}', | ||
351 | '${WIRELESS_AUTH_MODE}', | ||
352 | '${WIRELESS_KEY_LENGTH}', | ||
353 | '${WIRELESS_KEY}', | ||
354 | '${WIRELESS_KEY_ASCII}' | ||
355 | );" | ||
356 | |||
357 | # only insert the *FIRST* iface | ||
358 | break | ||
359 | done | ||
360 | else | ||
361 | niro | 348 | mysqldo "insert into cfg_network( |
362 | niro | 337 | hostname, |
363 | serial, | ||
364 | module, | ||
365 | domain, | ||
366 | networking | ||
367 | ) | ||
368 | values( | ||
369 | '${ALX_DEFAULT_HOSTNAME}', | ||
370 | '${ALX_SERIAL}', | ||
371 | '${NETCARD_DRIVER}', | ||
372 | '${ALX_DEFAULT_DOMAIN}', | ||
373 | 'dhcp' | ||
374 | );" | ||
375 | fi | ||
376 | niro | 221 | evaluate_retval |
377 | niro | 229 | |
378 | niro | 282 | # xserver |
379 | niro | 221 | echo -e " Graphic settings ..." |
380 | niro | 282 | # xserver general |
381 | niro | 348 | ( mysqldo "insert into cfg_graphic( |
382 | niro | 221 | serial, |
383 | module, | ||
384 | resolution, | ||
385 | niro | 229 | depth, |
386 | niro | 1582 | refresh_rate |
387 | niro | 221 | ) |
388 | values( | ||
389 | '${ALX_SERIAL}', | ||
390 | '${XMODULE}', | ||
391 | '1024x768', | ||
392 | niro | 229 | '16', |
393 | niro | 1582 | '60' |
394 | niro | 252 | );"; ) |
395 | evaluate_retval | ||
396 | niro | 229 | |
397 | niro | 221 | # input |
398 | niro | 252 | echo -e " Input settings ..." |
399 | niro | 348 | mysqldo "insert into cfg_input(serial,mouse) values('${ALX_SERIAL}','${XMOUSETYPE}');" |
400 | niro | 221 | evaluate_retval |
401 | niro | 252 | |
402 | # auth | ||
403 | niro | 348 | echo -e " Authentification settings ..." |
404 | mysqldo "insert into client_auth( | ||
405 | niro | 252 | serial, |
406 | username, | ||
407 | shell, | ||
408 | vnc, | ||
409 | samba, | ||
410 | station | ||
411 | ) | ||
412 | values( | ||
413 | '${ALX_SERIAL}', | ||
414 | '${ALX_UNPRIV_USER}', | ||
415 | '', | ||
416 | '', | ||
417 | '', | ||
418 | '' | ||
419 | );" | ||
420 | evaluate_retval | ||
421 | |||
422 | niro | 263 | # exchange ssh rsa keys - the first boot needs this ! |
423 | # or no reboot will work via the webadmin | ||
424 | niro | 348 | echo -e " SSH authentification settings ..." |
425 | niro | 264 | HOME=/root config_ssh_auth |
426 | niro | 263 | evaluate_retval |
427 | |||
428 | niro | 348 | # autostart |
429 | niro | 252 | echo -e " Autostart settings ..." |
430 | niro | 348 | mysqldo "insert into cfg_autostart(serial,session) values('${ALX_SERIAL}','');" |
431 | |||
432 | # screensaver | ||
433 | echo -e " Screensaver settings ..." | ||
434 | mysqldo "insert into cfg_screensaver(serial,screensaver) values('${ALX_SERIAL}','')" | ||
435 | |||
436 | niro | 1582 | # version info |
437 | local alx_os | ||
438 | local alx_utils | ||
439 | alx_os="$(< /etc/mageversion)" | ||
440 | alx_utils="$(magequery -n alxconfig-ng-alx | sed 's:.*\[\ \(.*\)\ \].*:\1:')" | ||
441 | alx_utils="${alx_utils/alxconfig-ng-alx-}" | ||
442 | mysqldo "insert into client_version(serial,os,utils) values('${ALX_SERIAL}','${alx_os}','${alx_utils}')" | ||
443 | |||
444 | niro | 252 | evaluate_retval |
445 | niro | 221 | } |
446 | |||
447 | niro | 282 | # imports current settings to the database resolved by the hardware detection |
448 | niro | 337 | update_settings_in_db() |
449 | { | ||
450 | niro | 282 | # note: networking is always 'dhcp' if hw was autodetected |
451 | # note: default_domain/hostname is set in config.rc or exported | ||
452 | # note: we updating only hardware settings here ! | ||
453 | |||
454 | # to be safe, we do some sanity checks | ||
455 | [ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain | ||
456 | [ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx | ||
457 | |||
458 | # vars used by hwdetect | ||
459 | local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME | ||
460 | local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER | ||
461 | local MOUSETYPE XMOUSETYPE FULLNAME DEVICE | ||
462 | |||
463 | # get setting from hwdetect | ||
464 | source /etc/sysconfig/hwsetup/knoppix | ||
465 | source /etc/sysconfig/hwsetup/mouse | ||
466 | |||
467 | echo | ||
468 | echo -e ${COLMAGENTA}"Updating detected settings in database"${COLDEFAULT} | ||
469 | |||
470 | # network | ||
471 | echo -e " Network settings ..." | ||
472 | niro | 337 | if [[ ${ALX_CONFD_NETWORKING} = true ]] |
473 | then | ||
474 | # get settings | ||
475 | #source ${rc_base}/init.d/network &> /dev/null | ||
476 | for iface in $(onboot_interface_list ${network_settings}/net.*) | ||
477 | do | ||
478 | [[ $(< ${SETTINGSPATH}/confd-networking) != ${iface} ]] && continue | ||
479 | echo "WARNING: only importing settings for interface [ ${iface} ] !" | ||
480 | source ${network_settings}/net.${iface} || exit 1 | ||
481 | NETCARD_DRIVER="$(cat /etc/modules.d/net.${iface} | cut -d' ' -f3)" | ||
482 | niro | 282 | |
483 | niro | 348 | mysqldo "update cfg_network set |
484 | niro | 337 | hostname='${ALX_DEFAULT_HOSTNAME}', |
485 | module='${NETCARD_DRIVER}', | ||
486 | domain='${ALX_DEFAULT_DOMAIN}', | ||
487 | networking='${NETWORKING}', | ||
488 | netmask='${NETMASK}', | ||
489 | dns='${NAMESERVER}', | ||
490 | gateway='${GATEWAY}', | ||
491 | broadcast='${BROADCAST}', | ||
492 | ip='${IP}', | ||
493 | forcemacto='${FORCE_MAC_TO}', | ||
494 | wireless_bitrate='${WIRELESS_BITRATE}', | ||
495 | wireless_channel='${WIRELESS_CHANNEL}', | ||
496 | wireless_essid='${WIRELESS_ESSID}', | ||
497 | wireless_frequency='${WIRELESS_FREQUENCY}', | ||
498 | wireless_mode='${WIRELESS_MODE}', | ||
499 | wireless_nick='${WIRELESS_NICK}', | ||
500 | wireless_auth_mode='${WIRELESS_AUTH_MODE}', | ||
501 | wireless_key_length='${WIRELESS_KEY_LENGTH}', | ||
502 | wireless_key='${WIRELESS_KEY}', | ||
503 | wireless_key_ascii='${WIRELESS_KEY_ASCII}' | ||
504 | where serial=${ALX_SERIAL};" | ||
505 | |||
506 | # only insert the *FIRST* iface | ||
507 | break | ||
508 | done | ||
509 | else | ||
510 | niro | 348 | mysqldo "update cfg_network set |
511 | niro | 337 | hostname='${ALX_DEFAULT_HOSTNAME}', |
512 | module='${NETCARD_DRIVER}', | ||
513 | domain='${ALX_DEFAULT_DOMAIN}', | ||
514 | networking='dhcp' | ||
515 | where serial=${ALX_SERIAL};" | ||
516 | fi | ||
517 | niro | 282 | evaluate_retval |
518 | |||
519 | # xserver | ||
520 | echo -e " Graphic settings ..." | ||
521 | # xserver general | ||
522 | niro | 348 | mysqldo "update cfg_graphic set |
523 | niro | 282 | module='${XMODULE}', |
524 | resolution='1024x768', | ||
525 | depth='16', | ||
526 | niro | 1582 | refresh_rate='60' |
527 | niro | 282 | where serial=${ALX_SERIAL};" |
528 | evaluate_retval | ||
529 | |||
530 | # input | ||
531 | echo -e " Input settings ..." | ||
532 | niro | 348 | mysqldo "update cfg_input set mouse='${XMOUSETYPE}' where serial=${ALX_SERIAL};" |
533 | niro | 282 | evaluate_retval |
534 | niro | 1582 | |
535 | # version info | ||
536 | local alx_os | ||
537 | local alx_utils | ||
538 | alx_os="$(< /etc/mageversion)" | ||
539 | alx_utils="$(magequery -n alxconfig-ng-alx | sed 's:.*\[\ \(.*\)\ \].*:\1:')" | ||
540 | alx_utils="${alx_utils/alxconfig-ng-alx-}" | ||
541 | mysqldo "update client_version set os='${alx_os}', utils='${alx_utils}' where serial=${ALX_SERIAL};" | ||
542 | niro | 282 | } |
543 | |||
544 | niro | 221 | # imports current settings to the local system resolved by the hardware detection |
545 | niro | 337 | # we only need the network settings |
546 | import_settings_local() | ||
547 | { | ||
548 | niro | 282 | # note: networking is always 'dhcp' if hw was autodetected |
549 | # note: default_domain/hostname is set in config.rc | ||
550 | niro | 226 | |
551 | niro | 282 | # to be safe, we do some sanity checks |
552 | niro | 221 | [ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain |
553 | [ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx | ||
554 | niro | 226 | |
555 | niro | 282 | # vars used by hwdetect |
556 | niro | 221 | local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME |
557 | local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER | ||
558 | local MOUSETYPE XMOUSETYPE FULLNAME DEVICE | ||
559 | |||
560 | niro | 282 | # get setting from hwdetect |
561 | niro | 221 | source /etc/sysconfig/hwsetup/knoppix |
562 | niro | 226 | |
563 | niro | 221 | echo |
564 | echo -e ${COLMAGENTA}"Importing detected settings to local system"${COLDEFAULT} | ||
565 | |||
566 | niro | 337 | if [[ ${ALX_CONFD_NETWORKING} = false ]] |
567 | then | ||
568 | #[ ! -d ${SETTINGSPATH} ] && install -d ${SETTINGSPATH} | ||
569 | #echo "${NETCARD_DRIVER}" > ${SETTINGSPATH}/modules | ||
570 | niro | 221 | |
571 | niro | 1622 | # set an device alias for modprobe.conf and modules.conf |
572 | niro | 337 | [ ! -d /etc/modules.d ] && install -d /etc/modules.d |
573 | niro | 1622 | [ ! -d /etc/modprobe.d ] && install -d /etc/modprobe.d |
574 | niro | 337 | echo "alias eth0 ${NETCARD_DRIVER}" > /etc/modules.d/net.eth0 |
575 | niro | 1622 | echo "alias eth0 ${NETCARD_DRIVER}" > /etc/modprobe.d/net.eth0 |
576 | niro | 337 | |
577 | # regenerate modprobe.conf | ||
578 | [ -x $(which modules-update) ] && modules-update || echo "cannot regen modprobe.conf" | ||
579 | evaluate_retval | ||
580 | fi | ||
581 | |||
582 | niro | 282 | # set system state to 'already configured' |
583 | niro | 226 | touch /etc/alxconfig-ng/state/configured |
584 | niro | 252 | |
585 | niro | 313 | # if only an recheck was forced than abort now |
586 | [[ ${ALX_FORCED_RECHECK} = true ]] && return 0 | ||
587 | |||
588 | niro | 275 | # create a fresh fluxbox directory |
589 | [ -d ${ALX_UNPRIV_HOME}/.fluxbox ] && rm -rf ${ALX_UNPRIV_HOME}/.fluxbox | ||
590 | install -d ${ALX_UNPRIV_HOME}/.fluxbox | ||
591 | |||
592 | # now generate fluxbox config files | ||
593 | |||
594 | # fluxbox main config | ||
595 | cat ${ALX_SKELETONS}/fluxbox/init \ | ||
596 | > ${ALX_UNPRIV_HOME}/.fluxbox/init | ||
597 | |||
598 | niro | 319 | # fluxbox autostart |
599 | cat ${ALX_SKELETONS}/fluxbox/apps \ | ||
600 | > ${ALX_UNPRIV_HOME}/.fluxbox/apps | ||
601 | |||
602 | niro | 275 | # fluxbox menu header |
603 | cat ${ALX_SKELETONS}/fluxbox/menu.header \ | ||
604 | > ${ALX_UNPRIV_HOME}/.fluxbox/menu | ||
605 | |||
606 | niro | 297 | # now fix it with proper messages :P |
607 | local ver="$(< /etc/mageversion)" | ||
608 | sed -i "s:@CHANGEME@:alx-${ver} #${ALX_SERIAL}:g" \ | ||
609 | ${ALX_UNPRIV_HOME}/.fluxbox/menu | ||
610 | |||
611 | niro | 275 | # add a newline (maybe there is no crlf in the header) |
612 | echo >> ${ALX_UNPRIV_HOME}/.fluxbox/menu | ||
613 | |||
614 | # fluxbox menu footer | ||
615 | cat ${ALX_SKELETONS}/fluxbox/menu.footer \ | ||
616 | >> ${ALX_UNPRIV_HOME}/.fluxbox/menu | ||
617 | |||
618 | # add a newline (maybe there is no crlf in the footer) | ||
619 | echo >> ${ALX_UNPRIV_HOME}/.fluxbox/menu | ||
620 | |||
621 | niro | 313 | |
622 | # setup some standart icons (sysinfo.lnk) | ||
623 | # basic config | ||
624 | cat ${ALX_SKELETONS}/xtdesktop/xtdeskrc > ${ALX_UNPRIV_HOME}/.xtdeskrc | ||
625 | |||
626 | # clean desktop icon location | ||
627 | [ -d ${ALX_UNPRIV_HOME}/.xtdesktop ] && rm -rf ${ALX_UNPRIV_HOME}/.xtdesktop | ||
628 | install -d ${ALX_UNPRIV_HOME}/.xtdesktop | ||
629 | |||
630 | # last but not least gen a icon with some sys informations | ||
631 | local sysinfo | ||
632 | local osversion | ||
633 | local xres | ||
634 | local yres | ||
635 | |||
636 | osversion="$(< /etc/mageversion)" | ||
637 | sysinfo="Hostname: ${ALX_DEFAULT_HOSTNAME} Serial: #${ALX_SERIAL} OS: alx-${osversion} Kernel: $(uname -r)" | ||
638 | |||
639 | # at first boot we got always a resolution of 1024x768-16@60 | ||
640 | # middle of the screen | ||
641 | # (no txt - length required, xtdesk manage that itself) | ||
642 | xres="$((1024 / 2))" | ||
643 | # default y pos (full yres -22 !) | ||
644 | yres="$((768 - 22 ))" | ||
645 | |||
646 | generate_icon \ | ||
647 | --name "${sysinfo}" \ | ||
648 | --command "exit 0" \ | ||
649 | --icon "${ALX_SESSIONS_ICONS}/sysinfo.png" \ | ||
650 | --dest "${ALX_UNPRIV_HOME}/.xtdesktop/sysinfo.lnk" \ | ||
651 | --xres "${xres}" \ | ||
652 | --yres "${yres}" \ | ||
653 | --icon-width "1" \ | ||
654 | --icon-height "1" | ||
655 | |||
656 | niro | 368 | # create a xinitrc |
657 | echo "exec startfluxbox" > ${ALX_UNPRIV_HOME}/.xinitrc | ||
658 | |||
659 | niro | 282 | # set correct permissions |
660 | chown ${ALX_UNPRIV_USER}:${ALX_UNPRIV_GROUP} ${ALX_UNPRIV_HOME} | ||
661 | chown ${ALX_UNPRIV_USER}:${ALX_UNPRIV_GROUP} ${ALX_UNPRIV_HOME}/.fluxbox | ||
662 | chmod 0755 ${ALX_UNPRIV_HOME}/.fluxbox | ||
663 | niro | 348 | chmod 0755 ${ALX_UNPRIV_HOME}/.xtdesktop |
664 | chmod 0644 ${ALX_UNPRIV_HOME}/.xtdeskrc | ||
665 | niro | 368 | chmod 0644 ${ALX_UNPRIV_HOME}/.xinitrc |
666 | niro | 221 | } |
667 | |||
668 | niro | 282 | # start|stop |
669 | niro | 337 | preliminary_network() |
670 | { | ||
671 | niro | 221 | local module |
672 | niro | 226 | |
673 | if [ -f /etc/alxconfig-ng/state/configured ] | ||
674 | niro | 221 | then |
675 | niro | 337 | # compat for old clients |
676 | if [ -f ${SETTINGSPATH}/modules ] | ||
677 | then | ||
678 | # get module name | ||
679 | module=$(cat ${SETTINGSPATH}/modules) | ||
680 | modprobe ${module} | ||
681 | fi | ||
682 | niro | 221 | else |
683 | niro | 282 | # vars used by hwdetect |
684 | niro | 221 | local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME |
685 | local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER | ||
686 | niro | 226 | |
687 | niro | 282 | # get setting from hwdetect |
688 | niro | 221 | source /etc/sysconfig/hwsetup/knoppix |
689 | modprobe ${NETCARD_DRIVER} | ||
690 | fi | ||
691 | niro | 226 | |
692 | niro | 221 | case $1 in |
693 | start) | ||
694 | # keeping like always safe: | ||
695 | # no network should be startet here, | ||
696 | # so we can delete all pid files if one exists | ||
697 | if ps -A|grep dhcpcd > /dev/null | ||
698 | then | ||
699 | echo -e ${COLMAGENTA}"Forcing network down"${COLDEFAULT} | ||
700 | dhcpcd -k | ||
701 | sleep 1 | ||
702 | else | ||
703 | rm -f /var/run/dhcpcd-eth?.pid | ||
704 | fi | ||
705 | niro | 348 | [[ ${ALX_CONFD_NETWORKING} = true ]] && [[ ${RUNLEVEL} != S ]] && \ |
706 | ${rc_base}/init.d/network stop | ||
707 | niro | 226 | |
708 | niro | 337 | echo -e ${COLMAGENTA}"Starting preliminary networking ... "${COLDEFAULT} |
709 | niro | 226 | |
710 | niro | 337 | # start network configured from /etc/conf.d |
711 | if [[ ${ALX_CONFD_NETWORKING} = true ]] | ||
712 | then | ||
713 | ${rc_base}/init.d/network start | ||
714 | else | ||
715 | echo -e ${COLOREDSTAR}"Starting default dhcp based networking ... "${COLDEFAULT} | ||
716 | # -t 10 timeout of 10 secs | ||
717 | dhcpcd -t 10 &> /dev/null | ||
718 | evaluate_retval | ||
719 | fi | ||
720 | niro | 221 | ;; |
721 | niro | 226 | |
722 | niro | 221 | stop) |
723 | niro | 337 | echo -e ${COLMAGENTA}"Stopping preliminary networking ... "${COLDEFAULT} |
724 | if [[ ${ALX_CONFD_NETWORKING} = true ]] | ||
725 | then | ||
726 | ${rc_base}/init.d/network stop | ||
727 | else | ||
728 | echo -e ${COLOREDSTAR}"Stopping default dhcp based networking ... "${COLDEFAULT} | ||
729 | ifconfig eth0 down | ||
730 | fi | ||
731 | niro | 221 | if ps -A|grep dhcpcd > /dev/null |
732 | then | ||
733 | dhcpcd -z &> /dev/null | ||
734 | niro | 1596 | sleep 1 |
735 | niro | 221 | fi |
736 | evaluate_retval | ||
737 | ;; | ||
738 | niro | 226 | |
739 | niro | 221 | *) |
740 | echo "Usage: preliminary_network {start|stop}" | ||
741 | ;; | ||
742 | esac | ||
743 | } | ||
744 | |||
745 | niro | 337 | reset_system_settings() |
746 | { | ||
747 | # force load of de kbdkeys | ||
748 | loadkeys -q de | ||
749 | echo | ||
750 | echo -en ${COLRED} | ||
751 | echo -n "*** Warning: you are about to reset *all* local settings on this system!" | ||
752 | echo -e ${COLDEFAULT} | ||
753 | echo "*** Do you really want to continue ?" | ||
754 | echo -n "*** Enter 'yes' to continue, anything else to abort: " | ||
755 | read kbinsert | ||
756 | if [[ ${kbinsert} = yes ]] | ||
757 | then | ||
758 | echo -en ${COLRED} | ||
759 | echo -n "*** OK, you really want it ... killing all settings: " | ||
760 | for i in 3 2 1 now | ||
761 | do | ||
762 | echo -n " ${i}" | ||
763 | sleep 1 | ||
764 | done | ||
765 | echo -e ${COLDEFAULT} | ||
766 | |||
767 | ## reset all settings: | ||
768 | rm -rf ${SETTINGSPATH}/* | ||
769 | rm -f /etc/alxconfig-ng/serial | ||
770 | rm -rf /etc/alxconfig-ng/state | ||
771 | |||
772 | niro | 357 | # clear all printers & net-shares |
773 | :> /etc/cups/printers.conf | ||
774 | :> /etc/samba/smb.conf | ||
775 | |||
776 | # remove inetd, cups & smb from init | ||
777 | rc-config del inetd &> /dev/null | ||
778 | rc-config del cups &> /dev/null | ||
779 | rc-config del samba &> /dev/null | ||
780 | |||
781 | # remove all user settings | ||
782 | [ -d ${ALX_UNPRIV_HOME} ] && rm -rf ${ALX_UNPRIV_HOME} | ||
783 | |||
784 | # remove all ica-sessions | ||
785 | niro | 359 | find ${ALX_ICA_SESSIONS} -type f -name '*.ica' | xargs rm |
786 | niro | 357 | |
787 | # remove all old nics and modules configs | ||
788 | find /etc/conf.d -type f -name 'net.*' | xargs rm | ||
789 | find /etc/modules.d -type f -name 'net.*' | xargs rm | ||
790 | |||
791 | # restore default networking | ||
792 | cat ${ALX_SKELETONS}/net/net.eth0 > /etc/conf.d/net.eth0 | ||
793 | |||
794 | niro | 337 | echo "I am done now, press [Enter] to reboot system ..." |
795 | niro | 348 | else |
796 | echo "Aborted, press [Enter] to reboot system ..." | ||
797 | niro | 337 | fi |
798 | niro | 348 | read |
799 | reboot | ||
800 | niro | 337 | } |
801 | |||
802 | onboot_interface_list() | ||
803 | { | ||
804 | local file | ||
805 | local devices | ||
806 | local iface | ||
807 | |||
808 | # get list of all devices | ||
809 | for file in $@ | ||
810 | do | ||
811 | if [[ $(read_value ONBOOT ${file}) = yes ]] | ||
812 | then | ||
813 | iface="$(basename ${file} | sed s/net.//)" | ||
814 | # exclude backup files | ||
815 | case "${iface}" in | ||
816 | *~) ;; | ||
817 | *) devices="${devices} $(basename ${file} | sed s/net.//)" ;; | ||
818 | esac | ||
819 | fi | ||
820 | done | ||
821 | |||
822 | echo "${devices}" | ||
823 | } | ||
824 | |||
825 | niro | 348 | # read values from net.* files |
826 | niro | 337 | read_value() |
827 | { | ||
828 | local var="$1" | ||
829 | local file="$2" | ||
830 | local value | ||
831 | |||
832 | # local all possible vars | ||
833 | # global | ||
834 | local ONBOOT | ||
835 | local NETWORKING | ||
836 | |||
837 | # static | ||
838 | local IP | ||
839 | local NETMASK | ||
840 | local BROADCAST | ||
841 | local NETWORKING | ||
842 | local FORCE_MAC_TO | ||
843 | |||
844 | # dhcp | ||
845 | local DHCP_PROG | ||
846 | local DHCP_START | ||
847 | local DHCP_STOP | ||
848 | |||
849 | # default gw | ||
850 | local GATEWAY | ||
851 | local GATEWAY_IF | ||
852 | |||
853 | # wireless extensions | ||
854 | local WIRELESS_AP | ||
855 | local WIRELESS_AUTH_MODE | ||
856 | local WIRELESS_BITRATE | ||
857 | local WIRELESS_CHANNEL | ||
858 | local WIRELESS_DEFAULT_KEY | ||
859 | local WIRELESS_ESSID | ||
860 | local WIRELESS_FREQUENCY | ||
861 | local WIRELESS_KEY | ||
862 | local WIRELESS_KEY_ASCII | ||
863 | local WIRELESS_KEY_0 | ||
864 | local WIRELESS_KEY_1 | ||
865 | local WIRELESS_KEY_2 | ||
866 | local WIRELESS_KEY_3 | ||
867 | local WIRELESS_KEY_LENGTH | ||
868 | local WIRELESS_MODE | ||
869 | local WIRELESS_NICK | ||
870 | local WIRELESS_NWID | ||
871 | local WIRELESS_POWER | ||
872 | |||
873 | source ${file} | ||
874 | eval value=\$$(echo ${var}) | ||
875 | echo "${value}" | ||
876 | } | ||
877 | |||
878 | niro | 221 | case $1 in |
879 | start) | ||
880 | niro | 337 | # check for global overrides |
881 | [ -f ${SETTINGSPATH}/confd-networking ] && ALX_CONFD_NETWORKING=true | ||
882 | [ -f /hardware-auto-detection ] && ALX_FORCED_RECHECK=true | ||
883 | read_cmdline hardware-auto-detection && ALX_FORCED_RECHECK=true | ||
884 | read_cmdline alx-reset-settings && ALX_RESET_SETTINGS=true | ||
885 | |||
886 | # kill all settings if requested | ||
887 | if [[ ${ALX_RESET_SETTINGS} = true ]] | ||
888 | then | ||
889 | reset_system_settings | ||
890 | fi | ||
891 | |||
892 | niro | 282 | # retrieve or validate current serial |
893 | niro | 221 | get_system_serial |
894 | niro | 282 | if [[ ${ALX_HW_DETECT} = true ]] |
895 | niro | 221 | then |
896 | niro | 282 | if [[ ${ALX_FORCED_RECHECK} = true ]] |
897 | then | ||
898 | update_settings_in_db | ||
899 | else | ||
900 | import_settings_to_db | ||
901 | fi | ||
902 | niro | 221 | import_settings_local |
903 | niro | 252 | |
904 | # here we should also exchange the ssh keys | ||
905 | # or the system cannot be rebooted after | ||
906 | # the first start via the alx-webadmin | ||
907 | config_ssh_auth | ||
908 | niro | 221 | fi |
909 | niro | 252 | |
910 | niro | 282 | # now setup system configuration |
911 | # alx_setup_or_whatever_it_will_be_called() | ||
912 | niro | 348 | [[ ${ALX_HW_DETECT} = false ]] && update_system_settings |
913 | niro | 221 | |
914 | niro | 282 | # stop at last the preliminary networking (dhcp) |
915 | niro | 221 | preliminary_network stop |
916 | ;; | ||
917 | niro | 282 | |
918 | niro | 221 | stop) |
919 | niro | 282 | # unset_alx_connected #--> now in alxsetstate-rc6 |
920 | niro | 221 | # ! important !: del systemstate |
921 | niro | 226 | [ -f /etc/alxconfig-ng/state/state ] && rm /etc/alxconfig-ng/state/state |
922 | niro | 221 | sleep 0.1 |
923 | ;; | ||
924 | *) | ||
925 | echo "Usage: $0 {start|stop} ..." | ||
926 | ;; | ||
927 | esac | ||
928 | niro | 252 |
Properties
Name | Value |
---|---|
svn:executable | * |