Annotation of /alx-src/branches/alxconf-060/init.d/alxsettings
Parent Directory | Revision Log
Revision 2156 -
(hide annotations)
(download)
Tue May 17 21:41:48 2011 UTC (13 years, 4 months ago) by niro
File size: 23190 byte(s)
Tue May 17 21:41:48 2011 UTC (13 years, 4 months ago) by niro
File size: 23190 byte(s)
-variable dhcp client trough config.rc
1 | niro | 221 | #!/bin/bash |
2 | niro | 1976 | # $Id$ |
3 | niro | 221 | # <niro@magellan-linux.de> |
4 | |||
5 | niro | 2007 | #%rlevels: 7:s 0:k |
6 | niro | 221 | #%start: 41 |
7 | #%stop: 01 | ||
8 | |||
9 | #deps | ||
10 | #%needs: | ||
11 | #%before: | ||
12 | #%after: | ||
13 | |||
14 | # checks first if the client was already configured and if it has an valid serial | ||
15 | # if not it runs the autoconfiguration script | ||
16 | # these settings will be used for client setup | ||
17 | # | ||
18 | # if client was valid it first will check if his settings against the server | ||
19 | # if no changes are at server side they will be kept, if yes the get updated. | ||
20 | # the server settings has higher priority. | ||
21 | |||
22 | niro | 1976 | source /etc/conf.d/rc |
23 | niro | 221 | source $rc_functions |
24 | |||
25 | niro | 282 | # mysql settings |
26 | niro | 226 | source /etc/alxconfig-ng/config.rc |
27 | niro | 282 | |
28 | # helper functions | ||
29 | niro | 2039 | source /usr/lib/alxconfig-ng/functions/common |
30 | niro | 226 | source /usr/lib/alxconfig-ng/functions/mysqlfunctions |
31 | niro | 227 | source /usr/lib/alxconfig-ng/functions/serial_functions |
32 | niro | 257 | source /usr/lib/alxconfig-ng/functions/config_modules |
33 | niro | 226 | source /usr/lib/alxconfig-ng/functions/config_network |
34 | source /usr/lib/alxconfig-ng/functions/config_printers | ||
35 | niro | 239 | source /usr/lib/alxconfig-ng/functions/config_sessions |
36 | niro | 226 | source /usr/lib/alxconfig-ng/functions/config_x11 |
37 | niro | 248 | source /usr/lib/alxconfig-ng/functions/config_auth |
38 | niro | 252 | source /usr/lib/alxconfig-ng/functions/config_ssh_auth |
39 | niro | 1582 | source /usr/lib/alxconfig-ng/functions/config_versions |
40 | niro | 221 | |
41 | niro | 282 | # other needed vars |
42 | niro | 221 | ALX_HW_DETECT=false |
43 | niro | 282 | ALX_FORCED_RECHECK=false |
44 | niro | 337 | ALX_RESET_SETTINGS=false |
45 | ALX_CONFD_NETWORKING=false | ||
46 | niro | 221 | |
47 | niro | 282 | # unset vars which may kill us |
48 | niro | 221 | unset ALX_SERIAL ALX_STATE |
49 | |||
50 | |||
51 | niro | 282 | # setup needed directories |
52 | niro | 226 | [ ! -d /etc/alxconfig-ng/state ] && install -d /etc/alxconfig-ng/state |
53 | niro | 221 | |
54 | |||
55 | niro | 337 | # read_cmdline ${item} |
56 | read_cmdline() | ||
57 | { | ||
58 | local i | ||
59 | |||
60 | for i in $(< /proc/cmdline) | ||
61 | do | ||
62 | [[ ${i} = $1 ]] && return 0 | ||
63 | done | ||
64 | |||
65 | return 1 | ||
66 | } | ||
67 | |||
68 | update_system_settings() | ||
69 | { | ||
70 | niro | 2153 | rc_mecho Checking system setup ... |
71 | niro | 221 | |
72 | niro | 257 | # get the modules settings |
73 | # ! is the first thing that must be configured ! | ||
74 | config_modules | ||
75 | |||
76 | niro | 226 | # imports network settings from db |
77 | config_networking | ||
78 | |||
79 | # imports x11 settings from db | ||
80 | config_x11 | ||
81 | |||
82 | niro | 248 | # imports session settings from db |
83 | niro | 239 | config_sessions |
84 | niro | 226 | |
85 | # imports printer settings from db | ||
86 | config_printing | ||
87 | niro | 248 | |
88 | # imports auth settings from db | ||
89 | config_auth | ||
90 | niro | 252 | |
91 | # exchange ssh rsa keys | ||
92 | niro | 265 | HOME=/root config_ssh_auth |
93 | niro | 1582 | |
94 | # import version info | ||
95 | config_version | ||
96 | niro | 221 | } |
97 | |||
98 | niro | 337 | get_system_serial() |
99 | { | ||
100 | niro | 350 | local CUR_IP CUR_MAC CUR_MTIME ALX_IFACE |
101 | niro | 221 | |
102 | niro | 350 | if [[ ${ALX_CONFD_NETWORKING} = true ]] |
103 | then | ||
104 | ALX_IFACE="$(< ${SETTINGSPATH}/confd-networking)" | ||
105 | else | ||
106 | ALX_IFACE="eth0" | ||
107 | fi | ||
108 | |||
109 | niro | 282 | # check if serial file exists |
110 | niro | 337 | if [ -f /etc/alxconfig-ng/serial ] && [[ ${ALX_FORCED_RECHECK} = false ]] |
111 | niro | 221 | then |
112 | niro | 226 | source /etc/alxconfig-ng/serial |
113 | |||
114 | niro | 282 | # start preliminary networking (dhcp) |
115 | niro | 295 | preliminary_network start |
116 | niro | 226 | |
117 | niro | 295 | # check if mysql server is reachable |
118 | # if not abort this script | ||
119 | if ! reach_mysql_server | ||
120 | then | ||
121 | preliminary_network stop | ||
122 | exit 1 | ||
123 | fi | ||
124 | |||
125 | niro | 1976 | CUR_IP=$(ifconfig ${ALX_IFACE} | sed -n '/addr:/s/ [^r]*..//gp') |
126 | CUR_MAC=$(ifconfig ${ALX_IFACE} | grep HWaddr | cut -d ' ' -f11) | ||
127 | niro | 221 | CUR_MTIME=$(date +%s) |
128 | niro | 226 | |
129 | niro | 2141 | rc_print "Trying to validate my serial ..." |
130 | niro | 226 | |
131 | niro | 282 | # nice serial output |
132 | niro | 221 | $CURS_UP |
133 | $SET_WCOL | ||
134 | echo "[ SN: ${ALX_SERIAL} ]" | ||
135 | |||
136 | if validate_serial "${ALX_SERIAL}" "${ALX_REG_DATE}" "${CUR_MAC}" | ||
137 | then | ||
138 | ALX_STATE="ok" | ||
139 | else | ||
140 | niro | 307 | # abort on non valid serial |
141 | niro | 221 | ALX_STATE="invalid serial" |
142 | niro | 1616 | echo "ALX_STATE=\"${ALX_STATE}\"" > /etc/alxconfig-ng/state/state |
143 | niro | 307 | show_invalid_serial_msg |
144 | exit 1 | ||
145 | niro | 221 | fi |
146 | |||
147 | else | ||
148 | niro | 282 | # run hardware detection |
149 | niro | 221 | echo |
150 | niro | 337 | if [[ ${ALX_FORCED_RECHECK} = true ]] |
151 | niro | 282 | then |
152 | niro | 2141 | rc_mecho "Hardware autodetection forced by system-administrator" |
153 | niro | 1622 | # always disable CONFD_NETWORKING here |
154 | export ALX_CONFD_NETWORKING="false" | ||
155 | niro | 282 | else |
156 | niro | 2141 | rc_mecho "Preparing system for first boot" |
157 | niro | 282 | fi |
158 | niro | 221 | ALX_HW_DETECT=true |
159 | niro | 2009 | hwsetup |
160 | niro | 226 | |
161 | niro | 282 | # set hostname to alx_default_hostname |
162 | # use old hostname if this is a forced re-check | ||
163 | niro | 337 | [[ ${ALX_FORCED_RECHECK} = true ]] && ALX_DEFAULT_HOSTNAME="$(< /etc/hostname)" |
164 | niro | 221 | [ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx |
165 | HOSTNAME="${ALX_DEFAULT_HOSTNAME}" | ||
166 | niro | 226 | |
167 | niro | 282 | # update the hostname on the system for sure |
168 | niro | 230 | echo "${HOSTNAME}" > /etc/hostname |
169 | niro | 226 | |
170 | niro | 282 | # start preliminary networking (dhcp) |
171 | niro | 221 | preliminary_network start |
172 | niro | 226 | |
173 | niro | 295 | # check if mysql server is reachable |
174 | # if not abort this script | ||
175 | if ! reach_mysql_server | ||
176 | then | ||
177 | preliminary_network stop | ||
178 | exit 1 | ||
179 | fi | ||
180 | |||
181 | niro | 2039 | |
182 | niro | 221 | CUR_IP=$(/sbin/ifconfig eth0 | sed -n '/addr:/s/ [^r]*..//gp') |
183 | CUR_MAC=$(/sbin/ifconfig eth0 | grep HWaddr | cut -d ' ' -f11) | ||
184 | CUR_MTIME=$(date +%s) | ||
185 | niro | 226 | |
186 | niro | 282 | # abort now if this is a forced re-check |
187 | niro | 337 | if [[ ${ALX_FORCED_RECHECK} = true ]] |
188 | niro | 282 | then |
189 | # but first check the serial | ||
190 | source /etc/alxconfig-ng/serial | ||
191 | |||
192 | niro | 2141 | rc_print "Trying to validate my serial ..." |
193 | niro | 282 | |
194 | # nice serial output | ||
195 | $CURS_UP | ||
196 | $SET_WCOL | ||
197 | echo "[ SN: ${ALX_SERIAL} ]" | ||
198 | |||
199 | if validate_serial "${ALX_SERIAL}" "${ALX_REG_DATE}" "${CUR_MAC}" | ||
200 | then | ||
201 | ALX_STATE="ok" | ||
202 | else | ||
203 | niro | 307 | # abort on non valid serial |
204 | niro | 282 | ALX_STATE="invalid serial" |
205 | niro | 307 | echo "ALX_STATE=${ALX_STATE}" > /etc/alxconfig-ng/state/state |
206 | show_invalid_serial_msg | ||
207 | exit 1 | ||
208 | niro | 282 | fi |
209 | |||
210 | # write current state to temp file | ||
211 | niro | 1616 | echo "ALX_STATE=\"${ALX_STATE}\"" > /etc/alxconfig-ng/state/state |
212 | niro | 337 | [ -f /hardware-auto-detection ] && rm /hardware-auto-detection |
213 | niro | 282 | |
214 | # now export ALX_FORCED_RECHECK=true | ||
215 | # that the setting will be updated not inserted ! | ||
216 | export ALX_FORCED_RECHECK=true | ||
217 | return 0 | ||
218 | fi | ||
219 | |||
220 | niro | 2141 | rc_print "Trying to get new serial ..." |
221 | niro | 226 | |
222 | niro | 313 | # request a new serial; one command now (cause must be done in the same session) |
223 | niro | 348 | ALX_SERIAL=$(mysqldo "insert into client_serials (mtime, mac) values('${CUR_MTIME}','${CUR_MAC}'); |
224 | niro | 314 | select last_insert_id();") |
225 | niro | 221 | |
226 | niro | 337 | if [[ ${ALX_SERIAL} != NULL ]] |
227 | niro | 221 | then |
228 | niro | 282 | # nice serial output |
229 | niro | 221 | $CURS_UP |
230 | $SET_WCOL | ||
231 | echo "[ SN: ${ALX_SERIAL} ]" | ||
232 | niro | 226 | |
233 | niro | 348 | # set ALX_STATE to ok so everybody knows that everything was ok |
234 | niro | 221 | ALX_STATE=ok |
235 | niro | 226 | |
236 | niro | 1616 | echo "ALX_SERIAL=\"${ALX_SERIAL}\"" > /etc/alxconfig-ng/serial |
237 | echo "ALX_REG_DATE=\"${CUR_MTIME}\"" >> /etc/alxconfig-ng/serial | ||
238 | niro | 226 | |
239 | niro | 221 | evaluate_retval |
240 | else | ||
241 | niro | 282 | # print false (works only if this is the first statement here) |
242 | niro | 221 | evaluate_retval |
243 | niro | 226 | |
244 | niro | 282 | # set ALX_STATE to error so everybody sees there was an error |
245 | niro | 221 | ALX_STATE=error |
246 | niro | 226 | |
247 | niro | 282 | # show an error that no new serial was found |
248 | # nice serial output | ||
249 | niro | 221 | $CURS_UP |
250 | $SET_WCOL | ||
251 | echo -e "[ SN: ${COLRED}None, 0${COLDEFAULT} ]" | ||
252 | fi | ||
253 | fi | ||
254 | niro | 226 | |
255 | niro | 282 | # write current state to temp file |
256 | niro | 1616 | echo "ALX_STATE=\"${ALX_STATE}\"" > /etc/alxconfig-ng/state/state |
257 | echo "ALX_IFACE=\"${ALX_IFACE}\"" >> /etc/alxconfig-ng/state/state | ||
258 | niro | 221 | } |
259 | |||
260 | |||
261 | niro | 337 | check_is_configured() |
262 | { | ||
263 | niro | 226 | if [ -f /etc/alxconfig-ng/state/configured ] |
264 | niro | 221 | then |
265 | export ALX_CONFIGURED=true | ||
266 | else | ||
267 | export ALX_CONFIGURED=false | ||
268 | fi | ||
269 | } | ||
270 | |||
271 | |||
272 | # imports current settings to the database resolved by the hardware detection | ||
273 | niro | 337 | import_settings_to_db() |
274 | { | ||
275 | niro | 282 | # note: networking is always 'dhcp' if hw was autodetected |
276 | # note: default_domain/hostname is set in config.rc | ||
277 | niro | 229 | |
278 | niro | 282 | # to be safe, we do some sanity checks |
279 | niro | 221 | [ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain |
280 | [ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx | ||
281 | niro | 229 | |
282 | niro | 2009 | # vars used by hwsetup |
283 | niro | 221 | local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME |
284 | local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER | ||
285 | local MOUSETYPE XMOUSETYPE FULLNAME DEVICE | ||
286 | niro | 229 | |
287 | niro | 2009 | # get setting from hwsetup |
288 | niro | 2008 | source /etc/conf.d/hwsetup/knoppix |
289 | source /etc/conf.d/hwsetup/mouse | ||
290 | niro | 229 | |
291 | niro | 221 | echo |
292 | niro | 2141 | rc_mecho "Importing detected settings to database" |
293 | niro | 229 | |
294 | niro | 282 | # network |
295 | niro | 2141 | rc_mecho " Network settings ..." |
296 | niro | 337 | if [[ ${ALX_CONFD_NETWORKING} = true ]] |
297 | then | ||
298 | # get settings | ||
299 | for iface in $(onboot_interface_list ${network_settings}/net.*) | ||
300 | do | ||
301 | [[ $(< ${SETTINGSPATH}/confd-networking) != ${iface} ]] && continue | ||
302 | niro | 2141 | rc_echo "WARNING: only importing settings for interface [ ${iface} ] !" |
303 | source ${network_settings}/net.${iface} || echo "Error: could not read '${network_settings}/net.${iface}'" | ||
304 | niro | 2122 | NETCARD_DRIVER="$(cat /etc/modprobe.d/net.${iface}.conf | cut -d' ' -f3)" |
305 | niro | 337 | |
306 | niro | 348 | mysqldo "insert into cfg_network( |
307 | niro | 337 | hostname, |
308 | serial, | ||
309 | module, | ||
310 | domain, | ||
311 | networking, | ||
312 | netmask, | ||
313 | dns, | ||
314 | gateway, | ||
315 | broadcast, | ||
316 | ip, | ||
317 | forcemacto, | ||
318 | wireless_bitrate, | ||
319 | wireless_channel, | ||
320 | wireless_essid, | ||
321 | wireless_frequency, | ||
322 | wireless_mode, | ||
323 | wireless_nick, | ||
324 | wireless_auth_mode, | ||
325 | wireless_key_length, | ||
326 | wireless_key, | ||
327 | wireless_key_ascii | ||
328 | ) | ||
329 | values( | ||
330 | '${ALX_DEFAULT_HOSTNAME}', | ||
331 | '${ALX_SERIAL}', | ||
332 | '${NETCARD_DRIVER}', | ||
333 | '${ALX_DEFAULT_DOMAIN}', | ||
334 | '${NETWORKING}', | ||
335 | '${NETMASK}', | ||
336 | '${NAMESERVER}', | ||
337 | '${GATEWAY}', | ||
338 | '${BROADCAST}', | ||
339 | '${IP}', | ||
340 | '${FORCE_MAC_TO}', | ||
341 | '${WIRELESS_BITRATE}', | ||
342 | '${WIRELESS_CHANNEL}', | ||
343 | '${WIRELESS_ESSID}', | ||
344 | '${WIRELESS_FREQUENCY}', | ||
345 | '${WIRELESS_MODE}', | ||
346 | '${WIRELESS_NICK}', | ||
347 | '${WIRELESS_AUTH_MODE}', | ||
348 | '${WIRELESS_KEY_LENGTH}', | ||
349 | '${WIRELESS_KEY}', | ||
350 | '${WIRELESS_KEY_ASCII}' | ||
351 | );" | ||
352 | |||
353 | # only insert the *FIRST* iface | ||
354 | break | ||
355 | done | ||
356 | else | ||
357 | niro | 348 | mysqldo "insert into cfg_network( |
358 | niro | 337 | hostname, |
359 | serial, | ||
360 | module, | ||
361 | domain, | ||
362 | networking | ||
363 | ) | ||
364 | values( | ||
365 | '${ALX_DEFAULT_HOSTNAME}', | ||
366 | '${ALX_SERIAL}', | ||
367 | '${NETCARD_DRIVER}', | ||
368 | '${ALX_DEFAULT_DOMAIN}', | ||
369 | 'dhcp' | ||
370 | );" | ||
371 | fi | ||
372 | niro | 221 | evaluate_retval |
373 | niro | 229 | |
374 | niro | 282 | # xserver |
375 | niro | 2141 | rc_mecho " Graphic settings ..." |
376 | niro | 282 | # xserver general |
377 | niro | 348 | ( mysqldo "insert into cfg_graphic( |
378 | niro | 221 | serial, |
379 | module, | ||
380 | resolution, | ||
381 | niro | 229 | depth, |
382 | niro | 1582 | refresh_rate |
383 | niro | 221 | ) |
384 | values( | ||
385 | '${ALX_SERIAL}', | ||
386 | '${XMODULE}', | ||
387 | '1024x768', | ||
388 | niro | 229 | '16', |
389 | niro | 1582 | '60' |
390 | niro | 252 | );"; ) |
391 | evaluate_retval | ||
392 | niro | 229 | |
393 | niro | 221 | # input |
394 | niro | 2141 | rc_mecho " Input settings ..." |
395 | niro | 348 | mysqldo "insert into cfg_input(serial,mouse) values('${ALX_SERIAL}','${XMOUSETYPE}');" |
396 | niro | 221 | evaluate_retval |
397 | niro | 252 | |
398 | # auth | ||
399 | niro | 2141 | rc_mecho " Authentification settings ..." |
400 | niro | 348 | mysqldo "insert into client_auth( |
401 | niro | 252 | serial, |
402 | username, | ||
403 | shell, | ||
404 | vnc, | ||
405 | samba, | ||
406 | station | ||
407 | ) | ||
408 | values( | ||
409 | '${ALX_SERIAL}', | ||
410 | '${ALX_UNPRIV_USER}', | ||
411 | '', | ||
412 | '', | ||
413 | '', | ||
414 | '' | ||
415 | );" | ||
416 | evaluate_retval | ||
417 | |||
418 | niro | 263 | # exchange ssh rsa keys - the first boot needs this ! |
419 | # or no reboot will work via the webadmin | ||
420 | niro | 2141 | rc_mecho " SSH authentification settings ..." |
421 | niro | 264 | HOME=/root config_ssh_auth |
422 | niro | 263 | evaluate_retval |
423 | |||
424 | niro | 348 | # autostart |
425 | niro | 2141 | rc_mecho " Autostart settings ..." |
426 | niro | 348 | mysqldo "insert into cfg_autostart(serial,session) values('${ALX_SERIAL}','');" |
427 | |||
428 | # screensaver | ||
429 | niro | 2141 | rc_mecho " Screensaver settings ..." |
430 | niro | 348 | mysqldo "insert into cfg_screensaver(serial,screensaver) values('${ALX_SERIAL}','')" |
431 | |||
432 | niro | 1582 | # version info |
433 | niro | 2141 | rc_mecho " OS version info ..." |
434 | niro | 1582 | local alx_os |
435 | local alx_utils | ||
436 | alx_os="$(< /etc/mageversion)" | ||
437 | alx_utils="$(magequery -n alxconfig-ng-alx | sed 's:.*\[\ \(.*\)\ \].*:\1:')" | ||
438 | alx_utils="${alx_utils/alxconfig-ng-alx-}" | ||
439 | mysqldo "insert into client_version(serial,os,utils) values('${ALX_SERIAL}','${alx_os}','${alx_utils}')" | ||
440 | |||
441 | niro | 252 | evaluate_retval |
442 | niro | 221 | } |
443 | |||
444 | niro | 282 | # imports current settings to the database resolved by the hardware detection |
445 | niro | 337 | update_settings_in_db() |
446 | { | ||
447 | niro | 282 | # note: networking is always 'dhcp' if hw was autodetected |
448 | # note: default_domain/hostname is set in config.rc or exported | ||
449 | # note: we updating only hardware settings here ! | ||
450 | |||
451 | # to be safe, we do some sanity checks | ||
452 | [ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain | ||
453 | [ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx | ||
454 | |||
455 | niro | 2009 | # vars used by hwsetup |
456 | niro | 282 | local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME |
457 | local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER | ||
458 | local MOUSETYPE XMOUSETYPE FULLNAME DEVICE | ||
459 | |||
460 | niro | 2009 | # get setting from hwsetup |
461 | niro | 2008 | source /etc/conf.d/hwsetup/knoppix |
462 | source /etc/conf.d/hwsetup/mouse | ||
463 | niro | 282 | |
464 | echo | ||
465 | niro | 2141 | rc_mecho "Updating detected settings in database" |
466 | niro | 282 | |
467 | # network | ||
468 | niro | 2141 | rc_mecho " Network settings ..." |
469 | niro | 337 | if [[ ${ALX_CONFD_NETWORKING} = true ]] |
470 | then | ||
471 | # get settings | ||
472 | #source ${rc_base}/init.d/network &> /dev/null | ||
473 | for iface in $(onboot_interface_list ${network_settings}/net.*) | ||
474 | do | ||
475 | [[ $(< ${SETTINGSPATH}/confd-networking) != ${iface} ]] && continue | ||
476 | niro | 2141 | rc_echo "WARNING: only importing settings for interface [ ${iface} ] !" |
477 | niro | 337 | source ${network_settings}/net.${iface} || exit 1 |
478 | niro | 2122 | NETCARD_DRIVER="$(cat /etc/modprobe.d/net.${iface}.conf | cut -d' ' -f3)" |
479 | niro | 282 | |
480 | niro | 348 | mysqldo "update cfg_network set |
481 | niro | 337 | hostname='${ALX_DEFAULT_HOSTNAME}', |
482 | module='${NETCARD_DRIVER}', | ||
483 | domain='${ALX_DEFAULT_DOMAIN}', | ||
484 | networking='${NETWORKING}', | ||
485 | netmask='${NETMASK}', | ||
486 | dns='${NAMESERVER}', | ||
487 | gateway='${GATEWAY}', | ||
488 | broadcast='${BROADCAST}', | ||
489 | ip='${IP}', | ||
490 | forcemacto='${FORCE_MAC_TO}', | ||
491 | wireless_bitrate='${WIRELESS_BITRATE}', | ||
492 | wireless_channel='${WIRELESS_CHANNEL}', | ||
493 | wireless_essid='${WIRELESS_ESSID}', | ||
494 | wireless_frequency='${WIRELESS_FREQUENCY}', | ||
495 | wireless_mode='${WIRELESS_MODE}', | ||
496 | wireless_nick='${WIRELESS_NICK}', | ||
497 | wireless_auth_mode='${WIRELESS_AUTH_MODE}', | ||
498 | wireless_key_length='${WIRELESS_KEY_LENGTH}', | ||
499 | wireless_key='${WIRELESS_KEY}', | ||
500 | wireless_key_ascii='${WIRELESS_KEY_ASCII}' | ||
501 | where serial=${ALX_SERIAL};" | ||
502 | |||
503 | # only insert the *FIRST* iface | ||
504 | break | ||
505 | done | ||
506 | else | ||
507 | niro | 348 | mysqldo "update cfg_network set |
508 | niro | 337 | hostname='${ALX_DEFAULT_HOSTNAME}', |
509 | module='${NETCARD_DRIVER}', | ||
510 | domain='${ALX_DEFAULT_DOMAIN}', | ||
511 | networking='dhcp' | ||
512 | where serial=${ALX_SERIAL};" | ||
513 | fi | ||
514 | niro | 282 | evaluate_retval |
515 | |||
516 | # xserver | ||
517 | niro | 2141 | rc_mecho " Graphic settings ..." |
518 | niro | 282 | # xserver general |
519 | niro | 348 | mysqldo "update cfg_graphic set |
520 | niro | 282 | module='${XMODULE}', |
521 | resolution='1024x768', | ||
522 | depth='16', | ||
523 | niro | 1582 | refresh_rate='60' |
524 | niro | 282 | where serial=${ALX_SERIAL};" |
525 | evaluate_retval | ||
526 | |||
527 | # input | ||
528 | niro | 2141 | rc_mecho " Input settings ..." |
529 | niro | 348 | mysqldo "update cfg_input set mouse='${XMOUSETYPE}' where serial=${ALX_SERIAL};" |
530 | niro | 282 | evaluate_retval |
531 | niro | 1582 | |
532 | # version info | ||
533 | niro | 2141 | rc_mecho " OS version info ..." |
534 | niro | 1582 | local alx_os |
535 | local alx_utils | ||
536 | alx_os="$(< /etc/mageversion)" | ||
537 | alx_utils="$(magequery -n alxconfig-ng-alx | sed 's:.*\[\ \(.*\)\ \].*:\1:')" | ||
538 | alx_utils="${alx_utils/alxconfig-ng-alx-}" | ||
539 | mysqldo "update client_version set os='${alx_os}', utils='${alx_utils}' where serial=${ALX_SERIAL};" | ||
540 | niro | 282 | } |
541 | |||
542 | niro | 221 | # imports current settings to the local system resolved by the hardware detection |
543 | niro | 337 | # we only need the network settings |
544 | import_settings_local() | ||
545 | { | ||
546 | niro | 282 | # note: networking is always 'dhcp' if hw was autodetected |
547 | # note: default_domain/hostname is set in config.rc | ||
548 | niro | 226 | |
549 | niro | 282 | # to be safe, we do some sanity checks |
550 | niro | 221 | [ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain |
551 | [ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx | ||
552 | niro | 226 | |
553 | niro | 2009 | # vars used by hwsetup |
554 | niro | 221 | local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME |
555 | local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER | ||
556 | local MOUSETYPE XMOUSETYPE FULLNAME DEVICE | ||
557 | |||
558 | niro | 2009 | # get setting from hwsetup |
559 | niro | 2008 | source /etc/conf.d/hwsetup/knoppix |
560 | niro | 226 | |
561 | niro | 221 | echo |
562 | niro | 2141 | rc_mecho "Importing detected settings to local system" |
563 | niro | 221 | |
564 | niro | 337 | if [[ ${ALX_CONFD_NETWORKING} = false ]] |
565 | then | ||
566 | niro | 2039 | # set an device alias for modprobe.conf |
567 | niro | 1622 | [ ! -d /etc/modprobe.d ] && install -d /etc/modprobe.d |
568 | niro | 2039 | echo "alias eth0 ${NETCARD_DRIVER}" > /etc/modprobe.d/net.eth0.conf |
569 | niro | 337 | |
570 | # regenerate modprobe.conf | ||
571 | niro | 2141 | [ -x $(which modules-update) ] && modules-update || rc_echo "modules-update not found!" |
572 | niro | 337 | evaluate_retval |
573 | fi | ||
574 | |||
575 | niro | 282 | # set system state to 'already configured' |
576 | niro | 226 | touch /etc/alxconfig-ng/state/configured |
577 | niro | 252 | |
578 | niro | 1715 | # install slim desktopmanager configuration |
579 | niro | 1718 | config_display_manager |
580 | niro | 1715 | |
581 | niro | 313 | # if only an recheck was forced than abort now |
582 | [[ ${ALX_FORCED_RECHECK} = true ]] && return 0 | ||
583 | |||
584 | niro | 275 | # create a fresh fluxbox directory |
585 | [ -d ${ALX_UNPRIV_HOME}/.fluxbox ] && rm -rf ${ALX_UNPRIV_HOME}/.fluxbox | ||
586 | install -d ${ALX_UNPRIV_HOME}/.fluxbox | ||
587 | |||
588 | # now generate fluxbox config files | ||
589 | |||
590 | # fluxbox main config | ||
591 | niro | 2039 | cat ${ALX_SKELETONS}/fluxbox/init > ${ALX_UNPRIV_HOME}/.fluxbox/init |
592 | niro | 275 | |
593 | niro | 319 | # fluxbox autostart |
594 | niro | 2039 | cat ${ALX_SKELETONS}/fluxbox/apps > ${ALX_UNPRIV_HOME}/.fluxbox/apps |
595 | niro | 319 | |
596 | niro | 275 | # fluxbox menu header |
597 | niro | 2039 | cat ${ALX_SKELETONS}/fluxbox/menu.header > ${ALX_UNPRIV_HOME}/.fluxbox/menu |
598 | niro | 275 | |
599 | niro | 297 | # now fix it with proper messages :P |
600 | local ver="$(< /etc/mageversion)" | ||
601 | niro | 2039 | sed -i "s:@CHANGEME@:alx-${ver} #${ALX_SERIAL}:g" ${ALX_UNPRIV_HOME}/.fluxbox/menu |
602 | niro | 297 | |
603 | niro | 275 | # add a newline (maybe there is no crlf in the header) |
604 | echo >> ${ALX_UNPRIV_HOME}/.fluxbox/menu | ||
605 | |||
606 | # fluxbox menu footer | ||
607 | niro | 2039 | cat ${ALX_SKELETONS}/fluxbox/menu.footer >> ${ALX_UNPRIV_HOME}/.fluxbox/menu |
608 | niro | 275 | |
609 | # add a newline (maybe there is no crlf in the footer) | ||
610 | echo >> ${ALX_UNPRIV_HOME}/.fluxbox/menu | ||
611 | |||
612 | niro | 313 | |
613 | # setup some standart icons (sysinfo.lnk) | ||
614 | # basic config | ||
615 | cat ${ALX_SKELETONS}/xtdesktop/xtdeskrc > ${ALX_UNPRIV_HOME}/.xtdeskrc | ||
616 | |||
617 | # clean desktop icon location | ||
618 | [ -d ${ALX_UNPRIV_HOME}/.xtdesktop ] && rm -rf ${ALX_UNPRIV_HOME}/.xtdesktop | ||
619 | install -d ${ALX_UNPRIV_HOME}/.xtdesktop | ||
620 | |||
621 | # last but not least gen a icon with some sys informations | ||
622 | local sysinfo | ||
623 | local osversion | ||
624 | local xres | ||
625 | local yres | ||
626 | |||
627 | osversion="$(< /etc/mageversion)" | ||
628 | sysinfo="Hostname: ${ALX_DEFAULT_HOSTNAME} Serial: #${ALX_SERIAL} OS: alx-${osversion} Kernel: $(uname -r)" | ||
629 | |||
630 | # at first boot we got always a resolution of 1024x768-16@60 | ||
631 | # middle of the screen | ||
632 | # (no txt - length required, xtdesk manage that itself) | ||
633 | xres="$((1024 / 2))" | ||
634 | # default y pos (full yres -22 !) | ||
635 | yres="$((768 - 22 ))" | ||
636 | |||
637 | generate_icon \ | ||
638 | --name "${sysinfo}" \ | ||
639 | --command "exit 0" \ | ||
640 | --icon "${ALX_SESSIONS_ICONS}/sysinfo.png" \ | ||
641 | --dest "${ALX_UNPRIV_HOME}/.xtdesktop/sysinfo.lnk" \ | ||
642 | --xres "${xres}" \ | ||
643 | --yres "${yres}" \ | ||
644 | --icon-width "1" \ | ||
645 | --icon-height "1" | ||
646 | |||
647 | niro | 368 | # create a xinitrc |
648 | echo "exec startfluxbox" > ${ALX_UNPRIV_HOME}/.xinitrc | ||
649 | |||
650 | niro | 282 | # set correct permissions |
651 | chown ${ALX_UNPRIV_USER}:${ALX_UNPRIV_GROUP} ${ALX_UNPRIV_HOME} | ||
652 | chown ${ALX_UNPRIV_USER}:${ALX_UNPRIV_GROUP} ${ALX_UNPRIV_HOME}/.fluxbox | ||
653 | chmod 0755 ${ALX_UNPRIV_HOME}/.fluxbox | ||
654 | niro | 348 | chmod 0755 ${ALX_UNPRIV_HOME}/.xtdesktop |
655 | chmod 0644 ${ALX_UNPRIV_HOME}/.xtdeskrc | ||
656 | niro | 368 | chmod 0644 ${ALX_UNPRIV_HOME}/.xinitrc |
657 | niro | 221 | } |
658 | |||
659 | niro | 282 | # start|stop |
660 | niro | 337 | preliminary_network() |
661 | { | ||
662 | niro | 221 | local module |
663 | niro | 226 | |
664 | if [ -f /etc/alxconfig-ng/state/configured ] | ||
665 | niro | 221 | then |
666 | niro | 337 | # compat for old clients |
667 | if [ -f ${SETTINGSPATH}/modules ] | ||
668 | then | ||
669 | # get module name | ||
670 | module=$(cat ${SETTINGSPATH}/modules) | ||
671 | modprobe ${module} | ||
672 | fi | ||
673 | niro | 1976 | |
674 | niro | 221 | else |
675 | niro | 2009 | # vars used by hwsetup |
676 | niro | 221 | local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME |
677 | local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER | ||
678 | niro | 226 | |
679 | niro | 2009 | # get setting from hwsetup |
680 | niro | 2008 | source /etc/conf.d/hwsetup/knoppix |
681 | niro | 221 | modprobe ${NETCARD_DRIVER} |
682 | fi | ||
683 | niro | 226 | |
684 | niro | 221 | case $1 in |
685 | start) | ||
686 | # keeping like always safe: | ||
687 | # no network should be startet here, | ||
688 | # so we can delete all pid files if one exists | ||
689 | niro | 2156 | if [[ ! -z $(pidof $(basename ${ALX_DHCP_PROG})) ]] |
690 | niro | 221 | then |
691 | niro | 2141 | rc_mecho "Forcing network down" |
692 | niro | 2156 | killall $(basename ${ALX_DHCP_PROG}) &> /dev/null |
693 | niro | 221 | sleep 1 |
694 | fi | ||
695 | niro | 2039 | [[ ${ALX_CONFD_NETWORKING} = true ]] && ${rc_base}/init.d/network stop |
696 | niro | 226 | |
697 | niro | 2141 | rc_mecho "Starting preliminary networking ... " |
698 | niro | 226 | |
699 | niro | 337 | # start network configured from /etc/conf.d |
700 | if [[ ${ALX_CONFD_NETWORKING} = true ]] | ||
701 | then | ||
702 | ${rc_base}/init.d/network start | ||
703 | else | ||
704 | niro | 2141 | rc_print "Starting default dhcp based networking ... " |
705 | niro | 2156 | ${ALX_DHCP_PROG} ${ALX_DHCP_START} &> /dev/null |
706 | niro | 337 | evaluate_retval |
707 | fi | ||
708 | niro | 221 | ;; |
709 | niro | 226 | |
710 | niro | 221 | stop) |
711 | niro | 2141 | rc_mecho "Stopping preliminary networking ... " |
712 | niro | 337 | if [[ ${ALX_CONFD_NETWORKING} = true ]] |
713 | then | ||
714 | ${rc_base}/init.d/network stop | ||
715 | else | ||
716 | niro | 2141 | rc_print "Stopping default dhcp based networking ... " |
717 | niro | 2156 | ifconfig ${ALX_IFACE} down |
718 | niro | 337 | fi |
719 | niro | 2156 | if [[ ! -z $(pidof $(basename ${ALX_DHCP_PROG})) ]] |
720 | niro | 221 | then |
721 | niro | 2156 | killall $(basename ${ALX_DHCP_PROG}) &> /dev/null |
722 | niro | 1596 | sleep 1 |
723 | niro | 221 | fi |
724 | evaluate_retval | ||
725 | ;; | ||
726 | niro | 226 | |
727 | niro | 221 | *) |
728 | echo "Usage: preliminary_network {start|stop}" | ||
729 | ;; | ||
730 | esac | ||
731 | } | ||
732 | |||
733 | niro | 337 | reset_system_settings() |
734 | { | ||
735 | # force load of de kbdkeys | ||
736 | loadkeys -q de | ||
737 | niro | 2141 | rc_echo |
738 | rc_echo -en ${COLRED} | ||
739 | rc_echo -n "*** Warning: you are about to reset *all* local settings on this system!" | ||
740 | rc_echo -e ${COLDEFAULT} | ||
741 | rc_echo "*** Do you really want to continue ?" | ||
742 | rc_echo -n "*** Enter 'yes' to continue, anything else to abort: " | ||
743 | niro | 337 | read kbinsert |
744 | if [[ ${kbinsert} = yes ]] | ||
745 | then | ||
746 | niro | 2141 | rc_echo -en ${COLRED} |
747 | rc_echo -n "*** OK, you really want it ... killing all settings: " | ||
748 | niro | 337 | for i in 3 2 1 now |
749 | do | ||
750 | niro | 2141 | rc_echo -n " ${i}" |
751 | niro | 337 | sleep 1 |
752 | done | ||
753 | niro | 2141 | rc_echo -e ${COLDEFAULT} |
754 | niro | 337 | |
755 | ## reset all settings: | ||
756 | rm -rf ${SETTINGSPATH}/* | ||
757 | rm -f /etc/alxconfig-ng/serial | ||
758 | rm -rf /etc/alxconfig-ng/state | ||
759 | |||
760 | niro | 357 | # clear all printers & net-shares |
761 | niro | 2122 | :> /etc/printcap |
762 | niro | 357 | |
763 | niro | 2122 | # remove lprng |
764 | rc-config del lprng &> /dev/null | ||
765 | niro | 357 | |
766 | # remove all user settings | ||
767 | [ -d ${ALX_UNPRIV_HOME} ] && rm -rf ${ALX_UNPRIV_HOME} | ||
768 | |||
769 | # remove all ica-sessions | ||
770 | niro | 359 | find ${ALX_ICA_SESSIONS} -type f -name '*.ica' | xargs rm |
771 | niro | 357 | |
772 | # remove all old nics and modules configs | ||
773 | find /etc/conf.d -type f -name 'net.*' | xargs rm | ||
774 | niro | 2122 | find /etc/modprobe.d -type f -name 'net.*' | xargs rm |
775 | niro | 357 | |
776 | # restore default networking | ||
777 | cat ${ALX_SKELETONS}/net/net.eth0 > /etc/conf.d/net.eth0 | ||
778 | |||
779 | niro | 2141 | rc_echo "I am done now, press [Enter] to reboot system ..." |
780 | niro | 348 | else |
781 | niro | 2141 | rc_echo "Aborted, press [Enter] to reboot system ..." |
782 | niro | 337 | fi |
783 | niro | 348 | read |
784 | reboot | ||
785 | niro | 337 | } |
786 | |||
787 | onboot_interface_list() | ||
788 | { | ||
789 | local file | ||
790 | local devices | ||
791 | local iface | ||
792 | |||
793 | # get list of all devices | ||
794 | for file in $@ | ||
795 | do | ||
796 | if [[ $(read_value ONBOOT ${file}) = yes ]] | ||
797 | then | ||
798 | iface="$(basename ${file} | sed s/net.//)" | ||
799 | # exclude backup files | ||
800 | case "${iface}" in | ||
801 | *~) ;; | ||
802 | *) devices="${devices} $(basename ${file} | sed s/net.//)" ;; | ||
803 | esac | ||
804 | fi | ||
805 | done | ||
806 | |||
807 | echo "${devices}" | ||
808 | } | ||
809 | |||
810 | niro | 348 | # read values from net.* files |
811 | niro | 337 | read_value() |
812 | { | ||
813 | local var="$1" | ||
814 | local file="$2" | ||
815 | local value | ||
816 | |||
817 | # local all possible vars | ||
818 | # global | ||
819 | local ONBOOT | ||
820 | local NETWORKING | ||
821 | |||
822 | # static | ||
823 | local IP | ||
824 | local NETMASK | ||
825 | local BROADCAST | ||
826 | local NETWORKING | ||
827 | local FORCE_MAC_TO | ||
828 | |||
829 | # dhcp | ||
830 | local DHCP_PROG | ||
831 | local DHCP_START | ||
832 | local DHCP_STOP | ||
833 | |||
834 | # default gw | ||
835 | local GATEWAY | ||
836 | local GATEWAY_IF | ||
837 | |||
838 | # wireless extensions | ||
839 | local WIRELESS_AP | ||
840 | local WIRELESS_AUTH_MODE | ||
841 | local WIRELESS_BITRATE | ||
842 | local WIRELESS_CHANNEL | ||
843 | local WIRELESS_DEFAULT_KEY | ||
844 | local WIRELESS_ESSID | ||
845 | local WIRELESS_FREQUENCY | ||
846 | local WIRELESS_KEY | ||
847 | local WIRELESS_KEY_ASCII | ||
848 | local WIRELESS_KEY_0 | ||
849 | local WIRELESS_KEY_1 | ||
850 | local WIRELESS_KEY_2 | ||
851 | local WIRELESS_KEY_3 | ||
852 | local WIRELESS_KEY_LENGTH | ||
853 | local WIRELESS_MODE | ||
854 | local WIRELESS_NICK | ||
855 | local WIRELESS_NWID | ||
856 | local WIRELESS_POWER | ||
857 | |||
858 | source ${file} | ||
859 | eval value=\$$(echo ${var}) | ||
860 | echo "${value}" | ||
861 | } | ||
862 | |||
863 | niro | 221 | case $1 in |
864 | start) | ||
865 | niro | 337 | # check for global overrides |
866 | [ -f ${SETTINGSPATH}/confd-networking ] && ALX_CONFD_NETWORKING=true | ||
867 | [ -f /hardware-auto-detection ] && ALX_FORCED_RECHECK=true | ||
868 | read_cmdline hardware-auto-detection && ALX_FORCED_RECHECK=true | ||
869 | read_cmdline alx-reset-settings && ALX_RESET_SETTINGS=true | ||
870 | |||
871 | # kill all settings if requested | ||
872 | if [[ ${ALX_RESET_SETTINGS} = true ]] | ||
873 | then | ||
874 | reset_system_settings | ||
875 | fi | ||
876 | |||
877 | niro | 282 | # retrieve or validate current serial |
878 | niro | 221 | get_system_serial |
879 | niro | 282 | if [[ ${ALX_HW_DETECT} = true ]] |
880 | niro | 221 | then |
881 | niro | 282 | if [[ ${ALX_FORCED_RECHECK} = true ]] |
882 | then | ||
883 | update_settings_in_db | ||
884 | else | ||
885 | import_settings_to_db | ||
886 | fi | ||
887 | niro | 221 | import_settings_local |
888 | niro | 252 | |
889 | # here we should also exchange the ssh keys | ||
890 | # or the system cannot be rebooted after | ||
891 | # the first start via the alx-webadmin | ||
892 | config_ssh_auth | ||
893 | niro | 221 | fi |
894 | niro | 252 | |
895 | niro | 282 | # now setup system configuration |
896 | # alx_setup_or_whatever_it_will_be_called() | ||
897 | niro | 348 | [[ ${ALX_HW_DETECT} = false ]] && update_system_settings |
898 | niro | 221 | |
899 | niro | 282 | # stop at last the preliminary networking (dhcp) |
900 | niro | 221 | preliminary_network stop |
901 | ;; | ||
902 | niro | 282 | |
903 | niro | 221 | stop) |
904 | niro | 282 | # unset_alx_connected #--> now in alxsetstate-rc6 |
905 | niro | 221 | # ! important !: del systemstate |
906 | niro | 226 | [ -f /etc/alxconfig-ng/state/state ] && rm /etc/alxconfig-ng/state/state |
907 | niro | 221 | sleep 0.1 |
908 | ;; | ||
909 | niro | 2039 | |
910 | niro | 221 | *) |
911 | echo "Usage: $0 {start|stop} ..." | ||
912 | ;; | ||
913 | esac |
Properties
Name | Value |
---|---|
svn:executable | * |