Diff of /alx-src/branches/alxconf-060/init.d/alxsettings

Parent Directory | Revision Log | Patch

	alx-src/trunk/alxconfig-ng/init.d/alxsettings revision 221 by niro, Tue Mar 8 20:49:14 2005 UTC	alx-src/branches/alxconf_20060908/init.d/alxsettings revision 1616 by niro, Mon Dec 6 09:18:06 2010 UTC
#	Line 11	Line 11
11	#%before:	#%before:
12	#%after:	#%after:
13
14		# $Header: /home/cvsd/alx-cvs/alx-src/alxconfig-ng/init.d/alxsettings,v 1.27 2005-10-11 12:10:15 niro Exp $
15
16	# checks first if the client was already configured and if it has an valid serial	# checks first if the client was already configured and if it has an valid serial
17	# if not it runs the autoconfiguration script	# if not it runs the autoconfiguration script
18	# these settings will be used for client setup	# these settings will be used for client setup
#	Line 19	Line 21
21	# if no changes are at server side they will be kept, if yes the get updated.	# if no changes are at server side they will be kept, if yes the get updated.
22	# the server settings has higher priority.	# the server settings has higher priority.
23
	#                       +-----+
	#                       |start|
	#                       +-----+
	#                          |
	#                          |
	#              start_preliminary_network
	#                          |
	#                          |       n
	#                  serial_check ------->  get_new_serial
	#                          |                      |
	#                         y|                      |
	#                          |           n          |
	#                check_is_configured ---->  run_hw_detection
	#                          |                      |
	#                         y|                      |
	#            n             |                      |
	#        +--------cfg_equal_to_db          import_settings_to_db
	#        |                 |                      |
	#   update_from_db        y|                      |
	#        |                 |                      |
	#   set_is_configured      |                  set_is_configured
	#        +-----------------|                      |
	#                          +----------------------+
	#                          |
	#                          |
	#               stop_preliminary_network
	#                          |
	#                          |
	#                       +----+
	#                       |done|
	#                       +----+
	#                          |
	#                          |
	#                 normal_system_bootup
	#                          |
	#                          .
	#                          .
	#                          .
	#
	#
	#
24	source /etc/sysconfig/rc	source /etc/sysconfig/rc
25	source $rc_functions	source $rc_functions
26
27	#mysql settings	# mysql settings
28	source /etc/alx-config/config.rc	source /etc/alxconfig-ng/config.rc
29	source /opt/alx-config/functions/mysqlfunctions
30	source /opt/alx-config/functions/alx-mysql-functions	# helper functions
31		source /usr/lib/alxconfig-ng/functions/mysqlfunctions
32		source /usr/lib/alxconfig-ng/functions/serial_functions
33		source /usr/lib/alxconfig-ng/functions/config_modules
34		source /usr/lib/alxconfig-ng/functions/config_network
35		source /usr/lib/alxconfig-ng/functions/config_printers
36		source /usr/lib/alxconfig-ng/functions/config_sessions
37		source /usr/lib/alxconfig-ng/functions/config_x11
38		source /usr/lib/alxconfig-ng/functions/config_auth
39		source /usr/lib/alxconfig-ng/functions/config_ssh_auth
40		source /usr/lib/alxconfig-ng/functions/config_versions
41
42	#check if mysql is available	# check if mysql is available
43	[ -x /usr/bin/mysql ] && MYSQL_ALX=true	[ -x /usr/bin/mysql ] && MYSQL_ALX=true
44
45	#other needed vars	# other needed vars
46	ALX_HW_DETECT=false	ALX_HW_DETECT=false
47	ALX_NETWORK_SETUP=false	ALX_FORCED_RECHECK=false
48	ALX_XSERVER_SETUP=false	ALX_RESET_SETTINGS=false
49	ALX_SESSION_SETUP=false	ALX_CONFD_NETWORKING=false
	ALX_PRINTER_SETUP=false
50
51	#unset vars which may kill us	# unset vars which may kill us
52	unset ALX_SERIAL ALX_STATE	unset ALX_SERIAL ALX_STATE
53
54
55	#setup needed directories	# setup needed directories
56	[ ! -d /etc/alx-config/state ] && install -d /etc/alx-config/state	[ ! -d /etc/alxconfig-ng/state ] && install -d /etc/alxconfig-ng/state
	# still a need to implement this ?
	# #needed to detect usb/livecd boot
	# if [ -e /.bootdev ]
	# then
	# source /.bootdev
	# else
	# echo "Couldn't find /.bootdev. Aborting."
	# exit 1
	# fi
	# still a need to implement this ? --> media-check ?
	settings_import() {
	if [ "${FSTYPE}" == "vfat" ]
	then
	if [ -e /mnt/cdrom/settings/system ]
	then
	echo -e ${COLOREDSTAR}"Importing old alx-settings ..."
	( cp -R /mnt/cdrom/settings/system/* /etc/alx-config/settings/menu &&
	source /etc/alx-config/config.rc &&
	source /opt/alx-config/Configurator/config_functions.sh &&
	setup_xfree > /dev/null 2>&1 &&
	setup_modules > /dev/null 2>&1 &&
	setup_network > /dev/null 2>&1 &&
	#setup_printers > /dev/null 2>&1 &&
	setup_sessions > /dev/null 2>&1 &&
	touch /etc/alx-config/imported )
	evaluate_retval
	fi
	fi
	}
	# this thingy needs an complete rewrite.
	# first get all settings from db server,
	# than check against local system settings,
	# if there are any differences, update the local settings,
	# as the server has a higher priority.
	# Important: write local settings only if they make sense,
	#            to have a fallback in case the server is down!
	#get_settings_from_server(){
	# #some needed arrays
	# #ARRAY_NETWORK #module domain networking netmask dns gateway
	# #SESSION #
	# #GRAFIK  #
	#
	# echo "Importing now old Settings ..."
	#
	# local serial module domain networking netmask dns gateway i x all
	#
	# declare -i i=0
	#
	# #get hostname from database
	# MY_HOSTNAME=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select hostname from cfg_serial where id='${ALX_SERIAL}'")
	#
	# #get network settings from database
	# all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select module,
	# domain,
	# networking,
	# netmask,
	# dns,
	# gateway,
	# broadcast,
	# ip
	# from cfg_network where serial='${ALX_SERIAL}'")
	# #split'em up and put in array
	# for x in ${all}
	# do
	# ARRAY_NETWORK[${i}]=${x}
	# ((i++))
	# done
	# echo " Network:"
	# echo "   MODULE:     ${ARRAY_NETWORK[0]}"
	# echo "   IP:         ${ARRAY_NETWORK[7]}"
	# echo "   HOSTNAME:   ${MY_HOSTNAME}"
	# echo "   DOMAIN:     ${ARRAY_NETWORK[1]}"
	# echo "   NETWORKING: ${ARRAY_NETWORK[2]}"
	# echo "   NETMASK:    ${ARRAY_NETWORK[3]}"
	# echo "   DNS:        ${ARRAY_NETWORK[4]}"
	# echo "   GATEWAY:    ${ARRAY_NETWORK[5]}"
	# echo "   BROADCAST:  ${ARRAY_NETWORK[6]}"
	# echo
	#
	# #get x settings from database
	# local module resolution
	#
	# #reset i
	# declare -i i=0
	# all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select module,
	# resolution
	# from cfg_grafik where serial='${ALX_SERIAL}'")
	# #split'em up and put in array
	# for x in ${all}
	# do
	# ARRAY_GRAFIK[${i}]=${x}
	# ((i++))
	# done
	#
	# echo " VGA:"
	# echo "   MODULE:     ${ARRAY_GRAFIK[0]}"
	# echo "   RESOLUTION: ${ARRAY_GRAFIK[1]}"
	# echo
	#
	# #get ica-sessions from database
	# ARRAY_SESSIONS=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select session from cfg_session where serial='${ALX_SERIAL}'")
	#
	# echo " SESSIONS:"
	# declare -i i=0
	# for x in ${ARRAY_SESSIONS}
	# do
	# ((i++))
	# echo "   SESSION${i}:   ${x}"
	# done
	# echo
	#
	# #now write these settings
	# local SETTINGSPATH
	#
	# #network
	#
	# #settings must be also set on system, so we put this to menu
	# SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	#
	# [ ! -d ${SETTINGSPATH}/modules ] && install -d ${SETTINGSPATH}/modules
	# echo "${ARRAY_NETWORK[0]}" > ${SETTINGSPATH}/modules/modules
	#
	# [ ! -d ${SETTINGSPATH}/network ] && install -d ${SETTINGSPATH}/network
	# echo "${MY_HOSTNAME}" > ${SETTINGSPATH}/network/hostname
	# echo "${ARRAY_NETWORK[1]}" > ${SETTINGSPATH}/network/domain
	# echo "${ARRAY_NETWORK[2]}" > ${SETTINGSPATH}/network/networking
	# [ -n "${ARRAY_NETWORK[3]}" ] && echo "${ARRAY_NETWORK[3]}" > ${SETTINGSPATH}/network/netmask
	# [ -n "${ARRAY_NETWORK[4]}" ] && echo "${ARRAY_NETWORK[4]}" > ${SETTINGSPATH}/network/dns
	# [ -n "${ARRAY_NETWORK[5]}" ] && echo "${ARRAY_NETWORK[5]}" > ${SETTINGSPATH}/network/gateway
	# [ -n "${ARRAY_NETWORK[6]}" ] && echo "${ARRAY_NETWORK[6]}" > ${SETTINGSPATH}/network/broadcast
	# [ -n "${ARRAY_NETWORK[7]}" ] && echo "${ARRAY_NETWORK[7]}" > ${SETTINGSPATH}/network/ip
57
	validate_networking(){
	#source /opt/alx-config/Configurator/config_functions.sh
58
59	local x i all LOCAL_NETWORK DB_NETWORK SETTINGSPATH	# read_cmdline ${item}
60		read_cmdline()
61	#all arrays:	{
62	# ->  hostname modules domain networking ip netmask dns gateway broadcast	local i
63
64	#networking	for i in $(< /proc/cmdline)
	#get settings from local system
	SETTINGSPATH=${SETTINGS_TEMPLATE}/system
	declare -i i=0
	for x in network/hostname \
	modules/modules \
	network/domain \
	network/networking \
	network/ip \
	network/netmask \
	network/dns \
	network/gateway \
	network/broadcast
65	do	do
66	if [ -f ${SETTINGSPATH}/${x} ]	[[ ${i} = $1 ]] && return 0
	then
	#file exist, then use content
	LOCAL_NETWORK[${i}]="$(< ${SETTINGSPATH}/${x})"
	else
	LOCAL_NETWORK[${i}]=""
	fi
	((i++))
67	done	done
	#get settings from database
	# DB_NETWORK[0]=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select hostname from cfg_network where serial='${ALX_SERIAL}'")
	all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select hostname,
	module,
	domain,
	networking,
	ip,
	netmask,
	dns,
	gateway,
	broadcast
	from cfg_network where serial='${ALX_SERIAL}'")
	#split'em up and put in an array
	declare -i i=0
	for x in ${all}
	do
	DB_NETWORK[${i}]=${x}
	((i++))
	done
	#needed by the small hotfix
	local FIX_ME
	FIX_ME="${DB_NETWORK[2]}"
	#now compare this stuff if they are equal
	for ((i=0; i < 9; i++))
	do
	if [ "${DB_NETWORK[${i}]}" = "${LOCAL_NETWORK[${i}]}" ]
	then
	echo "${i}: ${DB_NETWORK[${i}]} == ${LOCAL_NETWORK[${i}]}"
	#delete equal stuff from DB_NETWORK
	DB_NETWORK[${i}]="*NULL*"
	else
	echo "${i}: ${DB_NETWORK[${i}]} != ${LOCAL_NETWORK[${i}]}"
	fi
	done
	#update configs
	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	declare -i i=0
	for x in network/hostname \
	modules/modules \
	network/domain \
	network/networking \
	network/ip \
	network/netmask \
	network/dns \
	network/gateway \
	network/broadcast
	do
	#update only staff wich wasn't overwritten
	if [ "${DB_NETWORK[${i}]}" != "*NULL*" ]
	then
	#create directory if not exist
	if [ ! -d $(dirname ${SETTINGSPATH}/${x}) ]
	then
	install -d $(dirname ${SETTINGSPATH}/${x})
	fi
	echo "${DB_NETWORK[${i}]}" > ${SETTINGSPATH}/${x}
	# theses fucking config functions:
	# network gets only updated,
	# if ${SETTINGS_TEMPLATE}/menu/network/networking exist
	# so we force an update here
	if [ ! -f ${SETTINGSPATH}/network/networking ]
	then
	[ ! -d ${SETTINGSPATH}/network ] && install -d ${SETTINGSPATH}/network
	echo "${FIX_ME}" > ${SETTINGSPATH}/network/networking
	fi
68
69	#set update flag	return 1
	ALX_NETWORK_SETUP=true
	fi
	((i++))
	done
70	}	}
71
72		update_system_settings()
73		{
74		echo -e ${COLMAGENTA}"Checking system setup ..."${COLDEFAULT}
75
76		# get the modules settings
77		# ! is the first thing that must be configured !
78		config_modules
79
80	validate_xserver(){	# imports network settings from db
81	#source /opt/alx-config/Configurator/config_functions.sh	config_networking
	local x i all LOCAL_XSERVER DB_XSERVER SETTINGSPATH
	#all arrays:
	# ->  xmodule resolution depth mouse monvendor monmodel hsync vref
82
83	#xserver	# imports x11 settings from db
84	#get settings from local system	config_x11
	#vga
	SETTINGSPATH=${SETTINGS_TEMPLATE}/system
	declare -i i=0
	for x in vga/vga \
	vga/vgares \
	vga/vgadepth
	do
	if [ -f ${SETTINGSPATH}/${x} ]
	then
	#file exist, then use content
	LOCAL_XSERVER[${i}]="$(< ${SETTINGSPATH}/${x})"
	else
	LOCAL_XSERVER[${i}]=""
	fi
	((i++))
	done
	#mouse
	if [ -f ${SETTINGSPATH}/mouse/mouse ]
	then
	#file exist, then use content
	LOCAL_XSERVER[3]="$(< ${SETTINGSPATH}/mouse/mouse)"
	else
	LOCAL_XSERVER[3]=""
	fi
	#monitor
	local myvendor mymodel hsync vref
	if [ -f ${SETTINGSPATH}/monitor/monitor ]
	then
	source ${SETTINGSPATH}/monitor/monitor
	declare -i i=4
	for x in "${myvendor}" \
	"${mymodel}" \
	"${hsync}" \
	"${vref}"
	do
	LOCAL_XSERVER[${i}]="${x}"
	((i++))
	done
	else
	LOCAL_XSERVER[4]=""
	LOCAL_XSERVER[5]=""
	LOCAL_XSERVER[6]=""
	LOCAL_XSERVER[7]=""
	fi
	#get settings from database
	all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select module,
	resolution,
	depth
	from cfg_graphic where serial='${ALX_SERIAL}'")
	#split'em up and put in an array
	declare -i i=0
	for x in ${all}
	do
	DB_XSERVER[${i}]=${x}
	((i++))
	done
	# read mouse
	DB_XSERVER[3]=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select mouse from cfg_input where serial='${ALX_SERIAL}'")
	#monitors
	# all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select vendor,
	# model,
	# hsync,
	# vrefresh
	# from cfg_monitor where serial='${ALX_SERIAL}'")
	all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select vendor,
	model,
	hsync,
	vrefresh
	from list_monitors
	inner join cfg_graphic
	on cfg_graphic.monitorid=list_monitors.id;")
	#split'em up and put in an array
	declare -i i=4
	for x in ${all}
	do
	DB_XSERVER[${i}]=${x}
	((i++))
	done
	# #now compare this stuff if they are equal
	# for ((i=0; i < 8; i++))
	# do
	# if [ "${DB_XSERVER[${i}]}" = "${LOCAL_XSERVER[${i}]}" ]
	# then
	# echo "${i}: ${DB_XSERVER[${i}]} == ${LOCAL_XSERVER[${i}]}"
	#
	# #delete equal stuff from DB_NETWORK
	# DB_XSERVER[${i}]="*NULL*"
	#
	# else
	# echo "${i}: ${DB_XSERVER[${i}]} != ${LOCAL_XSERVER[${i}]}"
	# fi
	# done
	#
	#
	# #update configs
	# SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	# #xserver general
	# declare -i i=0
	# for x in vga/vga \
	# vga/vgares \
	# vga/vgadepth \
	# mouse/mouse
	# do
	# #update only staff wich wasn't overwritten
	# if [ "${DB_XSERVER[${i}]}" != "*NULL*" ]
	# then
	# #create directory if not exist
	# if [ ! -d $(dirname ${SETTINGSPATH}/${x}) ]
	# then
	# install -d $(dirname ${SETTINGSPATH}/${x})
	# fi
	# echo "${DB_XSERVER[${i}]}" > ${SETTINGSPATH}/${x}
	# #set update flag
	# ALX_XSERVER_SETUP=true
	# fi
	# ((i++))
	# done
	#
	# #xserver monitors
	# if [ "${DB_XSERVER[4]}" != "*NULL*" \
	# -o "${DB_XSERVER[5]}" != "*NULL*" \
	# -o "${DB_XSERVER[6]}" != "*NULL*" \
	# -o "${DB_XSERVER[7]}" != "*NULL*" ]
	# then
	# if [ ! -d ${SETTINGSPATH}/monitor ]
	# then
	# install -d ${SETTINGSPATH}/monitor
	# fi
	# echo "myvendor=\"${DB_XSERVER[4]}\"" > ${SETTINGSPATH}/monitor/monitor
	# echo "mymodel=\"${DB_XSERVER[5]}\"" >> ${SETTINGSPATH}/monitor/monitor
	# echo "hsync=\"${DB_XSERVER[6]}\"" >> ${SETTINGSPATH}/monitor/monitor
	# echo "vref=\"${DB_XSERVER[7]}\"" >> ${SETTINGSPATH}/monitor/monitor
	#
	# #set update flag
	# ALX_XSERVER_SETUP=true
	# fi
	# - damn fucking setup_xfree routine need to rewrite this fucking stuff -
	# setup_xfree will only run
	# if ${SETTINGS_TEMPLATE}/menu/vga/vga exist
	# so we must *always* update *all* settings if something has changed
85
86	#now compare this stuff if they are equal	# imports session settings from db
87	for ((i=0; i < 8; i++))	config_sessions
	do
	if [ "${DB_XSERVER[${i}]}" = "${LOCAL_XSERVER[${i}]}" ]
	then
	echo "${i}: ${DB_XSERVER[${i}]} == ${LOCAL_XSERVER[${i}]}"
	#delete equal stuff from DB_NETWORK
	#DB_XSERVER[${i}]="*NULL*"
	else
	echo "${i}: ${DB_XSERVER[${i}]} != ${LOCAL_XSERVER[${i}]}"
	fi
	done
88
89	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu	# imports printer settings from db
90	if [ "${DB_XSERVER[0]}" != "*NULL*" \	config_printing
	-o "${DB_XSERVER[1]}" != "*NULL*" \
	-o "${DB_XSERVER[2]}" != "*NULL*" \
	-o "${DB_XSERVER[3]}" != "*NULL*" \
	-o "${DB_XSERVER[4]}" != "*NULL*" \
	-o "${DB_XSERVER[5]}" != "*NULL*" \
	-o "${DB_XSERVER[6]}" != "*NULL*" \
	-o "${DB_XSERVER[7]}" != "*NULL*" ]
	then
	[ ! -d ${SETTINGSPATH}/vga ] && install -d ${SETTINGSPATH}/vga
	[ ! -d ${SETTINGSPATH}/mouse ] && install -d ${SETTINGSPATH}/mouse
	[ ! -d ${SETTINGSPATH}/monitor ] && install -d ${SETTINGSPATH}/monitor
	echo "${DB_XSERVER[0]}" > ${SETTINGSPATH}/vga/vga
	echo "${DB_XSERVER[1]}" > ${SETTINGSPATH}/vga/vgares
	echo "${DB_XSERVER[2]}" > ${SETTINGSPATH}/vga/vgadepth
	echo "${DB_XSERVER[3]}" > ${SETTINGSPATH}/mouse/mouse
	echo "myvendor=\"${DB_XSERVER[4]}\"" > ${SETTINGSPATH}/monitor/monitor
	echo "mymodel=\"${DB_XSERVER[5]}\"" >> ${SETTINGSPATH}/monitor/monitor
	echo "hsync=\"${DB_XSERVER[6]}\"" >> ${SETTINGSPATH}/monitor/monitor
	echo "vref=\"${DB_XSERVER[7]}\"" >> ${SETTINGSPATH}/monitor/monitor
	#set update flag
	ALX_XSERVER_SETUP=true
	fi
	}
91
92		# imports auth settings from db
93		config_auth
94
95	validate_sessions(){	# exchange ssh rsa keys
96	#source /opt/alx-config/Configurator/config_functions.sh	HOME=/root config_ssh_auth
97
98	local x i all LOCAL_SESSIONS DB_SESSIONS SETTINGSPATH count	# import version info
99		config_version
	#all arrays:
	# ->  session1 session2 ... sessionN
	#no LOCAL_SESSIONS here, needs bubblesort
	#get settings from database
	all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select session from cfg_sessions where serial='${ALX_SERIAL}'")
	#split'em up and put in an array (only if $all not zero)
	declare -i i=0
	if [ -n "${all}" ]
	then
	for x in ${all}
	do
	DB_SESSIONS[${i}]=${x}
	((i++))
	done
	count=${i}
	else
	count=0
	fi
	## no compare here, can only done with bubblesort or s.th like that
	# shows only the new sessions
	declare -i i=0
	#count=${#DB_SESSIONS[*]} #---> not working gets always 1, why ?
	echo "Number of new sessions: ${count}"
	for ((i=0; i < count; i++))
	do
	echo "${i} - ${DB_SESSIONS[${i}]}"
	done
	#update local configs
	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	declare -i i=0
	#count=${#DB_SESSIONS[*]}
	if [ ${count} -gt 0 ]
	then
	#create directory if not exist
	[ ! -d ${SETTINGSPATH}/sessions ] && install -d ${SETTINGSPATH}/sessions
	#delete old sessions
	echo -n > ${SETTINGSPATH}/sessions/sessions
	for ((i=0; i < count; i++))
	do
	echo "${DB_SESSIONS[${i}]}" >> ${SETTINGSPATH}/sessions/sessions
	done
	#set update flag
	ALX_SESSION_SETUP=true
	fi
100	}	}
101
102		get_system_serial()
103		{
104		local CUR_IP CUR_MAC CUR_MTIME ALX_IFACE
105
106	validate_printing(){	if [[ ${ALX_CONFD_NETWORKING} = true ]]
	#source /opt/alx-config/Configurator/config_functions.sh
	local x i k all LOCAL_PRINTER DB_PRINTER SETTINGSPATH count
	#all arrays: [2 dimensions !]
	# ->  name1 name2 ... nameN
	# ->  name1 printingport ip share
	#later on, for now -> name1 port1 ip1 share1 name2 ....
	# seperator is 4
	#local PRINTERNAME PRINTING IP SHARE
	# update *always* printers from database;
	# compare with local settings cannot be done yet
	#get settings from database
	all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select printer_name,
	port,
	ip,
	share
	from cfg_printers where serial='${ALX_SERIAL}'")
	#split'em up and put in an array
	declare -i i=0
	declare -i k=0
	if [ -n "${all}" ]
107	then	then
108	for x in ${all}	ALX_IFACE="$(< ${SETTINGSPATH}/confd-networking)"
	do
	((k++))
	DB_PRINTER[${i}]="${DB_PRINTER[${i}]} ${x}"
	if [ ${k} -eq 4 ]
	then
	((i++))
	#reset $k
	declare -i k=0
	fi
	done
	count=${i}
109	else	else
110	count=0	ALX_IFACE="eth0"
	fi
	#echo settings
	echo "Number of new printers: ${count}"
	for ((i=0; i < count; i++))
	do
	echo "${i} printer:"
	for x in ${DB_PRINTER[${i}]}
	do
	echo "    ${x}"
	done
	done
	#import settings (only if counter > 0)
	local prnset
	#delete all printers (*always*)
	if [ -d ${SETTINGS_TEMPLATE}/system/printing ]
	then
	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	[ -d ${SETTINGSPATH}/delete ] && rm -rf ${SETTINGSPATH}/delete
	install -d ${SETTINGSPATH}/delete
	mv -f ${SETTINGS_TEMPLATE}/system/printing/* ${SETTINGSPATH}/delete
	rm -rf ${SETTINGS_TEMPLATE}/system/printing
	#set update flag (*always*)
	ALX_PRINTER_SETUP=true
111	fi	fi
	if [ ${count} -gt 0 ]
	then
	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	[ ! -d ${SETTINGSPATH}/printing ] && install -d ${SETTINGSPATH}/printing
	for ((i=0; i < count; i++))
	do
	declare -i k=0
	for x in ${DB_PRINTER[${i}]}
	do
	prnset[${k}]=${x}
	((k++))
	done
	echo "PRINTERNAME=${prnset[0]}" >  ${SETTINGSPATH}/printing/${prnset[0]}
	echo "PRINTING=${prnset[1]}" >> ${SETTINGSPATH}/printing/${prnset[0]}
	echo "IP=${prnset[2]}" >> ${SETTINGSPATH}/printing/${prnset[0]}
	echo "SHARE=${prnset[3]}" >> ${SETTINGSPATH}/printing/${prnset[0]}
	done
	#set update flag (*always*)
	ALX_PRINTER_SETUP=true
	fi
	}
	update_system_settings(){
	source /opt/alx-config/Configurator/config_functions.sh
112
113	echo -e ${COLMAGENTA}"Checking system setup ..."${COLDEFAULT}	# check if serial file exists
114		if [ -f /etc/alxconfig-ng/serial ] && [[ ${ALX_FORCED_RECHECK} = false ]]
	echo
	echo "network"
	validate_networking
	echo
	echo "xserver"
	validate_xserver
	echo
	echo "sessions"
	validate_sessions
	echo
	#echo "printers"
	#validate_printing
	#echo
	if [ "${ALX_NETWORK_SETUP}" == "true" ]
	then
	echo -e ${COLMAGENTA}"Updating network settings"${COLDEFAULT}
	setup_modules
	setup_network
	fi
	if [ "${ALX_XSERVER_SETUP}" == "true" ]
	then
	echo -e ${COLMAGENTA}"Updating xserver settings"${COLDEFAULT}
	setup_xfree
	fi
	if [ "${ALX_SESSION_SETUP}" == "true" ]
115	then	then
116	echo -e ${COLMAGENTA}"Updating session settings"${COLDEFAULT}	source /etc/alxconfig-ng/serial
	setup_sessions
	fi
	#if [ "${ALX_PRINTER_SETUP}" == "true" ]
	#then
	# echo -e ${COLMAGENTA}"Updating printer settings"${COLDEFAULT}
	# setup_printers
	#fi
	#clean up temp files
	local SETTINGSPATH
	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	#[ -d ${SETTINGSPATH} ] && rm -rf ${SETTINGSPATH}
	}
117
118	get_system_serial(){	# start preliminary networking (dhcp)
119		preliminary_network start
120
121	local CUR_IP CUR_MAC CUR_MTIME	# check if mysql server is reachable
122		# if not abort this script
123		if ! reach_mysql_server
124		then
125		preliminary_network stop
126		exit 1
127		fi
128
129	#check if serial file exists	CUR_IP=$(/sbin/ifconfig ${ALX_IFACE} | sed -n '/addr:/s/ [^r]*..//gp')
130	if [ -f /etc/alx-config/serial ]	CUR_MAC=$(/sbin/ifconfig ${ALX_IFACE} | grep HWaddr | cut -d ' ' -f11)
	then
	source /etc/alx-config/serial
	# if system is already configured, it *has* a hostname.
	# so we take the hostname of this system here
	source /etc/hostname
	#start preliminary networking (dhcp)
	preliminary_network start
	CUR_IP=$(/sbin/ifconfig eth0 | sed -n '/addr:/s/ [^r]*..//gp')
	CUR_MAC=$(/sbin/ifconfig eth0 | grep HWaddr | cut -d ' ' -f11)
131	CUR_MTIME=$(date +%s)	CUR_MTIME=$(date +%s)
132
133	echo -e ${COLOREDSTAR} "Trying to validate my serial ..."	echo -e ${COLOREDSTAR} "Trying to validate my serial ..."
134
135	#nice serial output	# nice serial output
136	$CURS_UP	$CURS_UP
137	$SET_WCOL	$SET_WCOL
138	echo "[ SN: ${ALX_SERIAL} ]"	echo "[ SN: ${ALX_SERIAL} ]"
	# #is this system outdated ?
	# #MY_HOSTNAME=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# # "select hostname from cfg_serial where id='${ALX_SERIAL}'")
	#
	# #we do this now with the date instead of the hostname
	# local MY_ALX_REG_DATE
	# MY_ALX_REG_DATE=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select mtime from client_serial where serial='${ALX_SERIAL}'")
	#
	# #if [ "${MY_HOSTNAME}" == "${HOSTNAME}" ]
	# if [ "${MY_ALX_REG_DATE}" == "${ALX_REG_DATE}" ]
	# then
	# #set ALX_STATE to ok so everybody that everything was ok
	# ALX_STATE=ok
	#
	# evaluate_retval
	# else
	# #print false (works only if this is the first statement here)
	# evaluate_retval
	#
	# #set ALX_STATE to error so everybody sees there was an error
	# ALX_STATE=error
	# fi
139
140	if validate_serial "${ALX_SERIAL}" "${ALX_REG_DATE}" "${CUR_MAC}"	if validate_serial "${ALX_SERIAL}" "${ALX_REG_DATE}" "${CUR_MAC}"
141	then	then
142	ALX_STATE="ok"	ALX_STATE="ok"
143	else	else
144		# abort on non valid serial
145	ALX_STATE="invalid serial"	ALX_STATE="invalid serial"
146		echo "ALX_STATE=\"${ALX_STATE}\"" > /etc/alxconfig-ng/state/state
147		show_invalid_serial_msg
148		exit 1
149	fi	fi
150
151	else	else
152	#run hardware detection	# run hardware detection
153	echo	echo
154	echo -e ${COLMAGENTA}"Preparing system for first boot"${COLDEFAULT}	if [[ ${ALX_FORCED_RECHECK} = true ]]
155		then
156		echo -e ${COLMAGENTA}"Hardware autodetection forced by system-administrator"${COLDEFAULT}
157		else
158		echo -e ${COLMAGENTA}"Preparing system for first boot"${COLDEFAULT}
159		fi
160	ALX_HW_DETECT=true	ALX_HW_DETECT=true
161	/etc/init.d/hwdetect start	/etc/init.d/hwdetect start
162
163	#set hostname to alx_default_hostname	# set hostname to alx_default_hostname
164		# use old hostname if this is a forced re-check
165		[[ ${ALX_FORCED_RECHECK} = true ]] && ALX_DEFAULT_HOSTNAME="$(< /etc/hostname)"
166	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx
167	HOSTNAME="${ALX_DEFAULT_HOSTNAME}"	HOSTNAME="${ALX_DEFAULT_HOSTNAME}"
168
169	#update the hostname on the system for sure	# update the hostname on the system for sure
170	echo "HOSTNAME=${HOSTNAME}" > /etc/hostname	echo "${HOSTNAME}" > /etc/hostname
171
172	#start preliminary networking (dhcp)	# start preliminary networking (dhcp)
173	preliminary_network start	preliminary_network start
174
175		# check if mysql server is reachable
176		# if not abort this script
177		if ! reach_mysql_server
178		then
179		preliminary_network stop
180		exit 1
181		fi
182
183	CUR_IP=$(/sbin/ifconfig eth0 | sed -n '/addr:/s/ [^r]*..//gp')	CUR_IP=$(/sbin/ifconfig eth0 | sed -n '/addr:/s/ [^r]*..//gp')
184	CUR_MAC=$(/sbin/ifconfig eth0 | grep HWaddr | cut -d ' ' -f11)	CUR_MAC=$(/sbin/ifconfig eth0 | grep HWaddr | cut -d ' ' -f11)
185	CUR_MTIME=$(date +%s)	CUR_MTIME=$(date +%s)
186
187		# abort now if this is a forced re-check
188		if [[ ${ALX_FORCED_RECHECK} = true ]]
189		then
190		# but first check the serial
191		source /etc/alxconfig-ng/serial
192
193		echo -e ${COLOREDSTAR} "Trying to validate my serial ..."
194
195		# nice serial output
196		$CURS_UP
197		$SET_WCOL
198		echo "[ SN: ${ALX_SERIAL} ]"
199
200		if validate_serial "${ALX_SERIAL}" "${ALX_REG_DATE}" "${CUR_MAC}"
201		then
202		ALX_STATE="ok"
203		else
204		# abort on non valid serial
205		ALX_STATE="invalid serial"
206		echo "ALX_STATE=${ALX_STATE}" > /etc/alxconfig-ng/state/state
207		show_invalid_serial_msg
208		exit 1
209		fi
210
211		# write current state to temp file
212		echo "ALX_STATE=\"${ALX_STATE}\"" > /etc/alxconfig-ng/state/state
213		[ -f /hardware-auto-detection ] && rm /hardware-auto-detection
214
215		# now export ALX_FORCED_RECHECK=true
216		# that the setting will be updated not inserted !
217		export ALX_FORCED_RECHECK=true
218		return 0
219		fi
220
221	echo -e ${COLOREDSTAR} "Trying to get new serial ..."	echo -e ${COLOREDSTAR} "Trying to get new serial ..."
	#request new serial
	#ALX_REG_DATE="$(date +%F)"
	#we're using the mtime now (better for vaildating the serial)
	mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"insert into client_serials(
	mtime,
	mac
	)
	values(
	'${CUR_MTIME}',
	'${CUR_MAC}'
	);"
	#then validate and retrieve serial
	### warning must be changed that only the LAST ID will be fetched,  ###
	### or you get error if the computer name and date are the same     ###
	### you have more then one serial number than                       ###
	#not 100% working may get more than *one* id
	#ALX_SERIAL=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select id from cfg_serial where datum='${ALX_REG_DATE}' and hostname='${HOSTNAME}'")
	#select highest id only (added max)
	ALX_SERIAL=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select max(serial) from client_serials where mtime='${CUR_MTIME}' and mac='${CUR_MAC}'")
222
223	if [ "${ALX_SERIAL}" != NULL ]	# request a new serial; one command now (cause must be done in the same session)
224		ALX_SERIAL=$(mysqldo "insert into client_serials (mtime, mac) values('${CUR_MTIME}','${CUR_MAC}');
225		select last_insert_id();")
226
227		if [[ ${ALX_SERIAL} != NULL ]]
228	then	then
229	#nice serial output	# nice serial output
230	$CURS_UP	$CURS_UP
231	$SET_WCOL	$SET_WCOL
232	echo "[ SN: ${ALX_SERIAL} ]"	echo "[ SN: ${ALX_SERIAL} ]"
233
234	#set ALX_STATE to ok so everybody that everything was ok	# set ALX_STATE to ok so everybody knows that everything was ok
235	ALX_STATE=ok	ALX_STATE=ok
236
237	echo "ALX_SERIAL=${ALX_SERIAL}" > /etc/alx-config/serial	echo "ALX_SERIAL=\"${ALX_SERIAL}\"" > /etc/alxconfig-ng/serial
238	echo "ALX_REG_DATE=${CUR_MTIME}" >> /etc/alx-config/serial	echo "ALX_REG_DATE=\"${CUR_MTIME}\"" >> /etc/alxconfig-ng/serial
239
240	evaluate_retval	evaluate_retval
241	else	else
242	#print false (works only if this is the first statement here)	# print false (works only if this is the first statement here)
243	evaluate_retval	evaluate_retval
244
245	#set ALX_STATE to error so everybody sees there was an error	# set ALX_STATE to error so everybody sees there was an error
246	ALX_STATE=error	ALX_STATE=error
247
248	#show an error that no new serial was found	# show an error that no new serial was found
249	#nice serial output	# nice serial output
250	$CURS_UP	$CURS_UP
251	$SET_WCOL	$SET_WCOL
252	echo -e "[ SN: ${COLRED}None, 0${COLDEFAULT} ]"	echo -e "[ SN: ${COLRED}None, 0${COLDEFAULT} ]"
253	fi	fi
254	fi	fi
255
256	#write current state to temp file	# write current state to temp file
257	echo "ALX_STATE=${ALX_STATE}" > /etc/alx-config/state/state	echo "ALX_STATE=\"${ALX_STATE}\"" > /etc/alxconfig-ng/state/state
258		echo "ALX_IFACE=\"${ALX_IFACE}\"" >> /etc/alxconfig-ng/state/state
259	}	}
260
261
262	check_is_configured() {	check_is_configured()
263	if [ -f /etc/alx-config/state/configured ]	{
264		if [ -f /etc/alxconfig-ng/state/configured ]
265	then	then
266	export ALX_CONFIGURED=true	export ALX_CONFIGURED=true
267	else	else
#	Line 927  check_is_configured() {	Line 271  check_is_configured() {
271
272
273	# imports current settings to the database resolved by the hardware detection	# imports current settings to the database resolved by the hardware detection
274	import_settings_to_db() {	import_settings_to_db()
275	#note: networking is always 'dhcp' if hw was autodetected	{
276	#note: default_domain/hostname is set in config.rc	# note: networking is always 'dhcp' if hw was autodetected
277		# note: default_domain/hostname is set in config.rc
278	#to be safe, we do some sanity checks
279		# to be safe, we do some sanity checks
280	[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain	[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain
281	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx
282
283	#vars used by hwdetect	# vars used by hwdetect
284	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
285	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
286	local MOUSETYPE XMOUSETYPE FULLNAME DEVICE	local MOUSETYPE XMOUSETYPE FULLNAME DEVICE
287
288	#get setting from hwdetect	# get setting from hwdetect
289	source /etc/sysconfig/hwsetup/knoppix	source /etc/sysconfig/hwsetup/knoppix
290	source /etc/sysconfig/hwsetup/mouse	source /etc/sysconfig/hwsetup/mouse
291
292	echo	echo
293	echo -e ${COLMAGENTA}"Importing detected settings to database"${COLDEFAULT}	echo -e ${COLMAGENTA}"Importing detected settings to database"${COLDEFAULT}
294
295	#network	# network
296	echo -e "      Network settings ..."	echo -e "      Network settings ..."
297	mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \	if [[ ${ALX_CONFD_NETWORKING} = true ]]
298	"insert into cfg_network(	then
299	hostname,	# get settings
300	serial,	#source ${rc_base}/init.d/network &> /dev/null
301	module,	for iface in $(onboot_interface_list ${network_settings}/net.*)
302	domain,	do
303	networking	[[ $(< ${SETTINGSPATH}/confd-networking) != ${iface} ]] && continue
304	)	echo "WARNING: only importing settings for interface [ ${iface} ] !"
305	values(	source ${network_settings}/net.${iface} || exit 1
306	'${ALX_DEFAULT_HOSTNAME}',	NETCARD_DRIVER="$(cat /etc/modules.d/net.${iface} | cut -d' ' -f3)"
307	'${ALX_SERIAL}',
308	'${NETCARD_DRIVER}',	mysqldo "insert into cfg_network(
309	'${ALX_DEFAULT_DOMAIN}',	hostname,
310	'dhcp'	serial,
311	);"	module,
312		domain,
313		networking,
314		netmask,
315		dns,
316		gateway,
317		broadcast,
318		ip,
319		forcemacto,
320		wireless_bitrate,
321		wireless_channel,
322		wireless_essid,
323		wireless_frequency,
324		wireless_mode,
325		wireless_nick,
326		wireless_auth_mode,
327		wireless_key_length,
328		wireless_key,
329		wireless_key_ascii
330		)
331		values(
332		'${ALX_DEFAULT_HOSTNAME}',
333		'${ALX_SERIAL}',
334		'${NETCARD_DRIVER}',
335		'${ALX_DEFAULT_DOMAIN}',
336		'${NETWORKING}',
337		'${NETMASK}',
338		'${NAMESERVER}',
339		'${GATEWAY}',
340		'${BROADCAST}',
341		'${IP}',
342		'${FORCE_MAC_TO}',
343		'${WIRELESS_BITRATE}',
344		'${WIRELESS_CHANNEL}',
345		'${WIRELESS_ESSID}',
346		'${WIRELESS_FREQUENCY}',
347		'${WIRELESS_MODE}',
348		'${WIRELESS_NICK}',
349		'${WIRELESS_AUTH_MODE}',
350		'${WIRELESS_KEY_LENGTH}',
351		'${WIRELESS_KEY}',
352		'${WIRELESS_KEY_ASCII}'
353		);"
354
355		# only insert the *FIRST* iface
356		break
357		done
358		else
359		mysqldo "insert into cfg_network(
360		hostname,
361		serial,
362		module,
363		domain,
364		networking
365		)
366		values(
367		'${ALX_DEFAULT_HOSTNAME}',
368		'${ALX_SERIAL}',
369		'${NETCARD_DRIVER}',
370		'${ALX_DEFAULT_DOMAIN}',
371		'dhcp'
372		);"
373		fi
374	evaluate_retval	evaluate_retval
375
376	#xserver	# xserver
377	echo -e "      Graphic settings ..."	echo -e "      Graphic settings ..."
378	#xserver general	# xserver general
379	( mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \	( mysqldo "insert into cfg_graphic(
	"insert into cfg_graphic(
380	serial,	serial,
381	module,	module,
382	resolution,	resolution,
383	depth	depth,
384		refresh_rate
385	)	)
386	values(	values(
387	'${ALX_SERIAL}',	'${ALX_SERIAL}',
388	'${XMODULE}',	'${XMODULE}',
389	'1024x768',	'1024x768',
390	'16'	'16',
391	);";	'60'
392	#xserver monitor	);"; )
393	mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \	evaluate_retval
394	"insert into cfg_monitor(
395		# input
396		echo -e "      Input settings ..."
397		mysqldo "insert into cfg_input(serial,mouse) values('${ALX_SERIAL}','${XMOUSETYPE}');"
398		evaluate_retval
399
400		# auth
401		echo -e "      Authentification settings ..."
402		mysqldo "insert into client_auth(
403	serial,	serial,
404	vendor,	username,
405	model,	shell,
406	hsync,	vnc,
407	vrefresh	samba,
408		station
409	)	)
410	values(	values(
411	'${ALX_SERIAL}',	'${ALX_SERIAL}',
412	'Aamazing',	'${ALX_UNPRIV_USER}',
413	'CM-1528-FS',	'',
414	'28-64',	'',
415	'47-104'	'',
416	);";	''
417		);"
418	# input	evaluate_retval
419	mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
420	"insert into cfg_input(serial,mouse) values('${ALX_SERIAL}','${XMOUSETYPE}');";)	# exchange ssh rsa keys - the first boot needs this !
421		# or no reboot will work via the webadmin
422		echo -e "      SSH authentification settings ..."
423		HOME=/root config_ssh_auth
424		evaluate_retval
425
426		# autostart
427		echo -e "      Autostart settings ..."
428		mysqldo "insert into cfg_autostart(serial,session) values('${ALX_SERIAL}','');"
429
430		# screensaver
431		echo -e "      Screensaver settings ..."
432		mysqldo "insert into cfg_screensaver(serial,screensaver) values('${ALX_SERIAL}','')"
433
434		# version info
435		local alx_os
436		local alx_utils
437		alx_os="$(< /etc/mageversion)"
438		alx_utils="$(magequery -n alxconfig-ng-alx | sed 's:.*\[\ \(.*\)\ \].*:\1:')"
439		alx_utils="${alx_utils/alxconfig-ng-alx-}"
440		mysqldo "insert into client_version(serial,os,utils) values('${ALX_SERIAL}','${alx_os}','${alx_utils}')"
441
442	evaluate_retval	evaluate_retval
443	}	}
444
445	# imports current settings to the local system resolved by the hardware detection	# imports current settings to the database resolved by the hardware detection
446	import_settings_local(){	update_settings_in_db()
447	#note: networking is always 'dhcp' if hw was autodetected	{
448	#note: default_domain/hostname is set in config.rc	# note: networking is always 'dhcp' if hw was autodetected
449		# note: default_domain/hostname is set in config.rc or exported
450	#to be safe, we do some sanity checks	# note: we updating only hardware settings here !
451
452		# to be safe, we do some sanity checks
453	[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain	[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain
454	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx
455
456	#vars used by hwdetect	# vars used by hwdetect
457	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
458	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
459	local MOUSETYPE XMOUSETYPE FULLNAME DEVICE	local MOUSETYPE XMOUSETYPE FULLNAME DEVICE
460
461		# get setting from hwdetect
	#get setting from hwdetect
462	source /etc/sysconfig/hwsetup/knoppix	source /etc/sysconfig/hwsetup/knoppix
463	source /etc/sysconfig/hwsetup/mouse	source /etc/sysconfig/hwsetup/mouse
464
465	echo	echo
466	echo -e ${COLMAGENTA}"Importing detected settings to local system"${COLDEFAULT}	echo -e ${COLMAGENTA}"Updating detected settings in database"${COLDEFAULT}
467
468		# network
	#allready configured, no update needed so we put it to system
	SETTINGSPATH=${SETTINGS_TEMPLATE}/system
	#network
469	echo -e "      Network settings ..."	echo -e "      Network settings ..."
470		if [[ ${ALX_CONFD_NETWORKING} = true ]]
471		then
472		# get settings
473		#source ${rc_base}/init.d/network &> /dev/null
474		for iface in $(onboot_interface_list ${network_settings}/net.*)
475		do
476		[[ $(< ${SETTINGSPATH}/confd-networking) != ${iface} ]] && continue
477		echo "WARNING: only importing settings for interface [ ${iface} ] !"
478		source ${network_settings}/net.${iface} || exit 1
479		NETCARD_DRIVER="$(cat /etc/modules.d/net.${iface} | cut -d' ' -f3)"
480
481		mysqldo "update cfg_network set
482		hostname='${ALX_DEFAULT_HOSTNAME}',
483		module='${NETCARD_DRIVER}',
484		domain='${ALX_DEFAULT_DOMAIN}',
485		networking='${NETWORKING}',
486		netmask='${NETMASK}',
487		dns='${NAMESERVER}',
488		gateway='${GATEWAY}',
489		broadcast='${BROADCAST}',
490		ip='${IP}',
491		forcemacto='${FORCE_MAC_TO}',
492		wireless_bitrate='${WIRELESS_BITRATE}',
493		wireless_channel='${WIRELESS_CHANNEL}',
494		wireless_essid='${WIRELESS_ESSID}',
495		wireless_frequency='${WIRELESS_FREQUENCY}',
496		wireless_mode='${WIRELESS_MODE}',
497		wireless_nick='${WIRELESS_NICK}',
498		wireless_auth_mode='${WIRELESS_AUTH_MODE}',
499		wireless_key_length='${WIRELESS_KEY_LENGTH}',
500		wireless_key='${WIRELESS_KEY}',
501		wireless_key_ascii='${WIRELESS_KEY_ASCII}'
502		where serial=${ALX_SERIAL};"
503
504	[ ! -d ${SETTINGSPATH}/modules ] && install -d ${SETTINGSPATH}/modules	# only insert the *FIRST* iface
505	echo "${NETCARD_DRIVER}" > ${SETTINGSPATH}/modules/modules	break
506		done
507	[ ! -d ${SETTINGSPATH}/network ] && install -d ${SETTINGSPATH}/network	else
508	( echo "${ALX_DEFAULT_HOSTNAME}" > ${SETTINGSPATH}/network/hostname;	mysqldo "update cfg_network set
509	echo "${ALX_DEFAULT_DOMAIN}" > ${SETTINGSPATH}/network/domain;	hostname='${ALX_DEFAULT_HOSTNAME}',
510	echo "dhcp" > ${SETTINGSPATH}/network/networking )	module='${NETCARD_DRIVER}',
511		domain='${ALX_DEFAULT_DOMAIN}',
512		networking='dhcp'
513		where serial=${ALX_SERIAL};"
514		fi
515	evaluate_retval	evaluate_retval
516
517		# xserver
	#xserver
518	echo -e "      Graphic settings ..."	echo -e "      Graphic settings ..."
519		# xserver general
520	[ ! -d ${SETTINGSPATH}/vga ] && install -d ${SETTINGSPATH}/vga	mysqldo "update cfg_graphic set
521	[ ! -d ${SETTINGSPATH}/mouse ] && install -d ${SETTINGSPATH}/mouse	module='${XMODULE}',
522	[ ! -d ${SETTINGSPATH}/monitor ] && install -d ${SETTINGSPATH}/monitor	resolution='1024x768',
523	( echo "${XMODULE}" > ${SETTINGSPATH}/vga/vga;	depth='16',
524	echo "16" > ${SETTINGSPATH}/vga/vgadepth;	refresh_rate='60'
525	echo "1024x768" > ${SETTINGSPATH}/vga/vgares;	where serial=${ALX_SERIAL};"
	echo "${XMOUSETYPE}" > ${SETTINGSPATH}/mouse/mouse;
	echo "myvendor=\"Aamazing\"" > ${SETTINGSPATH}/monitor/monitor;
	echo "mymodel=\"CM-1528-FS\"" >> ${SETTINGSPATH}/monitor/monitor;
	echo "hsync=\"28-64\"" >> ${SETTINGSPATH}/monitor/monitor;
	echo "vref=\"47-104\"" >> ${SETTINGSPATH}/monitor/monitor;)
526	evaluate_retval	evaluate_retval
527
528	#set system state to 'already configured'	# input
529	touch /etc/alx-config/state/configured	echo -e "      Input settings ..."
530		mysqldo "update cfg_input set mouse='${XMOUSETYPE}' where serial=${ALX_SERIAL};"
531		evaluate_retval
532
533		# version info
534		local alx_os
535		local alx_utils
536		alx_os="$(< /etc/mageversion)"
537		alx_utils="$(magequery -n alxconfig-ng-alx | sed 's:.*\[\ \(.*\)\ \].*:\1:')"
538		alx_utils="${alx_utils/alxconfig-ng-alx-}"
539		mysqldo "update client_version set os='${alx_os}', utils='${alx_utils}' where serial=${ALX_SERIAL};"
540	}	}
541
542	#start|stop	# imports current settings to the local system resolved by the hardware detection
543	preliminary_network(){	# we only need the network settings
544		import_settings_local()
545		{
546		# note: networking is always 'dhcp' if hw was autodetected
547		# note: default_domain/hostname is set in config.rc
548
549		# to be safe, we do some sanity checks
550		[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain
551		[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx
552
553		# vars used by hwdetect
554		local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
555		local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
556		local MOUSETYPE XMOUSETYPE FULLNAME DEVICE
557
558		# get setting from hwdetect
559		source /etc/sysconfig/hwsetup/knoppix
560
561		echo
562		echo -e ${COLMAGENTA}"Importing detected settings to local system"${COLDEFAULT}
563
564		if [[ ${ALX_CONFD_NETWORKING} = false ]]
565		then
566		#[ ! -d ${SETTINGSPATH} ] && install -d ${SETTINGSPATH}
567		#echo "${NETCARD_DRIVER}" > ${SETTINGSPATH}/modules
568
569		# set an device alias for modprobe.conf
570		[ ! -d /etc/modules.d ] && install -d /etc/modules.d
571		echo "alias eth0 ${NETCARD_DRIVER}" > /etc/modules.d/net.eth0
572
573		# regenerate modprobe.conf
574		[ -x $(which modules-update) ] && modules-update || echo "cannot regen modprobe.conf"
575		evaluate_retval
576		fi
577
578		# set system state to 'already configured'
579		touch /etc/alxconfig-ng/state/configured
580
581		# if only an recheck was forced than abort now
582		[[ ${ALX_FORCED_RECHECK} = true ]] && return 0
583
584		# create a fresh fluxbox directory
585		[ -d ${ALX_UNPRIV_HOME}/.fluxbox ] && rm -rf ${ALX_UNPRIV_HOME}/.fluxbox
586		install -d ${ALX_UNPRIV_HOME}/.fluxbox
587
588		# now generate fluxbox config files
589
590		# fluxbox main config
591		cat ${ALX_SKELETONS}/fluxbox/init \
592		> ${ALX_UNPRIV_HOME}/.fluxbox/init
593
594		# fluxbox autostart
595		cat ${ALX_SKELETONS}/fluxbox/apps \
596		> ${ALX_UNPRIV_HOME}/.fluxbox/apps
597
598		# fluxbox menu header
599		cat ${ALX_SKELETONS}/fluxbox/menu.header \
600		> ${ALX_UNPRIV_HOME}/.fluxbox/menu
601
602		# now fix it with proper messages :P
603		local ver="$(< /etc/mageversion)"
604		sed -i "s:@CHANGEME@:alx-${ver}  #${ALX_SERIAL}:g" \
605		${ALX_UNPRIV_HOME}/.fluxbox/menu
606
607		# add a newline (maybe there is no crlf in the header)
608		echo >> ${ALX_UNPRIV_HOME}/.fluxbox/menu
609
610		# fluxbox menu footer
611		cat ${ALX_SKELETONS}/fluxbox/menu.footer \
612		>> ${ALX_UNPRIV_HOME}/.fluxbox/menu
613
614		# add a newline (maybe there is no crlf in the footer)
615		echo >> ${ALX_UNPRIV_HOME}/.fluxbox/menu
616
617
618		# setup some standart icons (sysinfo.lnk)
619		# basic config
620		cat ${ALX_SKELETONS}/xtdesktop/xtdeskrc > ${ALX_UNPRIV_HOME}/.xtdeskrc
621
622		# clean desktop icon location
623		[ -d ${ALX_UNPRIV_HOME}/.xtdesktop ] && rm -rf ${ALX_UNPRIV_HOME}/.xtdesktop
624		install -d ${ALX_UNPRIV_HOME}/.xtdesktop
625
626		# last but not least gen a icon with some sys informations
627		local sysinfo
628		local osversion
629		local xres
630		local yres
631
632		osversion="$(< /etc/mageversion)"
633		sysinfo="Hostname: ${ALX_DEFAULT_HOSTNAME} Serial: #${ALX_SERIAL} OS: alx-${osversion} Kernel: $(uname -r)"
634
635		# at first boot we got always a resolution of 1024x768-16@60
636		# middle of the screen
637		# (no txt - length required, xtdesk manage that itself)
638		xres="$((1024 / 2))"
639		# default y pos (full yres -22 !)
640		yres="$((768 - 22 ))"
641
642		generate_icon \
643		--name "${sysinfo}" \
644		--command "exit 0" \
645		--icon "${ALX_SESSIONS_ICONS}/sysinfo.png" \
646		--dest "${ALX_UNPRIV_HOME}/.xtdesktop/sysinfo.lnk" \
647		--xres "${xres}" \
648		--yres "${yres}" \
649		--icon-width "1" \
650		--icon-height "1"
651
652		# create a xinitrc
653		echo "exec startfluxbox" > ${ALX_UNPRIV_HOME}/.xinitrc
654
655		# set correct permissions
656		chown ${ALX_UNPRIV_USER}:${ALX_UNPRIV_GROUP} ${ALX_UNPRIV_HOME}
657		chown ${ALX_UNPRIV_USER}:${ALX_UNPRIV_GROUP} ${ALX_UNPRIV_HOME}/.fluxbox
658		chmod 0755 ${ALX_UNPRIV_HOME}/.fluxbox
659		chmod 0755 ${ALX_UNPRIV_HOME}/.xtdesktop
660		chmod 0644 ${ALX_UNPRIV_HOME}/.xtdeskrc
661		chmod 0644 ${ALX_UNPRIV_HOME}/.xinitrc
662		}
663
664		# start|stop
665		preliminary_network()
666		{
667	local module	local module
668
669	if [ -f /etc/alx-config/state/configured ]	if [ -f /etc/alxconfig-ng/state/configured ]
670	then	then
671	#get module name	# compat for old clients
672	module=$(cat ${SETTINGS_TEMPLATE}/system/modules/modules)	if [ -f ${SETTINGSPATH}/modules ]
673	modprobe ${module}	then
674		# get module name
675		module=$(cat ${SETTINGSPATH}/modules)
676		modprobe ${module}
677		fi
678	else	else
679	#vars used by hwdetect	# vars used by hwdetect
680	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
681	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
682
683	#get setting from hwdetect	# get setting from hwdetect
684	source /etc/sysconfig/hwsetup/knoppix	source /etc/sysconfig/hwsetup/knoppix
685	modprobe ${NETCARD_DRIVER}	modprobe ${NETCARD_DRIVER}
686	fi	fi
687
688	case $1 in	case $1 in
689	start)	start)
690	# keeping like always safe:	# keeping like always safe:
#	Line 1097  preliminary_network(){	Line 698  preliminary_network(){
698	else	else
699	rm -f /var/run/dhcpcd-eth?.pid	rm -f /var/run/dhcpcd-eth?.pid
700	fi	fi
701		[[ ${ALX_CONFD_NETWORKING} = true ]] && [[ ${RUNLEVEL} != S ]] && \
702	echo -e ${COLMAGENTA}"Starting preliminary network ... "${COLDEFAULT}	${rc_base}/init.d/network stop
703	#dhcpcd &> /dev/null #&& echo "ok" || echo "false"
704		echo -e ${COLMAGENTA}"Starting preliminary networking ... "${COLDEFAULT}
705	# aka_fix ########################################
706	ifconfig eth0 128.20.222.222 netmask 255.255.0.0 up	# start network configured from /etc/conf.d
707	route del default gw 128.20.50.13 &> /dev/null	if [[ ${ALX_CONFD_NETWORKING} = true ]]
708	route add default gw 128.20.50.21 &> /dev/null	then
709	echo "nameserver 128.20.50.21" > /etc/resolv.conf	${rc_base}/init.d/network start
710	##################################################	else
711	evaluate_retval	echo -e ${COLOREDSTAR}"Starting default dhcp based networking ... "${COLDEFAULT}
712		# -t 10 timeout of 10 secs
713		dhcpcd -t 10 &> /dev/null
714		evaluate_retval
715		fi
716	;;	;;
717
718	stop)	stop)
719	echo -e ${COLMAGENTA}"Stopping preliminary network ... "${COLDEFAULT}	echo -e ${COLMAGENTA}"Stopping preliminary networking ... "${COLDEFAULT}
720	ifconfig eth0 down	if [[ ${ALX_CONFD_NETWORKING} = true ]]
721		then
722		${rc_base}/init.d/network stop
723		else
724		echo -e ${COLOREDSTAR}"Stopping default dhcp based networking ... "${COLDEFAULT}
725		ifconfig eth0 down
726		fi
727	if ps -A|grep dhcpcd > /dev/null	if ps -A|grep dhcpcd > /dev/null
728	then	then
	#echo -en ${COLMAGENTA}"Stopping preliminary network ... "${COLDEFAULT}
729	dhcpcd -z  &> /dev/null	dhcpcd -z  &> /dev/null
730		sleep 1
731	fi	fi
732	evaluate_retval	evaluate_retval
733	;;	;;
734
735	*)	*)
736	echo "Usage: preliminary_network {start|stop}"	echo "Usage: preliminary_network {start|stop}"
737	;;	;;
738	esac	esac
739	}	}
740
741		reset_system_settings()
742		{
743		# force load of de kbdkeys
744		loadkeys -q de
745		echo
746		echo -en ${COLRED}
747		echo -n "*** Warning: you are about to reset *all* local settings on this system!"
748		echo -e ${COLDEFAULT}
749		echo "*** Do you really want to continue ?"
750		echo -n "*** Enter 'yes' to continue, anything else to abort: "
751		read kbinsert
752		if [[ ${kbinsert} = yes ]]
753		then
754		echo -en ${COLRED}
755		echo -n "*** OK, you really want it ... killing all settings: "
756		for i in 3 2 1 now
757		do
758		echo -n " ${i}"
759		sleep 1
760		done
761		echo -e ${COLDEFAULT}
762
763		## reset all settings:
764		rm -rf ${SETTINGSPATH}/*
765		rm -f /etc/alxconfig-ng/serial
766		rm -rf /etc/alxconfig-ng/state
767
768		# clear all printers & net-shares
769		:> /etc/cups/printers.conf
770		:> /etc/samba/smb.conf
771
772		# remove inetd, cups & smb from init
773		rc-config del inetd &> /dev/null
774		rc-config del cups &> /dev/null
775		rc-config del samba &> /dev/null
776
777		# remove all user settings
778		[ -d ${ALX_UNPRIV_HOME} ] && rm -rf ${ALX_UNPRIV_HOME}
779
780		# remove all ica-sessions
781		find ${ALX_ICA_SESSIONS} -type f -name '*.ica' | xargs rm
782
783		# remove all old nics and modules configs
784		find /etc/conf.d -type f -name 'net.*' | xargs rm
785		find /etc/modules.d -type f -name 'net.*' | xargs rm
786
787		# restore default networking
788		cat ${ALX_SKELETONS}/net/net.eth0 > /etc/conf.d/net.eth0
789
790		echo "I am done now, press [Enter] to reboot system ..."
791		else
792		echo "Aborted, press [Enter] to reboot system ..."
793		fi
794		read
795		reboot
796		}
797
798		onboot_interface_list()
799		{
800		local file
801		local devices
802		local iface
803
804		# get list of all devices
805		for file in $@
806		do
807		if [[ $(read_value ONBOOT ${file}) = yes ]]
808		then
809		iface="$(basename ${file} | sed s/net.//)"
810		# exclude backup files
811		case "${iface}" in
812		*~) ;;
813		*) devices="${devices} $(basename ${file} | sed s/net.//)" ;;
814		esac
815		fi
816		done
817
818		echo "${devices}"
819		}
820
821		# read values from net.* files
822		read_value()
823		{
824		local var="$1"
825		local file="$2"
826		local value
827
828		# local all possible vars
829		# global
830		local ONBOOT
831		local NETWORKING
832
833		# static
834		local IP
835		local NETMASK
836		local BROADCAST
837		local NETWORKING
838		local FORCE_MAC_TO
839
840		# dhcp
841		local DHCP_PROG
842		local DHCP_START
843		local DHCP_STOP
844
845		# default gw
846		local GATEWAY
847		local GATEWAY_IF
848
849		# wireless extensions
850		local WIRELESS_AP
851		local WIRELESS_AUTH_MODE
852		local WIRELESS_BITRATE
853		local WIRELESS_CHANNEL
854		local WIRELESS_DEFAULT_KEY
855		local WIRELESS_ESSID
856		local WIRELESS_FREQUENCY
857		local WIRELESS_KEY
858		local WIRELESS_KEY_ASCII
859		local WIRELESS_KEY_0
860		local WIRELESS_KEY_1
861		local WIRELESS_KEY_2
862		local WIRELESS_KEY_3
863		local WIRELESS_KEY_LENGTH
864		local WIRELESS_MODE
865		local WIRELESS_NICK
866		local WIRELESS_NWID
867		local WIRELESS_POWER
868
869		source ${file}
870		eval value=\$$(echo ${var})
871		echo "${value}"
872		}
873
874	case $1 in	case $1 in
875	start)	start)
876	#retrieve or validate current serial	# check for global overrides
877		[ -f ${SETTINGSPATH}/confd-networking ] && ALX_CONFD_NETWORKING=true
878		[ -f /hardware-auto-detection ] && ALX_FORCED_RECHECK=true
879		read_cmdline hardware-auto-detection && ALX_FORCED_RECHECK=true
880		read_cmdline alx-reset-settings && ALX_RESET_SETTINGS=true
881
882		# kill all settings if requested
883		if [[ ${ALX_RESET_SETTINGS} = true ]]
884		then
885		reset_system_settings
886		fi
887
888		# retrieve or validate current serial
889	get_system_serial	get_system_serial
890	if [ "${ALX_HW_DETECT}" == "true" ]	if [[ ${ALX_HW_DETECT} = true ]]
891	then	then
892	import_settings_to_db	if [[ ${ALX_FORCED_RECHECK} = true ]]
893		then
894		update_settings_in_db
895		else
896		import_settings_to_db
897		fi
898	import_settings_local	import_settings_local
899
900		# here we should also exchange the ssh keys
901		# or the system cannot be rebooted after
902		# the first start via the alx-webadmin
903		config_ssh_auth
904	fi	fi
	#now setup system configuration
	#alx_setup_or_whatever_it_will_be_called()
	[ "${ALX_HW_DETECT}" == "false" ] && update_system_settings
905
906	#stop at last the preliminary networking (dhcp)	# now setup system configuration
907		# alx_setup_or_whatever_it_will_be_called()
908		[[ ${ALX_HW_DETECT} = false ]] && update_system_settings
909
910		# stop at last the preliminary networking (dhcp)
911	preliminary_network stop	preliminary_network stop
912	;;	;;
913
914	stop)	stop)
915	#unset_alx_connected #--> now in alxsetstate-rc6	# unset_alx_connected #--> now in alxsetstate-rc6
916	# ! important !: del systemstate	# ! important !: del systemstate
917	[ -f /etc/alx-config/state/state ] && rm /etc/alx-config/state/state	[ -f /etc/alxconfig-ng/state/state ] && rm /etc/alxconfig-ng/state/state
918	sleep 0.1	sleep 0.1
919	;;	;;
920	*)	*)
921	echo "Usage: $0 {start|stop} ..."	echo "Usage: $0 {start|stop} ..."
922	;;	;;
923	esac	esac
924

---

Colored Diff Long Colored Diff Full Colored Diff Unidiff Context Diff Side by Side

Legend: Removed from v.221   changed lines   Added in v.1616