Diff of /alx-src/branches/alxconf-060/init.d/alxsettings

Parent Directory | Revision Log | Patch

	alx-src/trunk/alxconfig-ng/init.d/alxsettings revision 221 by niro, Tue Mar 8 20:49:14 2005 UTC	alx-src/branches/alxconf_20060908/init.d/alxsettings revision 1715 by niro, Tue Jan 25 09:36:42 2011 UTC
#	Line 11	Line 11
11	#%before:	#%before:
12	#%after:	#%after:
13
14		# $Header: /home/cvsd/alx-cvs/alx-src/alxconfig-ng/init.d/alxsettings,v 1.27 2005-10-11 12:10:15 niro Exp $
15
16	# checks first if the client was already configured and if it has an valid serial	# checks first if the client was already configured and if it has an valid serial
17	# if not it runs the autoconfiguration script	# if not it runs the autoconfiguration script
18	# these settings will be used for client setup	# these settings will be used for client setup
#	Line 19	Line 21
21	# if no changes are at server side they will be kept, if yes the get updated.	# if no changes are at server side they will be kept, if yes the get updated.
22	# the server settings has higher priority.	# the server settings has higher priority.
23
	#                       +-----+
	#                       |start|
	#                       +-----+
	#                          |
	#                          |
	#              start_preliminary_network
	#                          |
	#                          |       n
	#                  serial_check ------->  get_new_serial
	#                          |                      |
	#                         y|                      |
	#                          |           n          |
	#                check_is_configured ---->  run_hw_detection
	#                          |                      |
	#                         y|                      |
	#            n             |                      |
	#        +--------cfg_equal_to_db          import_settings_to_db
	#        |                 |                      |
	#   update_from_db        y|                      |
	#        |                 |                      |
	#   set_is_configured      |                  set_is_configured
	#        +-----------------|                      |
	#                          +----------------------+
	#                          |
	#                          |
	#               stop_preliminary_network
	#                          |
	#                          |
	#                       +----+
	#                       |done|
	#                       +----+
	#                          |
	#                          |
	#                 normal_system_bootup
	#                          |
	#                          .
	#                          .
	#                          .
	#
	#
	#
24	source /etc/sysconfig/rc	source /etc/sysconfig/rc
25	source $rc_functions	source $rc_functions
26
27	#mysql settings	# mysql settings
28	source /etc/alx-config/config.rc	source /etc/alxconfig-ng/config.rc
29	source /opt/alx-config/functions/mysqlfunctions
30	source /opt/alx-config/functions/alx-mysql-functions	# helper functions
31		source /usr/lib/alxconfig-ng/functions/mysqlfunctions
32		source /usr/lib/alxconfig-ng/functions/serial_functions
33		source /usr/lib/alxconfig-ng/functions/config_modules
34		source /usr/lib/alxconfig-ng/functions/config_network
35		source /usr/lib/alxconfig-ng/functions/config_printers
36		source /usr/lib/alxconfig-ng/functions/config_sessions
37		source /usr/lib/alxconfig-ng/functions/config_x11
38		source /usr/lib/alxconfig-ng/functions/config_auth
39		source /usr/lib/alxconfig-ng/functions/config_ssh_auth
40		source /usr/lib/alxconfig-ng/functions/config_versions
41
42	#check if mysql is available	# check if mysql is available
43	[ -x /usr/bin/mysql ] && MYSQL_ALX=true	[ -x /usr/bin/mysql ] && MYSQL_ALX=true
44
45	#other needed vars	# other needed vars
46	ALX_HW_DETECT=false	ALX_HW_DETECT=false
47	ALX_NETWORK_SETUP=false	ALX_FORCED_RECHECK=false
48	ALX_XSERVER_SETUP=false	ALX_RESET_SETTINGS=false
49	ALX_SESSION_SETUP=false	ALX_CONFD_NETWORKING=false
	ALX_PRINTER_SETUP=false
50
51	#unset vars which may kill us	# unset vars which may kill us
52	unset ALX_SERIAL ALX_STATE	unset ALX_SERIAL ALX_STATE
53
54
55	#setup needed directories	# setup needed directories
56	[ ! -d /etc/alx-config/state ] && install -d /etc/alx-config/state	[ ! -d /etc/alxconfig-ng/state ] && install -d /etc/alxconfig-ng/state
	# still a need to implement this ?
	# #needed to detect usb/livecd boot
	# if [ -e /.bootdev ]
	# then
	# source /.bootdev
	# else
	# echo "Couldn't find /.bootdev. Aborting."
	# exit 1
	# fi
	# still a need to implement this ? --> media-check ?
	settings_import() {
	if [ "${FSTYPE}" == "vfat" ]
	then
	if [ -e /mnt/cdrom/settings/system ]
	then
	echo -e ${COLOREDSTAR}"Importing old alx-settings ..."
	( cp -R /mnt/cdrom/settings/system/* /etc/alx-config/settings/menu &&
	source /etc/alx-config/config.rc &&
	source /opt/alx-config/Configurator/config_functions.sh &&
	setup_xfree > /dev/null 2>&1 &&
	setup_modules > /dev/null 2>&1 &&
	setup_network > /dev/null 2>&1 &&
	#setup_printers > /dev/null 2>&1 &&
	setup_sessions > /dev/null 2>&1 &&
	touch /etc/alx-config/imported )
	evaluate_retval
	fi
	fi
	}
	# this thingy needs an complete rewrite.
	# first get all settings from db server,
	# than check against local system settings,
	# if there are any differences, update the local settings,
	# as the server has a higher priority.
	# Important: write local settings only if they make sense,
	#            to have a fallback in case the server is down!
	#get_settings_from_server(){
	# #some needed arrays
	# #ARRAY_NETWORK #module domain networking netmask dns gateway
	# #SESSION #
	# #GRAFIK  #
	#
	# echo "Importing now old Settings ..."
	#
	# local serial module domain networking netmask dns gateway i x all
	#
	# declare -i i=0
	#
	# #get hostname from database
	# MY_HOSTNAME=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select hostname from cfg_serial where id='${ALX_SERIAL}'")
	#
	# #get network settings from database
	# all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select module,
	# domain,
	# networking,
	# netmask,
	# dns,
	# gateway,
	# broadcast,
	# ip
	# from cfg_network where serial='${ALX_SERIAL}'")
	# #split'em up and put in array
	# for x in ${all}
	# do
	# ARRAY_NETWORK[${i}]=${x}
	# ((i++))
	# done
	# echo " Network:"
	# echo "   MODULE:     ${ARRAY_NETWORK[0]}"
	# echo "   IP:         ${ARRAY_NETWORK[7]}"
	# echo "   HOSTNAME:   ${MY_HOSTNAME}"
	# echo "   DOMAIN:     ${ARRAY_NETWORK[1]}"
	# echo "   NETWORKING: ${ARRAY_NETWORK[2]}"
	# echo "   NETMASK:    ${ARRAY_NETWORK[3]}"
	# echo "   DNS:        ${ARRAY_NETWORK[4]}"
	# echo "   GATEWAY:    ${ARRAY_NETWORK[5]}"
	# echo "   BROADCAST:  ${ARRAY_NETWORK[6]}"
	# echo
	#
	# #get x settings from database
	# local module resolution
	#
	# #reset i
	# declare -i i=0
	# all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select module,
	# resolution
	# from cfg_grafik where serial='${ALX_SERIAL}'")
	# #split'em up and put in array
	# for x in ${all}
	# do
	# ARRAY_GRAFIK[${i}]=${x}
	# ((i++))
	# done
	#
	# echo " VGA:"
	# echo "   MODULE:     ${ARRAY_GRAFIK[0]}"
	# echo "   RESOLUTION: ${ARRAY_GRAFIK[1]}"
	# echo
	#
	# #get ica-sessions from database
	# ARRAY_SESSIONS=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select session from cfg_session where serial='${ALX_SERIAL}'")
	#
	# echo " SESSIONS:"
	# declare -i i=0
	# for x in ${ARRAY_SESSIONS}
	# do
	# ((i++))
	# echo "   SESSION${i}:   ${x}"
	# done
	# echo
	#
	# #now write these settings
	# local SETTINGSPATH
	#
	# #network
	#
	# #settings must be also set on system, so we put this to menu
	# SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	#
	# [ ! -d ${SETTINGSPATH}/modules ] && install -d ${SETTINGSPATH}/modules
	# echo "${ARRAY_NETWORK[0]}" > ${SETTINGSPATH}/modules/modules
	#
	# [ ! -d ${SETTINGSPATH}/network ] && install -d ${SETTINGSPATH}/network
	# echo "${MY_HOSTNAME}" > ${SETTINGSPATH}/network/hostname
	# echo "${ARRAY_NETWORK[1]}" > ${SETTINGSPATH}/network/domain
	# echo "${ARRAY_NETWORK[2]}" > ${SETTINGSPATH}/network/networking
	# [ -n "${ARRAY_NETWORK[3]}" ] && echo "${ARRAY_NETWORK[3]}" > ${SETTINGSPATH}/network/netmask
	# [ -n "${ARRAY_NETWORK[4]}" ] && echo "${ARRAY_NETWORK[4]}" > ${SETTINGSPATH}/network/dns
	# [ -n "${ARRAY_NETWORK[5]}" ] && echo "${ARRAY_NETWORK[5]}" > ${SETTINGSPATH}/network/gateway
	# [ -n "${ARRAY_NETWORK[6]}" ] && echo "${ARRAY_NETWORK[6]}" > ${SETTINGSPATH}/network/broadcast
	# [ -n "${ARRAY_NETWORK[7]}" ] && echo "${ARRAY_NETWORK[7]}" > ${SETTINGSPATH}/network/ip
57
	validate_networking(){
	#source /opt/alx-config/Configurator/config_functions.sh
58
59	local x i all LOCAL_NETWORK DB_NETWORK SETTINGSPATH	# read_cmdline ${item}
60		read_cmdline()
61	#all arrays:	{
62	# ->  hostname modules domain networking ip netmask dns gateway broadcast	local i
63
64	#networking	for i in $(< /proc/cmdline)
	#get settings from local system
	SETTINGSPATH=${SETTINGS_TEMPLATE}/system
	declare -i i=0
	for x in network/hostname \
	modules/modules \
	network/domain \
	network/networking \
	network/ip \
	network/netmask \
	network/dns \
	network/gateway \
	network/broadcast
	do
	if [ -f ${SETTINGSPATH}/${x} ]
	then
	#file exist, then use content
	LOCAL_NETWORK[${i}]="$(< ${SETTINGSPATH}/${x})"
	else
	LOCAL_NETWORK[${i}]=""
	fi
	((i++))
	done
	#get settings from database
	# DB_NETWORK[0]=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select hostname from cfg_network where serial='${ALX_SERIAL}'")
	all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select hostname,
	module,
	domain,
	networking,
	ip,
	netmask,
	dns,
	gateway,
	broadcast
	from cfg_network where serial='${ALX_SERIAL}'")
	#split'em up and put in an array
	declare -i i=0
	for x in ${all}
	do
	DB_NETWORK[${i}]=${x}
	((i++))
	done
	#needed by the small hotfix
	local FIX_ME
	FIX_ME="${DB_NETWORK[2]}"
	#now compare this stuff if they are equal
	for ((i=0; i < 9; i++))
65	do	do
66	if [ "${DB_NETWORK[${i}]}" = "${LOCAL_NETWORK[${i}]}" ]	[[ ${i} = $1 ]] && return 0
	then
	echo "${i}: ${DB_NETWORK[${i}]} == ${LOCAL_NETWORK[${i}]}"
	#delete equal stuff from DB_NETWORK
	DB_NETWORK[${i}]="*NULL*"
	else
	echo "${i}: ${DB_NETWORK[${i}]} != ${LOCAL_NETWORK[${i}]}"
	fi
67	done	done
	#update configs
	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	declare -i i=0
	for x in network/hostname \
	modules/modules \
	network/domain \
	network/networking \
	network/ip \
	network/netmask \
	network/dns \
	network/gateway \
	network/broadcast
	do
	#update only staff wich wasn't overwritten
	if [ "${DB_NETWORK[${i}]}" != "*NULL*" ]
	then
	#create directory if not exist
	if [ ! -d $(dirname ${SETTINGSPATH}/${x}) ]
	then
	install -d $(dirname ${SETTINGSPATH}/${x})
	fi
	echo "${DB_NETWORK[${i}]}" > ${SETTINGSPATH}/${x}
	# theses fucking config functions:
	# network gets only updated,
	# if ${SETTINGS_TEMPLATE}/menu/network/networking exist
	# so we force an update here
	if [ ! -f ${SETTINGSPATH}/network/networking ]
	then
	[ ! -d ${SETTINGSPATH}/network ] && install -d ${SETTINGSPATH}/network
	echo "${FIX_ME}" > ${SETTINGSPATH}/network/networking
	fi
68
69	#set update flag	return 1
	ALX_NETWORK_SETUP=true
	fi
	((i++))
	done
70	}	}
71
72		update_system_settings()
73		{
74		echo -e ${COLMAGENTA}"Checking system setup ..."${COLDEFAULT}
75
76		# get the modules settings
77		# ! is the first thing that must be configured !
78		config_modules
79
80	validate_xserver(){	# imports network settings from db
81	#source /opt/alx-config/Configurator/config_functions.sh	config_networking
	local x i all LOCAL_XSERVER DB_XSERVER SETTINGSPATH
82
83	#all arrays:	# imports x11 settings from db
84	# ->  xmodule resolution depth mouse monvendor monmodel hsync vref	config_x11
85
86	#xserver	# imports session settings from db
87	#get settings from local system	config_sessions
	#vga
	SETTINGSPATH=${SETTINGS_TEMPLATE}/system
	declare -i i=0
	for x in vga/vga \
	vga/vgares \
	vga/vgadepth
	do
	if [ -f ${SETTINGSPATH}/${x} ]
	then
	#file exist, then use content
	LOCAL_XSERVER[${i}]="$(< ${SETTINGSPATH}/${x})"
	else
	LOCAL_XSERVER[${i}]=""
	fi
	((i++))
	done
	#mouse
	if [ -f ${SETTINGSPATH}/mouse/mouse ]
	then
	#file exist, then use content
	LOCAL_XSERVER[3]="$(< ${SETTINGSPATH}/mouse/mouse)"
	else
	LOCAL_XSERVER[3]=""
	fi
	#monitor
	local myvendor mymodel hsync vref
	if [ -f ${SETTINGSPATH}/monitor/monitor ]
	then
	source ${SETTINGSPATH}/monitor/monitor
	declare -i i=4
	for x in "${myvendor}" \
	"${mymodel}" \
	"${hsync}" \
	"${vref}"
	do
	LOCAL_XSERVER[${i}]="${x}"
	((i++))
	done
	else
	LOCAL_XSERVER[4]=""
	LOCAL_XSERVER[5]=""
	LOCAL_XSERVER[6]=""
	LOCAL_XSERVER[7]=""
	fi
	#get settings from database
	all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select module,
	resolution,
	depth
	from cfg_graphic where serial='${ALX_SERIAL}'")
	#split'em up and put in an array
	declare -i i=0
	for x in ${all}
	do
	DB_XSERVER[${i}]=${x}
	((i++))
	done
	# read mouse
	DB_XSERVER[3]=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select mouse from cfg_input where serial='${ALX_SERIAL}'")
	#monitors
	# all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select vendor,
	# model,
	# hsync,
	# vrefresh
	# from cfg_monitor where serial='${ALX_SERIAL}'")
	all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select vendor,
	model,
	hsync,
	vrefresh
	from list_monitors
	inner join cfg_graphic
	on cfg_graphic.monitorid=list_monitors.id;")
	#split'em up and put in an array
	declare -i i=4
	for x in ${all}
	do
	DB_XSERVER[${i}]=${x}
	((i++))
	done
	# #now compare this stuff if they are equal
	# for ((i=0; i < 8; i++))
	# do
	# if [ "${DB_XSERVER[${i}]}" = "${LOCAL_XSERVER[${i}]}" ]
	# then
	# echo "${i}: ${DB_XSERVER[${i}]} == ${LOCAL_XSERVER[${i}]}"
	#
	# #delete equal stuff from DB_NETWORK
	# DB_XSERVER[${i}]="*NULL*"
	#
	# else
	# echo "${i}: ${DB_XSERVER[${i}]} != ${LOCAL_XSERVER[${i}]}"
	# fi
	# done
	#
	#
	# #update configs
	# SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	# #xserver general
	# declare -i i=0
	# for x in vga/vga \
	# vga/vgares \
	# vga/vgadepth \
	# mouse/mouse
	# do
	# #update only staff wich wasn't overwritten
	# if [ "${DB_XSERVER[${i}]}" != "*NULL*" ]
	# then
	# #create directory if not exist
	# if [ ! -d $(dirname ${SETTINGSPATH}/${x}) ]
	# then
	# install -d $(dirname ${SETTINGSPATH}/${x})
	# fi
	# echo "${DB_XSERVER[${i}]}" > ${SETTINGSPATH}/${x}
	# #set update flag
	# ALX_XSERVER_SETUP=true
	# fi
	# ((i++))
	# done
	#
	# #xserver monitors
	# if [ "${DB_XSERVER[4]}" != "*NULL*" \
	# -o "${DB_XSERVER[5]}" != "*NULL*" \
	# -o "${DB_XSERVER[6]}" != "*NULL*" \
	# -o "${DB_XSERVER[7]}" != "*NULL*" ]
	# then
	# if [ ! -d ${SETTINGSPATH}/monitor ]
	# then
	# install -d ${SETTINGSPATH}/monitor
	# fi
	# echo "myvendor=\"${DB_XSERVER[4]}\"" > ${SETTINGSPATH}/monitor/monitor
	# echo "mymodel=\"${DB_XSERVER[5]}\"" >> ${SETTINGSPATH}/monitor/monitor
	# echo "hsync=\"${DB_XSERVER[6]}\"" >> ${SETTINGSPATH}/monitor/monitor
	# echo "vref=\"${DB_XSERVER[7]}\"" >> ${SETTINGSPATH}/monitor/monitor
	#
	# #set update flag
	# ALX_XSERVER_SETUP=true
	# fi
	# - damn fucking setup_xfree routine need to rewrite this fucking stuff -
	# setup_xfree will only run
	# if ${SETTINGS_TEMPLATE}/menu/vga/vga exist
	# so we must *always* update *all* settings if something has changed
88
89	#now compare this stuff if they are equal	# imports printer settings from db
90	for ((i=0; i < 8; i++))	config_printing
	do
	if [ "${DB_XSERVER[${i}]}" = "${LOCAL_XSERVER[${i}]}" ]
	then
	echo "${i}: ${DB_XSERVER[${i}]} == ${LOCAL_XSERVER[${i}]}"
	#delete equal stuff from DB_NETWORK
	#DB_XSERVER[${i}]="*NULL*"
	else
	echo "${i}: ${DB_XSERVER[${i}]} != ${LOCAL_XSERVER[${i}]}"
	fi
	done
	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	if [ "${DB_XSERVER[0]}" != "*NULL*" \
	-o "${DB_XSERVER[1]}" != "*NULL*" \
	-o "${DB_XSERVER[2]}" != "*NULL*" \
	-o "${DB_XSERVER[3]}" != "*NULL*" \
	-o "${DB_XSERVER[4]}" != "*NULL*" \
	-o "${DB_XSERVER[5]}" != "*NULL*" \
	-o "${DB_XSERVER[6]}" != "*NULL*" \
	-o "${DB_XSERVER[7]}" != "*NULL*" ]
	then
	[ ! -d ${SETTINGSPATH}/vga ] && install -d ${SETTINGSPATH}/vga
	[ ! -d ${SETTINGSPATH}/mouse ] && install -d ${SETTINGSPATH}/mouse
	[ ! -d ${SETTINGSPATH}/monitor ] && install -d ${SETTINGSPATH}/monitor
	echo "${DB_XSERVER[0]}" > ${SETTINGSPATH}/vga/vga
	echo "${DB_XSERVER[1]}" > ${SETTINGSPATH}/vga/vgares
	echo "${DB_XSERVER[2]}" > ${SETTINGSPATH}/vga/vgadepth
	echo "${DB_XSERVER[3]}" > ${SETTINGSPATH}/mouse/mouse
	echo "myvendor=\"${DB_XSERVER[4]}\"" > ${SETTINGSPATH}/monitor/monitor
	echo "mymodel=\"${DB_XSERVER[5]}\"" >> ${SETTINGSPATH}/monitor/monitor
	echo "hsync=\"${DB_XSERVER[6]}\"" >> ${SETTINGSPATH}/monitor/monitor
	echo "vref=\"${DB_XSERVER[7]}\"" >> ${SETTINGSPATH}/monitor/monitor
	#set update flag
	ALX_XSERVER_SETUP=true
	fi
	}
91
92		# imports auth settings from db
93		config_auth
94
95	validate_sessions(){	# exchange ssh rsa keys
96	#source /opt/alx-config/Configurator/config_functions.sh	HOME=/root config_ssh_auth
97
98	local x i all LOCAL_SESSIONS DB_SESSIONS SETTINGSPATH count	# import version info
99		config_version
	#all arrays:
	# ->  session1 session2 ... sessionN
	#no LOCAL_SESSIONS here, needs bubblesort
	#get settings from database
	all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select session from cfg_sessions where serial='${ALX_SERIAL}'")
	#split'em up and put in an array (only if $all not zero)
	declare -i i=0
	if [ -n "${all}" ]
	then
	for x in ${all}
	do
	DB_SESSIONS[${i}]=${x}
	((i++))
	done
	count=${i}
	else
	count=0
	fi
	## no compare here, can only done with bubblesort or s.th like that
	# shows only the new sessions
	declare -i i=0
	#count=${#DB_SESSIONS[*]} #---> not working gets always 1, why ?
	echo "Number of new sessions: ${count}"
	for ((i=0; i < count; i++))
	do
	echo "${i} - ${DB_SESSIONS[${i}]}"
	done
	#update local configs
	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	declare -i i=0
	#count=${#DB_SESSIONS[*]}
	if [ ${count} -gt 0 ]
	then
	#create directory if not exist
	[ ! -d ${SETTINGSPATH}/sessions ] && install -d ${SETTINGSPATH}/sessions
	#delete old sessions
	echo -n > ${SETTINGSPATH}/sessions/sessions
	for ((i=0; i < count; i++))
	do
	echo "${DB_SESSIONS[${i}]}" >> ${SETTINGSPATH}/sessions/sessions
	done
	#set update flag
	ALX_SESSION_SETUP=true
	fi
100	}	}
101
102		get_system_serial()
103		{
104		local CUR_IP CUR_MAC CUR_MTIME ALX_IFACE
105
106	validate_printing(){	if [[ ${ALX_CONFD_NETWORKING} = true ]]
	#source /opt/alx-config/Configurator/config_functions.sh
	local x i k all LOCAL_PRINTER DB_PRINTER SETTINGSPATH count
	#all arrays: [2 dimensions !]
	# ->  name1 name2 ... nameN
	# ->  name1 printingport ip share
	#later on, for now -> name1 port1 ip1 share1 name2 ....
	# seperator is 4
	#local PRINTERNAME PRINTING IP SHARE
	# update *always* printers from database;
	# compare with local settings cannot be done yet
	#get settings from database
	all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select printer_name,
	port,
	ip,
	share
	from cfg_printers where serial='${ALX_SERIAL}'")
	#split'em up and put in an array
	declare -i i=0
	declare -i k=0
	if [ -n "${all}" ]
107	then	then
108	for x in ${all}	ALX_IFACE="$(< ${SETTINGSPATH}/confd-networking)"
	do
	((k++))
	DB_PRINTER[${i}]="${DB_PRINTER[${i}]} ${x}"
	if [ ${k} -eq 4 ]
	then
	((i++))
	#reset $k
	declare -i k=0
	fi
	done
	count=${i}
109	else	else
110	count=0	ALX_IFACE="eth0"
	fi
	#echo settings
	echo "Number of new printers: ${count}"
	for ((i=0; i < count; i++))
	do
	echo "${i} printer:"
	for x in ${DB_PRINTER[${i}]}
	do
	echo "    ${x}"
	done
	done
	#import settings (only if counter > 0)
	local prnset
	#delete all printers (*always*)
	if [ -d ${SETTINGS_TEMPLATE}/system/printing ]
	then
	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	[ -d ${SETTINGSPATH}/delete ] && rm -rf ${SETTINGSPATH}/delete
	install -d ${SETTINGSPATH}/delete
	mv -f ${SETTINGS_TEMPLATE}/system/printing/* ${SETTINGSPATH}/delete
	rm -rf ${SETTINGS_TEMPLATE}/system/printing
	#set update flag (*always*)
	ALX_PRINTER_SETUP=true
	fi
	if [ ${count} -gt 0 ]
	then
	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	[ ! -d ${SETTINGSPATH}/printing ] && install -d ${SETTINGSPATH}/printing
	for ((i=0; i < count; i++))
	do
	declare -i k=0
	for x in ${DB_PRINTER[${i}]}
	do
	prnset[${k}]=${x}
	((k++))
	done
	echo "PRINTERNAME=${prnset[0]}" >  ${SETTINGSPATH}/printing/${prnset[0]}
	echo "PRINTING=${prnset[1]}" >> ${SETTINGSPATH}/printing/${prnset[0]}
	echo "IP=${prnset[2]}" >> ${SETTINGSPATH}/printing/${prnset[0]}
	echo "SHARE=${prnset[3]}" >> ${SETTINGSPATH}/printing/${prnset[0]}
	done
	#set update flag (*always*)
	ALX_PRINTER_SETUP=true
111	fi	fi
	}
	update_system_settings(){
	source /opt/alx-config/Configurator/config_functions.sh
112
113	echo -e ${COLMAGENTA}"Checking system setup ..."${COLDEFAULT}	# check if serial file exists
114		if [ -f /etc/alxconfig-ng/serial ] && [[ ${ALX_FORCED_RECHECK} = false ]]
	echo
	echo "network"
	validate_networking
	echo
	echo "xserver"
	validate_xserver
	echo
	echo "sessions"
	validate_sessions
	echo
	#echo "printers"
	#validate_printing
	#echo
	if [ "${ALX_NETWORK_SETUP}" == "true" ]
	then
	echo -e ${COLMAGENTA}"Updating network settings"${COLDEFAULT}
	setup_modules
	setup_network
	fi
	if [ "${ALX_XSERVER_SETUP}" == "true" ]
115	then	then
116	echo -e ${COLMAGENTA}"Updating xserver settings"${COLDEFAULT}	source /etc/alxconfig-ng/serial
	setup_xfree
	fi
	if [ "${ALX_SESSION_SETUP}" == "true" ]
	then
	echo -e ${COLMAGENTA}"Updating session settings"${COLDEFAULT}
	setup_sessions
	fi
	#if [ "${ALX_PRINTER_SETUP}" == "true" ]
	#then
	# echo -e ${COLMAGENTA}"Updating printer settings"${COLDEFAULT}
	# setup_printers
	#fi
	#clean up temp files
	local SETTINGSPATH
	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	#[ -d ${SETTINGSPATH} ] && rm -rf ${SETTINGSPATH}
	}
117
118	get_system_serial(){	# start preliminary networking (dhcp)
119		preliminary_network start
120
121	local CUR_IP CUR_MAC CUR_MTIME	# check if mysql server is reachable
122		# if not abort this script
123		if ! reach_mysql_server
124		then
125		preliminary_network stop
126		exit 1
127		fi
128
129	#check if serial file exists	CUR_IP=$(/sbin/ifconfig ${ALX_IFACE} | sed -n '/addr:/s/ [^r]*..//gp')
130	if [ -f /etc/alx-config/serial ]	CUR_MAC=$(/sbin/ifconfig ${ALX_IFACE} | grep HWaddr | cut -d ' ' -f11)
	then
	source /etc/alx-config/serial
	# if system is already configured, it *has* a hostname.
	# so we take the hostname of this system here
	source /etc/hostname
	#start preliminary networking (dhcp)
	preliminary_network start
	CUR_IP=$(/sbin/ifconfig eth0 | sed -n '/addr:/s/ [^r]*..//gp')
	CUR_MAC=$(/sbin/ifconfig eth0 | grep HWaddr | cut -d ' ' -f11)
131	CUR_MTIME=$(date +%s)	CUR_MTIME=$(date +%s)
132
133	echo -e ${COLOREDSTAR} "Trying to validate my serial ..."	echo -e ${COLOREDSTAR} "Trying to validate my serial ..."
134
135	#nice serial output	# nice serial output
136	$CURS_UP	$CURS_UP
137	$SET_WCOL	$SET_WCOL
138	echo "[ SN: ${ALX_SERIAL} ]"	echo "[ SN: ${ALX_SERIAL} ]"
	# #is this system outdated ?
	# #MY_HOSTNAME=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# # "select hostname from cfg_serial where id='${ALX_SERIAL}'")
	#
	# #we do this now with the date instead of the hostname
	# local MY_ALX_REG_DATE
	# MY_ALX_REG_DATE=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select mtime from client_serial where serial='${ALX_SERIAL}'")
	#
	# #if [ "${MY_HOSTNAME}" == "${HOSTNAME}" ]
	# if [ "${MY_ALX_REG_DATE}" == "${ALX_REG_DATE}" ]
	# then
	# #set ALX_STATE to ok so everybody that everything was ok
	# ALX_STATE=ok
	#
	# evaluate_retval
	# else
	# #print false (works only if this is the first statement here)
	# evaluate_retval
	#
	# #set ALX_STATE to error so everybody sees there was an error
	# ALX_STATE=error
	# fi
139
140	if validate_serial "${ALX_SERIAL}" "${ALX_REG_DATE}" "${CUR_MAC}"	if validate_serial "${ALX_SERIAL}" "${ALX_REG_DATE}" "${CUR_MAC}"
141	then	then
142	ALX_STATE="ok"	ALX_STATE="ok"
143	else	else
144		# abort on non valid serial
145	ALX_STATE="invalid serial"	ALX_STATE="invalid serial"
146		echo "ALX_STATE=\"${ALX_STATE}\"" > /etc/alxconfig-ng/state/state
147		show_invalid_serial_msg
148		exit 1
149	fi	fi
150
151	else	else
152	#run hardware detection	# run hardware detection
153	echo	echo
154	echo -e ${COLMAGENTA}"Preparing system for first boot"${COLDEFAULT}	if [[ ${ALX_FORCED_RECHECK} = true ]]
155		then
156		echo -e ${COLMAGENTA}"Hardware autodetection forced by system-administrator"${COLDEFAULT}
157		# always disable CONFD_NETWORKING here
158		export ALX_CONFD_NETWORKING="false"
159		else
160		echo -e ${COLMAGENTA}"Preparing system for first boot"${COLDEFAULT}
161		fi
162	ALX_HW_DETECT=true	ALX_HW_DETECT=true
163	/etc/init.d/hwdetect start	/etc/init.d/hwdetect start
164
165	#set hostname to alx_default_hostname	# set hostname to alx_default_hostname
166		# use old hostname if this is a forced re-check
167		[[ ${ALX_FORCED_RECHECK} = true ]] && ALX_DEFAULT_HOSTNAME="$(< /etc/hostname)"
168	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx
169	HOSTNAME="${ALX_DEFAULT_HOSTNAME}"	HOSTNAME="${ALX_DEFAULT_HOSTNAME}"
170
171	#update the hostname on the system for sure	# update the hostname on the system for sure
172	echo "HOSTNAME=${HOSTNAME}" > /etc/hostname	echo "${HOSTNAME}" > /etc/hostname
173
174	#start preliminary networking (dhcp)	# start preliminary networking (dhcp)
175	preliminary_network start	preliminary_network start
176
177		# check if mysql server is reachable
178		# if not abort this script
179		if ! reach_mysql_server
180		then
181		preliminary_network stop
182		exit 1
183		fi
184
185	CUR_IP=$(/sbin/ifconfig eth0 | sed -n '/addr:/s/ [^r]*..//gp')	CUR_IP=$(/sbin/ifconfig eth0 | sed -n '/addr:/s/ [^r]*..//gp')
186	CUR_MAC=$(/sbin/ifconfig eth0 | grep HWaddr | cut -d ' ' -f11)	CUR_MAC=$(/sbin/ifconfig eth0 | grep HWaddr | cut -d ' ' -f11)
187	CUR_MTIME=$(date +%s)	CUR_MTIME=$(date +%s)
188
189		# abort now if this is a forced re-check
190		if [[ ${ALX_FORCED_RECHECK} = true ]]
191		then
192		# but first check the serial
193		source /etc/alxconfig-ng/serial
194
195		echo -e ${COLOREDSTAR} "Trying to validate my serial ..."
196
197		# nice serial output
198		$CURS_UP
199		$SET_WCOL
200		echo "[ SN: ${ALX_SERIAL} ]"
201
202		if validate_serial "${ALX_SERIAL}" "${ALX_REG_DATE}" "${CUR_MAC}"
203		then
204		ALX_STATE="ok"
205		else
206		# abort on non valid serial
207		ALX_STATE="invalid serial"
208		echo "ALX_STATE=${ALX_STATE}" > /etc/alxconfig-ng/state/state
209		show_invalid_serial_msg
210		exit 1
211		fi
212
213		# write current state to temp file
214		echo "ALX_STATE=\"${ALX_STATE}\"" > /etc/alxconfig-ng/state/state
215		[ -f /hardware-auto-detection ] && rm /hardware-auto-detection
216
217		# now export ALX_FORCED_RECHECK=true
218		# that the setting will be updated not inserted !
219		export ALX_FORCED_RECHECK=true
220		return 0
221		fi
222
223	echo -e ${COLOREDSTAR} "Trying to get new serial ..."	echo -e ${COLOREDSTAR} "Trying to get new serial ..."
	#request new serial
	#ALX_REG_DATE="$(date +%F)"
	#we're using the mtime now (better for vaildating the serial)
	mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"insert into client_serials(
	mtime,
	mac
	)
	values(
	'${CUR_MTIME}',
	'${CUR_MAC}'
	);"
	#then validate and retrieve serial
	### warning must be changed that only the LAST ID will be fetched,  ###
	### or you get error if the computer name and date are the same     ###
	### you have more then one serial number than                       ###
	#not 100% working may get more than *one* id
	#ALX_SERIAL=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select id from cfg_serial where datum='${ALX_REG_DATE}' and hostname='${HOSTNAME}'")
	#select highest id only (added max)
	ALX_SERIAL=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select max(serial) from client_serials where mtime='${CUR_MTIME}' and mac='${CUR_MAC}'")
224
225	if [ "${ALX_SERIAL}" != NULL ]	# request a new serial; one command now (cause must be done in the same session)
226		ALX_SERIAL=$(mysqldo "insert into client_serials (mtime, mac) values('${CUR_MTIME}','${CUR_MAC}');
227		select last_insert_id();")
228
229		if [[ ${ALX_SERIAL} != NULL ]]
230	then	then
231	#nice serial output	# nice serial output
232	$CURS_UP	$CURS_UP
233	$SET_WCOL	$SET_WCOL
234	echo "[ SN: ${ALX_SERIAL} ]"	echo "[ SN: ${ALX_SERIAL} ]"
235
236	#set ALX_STATE to ok so everybody that everything was ok	# set ALX_STATE to ok so everybody knows that everything was ok
237	ALX_STATE=ok	ALX_STATE=ok
238
239	echo "ALX_SERIAL=${ALX_SERIAL}" > /etc/alx-config/serial	echo "ALX_SERIAL=\"${ALX_SERIAL}\"" > /etc/alxconfig-ng/serial
240	echo "ALX_REG_DATE=${CUR_MTIME}" >> /etc/alx-config/serial	echo "ALX_REG_DATE=\"${CUR_MTIME}\"" >> /etc/alxconfig-ng/serial
241
242	evaluate_retval	evaluate_retval
243	else	else
244	#print false (works only if this is the first statement here)	# print false (works only if this is the first statement here)
245	evaluate_retval	evaluate_retval
246
247	#set ALX_STATE to error so everybody sees there was an error	# set ALX_STATE to error so everybody sees there was an error
248	ALX_STATE=error	ALX_STATE=error
249
250	#show an error that no new serial was found	# show an error that no new serial was found
251	#nice serial output	# nice serial output
252	$CURS_UP	$CURS_UP
253	$SET_WCOL	$SET_WCOL
254	echo -e "[ SN: ${COLRED}None, 0${COLDEFAULT} ]"	echo -e "[ SN: ${COLRED}None, 0${COLDEFAULT} ]"
255	fi	fi
256	fi	fi
257
258	#write current state to temp file	# write current state to temp file
259	echo "ALX_STATE=${ALX_STATE}" > /etc/alx-config/state/state	echo "ALX_STATE=\"${ALX_STATE}\"" > /etc/alxconfig-ng/state/state
260		echo "ALX_IFACE=\"${ALX_IFACE}\"" >> /etc/alxconfig-ng/state/state
261	}	}
262
263
264	check_is_configured() {	check_is_configured()
265	if [ -f /etc/alx-config/state/configured ]	{
266		if [ -f /etc/alxconfig-ng/state/configured ]
267	then	then
268	export ALX_CONFIGURED=true	export ALX_CONFIGURED=true
269	else	else
#	Line 927  check_is_configured() {	Line 273  check_is_configured() {
273
274
275	# imports current settings to the database resolved by the hardware detection	# imports current settings to the database resolved by the hardware detection
276	import_settings_to_db() {	import_settings_to_db()
277	#note: networking is always 'dhcp' if hw was autodetected	{
278	#note: default_domain/hostname is set in config.rc	# note: networking is always 'dhcp' if hw was autodetected
279		# note: default_domain/hostname is set in config.rc
280	#to be safe, we do some sanity checks
281		# to be safe, we do some sanity checks
282	[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain	[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain
283	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx
284
285	#vars used by hwdetect	# vars used by hwdetect
286	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
287	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
288	local MOUSETYPE XMOUSETYPE FULLNAME DEVICE	local MOUSETYPE XMOUSETYPE FULLNAME DEVICE
289
290	#get setting from hwdetect	# get setting from hwdetect
291	source /etc/sysconfig/hwsetup/knoppix	source /etc/sysconfig/hwsetup/knoppix
292	source /etc/sysconfig/hwsetup/mouse	source /etc/sysconfig/hwsetup/mouse
293
294	echo	echo
295	echo -e ${COLMAGENTA}"Importing detected settings to database"${COLDEFAULT}	echo -e ${COLMAGENTA}"Importing detected settings to database"${COLDEFAULT}
296
297	#network	# network
298	echo -e "      Network settings ..."	echo -e "      Network settings ..."
299	mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \	if [[ ${ALX_CONFD_NETWORKING} = true ]]
300	"insert into cfg_network(	then
301	hostname,	# get settings
302	serial,	#source ${rc_base}/init.d/network &> /dev/null
303	module,	for iface in $(onboot_interface_list ${network_settings}/net.*)
304	domain,	do
305	networking	[[ $(< ${SETTINGSPATH}/confd-networking) != ${iface} ]] && continue
306	)	echo "WARNING: only importing settings for interface [ ${iface} ] !"
307	values(	source ${network_settings}/net.${iface} || exit 1
308	'${ALX_DEFAULT_HOSTNAME}',	NETCARD_DRIVER="$(cat /etc/modules.d/net.${iface} | cut -d' ' -f3)"
309	'${ALX_SERIAL}',
310	'${NETCARD_DRIVER}',	mysqldo "insert into cfg_network(
311	'${ALX_DEFAULT_DOMAIN}',	hostname,
312	'dhcp'	serial,
313	);"	module,
314		domain,
315		networking,
316		netmask,
317		dns,
318		gateway,
319		broadcast,
320		ip,
321		forcemacto,
322		wireless_bitrate,
323		wireless_channel,
324		wireless_essid,
325		wireless_frequency,
326		wireless_mode,
327		wireless_nick,
328		wireless_auth_mode,
329		wireless_key_length,
330		wireless_key,
331		wireless_key_ascii
332		)
333		values(
334		'${ALX_DEFAULT_HOSTNAME}',
335		'${ALX_SERIAL}',
336		'${NETCARD_DRIVER}',
337		'${ALX_DEFAULT_DOMAIN}',
338		'${NETWORKING}',
339		'${NETMASK}',
340		'${NAMESERVER}',
341		'${GATEWAY}',
342		'${BROADCAST}',
343		'${IP}',
344		'${FORCE_MAC_TO}',
345		'${WIRELESS_BITRATE}',
346		'${WIRELESS_CHANNEL}',
347		'${WIRELESS_ESSID}',
348		'${WIRELESS_FREQUENCY}',
349		'${WIRELESS_MODE}',
350		'${WIRELESS_NICK}',
351		'${WIRELESS_AUTH_MODE}',
352		'${WIRELESS_KEY_LENGTH}',
353		'${WIRELESS_KEY}',
354		'${WIRELESS_KEY_ASCII}'
355		);"
356
357		# only insert the *FIRST* iface
358		break
359		done
360		else
361		mysqldo "insert into cfg_network(
362		hostname,
363		serial,
364		module,
365		domain,
366		networking
367		)
368		values(
369		'${ALX_DEFAULT_HOSTNAME}',
370		'${ALX_SERIAL}',
371		'${NETCARD_DRIVER}',
372		'${ALX_DEFAULT_DOMAIN}',
373		'dhcp'
374		);"
375		fi
376	evaluate_retval	evaluate_retval
377
378	#xserver	# xserver
379	echo -e "      Graphic settings ..."	echo -e "      Graphic settings ..."
380	#xserver general	# xserver general
381	( mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \	( mysqldo "insert into cfg_graphic(
	"insert into cfg_graphic(
382	serial,	serial,
383	module,	module,
384	resolution,	resolution,
385	depth	depth,
386		refresh_rate
387	)	)
388	values(	values(
389	'${ALX_SERIAL}',	'${ALX_SERIAL}',
390	'${XMODULE}',	'${XMODULE}',
391	'1024x768',	'1024x768',
392	'16'	'16',
393	);";	'60'
394	#xserver monitor	);"; )
395	mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \	evaluate_retval
396	"insert into cfg_monitor(
397		# input
398		echo -e "      Input settings ..."
399		mysqldo "insert into cfg_input(serial,mouse) values('${ALX_SERIAL}','${XMOUSETYPE}');"
400		evaluate_retval
401
402		# auth
403		echo -e "      Authentification settings ..."
404		mysqldo "insert into client_auth(
405	serial,	serial,
406	vendor,	username,
407	model,	shell,
408	hsync,	vnc,
409	vrefresh	samba,
410		station
411	)	)
412	values(	values(
413	'${ALX_SERIAL}',	'${ALX_SERIAL}',
414	'Aamazing',	'${ALX_UNPRIV_USER}',
415	'CM-1528-FS',	'',
416	'28-64',	'',
417	'47-104'	'',
418	);";	''
419		);"
420	# input	evaluate_retval
421	mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
422	"insert into cfg_input(serial,mouse) values('${ALX_SERIAL}','${XMOUSETYPE}');";)	# exchange ssh rsa keys - the first boot needs this !
423		# or no reboot will work via the webadmin
424		echo -e "      SSH authentification settings ..."
425		HOME=/root config_ssh_auth
426		evaluate_retval
427
428		# autostart
429		echo -e "      Autostart settings ..."
430		mysqldo "insert into cfg_autostart(serial,session) values('${ALX_SERIAL}','');"
431
432		# screensaver
433		echo -e "      Screensaver settings ..."
434		mysqldo "insert into cfg_screensaver(serial,screensaver) values('${ALX_SERIAL}','')"
435
436		# version info
437		local alx_os
438		local alx_utils
439		alx_os="$(< /etc/mageversion)"
440		alx_utils="$(magequery -n alxconfig-ng-alx | sed 's:.*\[\ \(.*\)\ \].*:\1:')"
441		alx_utils="${alx_utils/alxconfig-ng-alx-}"
442		mysqldo "insert into client_version(serial,os,utils) values('${ALX_SERIAL}','${alx_os}','${alx_utils}')"
443
444	evaluate_retval	evaluate_retval
445	}	}
446
447	# imports current settings to the local system resolved by the hardware detection	# imports current settings to the database resolved by the hardware detection
448	import_settings_local(){	update_settings_in_db()
449	#note: networking is always 'dhcp' if hw was autodetected	{
450	#note: default_domain/hostname is set in config.rc	# note: networking is always 'dhcp' if hw was autodetected
451		# note: default_domain/hostname is set in config.rc or exported
452	#to be safe, we do some sanity checks	# note: we updating only hardware settings here !
453
454		# to be safe, we do some sanity checks
455	[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain	[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain
456	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx
457
458	#vars used by hwdetect	# vars used by hwdetect
459	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
460	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
461	local MOUSETYPE XMOUSETYPE FULLNAME DEVICE	local MOUSETYPE XMOUSETYPE FULLNAME DEVICE
462
463		# get setting from hwdetect
	#get setting from hwdetect
464	source /etc/sysconfig/hwsetup/knoppix	source /etc/sysconfig/hwsetup/knoppix
465	source /etc/sysconfig/hwsetup/mouse	source /etc/sysconfig/hwsetup/mouse
466
467	echo	echo
468	echo -e ${COLMAGENTA}"Importing detected settings to local system"${COLDEFAULT}	echo -e ${COLMAGENTA}"Updating detected settings in database"${COLDEFAULT}
469
470		# network
	#allready configured, no update needed so we put it to system
	SETTINGSPATH=${SETTINGS_TEMPLATE}/system
	#network
471	echo -e "      Network settings ..."	echo -e "      Network settings ..."
472		if [[ ${ALX_CONFD_NETWORKING} = true ]]
473		then
474		# get settings
475		#source ${rc_base}/init.d/network &> /dev/null
476		for iface in $(onboot_interface_list ${network_settings}/net.*)
477		do
478		[[ $(< ${SETTINGSPATH}/confd-networking) != ${iface} ]] && continue
479		echo "WARNING: only importing settings for interface [ ${iface} ] !"
480		source ${network_settings}/net.${iface} || exit 1
481		NETCARD_DRIVER="$(cat /etc/modules.d/net.${iface} | cut -d' ' -f3)"
482
483		mysqldo "update cfg_network set
484		hostname='${ALX_DEFAULT_HOSTNAME}',
485		module='${NETCARD_DRIVER}',
486		domain='${ALX_DEFAULT_DOMAIN}',
487		networking='${NETWORKING}',
488		netmask='${NETMASK}',
489		dns='${NAMESERVER}',
490		gateway='${GATEWAY}',
491		broadcast='${BROADCAST}',
492		ip='${IP}',
493		forcemacto='${FORCE_MAC_TO}',
494		wireless_bitrate='${WIRELESS_BITRATE}',
495		wireless_channel='${WIRELESS_CHANNEL}',
496		wireless_essid='${WIRELESS_ESSID}',
497		wireless_frequency='${WIRELESS_FREQUENCY}',
498		wireless_mode='${WIRELESS_MODE}',
499		wireless_nick='${WIRELESS_NICK}',
500		wireless_auth_mode='${WIRELESS_AUTH_MODE}',
501		wireless_key_length='${WIRELESS_KEY_LENGTH}',
502		wireless_key='${WIRELESS_KEY}',
503		wireless_key_ascii='${WIRELESS_KEY_ASCII}'
504		where serial=${ALX_SERIAL};"
505
506	[ ! -d ${SETTINGSPATH}/modules ] && install -d ${SETTINGSPATH}/modules	# only insert the *FIRST* iface
507	echo "${NETCARD_DRIVER}" > ${SETTINGSPATH}/modules/modules	break
508		done
509	[ ! -d ${SETTINGSPATH}/network ] && install -d ${SETTINGSPATH}/network	else
510	( echo "${ALX_DEFAULT_HOSTNAME}" > ${SETTINGSPATH}/network/hostname;	mysqldo "update cfg_network set
511	echo "${ALX_DEFAULT_DOMAIN}" > ${SETTINGSPATH}/network/domain;	hostname='${ALX_DEFAULT_HOSTNAME}',
512	echo "dhcp" > ${SETTINGSPATH}/network/networking )	module='${NETCARD_DRIVER}',
513		domain='${ALX_DEFAULT_DOMAIN}',
514		networking='dhcp'
515		where serial=${ALX_SERIAL};"
516		fi
517	evaluate_retval	evaluate_retval
518
519		# xserver
	#xserver
520	echo -e "      Graphic settings ..."	echo -e "      Graphic settings ..."
521		# xserver general
522	[ ! -d ${SETTINGSPATH}/vga ] && install -d ${SETTINGSPATH}/vga	mysqldo "update cfg_graphic set
523	[ ! -d ${SETTINGSPATH}/mouse ] && install -d ${SETTINGSPATH}/mouse	module='${XMODULE}',
524	[ ! -d ${SETTINGSPATH}/monitor ] && install -d ${SETTINGSPATH}/monitor	resolution='1024x768',
525	( echo "${XMODULE}" > ${SETTINGSPATH}/vga/vga;	depth='16',
526	echo "16" > ${SETTINGSPATH}/vga/vgadepth;	refresh_rate='60'
527	echo "1024x768" > ${SETTINGSPATH}/vga/vgares;	where serial=${ALX_SERIAL};"
	echo "${XMOUSETYPE}" > ${SETTINGSPATH}/mouse/mouse;
	echo "myvendor=\"Aamazing\"" > ${SETTINGSPATH}/monitor/monitor;
	echo "mymodel=\"CM-1528-FS\"" >> ${SETTINGSPATH}/monitor/monitor;
	echo "hsync=\"28-64\"" >> ${SETTINGSPATH}/monitor/monitor;
	echo "vref=\"47-104\"" >> ${SETTINGSPATH}/monitor/monitor;)
528	evaluate_retval	evaluate_retval
529
530	#set system state to 'already configured'	# input
531	touch /etc/alx-config/state/configured	echo -e "      Input settings ..."
532		mysqldo "update cfg_input set mouse='${XMOUSETYPE}' where serial=${ALX_SERIAL};"
533		evaluate_retval
534
535		# version info
536		local alx_os
537		local alx_utils
538		alx_os="$(< /etc/mageversion)"
539		alx_utils="$(magequery -n alxconfig-ng-alx | sed 's:.*\[\ \(.*\)\ \].*:\1:')"
540		alx_utils="${alx_utils/alxconfig-ng-alx-}"
541		mysqldo "update client_version set os='${alx_os}', utils='${alx_utils}' where serial=${ALX_SERIAL};"
542	}	}
543
544	#start|stop	# imports current settings to the local system resolved by the hardware detection
545	preliminary_network(){	# we only need the network settings
546		import_settings_local()
547		{
548		# note: networking is always 'dhcp' if hw was autodetected
549		# note: default_domain/hostname is set in config.rc
550
551		# to be safe, we do some sanity checks
552		[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain
553		[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx
554
555		# vars used by hwdetect
556		local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
557		local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
558		local MOUSETYPE XMOUSETYPE FULLNAME DEVICE
559
560		# get setting from hwdetect
561		source /etc/sysconfig/hwsetup/knoppix
562
563		echo
564		echo -e ${COLMAGENTA}"Importing detected settings to local system"${COLDEFAULT}
565
566		if [[ ${ALX_CONFD_NETWORKING} = false ]]
567		then
568		#[ ! -d ${SETTINGSPATH} ] && install -d ${SETTINGSPATH}
569		#echo "${NETCARD_DRIVER}" > ${SETTINGSPATH}/modules
570
571		# set an device alias for modprobe.conf and modules.conf
572		[ ! -d /etc/modules.d ] && install -d /etc/modules.d
573		[ ! -d /etc/modprobe.d ] && install -d /etc/modprobe.d
574		echo "alias eth0 ${NETCARD_DRIVER}" > /etc/modules.d/net.eth0
575		echo "alias eth0 ${NETCARD_DRIVER}" > /etc/modprobe.d/net.eth0
576
577		# regenerate modprobe.conf
578		[ -x $(which modules-update) ] && modules-update || echo "cannot regen modprobe.conf"
579		evaluate_retval
580		fi
581
582		# set system state to 'already configured'
583		touch /etc/alxconfig-ng/state/configured
584
585		# install slim desktopmanager configuration
586		cat ${ALX_SKELETONS}/slim/slim.conf > /etc/slim.conf
587		sed -i "s:@@USERNAME@@:${ALX_UNPRIV_USER}:" /etc/slim.conf
588
589		# install a sane xinitrc
590		echo "exec startfluxbox" > ${ALX_UNPRIV_HOME}/.xinitrc
591
592		# if only an recheck was forced than abort now
593		[[ ${ALX_FORCED_RECHECK} = true ]] && return 0
594
595		# create a fresh fluxbox directory
596		[ -d ${ALX_UNPRIV_HOME}/.fluxbox ] && rm -rf ${ALX_UNPRIV_HOME}/.fluxbox
597		install -d ${ALX_UNPRIV_HOME}/.fluxbox
598
599		# now generate fluxbox config files
600
601		# fluxbox main config
602		cat ${ALX_SKELETONS}/fluxbox/init \
603		> ${ALX_UNPRIV_HOME}/.fluxbox/init
604
605		# fluxbox autostart
606		cat ${ALX_SKELETONS}/fluxbox/apps \
607		> ${ALX_UNPRIV_HOME}/.fluxbox/apps
608
609		# fluxbox menu header
610		cat ${ALX_SKELETONS}/fluxbox/menu.header \
611		> ${ALX_UNPRIV_HOME}/.fluxbox/menu
612
613		# now fix it with proper messages :P
614		local ver="$(< /etc/mageversion)"
615		sed -i "s:@CHANGEME@:alx-${ver}  #${ALX_SERIAL}:g" \
616		${ALX_UNPRIV_HOME}/.fluxbox/menu
617
618		# add a newline (maybe there is no crlf in the header)
619		echo >> ${ALX_UNPRIV_HOME}/.fluxbox/menu
620
621		# fluxbox menu footer
622		cat ${ALX_SKELETONS}/fluxbox/menu.footer \
623		>> ${ALX_UNPRIV_HOME}/.fluxbox/menu
624
625		# add a newline (maybe there is no crlf in the footer)
626		echo >> ${ALX_UNPRIV_HOME}/.fluxbox/menu
627
628
629		# setup some standart icons (sysinfo.lnk)
630		# basic config
631		cat ${ALX_SKELETONS}/xtdesktop/xtdeskrc > ${ALX_UNPRIV_HOME}/.xtdeskrc
632
633		# clean desktop icon location
634		[ -d ${ALX_UNPRIV_HOME}/.xtdesktop ] && rm -rf ${ALX_UNPRIV_HOME}/.xtdesktop
635		install -d ${ALX_UNPRIV_HOME}/.xtdesktop
636
637		# last but not least gen a icon with some sys informations
638		local sysinfo
639		local osversion
640		local xres
641		local yres
642
643		osversion="$(< /etc/mageversion)"
644		sysinfo="Hostname: ${ALX_DEFAULT_HOSTNAME} Serial: #${ALX_SERIAL} OS: alx-${osversion} Kernel: $(uname -r)"
645
646		# at first boot we got always a resolution of 1024x768-16@60
647		# middle of the screen
648		# (no txt - length required, xtdesk manage that itself)
649		xres="$((1024 / 2))"
650		# default y pos (full yres -22 !)
651		yres="$((768 - 22 ))"
652
653		generate_icon \
654		--name "${sysinfo}" \
655		--command "exit 0" \
656		--icon "${ALX_SESSIONS_ICONS}/sysinfo.png" \
657		--dest "${ALX_UNPRIV_HOME}/.xtdesktop/sysinfo.lnk" \
658		--xres "${xres}" \
659		--yres "${yres}" \
660		--icon-width "1" \
661		--icon-height "1"
662
663		# create a xinitrc
664		echo "exec startfluxbox" > ${ALX_UNPRIV_HOME}/.xinitrc
665
666		# set correct permissions
667		chown ${ALX_UNPRIV_USER}:${ALX_UNPRIV_GROUP} ${ALX_UNPRIV_HOME}
668		chown ${ALX_UNPRIV_USER}:${ALX_UNPRIV_GROUP} ${ALX_UNPRIV_HOME}/.fluxbox
669		chmod 0755 ${ALX_UNPRIV_HOME}/.fluxbox
670		chmod 0755 ${ALX_UNPRIV_HOME}/.xtdesktop
671		chmod 0644 ${ALX_UNPRIV_HOME}/.xtdeskrc
672		chmod 0644 ${ALX_UNPRIV_HOME}/.xinitrc
673		}
674
675		# start|stop
676		preliminary_network()
677		{
678	local module	local module
679
680	if [ -f /etc/alx-config/state/configured ]	if [ -f /etc/alxconfig-ng/state/configured ]
681	then	then
682	#get module name	# compat for old clients
683	module=$(cat ${SETTINGS_TEMPLATE}/system/modules/modules)	if [ -f ${SETTINGSPATH}/modules ]
684	modprobe ${module}	then
685		# get module name
686		module=$(cat ${SETTINGSPATH}/modules)
687		modprobe ${module}
688		fi
689	else	else
690	#vars used by hwdetect	# vars used by hwdetect
691	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
692	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
693
694	#get setting from hwdetect	# get setting from hwdetect
695	source /etc/sysconfig/hwsetup/knoppix	source /etc/sysconfig/hwsetup/knoppix
696	modprobe ${NETCARD_DRIVER}	modprobe ${NETCARD_DRIVER}
697	fi	fi
698
699	case $1 in	case $1 in
700	start)	start)
701	# keeping like always safe:	# keeping like always safe:
#	Line 1097  preliminary_network(){	Line 709  preliminary_network(){
709	else	else
710	rm -f /var/run/dhcpcd-eth?.pid	rm -f /var/run/dhcpcd-eth?.pid
711	fi	fi
712		[[ ${ALX_CONFD_NETWORKING} = true ]] && [[ ${RUNLEVEL} != S ]] && \
713	echo -e ${COLMAGENTA}"Starting preliminary network ... "${COLDEFAULT}	${rc_base}/init.d/network stop
714	#dhcpcd &> /dev/null #&& echo "ok" || echo "false"
715		echo -e ${COLMAGENTA}"Starting preliminary networking ... "${COLDEFAULT}
716	# aka_fix ########################################
717	ifconfig eth0 128.20.222.222 netmask 255.255.0.0 up	# start network configured from /etc/conf.d
718	route del default gw 128.20.50.13 &> /dev/null	if [[ ${ALX_CONFD_NETWORKING} = true ]]
719	route add default gw 128.20.50.21 &> /dev/null	then
720	echo "nameserver 128.20.50.21" > /etc/resolv.conf	${rc_base}/init.d/network start
721	##################################################	else
722	evaluate_retval	echo -e ${COLOREDSTAR}"Starting default dhcp based networking ... "${COLDEFAULT}
723		# -t 10 timeout of 10 secs
724		dhcpcd -t 10 &> /dev/null
725		evaluate_retval
726		fi
727	;;	;;
728
729	stop)	stop)
730	echo -e ${COLMAGENTA}"Stopping preliminary network ... "${COLDEFAULT}	echo -e ${COLMAGENTA}"Stopping preliminary networking ... "${COLDEFAULT}
731	ifconfig eth0 down	if [[ ${ALX_CONFD_NETWORKING} = true ]]
732		then
733		${rc_base}/init.d/network stop
734		else
735		echo -e ${COLOREDSTAR}"Stopping default dhcp based networking ... "${COLDEFAULT}
736		ifconfig eth0 down
737		fi
738	if ps -A|grep dhcpcd > /dev/null	if ps -A|grep dhcpcd > /dev/null
739	then	then
	#echo -en ${COLMAGENTA}"Stopping preliminary network ... "${COLDEFAULT}
740	dhcpcd -z  &> /dev/null	dhcpcd -z  &> /dev/null
741		sleep 1
742	fi	fi
743	evaluate_retval	evaluate_retval
744	;;	;;
745
746	*)	*)
747	echo "Usage: preliminary_network {start|stop}"	echo "Usage: preliminary_network {start|stop}"
748	;;	;;
749	esac	esac
750	}	}
751
752		reset_system_settings()
753		{
754		# force load of de kbdkeys
755		loadkeys -q de
756		echo
757		echo -en ${COLRED}
758		echo -n "*** Warning: you are about to reset *all* local settings on this system!"
759		echo -e ${COLDEFAULT}
760		echo "*** Do you really want to continue ?"
761		echo -n "*** Enter 'yes' to continue, anything else to abort: "
762		read kbinsert
763		if [[ ${kbinsert} = yes ]]
764		then
765		echo -en ${COLRED}
766		echo -n "*** OK, you really want it ... killing all settings: "
767		for i in 3 2 1 now
768		do
769		echo -n " ${i}"
770		sleep 1
771		done
772		echo -e ${COLDEFAULT}
773
774		## reset all settings:
775		rm -rf ${SETTINGSPATH}/*
776		rm -f /etc/alxconfig-ng/serial
777		rm -rf /etc/alxconfig-ng/state
778
779		# clear all printers & net-shares
780		:> /etc/cups/printers.conf
781		:> /etc/samba/smb.conf
782
783		# remove inetd, cups & smb from init
784		rc-config del inetd &> /dev/null
785		rc-config del cups &> /dev/null
786		rc-config del samba &> /dev/null
787
788		# remove all user settings
789		[ -d ${ALX_UNPRIV_HOME} ] && rm -rf ${ALX_UNPRIV_HOME}
790
791		# remove all ica-sessions
792		find ${ALX_ICA_SESSIONS} -type f -name '*.ica' | xargs rm
793
794		# remove all old nics and modules configs
795		find /etc/conf.d -type f -name 'net.*' | xargs rm
796		find /etc/modules.d -type f -name 'net.*' | xargs rm
797
798		# restore default networking
799		cat ${ALX_SKELETONS}/net/net.eth0 > /etc/conf.d/net.eth0
800
801		echo "I am done now, press [Enter] to reboot system ..."
802		else
803		echo "Aborted, press [Enter] to reboot system ..."
804		fi
805		read
806		reboot
807		}
808
809		onboot_interface_list()
810		{
811		local file
812		local devices
813		local iface
814
815		# get list of all devices
816		for file in $@
817		do
818		if [[ $(read_value ONBOOT ${file}) = yes ]]
819		then
820		iface="$(basename ${file} | sed s/net.//)"
821		# exclude backup files
822		case "${iface}" in
823		*~) ;;
824		*) devices="${devices} $(basename ${file} | sed s/net.//)" ;;
825		esac
826		fi
827		done
828
829		echo "${devices}"
830		}
831
832		# read values from net.* files
833		read_value()
834		{
835		local var="$1"
836		local file="$2"
837		local value
838
839		# local all possible vars
840		# global
841		local ONBOOT
842		local NETWORKING
843
844		# static
845		local IP
846		local NETMASK
847		local BROADCAST
848		local NETWORKING
849		local FORCE_MAC_TO
850
851		# dhcp
852		local DHCP_PROG
853		local DHCP_START
854		local DHCP_STOP
855
856		# default gw
857		local GATEWAY
858		local GATEWAY_IF
859
860		# wireless extensions
861		local WIRELESS_AP
862		local WIRELESS_AUTH_MODE
863		local WIRELESS_BITRATE
864		local WIRELESS_CHANNEL
865		local WIRELESS_DEFAULT_KEY
866		local WIRELESS_ESSID
867		local WIRELESS_FREQUENCY
868		local WIRELESS_KEY
869		local WIRELESS_KEY_ASCII
870		local WIRELESS_KEY_0
871		local WIRELESS_KEY_1
872		local WIRELESS_KEY_2
873		local WIRELESS_KEY_3
874		local WIRELESS_KEY_LENGTH
875		local WIRELESS_MODE
876		local WIRELESS_NICK
877		local WIRELESS_NWID
878		local WIRELESS_POWER
879
880		source ${file}
881		eval value=\$$(echo ${var})
882		echo "${value}"
883		}
884
885	case $1 in	case $1 in
886	start)	start)
887	#retrieve or validate current serial	# check for global overrides
888		[ -f ${SETTINGSPATH}/confd-networking ] && ALX_CONFD_NETWORKING=true
889		[ -f /hardware-auto-detection ] && ALX_FORCED_RECHECK=true
890		read_cmdline hardware-auto-detection && ALX_FORCED_RECHECK=true
891		read_cmdline alx-reset-settings && ALX_RESET_SETTINGS=true
892
893		# kill all settings if requested
894		if [[ ${ALX_RESET_SETTINGS} = true ]]
895		then
896		reset_system_settings
897		fi
898
899		# retrieve or validate current serial
900	get_system_serial	get_system_serial
901	if [ "${ALX_HW_DETECT}" == "true" ]	if [[ ${ALX_HW_DETECT} = true ]]
902	then	then
903	import_settings_to_db	if [[ ${ALX_FORCED_RECHECK} = true ]]
904		then
905		update_settings_in_db
906		else
907		import_settings_to_db
908		fi
909	import_settings_local	import_settings_local
910
911		# here we should also exchange the ssh keys
912		# or the system cannot be rebooted after
913		# the first start via the alx-webadmin
914		config_ssh_auth
915	fi	fi
	#now setup system configuration
	#alx_setup_or_whatever_it_will_be_called()
	[ "${ALX_HW_DETECT}" == "false" ] && update_system_settings
916
917	#stop at last the preliminary networking (dhcp)	# now setup system configuration
918		# alx_setup_or_whatever_it_will_be_called()
919		[[ ${ALX_HW_DETECT} = false ]] && update_system_settings
920
921		# stop at last the preliminary networking (dhcp)
922	preliminary_network stop	preliminary_network stop
923	;;	;;
924
925	stop)	stop)
926	#unset_alx_connected #--> now in alxsetstate-rc6	# unset_alx_connected #--> now in alxsetstate-rc6
927	# ! important !: del systemstate	# ! important !: del systemstate
928	[ -f /etc/alx-config/state/state ] && rm /etc/alx-config/state/state	[ -f /etc/alxconfig-ng/state/state ] && rm /etc/alxconfig-ng/state/state
929	sleep 0.1	sleep 0.1
930	;;	;;
931	*)	*)
932	echo "Usage: $0 {start|stop} ..."	echo "Usage: $0 {start|stop} ..."
933	;;	;;
934	esac	esac
935

---

Colored Diff Long Colored Diff Full Colored Diff Unidiff Context Diff Side by Side

Legend: Removed from v.221   changed lines   Added in v.1715