Diff of /alx-src/branches/alxconf-060/init.d/alxsettings

Parent Directory | Revision Log | Patch

	alx-src/trunk/alxconfig-ng/init.d/alxsettings revision 221 by niro, Tue Mar 8 20:49:14 2005 UTC	alx-src/branches/alxconf-060/init.d/alxsettings revision 2039 by niro, Wed May 11 09:19:45 2011 UTC
#	Line 1	Line 1
1	#!/bin/bash	#!/bin/bash
2		# $Id$
3	# <niro@magellan-linux.de>	# <niro@magellan-linux.de>
4
5	#%rlevels: 7:s 0:k 6:k	#%rlevels: 7:s 0:k
6	#%start: 41	#%start: 41
7	#%stop: 01	#%stop: 01
8
#	Line 19	Line 19
19	# if no changes are at server side they will be kept, if yes the get updated.	# if no changes are at server side they will be kept, if yes the get updated.
20	# the server settings has higher priority.	# the server settings has higher priority.
21
22	#                       +-----+	source /etc/conf.d/rc
	#                       |start|
	#                       +-----+
	#                          |
	#                          |
	#              start_preliminary_network
	#                          |
	#                          |       n
	#                  serial_check ------->  get_new_serial
	#                          |                      |
	#                         y|                      |
	#                          |           n          |
	#                check_is_configured ---->  run_hw_detection
	#                          |                      |
	#                         y|                      |
	#            n             |                      |
	#        +--------cfg_equal_to_db          import_settings_to_db
	#        |                 |                      |
	#   update_from_db        y|                      |
	#        |                 |                      |
	#   set_is_configured      |                  set_is_configured
	#        +-----------------|                      |
	#                          +----------------------+
	#                          |
	#                          |
	#               stop_preliminary_network
	#                          |
	#                          |
	#                       +----+
	#                       |done|
	#                       +----+
	#                          |
	#                          |
	#                 normal_system_bootup
	#                          |
	#                          .
	#                          .
	#                          .
	#
	#
	#
	source /etc/sysconfig/rc
23	source $rc_functions	source $rc_functions
24
25	#mysql settings	# mysql settings
26	source /etc/alx-config/config.rc	source /etc/alxconfig-ng/config.rc
	source /opt/alx-config/functions/mysqlfunctions
	source /opt/alx-config/functions/alx-mysql-functions
27
28	#check if mysql is available	# helper functions
29	[ -x /usr/bin/mysql ] && MYSQL_ALX=true	source /usr/lib/alxconfig-ng/functions/common
30		source /usr/lib/alxconfig-ng/functions/mysqlfunctions
31		source /usr/lib/alxconfig-ng/functions/serial_functions
32		source /usr/lib/alxconfig-ng/functions/config_modules
33		source /usr/lib/alxconfig-ng/functions/config_network
34		source /usr/lib/alxconfig-ng/functions/config_printers
35		source /usr/lib/alxconfig-ng/functions/config_sessions
36		source /usr/lib/alxconfig-ng/functions/config_x11
37		source /usr/lib/alxconfig-ng/functions/config_auth
38		source /usr/lib/alxconfig-ng/functions/config_ssh_auth
39		source /usr/lib/alxconfig-ng/functions/config_versions
40
41	#other needed vars	# other needed vars
42	ALX_HW_DETECT=false	ALX_HW_DETECT=false
43	ALX_NETWORK_SETUP=false	ALX_FORCED_RECHECK=false
44	ALX_XSERVER_SETUP=false	ALX_RESET_SETTINGS=false
45	ALX_SESSION_SETUP=false	ALX_CONFD_NETWORKING=false
	ALX_PRINTER_SETUP=false
46
47	#unset vars which may kill us	# unset vars which may kill us
48	unset ALX_SERIAL ALX_STATE	unset ALX_SERIAL ALX_STATE
49
50
51	#setup needed directories	# setup needed directories
52	[ ! -d /etc/alx-config/state ] && install -d /etc/alx-config/state	[ ! -d /etc/alxconfig-ng/state ] && install -d /etc/alxconfig-ng/state
	# still a need to implement this ?
	# #needed to detect usb/livecd boot
	# if [ -e /.bootdev ]
	# then
	# source /.bootdev
	# else
	# echo "Couldn't find /.bootdev. Aborting."
	# exit 1
	# fi
	# still a need to implement this ? --> media-check ?
	settings_import() {
	if [ "${FSTYPE}" == "vfat" ]
	then
	if [ -e /mnt/cdrom/settings/system ]
	then
	echo -e ${COLOREDSTAR}"Importing old alx-settings ..."
	( cp -R /mnt/cdrom/settings/system/* /etc/alx-config/settings/menu &&
	source /etc/alx-config/config.rc &&
	source /opt/alx-config/Configurator/config_functions.sh &&
	setup_xfree > /dev/null 2>&1 &&
	setup_modules > /dev/null 2>&1 &&
	setup_network > /dev/null 2>&1 &&
	#setup_printers > /dev/null 2>&1 &&
	setup_sessions > /dev/null 2>&1 &&
	touch /etc/alx-config/imported )
	evaluate_retval
	fi
	fi
	}
	# this thingy needs an complete rewrite.
	# first get all settings from db server,
	# than check against local system settings,
	# if there are any differences, update the local settings,
	# as the server has a higher priority.
	# Important: write local settings only if they make sense,
	#            to have a fallback in case the server is down!
	#get_settings_from_server(){
	# #some needed arrays
	# #ARRAY_NETWORK #module domain networking netmask dns gateway
	# #SESSION #
	# #GRAFIK  #
	#
	# echo "Importing now old Settings ..."
	#
	# local serial module domain networking netmask dns gateway i x all
	#
	# declare -i i=0
	#
	# #get hostname from database
	# MY_HOSTNAME=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select hostname from cfg_serial where id='${ALX_SERIAL}'")
	#
	# #get network settings from database
	# all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select module,
	# domain,
	# networking,
	# netmask,
	# dns,
	# gateway,
	# broadcast,
	# ip
	# from cfg_network where serial='${ALX_SERIAL}'")
	# #split'em up and put in array
	# for x in ${all}
	# do
	# ARRAY_NETWORK[${i}]=${x}
	# ((i++))
	# done
	# echo " Network:"
	# echo "   MODULE:     ${ARRAY_NETWORK[0]}"
	# echo "   IP:         ${ARRAY_NETWORK[7]}"
	# echo "   HOSTNAME:   ${MY_HOSTNAME}"
	# echo "   DOMAIN:     ${ARRAY_NETWORK[1]}"
	# echo "   NETWORKING: ${ARRAY_NETWORK[2]}"
	# echo "   NETMASK:    ${ARRAY_NETWORK[3]}"
	# echo "   DNS:        ${ARRAY_NETWORK[4]}"
	# echo "   GATEWAY:    ${ARRAY_NETWORK[5]}"
	# echo "   BROADCAST:  ${ARRAY_NETWORK[6]}"
	# echo
	#
	# #get x settings from database
	# local module resolution
	#
	# #reset i
	# declare -i i=0
	# all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select module,
	# resolution
	# from cfg_grafik where serial='${ALX_SERIAL}'")
	# #split'em up and put in array
	# for x in ${all}
	# do
	# ARRAY_GRAFIK[${i}]=${x}
	# ((i++))
	# done
	#
	# echo " VGA:"
	# echo "   MODULE:     ${ARRAY_GRAFIK[0]}"
	# echo "   RESOLUTION: ${ARRAY_GRAFIK[1]}"
	# echo
	#
	# #get ica-sessions from database
	# ARRAY_SESSIONS=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select session from cfg_session where serial='${ALX_SERIAL}'")
	#
	# echo " SESSIONS:"
	# declare -i i=0
	# for x in ${ARRAY_SESSIONS}
	# do
	# ((i++))
	# echo "   SESSION${i}:   ${x}"
	# done
	# echo
	#
	# #now write these settings
	# local SETTINGSPATH
	#
	# #network
	#
	# #settings must be also set on system, so we put this to menu
	# SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	#
	# [ ! -d ${SETTINGSPATH}/modules ] && install -d ${SETTINGSPATH}/modules
	# echo "${ARRAY_NETWORK[0]}" > ${SETTINGSPATH}/modules/modules
	#
	# [ ! -d ${SETTINGSPATH}/network ] && install -d ${SETTINGSPATH}/network
	# echo "${MY_HOSTNAME}" > ${SETTINGSPATH}/network/hostname
	# echo "${ARRAY_NETWORK[1]}" > ${SETTINGSPATH}/network/domain
	# echo "${ARRAY_NETWORK[2]}" > ${SETTINGSPATH}/network/networking
	# [ -n "${ARRAY_NETWORK[3]}" ] && echo "${ARRAY_NETWORK[3]}" > ${SETTINGSPATH}/network/netmask
	# [ -n "${ARRAY_NETWORK[4]}" ] && echo "${ARRAY_NETWORK[4]}" > ${SETTINGSPATH}/network/dns
	# [ -n "${ARRAY_NETWORK[5]}" ] && echo "${ARRAY_NETWORK[5]}" > ${SETTINGSPATH}/network/gateway
	# [ -n "${ARRAY_NETWORK[6]}" ] && echo "${ARRAY_NETWORK[6]}" > ${SETTINGSPATH}/network/broadcast
	# [ -n "${ARRAY_NETWORK[7]}" ] && echo "${ARRAY_NETWORK[7]}" > ${SETTINGSPATH}/network/ip
53
54
55	validate_networking(){	# read_cmdline ${item}
56	#source /opt/alx-config/Configurator/config_functions.sh	read_cmdline()
57		{
58		local i
59
60	local x i all LOCAL_NETWORK DB_NETWORK SETTINGSPATH	for i in $(< /proc/cmdline)
	#all arrays:
	# ->  hostname modules domain networking ip netmask dns gateway broadcast
	#networking
	#get settings from local system
	SETTINGSPATH=${SETTINGS_TEMPLATE}/system
	declare -i i=0
	for x in network/hostname \
	modules/modules \
	network/domain \
	network/networking \
	network/ip \
	network/netmask \
	network/dns \
	network/gateway \
	network/broadcast
61	do	do
62	if [ -f ${SETTINGSPATH}/${x} ]	[[ ${i} = $1 ]] && return 0
	then
	#file exist, then use content
	LOCAL_NETWORK[${i}]="$(< ${SETTINGSPATH}/${x})"
	else
	LOCAL_NETWORK[${i}]=""
	fi
	((i++))
63	done	done
	#get settings from database
	# DB_NETWORK[0]=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select hostname from cfg_network where serial='${ALX_SERIAL}'")
	all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select hostname,
	module,
	domain,
	networking,
	ip,
	netmask,
	dns,
	gateway,
	broadcast
	from cfg_network where serial='${ALX_SERIAL}'")
	#split'em up and put in an array
	declare -i i=0
	for x in ${all}
	do
	DB_NETWORK[${i}]=${x}
	((i++))
	done
	#needed by the small hotfix
	local FIX_ME
	FIX_ME="${DB_NETWORK[2]}"
	#now compare this stuff if they are equal
	for ((i=0; i < 9; i++))
	do
	if [ "${DB_NETWORK[${i}]}" = "${LOCAL_NETWORK[${i}]}" ]
	then
	echo "${i}: ${DB_NETWORK[${i}]} == ${LOCAL_NETWORK[${i}]}"
	#delete equal stuff from DB_NETWORK
	DB_NETWORK[${i}]="*NULL*"
	else
	echo "${i}: ${DB_NETWORK[${i}]} != ${LOCAL_NETWORK[${i}]}"
	fi
	done
	#update configs
	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	declare -i i=0
	for x in network/hostname \
	modules/modules \
	network/domain \
	network/networking \
	network/ip \
	network/netmask \
	network/dns \
	network/gateway \
	network/broadcast
	do
	#update only staff wich wasn't overwritten
	if [ "${DB_NETWORK[${i}]}" != "*NULL*" ]
	then
	#create directory if not exist
	if [ ! -d $(dirname ${SETTINGSPATH}/${x}) ]
	then
	install -d $(dirname ${SETTINGSPATH}/${x})
	fi
	echo "${DB_NETWORK[${i}]}" > ${SETTINGSPATH}/${x}
	# theses fucking config functions:
	# network gets only updated,
	# if ${SETTINGS_TEMPLATE}/menu/network/networking exist
	# so we force an update here
	if [ ! -f ${SETTINGSPATH}/network/networking ]
	then
	[ ! -d ${SETTINGSPATH}/network ] && install -d ${SETTINGSPATH}/network
	echo "${FIX_ME}" > ${SETTINGSPATH}/network/networking
	fi
64
65	#set update flag	return 1
	ALX_NETWORK_SETUP=true
	fi
	((i++))
	done
66	}	}
67
68		update_system_settings()
69		{
70		echo -e ${COLMAGENTA}"Checking system setup ..."${COLDEFAULT}
71
72		# get the modules settings
73		# ! is the first thing that must be configured !
74		config_modules
75
76	validate_xserver(){	# imports network settings from db
77	#source /opt/alx-config/Configurator/config_functions.sh	config_networking
	local x i all LOCAL_XSERVER DB_XSERVER SETTINGSPATH
	#all arrays:
	# ->  xmodule resolution depth mouse monvendor monmodel hsync vref
78
79	#xserver	# imports x11 settings from db
80	#get settings from local system	config_x11
	#vga
	SETTINGSPATH=${SETTINGS_TEMPLATE}/system
	declare -i i=0
	for x in vga/vga \
	vga/vgares \
	vga/vgadepth
	do
	if [ -f ${SETTINGSPATH}/${x} ]
	then
	#file exist, then use content
	LOCAL_XSERVER[${i}]="$(< ${SETTINGSPATH}/${x})"
	else
	LOCAL_XSERVER[${i}]=""
	fi
	((i++))
	done
	#mouse
	if [ -f ${SETTINGSPATH}/mouse/mouse ]
	then
	#file exist, then use content
	LOCAL_XSERVER[3]="$(< ${SETTINGSPATH}/mouse/mouse)"
	else
	LOCAL_XSERVER[3]=""
	fi
	#monitor
	local myvendor mymodel hsync vref
	if [ -f ${SETTINGSPATH}/monitor/monitor ]
	then
	source ${SETTINGSPATH}/monitor/monitor
	declare -i i=4
	for x in "${myvendor}" \
	"${mymodel}" \
	"${hsync}" \
	"${vref}"
	do
	LOCAL_XSERVER[${i}]="${x}"
	((i++))
	done
	else
	LOCAL_XSERVER[4]=""
	LOCAL_XSERVER[5]=""
	LOCAL_XSERVER[6]=""
	LOCAL_XSERVER[7]=""
	fi
	#get settings from database
	all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select module,
	resolution,
	depth
	from cfg_graphic where serial='${ALX_SERIAL}'")
	#split'em up and put in an array
	declare -i i=0
	for x in ${all}
	do
	DB_XSERVER[${i}]=${x}
	((i++))
	done
	# read mouse
	DB_XSERVER[3]=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select mouse from cfg_input where serial='${ALX_SERIAL}'")
	#monitors
	# all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select vendor,
	# model,
	# hsync,
	# vrefresh
	# from cfg_monitor where serial='${ALX_SERIAL}'")
	all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select vendor,
	model,
	hsync,
	vrefresh
	from list_monitors
	inner join cfg_graphic
	on cfg_graphic.monitorid=list_monitors.id;")
	#split'em up and put in an array
	declare -i i=4
	for x in ${all}
	do
	DB_XSERVER[${i}]=${x}
	((i++))
	done
	# #now compare this stuff if they are equal
	# for ((i=0; i < 8; i++))
	# do
	# if [ "${DB_XSERVER[${i}]}" = "${LOCAL_XSERVER[${i}]}" ]
	# then
	# echo "${i}: ${DB_XSERVER[${i}]} == ${LOCAL_XSERVER[${i}]}"
	#
	# #delete equal stuff from DB_NETWORK
	# DB_XSERVER[${i}]="*NULL*"
	#
	# else
	# echo "${i}: ${DB_XSERVER[${i}]} != ${LOCAL_XSERVER[${i}]}"
	# fi
	# done
	#
	#
	# #update configs
	# SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	# #xserver general
	# declare -i i=0
	# for x in vga/vga \
	# vga/vgares \
	# vga/vgadepth \
	# mouse/mouse
	# do
	# #update only staff wich wasn't overwritten
	# if [ "${DB_XSERVER[${i}]}" != "*NULL*" ]
	# then
	# #create directory if not exist
	# if [ ! -d $(dirname ${SETTINGSPATH}/${x}) ]
	# then
	# install -d $(dirname ${SETTINGSPATH}/${x})
	# fi
	# echo "${DB_XSERVER[${i}]}" > ${SETTINGSPATH}/${x}
	# #set update flag
	# ALX_XSERVER_SETUP=true
	# fi
	# ((i++))
	# done
	#
	# #xserver monitors
	# if [ "${DB_XSERVER[4]}" != "*NULL*" \
	# -o "${DB_XSERVER[5]}" != "*NULL*" \
	# -o "${DB_XSERVER[6]}" != "*NULL*" \
	# -o "${DB_XSERVER[7]}" != "*NULL*" ]
	# then
	# if [ ! -d ${SETTINGSPATH}/monitor ]
	# then
	# install -d ${SETTINGSPATH}/monitor
	# fi
	# echo "myvendor=\"${DB_XSERVER[4]}\"" > ${SETTINGSPATH}/monitor/monitor
	# echo "mymodel=\"${DB_XSERVER[5]}\"" >> ${SETTINGSPATH}/monitor/monitor
	# echo "hsync=\"${DB_XSERVER[6]}\"" >> ${SETTINGSPATH}/monitor/monitor
	# echo "vref=\"${DB_XSERVER[7]}\"" >> ${SETTINGSPATH}/monitor/monitor
	#
	# #set update flag
	# ALX_XSERVER_SETUP=true
	# fi
	# - damn fucking setup_xfree routine need to rewrite this fucking stuff -
	# setup_xfree will only run
	# if ${SETTINGS_TEMPLATE}/menu/vga/vga exist
	# so we must *always* update *all* settings if something has changed
81
82	#now compare this stuff if they are equal	# imports session settings from db
83	for ((i=0; i < 8; i++))	config_sessions
	do
	if [ "${DB_XSERVER[${i}]}" = "${LOCAL_XSERVER[${i}]}" ]
	then
	echo "${i}: ${DB_XSERVER[${i}]} == ${LOCAL_XSERVER[${i}]}"
	#delete equal stuff from DB_NETWORK
	#DB_XSERVER[${i}]="*NULL*"
	else
	echo "${i}: ${DB_XSERVER[${i}]} != ${LOCAL_XSERVER[${i}]}"
	fi
	done
84
85	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu	# imports printer settings from db
86	if [ "${DB_XSERVER[0]}" != "*NULL*" \	config_printing
	-o "${DB_XSERVER[1]}" != "*NULL*" \
	-o "${DB_XSERVER[2]}" != "*NULL*" \
	-o "${DB_XSERVER[3]}" != "*NULL*" \
	-o "${DB_XSERVER[4]}" != "*NULL*" \
	-o "${DB_XSERVER[5]}" != "*NULL*" \
	-o "${DB_XSERVER[6]}" != "*NULL*" \
	-o "${DB_XSERVER[7]}" != "*NULL*" ]
	then
	[ ! -d ${SETTINGSPATH}/vga ] && install -d ${SETTINGSPATH}/vga
	[ ! -d ${SETTINGSPATH}/mouse ] && install -d ${SETTINGSPATH}/mouse
	[ ! -d ${SETTINGSPATH}/monitor ] && install -d ${SETTINGSPATH}/monitor
	echo "${DB_XSERVER[0]}" > ${SETTINGSPATH}/vga/vga
	echo "${DB_XSERVER[1]}" > ${SETTINGSPATH}/vga/vgares
	echo "${DB_XSERVER[2]}" > ${SETTINGSPATH}/vga/vgadepth
	echo "${DB_XSERVER[3]}" > ${SETTINGSPATH}/mouse/mouse
	echo "myvendor=\"${DB_XSERVER[4]}\"" > ${SETTINGSPATH}/monitor/monitor
	echo "mymodel=\"${DB_XSERVER[5]}\"" >> ${SETTINGSPATH}/monitor/monitor
	echo "hsync=\"${DB_XSERVER[6]}\"" >> ${SETTINGSPATH}/monitor/monitor
	echo "vref=\"${DB_XSERVER[7]}\"" >> ${SETTINGSPATH}/monitor/monitor
	#set update flag
	ALX_XSERVER_SETUP=true
	fi
	}
87
88		# imports auth settings from db
89		config_auth
90
91	validate_sessions(){	# exchange ssh rsa keys
92	#source /opt/alx-config/Configurator/config_functions.sh	HOME=/root config_ssh_auth
93
94	local x i all LOCAL_SESSIONS DB_SESSIONS SETTINGSPATH count	# import version info
95		config_version
	#all arrays:
	# ->  session1 session2 ... sessionN
	#no LOCAL_SESSIONS here, needs bubblesort
	#get settings from database
	all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select session from cfg_sessions where serial='${ALX_SERIAL}'")
	#split'em up and put in an array (only if $all not zero)
	declare -i i=0
	if [ -n "${all}" ]
	then
	for x in ${all}
	do
	DB_SESSIONS[${i}]=${x}
	((i++))
	done
	count=${i}
	else
	count=0
	fi
	## no compare here, can only done with bubblesort or s.th like that
	# shows only the new sessions
	declare -i i=0
	#count=${#DB_SESSIONS[*]} #---> not working gets always 1, why ?
	echo "Number of new sessions: ${count}"
	for ((i=0; i < count; i++))
	do
	echo "${i} - ${DB_SESSIONS[${i}]}"
	done
	#update local configs
	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	declare -i i=0
	#count=${#DB_SESSIONS[*]}
	if [ ${count} -gt 0 ]
	then
	#create directory if not exist
	[ ! -d ${SETTINGSPATH}/sessions ] && install -d ${SETTINGSPATH}/sessions
	#delete old sessions
	echo -n > ${SETTINGSPATH}/sessions/sessions
	for ((i=0; i < count; i++))
	do
	echo "${DB_SESSIONS[${i}]}" >> ${SETTINGSPATH}/sessions/sessions
	done
	#set update flag
	ALX_SESSION_SETUP=true
	fi
96	}	}
97
98		get_system_serial()
99		{
100		local CUR_IP CUR_MAC CUR_MTIME ALX_IFACE
101
102	validate_printing(){	if [[ ${ALX_CONFD_NETWORKING} = true ]]
	#source /opt/alx-config/Configurator/config_functions.sh
	local x i k all LOCAL_PRINTER DB_PRINTER SETTINGSPATH count
	#all arrays: [2 dimensions !]
	# ->  name1 name2 ... nameN
	# ->  name1 printingport ip share
	#later on, for now -> name1 port1 ip1 share1 name2 ....
	# seperator is 4
	#local PRINTERNAME PRINTING IP SHARE
	# update *always* printers from database;
	# compare with local settings cannot be done yet
	#get settings from database
	all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select printer_name,
	port,
	ip,
	share
	from cfg_printers where serial='${ALX_SERIAL}'")
	#split'em up and put in an array
	declare -i i=0
	declare -i k=0
	if [ -n "${all}" ]
103	then	then
104	for x in ${all}	ALX_IFACE="$(< ${SETTINGSPATH}/confd-networking)"
	do
	((k++))
	DB_PRINTER[${i}]="${DB_PRINTER[${i}]} ${x}"
	if [ ${k} -eq 4 ]
	then
	((i++))
	#reset $k
	declare -i k=0
	fi
	done
	count=${i}
105	else	else
106	count=0	ALX_IFACE="eth0"
	fi
	#echo settings
	echo "Number of new printers: ${count}"
	for ((i=0; i < count; i++))
	do
	echo "${i} printer:"
	for x in ${DB_PRINTER[${i}]}
	do
	echo "    ${x}"
	done
	done
	#import settings (only if counter > 0)
	local prnset
	#delete all printers (*always*)
	if [ -d ${SETTINGS_TEMPLATE}/system/printing ]
	then
	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	[ -d ${SETTINGSPATH}/delete ] && rm -rf ${SETTINGSPATH}/delete
	install -d ${SETTINGSPATH}/delete
	mv -f ${SETTINGS_TEMPLATE}/system/printing/* ${SETTINGSPATH}/delete
	rm -rf ${SETTINGS_TEMPLATE}/system/printing
	#set update flag (*always*)
	ALX_PRINTER_SETUP=true
107	fi	fi
	if [ ${count} -gt 0 ]
	then
	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	[ ! -d ${SETTINGSPATH}/printing ] && install -d ${SETTINGSPATH}/printing
	for ((i=0; i < count; i++))
	do
	declare -i k=0
	for x in ${DB_PRINTER[${i}]}
	do
	prnset[${k}]=${x}
	((k++))
	done
	echo "PRINTERNAME=${prnset[0]}" >  ${SETTINGSPATH}/printing/${prnset[0]}
	echo "PRINTING=${prnset[1]}" >> ${SETTINGSPATH}/printing/${prnset[0]}
	echo "IP=${prnset[2]}" >> ${SETTINGSPATH}/printing/${prnset[0]}
	echo "SHARE=${prnset[3]}" >> ${SETTINGSPATH}/printing/${prnset[0]}
	done
	#set update flag (*always*)
	ALX_PRINTER_SETUP=true
	fi
	}
108
109	update_system_settings(){	# check if serial file exists
110	source /opt/alx-config/Configurator/config_functions.sh	if [ -f /etc/alxconfig-ng/serial ] && [[ ${ALX_FORCED_RECHECK} = false ]]
	echo -e ${COLMAGENTA}"Checking system setup ..."${COLDEFAULT}
	echo
	echo "network"
	validate_networking
	echo
	echo "xserver"
	validate_xserver
	echo
	echo "sessions"
	validate_sessions
	echo
	#echo "printers"
	#validate_printing
	#echo
	if [ "${ALX_NETWORK_SETUP}" == "true" ]
	then
	echo -e ${COLMAGENTA}"Updating network settings"${COLDEFAULT}
	setup_modules
	setup_network
	fi
	if [ "${ALX_XSERVER_SETUP}" == "true" ]
111	then	then
112	echo -e ${COLMAGENTA}"Updating xserver settings"${COLDEFAULT}	source /etc/alxconfig-ng/serial
	setup_xfree
	fi
	if [ "${ALX_SESSION_SETUP}" == "true" ]
	then
	echo -e ${COLMAGENTA}"Updating session settings"${COLDEFAULT}
	setup_sessions
	fi
	#if [ "${ALX_PRINTER_SETUP}" == "true" ]
	#then
	# echo -e ${COLMAGENTA}"Updating printer settings"${COLDEFAULT}
	# setup_printers
	#fi
	#clean up temp files
	local SETTINGSPATH
	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	#[ -d ${SETTINGSPATH} ] && rm -rf ${SETTINGSPATH}
	}
113
114	get_system_serial(){	# start preliminary networking (dhcp)
115		preliminary_network start
116
117	local CUR_IP CUR_MAC CUR_MTIME	# check if mysql server is reachable
118		# if not abort this script
119		if ! reach_mysql_server
120		then
121		preliminary_network stop
122		exit 1
123		fi
124
125	#check if serial file exists	CUR_IP=$(ifconfig ${ALX_IFACE} | sed -n '/addr:/s/ [^r]*..//gp')
126	if [ -f /etc/alx-config/serial ]	CUR_MAC=$(ifconfig ${ALX_IFACE} | grep HWaddr | cut -d ' ' -f11)
	then
	source /etc/alx-config/serial
	# if system is already configured, it *has* a hostname.
	# so we take the hostname of this system here
	source /etc/hostname
	#start preliminary networking (dhcp)
	preliminary_network start
	CUR_IP=$(/sbin/ifconfig eth0 | sed -n '/addr:/s/ [^r]*..//gp')
	CUR_MAC=$(/sbin/ifconfig eth0 | grep HWaddr | cut -d ' ' -f11)
127	CUR_MTIME=$(date +%s)	CUR_MTIME=$(date +%s)
128
129	echo -e ${COLOREDSTAR} "Trying to validate my serial ..."	echo -e ${COLOREDSTAR} "Trying to validate my serial ..."
130
131	#nice serial output	# nice serial output
132	$CURS_UP	$CURS_UP
133	$SET_WCOL	$SET_WCOL
134	echo "[ SN: ${ALX_SERIAL} ]"	echo "[ SN: ${ALX_SERIAL} ]"
	# #is this system outdated ?
	# #MY_HOSTNAME=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# # "select hostname from cfg_serial where id='${ALX_SERIAL}'")
	#
	# #we do this now with the date instead of the hostname
	# local MY_ALX_REG_DATE
	# MY_ALX_REG_DATE=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select mtime from client_serial where serial='${ALX_SERIAL}'")
	#
	# #if [ "${MY_HOSTNAME}" == "${HOSTNAME}" ]
	# if [ "${MY_ALX_REG_DATE}" == "${ALX_REG_DATE}" ]
	# then
	# #set ALX_STATE to ok so everybody that everything was ok
	# ALX_STATE=ok
	#
	# evaluate_retval
	# else
	# #print false (works only if this is the first statement here)
	# evaluate_retval
	#
	# #set ALX_STATE to error so everybody sees there was an error
	# ALX_STATE=error
	# fi
135
136	if validate_serial "${ALX_SERIAL}" "${ALX_REG_DATE}" "${CUR_MAC}"	if validate_serial "${ALX_SERIAL}" "${ALX_REG_DATE}" "${CUR_MAC}"
137	then	then
138	ALX_STATE="ok"	ALX_STATE="ok"
139	else	else
140		# abort on non valid serial
141	ALX_STATE="invalid serial"	ALX_STATE="invalid serial"
142		echo "ALX_STATE=\"${ALX_STATE}\"" > /etc/alxconfig-ng/state/state
143		show_invalid_serial_msg
144		exit 1
145	fi	fi
146
147	else	else
148	#run hardware detection	# run hardware detection
149	echo	echo
150	echo -e ${COLMAGENTA}"Preparing system for first boot"${COLDEFAULT}	if [[ ${ALX_FORCED_RECHECK} = true ]]
151		then
152		echo -e ${COLMAGENTA}"Hardware autodetection forced by system-administrator"${COLDEFAULT}
153		# always disable CONFD_NETWORKING here
154		export ALX_CONFD_NETWORKING="false"
155		else
156		echo -e ${COLMAGENTA}"Preparing system for first boot"${COLDEFAULT}
157		fi
158	ALX_HW_DETECT=true	ALX_HW_DETECT=true
159	/etc/init.d/hwdetect start	hwsetup
160
161	#set hostname to alx_default_hostname	# set hostname to alx_default_hostname
162		# use old hostname if this is a forced re-check
163		[[ ${ALX_FORCED_RECHECK} = true ]] && ALX_DEFAULT_HOSTNAME="$(< /etc/hostname)"
164	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx
165	HOSTNAME="${ALX_DEFAULT_HOSTNAME}"	HOSTNAME="${ALX_DEFAULT_HOSTNAME}"
166
167	#update the hostname on the system for sure	# update the hostname on the system for sure
168	echo "HOSTNAME=${HOSTNAME}" > /etc/hostname	echo "${HOSTNAME}" > /etc/hostname
169
170	#start preliminary networking (dhcp)	# start preliminary networking (dhcp)
171	preliminary_network start	preliminary_network start
172
173		# check if mysql server is reachable
174		# if not abort this script
175		if ! reach_mysql_server
176		then
177		preliminary_network stop
178		exit 1
179		fi
180
181
182	CUR_IP=$(/sbin/ifconfig eth0 | sed -n '/addr:/s/ [^r]*..//gp')	CUR_IP=$(/sbin/ifconfig eth0 | sed -n '/addr:/s/ [^r]*..//gp')
183	CUR_MAC=$(/sbin/ifconfig eth0 | grep HWaddr | cut -d ' ' -f11)	CUR_MAC=$(/sbin/ifconfig eth0 | grep HWaddr | cut -d ' ' -f11)
184	CUR_MTIME=$(date +%s)	CUR_MTIME=$(date +%s)
185
186		# abort now if this is a forced re-check
187		if [[ ${ALX_FORCED_RECHECK} = true ]]
188		then
189		# but first check the serial
190		source /etc/alxconfig-ng/serial
191
192		echo -e ${COLOREDSTAR} "Trying to validate my serial ..."
193
194		# nice serial output
195		$CURS_UP
196		$SET_WCOL
197		echo "[ SN: ${ALX_SERIAL} ]"
198
199		if validate_serial "${ALX_SERIAL}" "${ALX_REG_DATE}" "${CUR_MAC}"
200		then
201		ALX_STATE="ok"
202		else
203		# abort on non valid serial
204		ALX_STATE="invalid serial"
205		echo "ALX_STATE=${ALX_STATE}" > /etc/alxconfig-ng/state/state
206		show_invalid_serial_msg
207		exit 1
208		fi
209
210		# write current state to temp file
211		echo "ALX_STATE=\"${ALX_STATE}\"" > /etc/alxconfig-ng/state/state
212		[ -f /hardware-auto-detection ] && rm /hardware-auto-detection
213
214		# now export ALX_FORCED_RECHECK=true
215		# that the setting will be updated not inserted !
216		export ALX_FORCED_RECHECK=true
217		return 0
218		fi
219
220	echo -e ${COLOREDSTAR} "Trying to get new serial ..."	echo -e ${COLOREDSTAR} "Trying to get new serial ..."
	#request new serial
	#ALX_REG_DATE="$(date +%F)"
	#we're using the mtime now (better for vaildating the serial)
	mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"insert into client_serials(
	mtime,
	mac
	)
	values(
	'${CUR_MTIME}',
	'${CUR_MAC}'
	);"
	#then validate and retrieve serial
	### warning must be changed that only the LAST ID will be fetched,  ###
	### or you get error if the computer name and date are the same     ###
	### you have more then one serial number than                       ###
	#not 100% working may get more than *one* id
	#ALX_SERIAL=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select id from cfg_serial where datum='${ALX_REG_DATE}' and hostname='${HOSTNAME}'")
	#select highest id only (added max)
	ALX_SERIAL=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select max(serial) from client_serials where mtime='${CUR_MTIME}' and mac='${CUR_MAC}'")
221
222	if [ "${ALX_SERIAL}" != NULL ]	# request a new serial; one command now (cause must be done in the same session)
223		ALX_SERIAL=$(mysqldo "insert into client_serials (mtime, mac) values('${CUR_MTIME}','${CUR_MAC}');
224		select last_insert_id();")
225
226		if [[ ${ALX_SERIAL} != NULL ]]
227	then	then
228	#nice serial output	# nice serial output
229	$CURS_UP	$CURS_UP
230	$SET_WCOL	$SET_WCOL
231	echo "[ SN: ${ALX_SERIAL} ]"	echo "[ SN: ${ALX_SERIAL} ]"
232
233	#set ALX_STATE to ok so everybody that everything was ok	# set ALX_STATE to ok so everybody knows that everything was ok
234	ALX_STATE=ok	ALX_STATE=ok
235
236	echo "ALX_SERIAL=${ALX_SERIAL}" > /etc/alx-config/serial	echo "ALX_SERIAL=\"${ALX_SERIAL}\"" > /etc/alxconfig-ng/serial
237	echo "ALX_REG_DATE=${CUR_MTIME}" >> /etc/alx-config/serial	echo "ALX_REG_DATE=\"${CUR_MTIME}\"" >> /etc/alxconfig-ng/serial
238
239	evaluate_retval	evaluate_retval
240	else	else
241	#print false (works only if this is the first statement here)	# print false (works only if this is the first statement here)
242	evaluate_retval	evaluate_retval
243
244	#set ALX_STATE to error so everybody sees there was an error	# set ALX_STATE to error so everybody sees there was an error
245	ALX_STATE=error	ALX_STATE=error
246
247	#show an error that no new serial was found	# show an error that no new serial was found
248	#nice serial output	# nice serial output
249	$CURS_UP	$CURS_UP
250	$SET_WCOL	$SET_WCOL
251	echo -e "[ SN: ${COLRED}None, 0${COLDEFAULT} ]"	echo -e "[ SN: ${COLRED}None, 0${COLDEFAULT} ]"
252	fi	fi
253	fi	fi
254
255	#write current state to temp file	# write current state to temp file
256	echo "ALX_STATE=${ALX_STATE}" > /etc/alx-config/state/state	echo "ALX_STATE=\"${ALX_STATE}\"" > /etc/alxconfig-ng/state/state
257		echo "ALX_IFACE=\"${ALX_IFACE}\"" >> /etc/alxconfig-ng/state/state
258	}	}
259
260
261	check_is_configured() {	check_is_configured()
262	if [ -f /etc/alx-config/state/configured ]	{
263		if [ -f /etc/alxconfig-ng/state/configured ]
264	then	then
265	export ALX_CONFIGURED=true	export ALX_CONFIGURED=true
266	else	else
#	Line 927  check_is_configured() {	Line 270  check_is_configured() {
270
271
272	# imports current settings to the database resolved by the hardware detection	# imports current settings to the database resolved by the hardware detection
273	import_settings_to_db() {	import_settings_to_db()
274	#note: networking is always 'dhcp' if hw was autodetected	{
275	#note: default_domain/hostname is set in config.rc	# note: networking is always 'dhcp' if hw was autodetected
276		# note: default_domain/hostname is set in config.rc
277	#to be safe, we do some sanity checks
278		# to be safe, we do some sanity checks
279	[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain	[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain
280	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx
281
282	#vars used by hwdetect	# vars used by hwsetup
283	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
284	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
285	local MOUSETYPE XMOUSETYPE FULLNAME DEVICE	local MOUSETYPE XMOUSETYPE FULLNAME DEVICE
286
287	#get setting from hwdetect	# get setting from hwsetup
288	source /etc/sysconfig/hwsetup/knoppix	source /etc/conf.d/hwsetup/knoppix
289	source /etc/sysconfig/hwsetup/mouse	source /etc/conf.d/hwsetup/mouse
290
291	echo	echo
292	echo -e ${COLMAGENTA}"Importing detected settings to database"${COLDEFAULT}	echo -e ${COLMAGENTA}"Importing detected settings to database"${COLDEFAULT}
293
294	#network	# network
295	echo -e "      Network settings ..."	echo -e "      Network settings ..."
296	mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \	if [[ ${ALX_CONFD_NETWORKING} = true ]]
297	"insert into cfg_network(	then
298	hostname,	# get settings
299	serial,	#source ${rc_base}/init.d/network &> /dev/null
300	module,	for iface in $(onboot_interface_list ${network_settings}/net.*)
301	domain,	do
302	networking	[[ $(< ${SETTINGSPATH}/confd-networking) != ${iface} ]] && continue
303	)	echo "WARNING: only importing settings for interface [ ${iface} ] !"
304	values(	source ${network_settings}/net.${iface} || exit 1
305	'${ALX_DEFAULT_HOSTNAME}',	NETCARD_DRIVER="$(cat /etc/modules.d/net.${iface} | cut -d' ' -f3)"
306	'${ALX_SERIAL}',
307	'${NETCARD_DRIVER}',	mysqldo "insert into cfg_network(
308	'${ALX_DEFAULT_DOMAIN}',	hostname,
309	'dhcp'	serial,
310	);"	module,
311		domain,
312		networking,
313		netmask,
314		dns,
315		gateway,
316		broadcast,
317		ip,
318		forcemacto,
319		wireless_bitrate,
320		wireless_channel,
321		wireless_essid,
322		wireless_frequency,
323		wireless_mode,
324		wireless_nick,
325		wireless_auth_mode,
326		wireless_key_length,
327		wireless_key,
328		wireless_key_ascii
329		)
330		values(
331		'${ALX_DEFAULT_HOSTNAME}',
332		'${ALX_SERIAL}',
333		'${NETCARD_DRIVER}',
334		'${ALX_DEFAULT_DOMAIN}',
335		'${NETWORKING}',
336		'${NETMASK}',
337		'${NAMESERVER}',
338		'${GATEWAY}',
339		'${BROADCAST}',
340		'${IP}',
341		'${FORCE_MAC_TO}',
342		'${WIRELESS_BITRATE}',
343		'${WIRELESS_CHANNEL}',
344		'${WIRELESS_ESSID}',
345		'${WIRELESS_FREQUENCY}',
346		'${WIRELESS_MODE}',
347		'${WIRELESS_NICK}',
348		'${WIRELESS_AUTH_MODE}',
349		'${WIRELESS_KEY_LENGTH}',
350		'${WIRELESS_KEY}',
351		'${WIRELESS_KEY_ASCII}'
352		);"
353
354		# only insert the *FIRST* iface
355		break
356		done
357		else
358		mysqldo "insert into cfg_network(
359		hostname,
360		serial,
361		module,
362		domain,
363		networking
364		)
365		values(
366		'${ALX_DEFAULT_HOSTNAME}',
367		'${ALX_SERIAL}',
368		'${NETCARD_DRIVER}',
369		'${ALX_DEFAULT_DOMAIN}',
370		'dhcp'
371		);"
372		fi
373	evaluate_retval	evaluate_retval
374
375	#xserver	# xserver
376	echo -e "      Graphic settings ..."	echo -e "      Graphic settings ..."
377	#xserver general	# xserver general
378	( mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \	( mysqldo "insert into cfg_graphic(
	"insert into cfg_graphic(
379	serial,	serial,
380	module,	module,
381	resolution,	resolution,
382	depth	depth,
383		refresh_rate
384	)	)
385	values(	values(
386	'${ALX_SERIAL}',	'${ALX_SERIAL}',
387	'${XMODULE}',	'${XMODULE}',
388	'1024x768',	'1024x768',
389	'16'	'16',
390	);";	'60'
391	#xserver monitor	);"; )
392	mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \	evaluate_retval
393	"insert into cfg_monitor(
394		# input
395		echo -e "      Input settings ..."
396		mysqldo "insert into cfg_input(serial,mouse) values('${ALX_SERIAL}','${XMOUSETYPE}');"
397		evaluate_retval
398
399		# auth
400		echo -e "      Authentification settings ..."
401		mysqldo "insert into client_auth(
402	serial,	serial,
403	vendor,	username,
404	model,	shell,
405	hsync,	vnc,
406	vrefresh	samba,
407		station
408	)	)
409	values(	values(
410	'${ALX_SERIAL}',	'${ALX_SERIAL}',
411	'Aamazing',	'${ALX_UNPRIV_USER}',
412	'CM-1528-FS',	'',
413	'28-64',	'',
414	'47-104'	'',
415	);";	''
416		);"
417	# input	evaluate_retval
418	mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
419	"insert into cfg_input(serial,mouse) values('${ALX_SERIAL}','${XMOUSETYPE}');";)	# exchange ssh rsa keys - the first boot needs this !
420		# or no reboot will work via the webadmin
421		echo -e "      SSH authentification settings ..."
422		HOME=/root config_ssh_auth
423		evaluate_retval
424
425		# autostart
426		echo -e "      Autostart settings ..."
427		mysqldo "insert into cfg_autostart(serial,session) values('${ALX_SERIAL}','');"
428
429		# screensaver
430		echo -e "      Screensaver settings ..."
431		mysqldo "insert into cfg_screensaver(serial,screensaver) values('${ALX_SERIAL}','')"
432
433		# version info
434		local alx_os
435		local alx_utils
436		alx_os="$(< /etc/mageversion)"
437		alx_utils="$(magequery -n alxconfig-ng-alx | sed 's:.*\[\ \(.*\)\ \].*:\1:')"
438		alx_utils="${alx_utils/alxconfig-ng-alx-}"
439		mysqldo "insert into client_version(serial,os,utils) values('${ALX_SERIAL}','${alx_os}','${alx_utils}')"
440
441	evaluate_retval	evaluate_retval
442	}	}
443
444	# imports current settings to the local system resolved by the hardware detection	# imports current settings to the database resolved by the hardware detection
445	import_settings_local(){	update_settings_in_db()
446	#note: networking is always 'dhcp' if hw was autodetected	{
447	#note: default_domain/hostname is set in config.rc	# note: networking is always 'dhcp' if hw was autodetected
448		# note: default_domain/hostname is set in config.rc or exported
449	#to be safe, we do some sanity checks	# note: we updating only hardware settings here !
450
451		# to be safe, we do some sanity checks
452	[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain	[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain
453	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx
454
455	#vars used by hwdetect	# vars used by hwsetup
456	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
457	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
458	local MOUSETYPE XMOUSETYPE FULLNAME DEVICE	local MOUSETYPE XMOUSETYPE FULLNAME DEVICE
459
460		# get setting from hwsetup
461	#get setting from hwdetect	source /etc/conf.d/hwsetup/knoppix
462	source /etc/sysconfig/hwsetup/knoppix	source /etc/conf.d/hwsetup/mouse
463	source /etc/sysconfig/hwsetup/mouse
464	echo	echo
465	echo -e ${COLMAGENTA}"Importing detected settings to local system"${COLDEFAULT}	echo -e ${COLMAGENTA}"Updating detected settings in database"${COLDEFAULT}
466
467		# network
	#allready configured, no update needed so we put it to system
	SETTINGSPATH=${SETTINGS_TEMPLATE}/system
	#network
468	echo -e "      Network settings ..."	echo -e "      Network settings ..."
469		if [[ ${ALX_CONFD_NETWORKING} = true ]]
470		then
471		# get settings
472		#source ${rc_base}/init.d/network &> /dev/null
473		for iface in $(onboot_interface_list ${network_settings}/net.*)
474		do
475		[[ $(< ${SETTINGSPATH}/confd-networking) != ${iface} ]] && continue
476		echo "WARNING: only importing settings for interface [ ${iface} ] !"
477		source ${network_settings}/net.${iface} || exit 1
478		NETCARD_DRIVER="$(cat /etc/modules.d/net.${iface} | cut -d' ' -f3)"
479
480		mysqldo "update cfg_network set
481		hostname='${ALX_DEFAULT_HOSTNAME}',
482		module='${NETCARD_DRIVER}',
483		domain='${ALX_DEFAULT_DOMAIN}',
484		networking='${NETWORKING}',
485		netmask='${NETMASK}',
486		dns='${NAMESERVER}',
487		gateway='${GATEWAY}',
488		broadcast='${BROADCAST}',
489		ip='${IP}',
490		forcemacto='${FORCE_MAC_TO}',
491		wireless_bitrate='${WIRELESS_BITRATE}',
492		wireless_channel='${WIRELESS_CHANNEL}',
493		wireless_essid='${WIRELESS_ESSID}',
494		wireless_frequency='${WIRELESS_FREQUENCY}',
495		wireless_mode='${WIRELESS_MODE}',
496		wireless_nick='${WIRELESS_NICK}',
497		wireless_auth_mode='${WIRELESS_AUTH_MODE}',
498		wireless_key_length='${WIRELESS_KEY_LENGTH}',
499		wireless_key='${WIRELESS_KEY}',
500		wireless_key_ascii='${WIRELESS_KEY_ASCII}'
501		where serial=${ALX_SERIAL};"
502
503	[ ! -d ${SETTINGSPATH}/modules ] && install -d ${SETTINGSPATH}/modules	# only insert the *FIRST* iface
504	echo "${NETCARD_DRIVER}" > ${SETTINGSPATH}/modules/modules	break
505		done
506	[ ! -d ${SETTINGSPATH}/network ] && install -d ${SETTINGSPATH}/network	else
507	( echo "${ALX_DEFAULT_HOSTNAME}" > ${SETTINGSPATH}/network/hostname;	mysqldo "update cfg_network set
508	echo "${ALX_DEFAULT_DOMAIN}" > ${SETTINGSPATH}/network/domain;	hostname='${ALX_DEFAULT_HOSTNAME}',
509	echo "dhcp" > ${SETTINGSPATH}/network/networking )	module='${NETCARD_DRIVER}',
510		domain='${ALX_DEFAULT_DOMAIN}',
511		networking='dhcp'
512		where serial=${ALX_SERIAL};"
513		fi
514	evaluate_retval	evaluate_retval
515
516		# xserver
	#xserver
517	echo -e "      Graphic settings ..."	echo -e "      Graphic settings ..."
518		# xserver general
519	[ ! -d ${SETTINGSPATH}/vga ] && install -d ${SETTINGSPATH}/vga	mysqldo "update cfg_graphic set
520	[ ! -d ${SETTINGSPATH}/mouse ] && install -d ${SETTINGSPATH}/mouse	module='${XMODULE}',
521	[ ! -d ${SETTINGSPATH}/monitor ] && install -d ${SETTINGSPATH}/monitor	resolution='1024x768',
522	( echo "${XMODULE}" > ${SETTINGSPATH}/vga/vga;	depth='16',
523	echo "16" > ${SETTINGSPATH}/vga/vgadepth;	refresh_rate='60'
524	echo "1024x768" > ${SETTINGSPATH}/vga/vgares;	where serial=${ALX_SERIAL};"
	echo "${XMOUSETYPE}" > ${SETTINGSPATH}/mouse/mouse;
	echo "myvendor=\"Aamazing\"" > ${SETTINGSPATH}/monitor/monitor;
	echo "mymodel=\"CM-1528-FS\"" >> ${SETTINGSPATH}/monitor/monitor;
	echo "hsync=\"28-64\"" >> ${SETTINGSPATH}/monitor/monitor;
	echo "vref=\"47-104\"" >> ${SETTINGSPATH}/monitor/monitor;)
525	evaluate_retval	evaluate_retval
526
527	#set system state to 'already configured'	# input
528	touch /etc/alx-config/state/configured	echo -e "      Input settings ..."
529		mysqldo "update cfg_input set mouse='${XMOUSETYPE}' where serial=${ALX_SERIAL};"
530		evaluate_retval
531
532		# version info
533		local alx_os
534		local alx_utils
535		alx_os="$(< /etc/mageversion)"
536		alx_utils="$(magequery -n alxconfig-ng-alx | sed 's:.*\[\ \(.*\)\ \].*:\1:')"
537		alx_utils="${alx_utils/alxconfig-ng-alx-}"
538		mysqldo "update client_version set os='${alx_os}', utils='${alx_utils}' where serial=${ALX_SERIAL};"
539	}	}
540
541	#start|stop	# imports current settings to the local system resolved by the hardware detection
542	preliminary_network(){	# we only need the network settings
543		import_settings_local()
544		{
545		# note: networking is always 'dhcp' if hw was autodetected
546		# note: default_domain/hostname is set in config.rc
547
548		# to be safe, we do some sanity checks
549		[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain
550		[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx
551
552		# vars used by hwsetup
553		local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
554		local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
555		local MOUSETYPE XMOUSETYPE FULLNAME DEVICE
556
557		# get setting from hwsetup
558		source /etc/conf.d/hwsetup/knoppix
559
560		echo
561		echo -e ${COLMAGENTA}"Importing detected settings to local system"${COLDEFAULT}
562
563		if [[ ${ALX_CONFD_NETWORKING} = false ]]
564		then
565		# set an device alias for modprobe.conf
566		[ ! -d /etc/modprobe.d ] && install -d /etc/modprobe.d
567		echo "alias eth0 ${NETCARD_DRIVER}" > /etc/modprobe.d/net.eth0.conf
568
569		# regenerate modprobe.conf
570		[ -x $(which modules-update) ] && modules-update || echo "cannot regen modprobe.conf"
571		evaluate_retval
572		fi
573
574		# set system state to 'already configured'
575		touch /etc/alxconfig-ng/state/configured
576
577		# install slim desktopmanager configuration
578		config_display_manager
579
580		# if only an recheck was forced than abort now
581		[[ ${ALX_FORCED_RECHECK} = true ]] && return 0
582
583		# create a fresh fluxbox directory
584		[ -d ${ALX_UNPRIV_HOME}/.fluxbox ] && rm -rf ${ALX_UNPRIV_HOME}/.fluxbox
585		install -d ${ALX_UNPRIV_HOME}/.fluxbox
586
587		# now generate fluxbox config files
588
589		# fluxbox main config
590		cat ${ALX_SKELETONS}/fluxbox/init > ${ALX_UNPRIV_HOME}/.fluxbox/init
591
592		# fluxbox autostart
593		cat ${ALX_SKELETONS}/fluxbox/apps > ${ALX_UNPRIV_HOME}/.fluxbox/apps
594
595		# fluxbox menu header
596		cat ${ALX_SKELETONS}/fluxbox/menu.header > ${ALX_UNPRIV_HOME}/.fluxbox/menu
597
598		# now fix it with proper messages :P
599		local ver="$(< /etc/mageversion)"
600		sed -i "s:@CHANGEME@:alx-${ver}  #${ALX_SERIAL}:g" ${ALX_UNPRIV_HOME}/.fluxbox/menu
601
602		# add a newline (maybe there is no crlf in the header)
603		echo >> ${ALX_UNPRIV_HOME}/.fluxbox/menu
604
605		# fluxbox menu footer
606		cat ${ALX_SKELETONS}/fluxbox/menu.footer >> ${ALX_UNPRIV_HOME}/.fluxbox/menu
607
608		# add a newline (maybe there is no crlf in the footer)
609		echo >> ${ALX_UNPRIV_HOME}/.fluxbox/menu
610
611
612		# setup some standart icons (sysinfo.lnk)
613		# basic config
614		cat ${ALX_SKELETONS}/xtdesktop/xtdeskrc > ${ALX_UNPRIV_HOME}/.xtdeskrc
615
616		# clean desktop icon location
617		[ -d ${ALX_UNPRIV_HOME}/.xtdesktop ] && rm -rf ${ALX_UNPRIV_HOME}/.xtdesktop
618		install -d ${ALX_UNPRIV_HOME}/.xtdesktop
619
620		# last but not least gen a icon with some sys informations
621		local sysinfo
622		local osversion
623		local xres
624		local yres
625
626		osversion="$(< /etc/mageversion)"
627		sysinfo="Hostname: ${ALX_DEFAULT_HOSTNAME} Serial: #${ALX_SERIAL} OS: alx-${osversion} Kernel: $(uname -r)"
628
629		# at first boot we got always a resolution of 1024x768-16@60
630		# middle of the screen
631		# (no txt - length required, xtdesk manage that itself)
632		xres="$((1024 / 2))"
633		# default y pos (full yres -22 !)
634		yres="$((768 - 22 ))"
635
636		generate_icon \
637		--name "${sysinfo}" \
638		--command "exit 0" \
639		--icon "${ALX_SESSIONS_ICONS}/sysinfo.png" \
640		--dest "${ALX_UNPRIV_HOME}/.xtdesktop/sysinfo.lnk" \
641		--xres "${xres}" \
642		--yres "${yres}" \
643		--icon-width "1" \
644		--icon-height "1"
645
646		# create a xinitrc
647		echo "exec startfluxbox" > ${ALX_UNPRIV_HOME}/.xinitrc
648
649		# set correct permissions
650		chown ${ALX_UNPRIV_USER}:${ALX_UNPRIV_GROUP} ${ALX_UNPRIV_HOME}
651		chown ${ALX_UNPRIV_USER}:${ALX_UNPRIV_GROUP} ${ALX_UNPRIV_HOME}/.fluxbox
652		chmod 0755 ${ALX_UNPRIV_HOME}/.fluxbox
653		chmod 0755 ${ALX_UNPRIV_HOME}/.xtdesktop
654		chmod 0644 ${ALX_UNPRIV_HOME}/.xtdeskrc
655		chmod 0644 ${ALX_UNPRIV_HOME}/.xinitrc
656		}
657
658		# start|stop
659		preliminary_network()
660		{
661	local module	local module
662
663	if [ -f /etc/alx-config/state/configured ]	if [ -f /etc/alxconfig-ng/state/configured ]
664	then	then
665	#get module name	# compat for old clients
666	module=$(cat ${SETTINGS_TEMPLATE}/system/modules/modules)	if [ -f ${SETTINGSPATH}/modules ]
667	modprobe ${module}	then
668		# get module name
669		module=$(cat ${SETTINGSPATH}/modules)
670		modprobe ${module}
671		fi
672
673	else	else
674	#vars used by hwdetect	# vars used by hwsetup
675	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
676	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
677
678	#get setting from hwdetect	# get setting from hwsetup
679	source /etc/sysconfig/hwsetup/knoppix	source /etc/conf.d/hwsetup/knoppix
680	modprobe ${NETCARD_DRIVER}	modprobe ${NETCARD_DRIVER}
681	fi	fi
682
683	case $1 in	case $1 in
684	start)	start)
685	# keeping like always safe:	# keeping like always safe:
686	# no network should be startet here,	# no network should be startet here,
687	# so we can delete all pid files if one exists	# so we can delete all pid files if one exists
688	if ps -A|grep dhcpcd > /dev/null	if [[ ! -z $(pidof udhcpc) ]]
689	then	then
690	echo -e ${COLMAGENTA}"Forcing network down"${COLDEFAULT}	echo -e ${COLMAGENTA}"Forcing network down"${COLDEFAULT}
691	dhcpcd -k	killall udhcpc &> /dev/null
692	sleep 1	sleep 1
693		fi
694		[[ ${ALX_CONFD_NETWORKING} = true ]] && ${rc_base}/init.d/network stop
695
696		echo -e ${COLMAGENTA}"Starting preliminary networking ... "${COLDEFAULT}
697
698		# start network configured from /etc/conf.d
699		if [[ ${ALX_CONFD_NETWORKING} = true ]]
700		then
701		${rc_base}/init.d/network start
702	else	else
703	rm -f /var/run/dhcpcd-eth?.pid	echo -e ${COLOREDSTAR}"Starting default dhcp based networking ... "${COLDEFAULT}
704		# -t 10 timeout of 10 secs
705		udhcpc -t 10 &> /dev/null
706		evaluate_retval
707	fi	fi
	echo -e ${COLMAGENTA}"Starting preliminary network ... "${COLDEFAULT}
	#dhcpcd &> /dev/null #&& echo "ok" || echo "false"
	# aka_fix ########################################
	ifconfig eth0 128.20.222.222 netmask 255.255.0.0 up
	route del default gw 128.20.50.13 &> /dev/null
	route add default gw 128.20.50.21 &> /dev/null
	echo "nameserver 128.20.50.21" > /etc/resolv.conf
	##################################################
	evaluate_retval
708	;;	;;
709
710	stop)	stop)
711	echo -e ${COLMAGENTA}"Stopping preliminary network ... "${COLDEFAULT}	echo -e ${COLMAGENTA}"Stopping preliminary networking ... "${COLDEFAULT}
712	ifconfig eth0 down	if [[ ${ALX_CONFD_NETWORKING} = true ]]
713	if ps -A|grep dhcpcd > /dev/null	then
714		${rc_base}/init.d/network stop
715		else
716		echo -e ${COLOREDSTAR}"Stopping default dhcp based networking ... "${COLDEFAULT}
717		ifconfig eth0 down
718		fi
719		if [[ ! -z $(pidof udhcpc) ]]
720	then	then
721	#echo -en ${COLMAGENTA}"Stopping preliminary network ... "${COLDEFAULT}	killall udhcpc  &> /dev/null
722	dhcpcd -z  &> /dev/null	sleep 1
723	fi	fi
724	evaluate_retval	evaluate_retval
725	;;	;;
726
727	*)	*)
728	echo "Usage: preliminary_network {start|stop}"	echo "Usage: preliminary_network {start|stop}"
729	;;	;;
730	esac	esac
731	}	}
732
733		reset_system_settings()
734		{
735		# force load of de kbdkeys
736		loadkeys -q de
737		echo
738		echo -en ${COLRED}
739		echo -n "*** Warning: you are about to reset *all* local settings on this system!"
740		echo -e ${COLDEFAULT}
741		echo "*** Do you really want to continue ?"
742		echo -n "*** Enter 'yes' to continue, anything else to abort: "
743		read kbinsert
744		if [[ ${kbinsert} = yes ]]
745		then
746		echo -en ${COLRED}
747		echo -n "*** OK, you really want it ... killing all settings: "
748		for i in 3 2 1 now
749		do
750		echo -n " ${i}"
751		sleep 1
752		done
753		echo -e ${COLDEFAULT}
754
755		## reset all settings:
756		rm -rf ${SETTINGSPATH}/*
757		rm -f /etc/alxconfig-ng/serial
758		rm -rf /etc/alxconfig-ng/state
759
760		# clear all printers & net-shares
761		:> /etc/cups/printers.conf
762		:> /etc/samba/smb.conf
763
764		# remove inetd, cups & smb from init
765		rc-config del inetd &> /dev/null
766		rc-config del cups &> /dev/null
767		rc-config del samba &> /dev/null
768
769		# remove all user settings
770		[ -d ${ALX_UNPRIV_HOME} ] && rm -rf ${ALX_UNPRIV_HOME}
771
772		# remove all ica-sessions
773		find ${ALX_ICA_SESSIONS} -type f -name '*.ica' | xargs rm
774
775		# remove all old nics and modules configs
776		find /etc/conf.d -type f -name 'net.*' | xargs rm
777		find /etc/modules.d -type f -name 'net.*' | xargs rm
778
779		# restore default networking
780		cat ${ALX_SKELETONS}/net/net.eth0 > /etc/conf.d/net.eth0
781
782		echo "I am done now, press [Enter] to reboot system ..."
783		else
784		echo "Aborted, press [Enter] to reboot system ..."
785		fi
786		read
787		reboot
788		}
789
790		onboot_interface_list()
791		{
792		local file
793		local devices
794		local iface
795
796		# get list of all devices
797		for file in $@
798		do
799		if [[ $(read_value ONBOOT ${file}) = yes ]]
800		then
801		iface="$(basename ${file} | sed s/net.//)"
802		# exclude backup files
803		case "${iface}" in
804		*~) ;;
805		*) devices="${devices} $(basename ${file} | sed s/net.//)" ;;
806		esac
807		fi
808		done
809
810		echo "${devices}"
811		}
812
813		# read values from net.* files
814		read_value()
815		{
816		local var="$1"
817		local file="$2"
818		local value
819
820		# local all possible vars
821		# global
822		local ONBOOT
823		local NETWORKING
824
825		# static
826		local IP
827		local NETMASK
828		local BROADCAST
829		local NETWORKING
830		local FORCE_MAC_TO
831
832		# dhcp
833		local DHCP_PROG
834		local DHCP_START
835		local DHCP_STOP
836
837		# default gw
838		local GATEWAY
839		local GATEWAY_IF
840
841		# wireless extensions
842		local WIRELESS_AP
843		local WIRELESS_AUTH_MODE
844		local WIRELESS_BITRATE
845		local WIRELESS_CHANNEL
846		local WIRELESS_DEFAULT_KEY
847		local WIRELESS_ESSID
848		local WIRELESS_FREQUENCY
849		local WIRELESS_KEY
850		local WIRELESS_KEY_ASCII
851		local WIRELESS_KEY_0
852		local WIRELESS_KEY_1
853		local WIRELESS_KEY_2
854		local WIRELESS_KEY_3
855		local WIRELESS_KEY_LENGTH
856		local WIRELESS_MODE
857		local WIRELESS_NICK
858		local WIRELESS_NWID
859		local WIRELESS_POWER
860
861		source ${file}
862		eval value=\$$(echo ${var})
863		echo "${value}"
864		}
865
866	case $1 in	case $1 in
867	start)	start)
868	#retrieve or validate current serial	# check for global overrides
869		[ -f ${SETTINGSPATH}/confd-networking ] && ALX_CONFD_NETWORKING=true
870		[ -f /hardware-auto-detection ] && ALX_FORCED_RECHECK=true
871		read_cmdline hardware-auto-detection && ALX_FORCED_RECHECK=true
872		read_cmdline alx-reset-settings && ALX_RESET_SETTINGS=true
873
874		# kill all settings if requested
875		if [[ ${ALX_RESET_SETTINGS} = true ]]
876		then
877		reset_system_settings
878		fi
879
880		# retrieve or validate current serial
881	get_system_serial	get_system_serial
882	if [ "${ALX_HW_DETECT}" == "true" ]	if [[ ${ALX_HW_DETECT} = true ]]
883	then	then
884	import_settings_to_db	if [[ ${ALX_FORCED_RECHECK} = true ]]
885		then
886		update_settings_in_db
887		else
888		import_settings_to_db
889		fi
890	import_settings_local	import_settings_local
891
892		# here we should also exchange the ssh keys
893		# or the system cannot be rebooted after
894		# the first start via the alx-webadmin
895		config_ssh_auth
896	fi	fi
	#now setup system configuration
	#alx_setup_or_whatever_it_will_be_called()
	[ "${ALX_HW_DETECT}" == "false" ] && update_system_settings
897
898	#stop at last the preliminary networking (dhcp)	# now setup system configuration
899		# alx_setup_or_whatever_it_will_be_called()
900		[[ ${ALX_HW_DETECT} = false ]] && update_system_settings
901
902		# stop at last the preliminary networking (dhcp)
903	preliminary_network stop	preliminary_network stop
904	;;	;;
905
906	stop)	stop)
907	#unset_alx_connected #--> now in alxsetstate-rc6	# unset_alx_connected #--> now in alxsetstate-rc6
908	# ! important !: del systemstate	# ! important !: del systemstate
909	[ -f /etc/alx-config/state/state ] && rm /etc/alx-config/state/state	[ -f /etc/alxconfig-ng/state/state ] && rm /etc/alxconfig-ng/state/state
910	sleep 0.1	sleep 0.1
911	;;	;;
912
913	*)	*)
914	echo "Usage: $0 {start|stop} ..."	echo "Usage: $0 {start|stop} ..."
915	;;	;;
916	esac	esac
917

---

Colored Diff Long Colored Diff Full Colored Diff Unidiff Context Diff Side by Side

Legend: Removed from v.221   changed lines   Added in v.2039