Diff of /alx-src/branches/alxconf-060/init.d/alxsettings

Parent Directory | Revision Log | Patch

	revision 221 by niro, Tue Mar 8 20:49:14 2005 UTC	revision 368 by niro, Tue Oct 11 12:10:15 2005 UTC
#	Line 11	Line 11
11	#%before:	#%before:
12	#%after:	#%after:
13
14		# $Header: /home/cvsd/alx-cvs/alx-src/alxconfig-ng/init.d/alxsettings,v 1.27 2005-10-11 12:10:15 niro Exp $
15
16	# checks first if the client was already configured and if it has an valid serial	# checks first if the client was already configured and if it has an valid serial
17	# if not it runs the autoconfiguration script	# if not it runs the autoconfiguration script
18	# these settings will be used for client setup	# these settings will be used for client setup
#	Line 19	Line 21
21	# if no changes are at server side they will be kept, if yes the get updated.	# if no changes are at server side they will be kept, if yes the get updated.
22	# the server settings has higher priority.	# the server settings has higher priority.
23
	#                       +-----+
	#                       |start|
	#                       +-----+
	#                          |
	#                          |
	#              start_preliminary_network
	#                          |
	#                          |       n
	#                  serial_check ------->  get_new_serial
	#                          |                      |
	#                         y|                      |
	#                          |           n          |
	#                check_is_configured ---->  run_hw_detection
	#                          |                      |
	#                         y|                      |
	#            n             |                      |
	#        +--------cfg_equal_to_db          import_settings_to_db
	#        |                 |                      |
	#   update_from_db        y|                      |
	#        |                 |                      |
	#   set_is_configured      |                  set_is_configured
	#        +-----------------|                      |
	#                          +----------------------+
	#                          |
	#                          |
	#               stop_preliminary_network
	#                          |
	#                          |
	#                       +----+
	#                       |done|
	#                       +----+
	#                          |
	#                          |
	#                 normal_system_bootup
	#                          |
	#                          .
	#                          .
	#                          .
	#
	#
	#
24	source /etc/sysconfig/rc	source /etc/sysconfig/rc
25	source $rc_functions	source $rc_functions
26
27	#mysql settings	# mysql settings
28	source /etc/alx-config/config.rc	source /etc/alxconfig-ng/config.rc
29	source /opt/alx-config/functions/mysqlfunctions
30	source /opt/alx-config/functions/alx-mysql-functions	# helper functions
31		source /usr/lib/alxconfig-ng/functions/mysqlfunctions
32		source /usr/lib/alxconfig-ng/functions/serial_functions
33		source /usr/lib/alxconfig-ng/functions/config_modules
34		source /usr/lib/alxconfig-ng/functions/config_network
35		source /usr/lib/alxconfig-ng/functions/config_printers
36		source /usr/lib/alxconfig-ng/functions/config_sessions
37		source /usr/lib/alxconfig-ng/functions/config_x11
38		source /usr/lib/alxconfig-ng/functions/config_auth
39		source /usr/lib/alxconfig-ng/functions/config_ssh_auth
40
41	#check if mysql is available	# check if mysql is available
42	[ -x /usr/bin/mysql ] && MYSQL_ALX=true	[ -x /usr/bin/mysql ] && MYSQL_ALX=true
43
44	#other needed vars	# other needed vars
45	ALX_HW_DETECT=false	ALX_HW_DETECT=false
46	ALX_NETWORK_SETUP=false	ALX_FORCED_RECHECK=false
47	ALX_XSERVER_SETUP=false	ALX_RESET_SETTINGS=false
48	ALX_SESSION_SETUP=false	ALX_CONFD_NETWORKING=false
	ALX_PRINTER_SETUP=false
49
50	#unset vars which may kill us	# unset vars which may kill us
51	unset ALX_SERIAL ALX_STATE	unset ALX_SERIAL ALX_STATE
52
53
54	#setup needed directories	# setup needed directories
55	[ ! -d /etc/alx-config/state ] && install -d /etc/alx-config/state	[ ! -d /etc/alxconfig-ng/state ] && install -d /etc/alxconfig-ng/state
	# still a need to implement this ?
	# #needed to detect usb/livecd boot
	# if [ -e /.bootdev ]
	# then
	# source /.bootdev
	# else
	# echo "Couldn't find /.bootdev. Aborting."
	# exit 1
	# fi
	# still a need to implement this ? --> media-check ?
	settings_import() {
	if [ "${FSTYPE}" == "vfat" ]
	then
	if [ -e /mnt/cdrom/settings/system ]
	then
	echo -e ${COLOREDSTAR}"Importing old alx-settings ..."
	( cp -R /mnt/cdrom/settings/system/* /etc/alx-config/settings/menu &&
	source /etc/alx-config/config.rc &&
	source /opt/alx-config/Configurator/config_functions.sh &&
	setup_xfree > /dev/null 2>&1 &&
	setup_modules > /dev/null 2>&1 &&
	setup_network > /dev/null 2>&1 &&
	#setup_printers > /dev/null 2>&1 &&
	setup_sessions > /dev/null 2>&1 &&
	touch /etc/alx-config/imported )
	evaluate_retval
	fi
	fi
	}
	# this thingy needs an complete rewrite.
	# first get all settings from db server,
	# than check against local system settings,
	# if there are any differences, update the local settings,
	# as the server has a higher priority.
	# Important: write local settings only if they make sense,
	#            to have a fallback in case the server is down!
	#get_settings_from_server(){
	# #some needed arrays
	# #ARRAY_NETWORK #module domain networking netmask dns gateway
	# #SESSION #
	# #GRAFIK  #
	#
	# echo "Importing now old Settings ..."
	#
	# local serial module domain networking netmask dns gateway i x all
	#
	# declare -i i=0
	#
	# #get hostname from database
	# MY_HOSTNAME=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select hostname from cfg_serial where id='${ALX_SERIAL}'")
	#
	# #get network settings from database
	# all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select module,
	# domain,
	# networking,
	# netmask,
	# dns,
	# gateway,
	# broadcast,
	# ip
	# from cfg_network where serial='${ALX_SERIAL}'")
	# #split'em up and put in array
	# for x in ${all}
	# do
	# ARRAY_NETWORK[${i}]=${x}
	# ((i++))
	# done
	# echo " Network:"
	# echo "   MODULE:     ${ARRAY_NETWORK[0]}"
	# echo "   IP:         ${ARRAY_NETWORK[7]}"
	# echo "   HOSTNAME:   ${MY_HOSTNAME}"
	# echo "   DOMAIN:     ${ARRAY_NETWORK[1]}"
	# echo "   NETWORKING: ${ARRAY_NETWORK[2]}"
	# echo "   NETMASK:    ${ARRAY_NETWORK[3]}"
	# echo "   DNS:        ${ARRAY_NETWORK[4]}"
	# echo "   GATEWAY:    ${ARRAY_NETWORK[5]}"
	# echo "   BROADCAST:  ${ARRAY_NETWORK[6]}"
	# echo
	#
	# #get x settings from database
	# local module resolution
	#
	# #reset i
	# declare -i i=0
	# all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select module,
	# resolution
	# from cfg_grafik where serial='${ALX_SERIAL}'")
	# #split'em up and put in array
	# for x in ${all}
	# do
	# ARRAY_GRAFIK[${i}]=${x}
	# ((i++))
	# done
	#
	# echo " VGA:"
	# echo "   MODULE:     ${ARRAY_GRAFIK[0]}"
	# echo "   RESOLUTION: ${ARRAY_GRAFIK[1]}"
	# echo
	#
	# #get ica-sessions from database
	# ARRAY_SESSIONS=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select session from cfg_session where serial='${ALX_SERIAL}'")
	#
	# echo " SESSIONS:"
	# declare -i i=0
	# for x in ${ARRAY_SESSIONS}
	# do
	# ((i++))
	# echo "   SESSION${i}:   ${x}"
	# done
	# echo
	#
	# #now write these settings
	# local SETTINGSPATH
	#
	# #network
	#
	# #settings must be also set on system, so we put this to menu
	# SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	#
	# [ ! -d ${SETTINGSPATH}/modules ] && install -d ${SETTINGSPATH}/modules
	# echo "${ARRAY_NETWORK[0]}" > ${SETTINGSPATH}/modules/modules
	#
	# [ ! -d ${SETTINGSPATH}/network ] && install -d ${SETTINGSPATH}/network
	# echo "${MY_HOSTNAME}" > ${SETTINGSPATH}/network/hostname
	# echo "${ARRAY_NETWORK[1]}" > ${SETTINGSPATH}/network/domain
	# echo "${ARRAY_NETWORK[2]}" > ${SETTINGSPATH}/network/networking
	# [ -n "${ARRAY_NETWORK[3]}" ] && echo "${ARRAY_NETWORK[3]}" > ${SETTINGSPATH}/network/netmask
	# [ -n "${ARRAY_NETWORK[4]}" ] && echo "${ARRAY_NETWORK[4]}" > ${SETTINGSPATH}/network/dns
	# [ -n "${ARRAY_NETWORK[5]}" ] && echo "${ARRAY_NETWORK[5]}" > ${SETTINGSPATH}/network/gateway
	# [ -n "${ARRAY_NETWORK[6]}" ] && echo "${ARRAY_NETWORK[6]}" > ${SETTINGSPATH}/network/broadcast
	# [ -n "${ARRAY_NETWORK[7]}" ] && echo "${ARRAY_NETWORK[7]}" > ${SETTINGSPATH}/network/ip
56
	validate_networking(){
	#source /opt/alx-config/Configurator/config_functions.sh
57
58	local x i all LOCAL_NETWORK DB_NETWORK SETTINGSPATH	# read_cmdline ${item}
59		read_cmdline()
60	#all arrays:	{
61	# ->  hostname modules domain networking ip netmask dns gateway broadcast	local i
62
63	#networking	for i in $(< /proc/cmdline)
	#get settings from local system
	SETTINGSPATH=${SETTINGS_TEMPLATE}/system
	declare -i i=0
	for x in network/hostname \
	modules/modules \
	network/domain \
	network/networking \
	network/ip \
	network/netmask \
	network/dns \
	network/gateway \
	network/broadcast
64	do	do
65	if [ -f ${SETTINGSPATH}/${x} ]	[[ ${i} = $1 ]] && return 0
	then
	#file exist, then use content
	LOCAL_NETWORK[${i}]="$(< ${SETTINGSPATH}/${x})"
	else
	LOCAL_NETWORK[${i}]=""
	fi
	((i++))
66	done	done
	#get settings from database
	# DB_NETWORK[0]=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select hostname from cfg_network where serial='${ALX_SERIAL}'")
	all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select hostname,
	module,
	domain,
	networking,
	ip,
	netmask,
	dns,
	gateway,
	broadcast
	from cfg_network where serial='${ALX_SERIAL}'")
	#split'em up and put in an array
	declare -i i=0
	for x in ${all}
	do
	DB_NETWORK[${i}]=${x}
	((i++))
	done
	#needed by the small hotfix
	local FIX_ME
	FIX_ME="${DB_NETWORK[2]}"
	#now compare this stuff if they are equal
	for ((i=0; i < 9; i++))
	do
	if [ "${DB_NETWORK[${i}]}" = "${LOCAL_NETWORK[${i}]}" ]
	then
	echo "${i}: ${DB_NETWORK[${i}]} == ${LOCAL_NETWORK[${i}]}"
	#delete equal stuff from DB_NETWORK
	DB_NETWORK[${i}]="*NULL*"
	else
	echo "${i}: ${DB_NETWORK[${i}]} != ${LOCAL_NETWORK[${i}]}"
	fi
	done
	#update configs
	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	declare -i i=0
	for x in network/hostname \
	modules/modules \
	network/domain \
	network/networking \
	network/ip \
	network/netmask \
	network/dns \
	network/gateway \
	network/broadcast
	do
	#update only staff wich wasn't overwritten
	if [ "${DB_NETWORK[${i}]}" != "*NULL*" ]
	then
	#create directory if not exist
	if [ ! -d $(dirname ${SETTINGSPATH}/${x}) ]
	then
	install -d $(dirname ${SETTINGSPATH}/${x})
	fi
	echo "${DB_NETWORK[${i}]}" > ${SETTINGSPATH}/${x}
	# theses fucking config functions:
	# network gets only updated,
	# if ${SETTINGS_TEMPLATE}/menu/network/networking exist
	# so we force an update here
	if [ ! -f ${SETTINGSPATH}/network/networking ]
	then
	[ ! -d ${SETTINGSPATH}/network ] && install -d ${SETTINGSPATH}/network
	echo "${FIX_ME}" > ${SETTINGSPATH}/network/networking
	fi
67
68	#set update flag	return 1
	ALX_NETWORK_SETUP=true
	fi
	((i++))
	done
69	}	}
70
71		update_system_settings()
72		{
73		echo -e ${COLMAGENTA}"Checking system setup ..."${COLDEFAULT}
74
75		# get the modules settings
76		# ! is the first thing that must be configured !
77		config_modules
78
79	validate_xserver(){	# imports network settings from db
80	#source /opt/alx-config/Configurator/config_functions.sh	config_networking
	local x i all LOCAL_XSERVER DB_XSERVER SETTINGSPATH
	#all arrays:
	# ->  xmodule resolution depth mouse monvendor monmodel hsync vref
	#xserver
	#get settings from local system
	#vga
	SETTINGSPATH=${SETTINGS_TEMPLATE}/system
	declare -i i=0
	for x in vga/vga \
	vga/vgares \
	vga/vgadepth
	do
	if [ -f ${SETTINGSPATH}/${x} ]
	then
	#file exist, then use content
	LOCAL_XSERVER[${i}]="$(< ${SETTINGSPATH}/${x})"
	else
	LOCAL_XSERVER[${i}]=""
	fi
	((i++))
	done
	#mouse
	if [ -f ${SETTINGSPATH}/mouse/mouse ]
	then
	#file exist, then use content
	LOCAL_XSERVER[3]="$(< ${SETTINGSPATH}/mouse/mouse)"
	else
	LOCAL_XSERVER[3]=""
	fi
	#monitor
	local myvendor mymodel hsync vref
	if [ -f ${SETTINGSPATH}/monitor/monitor ]
	then
	source ${SETTINGSPATH}/monitor/monitor
	declare -i i=4
	for x in "${myvendor}" \
	"${mymodel}" \
	"${hsync}" \
	"${vref}"
	do
	LOCAL_XSERVER[${i}]="${x}"
	((i++))
	done
	else
	LOCAL_XSERVER[4]=""
	LOCAL_XSERVER[5]=""
	LOCAL_XSERVER[6]=""
	LOCAL_XSERVER[7]=""
	fi
	#get settings from database
	all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select module,
	resolution,
	depth
	from cfg_graphic where serial='${ALX_SERIAL}'")
	#split'em up and put in an array
	declare -i i=0
	for x in ${all}
	do
	DB_XSERVER[${i}]=${x}
	((i++))
	done
	# read mouse
	DB_XSERVER[3]=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select mouse from cfg_input where serial='${ALX_SERIAL}'")
	#monitors
	# all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select vendor,
	# model,
	# hsync,
	# vrefresh
	# from cfg_monitor where serial='${ALX_SERIAL}'")
	all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select vendor,
	model,
	hsync,
	vrefresh
	from list_monitors
	inner join cfg_graphic
	on cfg_graphic.monitorid=list_monitors.id;")
	#split'em up and put in an array
	declare -i i=4
	for x in ${all}
	do
	DB_XSERVER[${i}]=${x}
	((i++))
	done
	# #now compare this stuff if they are equal
	# for ((i=0; i < 8; i++))
	# do
	# if [ "${DB_XSERVER[${i}]}" = "${LOCAL_XSERVER[${i}]}" ]
	# then
	# echo "${i}: ${DB_XSERVER[${i}]} == ${LOCAL_XSERVER[${i}]}"
	#
	# #delete equal stuff from DB_NETWORK
	# DB_XSERVER[${i}]="*NULL*"
	#
	# else
	# echo "${i}: ${DB_XSERVER[${i}]} != ${LOCAL_XSERVER[${i}]}"
	# fi
	# done
	#
	#
	# #update configs
	# SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	# #xserver general
	# declare -i i=0
	# for x in vga/vga \
	# vga/vgares \
	# vga/vgadepth \
	# mouse/mouse
	# do
	# #update only staff wich wasn't overwritten
	# if [ "${DB_XSERVER[${i}]}" != "*NULL*" ]
	# then
	# #create directory if not exist
	# if [ ! -d $(dirname ${SETTINGSPATH}/${x}) ]
	# then
	# install -d $(dirname ${SETTINGSPATH}/${x})
	# fi
	# echo "${DB_XSERVER[${i}]}" > ${SETTINGSPATH}/${x}
	# #set update flag
	# ALX_XSERVER_SETUP=true
	# fi
	# ((i++))
	# done
	#
	# #xserver monitors
	# if [ "${DB_XSERVER[4]}" != "*NULL*" \
	# -o "${DB_XSERVER[5]}" != "*NULL*" \
	# -o "${DB_XSERVER[6]}" != "*NULL*" \
	# -o "${DB_XSERVER[7]}" != "*NULL*" ]
	# then
	# if [ ! -d ${SETTINGSPATH}/monitor ]
	# then
	# install -d ${SETTINGSPATH}/monitor
	# fi
	# echo "myvendor=\"${DB_XSERVER[4]}\"" > ${SETTINGSPATH}/monitor/monitor
	# echo "mymodel=\"${DB_XSERVER[5]}\"" >> ${SETTINGSPATH}/monitor/monitor
	# echo "hsync=\"${DB_XSERVER[6]}\"" >> ${SETTINGSPATH}/monitor/monitor
	# echo "vref=\"${DB_XSERVER[7]}\"" >> ${SETTINGSPATH}/monitor/monitor
	#
	# #set update flag
	# ALX_XSERVER_SETUP=true
	# fi
	# - damn fucking setup_xfree routine need to rewrite this fucking stuff -
	# setup_xfree will only run
	# if ${SETTINGS_TEMPLATE}/menu/vga/vga exist
	# so we must *always* update *all* settings if something has changed
81
82	#now compare this stuff if they are equal	# imports x11 settings from db
83	for ((i=0; i < 8; i++))	config_x11
	do
	if [ "${DB_XSERVER[${i}]}" = "${LOCAL_XSERVER[${i}]}" ]
	then
	echo "${i}: ${DB_XSERVER[${i}]} == ${LOCAL_XSERVER[${i}]}"
	#delete equal stuff from DB_NETWORK
	#DB_XSERVER[${i}]="*NULL*"
	else
	echo "${i}: ${DB_XSERVER[${i}]} != ${LOCAL_XSERVER[${i}]}"
	fi
	done
84
85	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu	# imports session settings from db
86	if [ "${DB_XSERVER[0]}" != "*NULL*" \	config_sessions
	-o "${DB_XSERVER[1]}" != "*NULL*" \
	-o "${DB_XSERVER[2]}" != "*NULL*" \
	-o "${DB_XSERVER[3]}" != "*NULL*" \
	-o "${DB_XSERVER[4]}" != "*NULL*" \
	-o "${DB_XSERVER[5]}" != "*NULL*" \
	-o "${DB_XSERVER[6]}" != "*NULL*" \
	-o "${DB_XSERVER[7]}" != "*NULL*" ]
	then
	[ ! -d ${SETTINGSPATH}/vga ] && install -d ${SETTINGSPATH}/vga
	[ ! -d ${SETTINGSPATH}/mouse ] && install -d ${SETTINGSPATH}/mouse
	[ ! -d ${SETTINGSPATH}/monitor ] && install -d ${SETTINGSPATH}/monitor
	echo "${DB_XSERVER[0]}" > ${SETTINGSPATH}/vga/vga
	echo "${DB_XSERVER[1]}" > ${SETTINGSPATH}/vga/vgares
	echo "${DB_XSERVER[2]}" > ${SETTINGSPATH}/vga/vgadepth
	echo "${DB_XSERVER[3]}" > ${SETTINGSPATH}/mouse/mouse
	echo "myvendor=\"${DB_XSERVER[4]}\"" > ${SETTINGSPATH}/monitor/monitor
	echo "mymodel=\"${DB_XSERVER[5]}\"" >> ${SETTINGSPATH}/monitor/monitor
	echo "hsync=\"${DB_XSERVER[6]}\"" >> ${SETTINGSPATH}/monitor/monitor
	echo "vref=\"${DB_XSERVER[7]}\"" >> ${SETTINGSPATH}/monitor/monitor
	#set update flag
	ALX_XSERVER_SETUP=true
	fi
	}
87
88		# imports printer settings from db
89		config_printing
90
91	validate_sessions(){	# imports auth settings from db
92	#source /opt/alx-config/Configurator/config_functions.sh	config_auth
93
94	local x i all LOCAL_SESSIONS DB_SESSIONS SETTINGSPATH count	# exchange ssh rsa keys
95		HOME=/root config_ssh_auth
	#all arrays:
	# ->  session1 session2 ... sessionN
	#no LOCAL_SESSIONS here, needs bubblesort
	#get settings from database
	all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select session from cfg_sessions where serial='${ALX_SERIAL}'")
	#split'em up and put in an array (only if $all not zero)
	declare -i i=0
	if [ -n "${all}" ]
	then
	for x in ${all}
	do
	DB_SESSIONS[${i}]=${x}
	((i++))
	done
	count=${i}
	else
	count=0
	fi
	## no compare here, can only done with bubblesort or s.th like that
	# shows only the new sessions
	declare -i i=0
	#count=${#DB_SESSIONS[*]} #---> not working gets always 1, why ?
	echo "Number of new sessions: ${count}"
	for ((i=0; i < count; i++))
	do
	echo "${i} - ${DB_SESSIONS[${i}]}"
	done
	#update local configs
	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	declare -i i=0
	#count=${#DB_SESSIONS[*]}
	if [ ${count} -gt 0 ]
	then
	#create directory if not exist
	[ ! -d ${SETTINGSPATH}/sessions ] && install -d ${SETTINGSPATH}/sessions
	#delete old sessions
	echo -n > ${SETTINGSPATH}/sessions/sessions
	for ((i=0; i < count; i++))
	do
	echo "${DB_SESSIONS[${i}]}" >> ${SETTINGSPATH}/sessions/sessions
	done
	#set update flag
	ALX_SESSION_SETUP=true
	fi
96	}	}
97
98		get_system_serial()
99		{
100		local CUR_IP CUR_MAC CUR_MTIME ALX_IFACE
101
102	validate_printing(){	if [[ ${ALX_CONFD_NETWORKING} = true ]]
	#source /opt/alx-config/Configurator/config_functions.sh
	local x i k all LOCAL_PRINTER DB_PRINTER SETTINGSPATH count
	#all arrays: [2 dimensions !]
	# ->  name1 name2 ... nameN
	# ->  name1 printingport ip share
	#later on, for now -> name1 port1 ip1 share1 name2 ....
	# seperator is 4
	#local PRINTERNAME PRINTING IP SHARE
	# update *always* printers from database;
	# compare with local settings cannot be done yet
	#get settings from database
	all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select printer_name,
	port,
	ip,
	share
	from cfg_printers where serial='${ALX_SERIAL}'")
	#split'em up and put in an array
	declare -i i=0
	declare -i k=0
	if [ -n "${all}" ]
103	then	then
104	for x in ${all}	ALX_IFACE="$(< ${SETTINGSPATH}/confd-networking)"
	do
	((k++))
	DB_PRINTER[${i}]="${DB_PRINTER[${i}]} ${x}"
	if [ ${k} -eq 4 ]
	then
	((i++))
	#reset $k
	declare -i k=0
	fi
	done
	count=${i}
105	else	else
106	count=0	ALX_IFACE="eth0"
	fi
	#echo settings
	echo "Number of new printers: ${count}"
	for ((i=0; i < count; i++))
	do
	echo "${i} printer:"
	for x in ${DB_PRINTER[${i}]}
	do
	echo "    ${x}"
	done
	done
	#import settings (only if counter > 0)
	local prnset
	#delete all printers (*always*)
	if [ -d ${SETTINGS_TEMPLATE}/system/printing ]
	then
	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	[ -d ${SETTINGSPATH}/delete ] && rm -rf ${SETTINGSPATH}/delete
	install -d ${SETTINGSPATH}/delete
	mv -f ${SETTINGS_TEMPLATE}/system/printing/* ${SETTINGSPATH}/delete
	rm -rf ${SETTINGS_TEMPLATE}/system/printing
	#set update flag (*always*)
	ALX_PRINTER_SETUP=true
107	fi	fi
	if [ ${count} -gt 0 ]
	then
	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	[ ! -d ${SETTINGSPATH}/printing ] && install -d ${SETTINGSPATH}/printing
	for ((i=0; i < count; i++))
	do
	declare -i k=0
	for x in ${DB_PRINTER[${i}]}
	do
	prnset[${k}]=${x}
	((k++))
	done
	echo "PRINTERNAME=${prnset[0]}" >  ${SETTINGSPATH}/printing/${prnset[0]}
	echo "PRINTING=${prnset[1]}" >> ${SETTINGSPATH}/printing/${prnset[0]}
	echo "IP=${prnset[2]}" >> ${SETTINGSPATH}/printing/${prnset[0]}
	echo "SHARE=${prnset[3]}" >> ${SETTINGSPATH}/printing/${prnset[0]}
	done
	#set update flag (*always*)
	ALX_PRINTER_SETUP=true
	fi
	}
	update_system_settings(){
	source /opt/alx-config/Configurator/config_functions.sh
108
109	echo -e ${COLMAGENTA}"Checking system setup ..."${COLDEFAULT}	# check if serial file exists
110		if [ -f /etc/alxconfig-ng/serial ] && [[ ${ALX_FORCED_RECHECK} = false ]]
	echo
	echo "network"
	validate_networking
	echo
	echo "xserver"
	validate_xserver
	echo
	echo "sessions"
	validate_sessions
	echo
	#echo "printers"
	#validate_printing
	#echo
	if [ "${ALX_NETWORK_SETUP}" == "true" ]
	then
	echo -e ${COLMAGENTA}"Updating network settings"${COLDEFAULT}
	setup_modules
	setup_network
	fi
	if [ "${ALX_XSERVER_SETUP}" == "true" ]
	then
	echo -e ${COLMAGENTA}"Updating xserver settings"${COLDEFAULT}
	setup_xfree
	fi
	if [ "${ALX_SESSION_SETUP}" == "true" ]
111	then	then
112	echo -e ${COLMAGENTA}"Updating session settings"${COLDEFAULT}	source /etc/alxconfig-ng/serial
	setup_sessions
	fi
	#if [ "${ALX_PRINTER_SETUP}" == "true" ]
	#then
	# echo -e ${COLMAGENTA}"Updating printer settings"${COLDEFAULT}
	# setup_printers
	#fi
	#clean up temp files
	local SETTINGSPATH
	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	#[ -d ${SETTINGSPATH} ] && rm -rf ${SETTINGSPATH}
	}
113
114	get_system_serial(){	# start preliminary networking (dhcp)
115		preliminary_network start
116
117	local CUR_IP CUR_MAC CUR_MTIME	# check if mysql server is reachable
118		# if not abort this script
119		if ! reach_mysql_server
120		then
121		preliminary_network stop
122		exit 1
123		fi
124
125	#check if serial file exists	CUR_IP=$(/sbin/ifconfig ${ALX_IFACE} | sed -n '/addr:/s/ [^r]*..//gp')
126	if [ -f /etc/alx-config/serial ]	CUR_MAC=$(/sbin/ifconfig ${ALX_IFACE} | grep HWaddr | cut -d ' ' -f11)
	then
	source /etc/alx-config/serial
	# if system is already configured, it *has* a hostname.
	# so we take the hostname of this system here
	source /etc/hostname
	#start preliminary networking (dhcp)
	preliminary_network start
	CUR_IP=$(/sbin/ifconfig eth0 | sed -n '/addr:/s/ [^r]*..//gp')
	CUR_MAC=$(/sbin/ifconfig eth0 | grep HWaddr | cut -d ' ' -f11)
127	CUR_MTIME=$(date +%s)	CUR_MTIME=$(date +%s)
128
129	echo -e ${COLOREDSTAR} "Trying to validate my serial ..."	echo -e ${COLOREDSTAR} "Trying to validate my serial ..."
130
131	#nice serial output	# nice serial output
132	$CURS_UP	$CURS_UP
133	$SET_WCOL	$SET_WCOL
134	echo "[ SN: ${ALX_SERIAL} ]"	echo "[ SN: ${ALX_SERIAL} ]"
	# #is this system outdated ?
	# #MY_HOSTNAME=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# # "select hostname from cfg_serial where id='${ALX_SERIAL}'")
	#
	# #we do this now with the date instead of the hostname
	# local MY_ALX_REG_DATE
	# MY_ALX_REG_DATE=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select mtime from client_serial where serial='${ALX_SERIAL}'")
	#
	# #if [ "${MY_HOSTNAME}" == "${HOSTNAME}" ]
	# if [ "${MY_ALX_REG_DATE}" == "${ALX_REG_DATE}" ]
	# then
	# #set ALX_STATE to ok so everybody that everything was ok
	# ALX_STATE=ok
	#
	# evaluate_retval
	# else
	# #print false (works only if this is the first statement here)
	# evaluate_retval
	#
	# #set ALX_STATE to error so everybody sees there was an error
	# ALX_STATE=error
	# fi
135
136	if validate_serial "${ALX_SERIAL}" "${ALX_REG_DATE}" "${CUR_MAC}"	if validate_serial "${ALX_SERIAL}" "${ALX_REG_DATE}" "${CUR_MAC}"
137	then	then
138	ALX_STATE="ok"	ALX_STATE="ok"
139	else	else
140		# abort on non valid serial
141	ALX_STATE="invalid serial"	ALX_STATE="invalid serial"
142		echo "ALX_STATE=${ALX_STATE}" > /etc/alxconfig-ng/state/state
143		show_invalid_serial_msg
144		exit 1
145	fi	fi
146
147	else	else
148	#run hardware detection	# run hardware detection
149	echo	echo
150	echo -e ${COLMAGENTA}"Preparing system for first boot"${COLDEFAULT}	if [[ ${ALX_FORCED_RECHECK} = true ]]
151		then
152		echo -e ${COLMAGENTA}"Hardware autodetection forced by system-administrator"${COLDEFAULT}
153		else
154		echo -e ${COLMAGENTA}"Preparing system for first boot"${COLDEFAULT}
155		fi
156	ALX_HW_DETECT=true	ALX_HW_DETECT=true
157	/etc/init.d/hwdetect start	/etc/init.d/hwdetect start
158
159	#set hostname to alx_default_hostname	# set hostname to alx_default_hostname
160		# use old hostname if this is a forced re-check
161		[[ ${ALX_FORCED_RECHECK} = true ]] && ALX_DEFAULT_HOSTNAME="$(< /etc/hostname)"
162	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx
163	HOSTNAME="${ALX_DEFAULT_HOSTNAME}"	HOSTNAME="${ALX_DEFAULT_HOSTNAME}"
164
165	#update the hostname on the system for sure	# update the hostname on the system for sure
166	echo "HOSTNAME=${HOSTNAME}" > /etc/hostname	echo "${HOSTNAME}" > /etc/hostname
167
168	#start preliminary networking (dhcp)	# start preliminary networking (dhcp)
169	preliminary_network start	preliminary_network start
170
171		# check if mysql server is reachable
172		# if not abort this script
173		if ! reach_mysql_server
174		then
175		preliminary_network stop
176		exit 1
177		fi
178
179	CUR_IP=$(/sbin/ifconfig eth0 | sed -n '/addr:/s/ [^r]*..//gp')	CUR_IP=$(/sbin/ifconfig eth0 | sed -n '/addr:/s/ [^r]*..//gp')
180	CUR_MAC=$(/sbin/ifconfig eth0 | grep HWaddr | cut -d ' ' -f11)	CUR_MAC=$(/sbin/ifconfig eth0 | grep HWaddr | cut -d ' ' -f11)
181	CUR_MTIME=$(date +%s)	CUR_MTIME=$(date +%s)
182
183		# abort now if this is a forced re-check
184		if [[ ${ALX_FORCED_RECHECK} = true ]]
185		then
186		# but first check the serial
187		source /etc/alxconfig-ng/serial
188
189		echo -e ${COLOREDSTAR} "Trying to validate my serial ..."
190
191		# nice serial output
192		$CURS_UP
193		$SET_WCOL
194		echo "[ SN: ${ALX_SERIAL} ]"
195
196		if validate_serial "${ALX_SERIAL}" "${ALX_REG_DATE}" "${CUR_MAC}"
197		then
198		ALX_STATE="ok"
199		else
200		# abort on non valid serial
201		ALX_STATE="invalid serial"
202		echo "ALX_STATE=${ALX_STATE}" > /etc/alxconfig-ng/state/state
203		show_invalid_serial_msg
204		exit 1
205		fi
206
207		# write current state to temp file
208		echo "ALX_STATE=${ALX_STATE}" > /etc/alxconfig-ng/state/state
209		[ -f /hardware-auto-detection ] && rm /hardware-auto-detection
210
211		# now export ALX_FORCED_RECHECK=true
212		# that the setting will be updated not inserted !
213		export ALX_FORCED_RECHECK=true
214		return 0
215		fi
216
217	echo -e ${COLOREDSTAR} "Trying to get new serial ..."	echo -e ${COLOREDSTAR} "Trying to get new serial ..."
	#request new serial
	#ALX_REG_DATE="$(date +%F)"
	#we're using the mtime now (better for vaildating the serial)
	mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"insert into client_serials(
	mtime,
	mac
	)
	values(
	'${CUR_MTIME}',
	'${CUR_MAC}'
	);"
	#then validate and retrieve serial
	### warning must be changed that only the LAST ID will be fetched,  ###
	### or you get error if the computer name and date are the same     ###
	### you have more then one serial number than                       ###
	#not 100% working may get more than *one* id
	#ALX_SERIAL=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select id from cfg_serial where datum='${ALX_REG_DATE}' and hostname='${HOSTNAME}'")
	#select highest id only (added max)
	ALX_SERIAL=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select max(serial) from client_serials where mtime='${CUR_MTIME}' and mac='${CUR_MAC}'")
218
219	if [ "${ALX_SERIAL}" != NULL ]	# request a new serial; one command now (cause must be done in the same session)
220		ALX_SERIAL=$(mysqldo "insert into client_serials (mtime, mac) values('${CUR_MTIME}','${CUR_MAC}');
221		select last_insert_id();")
222
223		if [[ ${ALX_SERIAL} != NULL ]]
224	then	then
225	#nice serial output	# nice serial output
226	$CURS_UP	$CURS_UP
227	$SET_WCOL	$SET_WCOL
228	echo "[ SN: ${ALX_SERIAL} ]"	echo "[ SN: ${ALX_SERIAL} ]"
229
230	#set ALX_STATE to ok so everybody that everything was ok	# set ALX_STATE to ok so everybody knows that everything was ok
231	ALX_STATE=ok	ALX_STATE=ok
232
233	echo "ALX_SERIAL=${ALX_SERIAL}" > /etc/alx-config/serial	echo "ALX_SERIAL=${ALX_SERIAL}" > /etc/alxconfig-ng/serial
234	echo "ALX_REG_DATE=${CUR_MTIME}" >> /etc/alx-config/serial	echo "ALX_REG_DATE=${CUR_MTIME}" >> /etc/alxconfig-ng/serial
235
236	evaluate_retval	evaluate_retval
237	else	else
238	#print false (works only if this is the first statement here)	# print false (works only if this is the first statement here)
239	evaluate_retval	evaluate_retval
240
241	#set ALX_STATE to error so everybody sees there was an error	# set ALX_STATE to error so everybody sees there was an error
242	ALX_STATE=error	ALX_STATE=error
243
244	#show an error that no new serial was found	# show an error that no new serial was found
245	#nice serial output	# nice serial output
246	$CURS_UP	$CURS_UP
247	$SET_WCOL	$SET_WCOL
248	echo -e "[ SN: ${COLRED}None, 0${COLDEFAULT} ]"	echo -e "[ SN: ${COLRED}None, 0${COLDEFAULT} ]"
249	fi	fi
250	fi	fi
251
252	#write current state to temp file	# write current state to temp file
253	echo "ALX_STATE=${ALX_STATE}" > /etc/alx-config/state/state	echo "ALX_STATE=${ALX_STATE}" > /etc/alxconfig-ng/state/state
254		echo "ALX_IFACE=${ALX_IFACE}" >> /etc/alxconfig-ng/state/state
255	}	}
256
257
258	check_is_configured() {	check_is_configured()
259	if [ -f /etc/alx-config/state/configured ]	{
260		if [ -f /etc/alxconfig-ng/state/configured ]
261	then	then
262	export ALX_CONFIGURED=true	export ALX_CONFIGURED=true
263	else	else
#	Line 927  check_is_configured() {	Line 267  check_is_configured() {
267
268
269	# imports current settings to the database resolved by the hardware detection	# imports current settings to the database resolved by the hardware detection
270	import_settings_to_db() {	import_settings_to_db()
271	#note: networking is always 'dhcp' if hw was autodetected	{
272	#note: default_domain/hostname is set in config.rc	# note: networking is always 'dhcp' if hw was autodetected
273		# note: default_domain/hostname is set in config.rc
274	#to be safe, we do some sanity checks
275		# to be safe, we do some sanity checks
276	[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain	[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain
277	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx
278
279	#vars used by hwdetect	# vars used by hwdetect
280	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
281	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
282	local MOUSETYPE XMOUSETYPE FULLNAME DEVICE	local MOUSETYPE XMOUSETYPE FULLNAME DEVICE
283
284	#get setting from hwdetect	# get setting from hwdetect
285	source /etc/sysconfig/hwsetup/knoppix	source /etc/sysconfig/hwsetup/knoppix
286	source /etc/sysconfig/hwsetup/mouse	source /etc/sysconfig/hwsetup/mouse
287
288	echo	echo
289	echo -e ${COLMAGENTA}"Importing detected settings to database"${COLDEFAULT}	echo -e ${COLMAGENTA}"Importing detected settings to database"${COLDEFAULT}
290
291	#network	# network
292	echo -e "      Network settings ..."	echo -e "      Network settings ..."
293	mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \	if [[ ${ALX_CONFD_NETWORKING} = true ]]
294	"insert into cfg_network(	then
295	hostname,	# get settings
296	serial,	#source ${rc_base}/init.d/network &> /dev/null
297	module,	for iface in $(onboot_interface_list ${network_settings}/net.*)
298	domain,	do
299	networking	[[ $(< ${SETTINGSPATH}/confd-networking) != ${iface} ]] && continue
300	)	echo "WARNING: only importing settings for interface [ ${iface} ] !"
301	values(	source ${network_settings}/net.${iface} || exit 1
302	'${ALX_DEFAULT_HOSTNAME}',	NETCARD_DRIVER="$(cat /etc/modules.d/net.${iface} | cut -d' ' -f3)"
303	'${ALX_SERIAL}',
304	'${NETCARD_DRIVER}',	mysqldo "insert into cfg_network(
305	'${ALX_DEFAULT_DOMAIN}',	hostname,
306	'dhcp'	serial,
307	);"	module,
308		domain,
309		networking,
310		netmask,
311		dns,
312		gateway,
313		broadcast,
314		ip,
315		forcemacto,
316		wireless_bitrate,
317		wireless_channel,
318		wireless_essid,
319		wireless_frequency,
320		wireless_mode,
321		wireless_nick,
322		wireless_auth_mode,
323		wireless_key_length,
324		wireless_key,
325		wireless_key_ascii
326		)
327		values(
328		'${ALX_DEFAULT_HOSTNAME}',
329		'${ALX_SERIAL}',
330		'${NETCARD_DRIVER}',
331		'${ALX_DEFAULT_DOMAIN}',
332		'${NETWORKING}',
333		'${NETMASK}',
334		'${NAMESERVER}',
335		'${GATEWAY}',
336		'${BROADCAST}',
337		'${IP}',
338		'${FORCE_MAC_TO}',
339		'${WIRELESS_BITRATE}',
340		'${WIRELESS_CHANNEL}',
341		'${WIRELESS_ESSID}',
342		'${WIRELESS_FREQUENCY}',
343		'${WIRELESS_MODE}',
344		'${WIRELESS_NICK}',
345		'${WIRELESS_AUTH_MODE}',
346		'${WIRELESS_KEY_LENGTH}',
347		'${WIRELESS_KEY}',
348		'${WIRELESS_KEY_ASCII}'
349		);"
350
351		# only insert the *FIRST* iface
352		break
353		done
354		else
355		mysqldo "insert into cfg_network(
356		hostname,
357		serial,
358		module,
359		domain,
360		networking
361		)
362		values(
363		'${ALX_DEFAULT_HOSTNAME}',
364		'${ALX_SERIAL}',
365		'${NETCARD_DRIVER}',
366		'${ALX_DEFAULT_DOMAIN}',
367		'dhcp'
368		);"
369		fi
370	evaluate_retval	evaluate_retval
371
372	#xserver	# xserver
373	echo -e "      Graphic settings ..."	echo -e "      Graphic settings ..."
374	#xserver general	# xserver general
375	( mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \	( mysqldo "insert into cfg_graphic(
	"insert into cfg_graphic(
376	serial,	serial,
377	module,	module,
378	resolution,	resolution,
379	depth	depth,
380		monitorid
381	)	)
382	values(	values(
383	'${ALX_SERIAL}',	'${ALX_SERIAL}',
384	'${XMODULE}',	'${XMODULE}',
385	'1024x768',	'1024x768',
386	'16'	'16',
387	);";	'0'
388	#xserver monitor	);"; )
389	mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \	evaluate_retval
390	"insert into cfg_monitor(
391		# input
392		echo -e "      Input settings ..."
393		mysqldo "insert into cfg_input(serial,mouse) values('${ALX_SERIAL}','${XMOUSETYPE}');"
394		evaluate_retval
395
396		# auth
397		echo -e "      Authentification settings ..."
398		mysqldo "insert into client_auth(
399	serial,	serial,
400	vendor,	username,
401	model,	shell,
402	hsync,	vnc,
403	vrefresh	samba,
404		station
405	)	)
406	values(	values(
407	'${ALX_SERIAL}',	'${ALX_SERIAL}',
408	'Aamazing',	'${ALX_UNPRIV_USER}',
409	'CM-1528-FS',	'',
410	'28-64',	'',
411	'47-104'	'',
412	);";	''
413		);"
414	# input	evaluate_retval
415	mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
416	"insert into cfg_input(serial,mouse) values('${ALX_SERIAL}','${XMOUSETYPE}');";)	# exchange ssh rsa keys - the first boot needs this !
417		# or no reboot will work via the webadmin
418		echo -e "      SSH authentification settings ..."
419		HOME=/root config_ssh_auth
420		evaluate_retval
421
422		# autostart
423		echo -e "      Autostart settings ..."
424		mysqldo "insert into cfg_autostart(serial,session) values('${ALX_SERIAL}','');"
425
426		# screensaver
427		echo -e "      Screensaver settings ..."
428		mysqldo "insert into cfg_screensaver(serial,screensaver) values('${ALX_SERIAL}','')"
429
430	evaluate_retval	evaluate_retval
431	}	}
432
433	# imports current settings to the local system resolved by the hardware detection	# imports current settings to the database resolved by the hardware detection
434	import_settings_local(){	update_settings_in_db()
435	#note: networking is always 'dhcp' if hw was autodetected	{
436	#note: default_domain/hostname is set in config.rc	# note: networking is always 'dhcp' if hw was autodetected
437		# note: default_domain/hostname is set in config.rc or exported
438	#to be safe, we do some sanity checks	# note: we updating only hardware settings here !
439
440		# to be safe, we do some sanity checks
441	[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain	[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain
442	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx
443
444	#vars used by hwdetect	# vars used by hwdetect
445	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
446	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
447	local MOUSETYPE XMOUSETYPE FULLNAME DEVICE	local MOUSETYPE XMOUSETYPE FULLNAME DEVICE
448
449		# get setting from hwdetect
	#get setting from hwdetect
450	source /etc/sysconfig/hwsetup/knoppix	source /etc/sysconfig/hwsetup/knoppix
451	source /etc/sysconfig/hwsetup/mouse	source /etc/sysconfig/hwsetup/mouse
452
453	echo	echo
454	echo -e ${COLMAGENTA}"Importing detected settings to local system"${COLDEFAULT}	echo -e ${COLMAGENTA}"Updating detected settings in database"${COLDEFAULT}
455
456		# network
	#allready configured, no update needed so we put it to system
	SETTINGSPATH=${SETTINGS_TEMPLATE}/system
	#network
457	echo -e "      Network settings ..."	echo -e "      Network settings ..."
458		if [[ ${ALX_CONFD_NETWORKING} = true ]]
459		then
460		# get settings
461		#source ${rc_base}/init.d/network &> /dev/null
462		for iface in $(onboot_interface_list ${network_settings}/net.*)
463		do
464		[[ $(< ${SETTINGSPATH}/confd-networking) != ${iface} ]] && continue
465		echo "WARNING: only importing settings for interface [ ${iface} ] !"
466		source ${network_settings}/net.${iface} || exit 1
467		NETCARD_DRIVER="$(cat /etc/modules.d/net.${iface} | cut -d' ' -f3)"
468
469		mysqldo "update cfg_network set
470		hostname='${ALX_DEFAULT_HOSTNAME}',
471		module='${NETCARD_DRIVER}',
472		domain='${ALX_DEFAULT_DOMAIN}',
473		networking='${NETWORKING}',
474		netmask='${NETMASK}',
475		dns='${NAMESERVER}',
476		gateway='${GATEWAY}',
477		broadcast='${BROADCAST}',
478		ip='${IP}',
479		forcemacto='${FORCE_MAC_TO}',
480		wireless_bitrate='${WIRELESS_BITRATE}',
481		wireless_channel='${WIRELESS_CHANNEL}',
482		wireless_essid='${WIRELESS_ESSID}',
483		wireless_frequency='${WIRELESS_FREQUENCY}',
484		wireless_mode='${WIRELESS_MODE}',
485		wireless_nick='${WIRELESS_NICK}',
486		wireless_auth_mode='${WIRELESS_AUTH_MODE}',
487		wireless_key_length='${WIRELESS_KEY_LENGTH}',
488		wireless_key='${WIRELESS_KEY}',
489		wireless_key_ascii='${WIRELESS_KEY_ASCII}'
490		where serial=${ALX_SERIAL};"
491
492	[ ! -d ${SETTINGSPATH}/modules ] && install -d ${SETTINGSPATH}/modules	# only insert the *FIRST* iface
493	echo "${NETCARD_DRIVER}" > ${SETTINGSPATH}/modules/modules	break
494		done
495	[ ! -d ${SETTINGSPATH}/network ] && install -d ${SETTINGSPATH}/network	else
496	( echo "${ALX_DEFAULT_HOSTNAME}" > ${SETTINGSPATH}/network/hostname;	mysqldo "update cfg_network set
497	echo "${ALX_DEFAULT_DOMAIN}" > ${SETTINGSPATH}/network/domain;	hostname='${ALX_DEFAULT_HOSTNAME}',
498	echo "dhcp" > ${SETTINGSPATH}/network/networking )	module='${NETCARD_DRIVER}',
499		domain='${ALX_DEFAULT_DOMAIN}',
500		networking='dhcp'
501		where serial=${ALX_SERIAL};"
502		fi
503	evaluate_retval	evaluate_retval
504
505		# xserver
	#xserver
506	echo -e "      Graphic settings ..."	echo -e "      Graphic settings ..."
507		# xserver general
508	[ ! -d ${SETTINGSPATH}/vga ] && install -d ${SETTINGSPATH}/vga	mysqldo "update cfg_graphic set
509	[ ! -d ${SETTINGSPATH}/mouse ] && install -d ${SETTINGSPATH}/mouse	module='${XMODULE}',
510	[ ! -d ${SETTINGSPATH}/monitor ] && install -d ${SETTINGSPATH}/monitor	resolution='1024x768',
511	( echo "${XMODULE}" > ${SETTINGSPATH}/vga/vga;	depth='16',
512	echo "16" > ${SETTINGSPATH}/vga/vgadepth;	monitorid='0'
513	echo "1024x768" > ${SETTINGSPATH}/vga/vgares;	where serial=${ALX_SERIAL};"
	echo "${XMOUSETYPE}" > ${SETTINGSPATH}/mouse/mouse;
	echo "myvendor=\"Aamazing\"" > ${SETTINGSPATH}/monitor/monitor;
	echo "mymodel=\"CM-1528-FS\"" >> ${SETTINGSPATH}/monitor/monitor;
	echo "hsync=\"28-64\"" >> ${SETTINGSPATH}/monitor/monitor;
	echo "vref=\"47-104\"" >> ${SETTINGSPATH}/monitor/monitor;)
514	evaluate_retval	evaluate_retval
515
516	#set system state to 'already configured'	# input
517	touch /etc/alx-config/state/configured	echo -e "      Input settings ..."
518		mysqldo "update cfg_input set mouse='${XMOUSETYPE}' where serial=${ALX_SERIAL};"
519		evaluate_retval
520		}
521
522		# imports current settings to the local system resolved by the hardware detection
523		# we only need the network settings
524		import_settings_local()
525		{
526		# note: networking is always 'dhcp' if hw was autodetected
527		# note: default_domain/hostname is set in config.rc
528
529		# to be safe, we do some sanity checks
530		[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain
531		[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx
532
533		# vars used by hwdetect
534		local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
535		local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
536		local MOUSETYPE XMOUSETYPE FULLNAME DEVICE
537
538		# get setting from hwdetect
539		source /etc/sysconfig/hwsetup/knoppix
540
541		echo
542		echo -e ${COLMAGENTA}"Importing detected settings to local system"${COLDEFAULT}
543
544		if [[ ${ALX_CONFD_NETWORKING} = false ]]
545		then
546		#[ ! -d ${SETTINGSPATH} ] && install -d ${SETTINGSPATH}
547		#echo "${NETCARD_DRIVER}" > ${SETTINGSPATH}/modules
548
549		# set an device alias for modprobe.conf
550		[ ! -d /etc/modules.d ] && install -d /etc/modules.d
551		echo "alias eth0 ${NETCARD_DRIVER}" > /etc/modules.d/net.eth0
552
553		# regenerate modprobe.conf
554		[ -x $(which modules-update) ] && modules-update || echo "cannot regen modprobe.conf"
555		evaluate_retval
556		fi
557
558		# set system state to 'already configured'
559		touch /etc/alxconfig-ng/state/configured
560
561		# if only an recheck was forced than abort now
562		[[ ${ALX_FORCED_RECHECK} = true ]] && return 0
563
564		# create a fresh fluxbox directory
565		[ -d ${ALX_UNPRIV_HOME}/.fluxbox ] && rm -rf ${ALX_UNPRIV_HOME}/.fluxbox
566		install -d ${ALX_UNPRIV_HOME}/.fluxbox
567
568		# now generate fluxbox config files
569
570		# fluxbox main config
571		cat ${ALX_SKELETONS}/fluxbox/init \
572		> ${ALX_UNPRIV_HOME}/.fluxbox/init
573
574		# fluxbox autostart
575		cat ${ALX_SKELETONS}/fluxbox/apps \
576		> ${ALX_UNPRIV_HOME}/.fluxbox/apps
577
578		# fluxbox menu header
579		cat ${ALX_SKELETONS}/fluxbox/menu.header \
580		> ${ALX_UNPRIV_HOME}/.fluxbox/menu
581
582		# now fix it with proper messages :P
583		local ver="$(< /etc/mageversion)"
584		sed -i "s:@CHANGEME@:alx-${ver}  #${ALX_SERIAL}:g" \
585		${ALX_UNPRIV_HOME}/.fluxbox/menu
586
587		# add a newline (maybe there is no crlf in the header)
588		echo >> ${ALX_UNPRIV_HOME}/.fluxbox/menu
589
590		# fluxbox menu footer
591		cat ${ALX_SKELETONS}/fluxbox/menu.footer \
592		>> ${ALX_UNPRIV_HOME}/.fluxbox/menu
593
594		# add a newline (maybe there is no crlf in the footer)
595		echo >> ${ALX_UNPRIV_HOME}/.fluxbox/menu
596
597
598		# setup some standart icons (sysinfo.lnk)
599		# basic config
600		cat ${ALX_SKELETONS}/xtdesktop/xtdeskrc > ${ALX_UNPRIV_HOME}/.xtdeskrc
601
602		# clean desktop icon location
603		[ -d ${ALX_UNPRIV_HOME}/.xtdesktop ] && rm -rf ${ALX_UNPRIV_HOME}/.xtdesktop
604		install -d ${ALX_UNPRIV_HOME}/.xtdesktop
605
606		# last but not least gen a icon with some sys informations
607		local sysinfo
608		local osversion
609		local xres
610		local yres
611
612		osversion="$(< /etc/mageversion)"
613		sysinfo="Hostname: ${ALX_DEFAULT_HOSTNAME} Serial: #${ALX_SERIAL} OS: alx-${osversion} Kernel: $(uname -r)"
614
615		# at first boot we got always a resolution of 1024x768-16@60
616		# middle of the screen
617		# (no txt - length required, xtdesk manage that itself)
618		xres="$((1024 / 2))"
619		# default y pos (full yres -22 !)
620		yres="$((768 - 22 ))"
621
622		generate_icon \
623		--name "${sysinfo}" \
624		--command "exit 0" \
625		--icon "${ALX_SESSIONS_ICONS}/sysinfo.png" \
626		--dest "${ALX_UNPRIV_HOME}/.xtdesktop/sysinfo.lnk" \
627		--xres "${xres}" \
628		--yres "${yres}" \
629		--icon-width "1" \
630		--icon-height "1"
631
632		# create a xinitrc
633		echo "exec startfluxbox" > ${ALX_UNPRIV_HOME}/.xinitrc
634
635		# set correct permissions
636		chown ${ALX_UNPRIV_USER}:${ALX_UNPRIV_GROUP} ${ALX_UNPRIV_HOME}
637		chown ${ALX_UNPRIV_USER}:${ALX_UNPRIV_GROUP} ${ALX_UNPRIV_HOME}/.fluxbox
638		chmod 0755 ${ALX_UNPRIV_HOME}/.fluxbox
639		chmod 0755 ${ALX_UNPRIV_HOME}/.xtdesktop
640		chmod 0644 ${ALX_UNPRIV_HOME}/.xtdeskrc
641		chmod 0644 ${ALX_UNPRIV_HOME}/.xinitrc
642	}	}
643
644	#start|stop	# start|stop
645	preliminary_network(){	preliminary_network()
646		{
647	local module	local module
648
649	if [ -f /etc/alx-config/state/configured ]	if [ -f /etc/alxconfig-ng/state/configured ]
650	then	then
651	#get module name	# compat for old clients
652	module=$(cat ${SETTINGS_TEMPLATE}/system/modules/modules)	if [ -f ${SETTINGSPATH}/modules ]
653	modprobe ${module}	then
654		# get module name
655		module=$(cat ${SETTINGSPATH}/modules)
656		modprobe ${module}
657		fi
658	else	else
659	#vars used by hwdetect	# vars used by hwdetect
660	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
661	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
662
663	#get setting from hwdetect	# get setting from hwdetect
664	source /etc/sysconfig/hwsetup/knoppix	source /etc/sysconfig/hwsetup/knoppix
665	modprobe ${NETCARD_DRIVER}	modprobe ${NETCARD_DRIVER}
666	fi	fi
667
668	case $1 in	case $1 in
669	start)	start)
670	# keeping like always safe:	# keeping like always safe:
#	Line 1097  preliminary_network(){	Line 678  preliminary_network(){
678	else	else
679	rm -f /var/run/dhcpcd-eth?.pid	rm -f /var/run/dhcpcd-eth?.pid
680	fi	fi
681		[[ ${ALX_CONFD_NETWORKING} = true ]] && [[ ${RUNLEVEL} != S ]] && \
682	echo -e ${COLMAGENTA}"Starting preliminary network ... "${COLDEFAULT}	${rc_base}/init.d/network stop
683	#dhcpcd &> /dev/null #&& echo "ok" || echo "false"
684		echo -e ${COLMAGENTA}"Starting preliminary networking ... "${COLDEFAULT}
685	# aka_fix ########################################
686	ifconfig eth0 128.20.222.222 netmask 255.255.0.0 up	# start network configured from /etc/conf.d
687	route del default gw 128.20.50.13 &> /dev/null	if [[ ${ALX_CONFD_NETWORKING} = true ]]
688	route add default gw 128.20.50.21 &> /dev/null	then
689	echo "nameserver 128.20.50.21" > /etc/resolv.conf	${rc_base}/init.d/network start
690	##################################################	else
691	evaluate_retval	echo -e ${COLOREDSTAR}"Starting default dhcp based networking ... "${COLDEFAULT}
692		# -t 10 timeout of 10 secs
693		dhcpcd -t 10 &> /dev/null
694		evaluate_retval
695		fi
696	;;	;;
697
698	stop)	stop)
699	echo -e ${COLMAGENTA}"Stopping preliminary network ... "${COLDEFAULT}	echo -e ${COLMAGENTA}"Stopping preliminary networking ... "${COLDEFAULT}
700	ifconfig eth0 down	if [[ ${ALX_CONFD_NETWORKING} = true ]]
701		then
702		${rc_base}/init.d/network stop
703		else
704		echo -e ${COLOREDSTAR}"Stopping default dhcp based networking ... "${COLDEFAULT}
705		ifconfig eth0 down
706		fi
707	if ps -A|grep dhcpcd > /dev/null	if ps -A|grep dhcpcd > /dev/null
708	then	then
	#echo -en ${COLMAGENTA}"Stopping preliminary network ... "${COLDEFAULT}
709	dhcpcd -z  &> /dev/null	dhcpcd -z  &> /dev/null
710	fi	fi
711	evaluate_retval	evaluate_retval
712	;;	;;
713
714	*)	*)
715	echo "Usage: preliminary_network {start|stop}"	echo "Usage: preliminary_network {start|stop}"
716	;;	;;
717	esac	esac
718	}	}
719
720		reset_system_settings()
721		{
722		# force load of de kbdkeys
723		loadkeys -q de
724		echo
725		echo -en ${COLRED}
726		echo -n "*** Warning: you are about to reset *all* local settings on this system!"
727		echo -e ${COLDEFAULT}
728		echo "*** Do you really want to continue ?"
729		echo -n "*** Enter 'yes' to continue, anything else to abort: "
730		read kbinsert
731		if [[ ${kbinsert} = yes ]]
732		then
733		echo -en ${COLRED}
734		echo -n "*** OK, you really want it ... killing all settings: "
735		for i in 3 2 1 now
736		do
737		echo -n " ${i}"
738		sleep 1
739		done
740		echo -e ${COLDEFAULT}
741
742		## reset all settings:
743		rm -rf ${SETTINGSPATH}/*
744		rm -f /etc/alxconfig-ng/serial
745		rm -rf /etc/alxconfig-ng/state
746
747		# clear all printers & net-shares
748		:> /etc/cups/printers.conf
749		:> /etc/samba/smb.conf
750
751		# remove inetd, cups & smb from init
752		rc-config del inetd &> /dev/null
753		rc-config del cups &> /dev/null
754		rc-config del samba &> /dev/null
755
756		# remove all user settings
757		[ -d ${ALX_UNPRIV_HOME} ] && rm -rf ${ALX_UNPRIV_HOME}
758
759		# remove all ica-sessions
760		find ${ALX_ICA_SESSIONS} -type f -name '*.ica' | xargs rm
761
762		# remove all old nics and modules configs
763		find /etc/conf.d -type f -name 'net.*' | xargs rm
764		find /etc/modules.d -type f -name 'net.*' | xargs rm
765
766		# restore default networking
767		cat ${ALX_SKELETONS}/net/net.eth0 > /etc/conf.d/net.eth0
768
769		echo "I am done now, press [Enter] to reboot system ..."
770		else
771		echo "Aborted, press [Enter] to reboot system ..."
772		fi
773		read
774		reboot
775		}
776
777		onboot_interface_list()
778		{
779		local file
780		local devices
781		local iface
782
783		# get list of all devices
784		for file in $@
785		do
786		if [[ $(read_value ONBOOT ${file}) = yes ]]
787		then
788		iface="$(basename ${file} | sed s/net.//)"
789		# exclude backup files
790		case "${iface}" in
791		*~) ;;
792		*) devices="${devices} $(basename ${file} | sed s/net.//)" ;;
793		esac
794		fi
795		done
796
797		echo "${devices}"
798		}
799
800		# read values from net.* files
801		read_value()
802		{
803		local var="$1"
804		local file="$2"
805		local value
806
807		# local all possible vars
808		# global
809		local ONBOOT
810		local NETWORKING
811
812		# static
813		local IP
814		local NETMASK
815		local BROADCAST
816		local NETWORKING
817		local FORCE_MAC_TO
818
819		# dhcp
820		local DHCP_PROG
821		local DHCP_START
822		local DHCP_STOP
823
824		# default gw
825		local GATEWAY
826		local GATEWAY_IF
827
828		# wireless extensions
829		local WIRELESS_AP
830		local WIRELESS_AUTH_MODE
831		local WIRELESS_BITRATE
832		local WIRELESS_CHANNEL
833		local WIRELESS_DEFAULT_KEY
834		local WIRELESS_ESSID
835		local WIRELESS_FREQUENCY
836		local WIRELESS_KEY
837		local WIRELESS_KEY_ASCII
838		local WIRELESS_KEY_0
839		local WIRELESS_KEY_1
840		local WIRELESS_KEY_2
841		local WIRELESS_KEY_3
842		local WIRELESS_KEY_LENGTH
843		local WIRELESS_MODE
844		local WIRELESS_NICK
845		local WIRELESS_NWID
846		local WIRELESS_POWER
847
848		source ${file}
849		eval value=\$$(echo ${var})
850		echo "${value}"
851		}
852
853	case $1 in	case $1 in
854	start)	start)
855	#retrieve or validate current serial	# check for global overrides
856		[ -f ${SETTINGSPATH}/confd-networking ] && ALX_CONFD_NETWORKING=true
857		[ -f /hardware-auto-detection ] && ALX_FORCED_RECHECK=true
858		read_cmdline hardware-auto-detection && ALX_FORCED_RECHECK=true
859		read_cmdline alx-reset-settings && ALX_RESET_SETTINGS=true
860
861		# kill all settings if requested
862		if [[ ${ALX_RESET_SETTINGS} = true ]]
863		then
864		reset_system_settings
865		fi
866
867		# retrieve or validate current serial
868	get_system_serial	get_system_serial
869	if [ "${ALX_HW_DETECT}" == "true" ]	if [[ ${ALX_HW_DETECT} = true ]]
870	then	then
871	import_settings_to_db	if [[ ${ALX_FORCED_RECHECK} = true ]]
872		then
873		update_settings_in_db
874		else
875		import_settings_to_db
876		fi
877	import_settings_local	import_settings_local
878
879		# here we should also exchange the ssh keys
880		# or the system cannot be rebooted after
881		# the first start via the alx-webadmin
882		config_ssh_auth
883	fi	fi
	#now setup system configuration
	#alx_setup_or_whatever_it_will_be_called()
	[ "${ALX_HW_DETECT}" == "false" ] && update_system_settings
884
885	#stop at last the preliminary networking (dhcp)	# now setup system configuration
886		# alx_setup_or_whatever_it_will_be_called()
887		[[ ${ALX_HW_DETECT} = false ]] && update_system_settings
888
889		# stop at last the preliminary networking (dhcp)
890	preliminary_network stop	preliminary_network stop
891	;;	;;
892
893	stop)	stop)
894	#unset_alx_connected #--> now in alxsetstate-rc6	# unset_alx_connected #--> now in alxsetstate-rc6
895	# ! important !: del systemstate	# ! important !: del systemstate
896	[ -f /etc/alx-config/state/state ] && rm /etc/alx-config/state/state	[ -f /etc/alxconfig-ng/state/state ] && rm /etc/alxconfig-ng/state/state
897	sleep 0.1	sleep 0.1
898	;;	;;
899	*)	*)
900	echo "Usage: $0 {start|stop} ..."	echo "Usage: $0 {start|stop} ..."
901	;;	;;
902	esac	esac
903

---

Colored Diff Long Colored Diff Full Colored Diff Unidiff Context Diff Side by Side

Legend: Removed from v.221   changed lines   Added in v.368