1 |
#!/bin/bash |
#!/bin/bash |
2 |
|
# $Id$ |
3 |
# <niro@magellan-linux.de> |
# <niro@magellan-linux.de> |
4 |
|
|
5 |
#%rlevels: 7:s 0:k 6:k |
#%rlevels: 7:s 0:k |
6 |
#%start: 41 |
#%start: 41 |
7 |
#%stop: 01 |
#%stop: 01 |
8 |
|
|
11 |
#%before: |
#%before: |
12 |
#%after: |
#%after: |
13 |
|
|
|
# $Header: /home/cvsd/alx-cvs/alx-src/alxconfig-ng/init.d/alxsettings,v 1.14 2005-07-10 17:55:03 niro Exp $ |
|
|
|
|
14 |
# checks first if the client was already configured and if it has an valid serial |
# checks first if the client was already configured and if it has an valid serial |
15 |
# if not it runs the autoconfiguration script |
# if not it runs the autoconfiguration script |
16 |
# these settings will be used for client setup |
# these settings will be used for client setup |
19 |
# if no changes are at server side they will be kept, if yes the get updated. |
# if no changes are at server side they will be kept, if yes the get updated. |
20 |
# the server settings has higher priority. |
# the server settings has higher priority. |
21 |
|
|
22 |
source /etc/sysconfig/rc |
source /etc/conf.d/rc |
23 |
source $rc_functions |
source $rc_functions |
24 |
|
|
25 |
#mysql settings |
# mysql settings |
26 |
source /etc/alxconfig-ng/config.rc |
source /etc/alxconfig-ng/config.rc |
27 |
|
|
28 |
|
# helper functions |
29 |
|
source /usr/lib/alxconfig-ng/functions/common |
30 |
source /usr/lib/alxconfig-ng/functions/mysqlfunctions |
source /usr/lib/alxconfig-ng/functions/mysqlfunctions |
31 |
source /usr/lib/alxconfig-ng/functions/serial_functions |
source /usr/lib/alxconfig-ng/functions/serial_functions |
32 |
source /usr/lib/alxconfig-ng/functions/config_modules |
source /usr/lib/alxconfig-ng/functions/config_modules |
36 |
source /usr/lib/alxconfig-ng/functions/config_x11 |
source /usr/lib/alxconfig-ng/functions/config_x11 |
37 |
source /usr/lib/alxconfig-ng/functions/config_auth |
source /usr/lib/alxconfig-ng/functions/config_auth |
38 |
source /usr/lib/alxconfig-ng/functions/config_ssh_auth |
source /usr/lib/alxconfig-ng/functions/config_ssh_auth |
39 |
|
source /usr/lib/alxconfig-ng/functions/config_versions |
40 |
|
|
41 |
#check if mysql is available |
# other needed vars |
|
[ -x /usr/bin/mysql ] && MYSQL_ALX=true |
|
|
|
|
|
#other needed vars |
|
42 |
ALX_HW_DETECT=false |
ALX_HW_DETECT=false |
43 |
|
ALX_FORCED_RECHECK=false |
44 |
|
ALX_RESET_SETTINGS=false |
45 |
|
ALX_CONFD_NETWORKING=false |
46 |
|
|
47 |
#unset vars which may kill us |
# unset vars which may kill us |
48 |
unset ALX_SERIAL ALX_STATE |
unset ALX_SERIAL ALX_STATE |
49 |
|
|
50 |
|
|
51 |
#setup needed directories |
# setup needed directories |
52 |
[ ! -d /etc/alxconfig-ng/state ] && install -d /etc/alxconfig-ng/state |
[ ! -d /etc/alxconfig-ng/state ] && install -d /etc/alxconfig-ng/state |
53 |
|
|
54 |
|
|
55 |
update_system_settings(){ |
# read_cmdline ${item} |
56 |
|
read_cmdline() |
57 |
|
{ |
58 |
|
local i |
59 |
|
|
60 |
|
for i in $(< /proc/cmdline) |
61 |
|
do |
62 |
|
[[ ${i} = $1 ]] && return 0 |
63 |
|
done |
64 |
|
|
65 |
|
return 1 |
66 |
|
} |
67 |
|
|
68 |
|
update_system_settings() |
69 |
|
{ |
70 |
echo -e ${COLMAGENTA}"Checking system setup ..."${COLDEFAULT} |
echo -e ${COLMAGENTA}"Checking system setup ..."${COLDEFAULT} |
71 |
|
|
72 |
# get the modules settings |
# get the modules settings |
90 |
|
|
91 |
# exchange ssh rsa keys |
# exchange ssh rsa keys |
92 |
HOME=/root config_ssh_auth |
HOME=/root config_ssh_auth |
93 |
|
|
94 |
|
# import version info |
95 |
|
config_version |
96 |
} |
} |
97 |
|
|
98 |
get_system_serial(){ |
get_system_serial() |
99 |
|
{ |
100 |
|
local CUR_IP CUR_MAC CUR_MTIME ALX_IFACE |
101 |
|
|
102 |
local CUR_IP CUR_MAC CUR_MTIME |
if [[ ${ALX_CONFD_NETWORKING} = true ]] |
103 |
|
then |
104 |
|
ALX_IFACE="$(< ${SETTINGSPATH}/confd-networking)" |
105 |
|
else |
106 |
|
ALX_IFACE="eth0" |
107 |
|
fi |
108 |
|
|
109 |
#check if serial file exists |
# check if serial file exists |
110 |
if [ -f /etc/alxconfig-ng/serial ] |
if [ -f /etc/alxconfig-ng/serial ] && [[ ${ALX_FORCED_RECHECK} = false ]] |
111 |
then |
then |
112 |
source /etc/alxconfig-ng/serial |
source /etc/alxconfig-ng/serial |
113 |
|
|
114 |
#start preliminary networking (dhcp) |
# start preliminary networking (dhcp) |
115 |
preliminary_network start |
preliminary_network start |
116 |
|
|
117 |
CUR_IP=$(/sbin/ifconfig eth0 | sed -n '/addr:/s/ [^r]*..//gp') |
# check if mysql server is reachable |
118 |
CUR_MAC=$(/sbin/ifconfig eth0 | grep HWaddr | cut -d ' ' -f11) |
# if not abort this script |
119 |
|
if ! reach_mysql_server |
120 |
|
then |
121 |
|
preliminary_network stop |
122 |
|
exit 1 |
123 |
|
fi |
124 |
|
|
125 |
|
CUR_IP=$(ifconfig ${ALX_IFACE} | sed -n '/addr:/s/ [^r]*..//gp') |
126 |
|
CUR_MAC=$(ifconfig ${ALX_IFACE} | grep HWaddr | cut -d ' ' -f11) |
127 |
CUR_MTIME=$(date +%s) |
CUR_MTIME=$(date +%s) |
128 |
|
|
129 |
echo -e ${COLOREDSTAR} "Trying to validate my serial ..." |
echo -e ${COLOREDSTAR} "Trying to validate my serial ..." |
130 |
|
|
131 |
#nice serial output |
# nice serial output |
132 |
$CURS_UP |
$CURS_UP |
133 |
$SET_WCOL |
$SET_WCOL |
134 |
echo "[ SN: ${ALX_SERIAL} ]" |
echo "[ SN: ${ALX_SERIAL} ]" |
137 |
then |
then |
138 |
ALX_STATE="ok" |
ALX_STATE="ok" |
139 |
else |
else |
140 |
|
# abort on non valid serial |
141 |
ALX_STATE="invalid serial" |
ALX_STATE="invalid serial" |
142 |
|
echo "ALX_STATE=\"${ALX_STATE}\"" > /etc/alxconfig-ng/state/state |
143 |
|
show_invalid_serial_msg |
144 |
|
exit 1 |
145 |
fi |
fi |
146 |
|
|
147 |
else |
else |
148 |
#run hardware detection |
# run hardware detection |
149 |
echo |
echo |
150 |
echo -e ${COLMAGENTA}"Preparing system for first boot"${COLDEFAULT} |
if [[ ${ALX_FORCED_RECHECK} = true ]] |
151 |
|
then |
152 |
|
echo -e ${COLMAGENTA}"Hardware autodetection forced by system-administrator"${COLDEFAULT} |
153 |
|
# always disable CONFD_NETWORKING here |
154 |
|
export ALX_CONFD_NETWORKING="false" |
155 |
|
else |
156 |
|
echo -e ${COLMAGENTA}"Preparing system for first boot"${COLDEFAULT} |
157 |
|
fi |
158 |
ALX_HW_DETECT=true |
ALX_HW_DETECT=true |
159 |
/etc/init.d/hwdetect start |
hwsetup |
160 |
|
|
161 |
#set hostname to alx_default_hostname |
# set hostname to alx_default_hostname |
162 |
|
# use old hostname if this is a forced re-check |
163 |
|
[[ ${ALX_FORCED_RECHECK} = true ]] && ALX_DEFAULT_HOSTNAME="$(< /etc/hostname)" |
164 |
[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx |
[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx |
165 |
HOSTNAME="${ALX_DEFAULT_HOSTNAME}" |
HOSTNAME="${ALX_DEFAULT_HOSTNAME}" |
166 |
|
|
167 |
#update the hostname on the system for sure |
# update the hostname on the system for sure |
168 |
echo "${HOSTNAME}" > /etc/hostname |
echo "${HOSTNAME}" > /etc/hostname |
169 |
|
|
170 |
#start preliminary networking (dhcp) |
# start preliminary networking (dhcp) |
171 |
preliminary_network start |
preliminary_network start |
172 |
|
|
173 |
|
# check if mysql server is reachable |
174 |
|
# if not abort this script |
175 |
|
if ! reach_mysql_server |
176 |
|
then |
177 |
|
preliminary_network stop |
178 |
|
exit 1 |
179 |
|
fi |
180 |
|
|
181 |
|
|
182 |
CUR_IP=$(/sbin/ifconfig eth0 | sed -n '/addr:/s/ [^r]*..//gp') |
CUR_IP=$(/sbin/ifconfig eth0 | sed -n '/addr:/s/ [^r]*..//gp') |
183 |
CUR_MAC=$(/sbin/ifconfig eth0 | grep HWaddr | cut -d ' ' -f11) |
CUR_MAC=$(/sbin/ifconfig eth0 | grep HWaddr | cut -d ' ' -f11) |
184 |
CUR_MTIME=$(date +%s) |
CUR_MTIME=$(date +%s) |
185 |
|
|
186 |
echo -e ${COLOREDSTAR} "Trying to get new serial ..." |
# abort now if this is a forced re-check |
187 |
|
if [[ ${ALX_FORCED_RECHECK} = true ]] |
188 |
|
then |
189 |
|
# but first check the serial |
190 |
|
source /etc/alxconfig-ng/serial |
191 |
|
|
192 |
#request new serial |
echo -e ${COLOREDSTAR} "Trying to validate my serial ..." |
|
#ALX_REG_DATE="$(date +%F)" |
|
193 |
|
|
194 |
#we're using the mtime now (better for vaildating the serial) |
# nice serial output |
195 |
mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \ |
$CURS_UP |
196 |
"insert into client_serials( |
$SET_WCOL |
197 |
mtime, |
echo "[ SN: ${ALX_SERIAL} ]" |
198 |
mac |
|
199 |
) |
if validate_serial "${ALX_SERIAL}" "${ALX_REG_DATE}" "${CUR_MAC}" |
200 |
values( |
then |
201 |
'${CUR_MTIME}', |
ALX_STATE="ok" |
202 |
'${CUR_MAC}' |
else |
203 |
);" |
# abort on non valid serial |
204 |
|
ALX_STATE="invalid serial" |
205 |
|
echo "ALX_STATE=${ALX_STATE}" > /etc/alxconfig-ng/state/state |
206 |
|
show_invalid_serial_msg |
207 |
|
exit 1 |
208 |
|
fi |
209 |
|
|
210 |
#then validate and retrieve serial |
# write current state to temp file |
211 |
|
echo "ALX_STATE=\"${ALX_STATE}\"" > /etc/alxconfig-ng/state/state |
212 |
|
[ -f /hardware-auto-detection ] && rm /hardware-auto-detection |
213 |
|
|
214 |
|
# now export ALX_FORCED_RECHECK=true |
215 |
|
# that the setting will be updated not inserted ! |
216 |
|
export ALX_FORCED_RECHECK=true |
217 |
|
return 0 |
218 |
|
fi |
219 |
|
|
220 |
### warning must be changed that only the LAST ID will be fetched, ### |
echo -e ${COLOREDSTAR} "Trying to get new serial ..." |
|
### or you get error if the computer name and date are the same ### |
|
|
### you have more than one serial number then ### |
|
221 |
|
|
222 |
#select highest id only (added max) |
# request a new serial; one command now (cause must be done in the same session) |
223 |
ALX_SERIAL=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \ |
ALX_SERIAL=$(mysqldo "insert into client_serials (mtime, mac) values('${CUR_MTIME}','${CUR_MAC}'); |
224 |
"select max(serial) from client_serials where mtime='${CUR_MTIME}' and mac='${CUR_MAC}'") |
select last_insert_id();") |
225 |
|
|
226 |
if [ "${ALX_SERIAL}" != NULL ] |
if [[ ${ALX_SERIAL} != NULL ]] |
227 |
then |
then |
228 |
#nice serial output |
# nice serial output |
229 |
$CURS_UP |
$CURS_UP |
230 |
$SET_WCOL |
$SET_WCOL |
231 |
echo "[ SN: ${ALX_SERIAL} ]" |
echo "[ SN: ${ALX_SERIAL} ]" |
232 |
|
|
233 |
#set ALX_STATE to ok so everybody that everything was ok |
# set ALX_STATE to ok so everybody knows that everything was ok |
234 |
ALX_STATE=ok |
ALX_STATE=ok |
235 |
|
|
236 |
echo "ALX_SERIAL=${ALX_SERIAL}" > /etc/alxconfig-ng/serial |
echo "ALX_SERIAL=\"${ALX_SERIAL}\"" > /etc/alxconfig-ng/serial |
237 |
echo "ALX_REG_DATE=${CUR_MTIME}" >> /etc/alxconfig-ng/serial |
echo "ALX_REG_DATE=\"${CUR_MTIME}\"" >> /etc/alxconfig-ng/serial |
238 |
|
|
239 |
evaluate_retval |
evaluate_retval |
240 |
else |
else |
241 |
#print false (works only if this is the first statement here) |
# print false (works only if this is the first statement here) |
242 |
evaluate_retval |
evaluate_retval |
243 |
|
|
244 |
#set ALX_STATE to error so everybody sees there was an error |
# set ALX_STATE to error so everybody sees there was an error |
245 |
ALX_STATE=error |
ALX_STATE=error |
246 |
|
|
247 |
#show an error that no new serial was found |
# show an error that no new serial was found |
248 |
#nice serial output |
# nice serial output |
249 |
$CURS_UP |
$CURS_UP |
250 |
$SET_WCOL |
$SET_WCOL |
251 |
echo -e "[ SN: ${COLRED}None, 0${COLDEFAULT} ]" |
echo -e "[ SN: ${COLRED}None, 0${COLDEFAULT} ]" |
252 |
fi |
fi |
253 |
fi |
fi |
254 |
|
|
255 |
#write current state to temp file |
# write current state to temp file |
256 |
echo "ALX_STATE=${ALX_STATE}" > /etc/alxconfig-ng/state/state |
echo "ALX_STATE=\"${ALX_STATE}\"" > /etc/alxconfig-ng/state/state |
257 |
|
echo "ALX_IFACE=\"${ALX_IFACE}\"" >> /etc/alxconfig-ng/state/state |
258 |
} |
} |
259 |
|
|
260 |
|
|
261 |
check_is_configured() { |
check_is_configured() |
262 |
|
{ |
263 |
if [ -f /etc/alxconfig-ng/state/configured ] |
if [ -f /etc/alxconfig-ng/state/configured ] |
264 |
then |
then |
265 |
export ALX_CONFIGURED=true |
export ALX_CONFIGURED=true |
270 |
|
|
271 |
|
|
272 |
# imports current settings to the database resolved by the hardware detection |
# imports current settings to the database resolved by the hardware detection |
273 |
import_settings_to_db() { |
import_settings_to_db() |
274 |
#note: networking is always 'dhcp' if hw was autodetected |
{ |
275 |
#note: default_domain/hostname is set in config.rc |
# note: networking is always 'dhcp' if hw was autodetected |
276 |
|
# note: default_domain/hostname is set in config.rc |
277 |
|
|
278 |
#to be safe, we do some sanity checks |
# to be safe, we do some sanity checks |
279 |
[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain |
[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain |
280 |
[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx |
[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx |
281 |
|
|
282 |
#vars used by hwdetect |
# vars used by hwsetup |
283 |
local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME |
local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME |
284 |
local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER |
local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER |
285 |
local MOUSETYPE XMOUSETYPE FULLNAME DEVICE |
local MOUSETYPE XMOUSETYPE FULLNAME DEVICE |
286 |
|
|
287 |
#get setting from hwdetect |
# get setting from hwsetup |
288 |
source /etc/sysconfig/hwsetup/knoppix |
source /etc/conf.d/hwsetup/knoppix |
289 |
source /etc/sysconfig/hwsetup/mouse |
source /etc/conf.d/hwsetup/mouse |
290 |
|
|
291 |
echo |
echo |
292 |
echo -e ${COLMAGENTA}"Importing detected settings to database"${COLDEFAULT} |
echo -e ${COLMAGENTA}"Importing detected settings to database"${COLDEFAULT} |
293 |
|
|
294 |
#network |
# network |
295 |
echo -e " Network settings ..." |
echo -e " Network settings ..." |
296 |
mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \ |
if [[ ${ALX_CONFD_NETWORKING} = true ]] |
297 |
"insert into cfg_network( |
then |
298 |
hostname, |
# get settings |
299 |
serial, |
#source ${rc_base}/init.d/network &> /dev/null |
300 |
module, |
for iface in $(onboot_interface_list ${network_settings}/net.*) |
301 |
domain, |
do |
302 |
networking |
[[ $(< ${SETTINGSPATH}/confd-networking) != ${iface} ]] && continue |
303 |
) |
echo "WARNING: only importing settings for interface [ ${iface} ] !" |
304 |
values( |
source ${network_settings}/net.${iface} || exit 1 |
305 |
'${ALX_DEFAULT_HOSTNAME}', |
NETCARD_DRIVER="$(cat /etc/modprobe.d/net.${iface}.conf | cut -d' ' -f3)" |
306 |
'${ALX_SERIAL}', |
|
307 |
'${NETCARD_DRIVER}', |
mysqldo "insert into cfg_network( |
308 |
'${ALX_DEFAULT_DOMAIN}', |
hostname, |
309 |
'dhcp' |
serial, |
310 |
);" |
module, |
311 |
|
domain, |
312 |
|
networking, |
313 |
|
netmask, |
314 |
|
dns, |
315 |
|
gateway, |
316 |
|
broadcast, |
317 |
|
ip, |
318 |
|
forcemacto, |
319 |
|
wireless_bitrate, |
320 |
|
wireless_channel, |
321 |
|
wireless_essid, |
322 |
|
wireless_frequency, |
323 |
|
wireless_mode, |
324 |
|
wireless_nick, |
325 |
|
wireless_auth_mode, |
326 |
|
wireless_key_length, |
327 |
|
wireless_key, |
328 |
|
wireless_key_ascii |
329 |
|
) |
330 |
|
values( |
331 |
|
'${ALX_DEFAULT_HOSTNAME}', |
332 |
|
'${ALX_SERIAL}', |
333 |
|
'${NETCARD_DRIVER}', |
334 |
|
'${ALX_DEFAULT_DOMAIN}', |
335 |
|
'${NETWORKING}', |
336 |
|
'${NETMASK}', |
337 |
|
'${NAMESERVER}', |
338 |
|
'${GATEWAY}', |
339 |
|
'${BROADCAST}', |
340 |
|
'${IP}', |
341 |
|
'${FORCE_MAC_TO}', |
342 |
|
'${WIRELESS_BITRATE}', |
343 |
|
'${WIRELESS_CHANNEL}', |
344 |
|
'${WIRELESS_ESSID}', |
345 |
|
'${WIRELESS_FREQUENCY}', |
346 |
|
'${WIRELESS_MODE}', |
347 |
|
'${WIRELESS_NICK}', |
348 |
|
'${WIRELESS_AUTH_MODE}', |
349 |
|
'${WIRELESS_KEY_LENGTH}', |
350 |
|
'${WIRELESS_KEY}', |
351 |
|
'${WIRELESS_KEY_ASCII}' |
352 |
|
);" |
353 |
|
|
354 |
|
# only insert the *FIRST* iface |
355 |
|
break |
356 |
|
done |
357 |
|
else |
358 |
|
mysqldo "insert into cfg_network( |
359 |
|
hostname, |
360 |
|
serial, |
361 |
|
module, |
362 |
|
domain, |
363 |
|
networking |
364 |
|
) |
365 |
|
values( |
366 |
|
'${ALX_DEFAULT_HOSTNAME}', |
367 |
|
'${ALX_SERIAL}', |
368 |
|
'${NETCARD_DRIVER}', |
369 |
|
'${ALX_DEFAULT_DOMAIN}', |
370 |
|
'dhcp' |
371 |
|
);" |
372 |
|
fi |
373 |
evaluate_retval |
evaluate_retval |
374 |
|
|
375 |
#xserver |
# xserver |
376 |
echo -e " Graphic settings ..." |
echo -e " Graphic settings ..." |
377 |
#xserver general |
# xserver general |
378 |
( mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \ |
( mysqldo "insert into cfg_graphic( |
|
"insert into cfg_graphic( |
|
379 |
serial, |
serial, |
380 |
module, |
module, |
381 |
resolution, |
resolution, |
382 |
depth, |
depth, |
383 |
monitorid |
refresh_rate |
384 |
) |
) |
385 |
values( |
values( |
386 |
'${ALX_SERIAL}', |
'${ALX_SERIAL}', |
387 |
'${XMODULE}', |
'${XMODULE}', |
388 |
'1024x768', |
'1024x768', |
389 |
'16', |
'16', |
390 |
'0' |
'60' |
391 |
);"; ) |
);"; ) |
392 |
evaluate_retval |
evaluate_retval |
393 |
|
|
394 |
# input |
# input |
395 |
echo -e " Input settings ..." |
echo -e " Input settings ..." |
396 |
mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \ |
mysqldo "insert into cfg_input(serial,mouse) values('${ALX_SERIAL}','${XMOUSETYPE}');" |
|
"insert into cfg_input(serial,mouse) values('${ALX_SERIAL}','${XMOUSETYPE}');" |
|
397 |
evaluate_retval |
evaluate_retval |
398 |
|
|
399 |
# auth |
# auth |
400 |
echo -e " Authentifcation settings ..." |
echo -e " Authentification settings ..." |
401 |
mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \ |
mysqldo "insert into client_auth( |
|
"insert into client_auth( |
|
402 |
serial, |
serial, |
403 |
username, |
username, |
404 |
shell, |
shell, |
418 |
|
|
419 |
# exchange ssh rsa keys - the first boot needs this ! |
# exchange ssh rsa keys - the first boot needs this ! |
420 |
# or no reboot will work via the webadmin |
# or no reboot will work via the webadmin |
421 |
echo -e " SSH authentifcation settings ..." |
echo -e " SSH authentification settings ..." |
422 |
HOME=/root config_ssh_auth |
HOME=/root config_ssh_auth |
423 |
evaluate_retval |
evaluate_retval |
424 |
|
|
425 |
# input |
# autostart |
426 |
echo -e " Autostart settings ..." |
echo -e " Autostart settings ..." |
427 |
mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \ |
mysqldo "insert into cfg_autostart(serial,session) values('${ALX_SERIAL}','');" |
428 |
"insert into cfg_autostart(serial,session) values('${ALX_SERIAL}','');" |
|
429 |
|
# screensaver |
430 |
|
echo -e " Screensaver settings ..." |
431 |
|
mysqldo "insert into cfg_screensaver(serial,screensaver) values('${ALX_SERIAL}','')" |
432 |
|
|
433 |
|
# version info |
434 |
|
local alx_os |
435 |
|
local alx_utils |
436 |
|
alx_os="$(< /etc/mageversion)" |
437 |
|
alx_utils="$(magequery -n alxconfig-ng-alx | sed 's:.*\[\ \(.*\)\ \].*:\1:')" |
438 |
|
alx_utils="${alx_utils/alxconfig-ng-alx-}" |
439 |
|
mysqldo "insert into client_version(serial,os,utils) values('${ALX_SERIAL}','${alx_os}','${alx_utils}')" |
440 |
|
|
441 |
evaluate_retval |
evaluate_retval |
442 |
} |
} |
443 |
|
|
444 |
|
# imports current settings to the database resolved by the hardware detection |
445 |
|
update_settings_in_db() |
446 |
|
{ |
447 |
|
# note: networking is always 'dhcp' if hw was autodetected |
448 |
|
# note: default_domain/hostname is set in config.rc or exported |
449 |
|
# note: we updating only hardware settings here ! |
450 |
|
|
451 |
|
# to be safe, we do some sanity checks |
452 |
|
[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain |
453 |
|
[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx |
454 |
|
|
455 |
|
# vars used by hwsetup |
456 |
|
local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME |
457 |
|
local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER |
458 |
|
local MOUSETYPE XMOUSETYPE FULLNAME DEVICE |
459 |
|
|
460 |
|
# get setting from hwsetup |
461 |
|
source /etc/conf.d/hwsetup/knoppix |
462 |
|
source /etc/conf.d/hwsetup/mouse |
463 |
|
|
464 |
|
echo |
465 |
|
echo -e ${COLMAGENTA}"Updating detected settings in database"${COLDEFAULT} |
466 |
|
|
467 |
|
# network |
468 |
|
echo -e " Network settings ..." |
469 |
|
if [[ ${ALX_CONFD_NETWORKING} = true ]] |
470 |
|
then |
471 |
|
# get settings |
472 |
|
#source ${rc_base}/init.d/network &> /dev/null |
473 |
|
for iface in $(onboot_interface_list ${network_settings}/net.*) |
474 |
|
do |
475 |
|
[[ $(< ${SETTINGSPATH}/confd-networking) != ${iface} ]] && continue |
476 |
|
echo "WARNING: only importing settings for interface [ ${iface} ] !" |
477 |
|
source ${network_settings}/net.${iface} || exit 1 |
478 |
|
NETCARD_DRIVER="$(cat /etc/modprobe.d/net.${iface}.conf | cut -d' ' -f3)" |
479 |
|
|
480 |
|
mysqldo "update cfg_network set |
481 |
|
hostname='${ALX_DEFAULT_HOSTNAME}', |
482 |
|
module='${NETCARD_DRIVER}', |
483 |
|
domain='${ALX_DEFAULT_DOMAIN}', |
484 |
|
networking='${NETWORKING}', |
485 |
|
netmask='${NETMASK}', |
486 |
|
dns='${NAMESERVER}', |
487 |
|
gateway='${GATEWAY}', |
488 |
|
broadcast='${BROADCAST}', |
489 |
|
ip='${IP}', |
490 |
|
forcemacto='${FORCE_MAC_TO}', |
491 |
|
wireless_bitrate='${WIRELESS_BITRATE}', |
492 |
|
wireless_channel='${WIRELESS_CHANNEL}', |
493 |
|
wireless_essid='${WIRELESS_ESSID}', |
494 |
|
wireless_frequency='${WIRELESS_FREQUENCY}', |
495 |
|
wireless_mode='${WIRELESS_MODE}', |
496 |
|
wireless_nick='${WIRELESS_NICK}', |
497 |
|
wireless_auth_mode='${WIRELESS_AUTH_MODE}', |
498 |
|
wireless_key_length='${WIRELESS_KEY_LENGTH}', |
499 |
|
wireless_key='${WIRELESS_KEY}', |
500 |
|
wireless_key_ascii='${WIRELESS_KEY_ASCII}' |
501 |
|
where serial=${ALX_SERIAL};" |
502 |
|
|
503 |
|
# only insert the *FIRST* iface |
504 |
|
break |
505 |
|
done |
506 |
|
else |
507 |
|
mysqldo "update cfg_network set |
508 |
|
hostname='${ALX_DEFAULT_HOSTNAME}', |
509 |
|
module='${NETCARD_DRIVER}', |
510 |
|
domain='${ALX_DEFAULT_DOMAIN}', |
511 |
|
networking='dhcp' |
512 |
|
where serial=${ALX_SERIAL};" |
513 |
|
fi |
514 |
|
evaluate_retval |
515 |
|
|
516 |
|
# xserver |
517 |
|
echo -e " Graphic settings ..." |
518 |
|
# xserver general |
519 |
|
mysqldo "update cfg_graphic set |
520 |
|
module='${XMODULE}', |
521 |
|
resolution='1024x768', |
522 |
|
depth='16', |
523 |
|
refresh_rate='60' |
524 |
|
where serial=${ALX_SERIAL};" |
525 |
|
evaluate_retval |
526 |
|
|
527 |
|
# input |
528 |
|
echo -e " Input settings ..." |
529 |
|
mysqldo "update cfg_input set mouse='${XMOUSETYPE}' where serial=${ALX_SERIAL};" |
530 |
|
evaluate_retval |
531 |
|
|
532 |
|
# version info |
533 |
|
local alx_os |
534 |
|
local alx_utils |
535 |
|
alx_os="$(< /etc/mageversion)" |
536 |
|
alx_utils="$(magequery -n alxconfig-ng-alx | sed 's:.*\[\ \(.*\)\ \].*:\1:')" |
537 |
|
alx_utils="${alx_utils/alxconfig-ng-alx-}" |
538 |
|
mysqldo "update client_version set os='${alx_os}', utils='${alx_utils}' where serial=${ALX_SERIAL};" |
539 |
|
} |
540 |
|
|
541 |
# imports current settings to the local system resolved by the hardware detection |
# imports current settings to the local system resolved by the hardware detection |
542 |
# we only need the network settings |
# we only need the network settings |
543 |
import_settings_local(){ |
import_settings_local() |
544 |
#note: networking is always 'dhcp' if hw was autodetected |
{ |
545 |
#note: default_domain/hostname is set in config.rc |
# note: networking is always 'dhcp' if hw was autodetected |
546 |
|
# note: default_domain/hostname is set in config.rc |
547 |
|
|
548 |
#to be safe, we do some sanity checks |
# to be safe, we do some sanity checks |
549 |
[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain |
[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain |
550 |
[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx |
[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx |
551 |
|
|
552 |
#vars used by hwdetect |
# vars used by hwsetup |
553 |
local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME |
local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME |
554 |
local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER |
local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER |
555 |
local MOUSETYPE XMOUSETYPE FULLNAME DEVICE |
local MOUSETYPE XMOUSETYPE FULLNAME DEVICE |
556 |
|
|
557 |
#get setting from hwdetect |
# get setting from hwsetup |
558 |
source /etc/sysconfig/hwsetup/knoppix |
source /etc/conf.d/hwsetup/knoppix |
559 |
|
|
560 |
echo |
echo |
561 |
echo -e ${COLMAGENTA}"Importing detected settings to local system"${COLDEFAULT} |
echo -e ${COLMAGENTA}"Importing detected settings to local system"${COLDEFAULT} |
562 |
|
|
563 |
[ ! -d ${SETTINGSPATH} ] && install -d ${SETTINGSPATH} |
if [[ ${ALX_CONFD_NETWORKING} = false ]] |
564 |
echo "${NETCARD_DRIVER}" > ${SETTINGSPATH}/modules |
then |
565 |
evaluate_retval |
# set an device alias for modprobe.conf |
566 |
|
[ ! -d /etc/modprobe.d ] && install -d /etc/modprobe.d |
567 |
|
echo "alias eth0 ${NETCARD_DRIVER}" > /etc/modprobe.d/net.eth0.conf |
568 |
|
|
569 |
|
# regenerate modprobe.conf |
570 |
|
[ -x $(which modules-update) ] && modules-update || echo "cannot regen modprobe.conf" |
571 |
|
evaluate_retval |
572 |
|
fi |
573 |
|
|
574 |
#set system state to 'already configured' |
# set system state to 'already configured' |
575 |
touch /etc/alxconfig-ng/state/configured |
touch /etc/alxconfig-ng/state/configured |
576 |
|
|
577 |
|
# install slim desktopmanager configuration |
578 |
|
config_display_manager |
579 |
|
|
580 |
|
# if only an recheck was forced than abort now |
581 |
|
[[ ${ALX_FORCED_RECHECK} = true ]] && return 0 |
582 |
|
|
583 |
# create a fresh fluxbox directory |
# create a fresh fluxbox directory |
584 |
[ -d ${ALX_UNPRIV_HOME}/.fluxbox ] && rm -rf ${ALX_UNPRIV_HOME}/.fluxbox |
[ -d ${ALX_UNPRIV_HOME}/.fluxbox ] && rm -rf ${ALX_UNPRIV_HOME}/.fluxbox |
585 |
install -d ${ALX_UNPRIV_HOME}/.fluxbox |
install -d ${ALX_UNPRIV_HOME}/.fluxbox |
587 |
# now generate fluxbox config files |
# now generate fluxbox config files |
588 |
|
|
589 |
# fluxbox main config |
# fluxbox main config |
590 |
cat ${ALX_SKELETONS}/fluxbox/init \ |
cat ${ALX_SKELETONS}/fluxbox/init > ${ALX_UNPRIV_HOME}/.fluxbox/init |
591 |
> ${ALX_UNPRIV_HOME}/.fluxbox/init |
|
592 |
|
# fluxbox autostart |
593 |
|
cat ${ALX_SKELETONS}/fluxbox/apps > ${ALX_UNPRIV_HOME}/.fluxbox/apps |
594 |
|
|
595 |
# fluxbox menu header |
# fluxbox menu header |
596 |
cat ${ALX_SKELETONS}/fluxbox/menu.header \ |
cat ${ALX_SKELETONS}/fluxbox/menu.header > ${ALX_UNPRIV_HOME}/.fluxbox/menu |
597 |
> ${ALX_UNPRIV_HOME}/.fluxbox/menu |
|
598 |
|
# now fix it with proper messages :P |
599 |
|
local ver="$(< /etc/mageversion)" |
600 |
|
sed -i "s:@CHANGEME@:alx-${ver} #${ALX_SERIAL}:g" ${ALX_UNPRIV_HOME}/.fluxbox/menu |
601 |
|
|
602 |
# add a newline (maybe there is no crlf in the header) |
# add a newline (maybe there is no crlf in the header) |
603 |
echo >> ${ALX_UNPRIV_HOME}/.fluxbox/menu |
echo >> ${ALX_UNPRIV_HOME}/.fluxbox/menu |
604 |
|
|
605 |
# fluxbox menu footer |
# fluxbox menu footer |
606 |
cat ${ALX_SKELETONS}/fluxbox/menu.footer \ |
cat ${ALX_SKELETONS}/fluxbox/menu.footer >> ${ALX_UNPRIV_HOME}/.fluxbox/menu |
|
>> ${ALX_UNPRIV_HOME}/.fluxbox/menu |
|
607 |
|
|
608 |
# add a newline (maybe there is no crlf in the footer) |
# add a newline (maybe there is no crlf in the footer) |
609 |
echo >> ${ALX_UNPRIV_HOME}/.fluxbox/menu |
echo >> ${ALX_UNPRIV_HOME}/.fluxbox/menu |
610 |
|
|
611 |
# default passwords are bad |
|
612 |
#usermod -p $(perl -e "printf(crypt('foobar','AD'))") root |
# setup some standart icons (sysinfo.lnk) |
613 |
#usermod -p $(perl -e "printf(crypt('foobar','AD'))") ${ALX_UNPRIV_USER} |
# basic config |
614 |
#smbpasswd -a root foobar |
cat ${ALX_SKELETONS}/xtdesktop/xtdeskrc > ${ALX_UNPRIV_HOME}/.xtdeskrc |
615 |
|
|
616 |
|
# clean desktop icon location |
617 |
|
[ -d ${ALX_UNPRIV_HOME}/.xtdesktop ] && rm -rf ${ALX_UNPRIV_HOME}/.xtdesktop |
618 |
|
install -d ${ALX_UNPRIV_HOME}/.xtdesktop |
619 |
|
|
620 |
|
# last but not least gen a icon with some sys informations |
621 |
|
local sysinfo |
622 |
|
local osversion |
623 |
|
local xres |
624 |
|
local yres |
625 |
|
|
626 |
|
osversion="$(< /etc/mageversion)" |
627 |
|
sysinfo="Hostname: ${ALX_DEFAULT_HOSTNAME} Serial: #${ALX_SERIAL} OS: alx-${osversion} Kernel: $(uname -r)" |
628 |
|
|
629 |
|
# at first boot we got always a resolution of 1024x768-16@60 |
630 |
|
# middle of the screen |
631 |
|
# (no txt - length required, xtdesk manage that itself) |
632 |
|
xres="$((1024 / 2))" |
633 |
|
# default y pos (full yres -22 !) |
634 |
|
yres="$((768 - 22 ))" |
635 |
|
|
636 |
|
generate_icon \ |
637 |
|
--name "${sysinfo}" \ |
638 |
|
--command "exit 0" \ |
639 |
|
--icon "${ALX_SESSIONS_ICONS}/sysinfo.png" \ |
640 |
|
--dest "${ALX_UNPRIV_HOME}/.xtdesktop/sysinfo.lnk" \ |
641 |
|
--xres "${xres}" \ |
642 |
|
--yres "${yres}" \ |
643 |
|
--icon-width "1" \ |
644 |
|
--icon-height "1" |
645 |
|
|
646 |
|
# create a xinitrc |
647 |
|
echo "exec startfluxbox" > ${ALX_UNPRIV_HOME}/.xinitrc |
648 |
|
|
649 |
|
# set correct permissions |
650 |
|
chown ${ALX_UNPRIV_USER}:${ALX_UNPRIV_GROUP} ${ALX_UNPRIV_HOME} |
651 |
|
chown ${ALX_UNPRIV_USER}:${ALX_UNPRIV_GROUP} ${ALX_UNPRIV_HOME}/.fluxbox |
652 |
|
chmod 0755 ${ALX_UNPRIV_HOME}/.fluxbox |
653 |
|
chmod 0755 ${ALX_UNPRIV_HOME}/.xtdesktop |
654 |
|
chmod 0644 ${ALX_UNPRIV_HOME}/.xtdeskrc |
655 |
|
chmod 0644 ${ALX_UNPRIV_HOME}/.xinitrc |
656 |
} |
} |
657 |
|
|
658 |
#start|stop |
# start|stop |
659 |
preliminary_network(){ |
preliminary_network() |
660 |
|
{ |
661 |
local module |
local module |
662 |
|
|
663 |
if [ -f /etc/alxconfig-ng/state/configured ] |
if [ -f /etc/alxconfig-ng/state/configured ] |
664 |
then |
then |
665 |
#get module name |
# compat for old clients |
666 |
module=$(cat ${SETTINGSPATH}/modules) |
if [ -f ${SETTINGSPATH}/modules ] |
667 |
modprobe ${module} |
then |
668 |
|
# get module name |
669 |
|
module=$(cat ${SETTINGSPATH}/modules) |
670 |
|
modprobe ${module} |
671 |
|
fi |
672 |
|
|
673 |
else |
else |
674 |
#vars used by hwdetect |
# vars used by hwsetup |
675 |
local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME |
local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME |
676 |
local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER |
local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER |
677 |
|
|
678 |
#get setting from hwdetect |
# get setting from hwsetup |
679 |
source /etc/sysconfig/hwsetup/knoppix |
source /etc/conf.d/hwsetup/knoppix |
680 |
modprobe ${NETCARD_DRIVER} |
modprobe ${NETCARD_DRIVER} |
681 |
fi |
fi |
682 |
|
|
685 |
# keeping like always safe: |
# keeping like always safe: |
686 |
# no network should be startet here, |
# no network should be startet here, |
687 |
# so we can delete all pid files if one exists |
# so we can delete all pid files if one exists |
688 |
if ps -A|grep dhcpcd > /dev/null |
if [[ ! -z $(pidof udhcpc) ]] |
689 |
then |
then |
690 |
echo -e ${COLMAGENTA}"Forcing network down"${COLDEFAULT} |
echo -e ${COLMAGENTA}"Forcing network down"${COLDEFAULT} |
691 |
dhcpcd -k |
killall udhcpc &> /dev/null |
692 |
sleep 1 |
sleep 1 |
|
else |
|
|
rm -f /var/run/dhcpcd-eth?.pid |
|
693 |
fi |
fi |
694 |
|
[[ ${ALX_CONFD_NETWORKING} = true ]] && ${rc_base}/init.d/network stop |
695 |
|
|
696 |
echo -e ${COLMAGENTA}"Starting preliminary network ... "${COLDEFAULT} |
echo -e ${COLMAGENTA}"Starting preliminary networking ... "${COLDEFAULT} |
|
dhcpcd &> /dev/null |
|
697 |
|
|
698 |
# aka_fix ######################################## |
# start network configured from /etc/conf.d |
699 |
#ifconfig eth0 128.20.222.222 netmask 255.255.0.0 up |
if [[ ${ALX_CONFD_NETWORKING} = true ]] |
700 |
#route del default gw 128.20.50.13 &> /dev/null |
then |
701 |
#route add default gw 128.20.50.21 &> /dev/null |
${rc_base}/init.d/network start |
702 |
#echo "nameserver 128.20.50.21" > /etc/resolv.conf |
else |
703 |
################################################## |
echo -e ${COLOREDSTAR}"Starting default dhcp based networking ... "${COLDEFAULT} |
704 |
|
# -t 10 timeout of 10 secs |
705 |
evaluate_retval |
udhcpc -t 10 &> /dev/null |
706 |
|
evaluate_retval |
707 |
|
fi |
708 |
;; |
;; |
709 |
|
|
710 |
stop) |
stop) |
711 |
echo -e ${COLMAGENTA}"Stopping preliminary network ... "${COLDEFAULT} |
echo -e ${COLMAGENTA}"Stopping preliminary networking ... "${COLDEFAULT} |
712 |
ifconfig eth0 down |
if [[ ${ALX_CONFD_NETWORKING} = true ]] |
713 |
if ps -A|grep dhcpcd > /dev/null |
then |
714 |
|
${rc_base}/init.d/network stop |
715 |
|
else |
716 |
|
echo -e ${COLOREDSTAR}"Stopping default dhcp based networking ... "${COLDEFAULT} |
717 |
|
ifconfig eth0 down |
718 |
|
fi |
719 |
|
if [[ ! -z $(pidof udhcpc) ]] |
720 |
then |
then |
721 |
dhcpcd -z &> /dev/null |
killall udhcpc &> /dev/null |
722 |
|
sleep 1 |
723 |
fi |
fi |
724 |
evaluate_retval |
evaluate_retval |
725 |
;; |
;; |
730 |
esac |
esac |
731 |
} |
} |
732 |
|
|
733 |
|
reset_system_settings() |
734 |
|
{ |
735 |
|
# force load of de kbdkeys |
736 |
|
loadkeys -q de |
737 |
|
echo |
738 |
|
echo -en ${COLRED} |
739 |
|
echo -n "*** Warning: you are about to reset *all* local settings on this system!" |
740 |
|
echo -e ${COLDEFAULT} |
741 |
|
echo "*** Do you really want to continue ?" |
742 |
|
echo -n "*** Enter 'yes' to continue, anything else to abort: " |
743 |
|
read kbinsert |
744 |
|
if [[ ${kbinsert} = yes ]] |
745 |
|
then |
746 |
|
echo -en ${COLRED} |
747 |
|
echo -n "*** OK, you really want it ... killing all settings: " |
748 |
|
for i in 3 2 1 now |
749 |
|
do |
750 |
|
echo -n " ${i}" |
751 |
|
sleep 1 |
752 |
|
done |
753 |
|
echo -e ${COLDEFAULT} |
754 |
|
|
755 |
|
## reset all settings: |
756 |
|
rm -rf ${SETTINGSPATH}/* |
757 |
|
rm -f /etc/alxconfig-ng/serial |
758 |
|
rm -rf /etc/alxconfig-ng/state |
759 |
|
|
760 |
|
# clear all printers & net-shares |
761 |
|
:> /etc/printcap |
762 |
|
|
763 |
|
# remove lprng |
764 |
|
rc-config del lprng &> /dev/null |
765 |
|
|
766 |
|
# remove all user settings |
767 |
|
[ -d ${ALX_UNPRIV_HOME} ] && rm -rf ${ALX_UNPRIV_HOME} |
768 |
|
|
769 |
|
# remove all ica-sessions |
770 |
|
find ${ALX_ICA_SESSIONS} -type f -name '*.ica' | xargs rm |
771 |
|
|
772 |
|
# remove all old nics and modules configs |
773 |
|
find /etc/conf.d -type f -name 'net.*' | xargs rm |
774 |
|
find /etc/modprobe.d -type f -name 'net.*' | xargs rm |
775 |
|
|
776 |
|
# restore default networking |
777 |
|
cat ${ALX_SKELETONS}/net/net.eth0 > /etc/conf.d/net.eth0 |
778 |
|
|
779 |
|
echo "I am done now, press [Enter] to reboot system ..." |
780 |
|
else |
781 |
|
echo "Aborted, press [Enter] to reboot system ..." |
782 |
|
fi |
783 |
|
read |
784 |
|
reboot |
785 |
|
} |
786 |
|
|
787 |
|
onboot_interface_list() |
788 |
|
{ |
789 |
|
local file |
790 |
|
local devices |
791 |
|
local iface |
792 |
|
|
793 |
|
# get list of all devices |
794 |
|
for file in $@ |
795 |
|
do |
796 |
|
if [[ $(read_value ONBOOT ${file}) = yes ]] |
797 |
|
then |
798 |
|
iface="$(basename ${file} | sed s/net.//)" |
799 |
|
# exclude backup files |
800 |
|
case "${iface}" in |
801 |
|
*~) ;; |
802 |
|
*) devices="${devices} $(basename ${file} | sed s/net.//)" ;; |
803 |
|
esac |
804 |
|
fi |
805 |
|
done |
806 |
|
|
807 |
|
echo "${devices}" |
808 |
|
} |
809 |
|
|
810 |
|
# read values from net.* files |
811 |
|
read_value() |
812 |
|
{ |
813 |
|
local var="$1" |
814 |
|
local file="$2" |
815 |
|
local value |
816 |
|
|
817 |
|
# local all possible vars |
818 |
|
# global |
819 |
|
local ONBOOT |
820 |
|
local NETWORKING |
821 |
|
|
822 |
|
# static |
823 |
|
local IP |
824 |
|
local NETMASK |
825 |
|
local BROADCAST |
826 |
|
local NETWORKING |
827 |
|
local FORCE_MAC_TO |
828 |
|
|
829 |
|
# dhcp |
830 |
|
local DHCP_PROG |
831 |
|
local DHCP_START |
832 |
|
local DHCP_STOP |
833 |
|
|
834 |
|
# default gw |
835 |
|
local GATEWAY |
836 |
|
local GATEWAY_IF |
837 |
|
|
838 |
|
# wireless extensions |
839 |
|
local WIRELESS_AP |
840 |
|
local WIRELESS_AUTH_MODE |
841 |
|
local WIRELESS_BITRATE |
842 |
|
local WIRELESS_CHANNEL |
843 |
|
local WIRELESS_DEFAULT_KEY |
844 |
|
local WIRELESS_ESSID |
845 |
|
local WIRELESS_FREQUENCY |
846 |
|
local WIRELESS_KEY |
847 |
|
local WIRELESS_KEY_ASCII |
848 |
|
local WIRELESS_KEY_0 |
849 |
|
local WIRELESS_KEY_1 |
850 |
|
local WIRELESS_KEY_2 |
851 |
|
local WIRELESS_KEY_3 |
852 |
|
local WIRELESS_KEY_LENGTH |
853 |
|
local WIRELESS_MODE |
854 |
|
local WIRELESS_NICK |
855 |
|
local WIRELESS_NWID |
856 |
|
local WIRELESS_POWER |
857 |
|
|
858 |
|
source ${file} |
859 |
|
eval value=\$$(echo ${var}) |
860 |
|
echo "${value}" |
861 |
|
} |
862 |
|
|
863 |
case $1 in |
case $1 in |
864 |
start) |
start) |
865 |
#retrieve or validate current serial |
# check for global overrides |
866 |
|
[ -f ${SETTINGSPATH}/confd-networking ] && ALX_CONFD_NETWORKING=true |
867 |
|
[ -f /hardware-auto-detection ] && ALX_FORCED_RECHECK=true |
868 |
|
read_cmdline hardware-auto-detection && ALX_FORCED_RECHECK=true |
869 |
|
read_cmdline alx-reset-settings && ALX_RESET_SETTINGS=true |
870 |
|
|
871 |
|
# kill all settings if requested |
872 |
|
if [[ ${ALX_RESET_SETTINGS} = true ]] |
873 |
|
then |
874 |
|
reset_system_settings |
875 |
|
fi |
876 |
|
|
877 |
|
# retrieve or validate current serial |
878 |
get_system_serial |
get_system_serial |
879 |
if [ "${ALX_HW_DETECT}" == "true" ] |
if [[ ${ALX_HW_DETECT} = true ]] |
880 |
then |
then |
881 |
import_settings_to_db |
if [[ ${ALX_FORCED_RECHECK} = true ]] |
882 |
|
then |
883 |
|
update_settings_in_db |
884 |
|
else |
885 |
|
import_settings_to_db |
886 |
|
fi |
887 |
import_settings_local |
import_settings_local |
888 |
|
|
889 |
# here we should also exchange the ssh keys |
# here we should also exchange the ssh keys |
892 |
config_ssh_auth |
config_ssh_auth |
893 |
fi |
fi |
894 |
|
|
895 |
#now setup system configuration |
# now setup system configuration |
896 |
#alx_setup_or_whatever_it_will_be_called() |
# alx_setup_or_whatever_it_will_be_called() |
897 |
[ "${ALX_HW_DETECT}" == "false" ] && update_system_settings |
[[ ${ALX_HW_DETECT} = false ]] && update_system_settings |
898 |
|
|
899 |
#stop at last the preliminary networking (dhcp) |
# stop at last the preliminary networking (dhcp) |
900 |
preliminary_network stop |
preliminary_network stop |
901 |
;; |
;; |
902 |
|
|
903 |
stop) |
stop) |
904 |
#unset_alx_connected #--> now in alxsetstate-rc6 |
# unset_alx_connected #--> now in alxsetstate-rc6 |
905 |
# ! important !: del systemstate |
# ! important !: del systemstate |
906 |
[ -f /etc/alxconfig-ng/state/state ] && rm /etc/alxconfig-ng/state/state |
[ -f /etc/alxconfig-ng/state/state ] && rm /etc/alxconfig-ng/state/state |
907 |
sleep 0.1 |
sleep 0.1 |
908 |
;; |
;; |
909 |
|
|
910 |
*) |
*) |
911 |
echo "Usage: $0 {start|stop} ..." |
echo "Usage: $0 {start|stop} ..." |
912 |
;; |
;; |