Diff of /alx-src/branches/alxconf-060/init.d/alxsettings

Parent Directory | Revision Log | Patch

	revision 221 by niro, Tue Mar 8 20:49:14 2005 UTC	revision 248 by niro, Wed Apr 13 16:15:28 2005 UTC
#	Line 11	Line 11
11	#%before:	#%before:
12	#%after:	#%after:
13
14		# $Header: /home/cvsd/alx-cvs/alx-src/alxconfig-ng/init.d/alxsettings,v 1.8 2005-04-13 16:15:28 niro Exp $
15
16	# checks first if the client was already configured and if it has an valid serial	# checks first if the client was already configured and if it has an valid serial
17	# if not it runs the autoconfiguration script	# if not it runs the autoconfiguration script
18	# these settings will be used for client setup	# these settings will be used for client setup
#	Line 19	Line 21
21	# if no changes are at server side they will be kept, if yes the get updated.	# if no changes are at server side they will be kept, if yes the get updated.
22	# the server settings has higher priority.	# the server settings has higher priority.
23
	#                       +-----+
	#                       |start|
	#                       +-----+
	#                          |
	#                          |
	#              start_preliminary_network
	#                          |
	#                          |       n
	#                  serial_check ------->  get_new_serial
	#                          |                      |
	#                         y|                      |
	#                          |           n          |
	#                check_is_configured ---->  run_hw_detection
	#                          |                      |
	#                         y|                      |
	#            n             |                      |
	#        +--------cfg_equal_to_db          import_settings_to_db
	#        |                 |                      |
	#   update_from_db        y|                      |
	#        |                 |                      |
	#   set_is_configured      |                  set_is_configured
	#        +-----------------|                      |
	#                          +----------------------+
	#                          |
	#                          |
	#               stop_preliminary_network
	#                          |
	#                          |
	#                       +----+
	#                       |done|
	#                       +----+
	#                          |
	#                          |
	#                 normal_system_bootup
	#                          |
	#                          .
	#                          .
	#                          .
	#
	#
	#
24	source /etc/sysconfig/rc	source /etc/sysconfig/rc
25	source $rc_functions	source $rc_functions
26
27	#mysql settings	#mysql settings
28	source /etc/alx-config/config.rc	source /etc/alxconfig-ng/config.rc
29	source /opt/alx-config/functions/mysqlfunctions	source /usr/lib/alxconfig-ng/functions/mysqlfunctions
30	source /opt/alx-config/functions/alx-mysql-functions	source /usr/lib/alxconfig-ng/functions/serial_functions
31		source /usr/lib/alxconfig-ng/functions/config_network
32		source /usr/lib/alxconfig-ng/functions/config_printers
33		source /usr/lib/alxconfig-ng/functions/config_sessions
34		source /usr/lib/alxconfig-ng/functions/config_x11
35		source /usr/lib/alxconfig-ng/functions/config_auth
36
37	#check if mysql is available	#check if mysql is available
38	[ -x /usr/bin/mysql ] && MYSQL_ALX=true	[ -x /usr/bin/mysql ] && MYSQL_ALX=true
39
40	#other needed vars	#other needed vars
41	ALX_HW_DETECT=false	ALX_HW_DETECT=false
	ALX_NETWORK_SETUP=false
	ALX_XSERVER_SETUP=false
	ALX_SESSION_SETUP=false
	ALX_PRINTER_SETUP=false
42
43	#unset vars which may kill us	#unset vars which may kill us
44	unset ALX_SERIAL ALX_STATE	unset ALX_SERIAL ALX_STATE
45
46
47	#setup needed directories	#setup needed directories
48	[ ! -d /etc/alx-config/state ] && install -d /etc/alx-config/state	[ ! -d /etc/alxconfig-ng/state ] && install -d /etc/alxconfig-ng/state
	# still a need to implement this ?
	# #needed to detect usb/livecd boot
	# if [ -e /.bootdev ]
	# then
	# source /.bootdev
	# else
	# echo "Couldn't find /.bootdev. Aborting."
	# exit 1
	# fi
	# still a need to implement this ? --> media-check ?
	settings_import() {
	if [ "${FSTYPE}" == "vfat" ]
	then
	if [ -e /mnt/cdrom/settings/system ]
	then
	echo -e ${COLOREDSTAR}"Importing old alx-settings ..."
	( cp -R /mnt/cdrom/settings/system/* /etc/alx-config/settings/menu &&
	source /etc/alx-config/config.rc &&
	source /opt/alx-config/Configurator/config_functions.sh &&
	setup_xfree > /dev/null 2>&1 &&
	setup_modules > /dev/null 2>&1 &&
	setup_network > /dev/null 2>&1 &&
	#setup_printers > /dev/null 2>&1 &&
	setup_sessions > /dev/null 2>&1 &&
	touch /etc/alx-config/imported )
	evaluate_retval
	fi
	fi
	}
	# this thingy needs an complete rewrite.
	# first get all settings from db server,
	# than check against local system settings,
	# if there are any differences, update the local settings,
	# as the server has a higher priority.
	# Important: write local settings only if they make sense,
	#            to have a fallback in case the server is down!
	#get_settings_from_server(){
	# #some needed arrays
	# #ARRAY_NETWORK #module domain networking netmask dns gateway
	# #SESSION #
	# #GRAFIK  #
	#
	# echo "Importing now old Settings ..."
	#
	# local serial module domain networking netmask dns gateway i x all
	#
	# declare -i i=0
	#
	# #get hostname from database
	# MY_HOSTNAME=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select hostname from cfg_serial where id='${ALX_SERIAL}'")
	#
	# #get network settings from database
	# all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select module,
	# domain,
	# networking,
	# netmask,
	# dns,
	# gateway,
	# broadcast,
	# ip
	# from cfg_network where serial='${ALX_SERIAL}'")
	# #split'em up and put in array
	# for x in ${all}
	# do
	# ARRAY_NETWORK[${i}]=${x}
	# ((i++))
	# done
	# echo " Network:"
	# echo "   MODULE:     ${ARRAY_NETWORK[0]}"
	# echo "   IP:         ${ARRAY_NETWORK[7]}"
	# echo "   HOSTNAME:   ${MY_HOSTNAME}"
	# echo "   DOMAIN:     ${ARRAY_NETWORK[1]}"
	# echo "   NETWORKING: ${ARRAY_NETWORK[2]}"
	# echo "   NETMASK:    ${ARRAY_NETWORK[3]}"
	# echo "   DNS:        ${ARRAY_NETWORK[4]}"
	# echo "   GATEWAY:    ${ARRAY_NETWORK[5]}"
	# echo "   BROADCAST:  ${ARRAY_NETWORK[6]}"
	# echo
	#
	# #get x settings from database
	# local module resolution
	#
	# #reset i
	# declare -i i=0
	# all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select module,
	# resolution
	# from cfg_grafik where serial='${ALX_SERIAL}'")
	# #split'em up and put in array
	# for x in ${all}
	# do
	# ARRAY_GRAFIK[${i}]=${x}
	# ((i++))
	# done
	#
	# echo " VGA:"
	# echo "   MODULE:     ${ARRAY_GRAFIK[0]}"
	# echo "   RESOLUTION: ${ARRAY_GRAFIK[1]}"
	# echo
	#
	# #get ica-sessions from database
	# ARRAY_SESSIONS=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select session from cfg_session where serial='${ALX_SERIAL}'")
	#
	# echo " SESSIONS:"
	# declare -i i=0
	# for x in ${ARRAY_SESSIONS}
	# do
	# ((i++))
	# echo "   SESSION${i}:   ${x}"
	# done
	# echo
	#
	# #now write these settings
	# local SETTINGSPATH
	#
	# #network
	#
	# #settings must be also set on system, so we put this to menu
	# SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	#
	# [ ! -d ${SETTINGSPATH}/modules ] && install -d ${SETTINGSPATH}/modules
	# echo "${ARRAY_NETWORK[0]}" > ${SETTINGSPATH}/modules/modules
	#
	# [ ! -d ${SETTINGSPATH}/network ] && install -d ${SETTINGSPATH}/network
	# echo "${MY_HOSTNAME}" > ${SETTINGSPATH}/network/hostname
	# echo "${ARRAY_NETWORK[1]}" > ${SETTINGSPATH}/network/domain
	# echo "${ARRAY_NETWORK[2]}" > ${SETTINGSPATH}/network/networking
	# [ -n "${ARRAY_NETWORK[3]}" ] && echo "${ARRAY_NETWORK[3]}" > ${SETTINGSPATH}/network/netmask
	# [ -n "${ARRAY_NETWORK[4]}" ] && echo "${ARRAY_NETWORK[4]}" > ${SETTINGSPATH}/network/dns
	# [ -n "${ARRAY_NETWORK[5]}" ] && echo "${ARRAY_NETWORK[5]}" > ${SETTINGSPATH}/network/gateway
	# [ -n "${ARRAY_NETWORK[6]}" ] && echo "${ARRAY_NETWORK[6]}" > ${SETTINGSPATH}/network/broadcast
	# [ -n "${ARRAY_NETWORK[7]}" ] && echo "${ARRAY_NETWORK[7]}" > ${SETTINGSPATH}/network/ip
	validate_networking(){
	#source /opt/alx-config/Configurator/config_functions.sh
	local x i all LOCAL_NETWORK DB_NETWORK SETTINGSPATH
	#all arrays:
	# ->  hostname modules domain networking ip netmask dns gateway broadcast
	#networking
	#get settings from local system
	SETTINGSPATH=${SETTINGS_TEMPLATE}/system
	declare -i i=0
	for x in network/hostname \
	modules/modules \
	network/domain \
	network/networking \
	network/ip \
	network/netmask \
	network/dns \
	network/gateway \
	network/broadcast
	do
	if [ -f ${SETTINGSPATH}/${x} ]
	then
	#file exist, then use content
	LOCAL_NETWORK[${i}]="$(< ${SETTINGSPATH}/${x})"
	else
	LOCAL_NETWORK[${i}]=""
	fi
	((i++))
	done
	#get settings from database
	# DB_NETWORK[0]=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select hostname from cfg_network where serial='${ALX_SERIAL}'")
	all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select hostname,
	module,
	domain,
	networking,
	ip,
	netmask,
	dns,
	gateway,
	broadcast
	from cfg_network where serial='${ALX_SERIAL}'")
	#split'em up and put in an array
	declare -i i=0
	for x in ${all}
	do
	DB_NETWORK[${i}]=${x}
	((i++))
	done
	#needed by the small hotfix
	local FIX_ME
	FIX_ME="${DB_NETWORK[2]}"
	#now compare this stuff if they are equal
	for ((i=0; i < 9; i++))
	do
	if [ "${DB_NETWORK[${i}]}" = "${LOCAL_NETWORK[${i}]}" ]
	then
	echo "${i}: ${DB_NETWORK[${i}]} == ${LOCAL_NETWORK[${i}]}"
	#delete equal stuff from DB_NETWORK
	DB_NETWORK[${i}]="*NULL*"
	else
	echo "${i}: ${DB_NETWORK[${i}]} != ${LOCAL_NETWORK[${i}]}"
	fi
	done
	#update configs
	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	declare -i i=0
	for x in network/hostname \
	modules/modules \
	network/domain \
	network/networking \
	network/ip \
	network/netmask \
	network/dns \
	network/gateway \
	network/broadcast
	do
	#update only staff wich wasn't overwritten
	if [ "${DB_NETWORK[${i}]}" != "*NULL*" ]
	then
	#create directory if not exist
	if [ ! -d $(dirname ${SETTINGSPATH}/${x}) ]
	then
	install -d $(dirname ${SETTINGSPATH}/${x})
	fi
	echo "${DB_NETWORK[${i}]}" > ${SETTINGSPATH}/${x}
	# theses fucking config functions:
	# network gets only updated,
	# if ${SETTINGS_TEMPLATE}/menu/network/networking exist
	# so we force an update here
	if [ ! -f ${SETTINGSPATH}/network/networking ]
	then
	[ ! -d ${SETTINGSPATH}/network ] && install -d ${SETTINGSPATH}/network
	echo "${FIX_ME}" > ${SETTINGSPATH}/network/networking
	fi
	#set update flag
	ALX_NETWORK_SETUP=true
	fi
	((i++))
	done
	}
	validate_xserver(){
	#source /opt/alx-config/Configurator/config_functions.sh
	local x i all LOCAL_XSERVER DB_XSERVER SETTINGSPATH
	#all arrays:
	# ->  xmodule resolution depth mouse monvendor monmodel hsync vref
	#xserver
	#get settings from local system
	#vga
	SETTINGSPATH=${SETTINGS_TEMPLATE}/system
	declare -i i=0
	for x in vga/vga \
	vga/vgares \
	vga/vgadepth
	do
	if [ -f ${SETTINGSPATH}/${x} ]
	then
	#file exist, then use content
	LOCAL_XSERVER[${i}]="$(< ${SETTINGSPATH}/${x})"
	else
	LOCAL_XSERVER[${i}]=""
	fi
	((i++))
	done
	#mouse
	if [ -f ${SETTINGSPATH}/mouse/mouse ]
	then
	#file exist, then use content
	LOCAL_XSERVER[3]="$(< ${SETTINGSPATH}/mouse/mouse)"
	else
	LOCAL_XSERVER[3]=""
	fi
	#monitor
	local myvendor mymodel hsync vref
	if [ -f ${SETTINGSPATH}/monitor/monitor ]
	then
	source ${SETTINGSPATH}/monitor/monitor
	declare -i i=4
	for x in "${myvendor}" \
	"${mymodel}" \
	"${hsync}" \
	"${vref}"
	do
	LOCAL_XSERVER[${i}]="${x}"
	((i++))
	done
	else
	LOCAL_XSERVER[4]=""
	LOCAL_XSERVER[5]=""
	LOCAL_XSERVER[6]=""
	LOCAL_XSERVER[7]=""
	fi
	#get settings from database
	all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select module,
	resolution,
	depth
	from cfg_graphic where serial='${ALX_SERIAL}'")
	#split'em up and put in an array
	declare -i i=0
	for x in ${all}
	do
	DB_XSERVER[${i}]=${x}
	((i++))
	done
	# read mouse
	DB_XSERVER[3]=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select mouse from cfg_input where serial='${ALX_SERIAL}'")
	#monitors
	# all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select vendor,
	# model,
	# hsync,
	# vrefresh
	# from cfg_monitor where serial='${ALX_SERIAL}'")
	all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select vendor,
	model,
	hsync,
	vrefresh
	from list_monitors
	inner join cfg_graphic
	on cfg_graphic.monitorid=list_monitors.id;")
	#split'em up and put in an array
	declare -i i=4
	for x in ${all}
	do
	DB_XSERVER[${i}]=${x}
	((i++))
	done
	# #now compare this stuff if they are equal
	# for ((i=0; i < 8; i++))
	# do
	# if [ "${DB_XSERVER[${i}]}" = "${LOCAL_XSERVER[${i}]}" ]
	# then
	# echo "${i}: ${DB_XSERVER[${i}]} == ${LOCAL_XSERVER[${i}]}"
	#
	# #delete equal stuff from DB_NETWORK
	# DB_XSERVER[${i}]="*NULL*"
	#
	# else
	# echo "${i}: ${DB_XSERVER[${i}]} != ${LOCAL_XSERVER[${i}]}"
	# fi
	# done
	#
	#
	# #update configs
	# SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	# #xserver general
	# declare -i i=0
	# for x in vga/vga \
	# vga/vgares \
	# vga/vgadepth \
	# mouse/mouse
	# do
	# #update only staff wich wasn't overwritten
	# if [ "${DB_XSERVER[${i}]}" != "*NULL*" ]
	# then
	# #create directory if not exist
	# if [ ! -d $(dirname ${SETTINGSPATH}/${x}) ]
	# then
	# install -d $(dirname ${SETTINGSPATH}/${x})
	# fi
	# echo "${DB_XSERVER[${i}]}" > ${SETTINGSPATH}/${x}
	# #set update flag
	# ALX_XSERVER_SETUP=true
	# fi
	# ((i++))
	# done
	#
	# #xserver monitors
	# if [ "${DB_XSERVER[4]}" != "*NULL*" \
	# -o "${DB_XSERVER[5]}" != "*NULL*" \
	# -o "${DB_XSERVER[6]}" != "*NULL*" \
	# -o "${DB_XSERVER[7]}" != "*NULL*" ]
	# then
	# if [ ! -d ${SETTINGSPATH}/monitor ]
	# then
	# install -d ${SETTINGSPATH}/monitor
	# fi
	# echo "myvendor=\"${DB_XSERVER[4]}\"" > ${SETTINGSPATH}/monitor/monitor
	# echo "mymodel=\"${DB_XSERVER[5]}\"" >> ${SETTINGSPATH}/monitor/monitor
	# echo "hsync=\"${DB_XSERVER[6]}\"" >> ${SETTINGSPATH}/monitor/monitor
	# echo "vref=\"${DB_XSERVER[7]}\"" >> ${SETTINGSPATH}/monitor/monitor
	#
	# #set update flag
	# ALX_XSERVER_SETUP=true
	# fi
	# - damn fucking setup_xfree routine need to rewrite this fucking stuff -
	# setup_xfree will only run
	# if ${SETTINGS_TEMPLATE}/menu/vga/vga exist
	# so we must *always* update *all* settings if something has changed
	#now compare this stuff if they are equal
	for ((i=0; i < 8; i++))
	do
	if [ "${DB_XSERVER[${i}]}" = "${LOCAL_XSERVER[${i}]}" ]
	then
	echo "${i}: ${DB_XSERVER[${i}]} == ${LOCAL_XSERVER[${i}]}"
	#delete equal stuff from DB_NETWORK
	#DB_XSERVER[${i}]="*NULL*"
	else
	echo "${i}: ${DB_XSERVER[${i}]} != ${LOCAL_XSERVER[${i}]}"
	fi
	done
49
	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	if [ "${DB_XSERVER[0]}" != "*NULL*" \
	-o "${DB_XSERVER[1]}" != "*NULL*" \
	-o "${DB_XSERVER[2]}" != "*NULL*" \
	-o "${DB_XSERVER[3]}" != "*NULL*" \
	-o "${DB_XSERVER[4]}" != "*NULL*" \
	-o "${DB_XSERVER[5]}" != "*NULL*" \
	-o "${DB_XSERVER[6]}" != "*NULL*" \
	-o "${DB_XSERVER[7]}" != "*NULL*" ]
	then
	[ ! -d ${SETTINGSPATH}/vga ] && install -d ${SETTINGSPATH}/vga
	[ ! -d ${SETTINGSPATH}/mouse ] && install -d ${SETTINGSPATH}/mouse
	[ ! -d ${SETTINGSPATH}/monitor ] && install -d ${SETTINGSPATH}/monitor
	echo "${DB_XSERVER[0]}" > ${SETTINGSPATH}/vga/vga
	echo "${DB_XSERVER[1]}" > ${SETTINGSPATH}/vga/vgares
	echo "${DB_XSERVER[2]}" > ${SETTINGSPATH}/vga/vgadepth
	echo "${DB_XSERVER[3]}" > ${SETTINGSPATH}/mouse/mouse
	echo "myvendor=\"${DB_XSERVER[4]}\"" > ${SETTINGSPATH}/monitor/monitor
	echo "mymodel=\"${DB_XSERVER[5]}\"" >> ${SETTINGSPATH}/monitor/monitor
	echo "hsync=\"${DB_XSERVER[6]}\"" >> ${SETTINGSPATH}/monitor/monitor
	echo "vref=\"${DB_XSERVER[7]}\"" >> ${SETTINGSPATH}/monitor/monitor
	#set update flag
	ALX_XSERVER_SETUP=true
	fi
	}
50
51		update_system_settings(){
52		echo -e ${COLMAGENTA}"Checking system setup ..."${COLDEFAULT}
53
54	validate_sessions(){	# imports network settings from db
55	#source /opt/alx-config/Configurator/config_functions.sh	config_networking
	local x i all LOCAL_SESSIONS DB_SESSIONS SETTINGSPATH count
	#all arrays:
	# ->  session1 session2 ... sessionN
	#no LOCAL_SESSIONS here, needs bubblesort
	#get settings from database
	all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select session from cfg_sessions where serial='${ALX_SERIAL}'")
	#split'em up and put in an array (only if $all not zero)
	declare -i i=0
	if [ -n "${all}" ]
	then
	for x in ${all}
	do
	DB_SESSIONS[${i}]=${x}
	((i++))
	done
	count=${i}
	else
	count=0
	fi
	## no compare here, can only done with bubblesort or s.th like that
	# shows only the new sessions
	declare -i i=0
	#count=${#DB_SESSIONS[*]} #---> not working gets always 1, why ?
	echo "Number of new sessions: ${count}"
	for ((i=0; i < count; i++))
	do
	echo "${i} - ${DB_SESSIONS[${i}]}"
	done
	#update local configs
	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	declare -i i=0
	#count=${#DB_SESSIONS[*]}
	if [ ${count} -gt 0 ]
	then
	#create directory if not exist
	[ ! -d ${SETTINGSPATH}/sessions ] && install -d ${SETTINGSPATH}/sessions
	#delete old sessions
	echo -n > ${SETTINGSPATH}/sessions/sessions
	for ((i=0; i < count; i++))
	do
	echo "${DB_SESSIONS[${i}]}" >> ${SETTINGSPATH}/sessions/sessions
	done
	#set update flag
	ALX_SESSION_SETUP=true
	fi
	}
56
57	validate_printing(){	# imports x11 settings from db
58	#source /opt/alx-config/Configurator/config_functions.sh	config_x11
59
60	local x i k all LOCAL_PRINTER DB_PRINTER SETTINGSPATH count	# imports session settings from db
61		config_sessions
	#all arrays: [2 dimensions !]
	# ->  name1 name2 ... nameN
	# ->  name1 printingport ip share
	#later on, for now -> name1 port1 ip1 share1 name2 ....
	# seperator is 4
	#local PRINTERNAME PRINTING IP SHARE
	# update *always* printers from database;
	# compare with local settings cannot be done yet
	#get settings from database
	all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select printer_name,
	port,
	ip,
	share
	from cfg_printers where serial='${ALX_SERIAL}'")
	#split'em up and put in an array
	declare -i i=0
	declare -i k=0
	if [ -n "${all}" ]
	then
	for x in ${all}
	do
	((k++))
	DB_PRINTER[${i}]="${DB_PRINTER[${i}]} ${x}"
	if [ ${k} -eq 4 ]
	then
	((i++))
	#reset $k
	declare -i k=0
	fi
	done
	count=${i}
	else
	count=0
	fi
	#echo settings
	echo "Number of new printers: ${count}"
	for ((i=0; i < count; i++))
	do
	echo "${i} printer:"
	for x in ${DB_PRINTER[${i}]}
	do
	echo "    ${x}"
	done
	done
	#import settings (only if counter > 0)
	local prnset
	#delete all printers (*always*)
	if [ -d ${SETTINGS_TEMPLATE}/system/printing ]
	then
	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	[ -d ${SETTINGSPATH}/delete ] && rm -rf ${SETTINGSPATH}/delete
	install -d ${SETTINGSPATH}/delete
	mv -f ${SETTINGS_TEMPLATE}/system/printing/* ${SETTINGSPATH}/delete
	rm -rf ${SETTINGS_TEMPLATE}/system/printing
	#set update flag (*always*)
	ALX_PRINTER_SETUP=true
	fi
	if [ ${count} -gt 0 ]
	then
	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	[ ! -d ${SETTINGSPATH}/printing ] && install -d ${SETTINGSPATH}/printing
	for ((i=0; i < count; i++))
	do
	declare -i k=0
	for x in ${DB_PRINTER[${i}]}
	do
	prnset[${k}]=${x}
	((k++))
	done
	echo "PRINTERNAME=${prnset[0]}" >  ${SETTINGSPATH}/printing/${prnset[0]}
	echo "PRINTING=${prnset[1]}" >> ${SETTINGSPATH}/printing/${prnset[0]}
	echo "IP=${prnset[2]}" >> ${SETTINGSPATH}/printing/${prnset[0]}
	echo "SHARE=${prnset[3]}" >> ${SETTINGSPATH}/printing/${prnset[0]}
	done
	#set update flag (*always*)
	ALX_PRINTER_SETUP=true
	fi
	}
62
63	update_system_settings(){	# imports printer settings from db
64	source /opt/alx-config/Configurator/config_functions.sh	config_printing
65
66	echo -e ${COLMAGENTA}"Checking system setup ..."${COLDEFAULT}	# imports auth settings from db
67		config_auth
	echo
	echo "network"
	validate_networking
	echo
	echo "xserver"
	validate_xserver
	echo
	echo "sessions"
	validate_sessions
	echo
	#echo "printers"
	#validate_printing
	#echo
	if [ "${ALX_NETWORK_SETUP}" == "true" ]
	then
	echo -e ${COLMAGENTA}"Updating network settings"${COLDEFAULT}
	setup_modules
	setup_network
	fi
	if [ "${ALX_XSERVER_SETUP}" == "true" ]
	then
	echo -e ${COLMAGENTA}"Updating xserver settings"${COLDEFAULT}
	setup_xfree
	fi
	if [ "${ALX_SESSION_SETUP}" == "true" ]
	then
	echo -e ${COLMAGENTA}"Updating session settings"${COLDEFAULT}
	setup_sessions
	fi
	#if [ "${ALX_PRINTER_SETUP}" == "true" ]
	#then
	# echo -e ${COLMAGENTA}"Updating printer settings"${COLDEFAULT}
	# setup_printers
	#fi
	#clean up temp files
	local SETTINGSPATH
	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	#[ -d ${SETTINGSPATH} ] && rm -rf ${SETTINGSPATH}
68	}	}
69
70	get_system_serial(){	get_system_serial(){
#	Line 778  get_system_serial(){	Line 72  get_system_serial(){
72	local CUR_IP CUR_MAC CUR_MTIME	local CUR_IP CUR_MAC CUR_MTIME
73
74	#check if serial file exists	#check if serial file exists
75	if [ -f /etc/alx-config/serial ]	if [ -f /etc/alxconfig-ng/serial ]
76	then	then
77	source /etc/alx-config/serial	source /etc/alxconfig-ng/serial
78
79	# if system is already configured, it *has* a hostname.	#start preliminary networking (dhcp)
	# so we take the hostname of this system here
	source /etc/hostname
	#start preliminary networking (dhcp)
80	preliminary_network start	preliminary_network start
81
82	CUR_IP=$(/sbin/ifconfig eth0 | sed -n '/addr:/s/ [^r]*..//gp')	CUR_IP=$(/sbin/ifconfig eth0 | sed -n '/addr:/s/ [^r]*..//gp')
83	CUR_MAC=$(/sbin/ifconfig eth0 | grep HWaddr | cut -d ' ' -f11)	CUR_MAC=$(/sbin/ifconfig eth0 | grep HWaddr | cut -d ' ' -f11)
84	CUR_MTIME=$(date +%s)	CUR_MTIME=$(date +%s)
85
86	echo -e ${COLOREDSTAR} "Trying to validate my serial ..."	echo -e ${COLOREDSTAR} "Trying to validate my serial ..."
87
88	#nice serial output	#nice serial output
89	$CURS_UP	$CURS_UP
90	$SET_WCOL	$SET_WCOL
91	echo "[ SN: ${ALX_SERIAL} ]"	echo "[ SN: ${ALX_SERIAL} ]"
	# #is this system outdated ?
	# #MY_HOSTNAME=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# # "select hostname from cfg_serial where id='${ALX_SERIAL}'")
	#
	# #we do this now with the date instead of the hostname
	# local MY_ALX_REG_DATE
	# MY_ALX_REG_DATE=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select mtime from client_serial where serial='${ALX_SERIAL}'")
	#
	# #if [ "${MY_HOSTNAME}" == "${HOSTNAME}" ]
	# if [ "${MY_ALX_REG_DATE}" == "${ALX_REG_DATE}" ]
	# then
	# #set ALX_STATE to ok so everybody that everything was ok
	# ALX_STATE=ok
	#
	# evaluate_retval
	# else
	# #print false (works only if this is the first statement here)
	# evaluate_retval
	#
	# #set ALX_STATE to error so everybody sees there was an error
	# ALX_STATE=error
	# fi
92
93	if validate_serial "${ALX_SERIAL}" "${ALX_REG_DATE}" "${CUR_MAC}"	if validate_serial "${ALX_SERIAL}" "${ALX_REG_DATE}" "${CUR_MAC}"
94	then	then
#	Line 837  get_system_serial(){	Line 103  get_system_serial(){
103	echo -e ${COLMAGENTA}"Preparing system for first boot"${COLDEFAULT}	echo -e ${COLMAGENTA}"Preparing system for first boot"${COLDEFAULT}
104	ALX_HW_DETECT=true	ALX_HW_DETECT=true
105	/etc/init.d/hwdetect start	/etc/init.d/hwdetect start
106
107	#set hostname to alx_default_hostname	#set hostname to alx_default_hostname
108	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx
109	HOSTNAME="${ALX_DEFAULT_HOSTNAME}"	HOSTNAME="${ALX_DEFAULT_HOSTNAME}"
110
111	#update the hostname on the system for sure	#update the hostname on the system for sure
112	echo "HOSTNAME=${HOSTNAME}" > /etc/hostname	echo "${HOSTNAME}" > /etc/hostname
113
114	#start preliminary networking (dhcp)	#start preliminary networking (dhcp)
115	preliminary_network start	preliminary_network start
116
117	CUR_IP=$(/sbin/ifconfig eth0 | sed -n '/addr:/s/ [^r]*..//gp')	CUR_IP=$(/sbin/ifconfig eth0 | sed -n '/addr:/s/ [^r]*..//gp')
118	CUR_MAC=$(/sbin/ifconfig eth0 | grep HWaddr | cut -d ' ' -f11)	CUR_MAC=$(/sbin/ifconfig eth0 | grep HWaddr | cut -d ' ' -f11)
119	CUR_MTIME=$(date +%s)	CUR_MTIME=$(date +%s)
120
121	echo -e ${COLOREDSTAR} "Trying to get new serial ..."	echo -e ${COLOREDSTAR} "Trying to get new serial ..."
122
123	#request new serial	#request new serial
124	#ALX_REG_DATE="$(date +%F)"	#ALX_REG_DATE="$(date +%F)"
125
126	#we're using the mtime now (better for vaildating the serial)	#we're using the mtime now (better for vaildating the serial)
127	mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \	mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
128	"insert into client_serials(	"insert into client_serials(
#	Line 867  get_system_serial(){	Line 133  get_system_serial(){
133	'${CUR_MTIME}',	'${CUR_MTIME}',
134	'${CUR_MAC}'	'${CUR_MAC}'
135	);"	);"
136
137	#then validate and retrieve serial	#then validate and retrieve serial
138
139	### warning must be changed that only the LAST ID will be fetched,  ###	### warning must be changed that only the LAST ID will be fetched,  ###
140	### or you get error if the computer name and date are the same     ###	### or you get error if the computer name and date are the same     ###
141	### you have more then one serial number than                       ###	### you have more than one serial number then                       ###
142
	#not 100% working may get more than *one* id
	#ALX_SERIAL=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select id from cfg_serial where datum='${ALX_REG_DATE}' and hostname='${HOSTNAME}'")
143	#select highest id only (added max)	#select highest id only (added max)
144	ALX_SERIAL=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \	ALX_SERIAL=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
145	"select max(serial) from client_serials where mtime='${CUR_MTIME}' and mac='${CUR_MAC}'")	"select max(serial) from client_serials where mtime='${CUR_MTIME}' and mac='${CUR_MAC}'")
#	Line 888  get_system_serial(){	Line 150  get_system_serial(){
150	$CURS_UP	$CURS_UP
151	$SET_WCOL	$SET_WCOL
152	echo "[ SN: ${ALX_SERIAL} ]"	echo "[ SN: ${ALX_SERIAL} ]"
153
154	#set ALX_STATE to ok so everybody that everything was ok	#set ALX_STATE to ok so everybody that everything was ok
155	ALX_STATE=ok	ALX_STATE=ok
156
157	echo "ALX_SERIAL=${ALX_SERIAL}" > /etc/alx-config/serial	echo "ALX_SERIAL=${ALX_SERIAL}" > /etc/alxconfig-ng/serial
158	echo "ALX_REG_DATE=${CUR_MTIME}" >> /etc/alx-config/serial	echo "ALX_REG_DATE=${CUR_MTIME}" >> /etc/alxconfig-ng/serial
159
160	evaluate_retval	evaluate_retval
161	else	else
162	#print false (works only if this is the first statement here)	#print false (works only if this is the first statement here)
163	evaluate_retval	evaluate_retval
164
165	#set ALX_STATE to error so everybody sees there was an error	#set ALX_STATE to error so everybody sees there was an error
166	ALX_STATE=error	ALX_STATE=error
167
168	#show an error that no new serial was found	#show an error that no new serial was found
169	#nice serial output	#nice serial output
170	$CURS_UP	$CURS_UP
#	Line 910  get_system_serial(){	Line 172  get_system_serial(){
172	echo -e "[ SN: ${COLRED}None, 0${COLDEFAULT} ]"	echo -e "[ SN: ${COLRED}None, 0${COLDEFAULT} ]"
173	fi	fi
174	fi	fi
175
176	#write current state to temp file	#write current state to temp file
177	echo "ALX_STATE=${ALX_STATE}" > /etc/alx-config/state/state	echo "ALX_STATE=${ALX_STATE}" > /etc/alxconfig-ng/state/state
178	}	}
179
180
181	check_is_configured() {	check_is_configured() {
182	if [ -f /etc/alx-config/state/configured ]	if [ -f /etc/alxconfig-ng/state/configured ]
183	then	then
184	export ALX_CONFIGURED=true	export ALX_CONFIGURED=true
185	else	else
#	Line 930  check_is_configured() {	Line 192  check_is_configured() {
192	import_settings_to_db() {	import_settings_to_db() {
193	#note: networking is always 'dhcp' if hw was autodetected	#note: networking is always 'dhcp' if hw was autodetected
194	#note: default_domain/hostname is set in config.rc	#note: default_domain/hostname is set in config.rc
195
196	#to be safe, we do some sanity checks	#to be safe, we do some sanity checks
197	[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain	[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain
198	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx
199
200	#vars used by hwdetect	#vars used by hwdetect
201	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
202	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
203	local MOUSETYPE XMOUSETYPE FULLNAME DEVICE	local MOUSETYPE XMOUSETYPE FULLNAME DEVICE
204
205	#get setting from hwdetect	#get setting from hwdetect
206	source /etc/sysconfig/hwsetup/knoppix	source /etc/sysconfig/hwsetup/knoppix
207	source /etc/sysconfig/hwsetup/mouse	source /etc/sysconfig/hwsetup/mouse
208
209	echo	echo
210	echo -e ${COLMAGENTA}"Importing detected settings to database"${COLDEFAULT}	echo -e ${COLMAGENTA}"Importing detected settings to database"${COLDEFAULT}
211
212	#network	#network
213	echo -e "      Network settings ..."	echo -e "      Network settings ..."
214	mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \	mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
#	Line 965  import_settings_to_db() {	Line 227  import_settings_to_db() {
227	'dhcp'	'dhcp'
228	);"	);"
229	evaluate_retval	evaluate_retval
230
231	#xserver	#xserver
232	echo -e "      Graphic settings ..."	echo -e "      Graphic settings ..."
233	#xserver general	#xserver general
#	Line 974  import_settings_to_db() {	Line 236  import_settings_to_db() {
236	serial,	serial,
237	module,	module,
238	resolution,	resolution,
239	depth	depth,
240		monitorid
241	)	)
242	values(	values(
243	'${ALX_SERIAL}',	'${ALX_SERIAL}',
244	'${XMODULE}',	'${XMODULE}',
245	'1024x768',	'1024x768',
246	'16'	'16',
247	);";	'0'
	#xserver monitor
	mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"insert into cfg_monitor(
	serial,
	vendor,
	model,
	hsync,
	vrefresh
	)
	values(
	'${ALX_SERIAL}',
	'Aamazing',
	'CM-1528-FS',
	'28-64',
	'47-104'
248	);";	);";
249
250	# input	# input
251	mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \	mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
252	"insert into cfg_input(serial,mouse) values('${ALX_SERIAL}','${XMOUSETYPE}');";)	"insert into cfg_input(serial,mouse) values('${ALX_SERIAL}','${XMOUSETYPE}');";)
#	Line 1006  import_settings_to_db() {	Line 254  import_settings_to_db() {
254	}	}
255
256	# imports current settings to the local system resolved by the hardware detection	# imports current settings to the local system resolved by the hardware detection
257		# we only need the network settings
258	import_settings_local(){	import_settings_local(){
259	#note: networking is always 'dhcp' if hw was autodetected	#note: networking is always 'dhcp' if hw was autodetected
260	#note: default_domain/hostname is set in config.rc	#note: default_domain/hostname is set in config.rc
261
262	#to be safe, we do some sanity checks	#to be safe, we do some sanity checks
263	[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain	[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain
264	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx
265
266	#vars used by hwdetect	#vars used by hwdetect
267	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
268	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
269	local MOUSETYPE XMOUSETYPE FULLNAME DEVICE	local MOUSETYPE XMOUSETYPE FULLNAME DEVICE
270
271	#get setting from hwdetect	#get setting from hwdetect
272	source /etc/sysconfig/hwsetup/knoppix	source /etc/sysconfig/hwsetup/knoppix
273	source /etc/sysconfig/hwsetup/mouse
274	echo	echo
275	echo -e ${COLMAGENTA}"Importing detected settings to local system"${COLDEFAULT}	echo -e ${COLMAGENTA}"Importing detected settings to local system"${COLDEFAULT}
276
277		[ ! -d ${SETTINGSPATH} ] && install -d ${SETTINGSPATH}
278	#allready configured, no update needed so we put it to system	echo "${NETCARD_DRIVER}" > ${SETTINGSPATH}/modules
	SETTINGSPATH=${SETTINGS_TEMPLATE}/system
	#network
	echo -e "      Network settings ..."
	[ ! -d ${SETTINGSPATH}/modules ] && install -d ${SETTINGSPATH}/modules
	echo "${NETCARD_DRIVER}" > ${SETTINGSPATH}/modules/modules
	[ ! -d ${SETTINGSPATH}/network ] && install -d ${SETTINGSPATH}/network
	( echo "${ALX_DEFAULT_HOSTNAME}" > ${SETTINGSPATH}/network/hostname;
	echo "${ALX_DEFAULT_DOMAIN}" > ${SETTINGSPATH}/network/domain;
	echo "dhcp" > ${SETTINGSPATH}/network/networking )
279	evaluate_retval	evaluate_retval
280
	#xserver
	echo -e "      Graphic settings ..."
	[ ! -d ${SETTINGSPATH}/vga ] && install -d ${SETTINGSPATH}/vga
	[ ! -d ${SETTINGSPATH}/mouse ] && install -d ${SETTINGSPATH}/mouse
	[ ! -d ${SETTINGSPATH}/monitor ] && install -d ${SETTINGSPATH}/monitor
	( echo "${XMODULE}" > ${SETTINGSPATH}/vga/vga;
	echo "16" > ${SETTINGSPATH}/vga/vgadepth;
	echo "1024x768" > ${SETTINGSPATH}/vga/vgares;
	echo "${XMOUSETYPE}" > ${SETTINGSPATH}/mouse/mouse;
	echo "myvendor=\"Aamazing\"" > ${SETTINGSPATH}/monitor/monitor;
	echo "mymodel=\"CM-1528-FS\"" >> ${SETTINGSPATH}/monitor/monitor;
	echo "hsync=\"28-64\"" >> ${SETTINGSPATH}/monitor/monitor;
	echo "vref=\"47-104\"" >> ${SETTINGSPATH}/monitor/monitor;)
	evaluate_retval
281	#set system state to 'already configured'	#set system state to 'already configured'
282	touch /etc/alx-config/state/configured	touch /etc/alxconfig-ng/state/configured
283	}	}
284
285	#start|stop	#start|stop
286	preliminary_network(){	preliminary_network(){
287	local module	local module
288
289	if [ -f /etc/alx-config/state/configured ]	if [ -f /etc/alxconfig-ng/state/configured ]
290	then	then
291	#get module name	#get module name
292	module=$(cat ${SETTINGS_TEMPLATE}/system/modules/modules)	module=$(cat ${SETTINGSPATH}/modules)
293	modprobe ${module}	modprobe ${module}
294	else	else
295	#vars used by hwdetect	#vars used by hwdetect
296	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
297	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
298
299	#get setting from hwdetect	#get setting from hwdetect
300	source /etc/sysconfig/hwsetup/knoppix	source /etc/sysconfig/hwsetup/knoppix
301	modprobe ${NETCARD_DRIVER}	modprobe ${NETCARD_DRIVER}
302	fi	fi
303
304	case $1 in	case $1 in
305	start)	start)
306	# keeping like always safe:	# keeping like always safe:
#	Line 1097  preliminary_network(){	Line 314  preliminary_network(){
314	else	else
315	rm -f /var/run/dhcpcd-eth?.pid	rm -f /var/run/dhcpcd-eth?.pid
316	fi	fi
317
318	echo -e ${COLMAGENTA}"Starting preliminary network ... "${COLDEFAULT}	echo -e ${COLMAGENTA}"Starting preliminary network ... "${COLDEFAULT}
319	#dhcpcd &> /dev/null #&& echo "ok" || echo "false"	dhcpcd &> /dev/null
320
321	# aka_fix ########################################	# aka_fix ########################################
322	ifconfig eth0 128.20.222.222 netmask 255.255.0.0 up	#ifconfig eth0 128.20.222.222 netmask 255.255.0.0 up
323	route del default gw 128.20.50.13 &> /dev/null	#route del default gw 128.20.50.13 &> /dev/null
324	route add default gw 128.20.50.21 &> /dev/null	#route add default gw 128.20.50.21 &> /dev/null
325	echo "nameserver 128.20.50.21" > /etc/resolv.conf	#echo "nameserver 128.20.50.21" > /etc/resolv.conf
326	##################################################	##################################################
327
328	evaluate_retval	evaluate_retval
329	;;	;;
330
331	stop)	stop)
332	echo -e ${COLMAGENTA}"Stopping preliminary network ... "${COLDEFAULT}	echo -e ${COLMAGENTA}"Stopping preliminary network ... "${COLDEFAULT}
333	ifconfig eth0 down	ifconfig eth0 down
334	if ps -A|grep dhcpcd > /dev/null	if ps -A|grep dhcpcd > /dev/null
335	then	then
	#echo -en ${COLMAGENTA}"Stopping preliminary network ... "${COLDEFAULT}
336	dhcpcd -z  &> /dev/null	dhcpcd -z  &> /dev/null
337	fi	fi
338	evaluate_retval	evaluate_retval
339	;;	;;
340
341	*)	*)
342	echo "Usage: preliminary_network {start|stop}"	echo "Usage: preliminary_network {start|stop}"
343	;;	;;
#	Line 1146  case $1 in	Line 365  case $1 in
365	stop)	stop)
366	#unset_alx_connected #--> now in alxsetstate-rc6	#unset_alx_connected #--> now in alxsetstate-rc6
367	# ! important !: del systemstate	# ! important !: del systemstate
368	[ -f /etc/alx-config/state/state ] && rm /etc/alx-config/state/state	[ -f /etc/alxconfig-ng/state/state ] && rm /etc/alxconfig-ng/state/state
369	sleep 0.1	sleep 0.1
370	;;	;;
371	*)	*)

---

Colored Diff Long Colored Diff Full Colored Diff Unidiff Context Diff Side by Side

Legend: Removed from v.221   changed lines   Added in v.248