Diff of /alx-src/branches/alxconf-060/init.d/alxsettings

Parent Directory | Revision Log | Patch

	revision 221 by niro, Tue Mar 8 20:49:14 2005 UTC	revision 252 by niro, Thu Apr 14 19:12:21 2005 UTC
#	Line 11	Line 11
11	#%before:	#%before:
12	#%after:	#%after:
13
14		# $Header: /home/cvsd/alx-cvs/alx-src/alxconfig-ng/init.d/alxsettings,v 1.9 2005-04-14 19:12:21 niro Exp $
15
16	# checks first if the client was already configured and if it has an valid serial	# checks first if the client was already configured and if it has an valid serial
17	# if not it runs the autoconfiguration script	# if not it runs the autoconfiguration script
18	# these settings will be used for client setup	# these settings will be used for client setup
#	Line 19	Line 21
21	# if no changes are at server side they will be kept, if yes the get updated.	# if no changes are at server side they will be kept, if yes the get updated.
22	# the server settings has higher priority.	# the server settings has higher priority.
23
	#                       +-----+
	#                       |start|
	#                       +-----+
	#                          |
	#                          |
	#              start_preliminary_network
	#                          |
	#                          |       n
	#                  serial_check ------->  get_new_serial
	#                          |                      |
	#                         y|                      |
	#                          |           n          |
	#                check_is_configured ---->  run_hw_detection
	#                          |                      |
	#                         y|                      |
	#            n             |                      |
	#        +--------cfg_equal_to_db          import_settings_to_db
	#        |                 |                      |
	#   update_from_db        y|                      |
	#        |                 |                      |
	#   set_is_configured      |                  set_is_configured
	#        +-----------------|                      |
	#                          +----------------------+
	#                          |
	#                          |
	#               stop_preliminary_network
	#                          |
	#                          |
	#                       +----+
	#                       |done|
	#                       +----+
	#                          |
	#                          |
	#                 normal_system_bootup
	#                          |
	#                          .
	#                          .
	#                          .
	#
	#
	#
24	source /etc/sysconfig/rc	source /etc/sysconfig/rc
25	source $rc_functions	source $rc_functions
26
27	#mysql settings	#mysql settings
28	source /etc/alx-config/config.rc	source /etc/alxconfig-ng/config.rc
29	source /opt/alx-config/functions/mysqlfunctions	source /usr/lib/alxconfig-ng/functions/mysqlfunctions
30	source /opt/alx-config/functions/alx-mysql-functions	source /usr/lib/alxconfig-ng/functions/serial_functions
31		source /usr/lib/alxconfig-ng/functions/config_network
32		source /usr/lib/alxconfig-ng/functions/config_printers
33		source /usr/lib/alxconfig-ng/functions/config_sessions
34		source /usr/lib/alxconfig-ng/functions/config_x11
35		source /usr/lib/alxconfig-ng/functions/config_auth
36		source /usr/lib/alxconfig-ng/functions/config_ssh_auth
37
38	#check if mysql is available	#check if mysql is available
39	[ -x /usr/bin/mysql ] && MYSQL_ALX=true	[ -x /usr/bin/mysql ] && MYSQL_ALX=true
40
41	#other needed vars	#other needed vars
42	ALX_HW_DETECT=false	ALX_HW_DETECT=false
	ALX_NETWORK_SETUP=false
	ALX_XSERVER_SETUP=false
	ALX_SESSION_SETUP=false
	ALX_PRINTER_SETUP=false
43
44	#unset vars which may kill us	#unset vars which may kill us
45	unset ALX_SERIAL ALX_STATE	unset ALX_SERIAL ALX_STATE
46
47
48	#setup needed directories	#setup needed directories
49	[ ! -d /etc/alx-config/state ] && install -d /etc/alx-config/state	[ ! -d /etc/alxconfig-ng/state ] && install -d /etc/alxconfig-ng/state
	# still a need to implement this ?
	# #needed to detect usb/livecd boot
	# if [ -e /.bootdev ]
	# then
	# source /.bootdev
	# else
	# echo "Couldn't find /.bootdev. Aborting."
	# exit 1
	# fi
	# still a need to implement this ? --> media-check ?
	settings_import() {
	if [ "${FSTYPE}" == "vfat" ]
	then
	if [ -e /mnt/cdrom/settings/system ]
	then
	echo -e ${COLOREDSTAR}"Importing old alx-settings ..."
	( cp -R /mnt/cdrom/settings/system/* /etc/alx-config/settings/menu &&
	source /etc/alx-config/config.rc &&
	source /opt/alx-config/Configurator/config_functions.sh &&
	setup_xfree > /dev/null 2>&1 &&
	setup_modules > /dev/null 2>&1 &&
	setup_network > /dev/null 2>&1 &&
	#setup_printers > /dev/null 2>&1 &&
	setup_sessions > /dev/null 2>&1 &&
	touch /etc/alx-config/imported )
	evaluate_retval
	fi
	fi
	}
50
	# this thingy needs an complete rewrite.
	# first get all settings from db server,
	# than check against local system settings,
	# if there are any differences, update the local settings,
	# as the server has a higher priority.
	# Important: write local settings only if they make sense,
	#            to have a fallback in case the server is down!
	#get_settings_from_server(){
	# #some needed arrays
	# #ARRAY_NETWORK #module domain networking netmask dns gateway
	# #SESSION #
	# #GRAFIK  #
	#
	# echo "Importing now old Settings ..."
	#
	# local serial module domain networking netmask dns gateway i x all
	#
	# declare -i i=0
	#
	# #get hostname from database
	# MY_HOSTNAME=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select hostname from cfg_serial where id='${ALX_SERIAL}'")
	#
	# #get network settings from database
	# all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select module,
	# domain,
	# networking,
	# netmask,
	# dns,
	# gateway,
	# broadcast,
	# ip
	# from cfg_network where serial='${ALX_SERIAL}'")
	# #split'em up and put in array
	# for x in ${all}
	# do
	# ARRAY_NETWORK[${i}]=${x}
	# ((i++))
	# done
	# echo " Network:"
	# echo "   MODULE:     ${ARRAY_NETWORK[0]}"
	# echo "   IP:         ${ARRAY_NETWORK[7]}"
	# echo "   HOSTNAME:   ${MY_HOSTNAME}"
	# echo "   DOMAIN:     ${ARRAY_NETWORK[1]}"
	# echo "   NETWORKING: ${ARRAY_NETWORK[2]}"
	# echo "   NETMASK:    ${ARRAY_NETWORK[3]}"
	# echo "   DNS:        ${ARRAY_NETWORK[4]}"
	# echo "   GATEWAY:    ${ARRAY_NETWORK[5]}"
	# echo "   BROADCAST:  ${ARRAY_NETWORK[6]}"
	# echo
	#
	# #get x settings from database
	# local module resolution
	#
	# #reset i
	# declare -i i=0
	# all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select module,
	# resolution
	# from cfg_grafik where serial='${ALX_SERIAL}'")
	# #split'em up and put in array
	# for x in ${all}
	# do
	# ARRAY_GRAFIK[${i}]=${x}
	# ((i++))
	# done
	#
	# echo " VGA:"
	# echo "   MODULE:     ${ARRAY_GRAFIK[0]}"
	# echo "   RESOLUTION: ${ARRAY_GRAFIK[1]}"
	# echo
	#
	# #get ica-sessions from database
	# ARRAY_SESSIONS=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select session from cfg_session where serial='${ALX_SERIAL}'")
	#
	# echo " SESSIONS:"
	# declare -i i=0
	# for x in ${ARRAY_SESSIONS}
	# do
	# ((i++))
	# echo "   SESSION${i}:   ${x}"
	# done
	# echo
	#
	# #now write these settings
	# local SETTINGSPATH
	#
	# #network
	#
	# #settings must be also set on system, so we put this to menu
	# SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	#
	# [ ! -d ${SETTINGSPATH}/modules ] && install -d ${SETTINGSPATH}/modules
	# echo "${ARRAY_NETWORK[0]}" > ${SETTINGSPATH}/modules/modules
	#
	# [ ! -d ${SETTINGSPATH}/network ] && install -d ${SETTINGSPATH}/network
	# echo "${MY_HOSTNAME}" > ${SETTINGSPATH}/network/hostname
	# echo "${ARRAY_NETWORK[1]}" > ${SETTINGSPATH}/network/domain
	# echo "${ARRAY_NETWORK[2]}" > ${SETTINGSPATH}/network/networking
	# [ -n "${ARRAY_NETWORK[3]}" ] && echo "${ARRAY_NETWORK[3]}" > ${SETTINGSPATH}/network/netmask
	# [ -n "${ARRAY_NETWORK[4]}" ] && echo "${ARRAY_NETWORK[4]}" > ${SETTINGSPATH}/network/dns
	# [ -n "${ARRAY_NETWORK[5]}" ] && echo "${ARRAY_NETWORK[5]}" > ${SETTINGSPATH}/network/gateway
	# [ -n "${ARRAY_NETWORK[6]}" ] && echo "${ARRAY_NETWORK[6]}" > ${SETTINGSPATH}/network/broadcast
	# [ -n "${ARRAY_NETWORK[7]}" ] && echo "${ARRAY_NETWORK[7]}" > ${SETTINGSPATH}/network/ip
51
52		update_system_settings(){
53		echo -e ${COLMAGENTA}"Checking system setup ..."${COLDEFAULT}
54
55	validate_networking(){	# imports network settings from db
56	#source /opt/alx-config/Configurator/config_functions.sh	config_networking
	local x i all LOCAL_NETWORK DB_NETWORK SETTINGSPATH
	#all arrays:
	# ->  hostname modules domain networking ip netmask dns gateway broadcast
	#networking
	#get settings from local system
	SETTINGSPATH=${SETTINGS_TEMPLATE}/system
	declare -i i=0
	for x in network/hostname \
	modules/modules \
	network/domain \
	network/networking \
	network/ip \
	network/netmask \
	network/dns \
	network/gateway \
	network/broadcast
	do
	if [ -f ${SETTINGSPATH}/${x} ]
	then
	#file exist, then use content
	LOCAL_NETWORK[${i}]="$(< ${SETTINGSPATH}/${x})"
	else
	LOCAL_NETWORK[${i}]=""
	fi
	((i++))
	done
	#get settings from database
	# DB_NETWORK[0]=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select hostname from cfg_network where serial='${ALX_SERIAL}'")
	all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select hostname,
	module,
	domain,
	networking,
	ip,
	netmask,
	dns,
	gateway,
	broadcast
	from cfg_network where serial='${ALX_SERIAL}'")
	#split'em up and put in an array
	declare -i i=0
	for x in ${all}
	do
	DB_NETWORK[${i}]=${x}
	((i++))
	done
	#needed by the small hotfix
	local FIX_ME
	FIX_ME="${DB_NETWORK[2]}"
	#now compare this stuff if they are equal
	for ((i=0; i < 9; i++))
	do
	if [ "${DB_NETWORK[${i}]}" = "${LOCAL_NETWORK[${i}]}" ]
	then
	echo "${i}: ${DB_NETWORK[${i}]} == ${LOCAL_NETWORK[${i}]}"
	#delete equal stuff from DB_NETWORK
	DB_NETWORK[${i}]="*NULL*"
	else
	echo "${i}: ${DB_NETWORK[${i}]} != ${LOCAL_NETWORK[${i}]}"
	fi
	done
	#update configs
	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	declare -i i=0
	for x in network/hostname \
	modules/modules \
	network/domain \
	network/networking \
	network/ip \
	network/netmask \
	network/dns \
	network/gateway \
	network/broadcast
	do
	#update only staff wich wasn't overwritten
	if [ "${DB_NETWORK[${i}]}" != "*NULL*" ]
	then
	#create directory if not exist
	if [ ! -d $(dirname ${SETTINGSPATH}/${x}) ]
	then
	install -d $(dirname ${SETTINGSPATH}/${x})
	fi
	echo "${DB_NETWORK[${i}]}" > ${SETTINGSPATH}/${x}
	# theses fucking config functions:
	# network gets only updated,
	# if ${SETTINGS_TEMPLATE}/menu/network/networking exist
	# so we force an update here
	if [ ! -f ${SETTINGSPATH}/network/networking ]
	then
	[ ! -d ${SETTINGSPATH}/network ] && install -d ${SETTINGSPATH}/network
	echo "${FIX_ME}" > ${SETTINGSPATH}/network/networking
	fi
	#set update flag
	ALX_NETWORK_SETUP=true
	fi
	((i++))
	done
	}
	validate_xserver(){
	#source /opt/alx-config/Configurator/config_functions.sh
	local x i all LOCAL_XSERVER DB_XSERVER SETTINGSPATH
	#all arrays:
	# ->  xmodule resolution depth mouse monvendor monmodel hsync vref
57
58	#xserver	# imports x11 settings from db
59	#get settings from local system	config_x11
	#vga
	SETTINGSPATH=${SETTINGS_TEMPLATE}/system
	declare -i i=0
	for x in vga/vga \
	vga/vgares \
	vga/vgadepth
	do
	if [ -f ${SETTINGSPATH}/${x} ]
	then
	#file exist, then use content
	LOCAL_XSERVER[${i}]="$(< ${SETTINGSPATH}/${x})"
	else
	LOCAL_XSERVER[${i}]=""
	fi
	((i++))
	done
	#mouse
	if [ -f ${SETTINGSPATH}/mouse/mouse ]
	then
	#file exist, then use content
	LOCAL_XSERVER[3]="$(< ${SETTINGSPATH}/mouse/mouse)"
	else
	LOCAL_XSERVER[3]=""
	fi
	#monitor
	local myvendor mymodel hsync vref
	if [ -f ${SETTINGSPATH}/monitor/monitor ]
	then
	source ${SETTINGSPATH}/monitor/monitor
	declare -i i=4
	for x in "${myvendor}" \
	"${mymodel}" \
	"${hsync}" \
	"${vref}"
	do
	LOCAL_XSERVER[${i}]="${x}"
	((i++))
	done
	else
	LOCAL_XSERVER[4]=""
	LOCAL_XSERVER[5]=""
	LOCAL_XSERVER[6]=""
	LOCAL_XSERVER[7]=""
	fi
	#get settings from database
	all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select module,
	resolution,
	depth
	from cfg_graphic where serial='${ALX_SERIAL}'")
	#split'em up and put in an array
	declare -i i=0
	for x in ${all}
	do
	DB_XSERVER[${i}]=${x}
	((i++))
	done
	# read mouse
	DB_XSERVER[3]=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select mouse from cfg_input where serial='${ALX_SERIAL}'")
	#monitors
	# all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select vendor,
	# model,
	# hsync,
	# vrefresh
	# from cfg_monitor where serial='${ALX_SERIAL}'")
	all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select vendor,
	model,
	hsync,
	vrefresh
	from list_monitors
	inner join cfg_graphic
	on cfg_graphic.monitorid=list_monitors.id;")
	#split'em up and put in an array
	declare -i i=4
	for x in ${all}
	do
	DB_XSERVER[${i}]=${x}
	((i++))
	done
	# #now compare this stuff if they are equal
	# for ((i=0; i < 8; i++))
	# do
	# if [ "${DB_XSERVER[${i}]}" = "${LOCAL_XSERVER[${i}]}" ]
	# then
	# echo "${i}: ${DB_XSERVER[${i}]} == ${LOCAL_XSERVER[${i}]}"
	#
	# #delete equal stuff from DB_NETWORK
	# DB_XSERVER[${i}]="*NULL*"
	#
	# else
	# echo "${i}: ${DB_XSERVER[${i}]} != ${LOCAL_XSERVER[${i}]}"
	# fi
	# done
	#
	#
	# #update configs
	# SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	# #xserver general
	# declare -i i=0
	# for x in vga/vga \
	# vga/vgares \
	# vga/vgadepth \
	# mouse/mouse
	# do
	# #update only staff wich wasn't overwritten
	# if [ "${DB_XSERVER[${i}]}" != "*NULL*" ]
	# then
	# #create directory if not exist
	# if [ ! -d $(dirname ${SETTINGSPATH}/${x}) ]
	# then
	# install -d $(dirname ${SETTINGSPATH}/${x})
	# fi
	# echo "${DB_XSERVER[${i}]}" > ${SETTINGSPATH}/${x}
	# #set update flag
	# ALX_XSERVER_SETUP=true
	# fi
	# ((i++))
	# done
	#
	# #xserver monitors
	# if [ "${DB_XSERVER[4]}" != "*NULL*" \
	# -o "${DB_XSERVER[5]}" != "*NULL*" \
	# -o "${DB_XSERVER[6]}" != "*NULL*" \
	# -o "${DB_XSERVER[7]}" != "*NULL*" ]
	# then
	# if [ ! -d ${SETTINGSPATH}/monitor ]
	# then
	# install -d ${SETTINGSPATH}/monitor
	# fi
	# echo "myvendor=\"${DB_XSERVER[4]}\"" > ${SETTINGSPATH}/monitor/monitor
	# echo "mymodel=\"${DB_XSERVER[5]}\"" >> ${SETTINGSPATH}/monitor/monitor
	# echo "hsync=\"${DB_XSERVER[6]}\"" >> ${SETTINGSPATH}/monitor/monitor
	# echo "vref=\"${DB_XSERVER[7]}\"" >> ${SETTINGSPATH}/monitor/monitor
	#
	# #set update flag
	# ALX_XSERVER_SETUP=true
	# fi
	# - damn fucking setup_xfree routine need to rewrite this fucking stuff -
	# setup_xfree will only run
	# if ${SETTINGS_TEMPLATE}/menu/vga/vga exist
	# so we must *always* update *all* settings if something has changed
	#now compare this stuff if they are equal
	for ((i=0; i < 8; i++))
	do
	if [ "${DB_XSERVER[${i}]}" = "${LOCAL_XSERVER[${i}]}" ]
	then
	echo "${i}: ${DB_XSERVER[${i}]} == ${LOCAL_XSERVER[${i}]}"
	#delete equal stuff from DB_NETWORK
	#DB_XSERVER[${i}]="*NULL*"
	else
	echo "${i}: ${DB_XSERVER[${i}]} != ${LOCAL_XSERVER[${i}]}"
	fi
	done
60
61	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu	# imports session settings from db
62	if [ "${DB_XSERVER[0]}" != "*NULL*" \	config_sessions
	-o "${DB_XSERVER[1]}" != "*NULL*" \
	-o "${DB_XSERVER[2]}" != "*NULL*" \
	-o "${DB_XSERVER[3]}" != "*NULL*" \
	-o "${DB_XSERVER[4]}" != "*NULL*" \
	-o "${DB_XSERVER[5]}" != "*NULL*" \
	-o "${DB_XSERVER[6]}" != "*NULL*" \
	-o "${DB_XSERVER[7]}" != "*NULL*" ]
	then
	[ ! -d ${SETTINGSPATH}/vga ] && install -d ${SETTINGSPATH}/vga
	[ ! -d ${SETTINGSPATH}/mouse ] && install -d ${SETTINGSPATH}/mouse
	[ ! -d ${SETTINGSPATH}/monitor ] && install -d ${SETTINGSPATH}/monitor
	echo "${DB_XSERVER[0]}" > ${SETTINGSPATH}/vga/vga
	echo "${DB_XSERVER[1]}" > ${SETTINGSPATH}/vga/vgares
	echo "${DB_XSERVER[2]}" > ${SETTINGSPATH}/vga/vgadepth
	echo "${DB_XSERVER[3]}" > ${SETTINGSPATH}/mouse/mouse
	echo "myvendor=\"${DB_XSERVER[4]}\"" > ${SETTINGSPATH}/monitor/monitor
	echo "mymodel=\"${DB_XSERVER[5]}\"" >> ${SETTINGSPATH}/monitor/monitor
	echo "hsync=\"${DB_XSERVER[6]}\"" >> ${SETTINGSPATH}/monitor/monitor
	echo "vref=\"${DB_XSERVER[7]}\"" >> ${SETTINGSPATH}/monitor/monitor
	#set update flag
	ALX_XSERVER_SETUP=true
	fi
	}
63
64		# imports printer settings from db
65		config_printing
66
67	validate_sessions(){	# imports auth settings from db
68	#source /opt/alx-config/Configurator/config_functions.sh	config_auth
69
70	local x i all LOCAL_SESSIONS DB_SESSIONS SETTINGSPATH count	# exchange ssh rsa keys
71		config_ssh_auth
	#all arrays:
	# ->  session1 session2 ... sessionN
	#no LOCAL_SESSIONS here, needs bubblesort
	#get settings from database
	all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select session from cfg_sessions where serial='${ALX_SERIAL}'")
	#split'em up and put in an array (only if $all not zero)
	declare -i i=0
	if [ -n "${all}" ]
	then
	for x in ${all}
	do
	DB_SESSIONS[${i}]=${x}
	((i++))
	done
	count=${i}
	else
	count=0
	fi
	## no compare here, can only done with bubblesort or s.th like that
	# shows only the new sessions
	declare -i i=0
	#count=${#DB_SESSIONS[*]} #---> not working gets always 1, why ?
	echo "Number of new sessions: ${count}"
	for ((i=0; i < count; i++))
	do
	echo "${i} - ${DB_SESSIONS[${i}]}"
	done
	#update local configs
	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	declare -i i=0
	#count=${#DB_SESSIONS[*]}
	if [ ${count} -gt 0 ]
	then
	#create directory if not exist
	[ ! -d ${SETTINGSPATH}/sessions ] && install -d ${SETTINGSPATH}/sessions
	#delete old sessions
	echo -n > ${SETTINGSPATH}/sessions/sessions
	for ((i=0; i < count; i++))
	do
	echo "${DB_SESSIONS[${i}]}" >> ${SETTINGSPATH}/sessions/sessions
	done
	#set update flag
	ALX_SESSION_SETUP=true
	fi
	}
	validate_printing(){
	#source /opt/alx-config/Configurator/config_functions.sh
	local x i k all LOCAL_PRINTER DB_PRINTER SETTINGSPATH count
	#all arrays: [2 dimensions !]
	# ->  name1 name2 ... nameN
	# ->  name1 printingport ip share
	#later on, for now -> name1 port1 ip1 share1 name2 ....
	# seperator is 4
	#local PRINTERNAME PRINTING IP SHARE
	# update *always* printers from database;
	# compare with local settings cannot be done yet
	#get settings from database
	all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select printer_name,
	port,
	ip,
	share
	from cfg_printers where serial='${ALX_SERIAL}'")
	#split'em up and put in an array
	declare -i i=0
	declare -i k=0
	if [ -n "${all}" ]
	then
	for x in ${all}
	do
	((k++))
	DB_PRINTER[${i}]="${DB_PRINTER[${i}]} ${x}"
	if [ ${k} -eq 4 ]
	then
	((i++))
	#reset $k
	declare -i k=0
	fi
	done
	count=${i}
	else
	count=0
	fi
	#echo settings
	echo "Number of new printers: ${count}"
	for ((i=0; i < count; i++))
	do
	echo "${i} printer:"
	for x in ${DB_PRINTER[${i}]}
	do
	echo "    ${x}"
	done
	done
	#import settings (only if counter > 0)
	local prnset
	#delete all printers (*always*)
	if [ -d ${SETTINGS_TEMPLATE}/system/printing ]
	then
	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	[ -d ${SETTINGSPATH}/delete ] && rm -rf ${SETTINGSPATH}/delete
	install -d ${SETTINGSPATH}/delete
	mv -f ${SETTINGS_TEMPLATE}/system/printing/* ${SETTINGSPATH}/delete
	rm -rf ${SETTINGS_TEMPLATE}/system/printing
	#set update flag (*always*)
	ALX_PRINTER_SETUP=true
	fi
	if [ ${count} -gt 0 ]
	then
	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	[ ! -d ${SETTINGSPATH}/printing ] && install -d ${SETTINGSPATH}/printing
	for ((i=0; i < count; i++))
	do
	declare -i k=0
	for x in ${DB_PRINTER[${i}]}
	do
	prnset[${k}]=${x}
	((k++))
	done
	echo "PRINTERNAME=${prnset[0]}" >  ${SETTINGSPATH}/printing/${prnset[0]}
	echo "PRINTING=${prnset[1]}" >> ${SETTINGSPATH}/printing/${prnset[0]}
	echo "IP=${prnset[2]}" >> ${SETTINGSPATH}/printing/${prnset[0]}
	echo "SHARE=${prnset[3]}" >> ${SETTINGSPATH}/printing/${prnset[0]}
	done
	#set update flag (*always*)
	ALX_PRINTER_SETUP=true
	fi
	}
	update_system_settings(){
	source /opt/alx-config/Configurator/config_functions.sh
	echo -e ${COLMAGENTA}"Checking system setup ..."${COLDEFAULT}
	echo
	echo "network"
	validate_networking
	echo
	echo "xserver"
	validate_xserver
	echo
	echo "sessions"
	validate_sessions
	echo
	#echo "printers"
	#validate_printing
	#echo
	if [ "${ALX_NETWORK_SETUP}" == "true" ]
	then
	echo -e ${COLMAGENTA}"Updating network settings"${COLDEFAULT}
	setup_modules
	setup_network
	fi
	if [ "${ALX_XSERVER_SETUP}" == "true" ]
	then
	echo -e ${COLMAGENTA}"Updating xserver settings"${COLDEFAULT}
	setup_xfree
	fi
	if [ "${ALX_SESSION_SETUP}" == "true" ]
	then
	echo -e ${COLMAGENTA}"Updating session settings"${COLDEFAULT}
	setup_sessions
	fi
	#if [ "${ALX_PRINTER_SETUP}" == "true" ]
	#then
	# echo -e ${COLMAGENTA}"Updating printer settings"${COLDEFAULT}
	# setup_printers
	#fi
	#clean up temp files
	local SETTINGSPATH
	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	#[ -d ${SETTINGSPATH} ] && rm -rf ${SETTINGSPATH}
72	}	}
73
74	get_system_serial(){	get_system_serial(){
#	Line 778  get_system_serial(){	Line 76  get_system_serial(){
76	local CUR_IP CUR_MAC CUR_MTIME	local CUR_IP CUR_MAC CUR_MTIME
77
78	#check if serial file exists	#check if serial file exists
79	if [ -f /etc/alx-config/serial ]	if [ -f /etc/alxconfig-ng/serial ]
80	then	then
81	source /etc/alx-config/serial	source /etc/alxconfig-ng/serial
82
83	# if system is already configured, it *has* a hostname.	#start preliminary networking (dhcp)
	# so we take the hostname of this system here
	source /etc/hostname
	#start preliminary networking (dhcp)
84	preliminary_network start	preliminary_network start
85
86	CUR_IP=$(/sbin/ifconfig eth0 | sed -n '/addr:/s/ [^r]*..//gp')	CUR_IP=$(/sbin/ifconfig eth0 | sed -n '/addr:/s/ [^r]*..//gp')
87	CUR_MAC=$(/sbin/ifconfig eth0 | grep HWaddr | cut -d ' ' -f11)	CUR_MAC=$(/sbin/ifconfig eth0 | grep HWaddr | cut -d ' ' -f11)
88	CUR_MTIME=$(date +%s)	CUR_MTIME=$(date +%s)
89
90	echo -e ${COLOREDSTAR} "Trying to validate my serial ..."	echo -e ${COLOREDSTAR} "Trying to validate my serial ..."
91
92	#nice serial output	#nice serial output
93	$CURS_UP	$CURS_UP
94	$SET_WCOL	$SET_WCOL
95	echo "[ SN: ${ALX_SERIAL} ]"	echo "[ SN: ${ALX_SERIAL} ]"
	# #is this system outdated ?
	# #MY_HOSTNAME=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# # "select hostname from cfg_serial where id='${ALX_SERIAL}'")
	#
	# #we do this now with the date instead of the hostname
	# local MY_ALX_REG_DATE
	# MY_ALX_REG_DATE=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select mtime from client_serial where serial='${ALX_SERIAL}'")
	#
	# #if [ "${MY_HOSTNAME}" == "${HOSTNAME}" ]
	# if [ "${MY_ALX_REG_DATE}" == "${ALX_REG_DATE}" ]
	# then
	# #set ALX_STATE to ok so everybody that everything was ok
	# ALX_STATE=ok
	#
	# evaluate_retval
	# else
	# #print false (works only if this is the first statement here)
	# evaluate_retval
	#
	# #set ALX_STATE to error so everybody sees there was an error
	# ALX_STATE=error
	# fi
96
97	if validate_serial "${ALX_SERIAL}" "${ALX_REG_DATE}" "${CUR_MAC}"	if validate_serial "${ALX_SERIAL}" "${ALX_REG_DATE}" "${CUR_MAC}"
98	then	then
#	Line 837  get_system_serial(){	Line 107  get_system_serial(){
107	echo -e ${COLMAGENTA}"Preparing system for first boot"${COLDEFAULT}	echo -e ${COLMAGENTA}"Preparing system for first boot"${COLDEFAULT}
108	ALX_HW_DETECT=true	ALX_HW_DETECT=true
109	/etc/init.d/hwdetect start	/etc/init.d/hwdetect start
110
111	#set hostname to alx_default_hostname	#set hostname to alx_default_hostname
112	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx
113	HOSTNAME="${ALX_DEFAULT_HOSTNAME}"	HOSTNAME="${ALX_DEFAULT_HOSTNAME}"
114
115	#update the hostname on the system for sure	#update the hostname on the system for sure
116	echo "HOSTNAME=${HOSTNAME}" > /etc/hostname	echo "${HOSTNAME}" > /etc/hostname
117
118	#start preliminary networking (dhcp)	#start preliminary networking (dhcp)
119	preliminary_network start	preliminary_network start
120
121	CUR_IP=$(/sbin/ifconfig eth0 | sed -n '/addr:/s/ [^r]*..//gp')	CUR_IP=$(/sbin/ifconfig eth0 | sed -n '/addr:/s/ [^r]*..//gp')
122	CUR_MAC=$(/sbin/ifconfig eth0 | grep HWaddr | cut -d ' ' -f11)	CUR_MAC=$(/sbin/ifconfig eth0 | grep HWaddr | cut -d ' ' -f11)
123	CUR_MTIME=$(date +%s)	CUR_MTIME=$(date +%s)
124
125	echo -e ${COLOREDSTAR} "Trying to get new serial ..."	echo -e ${COLOREDSTAR} "Trying to get new serial ..."
126
127	#request new serial	#request new serial
128	#ALX_REG_DATE="$(date +%F)"	#ALX_REG_DATE="$(date +%F)"
129
130	#we're using the mtime now (better for vaildating the serial)	#we're using the mtime now (better for vaildating the serial)
131	mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \	mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
132	"insert into client_serials(	"insert into client_serials(
#	Line 867  get_system_serial(){	Line 137  get_system_serial(){
137	'${CUR_MTIME}',	'${CUR_MTIME}',
138	'${CUR_MAC}'	'${CUR_MAC}'
139	);"	);"
140
141	#then validate and retrieve serial	#then validate and retrieve serial
142
143	### warning must be changed that only the LAST ID will be fetched,  ###	### warning must be changed that only the LAST ID will be fetched,  ###
144	### or you get error if the computer name and date are the same     ###	### or you get error if the computer name and date are the same     ###
145	### you have more then one serial number than                       ###	### you have more than one serial number then                       ###
146
	#not 100% working may get more than *one* id
	#ALX_SERIAL=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select id from cfg_serial where datum='${ALX_REG_DATE}' and hostname='${HOSTNAME}'")
147	#select highest id only (added max)	#select highest id only (added max)
148	ALX_SERIAL=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \	ALX_SERIAL=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
149	"select max(serial) from client_serials where mtime='${CUR_MTIME}' and mac='${CUR_MAC}'")	"select max(serial) from client_serials where mtime='${CUR_MTIME}' and mac='${CUR_MAC}'")
#	Line 888  get_system_serial(){	Line 154  get_system_serial(){
154	$CURS_UP	$CURS_UP
155	$SET_WCOL	$SET_WCOL
156	echo "[ SN: ${ALX_SERIAL} ]"	echo "[ SN: ${ALX_SERIAL} ]"
157
158	#set ALX_STATE to ok so everybody that everything was ok	#set ALX_STATE to ok so everybody that everything was ok
159	ALX_STATE=ok	ALX_STATE=ok
160
161	echo "ALX_SERIAL=${ALX_SERIAL}" > /etc/alx-config/serial	echo "ALX_SERIAL=${ALX_SERIAL}" > /etc/alxconfig-ng/serial
162	echo "ALX_REG_DATE=${CUR_MTIME}" >> /etc/alx-config/serial	echo "ALX_REG_DATE=${CUR_MTIME}" >> /etc/alxconfig-ng/serial
163
164	evaluate_retval	evaluate_retval
165	else	else
166	#print false (works only if this is the first statement here)	#print false (works only if this is the first statement here)
167	evaluate_retval	evaluate_retval
168
169	#set ALX_STATE to error so everybody sees there was an error	#set ALX_STATE to error so everybody sees there was an error
170	ALX_STATE=error	ALX_STATE=error
171
172	#show an error that no new serial was found	#show an error that no new serial was found
173	#nice serial output	#nice serial output
174	$CURS_UP	$CURS_UP
#	Line 910  get_system_serial(){	Line 176  get_system_serial(){
176	echo -e "[ SN: ${COLRED}None, 0${COLDEFAULT} ]"	echo -e "[ SN: ${COLRED}None, 0${COLDEFAULT} ]"
177	fi	fi
178	fi	fi
179
180	#write current state to temp file	#write current state to temp file
181	echo "ALX_STATE=${ALX_STATE}" > /etc/alx-config/state/state	echo "ALX_STATE=${ALX_STATE}" > /etc/alxconfig-ng/state/state
182	}	}
183
184
185	check_is_configured() {	check_is_configured() {
186	if [ -f /etc/alx-config/state/configured ]	if [ -f /etc/alxconfig-ng/state/configured ]
187	then	then
188	export ALX_CONFIGURED=true	export ALX_CONFIGURED=true
189	else	else
#	Line 930  check_is_configured() {	Line 196  check_is_configured() {
196	import_settings_to_db() {	import_settings_to_db() {
197	#note: networking is always 'dhcp' if hw was autodetected	#note: networking is always 'dhcp' if hw was autodetected
198	#note: default_domain/hostname is set in config.rc	#note: default_domain/hostname is set in config.rc
199
200	#to be safe, we do some sanity checks	#to be safe, we do some sanity checks
201	[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain	[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain
202	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx
203
204	#vars used by hwdetect	#vars used by hwdetect
205	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
206	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
207	local MOUSETYPE XMOUSETYPE FULLNAME DEVICE	local MOUSETYPE XMOUSETYPE FULLNAME DEVICE
208
209	#get setting from hwdetect	#get setting from hwdetect
210	source /etc/sysconfig/hwsetup/knoppix	source /etc/sysconfig/hwsetup/knoppix
211	source /etc/sysconfig/hwsetup/mouse	source /etc/sysconfig/hwsetup/mouse
212
213	echo	echo
214	echo -e ${COLMAGENTA}"Importing detected settings to database"${COLDEFAULT}	echo -e ${COLMAGENTA}"Importing detected settings to database"${COLDEFAULT}
215
216	#network	#network
217	echo -e "      Network settings ..."	echo -e "      Network settings ..."
218	mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \	mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
#	Line 965  import_settings_to_db() {	Line 231  import_settings_to_db() {
231	'dhcp'	'dhcp'
232	);"	);"
233	evaluate_retval	evaluate_retval
234
235	#xserver	#xserver
236	echo -e "      Graphic settings ..."	echo -e "      Graphic settings ..."
237	#xserver general	#xserver general
#	Line 974  import_settings_to_db() {	Line 240  import_settings_to_db() {
240	serial,	serial,
241	module,	module,
242	resolution,	resolution,
243	depth	depth,
244		monitorid
245	)	)
246	values(	values(
247	'${ALX_SERIAL}',	'${ALX_SERIAL}',
248	'${XMODULE}',	'${XMODULE}',
249	'1024x768',	'1024x768',
250	'16'	'16',
251	);";	'0'
252	#xserver monitor	);"; )
253	mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \	evaluate_retval
254	"insert into cfg_monitor(
255		# input
256		echo -e "      Input settings ..."
257		mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
258		"insert into cfg_input(serial,mouse) values('${ALX_SERIAL}','${XMOUSETYPE}');"
259		evaluate_retval
260
261		# auth
262		echo -e "      Authentifcation settings ..."
263		mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
264		"insert into client_auth(
265	serial,	serial,
266	vendor,	username,
267	model,	shell,
268	hsync,	vnc,
269	vrefresh	samba,
270		station
271	)	)
272	values(	values(
273	'${ALX_SERIAL}',	'${ALX_SERIAL}',
274	'Aamazing',	'${ALX_UNPRIV_USER}',
275	'CM-1528-FS',	'',
276	'28-64',	'',
277	'47-104'	'',
278	);";	''
279		);"
280		evaluate_retval
281
282	# input	# input
283	mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \	echo -e "      Autostart settings ..."
284	"insert into cfg_input(serial,mouse) values('${ALX_SERIAL}','${XMOUSETYPE}');";)	mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
285		"insert into cfg_autostart(serial,session) values('${ALX_SERIAL}','');"
286	evaluate_retval	evaluate_retval
287	}	}
288
289	# imports current settings to the local system resolved by the hardware detection	# imports current settings to the local system resolved by the hardware detection
290		# we only need the network settings
291	import_settings_local(){	import_settings_local(){
292	#note: networking is always 'dhcp' if hw was autodetected	#note: networking is always 'dhcp' if hw was autodetected
293	#note: default_domain/hostname is set in config.rc	#note: default_domain/hostname is set in config.rc
294
295	#to be safe, we do some sanity checks	#to be safe, we do some sanity checks
296	[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain	[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain
297	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx
298
299	#vars used by hwdetect	#vars used by hwdetect
300	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
301	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
302	local MOUSETYPE XMOUSETYPE FULLNAME DEVICE	local MOUSETYPE XMOUSETYPE FULLNAME DEVICE
303
304	#get setting from hwdetect	#get setting from hwdetect
305	source /etc/sysconfig/hwsetup/knoppix	source /etc/sysconfig/hwsetup/knoppix
306	source /etc/sysconfig/hwsetup/mouse
307	echo	echo
308	echo -e ${COLMAGENTA}"Importing detected settings to local system"${COLDEFAULT}	echo -e ${COLMAGENTA}"Importing detected settings to local system"${COLDEFAULT}
309
310		[ ! -d ${SETTINGSPATH} ] && install -d ${SETTINGSPATH}
311	#allready configured, no update needed so we put it to system	echo "${NETCARD_DRIVER}" > ${SETTINGSPATH}/modules
	SETTINGSPATH=${SETTINGS_TEMPLATE}/system
	#network
	echo -e "      Network settings ..."
	[ ! -d ${SETTINGSPATH}/modules ] && install -d ${SETTINGSPATH}/modules
	echo "${NETCARD_DRIVER}" > ${SETTINGSPATH}/modules/modules
	[ ! -d ${SETTINGSPATH}/network ] && install -d ${SETTINGSPATH}/network
	( echo "${ALX_DEFAULT_HOSTNAME}" > ${SETTINGSPATH}/network/hostname;
	echo "${ALX_DEFAULT_DOMAIN}" > ${SETTINGSPATH}/network/domain;
	echo "dhcp" > ${SETTINGSPATH}/network/networking )
312	evaluate_retval	evaluate_retval
313
	#xserver
	echo -e "      Graphic settings ..."
	[ ! -d ${SETTINGSPATH}/vga ] && install -d ${SETTINGSPATH}/vga
	[ ! -d ${SETTINGSPATH}/mouse ] && install -d ${SETTINGSPATH}/mouse
	[ ! -d ${SETTINGSPATH}/monitor ] && install -d ${SETTINGSPATH}/monitor
	( echo "${XMODULE}" > ${SETTINGSPATH}/vga/vga;
	echo "16" > ${SETTINGSPATH}/vga/vgadepth;
	echo "1024x768" > ${SETTINGSPATH}/vga/vgares;
	echo "${XMOUSETYPE}" > ${SETTINGSPATH}/mouse/mouse;
	echo "myvendor=\"Aamazing\"" > ${SETTINGSPATH}/monitor/monitor;
	echo "mymodel=\"CM-1528-FS\"" >> ${SETTINGSPATH}/monitor/monitor;
	echo "hsync=\"28-64\"" >> ${SETTINGSPATH}/monitor/monitor;
	echo "vref=\"47-104\"" >> ${SETTINGSPATH}/monitor/monitor;)
	evaluate_retval
314	#set system state to 'already configured'	#set system state to 'already configured'
315	touch /etc/alx-config/state/configured	touch /etc/alxconfig-ng/state/configured
316
317		# default passwords are bad
318		#usermod -p $(perl -e "printf(crypt('foobar','AD'))") root
319		#usermod -p $(perl -e "printf(crypt('foobar','AD'))") ${ALX_UNPRIV_USER}
320		#smbpasswd -a root foobar
321	}	}
322
323	#start|stop	#start|stop
324	preliminary_network(){	preliminary_network(){
325	local module	local module
326
327	if [ -f /etc/alx-config/state/configured ]	if [ -f /etc/alxconfig-ng/state/configured ]
328	then	then
329	#get module name	#get module name
330	module=$(cat ${SETTINGS_TEMPLATE}/system/modules/modules)	module=$(cat ${SETTINGSPATH}/modules)
331	modprobe ${module}	modprobe ${module}
332	else	else
333	#vars used by hwdetect	#vars used by hwdetect
334	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
335	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
336
337	#get setting from hwdetect	#get setting from hwdetect
338	source /etc/sysconfig/hwsetup/knoppix	source /etc/sysconfig/hwsetup/knoppix
339	modprobe ${NETCARD_DRIVER}	modprobe ${NETCARD_DRIVER}
340	fi	fi
341
342	case $1 in	case $1 in
343	start)	start)
344	# keeping like always safe:	# keeping like always safe:
#	Line 1097  preliminary_network(){	Line 352  preliminary_network(){
352	else	else
353	rm -f /var/run/dhcpcd-eth?.pid	rm -f /var/run/dhcpcd-eth?.pid
354	fi	fi
355
356	echo -e ${COLMAGENTA}"Starting preliminary network ... "${COLDEFAULT}	echo -e ${COLMAGENTA}"Starting preliminary network ... "${COLDEFAULT}
357	#dhcpcd &> /dev/null #&& echo "ok" || echo "false"	dhcpcd &> /dev/null
358
359	# aka_fix ########################################	# aka_fix ########################################
360	ifconfig eth0 128.20.222.222 netmask 255.255.0.0 up	#ifconfig eth0 128.20.222.222 netmask 255.255.0.0 up
361	route del default gw 128.20.50.13 &> /dev/null	#route del default gw 128.20.50.13 &> /dev/null
362	route add default gw 128.20.50.21 &> /dev/null	#route add default gw 128.20.50.21 &> /dev/null
363	echo "nameserver 128.20.50.21" > /etc/resolv.conf	#echo "nameserver 128.20.50.21" > /etc/resolv.conf
364	##################################################	##################################################
365
366	evaluate_retval	evaluate_retval
367	;;	;;
368
369	stop)	stop)
370	echo -e ${COLMAGENTA}"Stopping preliminary network ... "${COLDEFAULT}	echo -e ${COLMAGENTA}"Stopping preliminary network ... "${COLDEFAULT}
371	ifconfig eth0 down	ifconfig eth0 down
372	if ps -A|grep dhcpcd > /dev/null	if ps -A|grep dhcpcd > /dev/null
373	then	then
	#echo -en ${COLMAGENTA}"Stopping preliminary network ... "${COLDEFAULT}
374	dhcpcd -z  &> /dev/null	dhcpcd -z  &> /dev/null
375	fi	fi
376	evaluate_retval	evaluate_retval
377	;;	;;
378
379	*)	*)
380	echo "Usage: preliminary_network {start|stop}"	echo "Usage: preliminary_network {start|stop}"
381	;;	;;
#	Line 1133  case $1 in	Line 390  case $1 in
390	then	then
391	import_settings_to_db	import_settings_to_db
392	import_settings_local	import_settings_local
393
394		# here we should also exchange the ssh keys
395		# or the system cannot be rebooted after
396		# the first start via the alx-webadmin
397		config_ssh_auth
398	fi	fi
399
400	#now setup system configuration	#now setup system configuration
401	#alx_setup_or_whatever_it_will_be_called()	#alx_setup_or_whatever_it_will_be_called()
402	[ "${ALX_HW_DETECT}" == "false" ] && update_system_settings	[ "${ALX_HW_DETECT}" == "false" ] && update_system_settings
#	Line 1146  case $1 in	Line 408  case $1 in
408	stop)	stop)
409	#unset_alx_connected #--> now in alxsetstate-rc6	#unset_alx_connected #--> now in alxsetstate-rc6
410	# ! important !: del systemstate	# ! important !: del systemstate
411	[ -f /etc/alx-config/state/state ] && rm /etc/alx-config/state/state	[ -f /etc/alxconfig-ng/state/state ] && rm /etc/alxconfig-ng/state/state
412	sleep 0.1	sleep 0.1
413	;;	;;
414	*)	*)
415	echo "Usage: $0 {start|stop} ..."	echo "Usage: $0 {start|stop} ..."
416	;;	;;
417	esac	esac
418

---

Colored Diff Long Colored Diff Full Colored Diff Unidiff Context Diff Side by Side

Legend: Removed from v.221   changed lines   Added in v.252