Diff of /alx-src/branches/alxconf-060/init.d/alxsettings

Parent Directory | Revision Log | Patch

	revision 221 by niro, Tue Mar 8 20:49:14 2005 UTC	revision 307 by niro, Sun Aug 28 19:30:53 2005 UTC
#	Line 11	Line 11
11	#%before:	#%before:
12	#%after:	#%after:
13
14		# $Header: /home/cvsd/alx-cvs/alx-src/alxconfig-ng/init.d/alxsettings,v 1.18 2005-08-28 19:30:53 niro Exp $
15
16	# checks first if the client was already configured and if it has an valid serial	# checks first if the client was already configured and if it has an valid serial
17	# if not it runs the autoconfiguration script	# if not it runs the autoconfiguration script
18	# these settings will be used for client setup	# these settings will be used for client setup
#	Line 19	Line 21
21	# if no changes are at server side they will be kept, if yes the get updated.	# if no changes are at server side they will be kept, if yes the get updated.
22	# the server settings has higher priority.	# the server settings has higher priority.
23
	#                       +-----+
	#                       |start|
	#                       +-----+
	#                          |
	#                          |
	#              start_preliminary_network
	#                          |
	#                          |       n
	#                  serial_check ------->  get_new_serial
	#                          |                      |
	#                         y|                      |
	#                          |           n          |
	#                check_is_configured ---->  run_hw_detection
	#                          |                      |
	#                         y|                      |
	#            n             |                      |
	#        +--------cfg_equal_to_db          import_settings_to_db
	#        |                 |                      |
	#   update_from_db        y|                      |
	#        |                 |                      |
	#   set_is_configured      |                  set_is_configured
	#        +-----------------|                      |
	#                          +----------------------+
	#                          |
	#                          |
	#               stop_preliminary_network
	#                          |
	#                          |
	#                       +----+
	#                       |done|
	#                       +----+
	#                          |
	#                          |
	#                 normal_system_bootup
	#                          |
	#                          .
	#                          .
	#                          .
	#
	#
	#
24	source /etc/sysconfig/rc	source /etc/sysconfig/rc
25	source $rc_functions	source $rc_functions
26
27	#mysql settings	# mysql settings
28	source /etc/alx-config/config.rc	source /etc/alxconfig-ng/config.rc
	source /opt/alx-config/functions/mysqlfunctions
	source /opt/alx-config/functions/alx-mysql-functions
29
30	#check if mysql is available	# helper functions
31		source /usr/lib/alxconfig-ng/functions/mysqlfunctions
32		source /usr/lib/alxconfig-ng/functions/serial_functions
33		source /usr/lib/alxconfig-ng/functions/config_modules
34		source /usr/lib/alxconfig-ng/functions/config_network
35		source /usr/lib/alxconfig-ng/functions/config_printers
36		source /usr/lib/alxconfig-ng/functions/config_sessions
37		source /usr/lib/alxconfig-ng/functions/config_x11
38		source /usr/lib/alxconfig-ng/functions/config_auth
39		source /usr/lib/alxconfig-ng/functions/config_ssh_auth
40
41		# check if mysql is available
42	[ -x /usr/bin/mysql ] && MYSQL_ALX=true	[ -x /usr/bin/mysql ] && MYSQL_ALX=true
43
44	#other needed vars	# other needed vars
45	ALX_HW_DETECT=false	ALX_HW_DETECT=false
46	ALX_NETWORK_SETUP=false	ALX_FORCED_RECHECK=false
	ALX_XSERVER_SETUP=false
	ALX_SESSION_SETUP=false
	ALX_PRINTER_SETUP=false
47
48	#unset vars which may kill us	# unset vars which may kill us
49	unset ALX_SERIAL ALX_STATE	unset ALX_SERIAL ALX_STATE
50
51
52	#setup needed directories	# setup needed directories
53	[ ! -d /etc/alx-config/state ] && install -d /etc/alx-config/state	[ ! -d /etc/alxconfig-ng/state ] && install -d /etc/alxconfig-ng/state
54
55
56	# still a need to implement this ?	update_system_settings(){
57	# #needed to detect usb/livecd boot	echo -e ${COLMAGENTA}"Checking system setup ..."${COLDEFAULT}
	# if [ -e /.bootdev ]
	# then
	# source /.bootdev
	# else
	# echo "Couldn't find /.bootdev. Aborting."
	# exit 1
	# fi
	# still a need to implement this ? --> media-check ?
	settings_import() {
	if [ "${FSTYPE}" == "vfat" ]
	then
	if [ -e /mnt/cdrom/settings/system ]
	then
	echo -e ${COLOREDSTAR}"Importing old alx-settings ..."
	( cp -R /mnt/cdrom/settings/system/* /etc/alx-config/settings/menu &&
	source /etc/alx-config/config.rc &&
	source /opt/alx-config/Configurator/config_functions.sh &&
	setup_xfree > /dev/null 2>&1 &&
	setup_modules > /dev/null 2>&1 &&
	setup_network > /dev/null 2>&1 &&
	#setup_printers > /dev/null 2>&1 &&
	setup_sessions > /dev/null 2>&1 &&
	touch /etc/alx-config/imported )
	evaluate_retval
	fi
	fi
	}
	# this thingy needs an complete rewrite.
	# first get all settings from db server,
	# than check against local system settings,
	# if there are any differences, update the local settings,
	# as the server has a higher priority.
	# Important: write local settings only if they make sense,
	#            to have a fallback in case the server is down!
	#get_settings_from_server(){
	# #some needed arrays
	# #ARRAY_NETWORK #module domain networking netmask dns gateway
	# #SESSION #
	# #GRAFIK  #
	#
	# echo "Importing now old Settings ..."
	#
	# local serial module domain networking netmask dns gateway i x all
	#
	# declare -i i=0
	#
	# #get hostname from database
	# MY_HOSTNAME=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select hostname from cfg_serial where id='${ALX_SERIAL}'")
	#
	# #get network settings from database
	# all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select module,
	# domain,
	# networking,
	# netmask,
	# dns,
	# gateway,
	# broadcast,
	# ip
	# from cfg_network where serial='${ALX_SERIAL}'")
	# #split'em up and put in array
	# for x in ${all}
	# do
	# ARRAY_NETWORK[${i}]=${x}
	# ((i++))
	# done
	# echo " Network:"
	# echo "   MODULE:     ${ARRAY_NETWORK[0]}"
	# echo "   IP:         ${ARRAY_NETWORK[7]}"
	# echo "   HOSTNAME:   ${MY_HOSTNAME}"
	# echo "   DOMAIN:     ${ARRAY_NETWORK[1]}"
	# echo "   NETWORKING: ${ARRAY_NETWORK[2]}"
	# echo "   NETMASK:    ${ARRAY_NETWORK[3]}"
	# echo "   DNS:        ${ARRAY_NETWORK[4]}"
	# echo "   GATEWAY:    ${ARRAY_NETWORK[5]}"
	# echo "   BROADCAST:  ${ARRAY_NETWORK[6]}"
	# echo
	#
	# #get x settings from database
	# local module resolution
	#
	# #reset i
	# declare -i i=0
	# all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select module,
	# resolution
	# from cfg_grafik where serial='${ALX_SERIAL}'")
	# #split'em up and put in array
	# for x in ${all}
	# do
	# ARRAY_GRAFIK[${i}]=${x}
	# ((i++))
	# done
	#
	# echo " VGA:"
	# echo "   MODULE:     ${ARRAY_GRAFIK[0]}"
	# echo "   RESOLUTION: ${ARRAY_GRAFIK[1]}"
	# echo
	#
	# #get ica-sessions from database
	# ARRAY_SESSIONS=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select session from cfg_session where serial='${ALX_SERIAL}'")
	#
	# echo " SESSIONS:"
	# declare -i i=0
	# for x in ${ARRAY_SESSIONS}
	# do
	# ((i++))
	# echo "   SESSION${i}:   ${x}"
	# done
	# echo
	#
	# #now write these settings
	# local SETTINGSPATH
	#
	# #network
	#
	# #settings must be also set on system, so we put this to menu
	# SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	#
	# [ ! -d ${SETTINGSPATH}/modules ] && install -d ${SETTINGSPATH}/modules
	# echo "${ARRAY_NETWORK[0]}" > ${SETTINGSPATH}/modules/modules
	#
	# [ ! -d ${SETTINGSPATH}/network ] && install -d ${SETTINGSPATH}/network
	# echo "${MY_HOSTNAME}" > ${SETTINGSPATH}/network/hostname
	# echo "${ARRAY_NETWORK[1]}" > ${SETTINGSPATH}/network/domain
	# echo "${ARRAY_NETWORK[2]}" > ${SETTINGSPATH}/network/networking
	# [ -n "${ARRAY_NETWORK[3]}" ] && echo "${ARRAY_NETWORK[3]}" > ${SETTINGSPATH}/network/netmask
	# [ -n "${ARRAY_NETWORK[4]}" ] && echo "${ARRAY_NETWORK[4]}" > ${SETTINGSPATH}/network/dns
	# [ -n "${ARRAY_NETWORK[5]}" ] && echo "${ARRAY_NETWORK[5]}" > ${SETTINGSPATH}/network/gateway
	# [ -n "${ARRAY_NETWORK[6]}" ] && echo "${ARRAY_NETWORK[6]}" > ${SETTINGSPATH}/network/broadcast
	# [ -n "${ARRAY_NETWORK[7]}" ] && echo "${ARRAY_NETWORK[7]}" > ${SETTINGSPATH}/network/ip
	validate_networking(){
	#source /opt/alx-config/Configurator/config_functions.sh
	local x i all LOCAL_NETWORK DB_NETWORK SETTINGSPATH
	#all arrays:
	# ->  hostname modules domain networking ip netmask dns gateway broadcast
	#networking
	#get settings from local system
	SETTINGSPATH=${SETTINGS_TEMPLATE}/system
	declare -i i=0
	for x in network/hostname \
	modules/modules \
	network/domain \
	network/networking \
	network/ip \
	network/netmask \
	network/dns \
	network/gateway \
	network/broadcast
	do
	if [ -f ${SETTINGSPATH}/${x} ]
	then
	#file exist, then use content
	LOCAL_NETWORK[${i}]="$(< ${SETTINGSPATH}/${x})"
	else
	LOCAL_NETWORK[${i}]=""
	fi
	((i++))
	done
	#get settings from database
	# DB_NETWORK[0]=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select hostname from cfg_network where serial='${ALX_SERIAL}'")
	all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select hostname,
	module,
	domain,
	networking,
	ip,
	netmask,
	dns,
	gateway,
	broadcast
	from cfg_network where serial='${ALX_SERIAL}'")
	#split'em up and put in an array
	declare -i i=0
	for x in ${all}
	do
	DB_NETWORK[${i}]=${x}
	((i++))
	done
	#needed by the small hotfix
	local FIX_ME
	FIX_ME="${DB_NETWORK[2]}"
	#now compare this stuff if they are equal
	for ((i=0; i < 9; i++))
	do
	if [ "${DB_NETWORK[${i}]}" = "${LOCAL_NETWORK[${i}]}" ]
	then
	echo "${i}: ${DB_NETWORK[${i}]} == ${LOCAL_NETWORK[${i}]}"
	#delete equal stuff from DB_NETWORK
	DB_NETWORK[${i}]="*NULL*"
	else
	echo "${i}: ${DB_NETWORK[${i}]} != ${LOCAL_NETWORK[${i}]}"
	fi
	done
	#update configs
	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	declare -i i=0
	for x in network/hostname \
	modules/modules \
	network/domain \
	network/networking \
	network/ip \
	network/netmask \
	network/dns \
	network/gateway \
	network/broadcast
	do
	#update only staff wich wasn't overwritten
	if [ "${DB_NETWORK[${i}]}" != "*NULL*" ]
	then
	#create directory if not exist
	if [ ! -d $(dirname ${SETTINGSPATH}/${x}) ]
	then
	install -d $(dirname ${SETTINGSPATH}/${x})
	fi
	echo "${DB_NETWORK[${i}]}" > ${SETTINGSPATH}/${x}
	# theses fucking config functions:
	# network gets only updated,
	# if ${SETTINGS_TEMPLATE}/menu/network/networking exist
	# so we force an update here
	if [ ! -f ${SETTINGSPATH}/network/networking ]
	then
	[ ! -d ${SETTINGSPATH}/network ] && install -d ${SETTINGSPATH}/network
	echo "${FIX_ME}" > ${SETTINGSPATH}/network/networking
	fi
	#set update flag
	ALX_NETWORK_SETUP=true
	fi
	((i++))
	done
	}
58
59		# get the modules settings
60		# ! is the first thing that must be configured !
61		config_modules
62
63		# imports network settings from db
64		config_networking
65
66	validate_xserver(){	# imports x11 settings from db
67	#source /opt/alx-config/Configurator/config_functions.sh	config_x11
	local x i all LOCAL_XSERVER DB_XSERVER SETTINGSPATH
	#all arrays:
	# ->  xmodule resolution depth mouse monvendor monmodel hsync vref
	#xserver
	#get settings from local system
	#vga
	SETTINGSPATH=${SETTINGS_TEMPLATE}/system
	declare -i i=0
	for x in vga/vga \
	vga/vgares \
	vga/vgadepth
	do
	if [ -f ${SETTINGSPATH}/${x} ]
	then
	#file exist, then use content
	LOCAL_XSERVER[${i}]="$(< ${SETTINGSPATH}/${x})"
	else
	LOCAL_XSERVER[${i}]=""
	fi
	((i++))
	done
	#mouse
	if [ -f ${SETTINGSPATH}/mouse/mouse ]
	then
	#file exist, then use content
	LOCAL_XSERVER[3]="$(< ${SETTINGSPATH}/mouse/mouse)"
	else
	LOCAL_XSERVER[3]=""
	fi
	#monitor
	local myvendor mymodel hsync vref
	if [ -f ${SETTINGSPATH}/monitor/monitor ]
	then
	source ${SETTINGSPATH}/monitor/monitor
	declare -i i=4
	for x in "${myvendor}" \
	"${mymodel}" \
	"${hsync}" \
	"${vref}"
	do
	LOCAL_XSERVER[${i}]="${x}"
	((i++))
	done
	else
	LOCAL_XSERVER[4]=""
	LOCAL_XSERVER[5]=""
	LOCAL_XSERVER[6]=""
	LOCAL_XSERVER[7]=""
	fi
	#get settings from database
	all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select module,
	resolution,
	depth
	from cfg_graphic where serial='${ALX_SERIAL}'")
	#split'em up and put in an array
	declare -i i=0
	for x in ${all}
	do
	DB_XSERVER[${i}]=${x}
	((i++))
	done
	# read mouse
	DB_XSERVER[3]=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select mouse from cfg_input where serial='${ALX_SERIAL}'")
	#monitors
	# all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select vendor,
	# model,
	# hsync,
	# vrefresh
	# from cfg_monitor where serial='${ALX_SERIAL}'")
	all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select vendor,
	model,
	hsync,
	vrefresh
	from list_monitors
	inner join cfg_graphic
	on cfg_graphic.monitorid=list_monitors.id;")
	#split'em up and put in an array
	declare -i i=4
	for x in ${all}
	do
	DB_XSERVER[${i}]=${x}
	((i++))
	done
	# #now compare this stuff if they are equal
	# for ((i=0; i < 8; i++))
	# do
	# if [ "${DB_XSERVER[${i}]}" = "${LOCAL_XSERVER[${i}]}" ]
	# then
	# echo "${i}: ${DB_XSERVER[${i}]} == ${LOCAL_XSERVER[${i}]}"
	#
	# #delete equal stuff from DB_NETWORK
	# DB_XSERVER[${i}]="*NULL*"
	#
	# else
	# echo "${i}: ${DB_XSERVER[${i}]} != ${LOCAL_XSERVER[${i}]}"
	# fi
	# done
	#
	#
	# #update configs
	# SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	# #xserver general
	# declare -i i=0
	# for x in vga/vga \
	# vga/vgares \
	# vga/vgadepth \
	# mouse/mouse
	# do
	# #update only staff wich wasn't overwritten
	# if [ "${DB_XSERVER[${i}]}" != "*NULL*" ]
	# then
	# #create directory if not exist
	# if [ ! -d $(dirname ${SETTINGSPATH}/${x}) ]
	# then
	# install -d $(dirname ${SETTINGSPATH}/${x})
	# fi
	# echo "${DB_XSERVER[${i}]}" > ${SETTINGSPATH}/${x}
	# #set update flag
	# ALX_XSERVER_SETUP=true
	# fi
	# ((i++))
	# done
	#
	# #xserver monitors
	# if [ "${DB_XSERVER[4]}" != "*NULL*" \
	# -o "${DB_XSERVER[5]}" != "*NULL*" \
	# -o "${DB_XSERVER[6]}" != "*NULL*" \
	# -o "${DB_XSERVER[7]}" != "*NULL*" ]
	# then
	# if [ ! -d ${SETTINGSPATH}/monitor ]
	# then
	# install -d ${SETTINGSPATH}/monitor
	# fi
	# echo "myvendor=\"${DB_XSERVER[4]}\"" > ${SETTINGSPATH}/monitor/monitor
	# echo "mymodel=\"${DB_XSERVER[5]}\"" >> ${SETTINGSPATH}/monitor/monitor
	# echo "hsync=\"${DB_XSERVER[6]}\"" >> ${SETTINGSPATH}/monitor/monitor
	# echo "vref=\"${DB_XSERVER[7]}\"" >> ${SETTINGSPATH}/monitor/monitor
	#
	# #set update flag
	# ALX_XSERVER_SETUP=true
	# fi
	# - damn fucking setup_xfree routine need to rewrite this fucking stuff -
	# setup_xfree will only run
	# if ${SETTINGS_TEMPLATE}/menu/vga/vga exist
	# so we must *always* update *all* settings if something has changed
	#now compare this stuff if they are equal
	for ((i=0; i < 8; i++))
	do
	if [ "${DB_XSERVER[${i}]}" = "${LOCAL_XSERVER[${i}]}" ]
	then
	echo "${i}: ${DB_XSERVER[${i}]} == ${LOCAL_XSERVER[${i}]}"
	#delete equal stuff from DB_NETWORK
	#DB_XSERVER[${i}]="*NULL*"
	else
	echo "${i}: ${DB_XSERVER[${i}]} != ${LOCAL_XSERVER[${i}]}"
	fi
	done
68
69	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu	# imports session settings from db
70	if [ "${DB_XSERVER[0]}" != "*NULL*" \	config_sessions
	-o "${DB_XSERVER[1]}" != "*NULL*" \
	-o "${DB_XSERVER[2]}" != "*NULL*" \
	-o "${DB_XSERVER[3]}" != "*NULL*" \
	-o "${DB_XSERVER[4]}" != "*NULL*" \
	-o "${DB_XSERVER[5]}" != "*NULL*" \
	-o "${DB_XSERVER[6]}" != "*NULL*" \
	-o "${DB_XSERVER[7]}" != "*NULL*" ]
	then
	[ ! -d ${SETTINGSPATH}/vga ] && install -d ${SETTINGSPATH}/vga
	[ ! -d ${SETTINGSPATH}/mouse ] && install -d ${SETTINGSPATH}/mouse
	[ ! -d ${SETTINGSPATH}/monitor ] && install -d ${SETTINGSPATH}/monitor
	echo "${DB_XSERVER[0]}" > ${SETTINGSPATH}/vga/vga
	echo "${DB_XSERVER[1]}" > ${SETTINGSPATH}/vga/vgares
	echo "${DB_XSERVER[2]}" > ${SETTINGSPATH}/vga/vgadepth
	echo "${DB_XSERVER[3]}" > ${SETTINGSPATH}/mouse/mouse
	echo "myvendor=\"${DB_XSERVER[4]}\"" > ${SETTINGSPATH}/monitor/monitor
	echo "mymodel=\"${DB_XSERVER[5]}\"" >> ${SETTINGSPATH}/monitor/monitor
	echo "hsync=\"${DB_XSERVER[6]}\"" >> ${SETTINGSPATH}/monitor/monitor
	echo "vref=\"${DB_XSERVER[7]}\"" >> ${SETTINGSPATH}/monitor/monitor
	#set update flag
	ALX_XSERVER_SETUP=true
	fi
	}
71
72		# imports printer settings from db
73		config_printing
74
75	validate_sessions(){	# imports auth settings from db
76	#source /opt/alx-config/Configurator/config_functions.sh	config_auth
77
78	local x i all LOCAL_SESSIONS DB_SESSIONS SETTINGSPATH count	# exchange ssh rsa keys
79		HOME=/root config_ssh_auth
	#all arrays:
	# ->  session1 session2 ... sessionN
	#no LOCAL_SESSIONS here, needs bubblesort
	#get settings from database
	all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select session from cfg_sessions where serial='${ALX_SERIAL}'")
	#split'em up and put in an array (only if $all not zero)
	declare -i i=0
	if [ -n "${all}" ]
	then
	for x in ${all}
	do
	DB_SESSIONS[${i}]=${x}
	((i++))
	done
	count=${i}
	else
	count=0
	fi
	## no compare here, can only done with bubblesort or s.th like that
	# shows only the new sessions
	declare -i i=0
	#count=${#DB_SESSIONS[*]} #---> not working gets always 1, why ?
	echo "Number of new sessions: ${count}"
	for ((i=0; i < count; i++))
	do
	echo "${i} - ${DB_SESSIONS[${i}]}"
	done
	#update local configs
	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	declare -i i=0
	#count=${#DB_SESSIONS[*]}
	if [ ${count} -gt 0 ]
	then
	#create directory if not exist
	[ ! -d ${SETTINGSPATH}/sessions ] && install -d ${SETTINGSPATH}/sessions
	#delete old sessions
	echo -n > ${SETTINGSPATH}/sessions/sessions
	for ((i=0; i < count; i++))
	do
	echo "${DB_SESSIONS[${i}]}" >> ${SETTINGSPATH}/sessions/sessions
	done
	#set update flag
	ALX_SESSION_SETUP=true
	fi
	}
	validate_printing(){
	#source /opt/alx-config/Configurator/config_functions.sh
	local x i k all LOCAL_PRINTER DB_PRINTER SETTINGSPATH count
	#all arrays: [2 dimensions !]
	# ->  name1 name2 ... nameN
	# ->  name1 printingport ip share
	#later on, for now -> name1 port1 ip1 share1 name2 ....
	# seperator is 4
	#local PRINTERNAME PRINTING IP SHARE
	# update *always* printers from database;
	# compare with local settings cannot be done yet
	#get settings from database
	all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select printer_name,
	port,
	ip,
	share
	from cfg_printers where serial='${ALX_SERIAL}'")
	#split'em up and put in an array
	declare -i i=0
	declare -i k=0
	if [ -n "${all}" ]
	then
	for x in ${all}
	do
	((k++))
	DB_PRINTER[${i}]="${DB_PRINTER[${i}]} ${x}"
	if [ ${k} -eq 4 ]
	then
	((i++))
	#reset $k
	declare -i k=0
	fi
	done
	count=${i}
	else
	count=0
	fi
	#echo settings
	echo "Number of new printers: ${count}"
	for ((i=0; i < count; i++))
	do
	echo "${i} printer:"
	for x in ${DB_PRINTER[${i}]}
	do
	echo "    ${x}"
	done
	done
	#import settings (only if counter > 0)
	local prnset
	#delete all printers (*always*)
	if [ -d ${SETTINGS_TEMPLATE}/system/printing ]
	then
	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	[ -d ${SETTINGSPATH}/delete ] && rm -rf ${SETTINGSPATH}/delete
	install -d ${SETTINGSPATH}/delete
	mv -f ${SETTINGS_TEMPLATE}/system/printing/* ${SETTINGSPATH}/delete
	rm -rf ${SETTINGS_TEMPLATE}/system/printing
	#set update flag (*always*)
	ALX_PRINTER_SETUP=true
	fi
	if [ ${count} -gt 0 ]
	then
	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	[ ! -d ${SETTINGSPATH}/printing ] && install -d ${SETTINGSPATH}/printing
	for ((i=0; i < count; i++))
	do
	declare -i k=0
	for x in ${DB_PRINTER[${i}]}
	do
	prnset[${k}]=${x}
	((k++))
	done
	echo "PRINTERNAME=${prnset[0]}" >  ${SETTINGSPATH}/printing/${prnset[0]}
	echo "PRINTING=${prnset[1]}" >> ${SETTINGSPATH}/printing/${prnset[0]}
	echo "IP=${prnset[2]}" >> ${SETTINGSPATH}/printing/${prnset[0]}
	echo "SHARE=${prnset[3]}" >> ${SETTINGSPATH}/printing/${prnset[0]}
	done
	#set update flag (*always*)
	ALX_PRINTER_SETUP=true
	fi
	}
	update_system_settings(){
	source /opt/alx-config/Configurator/config_functions.sh
	echo -e ${COLMAGENTA}"Checking system setup ..."${COLDEFAULT}
	echo
	echo "network"
	validate_networking
	echo
	echo "xserver"
	validate_xserver
	echo
	echo "sessions"
	validate_sessions
	echo
	#echo "printers"
	#validate_printing
	#echo
	if [ "${ALX_NETWORK_SETUP}" == "true" ]
	then
	echo -e ${COLMAGENTA}"Updating network settings"${COLDEFAULT}
	setup_modules
	setup_network
	fi
	if [ "${ALX_XSERVER_SETUP}" == "true" ]
	then
	echo -e ${COLMAGENTA}"Updating xserver settings"${COLDEFAULT}
	setup_xfree
	fi
	if [ "${ALX_SESSION_SETUP}" == "true" ]
	then
	echo -e ${COLMAGENTA}"Updating session settings"${COLDEFAULT}
	setup_sessions
	fi
	#if [ "${ALX_PRINTER_SETUP}" == "true" ]
	#then
	# echo -e ${COLMAGENTA}"Updating printer settings"${COLDEFAULT}
	# setup_printers
	#fi
	#clean up temp files
	local SETTINGSPATH
	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	#[ -d ${SETTINGSPATH} ] && rm -rf ${SETTINGSPATH}
80	}	}
81
82	get_system_serial(){	get_system_serial(){
83
84	local CUR_IP CUR_MAC CUR_MTIME	local CUR_IP CUR_MAC CUR_MTIME
85
86	#check if serial file exists	# check if serial file exists
87	if [ -f /etc/alx-config/serial ]	if [ -f /etc/alxconfig-ng/serial ] && [ ! -f /hardware-auto-detection ]
88	then	then
89	source /etc/alx-config/serial	source /etc/alxconfig-ng/serial
90
91	# if system is already configured, it *has* a hostname.	# start preliminary networking (dhcp)
	# so we take the hostname of this system here
	source /etc/hostname
	#start preliminary networking (dhcp)
92	preliminary_network start	preliminary_network start
93
94		# check if mysql server is reachable
95		# if not abort this script
96		if ! reach_mysql_server
97		then
98		preliminary_network stop
99		exit 1
100		fi
101
102	CUR_IP=$(/sbin/ifconfig eth0 | sed -n '/addr:/s/ [^r]*..//gp')	CUR_IP=$(/sbin/ifconfig eth0 | sed -n '/addr:/s/ [^r]*..//gp')
103	CUR_MAC=$(/sbin/ifconfig eth0 | grep HWaddr | cut -d ' ' -f11)	CUR_MAC=$(/sbin/ifconfig eth0 | grep HWaddr | cut -d ' ' -f11)
104	CUR_MTIME=$(date +%s)	CUR_MTIME=$(date +%s)
105
106	echo -e ${COLOREDSTAR} "Trying to validate my serial ..."	echo -e ${COLOREDSTAR} "Trying to validate my serial ..."
107
108	#nice serial output	# nice serial output
109	$CURS_UP	$CURS_UP
110	$SET_WCOL	$SET_WCOL
111	echo "[ SN: ${ALX_SERIAL} ]"	echo "[ SN: ${ALX_SERIAL} ]"
	# #is this system outdated ?
	# #MY_HOSTNAME=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# # "select hostname from cfg_serial where id='${ALX_SERIAL}'")
	#
	# #we do this now with the date instead of the hostname
	# local MY_ALX_REG_DATE
	# MY_ALX_REG_DATE=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select mtime from client_serial where serial='${ALX_SERIAL}'")
	#
	# #if [ "${MY_HOSTNAME}" == "${HOSTNAME}" ]
	# if [ "${MY_ALX_REG_DATE}" == "${ALX_REG_DATE}" ]
	# then
	# #set ALX_STATE to ok so everybody that everything was ok
	# ALX_STATE=ok
	#
	# evaluate_retval
	# else
	# #print false (works only if this is the first statement here)
	# evaluate_retval
	#
	# #set ALX_STATE to error so everybody sees there was an error
	# ALX_STATE=error
	# fi
112
113	if validate_serial "${ALX_SERIAL}" "${ALX_REG_DATE}" "${CUR_MAC}"	if validate_serial "${ALX_SERIAL}" "${ALX_REG_DATE}" "${CUR_MAC}"
114	then	then
115	ALX_STATE="ok"	ALX_STATE="ok"
116	else	else
117		# abort on non valid serial
118	ALX_STATE="invalid serial"	ALX_STATE="invalid serial"
119		echo "ALX_STATE=${ALX_STATE}" > /etc/alxconfig-ng/state/state
120		show_invalid_serial_msg
121		exit 1
122	fi	fi
123
124	else	else
125	#run hardware detection	# run hardware detection
126	echo	echo
127	echo -e ${COLMAGENTA}"Preparing system for first boot"${COLDEFAULT}	if [ -f /hardware-auto-detection ]
128		then
129		echo -e ${COLMAGENTA}"Hardware autodetection forced by system-administrator"${COLDEFAULT}
130		else
131		echo -e ${COLMAGENTA}"Preparing system for first boot"${COLDEFAULT}
132		fi
133	ALX_HW_DETECT=true	ALX_HW_DETECT=true
134	/etc/init.d/hwdetect start	/etc/init.d/hwdetect start
135
136	#set hostname to alx_default_hostname	# set hostname to alx_default_hostname
137		# use old hostname if this is a forced re-check
138		[ -f /hardware-auto-detection ] && ALX_DEFAULT_HOSTNAME="$(< /etc/hostname)"
139	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx
140	HOSTNAME="${ALX_DEFAULT_HOSTNAME}"	HOSTNAME="${ALX_DEFAULT_HOSTNAME}"
141
142	#update the hostname on the system for sure	# update the hostname on the system for sure
143	echo "HOSTNAME=${HOSTNAME}" > /etc/hostname	echo "${HOSTNAME}" > /etc/hostname
144
145	#start preliminary networking (dhcp)	# start preliminary networking (dhcp)
146	preliminary_network start	preliminary_network start
147
148		# check if mysql server is reachable
149		# if not abort this script
150		if ! reach_mysql_server
151		then
152		preliminary_network stop
153		exit 1
154		fi
155
156	CUR_IP=$(/sbin/ifconfig eth0 | sed -n '/addr:/s/ [^r]*..//gp')	CUR_IP=$(/sbin/ifconfig eth0 | sed -n '/addr:/s/ [^r]*..//gp')
157	CUR_MAC=$(/sbin/ifconfig eth0 | grep HWaddr | cut -d ' ' -f11)	CUR_MAC=$(/sbin/ifconfig eth0 | grep HWaddr | cut -d ' ' -f11)
158	CUR_MTIME=$(date +%s)	CUR_MTIME=$(date +%s)
159
160		# abort now if this is a forced re-check
161		if [ -f /hardware-auto-detection ]
162		then
163		# but first check the serial
164		source /etc/alxconfig-ng/serial
165
166		echo -e ${COLOREDSTAR} "Trying to validate my serial ..."
167
168		# nice serial output
169		$CURS_UP
170		$SET_WCOL
171		echo "[ SN: ${ALX_SERIAL} ]"
172
173		if validate_serial "${ALX_SERIAL}" "${ALX_REG_DATE}" "${CUR_MAC}"
174		then
175		ALX_STATE="ok"
176		else
177		# abort on non valid serial
178		ALX_STATE="invalid serial"
179		echo "ALX_STATE=${ALX_STATE}" > /etc/alxconfig-ng/state/state
180		show_invalid_serial_msg
181		exit 1
182		fi
183
184		# write current state to temp file
185		echo "ALX_STATE=${ALX_STATE}" > /etc/alxconfig-ng/state/state
186		rm /hardware-auto-detection
187
188		# now export ALX_FORCED_RECHECK=true
189		# that the setting will be updated not inserted !
190		export ALX_FORCED_RECHECK=true
191		return 0
192		fi
193
194	echo -e ${COLOREDSTAR} "Trying to get new serial ..."	echo -e ${COLOREDSTAR} "Trying to get new serial ..."
195
196	#request new serial	# request new serial
197	#ALX_REG_DATE="$(date +%F)"	# ALX_REG_DATE="$(date +%F)"
198
199	#we're using the mtime now (better for vaildating the serial)	# we're using the mtime now (better for vaildating the serial)
200	mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \	mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
201	"insert into client_serials(	"insert into client_serials(
202	mtime,	mtime,
#	Line 867  get_system_serial(){	Line 206  get_system_serial(){
206	'${CUR_MTIME}',	'${CUR_MTIME}',
207	'${CUR_MAC}'	'${CUR_MAC}'
208	);"	);"
209
210	#then validate and retrieve serial	# then validate and retrieve serial
211
212	### warning must be changed that only the LAST ID will be fetched,  ###	### warning must be changed that only the LAST ID will be fetched,  ###
213	### or you get error if the computer name and date are the same     ###	### or you get error if the computer name and date are the same     ###
214	### you have more then one serial number than                       ###	### you have more than one serial number then                       ###
215
216	#not 100% working may get more than *one* id	# select highest id only (added max)
	#ALX_SERIAL=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select id from cfg_serial where datum='${ALX_REG_DATE}' and hostname='${HOSTNAME}'")
	#select highest id only (added max)
217	ALX_SERIAL=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \	ALX_SERIAL=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
218	"select max(serial) from client_serials where mtime='${CUR_MTIME}' and mac='${CUR_MAC}'")	"select max(serial) from client_serials where mtime='${CUR_MTIME}' and mac='${CUR_MAC}'")
219
220	if [ "${ALX_SERIAL}" != NULL ]	if [ "${ALX_SERIAL}" != NULL ]
221	then	then
222	#nice serial output	# nice serial output
223	$CURS_UP	$CURS_UP
224	$SET_WCOL	$SET_WCOL
225	echo "[ SN: ${ALX_SERIAL} ]"	echo "[ SN: ${ALX_SERIAL} ]"
226
227	#set ALX_STATE to ok so everybody that everything was ok	# set ALX_STATE to ok so everybody that everything was ok
228	ALX_STATE=ok	ALX_STATE=ok
229
230	echo "ALX_SERIAL=${ALX_SERIAL}" > /etc/alx-config/serial	echo "ALX_SERIAL=${ALX_SERIAL}" > /etc/alxconfig-ng/serial
231	echo "ALX_REG_DATE=${CUR_MTIME}" >> /etc/alx-config/serial	echo "ALX_REG_DATE=${CUR_MTIME}" >> /etc/alxconfig-ng/serial
232
233	evaluate_retval	evaluate_retval
234	else	else
235	#print false (works only if this is the first statement here)	# print false (works only if this is the first statement here)
236	evaluate_retval	evaluate_retval
237
238	#set ALX_STATE to error so everybody sees there was an error	# set ALX_STATE to error so everybody sees there was an error
239	ALX_STATE=error	ALX_STATE=error
240
241	#show an error that no new serial was found	# show an error that no new serial was found
242	#nice serial output	# nice serial output
243	$CURS_UP	$CURS_UP
244	$SET_WCOL	$SET_WCOL
245	echo -e "[ SN: ${COLRED}None, 0${COLDEFAULT} ]"	echo -e "[ SN: ${COLRED}None, 0${COLDEFAULT} ]"
246	fi	fi
247	fi	fi
248
249	#write current state to temp file	# write current state to temp file
250	echo "ALX_STATE=${ALX_STATE}" > /etc/alx-config/state/state	echo "ALX_STATE=${ALX_STATE}" > /etc/alxconfig-ng/state/state
251	}	}
252
253
254	check_is_configured() {	check_is_configured() {
255	if [ -f /etc/alx-config/state/configured ]	if [ -f /etc/alxconfig-ng/state/configured ]
256	then	then
257	export ALX_CONFIGURED=true	export ALX_CONFIGURED=true
258	else	else
#	Line 928  check_is_configured() {	Line 263  check_is_configured() {
263
264	# imports current settings to the database resolved by the hardware detection	# imports current settings to the database resolved by the hardware detection
265	import_settings_to_db() {	import_settings_to_db() {
266	#note: networking is always 'dhcp' if hw was autodetected	# note: networking is always 'dhcp' if hw was autodetected
267	#note: default_domain/hostname is set in config.rc	# note: default_domain/hostname is set in config.rc
268
269	#to be safe, we do some sanity checks	# to be safe, we do some sanity checks
270	[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain	[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain
271	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx
272
273	#vars used by hwdetect	# vars used by hwdetect
274	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
275	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
276	local MOUSETYPE XMOUSETYPE FULLNAME DEVICE	local MOUSETYPE XMOUSETYPE FULLNAME DEVICE
277
278	#get setting from hwdetect	# get setting from hwdetect
279	source /etc/sysconfig/hwsetup/knoppix	source /etc/sysconfig/hwsetup/knoppix
280	source /etc/sysconfig/hwsetup/mouse	source /etc/sysconfig/hwsetup/mouse
281
282	echo	echo
283	echo -e ${COLMAGENTA}"Importing detected settings to database"${COLDEFAULT}	echo -e ${COLMAGENTA}"Importing detected settings to database"${COLDEFAULT}
284
285	#network	# network
286	echo -e "      Network settings ..."	echo -e "      Network settings ..."
287	mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \	mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
288	"insert into cfg_network(	"insert into cfg_network(
#	Line 965  import_settings_to_db() {	Line 300  import_settings_to_db() {
300	'dhcp'	'dhcp'
301	);"	);"
302	evaluate_retval	evaluate_retval
303
304	#xserver	# xserver
305	echo -e "      Graphic settings ..."	echo -e "      Graphic settings ..."
306	#xserver general	# xserver general
307	( mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \	( mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
308	"insert into cfg_graphic(	"insert into cfg_graphic(
309	serial,	serial,
310	module,	module,
311	resolution,	resolution,
312	depth	depth,
313		monitorid
314	)	)
315	values(	values(
316	'${ALX_SERIAL}',	'${ALX_SERIAL}',
317	'${XMODULE}',	'${XMODULE}',
318	'1024x768',	'1024x768',
319	'16'	'16',
320	);";	'0'
321	#xserver monitor	);"; )
322	mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \	evaluate_retval
323	"insert into cfg_monitor(
324		# input
325		echo -e "      Input settings ..."
326		mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
327		"insert into cfg_input(serial,mouse) values('${ALX_SERIAL}','${XMOUSETYPE}');"
328		evaluate_retval
329
330		# auth
331		echo -e "      Authentifcation settings ..."
332		mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
333		"insert into client_auth(
334	serial,	serial,
335	vendor,	username,
336	model,	shell,
337	hsync,	vnc,
338	vrefresh	samba,
339		station
340	)	)
341	values(	values(
342	'${ALX_SERIAL}',	'${ALX_SERIAL}',
343	'Aamazing',	'${ALX_UNPRIV_USER}',
344	'CM-1528-FS',	'',
345	'28-64',	'',
346	'47-104'	'',
347	);";	''
348		);"
349		evaluate_retval
350
351		# exchange ssh rsa keys - the first boot needs this !
352		# or no reboot will work via the webadmin
353		echo -e "      SSH authentifcation settings ..."
354		HOME=/root config_ssh_auth
355		evaluate_retval
356
357	# input	# input
358	mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \	echo -e "      Autostart settings ..."
359	"insert into cfg_input(serial,mouse) values('${ALX_SERIAL}','${XMOUSETYPE}');";)	mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
360		"insert into cfg_autostart(serial,session) values('${ALX_SERIAL}','');"
361	evaluate_retval	evaluate_retval
362	}	}
363
364	# imports current settings to the local system resolved by the hardware detection	# imports current settings to the database resolved by the hardware detection
365	import_settings_local(){	update_settings_in_db() {
366	#note: networking is always 'dhcp' if hw was autodetected	# note: networking is always 'dhcp' if hw was autodetected
367	#note: default_domain/hostname is set in config.rc	# note: default_domain/hostname is set in config.rc or exported
368		# note: we updating only hardware settings here !
369	#to be safe, we do some sanity checks
370		# to be safe, we do some sanity checks
371	[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain	[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain
372	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx
373
374	#vars used by hwdetect	# vars used by hwdetect
375	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
376	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
377	local MOUSETYPE XMOUSETYPE FULLNAME DEVICE	local MOUSETYPE XMOUSETYPE FULLNAME DEVICE
378
379		# get setting from hwdetect
	#get setting from hwdetect
380	source /etc/sysconfig/hwsetup/knoppix	source /etc/sysconfig/hwsetup/knoppix
381	source /etc/sysconfig/hwsetup/mouse	source /etc/sysconfig/hwsetup/mouse
382
383	echo	echo
384	echo -e ${COLMAGENTA}"Importing detected settings to local system"${COLDEFAULT}	echo -e ${COLMAGENTA}"Updating detected settings in database"${COLDEFAULT}
385
386		# network
	#allready configured, no update needed so we put it to system
	SETTINGSPATH=${SETTINGS_TEMPLATE}/system
	#network
387	echo -e "      Network settings ..."	echo -e "      Network settings ..."
388
389	[ ! -d ${SETTINGSPATH}/modules ] && install -d ${SETTINGSPATH}/modules	mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
390	echo "${NETCARD_DRIVER}" > ${SETTINGSPATH}/modules/modules	"update cfg_network set
391		hostname='${ALX_DEFAULT_HOSTNAME}',
392	[ ! -d ${SETTINGSPATH}/network ] && install -d ${SETTINGSPATH}/network	module='${NETCARD_DRIVER}',
393	( echo "${ALX_DEFAULT_HOSTNAME}" > ${SETTINGSPATH}/network/hostname;	domain='${ALX_DEFAULT_DOMAIN}',
394	echo "${ALX_DEFAULT_DOMAIN}" > ${SETTINGSPATH}/network/domain;	networking='dhcp'
395	echo "dhcp" > ${SETTINGSPATH}/network/networking )	where serial=${ALX_SERIAL};"
396	evaluate_retval	evaluate_retval
397
398		# xserver
	#xserver
399	echo -e "      Graphic settings ..."	echo -e "      Graphic settings ..."
400		# xserver general
401	[ ! -d ${SETTINGSPATH}/vga ] && install -d ${SETTINGSPATH}/vga	mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
402	[ ! -d ${SETTINGSPATH}/mouse ] && install -d ${SETTINGSPATH}/mouse	"update cfg_graphic set
403	[ ! -d ${SETTINGSPATH}/monitor ] && install -d ${SETTINGSPATH}/monitor	module='${XMODULE}',
404	( echo "${XMODULE}" > ${SETTINGSPATH}/vga/vga;	resolution='1024x768',
405	echo "16" > ${SETTINGSPATH}/vga/vgadepth;	depth='16',
406	echo "1024x768" > ${SETTINGSPATH}/vga/vgares;	monitorid='0'
407	echo "${XMOUSETYPE}" > ${SETTINGSPATH}/mouse/mouse;	where serial=${ALX_SERIAL};"
	echo "myvendor=\"Aamazing\"" > ${SETTINGSPATH}/monitor/monitor;
	echo "mymodel=\"CM-1528-FS\"" >> ${SETTINGSPATH}/monitor/monitor;
	echo "hsync=\"28-64\"" >> ${SETTINGSPATH}/monitor/monitor;
	echo "vref=\"47-104\"" >> ${SETTINGSPATH}/monitor/monitor;)
408	evaluate_retval	evaluate_retval
409
410	#set system state to 'already configured'	# input
411	touch /etc/alx-config/state/configured	echo -e "      Input settings ..."
412		mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
413		"update cfg_input set
414		mouse='${XMOUSETYPE}'
415		where serial=${ALX_SERIAL};"
416		evaluate_retval
417		}
418
419		# imports current settings to the local system resolved by the hardware detection
420		# we only need the network settings
421		import_settings_local(){
422		# note: networking is always 'dhcp' if hw was autodetected
423		# note: default_domain/hostname is set in config.rc
424
425		# to be safe, we do some sanity checks
426		[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain
427		[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx
428
429		# vars used by hwdetect
430		local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
431		local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
432		local MOUSETYPE XMOUSETYPE FULLNAME DEVICE
433
434		# get setting from hwdetect
435		source /etc/sysconfig/hwsetup/knoppix
436
437		echo
438		echo -e ${COLMAGENTA}"Importing detected settings to local system"${COLDEFAULT}
439
440		[ ! -d ${SETTINGSPATH} ] && install -d ${SETTINGSPATH}
441		echo "${NETCARD_DRIVER}" > ${SETTINGSPATH}/modules
442		evaluate_retval
443
444		# set system state to 'already configured'
445		touch /etc/alxconfig-ng/state/configured
446
447		# create a fresh fluxbox directory
448		[ -d ${ALX_UNPRIV_HOME}/.fluxbox ] && rm -rf ${ALX_UNPRIV_HOME}/.fluxbox
449		install -d ${ALX_UNPRIV_HOME}/.fluxbox
450
451		# now generate fluxbox config files
452
453		# fluxbox main config
454		cat ${ALX_SKELETONS}/fluxbox/init \
455		> ${ALX_UNPRIV_HOME}/.fluxbox/init
456
457		# fluxbox menu header
458		cat ${ALX_SKELETONS}/fluxbox/menu.header \
459		> ${ALX_UNPRIV_HOME}/.fluxbox/menu
460
461		# now fix it with proper messages :P
462		local ver="$(< /etc/mageversion)"
463		sed -i "s:@CHANGEME@:alx-${ver}  #${ALX_SERIAL}:g" \
464		${ALX_UNPRIV_HOME}/.fluxbox/menu
465
466		# add a newline (maybe there is no crlf in the header)
467		echo >> ${ALX_UNPRIV_HOME}/.fluxbox/menu
468
469		# fluxbox menu footer
470		cat ${ALX_SKELETONS}/fluxbox/menu.footer \
471		>> ${ALX_UNPRIV_HOME}/.fluxbox/menu
472
473		# add a newline (maybe there is no crlf in the footer)
474		echo >> ${ALX_UNPRIV_HOME}/.fluxbox/menu
475
476		# set correct permissions
477		chown ${ALX_UNPRIV_USER}:${ALX_UNPRIV_GROUP} ${ALX_UNPRIV_HOME}
478		chown ${ALX_UNPRIV_USER}:${ALX_UNPRIV_GROUP} ${ALX_UNPRIV_HOME}/.fluxbox
479		chmod 0755 ${ALX_UNPRIV_HOME}/.fluxbox
480
481		# default passwords are bad
482		#usermod -p $(perl -e "printf(crypt('foobar','AD'))") root
483		#usermod -p $(perl -e "printf(crypt('foobar','AD'))") ${ALX_UNPRIV_USER}
484		#smbpasswd -a root foobar
485	}	}
486
487	#start|stop	# start|stop
488	preliminary_network(){	preliminary_network(){
489	local module	local module
490
491	if [ -f /etc/alx-config/state/configured ]	if [ -f /etc/alxconfig-ng/state/configured ]
492	then	then
493	#get module name	# get module name
494	module=$(cat ${SETTINGS_TEMPLATE}/system/modules/modules)	module=$(cat ${SETTINGSPATH}/modules)
495	modprobe ${module}	modprobe ${module}
496	else	else
497	#vars used by hwdetect	# vars used by hwdetect
498	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
499	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
500
501	#get setting from hwdetect	# get setting from hwdetect
502	source /etc/sysconfig/hwsetup/knoppix	source /etc/sysconfig/hwsetup/knoppix
503	modprobe ${NETCARD_DRIVER}	modprobe ${NETCARD_DRIVER}
504	fi	fi
505
506	case $1 in	case $1 in
507	start)	start)
508	# keeping like always safe:	# keeping like always safe:
#	Line 1097  preliminary_network(){	Line 516  preliminary_network(){
516	else	else
517	rm -f /var/run/dhcpcd-eth?.pid	rm -f /var/run/dhcpcd-eth?.pid
518	fi	fi
519
520	echo -e ${COLMAGENTA}"Starting preliminary network ... "${COLDEFAULT}	echo -e ${COLMAGENTA}"Starting preliminary network ... "${COLDEFAULT}
521	#dhcpcd &> /dev/null #&& echo "ok" || echo "false"	# -t 10 timeout of 10 secs
522		dhcpcd -t 10 &> /dev/null
523
524	# aka_fix ########################################	# aka_fix ########################################
525	ifconfig eth0 128.20.222.222 netmask 255.255.0.0 up	#ifconfig eth0 128.20.222.222 netmask 255.255.0.0 up
526	route del default gw 128.20.50.13 &> /dev/null	#route del default gw 128.20.50.13 &> /dev/null
527	route add default gw 128.20.50.21 &> /dev/null	#route add default gw 128.20.50.21 &> /dev/null
528	echo "nameserver 128.20.50.21" > /etc/resolv.conf	#echo "nameserver 128.20.50.21" > /etc/resolv.conf
529	##################################################	##################################################
530
531	evaluate_retval	evaluate_retval
532	;;	;;
533
534	stop)	stop)
535	echo -e ${COLMAGENTA}"Stopping preliminary network ... "${COLDEFAULT}	echo -e ${COLMAGENTA}"Stopping preliminary network ... "${COLDEFAULT}
536	ifconfig eth0 down	ifconfig eth0 down
537	if ps -A|grep dhcpcd > /dev/null	if ps -A|grep dhcpcd > /dev/null
538	then	then
	#echo -en ${COLMAGENTA}"Stopping preliminary network ... "${COLDEFAULT}
539	dhcpcd -z  &> /dev/null	dhcpcd -z  &> /dev/null
540	fi	fi
541	evaluate_retval	evaluate_retval
542	;;	;;
543
544	*)	*)
545	echo "Usage: preliminary_network {start|stop}"	echo "Usage: preliminary_network {start|stop}"
546	;;	;;
#	Line 1127  preliminary_network(){	Line 549  preliminary_network(){
549
550	case $1 in	case $1 in
551	start)	start)
552	#retrieve or validate current serial	# retrieve or validate current serial
553	get_system_serial	get_system_serial
554	if [ "${ALX_HW_DETECT}" == "true" ]	if [[ ${ALX_HW_DETECT} = true ]]
555	then	then
556	import_settings_to_db	if [[ ${ALX_FORCED_RECHECK} = true ]]
557		then
558		update_settings_in_db
559		else
560		import_settings_to_db
561		fi
562	import_settings_local	import_settings_local
563
564		# here we should also exchange the ssh keys
565		# or the system cannot be rebooted after
566		# the first start via the alx-webadmin
567		config_ssh_auth
568	fi	fi
569
570	#now setup system configuration	# now setup system configuration
571	#alx_setup_or_whatever_it_will_be_called()	# alx_setup_or_whatever_it_will_be_called()
572	[ "${ALX_HW_DETECT}" == "false" ] && update_system_settings	[ "${ALX_HW_DETECT}" == "false" ] && update_system_settings
573
574	#stop at last the preliminary networking (dhcp)	# stop at last the preliminary networking (dhcp)
575	preliminary_network stop	preliminary_network stop
576	;;	;;
577
578	stop)	stop)
579	#unset_alx_connected #--> now in alxsetstate-rc6	# unset_alx_connected #--> now in alxsetstate-rc6
580	# ! important !: del systemstate	# ! important !: del systemstate
581	[ -f /etc/alx-config/state/state ] && rm /etc/alx-config/state/state	[ -f /etc/alxconfig-ng/state/state ] && rm /etc/alxconfig-ng/state/state
582	sleep 0.1	sleep 0.1
583	;;	;;
584	*)	*)
585	echo "Usage: $0 {start|stop} ..."	echo "Usage: $0 {start|stop} ..."
586	;;	;;
587	esac	esac
588

---

Colored Diff Long Colored Diff Full Colored Diff Unidiff Context Diff Side by Side

Legend: Removed from v.221   changed lines   Added in v.307