Diff of /alx-src/branches/alxconf-060/init.d/alxsettings

Parent Directory | Revision Log | Patch

	alx-src/trunk/alxconfig-ng/init.d/alxsettings revision 221 by niro, Tue Mar 8 20:49:14 2005 UTC	alx-src/branches/alxconf-060/init.d/alxsettings revision 2455 by niro, Mon Jun 27 12:47:52 2011 UTC
#	Line 1	Line 1
1	#!/bin/bash	#!/bin/bash
2		# $Id$
3	# <niro@magellan-linux.de>	# <niro@magellan-linux.de>
4
5	#%rlevels: 7:s 0:k 6:k	#%rlevels: 7:s 0:k
6	#%start: 41	#%start: 41
7	#%stop: 01	#%stop: 01
8
#	Line 19	Line 19
19	# if no changes are at server side they will be kept, if yes the get updated.	# if no changes are at server side they will be kept, if yes the get updated.
20	# the server settings has higher priority.	# the server settings has higher priority.
21
22	#                       +-----+	source /etc/conf.d/rc
	#                       |start|
	#                       +-----+
	#                          |
	#                          |
	#              start_preliminary_network
	#                          |
	#                          |       n
	#                  serial_check ------->  get_new_serial
	#                          |                      |
	#                         y|                      |
	#                          |           n          |
	#                check_is_configured ---->  run_hw_detection
	#                          |                      |
	#                         y|                      |
	#            n             |                      |
	#        +--------cfg_equal_to_db          import_settings_to_db
	#        |                 |                      |
	#   update_from_db        y|                      |
	#        |                 |                      |
	#   set_is_configured      |                  set_is_configured
	#        +-----------------|                      |
	#                          +----------------------+
	#                          |
	#                          |
	#               stop_preliminary_network
	#                          |
	#                          |
	#                       +----+
	#                       |done|
	#                       +----+
	#                          |
	#                          |
	#                 normal_system_bootup
	#                          |
	#                          .
	#                          .
	#                          .
	#
	#
	#
	source /etc/sysconfig/rc
23	source $rc_functions	source $rc_functions
24
25	#mysql settings	# mysql settings
26	source /etc/alx-config/config.rc	source /etc/alxconfig-ng/config.rc
	source /opt/alx-config/functions/mysqlfunctions
	source /opt/alx-config/functions/alx-mysql-functions
27
28	#check if mysql is available	# helper functions
29	[ -x /usr/bin/mysql ] && MYSQL_ALX=true	source /usr/lib/alxconfig-ng/functions/common
30		source /usr/lib/alxconfig-ng/functions/mysqlfunctions
31		source /usr/lib/alxconfig-ng/functions/serial_functions
32		source /usr/lib/alxconfig-ng/functions/config_modules
33		source /usr/lib/alxconfig-ng/functions/config_network
34		source /usr/lib/alxconfig-ng/functions/config_printers
35		source /usr/lib/alxconfig-ng/functions/config_sessions
36		source /usr/lib/alxconfig-ng/functions/config_x11
37		source /usr/lib/alxconfig-ng/functions/config_auth
38		source /usr/lib/alxconfig-ng/functions/config_ssh_auth
39		source /usr/lib/alxconfig-ng/functions/config_versions
40
41	#other needed vars	# other needed vars
42	ALX_HW_DETECT=false	ALX_HW_DETECT=false
43	ALX_NETWORK_SETUP=false	ALX_FORCED_RECHECK=false
44	ALX_XSERVER_SETUP=false	ALX_RESET_SETTINGS=false
45	ALX_SESSION_SETUP=false	ALX_CONFD_NETWORKING=false
	ALX_PRINTER_SETUP=false
46
47	#unset vars which may kill us	# unset vars which may kill us
48	unset ALX_SERIAL ALX_STATE	unset ALX_SERIAL ALX_STATE
49
50
51	#setup needed directories	# setup needed directories
52	[ ! -d /etc/alx-config/state ] && install -d /etc/alx-config/state	[ ! -d /etc/alxconfig-ng/state ] && install -d /etc/alxconfig-ng/state
53
54		update_system_settings()
55		{
56		rc_mecho Checking system setup ...
57
58	# still a need to implement this ?	# get the modules settings
59	# #needed to detect usb/livecd boot	# ! is the first thing that must be configured !
60	# if [ -e /.bootdev ]	config_modules
	# then
	# source /.bootdev
	# else
	# echo "Couldn't find /.bootdev. Aborting."
	# exit 1
	# fi
	# still a need to implement this ? --> media-check ?
	settings_import() {
	if [ "${FSTYPE}" == "vfat" ]
	then
	if [ -e /mnt/cdrom/settings/system ]
	then
	echo -e ${COLOREDSTAR}"Importing old alx-settings ..."
	( cp -R /mnt/cdrom/settings/system/* /etc/alx-config/settings/menu &&
	source /etc/alx-config/config.rc &&
	source /opt/alx-config/Configurator/config_functions.sh &&
	setup_xfree > /dev/null 2>&1 &&
	setup_modules > /dev/null 2>&1 &&
	setup_network > /dev/null 2>&1 &&
	#setup_printers > /dev/null 2>&1 &&
	setup_sessions > /dev/null 2>&1 &&
	touch /etc/alx-config/imported )
	evaluate_retval
	fi
	fi
	}
61
62		# imports network settings from db
63		config_networking
64
65	# this thingy needs an complete rewrite.	# imports x11 settings from db
66	# first get all settings from db server,	config_x11
	# than check against local system settings,
	# if there are any differences, update the local settings,
	# as the server has a higher priority.
	# Important: write local settings only if they make sense,
	#            to have a fallback in case the server is down!
	#get_settings_from_server(){
	# #some needed arrays
	# #ARRAY_NETWORK #module domain networking netmask dns gateway
	# #SESSION #
	# #GRAFIK  #
	#
	# echo "Importing now old Settings ..."
	#
	# local serial module domain networking netmask dns gateway i x all
	#
	# declare -i i=0
	#
	# #get hostname from database
	# MY_HOSTNAME=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select hostname from cfg_serial where id='${ALX_SERIAL}'")
	#
	# #get network settings from database
	# all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select module,
	# domain,
	# networking,
	# netmask,
	# dns,
	# gateway,
	# broadcast,
	# ip
	# from cfg_network where serial='${ALX_SERIAL}'")
	# #split'em up and put in array
	# for x in ${all}
	# do
	# ARRAY_NETWORK[${i}]=${x}
	# ((i++))
	# done
	# echo " Network:"
	# echo "   MODULE:     ${ARRAY_NETWORK[0]}"
	# echo "   IP:         ${ARRAY_NETWORK[7]}"
	# echo "   HOSTNAME:   ${MY_HOSTNAME}"
	# echo "   DOMAIN:     ${ARRAY_NETWORK[1]}"
	# echo "   NETWORKING: ${ARRAY_NETWORK[2]}"
	# echo "   NETMASK:    ${ARRAY_NETWORK[3]}"
	# echo "   DNS:        ${ARRAY_NETWORK[4]}"
	# echo "   GATEWAY:    ${ARRAY_NETWORK[5]}"
	# echo "   BROADCAST:  ${ARRAY_NETWORK[6]}"
	# echo
	#
	# #get x settings from database
	# local module resolution
	#
	# #reset i
	# declare -i i=0
	# all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select module,
	# resolution
	# from cfg_grafik where serial='${ALX_SERIAL}'")
	# #split'em up and put in array
	# for x in ${all}
	# do
	# ARRAY_GRAFIK[${i}]=${x}
	# ((i++))
	# done
	#
	# echo " VGA:"
	# echo "   MODULE:     ${ARRAY_GRAFIK[0]}"
	# echo "   RESOLUTION: ${ARRAY_GRAFIK[1]}"
	# echo
	#
	# #get ica-sessions from database
	# ARRAY_SESSIONS=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select session from cfg_session where serial='${ALX_SERIAL}'")
	#
	# echo " SESSIONS:"
	# declare -i i=0
	# for x in ${ARRAY_SESSIONS}
	# do
	# ((i++))
	# echo "   SESSION${i}:   ${x}"
	# done
	# echo
	#
	# #now write these settings
	# local SETTINGSPATH
	#
	# #network
	#
	# #settings must be also set on system, so we put this to menu
	# SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	#
	# [ ! -d ${SETTINGSPATH}/modules ] && install -d ${SETTINGSPATH}/modules
	# echo "${ARRAY_NETWORK[0]}" > ${SETTINGSPATH}/modules/modules
	#
	# [ ! -d ${SETTINGSPATH}/network ] && install -d ${SETTINGSPATH}/network
	# echo "${MY_HOSTNAME}" > ${SETTINGSPATH}/network/hostname
	# echo "${ARRAY_NETWORK[1]}" > ${SETTINGSPATH}/network/domain
	# echo "${ARRAY_NETWORK[2]}" > ${SETTINGSPATH}/network/networking
	# [ -n "${ARRAY_NETWORK[3]}" ] && echo "${ARRAY_NETWORK[3]}" > ${SETTINGSPATH}/network/netmask
	# [ -n "${ARRAY_NETWORK[4]}" ] && echo "${ARRAY_NETWORK[4]}" > ${SETTINGSPATH}/network/dns
	# [ -n "${ARRAY_NETWORK[5]}" ] && echo "${ARRAY_NETWORK[5]}" > ${SETTINGSPATH}/network/gateway
	# [ -n "${ARRAY_NETWORK[6]}" ] && echo "${ARRAY_NETWORK[6]}" > ${SETTINGSPATH}/network/broadcast
	# [ -n "${ARRAY_NETWORK[7]}" ] && echo "${ARRAY_NETWORK[7]}" > ${SETTINGSPATH}/network/ip
67
68		# imports session settings from db
69		config_sessions
70
71	validate_networking(){	# imports printer settings from db
72	#source /opt/alx-config/Configurator/config_functions.sh	config_printing
73
74	local x i all LOCAL_NETWORK DB_NETWORK SETTINGSPATH	# imports auth settings from db
75		config_auth
	#all arrays:
	# ->  hostname modules domain networking ip netmask dns gateway broadcast
76
77	#networking	# exchange ssh rsa keys
78	#get settings from local system	HOME=/root config_ssh_auth
	SETTINGSPATH=${SETTINGS_TEMPLATE}/system
	declare -i i=0
	for x in network/hostname \
	modules/modules \
	network/domain \
	network/networking \
	network/ip \
	network/netmask \
	network/dns \
	network/gateway \
	network/broadcast
	do
	if [ -f ${SETTINGSPATH}/${x} ]
	then
	#file exist, then use content
	LOCAL_NETWORK[${i}]="$(< ${SETTINGSPATH}/${x})"
	else
	LOCAL_NETWORK[${i}]=""
	fi
	((i++))
	done
	#get settings from database
	# DB_NETWORK[0]=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select hostname from cfg_network where serial='${ALX_SERIAL}'")
	all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select hostname,
	module,
	domain,
	networking,
	ip,
	netmask,
	dns,
	gateway,
	broadcast
	from cfg_network where serial='${ALX_SERIAL}'")
	#split'em up and put in an array
	declare -i i=0
	for x in ${all}
	do
	DB_NETWORK[${i}]=${x}
	((i++))
	done
	#needed by the small hotfix
	local FIX_ME
	FIX_ME="${DB_NETWORK[2]}"
	#now compare this stuff if they are equal
	for ((i=0; i < 9; i++))
	do
	if [ "${DB_NETWORK[${i}]}" = "${LOCAL_NETWORK[${i}]}" ]
	then
	echo "${i}: ${DB_NETWORK[${i}]} == ${LOCAL_NETWORK[${i}]}"
	#delete equal stuff from DB_NETWORK
	DB_NETWORK[${i}]="*NULL*"
	else
	echo "${i}: ${DB_NETWORK[${i}]} != ${LOCAL_NETWORK[${i}]}"
	fi
	done
	#update configs
	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	declare -i i=0
	for x in network/hostname \
	modules/modules \
	network/domain \
	network/networking \
	network/ip \
	network/netmask \
	network/dns \
	network/gateway \
	network/broadcast
	do
	#update only staff wich wasn't overwritten
	if [ "${DB_NETWORK[${i}]}" != "*NULL*" ]
	then
	#create directory if not exist
	if [ ! -d $(dirname ${SETTINGSPATH}/${x}) ]
	then
	install -d $(dirname ${SETTINGSPATH}/${x})
	fi
	echo "${DB_NETWORK[${i}]}" > ${SETTINGSPATH}/${x}
	# theses fucking config functions:
	# network gets only updated,
	# if ${SETTINGS_TEMPLATE}/menu/network/networking exist
	# so we force an update here
	if [ ! -f ${SETTINGSPATH}/network/networking ]
	then
	[ ! -d ${SETTINGSPATH}/network ] && install -d ${SETTINGSPATH}/network
	echo "${FIX_ME}" > ${SETTINGSPATH}/network/networking
	fi
79
80	#set update flag	# import version info
81	ALX_NETWORK_SETUP=true	config_version
	fi
	((i++))
	done
82	}	}
83
84		get_system_serial()
85		{
86		local CUR_IP CUR_MAC CUR_MTIME ALX_IFACE
87
88		if [[ ${ALX_CONFD_NETWORKING} = true ]]
	validate_xserver(){
	#source /opt/alx-config/Configurator/config_functions.sh
	local x i all LOCAL_XSERVER DB_XSERVER SETTINGSPATH
	#all arrays:
	# ->  xmodule resolution depth mouse monvendor monmodel hsync vref
	#xserver
	#get settings from local system
	#vga
	SETTINGSPATH=${SETTINGS_TEMPLATE}/system
	declare -i i=0
	for x in vga/vga \
	vga/vgares \
	vga/vgadepth
	do
	if [ -f ${SETTINGSPATH}/${x} ]
	then
	#file exist, then use content
	LOCAL_XSERVER[${i}]="$(< ${SETTINGSPATH}/${x})"
	else
	LOCAL_XSERVER[${i}]=""
	fi
	((i++))
	done
	#mouse
	if [ -f ${SETTINGSPATH}/mouse/mouse ]
89	then	then
90	#file exist, then use content	ALX_IFACE="$(< ${SETTINGSPATH}/confd-networking)"
	LOCAL_XSERVER[3]="$(< ${SETTINGSPATH}/mouse/mouse)"
91	else	else
92	LOCAL_XSERVER[3]=""	ALX_IFACE="eth0"
93	fi	fi
	#monitor
	local myvendor mymodel hsync vref
	if [ -f ${SETTINGSPATH}/monitor/monitor ]
	then
	source ${SETTINGSPATH}/monitor/monitor
	declare -i i=4
	for x in "${myvendor}" \
	"${mymodel}" \
	"${hsync}" \
	"${vref}"
	do
	LOCAL_XSERVER[${i}]="${x}"
	((i++))
	done
	else
	LOCAL_XSERVER[4]=""
	LOCAL_XSERVER[5]=""
	LOCAL_XSERVER[6]=""
	LOCAL_XSERVER[7]=""
	fi
	#get settings from database
	all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select module,
	resolution,
	depth
	from cfg_graphic where serial='${ALX_SERIAL}'")
	#split'em up and put in an array
	declare -i i=0
	for x in ${all}
	do
	DB_XSERVER[${i}]=${x}
	((i++))
	done
	# read mouse
	DB_XSERVER[3]=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select mouse from cfg_input where serial='${ALX_SERIAL}'")
	#monitors
	# all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select vendor,
	# model,
	# hsync,
	# vrefresh
	# from cfg_monitor where serial='${ALX_SERIAL}'")
	all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select vendor,
	model,
	hsync,
	vrefresh
	from list_monitors
	inner join cfg_graphic
	on cfg_graphic.monitorid=list_monitors.id;")
	#split'em up and put in an array
	declare -i i=4
	for x in ${all}
	do
	DB_XSERVER[${i}]=${x}
	((i++))
	done
	# #now compare this stuff if they are equal
	# for ((i=0; i < 8; i++))
	# do
	# if [ "${DB_XSERVER[${i}]}" = "${LOCAL_XSERVER[${i}]}" ]
	# then
	# echo "${i}: ${DB_XSERVER[${i}]} == ${LOCAL_XSERVER[${i}]}"
	#
	# #delete equal stuff from DB_NETWORK
	# DB_XSERVER[${i}]="*NULL*"
	#
	# else
	# echo "${i}: ${DB_XSERVER[${i}]} != ${LOCAL_XSERVER[${i}]}"
	# fi
	# done
	#
	#
	# #update configs
	# SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	# #xserver general
	# declare -i i=0
	# for x in vga/vga \
	# vga/vgares \
	# vga/vgadepth \
	# mouse/mouse
	# do
	# #update only staff wich wasn't overwritten
	# if [ "${DB_XSERVER[${i}]}" != "*NULL*" ]
	# then
	# #create directory if not exist
	# if [ ! -d $(dirname ${SETTINGSPATH}/${x}) ]
	# then
	# install -d $(dirname ${SETTINGSPATH}/${x})
	# fi
	# echo "${DB_XSERVER[${i}]}" > ${SETTINGSPATH}/${x}
	# #set update flag
	# ALX_XSERVER_SETUP=true
	# fi
	# ((i++))
	# done
	#
	# #xserver monitors
	# if [ "${DB_XSERVER[4]}" != "*NULL*" \
	# -o "${DB_XSERVER[5]}" != "*NULL*" \
	# -o "${DB_XSERVER[6]}" != "*NULL*" \
	# -o "${DB_XSERVER[7]}" != "*NULL*" ]
	# then
	# if [ ! -d ${SETTINGSPATH}/monitor ]
	# then
	# install -d ${SETTINGSPATH}/monitor
	# fi
	# echo "myvendor=\"${DB_XSERVER[4]}\"" > ${SETTINGSPATH}/monitor/monitor
	# echo "mymodel=\"${DB_XSERVER[5]}\"" >> ${SETTINGSPATH}/monitor/monitor
	# echo "hsync=\"${DB_XSERVER[6]}\"" >> ${SETTINGSPATH}/monitor/monitor
	# echo "vref=\"${DB_XSERVER[7]}\"" >> ${SETTINGSPATH}/monitor/monitor
	#
	# #set update flag
	# ALX_XSERVER_SETUP=true
	# fi
	# - damn fucking setup_xfree routine need to rewrite this fucking stuff -
	# setup_xfree will only run
	# if ${SETTINGS_TEMPLATE}/menu/vga/vga exist
	# so we must *always* update *all* settings if something has changed
	#now compare this stuff if they are equal
	for ((i=0; i < 8; i++))
	do
	if [ "${DB_XSERVER[${i}]}" = "${LOCAL_XSERVER[${i}]}" ]
	then
	echo "${i}: ${DB_XSERVER[${i}]} == ${LOCAL_XSERVER[${i}]}"
	#delete equal stuff from DB_NETWORK
	#DB_XSERVER[${i}]="*NULL*"
	else
	echo "${i}: ${DB_XSERVER[${i}]} != ${LOCAL_XSERVER[${i}]}"
	fi
	done
94
95	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu	# check if serial file exists
96	if [ "${DB_XSERVER[0]}" != "*NULL*" \	if [ -f /etc/alxconfig-ng/serial ] && [[ ${ALX_FORCED_RECHECK} = false ]]
	-o "${DB_XSERVER[1]}" != "*NULL*" \
	-o "${DB_XSERVER[2]}" != "*NULL*" \
	-o "${DB_XSERVER[3]}" != "*NULL*" \
	-o "${DB_XSERVER[4]}" != "*NULL*" \
	-o "${DB_XSERVER[5]}" != "*NULL*" \
	-o "${DB_XSERVER[6]}" != "*NULL*" \
	-o "${DB_XSERVER[7]}" != "*NULL*" ]
97	then	then
98	[ ! -d ${SETTINGSPATH}/vga ] && install -d ${SETTINGSPATH}/vga	source /etc/alxconfig-ng/serial
	[ ! -d ${SETTINGSPATH}/mouse ] && install -d ${SETTINGSPATH}/mouse
	[ ! -d ${SETTINGSPATH}/monitor ] && install -d ${SETTINGSPATH}/monitor
	echo "${DB_XSERVER[0]}" > ${SETTINGSPATH}/vga/vga
	echo "${DB_XSERVER[1]}" > ${SETTINGSPATH}/vga/vgares
	echo "${DB_XSERVER[2]}" > ${SETTINGSPATH}/vga/vgadepth
	echo "${DB_XSERVER[3]}" > ${SETTINGSPATH}/mouse/mouse
	echo "myvendor=\"${DB_XSERVER[4]}\"" > ${SETTINGSPATH}/monitor/monitor
	echo "mymodel=\"${DB_XSERVER[5]}\"" >> ${SETTINGSPATH}/monitor/monitor
	echo "hsync=\"${DB_XSERVER[6]}\"" >> ${SETTINGSPATH}/monitor/monitor
	echo "vref=\"${DB_XSERVER[7]}\"" >> ${SETTINGSPATH}/monitor/monitor
	#set update flag
	ALX_XSERVER_SETUP=true
	fi
	}
99
100		# start preliminary networking (dhcp)
101		preliminary_network start
102
103	validate_sessions(){	# check if mysql server is reachable
104	#source /opt/alx-config/Configurator/config_functions.sh	# if not abort this script
105		if ! reach_mysql_server
106	local x i all LOCAL_SESSIONS DB_SESSIONS SETTINGSPATH count	then
107		preliminary_network stop
108	#all arrays:	exit 1
109	# ->  session1 session2 ... sessionN	fi
	#no LOCAL_SESSIONS here, needs bubblesort
	#get settings from database
	all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select session from cfg_sessions where serial='${ALX_SERIAL}'")
	#split'em up and put in an array (only if $all not zero)
	declare -i i=0
	if [ -n "${all}" ]
	then
	for x in ${all}
	do
	DB_SESSIONS[${i}]=${x}
	((i++))
	done
	count=${i}
	else
	count=0
	fi
	## no compare here, can only done with bubblesort or s.th like that
	# shows only the new sessions
	declare -i i=0
	#count=${#DB_SESSIONS[*]} #---> not working gets always 1, why ?
	echo "Number of new sessions: ${count}"
	for ((i=0; i < count; i++))
	do
	echo "${i} - ${DB_SESSIONS[${i}]}"
	done
	#update local configs
	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	declare -i i=0
	#count=${#DB_SESSIONS[*]}
	if [ ${count} -gt 0 ]
	then
	#create directory if not exist
	[ ! -d ${SETTINGSPATH}/sessions ] && install -d ${SETTINGSPATH}/sessions
	#delete old sessions
	echo -n > ${SETTINGSPATH}/sessions/sessions
	for ((i=0; i < count; i++))
	do
	echo "${DB_SESSIONS[${i}]}" >> ${SETTINGSPATH}/sessions/sessions
	done
	#set update flag
	ALX_SESSION_SETUP=true
	fi
	}
	validate_printing(){
	#source /opt/alx-config/Configurator/config_functions.sh
	local x i k all LOCAL_PRINTER DB_PRINTER SETTINGSPATH count
	#all arrays: [2 dimensions !]
	# ->  name1 name2 ... nameN
	# ->  name1 printingport ip share
	#later on, for now -> name1 port1 ip1 share1 name2 ....
	# seperator is 4
	#local PRINTERNAME PRINTING IP SHARE
	# update *always* printers from database;
	# compare with local settings cannot be done yet
	#get settings from database
	all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select printer_name,
	port,
	ip,
	share
	from cfg_printers where serial='${ALX_SERIAL}'")
	#split'em up and put in an array
	declare -i i=0
	declare -i k=0
	if [ -n "${all}" ]
	then
	for x in ${all}
	do
	((k++))
	DB_PRINTER[${i}]="${DB_PRINTER[${i}]} ${x}"
	if [ ${k} -eq 4 ]
	then
	((i++))
	#reset $k
	declare -i k=0
	fi
	done
	count=${i}
	else
	count=0
	fi
	#echo settings
	echo "Number of new printers: ${count}"
	for ((i=0; i < count; i++))
	do
	echo "${i} printer:"
	for x in ${DB_PRINTER[${i}]}
	do
	echo "    ${x}"
	done
	done
	#import settings (only if counter > 0)
	local prnset
	#delete all printers (*always*)
	if [ -d ${SETTINGS_TEMPLATE}/system/printing ]
	then
	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	[ -d ${SETTINGSPATH}/delete ] && rm -rf ${SETTINGSPATH}/delete
	install -d ${SETTINGSPATH}/delete
	mv -f ${SETTINGS_TEMPLATE}/system/printing/* ${SETTINGSPATH}/delete
	rm -rf ${SETTINGS_TEMPLATE}/system/printing
	#set update flag (*always*)
	ALX_PRINTER_SETUP=true
	fi
	if [ ${count} -gt 0 ]
	then
	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	[ ! -d ${SETTINGSPATH}/printing ] && install -d ${SETTINGSPATH}/printing
	for ((i=0; i < count; i++))
	do
	declare -i k=0
	for x in ${DB_PRINTER[${i}]}
	do
	prnset[${k}]=${x}
	((k++))
	done
	echo "PRINTERNAME=${prnset[0]}" >  ${SETTINGSPATH}/printing/${prnset[0]}
	echo "PRINTING=${prnset[1]}" >> ${SETTINGSPATH}/printing/${prnset[0]}
	echo "IP=${prnset[2]}" >> ${SETTINGSPATH}/printing/${prnset[0]}
	echo "SHARE=${prnset[3]}" >> ${SETTINGSPATH}/printing/${prnset[0]}
	done
	#set update flag (*always*)
	ALX_PRINTER_SETUP=true
	fi
	}
	update_system_settings(){
	source /opt/alx-config/Configurator/config_functions.sh
	echo -e ${COLMAGENTA}"Checking system setup ..."${COLDEFAULT}
	echo
	echo "network"
	validate_networking
	echo
	echo "xserver"
	validate_xserver
	echo
	echo "sessions"
	validate_sessions
	echo
	#echo "printers"
	#validate_printing
	#echo
	if [ "${ALX_NETWORK_SETUP}" == "true" ]
	then
	echo -e ${COLMAGENTA}"Updating network settings"${COLDEFAULT}
	setup_modules
	setup_network
	fi
	if [ "${ALX_XSERVER_SETUP}" == "true" ]
	then
	echo -e ${COLMAGENTA}"Updating xserver settings"${COLDEFAULT}
	setup_xfree
	fi
	if [ "${ALX_SESSION_SETUP}" == "true" ]
	then
	echo -e ${COLMAGENTA}"Updating session settings"${COLDEFAULT}
	setup_sessions
	fi
	#if [ "${ALX_PRINTER_SETUP}" == "true" ]
	#then
	# echo -e ${COLMAGENTA}"Updating printer settings"${COLDEFAULT}
	# setup_printers
	#fi
	#clean up temp files
	local SETTINGSPATH
	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	#[ -d ${SETTINGSPATH} ] && rm -rf ${SETTINGSPATH}
	}
110
111	get_system_serial(){	CUR_IP=$(ifconfig ${ALX_IFACE} | sed -n '/addr:/s/ [^r]*..//gp')
112		CUR_MAC=$(ifconfig ${ALX_IFACE} | grep HWaddr | cut -d ' ' -f11)
113		CUR_MTIME=$(date +%s)
114
115	local CUR_IP CUR_MAC CUR_MTIME	rc_print "Trying to validate my serial ..."
116
117	#check if serial file exists	# nice serial output
	if [ -f /etc/alx-config/serial ]
	then
	source /etc/alx-config/serial
	# if system is already configured, it *has* a hostname.
	# so we take the hostname of this system here
	source /etc/hostname
	#start preliminary networking (dhcp)
	preliminary_network start
	CUR_IP=$(/sbin/ifconfig eth0 | sed -n '/addr:/s/ [^r]*..//gp')
	CUR_MAC=$(/sbin/ifconfig eth0 | grep HWaddr | cut -d ' ' -f11)
	CUR_MTIME=$(date +%s)
	echo -e ${COLOREDSTAR} "Trying to validate my serial ..."
	#nice serial output
118	$CURS_UP	$CURS_UP
119	$SET_WCOL	$SET_WCOL
120	echo "[ SN: ${ALX_SERIAL} ]"	echo "[ SN: ${ALX_SERIAL} ]"
	# #is this system outdated ?
	# #MY_HOSTNAME=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# # "select hostname from cfg_serial where id='${ALX_SERIAL}'")
	#
	# #we do this now with the date instead of the hostname
	# local MY_ALX_REG_DATE
	# MY_ALX_REG_DATE=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select mtime from client_serial where serial='${ALX_SERIAL}'")
	#
	# #if [ "${MY_HOSTNAME}" == "${HOSTNAME}" ]
	# if [ "${MY_ALX_REG_DATE}" == "${ALX_REG_DATE}" ]
	# then
	# #set ALX_STATE to ok so everybody that everything was ok
	# ALX_STATE=ok
	#
	# evaluate_retval
	# else
	# #print false (works only if this is the first statement here)
	# evaluate_retval
	#
	# #set ALX_STATE to error so everybody sees there was an error
	# ALX_STATE=error
	# fi
121
122	if validate_serial "${ALX_SERIAL}" "${ALX_REG_DATE}" "${CUR_MAC}"	if validate_serial "${ALX_SERIAL}" "${ALX_REG_DATE}" "${CUR_MAC}"
123	then	then
124	ALX_STATE="ok"	ALX_STATE="ok"
125	else	else
126		# abort on non valid serial
127	ALX_STATE="invalid serial"	ALX_STATE="invalid serial"
128		echo "ALX_STATE=\"${ALX_STATE}\"" > /etc/alxconfig-ng/state/state
129		show_invalid_serial_msg
130		exit 1
131	fi	fi
132
133	else	else
134	#run hardware detection	# run hardware detection
135	echo	echo
136	echo -e ${COLMAGENTA}"Preparing system for first boot"${COLDEFAULT}	if [[ ${ALX_FORCED_RECHECK} = true ]]
137		then
138		rc_mecho "Hardware autodetection forced by system-administrator"
139		# always disable CONFD_NETWORKING here
140		export ALX_CONFD_NETWORKING="false"
141		else
142		rc_mecho "Preparing system for first boot"
143		fi
144	ALX_HW_DETECT=true	ALX_HW_DETECT=true
145	/etc/init.d/hwdetect start	hwsetup
146
147	#set hostname to alx_default_hostname	# set hostname to alx_default_hostname
148		# use old hostname if this is a forced re-check
149		[[ ${ALX_FORCED_RECHECK} = true ]] && ALX_DEFAULT_HOSTNAME="$(< /etc/hostname)"
150	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx
151	HOSTNAME="${ALX_DEFAULT_HOSTNAME}"	HOSTNAME="${ALX_DEFAULT_HOSTNAME}"
152
153	#update the hostname on the system for sure	# update the hostname on the system for sure
154	echo "HOSTNAME=${HOSTNAME}" > /etc/hostname	echo "${HOSTNAME}" > /etc/hostname
155
156	#start preliminary networking (dhcp)	# start preliminary networking (dhcp)
157	preliminary_network start	preliminary_network start
158
159		# check if mysql server is reachable
160		# if not abort this script
161		if ! reach_mysql_server
162		then
163		preliminary_network stop
164		exit 1
165		fi
166
167
168	CUR_IP=$(/sbin/ifconfig eth0 | sed -n '/addr:/s/ [^r]*..//gp')	CUR_IP=$(/sbin/ifconfig eth0 | sed -n '/addr:/s/ [^r]*..//gp')
169	CUR_MAC=$(/sbin/ifconfig eth0 | grep HWaddr | cut -d ' ' -f11)	CUR_MAC=$(/sbin/ifconfig eth0 | grep HWaddr | cut -d ' ' -f11)
170	CUR_MTIME=$(date +%s)	CUR_MTIME=$(date +%s)
	echo -e ${COLOREDSTAR} "Trying to get new serial ..."
	#request new serial
	#ALX_REG_DATE="$(date +%F)"
	#we're using the mtime now (better for vaildating the serial)
	mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"insert into client_serials(
	mtime,
	mac
	)
	values(
	'${CUR_MTIME}',
	'${CUR_MAC}'
	);"
	#then validate and retrieve serial
	### warning must be changed that only the LAST ID will be fetched,  ###
	### or you get error if the computer name and date are the same     ###
	### you have more then one serial number than                       ###
	#not 100% working may get more than *one* id
	#ALX_SERIAL=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select id from cfg_serial where datum='${ALX_REG_DATE}' and hostname='${HOSTNAME}'")
	#select highest id only (added max)
	ALX_SERIAL=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select max(serial) from client_serials where mtime='${CUR_MTIME}' and mac='${CUR_MAC}'")
171
172	if [ "${ALX_SERIAL}" != NULL ]	# abort now if this is a forced re-check
173		if [[ ${ALX_FORCED_RECHECK} = true ]]
174	then	then
175	#nice serial output	# but first check the serial
176		source /etc/alxconfig-ng/serial
177
178		rc_print "Trying to validate my serial ..."
179
180		# nice serial output
181	$CURS_UP	$CURS_UP
182	$SET_WCOL	$SET_WCOL
183	echo "[ SN: ${ALX_SERIAL} ]"	echo "[ SN: ${ALX_SERIAL} ]"
184
185	#set ALX_STATE to ok so everybody that everything was ok	if validate_serial "${ALX_SERIAL}" "${ALX_REG_DATE}" "${CUR_MAC}"
186		then
187		ALX_STATE="ok"
188		else
189		# abort on non valid serial
190		ALX_STATE="invalid serial"
191		echo "ALX_STATE=${ALX_STATE}" > /etc/alxconfig-ng/state/state
192		show_invalid_serial_msg
193		exit 1
194		fi
195
196		# write current state to temp file
197		echo "ALX_STATE=\"${ALX_STATE}\"" > /etc/alxconfig-ng/state/state
198		[ -f /hardware-auto-detection ] && rm /hardware-auto-detection
199
200		# now export ALX_FORCED_RECHECK=true
201		# that the setting will be updated not inserted !
202		export ALX_FORCED_RECHECK=true
203		return 0
204		fi
205
206		rc_print "Trying to get new serial ..."
207
208		# request a new serial; one command now (cause must be done in the same session)
209		ALX_SERIAL=$(mysqldo "insert into client_serials (mtime, mac) values('${CUR_MTIME}','${CUR_MAC}');
210		select last_insert_id();")
211
212		if [[ ${ALX_SERIAL} != NULL ]]
213		then
214		# nice serial output
215		$CURS_UP
216		$SET_WCOL
217		echo "[ SN: ${ALX_SERIAL} ]"
218
219		# set ALX_STATE to ok so everybody knows that everything was ok
220	ALX_STATE=ok	ALX_STATE=ok
221
222	echo "ALX_SERIAL=${ALX_SERIAL}" > /etc/alx-config/serial	echo "ALX_SERIAL=\"${ALX_SERIAL}\"" > /etc/alxconfig-ng/serial
223	echo "ALX_REG_DATE=${CUR_MTIME}" >> /etc/alx-config/serial	echo "ALX_REG_DATE=\"${CUR_MTIME}\"" >> /etc/alxconfig-ng/serial
224
225	evaluate_retval	evaluate_retval
226	else	else
227	#print false (works only if this is the first statement here)	# print false (works only if this is the first statement here)
228	evaluate_retval	evaluate_retval
229
230	#set ALX_STATE to error so everybody sees there was an error	# set ALX_STATE to error so everybody sees there was an error
231	ALX_STATE=error	ALX_STATE=error
232
233	#show an error that no new serial was found	# show an error that no new serial was found
234	#nice serial output	# nice serial output
235	$CURS_UP	$CURS_UP
236	$SET_WCOL	$SET_WCOL
237	echo -e "[ SN: ${COLRED}None, 0${COLDEFAULT} ]"	echo -e "[ SN: ${COLRED}None, 0${COLDEFAULT} ]"
238	fi	fi
239	fi	fi
240
241	#write current state to temp file	# write current state to temp file
242	echo "ALX_STATE=${ALX_STATE}" > /etc/alx-config/state/state	echo "ALX_STATE=\"${ALX_STATE}\"" > /etc/alxconfig-ng/state/state
243		echo "ALX_IFACE=\"${ALX_IFACE}\"" >> /etc/alxconfig-ng/state/state
244	}	}
245
246
247	check_is_configured() {	check_is_configured()
248	if [ -f /etc/alx-config/state/configured ]	{
249		if [ -f /etc/alxconfig-ng/state/configured ]
250	then	then
251	export ALX_CONFIGURED=true	export ALX_CONFIGURED=true
252	else	else
#	Line 927  check_is_configured() {	Line 256  check_is_configured() {
256
257
258	# imports current settings to the database resolved by the hardware detection	# imports current settings to the database resolved by the hardware detection
259	import_settings_to_db() {	import_settings_to_db()
260	#note: networking is always 'dhcp' if hw was autodetected	{
261	#note: default_domain/hostname is set in config.rc	# note: networking is always 'dhcp' if hw was autodetected
262		# note: default_domain/hostname is set in config.rc
263	#to be safe, we do some sanity checks
264		# to be safe, we do some sanity checks
265	[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain	[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain
266	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx
267
268	#vars used by hwdetect	# vars used by hwsetup
269	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
270	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
271	local MOUSETYPE XMOUSETYPE FULLNAME DEVICE	local MOUSETYPE XMOUSETYPE FULLNAME DEVICE
272
273	#get setting from hwdetect	# get setting from hwsetup
274	source /etc/sysconfig/hwsetup/knoppix	source /etc/conf.d/hwsetup/knoppix
275	source /etc/sysconfig/hwsetup/mouse	source /etc/conf.d/hwsetup/mouse
276
277	echo	echo
278	echo -e ${COLMAGENTA}"Importing detected settings to database"${COLDEFAULT}	rc_mecho "Importing detected settings to database"
279
280	#network	# network
281	echo -e "      Network settings ..."	rc_mecho "      Network settings ..."
282	mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \	if [[ ${ALX_CONFD_NETWORKING} = true ]]
283	"insert into cfg_network(	then
284	hostname,	# get settings
285	serial,	for iface in $(onboot_interface_list ${network_settings}/net.*)
286	module,	do
287	domain,	[[ $(< ${SETTINGSPATH}/confd-networking) != ${iface} ]] && continue
288	networking	rc_echo "WARNING: only importing settings for interface [ ${iface} ] !"
289	)	source ${network_settings}/net.${iface} || echo "Error: could not read '${network_settings}/net.${iface}'"
290	values(	NETCARD_DRIVER="$(cat /etc/modprobe.d/net.${iface}.conf | cut -d' ' -f3)"
291	'${ALX_DEFAULT_HOSTNAME}',
292	'${ALX_SERIAL}',	mysqldo "insert into cfg_network(
293	'${NETCARD_DRIVER}',	hostname,
294	'${ALX_DEFAULT_DOMAIN}',	serial,
295	'dhcp'	module,
296	);"	domain,
297		networking,
298		netmask,
299		dns,
300		gateway,
301		broadcast,
302		ip,
303		forcemacto,
304		wireless_bitrate,
305		wireless_channel,
306		wireless_essid,
307		wireless_frequency,
308		wireless_mode,
309		wireless_nick,
310		wireless_auth_mode,
311		wireless_key_length,
312		wireless_key,
313		wireless_key_ascii
314		)
315		values(
316		'${ALX_DEFAULT_HOSTNAME}',
317		'${ALX_SERIAL}',
318		'${NETCARD_DRIVER}',
319		'${ALX_DEFAULT_DOMAIN}',
320		'${NETWORKING}',
321		'${NETMASK}',
322		'${NAMESERVER}',
323		'${GATEWAY}',
324		'${BROADCAST}',
325		'${IP}',
326		'${FORCE_MAC_TO}',
327		'${WIRELESS_BITRATE}',
328		'${WIRELESS_CHANNEL}',
329		'${WIRELESS_ESSID}',
330		'${WIRELESS_FREQUENCY}',
331		'${WIRELESS_MODE}',
332		'${WIRELESS_NICK}',
333		'${WIRELESS_AUTH_MODE}',
334		'${WIRELESS_KEY_LENGTH}',
335		'${WIRELESS_KEY}',
336		'${WIRELESS_KEY_ASCII}'
337		);"
338
339		# only insert the *FIRST* iface
340		break
341		done
342		else
343		mysqldo "insert into cfg_network(
344		hostname,
345		serial,
346		module,
347		domain,
348		networking
349		)
350		values(
351		'${ALX_DEFAULT_HOSTNAME}',
352		'${ALX_SERIAL}',
353		'${NETCARD_DRIVER}',
354		'${ALX_DEFAULT_DOMAIN}',
355		'dhcp'
356		);"
357		fi
358	evaluate_retval	evaluate_retval
359
360	#xserver	# xserver
361	echo -e "      Graphic settings ..."	rc_mecho "      Graphic settings ..."
362	#xserver general	# xserver general
363	( mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \	( mysqldo "insert into cfg_graphic(
	"insert into cfg_graphic(
364	serial,	serial,
365	module,	module,
366	resolution,	resolution,
367	depth	depth,
368		refresh_rate
369	)	)
370	values(	values(
371	'${ALX_SERIAL}',	'${ALX_SERIAL}',
372	'${XMODULE}',	'${XMODULE}',
373	'1024x768',	'1024x768',
374	'16'	'16',
375	);";	'60'
376	#xserver monitor	);"; )
377	mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \	evaluate_retval
378	"insert into cfg_monitor(
379		# input
380		rc_mecho "      Input settings ..."
381		mysqldo "insert into cfg_input(serial,mouse) values('${ALX_SERIAL}','${XMOUSETYPE}');"
382		evaluate_retval
383
384		# auth
385		rc_mecho "      Authentification settings ..."
386		mysqldo "insert into client_auth(
387	serial,	serial,
388	vendor,	username,
389	model,	shell,
390	hsync,	vnc,
391	vrefresh	samba,
392		station
393	)	)
394	values(	values(
395	'${ALX_SERIAL}',	'${ALX_SERIAL}',
396	'Aamazing',	'${ALX_UNPRIV_USER}',
397	'CM-1528-FS',	'',
398	'28-64',	'',
399	'47-104'	'',
400	);";	''
401		);"
402	# input	evaluate_retval
403	mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
404	"insert into cfg_input(serial,mouse) values('${ALX_SERIAL}','${XMOUSETYPE}');";)	# exchange ssh rsa keys - the first boot needs this !
405		# or no reboot will work via the webadmin
406		rc_mecho "      SSH authentification settings ..."
407		HOME=/root config_ssh_auth
408		evaluate_retval
409
410		# autostart
411		rc_mecho "      Autostart settings ..."
412		mysqldo "insert into cfg_autostart(serial,session) values('${ALX_SERIAL}','');"
413
414		# screensaver
415		rc_mecho "      Screensaver settings ..."
416		mysqldo "insert into cfg_screensaver(serial,screensaver) values('${ALX_SERIAL}','')"
417
418		# version info
419		rc_mecho "      OS version info ..."
420		local alx_os
421		local alx_utils
422		alx_os="$(< /etc/mageversion)"
423		alx_utils="$(magequery -n alxconfig-ng-alx | sed 's:.*\[\ \(.*\)\ \].*:\1:')"
424		alx_utils="${alx_utils/alxconfig-ng-alx-}"
425		mysqldo "insert into client_version(serial,os,utils) values('${ALX_SERIAL}','${alx_os}','${alx_utils}')"
426
427	evaluate_retval	evaluate_retval
428	}	}
429
430	# imports current settings to the local system resolved by the hardware detection	# imports current settings to the database resolved by the hardware detection
431	import_settings_local(){	update_settings_in_db()
432	#note: networking is always 'dhcp' if hw was autodetected	{
433	#note: default_domain/hostname is set in config.rc	# note: networking is always 'dhcp' if hw was autodetected
434		# note: default_domain/hostname is set in config.rc or exported
435	#to be safe, we do some sanity checks	# note: we updating only hardware settings here !
436
437		# to be safe, we do some sanity checks
438	[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain	[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain
439	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx
440
441	#vars used by hwdetect	# vars used by hwsetup
442	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
443	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
444	local MOUSETYPE XMOUSETYPE FULLNAME DEVICE	local MOUSETYPE XMOUSETYPE FULLNAME DEVICE
445
446		# get setting from hwsetup
447	#get setting from hwdetect	source /etc/conf.d/hwsetup/knoppix
448	source /etc/sysconfig/hwsetup/knoppix	source /etc/conf.d/hwsetup/mouse
449	source /etc/sysconfig/hwsetup/mouse
450	echo	echo
451	echo -e ${COLMAGENTA}"Importing detected settings to local system"${COLDEFAULT}	rc_mecho "Updating detected settings in database"
452
453		# network
454	#allready configured, no update needed so we put it to system	rc_mecho "      Network settings ..."
455	SETTINGSPATH=${SETTINGS_TEMPLATE}/system	if [[ ${ALX_CONFD_NETWORKING} = true ]]
456		then
457		# get settings
458	#network	#source ${rc_base}/init.d/network &> /dev/null
459	echo -e "      Network settings ..."	for iface in $(onboot_interface_list ${network_settings}/net.*)
460		do
461		[[ $(< ${SETTINGSPATH}/confd-networking) != ${iface} ]] && continue
462		rc_echo "WARNING: only importing settings for interface [ ${iface} ] !"
463		source ${network_settings}/net.${iface} || exit 1
464		NETCARD_DRIVER="$(cat /etc/modprobe.d/net.${iface}.conf | cut -d' ' -f3)"
465
466		mysqldo "update cfg_network set
467		hostname='${ALX_DEFAULT_HOSTNAME}',
468		module='${NETCARD_DRIVER}',
469		domain='${ALX_DEFAULT_DOMAIN}',
470		networking='${NETWORKING}',
471		netmask='${NETMASK}',
472		dns='${NAMESERVER}',
473		gateway='${GATEWAY}',
474		broadcast='${BROADCAST}',
475		ip='${IP}',
476		forcemacto='${FORCE_MAC_TO}',
477		wireless_bitrate='${WIRELESS_BITRATE}',
478		wireless_channel='${WIRELESS_CHANNEL}',
479		wireless_essid='${WIRELESS_ESSID}',
480		wireless_frequency='${WIRELESS_FREQUENCY}',
481		wireless_mode='${WIRELESS_MODE}',
482		wireless_nick='${WIRELESS_NICK}',
483		wireless_auth_mode='${WIRELESS_AUTH_MODE}',
484		wireless_key_length='${WIRELESS_KEY_LENGTH}',
485		wireless_key='${WIRELESS_KEY}',
486		wireless_key_ascii='${WIRELESS_KEY_ASCII}'
487		where serial=${ALX_SERIAL};"
488
489	[ ! -d ${SETTINGSPATH}/modules ] && install -d ${SETTINGSPATH}/modules	# only insert the *FIRST* iface
490	echo "${NETCARD_DRIVER}" > ${SETTINGSPATH}/modules/modules	break
491		done
492	[ ! -d ${SETTINGSPATH}/network ] && install -d ${SETTINGSPATH}/network	else
493	( echo "${ALX_DEFAULT_HOSTNAME}" > ${SETTINGSPATH}/network/hostname;	mysqldo "update cfg_network set
494	echo "${ALX_DEFAULT_DOMAIN}" > ${SETTINGSPATH}/network/domain;	hostname='${ALX_DEFAULT_HOSTNAME}',
495	echo "dhcp" > ${SETTINGSPATH}/network/networking )	module='${NETCARD_DRIVER}',
496		domain='${ALX_DEFAULT_DOMAIN}',
497		networking='dhcp'
498		where serial=${ALX_SERIAL};"
499		fi
500	evaluate_retval	evaluate_retval
501
502		# xserver
503	#xserver	rc_mecho "      Graphic settings ..."
504	echo -e "      Graphic settings ..."	# xserver general
505		mysqldo "update cfg_graphic set
506	[ ! -d ${SETTINGSPATH}/vga ] && install -d ${SETTINGSPATH}/vga	module='${XMODULE}',
507	[ ! -d ${SETTINGSPATH}/mouse ] && install -d ${SETTINGSPATH}/mouse	resolution='1024x768',
508	[ ! -d ${SETTINGSPATH}/monitor ] && install -d ${SETTINGSPATH}/monitor	depth='16',
509	( echo "${XMODULE}" > ${SETTINGSPATH}/vga/vga;	refresh_rate='60'
510	echo "16" > ${SETTINGSPATH}/vga/vgadepth;	where serial=${ALX_SERIAL};"
	echo "1024x768" > ${SETTINGSPATH}/vga/vgares;
	echo "${XMOUSETYPE}" > ${SETTINGSPATH}/mouse/mouse;
	echo "myvendor=\"Aamazing\"" > ${SETTINGSPATH}/monitor/monitor;
	echo "mymodel=\"CM-1528-FS\"" >> ${SETTINGSPATH}/monitor/monitor;
	echo "hsync=\"28-64\"" >> ${SETTINGSPATH}/monitor/monitor;
	echo "vref=\"47-104\"" >> ${SETTINGSPATH}/monitor/monitor;)
511	evaluate_retval	evaluate_retval
512
513	#set system state to 'already configured'	# input
514	touch /etc/alx-config/state/configured	rc_mecho "      Input settings ..."
515		mysqldo "update cfg_input set mouse='${XMOUSETYPE}' where serial=${ALX_SERIAL};"
516		evaluate_retval
517
518		# version info
519		rc_mecho "      OS version info ..."
520		local alx_os
521		local alx_utils
522		alx_os="$(< /etc/mageversion)"
523		alx_utils="$(magequery -n alxconfig-ng-alx | sed 's:.*\[\ \(.*\)\ \].*:\1:')"
524		alx_utils="${alx_utils/alxconfig-ng-alx-}"
525		mysqldo "update client_version set os='${alx_os}', utils='${alx_utils}' where serial=${ALX_SERIAL};"
526	}	}
527
528	#start|stop	# imports current settings to the local system resolved by the hardware detection
529	preliminary_network(){	# we only need the network settings
530		import_settings_local()
531		{
532		# note: networking is always 'dhcp' if hw was autodetected
533		# note: default_domain/hostname is set in config.rc
534
535		# to be safe, we do some sanity checks
536		[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain
537		[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx
538
539		# vars used by hwsetup
540		local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
541		local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
542		local MOUSETYPE XMOUSETYPE FULLNAME DEVICE
543
544		# get setting from hwsetup
545		source /etc/conf.d/hwsetup/knoppix
546
547		echo
548		rc_mecho "Importing detected settings to local system"
549
550		if [[ ${ALX_CONFD_NETWORKING} = false ]]
551		then
552		# set an device alias for modprobe.conf
553		[ ! -d /etc/modprobe.d ] && install -d /etc/modprobe.d
554		echo "alias eth0 ${NETCARD_DRIVER}" > /etc/modprobe.d/net.eth0.conf
555
556		# regenerate modprobe.conf
557		[ -x $(which modules-update) ] && modules-update || rc_echo "modules-update not found!"
558		evaluate_retval
559		fi
560
561		# set system state to 'already configured'
562		touch /etc/alxconfig-ng/state/configured
563
564		# install slim desktopmanager configuration
565		config_display_manager
566
567		# if only an recheck was forced than abort now
568		[[ ${ALX_FORCED_RECHECK} = true ]] && return 0
569
570		# create a fresh fluxbox directory
571		[ -d ${ALX_UNPRIV_HOME}/.fluxbox ] && rm -rf ${ALX_UNPRIV_HOME}/.fluxbox
572		install -d ${ALX_UNPRIV_HOME}/.fluxbox
573
574		# now generate fluxbox config files
575
576		# fluxbox main config
577		cat ${ALX_SKELETONS}/fluxbox/init > ${ALX_UNPRIV_HOME}/.fluxbox/init
578
579		# fluxbox autostart
580		cat ${ALX_SKELETONS}/fluxbox/apps > ${ALX_UNPRIV_HOME}/.fluxbox/apps
581
582		# fluxbox menu header
583		cat ${ALX_SKELETONS}/fluxbox/menu.header > ${ALX_UNPRIV_HOME}/.fluxbox/menu
584
585		# now fix it with proper messages :P
586		local ver="$(< /etc/mageversion)"
587		sed -i "s:@CHANGEME@:alx-${ver}  #${ALX_SERIAL}:g" ${ALX_UNPRIV_HOME}/.fluxbox/menu
588
589		# add a newline (maybe there is no crlf in the header)
590		echo >> ${ALX_UNPRIV_HOME}/.fluxbox/menu
591
592		# fluxbox menu footer
593		cat ${ALX_SKELETONS}/fluxbox/menu.footer >> ${ALX_UNPRIV_HOME}/.fluxbox/menu
594
595		# add a newline (maybe there is no crlf in the footer)
596		echo >> ${ALX_UNPRIV_HOME}/.fluxbox/menu
597
598		# setup some standart icons (sysinfo.lnk)
599		# clean desktop icon location
600		[ -d ${ALX_UNPRIV_HOME}/.idesktop ] && rm -rf ${ALX_UNPRIV_HOME}/.idesktop
601		install -d ${ALX_UNPRIV_HOME}/.idesktop
602
603		# last but not least gen a icon with some sys informations
604		local sysinfo
605		local osversion
606		local xres
607		local yres
608
609		osversion="$(< /etc/mageversion)"
610		sysinfo="Hostname: ${ALX_DEFAULT_HOSTNAME} Serial: #${ALX_SERIAL} OS: alx-${osversion} Kernel: $(uname -r)"
611
612		# at first boot we got always a resolution of 1024x768-16@60
613		# middle of the screen
614		# (no txt - length required, xtdesk manage that itself)
615		xres="$((1024 / 2))"
616		# default y pos (full yres -22 !)
617		yres="$((768 - 22 ))"
618
619		generate_icon \
620		--name "${sysinfo}" \
621		--command "exit 0" \
622		--icon "${ALX_SESSIONS_ICONS}/sysinfo.png" \
623		--dest "${ALX_UNPRIV_HOME}/.idesktop/sysinfo.lnk" \
624		--xres "${xres}" \
625		--yres "${yres}" \
626		--icon-width "1" \
627		--icon-height "1"
628
629		# set correct permissions
630		chown ${ALX_UNPRIV_USER}:${ALX_UNPRIV_GROUP} ${ALX_UNPRIV_HOME}
631		chown ${ALX_UNPRIV_USER}:${ALX_UNPRIV_GROUP} ${ALX_UNPRIV_HOME}/.fluxbox
632		chmod 0755 ${ALX_UNPRIV_HOME}/.fluxbox
633		chmod 0755 ${ALX_UNPRIV_HOME}/.idesktop
634		chmod 0644 ${ALX_UNPRIV_HOME}/.ideskrc
635		}
636
637		# start|stop
638		preliminary_network()
639		{
640	local module	local module
641
642	if [ -f /etc/alx-config/state/configured ]	if [ -f /etc/alxconfig-ng/state/configured ]
643	then	then
644	#get module name	# compat for old clients
645	module=$(cat ${SETTINGS_TEMPLATE}/system/modules/modules)	if [ -f ${SETTINGSPATH}/modules ]
646	modprobe ${module}	then
647		# get module name
648		module=$(cat ${SETTINGSPATH}/modules)
649		modprobe ${module}
650		fi
651
652	else	else
653	#vars used by hwdetect	# vars used by hwsetup
654	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
655	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
656
657	#get setting from hwdetect	# get setting from hwsetup
658	source /etc/sysconfig/hwsetup/knoppix	source /etc/conf.d/hwsetup/knoppix
659	modprobe ${NETCARD_DRIVER}	modprobe ${NETCARD_DRIVER}
660	fi	fi
661
662	case $1 in	case $1 in
663	start)	start)
664	# keeping like always safe:	# keeping like always safe:
665	# no network should be startet here,	# no network should be startet here,
666	# so we can delete all pid files if one exists	# so we can delete all pid files if one exists
667	if ps -A|grep dhcpcd > /dev/null	if [[ ! -z $(pidof $(basename ${ALX_DHCP_PROG})) ]]
668	then	then
669	echo -e ${COLMAGENTA}"Forcing network down"${COLDEFAULT}	rc_mecho "Forcing network down"
670	dhcpcd -k	killall $(basename ${ALX_DHCP_PROG}) &> /dev/null
671	sleep 1	sleep 1
672		fi
673		[[ ${ALX_CONFD_NETWORKING} = true ]] && ${rc_base}/init.d/network stop
674
675		rc_mecho "Starting preliminary networking ... "
676
677		# start network configured from /etc/conf.d
678		if [[ ${ALX_CONFD_NETWORKING} = true ]]
679		then
680		${rc_base}/init.d/network start
681	else	else
682	rm -f /var/run/dhcpcd-eth?.pid	rc_print "Starting default dhcp based networking ... "
683		${ALX_DHCP_PROG} ${ALX_DHCP_START} &> /dev/null
684		evaluate_retval
685	fi	fi
	echo -e ${COLMAGENTA}"Starting preliminary network ... "${COLDEFAULT}
	#dhcpcd &> /dev/null #&& echo "ok" || echo "false"
	# aka_fix ########################################
	ifconfig eth0 128.20.222.222 netmask 255.255.0.0 up
	route del default gw 128.20.50.13 &> /dev/null
	route add default gw 128.20.50.21 &> /dev/null
	echo "nameserver 128.20.50.21" > /etc/resolv.conf
	##################################################
	evaluate_retval
686	;;	;;
687
688	stop)	stop)
689	echo -e ${COLMAGENTA}"Stopping preliminary network ... "${COLDEFAULT}	rc_mecho "Stopping preliminary networking ... "
690	ifconfig eth0 down	if [[ ${ALX_CONFD_NETWORKING} = true ]]
691	if ps -A|grep dhcpcd > /dev/null	then
692		${rc_base}/init.d/network stop
693		else
694		rc_print "Stopping default dhcp based networking ... "
695		ifconfig ${ALX_IFACE} down
696		fi
697		if [[ ! -z $(pidof $(basename ${ALX_DHCP_PROG})) ]]
698	then	then
699	#echo -en ${COLMAGENTA}"Stopping preliminary network ... "${COLDEFAULT}	killall $(basename ${ALX_DHCP_PROG}) &> /dev/null
700	dhcpcd -z  &> /dev/null	sleep 1
701	fi	fi
702	evaluate_retval	evaluate_retval
703	;;	;;
704
705	*)	*)
706	echo "Usage: preliminary_network {start|stop}"	echo "Usage: preliminary_network {start|stop}"
707	;;	;;
708	esac	esac
709	}	}
710
711		reset_system_settings()
712		{
713		# force load of de kbdkeys
714		loadkeys -q de
715		rc_echo
716		rc_echo -en ${COLRED}
717		rc_echo -n "*** Warning: you are about to reset *all* local settings on this system!"
718		rc_echo -e ${COLDEFAULT}
719		rc_echo "*** Do you really want to continue ?"
720		rc_echo -n "*** Enter 'yes' to continue, anything else to abort: "
721		read kbinsert
722		if [[ ${kbinsert} = yes ]]
723		then
724		rc_echo -en ${COLRED}
725		rc_echo -n "*** OK, you really want it ... killing all settings: "
726		for i in 3 2 1 now
727		do
728		rc_echo -n " ${i}"
729		sleep 1
730		done
731		rc_echo -e ${COLDEFAULT}
732
733		## reset all settings:
734		rm -rf ${SETTINGSPATH}/*
735		rm -f /etc/alxconfig-ng/serial
736		rm -rf /etc/alxconfig-ng/state
737
738		# clear all printers & net-shares
739		:> /etc/printcap
740
741		# remove lprng
742		rc-config del lprng &> /dev/null
743
744		# remove all user settings
745		[ -d ${ALX_UNPRIV_HOME} ] && rm -rf ${ALX_UNPRIV_HOME}
746
747		# remove all ica-sessions
748		find ${ALX_ICA_SESSIONS} -type f -name '*.ica' | xargs rm
749
750		# remove all old nics and modules configs
751		find /etc/conf.d -type f -name 'net.*' | xargs rm
752		find /etc/modprobe.d -type f -name 'net.*' | xargs rm
753
754		# restore default networking
755		cat ${ALX_SKELETONS}/net/net.eth0 > /etc/conf.d/net.eth0
756
757		rc_echo "I am done now, press [Enter] to reboot system ..."
758		else
759		rc_echo "Aborted, press [Enter] to reboot system ..."
760		fi
761		read
762		reboot
763		}
764
765		onboot_interface_list()
766		{
767		local file
768		local devices
769		local iface
770
771		# get list of all devices
772		for file in $@
773		do
774		if [[ $(read_value ONBOOT ${file}) = yes ]]
775		then
776		iface="$(basename ${file} | sed s/net.//)"
777		# exclude backup files
778		case "${iface}" in
779		*~) ;;
780		*) devices="${devices} $(basename ${file} | sed s/net.//)" ;;
781		esac
782		fi
783		done
784
785		echo "${devices}"
786		}
787
788		# read values from net.* files
789		read_value()
790		{
791		local var="$1"
792		local file="$2"
793		local value
794
795		# local all possible vars
796		# global
797		local ONBOOT
798		local NETWORKING
799
800		# static
801		local IP
802		local NETMASK
803		local BROADCAST
804		local NETWORKING
805		local FORCE_MAC_TO
806
807		# dhcp
808		local DHCP_PROG
809		local DHCP_START
810		local DHCP_STOP
811
812		# default gw
813		local GATEWAY
814		local GATEWAY_IF
815
816		# wireless extensions
817		local WIRELESS_AP
818		local WIRELESS_AUTH_MODE
819		local WIRELESS_BITRATE
820		local WIRELESS_CHANNEL
821		local WIRELESS_DEFAULT_KEY
822		local WIRELESS_ESSID
823		local WIRELESS_FREQUENCY
824		local WIRELESS_KEY
825		local WIRELESS_KEY_ASCII
826		local WIRELESS_KEY_0
827		local WIRELESS_KEY_1
828		local WIRELESS_KEY_2
829		local WIRELESS_KEY_3
830		local WIRELESS_KEY_LENGTH
831		local WIRELESS_MODE
832		local WIRELESS_NICK
833		local WIRELESS_NWID
834		local WIRELESS_POWER
835
836		source ${file}
837		eval value=\$$(echo ${var})
838		echo "${value}"
839		}
840
841	case $1 in	case $1 in
842	start)	start)
843	#retrieve or validate current serial	# check for global overrides
844		[ -f ${SETTINGSPATH}/confd-networking ] && ALX_CONFD_NETWORKING=true
845		[ -f /hardware-auto-detection ] && ALX_FORCED_RECHECK=true
846		read_cmdline hardware-auto-detection && ALX_FORCED_RECHECK=true
847		read_cmdline alx-reset-settings && ALX_RESET_SETTINGS=true
848
849		# kill all settings if requested
850		if [[ ${ALX_RESET_SETTINGS} = true ]]
851		then
852		reset_system_settings
853		fi
854
855		# retrieve or validate current serial
856	get_system_serial	get_system_serial
857	if [ "${ALX_HW_DETECT}" == "true" ]	if [[ ${ALX_HW_DETECT} = true ]]
858	then	then
859	import_settings_to_db	if [[ ${ALX_FORCED_RECHECK} = true ]]
860		then
861		update_settings_in_db
862		else
863		import_settings_to_db
864		fi
865	import_settings_local	import_settings_local
866
867		# here we should also exchange the ssh keys
868		# or the system cannot be rebooted after
869		# the first start via the alx-webadmin
870		config_ssh_auth
871	fi	fi
	#now setup system configuration
	#alx_setup_or_whatever_it_will_be_called()
	[ "${ALX_HW_DETECT}" == "false" ] && update_system_settings
872
873	#stop at last the preliminary networking (dhcp)	# now setup system configuration
874		# alx_setup_or_whatever_it_will_be_called()
875		[[ ${ALX_HW_DETECT} = false ]] && update_system_settings
876
877		# stop at last the preliminary networking (dhcp)
878	preliminary_network stop	preliminary_network stop
879	;;	;;
880
881	stop)	stop)
882	#unset_alx_connected #--> now in alxsetstate-rc6	# unset_alx_connected #--> now in alxsetstate-rc6
883	# ! important !: del systemstate	# ! important !: del systemstate
884	[ -f /etc/alx-config/state/state ] && rm /etc/alx-config/state/state	[ -f /etc/alxconfig-ng/state/state ] && rm /etc/alxconfig-ng/state/state
885	sleep 0.1	sleep 0.1
886	;;	;;
887
888	*)	*)
889	echo "Usage: $0 {start|stop} ..."	echo "Usage: $0 {start|stop} ..."
890	;;	;;

---

Colored Diff Long Colored Diff Full Colored Diff Unidiff Context Diff Side by Side

Legend: Removed from v.221   changed lines   Added in v.2455