--- alx-src/trunk/alxconfig-ng/init.d/alxsettings	2005/03/08 20:49:14	221
+++ alx-src/branches/alxconf-060/init.d/alxsettings	2011/06/27 12:47:52	2455
@@ -1,8 +1,8 @@
 #!/bin/bash
-
+# $Id$
 # <niro@magellan-linux.de>
 
-#%rlevels: 7:s 0:k 6:k
+#%rlevels: 7:s 0:k
 #%start: 41
 #%stop: 01
 
@@ -19,905 +19,234 @@
 # if no changes are at server side they will be kept, if yes the get updated. 
 # the server settings has higher priority.
 
-#                       +-----+
-#                       |start|
-#                       +-----+
-#                          |
-#                          |
-#              start_preliminary_network
-#                          |
-#                          |       n
-#                  serial_check ------->  get_new_serial
-#                          |                      |
-#                         y|                      |
-#                          |           n          |
-#                check_is_configured ---->  run_hw_detection
-#                          |                      |
-#                         y|                      |
-#            n             |                      |
-#        +--------cfg_equal_to_db          import_settings_to_db
-#        |                 |                      |
-#   update_from_db        y|                      |
-#        |                 |                      |
-#   set_is_configured      |                  set_is_configured
-#        +-----------------|                      | 
-#                          +----------------------+
-#                          |
-#                          |
-#               stop_preliminary_network
-#                          |
-#                          |
-#                       +----+
-#                       |done|
-#                       +----+
-#                          |
-#                          |
-#                 normal_system_bootup
-#                          |
-#                          .
-#                          .
-#                          .
-# 
-# 
-# 
-
-source /etc/sysconfig/rc
+source /etc/conf.d/rc
 source $rc_functions
 
-#mysql settings
-source /etc/alx-config/config.rc
-source /opt/alx-config/functions/mysqlfunctions
-source /opt/alx-config/functions/alx-mysql-functions
+# mysql settings
+source /etc/alxconfig-ng/config.rc
 
-#check if mysql is available
-[ -x /usr/bin/mysql ] && MYSQL_ALX=true
+# helper functions
+source /usr/lib/alxconfig-ng/functions/common
+source /usr/lib/alxconfig-ng/functions/mysqlfunctions
+source /usr/lib/alxconfig-ng/functions/serial_functions
+source /usr/lib/alxconfig-ng/functions/config_modules
+source /usr/lib/alxconfig-ng/functions/config_network
+source /usr/lib/alxconfig-ng/functions/config_printers
+source /usr/lib/alxconfig-ng/functions/config_sessions
+source /usr/lib/alxconfig-ng/functions/config_x11
+source /usr/lib/alxconfig-ng/functions/config_auth
+source /usr/lib/alxconfig-ng/functions/config_ssh_auth
+source /usr/lib/alxconfig-ng/functions/config_versions
 
-#other needed vars
+# other needed vars
 ALX_HW_DETECT=false
-ALX_NETWORK_SETUP=false
-ALX_XSERVER_SETUP=false
-ALX_SESSION_SETUP=false
-ALX_PRINTER_SETUP=false
+ALX_FORCED_RECHECK=false
+ALX_RESET_SETTINGS=false
+ALX_CONFD_NETWORKING=false
 
-#unset vars which may kill us
+# unset vars which may kill us
 unset ALX_SERIAL ALX_STATE
 
 
-#setup needed directories
-[ ! -d /etc/alx-config/state ] && install -d /etc/alx-config/state
+# setup needed directories
+[ ! -d /etc/alxconfig-ng/state ] && install -d /etc/alxconfig-ng/state
 
+update_system_settings()
+{
+	rc_mecho Checking system setup ...
 
-# still a need to implement this ?
-# #needed to detect usb/livecd boot
-# if [ -e /.bootdev ]
-# then
-# 	source /.bootdev
-# else
-# 	echo "Couldn't find /.bootdev. Aborting."
-# 	exit 1
-# fi
-
-# still a need to implement this ? --> media-check ?
-settings_import() {
-	if [ "${FSTYPE}" == "vfat" ]
-	then
-		if [ -e /mnt/cdrom/settings/system ]
-		then
-			echo -e ${COLOREDSTAR}"Importing old alx-settings ..."
-			( cp -R /mnt/cdrom/settings/system/* /etc/alx-config/settings/menu &&
-			  source /etc/alx-config/config.rc &&
-			  source /opt/alx-config/Configurator/config_functions.sh &&
-			  setup_xfree > /dev/null 2>&1 &&
-			  setup_modules > /dev/null 2>&1 &&
-			  setup_network > /dev/null 2>&1 &&
-			  #setup_printers > /dev/null 2>&1 &&
-			  setup_sessions > /dev/null 2>&1 &&
-			  touch /etc/alx-config/imported )
-			evaluate_retval
-		fi
-	fi
-}
+	# get the modules settings
+	# ! is the first thing that must be configured !
+	config_modules
 
+	# imports network settings from db
+	config_networking
 
-# this thingy needs an complete rewrite.
-# first get all settings from db server,
-# than check against local system settings,
-# if there are any differences, update the local settings,
-# as the server has a higher priority.
-# Important: write local settings only if they make sense,
-#            to have a fallback in case the server is down!
-#get_settings_from_server(){
-# 	#some needed arrays
-# 	#ARRAY_NETWORK #module domain networking netmask dns gateway
-# 	#SESSION #
-# 	#GRAFIK  #
-# 
-# 	echo "Importing now old Settings ..."
-# 	
-# 	local serial module domain networking netmask dns gateway i x all
-# 	
-# 	declare -i i=0
-# 	
-# 	#get hostname from database
-# 	MY_HOSTNAME=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
-# 		"select hostname from cfg_serial where id='${ALX_SERIAL}'")
-# 	
-# 	#get network settings from database
-# 	all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
-# 			"select module,
-# 				domain,
-# 				networking,
-# 				netmask,
-# 				dns,
-# 				gateway,
-# 				broadcast,
-# 				ip
-# 			from cfg_network where serial='${ALX_SERIAL}'")
-# 	#split'em up and put in array
-# 	for x in ${all}
-# 	do
-# 		ARRAY_NETWORK[${i}]=${x}
-# 		((i++))
-# 	done
-# 	echo " Network:"
-# 	echo "   MODULE:     ${ARRAY_NETWORK[0]}"
-# 	echo "   IP:         ${ARRAY_NETWORK[7]}"
-# 	echo "   HOSTNAME:   ${MY_HOSTNAME}"
-# 	echo "   DOMAIN:     ${ARRAY_NETWORK[1]}"
-# 	echo "   NETWORKING: ${ARRAY_NETWORK[2]}"
-# 	echo "   NETMASK:    ${ARRAY_NETWORK[3]}"
-# 	echo "   DNS:        ${ARRAY_NETWORK[4]}"
-# 	echo "   GATEWAY:    ${ARRAY_NETWORK[5]}"
-# 	echo "   BROADCAST:  ${ARRAY_NETWORK[6]}"
-# 	echo
-# 		
-# 	#get x settings from database
-# 	local module resolution
-# 	
-# 	#reset i
-# 	declare -i i=0
-# 	all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
-# 			"select module,
-# 				resolution
-# 			from cfg_grafik where serial='${ALX_SERIAL}'")
-# 	#split'em up and put in array
-# 	for x in ${all}
-# 	do
-# 		ARRAY_GRAFIK[${i}]=${x}
-# 		((i++))
-# 	done
-# 	
-# 	echo " VGA:"
-# 	echo "   MODULE:     ${ARRAY_GRAFIK[0]}"
-# 	echo "   RESOLUTION: ${ARRAY_GRAFIK[1]}"
-# 	echo
-# 	
-# 	#get ica-sessions from database
-# 	ARRAY_SESSIONS=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
-# 			"select session from cfg_session where serial='${ALX_SERIAL}'")
-# 	
-# 	echo " SESSIONS:"
-# 	declare -i i=0
-# 	for x in ${ARRAY_SESSIONS}
-# 	do
-# 		((i++))
-# 		echo "   SESSION${i}:   ${x}"
-# 	done
-# 	echo
-# 	
-# 	#now write these settings
-# 	local SETTINGSPATH
-# 	
-# 	#network
-# 	
-# 	#settings must be also set on system, so we put this to menu
-# 	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
-# 	
-# 	[ ! -d ${SETTINGSPATH}/modules ] && install -d ${SETTINGSPATH}/modules
-# 	echo "${ARRAY_NETWORK[0]}" > ${SETTINGSPATH}/modules/modules
-# 	
-# 	[ ! -d ${SETTINGSPATH}/network ] && install -d ${SETTINGSPATH}/network
-# 	echo "${MY_HOSTNAME}" > ${SETTINGSPATH}/network/hostname
-# 	echo "${ARRAY_NETWORK[1]}" > ${SETTINGSPATH}/network/domain
-# 	echo "${ARRAY_NETWORK[2]}" > ${SETTINGSPATH}/network/networking
-# 	[ -n "${ARRAY_NETWORK[3]}" ] && echo "${ARRAY_NETWORK[3]}" > ${SETTINGSPATH}/network/netmask
-# 	[ -n "${ARRAY_NETWORK[4]}" ] && echo "${ARRAY_NETWORK[4]}" > ${SETTINGSPATH}/network/dns
-# 	[ -n "${ARRAY_NETWORK[5]}" ] && echo "${ARRAY_NETWORK[5]}" > ${SETTINGSPATH}/network/gateway
-# 	[ -n "${ARRAY_NETWORK[6]}" ] && echo "${ARRAY_NETWORK[6]}" > ${SETTINGSPATH}/network/broadcast
-# 	[ -n "${ARRAY_NETWORK[7]}" ] && echo "${ARRAY_NETWORK[7]}" > ${SETTINGSPATH}/network/ip
+	# imports x11 settings from db
+	config_x11
 
+	# imports session settings from db
+	config_sessions
 
-validate_networking(){
-	#source /opt/alx-config/Configurator/config_functions.sh
+	# imports printer settings from db
+	config_printing
 
-	local x i all LOCAL_NETWORK DB_NETWORK SETTINGSPATH
-	
-	#all arrays:
-	# ->  hostname modules domain networking ip netmask dns gateway broadcast
+	# imports auth settings from db
+	config_auth
 
-  #networking
-	#get settings from local system
-	SETTINGSPATH=${SETTINGS_TEMPLATE}/system
-	declare -i i=0
-	for x in network/hostname \
-		modules/modules \
-		network/domain \
-		network/networking \
-		network/ip \
-		network/netmask \
-		network/dns \
-		network/gateway \
-		network/broadcast
-	do
-		if [ -f ${SETTINGSPATH}/${x} ]
-		then
-			#file exist, then use content
-			LOCAL_NETWORK[${i}]="$(< ${SETTINGSPATH}/${x})"
-		else
-			LOCAL_NETWORK[${i}]=""
-		fi
-		((i++))
-	done
-	
-	#get settings from database
-#	DB_NETWORK[0]=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
-#				"select hostname from cfg_network where serial='${ALX_SERIAL}'")
-	
-	all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
-			"select hostname,
-				module,
-				domain,
-				networking,
-				ip,
-				netmask,
-				dns,
-				gateway,
-				broadcast
-		from cfg_network where serial='${ALX_SERIAL}'")
-	
-	#split'em up and put in an array
-	declare -i i=0
-	for x in ${all}
-	do
-		DB_NETWORK[${i}]=${x}
-		((i++))
-	done
-	
-	#needed by the small hotfix
-	local FIX_ME
-	FIX_ME="${DB_NETWORK[2]}"
-	
-	
-	#now compare this stuff if they are equal
-	for ((i=0; i < 9; i++))
-	do
-		if [ "${DB_NETWORK[${i}]}" = "${LOCAL_NETWORK[${i}]}" ]
-		then
-			echo "${i}: ${DB_NETWORK[${i}]} == ${LOCAL_NETWORK[${i}]}"
-			
-			#delete equal stuff from DB_NETWORK
-			DB_NETWORK[${i}]="*NULL*"
-			
-		else
-			echo "${i}: ${DB_NETWORK[${i}]} != ${LOCAL_NETWORK[${i}]}"
-		fi
-	done
-	
-	
-	#update configs
-	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
-	declare -i i=0
-	for x in network/hostname \
-		modules/modules \
-		network/domain \
-		network/networking \
-		network/ip \
-		network/netmask \
-		network/dns \
-		network/gateway \
-		network/broadcast
-	do
-		#update only staff wich wasn't overwritten
-		if [ "${DB_NETWORK[${i}]}" != "*NULL*" ]
-		then
-			#create directory if not exist
-			if [ ! -d $(dirname ${SETTINGSPATH}/${x}) ] 
-			then
-				install -d $(dirname ${SETTINGSPATH}/${x})
-			fi
-			echo "${DB_NETWORK[${i}]}" > ${SETTINGSPATH}/${x}
-			
-			# theses fucking config functions:
-			# network gets only updated,
-			# if ${SETTINGS_TEMPLATE}/menu/network/networking exist
-			# so we force an update here
-			if [ ! -f ${SETTINGSPATH}/network/networking ]
-			then
-				[ ! -d ${SETTINGSPATH}/network ] && install -d ${SETTINGSPATH}/network
-				echo "${FIX_ME}" > ${SETTINGSPATH}/network/networking
-			fi
+	# exchange ssh rsa keys
+	HOME=/root config_ssh_auth
 
-			#set update flag
-			ALX_NETWORK_SETUP=true
-		fi
-		((i++))
-	done
+	# import version info
+	config_version
 }
 
+get_system_serial()
+{
+	local CUR_IP CUR_MAC CUR_MTIME ALX_IFACE
 
-
-validate_xserver(){
-	#source /opt/alx-config/Configurator/config_functions.sh
-	
-	local x i all LOCAL_XSERVER DB_XSERVER SETTINGSPATH
-
-	#all arrays:
-	# ->  xmodule resolution depth mouse monvendor monmodel hsync vref
-
-  #xserver
-	#get settings from local system
-	#vga
-	SETTINGSPATH=${SETTINGS_TEMPLATE}/system
-	declare -i i=0
-	for x in vga/vga \
-		vga/vgares \
-		vga/vgadepth
-	do
-		if [ -f ${SETTINGSPATH}/${x} ]
-		then
-			#file exist, then use content
-			LOCAL_XSERVER[${i}]="$(< ${SETTINGSPATH}/${x})"
-		else
-			LOCAL_XSERVER[${i}]=""
-		fi
-		((i++))
-	done
-	
-	#mouse
-	if [ -f ${SETTINGSPATH}/mouse/mouse ]
+	if [[ ${ALX_CONFD_NETWORKING} = true ]]
 	then
-		#file exist, then use content
-		LOCAL_XSERVER[3]="$(< ${SETTINGSPATH}/mouse/mouse)"
+		ALX_IFACE="$(< ${SETTINGSPATH}/confd-networking)"
 	else
-		LOCAL_XSERVER[3]=""
+		ALX_IFACE="eth0"
 	fi
-	
-	#monitor
-	local myvendor mymodel hsync vref 
-	if [ -f ${SETTINGSPATH}/monitor/monitor ]
-	then
-		source ${SETTINGSPATH}/monitor/monitor
-		
-		declare -i i=4
-		for x in "${myvendor}" \
-			"${mymodel}" \
-			"${hsync}" \
-			"${vref}"
-		do
-			LOCAL_XSERVER[${i}]="${x}"
-			((i++))
-		done
-	else
-		LOCAL_XSERVER[4]=""
-		LOCAL_XSERVER[5]=""
-		LOCAL_XSERVER[6]=""
-		LOCAL_XSERVER[7]=""
-	fi
-	
-	
-	#get settings from database
-	all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
-			"select module,
-				resolution,
-				depth
-		from cfg_graphic where serial='${ALX_SERIAL}'")
-	
-	#split'em up and put in an array
-	declare -i i=0
-	for x in ${all}
-	do
-		DB_XSERVER[${i}]=${x}
-		((i++))
-	done
-	
-	# read mouse
-	DB_XSERVER[3]=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
-				"select mouse from cfg_input where serial='${ALX_SERIAL}'")
-	
-	#monitors
-# 	all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
-# 			"select vendor,
-# 				model,
-# 				hsync,
-# 				vrefresh
-# 		from cfg_monitor where serial='${ALX_SERIAL}'")
-
-	all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
-		        "select vendor,
-				model,
-				hsync,
-				vrefresh
-			from list_monitors
-			inner join cfg_graphic
-			on cfg_graphic.monitorid=list_monitors.id;")
-	
-	#split'em up and put in an array
-	declare -i i=4
-	for x in ${all}
-	do
-		DB_XSERVER[${i}]=${x}
-		((i++))
-	done
-		
-# 	#now compare this stuff if they are equal
-# 	for ((i=0; i < 8; i++))
-# 	do
-# 		if [ "${DB_XSERVER[${i}]}" = "${LOCAL_XSERVER[${i}]}" ]
-# 		then
-# 			echo "${i}: ${DB_XSERVER[${i}]} == ${LOCAL_XSERVER[${i}]}"
-# 			
-# 			#delete equal stuff from DB_NETWORK
-# 			DB_XSERVER[${i}]="*NULL*"
-# 			
-# 		else
-# 			echo "${i}: ${DB_XSERVER[${i}]} != ${LOCAL_XSERVER[${i}]}"
-# 		fi
-# 	done
-# 	
-# 	
-# 	#update configs
-# 	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
-# 	#xserver general
-# 	declare -i i=0
-# 	for x in vga/vga \
-# 		vga/vgares \
-# 		vga/vgadepth \
-# 		mouse/mouse
-# 	do
-# 		#update only staff wich wasn't overwritten
-# 		if [ "${DB_XSERVER[${i}]}" != "*NULL*" ]
-# 		then
-# 			#create directory if not exist
-# 			if [ ! -d $(dirname ${SETTINGSPATH}/${x}) ] 
-# 			then
-# 				install -d $(dirname ${SETTINGSPATH}/${x})
-# 			fi
-# 			echo "${DB_XSERVER[${i}]}" > ${SETTINGSPATH}/${x}
-# 			#set update flag
-# 			ALX_XSERVER_SETUP=true
-# 		fi
-# 		((i++))
-# 	done
-# 	
-# 	#xserver monitors
-# 	if [ "${DB_XSERVER[4]}" != "*NULL*" \
-# 		-o "${DB_XSERVER[5]}" != "*NULL*" \
-# 		-o "${DB_XSERVER[6]}" != "*NULL*" \
-# 		-o "${DB_XSERVER[7]}" != "*NULL*" ]
-# 	then
-# 		if [ ! -d ${SETTINGSPATH}/monitor ]
-# 		then
-# 			install -d ${SETTINGSPATH}/monitor
-# 		fi
-# 		echo "myvendor=\"${DB_XSERVER[4]}\""	> ${SETTINGSPATH}/monitor/monitor
-# 		echo "mymodel=\"${DB_XSERVER[5]}\""	>> ${SETTINGSPATH}/monitor/monitor
-# 		echo "hsync=\"${DB_XSERVER[6]}\""	>> ${SETTINGSPATH}/monitor/monitor
-# 		echo "vref=\"${DB_XSERVER[7]}\""	>> ${SETTINGSPATH}/monitor/monitor
-# 		
-# 		#set update flag
-# 		ALX_XSERVER_SETUP=true
-# 	fi
-
-	# - damn fucking setup_xfree routine need to rewrite this fucking stuff -
-	# setup_xfree will only run
-	# if ${SETTINGS_TEMPLATE}/menu/vga/vga exist
-	# so we must *always* update *all* settings if something has changed
-
-	#now compare this stuff if they are equal
-	for ((i=0; i < 8; i++))
-	do
-		if [ "${DB_XSERVER[${i}]}" = "${LOCAL_XSERVER[${i}]}" ]
-		then
-			echo "${i}: ${DB_XSERVER[${i}]} == ${LOCAL_XSERVER[${i}]}"
-			
-			#delete equal stuff from DB_NETWORK
-			#DB_XSERVER[${i}]="*NULL*"
-			
-		else
-			echo "${i}: ${DB_XSERVER[${i}]} != ${LOCAL_XSERVER[${i}]}"
-		fi
-	done
 
-	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
-	if [ "${DB_XSERVER[0]}" != "*NULL*" \
-		-o "${DB_XSERVER[1]}" != "*NULL*" \
-		-o "${DB_XSERVER[2]}" != "*NULL*" \
-		-o "${DB_XSERVER[3]}" != "*NULL*" \
-		-o "${DB_XSERVER[4]}" != "*NULL*" \
-		-o "${DB_XSERVER[5]}" != "*NULL*" \
-		-o "${DB_XSERVER[6]}" != "*NULL*" \
-		-o "${DB_XSERVER[7]}" != "*NULL*" ]
+	# check if serial file exists
+	if [ -f /etc/alxconfig-ng/serial ] && [[ ${ALX_FORCED_RECHECK} = false ]]
 	then
-		[ ! -d ${SETTINGSPATH}/vga ] && install -d ${SETTINGSPATH}/vga
-		[ ! -d ${SETTINGSPATH}/mouse ] && install -d ${SETTINGSPATH}/mouse
-		[ ! -d ${SETTINGSPATH}/monitor ] && install -d ${SETTINGSPATH}/monitor
-		
-		echo "${DB_XSERVER[0]}" > ${SETTINGSPATH}/vga/vga
-		echo "${DB_XSERVER[1]}" > ${SETTINGSPATH}/vga/vgares
-		echo "${DB_XSERVER[2]}" > ${SETTINGSPATH}/vga/vgadepth
-		echo "${DB_XSERVER[3]}" > ${SETTINGSPATH}/mouse/mouse
-		
-		echo "myvendor=\"${DB_XSERVER[4]}\""	> ${SETTINGSPATH}/monitor/monitor
-		echo "mymodel=\"${DB_XSERVER[5]}\""	>> ${SETTINGSPATH}/monitor/monitor
-		echo "hsync=\"${DB_XSERVER[6]}\""	>> ${SETTINGSPATH}/monitor/monitor
-		echo "vref=\"${DB_XSERVER[7]}\""	>> ${SETTINGSPATH}/monitor/monitor
-		
-		#set update flag
-		ALX_XSERVER_SETUP=true
-	fi
-}
+		source /etc/alxconfig-ng/serial
 
+		# start preliminary networking (dhcp)
+		preliminary_network start
 
-validate_sessions(){
-	#source /opt/alx-config/Configurator/config_functions.sh
-
-	local x i all LOCAL_SESSIONS DB_SESSIONS SETTINGSPATH count
-	
-	#all arrays:
-	# ->  session1 session2 ... sessionN
-	
-	
-	#no LOCAL_SESSIONS here, needs bubblesort
-	
-	#get settings from database
-	all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
-			"select session from cfg_sessions where serial='${ALX_SERIAL}'")
-	
-	#split'em up and put in an array (only if $all not zero)
-	declare -i i=0
-	if [ -n "${all}" ]
-	then
-		for x in ${all}
-		do
-			DB_SESSIONS[${i}]=${x}
-			((i++))
-		done
-		count=${i}
-	else
-		count=0
-	fi
-	
-	## no compare here, can only done with bubblesort or s.th like that
-	# shows only the new sessions
-	declare -i i=0
-	#count=${#DB_SESSIONS[*]} #---> not working gets always 1, why ?
-	
-	echo "Number of new sessions: ${count}"
-	for ((i=0; i < count; i++))
-	do
-		echo "${i} - ${DB_SESSIONS[${i}]}"
-	done
-	
-	#update local configs
-	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
-	declare -i i=0
-	
-	#count=${#DB_SESSIONS[*]}
-	
-	if [ ${count} -gt 0 ]
-	then
-		#create directory if not exist
-		[ ! -d ${SETTINGSPATH}/sessions ] && install -d ${SETTINGSPATH}/sessions
-		
-		#delete old sessions
-		echo -n > ${SETTINGSPATH}/sessions/sessions
-		
-		for ((i=0; i < count; i++))
-		do
-			echo "${DB_SESSIONS[${i}]}" >> ${SETTINGSPATH}/sessions/sessions
-		done
-		
-		#set update flag
-		ALX_SESSION_SETUP=true
-	fi
-}
-
-
-validate_printing(){
-	#source /opt/alx-config/Configurator/config_functions.sh
-
-	local x i k all LOCAL_PRINTER DB_PRINTER SETTINGSPATH count
-	
-	#all arrays: [2 dimensions !]
-	# ->  name1 name2 ... nameN
-	# ->  name1 printingport ip share
-	
-	#later on, for now -> name1 port1 ip1 share1 name2 ....
-	# seperator is 4
-	
-	#local PRINTERNAME PRINTING IP SHARE
-	
-	# update *always* printers from database;
-	# compare with local settings cannot be done yet
-	
-	#get settings from database
-	all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
-			"select printer_name,
-				port,
-				ip,
-				share
-		from cfg_printers where serial='${ALX_SERIAL}'")
-	
-	#split'em up and put in an array
-	declare -i i=0
-	declare -i k=0
-	
-	if [ -n "${all}" ]
-	then
-		for x in ${all}
-		do
-			((k++))
-			DB_PRINTER[${i}]="${DB_PRINTER[${i}]} ${x}"
-			if [ ${k} -eq 4 ]
-			then
-				((i++))
-				#reset $k
-				declare -i k=0
-			fi
-		done
-		count=${i}
-	else
-		count=0
-	fi
-	
-	#echo settings
-	echo "Number of new printers: ${count}"
-	for ((i=0; i < count; i++))
-	do
-		echo "${i} printer:"
-		for x in ${DB_PRINTER[${i}]}
-		do
-			echo "    ${x}"
-		done
-	done
-	
-	#import settings (only if counter > 0)
-	local prnset
-	
-	#delete all printers (*always*)
-	if [ -d ${SETTINGS_TEMPLATE}/system/printing ]
-	then
-		SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
-		[ -d ${SETTINGSPATH}/delete ] && rm -rf ${SETTINGSPATH}/delete
-		install -d ${SETTINGSPATH}/delete
-		mv -f ${SETTINGS_TEMPLATE}/system/printing/* ${SETTINGSPATH}/delete
-		rm -rf ${SETTINGS_TEMPLATE}/system/printing
-		
-		#set update flag (*always*)
-		ALX_PRINTER_SETUP=true
-	fi
-	
-	if [ ${count} -gt 0 ]
-	then
-		SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
-		
-		[ ! -d ${SETTINGSPATH}/printing ] && install -d ${SETTINGSPATH}/printing
-		for ((i=0; i < count; i++))
-		do
-			declare -i k=0
-			for x in ${DB_PRINTER[${i}]}
-			do
-				prnset[${k}]=${x}
-				((k++))
-			done
-			
-			echo "PRINTERNAME=${prnset[0]}"	>  ${SETTINGSPATH}/printing/${prnset[0]}
-			echo "PRINTING=${prnset[1]}"	>> ${SETTINGSPATH}/printing/${prnset[0]}
-			echo "IP=${prnset[2]}"		>> ${SETTINGSPATH}/printing/${prnset[0]}
-			echo "SHARE=${prnset[3]}"	>> ${SETTINGSPATH}/printing/${prnset[0]}
-		done
-	
-		#set update flag (*always*)
-		ALX_PRINTER_SETUP=true
-	fi
-	
-}
-
-update_system_settings(){
-	source /opt/alx-config/Configurator/config_functions.sh
-
-	echo -e ${COLMAGENTA}"Checking system setup ..."${COLDEFAULT}
-	
-	echo
-	echo "network"
-	validate_networking
-	echo
-	echo "xserver"
-	validate_xserver
-	echo
-	echo "sessions"
-	validate_sessions
-	echo
-	#echo "printers"
-	#validate_printing
-	#echo
-	
-	if [ "${ALX_NETWORK_SETUP}" == "true" ]
-	then
-		echo -e ${COLMAGENTA}"Updating network settings"${COLDEFAULT}
-		setup_modules
-		setup_network
-	fi
-	
-	if [ "${ALX_XSERVER_SETUP}" == "true" ]
-	then
-		echo -e ${COLMAGENTA}"Updating xserver settings"${COLDEFAULT}
-		setup_xfree
-	fi
-	
-	if [ "${ALX_SESSION_SETUP}" == "true" ]
-	then
-		echo -e ${COLMAGENTA}"Updating session settings"${COLDEFAULT}
-		setup_sessions
-	fi
-	
-	#if [ "${ALX_PRINTER_SETUP}" == "true" ]
-	#then
-	#	echo -e ${COLMAGENTA}"Updating printer settings"${COLDEFAULT}
-	#	setup_printers
-	#fi
-	
-	#clean up temp files
-	local SETTINGSPATH
-	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
-	#[ -d ${SETTINGSPATH} ] && rm -rf ${SETTINGSPATH}
-}
+		# check if mysql server is reachable
+		# if not abort this script
+		if ! reach_mysql_server
+		then
+			preliminary_network stop
+			exit 1
+		fi
 
-get_system_serial(){
+		CUR_IP=$(ifconfig ${ALX_IFACE} | sed -n '/addr:/s/ [^r]*..//gp')
+		CUR_MAC=$(ifconfig ${ALX_IFACE} | grep HWaddr | cut -d ' ' -f11)
+		CUR_MTIME=$(date +%s)
 
-	local CUR_IP CUR_MAC CUR_MTIME
+		rc_print "Trying to validate my serial ..."
 
-	#check if serial file exists
-	if [ -f /etc/alx-config/serial ]
-	then
-		source /etc/alx-config/serial
-		
-		# if system is already configured, it *has* a hostname.
-		# so we take the hostname of this system here
-		source /etc/hostname
-		
-		#start preliminary networking (dhcp)	
-		preliminary_network start
-		
-		CUR_IP=$(/sbin/ifconfig eth0 | sed -n '/addr:/s/ [^r]*..//gp')
-		CUR_MAC=$(/sbin/ifconfig eth0 | grep HWaddr | cut -d ' ' -f11)
-		CUR_MTIME=$(date +%s)
-		
-		echo -e ${COLOREDSTAR} "Trying to validate my serial ..."
-		
-		#nice serial output
+		# nice serial output
 		$CURS_UP
 		$SET_WCOL
 		echo "[ SN: ${ALX_SERIAL} ]"
-		
-# 		#is this system outdated ?
-# 		#MY_HOSTNAME=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
-# 		#	"select hostname from cfg_serial where id='${ALX_SERIAL}'")
-# 		
-# 		#we do this now with the date instead of the hostname
-# 		local MY_ALX_REG_DATE
-# 		MY_ALX_REG_DATE=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
-# 			"select mtime from client_serial where serial='${ALX_SERIAL}'")
-# 		
-# 		#if [ "${MY_HOSTNAME}" == "${HOSTNAME}" ]
-# 		if [ "${MY_ALX_REG_DATE}" == "${ALX_REG_DATE}" ]
-# 		then
-# 			#set ALX_STATE to ok so everybody that everything was ok
-# 			ALX_STATE=ok
-# 			
-# 			evaluate_retval
-# 		else
-# 			#print false (works only if this is the first statement here)
-# 			evaluate_retval
-# 			
-# 			#set ALX_STATE to error so everybody sees there was an error
-# 			ALX_STATE=error
-# 		fi
 
 		if validate_serial "${ALX_SERIAL}" "${ALX_REG_DATE}" "${CUR_MAC}"
 		then
 			ALX_STATE="ok"
 		else
+			# abort on non valid serial
 			ALX_STATE="invalid serial"
+			echo "ALX_STATE=\"${ALX_STATE}\"" > /etc/alxconfig-ng/state/state
+			show_invalid_serial_msg
+			exit 1
 		fi
 
 	else
-		#run hardware detection
+		# run hardware detection
 		echo
-		echo -e ${COLMAGENTA}"Preparing system for first boot"${COLDEFAULT}
+		if [[ ${ALX_FORCED_RECHECK} = true ]]
+		then
+			rc_mecho "Hardware autodetection forced by system-administrator"
+			# always disable CONFD_NETWORKING here
+			export ALX_CONFD_NETWORKING="false"
+		else
+			rc_mecho "Preparing system for first boot"
+		fi
 		ALX_HW_DETECT=true
-		/etc/init.d/hwdetect start
-		
-		#set hostname to alx_default_hostname
+		hwsetup
+
+		# set hostname to alx_default_hostname
+		# use old hostname if this is a forced re-check
+		[[ ${ALX_FORCED_RECHECK} = true ]] && ALX_DEFAULT_HOSTNAME="$(< /etc/hostname)"
 		[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx
 		HOSTNAME="${ALX_DEFAULT_HOSTNAME}"
-		
-		#update the hostname on the system for sure
-		echo "HOSTNAME=${HOSTNAME}" > /etc/hostname
-		
-		#start preliminary networking (dhcp)
+
+		# update the hostname on the system for sure
+		echo "${HOSTNAME}" > /etc/hostname
+
+		# start preliminary networking (dhcp)
 		preliminary_network start
-		
+
+		# check if mysql server is reachable
+		# if not abort this script
+		if ! reach_mysql_server
+		then
+			preliminary_network stop
+			exit 1
+		fi
+
+
 		CUR_IP=$(/sbin/ifconfig eth0 | sed -n '/addr:/s/ [^r]*..//gp')
 		CUR_MAC=$(/sbin/ifconfig eth0 | grep HWaddr | cut -d ' ' -f11)
 		CUR_MTIME=$(date +%s)
-		
-		echo -e ${COLOREDSTAR} "Trying to get new serial ..."
-		
-		#request new serial
-		#ALX_REG_DATE="$(date +%F)"
-		
-		#we're using the mtime now (better for vaildating the serial)
-		mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
-			"insert into client_serials(
-				mtime,
-				mac
-			) 
-			values(
-				'${CUR_MTIME}',
-				'${CUR_MAC}'
-			);"
-			
-		#then validate and retrieve serial
-		
-		### warning must be changed that only the LAST ID will be fetched,  ###
-		### or you get error if the computer name and date are the same     ###
-		### you have more then one serial number than                       ###
-		
-		#not 100% working may get more than *one* id
-		#ALX_SERIAL=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
-		#	"select id from cfg_serial where datum='${ALX_REG_DATE}' and hostname='${HOSTNAME}'")
-		
-		#select highest id only (added max)
-		ALX_SERIAL=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
-			"select max(serial) from client_serials where mtime='${CUR_MTIME}' and mac='${CUR_MAC}'")
 
-		if [ "${ALX_SERIAL}" != NULL ]
+		# abort now if this is a forced re-check
+		if [[ ${ALX_FORCED_RECHECK} = true ]]
 		then
-			#nice serial output
+			# but first check the serial
+			source /etc/alxconfig-ng/serial
+
+			rc_print "Trying to validate my serial ..."
+
+			# nice serial output
 			$CURS_UP
 			$SET_WCOL
 			echo "[ SN: ${ALX_SERIAL} ]"
-		
-			#set ALX_STATE to ok so everybody that everything was ok
+
+			if validate_serial "${ALX_SERIAL}" "${ALX_REG_DATE}" "${CUR_MAC}"
+			then
+				ALX_STATE="ok"
+			else
+				# abort on non valid serial
+				ALX_STATE="invalid serial"
+				echo "ALX_STATE=${ALX_STATE}" > /etc/alxconfig-ng/state/state
+				show_invalid_serial_msg
+				exit 1
+			fi
+
+			# write current state to temp file
+			echo "ALX_STATE=\"${ALX_STATE}\"" > /etc/alxconfig-ng/state/state
+			[ -f /hardware-auto-detection ] && rm /hardware-auto-detection
+
+			# now export ALX_FORCED_RECHECK=true
+			# that the setting will be updated not inserted !
+			export ALX_FORCED_RECHECK=true
+			return 0
+		fi
+
+		rc_print "Trying to get new serial ..."
+
+		# request a new serial; one command now (cause must be done in the same session)
+		ALX_SERIAL=$(mysqldo "insert into client_serials (mtime, mac) values('${CUR_MTIME}','${CUR_MAC}');
+			select last_insert_id();")
+
+		if [[ ${ALX_SERIAL} != NULL ]]
+		then
+			# nice serial output
+			$CURS_UP
+			$SET_WCOL
+			echo "[ SN: ${ALX_SERIAL} ]"
+
+			# set ALX_STATE to ok so everybody knows that everything was ok
 			ALX_STATE=ok
-			
-			echo "ALX_SERIAL=${ALX_SERIAL}" > /etc/alx-config/serial
-			echo "ALX_REG_DATE=${CUR_MTIME}" >> /etc/alx-config/serial
-			
+
+			echo "ALX_SERIAL=\"${ALX_SERIAL}\"" > /etc/alxconfig-ng/serial
+			echo "ALX_REG_DATE=\"${CUR_MTIME}\"" >> /etc/alxconfig-ng/serial
+
 			evaluate_retval
 		else
-			#print false (works only if this is the first statement here)
+			# print false (works only if this is the first statement here)
 			evaluate_retval
-			
-			#set ALX_STATE to error so everybody sees there was an error
+
+			# set ALX_STATE to error so everybody sees there was an error
 			ALX_STATE=error
-			
-			#show an error that no new serial was found
-			#nice serial output
+
+			# show an error that no new serial was found
+			# nice serial output
 			$CURS_UP
 			$SET_WCOL
 			echo -e "[ SN: ${COLRED}None, 0${COLDEFAULT} ]"
 		fi
 	fi
-	
-	#write current state to temp file
-	echo "ALX_STATE=${ALX_STATE}" > /etc/alx-config/state/state
+
+	# write current state to temp file
+	echo "ALX_STATE=\"${ALX_STATE}\"" > /etc/alxconfig-ng/state/state
+	echo "ALX_IFACE=\"${ALX_IFACE}\"" >> /etc/alxconfig-ng/state/state
 }
 
 
-check_is_configured() {
-	if [ -f /etc/alx-config/state/configured ]
+check_is_configured()
+{
+	if [ -f /etc/alxconfig-ng/state/configured ]
 	then
 		export ALX_CONFIGURED=true
 	else
@@ -927,228 +256,635 @@
 
 
 # imports current settings to the database resolved by the hardware detection
-import_settings_to_db() {
-	#note: networking is always 'dhcp' if hw was autodetected
-	#note: default_domain/hostname is set in config.rc
-	
-	#to be safe, we do some sanity checks
+import_settings_to_db()
+{
+	# note: networking is always 'dhcp' if hw was autodetected
+	# note: default_domain/hostname is set in config.rc
+
+	# to be safe, we do some sanity checks
 	[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain
 	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx
-	
-	#vars used by hwdetect
+
+	# vars used by hwsetup
 	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
 	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
 	local MOUSETYPE XMOUSETYPE FULLNAME DEVICE
-	
-	#get setting from hwdetect
-	source /etc/sysconfig/hwsetup/knoppix
-	source /etc/sysconfig/hwsetup/mouse
-	
+
+	# get setting from hwsetup
+	source /etc/conf.d/hwsetup/knoppix
+	source /etc/conf.d/hwsetup/mouse
+
 	echo
-	echo -e ${COLMAGENTA}"Importing detected settings to database"${COLDEFAULT}
-	
-	#network
-	echo -e "      Network settings ..."
-	mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
-		"insert into cfg_network(
-			hostname,
-			serial,
-			module,
-			domain,
-			networking
-		)
-		values(
-			'${ALX_DEFAULT_HOSTNAME}',
-			'${ALX_SERIAL}',
-			'${NETCARD_DRIVER}',
-			'${ALX_DEFAULT_DOMAIN}',
-			'dhcp'
-		);"
+	rc_mecho "Importing detected settings to database"
+
+	# network
+	rc_mecho "      Network settings ..."
+	if [[ ${ALX_CONFD_NETWORKING} = true ]]
+	then
+		# get settings
+		for iface in $(onboot_interface_list ${network_settings}/net.*)
+		do
+			[[ $(< ${SETTINGSPATH}/confd-networking) != ${iface} ]] && continue
+			rc_echo "WARNING: only importing settings for interface [ ${iface} ] !"
+			source ${network_settings}/net.${iface} || echo "Error: could not read '${network_settings}/net.${iface}'"
+			NETCARD_DRIVER="$(cat /etc/modprobe.d/net.${iface}.conf | cut -d' ' -f3)"
+
+			mysqldo "insert into cfg_network(
+				hostname,
+				serial,
+				module,
+				domain,
+				networking,
+				netmask,
+				dns,
+				gateway,
+				broadcast,
+				ip,
+				forcemacto,
+				wireless_bitrate,
+				wireless_channel,
+				wireless_essid,
+				wireless_frequency,
+				wireless_mode,
+				wireless_nick,
+				wireless_auth_mode,
+				wireless_key_length,
+				wireless_key,
+				wireless_key_ascii
+			)
+			values(
+				'${ALX_DEFAULT_HOSTNAME}',
+				'${ALX_SERIAL}',
+				'${NETCARD_DRIVER}',
+				'${ALX_DEFAULT_DOMAIN}',
+				'${NETWORKING}',
+				'${NETMASK}',
+				'${NAMESERVER}',
+				'${GATEWAY}',
+				'${BROADCAST}',
+				'${IP}',
+				'${FORCE_MAC_TO}',
+				'${WIRELESS_BITRATE}',
+				'${WIRELESS_CHANNEL}',
+				'${WIRELESS_ESSID}',
+				'${WIRELESS_FREQUENCY}',
+				'${WIRELESS_MODE}',
+				'${WIRELESS_NICK}',
+				'${WIRELESS_AUTH_MODE}',
+				'${WIRELESS_KEY_LENGTH}',
+				'${WIRELESS_KEY}',
+				'${WIRELESS_KEY_ASCII}'
+			);"
+
+			# only insert the *FIRST* iface
+			break
+		done
+	else
+		mysqldo "insert into cfg_network(
+				hostname,
+				serial,
+				module,
+				domain,
+				networking
+			)
+			values(
+				'${ALX_DEFAULT_HOSTNAME}',
+				'${ALX_SERIAL}',
+				'${NETCARD_DRIVER}',
+				'${ALX_DEFAULT_DOMAIN}',
+				'dhcp'
+			);"
+	fi
 	evaluate_retval
-	
-	#xserver
-	echo -e "      Graphic settings ..."
-	#xserver general
-	( mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
-		"insert into cfg_graphic(
+
+	# xserver
+	rc_mecho "      Graphic settings ..."
+	# xserver general
+	( mysqldo "insert into cfg_graphic(
 			serial,
 			module,
 			resolution,
-			depth
+			depth,
+			refresh_rate
 		)
 		values(
 			'${ALX_SERIAL}',
 			'${XMODULE}',
 			'1024x768',
-			'16'
-		);";
-	#xserver monitor
-	  mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
-		"insert into cfg_monitor(
+			'16',
+			'60'
+		);"; )
+	evaluate_retval
+
+	# input
+	rc_mecho "      Input settings ..."
+	mysqldo "insert into cfg_input(serial,mouse) values('${ALX_SERIAL}','${XMOUSETYPE}');"
+	evaluate_retval
+
+	# auth
+	rc_mecho "      Authentification settings ..."
+	mysqldo "insert into client_auth(
 			serial,
-			vendor,
-			model,
-			hsync,
-			vrefresh
+			username,
+			shell,
+			vnc,
+			samba,
+			station
 		)
 		values(
 			'${ALX_SERIAL}',
-			'Aamazing',
-			'CM-1528-FS',
-			'28-64',
-			'47-104'
-		);";
-		
-	# input
-	  mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
-			"insert into cfg_input(serial,mouse) values('${ALX_SERIAL}','${XMOUSETYPE}');";)
+			'${ALX_UNPRIV_USER}',
+			'',
+			'',
+			'',
+			''
+		);"
+	evaluate_retval
+
+	# exchange ssh rsa keys - the first boot needs this !
+	# or no reboot will work via the webadmin
+	rc_mecho "      SSH authentification settings ..."
+	HOME=/root config_ssh_auth
+	evaluate_retval
+
+	# autostart
+	rc_mecho "      Autostart settings ..."
+	mysqldo "insert into cfg_autostart(serial,session) values('${ALX_SERIAL}','');"
+
+	# screensaver
+	rc_mecho "      Screensaver settings ..."
+	mysqldo "insert into cfg_screensaver(serial,screensaver) values('${ALX_SERIAL}','')"
+
+	# version info
+	rc_mecho "      OS version info ..."
+	local alx_os
+	local alx_utils
+	alx_os="$(< /etc/mageversion)"
+	alx_utils="$(magequery -n alxconfig-ng-alx | sed 's:.*\[\ \(.*\)\ \].*:\1:')"
+	alx_utils="${alx_utils/alxconfig-ng-alx-}"
+	mysqldo "insert into client_version(serial,os,utils) values('${ALX_SERIAL}','${alx_os}','${alx_utils}')"
+
 	evaluate_retval
 }
 
-# imports current settings to the local system resolved by the hardware detection
-import_settings_local(){
-	#note: networking is always 'dhcp' if hw was autodetected
-	#note: default_domain/hostname is set in config.rc
-	
-	#to be safe, we do some sanity checks
+# imports current settings to the database resolved by the hardware detection
+update_settings_in_db()
+{
+	# note: networking is always 'dhcp' if hw was autodetected
+	# note: default_domain/hostname is set in config.rc or exported
+	# note: we updating only hardware settings here !
+
+	# to be safe, we do some sanity checks
 	[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain
 	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx
-	
-	#vars used by hwdetect
+
+	# vars used by hwsetup
 	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
 	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
 	local MOUSETYPE XMOUSETYPE FULLNAME DEVICE
 
-	
-	#get setting from hwdetect
-	source /etc/sysconfig/hwsetup/knoppix
-	source /etc/sysconfig/hwsetup/mouse
-	
+	# get setting from hwsetup
+	source /etc/conf.d/hwsetup/knoppix
+	source /etc/conf.d/hwsetup/mouse
+
 	echo
-	echo -e ${COLMAGENTA}"Importing detected settings to local system"${COLDEFAULT}
+	rc_mecho "Updating detected settings in database"
 
-	
-	#allready configured, no update needed so we put it to system
-	SETTINGSPATH=${SETTINGS_TEMPLATE}/system
-	
-	
-	#network
-	echo -e "      Network settings ..."
+	# network
+	rc_mecho "      Network settings ..."
+	if [[ ${ALX_CONFD_NETWORKING} = true ]]
+	then
+		# get settings
+		#source ${rc_base}/init.d/network &> /dev/null
+		for iface in $(onboot_interface_list ${network_settings}/net.*)
+		do
+			[[ $(< ${SETTINGSPATH}/confd-networking) != ${iface} ]] && continue
+			rc_echo "WARNING: only importing settings for interface [ ${iface} ] !"
+			source ${network_settings}/net.${iface} || exit 1
+			NETCARD_DRIVER="$(cat /etc/modprobe.d/net.${iface}.conf | cut -d' ' -f3)"
+
+			mysqldo "update cfg_network set
+					hostname='${ALX_DEFAULT_HOSTNAME}',
+					module='${NETCARD_DRIVER}',
+					domain='${ALX_DEFAULT_DOMAIN}',
+					networking='${NETWORKING}',
+					netmask='${NETMASK}',
+					dns='${NAMESERVER}',
+					gateway='${GATEWAY}',
+					broadcast='${BROADCAST}',
+					ip='${IP}',
+					forcemacto='${FORCE_MAC_TO}',
+					wireless_bitrate='${WIRELESS_BITRATE}',
+					wireless_channel='${WIRELESS_CHANNEL}',
+					wireless_essid='${WIRELESS_ESSID}',
+					wireless_frequency='${WIRELESS_FREQUENCY}',
+					wireless_mode='${WIRELESS_MODE}',
+					wireless_nick='${WIRELESS_NICK}',
+					wireless_auth_mode='${WIRELESS_AUTH_MODE}',
+					wireless_key_length='${WIRELESS_KEY_LENGTH}',
+					wireless_key='${WIRELESS_KEY}',
+					wireless_key_ascii='${WIRELESS_KEY_ASCII}'
+				where serial=${ALX_SERIAL};"
 
-	[ ! -d ${SETTINGSPATH}/modules ] && install -d ${SETTINGSPATH}/modules
-	echo "${NETCARD_DRIVER}" > ${SETTINGSPATH}/modules/modules
-	
-	[ ! -d ${SETTINGSPATH}/network ] && install -d ${SETTINGSPATH}/network
-	( echo "${ALX_DEFAULT_HOSTNAME}"	> ${SETTINGSPATH}/network/hostname;
-	  echo "${ALX_DEFAULT_DOMAIN}"	> ${SETTINGSPATH}/network/domain;
-	  echo "dhcp"			> ${SETTINGSPATH}/network/networking )
+			# only insert the *FIRST* iface
+			break
+		done
+	else
+		mysqldo "update cfg_network set
+				hostname='${ALX_DEFAULT_HOSTNAME}',
+				module='${NETCARD_DRIVER}',
+				domain='${ALX_DEFAULT_DOMAIN}',
+				networking='dhcp'
+			where serial=${ALX_SERIAL};"
+	fi
 	evaluate_retval
-	
-	
-	#xserver
-	echo -e "      Graphic settings ..."
-	
-	[ ! -d ${SETTINGSPATH}/vga ] && install -d ${SETTINGSPATH}/vga
-	[ ! -d ${SETTINGSPATH}/mouse ] && install -d ${SETTINGSPATH}/mouse
-	[ ! -d ${SETTINGSPATH}/monitor ] && install -d ${SETTINGSPATH}/monitor
-	( echo "${XMODULE}"		> ${SETTINGSPATH}/vga/vga;
-	  echo "16"			> ${SETTINGSPATH}/vga/vgadepth;
-	  echo "1024x768"		> ${SETTINGSPATH}/vga/vgares;
-	  echo "${XMOUSETYPE}"		> ${SETTINGSPATH}/mouse/mouse;
-	  echo "myvendor=\"Aamazing\""	> ${SETTINGSPATH}/monitor/monitor;
-	  echo "mymodel=\"CM-1528-FS\""	>> ${SETTINGSPATH}/monitor/monitor;
-	  echo "hsync=\"28-64\""	>> ${SETTINGSPATH}/monitor/monitor;
-	  echo "vref=\"47-104\""	>> ${SETTINGSPATH}/monitor/monitor;)
+
+	# xserver
+	rc_mecho "      Graphic settings ..."
+	# xserver general
+	mysqldo "update cfg_graphic set
+			module='${XMODULE}',
+			resolution='1024x768',
+			depth='16',
+			refresh_rate='60'
+		where serial=${ALX_SERIAL};"
 	evaluate_retval
-	
-	#set system state to 'already configured'
-	touch /etc/alx-config/state/configured
+
+	# input
+	rc_mecho "      Input settings ..."
+	mysqldo "update cfg_input set mouse='${XMOUSETYPE}' where serial=${ALX_SERIAL};"
+	evaluate_retval
+
+	# version info
+	rc_mecho "      OS version info ..."
+	local alx_os
+	local alx_utils
+	alx_os="$(< /etc/mageversion)"
+	alx_utils="$(magequery -n alxconfig-ng-alx | sed 's:.*\[\ \(.*\)\ \].*:\1:')"
+	alx_utils="${alx_utils/alxconfig-ng-alx-}"
+	mysqldo "update client_version set os='${alx_os}', utils='${alx_utils}' where serial=${ALX_SERIAL};"
 }
 
-#start|stop
-preliminary_network(){
+# imports current settings to the local system resolved by the hardware detection
+# we only need the network settings
+import_settings_local()
+{
+	# note: networking is always 'dhcp' if hw was autodetected
+	# note: default_domain/hostname is set in config.rc
+
+	# to be safe, we do some sanity checks
+	[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain
+	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx
+
+	# vars used by hwsetup
+	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
+	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
+	local MOUSETYPE XMOUSETYPE FULLNAME DEVICE
+
+	# get setting from hwsetup
+	source /etc/conf.d/hwsetup/knoppix
+
+	echo
+	rc_mecho "Importing detected settings to local system"
+
+	if [[ ${ALX_CONFD_NETWORKING} = false ]]
+	then
+		# set an device alias for modprobe.conf
+		[ ! -d /etc/modprobe.d ] && install -d /etc/modprobe.d
+		echo "alias eth0 ${NETCARD_DRIVER}" > /etc/modprobe.d/net.eth0.conf
+
+		# regenerate modprobe.conf
+		[ -x $(which modules-update) ] && modules-update || rc_echo "modules-update not found!"
+		evaluate_retval
+	fi
+
+	# set system state to 'already configured'
+	touch /etc/alxconfig-ng/state/configured
+
+	# install slim desktopmanager configuration
+	config_display_manager
+
+	# if only an recheck was forced than abort now
+	[[ ${ALX_FORCED_RECHECK} = true ]] && return 0
+
+	# create a fresh fluxbox directory
+	[ -d ${ALX_UNPRIV_HOME}/.fluxbox ] && rm -rf ${ALX_UNPRIV_HOME}/.fluxbox
+	install -d ${ALX_UNPRIV_HOME}/.fluxbox
+
+	# now generate fluxbox config files
+
+	# fluxbox main config
+	cat ${ALX_SKELETONS}/fluxbox/init > ${ALX_UNPRIV_HOME}/.fluxbox/init
+
+	# fluxbox autostart
+	cat ${ALX_SKELETONS}/fluxbox/apps > ${ALX_UNPRIV_HOME}/.fluxbox/apps
+
+	# fluxbox menu header
+	cat ${ALX_SKELETONS}/fluxbox/menu.header > ${ALX_UNPRIV_HOME}/.fluxbox/menu
+
+	# now fix it with proper messages :P
+	local ver="$(< /etc/mageversion)"
+	sed -i "s:@CHANGEME@:alx-${ver}  #${ALX_SERIAL}:g" ${ALX_UNPRIV_HOME}/.fluxbox/menu
+
+	# add a newline (maybe there is no crlf in the header)
+	echo >> ${ALX_UNPRIV_HOME}/.fluxbox/menu
+
+	# fluxbox menu footer
+	cat ${ALX_SKELETONS}/fluxbox/menu.footer >> ${ALX_UNPRIV_HOME}/.fluxbox/menu
+
+	# add a newline (maybe there is no crlf in the footer)
+	echo >> ${ALX_UNPRIV_HOME}/.fluxbox/menu
+
+	# setup some standart icons (sysinfo.lnk)
+	# clean desktop icon location
+	[ -d ${ALX_UNPRIV_HOME}/.idesktop ] && rm -rf ${ALX_UNPRIV_HOME}/.idesktop
+	install -d ${ALX_UNPRIV_HOME}/.idesktop
+
+	# last but not least gen a icon with some sys informations
+	local sysinfo
+	local osversion
+	local xres
+	local yres
+
+	osversion="$(< /etc/mageversion)"
+	sysinfo="Hostname: ${ALX_DEFAULT_HOSTNAME} Serial: #${ALX_SERIAL} OS: alx-${osversion} Kernel: $(uname -r)"
+
+	# at first boot we got always a resolution of 1024x768-16@60
+	# middle of the screen
+	# (no txt - length required, xtdesk manage that itself)
+	xres="$((1024 / 2))"
+	# default y pos (full yres -22 !)
+	yres="$((768 - 22 ))"
+
+	generate_icon \
+		--name "${sysinfo}" \
+		--command "exit 0" \
+		--icon "${ALX_SESSIONS_ICONS}/sysinfo.png" \
+		--dest "${ALX_UNPRIV_HOME}/.idesktop/sysinfo.lnk" \
+		--xres "${xres}" \
+		--yres "${yres}" \
+		--icon-width "1" \
+		--icon-height "1"
+
+	# set correct permissions
+	chown ${ALX_UNPRIV_USER}:${ALX_UNPRIV_GROUP} ${ALX_UNPRIV_HOME}
+	chown ${ALX_UNPRIV_USER}:${ALX_UNPRIV_GROUP} ${ALX_UNPRIV_HOME}/.fluxbox
+	chmod 0755 ${ALX_UNPRIV_HOME}/.fluxbox
+	chmod 0755 ${ALX_UNPRIV_HOME}/.idesktop
+	chmod 0644 ${ALX_UNPRIV_HOME}/.ideskrc
+}
+
+# start|stop
+preliminary_network()
+{
 	local module
-	
-	if [ -f /etc/alx-config/state/configured ]
+
+	if [ -f /etc/alxconfig-ng/state/configured ]
 	then
-		#get module name
-		module=$(cat ${SETTINGS_TEMPLATE}/system/modules/modules)
-		modprobe ${module}
+		# compat for old clients
+		if [ -f ${SETTINGSPATH}/modules ]
+		then
+			# get module name
+			module=$(cat ${SETTINGSPATH}/modules)
+			modprobe ${module}
+		fi
+
 	else
-		#vars used by hwdetect
+		# vars used by hwsetup
 		local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
 		local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
-	
-		#get setting from hwdetect
-		source /etc/sysconfig/hwsetup/knoppix
+
+		# get setting from hwsetup
+		source /etc/conf.d/hwsetup/knoppix
 		modprobe ${NETCARD_DRIVER}
 	fi
-	
+
 	case $1 in
 		start)
 			# keeping like always safe:
 			# no network should be startet here,
 			# so we can delete all pid files if one exists
-			if ps -A|grep dhcpcd > /dev/null
+			if [[ ! -z $(pidof $(basename ${ALX_DHCP_PROG})) ]]
 			then
-				echo -e ${COLMAGENTA}"Forcing network down"${COLDEFAULT}
-				dhcpcd -k
+				rc_mecho "Forcing network down"
+				killall $(basename ${ALX_DHCP_PROG}) &> /dev/null
 				sleep 1
+			fi
+			[[ ${ALX_CONFD_NETWORKING} = true ]] && ${rc_base}/init.d/network stop
+
+			rc_mecho "Starting preliminary networking ... "
+
+			# start network configured from /etc/conf.d
+			if [[ ${ALX_CONFD_NETWORKING} = true ]]
+			then
+				${rc_base}/init.d/network start
 			else
-				rm -f /var/run/dhcpcd-eth?.pid
+				rc_print "Starting default dhcp based networking ... "
+				${ALX_DHCP_PROG} ${ALX_DHCP_START} &> /dev/null
+				evaluate_retval
 			fi
-			
-			echo -e ${COLMAGENTA}"Starting preliminary network ... "${COLDEFAULT}
-			#dhcpcd &> /dev/null #&& echo "ok" || echo "false"
-			
-			# aka_fix ########################################
-			ifconfig eth0 128.20.222.222 netmask 255.255.0.0 up
-			route del default gw 128.20.50.13 &> /dev/null
-			route add default gw 128.20.50.21 &> /dev/null
-			echo "nameserver 128.20.50.21" > /etc/resolv.conf
-			##################################################
-			evaluate_retval
 			;;
+
 		stop)
-			echo -e ${COLMAGENTA}"Stopping preliminary network ... "${COLDEFAULT}
-			ifconfig eth0 down
-			if ps -A|grep dhcpcd > /dev/null
+			rc_mecho "Stopping preliminary networking ... "
+			if [[ ${ALX_CONFD_NETWORKING} = true ]]
+			then
+				${rc_base}/init.d/network stop
+			else
+				rc_print "Stopping default dhcp based networking ... "
+				ifconfig ${ALX_IFACE} down
+			fi
+			if [[ ! -z $(pidof $(basename ${ALX_DHCP_PROG})) ]]
 			then
-				#echo -en ${COLMAGENTA}"Stopping preliminary network ... "${COLDEFAULT}
-				dhcpcd -z  &> /dev/null
+				killall $(basename ${ALX_DHCP_PROG}) &> /dev/null
+				sleep 1
 			fi
 			evaluate_retval
 			;;
+
 		*)
 			echo "Usage: preliminary_network {start|stop}"
 			;;
 	esac
 }
 
+reset_system_settings()
+{
+	# force load of de kbdkeys
+	loadkeys -q de
+	rc_echo
+	rc_echo -en ${COLRED}
+	rc_echo -n "*** Warning: you are about to reset *all* local settings on this system!"
+	rc_echo -e ${COLDEFAULT}
+	rc_echo "*** Do you really want to continue ?"
+	rc_echo -n "*** Enter 'yes' to continue, anything else to abort: "
+	read kbinsert
+	if [[ ${kbinsert} = yes ]]
+	then
+		rc_echo -en ${COLRED}
+		rc_echo -n "*** OK, you really want it ... killing all settings: "
+		for i in 3 2 1 now
+		do
+			rc_echo -n " ${i}"
+			sleep 1
+		done
+		rc_echo -e ${COLDEFAULT}
+
+		## reset all settings:
+		rm -rf ${SETTINGSPATH}/*
+		rm -f /etc/alxconfig-ng/serial
+		rm -rf /etc/alxconfig-ng/state
+
+		# clear all printers & net-shares
+		:> /etc/printcap
+
+		# remove lprng
+		rc-config del lprng &> /dev/null
+
+		# remove all user settings
+		[ -d ${ALX_UNPRIV_HOME} ] && rm -rf ${ALX_UNPRIV_HOME}
+
+		# remove all ica-sessions
+		find ${ALX_ICA_SESSIONS} -type f -name '*.ica' | xargs rm
+
+		# remove all old nics and modules configs
+		find /etc/conf.d -type f -name 'net.*' | xargs rm
+		find /etc/modprobe.d -type f -name 'net.*' | xargs rm
+
+		# restore default networking
+		cat ${ALX_SKELETONS}/net/net.eth0 > /etc/conf.d/net.eth0
+
+		rc_echo "I am done now, press [Enter] to reboot system ..."
+	else
+		rc_echo "Aborted, press [Enter] to reboot system ..."
+	fi
+	read
+	reboot
+}
+
+onboot_interface_list()
+{
+	local file
+	local devices
+	local iface
+
+	# get list of all devices
+	for file in $@
+	do
+		if [[ $(read_value ONBOOT ${file}) = yes ]]
+		then
+			iface="$(basename ${file} | sed s/net.//)"
+			# exclude backup files
+			case "${iface}" in
+				*~) ;;
+				*) devices="${devices} $(basename ${file} | sed s/net.//)" ;;
+			esac
+		fi
+	done
+
+	echo "${devices}"
+}
+
+# read values from net.* files
+read_value()
+{
+	local var="$1"
+	local file="$2"
+	local value
+
+	# local all possible vars
+	# global
+	local ONBOOT
+	local NETWORKING
+	
+	# static
+	local IP
+	local NETMASK
+	local BROADCAST
+	local NETWORKING
+	local FORCE_MAC_TO
+
+	# dhcp
+	local DHCP_PROG
+	local DHCP_START
+	local DHCP_STOP
+
+	# default gw
+	local GATEWAY
+	local GATEWAY_IF
+
+	# wireless extensions
+	local WIRELESS_AP
+	local WIRELESS_AUTH_MODE
+	local WIRELESS_BITRATE
+	local WIRELESS_CHANNEL
+	local WIRELESS_DEFAULT_KEY
+	local WIRELESS_ESSID
+	local WIRELESS_FREQUENCY
+	local WIRELESS_KEY
+	local WIRELESS_KEY_ASCII
+	local WIRELESS_KEY_0
+	local WIRELESS_KEY_1
+	local WIRELESS_KEY_2
+	local WIRELESS_KEY_3
+	local WIRELESS_KEY_LENGTH
+	local WIRELESS_MODE
+	local WIRELESS_NICK
+	local WIRELESS_NWID
+	local WIRELESS_POWER
+
+	source ${file}
+	eval value=\$$(echo ${var})
+	echo "${value}"
+}
+
 case $1 in
 	start)
-		#retrieve or validate current serial
+		# check for global overrides
+		[ -f ${SETTINGSPATH}/confd-networking ] && ALX_CONFD_NETWORKING=true
+		[ -f /hardware-auto-detection ] && ALX_FORCED_RECHECK=true
+		read_cmdline hardware-auto-detection && ALX_FORCED_RECHECK=true
+		read_cmdline alx-reset-settings && ALX_RESET_SETTINGS=true
+
+		# kill all settings if requested
+		if [[ ${ALX_RESET_SETTINGS} = true ]]
+		then
+			reset_system_settings
+		fi
+
+		# retrieve or validate current serial
 		get_system_serial
-		if [ "${ALX_HW_DETECT}" == "true" ]
+		if [[ ${ALX_HW_DETECT} = true ]]
 		then
-			import_settings_to_db
+			if [[ ${ALX_FORCED_RECHECK} = true ]]
+			then
+				update_settings_in_db
+			else
+				import_settings_to_db
+			fi
 			import_settings_local
+
+			# here we should also exchange the ssh keys
+			# or the system cannot be rebooted after
+			# the first start via the alx-webadmin
+			config_ssh_auth
 		fi
-		
-		#now setup system configuration
-		#alx_setup_or_whatever_it_will_be_called()
-		[ "${ALX_HW_DETECT}" == "false" ] && update_system_settings
 
-		#stop at last the preliminary networking (dhcp)
+		# now setup system configuration
+		# alx_setup_or_whatever_it_will_be_called()
+		[[ ${ALX_HW_DETECT} = false ]] && update_system_settings
+
+		# stop at last the preliminary networking (dhcp)
 		preliminary_network stop
 		;;
-	
+
 	stop)
-		#unset_alx_connected #--> now in alxsetstate-rc6
+		# unset_alx_connected #--> now in alxsetstate-rc6
 		# ! important !: del systemstate
-		[ -f /etc/alx-config/state/state ] && rm /etc/alx-config/state/state
+		[ -f /etc/alxconfig-ng/state/state ] && rm /etc/alxconfig-ng/state/state
 		sleep 0.1
 		;;
+
 	*)
 		echo "Usage: $0 {start|stop} ..."
 		;;