Magellan Linux

  • Back to homepage
    • /[alx-svn]/alx-src/branches/alxconf-060/init.d/alxsettings

    Diff of /alx-src/branches/alxconf-060/init.d/alxsettings

    Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

    alx-src/trunk/alxconfig-ng/init.d/alxsettings revision 257 by niro, Thu Apr 14 21:25:11 2005 UTC alx-src/branches/alxconf-060/init.d/alxsettings revision 2568 by niro, Mon Jul 4 21:16:51 2011 UTC
    # Line 1  Line 1 
    1  #!/bin/bash  #!/bin/bash
    2    # $Id$
    3  # <niro@magellan-linux.de>  # <niro@magellan-linux.de>
    4    
    5  #%rlevels: 7:s 0:k 6:k  #%rlevels: 7:s 0:k
    6  #%start: 41  #%start: 41
    7  #%stop: 01  #%stop: 01
    8    
    # Line 11  Line 11 
    11  #%before:  #%before:
    12  #%after:  #%after:
    13    
     # $Header: /home/cvsd/alx-cvs/alx-src/alxconfig-ng/init.d/alxsettings,v 1.10 2005-04-14 21:24:49 niro Exp $  
       
    14  # checks first if the client was already configured and if it has an valid serial  # checks first if the client was already configured and if it has an valid serial
    15  # if not it runs the autoconfiguration script  # if not it runs the autoconfiguration script
    16  # these settings will be used for client setup  # these settings will be used for client setup
    # Line 21  Line 19 
    19  # if no changes are at server side they will be kept, if yes the get updated.  # if no changes are at server side they will be kept, if yes the get updated.
    20  # the server settings has higher priority.  # the server settings has higher priority.
    21    
    22  source /etc/sysconfig/rc  source /etc/conf.d/rc
    23  source $rc_functions  source $rc_functions
    24    
    25  #mysql settings  # mysql settings
    26  source /etc/alxconfig-ng/config.rc  source /etc/alxconfig-ng/config.rc
    27    
    28    # helper functions
    29    source /usr/lib/alxconfig-ng/functions/common
    30  source /usr/lib/alxconfig-ng/functions/mysqlfunctions  source /usr/lib/alxconfig-ng/functions/mysqlfunctions
    31  source /usr/lib/alxconfig-ng/functions/serial_functions  source /usr/lib/alxconfig-ng/functions/serial_functions
    32  source /usr/lib/alxconfig-ng/functions/config_modules  source /usr/lib/alxconfig-ng/functions/config_modules
    # Line 35  source /usr/lib/alxconfig-ng/functions/c Line 36  source /usr/lib/alxconfig-ng/functions/c
    36  source /usr/lib/alxconfig-ng/functions/config_x11  source /usr/lib/alxconfig-ng/functions/config_x11
    37  source /usr/lib/alxconfig-ng/functions/config_auth  source /usr/lib/alxconfig-ng/functions/config_auth
    38  source /usr/lib/alxconfig-ng/functions/config_ssh_auth  source /usr/lib/alxconfig-ng/functions/config_ssh_auth
    39    source /usr/lib/alxconfig-ng/functions/config_versions
    40    
    41  #check if mysql is available  # other needed vars
     [ -x /usr/bin/mysql ] && MYSQL_ALX=true  
       
     #other needed vars  
    42  ALX_HW_DETECT=false  ALX_HW_DETECT=false
    43    ALX_FORCED_RECHECK=false
    44    ALX_RESET_SETTINGS=false
    45    ALX_CONFD_NETWORKING=false
    46    
    47  #unset vars which may kill us  # unset vars which may kill us
    48  unset ALX_SERIAL ALX_STATE  unset ALX_SERIAL ALX_STATE
    49    
    50    
    51  #setup needed directories  # setup needed directories
    52  [ ! -d /etc/alxconfig-ng/state ] && install -d /etc/alxconfig-ng/state  [ ! -d /etc/alxconfig-ng/state ] && install -d /etc/alxconfig-ng/state
    53    
    54    update_system_settings()
    55  update_system_settings(){  {
    56   echo -e ${COLMAGENTA}"Checking system setup ..."${COLDEFAULT}   rc_mecho Checking system setup ...
    57    
    58   # get the modules settings   # get the modules settings
    59   # ! is the first thing that must be configured !   # ! is the first thing that must be configured !
    # Line 73  update_system_settings(){ Line 75  update_system_settings(){
    75   config_auth   config_auth
    76    
    77   # exchange ssh rsa keys   # exchange ssh rsa keys
    78   config_ssh_auth   HOME=/root config_ssh_auth
    79    
    80     # import version info
    81     config_version
    82  }  }
    83    
    84  get_system_serial(){  get_system_serial()
    85    {
    86     local CUR_IP CUR_MAC CUR_MTIME ALX_IFACE
    87    
    88   local CUR_IP CUR_MAC CUR_MTIME   if [[ ${ALX_CONFD_NETWORKING} = true ]]
    89     then
    90     ALX_IFACE="$(< ${SETTINGSPATH}/confd-networking)"
    91     else
    92     ALX_IFACE="eth0"
    93     fi
    94    
    95   #check if serial file exists   # check if serial file exists
    96   if [ -f /etc/alxconfig-ng/serial ]   if [ -f /etc/alxconfig-ng/serial ] && [[ ${ALX_FORCED_RECHECK} = false ]]
    97   then   then
    98   source /etc/alxconfig-ng/serial   source /etc/alxconfig-ng/serial
    99    
    100   #start preliminary networking (dhcp)   # start preliminary networking (dhcp)
    101   preliminary_network start   preliminary_network start
    102    
    103   CUR_IP=$(/sbin/ifconfig eth0 | sed -n '/addr:/s/ [^r]*..//gp')   # check if mysql server is reachable
    104   CUR_MAC=$(/sbin/ifconfig eth0 | grep HWaddr | cut -d ' ' -f11)   # if not abort this script
    105     if ! reach_mysql_server
    106     then
    107     preliminary_network stop
    108     exit 1
    109     fi
    110    
    111     CUR_IP=$(ifconfig ${ALX_IFACE} | sed -n '/addr:/s/ [^r]*..//gp')
    112     CUR_MAC=$(ifconfig ${ALX_IFACE} | grep HWaddr | cut -d ' ' -f11)
    113   CUR_MTIME=$(date +%s)   CUR_MTIME=$(date +%s)
    114    
    115   echo -e ${COLOREDSTAR} "Trying to validate my serial ..."   rc_print "Trying to validate my serial ..."
    116    
    117   #nice serial output   # nice serial output
    118   $CURS_UP   $CURS_UP
    119   $SET_WCOL   $SET_WCOL
    120   echo "[ SN: ${ALX_SERIAL} ]"   echo "[ SN: ${ALX_SERIAL} ]"
    # Line 103  get_system_serial(){ Line 123  get_system_serial(){
    123   then   then
    124   ALX_STATE="ok"   ALX_STATE="ok"
    125   else   else
    126     # abort on non valid serial
    127   ALX_STATE="invalid serial"   ALX_STATE="invalid serial"
    128     echo "ALX_STATE=\"${ALX_STATE}\"" > /etc/alxconfig-ng/state/state
    129     show_invalid_serial_msg
    130     exit 1
    131   fi   fi
    132    
    133   else   else
    134   #run hardware detection   # run hardware detection
    135   echo   echo
    136   echo -e ${COLMAGENTA}"Preparing system for first boot"${COLDEFAULT}   if [[ ${ALX_FORCED_RECHECK} = true ]]
    137     then
    138     rc_mecho "Hardware autodetection forced by system-administrator"
    139     # always disable CONFD_NETWORKING here
    140     export ALX_CONFD_NETWORKING="false"
    141     else
    142     rc_mecho "Preparing system for first boot"
    143     fi
    144   ALX_HW_DETECT=true   ALX_HW_DETECT=true
    145   /etc/init.d/hwdetect start   hwsetup
    146    
    147   #set hostname to alx_default_hostname   # set hostname to alx_default_hostname
    148     # use old hostname if this is a forced re-check
    149     [[ ${ALX_FORCED_RECHECK} = true ]] && ALX_DEFAULT_HOSTNAME="$(< /etc/hostname)"
    150   [ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx   [ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx
    151   HOSTNAME="${ALX_DEFAULT_HOSTNAME}"   HOSTNAME="${ALX_DEFAULT_HOSTNAME}"
    152    
    153   #update the hostname on the system for sure   # update the hostname on the system for sure
    154   echo "${HOSTNAME}" > /etc/hostname   echo "${HOSTNAME}" > /etc/hostname
    155    
    156   #start preliminary networking (dhcp)   # start preliminary networking (dhcp)
    157   preliminary_network start   preliminary_network start
    158    
    159   CUR_IP=$(/sbin/ifconfig eth0 | sed -n '/addr:/s/ [^r]*..//gp')   # check if mysql server is reachable
    160   CUR_MAC=$(/sbin/ifconfig eth0 | grep HWaddr | cut -d ' ' -f11)   # if not abort this script
    161     if ! reach_mysql_server
    162     then
    163     preliminary_network stop
    164     exit 1
    165     fi
    166    
    167    
    168     CUR_IP=$(/sbin/ifconfig ${ALX_IFACE} | sed -n '/addr:/s/ [^r]*..//gp')
    169     CUR_MAC=$(/sbin/ifconfig ${ALX_IFACE} | grep HWaddr | cut -d ' ' -f11)
    170   CUR_MTIME=$(date +%s)   CUR_MTIME=$(date +%s)
    171    
    172   echo -e ${COLOREDSTAR} "Trying to get new serial ..."   # abort now if this is a forced re-check
    173     if [[ ${ALX_FORCED_RECHECK} = true ]]
    174     then
    175     # but first check the serial
    176     source /etc/alxconfig-ng/serial
    177    
    178   #request new serial   rc_print "Trying to validate my serial ..."
      #ALX_REG_DATE="$(date +%F)"  
    179    
    180   #we're using the mtime now (better for vaildating the serial)   # nice serial output
    181   mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \   $CURS_UP
    182   "insert into client_serials(   $SET_WCOL
    183   mtime,   echo "[ SN: ${ALX_SERIAL} ]"
      mac  
      )  
      values(  
      '${CUR_MTIME}',  
      '${CUR_MAC}'  
      );"  
    184    
    185   #then validate and retrieve serial   if validate_serial "${ALX_SERIAL}" "${ALX_REG_DATE}" "${CUR_MAC}"
    186     then
    187     ALX_STATE="ok"
    188     else
    189     # abort on non valid serial
    190     ALX_STATE="invalid serial"
    191     echo "ALX_STATE=${ALX_STATE}" > /etc/alxconfig-ng/state/state
    192     show_invalid_serial_msg
    193     exit 1
    194     fi
    195    
    196     # write current state to temp file
    197     echo "ALX_STATE=\"${ALX_STATE}\"" > /etc/alxconfig-ng/state/state
    198     [ -f /hardware-auto-detection ] && rm /hardware-auto-detection
    199    
    200     # now export ALX_FORCED_RECHECK=true
    201     # that the setting will be updated not inserted !
    202     export ALX_FORCED_RECHECK=true
    203     return 0
    204     fi
    205    
    206   ### warning must be changed that only the LAST ID will be fetched,  ###   rc_print "Trying to get new serial ..."
      ### or you get error if the computer name and date are the same     ###  
      ### you have more than one serial number then                       ###  
    207    
    208   #select highest id only (added max)   # request a new serial; one command now (cause must be done in the same session)
    209   ALX_SERIAL=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \   ALX_SERIAL=$(mysqldo "insert into client_serials (mtime, mac) values('${CUR_MTIME}','${CUR_MAC}');
    210   "select max(serial) from client_serials where mtime='${CUR_MTIME}' and mac='${CUR_MAC}'")   select last_insert_id();")
    211    
    212   if [ "${ALX_SERIAL}" != NULL ]   if [[ ${ALX_SERIAL} != NULL ]]
    213   then   then
    214   #nice serial output   # nice serial output
    215   $CURS_UP   $CURS_UP
    216   $SET_WCOL   $SET_WCOL
    217   echo "[ SN: ${ALX_SERIAL} ]"   echo "[ SN: ${ALX_SERIAL} ]"
    218    
    219   #set ALX_STATE to ok so everybody that everything was ok   # set ALX_STATE to ok so everybody knows that everything was ok
    220   ALX_STATE=ok   ALX_STATE=ok
    221    
    222   echo "ALX_SERIAL=${ALX_SERIAL}" > /etc/alxconfig-ng/serial   echo "ALX_SERIAL=\"${ALX_SERIAL}\"" > /etc/alxconfig-ng/serial
    223   echo "ALX_REG_DATE=${CUR_MTIME}" >> /etc/alxconfig-ng/serial   echo "ALX_REG_DATE=\"${CUR_MTIME}\"" >> /etc/alxconfig-ng/serial
    224    
    225   evaluate_retval   evaluate_retval
    226   else   else
    227   #print false (works only if this is the first statement here)   # print false (works only if this is the first statement here)
    228   evaluate_retval   evaluate_retval
    229    
    230   #set ALX_STATE to error so everybody sees there was an error   # set ALX_STATE to error so everybody sees there was an error
    231   ALX_STATE=error   ALX_STATE=error
    232    
    233   #show an error that no new serial was found   # show an error that no new serial was found
    234   #nice serial output   # nice serial output
    235   $CURS_UP   $CURS_UP
    236   $SET_WCOL   $SET_WCOL
    237   echo -e "[ SN: ${COLRED}None, 0${COLDEFAULT} ]"   echo -e "[ SN: ${COLRED}None, 0${COLDEFAULT} ]"
    238   fi   fi
    239   fi   fi
    240    
    241   #write current state to temp file   # write current state to temp file
    242   echo "ALX_STATE=${ALX_STATE}" > /etc/alxconfig-ng/state/state   echo "ALX_STATE=\"${ALX_STATE}\"" > /etc/alxconfig-ng/state/state
    243     echo "ALX_IFACE=\"${ALX_IFACE}\"" >> /etc/alxconfig-ng/state/state
    244  }  }
    245    
    246    
    247  check_is_configured() {  check_is_configured()
    248    {
    249   if [ -f /etc/alxconfig-ng/state/configured ]   if [ -f /etc/alxconfig-ng/state/configured ]
    250   then   then
    251   export ALX_CONFIGURED=true   export ALX_CONFIGURED=true
    # Line 198  check_is_configured() { Line 256  check_is_configured() {
    256    
    257    
    258  # imports current settings to the database resolved by the hardware detection  # imports current settings to the database resolved by the hardware detection
    259  import_settings_to_db() {  import_settings_to_db()
    260   #note: networking is always 'dhcp' if hw was autodetected  {
    261   #note: default_domain/hostname is set in config.rc   # note: networking is always 'dhcp' if hw was autodetected
    262     # note: default_domain/hostname is set in config.rc
    263    
    264   #to be safe, we do some sanity checks   # to be safe, we do some sanity checks
    265   [ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain   [ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain
    266   [ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx   [ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx
    267    
    268   #vars used by hwdetect   # vars used by hwsetup
    269   local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME   local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
    270   local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER   local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
    271   local MOUSETYPE XMOUSETYPE FULLNAME DEVICE   local MOUSETYPE XMOUSETYPE FULLNAME DEVICE
    272    
    273   #get setting from hwdetect   # get setting from hwsetup
    274   source /etc/sysconfig/hwsetup/knoppix   source /etc/conf.d/hwsetup/knoppix
    275   source /etc/sysconfig/hwsetup/mouse   source /etc/conf.d/hwsetup/mouse
    276    
    277   echo   echo
    278   echo -e ${COLMAGENTA}"Importing detected settings to database"${COLDEFAULT}   rc_mecho "Importing detected settings to database"
    279    
    280   #network   # network
    281   echo -e "      Network settings ..."   rc_mecho "      Network settings ..."
    282   mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \   if [[ ${ALX_CONFD_NETWORKING} = true ]]
    283   "insert into cfg_network(   then
    284   hostname,   # get settings
    285   serial,   for iface in $(onboot_interface_list ${network_settings}/net.*)
    286   module,   do
    287   domain,   [[ $(< ${SETTINGSPATH}/confd-networking) != ${iface} ]] && continue
    288   networking   rc_echo "WARNING: only importing settings for interface [ ${iface} ] !"
    289   )   source ${network_settings}/net.${iface} || echo "Error: could not read '${network_settings}/net.${iface}'"
    290   values(   NETCARD_DRIVER="$(cat /etc/modprobe.d/net.${iface}.conf | cut -d' ' -f3)"
    291   '${ALX_DEFAULT_HOSTNAME}',  
    292   '${ALX_SERIAL}',   mysqldo "insert into cfg_network(
    293   '${NETCARD_DRIVER}',   hostname,
    294   '${ALX_DEFAULT_DOMAIN}',   serial,
    295   'dhcp'   module,
    296   );"   domain,
    297     networking,
    298     netmask,
    299     dns,
    300     gateway,
    301     broadcast,
    302     ip,
    303     forcemacto,
    304     wireless_bitrate,
    305     wireless_channel,
    306     wireless_essid,
    307     wireless_frequency,
    308     wireless_mode,
    309     wireless_nick,
    310     wireless_auth_mode,
    311     wireless_key_length,
    312     wireless_key,
    313     wireless_key_ascii
    314     )
    315     values(
    316     '${ALX_DEFAULT_HOSTNAME}',
    317     '${ALX_SERIAL}',
    318     '${NETCARD_DRIVER}',
    319     '${ALX_DEFAULT_DOMAIN}',
    320     '${NETWORKING}',
    321     '${NETMASK}',
    322     '${NAMESERVER}',
    323     '${GATEWAY}',
    324     '${BROADCAST}',
    325     '${IP}',
    326     '${FORCE_MAC_TO}',
    327     '${WIRELESS_BITRATE}',
    328     '${WIRELESS_CHANNEL}',
    329     '${WIRELESS_ESSID}',
    330     '${WIRELESS_FREQUENCY}',
    331     '${WIRELESS_MODE}',
    332     '${WIRELESS_NICK}',
    333     '${WIRELESS_AUTH_MODE}',
    334     '${WIRELESS_KEY_LENGTH}',
    335     '${WIRELESS_KEY}',
    336     '${WIRELESS_KEY_ASCII}'
    337     );"
    338    
    339     # only insert the *FIRST* iface
    340     break
    341     done
    342     else
    343     mysqldo "insert into cfg_network(
    344     hostname,
    345     serial,
    346     module,
    347     domain,
    348     networking
    349     )
    350     values(
    351     '${ALX_DEFAULT_HOSTNAME}',
    352     '${ALX_SERIAL}',
    353     '${NETCARD_DRIVER}',
    354     '${ALX_DEFAULT_DOMAIN}',
    355     'dhcp'
    356     );"
    357     fi
    358   evaluate_retval   evaluate_retval
    359    
    360   #xserver   # xserver
    361   echo -e "      Graphic settings ..."   rc_mecho "      Graphic settings ..."
    362   #xserver general   # xserver general
    363   ( mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \   ( mysqldo "insert into cfg_graphic(
      "insert into cfg_graphic(  
    364   serial,   serial,
    365   module,   module,
    366   resolution,   resolution,
    367   depth,   depth,
    368   monitorid   refresh_rate
    369   )   )
    370   values(   values(
    371   '${ALX_SERIAL}',   '${ALX_SERIAL}',
    372   '${XMODULE}',   '${XMODULE}',
    373   '1024x768',   '1024x768',
    374   '16',   '16',
    375   '0'   '60'
    376   );"; )   );"; )
    377   evaluate_retval   evaluate_retval
    378    
    379   # input   # input
    380   echo -e "      Input settings ..."   rc_mecho "      Input settings ..."
    381   mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \   mysqldo "insert into cfg_input(serial,mouse) values('${ALX_SERIAL}','${XMOUSETYPE}');"
      "insert into cfg_input(serial,mouse) values('${ALX_SERIAL}','${XMOUSETYPE}');"  
    382   evaluate_retval   evaluate_retval
    383    
    384   # auth   # auth
    385   echo -e "      Authentifcation settings ..."   rc_mecho "      Authentification settings ..."
    386   mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \   mysqldo "insert into client_auth(
      "insert into client_auth(  
    387   serial,   serial,
    388   username,   username,
    389   shell,   shell,
    # Line 284  import_settings_to_db() { Line 401  import_settings_to_db() {
    401   );"   );"
    402   evaluate_retval   evaluate_retval
    403    
    404     # exchange ssh rsa keys - the first boot needs this !
    405     # or no reboot will work via the webadmin
    406     rc_mecho "      SSH authentification settings ..."
    407     HOME=/root config_ssh_auth
    408     evaluate_retval
    409    
    410     # autostart
    411     rc_mecho "      Autostart settings ..."
    412     mysqldo "insert into cfg_autostart(serial,session) values('${ALX_SERIAL}','');"
    413    
    414     # screensaver
    415     rc_mecho "      Screensaver settings ..."
    416     mysqldo "insert into cfg_screensaver(serial,screensaver) values('${ALX_SERIAL}','')"
    417    
    418     # version info
    419     rc_mecho "      OS version info ..."
    420     local alx_os
    421     local alx_utils
    422     alx_os="$(< /etc/mageversion)"
    423     alx_utils="$(magequery -n alxconfig-ng | sed 's:.*\[\ \(.*\)\ \].*:\1:')"
    424     alx_utils="${alx_utils/alxconfig-ng-}"
    425     mysqldo "insert into client_version(serial,os,utils) values('${ALX_SERIAL}','${alx_os}','${alx_utils}')"
    426    
    427     evaluate_retval
    428    }
    429    
    430    # imports current settings to the database resolved by the hardware detection
    431    update_settings_in_db()
    432    {
    433     # note: networking is always 'dhcp' if hw was autodetected
    434     # note: default_domain/hostname is set in config.rc or exported
    435     # note: we updating only hardware settings here !
    436    
    437     # to be safe, we do some sanity checks
    438     [ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain
    439     [ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx
    440    
    441     # vars used by hwsetup
    442     local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
    443     local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
    444     local MOUSETYPE XMOUSETYPE FULLNAME DEVICE
    445    
    446     # get setting from hwsetup
    447     source /etc/conf.d/hwsetup/knoppix
    448     source /etc/conf.d/hwsetup/mouse
    449    
    450     echo
    451     rc_mecho "Updating detected settings in database"
    452    
    453     # network
    454     rc_mecho "      Network settings ..."
    455     if [[ ${ALX_CONFD_NETWORKING} = true ]]
    456     then
    457     # get settings
    458     #source ${rc_base}/init.d/network &> /dev/null
    459     for iface in $(onboot_interface_list ${network_settings}/net.*)
    460     do
    461     [[ $(< ${SETTINGSPATH}/confd-networking) != ${iface} ]] && continue
    462     rc_echo "WARNING: only importing settings for interface [ ${iface} ] !"
    463     source ${network_settings}/net.${iface} || exit 1
    464     NETCARD_DRIVER="$(cat /etc/modprobe.d/net.${iface}.conf | cut -d' ' -f3)"
    465    
    466     mysqldo "update cfg_network set
    467     hostname='${ALX_DEFAULT_HOSTNAME}',
    468     module='${NETCARD_DRIVER}',
    469     domain='${ALX_DEFAULT_DOMAIN}',
    470     networking='${NETWORKING}',
    471     netmask='${NETMASK}',
    472     dns='${NAMESERVER}',
    473     gateway='${GATEWAY}',
    474     broadcast='${BROADCAST}',
    475     ip='${IP}',
    476     forcemacto='${FORCE_MAC_TO}',
    477     wireless_bitrate='${WIRELESS_BITRATE}',
    478     wireless_channel='${WIRELESS_CHANNEL}',
    479     wireless_essid='${WIRELESS_ESSID}',
    480     wireless_frequency='${WIRELESS_FREQUENCY}',
    481     wireless_mode='${WIRELESS_MODE}',
    482     wireless_nick='${WIRELESS_NICK}',
    483     wireless_auth_mode='${WIRELESS_AUTH_MODE}',
    484     wireless_key_length='${WIRELESS_KEY_LENGTH}',
    485     wireless_key='${WIRELESS_KEY}',
    486     wireless_key_ascii='${WIRELESS_KEY_ASCII}'
    487     where serial=${ALX_SERIAL};"
    488    
    489     # only insert the *FIRST* iface
    490     break
    491     done
    492     else
    493     mysqldo "update cfg_network set
    494     hostname='${ALX_DEFAULT_HOSTNAME}',
    495     module='${NETCARD_DRIVER}',
    496     domain='${ALX_DEFAULT_DOMAIN}',
    497     networking='dhcp'
    498     where serial=${ALX_SERIAL};"
    499     fi
    500     evaluate_retval
    501    
    502     # xserver
    503     rc_mecho "      Graphic settings ..."
    504     # xserver general
    505     mysqldo "update cfg_graphic set
    506     module='${XMODULE}',
    507     resolution='1024x768',
    508     depth='16',
    509     refresh_rate='60'
    510     where serial=${ALX_SERIAL};"
    511     evaluate_retval
    512    
    513   # input   # input
    514   echo -e "      Autostart settings ..."   rc_mecho "      Input settings ..."
    515   mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \   mysqldo "update cfg_input set mouse='${XMOUSETYPE}' where serial=${ALX_SERIAL};"
      "insert into cfg_autostart(serial,session) values('${ALX_SERIAL}','');"  
    516   evaluate_retval   evaluate_retval
    517    
    518     # version info
    519     rc_mecho "      OS version info ..."
    520     local alx_os
    521     local alx_utils
    522     alx_os="$(< /etc/mageversion)"
    523     alx_utils="$(magequery -n alxconfig-ng-alx | sed 's:.*\[\ \(.*\)\ \].*:\1:')"
    524     alx_utils="${alx_utils/alxconfig-ng-alx-}"
    525     mysqldo "update client_version set os='${alx_os}', utils='${alx_utils}' where serial=${ALX_SERIAL};"
    526  }  }
    527    
    528  # imports current settings to the local system resolved by the hardware detection  # imports current settings to the local system resolved by the hardware detection
    529  # we only need the network settings  # we only need the network settings
    530  import_settings_local(){  import_settings_local()
    531   #note: networking is always 'dhcp' if hw was autodetected  {
    532   #note: default_domain/hostname is set in config.rc   # note: networking is always 'dhcp' if hw was autodetected
    533     # note: default_domain/hostname is set in config.rc
    534    
    535   #to be safe, we do some sanity checks   # to be safe, we do some sanity checks
    536   [ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain   [ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain
    537   [ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx   [ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx
    538    
    539   #vars used by hwdetect   # vars used by hwsetup
    540   local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME   local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
    541   local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER   local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
    542   local MOUSETYPE XMOUSETYPE FULLNAME DEVICE   local MOUSETYPE XMOUSETYPE FULLNAME DEVICE
    543    
    544   #get setting from hwdetect   # get setting from hwsetup
    545   source /etc/sysconfig/hwsetup/knoppix   source /etc/conf.d/hwsetup/knoppix
    546    
    547   echo   echo
    548   echo -e ${COLMAGENTA}"Importing detected settings to local system"${COLDEFAULT}   rc_mecho "Importing detected settings to local system"
    549    
    550   [ ! -d ${SETTINGSPATH} ] && install -d ${SETTINGSPATH}   if [[ ${ALX_CONFD_NETWORKING} = false ]]
    551   echo "${NETCARD_DRIVER}" > ${SETTINGSPATH}/modules   then
    552   evaluate_retval   # set an device alias for modprobe.conf
    553     [ ! -d /etc/modprobe.d ] && install -d /etc/modprobe.d
    554     # update only if not the same (to speed up bootprocess - no depmod)
    555     CONFIG="/etc/modprobe.d/net.${ALX_IFACE}.conf"
    556     clearconfig
    557     addconfig "alias ${ALX_IFACE} ${cfg_network_module}"
    558    
    559     # update confd-networking default iface
    560     [ ! -d ${SETTINGSPATH} ] && install -d ${SETTINGSPATH}
    561     CONFIG="${SETTINGSPATH}/confd-networking"
    562     clearconfig
    563     addconfig "${ALX_IFACE}"
    564    
    565     # regenerate modprobe.conf
    566     [ -x $(which modules-update) ] && modules-update || rc_echo "modules-update not found!"
    567     evaluate_retval
    568     fi
    569    
    570   #set system state to 'already configured'   # set system state to 'already configured'
    571   touch /etc/alxconfig-ng/state/configured   touch /etc/alxconfig-ng/state/configured
    572    
    573   # default passwords are bad   # install slim desktopmanager configuration
    574   #usermod -p $(perl -e "printf(crypt('foobar','AD'))") root   config_display_manager
    575   #usermod -p $(perl -e "printf(crypt('foobar','AD'))") ${ALX_UNPRIV_USER}  
    576   #smbpasswd -a root foobar   # if only an recheck was forced than abort now
    577     [[ ${ALX_FORCED_RECHECK} = true ]] && return 0
    578    
    579     # create a fresh fluxbox directory
    580     [ -d ${ALX_UNPRIV_HOME}/.fluxbox ] && rm -rf ${ALX_UNPRIV_HOME}/.fluxbox
    581     install -d ${ALX_UNPRIV_HOME}/.fluxbox
    582    
    583     # now generate fluxbox config files
    584    
    585     # fluxbox main config
    586     local fbinit
    587     if [ -f ${ALX_SKELETONS}/fluxbox/init ]
    588     then
    589     fbinit="${ALX_SKELETONS}/fluxbox/init"
    590     else
    591     fbinit="/usr/share/fluxbox/init"
    592     fi
    593     cat ${fbinit} > ${ALX_UNPRIV_HOME}/.fluxbox/init
    594    
    595     # fluxbox autostart
    596     CONFIG="${ALX_UNPRIV_HOME}/.fluxbox/apps"
    597     # do not show decorations on messages generated with xmessage
    598     if [ -x /usr/bin/xmessage ]
    599     then
    600     addconfig '[app] (xmessage)'
    601     addconfig ' [Deco] {NONE}'
    602     addconfig '[end]'
    603     fi
    604     # add icon utility
    605     [ -x /usr/bin/idesk ] && addconfig '[startup] {nohup idesk > /dev/null &}'
    606     # add numlock utility
    607     [ -x /usr/bin/numlockx ] && addconfig '[startup] {nohup numlockx on &}'
    608    
    609     # fluxbox hotkeys
    610     local fbkeys
    611     if [ -f ${ALX_SKELETONS}/fluxbox/keys ]
    612     then
    613     fbkeys="${ALX_SKELETONS}/fluxbox/keys"
    614     else
    615     fbkeys="/usr/share/fluxbox/keys"
    616     fi
    617     cat ${fbkeys} > ${ALX_UNPRIV_HOME}/.fluxbox/keys
    618    
    619     # fluxbox menu header
    620     cat ${ALX_SKELETONS}/fluxbox/menu.header > ${ALX_UNPRIV_HOME}/.fluxbox/menu
    621    
    622     # now fix it with proper messages :P
    623     local ver="$(< /etc/mageversion)"
    624     sed -i "s:@CHANGEME@:alx-${ver}  #${ALX_SERIAL}:g" ${ALX_UNPRIV_HOME}/.fluxbox/menu
    625    
    626     # add a newline (maybe there is no crlf in the header)
    627     echo >> ${ALX_UNPRIV_HOME}/.fluxbox/menu
    628    
    629     # fluxbox menu footer
    630     cat ${ALX_SKELETONS}/fluxbox/menu.footer >> ${ALX_UNPRIV_HOME}/.fluxbox/menu
    631    
    632     # add a newline (maybe there is no crlf in the footer)
    633     echo >> ${ALX_UNPRIV_HOME}/.fluxbox/menu
    634    
    635     # setup some standart icons (sysinfo.lnk)
    636     # clean desktop icon location
    637     [ -d ${ALX_UNPRIV_HOME}/.idesktop ] && rm -rf ${ALX_UNPRIV_HOME}/.idesktop
    638     install -d ${ALX_UNPRIV_HOME}/.idesktop
    639    
    640     # add shutdown, reboot icons
    641     local name
    642     # default settings
    643     declare -i x=30
    644     declare -i y=30
    645     for i in shutdown reboot
    646     do
    647     case ${i} in
    648     shutdown) name="Herunterfahren" ;;
    649     reboot) name="Neustarten" ;;
    650     esac
    651    
    652     generate_icon \
    653     --name "${name}" \
    654     --command "/usr/lib/alxconfig-ng/bin/user_${i}.sh" \
    655     --icon "${ALX_SESSIONS_ICONS}/${i}.png" \
    656     --dest "${dest}/${i}.lnk" \
    657     --xres "${x}" \
    658     --yres "${y}"
    659    
    660     y=$((${y} + 80))
    661     done
    662    
    663     # last but not least gen a icon with some sys informations
    664     local sysinfo
    665     local osversion
    666     local xres
    667     local yres
    668    
    669     osversion="$(< /etc/mageversion)"
    670     sysinfo="Hostname: ${ALX_DEFAULT_HOSTNAME} Serial: #${ALX_SERIAL} OS: alx-${osversion} Kernel: $(uname -r)"
    671    
    672     # at first boot we got always a resolution of 1024x768-16@60
    673     # middle of the screen
    674     # (no txt - length required, xtdesk manage that itself)
    675     xres="$((1024 / 2))"
    676     # default y pos (full yres -22 !)
    677     yres="$((768 - 22 ))"
    678    
    679     generate_icon \
    680     --name "${sysinfo}" \
    681     --command "exit 0" \
    682     --icon "${ALX_SESSIONS_ICONS}/sysinfo.png" \
    683     --dest "${ALX_UNPRIV_HOME}/.idesktop/sysinfo.lnk" \
    684     --xres "${xres}" \
    685     --yres "${yres}" \
    686     --icon-width "1" \
    687     --icon-height "1"
    688    
    689     # set correct permissions
    690     chown ${ALX_UNPRIV_USER}:${ALX_UNPRIV_GROUP} ${ALX_UNPRIV_HOME}
    691     chown ${ALX_UNPRIV_USER}:${ALX_UNPRIV_GROUP} ${ALX_UNPRIV_HOME}/.fluxbox
    692     chmod 0755 ${ALX_UNPRIV_HOME}/.fluxbox
    693     chmod 0755 ${ALX_UNPRIV_HOME}/.idesktop
    694     if [ -f ${ALX_UNPRIV_HOME}/.ideskrc ]
    695     then
    696     chmod 0644 ${ALX_UNPRIV_HOME}/.ideskrc
    697     fi
    698  }  }
    699    
    700  #start|stop  # start|stop
    701  preliminary_network(){  preliminary_network()
    702    {
    703   local module   local module
    704    
    705   if [ -f /etc/alxconfig-ng/state/configured ]   if [ -f /etc/alxconfig-ng/state/configured ]
    706   then   then
    707   #get module name   # compat for old clients
    708   module=$(cat ${SETTINGSPATH}/modules)   if [ -f ${SETTINGSPATH}/modules ]
    709   modprobe ${module}   then
    710     # get module name
    711     module=$(cat ${SETTINGSPATH}/modules)
    712     modprobe ${module}
    713     fi
    714    
    715   else   else
    716   #vars used by hwdetect   # vars used by hwsetup
    717   local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME   local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
    718   local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER   local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
    719    
    720   #get setting from hwdetect   # get setting from hwsetup
    721   source /etc/sysconfig/hwsetup/knoppix   source /etc/conf.d/hwsetup/knoppix
    722   modprobe ${NETCARD_DRIVER}   modprobe ${NETCARD_DRIVER}
    723   fi   fi
    724    
    # Line 349  preliminary_network(){ Line 727  preliminary_network(){
    727   # keeping like always safe:   # keeping like always safe:
    728   # no network should be startet here,   # no network should be startet here,
    729   # so we can delete all pid files if one exists   # so we can delete all pid files if one exists
    730   if ps -A|grep dhcpcd > /dev/null   if [[ ! -z $(pidof $(basename ${ALX_DHCP_PROG})) ]]
    731   then   then
    732   echo -e ${COLMAGENTA}"Forcing network down"${COLDEFAULT}   rc_mecho "Forcing network down"
    733   dhcpcd -k   killall $(basename ${ALX_DHCP_PROG}) &> /dev/null
    734   sleep 1   sleep 1
      else  
      rm -f /var/run/dhcpcd-eth?.pid  
    735   fi   fi
    736     [[ ${ALX_CONFD_NETWORKING} = true ]] && ${rc_base}/init.d/network stop
    737    
    738   echo -e ${COLMAGENTA}"Starting preliminary network ... "${COLDEFAULT}   rc_mecho "Starting preliminary networking ... "
      dhcpcd &> /dev/null  
       
      # aka_fix ########################################  
      #ifconfig eth0 128.20.222.222 netmask 255.255.0.0 up  
      #route del default gw 128.20.50.13 &> /dev/null  
      #route add default gw 128.20.50.21 &> /dev/null  
      #echo "nameserver 128.20.50.21" > /etc/resolv.conf  
      ##################################################  
    739    
    740   evaluate_retval   # start network configured from /etc/conf.d
    741     if [[ ${ALX_CONFD_NETWORKING} = true ]]
    742     then
    743     ${rc_base}/init.d/network start
    744     else
    745     rc_print "Starting default dhcp based networking ... "
    746     ${ALX_DHCP_PROG} ${ALX_DHCP_START} ${ALX_IFACE} &> /dev/null
    747     evaluate_retval
    748     fi
    749   ;;   ;;
    750    
    751   stop)   stop)
    752   echo -e ${COLMAGENTA}"Stopping preliminary network ... "${COLDEFAULT}   rc_mecho "Stopping preliminary networking ... "
    753   ifconfig eth0 down   if [[ ${ALX_CONFD_NETWORKING} = true ]]
    754   if ps -A|grep dhcpcd > /dev/null   then
    755     ${rc_base}/init.d/network stop
    756     else
    757     rc_print "Stopping default dhcp based networking ... "
    758     ifconfig ${ALX_IFACE} down
    759     fi
    760     if [[ ! -z $(pidof $(basename ${ALX_DHCP_PROG})) ]]
    761   then   then
    762   dhcpcd -z  &> /dev/null   killall $(basename ${ALX_DHCP_PROG}) &> /dev/null
    763     sleep 1
    764   fi   fi
    765   evaluate_retval   evaluate_retval
    766   ;;   ;;
    # Line 387  preliminary_network(){ Line 771  preliminary_network(){
    771   esac   esac
    772  }  }
    773    
    774    reset_system_settings()
    775    {
    776     # force load of de kbdkeys
    777     loadkeys -q de
    778     rc_echo
    779     rc_echo -en ${COLRED}
    780     rc_echo -n "*** Warning: you are about to reset *all* local settings on this system!"
    781     rc_echo -e ${COLDEFAULT}
    782     rc_echo "*** Do you really want to continue ?"
    783     rc_echo -n "*** Enter 'yes' to continue, anything else to abort: "
    784     read kbinsert
    785     if [[ ${kbinsert} = yes ]]
    786     then
    787     rc_echo -en ${COLRED}
    788     rc_echo -n "*** OK, you really want it ... killing all settings: "
    789     for i in 3 2 1 now
    790     do
    791     rc_echo -n " ${i}"
    792     sleep 1
    793     done
    794     rc_echo -e ${COLDEFAULT}
    795    
    796     ## reset all settings:
    797     rm -rf ${SETTINGSPATH}/*
    798     rm -f /etc/alxconfig-ng/serial
    799     rm -rf /etc/alxconfig-ng/state
    800    
    801     # clear all printers & net-shares
    802     :> /etc/printcap
    803    
    804     # remove lprng
    805     rc-config del lprng &> /dev/null
    806    
    807     # remove all user settings
    808     [ -d ${ALX_UNPRIV_HOME} ] && rm -rf ${ALX_UNPRIV_HOME}
    809    
    810     # remove all ica-sessions
    811     find ${ALX_ICA_SESSIONS} -type f -name '*.ica' | xargs rm
    812    
    813     # remove all old nics and modules configs
    814     find /etc/conf.d -type f -name 'net.*' | xargs rm
    815     find /etc/modprobe.d -type f -name 'net.*' | xargs rm
    816    
    817     # restore default networking
    818     cat ${ALX_SKELETONS}/net/net.eth0 > /etc/conf.d/net.eth0
    819    
    820     rc_echo "I am done now, press [Enter] to reboot system ..."
    821     else
    822     rc_echo "Aborted, press [Enter] to reboot system ..."
    823     fi
    824     read
    825     reboot
    826    }
    827    
    828    onboot_interface_list()
    829    {
    830     local file
    831     local devices
    832     local iface
    833    
    834     # get list of all devices
    835     for file in $@
    836     do
    837     if [[ $(read_value ONBOOT ${file}) = yes ]]
    838     then
    839     iface="$(basename ${file} | sed s/net.//)"
    840     # exclude backup files
    841     case "${iface}" in
    842     *~) ;;
    843     *) devices="${devices} $(basename ${file} | sed s/net.//)" ;;
    844     esac
    845     fi
    846     done
    847    
    848     echo "${devices}"
    849    }
    850    
    851    # read values from net.* files
    852    read_value()
    853    {
    854     local var="$1"
    855     local file="$2"
    856     local value
    857    
    858     # local all possible vars
    859     # global
    860     local ONBOOT
    861     local NETWORKING
    862    
    863     # static
    864     local IP
    865     local NETMASK
    866     local BROADCAST
    867     local NETWORKING
    868     local FORCE_MAC_TO
    869    
    870     # dhcp
    871     local DHCP_PROG
    872     local DHCP_START
    873     local DHCP_STOP
    874    
    875     # default gw
    876     local GATEWAY
    877     local GATEWAY_IF
    878    
    879     # wireless extensions
    880     local WIRELESS_AP
    881     local WIRELESS_AUTH_MODE
    882     local WIRELESS_BITRATE
    883     local WIRELESS_CHANNEL
    884     local WIRELESS_DEFAULT_KEY
    885     local WIRELESS_ESSID
    886     local WIRELESS_FREQUENCY
    887     local WIRELESS_KEY
    888     local WIRELESS_KEY_ASCII
    889     local WIRELESS_KEY_0
    890     local WIRELESS_KEY_1
    891     local WIRELESS_KEY_2
    892     local WIRELESS_KEY_3
    893     local WIRELESS_KEY_LENGTH
    894     local WIRELESS_MODE
    895     local WIRELESS_NICK
    896     local WIRELESS_NWID
    897     local WIRELESS_POWER
    898    
    899     source ${file}
    900     eval value=\$$(echo ${var})
    901     echo "${value}"
    902    }
    903    
    904  case $1 in  case $1 in
    905   start)   start)
    906   #retrieve or validate current serial   # check for global overrides
    907     [ -f ${SETTINGSPATH}/confd-networking ] && ALX_CONFD_NETWORKING=true
    908     [ -f /hardware-auto-detection ] && ALX_FORCED_RECHECK=true
    909     read_cmdline hardware-auto-detection && ALX_FORCED_RECHECK=true
    910     read_cmdline alx-reset-settings && ALX_RESET_SETTINGS=true
    911    
    912     # kill all settings if requested
    913     if [[ ${ALX_RESET_SETTINGS} = true ]]
    914     then
    915     reset_system_settings
    916     fi
    917    
    918     # retrieve or validate current serial
    919   get_system_serial   get_system_serial
    920   if [ "${ALX_HW_DETECT}" == "true" ]   if [[ ${ALX_HW_DETECT} = true ]]
    921   then   then
    922   import_settings_to_db   if [[ ${ALX_FORCED_RECHECK} = true ]]
    923     then
    924     update_settings_in_db
    925     else
    926     import_settings_to_db
    927     fi
    928   import_settings_local   import_settings_local
    929    
    930   # here we should also exchange the ssh keys   # here we should also exchange the ssh keys
    # Line 402  case $1 in Line 933  case $1 in
    933   config_ssh_auth   config_ssh_auth
    934   fi   fi
    935    
    936   #now setup system configuration   # now setup system configuration
    937   #alx_setup_or_whatever_it_will_be_called()   # alx_setup_or_whatever_it_will_be_called()
    938   [ "${ALX_HW_DETECT}" == "false" ] && update_system_settings   [[ ${ALX_HW_DETECT} = false ]] && update_system_settings
    939    
    940   #stop at last the preliminary networking (dhcp)   # stop at last the preliminary networking (dhcp)
    941   preliminary_network stop   preliminary_network stop
    942   ;;   ;;
    943    
    944   stop)   stop)
    945   #unset_alx_connected #--> now in alxsetstate-rc6   # unset_alx_connected #--> now in alxsetstate-rc6
    946   # ! important !: del systemstate   # ! important !: del systemstate
    947   [ -f /etc/alxconfig-ng/state/state ] && rm /etc/alxconfig-ng/state/state   [ -f /etc/alxconfig-ng/state/state ] && rm /etc/alxconfig-ng/state/state
    948   sleep 0.1   sleep 0.1
    949   ;;   ;;
    950    
    951   *)   *)
    952   echo "Usage: $0 {start|stop} ..."   echo "Usage: $0 {start|stop} ..."
    953   ;;   ;;
    954  esac  esac
       
    Legend:
    Removed from v.257  
    changed lines
      Added in v.2568