Contents of /alx-src/branches/alxconf-060/init.d/alxsettings
Parent Directory | Revision Log
Revision 2122 -
(show annotations)
(download)
Mon May 16 11:08:31 2011 UTC (13 years, 4 months ago) by niro
File size: 23288 byte(s)
Mon May 16 11:08:31 2011 UTC (13 years, 4 months ago) by niro
File size: 23288 byte(s)
-renamed modules.d -> modprobe.d and added .conf suffix -clear printing-settings properly and remove services
1 | #!/bin/bash |
2 | # $Id$ |
3 | # <niro@magellan-linux.de> |
4 | |
5 | #%rlevels: 7:s 0:k |
6 | #%start: 41 |
7 | #%stop: 01 |
8 | |
9 | #deps |
10 | #%needs: |
11 | #%before: |
12 | #%after: |
13 | |
14 | # checks first if the client was already configured and if it has an valid serial |
15 | # if not it runs the autoconfiguration script |
16 | # these settings will be used for client setup |
17 | # |
18 | # if client was valid it first will check if his settings against the server |
19 | # if no changes are at server side they will be kept, if yes the get updated. |
20 | # the server settings has higher priority. |
21 | |
22 | source /etc/conf.d/rc |
23 | source $rc_functions |
24 | |
25 | # mysql settings |
26 | source /etc/alxconfig-ng/config.rc |
27 | |
28 | # helper functions |
29 | source /usr/lib/alxconfig-ng/functions/common |
30 | source /usr/lib/alxconfig-ng/functions/mysqlfunctions |
31 | source /usr/lib/alxconfig-ng/functions/serial_functions |
32 | source /usr/lib/alxconfig-ng/functions/config_modules |
33 | source /usr/lib/alxconfig-ng/functions/config_network |
34 | source /usr/lib/alxconfig-ng/functions/config_printers |
35 | source /usr/lib/alxconfig-ng/functions/config_sessions |
36 | source /usr/lib/alxconfig-ng/functions/config_x11 |
37 | source /usr/lib/alxconfig-ng/functions/config_auth |
38 | source /usr/lib/alxconfig-ng/functions/config_ssh_auth |
39 | source /usr/lib/alxconfig-ng/functions/config_versions |
40 | |
41 | # other needed vars |
42 | ALX_HW_DETECT=false |
43 | ALX_FORCED_RECHECK=false |
44 | ALX_RESET_SETTINGS=false |
45 | ALX_CONFD_NETWORKING=false |
46 | |
47 | # unset vars which may kill us |
48 | unset ALX_SERIAL ALX_STATE |
49 | |
50 | |
51 | # setup needed directories |
52 | [ ! -d /etc/alxconfig-ng/state ] && install -d /etc/alxconfig-ng/state |
53 | |
54 | |
55 | # read_cmdline ${item} |
56 | read_cmdline() |
57 | { |
58 | local i |
59 | |
60 | for i in $(< /proc/cmdline) |
61 | do |
62 | [[ ${i} = $1 ]] && return 0 |
63 | done |
64 | |
65 | return 1 |
66 | } |
67 | |
68 | update_system_settings() |
69 | { |
70 | echo -e ${COLMAGENTA}"Checking system setup ..."${COLDEFAULT} |
71 | |
72 | # get the modules settings |
73 | # ! is the first thing that must be configured ! |
74 | config_modules |
75 | |
76 | # imports network settings from db |
77 | config_networking |
78 | |
79 | # imports x11 settings from db |
80 | config_x11 |
81 | |
82 | # imports session settings from db |
83 | config_sessions |
84 | |
85 | # imports printer settings from db |
86 | config_printing |
87 | |
88 | # imports auth settings from db |
89 | config_auth |
90 | |
91 | # exchange ssh rsa keys |
92 | HOME=/root config_ssh_auth |
93 | |
94 | # import version info |
95 | config_version |
96 | } |
97 | |
98 | get_system_serial() |
99 | { |
100 | local CUR_IP CUR_MAC CUR_MTIME ALX_IFACE |
101 | |
102 | if [[ ${ALX_CONFD_NETWORKING} = true ]] |
103 | then |
104 | ALX_IFACE="$(< ${SETTINGSPATH}/confd-networking)" |
105 | else |
106 | ALX_IFACE="eth0" |
107 | fi |
108 | |
109 | # check if serial file exists |
110 | if [ -f /etc/alxconfig-ng/serial ] && [[ ${ALX_FORCED_RECHECK} = false ]] |
111 | then |
112 | source /etc/alxconfig-ng/serial |
113 | |
114 | # start preliminary networking (dhcp) |
115 | preliminary_network start |
116 | |
117 | # check if mysql server is reachable |
118 | # if not abort this script |
119 | if ! reach_mysql_server |
120 | then |
121 | preliminary_network stop |
122 | exit 1 |
123 | fi |
124 | |
125 | CUR_IP=$(ifconfig ${ALX_IFACE} | sed -n '/addr:/s/ [^r]*..//gp') |
126 | CUR_MAC=$(ifconfig ${ALX_IFACE} | grep HWaddr | cut -d ' ' -f11) |
127 | CUR_MTIME=$(date +%s) |
128 | |
129 | echo -e ${COLOREDSTAR} "Trying to validate my serial ..." |
130 | |
131 | # nice serial output |
132 | $CURS_UP |
133 | $SET_WCOL |
134 | echo "[ SN: ${ALX_SERIAL} ]" |
135 | |
136 | if validate_serial "${ALX_SERIAL}" "${ALX_REG_DATE}" "${CUR_MAC}" |
137 | then |
138 | ALX_STATE="ok" |
139 | else |
140 | # abort on non valid serial |
141 | ALX_STATE="invalid serial" |
142 | echo "ALX_STATE=\"${ALX_STATE}\"" > /etc/alxconfig-ng/state/state |
143 | show_invalid_serial_msg |
144 | exit 1 |
145 | fi |
146 | |
147 | else |
148 | # run hardware detection |
149 | echo |
150 | if [[ ${ALX_FORCED_RECHECK} = true ]] |
151 | then |
152 | echo -e ${COLMAGENTA}"Hardware autodetection forced by system-administrator"${COLDEFAULT} |
153 | # always disable CONFD_NETWORKING here |
154 | export ALX_CONFD_NETWORKING="false" |
155 | else |
156 | echo -e ${COLMAGENTA}"Preparing system for first boot"${COLDEFAULT} |
157 | fi |
158 | ALX_HW_DETECT=true |
159 | hwsetup |
160 | |
161 | # set hostname to alx_default_hostname |
162 | # use old hostname if this is a forced re-check |
163 | [[ ${ALX_FORCED_RECHECK} = true ]] && ALX_DEFAULT_HOSTNAME="$(< /etc/hostname)" |
164 | [ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx |
165 | HOSTNAME="${ALX_DEFAULT_HOSTNAME}" |
166 | |
167 | # update the hostname on the system for sure |
168 | echo "${HOSTNAME}" > /etc/hostname |
169 | |
170 | # start preliminary networking (dhcp) |
171 | preliminary_network start |
172 | |
173 | # check if mysql server is reachable |
174 | # if not abort this script |
175 | if ! reach_mysql_server |
176 | then |
177 | preliminary_network stop |
178 | exit 1 |
179 | fi |
180 | |
181 | |
182 | CUR_IP=$(/sbin/ifconfig eth0 | sed -n '/addr:/s/ [^r]*..//gp') |
183 | CUR_MAC=$(/sbin/ifconfig eth0 | grep HWaddr | cut -d ' ' -f11) |
184 | CUR_MTIME=$(date +%s) |
185 | |
186 | # abort now if this is a forced re-check |
187 | if [[ ${ALX_FORCED_RECHECK} = true ]] |
188 | then |
189 | # but first check the serial |
190 | source /etc/alxconfig-ng/serial |
191 | |
192 | echo -e ${COLOREDSTAR} "Trying to validate my serial ..." |
193 | |
194 | # nice serial output |
195 | $CURS_UP |
196 | $SET_WCOL |
197 | echo "[ SN: ${ALX_SERIAL} ]" |
198 | |
199 | if validate_serial "${ALX_SERIAL}" "${ALX_REG_DATE}" "${CUR_MAC}" |
200 | then |
201 | ALX_STATE="ok" |
202 | else |
203 | # abort on non valid serial |
204 | ALX_STATE="invalid serial" |
205 | echo "ALX_STATE=${ALX_STATE}" > /etc/alxconfig-ng/state/state |
206 | show_invalid_serial_msg |
207 | exit 1 |
208 | fi |
209 | |
210 | # write current state to temp file |
211 | echo "ALX_STATE=\"${ALX_STATE}\"" > /etc/alxconfig-ng/state/state |
212 | [ -f /hardware-auto-detection ] && rm /hardware-auto-detection |
213 | |
214 | # now export ALX_FORCED_RECHECK=true |
215 | # that the setting will be updated not inserted ! |
216 | export ALX_FORCED_RECHECK=true |
217 | return 0 |
218 | fi |
219 | |
220 | echo -e ${COLOREDSTAR} "Trying to get new serial ..." |
221 | |
222 | # request a new serial; one command now (cause must be done in the same session) |
223 | ALX_SERIAL=$(mysqldo "insert into client_serials (mtime, mac) values('${CUR_MTIME}','${CUR_MAC}'); |
224 | select last_insert_id();") |
225 | |
226 | if [[ ${ALX_SERIAL} != NULL ]] |
227 | then |
228 | # nice serial output |
229 | $CURS_UP |
230 | $SET_WCOL |
231 | echo "[ SN: ${ALX_SERIAL} ]" |
232 | |
233 | # set ALX_STATE to ok so everybody knows that everything was ok |
234 | ALX_STATE=ok |
235 | |
236 | echo "ALX_SERIAL=\"${ALX_SERIAL}\"" > /etc/alxconfig-ng/serial |
237 | echo "ALX_REG_DATE=\"${CUR_MTIME}\"" >> /etc/alxconfig-ng/serial |
238 | |
239 | evaluate_retval |
240 | else |
241 | # print false (works only if this is the first statement here) |
242 | evaluate_retval |
243 | |
244 | # set ALX_STATE to error so everybody sees there was an error |
245 | ALX_STATE=error |
246 | |
247 | # show an error that no new serial was found |
248 | # nice serial output |
249 | $CURS_UP |
250 | $SET_WCOL |
251 | echo -e "[ SN: ${COLRED}None, 0${COLDEFAULT} ]" |
252 | fi |
253 | fi |
254 | |
255 | # write current state to temp file |
256 | echo "ALX_STATE=\"${ALX_STATE}\"" > /etc/alxconfig-ng/state/state |
257 | echo "ALX_IFACE=\"${ALX_IFACE}\"" >> /etc/alxconfig-ng/state/state |
258 | } |
259 | |
260 | |
261 | check_is_configured() |
262 | { |
263 | if [ -f /etc/alxconfig-ng/state/configured ] |
264 | then |
265 | export ALX_CONFIGURED=true |
266 | else |
267 | export ALX_CONFIGURED=false |
268 | fi |
269 | } |
270 | |
271 | |
272 | # imports current settings to the database resolved by the hardware detection |
273 | import_settings_to_db() |
274 | { |
275 | # note: networking is always 'dhcp' if hw was autodetected |
276 | # note: default_domain/hostname is set in config.rc |
277 | |
278 | # to be safe, we do some sanity checks |
279 | [ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain |
280 | [ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx |
281 | |
282 | # vars used by hwsetup |
283 | local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME |
284 | local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER |
285 | local MOUSETYPE XMOUSETYPE FULLNAME DEVICE |
286 | |
287 | # get setting from hwsetup |
288 | source /etc/conf.d/hwsetup/knoppix |
289 | source /etc/conf.d/hwsetup/mouse |
290 | |
291 | echo |
292 | echo -e ${COLMAGENTA}"Importing detected settings to database"${COLDEFAULT} |
293 | |
294 | # network |
295 | echo -e " Network settings ..." |
296 | if [[ ${ALX_CONFD_NETWORKING} = true ]] |
297 | then |
298 | # get settings |
299 | #source ${rc_base}/init.d/network &> /dev/null |
300 | for iface in $(onboot_interface_list ${network_settings}/net.*) |
301 | do |
302 | [[ $(< ${SETTINGSPATH}/confd-networking) != ${iface} ]] && continue |
303 | echo "WARNING: only importing settings for interface [ ${iface} ] !" |
304 | source ${network_settings}/net.${iface} || exit 1 |
305 | NETCARD_DRIVER="$(cat /etc/modprobe.d/net.${iface}.conf | cut -d' ' -f3)" |
306 | |
307 | mysqldo "insert into cfg_network( |
308 | hostname, |
309 | serial, |
310 | module, |
311 | domain, |
312 | networking, |
313 | netmask, |
314 | dns, |
315 | gateway, |
316 | broadcast, |
317 | ip, |
318 | forcemacto, |
319 | wireless_bitrate, |
320 | wireless_channel, |
321 | wireless_essid, |
322 | wireless_frequency, |
323 | wireless_mode, |
324 | wireless_nick, |
325 | wireless_auth_mode, |
326 | wireless_key_length, |
327 | wireless_key, |
328 | wireless_key_ascii |
329 | ) |
330 | values( |
331 | '${ALX_DEFAULT_HOSTNAME}', |
332 | '${ALX_SERIAL}', |
333 | '${NETCARD_DRIVER}', |
334 | '${ALX_DEFAULT_DOMAIN}', |
335 | '${NETWORKING}', |
336 | '${NETMASK}', |
337 | '${NAMESERVER}', |
338 | '${GATEWAY}', |
339 | '${BROADCAST}', |
340 | '${IP}', |
341 | '${FORCE_MAC_TO}', |
342 | '${WIRELESS_BITRATE}', |
343 | '${WIRELESS_CHANNEL}', |
344 | '${WIRELESS_ESSID}', |
345 | '${WIRELESS_FREQUENCY}', |
346 | '${WIRELESS_MODE}', |
347 | '${WIRELESS_NICK}', |
348 | '${WIRELESS_AUTH_MODE}', |
349 | '${WIRELESS_KEY_LENGTH}', |
350 | '${WIRELESS_KEY}', |
351 | '${WIRELESS_KEY_ASCII}' |
352 | );" |
353 | |
354 | # only insert the *FIRST* iface |
355 | break |
356 | done |
357 | else |
358 | mysqldo "insert into cfg_network( |
359 | hostname, |
360 | serial, |
361 | module, |
362 | domain, |
363 | networking |
364 | ) |
365 | values( |
366 | '${ALX_DEFAULT_HOSTNAME}', |
367 | '${ALX_SERIAL}', |
368 | '${NETCARD_DRIVER}', |
369 | '${ALX_DEFAULT_DOMAIN}', |
370 | 'dhcp' |
371 | );" |
372 | fi |
373 | evaluate_retval |
374 | |
375 | # xserver |
376 | echo -e " Graphic settings ..." |
377 | # xserver general |
378 | ( mysqldo "insert into cfg_graphic( |
379 | serial, |
380 | module, |
381 | resolution, |
382 | depth, |
383 | refresh_rate |
384 | ) |
385 | values( |
386 | '${ALX_SERIAL}', |
387 | '${XMODULE}', |
388 | '1024x768', |
389 | '16', |
390 | '60' |
391 | );"; ) |
392 | evaluate_retval |
393 | |
394 | # input |
395 | echo -e " Input settings ..." |
396 | mysqldo "insert into cfg_input(serial,mouse) values('${ALX_SERIAL}','${XMOUSETYPE}');" |
397 | evaluate_retval |
398 | |
399 | # auth |
400 | echo -e " Authentification settings ..." |
401 | mysqldo "insert into client_auth( |
402 | serial, |
403 | username, |
404 | shell, |
405 | vnc, |
406 | samba, |
407 | station |
408 | ) |
409 | values( |
410 | '${ALX_SERIAL}', |
411 | '${ALX_UNPRIV_USER}', |
412 | '', |
413 | '', |
414 | '', |
415 | '' |
416 | );" |
417 | evaluate_retval |
418 | |
419 | # exchange ssh rsa keys - the first boot needs this ! |
420 | # or no reboot will work via the webadmin |
421 | echo -e " SSH authentification settings ..." |
422 | HOME=/root config_ssh_auth |
423 | evaluate_retval |
424 | |
425 | # autostart |
426 | echo -e " Autostart settings ..." |
427 | mysqldo "insert into cfg_autostart(serial,session) values('${ALX_SERIAL}','');" |
428 | |
429 | # screensaver |
430 | echo -e " Screensaver settings ..." |
431 | mysqldo "insert into cfg_screensaver(serial,screensaver) values('${ALX_SERIAL}','')" |
432 | |
433 | # version info |
434 | local alx_os |
435 | local alx_utils |
436 | alx_os="$(< /etc/mageversion)" |
437 | alx_utils="$(magequery -n alxconfig-ng-alx | sed 's:.*\[\ \(.*\)\ \].*:\1:')" |
438 | alx_utils="${alx_utils/alxconfig-ng-alx-}" |
439 | mysqldo "insert into client_version(serial,os,utils) values('${ALX_SERIAL}','${alx_os}','${alx_utils}')" |
440 | |
441 | evaluate_retval |
442 | } |
443 | |
444 | # imports current settings to the database resolved by the hardware detection |
445 | update_settings_in_db() |
446 | { |
447 | # note: networking is always 'dhcp' if hw was autodetected |
448 | # note: default_domain/hostname is set in config.rc or exported |
449 | # note: we updating only hardware settings here ! |
450 | |
451 | # to be safe, we do some sanity checks |
452 | [ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain |
453 | [ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx |
454 | |
455 | # vars used by hwsetup |
456 | local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME |
457 | local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER |
458 | local MOUSETYPE XMOUSETYPE FULLNAME DEVICE |
459 | |
460 | # get setting from hwsetup |
461 | source /etc/conf.d/hwsetup/knoppix |
462 | source /etc/conf.d/hwsetup/mouse |
463 | |
464 | echo |
465 | echo -e ${COLMAGENTA}"Updating detected settings in database"${COLDEFAULT} |
466 | |
467 | # network |
468 | echo -e " Network settings ..." |
469 | if [[ ${ALX_CONFD_NETWORKING} = true ]] |
470 | then |
471 | # get settings |
472 | #source ${rc_base}/init.d/network &> /dev/null |
473 | for iface in $(onboot_interface_list ${network_settings}/net.*) |
474 | do |
475 | [[ $(< ${SETTINGSPATH}/confd-networking) != ${iface} ]] && continue |
476 | echo "WARNING: only importing settings for interface [ ${iface} ] !" |
477 | source ${network_settings}/net.${iface} || exit 1 |
478 | NETCARD_DRIVER="$(cat /etc/modprobe.d/net.${iface}.conf | cut -d' ' -f3)" |
479 | |
480 | mysqldo "update cfg_network set |
481 | hostname='${ALX_DEFAULT_HOSTNAME}', |
482 | module='${NETCARD_DRIVER}', |
483 | domain='${ALX_DEFAULT_DOMAIN}', |
484 | networking='${NETWORKING}', |
485 | netmask='${NETMASK}', |
486 | dns='${NAMESERVER}', |
487 | gateway='${GATEWAY}', |
488 | broadcast='${BROADCAST}', |
489 | ip='${IP}', |
490 | forcemacto='${FORCE_MAC_TO}', |
491 | wireless_bitrate='${WIRELESS_BITRATE}', |
492 | wireless_channel='${WIRELESS_CHANNEL}', |
493 | wireless_essid='${WIRELESS_ESSID}', |
494 | wireless_frequency='${WIRELESS_FREQUENCY}', |
495 | wireless_mode='${WIRELESS_MODE}', |
496 | wireless_nick='${WIRELESS_NICK}', |
497 | wireless_auth_mode='${WIRELESS_AUTH_MODE}', |
498 | wireless_key_length='${WIRELESS_KEY_LENGTH}', |
499 | wireless_key='${WIRELESS_KEY}', |
500 | wireless_key_ascii='${WIRELESS_KEY_ASCII}' |
501 | where serial=${ALX_SERIAL};" |
502 | |
503 | # only insert the *FIRST* iface |
504 | break |
505 | done |
506 | else |
507 | mysqldo "update cfg_network set |
508 | hostname='${ALX_DEFAULT_HOSTNAME}', |
509 | module='${NETCARD_DRIVER}', |
510 | domain='${ALX_DEFAULT_DOMAIN}', |
511 | networking='dhcp' |
512 | where serial=${ALX_SERIAL};" |
513 | fi |
514 | evaluate_retval |
515 | |
516 | # xserver |
517 | echo -e " Graphic settings ..." |
518 | # xserver general |
519 | mysqldo "update cfg_graphic set |
520 | module='${XMODULE}', |
521 | resolution='1024x768', |
522 | depth='16', |
523 | refresh_rate='60' |
524 | where serial=${ALX_SERIAL};" |
525 | evaluate_retval |
526 | |
527 | # input |
528 | echo -e " Input settings ..." |
529 | mysqldo "update cfg_input set mouse='${XMOUSETYPE}' where serial=${ALX_SERIAL};" |
530 | evaluate_retval |
531 | |
532 | # version info |
533 | local alx_os |
534 | local alx_utils |
535 | alx_os="$(< /etc/mageversion)" |
536 | alx_utils="$(magequery -n alxconfig-ng-alx | sed 's:.*\[\ \(.*\)\ \].*:\1:')" |
537 | alx_utils="${alx_utils/alxconfig-ng-alx-}" |
538 | mysqldo "update client_version set os='${alx_os}', utils='${alx_utils}' where serial=${ALX_SERIAL};" |
539 | } |
540 | |
541 | # imports current settings to the local system resolved by the hardware detection |
542 | # we only need the network settings |
543 | import_settings_local() |
544 | { |
545 | # note: networking is always 'dhcp' if hw was autodetected |
546 | # note: default_domain/hostname is set in config.rc |
547 | |
548 | # to be safe, we do some sanity checks |
549 | [ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain |
550 | [ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx |
551 | |
552 | # vars used by hwsetup |
553 | local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME |
554 | local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER |
555 | local MOUSETYPE XMOUSETYPE FULLNAME DEVICE |
556 | |
557 | # get setting from hwsetup |
558 | source /etc/conf.d/hwsetup/knoppix |
559 | |
560 | echo |
561 | echo -e ${COLMAGENTA}"Importing detected settings to local system"${COLDEFAULT} |
562 | |
563 | if [[ ${ALX_CONFD_NETWORKING} = false ]] |
564 | then |
565 | # set an device alias for modprobe.conf |
566 | [ ! -d /etc/modprobe.d ] && install -d /etc/modprobe.d |
567 | echo "alias eth0 ${NETCARD_DRIVER}" > /etc/modprobe.d/net.eth0.conf |
568 | |
569 | # regenerate modprobe.conf |
570 | [ -x $(which modules-update) ] && modules-update || echo "cannot regen modprobe.conf" |
571 | evaluate_retval |
572 | fi |
573 | |
574 | # set system state to 'already configured' |
575 | touch /etc/alxconfig-ng/state/configured |
576 | |
577 | # install slim desktopmanager configuration |
578 | config_display_manager |
579 | |
580 | # if only an recheck was forced than abort now |
581 | [[ ${ALX_FORCED_RECHECK} = true ]] && return 0 |
582 | |
583 | # create a fresh fluxbox directory |
584 | [ -d ${ALX_UNPRIV_HOME}/.fluxbox ] && rm -rf ${ALX_UNPRIV_HOME}/.fluxbox |
585 | install -d ${ALX_UNPRIV_HOME}/.fluxbox |
586 | |
587 | # now generate fluxbox config files |
588 | |
589 | # fluxbox main config |
590 | cat ${ALX_SKELETONS}/fluxbox/init > ${ALX_UNPRIV_HOME}/.fluxbox/init |
591 | |
592 | # fluxbox autostart |
593 | cat ${ALX_SKELETONS}/fluxbox/apps > ${ALX_UNPRIV_HOME}/.fluxbox/apps |
594 | |
595 | # fluxbox menu header |
596 | cat ${ALX_SKELETONS}/fluxbox/menu.header > ${ALX_UNPRIV_HOME}/.fluxbox/menu |
597 | |
598 | # now fix it with proper messages :P |
599 | local ver="$(< /etc/mageversion)" |
600 | sed -i "s:@CHANGEME@:alx-${ver} #${ALX_SERIAL}:g" ${ALX_UNPRIV_HOME}/.fluxbox/menu |
601 | |
602 | # add a newline (maybe there is no crlf in the header) |
603 | echo >> ${ALX_UNPRIV_HOME}/.fluxbox/menu |
604 | |
605 | # fluxbox menu footer |
606 | cat ${ALX_SKELETONS}/fluxbox/menu.footer >> ${ALX_UNPRIV_HOME}/.fluxbox/menu |
607 | |
608 | # add a newline (maybe there is no crlf in the footer) |
609 | echo >> ${ALX_UNPRIV_HOME}/.fluxbox/menu |
610 | |
611 | |
612 | # setup some standart icons (sysinfo.lnk) |
613 | # basic config |
614 | cat ${ALX_SKELETONS}/xtdesktop/xtdeskrc > ${ALX_UNPRIV_HOME}/.xtdeskrc |
615 | |
616 | # clean desktop icon location |
617 | [ -d ${ALX_UNPRIV_HOME}/.xtdesktop ] && rm -rf ${ALX_UNPRIV_HOME}/.xtdesktop |
618 | install -d ${ALX_UNPRIV_HOME}/.xtdesktop |
619 | |
620 | # last but not least gen a icon with some sys informations |
621 | local sysinfo |
622 | local osversion |
623 | local xres |
624 | local yres |
625 | |
626 | osversion="$(< /etc/mageversion)" |
627 | sysinfo="Hostname: ${ALX_DEFAULT_HOSTNAME} Serial: #${ALX_SERIAL} OS: alx-${osversion} Kernel: $(uname -r)" |
628 | |
629 | # at first boot we got always a resolution of 1024x768-16@60 |
630 | # middle of the screen |
631 | # (no txt - length required, xtdesk manage that itself) |
632 | xres="$((1024 / 2))" |
633 | # default y pos (full yres -22 !) |
634 | yres="$((768 - 22 ))" |
635 | |
636 | generate_icon \ |
637 | --name "${sysinfo}" \ |
638 | --command "exit 0" \ |
639 | --icon "${ALX_SESSIONS_ICONS}/sysinfo.png" \ |
640 | --dest "${ALX_UNPRIV_HOME}/.xtdesktop/sysinfo.lnk" \ |
641 | --xres "${xres}" \ |
642 | --yres "${yres}" \ |
643 | --icon-width "1" \ |
644 | --icon-height "1" |
645 | |
646 | # create a xinitrc |
647 | echo "exec startfluxbox" > ${ALX_UNPRIV_HOME}/.xinitrc |
648 | |
649 | # set correct permissions |
650 | chown ${ALX_UNPRIV_USER}:${ALX_UNPRIV_GROUP} ${ALX_UNPRIV_HOME} |
651 | chown ${ALX_UNPRIV_USER}:${ALX_UNPRIV_GROUP} ${ALX_UNPRIV_HOME}/.fluxbox |
652 | chmod 0755 ${ALX_UNPRIV_HOME}/.fluxbox |
653 | chmod 0755 ${ALX_UNPRIV_HOME}/.xtdesktop |
654 | chmod 0644 ${ALX_UNPRIV_HOME}/.xtdeskrc |
655 | chmod 0644 ${ALX_UNPRIV_HOME}/.xinitrc |
656 | } |
657 | |
658 | # start|stop |
659 | preliminary_network() |
660 | { |
661 | local module |
662 | |
663 | if [ -f /etc/alxconfig-ng/state/configured ] |
664 | then |
665 | # compat for old clients |
666 | if [ -f ${SETTINGSPATH}/modules ] |
667 | then |
668 | # get module name |
669 | module=$(cat ${SETTINGSPATH}/modules) |
670 | modprobe ${module} |
671 | fi |
672 | |
673 | else |
674 | # vars used by hwsetup |
675 | local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME |
676 | local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER |
677 | |
678 | # get setting from hwsetup |
679 | source /etc/conf.d/hwsetup/knoppix |
680 | modprobe ${NETCARD_DRIVER} |
681 | fi |
682 | |
683 | case $1 in |
684 | start) |
685 | # keeping like always safe: |
686 | # no network should be startet here, |
687 | # so we can delete all pid files if one exists |
688 | if [[ ! -z $(pidof udhcpc) ]] |
689 | then |
690 | echo -e ${COLMAGENTA}"Forcing network down"${COLDEFAULT} |
691 | killall udhcpc &> /dev/null |
692 | sleep 1 |
693 | fi |
694 | [[ ${ALX_CONFD_NETWORKING} = true ]] && ${rc_base}/init.d/network stop |
695 | |
696 | echo -e ${COLMAGENTA}"Starting preliminary networking ... "${COLDEFAULT} |
697 | |
698 | # start network configured from /etc/conf.d |
699 | if [[ ${ALX_CONFD_NETWORKING} = true ]] |
700 | then |
701 | ${rc_base}/init.d/network start |
702 | else |
703 | echo -e ${COLOREDSTAR}"Starting default dhcp based networking ... "${COLDEFAULT} |
704 | # -t 10 timeout of 10 secs |
705 | udhcpc -t 10 &> /dev/null |
706 | evaluate_retval |
707 | fi |
708 | ;; |
709 | |
710 | stop) |
711 | echo -e ${COLMAGENTA}"Stopping preliminary networking ... "${COLDEFAULT} |
712 | if [[ ${ALX_CONFD_NETWORKING} = true ]] |
713 | then |
714 | ${rc_base}/init.d/network stop |
715 | else |
716 | echo -e ${COLOREDSTAR}"Stopping default dhcp based networking ... "${COLDEFAULT} |
717 | ifconfig eth0 down |
718 | fi |
719 | if [[ ! -z $(pidof udhcpc) ]] |
720 | then |
721 | killall udhcpc &> /dev/null |
722 | sleep 1 |
723 | fi |
724 | evaluate_retval |
725 | ;; |
726 | |
727 | *) |
728 | echo "Usage: preliminary_network {start|stop}" |
729 | ;; |
730 | esac |
731 | } |
732 | |
733 | reset_system_settings() |
734 | { |
735 | # force load of de kbdkeys |
736 | loadkeys -q de |
737 | echo |
738 | echo -en ${COLRED} |
739 | echo -n "*** Warning: you are about to reset *all* local settings on this system!" |
740 | echo -e ${COLDEFAULT} |
741 | echo "*** Do you really want to continue ?" |
742 | echo -n "*** Enter 'yes' to continue, anything else to abort: " |
743 | read kbinsert |
744 | if [[ ${kbinsert} = yes ]] |
745 | then |
746 | echo -en ${COLRED} |
747 | echo -n "*** OK, you really want it ... killing all settings: " |
748 | for i in 3 2 1 now |
749 | do |
750 | echo -n " ${i}" |
751 | sleep 1 |
752 | done |
753 | echo -e ${COLDEFAULT} |
754 | |
755 | ## reset all settings: |
756 | rm -rf ${SETTINGSPATH}/* |
757 | rm -f /etc/alxconfig-ng/serial |
758 | rm -rf /etc/alxconfig-ng/state |
759 | |
760 | # clear all printers & net-shares |
761 | :> /etc/printcap |
762 | |
763 | # remove lprng |
764 | rc-config del lprng &> /dev/null |
765 | |
766 | # remove all user settings |
767 | [ -d ${ALX_UNPRIV_HOME} ] && rm -rf ${ALX_UNPRIV_HOME} |
768 | |
769 | # remove all ica-sessions |
770 | find ${ALX_ICA_SESSIONS} -type f -name '*.ica' | xargs rm |
771 | |
772 | # remove all old nics and modules configs |
773 | find /etc/conf.d -type f -name 'net.*' | xargs rm |
774 | find /etc/modprobe.d -type f -name 'net.*' | xargs rm |
775 | |
776 | # restore default networking |
777 | cat ${ALX_SKELETONS}/net/net.eth0 > /etc/conf.d/net.eth0 |
778 | |
779 | echo "I am done now, press [Enter] to reboot system ..." |
780 | else |
781 | echo "Aborted, press [Enter] to reboot system ..." |
782 | fi |
783 | read |
784 | reboot |
785 | } |
786 | |
787 | onboot_interface_list() |
788 | { |
789 | local file |
790 | local devices |
791 | local iface |
792 | |
793 | # get list of all devices |
794 | for file in $@ |
795 | do |
796 | if [[ $(read_value ONBOOT ${file}) = yes ]] |
797 | then |
798 | iface="$(basename ${file} | sed s/net.//)" |
799 | # exclude backup files |
800 | case "${iface}" in |
801 | *~) ;; |
802 | *) devices="${devices} $(basename ${file} | sed s/net.//)" ;; |
803 | esac |
804 | fi |
805 | done |
806 | |
807 | echo "${devices}" |
808 | } |
809 | |
810 | # read values from net.* files |
811 | read_value() |
812 | { |
813 | local var="$1" |
814 | local file="$2" |
815 | local value |
816 | |
817 | # local all possible vars |
818 | # global |
819 | local ONBOOT |
820 | local NETWORKING |
821 | |
822 | # static |
823 | local IP |
824 | local NETMASK |
825 | local BROADCAST |
826 | local NETWORKING |
827 | local FORCE_MAC_TO |
828 | |
829 | # dhcp |
830 | local DHCP_PROG |
831 | local DHCP_START |
832 | local DHCP_STOP |
833 | |
834 | # default gw |
835 | local GATEWAY |
836 | local GATEWAY_IF |
837 | |
838 | # wireless extensions |
839 | local WIRELESS_AP |
840 | local WIRELESS_AUTH_MODE |
841 | local WIRELESS_BITRATE |
842 | local WIRELESS_CHANNEL |
843 | local WIRELESS_DEFAULT_KEY |
844 | local WIRELESS_ESSID |
845 | local WIRELESS_FREQUENCY |
846 | local WIRELESS_KEY |
847 | local WIRELESS_KEY_ASCII |
848 | local WIRELESS_KEY_0 |
849 | local WIRELESS_KEY_1 |
850 | local WIRELESS_KEY_2 |
851 | local WIRELESS_KEY_3 |
852 | local WIRELESS_KEY_LENGTH |
853 | local WIRELESS_MODE |
854 | local WIRELESS_NICK |
855 | local WIRELESS_NWID |
856 | local WIRELESS_POWER |
857 | |
858 | source ${file} |
859 | eval value=\$$(echo ${var}) |
860 | echo "${value}" |
861 | } |
862 | |
863 | case $1 in |
864 | start) |
865 | # check for global overrides |
866 | [ -f ${SETTINGSPATH}/confd-networking ] && ALX_CONFD_NETWORKING=true |
867 | [ -f /hardware-auto-detection ] && ALX_FORCED_RECHECK=true |
868 | read_cmdline hardware-auto-detection && ALX_FORCED_RECHECK=true |
869 | read_cmdline alx-reset-settings && ALX_RESET_SETTINGS=true |
870 | |
871 | # kill all settings if requested |
872 | if [[ ${ALX_RESET_SETTINGS} = true ]] |
873 | then |
874 | reset_system_settings |
875 | fi |
876 | |
877 | # retrieve or validate current serial |
878 | get_system_serial |
879 | if [[ ${ALX_HW_DETECT} = true ]] |
880 | then |
881 | if [[ ${ALX_FORCED_RECHECK} = true ]] |
882 | then |
883 | update_settings_in_db |
884 | else |
885 | import_settings_to_db |
886 | fi |
887 | import_settings_local |
888 | |
889 | # here we should also exchange the ssh keys |
890 | # or the system cannot be rebooted after |
891 | # the first start via the alx-webadmin |
892 | config_ssh_auth |
893 | fi |
894 | |
895 | # now setup system configuration |
896 | # alx_setup_or_whatever_it_will_be_called() |
897 | [[ ${ALX_HW_DETECT} = false ]] && update_system_settings |
898 | |
899 | # stop at last the preliminary networking (dhcp) |
900 | preliminary_network stop |
901 | ;; |
902 | |
903 | stop) |
904 | # unset_alx_connected #--> now in alxsetstate-rc6 |
905 | # ! important !: del systemstate |
906 | [ -f /etc/alxconfig-ng/state/state ] && rm /etc/alxconfig-ng/state/state |
907 | sleep 0.1 |
908 | ;; |
909 | |
910 | *) |
911 | echo "Usage: $0 {start|stop} ..." |
912 | ;; |
913 | esac |
914 |
Properties
Name | Value |
---|---|
svn:executable | * |