Magellan Linux

  • Back to homepage
    • /[alx-svn]/alx-src/branches/alxconf-060/init.d/alxsettings

    Diff of /alx-src/branches/alxconf-060/init.d/alxsettings

    Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

    alx-src/trunk/alxconfig-ng/init.d/alxsettings revision 227 by niro, Wed Mar 9 00:04:23 2005 UTC alx-src/branches/alxconf-060/init.d/alxsettings revision 4834 by niro, Mon May 13 11:12:37 2013 UTC
    # Line 1  Line 1 
    1  #!/bin/bash  #!/bin/bash
    2    # $Id$
    3  # <niro@magellan-linux.de>  # <niro@magellan-linux.de>
    4    
    5  #%rlevels: 7:s 0:k 6:k  #%rlevels: 7:s 0:k
    6  #%start: 41  #%start: 41
    7  #%stop: 01  #%stop: 01
    8    
    # Line 11  Line 11 
    11  #%before:  #%before:
    12  #%after:  #%after:
    13    
     # $Header: /home/cvsd/alx-cvs/alx-src/alxconfig-ng/init.d/alxsettings,v 1.3 2005-03-09 00:04:23 niro Exp $  
       
    14  # checks first if the client was already configured and if it has an valid serial  # checks first if the client was already configured and if it has an valid serial
    15  # if not it runs the autoconfiguration script  # if not it runs the autoconfiguration script
    16  # these settings will be used for client setup  # these settings will be used for client setup
    # Line 21  Line 19 
    19  # if no changes are at server side they will be kept, if yes the get updated.  # if no changes are at server side they will be kept, if yes the get updated.
    20  # the server settings has higher priority.  # the server settings has higher priority.
    21    
    22  source /etc/sysconfig/rc  source /etc/conf.d/rc
    23  source $rc_functions  source $rc_functions
    24    
    25  #mysql settings  # mysql settings
    26  source /etc/alxconfig-ng/config.rc  source /etc/alxconfig-ng/config.rc
     source /usr/lib/alxconfig-ng/functions/mysqlfunctions  
     source /usr/lib/alxconfig-ng/functions/serial_functions  
     source /usr/lib/alxconfig-ng/functions/config_network  
     source /usr/lib/alxconfig-ng/functions/config_printers  
     source /usr/lib/alxconfig-ng/functions/config_x11  
    27    
    28  #check if mysql is available  # helper functions
    29  [ -x /usr/bin/mysql ] && MYSQL_ALX=true  source ${ALX_FUNCTIONS}/common
    30    source ${ALX_FUNCTIONS}/mysqlfunctions
    31    source ${ALX_FUNCTIONS}/serial_functions
    32    source ${ALX_FUNCTIONS}/config_modules
    33    source ${ALX_FUNCTIONS}/config_plugins
    34    source ${ALX_FUNCTIONS}/config_network
    35    source ${ALX_FUNCTIONS}/config_printers
    36    source ${ALX_FUNCTIONS}/config_sessions
    37    source ${ALX_FUNCTIONS}/config_x11
    38    source ${ALX_FUNCTIONS}/config_auth
    39    source ${ALX_FUNCTIONS}/config_ssh_auth
    40    source ${ALX_FUNCTIONS}/config_versions
    41    
    42  #other needed vars  # other needed vars
    43  ALX_HW_DETECT=false  ALX_HW_DETECT=false
    44    ALX_FORCED_RECHECK=false
    45    ALX_RESET_SETTINGS=false
    46    ALX_CONFD_NETWORKING=false
    47    
    48  #unset vars which may kill us  # unset vars which may kill us
    49  unset ALX_SERIAL ALX_STATE  unset ALX_SERIAL ALX_STATE
    50    
    51    
    52  #setup needed directories  # setup needed directories
    53  [ ! -d /etc/alxconfig-ng/state ] && install -d /etc/alxconfig-ng/state  [ ! -d /etc/alxconfig-ng/state ] && install -d /etc/alxconfig-ng/state
    54    
    55    update_system_settings()
    56    {
    57     rc_mecho Checking system setup ...
    58    
    59     # get the modules settings
    60     # ! is the first thing that must be configured !
    61     config_modules
    62    
    63  validate_sessions(){   # install or uninstall plugins
    64     config_plugins
      local x i all LOCAL_SESSIONS DB_SESSIONS SETTINGSPATH count  
       
      #all arrays:  
      # ->  session1 session2 ... sessionN  
       
       
      #no LOCAL_SESSIONS here, needs bubblesort  
       
      #get settings from database  
      all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \  
      "select session from cfg_sessions where serial='${ALX_SERIAL}'")  
       
      #split'em up and put in an array (only if $all not zero)  
      declare -i i=0  
      if [ -n "${all}" ]  
      then  
      for x in ${all}  
      do  
      DB_SESSIONS[${i}]=${x}  
      ((i++))  
      done  
      count=${i}  
      else  
      count=0  
      fi  
       
      ## no compare here, can only done with bubblesort or s.th like that  
      # shows only the new sessions  
      declare -i i=0  
      #count=${#DB_SESSIONS[*]} #---> not working gets always 1, why ?  
       
      echo "Number of new sessions: ${count}"  
      for ((i=0; i < count; i++))  
      do  
      echo "${i} - ${DB_SESSIONS[${i}]}"  
      done  
       
      #update local configs  
      SETTINGSPATH=${SETTINGS_TEMPLATE}/menu  
      declare -i i=0  
       
      #count=${#DB_SESSIONS[*]}  
       
      if [ ${count} -gt 0 ]  
      then  
      #create directory if not exist  
      [ ! -d ${SETTINGSPATH}/sessions ] && install -d ${SETTINGSPATH}/sessions  
       
      #delete old sessions  
      echo -n > ${SETTINGSPATH}/sessions/sessions  
       
      for ((i=0; i < count; i++))  
      do  
      echo "${DB_SESSIONS[${i}]}" >> ${SETTINGSPATH}/sessions/sessions  
      done  
       
      #set update flag  
      ALX_SESSION_SETUP=true  
      fi  
     }  
       
       
     update_system_settings(){  
      echo -e ${COLMAGENTA}"Checking system setup ..."${COLDEFAULT}  
    65    
    66   # imports network settings from db   # imports network settings from db
    67   config_networking   config_networking
    # Line 119  update_system_settings(){ Line 69  update_system_settings(){
    69   # imports x11 settings from db   # imports x11 settings from db
    70   config_x11   config_x11
    71    
    72   #echo   # imports session settings from db
    73   #echo "sessions"   config_sessions
      #validate_sessions  
      #echo  
    74    
    75   # imports printer settings from db   # imports printer settings from db
    76   config_printing   config_printing
    77    
    78     # imports auth settings from db
    79     config_auth
    80    
    81     # exchange ssh rsa keys
    82     HOME=/root config_ssh_auth
    83    
    84     # import version info
    85     config_version
    86  }  }
    87    
    88  get_system_serial(){  get_system_serial()
    89    {
    90     # never declare ALX_IFACE as a local variable! ->fixme!
    91     local CUR_IP CUR_MAC CUR_MTIME CONFIG
    92    
    93   local CUR_IP CUR_MAC CUR_MTIME   if [[ ${ALX_CONFD_NETWORKING} = true ]]
    94     then
    95     ALX_IFACE="$(< ${SETTINGSPATH}/confd-networking)"
    96     else
    97     ALX_IFACE="eth0"
    98     fi
    99    
    100   #check if serial file exists   # check if serial file exists
    101   if [ -f /etc/alxconfig-ng/serial ]   if [ -f /etc/alxconfig-ng/serial ] && [[ ${ALX_FORCED_RECHECK} = false ]]
    102   then   then
    103   source /etc/alxconfig-ng/serial   source /etc/alxconfig-ng/serial
    104    
    105   # if system is already configured, it *has* a hostname.   # start preliminary networking (dhcp)
      # so we take the hostname of this system here  
      source /etc/hostname  
       
      #start preliminary networking (dhcp)  
    106   preliminary_network start   preliminary_network start
    107    
    108   CUR_IP=$(/sbin/ifconfig eth0 | sed -n '/addr:/s/ [^r]*..//gp')   # check if mysql server is reachable
    109   CUR_MAC=$(/sbin/ifconfig eth0 | grep HWaddr | cut -d ' ' -f11)   # if not abort this script
    110     if ! reach_mysql_server
    111     then
    112     preliminary_network stop
    113     exit 1
    114     fi
    115    
    116     CUR_IP=$(ifconfig ${ALX_IFACE} | sed -n '/addr:/s/ [^r]*..//gp')
    117     CUR_MAC=$(ifconfig ${ALX_IFACE} | grep HWaddr | cut -d ' ' -f11)
    118   CUR_MTIME=$(date +%s)   CUR_MTIME=$(date +%s)
    119    
    120   echo -e ${COLOREDSTAR} "Trying to validate my serial ..."   rc_print "Trying to validate my serial ..."
    121    
    122   #nice serial output   # nice serial output
    123   $CURS_UP   $CURS_UP
    124   $SET_WCOL   $SET_WCOL
    125   echo "[ SN: ${ALX_SERIAL} ]"   rc_echo "[ SN: ${ALX_SERIAL} ]"
    126    
    127   if validate_serial "${ALX_SERIAL}" "${ALX_REG_DATE}" "${CUR_MAC}"   if validate_serial "${ALX_SERIAL}" "${ALX_REG_DATE}" "${CUR_MAC}"
    128   then   then
    129   ALX_STATE="ok"   ALX_STATE="ok"
    130   else   else
    131     # abort on non valid serial
    132   ALX_STATE="invalid serial"   ALX_STATE="invalid serial"
    133     CONFIG="/etc/alxconfig-ng/state/state"
    134     clearconfig
    135     addconfig "ALX_STATE=\"${ALX_STATE}\""
    136     show_invalid_serial_msg
    137     exit 1
    138   fi   fi
    139    
    140   else   else
    141   #run hardware detection   # run hardware detection
    142   echo   rc_echo
    143   echo -e ${COLMAGENTA}"Preparing system for first boot"${COLDEFAULT}   if [[ ${ALX_FORCED_RECHECK} = true ]]
    144     then
    145     rc_mecho "Hardware autodetection forced by system-administrator"
    146     # always disable CONFD_NETWORKING here
    147     export ALX_CONFD_NETWORKING="false"
    148     else
    149     rc_mecho "Preparing system for first boot"
    150     fi
    151   ALX_HW_DETECT=true   ALX_HW_DETECT=true
    152   /etc/init.d/hwdetect start   hwsetup
    153    
    154   #set hostname to alx_default_hostname   # set hostname to alx_default_hostname
    155     # use old hostname if this is a forced re-check
    156     [[ ${ALX_FORCED_RECHECK} = true ]] && ALX_DEFAULT_HOSTNAME="$(< /etc/hostname)"
    157   [ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx   [ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx
    158   HOSTNAME="${ALX_DEFAULT_HOSTNAME}"   HOSTNAME="${ALX_DEFAULT_HOSTNAME}"
    159    
    160   #update the hostname on the system for sure   # update the hostname on the system for sure
    161   echo "HOSTNAME=${HOSTNAME}" > /etc/hostname   CONFIG="/etc/hostname"
    162     clearconfig
    163     addconfig "${HOSTNAME}"
    164    
    165   #start preliminary networking (dhcp)   # start preliminary networking (dhcp)
    166   preliminary_network start   preliminary_network start
    167    
    168   CUR_IP=$(/sbin/ifconfig eth0 | sed -n '/addr:/s/ [^r]*..//gp')   # check if mysql server is reachable
    169   CUR_MAC=$(/sbin/ifconfig eth0 | grep HWaddr | cut -d ' ' -f11)   # if not abort this script
    170     if ! reach_mysql_server
    171     then
    172     preliminary_network stop
    173     exit 1
    174     fi
    175    
    176     CUR_IP=$(/sbin/ifconfig ${ALX_IFACE} | sed -n '/addr:/s/ [^r]*..//gp')
    177     CUR_MAC=$(/sbin/ifconfig ${ALX_IFACE} | grep HWaddr | cut -d ' ' -f11)
    178   CUR_MTIME=$(date +%s)   CUR_MTIME=$(date +%s)
    179    
    180   echo -e ${COLOREDSTAR} "Trying to get new serial ..."   # abort now if this is a forced re-check
    181     if [[ ${ALX_FORCED_RECHECK} = true ]]
    182     then
    183     # but first check the serial
    184     source /etc/alxconfig-ng/serial
    185    
    186   #request new serial   rc_print "Trying to validate my serial ..."
      #ALX_REG_DATE="$(date +%F)"  
    187    
    188   #we're using the mtime now (better for vaildating the serial)   # nice serial output
    189   mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \   $CURS_UP
    190   "insert into client_serials(   $SET_WCOL
    191   mtime,   rc_echo "[ SN: ${ALX_SERIAL} ]"
      mac  
      )  
      values(  
      '${CUR_MTIME}',  
      '${CUR_MAC}'  
      );"  
    192    
    193   #then validate and retrieve serial   if validate_serial "${ALX_SERIAL}" "${ALX_REG_DATE}" "${CUR_MAC}"
    194     then
    195     ALX_STATE="ok"
    196     else
    197     # abort on non valid serial
    198     ALX_STATE="invalid serial"
    199     CONFIG="/etc/alxconfig-ng/state/state"
    200     clearconfig
    201     addconfig "ALX_STATE=\"${ALX_STATE}\""
    202     show_invalid_serial_msg
    203     exit 1
    204     fi
    205    
    206   ### warning must be changed that only the LAST ID will be fetched,  ###   # write current state to temp file
    207   ### or you get error if the computer name and date are the same     ###   CONFIG="/etc/alxconfig-ng/state/state"
    208   ### you have more than one serial number then                       ###   clearconfig
    209     addconfig "ALX_STATE=\"${ALX_STATE}\""
    210     [ -f /hardware-auto-detection ] && rm /hardware-auto-detection
    211    
    212     # now export ALX_FORCED_RECHECK=true
    213     # that the setting will be updated not inserted !
    214     export ALX_FORCED_RECHECK=true
    215     return 0
    216     fi
    217    
    218     rc_print "Trying to get new serial ..."
    219    
    220   #select highest id only (added max)   # request a new serial; one command now (cause must be done in the same session)
    221   ALX_SERIAL=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \   ALX_SERIAL=$(mysqldo "insert into client_serials (mtime, mac) values('${CUR_MTIME}','${CUR_MAC}');
    222   "select max(serial) from client_serials where mtime='${CUR_MTIME}' and mac='${CUR_MAC}'")   select last_insert_id();")
    223    
    224   if [ "${ALX_SERIAL}" != NULL ]   if [[ ${ALX_SERIAL} != NULL ]]
    225   then   then
    226   #nice serial output   # nice serial output
    227   $CURS_UP   $CURS_UP
    228   $SET_WCOL   $SET_WCOL
    229   echo "[ SN: ${ALX_SERIAL} ]"   rc_echo "[ SN: ${ALX_SERIAL} ]"
    230    
    231   #set ALX_STATE to ok so everybody that everything was ok   # set ALX_STATE to ok so everybody knows that everything was ok
    232   ALX_STATE=ok   ALX_STATE=ok
    233    
    234   echo "ALX_SERIAL=${ALX_SERIAL}" > /etc/alxconfig-ng/serial   CONFIG="/etc/alxconfig-ng/serial"
    235   echo "ALX_REG_DATE=${CUR_MTIME}" >> /etc/alxconfig-ng/serial   clearconfig
    236     addconfig "ALX_SERIAL=\"${ALX_SERIAL}\""
    237     addconfig "ALX_REG_DATE=\"${CUR_MTIME}\""
    238    
    239   evaluate_retval   evaluate_retval
    240   else   else
    241   #print false (works only if this is the first statement here)   # print false (works only if this is the first statement here)
    242   evaluate_retval   evaluate_retval
    243    
    244   #set ALX_STATE to error so everybody sees there was an error   # set ALX_STATE to error so everybody sees there was an error
    245   ALX_STATE=error   ALX_STATE=error
    246    
    247   #show an error that no new serial was found   # show an error that no new serial was found
    248   #nice serial output   # nice serial output
    249   $CURS_UP   $CURS_UP
    250   $SET_WCOL   $SET_WCOL
    251   echo -e "[ SN: ${COLRED}None, 0${COLDEFAULT} ]"   rc_echo -e "[ SN: ${COLRED}None, 0${COLDEFAULT} ]"
    252   fi   fi
    253   fi   fi
    254    
    255   #write current state to temp file   # write current state to temp file
    256   echo "ALX_STATE=${ALX_STATE}" > /etc/alxconfig-ng/state/state   CONFIG="/etc/alxconfig-ng/state/state"
    257     clearconfig
    258     addconfig "ALX_STATE=\"${ALX_STATE}\""
    259     addconfig "ALX_IFACE=\"${ALX_IFACE}\""
    260  }  }
    261    
    262    
    263  check_is_configured() {  check_is_configured()
    264    {
    265   if [ -f /etc/alxconfig-ng/state/configured ]   if [ -f /etc/alxconfig-ng/state/configured ]
    266   then   then
    267   export ALX_CONFIGURED=true   export ALX_CONFIGURED=true
    # Line 254  check_is_configured() { Line 272  check_is_configured() {
    272    
    273    
    274  # imports current settings to the database resolved by the hardware detection  # imports current settings to the database resolved by the hardware detection
    275  import_settings_to_db() {  import_settings_to_db()
    276   #note: networking is always 'dhcp' if hw was autodetected  {
    277   #note: default_domain/hostname is set in config.rc   # note: networking is always 'dhcp' if hw was autodetected
    278     # note: default_domain/hostname is set in config.rc
    279   #to be safe, we do some sanity checks  
    280     # to be safe, we do some sanity checks
    281   [ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain   [ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain
    282   [ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx   [ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx
    283    
    284   #vars used by hwdetect   # vars used by hwsetup
    285   local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME   local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
    286   local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER   local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
    287   local MOUSETYPE XMOUSETYPE FULLNAME DEVICE   local MOUSETYPE XMOUSETYPE FULLNAME DEVICE
    288    
    289   #get setting from hwdetect   # get setting from hwsetup
    290   source /etc/sysconfig/hwsetup/knoppix   source /etc/conf.d/hwsetup/knoppix
    291   source /etc/sysconfig/hwsetup/mouse   source /etc/conf.d/hwsetup/mouse
    292    
    293   echo   rc_echo
    294   echo -e ${COLMAGENTA}"Importing detected settings to database"${COLDEFAULT}   rc_mecho "Importing detected settings to database"
    295    
    296   #network   # network
    297   echo -e "      Network settings ..."   rc_mecho "      Network settings ..."
    298   mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \   if [[ ${ALX_CONFD_NETWORKING} = true ]]
    299   "insert into cfg_network(   then
    300   hostname,   # get settings
    301   serial,   for iface in $(onboot_interface_list ${network_settings}/net.*)
    302   module,   do
    303   domain,   [[ $(< ${SETTINGSPATH}/confd-networking) != ${iface} ]] && continue
    304   networking   rc_echo "WARNING: only importing settings for interface [ ${iface} ] !"
    305   )   source ${network_settings}/net.${iface} || echo "Error: could not read '${network_settings}/net.${iface}'"
    306   values(   NETCARD_DRIVER="$(cat /etc/modprobe.d/net.${iface}.conf | cut -d' ' -f3)"
    307   '${ALX_DEFAULT_HOSTNAME}',  
    308   '${ALX_SERIAL}',   mysqldo "insert into cfg_network(
    309   '${NETCARD_DRIVER}',   hostname,
    310   '${ALX_DEFAULT_DOMAIN}',   serial,
    311   'dhcp'   module,
    312   );"   domain,
    313     networking,
    314     netmask,
    315     dns,
    316     gateway,
    317     broadcast,
    318     ip,
    319     forcemacto,
    320     wireless_bitrate,
    321     wireless_channel,
    322     wireless_essid,
    323     wireless_frequency,
    324     wireless_mode,
    325     wireless_nick,
    326     wireless_auth_mode,
    327     wireless_key_length,
    328     wireless_key,
    329     wireless_key_ascii
    330     )
    331     values(
    332     '${ALX_DEFAULT_HOSTNAME}',
    333     '${ALX_SERIAL}',
    334     '${NETCARD_DRIVER}',
    335     '${ALX_DEFAULT_DOMAIN}',
    336     '${NETWORKING}',
    337     '${NETMASK}',
    338     '${NAMESERVER}',
    339     '${GATEWAY}',
    340     '${BROADCAST}',
    341     '${IP}',
    342     '${FORCE_MAC_TO}',
    343     '${WIRELESS_BITRATE}',
    344     '${WIRELESS_CHANNEL}',
    345     '${WIRELESS_ESSID}',
    346     '${WIRELESS_FREQUENCY}',
    347     '${WIRELESS_MODE}',
    348     '${WIRELESS_NICK}',
    349     '${WIRELESS_AUTH_MODE}',
    350     '${WIRELESS_KEY_LENGTH}',
    351     '${WIRELESS_KEY}',
    352     '${WIRELESS_KEY_ASCII}'
    353     );"
    354    
    355     # only insert the *FIRST* iface
    356     break
    357     done
    358     else
    359     mysqldo "insert into cfg_network(
    360     hostname,
    361     serial,
    362     module,
    363     domain,
    364     networking
    365     )
    366     values(
    367     '${ALX_DEFAULT_HOSTNAME}',
    368     '${ALX_SERIAL}',
    369     '${NETCARD_DRIVER}',
    370     '${ALX_DEFAULT_DOMAIN}',
    371     'dhcp'
    372     );"
    373     fi
    374   evaluate_retval   evaluate_retval
    375    
    376   #xserver   # xserver
    377   echo -e "      Graphic settings ..."   rc_mecho "      Graphic settings ..."
    378   #xserver general   # xserver general
    379   ( mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \   ( mysqldo "insert into cfg_graphic(
      "insert into cfg_graphic(  
    380   serial,   serial,
    381   module,   module,
    382   resolution,   resolution,
    383   depth   depth,
    384     refresh_rate
    385   )   )
    386   values(   values(
    387   '${ALX_SERIAL}',   '${ALX_SERIAL}',
    388   '${XMODULE}',   '${XMODULE}',
    389   '1024x768',   '1024x768',
    390   '16'   '16',
    391   );";   '60'
    392   #xserver monitor   );"; )
    393    mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \   evaluate_retval
    394   "insert into cfg_monitor(  
    395     # input
    396     rc_mecho "      Input settings ..."
    397     mysqldo "insert into cfg_input(serial,mouse) values('${ALX_SERIAL}','${XMOUSETYPE}');"
    398     evaluate_retval
    399    
    400     # auth
    401     rc_mecho "      Authentification settings ..."
    402     mysqldo "insert into client_auth(
    403   serial,   serial,
    404   vendor,   username,
    405   model,   shell,
    406   hsync,   vnc,
    407   vrefresh   samba,
    408     station
    409   )   )
    410   values(   values(
    411   '${ALX_SERIAL}',   '${ALX_SERIAL}',
    412   'Aamazing',   '${ALX_UNPRIV_USER}',
    413   'CM-1528-FS',   '',
    414   '28-64',   '',
    415   '47-104'   '',
    416   );";   ''
    417     );"
    418     evaluate_retval
    419    
    420     # exchange ssh rsa keys - the first boot needs this !
    421     # or no reboot will work via the webadmin
    422     rc_mecho "      SSH authentification settings ..."
    423     HOME=/root config_ssh_auth
    424     evaluate_retval
    425    
    426     # autostart
    427     rc_mecho "      Autostart settings ..."
    428     mysqldo "insert into cfg_autostart(serial,session) values('${ALX_SERIAL}','');"
    429    
    430     # screensaver
    431     rc_mecho "      Screensaver settings ..."
    432     mysqldo "insert into cfg_screensaver(serial,screensaver) values('${ALX_SERIAL}','')"
    433    
    434     # version info
    435     rc_mecho "      OS version info ..."
    436     local alx_os
    437     local alx_utils
    438     alx_os="$(< /etc/mageversion)"
    439     alx_utils="$(magequery -n alxconfig-ng | sed 's:.*\[\ \(.*\)\ \].*:\1:')"
    440     alx_utils="${alx_utils/alxconfig-ng-}"
    441     mysqldo "insert into client_version(serial,os,utils) values('${ALX_SERIAL}','${alx_os}','${alx_utils}')"
    442    
    443     evaluate_retval
    444    }
    445    
    446    # imports current settings to the database resolved by the hardware detection
    447    update_settings_in_db()
    448    {
    449     # note: networking is always 'dhcp' if hw was autodetected
    450     # note: default_domain/hostname is set in config.rc or exported
    451     # note: we updating only hardware settings here !
    452    
    453     # to be safe, we do some sanity checks
    454     [ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain
    455     [ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx
    456    
    457     # vars used by hwsetup
    458     local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
    459     local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
    460     local MOUSETYPE XMOUSETYPE FULLNAME DEVICE
    461    
    462     # get setting from hwsetup
    463     source /etc/conf.d/hwsetup/knoppix
    464     source /etc/conf.d/hwsetup/mouse
    465    
    466     rc_echo
    467     rc_mecho "Updating detected settings in database"
    468    
    469     # network
    470     rc_mecho "      Network settings ..."
    471     if [[ ${ALX_CONFD_NETWORKING} = true ]]
    472     then
    473     # get settings
    474     #source ${rc_base}/init.d/network &> /dev/null
    475     for iface in $(onboot_interface_list ${network_settings}/net.*)
    476     do
    477     [[ $(< ${SETTINGSPATH}/confd-networking) != ${iface} ]] && continue
    478     rc_echo "WARNING: only importing settings for interface [ ${iface} ] !"
    479     source ${network_settings}/net.${iface} || exit 1
    480     NETCARD_DRIVER="$(cat /etc/modprobe.d/net.${iface}.conf | cut -d' ' -f3)"
    481    
    482     mysqldo "update cfg_network set
    483     hostname='${ALX_DEFAULT_HOSTNAME}',
    484     module='${NETCARD_DRIVER}',
    485     domain='${ALX_DEFAULT_DOMAIN}',
    486     networking='${NETWORKING}',
    487     netmask='${NETMASK}',
    488     dns='${NAMESERVER}',
    489     gateway='${GATEWAY}',
    490     broadcast='${BROADCAST}',
    491     ip='${IP}',
    492     forcemacto='${FORCE_MAC_TO}',
    493     wireless_bitrate='${WIRELESS_BITRATE}',
    494     wireless_channel='${WIRELESS_CHANNEL}',
    495     wireless_essid='${WIRELESS_ESSID}',
    496     wireless_frequency='${WIRELESS_FREQUENCY}',
    497     wireless_mode='${WIRELESS_MODE}',
    498     wireless_nick='${WIRELESS_NICK}',
    499     wireless_auth_mode='${WIRELESS_AUTH_MODE}',
    500     wireless_key_length='${WIRELESS_KEY_LENGTH}',
    501     wireless_key='${WIRELESS_KEY}',
    502     wireless_key_ascii='${WIRELESS_KEY_ASCII}'
    503     where serial=${ALX_SERIAL};"
    504    
    505     # only insert the *FIRST* iface
    506     break
    507     done
    508     else
    509     mysqldo "update cfg_network set
    510     hostname='${ALX_DEFAULT_HOSTNAME}',
    511     module='${NETCARD_DRIVER}',
    512     domain='${ALX_DEFAULT_DOMAIN}',
    513     networking='dhcp'
    514     where serial=${ALX_SERIAL};"
    515     fi
    516     evaluate_retval
    517    
    518     # xserver
    519     rc_mecho "      Graphic settings ..."
    520     # xserver general
    521     mysqldo "update cfg_graphic set
    522     module='${XMODULE}',
    523     resolution='1024x768',
    524     depth='16',
    525     refresh_rate='60'
    526     where serial=${ALX_SERIAL};"
    527     evaluate_retval
    528    
    529   # input   # input
    530    mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \   rc_mecho "      Input settings ..."
    531   "insert into cfg_input(serial,mouse) values('${ALX_SERIAL}','${XMOUSETYPE}');";)   mysqldo "update cfg_input set mouse='${XMOUSETYPE}' where serial=${ALX_SERIAL};"
    532   evaluate_retval   evaluate_retval
    533    
    534     # version info
    535     rc_mecho "      OS version info ..."
    536     local alx_os
    537     local alx_utils
    538     alx_os="$(< /etc/mageversion)"
    539     alx_utils="$(magequery -n alxconfig-ng-alx | sed 's:.*\[\ \(.*\)\ \].*:\1:')"
    540     alx_utils="${alx_utils/alxconfig-ng-alx-}"
    541     mysqldo "update client_version set os='${alx_os}', utils='${alx_utils}' where serial=${ALX_SERIAL};"
    542  }  }
    543    
    544  # imports current settings to the local system resolved by the hardware detection  # imports current settings to the local system resolved by the hardware detection
    545  # we only need the network settings  # we only need the network settings
    546  import_settings_local(){  import_settings_local()
    547   #note: networking is always 'dhcp' if hw was autodetected  {
    548   #note: default_domain/hostname is set in config.rc   # note: networking is always 'dhcp' if hw was autodetected
    549     # note: default_domain/hostname is set in config.rc
    550    
    551   #to be safe, we do some sanity checks   # to be safe, we do some sanity checks
    552   [ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain   [ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain
    553   [ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx   [ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx
    554    
    555   #vars used by hwdetect   # vars used by hwsetup
    556   local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME   local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
    557   local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER   local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
    558   local MOUSETYPE XMOUSETYPE FULLNAME DEVICE   local MOUSETYPE XMOUSETYPE FULLNAME DEVICE
    559    
    560   #get setting from hwdetect   # get setting from hwsetup
    561   source /etc/sysconfig/hwsetup/knoppix   source /etc/conf.d/hwsetup/knoppix
    562    
    563   echo   rc_echo
    564   echo -e ${COLMAGENTA}"Importing detected settings to local system"${COLDEFAULT}   rc_mecho "Importing detected settings to local system"
    565    
    566   [ ! -d ${SETTINGSPATH} ] && install -d ${SETTINGSPATH}   if [[ ${ALX_CONFD_NETWORKING} = false ]]
    567   echo "${NETCARD_DRIVER}" > ${SETTINGSPATH}/modules   then
    568   evaluate_retval   # set an device alias for modprobe.conf
    569     [ ! -d /etc/modprobe.d ] && install -d /etc/modprobe.d
    570     # update only if not the same (to speed up bootprocess - no depmod)
    571     CONFIG="/etc/modprobe.d/net.${ALX_IFACE}.conf"
    572     clearconfig
    573     addconfig "alias ${ALX_IFACE} ${cfg_network_module}"
    574    
    575     # update confd-networking default iface
    576     [ ! -d ${SETTINGSPATH} ] && install -d ${SETTINGSPATH}
    577     CONFIG="${SETTINGSPATH}/confd-networking"
    578     clearconfig
    579     addconfig "${ALX_IFACE}"
    580    
    581     # regenerate modprobe.conf
    582     [ -x $(which modules-update) ] && modules-update || rc_echo "modules-update not found!"
    583     evaluate_retval
    584    
    585     # restore default networking if hardware-detection was called by administrator and iface config is empty
    586     if [[ ${ALX_FORCED_RECHECK} =  true ]] && [ ! -s /etc/conf.d/net.${ALX_IFACE} ] && [ -f ${SETTINGSPATH}/confd-networking ]
    587     then
    588     rc_echo "   Network config is empty, using default skeleton"
    589     cat ${ALX_SKELETONS}/net/net.eth0 > /etc/conf.d/net.${ALX_IFACE}
    590     fi
    591     fi
    592    
    593   #set system state to 'already configured'   # set system state to 'already configured'
    594   touch /etc/alxconfig-ng/state/configured   touch /etc/alxconfig-ng/state/configured
    595    
    596     # install slim desktopmanager configuration
    597     config_display_manager
    598    
    599     # if only an recheck was forced than abort now
    600     [[ ${ALX_FORCED_RECHECK} = true ]] && return 0
    601    
    602     # create a fresh fluxbox directory
    603     [ -d ${ALX_UNPRIV_HOME}/.fluxbox ] && rm -rf ${ALX_UNPRIV_HOME}/.fluxbox
    604     install -d ${ALX_UNPRIV_HOME}/.fluxbox
    605    
    606     # now generate fluxbox config files
    607    
    608     # fluxbox main config
    609     local fbinit
    610     if [ -f ${ALX_SKELETONS}/fluxbox/init ]
    611     then
    612     fbinit="${ALX_SKELETONS}/fluxbox/init"
    613     else
    614     fbinit="/usr/share/fluxbox/init"
    615     fi
    616     cat ${fbinit} > ${ALX_UNPRIV_HOME}/.fluxbox/init
    617    
    618     # fluxbox autostart
    619     CONFIG="${ALX_UNPRIV_HOME}/.fluxbox/apps"
    620     # do not show decorations on messages generated with xmessage
    621     if [ -x /usr/bin/xmessage ]
    622     then
    623     addconfig '[app] (xmessage)'
    624     addconfig ' [Deco] {NONE}'
    625     addconfig '[end]'
    626     fi
    627     # add icon utility
    628     [ -x /usr/bin/idesk ] && addconfig '[startup] {nohup idesk > /dev/null &}'
    629     # add numlock utility
    630     [ -x /usr/bin/numlockx ] && addconfig '[startup] {nohup numlockx on &}'
    631    
    632     # fluxbox hotkeys
    633     local fbkeys
    634     if [ -f ${ALX_SKELETONS}/fluxbox/keys ]
    635     then
    636     fbkeys="${ALX_SKELETONS}/fluxbox/keys"
    637     else
    638     fbkeys="/usr/share/fluxbox/keys"
    639     fi
    640     cat ${fbkeys} > ${ALX_UNPRIV_HOME}/.fluxbox/keys
    641    
    642     # fluxbox menu header
    643     cat ${ALX_SKELETONS}/fluxbox/menu.header > ${ALX_UNPRIV_HOME}/.fluxbox/menu
    644    
    645     # now fix it with proper messages :P
    646     local ver="$(< /etc/mageversion)"
    647     sed -i "s:@CHANGEME@:alx-${ver}  #${ALX_SERIAL}:g" ${ALX_UNPRIV_HOME}/.fluxbox/menu
    648    
    649     # add a newline (maybe there is no crlf in the header)
    650     echo >> ${ALX_UNPRIV_HOME}/.fluxbox/menu
    651    
    652     # fluxbox menu footer
    653     cat ${ALX_SKELETONS}/fluxbox/menu.footer >> ${ALX_UNPRIV_HOME}/.fluxbox/menu
    654    
    655     # add a newline (maybe there is no crlf in the footer)
    656     echo >> ${ALX_UNPRIV_HOME}/.fluxbox/menu
    657    
    658     # setup some standart icons (sysinfo.lnk)
    659     # clean desktop icon location
    660     [ -d ${ALX_UNPRIV_HOME}/.idesktop ] && rm -rf ${ALX_UNPRIV_HOME}/.idesktop
    661     install -d ${ALX_UNPRIV_HOME}/.idesktop
    662    
    663     # add shutdown, reboot icons
    664     local name
    665     # default settings
    666     declare -i x=30
    667     declare -i y=30
    668     for i in shutdown reboot
    669     do
    670     case ${i} in
    671     shutdown) name="Herunterfahren" ;;
    672     reboot) name="Neustarten" ;;
    673     esac
    674    
    675     generate_icon \
    676     --name "${name}" \
    677     --command "/usr/lib/alxconfig-ng/bin/user_${i}.sh" \
    678     --icon "${ALX_SESSIONS_ICONS}/${i}.png" \
    679     --dest "${dest}/${i}.lnk" \
    680     --xres "${x}" \
    681     --yres "${y}"
    682    
    683     y=$((${y} + 80))
    684     done
    685    
    686     # last but not least gen a icon with some sys informations
    687     local sysinfo
    688     local osversion
    689     local xres
    690     local yres
    691    
    692     osversion="$(< /etc/mageversion)"
    693     sysinfo="Hostname: ${ALX_DEFAULT_HOSTNAME} Serial: #${ALX_SERIAL} OS: alx-${osversion} Kernel: $(uname -r)"
    694    
    695     # at first boot we got always a resolution of 1024x768-16@60
    696     # middle of the screen
    697     # (no txt - length required, xtdesk manage that itself)
    698     xres="$((1024 / 2))"
    699     # default y pos (full yres -22 !)
    700     yres="$((768 - 22 ))"
    701    
    702     generate_icon \
    703     --name "${sysinfo}" \
    704     --command "exit 0" \
    705     --icon "${ALX_SESSIONS_ICONS}/sysinfo.png" \
    706     --dest "${ALX_UNPRIV_HOME}/.idesktop/sysinfo.lnk" \
    707     --xres "${xres}" \
    708     --yres "${yres}" \
    709     --icon-width "1" \
    710     --icon-height "1"
    711    
    712     # set correct permissions
    713     chown ${ALX_UNPRIV_USER}:${ALX_UNPRIV_GROUP} ${ALX_UNPRIV_HOME}
    714     chown ${ALX_UNPRIV_USER}:${ALX_UNPRIV_GROUP} ${ALX_UNPRIV_HOME}/.fluxbox
    715     chmod 0755 ${ALX_UNPRIV_HOME}/.fluxbox
    716     chmod 0755 ${ALX_UNPRIV_HOME}/.idesktop
    717     if [ -f ${ALX_UNPRIV_HOME}/.ideskrc ]
    718     then
    719     chmod 0644 ${ALX_UNPRIV_HOME}/.ideskrc
    720     fi
    721  }  }
    722    
    723  #start|stop  # start|stop
    724  preliminary_network(){  preliminary_network()
    725    {
    726   local module   local module
    727    
    728   if [ -f /etc/alxconfig-ng/state/configured ]   if [ -f /etc/alxconfig-ng/state/configured ]
    729   then   then
    730   #get module name   # compat for old clients
    731   module=$(cat ${SETTINGSPATH}/modules)   if [ -f ${SETTINGSPATH}/modules ]
    732   modprobe ${module}   then
    733     # get module name
    734     module=$(cat ${SETTINGSPATH}/modules)
    735     modprobe ${module}
    736     fi
    737    
    738   else   else
    739   #vars used by hwdetect   # vars used by hwsetup
    740   local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME   local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
    741   local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER   local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
    742    
    743   #get setting from hwdetect   # get setting from hwsetup
    744   source /etc/sysconfig/hwsetup/knoppix   source /etc/conf.d/hwsetup/knoppix
    745   modprobe ${NETCARD_DRIVER}   modprobe ${NETCARD_DRIVER}
    746   fi   fi
    747    
    # Line 385  preliminary_network(){ Line 750  preliminary_network(){
    750   # keeping like always safe:   # keeping like always safe:
    751   # no network should be startet here,   # no network should be startet here,
    752   # so we can delete all pid files if one exists   # so we can delete all pid files if one exists
    753   if ps -A|grep dhcpcd > /dev/null   if [[ ! -z $(pidof $(basename ${ALX_DHCP_PROG})) ]]
    754   then   then
    755   echo -e ${COLMAGENTA}"Forcing network down"${COLDEFAULT}   rc_mecho "Forcing network down"
    756   dhcpcd -k   killall $(basename ${ALX_DHCP_PROG}) &> /dev/null
    757   sleep 1   sleep 1
      else  
      rm -f /var/run/dhcpcd-eth?.pid  
    758   fi   fi
    759     [[ ${ALX_CONFD_NETWORKING} = true ]] && ${rc_base}/init.d/network stop
    760    
    761   echo -e ${COLMAGENTA}"Starting preliminary network ... "${COLDEFAULT}   rc_mecho "Starting preliminary networking ... "
      dhcpcd &> /dev/null  
    762    
    763   # aka_fix ########################################   # start network configured from /etc/conf.d
    764   #ifconfig eth0 128.20.222.222 netmask 255.255.0.0 up   if [[ ${ALX_CONFD_NETWORKING} = true ]]
    765   #route del default gw 128.20.50.13 &> /dev/null   then
    766   #route add default gw 128.20.50.21 &> /dev/null   ${rc_base}/init.d/network start
    767   #echo "nameserver 128.20.50.21" > /etc/resolv.conf   else
    768   ##################################################   rc_print "Starting default dhcp based networking ... "
    769     ${ALX_DHCP_PROG} ${ALX_DHCP_START} ${ALX_IFACE} &> /dev/null
    770   evaluate_retval   evaluate_retval
    771     fi
    772   ;;   ;;
    773    
    774   stop)   stop)
    775   echo -e ${COLMAGENTA}"Stopping preliminary network ... "${COLDEFAULT}   rc_mecho "Stopping preliminary networking ... "
    776   ifconfig eth0 down   if [[ ${ALX_CONFD_NETWORKING} = true ]]
    777   if ps -A|grep dhcpcd > /dev/null   then
    778     ${rc_base}/init.d/network stop
    779     else
    780     rc_print "Stopping default dhcp based networking ... "
    781     ifconfig ${ALX_IFACE} down
    782     fi
    783     if [[ ! -z $(pidof $(basename ${ALX_DHCP_PROG})) ]]
    784   then   then
    785   dhcpcd -z  &> /dev/null   killall $(basename ${ALX_DHCP_PROG}) &> /dev/null
    786     sleep 1
    787   fi   fi
    788   evaluate_retval   evaluate_retval
    789   ;;   ;;
    790    
    791   *)   *)
    792   echo "Usage: preliminary_network {start|stop}"   rc_echo "Usage: preliminary_network {start|stop}"
    793   ;;   ;;
    794   esac   esac
    795  }  }
    796    
    797    reset_system_settings()
    798    {
    799     # force load of de kbdkeys
    800     [ -x /usr/bin/loadkeys ] && loadkeys -q de
    801     [ -x /sbin/loadkmap ] && loadkmap < /usr/share/busybox/keymaps/de.kmap
    802     rc_echo
    803     rc_echo -en "${COLRED}"
    804     rc_echo -n '--- Warning: you are about to reset *all* local settings on this system!'
    805     rc_echo -e "${COLDEFAULT}"
    806     rc_echo '--- Do you really want to continue ?'
    807     rc_echo -n '--- Enter 'yes' to continue, anything else to abort: '
    808     read kbinsert
    809     if [[ ${kbinsert} = yes ]]
    810     then
    811     rc_echo -en "${COLRED}"
    812     rc_echo -n '--- OK, you really want it ... killing all settings: '
    813     for i in 3 2 1 now
    814     do
    815     rc_echo -n " ${i}"
    816     sleep 1
    817     done
    818     rc_echo -e "${COLDEFAULT}"
    819    
    820     ## reset all settings:
    821     rm -rf ${SETTINGSPATH}
    822     rm -f /etc/alxconfig-ng/serial
    823     rm -rf /etc/alxconfig-ng/state
    824     local i
    825     for i in xserver netcard knoppix mouse
    826     do
    827     [[ -f /etc/conf.d/hwsetup/${i} ]] && rm /etc/conf.d/hwsetup/${i}
    828     done
    829    
    830     # clear all printers & net-shares
    831     :> /etc/printcap
    832    
    833     # remove lprng
    834     rc-config del lprng &> /dev/null
    835     rc-config del nmbd &> /dev/null
    836    
    837     # remove all user settings
    838     [ -d ${ALX_UNPRIV_HOME} ] && rm -rf ${ALX_UNPRIV_HOME}
    839     install -o ${ALX_UNPRIV_USER} -g ${ALX_UNPRIV_GROUP} -d ${ALX_UNPRIV_HOME}
    840    
    841     # remove all ica-sessions
    842     find ${ALX_ICA_SESSIONS} -type f -name '*.ica' | xargs --no-run-if-empty rm
    843    
    844     # remove all old nics and modules configs
    845     find /etc/conf.d -type f -name 'net.*' | xargs --no-run-if-empty rm
    846     find /etc/modprobe.d -type f -name 'net.*' | xargs --no-run-if-empty rm
    847    
    848     # restore default networking
    849     cat ${ALX_SKELETONS}/net/net.eth0 > /etc/conf.d/net.eth0
    850     local CONFIG="/etc/hostname"
    851     clearconfig
    852     addconfig "${ALX_DEFAULT_HOSTNAME}"
    853    
    854     rc_echo -n "I am done now, press [Enter] to reboot system ..."
    855     else
    856     rc_echo -n "Aborted, press [Enter] to reboot system ..."
    857     fi
    858     read
    859     sync
    860     mount -oremount,ro /
    861     reboot -f
    862    }
    863    
    864    onboot_interface_list()
    865    {
    866     local file
    867     local devices
    868     local iface
    869    
    870     # get list of all devices
    871     for file in $@
    872     do
    873     if [[ $(read_value ONBOOT ${file}) = yes ]]
    874     then
    875     iface="$(basename ${file} | sed s/net.//)"
    876     # exclude backup files
    877     case "${iface}" in
    878     *~) ;;
    879     *) devices="${devices} $(basename ${file} | sed s/net.//)" ;;
    880     esac
    881     fi
    882     done
    883    
    884     echo "${devices}"
    885    }
    886    
    887    # read values from net.* files
    888    read_value()
    889    {
    890     local var="$1"
    891     local file="$2"
    892     local value
    893    
    894     # local all possible vars
    895     # global
    896     local ONBOOT
    897     local NETWORKING
    898    
    899     # static
    900     local IP
    901     local NETMASK
    902     local BROADCAST
    903     local NETWORKING
    904     local FORCE_MAC_TO
    905    
    906     # dhcp
    907     local DHCP_PROG
    908     local DHCP_START
    909     local DHCP_STOP
    910    
    911     # default gw
    912     local GATEWAY
    913     local GATEWAY_IF
    914    
    915     # wireless extensions
    916     local WIRELESS_AP
    917     local WIRELESS_AUTH_MODE
    918     local WIRELESS_BITRATE
    919     local WIRELESS_CHANNEL
    920     local WIRELESS_DEFAULT_KEY
    921     local WIRELESS_ESSID
    922     local WIRELESS_FREQUENCY
    923     local WIRELESS_KEY
    924     local WIRELESS_KEY_ASCII
    925     local WIRELESS_KEY_0
    926     local WIRELESS_KEY_1
    927     local WIRELESS_KEY_2
    928     local WIRELESS_KEY_3
    929     local WIRELESS_KEY_LENGTH
    930     local WIRELESS_MODE
    931     local WIRELESS_NICK
    932     local WIRELESS_NWID
    933     local WIRELESS_POWER
    934    
    935     source ${file}
    936     eval value=\$$(echo ${var})
    937     echo "${value}"
    938    }
    939    
    940  case $1 in  case $1 in
    941   start)   start)
    942   #retrieve or validate current serial   # check for global overrides
    943     [ -f ${SETTINGSPATH}/confd-networking ] && ALX_CONFD_NETWORKING=true
    944     [ -f /hardware-auto-detection ] && ALX_FORCED_RECHECK=true
    945     read_cmdline hardware-auto-detection && ALX_FORCED_RECHECK=true
    946     read_cmdline alx-reset-settings && ALX_RESET_SETTINGS=true
    947    
    948     # kill all settings if requested
    949     if [[ ${ALX_RESET_SETTINGS} = true ]]
    950     then
    951     reset_system_settings
    952     fi
    953    
    954     # retrieve or validate current serial
    955   get_system_serial   get_system_serial
    956   if [ "${ALX_HW_DETECT}" == "true" ]   if [[ ${ALX_HW_DETECT} = true ]]
    957   then   then
    958   import_settings_to_db   if [[ ${ALX_FORCED_RECHECK} = true ]]
    959     then
    960     update_settings_in_db
    961     else
    962     import_settings_to_db
    963     fi
    964   import_settings_local   import_settings_local
    965    
    966     # here we should also exchange the ssh keys
    967     # or the system cannot be rebooted after
    968     # the first start via the alx-webadmin
    969     config_ssh_auth
    970   fi   fi
       
      #now setup system configuration  
      #alx_setup_or_whatever_it_will_be_called()  
      [ "${ALX_HW_DETECT}" == "false" ] && update_system_settings  
    971    
    972   #stop at last the preliminary networking (dhcp)   # now setup system configuration
    973     # alx_setup_or_whatever_it_will_be_called()
    974     [[ ${ALX_HW_DETECT} = false ]] && update_system_settings
    975    
    976     # stop at last the preliminary networking (dhcp)
    977   preliminary_network stop   preliminary_network stop
    978   ;;   ;;
    979    
    980   stop)   stop)
    981   #unset_alx_connected #--> now in alxsetstate-rc6   # unset_alx_connected #--> now in alxsetstate-rc6
    982   # ! important !: del systemstate   # ! important !: del systemstate
    983   [ -f /etc/alxconfig-ng/state/state ] && rm /etc/alxconfig-ng/state/state   [ -f /etc/alxconfig-ng/state/state ] && rm /etc/alxconfig-ng/state/state
    984   sleep 0.1   sleep 0.1
    985   ;;   ;;
    986    
    987   *)   *)
    988   echo "Usage: $0 {start|stop} ..."   rc_echo "Usage: $0 {start|stop} ..."
    989   ;;   ;;
    990  esac  esac
    Legend:
    Removed from v.227  
    changed lines
      Added in v.4834