Diff of /alx-src/branches/alxconf-060/init.d/alxsettings

Parent Directory | Revision Log | Patch

	alx-src/trunk/alxconfig-ng/init.d/alxsettings revision 221 by niro, Tue Mar 8 20:49:14 2005 UTC	alx-src/branches/alxconf-060/init.d/alxsettings revision 2156 by niro, Tue May 17 21:41:48 2011 UTC
#	Line 1	Line 1
1	#!/bin/bash	#!/bin/bash
2		# $Id$
3	# <niro@magellan-linux.de>	# <niro@magellan-linux.de>
4
5	#%rlevels: 7:s 0:k 6:k	#%rlevels: 7:s 0:k
6	#%start: 41	#%start: 41
7	#%stop: 01	#%stop: 01
8
#	Line 19	Line 19
19	# if no changes are at server side they will be kept, if yes the get updated.	# if no changes are at server side they will be kept, if yes the get updated.
20	# the server settings has higher priority.	# the server settings has higher priority.
21
22	#                       +-----+	source /etc/conf.d/rc
	#                       |start|
	#                       +-----+
	#                          |
	#                          |
	#              start_preliminary_network
	#                          |
	#                          |       n
	#                  serial_check ------->  get_new_serial
	#                          |                      |
	#                         y|                      |
	#                          |           n          |
	#                check_is_configured ---->  run_hw_detection
	#                          |                      |
	#                         y|                      |
	#            n             |                      |
	#        +--------cfg_equal_to_db          import_settings_to_db
	#        |                 |                      |
	#   update_from_db        y|                      |
	#        |                 |                      |
	#   set_is_configured      |                  set_is_configured
	#        +-----------------|                      |
	#                          +----------------------+
	#                          |
	#                          |
	#               stop_preliminary_network
	#                          |
	#                          |
	#                       +----+
	#                       |done|
	#                       +----+
	#                          |
	#                          |
	#                 normal_system_bootup
	#                          |
	#                          .
	#                          .
	#                          .
	#
	#
	#
	source /etc/sysconfig/rc
23	source $rc_functions	source $rc_functions
24
25	#mysql settings	# mysql settings
26	source /etc/alx-config/config.rc	source /etc/alxconfig-ng/config.rc
	source /opt/alx-config/functions/mysqlfunctions
	source /opt/alx-config/functions/alx-mysql-functions
27
28	#check if mysql is available	# helper functions
29	[ -x /usr/bin/mysql ] && MYSQL_ALX=true	source /usr/lib/alxconfig-ng/functions/common
30		source /usr/lib/alxconfig-ng/functions/mysqlfunctions
31		source /usr/lib/alxconfig-ng/functions/serial_functions
32		source /usr/lib/alxconfig-ng/functions/config_modules
33		source /usr/lib/alxconfig-ng/functions/config_network
34		source /usr/lib/alxconfig-ng/functions/config_printers
35		source /usr/lib/alxconfig-ng/functions/config_sessions
36		source /usr/lib/alxconfig-ng/functions/config_x11
37		source /usr/lib/alxconfig-ng/functions/config_auth
38		source /usr/lib/alxconfig-ng/functions/config_ssh_auth
39		source /usr/lib/alxconfig-ng/functions/config_versions
40
41	#other needed vars	# other needed vars
42	ALX_HW_DETECT=false	ALX_HW_DETECT=false
43	ALX_NETWORK_SETUP=false	ALX_FORCED_RECHECK=false
44	ALX_XSERVER_SETUP=false	ALX_RESET_SETTINGS=false
45	ALX_SESSION_SETUP=false	ALX_CONFD_NETWORKING=false
	ALX_PRINTER_SETUP=false
46
47	#unset vars which may kill us	# unset vars which may kill us
48	unset ALX_SERIAL ALX_STATE	unset ALX_SERIAL ALX_STATE
49
50
51	#setup needed directories	# setup needed directories
52	[ ! -d /etc/alx-config/state ] && install -d /etc/alx-config/state	[ ! -d /etc/alxconfig-ng/state ] && install -d /etc/alxconfig-ng/state
	# still a need to implement this ?
	# #needed to detect usb/livecd boot
	# if [ -e /.bootdev ]
	# then
	# source /.bootdev
	# else
	# echo "Couldn't find /.bootdev. Aborting."
	# exit 1
	# fi
	# still a need to implement this ? --> media-check ?
	settings_import() {
	if [ "${FSTYPE}" == "vfat" ]
	then
	if [ -e /mnt/cdrom/settings/system ]
	then
	echo -e ${COLOREDSTAR}"Importing old alx-settings ..."
	( cp -R /mnt/cdrom/settings/system/* /etc/alx-config/settings/menu &&
	source /etc/alx-config/config.rc &&
	source /opt/alx-config/Configurator/config_functions.sh &&
	setup_xfree > /dev/null 2>&1 &&
	setup_modules > /dev/null 2>&1 &&
	setup_network > /dev/null 2>&1 &&
	#setup_printers > /dev/null 2>&1 &&
	setup_sessions > /dev/null 2>&1 &&
	touch /etc/alx-config/imported )
	evaluate_retval
	fi
	fi
	}
	# this thingy needs an complete rewrite.
	# first get all settings from db server,
	# than check against local system settings,
	# if there are any differences, update the local settings,
	# as the server has a higher priority.
	# Important: write local settings only if they make sense,
	#            to have a fallback in case the server is down!
	#get_settings_from_server(){
	# #some needed arrays
	# #ARRAY_NETWORK #module domain networking netmask dns gateway
	# #SESSION #
	# #GRAFIK  #
	#
	# echo "Importing now old Settings ..."
	#
	# local serial module domain networking netmask dns gateway i x all
	#
	# declare -i i=0
	#
	# #get hostname from database
	# MY_HOSTNAME=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select hostname from cfg_serial where id='${ALX_SERIAL}'")
	#
	# #get network settings from database
	# all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select module,
	# domain,
	# networking,
	# netmask,
	# dns,
	# gateway,
	# broadcast,
	# ip
	# from cfg_network where serial='${ALX_SERIAL}'")
	# #split'em up and put in array
	# for x in ${all}
	# do
	# ARRAY_NETWORK[${i}]=${x}
	# ((i++))
	# done
	# echo " Network:"
	# echo "   MODULE:     ${ARRAY_NETWORK[0]}"
	# echo "   IP:         ${ARRAY_NETWORK[7]}"
	# echo "   HOSTNAME:   ${MY_HOSTNAME}"
	# echo "   DOMAIN:     ${ARRAY_NETWORK[1]}"
	# echo "   NETWORKING: ${ARRAY_NETWORK[2]}"
	# echo "   NETMASK:    ${ARRAY_NETWORK[3]}"
	# echo "   DNS:        ${ARRAY_NETWORK[4]}"
	# echo "   GATEWAY:    ${ARRAY_NETWORK[5]}"
	# echo "   BROADCAST:  ${ARRAY_NETWORK[6]}"
	# echo
	#
	# #get x settings from database
	# local module resolution
	#
	# #reset i
	# declare -i i=0
	# all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select module,
	# resolution
	# from cfg_grafik where serial='${ALX_SERIAL}'")
	# #split'em up and put in array
	# for x in ${all}
	# do
	# ARRAY_GRAFIK[${i}]=${x}
	# ((i++))
	# done
	#
	# echo " VGA:"
	# echo "   MODULE:     ${ARRAY_GRAFIK[0]}"
	# echo "   RESOLUTION: ${ARRAY_GRAFIK[1]}"
	# echo
	#
	# #get ica-sessions from database
	# ARRAY_SESSIONS=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select session from cfg_session where serial='${ALX_SERIAL}'")
	#
	# echo " SESSIONS:"
	# declare -i i=0
	# for x in ${ARRAY_SESSIONS}
	# do
	# ((i++))
	# echo "   SESSION${i}:   ${x}"
	# done
	# echo
	#
	# #now write these settings
	# local SETTINGSPATH
	#
	# #network
	#
	# #settings must be also set on system, so we put this to menu
	# SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	#
	# [ ! -d ${SETTINGSPATH}/modules ] && install -d ${SETTINGSPATH}/modules
	# echo "${ARRAY_NETWORK[0]}" > ${SETTINGSPATH}/modules/modules
	#
	# [ ! -d ${SETTINGSPATH}/network ] && install -d ${SETTINGSPATH}/network
	# echo "${MY_HOSTNAME}" > ${SETTINGSPATH}/network/hostname
	# echo "${ARRAY_NETWORK[1]}" > ${SETTINGSPATH}/network/domain
	# echo "${ARRAY_NETWORK[2]}" > ${SETTINGSPATH}/network/networking
	# [ -n "${ARRAY_NETWORK[3]}" ] && echo "${ARRAY_NETWORK[3]}" > ${SETTINGSPATH}/network/netmask
	# [ -n "${ARRAY_NETWORK[4]}" ] && echo "${ARRAY_NETWORK[4]}" > ${SETTINGSPATH}/network/dns
	# [ -n "${ARRAY_NETWORK[5]}" ] && echo "${ARRAY_NETWORK[5]}" > ${SETTINGSPATH}/network/gateway
	# [ -n "${ARRAY_NETWORK[6]}" ] && echo "${ARRAY_NETWORK[6]}" > ${SETTINGSPATH}/network/broadcast
	# [ -n "${ARRAY_NETWORK[7]}" ] && echo "${ARRAY_NETWORK[7]}" > ${SETTINGSPATH}/network/ip
53
54
55	validate_networking(){	# read_cmdline ${item}
56	#source /opt/alx-config/Configurator/config_functions.sh	read_cmdline()
57		{
58		local i
59
60	local x i all LOCAL_NETWORK DB_NETWORK SETTINGSPATH	for i in $(< /proc/cmdline)
	#all arrays:
	# ->  hostname modules domain networking ip netmask dns gateway broadcast
	#networking
	#get settings from local system
	SETTINGSPATH=${SETTINGS_TEMPLATE}/system
	declare -i i=0
	for x in network/hostname \
	modules/modules \
	network/domain \
	network/networking \
	network/ip \
	network/netmask \
	network/dns \
	network/gateway \
	network/broadcast
	do
	if [ -f ${SETTINGSPATH}/${x} ]
	then
	#file exist, then use content
	LOCAL_NETWORK[${i}]="$(< ${SETTINGSPATH}/${x})"
	else
	LOCAL_NETWORK[${i}]=""
	fi
	((i++))
	done
	#get settings from database
	# DB_NETWORK[0]=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select hostname from cfg_network where serial='${ALX_SERIAL}'")
	all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select hostname,
	module,
	domain,
	networking,
	ip,
	netmask,
	dns,
	gateway,
	broadcast
	from cfg_network where serial='${ALX_SERIAL}'")
	#split'em up and put in an array
	declare -i i=0
	for x in ${all}
61	do	do
62	DB_NETWORK[${i}]=${x}	[[ ${i} = $1 ]] && return 0
	((i++))
63	done	done
	#needed by the small hotfix
	local FIX_ME
	FIX_ME="${DB_NETWORK[2]}"
	#now compare this stuff if they are equal
	for ((i=0; i < 9; i++))
	do
	if [ "${DB_NETWORK[${i}]}" = "${LOCAL_NETWORK[${i}]}" ]
	then
	echo "${i}: ${DB_NETWORK[${i}]} == ${LOCAL_NETWORK[${i}]}"
	#delete equal stuff from DB_NETWORK
	DB_NETWORK[${i}]="*NULL*"
	else
	echo "${i}: ${DB_NETWORK[${i}]} != ${LOCAL_NETWORK[${i}]}"
	fi
	done
	#update configs
	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	declare -i i=0
	for x in network/hostname \
	modules/modules \
	network/domain \
	network/networking \
	network/ip \
	network/netmask \
	network/dns \
	network/gateway \
	network/broadcast
	do
	#update only staff wich wasn't overwritten
	if [ "${DB_NETWORK[${i}]}" != "*NULL*" ]
	then
	#create directory if not exist
	if [ ! -d $(dirname ${SETTINGSPATH}/${x}) ]
	then
	install -d $(dirname ${SETTINGSPATH}/${x})
	fi
	echo "${DB_NETWORK[${i}]}" > ${SETTINGSPATH}/${x}
	# theses fucking config functions:
	# network gets only updated,
	# if ${SETTINGS_TEMPLATE}/menu/network/networking exist
	# so we force an update here
	if [ ! -f ${SETTINGSPATH}/network/networking ]
	then
	[ ! -d ${SETTINGSPATH}/network ] && install -d ${SETTINGSPATH}/network
	echo "${FIX_ME}" > ${SETTINGSPATH}/network/networking
	fi
64
65	#set update flag	return 1
	ALX_NETWORK_SETUP=true
	fi
	((i++))
	done
66	}	}
67
68		update_system_settings()
69		{
70		rc_mecho Checking system setup ...
71
72		# get the modules settings
73		# ! is the first thing that must be configured !
74		config_modules
75
76	validate_xserver(){	# imports network settings from db
77	#source /opt/alx-config/Configurator/config_functions.sh	config_networking
	local x i all LOCAL_XSERVER DB_XSERVER SETTINGSPATH
78
79	#all arrays:	# imports x11 settings from db
80	# ->  xmodule resolution depth mouse monvendor monmodel hsync vref	config_x11
81
82	#xserver	# imports session settings from db
83	#get settings from local system	config_sessions
	#vga
	SETTINGSPATH=${SETTINGS_TEMPLATE}/system
	declare -i i=0
	for x in vga/vga \
	vga/vgares \
	vga/vgadepth
	do
	if [ -f ${SETTINGSPATH}/${x} ]
	then
	#file exist, then use content
	LOCAL_XSERVER[${i}]="$(< ${SETTINGSPATH}/${x})"
	else
	LOCAL_XSERVER[${i}]=""
	fi
	((i++))
	done
	#mouse
	if [ -f ${SETTINGSPATH}/mouse/mouse ]
	then
	#file exist, then use content
	LOCAL_XSERVER[3]="$(< ${SETTINGSPATH}/mouse/mouse)"
	else
	LOCAL_XSERVER[3]=""
	fi
	#monitor
	local myvendor mymodel hsync vref
	if [ -f ${SETTINGSPATH}/monitor/monitor ]
	then
	source ${SETTINGSPATH}/monitor/monitor
	declare -i i=4
	for x in "${myvendor}" \
	"${mymodel}" \
	"${hsync}" \
	"${vref}"
	do
	LOCAL_XSERVER[${i}]="${x}"
	((i++))
	done
	else
	LOCAL_XSERVER[4]=""
	LOCAL_XSERVER[5]=""
	LOCAL_XSERVER[6]=""
	LOCAL_XSERVER[7]=""
	fi
	#get settings from database
	all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select module,
	resolution,
	depth
	from cfg_graphic where serial='${ALX_SERIAL}'")
	#split'em up and put in an array
	declare -i i=0
	for x in ${all}
	do
	DB_XSERVER[${i}]=${x}
	((i++))
	done
	# read mouse
	DB_XSERVER[3]=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select mouse from cfg_input where serial='${ALX_SERIAL}'")
	#monitors
	# all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select vendor,
	# model,
	# hsync,
	# vrefresh
	# from cfg_monitor where serial='${ALX_SERIAL}'")
	all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select vendor,
	model,
	hsync,
	vrefresh
	from list_monitors
	inner join cfg_graphic
	on cfg_graphic.monitorid=list_monitors.id;")
	#split'em up and put in an array
	declare -i i=4
	for x in ${all}
	do
	DB_XSERVER[${i}]=${x}
	((i++))
	done
	# #now compare this stuff if they are equal
	# for ((i=0; i < 8; i++))
	# do
	# if [ "${DB_XSERVER[${i}]}" = "${LOCAL_XSERVER[${i}]}" ]
	# then
	# echo "${i}: ${DB_XSERVER[${i}]} == ${LOCAL_XSERVER[${i}]}"
	#
	# #delete equal stuff from DB_NETWORK
	# DB_XSERVER[${i}]="*NULL*"
	#
	# else
	# echo "${i}: ${DB_XSERVER[${i}]} != ${LOCAL_XSERVER[${i}]}"
	# fi
	# done
	#
	#
	# #update configs
	# SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	# #xserver general
	# declare -i i=0
	# for x in vga/vga \
	# vga/vgares \
	# vga/vgadepth \
	# mouse/mouse
	# do
	# #update only staff wich wasn't overwritten
	# if [ "${DB_XSERVER[${i}]}" != "*NULL*" ]
	# then
	# #create directory if not exist
	# if [ ! -d $(dirname ${SETTINGSPATH}/${x}) ]
	# then
	# install -d $(dirname ${SETTINGSPATH}/${x})
	# fi
	# echo "${DB_XSERVER[${i}]}" > ${SETTINGSPATH}/${x}
	# #set update flag
	# ALX_XSERVER_SETUP=true
	# fi
	# ((i++))
	# done
	#
	# #xserver monitors
	# if [ "${DB_XSERVER[4]}" != "*NULL*" \
	# -o "${DB_XSERVER[5]}" != "*NULL*" \
	# -o "${DB_XSERVER[6]}" != "*NULL*" \
	# -o "${DB_XSERVER[7]}" != "*NULL*" ]
	# then
	# if [ ! -d ${SETTINGSPATH}/monitor ]
	# then
	# install -d ${SETTINGSPATH}/monitor
	# fi
	# echo "myvendor=\"${DB_XSERVER[4]}\"" > ${SETTINGSPATH}/monitor/monitor
	# echo "mymodel=\"${DB_XSERVER[5]}\"" >> ${SETTINGSPATH}/monitor/monitor
	# echo "hsync=\"${DB_XSERVER[6]}\"" >> ${SETTINGSPATH}/monitor/monitor
	# echo "vref=\"${DB_XSERVER[7]}\"" >> ${SETTINGSPATH}/monitor/monitor
	#
	# #set update flag
	# ALX_XSERVER_SETUP=true
	# fi
	# - damn fucking setup_xfree routine need to rewrite this fucking stuff -
	# setup_xfree will only run
	# if ${SETTINGS_TEMPLATE}/menu/vga/vga exist
	# so we must *always* update *all* settings if something has changed
84
85	#now compare this stuff if they are equal	# imports printer settings from db
86	for ((i=0; i < 8; i++))	config_printing
	do
	if [ "${DB_XSERVER[${i}]}" = "${LOCAL_XSERVER[${i}]}" ]
	then
	echo "${i}: ${DB_XSERVER[${i}]} == ${LOCAL_XSERVER[${i}]}"
	#delete equal stuff from DB_NETWORK
	#DB_XSERVER[${i}]="*NULL*"
	else
	echo "${i}: ${DB_XSERVER[${i}]} != ${LOCAL_XSERVER[${i}]}"
	fi
	done
	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	if [ "${DB_XSERVER[0]}" != "*NULL*" \
	-o "${DB_XSERVER[1]}" != "*NULL*" \
	-o "${DB_XSERVER[2]}" != "*NULL*" \
	-o "${DB_XSERVER[3]}" != "*NULL*" \
	-o "${DB_XSERVER[4]}" != "*NULL*" \
	-o "${DB_XSERVER[5]}" != "*NULL*" \
	-o "${DB_XSERVER[6]}" != "*NULL*" \
	-o "${DB_XSERVER[7]}" != "*NULL*" ]
	then
	[ ! -d ${SETTINGSPATH}/vga ] && install -d ${SETTINGSPATH}/vga
	[ ! -d ${SETTINGSPATH}/mouse ] && install -d ${SETTINGSPATH}/mouse
	[ ! -d ${SETTINGSPATH}/monitor ] && install -d ${SETTINGSPATH}/monitor
	echo "${DB_XSERVER[0]}" > ${SETTINGSPATH}/vga/vga
	echo "${DB_XSERVER[1]}" > ${SETTINGSPATH}/vga/vgares
	echo "${DB_XSERVER[2]}" > ${SETTINGSPATH}/vga/vgadepth
	echo "${DB_XSERVER[3]}" > ${SETTINGSPATH}/mouse/mouse
	echo "myvendor=\"${DB_XSERVER[4]}\"" > ${SETTINGSPATH}/monitor/monitor
	echo "mymodel=\"${DB_XSERVER[5]}\"" >> ${SETTINGSPATH}/monitor/monitor
	echo "hsync=\"${DB_XSERVER[6]}\"" >> ${SETTINGSPATH}/monitor/monitor
	echo "vref=\"${DB_XSERVER[7]}\"" >> ${SETTINGSPATH}/monitor/monitor
	#set update flag
	ALX_XSERVER_SETUP=true
	fi
	}
87
88		# imports auth settings from db
89		config_auth
90
91	validate_sessions(){	# exchange ssh rsa keys
92	#source /opt/alx-config/Configurator/config_functions.sh	HOME=/root config_ssh_auth
93
94	local x i all LOCAL_SESSIONS DB_SESSIONS SETTINGSPATH count	# import version info
95		config_version
	#all arrays:
	# ->  session1 session2 ... sessionN
	#no LOCAL_SESSIONS here, needs bubblesort
	#get settings from database
	all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select session from cfg_sessions where serial='${ALX_SERIAL}'")
	#split'em up and put in an array (only if $all not zero)
	declare -i i=0
	if [ -n "${all}" ]
	then
	for x in ${all}
	do
	DB_SESSIONS[${i}]=${x}
	((i++))
	done
	count=${i}
	else
	count=0
	fi
	## no compare here, can only done with bubblesort or s.th like that
	# shows only the new sessions
	declare -i i=0
	#count=${#DB_SESSIONS[*]} #---> not working gets always 1, why ?
	echo "Number of new sessions: ${count}"
	for ((i=0; i < count; i++))
	do
	echo "${i} - ${DB_SESSIONS[${i}]}"
	done
	#update local configs
	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	declare -i i=0
	#count=${#DB_SESSIONS[*]}
	if [ ${count} -gt 0 ]
	then
	#create directory if not exist
	[ ! -d ${SETTINGSPATH}/sessions ] && install -d ${SETTINGSPATH}/sessions
	#delete old sessions
	echo -n > ${SETTINGSPATH}/sessions/sessions
	for ((i=0; i < count; i++))
	do
	echo "${DB_SESSIONS[${i}]}" >> ${SETTINGSPATH}/sessions/sessions
	done
	#set update flag
	ALX_SESSION_SETUP=true
	fi
96	}	}
97
98		get_system_serial()
99		{
100		local CUR_IP CUR_MAC CUR_MTIME ALX_IFACE
101
102	validate_printing(){	if [[ ${ALX_CONFD_NETWORKING} = true ]]
	#source /opt/alx-config/Configurator/config_functions.sh
	local x i k all LOCAL_PRINTER DB_PRINTER SETTINGSPATH count
	#all arrays: [2 dimensions !]
	# ->  name1 name2 ... nameN
	# ->  name1 printingport ip share
	#later on, for now -> name1 port1 ip1 share1 name2 ....
	# seperator is 4
	#local PRINTERNAME PRINTING IP SHARE
	# update *always* printers from database;
	# compare with local settings cannot be done yet
	#get settings from database
	all=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select printer_name,
	port,
	ip,
	share
	from cfg_printers where serial='${ALX_SERIAL}'")
	#split'em up and put in an array
	declare -i i=0
	declare -i k=0
	if [ -n "${all}" ]
103	then	then
104	for x in ${all}	ALX_IFACE="$(< ${SETTINGSPATH}/confd-networking)"
	do
	((k++))
	DB_PRINTER[${i}]="${DB_PRINTER[${i}]} ${x}"
	if [ ${k} -eq 4 ]
	then
	((i++))
	#reset $k
	declare -i k=0
	fi
	done
	count=${i}
105	else	else
106	count=0	ALX_IFACE="eth0"
	fi
	#echo settings
	echo "Number of new printers: ${count}"
	for ((i=0; i < count; i++))
	do
	echo "${i} printer:"
	for x in ${DB_PRINTER[${i}]}
	do
	echo "    ${x}"
	done
	done
	#import settings (only if counter > 0)
	local prnset
	#delete all printers (*always*)
	if [ -d ${SETTINGS_TEMPLATE}/system/printing ]
	then
	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	[ -d ${SETTINGSPATH}/delete ] && rm -rf ${SETTINGSPATH}/delete
	install -d ${SETTINGSPATH}/delete
	mv -f ${SETTINGS_TEMPLATE}/system/printing/* ${SETTINGSPATH}/delete
	rm -rf ${SETTINGS_TEMPLATE}/system/printing
	#set update flag (*always*)
	ALX_PRINTER_SETUP=true
107	fi	fi
	if [ ${count} -gt 0 ]
	then
	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	[ ! -d ${SETTINGSPATH}/printing ] && install -d ${SETTINGSPATH}/printing
	for ((i=0; i < count; i++))
	do
	declare -i k=0
	for x in ${DB_PRINTER[${i}]}
	do
	prnset[${k}]=${x}
	((k++))
	done
	echo "PRINTERNAME=${prnset[0]}" >  ${SETTINGSPATH}/printing/${prnset[0]}
	echo "PRINTING=${prnset[1]}" >> ${SETTINGSPATH}/printing/${prnset[0]}
	echo "IP=${prnset[2]}" >> ${SETTINGSPATH}/printing/${prnset[0]}
	echo "SHARE=${prnset[3]}" >> ${SETTINGSPATH}/printing/${prnset[0]}
	done
	#set update flag (*always*)
	ALX_PRINTER_SETUP=true
	fi
	}
	update_system_settings(){
	source /opt/alx-config/Configurator/config_functions.sh
108
109	echo -e ${COLMAGENTA}"Checking system setup ..."${COLDEFAULT}	# check if serial file exists
110		if [ -f /etc/alxconfig-ng/serial ] && [[ ${ALX_FORCED_RECHECK} = false ]]
	echo
	echo "network"
	validate_networking
	echo
	echo "xserver"
	validate_xserver
	echo
	echo "sessions"
	validate_sessions
	echo
	#echo "printers"
	#validate_printing
	#echo
	if [ "${ALX_NETWORK_SETUP}" == "true" ]
	then
	echo -e ${COLMAGENTA}"Updating network settings"${COLDEFAULT}
	setup_modules
	setup_network
	fi
	if [ "${ALX_XSERVER_SETUP}" == "true" ]
111	then	then
112	echo -e ${COLMAGENTA}"Updating xserver settings"${COLDEFAULT}	source /etc/alxconfig-ng/serial
	setup_xfree
	fi
	if [ "${ALX_SESSION_SETUP}" == "true" ]
	then
	echo -e ${COLMAGENTA}"Updating session settings"${COLDEFAULT}
	setup_sessions
	fi
	#if [ "${ALX_PRINTER_SETUP}" == "true" ]
	#then
	# echo -e ${COLMAGENTA}"Updating printer settings"${COLDEFAULT}
	# setup_printers
	#fi
	#clean up temp files
	local SETTINGSPATH
	SETTINGSPATH=${SETTINGS_TEMPLATE}/menu
	#[ -d ${SETTINGSPATH} ] && rm -rf ${SETTINGSPATH}
	}
113
114	get_system_serial(){	# start preliminary networking (dhcp)
115		preliminary_network start
116
117	local CUR_IP CUR_MAC CUR_MTIME	# check if mysql server is reachable
118		# if not abort this script
119		if ! reach_mysql_server
120		then
121		preliminary_network stop
122		exit 1
123		fi
124
125	#check if serial file exists	CUR_IP=$(ifconfig ${ALX_IFACE} | sed -n '/addr:/s/ [^r]*..//gp')
126	if [ -f /etc/alx-config/serial ]	CUR_MAC=$(ifconfig ${ALX_IFACE} | grep HWaddr | cut -d ' ' -f11)
	then
	source /etc/alx-config/serial
	# if system is already configured, it *has* a hostname.
	# so we take the hostname of this system here
	source /etc/hostname
	#start preliminary networking (dhcp)
	preliminary_network start
	CUR_IP=$(/sbin/ifconfig eth0 | sed -n '/addr:/s/ [^r]*..//gp')
	CUR_MAC=$(/sbin/ifconfig eth0 | grep HWaddr | cut -d ' ' -f11)
127	CUR_MTIME=$(date +%s)	CUR_MTIME=$(date +%s)
128
129	echo -e ${COLOREDSTAR} "Trying to validate my serial ..."	rc_print "Trying to validate my serial ..."
130
131	#nice serial output	# nice serial output
132	$CURS_UP	$CURS_UP
133	$SET_WCOL	$SET_WCOL
134	echo "[ SN: ${ALX_SERIAL} ]"	echo "[ SN: ${ALX_SERIAL} ]"
	# #is this system outdated ?
	# #MY_HOSTNAME=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# # "select hostname from cfg_serial where id='${ALX_SERIAL}'")
	#
	# #we do this now with the date instead of the hostname
	# local MY_ALX_REG_DATE
	# MY_ALX_REG_DATE=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select mtime from client_serial where serial='${ALX_SERIAL}'")
	#
	# #if [ "${MY_HOSTNAME}" == "${HOSTNAME}" ]
	# if [ "${MY_ALX_REG_DATE}" == "${ALX_REG_DATE}" ]
	# then
	# #set ALX_STATE to ok so everybody that everything was ok
	# ALX_STATE=ok
	#
	# evaluate_retval
	# else
	# #print false (works only if this is the first statement here)
	# evaluate_retval
	#
	# #set ALX_STATE to error so everybody sees there was an error
	# ALX_STATE=error
	# fi
135
136	if validate_serial "${ALX_SERIAL}" "${ALX_REG_DATE}" "${CUR_MAC}"	if validate_serial "${ALX_SERIAL}" "${ALX_REG_DATE}" "${CUR_MAC}"
137	then	then
138	ALX_STATE="ok"	ALX_STATE="ok"
139	else	else
140		# abort on non valid serial
141	ALX_STATE="invalid serial"	ALX_STATE="invalid serial"
142		echo "ALX_STATE=\"${ALX_STATE}\"" > /etc/alxconfig-ng/state/state
143		show_invalid_serial_msg
144		exit 1
145	fi	fi
146
147	else	else
148	#run hardware detection	# run hardware detection
149	echo	echo
150	echo -e ${COLMAGENTA}"Preparing system for first boot"${COLDEFAULT}	if [[ ${ALX_FORCED_RECHECK} = true ]]
151		then
152		rc_mecho "Hardware autodetection forced by system-administrator"
153		# always disable CONFD_NETWORKING here
154		export ALX_CONFD_NETWORKING="false"
155		else
156		rc_mecho "Preparing system for first boot"
157		fi
158	ALX_HW_DETECT=true	ALX_HW_DETECT=true
159	/etc/init.d/hwdetect start	hwsetup
160
161	#set hostname to alx_default_hostname	# set hostname to alx_default_hostname
162		# use old hostname if this is a forced re-check
163		[[ ${ALX_FORCED_RECHECK} = true ]] && ALX_DEFAULT_HOSTNAME="$(< /etc/hostname)"
164	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx
165	HOSTNAME="${ALX_DEFAULT_HOSTNAME}"	HOSTNAME="${ALX_DEFAULT_HOSTNAME}"
166
167	#update the hostname on the system for sure	# update the hostname on the system for sure
168	echo "HOSTNAME=${HOSTNAME}" > /etc/hostname	echo "${HOSTNAME}" > /etc/hostname
169
170	#start preliminary networking (dhcp)	# start preliminary networking (dhcp)
171	preliminary_network start	preliminary_network start
172
173		# check if mysql server is reachable
174		# if not abort this script
175		if ! reach_mysql_server
176		then
177		preliminary_network stop
178		exit 1
179		fi
180
181
182	CUR_IP=$(/sbin/ifconfig eth0 | sed -n '/addr:/s/ [^r]*..//gp')	CUR_IP=$(/sbin/ifconfig eth0 | sed -n '/addr:/s/ [^r]*..//gp')
183	CUR_MAC=$(/sbin/ifconfig eth0 | grep HWaddr | cut -d ' ' -f11)	CUR_MAC=$(/sbin/ifconfig eth0 | grep HWaddr | cut -d ' ' -f11)
184	CUR_MTIME=$(date +%s)	CUR_MTIME=$(date +%s)
	echo -e ${COLOREDSTAR} "Trying to get new serial ..."
	#request new serial
	#ALX_REG_DATE="$(date +%F)"
	#we're using the mtime now (better for vaildating the serial)
	mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"insert into client_serials(
	mtime,
	mac
	)
	values(
	'${CUR_MTIME}',
	'${CUR_MAC}'
	);"
	#then validate and retrieve serial
	### warning must be changed that only the LAST ID will be fetched,  ###
	### or you get error if the computer name and date are the same     ###
	### you have more then one serial number than                       ###
	#not 100% working may get more than *one* id
	#ALX_SERIAL=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	# "select id from cfg_serial where datum='${ALX_REG_DATE}' and hostname='${HOSTNAME}'")
	#select highest id only (added max)
	ALX_SERIAL=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
	"select max(serial) from client_serials where mtime='${CUR_MTIME}' and mac='${CUR_MAC}'")
185
186	if [ "${ALX_SERIAL}" != NULL ]	# abort now if this is a forced re-check
187		if [[ ${ALX_FORCED_RECHECK} = true ]]
188	then	then
189	#nice serial output	# but first check the serial
190		source /etc/alxconfig-ng/serial
191
192		rc_print "Trying to validate my serial ..."
193
194		# nice serial output
195	$CURS_UP	$CURS_UP
196	$SET_WCOL	$SET_WCOL
197	echo "[ SN: ${ALX_SERIAL} ]"	echo "[ SN: ${ALX_SERIAL} ]"
198
199	#set ALX_STATE to ok so everybody that everything was ok	if validate_serial "${ALX_SERIAL}" "${ALX_REG_DATE}" "${CUR_MAC}"
200		then
201		ALX_STATE="ok"
202		else
203		# abort on non valid serial
204		ALX_STATE="invalid serial"
205		echo "ALX_STATE=${ALX_STATE}" > /etc/alxconfig-ng/state/state
206		show_invalid_serial_msg
207		exit 1
208		fi
209
210		# write current state to temp file
211		echo "ALX_STATE=\"${ALX_STATE}\"" > /etc/alxconfig-ng/state/state
212		[ -f /hardware-auto-detection ] && rm /hardware-auto-detection
213
214		# now export ALX_FORCED_RECHECK=true
215		# that the setting will be updated not inserted !
216		export ALX_FORCED_RECHECK=true
217		return 0
218		fi
219
220		rc_print "Trying to get new serial ..."
221
222		# request a new serial; one command now (cause must be done in the same session)
223		ALX_SERIAL=$(mysqldo "insert into client_serials (mtime, mac) values('${CUR_MTIME}','${CUR_MAC}');
224		select last_insert_id();")
225
226		if [[ ${ALX_SERIAL} != NULL ]]
227		then
228		# nice serial output
229		$CURS_UP
230		$SET_WCOL
231		echo "[ SN: ${ALX_SERIAL} ]"
232
233		# set ALX_STATE to ok so everybody knows that everything was ok
234	ALX_STATE=ok	ALX_STATE=ok
235
236	echo "ALX_SERIAL=${ALX_SERIAL}" > /etc/alx-config/serial	echo "ALX_SERIAL=\"${ALX_SERIAL}\"" > /etc/alxconfig-ng/serial
237	echo "ALX_REG_DATE=${CUR_MTIME}" >> /etc/alx-config/serial	echo "ALX_REG_DATE=\"${CUR_MTIME}\"" >> /etc/alxconfig-ng/serial
238
239	evaluate_retval	evaluate_retval
240	else	else
241	#print false (works only if this is the first statement here)	# print false (works only if this is the first statement here)
242	evaluate_retval	evaluate_retval
243
244	#set ALX_STATE to error so everybody sees there was an error	# set ALX_STATE to error so everybody sees there was an error
245	ALX_STATE=error	ALX_STATE=error
246
247	#show an error that no new serial was found	# show an error that no new serial was found
248	#nice serial output	# nice serial output
249	$CURS_UP	$CURS_UP
250	$SET_WCOL	$SET_WCOL
251	echo -e "[ SN: ${COLRED}None, 0${COLDEFAULT} ]"	echo -e "[ SN: ${COLRED}None, 0${COLDEFAULT} ]"
252	fi	fi
253	fi	fi
254
255	#write current state to temp file	# write current state to temp file
256	echo "ALX_STATE=${ALX_STATE}" > /etc/alx-config/state/state	echo "ALX_STATE=\"${ALX_STATE}\"" > /etc/alxconfig-ng/state/state
257		echo "ALX_IFACE=\"${ALX_IFACE}\"" >> /etc/alxconfig-ng/state/state
258	}	}
259
260
261	check_is_configured() {	check_is_configured()
262	if [ -f /etc/alx-config/state/configured ]	{
263		if [ -f /etc/alxconfig-ng/state/configured ]
264	then	then
265	export ALX_CONFIGURED=true	export ALX_CONFIGURED=true
266	else	else
#	Line 927  check_is_configured() {	Line 270  check_is_configured() {
270
271
272	# imports current settings to the database resolved by the hardware detection	# imports current settings to the database resolved by the hardware detection
273	import_settings_to_db() {	import_settings_to_db()
274	#note: networking is always 'dhcp' if hw was autodetected	{
275	#note: default_domain/hostname is set in config.rc	# note: networking is always 'dhcp' if hw was autodetected
276		# note: default_domain/hostname is set in config.rc
277	#to be safe, we do some sanity checks
278		# to be safe, we do some sanity checks
279	[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain	[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain
280	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx
281
282	#vars used by hwdetect	# vars used by hwsetup
283	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
284	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
285	local MOUSETYPE XMOUSETYPE FULLNAME DEVICE	local MOUSETYPE XMOUSETYPE FULLNAME DEVICE
286
287	#get setting from hwdetect	# get setting from hwsetup
288	source /etc/sysconfig/hwsetup/knoppix	source /etc/conf.d/hwsetup/knoppix
289	source /etc/sysconfig/hwsetup/mouse	source /etc/conf.d/hwsetup/mouse
290
291	echo	echo
292	echo -e ${COLMAGENTA}"Importing detected settings to database"${COLDEFAULT}	rc_mecho "Importing detected settings to database"
293
294	#network	# network
295	echo -e "      Network settings ..."	rc_mecho "      Network settings ..."
296	mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \	if [[ ${ALX_CONFD_NETWORKING} = true ]]
297	"insert into cfg_network(	then
298	hostname,	# get settings
299	serial,	for iface in $(onboot_interface_list ${network_settings}/net.*)
300	module,	do
301	domain,	[[ $(< ${SETTINGSPATH}/confd-networking) != ${iface} ]] && continue
302	networking	rc_echo "WARNING: only importing settings for interface [ ${iface} ] !"
303	)	source ${network_settings}/net.${iface} || echo "Error: could not read '${network_settings}/net.${iface}'"
304	values(	NETCARD_DRIVER="$(cat /etc/modprobe.d/net.${iface}.conf | cut -d' ' -f3)"
305	'${ALX_DEFAULT_HOSTNAME}',
306	'${ALX_SERIAL}',	mysqldo "insert into cfg_network(
307	'${NETCARD_DRIVER}',	hostname,
308	'${ALX_DEFAULT_DOMAIN}',	serial,
309	'dhcp'	module,
310	);"	domain,
311		networking,
312		netmask,
313		dns,
314		gateway,
315		broadcast,
316		ip,
317		forcemacto,
318		wireless_bitrate,
319		wireless_channel,
320		wireless_essid,
321		wireless_frequency,
322		wireless_mode,
323		wireless_nick,
324		wireless_auth_mode,
325		wireless_key_length,
326		wireless_key,
327		wireless_key_ascii
328		)
329		values(
330		'${ALX_DEFAULT_HOSTNAME}',
331		'${ALX_SERIAL}',
332		'${NETCARD_DRIVER}',
333		'${ALX_DEFAULT_DOMAIN}',
334		'${NETWORKING}',
335		'${NETMASK}',
336		'${NAMESERVER}',
337		'${GATEWAY}',
338		'${BROADCAST}',
339		'${IP}',
340		'${FORCE_MAC_TO}',
341		'${WIRELESS_BITRATE}',
342		'${WIRELESS_CHANNEL}',
343		'${WIRELESS_ESSID}',
344		'${WIRELESS_FREQUENCY}',
345		'${WIRELESS_MODE}',
346		'${WIRELESS_NICK}',
347		'${WIRELESS_AUTH_MODE}',
348		'${WIRELESS_KEY_LENGTH}',
349		'${WIRELESS_KEY}',
350		'${WIRELESS_KEY_ASCII}'
351		);"
352
353		# only insert the *FIRST* iface
354		break
355		done
356		else
357		mysqldo "insert into cfg_network(
358		hostname,
359		serial,
360		module,
361		domain,
362		networking
363		)
364		values(
365		'${ALX_DEFAULT_HOSTNAME}',
366		'${ALX_SERIAL}',
367		'${NETCARD_DRIVER}',
368		'${ALX_DEFAULT_DOMAIN}',
369		'dhcp'
370		);"
371		fi
372	evaluate_retval	evaluate_retval
373
374	#xserver	# xserver
375	echo -e "      Graphic settings ..."	rc_mecho "      Graphic settings ..."
376	#xserver general	# xserver general
377	( mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \	( mysqldo "insert into cfg_graphic(
	"insert into cfg_graphic(
378	serial,	serial,
379	module,	module,
380	resolution,	resolution,
381	depth	depth,
382		refresh_rate
383	)	)
384	values(	values(
385	'${ALX_SERIAL}',	'${ALX_SERIAL}',
386	'${XMODULE}',	'${XMODULE}',
387	'1024x768',	'1024x768',
388	'16'	'16',
389	);";	'60'
390	#xserver monitor	);"; )
391	mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \	evaluate_retval
392	"insert into cfg_monitor(
393		# input
394		rc_mecho "      Input settings ..."
395		mysqldo "insert into cfg_input(serial,mouse) values('${ALX_SERIAL}','${XMOUSETYPE}');"
396		evaluate_retval
397
398		# auth
399		rc_mecho "      Authentification settings ..."
400		mysqldo "insert into client_auth(
401	serial,	serial,
402	vendor,	username,
403	model,	shell,
404	hsync,	vnc,
405	vrefresh	samba,
406		station
407	)	)
408	values(	values(
409	'${ALX_SERIAL}',	'${ALX_SERIAL}',
410	'Aamazing',	'${ALX_UNPRIV_USER}',
411	'CM-1528-FS',	'',
412	'28-64',	'',
413	'47-104'	'',
414	);";	''
415		);"
416	# input	evaluate_retval
417	mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \
418	"insert into cfg_input(serial,mouse) values('${ALX_SERIAL}','${XMOUSETYPE}');";)	# exchange ssh rsa keys - the first boot needs this !
419		# or no reboot will work via the webadmin
420		rc_mecho "      SSH authentification settings ..."
421		HOME=/root config_ssh_auth
422		evaluate_retval
423
424		# autostart
425		rc_mecho "      Autostart settings ..."
426		mysqldo "insert into cfg_autostart(serial,session) values('${ALX_SERIAL}','');"
427
428		# screensaver
429		rc_mecho "      Screensaver settings ..."
430		mysqldo "insert into cfg_screensaver(serial,screensaver) values('${ALX_SERIAL}','')"
431
432		# version info
433		rc_mecho "      OS version info ..."
434		local alx_os
435		local alx_utils
436		alx_os="$(< /etc/mageversion)"
437		alx_utils="$(magequery -n alxconfig-ng-alx | sed 's:.*\[\ \(.*\)\ \].*:\1:')"
438		alx_utils="${alx_utils/alxconfig-ng-alx-}"
439		mysqldo "insert into client_version(serial,os,utils) values('${ALX_SERIAL}','${alx_os}','${alx_utils}')"
440
441	evaluate_retval	evaluate_retval
442	}	}
443
444	# imports current settings to the local system resolved by the hardware detection	# imports current settings to the database resolved by the hardware detection
445	import_settings_local(){	update_settings_in_db()
446	#note: networking is always 'dhcp' if hw was autodetected	{
447	#note: default_domain/hostname is set in config.rc	# note: networking is always 'dhcp' if hw was autodetected
448		# note: default_domain/hostname is set in config.rc or exported
449	#to be safe, we do some sanity checks	# note: we updating only hardware settings here !
450
451		# to be safe, we do some sanity checks
452	[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain	[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain
453	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx	[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx
454
455	#vars used by hwdetect	# vars used by hwsetup
456	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
457	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
458	local MOUSETYPE XMOUSETYPE FULLNAME DEVICE	local MOUSETYPE XMOUSETYPE FULLNAME DEVICE
459
460		# get setting from hwsetup
461	#get setting from hwdetect	source /etc/conf.d/hwsetup/knoppix
462	source /etc/sysconfig/hwsetup/knoppix	source /etc/conf.d/hwsetup/mouse
463	source /etc/sysconfig/hwsetup/mouse
464	echo	echo
465	echo -e ${COLMAGENTA}"Importing detected settings to local system"${COLDEFAULT}	rc_mecho "Updating detected settings in database"
466
467		# network
468	#allready configured, no update needed so we put it to system	rc_mecho "      Network settings ..."
469	SETTINGSPATH=${SETTINGS_TEMPLATE}/system	if [[ ${ALX_CONFD_NETWORKING} = true ]]
470		then
471		# get settings
472	#network	#source ${rc_base}/init.d/network &> /dev/null
473	echo -e "      Network settings ..."	for iface in $(onboot_interface_list ${network_settings}/net.*)
474		do
475		[[ $(< ${SETTINGSPATH}/confd-networking) != ${iface} ]] && continue
476		rc_echo "WARNING: only importing settings for interface [ ${iface} ] !"
477		source ${network_settings}/net.${iface} || exit 1
478		NETCARD_DRIVER="$(cat /etc/modprobe.d/net.${iface}.conf | cut -d' ' -f3)"
479
480		mysqldo "update cfg_network set
481		hostname='${ALX_DEFAULT_HOSTNAME}',
482		module='${NETCARD_DRIVER}',
483		domain='${ALX_DEFAULT_DOMAIN}',
484		networking='${NETWORKING}',
485		netmask='${NETMASK}',
486		dns='${NAMESERVER}',
487		gateway='${GATEWAY}',
488		broadcast='${BROADCAST}',
489		ip='${IP}',
490		forcemacto='${FORCE_MAC_TO}',
491		wireless_bitrate='${WIRELESS_BITRATE}',
492		wireless_channel='${WIRELESS_CHANNEL}',
493		wireless_essid='${WIRELESS_ESSID}',
494		wireless_frequency='${WIRELESS_FREQUENCY}',
495		wireless_mode='${WIRELESS_MODE}',
496		wireless_nick='${WIRELESS_NICK}',
497		wireless_auth_mode='${WIRELESS_AUTH_MODE}',
498		wireless_key_length='${WIRELESS_KEY_LENGTH}',
499		wireless_key='${WIRELESS_KEY}',
500		wireless_key_ascii='${WIRELESS_KEY_ASCII}'
501		where serial=${ALX_SERIAL};"
502
503	[ ! -d ${SETTINGSPATH}/modules ] && install -d ${SETTINGSPATH}/modules	# only insert the *FIRST* iface
504	echo "${NETCARD_DRIVER}" > ${SETTINGSPATH}/modules/modules	break
505		done
506	[ ! -d ${SETTINGSPATH}/network ] && install -d ${SETTINGSPATH}/network	else
507	( echo "${ALX_DEFAULT_HOSTNAME}" > ${SETTINGSPATH}/network/hostname;	mysqldo "update cfg_network set
508	echo "${ALX_DEFAULT_DOMAIN}" > ${SETTINGSPATH}/network/domain;	hostname='${ALX_DEFAULT_HOSTNAME}',
509	echo "dhcp" > ${SETTINGSPATH}/network/networking )	module='${NETCARD_DRIVER}',
510		domain='${ALX_DEFAULT_DOMAIN}',
511		networking='dhcp'
512		where serial=${ALX_SERIAL};"
513		fi
514	evaluate_retval	evaluate_retval
515
516		# xserver
517	#xserver	rc_mecho "      Graphic settings ..."
518	echo -e "      Graphic settings ..."	# xserver general
519		mysqldo "update cfg_graphic set
520	[ ! -d ${SETTINGSPATH}/vga ] && install -d ${SETTINGSPATH}/vga	module='${XMODULE}',
521	[ ! -d ${SETTINGSPATH}/mouse ] && install -d ${SETTINGSPATH}/mouse	resolution='1024x768',
522	[ ! -d ${SETTINGSPATH}/monitor ] && install -d ${SETTINGSPATH}/monitor	depth='16',
523	( echo "${XMODULE}" > ${SETTINGSPATH}/vga/vga;	refresh_rate='60'
524	echo "16" > ${SETTINGSPATH}/vga/vgadepth;	where serial=${ALX_SERIAL};"
	echo "1024x768" > ${SETTINGSPATH}/vga/vgares;
	echo "${XMOUSETYPE}" > ${SETTINGSPATH}/mouse/mouse;
	echo "myvendor=\"Aamazing\"" > ${SETTINGSPATH}/monitor/monitor;
	echo "mymodel=\"CM-1528-FS\"" >> ${SETTINGSPATH}/monitor/monitor;
	echo "hsync=\"28-64\"" >> ${SETTINGSPATH}/monitor/monitor;
	echo "vref=\"47-104\"" >> ${SETTINGSPATH}/monitor/monitor;)
525	evaluate_retval	evaluate_retval
526
527	#set system state to 'already configured'	# input
528	touch /etc/alx-config/state/configured	rc_mecho "      Input settings ..."
529		mysqldo "update cfg_input set mouse='${XMOUSETYPE}' where serial=${ALX_SERIAL};"
530		evaluate_retval
531
532		# version info
533		rc_mecho "      OS version info ..."
534		local alx_os
535		local alx_utils
536		alx_os="$(< /etc/mageversion)"
537		alx_utils="$(magequery -n alxconfig-ng-alx | sed 's:.*\[\ \(.*\)\ \].*:\1:')"
538		alx_utils="${alx_utils/alxconfig-ng-alx-}"
539		mysqldo "update client_version set os='${alx_os}', utils='${alx_utils}' where serial=${ALX_SERIAL};"
540	}	}
541
542	#start|stop	# imports current settings to the local system resolved by the hardware detection
543	preliminary_network(){	# we only need the network settings
544		import_settings_local()
545		{
546		# note: networking is always 'dhcp' if hw was autodetected
547		# note: default_domain/hostname is set in config.rc
548
549		# to be safe, we do some sanity checks
550		[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain
551		[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx
552
553		# vars used by hwsetup
554		local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
555		local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
556		local MOUSETYPE XMOUSETYPE FULLNAME DEVICE
557
558		# get setting from hwsetup
559		source /etc/conf.d/hwsetup/knoppix
560
561		echo
562		rc_mecho "Importing detected settings to local system"
563
564		if [[ ${ALX_CONFD_NETWORKING} = false ]]
565		then
566		# set an device alias for modprobe.conf
567		[ ! -d /etc/modprobe.d ] && install -d /etc/modprobe.d
568		echo "alias eth0 ${NETCARD_DRIVER}" > /etc/modprobe.d/net.eth0.conf
569
570		# regenerate modprobe.conf
571		[ -x $(which modules-update) ] && modules-update || rc_echo "modules-update not found!"
572		evaluate_retval
573		fi
574
575		# set system state to 'already configured'
576		touch /etc/alxconfig-ng/state/configured
577
578		# install slim desktopmanager configuration
579		config_display_manager
580
581		# if only an recheck was forced than abort now
582		[[ ${ALX_FORCED_RECHECK} = true ]] && return 0
583
584		# create a fresh fluxbox directory
585		[ -d ${ALX_UNPRIV_HOME}/.fluxbox ] && rm -rf ${ALX_UNPRIV_HOME}/.fluxbox
586		install -d ${ALX_UNPRIV_HOME}/.fluxbox
587
588		# now generate fluxbox config files
589
590		# fluxbox main config
591		cat ${ALX_SKELETONS}/fluxbox/init > ${ALX_UNPRIV_HOME}/.fluxbox/init
592
593		# fluxbox autostart
594		cat ${ALX_SKELETONS}/fluxbox/apps > ${ALX_UNPRIV_HOME}/.fluxbox/apps
595
596		# fluxbox menu header
597		cat ${ALX_SKELETONS}/fluxbox/menu.header > ${ALX_UNPRIV_HOME}/.fluxbox/menu
598
599		# now fix it with proper messages :P
600		local ver="$(< /etc/mageversion)"
601		sed -i "s:@CHANGEME@:alx-${ver}  #${ALX_SERIAL}:g" ${ALX_UNPRIV_HOME}/.fluxbox/menu
602
603		# add a newline (maybe there is no crlf in the header)
604		echo >> ${ALX_UNPRIV_HOME}/.fluxbox/menu
605
606		# fluxbox menu footer
607		cat ${ALX_SKELETONS}/fluxbox/menu.footer >> ${ALX_UNPRIV_HOME}/.fluxbox/menu
608
609		# add a newline (maybe there is no crlf in the footer)
610		echo >> ${ALX_UNPRIV_HOME}/.fluxbox/menu
611
612
613		# setup some standart icons (sysinfo.lnk)
614		# basic config
615		cat ${ALX_SKELETONS}/xtdesktop/xtdeskrc > ${ALX_UNPRIV_HOME}/.xtdeskrc
616
617		# clean desktop icon location
618		[ -d ${ALX_UNPRIV_HOME}/.xtdesktop ] && rm -rf ${ALX_UNPRIV_HOME}/.xtdesktop
619		install -d ${ALX_UNPRIV_HOME}/.xtdesktop
620
621		# last but not least gen a icon with some sys informations
622		local sysinfo
623		local osversion
624		local xres
625		local yres
626
627		osversion="$(< /etc/mageversion)"
628		sysinfo="Hostname: ${ALX_DEFAULT_HOSTNAME} Serial: #${ALX_SERIAL} OS: alx-${osversion} Kernel: $(uname -r)"
629
630		# at first boot we got always a resolution of 1024x768-16@60
631		# middle of the screen
632		# (no txt - length required, xtdesk manage that itself)
633		xres="$((1024 / 2))"
634		# default y pos (full yres -22 !)
635		yres="$((768 - 22 ))"
636
637		generate_icon \
638		--name "${sysinfo}" \
639		--command "exit 0" \
640		--icon "${ALX_SESSIONS_ICONS}/sysinfo.png" \
641		--dest "${ALX_UNPRIV_HOME}/.xtdesktop/sysinfo.lnk" \
642		--xres "${xres}" \
643		--yres "${yres}" \
644		--icon-width "1" \
645		--icon-height "1"
646
647		# create a xinitrc
648		echo "exec startfluxbox" > ${ALX_UNPRIV_HOME}/.xinitrc
649
650		# set correct permissions
651		chown ${ALX_UNPRIV_USER}:${ALX_UNPRIV_GROUP} ${ALX_UNPRIV_HOME}
652		chown ${ALX_UNPRIV_USER}:${ALX_UNPRIV_GROUP} ${ALX_UNPRIV_HOME}/.fluxbox
653		chmod 0755 ${ALX_UNPRIV_HOME}/.fluxbox
654		chmod 0755 ${ALX_UNPRIV_HOME}/.xtdesktop
655		chmod 0644 ${ALX_UNPRIV_HOME}/.xtdeskrc
656		chmod 0644 ${ALX_UNPRIV_HOME}/.xinitrc
657		}
658
659		# start|stop
660		preliminary_network()
661		{
662	local module	local module
663
664	if [ -f /etc/alx-config/state/configured ]	if [ -f /etc/alxconfig-ng/state/configured ]
665	then	then
666	#get module name	# compat for old clients
667	module=$(cat ${SETTINGS_TEMPLATE}/system/modules/modules)	if [ -f ${SETTINGSPATH}/modules ]
668	modprobe ${module}	then
669		# get module name
670		module=$(cat ${SETTINGSPATH}/modules)
671		modprobe ${module}
672		fi
673
674	else	else
675	#vars used by hwdetect	# vars used by hwsetup
676	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
677	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
678
679	#get setting from hwdetect	# get setting from hwsetup
680	source /etc/sysconfig/hwsetup/knoppix	source /etc/conf.d/hwsetup/knoppix
681	modprobe ${NETCARD_DRIVER}	modprobe ${NETCARD_DRIVER}
682	fi	fi
683
684	case $1 in	case $1 in
685	start)	start)
686	# keeping like always safe:	# keeping like always safe:
687	# no network should be startet here,	# no network should be startet here,
688	# so we can delete all pid files if one exists	# so we can delete all pid files if one exists
689	if ps -A|grep dhcpcd > /dev/null	if [[ ! -z $(pidof $(basename ${ALX_DHCP_PROG})) ]]
690	then	then
691	echo -e ${COLMAGENTA}"Forcing network down"${COLDEFAULT}	rc_mecho "Forcing network down"
692	dhcpcd -k	killall $(basename ${ALX_DHCP_PROG}) &> /dev/null
693	sleep 1	sleep 1
694		fi
695		[[ ${ALX_CONFD_NETWORKING} = true ]] && ${rc_base}/init.d/network stop
696
697		rc_mecho "Starting preliminary networking ... "
698
699		# start network configured from /etc/conf.d
700		if [[ ${ALX_CONFD_NETWORKING} = true ]]
701		then
702		${rc_base}/init.d/network start
703	else	else
704	rm -f /var/run/dhcpcd-eth?.pid	rc_print "Starting default dhcp based networking ... "
705		${ALX_DHCP_PROG} ${ALX_DHCP_START} &> /dev/null
706		evaluate_retval
707	fi	fi
	echo -e ${COLMAGENTA}"Starting preliminary network ... "${COLDEFAULT}
	#dhcpcd &> /dev/null #&& echo "ok" || echo "false"
	# aka_fix ########################################
	ifconfig eth0 128.20.222.222 netmask 255.255.0.0 up
	route del default gw 128.20.50.13 &> /dev/null
	route add default gw 128.20.50.21 &> /dev/null
	echo "nameserver 128.20.50.21" > /etc/resolv.conf
	##################################################
	evaluate_retval
708	;;	;;
709
710	stop)	stop)
711	echo -e ${COLMAGENTA}"Stopping preliminary network ... "${COLDEFAULT}	rc_mecho "Stopping preliminary networking ... "
712	ifconfig eth0 down	if [[ ${ALX_CONFD_NETWORKING} = true ]]
713	if ps -A|grep dhcpcd > /dev/null	then
714		${rc_base}/init.d/network stop
715		else
716		rc_print "Stopping default dhcp based networking ... "
717		ifconfig ${ALX_IFACE} down
718		fi
719		if [[ ! -z $(pidof $(basename ${ALX_DHCP_PROG})) ]]
720	then	then
721	#echo -en ${COLMAGENTA}"Stopping preliminary network ... "${COLDEFAULT}	killall $(basename ${ALX_DHCP_PROG}) &> /dev/null
722	dhcpcd -z  &> /dev/null	sleep 1
723	fi	fi
724	evaluate_retval	evaluate_retval
725	;;	;;
726
727	*)	*)
728	echo "Usage: preliminary_network {start|stop}"	echo "Usage: preliminary_network {start|stop}"
729	;;	;;
730	esac	esac
731	}	}
732
733		reset_system_settings()
734		{
735		# force load of de kbdkeys
736		loadkeys -q de
737		rc_echo
738		rc_echo -en ${COLRED}
739		rc_echo -n "*** Warning: you are about to reset *all* local settings on this system!"
740		rc_echo -e ${COLDEFAULT}
741		rc_echo "*** Do you really want to continue ?"
742		rc_echo -n "*** Enter 'yes' to continue, anything else to abort: "
743		read kbinsert
744		if [[ ${kbinsert} = yes ]]
745		then
746		rc_echo -en ${COLRED}
747		rc_echo -n "*** OK, you really want it ... killing all settings: "
748		for i in 3 2 1 now
749		do
750		rc_echo -n " ${i}"
751		sleep 1
752		done
753		rc_echo -e ${COLDEFAULT}
754
755		## reset all settings:
756		rm -rf ${SETTINGSPATH}/*
757		rm -f /etc/alxconfig-ng/serial
758		rm -rf /etc/alxconfig-ng/state
759
760		# clear all printers & net-shares
761		:> /etc/printcap
762
763		# remove lprng
764		rc-config del lprng &> /dev/null
765
766		# remove all user settings
767		[ -d ${ALX_UNPRIV_HOME} ] && rm -rf ${ALX_UNPRIV_HOME}
768
769		# remove all ica-sessions
770		find ${ALX_ICA_SESSIONS} -type f -name '*.ica' | xargs rm
771
772		# remove all old nics and modules configs
773		find /etc/conf.d -type f -name 'net.*' | xargs rm
774		find /etc/modprobe.d -type f -name 'net.*' | xargs rm
775
776		# restore default networking
777		cat ${ALX_SKELETONS}/net/net.eth0 > /etc/conf.d/net.eth0
778
779		rc_echo "I am done now, press [Enter] to reboot system ..."
780		else
781		rc_echo "Aborted, press [Enter] to reboot system ..."
782		fi
783		read
784		reboot
785		}
786
787		onboot_interface_list()
788		{
789		local file
790		local devices
791		local iface
792
793		# get list of all devices
794		for file in $@
795		do
796		if [[ $(read_value ONBOOT ${file}) = yes ]]
797		then
798		iface="$(basename ${file} | sed s/net.//)"
799		# exclude backup files
800		case "${iface}" in
801		*~) ;;
802		*) devices="${devices} $(basename ${file} | sed s/net.//)" ;;
803		esac
804		fi
805		done
806
807		echo "${devices}"
808		}
809
810		# read values from net.* files
811		read_value()
812		{
813		local var="$1"
814		local file="$2"
815		local value
816
817		# local all possible vars
818		# global
819		local ONBOOT
820		local NETWORKING
821
822		# static
823		local IP
824		local NETMASK
825		local BROADCAST
826		local NETWORKING
827		local FORCE_MAC_TO
828
829		# dhcp
830		local DHCP_PROG
831		local DHCP_START
832		local DHCP_STOP
833
834		# default gw
835		local GATEWAY
836		local GATEWAY_IF
837
838		# wireless extensions
839		local WIRELESS_AP
840		local WIRELESS_AUTH_MODE
841		local WIRELESS_BITRATE
842		local WIRELESS_CHANNEL
843		local WIRELESS_DEFAULT_KEY
844		local WIRELESS_ESSID
845		local WIRELESS_FREQUENCY
846		local WIRELESS_KEY
847		local WIRELESS_KEY_ASCII
848		local WIRELESS_KEY_0
849		local WIRELESS_KEY_1
850		local WIRELESS_KEY_2
851		local WIRELESS_KEY_3
852		local WIRELESS_KEY_LENGTH
853		local WIRELESS_MODE
854		local WIRELESS_NICK
855		local WIRELESS_NWID
856		local WIRELESS_POWER
857
858		source ${file}
859		eval value=\$$(echo ${var})
860		echo "${value}"
861		}
862
863	case $1 in	case $1 in
864	start)	start)
865	#retrieve or validate current serial	# check for global overrides
866		[ -f ${SETTINGSPATH}/confd-networking ] && ALX_CONFD_NETWORKING=true
867		[ -f /hardware-auto-detection ] && ALX_FORCED_RECHECK=true
868		read_cmdline hardware-auto-detection && ALX_FORCED_RECHECK=true
869		read_cmdline alx-reset-settings && ALX_RESET_SETTINGS=true
870
871		# kill all settings if requested
872		if [[ ${ALX_RESET_SETTINGS} = true ]]
873		then
874		reset_system_settings
875		fi
876
877		# retrieve or validate current serial
878	get_system_serial	get_system_serial
879	if [ "${ALX_HW_DETECT}" == "true" ]	if [[ ${ALX_HW_DETECT} = true ]]
880	then	then
881	import_settings_to_db	if [[ ${ALX_FORCED_RECHECK} = true ]]
882		then
883		update_settings_in_db
884		else
885		import_settings_to_db
886		fi
887	import_settings_local	import_settings_local
888
889		# here we should also exchange the ssh keys
890		# or the system cannot be rebooted after
891		# the first start via the alx-webadmin
892		config_ssh_auth
893	fi	fi
	#now setup system configuration
	#alx_setup_or_whatever_it_will_be_called()
	[ "${ALX_HW_DETECT}" == "false" ] && update_system_settings
894
895	#stop at last the preliminary networking (dhcp)	# now setup system configuration
896		# alx_setup_or_whatever_it_will_be_called()
897		[[ ${ALX_HW_DETECT} = false ]] && update_system_settings
898
899		# stop at last the preliminary networking (dhcp)
900	preliminary_network stop	preliminary_network stop
901	;;	;;
902
903	stop)	stop)
904	#unset_alx_connected #--> now in alxsetstate-rc6	# unset_alx_connected #--> now in alxsetstate-rc6
905	# ! important !: del systemstate	# ! important !: del systemstate
906	[ -f /etc/alx-config/state/state ] && rm /etc/alx-config/state/state	[ -f /etc/alxconfig-ng/state/state ] && rm /etc/alxconfig-ng/state/state
907	sleep 0.1	sleep 0.1
908	;;	;;
909
910	*)	*)
911	echo "Usage: $0 {start|stop} ..."	echo "Usage: $0 {start|stop} ..."
912	;;	;;

---

Colored Diff Long Colored Diff Full Colored Diff Unidiff Context Diff Side by Side

Legend: Removed from v.221   changed lines   Added in v.2156