Magellan Linux

  • Back to homepage
    • /[alx-svn]/alx-src/branches/alxconf_20060908/init.d/alxsettings

    Contents of /alx-src/branches/alxconf_20060908/init.d/alxsettings

    Parent Directory Parent Directory | Revision Log Revision Log

    Revision 1622 - (show annotations) (download)
    Thu Dec 9 09:06:33 2010 UTC (13 years, 4 months ago) by niro
    File size: 23842 byte(s) 
    -create a modprobe.d module alias for eth0 too, which gets included in modprobe.conf for newer kernels
-always disable ALX_CONFD_NETWORKING while re-running hardware detection
    1 #!/bin/bash
    2
    3 # <niro@magellan-linux.de>
    4
    5 #%rlevels: 7:s 0:k 6:k
    6 #%start: 41
    7 #%stop: 01
    8
    9 #deps
    10 #%needs:
    11 #%before:
    12 #%after:
    13
    14 # $Header: /home/cvsd/alx-cvs/alx-src/alxconfig-ng/init.d/alxsettings,v 1.27 2005-10-11 12:10:15 niro Exp $
    15
    16 # checks first if the client was already configured and if it has an valid serial
    17 # if not it runs the autoconfiguration script
    18 # these settings will be used for client setup
    19 #
    20 # if client was valid it first will check if his settings against the server
    21 # if no changes are at server side they will be kept, if yes the get updated.
    22 # the server settings has higher priority.
    23
    24 source /etc/sysconfig/rc
    25 source $rc_functions
    26
    27 # mysql settings
    28 source /etc/alxconfig-ng/config.rc
    29
    30 # helper functions
    31 source /usr/lib/alxconfig-ng/functions/mysqlfunctions
    32 source /usr/lib/alxconfig-ng/functions/serial_functions
    33 source /usr/lib/alxconfig-ng/functions/config_modules
    34 source /usr/lib/alxconfig-ng/functions/config_network
    35 source /usr/lib/alxconfig-ng/functions/config_printers
    36 source /usr/lib/alxconfig-ng/functions/config_sessions
    37 source /usr/lib/alxconfig-ng/functions/config_x11
    38 source /usr/lib/alxconfig-ng/functions/config_auth
    39 source /usr/lib/alxconfig-ng/functions/config_ssh_auth
    40 source /usr/lib/alxconfig-ng/functions/config_versions
    41
    42 # check if mysql is available
    43 [ -x /usr/bin/mysql ] && MYSQL_ALX=true
    44
    45 # other needed vars
    46 ALX_HW_DETECT=false
    47 ALX_FORCED_RECHECK=false
    48 ALX_RESET_SETTINGS=false
    49 ALX_CONFD_NETWORKING=false
    50
    51 # unset vars which may kill us
    52 unset ALX_SERIAL ALX_STATE
    53
    54
    55 # setup needed directories
    56 [ ! -d /etc/alxconfig-ng/state ] && install -d /etc/alxconfig-ng/state
    57
    58
    59 # read_cmdline ${item}
    60 read_cmdline()
    61 {
    62 local i
    63
    64 for i in $(< /proc/cmdline)
    65 do
    66 [[ ${i} = $1 ]] && return 0
    67 done
    68
    69 return 1
    70 }
    71
    72 update_system_settings()
    73 {
    74 echo -e ${COLMAGENTA}"Checking system setup ..."${COLDEFAULT}
    75
    76 # get the modules settings
    77 # ! is the first thing that must be configured !
    78 config_modules
    79
    80 # imports network settings from db
    81 config_networking
    82
    83 # imports x11 settings from db
    84 config_x11
    85
    86 # imports session settings from db
    87 config_sessions
    88
    89 # imports printer settings from db
    90 config_printing
    91
    92 # imports auth settings from db
    93 config_auth
    94
    95 # exchange ssh rsa keys
    96 HOME=/root config_ssh_auth
    97
    98 # import version info
    99 config_version
    100 }
    101
    102 get_system_serial()
    103 {
    104 local CUR_IP CUR_MAC CUR_MTIME ALX_IFACE
    105
    106 if [[ ${ALX_CONFD_NETWORKING} = true ]]
    107 then
    108 ALX_IFACE="$(< ${SETTINGSPATH}/confd-networking)"
    109 else
    110 ALX_IFACE="eth0"
    111 fi
    112
    113 # check if serial file exists
    114 if [ -f /etc/alxconfig-ng/serial ] && [[ ${ALX_FORCED_RECHECK} = false ]]
    115 then
    116 source /etc/alxconfig-ng/serial
    117
    118 # start preliminary networking (dhcp)
    119 preliminary_network start
    120
    121 # check if mysql server is reachable
    122 # if not abort this script
    123 if ! reach_mysql_server
    124 then
    125 preliminary_network stop
    126 exit 1
    127 fi
    128
    129 CUR_IP=$(/sbin/ifconfig ${ALX_IFACE} | sed -n '/addr:/s/ [^r]*..//gp')
    130 CUR_MAC=$(/sbin/ifconfig ${ALX_IFACE} | grep HWaddr | cut -d ' ' -f11)
    131 CUR_MTIME=$(date +%s)
    132
    133 echo -e ${COLOREDSTAR} "Trying to validate my serial ..."
    134
    135 # nice serial output
    136 $CURS_UP
    137 $SET_WCOL
    138 echo "[ SN: ${ALX_SERIAL} ]"
    139
    140 if validate_serial "${ALX_SERIAL}" "${ALX_REG_DATE}" "${CUR_MAC}"
    141 then
    142 ALX_STATE="ok"
    143 else
    144 # abort on non valid serial
    145 ALX_STATE="invalid serial"
    146 echo "ALX_STATE=\"${ALX_STATE}\"" > /etc/alxconfig-ng/state/state
    147 show_invalid_serial_msg
    148 exit 1
    149 fi
    150
    151 else
    152 # run hardware detection
    153 echo
    154 if [[ ${ALX_FORCED_RECHECK} = true ]]
    155 then
    156 echo -e ${COLMAGENTA}"Hardware autodetection forced by system-administrator"${COLDEFAULT}
    157 # always disable CONFD_NETWORKING here
    158 export ALX_CONFD_NETWORKING="false"
    159 else
    160 echo -e ${COLMAGENTA}"Preparing system for first boot"${COLDEFAULT}
    161 fi
    162 ALX_HW_DETECT=true
    163 /etc/init.d/hwdetect start
    164
    165 # set hostname to alx_default_hostname
    166 # use old hostname if this is a forced re-check
    167 [[ ${ALX_FORCED_RECHECK} = true ]] && ALX_DEFAULT_HOSTNAME="$(< /etc/hostname)"
    168 [ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx
    169 HOSTNAME="${ALX_DEFAULT_HOSTNAME}"
    170
    171 # update the hostname on the system for sure
    172 echo "${HOSTNAME}" > /etc/hostname
    173
    174 # start preliminary networking (dhcp)
    175 preliminary_network start
    176
    177 # check if mysql server is reachable
    178 # if not abort this script
    179 if ! reach_mysql_server
    180 then
    181 preliminary_network stop
    182 exit 1
    183 fi
    184
    185 CUR_IP=$(/sbin/ifconfig eth0 | sed -n '/addr:/s/ [^r]*..//gp')
    186 CUR_MAC=$(/sbin/ifconfig eth0 | grep HWaddr | cut -d ' ' -f11)
    187 CUR_MTIME=$(date +%s)
    188
    189 # abort now if this is a forced re-check
    190 if [[ ${ALX_FORCED_RECHECK} = true ]]
    191 then
    192 # but first check the serial
    193 source /etc/alxconfig-ng/serial
    194
    195 echo -e ${COLOREDSTAR} "Trying to validate my serial ..."
    196
    197 # nice serial output
    198 $CURS_UP
    199 $SET_WCOL
    200 echo "[ SN: ${ALX_SERIAL} ]"
    201
    202 if validate_serial "${ALX_SERIAL}" "${ALX_REG_DATE}" "${CUR_MAC}"
    203 then
    204 ALX_STATE="ok"
    205 else
    206 # abort on non valid serial
    207 ALX_STATE="invalid serial"
    208 echo "ALX_STATE=${ALX_STATE}" > /etc/alxconfig-ng/state/state
    209 show_invalid_serial_msg
    210 exit 1
    211 fi
    212
    213 # write current state to temp file
    214 echo "ALX_STATE=\"${ALX_STATE}\"" > /etc/alxconfig-ng/state/state
    215 [ -f /hardware-auto-detection ] && rm /hardware-auto-detection
    216
    217 # now export ALX_FORCED_RECHECK=true
    218 # that the setting will be updated not inserted !
    219 export ALX_FORCED_RECHECK=true
    220 return 0
    221 fi
    222
    223 echo -e ${COLOREDSTAR} "Trying to get new serial ..."
    224
    225 # request a new serial; one command now (cause must be done in the same session)
    226 ALX_SERIAL=$(mysqldo "insert into client_serials (mtime, mac) values('${CUR_MTIME}','${CUR_MAC}');
    227 select last_insert_id();")
    228
    229 if [[ ${ALX_SERIAL} != NULL ]]
    230 then
    231 # nice serial output
    232 $CURS_UP
    233 $SET_WCOL
    234 echo "[ SN: ${ALX_SERIAL} ]"
    235
    236 # set ALX_STATE to ok so everybody knows that everything was ok
    237 ALX_STATE=ok
    238
    239 echo "ALX_SERIAL=\"${ALX_SERIAL}\"" > /etc/alxconfig-ng/serial
    240 echo "ALX_REG_DATE=\"${CUR_MTIME}\"" >> /etc/alxconfig-ng/serial
    241
    242 evaluate_retval
    243 else
    244 # print false (works only if this is the first statement here)
    245 evaluate_retval
    246
    247 # set ALX_STATE to error so everybody sees there was an error
    248 ALX_STATE=error
    249
    250 # show an error that no new serial was found
    251 # nice serial output
    252 $CURS_UP
    253 $SET_WCOL
    254 echo -e "[ SN: ${COLRED}None, 0${COLDEFAULT} ]"
    255 fi
    256 fi
    257
    258 # write current state to temp file
    259 echo "ALX_STATE=\"${ALX_STATE}\"" > /etc/alxconfig-ng/state/state
    260 echo "ALX_IFACE=\"${ALX_IFACE}\"" >> /etc/alxconfig-ng/state/state
    261 }
    262
    263
    264 check_is_configured()
    265 {
    266 if [ -f /etc/alxconfig-ng/state/configured ]
    267 then
    268 export ALX_CONFIGURED=true
    269 else
    270 export ALX_CONFIGURED=false
    271 fi
    272 }
    273
    274
    275 # imports current settings to the database resolved by the hardware detection
    276 import_settings_to_db()
    277 {
    278 # note: networking is always 'dhcp' if hw was autodetected
    279 # note: default_domain/hostname is set in config.rc
    280
    281 # to be safe, we do some sanity checks
    282 [ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain
    283 [ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx
    284
    285 # vars used by hwdetect
    286 local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
    287 local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
    288 local MOUSETYPE XMOUSETYPE FULLNAME DEVICE
    289
    290 # get setting from hwdetect
    291 source /etc/sysconfig/hwsetup/knoppix
    292 source /etc/sysconfig/hwsetup/mouse
    293
    294 echo
    295 echo -e ${COLMAGENTA}"Importing detected settings to database"${COLDEFAULT}
    296
    297 # network
    298 echo -e " Network settings ..."
    299 if [[ ${ALX_CONFD_NETWORKING} = true ]]
    300 then
    301 # get settings
    302 #source ${rc_base}/init.d/network &> /dev/null
    303 for iface in $(onboot_interface_list ${network_settings}/net.*)
    304 do
    305 [[ $(< ${SETTINGSPATH}/confd-networking) != ${iface} ]] && continue
    306 echo "WARNING: only importing settings for interface [ ${iface} ] !"
    307 source ${network_settings}/net.${iface} || exit 1
    308 NETCARD_DRIVER="$(cat /etc/modules.d/net.${iface} | cut -d' ' -f3)"
    309
    310 mysqldo "insert into cfg_network(
    311 hostname,
    312 serial,
    313 module,
    314 domain,
    315 networking,
    316 netmask,
    317 dns,
    318 gateway,
    319 broadcast,
    320 ip,
    321 forcemacto,
    322 wireless_bitrate,
    323 wireless_channel,
    324 wireless_essid,
    325 wireless_frequency,
    326 wireless_mode,
    327 wireless_nick,
    328 wireless_auth_mode,
    329 wireless_key_length,
    330 wireless_key,
    331 wireless_key_ascii
    332 )
    333 values(
    334 '${ALX_DEFAULT_HOSTNAME}',
    335 '${ALX_SERIAL}',
    336 '${NETCARD_DRIVER}',
    337 '${ALX_DEFAULT_DOMAIN}',
    338 '${NETWORKING}',
    339 '${NETMASK}',
    340 '${NAMESERVER}',
    341 '${GATEWAY}',
    342 '${BROADCAST}',
    343 '${IP}',
    344 '${FORCE_MAC_TO}',
    345 '${WIRELESS_BITRATE}',
    346 '${WIRELESS_CHANNEL}',
    347 '${WIRELESS_ESSID}',
    348 '${WIRELESS_FREQUENCY}',
    349 '${WIRELESS_MODE}',
    350 '${WIRELESS_NICK}',
    351 '${WIRELESS_AUTH_MODE}',
    352 '${WIRELESS_KEY_LENGTH}',
    353 '${WIRELESS_KEY}',
    354 '${WIRELESS_KEY_ASCII}'
    355 );"
    356
    357 # only insert the *FIRST* iface
    358 break
    359 done
    360 else
    361 mysqldo "insert into cfg_network(
    362 hostname,
    363 serial,
    364 module,
    365 domain,
    366 networking
    367 )
    368 values(
    369 '${ALX_DEFAULT_HOSTNAME}',
    370 '${ALX_SERIAL}',
    371 '${NETCARD_DRIVER}',
    372 '${ALX_DEFAULT_DOMAIN}',
    373 'dhcp'
    374 );"
    375 fi
    376 evaluate_retval
    377
    378 # xserver
    379 echo -e " Graphic settings ..."
    380 # xserver general
    381 ( mysqldo "insert into cfg_graphic(
    382 serial,
    383 module,
    384 resolution,
    385 depth,
    386 refresh_rate
    387 )
    388 values(
    389 '${ALX_SERIAL}',
    390 '${XMODULE}',
    391 '1024x768',
    392 '16',
    393 '60'
    394 );"; )
    395 evaluate_retval
    396
    397 # input
    398 echo -e " Input settings ..."
    399 mysqldo "insert into cfg_input(serial,mouse) values('${ALX_SERIAL}','${XMOUSETYPE}');"
    400 evaluate_retval
    401
    402 # auth
    403 echo -e " Authentification settings ..."
    404 mysqldo "insert into client_auth(
    405 serial,
    406 username,
    407 shell,
    408 vnc,
    409 samba,
    410 station
    411 )
    412 values(
    413 '${ALX_SERIAL}',
    414 '${ALX_UNPRIV_USER}',
    415 '',
    416 '',
    417 '',
    418 ''
    419 );"
    420 evaluate_retval
    421
    422 # exchange ssh rsa keys - the first boot needs this !
    423 # or no reboot will work via the webadmin
    424 echo -e " SSH authentification settings ..."
    425 HOME=/root config_ssh_auth
    426 evaluate_retval
    427
    428 # autostart
    429 echo -e " Autostart settings ..."
    430 mysqldo "insert into cfg_autostart(serial,session) values('${ALX_SERIAL}','');"
    431
    432 # screensaver
    433 echo -e " Screensaver settings ..."
    434 mysqldo "insert into cfg_screensaver(serial,screensaver) values('${ALX_SERIAL}','')"
    435
    436 # version info
    437 local alx_os
    438 local alx_utils
    439 alx_os="$(< /etc/mageversion)"
    440 alx_utils="$(magequery -n alxconfig-ng-alx | sed 's:.*\[\ \(.*\)\ \].*:\1:')"
    441 alx_utils="${alx_utils/alxconfig-ng-alx-}"
    442 mysqldo "insert into client_version(serial,os,utils) values('${ALX_SERIAL}','${alx_os}','${alx_utils}')"
    443
    444 evaluate_retval
    445 }
    446
    447 # imports current settings to the database resolved by the hardware detection
    448 update_settings_in_db()
    449 {
    450 # note: networking is always 'dhcp' if hw was autodetected
    451 # note: default_domain/hostname is set in config.rc or exported
    452 # note: we updating only hardware settings here !
    453
    454 # to be safe, we do some sanity checks
    455 [ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain
    456 [ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx
    457
    458 # vars used by hwdetect
    459 local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
    460 local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
    461 local MOUSETYPE XMOUSETYPE FULLNAME DEVICE
    462
    463 # get setting from hwdetect
    464 source /etc/sysconfig/hwsetup/knoppix
    465 source /etc/sysconfig/hwsetup/mouse
    466
    467 echo
    468 echo -e ${COLMAGENTA}"Updating detected settings in database"${COLDEFAULT}
    469
    470 # network
    471 echo -e " Network settings ..."
    472 if [[ ${ALX_CONFD_NETWORKING} = true ]]
    473 then
    474 # get settings
    475 #source ${rc_base}/init.d/network &> /dev/null
    476 for iface in $(onboot_interface_list ${network_settings}/net.*)
    477 do
    478 [[ $(< ${SETTINGSPATH}/confd-networking) != ${iface} ]] && continue
    479 echo "WARNING: only importing settings for interface [ ${iface} ] !"
    480 source ${network_settings}/net.${iface} || exit 1
    481 NETCARD_DRIVER="$(cat /etc/modules.d/net.${iface} | cut -d' ' -f3)"
    482
    483 mysqldo "update cfg_network set
    484 hostname='${ALX_DEFAULT_HOSTNAME}',
    485 module='${NETCARD_DRIVER}',
    486 domain='${ALX_DEFAULT_DOMAIN}',
    487 networking='${NETWORKING}',
    488 netmask='${NETMASK}',
    489 dns='${NAMESERVER}',
    490 gateway='${GATEWAY}',
    491 broadcast='${BROADCAST}',
    492 ip='${IP}',
    493 forcemacto='${FORCE_MAC_TO}',
    494 wireless_bitrate='${WIRELESS_BITRATE}',
    495 wireless_channel='${WIRELESS_CHANNEL}',
    496 wireless_essid='${WIRELESS_ESSID}',
    497 wireless_frequency='${WIRELESS_FREQUENCY}',
    498 wireless_mode='${WIRELESS_MODE}',
    499 wireless_nick='${WIRELESS_NICK}',
    500 wireless_auth_mode='${WIRELESS_AUTH_MODE}',
    501 wireless_key_length='${WIRELESS_KEY_LENGTH}',
    502 wireless_key='${WIRELESS_KEY}',
    503 wireless_key_ascii='${WIRELESS_KEY_ASCII}'
    504 where serial=${ALX_SERIAL};"
    505
    506 # only insert the *FIRST* iface
    507 break
    508 done
    509 else
    510 mysqldo "update cfg_network set
    511 hostname='${ALX_DEFAULT_HOSTNAME}',
    512 module='${NETCARD_DRIVER}',
    513 domain='${ALX_DEFAULT_DOMAIN}',
    514 networking='dhcp'
    515 where serial=${ALX_SERIAL};"
    516 fi
    517 evaluate_retval
    518
    519 # xserver
    520 echo -e " Graphic settings ..."
    521 # xserver general
    522 mysqldo "update cfg_graphic set
    523 module='${XMODULE}',
    524 resolution='1024x768',
    525 depth='16',
    526 refresh_rate='60'
    527 where serial=${ALX_SERIAL};"
    528 evaluate_retval
    529
    530 # input
    531 echo -e " Input settings ..."
    532 mysqldo "update cfg_input set mouse='${XMOUSETYPE}' where serial=${ALX_SERIAL};"
    533 evaluate_retval
    534
    535 # version info
    536 local alx_os
    537 local alx_utils
    538 alx_os="$(< /etc/mageversion)"
    539 alx_utils="$(magequery -n alxconfig-ng-alx | sed 's:.*\[\ \(.*\)\ \].*:\1:')"
    540 alx_utils="${alx_utils/alxconfig-ng-alx-}"
    541 mysqldo "update client_version set os='${alx_os}', utils='${alx_utils}' where serial=${ALX_SERIAL};"
    542 }
    543
    544 # imports current settings to the local system resolved by the hardware detection
    545 # we only need the network settings
    546 import_settings_local()
    547 {
    548 # note: networking is always 'dhcp' if hw was autodetected
    549 # note: default_domain/hostname is set in config.rc
    550
    551 # to be safe, we do some sanity checks
    552 [ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain
    553 [ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx
    554
    555 # vars used by hwdetect
    556 local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
    557 local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
    558 local MOUSETYPE XMOUSETYPE FULLNAME DEVICE
    559
    560 # get setting from hwdetect
    561 source /etc/sysconfig/hwsetup/knoppix
    562
    563 echo
    564 echo -e ${COLMAGENTA}"Importing detected settings to local system"${COLDEFAULT}
    565
    566 if [[ ${ALX_CONFD_NETWORKING} = false ]]
    567 then
    568 #[ ! -d ${SETTINGSPATH} ] && install -d ${SETTINGSPATH}
    569 #echo "${NETCARD_DRIVER}" > ${SETTINGSPATH}/modules
    570
    571 # set an device alias for modprobe.conf and modules.conf
    572 [ ! -d /etc/modules.d ] && install -d /etc/modules.d
    573 [ ! -d /etc/modprobe.d ] && install -d /etc/modprobe.d
    574 echo "alias eth0 ${NETCARD_DRIVER}" > /etc/modules.d/net.eth0
    575 echo "alias eth0 ${NETCARD_DRIVER}" > /etc/modprobe.d/net.eth0
    576
    577 # regenerate modprobe.conf
    578 [ -x $(which modules-update) ] && modules-update || echo "cannot regen modprobe.conf"
    579 evaluate_retval
    580 fi
    581
    582 # set system state to 'already configured'
    583 touch /etc/alxconfig-ng/state/configured
    584
    585 # if only an recheck was forced than abort now
    586 [[ ${ALX_FORCED_RECHECK} = true ]] && return 0
    587
    588 # create a fresh fluxbox directory
    589 [ -d ${ALX_UNPRIV_HOME}/.fluxbox ] && rm -rf ${ALX_UNPRIV_HOME}/.fluxbox
    590 install -d ${ALX_UNPRIV_HOME}/.fluxbox
    591
    592 # now generate fluxbox config files
    593
    594 # fluxbox main config
    595 cat ${ALX_SKELETONS}/fluxbox/init \
    596 > ${ALX_UNPRIV_HOME}/.fluxbox/init
    597
    598 # fluxbox autostart
    599 cat ${ALX_SKELETONS}/fluxbox/apps \
    600 > ${ALX_UNPRIV_HOME}/.fluxbox/apps
    601
    602 # fluxbox menu header
    603 cat ${ALX_SKELETONS}/fluxbox/menu.header \
    604 > ${ALX_UNPRIV_HOME}/.fluxbox/menu
    605
    606 # now fix it with proper messages :P
    607 local ver="$(< /etc/mageversion)"
    608 sed -i "s:@CHANGEME@:alx-${ver} #${ALX_SERIAL}:g" \
    609 ${ALX_UNPRIV_HOME}/.fluxbox/menu
    610
    611 # add a newline (maybe there is no crlf in the header)
    612 echo >> ${ALX_UNPRIV_HOME}/.fluxbox/menu
    613
    614 # fluxbox menu footer
    615 cat ${ALX_SKELETONS}/fluxbox/menu.footer \
    616 >> ${ALX_UNPRIV_HOME}/.fluxbox/menu
    617
    618 # add a newline (maybe there is no crlf in the footer)
    619 echo >> ${ALX_UNPRIV_HOME}/.fluxbox/menu
    620
    621
    622 # setup some standart icons (sysinfo.lnk)
    623 # basic config
    624 cat ${ALX_SKELETONS}/xtdesktop/xtdeskrc > ${ALX_UNPRIV_HOME}/.xtdeskrc
    625
    626 # clean desktop icon location
    627 [ -d ${ALX_UNPRIV_HOME}/.xtdesktop ] && rm -rf ${ALX_UNPRIV_HOME}/.xtdesktop
    628 install -d ${ALX_UNPRIV_HOME}/.xtdesktop
    629
    630 # last but not least gen a icon with some sys informations
    631 local sysinfo
    632 local osversion
    633 local xres
    634 local yres
    635
    636 osversion="$(< /etc/mageversion)"
    637 sysinfo="Hostname: ${ALX_DEFAULT_HOSTNAME} Serial: #${ALX_SERIAL} OS: alx-${osversion} Kernel: $(uname -r)"
    638
    639 # at first boot we got always a resolution of 1024x768-16@60
    640 # middle of the screen
    641 # (no txt - length required, xtdesk manage that itself)
    642 xres="$((1024 / 2))"
    643 # default y pos (full yres -22 !)
    644 yres="$((768 - 22 ))"
    645
    646 generate_icon \
    647 --name "${sysinfo}" \
    648 --command "exit 0" \
    649 --icon "${ALX_SESSIONS_ICONS}/sysinfo.png" \
    650 --dest "${ALX_UNPRIV_HOME}/.xtdesktop/sysinfo.lnk" \
    651 --xres "${xres}" \
    652 --yres "${yres}" \
    653 --icon-width "1" \
    654 --icon-height "1"
    655
    656 # create a xinitrc
    657 echo "exec startfluxbox" > ${ALX_UNPRIV_HOME}/.xinitrc
    658
    659 # set correct permissions
    660 chown ${ALX_UNPRIV_USER}:${ALX_UNPRIV_GROUP} ${ALX_UNPRIV_HOME}
    661 chown ${ALX_UNPRIV_USER}:${ALX_UNPRIV_GROUP} ${ALX_UNPRIV_HOME}/.fluxbox
    662 chmod 0755 ${ALX_UNPRIV_HOME}/.fluxbox
    663 chmod 0755 ${ALX_UNPRIV_HOME}/.xtdesktop
    664 chmod 0644 ${ALX_UNPRIV_HOME}/.xtdeskrc
    665 chmod 0644 ${ALX_UNPRIV_HOME}/.xinitrc
    666 }
    667
    668 # start|stop
    669 preliminary_network()
    670 {
    671 local module
    672
    673 if [ -f /etc/alxconfig-ng/state/configured ]
    674 then
    675 # compat for old clients
    676 if [ -f ${SETTINGSPATH}/modules ]
    677 then
    678 # get module name
    679 module=$(cat ${SETTINGSPATH}/modules)
    680 modprobe ${module}
    681 fi
    682 else
    683 # vars used by hwdetect
    684 local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
    685 local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
    686
    687 # get setting from hwdetect
    688 source /etc/sysconfig/hwsetup/knoppix
    689 modprobe ${NETCARD_DRIVER}
    690 fi
    691
    692 case $1 in
    693 start)
    694 # keeping like always safe:
    695 # no network should be startet here,
    696 # so we can delete all pid files if one exists
    697 if ps -A|grep dhcpcd > /dev/null
    698 then
    699 echo -e ${COLMAGENTA}"Forcing network down"${COLDEFAULT}
    700 dhcpcd -k
    701 sleep 1
    702 else
    703 rm -f /var/run/dhcpcd-eth?.pid
    704 fi
    705 [[ ${ALX_CONFD_NETWORKING} = true ]] && [[ ${RUNLEVEL} != S ]] && \
    706 ${rc_base}/init.d/network stop
    707
    708 echo -e ${COLMAGENTA}"Starting preliminary networking ... "${COLDEFAULT}
    709
    710 # start network configured from /etc/conf.d
    711 if [[ ${ALX_CONFD_NETWORKING} = true ]]
    712 then
    713 ${rc_base}/init.d/network start
    714 else
    715 echo -e ${COLOREDSTAR}"Starting default dhcp based networking ... "${COLDEFAULT}
    716 # -t 10 timeout of 10 secs
    717 dhcpcd -t 10 &> /dev/null
    718 evaluate_retval
    719 fi
    720 ;;
    721
    722 stop)
    723 echo -e ${COLMAGENTA}"Stopping preliminary networking ... "${COLDEFAULT}
    724 if [[ ${ALX_CONFD_NETWORKING} = true ]]
    725 then
    726 ${rc_base}/init.d/network stop
    727 else
    728 echo -e ${COLOREDSTAR}"Stopping default dhcp based networking ... "${COLDEFAULT}
    729 ifconfig eth0 down
    730 fi
    731 if ps -A|grep dhcpcd > /dev/null
    732 then
    733 dhcpcd -z &> /dev/null
    734 sleep 1
    735 fi
    736 evaluate_retval
    737 ;;
    738
    739 *)
    740 echo "Usage: preliminary_network {start|stop}"
    741 ;;
    742 esac
    743 }
    744
    745 reset_system_settings()
    746 {
    747 # force load of de kbdkeys
    748 loadkeys -q de
    749 echo
    750 echo -en ${COLRED}
    751 echo -n "*** Warning: you are about to reset *all* local settings on this system!"
    752 echo -e ${COLDEFAULT}
    753 echo "*** Do you really want to continue ?"
    754 echo -n "*** Enter 'yes' to continue, anything else to abort: "
    755 read kbinsert
    756 if [[ ${kbinsert} = yes ]]
    757 then
    758 echo -en ${COLRED}
    759 echo -n "*** OK, you really want it ... killing all settings: "
    760 for i in 3 2 1 now
    761 do
    762 echo -n " ${i}"
    763 sleep 1
    764 done
    765 echo -e ${COLDEFAULT}
    766
    767 ## reset all settings:
    768 rm -rf ${SETTINGSPATH}/*
    769 rm -f /etc/alxconfig-ng/serial
    770 rm -rf /etc/alxconfig-ng/state
    771
    772 # clear all printers & net-shares
    773 :> /etc/cups/printers.conf
    774 :> /etc/samba/smb.conf
    775
    776 # remove inetd, cups & smb from init
    777 rc-config del inetd &> /dev/null
    778 rc-config del cups &> /dev/null
    779 rc-config del samba &> /dev/null
    780
    781 # remove all user settings
    782 [ -d ${ALX_UNPRIV_HOME} ] && rm -rf ${ALX_UNPRIV_HOME}
    783
    784 # remove all ica-sessions
    785 find ${ALX_ICA_SESSIONS} -type f -name '*.ica' | xargs rm
    786
    787 # remove all old nics and modules configs
    788 find /etc/conf.d -type f -name 'net.*' | xargs rm
    789 find /etc/modules.d -type f -name 'net.*' | xargs rm
    790
    791 # restore default networking
    792 cat ${ALX_SKELETONS}/net/net.eth0 > /etc/conf.d/net.eth0
    793
    794 echo "I am done now, press [Enter] to reboot system ..."
    795 else
    796 echo "Aborted, press [Enter] to reboot system ..."
    797 fi
    798 read
    799 reboot
    800 }
    801
    802 onboot_interface_list()
    803 {
    804 local file
    805 local devices
    806 local iface
    807
    808 # get list of all devices
    809 for file in $@
    810 do
    811 if [[ $(read_value ONBOOT ${file}) = yes ]]
    812 then
    813 iface="$(basename ${file} | sed s/net.//)"
    814 # exclude backup files
    815 case "${iface}" in
    816 *~) ;;
    817 *) devices="${devices} $(basename ${file} | sed s/net.//)" ;;
    818 esac
    819 fi
    820 done
    821
    822 echo "${devices}"
    823 }
    824
    825 # read values from net.* files
    826 read_value()
    827 {
    828 local var="$1"
    829 local file="$2"
    830 local value
    831
    832 # local all possible vars
    833 # global
    834 local ONBOOT
    835 local NETWORKING
    836
    837 # static
    838 local IP
    839 local NETMASK
    840 local BROADCAST
    841 local NETWORKING
    842 local FORCE_MAC_TO
    843
    844 # dhcp
    845 local DHCP_PROG
    846 local DHCP_START
    847 local DHCP_STOP
    848
    849 # default gw
    850 local GATEWAY
    851 local GATEWAY_IF
    852
    853 # wireless extensions
    854 local WIRELESS_AP
    855 local WIRELESS_AUTH_MODE
    856 local WIRELESS_BITRATE
    857 local WIRELESS_CHANNEL
    858 local WIRELESS_DEFAULT_KEY
    859 local WIRELESS_ESSID
    860 local WIRELESS_FREQUENCY
    861 local WIRELESS_KEY
    862 local WIRELESS_KEY_ASCII
    863 local WIRELESS_KEY_0
    864 local WIRELESS_KEY_1
    865 local WIRELESS_KEY_2
    866 local WIRELESS_KEY_3
    867 local WIRELESS_KEY_LENGTH
    868 local WIRELESS_MODE
    869 local WIRELESS_NICK
    870 local WIRELESS_NWID
    871 local WIRELESS_POWER
    872
    873 source ${file}
    874 eval value=\$$(echo ${var})
    875 echo "${value}"
    876 }
    877
    878 case $1 in
    879 start)
    880 # check for global overrides
    881 [ -f ${SETTINGSPATH}/confd-networking ] && ALX_CONFD_NETWORKING=true
    882 [ -f /hardware-auto-detection ] && ALX_FORCED_RECHECK=true
    883 read_cmdline hardware-auto-detection && ALX_FORCED_RECHECK=true
    884 read_cmdline alx-reset-settings && ALX_RESET_SETTINGS=true
    885
    886 # kill all settings if requested
    887 if [[ ${ALX_RESET_SETTINGS} = true ]]
    888 then
    889 reset_system_settings
    890 fi
    891
    892 # retrieve or validate current serial
    893 get_system_serial
    894 if [[ ${ALX_HW_DETECT} = true ]]
    895 then
    896 if [[ ${ALX_FORCED_RECHECK} = true ]]
    897 then
    898 update_settings_in_db
    899 else
    900 import_settings_to_db
    901 fi
    902 import_settings_local
    903
    904 # here we should also exchange the ssh keys
    905 # or the system cannot be rebooted after
    906 # the first start via the alx-webadmin
    907 config_ssh_auth
    908 fi
    909
    910 # now setup system configuration
    911 # alx_setup_or_whatever_it_will_be_called()
    912 [[ ${ALX_HW_DETECT} = false ]] && update_system_settings
    913
    914 # stop at last the preliminary networking (dhcp)
    915 preliminary_network stop
    916 ;;
    917
    918 stop)
    919 # unset_alx_connected #--> now in alxsetstate-rc6
    920 # ! important !: del systemstate
    921 [ -f /etc/alxconfig-ng/state/state ] && rm /etc/alxconfig-ng/state/state
    922 sleep 0.1
    923 ;;
    924 *)
    925 echo "Usage: $0 {start|stop} ..."
    926 ;;
    927 esac
    928

    Properties

    Name Value
    svn:executable *