Magellan Linux

  • Back to homepage
    • /[alx-svn]/alx-src/tags/alxconf-0_6_0-rc7/init.d/alxsettings

    Contents of /alx-src/tags/alxconf-0_6_0-rc7/init.d/alxsettings

    Parent Directory Parent Directory | Revision Log Revision Log

    Revision 2480 - (show annotations) (download)
    Mon Jun 27 15:21:21 2011 UTC (12 years, 10 months ago) by niro
    File size: 24038 byte(s) 
    -fixed typos
    1 #!/bin/bash
    2 # $Id$
    3 # <niro@magellan-linux.de>
    4
    5 #%rlevels: 7:s 0:k
    6 #%start: 41
    7 #%stop: 01
    8
    9 #deps
    10 #%needs:
    11 #%before:
    12 #%after:
    13
    14 # checks first if the client was already configured and if it has an valid serial
    15 # if not it runs the autoconfiguration script
    16 # these settings will be used for client setup
    17 #
    18 # if client was valid it first will check if his settings against the server
    19 # if no changes are at server side they will be kept, if yes the get updated.
    20 # the server settings has higher priority.
    21
    22 source /etc/conf.d/rc
    23 source $rc_functions
    24
    25 # mysql settings
    26 source /etc/alxconfig-ng/config.rc
    27
    28 # helper functions
    29 source /usr/lib/alxconfig-ng/functions/common
    30 source /usr/lib/alxconfig-ng/functions/mysqlfunctions
    31 source /usr/lib/alxconfig-ng/functions/serial_functions
    32 source /usr/lib/alxconfig-ng/functions/config_modules
    33 source /usr/lib/alxconfig-ng/functions/config_network
    34 source /usr/lib/alxconfig-ng/functions/config_printers
    35 source /usr/lib/alxconfig-ng/functions/config_sessions
    36 source /usr/lib/alxconfig-ng/functions/config_x11
    37 source /usr/lib/alxconfig-ng/functions/config_auth
    38 source /usr/lib/alxconfig-ng/functions/config_ssh_auth
    39 source /usr/lib/alxconfig-ng/functions/config_versions
    40
    41 # other needed vars
    42 ALX_HW_DETECT=false
    43 ALX_FORCED_RECHECK=false
    44 ALX_RESET_SETTINGS=false
    45 ALX_CONFD_NETWORKING=false
    46
    47 # unset vars which may kill us
    48 unset ALX_SERIAL ALX_STATE
    49
    50
    51 # setup needed directories
    52 [ ! -d /etc/alxconfig-ng/state ] && install -d /etc/alxconfig-ng/state
    53
    54 update_system_settings()
    55 {
    56 rc_mecho Checking system setup ...
    57
    58 # get the modules settings
    59 # ! is the first thing that must be configured !
    60 config_modules
    61
    62 # imports network settings from db
    63 config_networking
    64
    65 # imports x11 settings from db
    66 config_x11
    67
    68 # imports session settings from db
    69 config_sessions
    70
    71 # imports printer settings from db
    72 config_printing
    73
    74 # imports auth settings from db
    75 config_auth
    76
    77 # exchange ssh rsa keys
    78 HOME=/root config_ssh_auth
    79
    80 # import version info
    81 config_version
    82 }
    83
    84 get_system_serial()
    85 {
    86 local CUR_IP CUR_MAC CUR_MTIME ALX_IFACE
    87
    88 if [[ ${ALX_CONFD_NETWORKING} = true ]]
    89 then
    90 ALX_IFACE="$(< ${SETTINGSPATH}/confd-networking)"
    91 else
    92 ALX_IFACE="eth0"
    93 fi
    94
    95 # check if serial file exists
    96 if [ -f /etc/alxconfig-ng/serial ] && [[ ${ALX_FORCED_RECHECK} = false ]]
    97 then
    98 source /etc/alxconfig-ng/serial
    99
    100 # start preliminary networking (dhcp)
    101 preliminary_network start
    102
    103 # check if mysql server is reachable
    104 # if not abort this script
    105 if ! reach_mysql_server
    106 then
    107 preliminary_network stop
    108 exit 1
    109 fi
    110
    111 CUR_IP=$(ifconfig ${ALX_IFACE} | sed -n '/addr:/s/ [^r]*..//gp')
    112 CUR_MAC=$(ifconfig ${ALX_IFACE} | grep HWaddr | cut -d ' ' -f11)
    113 CUR_MTIME=$(date +%s)
    114
    115 rc_print "Trying to validate my serial ..."
    116
    117 # nice serial output
    118 $CURS_UP
    119 $SET_WCOL
    120 echo "[ SN: ${ALX_SERIAL} ]"
    121
    122 if validate_serial "${ALX_SERIAL}" "${ALX_REG_DATE}" "${CUR_MAC}"
    123 then
    124 ALX_STATE="ok"
    125 else
    126 # abort on non valid serial
    127 ALX_STATE="invalid serial"
    128 echo "ALX_STATE=\"${ALX_STATE}\"" > /etc/alxconfig-ng/state/state
    129 show_invalid_serial_msg
    130 exit 1
    131 fi
    132
    133 else
    134 # run hardware detection
    135 echo
    136 if [[ ${ALX_FORCED_RECHECK} = true ]]
    137 then
    138 rc_mecho "Hardware autodetection forced by system-administrator"
    139 # always disable CONFD_NETWORKING here
    140 export ALX_CONFD_NETWORKING="false"
    141 else
    142 rc_mecho "Preparing system for first boot"
    143 fi
    144 ALX_HW_DETECT=true
    145 hwsetup
    146
    147 # set hostname to alx_default_hostname
    148 # use old hostname if this is a forced re-check
    149 [[ ${ALX_FORCED_RECHECK} = true ]] && ALX_DEFAULT_HOSTNAME="$(< /etc/hostname)"
    150 [ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx
    151 HOSTNAME="${ALX_DEFAULT_HOSTNAME}"
    152
    153 # update the hostname on the system for sure
    154 echo "${HOSTNAME}" > /etc/hostname
    155
    156 # start preliminary networking (dhcp)
    157 preliminary_network start
    158
    159 # check if mysql server is reachable
    160 # if not abort this script
    161 if ! reach_mysql_server
    162 then
    163 preliminary_network stop
    164 exit 1
    165 fi
    166
    167
    168 CUR_IP=$(/sbin/ifconfig eth0 | sed -n '/addr:/s/ [^r]*..//gp')
    169 CUR_MAC=$(/sbin/ifconfig eth0 | grep HWaddr | cut -d ' ' -f11)
    170 CUR_MTIME=$(date +%s)
    171
    172 # abort now if this is a forced re-check
    173 if [[ ${ALX_FORCED_RECHECK} = true ]]
    174 then
    175 # but first check the serial
    176 source /etc/alxconfig-ng/serial
    177
    178 rc_print "Trying to validate my serial ..."
    179
    180 # nice serial output
    181 $CURS_UP
    182 $SET_WCOL
    183 echo "[ SN: ${ALX_SERIAL} ]"
    184
    185 if validate_serial "${ALX_SERIAL}" "${ALX_REG_DATE}" "${CUR_MAC}"
    186 then
    187 ALX_STATE="ok"
    188 else
    189 # abort on non valid serial
    190 ALX_STATE="invalid serial"
    191 echo "ALX_STATE=${ALX_STATE}" > /etc/alxconfig-ng/state/state
    192 show_invalid_serial_msg
    193 exit 1
    194 fi
    195
    196 # write current state to temp file
    197 echo "ALX_STATE=\"${ALX_STATE}\"" > /etc/alxconfig-ng/state/state
    198 [ -f /hardware-auto-detection ] && rm /hardware-auto-detection
    199
    200 # now export ALX_FORCED_RECHECK=true
    201 # that the setting will be updated not inserted !
    202 export ALX_FORCED_RECHECK=true
    203 return 0
    204 fi
    205
    206 rc_print "Trying to get new serial ..."
    207
    208 # request a new serial; one command now (cause must be done in the same session)
    209 ALX_SERIAL=$(mysqldo "insert into client_serials (mtime, mac) values('${CUR_MTIME}','${CUR_MAC}');
    210 select last_insert_id();")
    211
    212 if [[ ${ALX_SERIAL} != NULL ]]
    213 then
    214 # nice serial output
    215 $CURS_UP
    216 $SET_WCOL
    217 echo "[ SN: ${ALX_SERIAL} ]"
    218
    219 # set ALX_STATE to ok so everybody knows that everything was ok
    220 ALX_STATE=ok
    221
    222 echo "ALX_SERIAL=\"${ALX_SERIAL}\"" > /etc/alxconfig-ng/serial
    223 echo "ALX_REG_DATE=\"${CUR_MTIME}\"" >> /etc/alxconfig-ng/serial
    224
    225 evaluate_retval
    226 else
    227 # print false (works only if this is the first statement here)
    228 evaluate_retval
    229
    230 # set ALX_STATE to error so everybody sees there was an error
    231 ALX_STATE=error
    232
    233 # show an error that no new serial was found
    234 # nice serial output
    235 $CURS_UP
    236 $SET_WCOL
    237 echo -e "[ SN: ${COLRED}None, 0${COLDEFAULT} ]"
    238 fi
    239 fi
    240
    241 # write current state to temp file
    242 echo "ALX_STATE=\"${ALX_STATE}\"" > /etc/alxconfig-ng/state/state
    243 echo "ALX_IFACE=\"${ALX_IFACE}\"" >> /etc/alxconfig-ng/state/state
    244 }
    245
    246
    247 check_is_configured()
    248 {
    249 if [ -f /etc/alxconfig-ng/state/configured ]
    250 then
    251 export ALX_CONFIGURED=true
    252 else
    253 export ALX_CONFIGURED=false
    254 fi
    255 }
    256
    257
    258 # imports current settings to the database resolved by the hardware detection
    259 import_settings_to_db()
    260 {
    261 # note: networking is always 'dhcp' if hw was autodetected
    262 # note: default_domain/hostname is set in config.rc
    263
    264 # to be safe, we do some sanity checks
    265 [ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain
    266 [ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx
    267
    268 # vars used by hwsetup
    269 local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
    270 local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
    271 local MOUSETYPE XMOUSETYPE FULLNAME DEVICE
    272
    273 # get setting from hwsetup
    274 source /etc/conf.d/hwsetup/knoppix
    275 source /etc/conf.d/hwsetup/mouse
    276
    277 echo
    278 rc_mecho "Importing detected settings to database"
    279
    280 # network
    281 rc_mecho " Network settings ..."
    282 if [[ ${ALX_CONFD_NETWORKING} = true ]]
    283 then
    284 # get settings
    285 for iface in $(onboot_interface_list ${network_settings}/net.*)
    286 do
    287 [[ $(< ${SETTINGSPATH}/confd-networking) != ${iface} ]] && continue
    288 rc_echo "WARNING: only importing settings for interface [ ${iface} ] !"
    289 source ${network_settings}/net.${iface} || echo "Error: could not read '${network_settings}/net.${iface}'"
    290 NETCARD_DRIVER="$(cat /etc/modprobe.d/net.${iface}.conf | cut -d' ' -f3)"
    291
    292 mysqldo "insert into cfg_network(
    293 hostname,
    294 serial,
    295 module,
    296 domain,
    297 networking,
    298 netmask,
    299 dns,
    300 gateway,
    301 broadcast,
    302 ip,
    303 forcemacto,
    304 wireless_bitrate,
    305 wireless_channel,
    306 wireless_essid,
    307 wireless_frequency,
    308 wireless_mode,
    309 wireless_nick,
    310 wireless_auth_mode,
    311 wireless_key_length,
    312 wireless_key,
    313 wireless_key_ascii
    314 )
    315 values(
    316 '${ALX_DEFAULT_HOSTNAME}',
    317 '${ALX_SERIAL}',
    318 '${NETCARD_DRIVER}',
    319 '${ALX_DEFAULT_DOMAIN}',
    320 '${NETWORKING}',
    321 '${NETMASK}',
    322 '${NAMESERVER}',
    323 '${GATEWAY}',
    324 '${BROADCAST}',
    325 '${IP}',
    326 '${FORCE_MAC_TO}',
    327 '${WIRELESS_BITRATE}',
    328 '${WIRELESS_CHANNEL}',
    329 '${WIRELESS_ESSID}',
    330 '${WIRELESS_FREQUENCY}',
    331 '${WIRELESS_MODE}',
    332 '${WIRELESS_NICK}',
    333 '${WIRELESS_AUTH_MODE}',
    334 '${WIRELESS_KEY_LENGTH}',
    335 '${WIRELESS_KEY}',
    336 '${WIRELESS_KEY_ASCII}'
    337 );"
    338
    339 # only insert the *FIRST* iface
    340 break
    341 done
    342 else
    343 mysqldo "insert into cfg_network(
    344 hostname,
    345 serial,
    346 module,
    347 domain,
    348 networking
    349 )
    350 values(
    351 '${ALX_DEFAULT_HOSTNAME}',
    352 '${ALX_SERIAL}',
    353 '${NETCARD_DRIVER}',
    354 '${ALX_DEFAULT_DOMAIN}',
    355 'dhcp'
    356 );"
    357 fi
    358 evaluate_retval
    359
    360 # xserver
    361 rc_mecho " Graphic settings ..."
    362 # xserver general
    363 ( mysqldo "insert into cfg_graphic(
    364 serial,
    365 module,
    366 resolution,
    367 depth,
    368 refresh_rate
    369 )
    370 values(
    371 '${ALX_SERIAL}',
    372 '${XMODULE}',
    373 '1024x768',
    374 '16',
    375 '60'
    376 );"; )
    377 evaluate_retval
    378
    379 # input
    380 rc_mecho " Input settings ..."
    381 mysqldo "insert into cfg_input(serial,mouse) values('${ALX_SERIAL}','${XMOUSETYPE}');"
    382 evaluate_retval
    383
    384 # auth
    385 rc_mecho " Authentification settings ..."
    386 mysqldo "insert into client_auth(
    387 serial,
    388 username,
    389 shell,
    390 vnc,
    391 samba,
    392 station
    393 )
    394 values(
    395 '${ALX_SERIAL}',
    396 '${ALX_UNPRIV_USER}',
    397 '',
    398 '',
    399 '',
    400 ''
    401 );"
    402 evaluate_retval
    403
    404 # exchange ssh rsa keys - the first boot needs this !
    405 # or no reboot will work via the webadmin
    406 rc_mecho " SSH authentification settings ..."
    407 HOME=/root config_ssh_auth
    408 evaluate_retval
    409
    410 # autostart
    411 rc_mecho " Autostart settings ..."
    412 mysqldo "insert into cfg_autostart(serial,session) values('${ALX_SERIAL}','');"
    413
    414 # screensaver
    415 rc_mecho " Screensaver settings ..."
    416 mysqldo "insert into cfg_screensaver(serial,screensaver) values('${ALX_SERIAL}','')"
    417
    418 # version info
    419 rc_mecho " OS version info ..."
    420 local alx_os
    421 local alx_utils
    422 alx_os="$(< /etc/mageversion)"
    423 alx_utils="$(magequery -n alxconfig-ng-alx | sed 's:.*\[\ \(.*\)\ \].*:\1:')"
    424 alx_utils="${alx_utils/alxconfig-ng-alx-}"
    425 mysqldo "insert into client_version(serial,os,utils) values('${ALX_SERIAL}','${alx_os}','${alx_utils}')"
    426
    427 evaluate_retval
    428 }
    429
    430 # imports current settings to the database resolved by the hardware detection
    431 update_settings_in_db()
    432 {
    433 # note: networking is always 'dhcp' if hw was autodetected
    434 # note: default_domain/hostname is set in config.rc or exported
    435 # note: we updating only hardware settings here !
    436
    437 # to be safe, we do some sanity checks
    438 [ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain
    439 [ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx
    440
    441 # vars used by hwsetup
    442 local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
    443 local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
    444 local MOUSETYPE XMOUSETYPE FULLNAME DEVICE
    445
    446 # get setting from hwsetup
    447 source /etc/conf.d/hwsetup/knoppix
    448 source /etc/conf.d/hwsetup/mouse
    449
    450 echo
    451 rc_mecho "Updating detected settings in database"
    452
    453 # network
    454 rc_mecho " Network settings ..."
    455 if [[ ${ALX_CONFD_NETWORKING} = true ]]
    456 then
    457 # get settings
    458 #source ${rc_base}/init.d/network &> /dev/null
    459 for iface in $(onboot_interface_list ${network_settings}/net.*)
    460 do
    461 [[ $(< ${SETTINGSPATH}/confd-networking) != ${iface} ]] && continue
    462 rc_echo "WARNING: only importing settings for interface [ ${iface} ] !"
    463 source ${network_settings}/net.${iface} || exit 1
    464 NETCARD_DRIVER="$(cat /etc/modprobe.d/net.${iface}.conf | cut -d' ' -f3)"
    465
    466 mysqldo "update cfg_network set
    467 hostname='${ALX_DEFAULT_HOSTNAME}',
    468 module='${NETCARD_DRIVER}',
    469 domain='${ALX_DEFAULT_DOMAIN}',
    470 networking='${NETWORKING}',
    471 netmask='${NETMASK}',
    472 dns='${NAMESERVER}',
    473 gateway='${GATEWAY}',
    474 broadcast='${BROADCAST}',
    475 ip='${IP}',
    476 forcemacto='${FORCE_MAC_TO}',
    477 wireless_bitrate='${WIRELESS_BITRATE}',
    478 wireless_channel='${WIRELESS_CHANNEL}',
    479 wireless_essid='${WIRELESS_ESSID}',
    480 wireless_frequency='${WIRELESS_FREQUENCY}',
    481 wireless_mode='${WIRELESS_MODE}',
    482 wireless_nick='${WIRELESS_NICK}',
    483 wireless_auth_mode='${WIRELESS_AUTH_MODE}',
    484 wireless_key_length='${WIRELESS_KEY_LENGTH}',
    485 wireless_key='${WIRELESS_KEY}',
    486 wireless_key_ascii='${WIRELESS_KEY_ASCII}'
    487 where serial=${ALX_SERIAL};"
    488
    489 # only insert the *FIRST* iface
    490 break
    491 done
    492 else
    493 mysqldo "update cfg_network set
    494 hostname='${ALX_DEFAULT_HOSTNAME}',
    495 module='${NETCARD_DRIVER}',
    496 domain='${ALX_DEFAULT_DOMAIN}',
    497 networking='dhcp'
    498 where serial=${ALX_SERIAL};"
    499 fi
    500 evaluate_retval
    501
    502 # xserver
    503 rc_mecho " Graphic settings ..."
    504 # xserver general
    505 mysqldo "update cfg_graphic set
    506 module='${XMODULE}',
    507 resolution='1024x768',
    508 depth='16',
    509 refresh_rate='60'
    510 where serial=${ALX_SERIAL};"
    511 evaluate_retval
    512
    513 # input
    514 rc_mecho " Input settings ..."
    515 mysqldo "update cfg_input set mouse='${XMOUSETYPE}' where serial=${ALX_SERIAL};"
    516 evaluate_retval
    517
    518 # version info
    519 rc_mecho " OS version info ..."
    520 local alx_os
    521 local alx_utils
    522 alx_os="$(< /etc/mageversion)"
    523 alx_utils="$(magequery -n alxconfig-ng-alx | sed 's:.*\[\ \(.*\)\ \].*:\1:')"
    524 alx_utils="${alx_utils/alxconfig-ng-alx-}"
    525 mysqldo "update client_version set os='${alx_os}', utils='${alx_utils}' where serial=${ALX_SERIAL};"
    526 }
    527
    528 # imports current settings to the local system resolved by the hardware detection
    529 # we only need the network settings
    530 import_settings_local()
    531 {
    532 # note: networking is always 'dhcp' if hw was autodetected
    533 # note: default_domain/hostname is set in config.rc
    534
    535 # to be safe, we do some sanity checks
    536 [ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain
    537 [ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx
    538
    539 # vars used by hwsetup
    540 local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
    541 local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
    542 local MOUSETYPE XMOUSETYPE FULLNAME DEVICE
    543
    544 # get setting from hwsetup
    545 source /etc/conf.d/hwsetup/knoppix
    546
    547 echo
    548 rc_mecho "Importing detected settings to local system"
    549
    550 if [[ ${ALX_CONFD_NETWORKING} = false ]]
    551 then
    552 # set an device alias for modprobe.conf
    553 [ ! -d /etc/modprobe.d ] && install -d /etc/modprobe.d
    554 echo "alias eth0 ${NETCARD_DRIVER}" > /etc/modprobe.d/net.eth0.conf
    555
    556 # regenerate modprobe.conf
    557 [ -x $(which modules-update) ] && modules-update || rc_echo "modules-update not found!"
    558 evaluate_retval
    559 fi
    560
    561 # set system state to 'already configured'
    562 touch /etc/alxconfig-ng/state/configured
    563
    564 # install slim desktopmanager configuration
    565 config_display_manager
    566
    567 # if only an recheck was forced than abort now
    568 [[ ${ALX_FORCED_RECHECK} = true ]] && return 0
    569
    570 # create a fresh fluxbox directory
    571 [ -d ${ALX_UNPRIV_HOME}/.fluxbox ] && rm -rf ${ALX_UNPRIV_HOME}/.fluxbox
    572 install -d ${ALX_UNPRIV_HOME}/.fluxbox
    573
    574 # now generate fluxbox config files
    575
    576 # fluxbox main config
    577 local fbinit
    578 if [ -f ${ALX_SKELETONS}/fluxbox/init ]
    579 then
    580 fbinit="${ALX_SKELETONS}/fluxbox/init"
    581 else
    582 fbinit="/usr/share/fluxbox/init"
    583 fi
    584 cat ${fbinit} > ${ALX_UNPRIV_HOME}/.fluxbox/init
    585
    586 # fluxbox autostart
    587 CONFIG="${ALX_UNPRIV_HOME}/.fluxbox/apps"
    588 # do not show decorations on messages generated with xmessage
    589 if [ -x /usr/bin/xmessage ]
    590 then
    591 addconfig '[app] (xmessage)'
    592 addconfig ' [Deco] {NONE}'
    593 addconfig '[end]'
    594 fi
    595 # add icon utility
    596 [ -x /usr/bin/idesk ] && addconfig '[startup] {nohup idesk > /dev/null &}'
    597 # add numlock utility
    598 [ -x /usr/bin/numlockx ] && addconfig '[startup] {nohup numlockx on &}'
    599
    600 # fluxbox hotkeys
    601 local fbkeys
    602 if [ -f ${ALX_SKELETONS}/fluxbox/keys ]
    603 then
    604 fbkeys="${ALX_SKELETONS}/fluxbox/keys"
    605 else
    606 fbkeys="/usr/share/fluxbox/keys"
    607 fi
    608 cat ${fbkeys} > ${ALX_UNPRIV_HOME}/.fluxbox/keys
    609
    610 # fluxbox menu header
    611 cat ${ALX_SKELETONS}/fluxbox/menu.header > ${ALX_UNPRIV_HOME}/.fluxbox/menu
    612
    613 # now fix it with proper messages :P
    614 local ver="$(< /etc/mageversion)"
    615 sed -i "s:@CHANGEME@:alx-${ver} #${ALX_SERIAL}:g" ${ALX_UNPRIV_HOME}/.fluxbox/menu
    616
    617 # add a newline (maybe there is no crlf in the header)
    618 echo >> ${ALX_UNPRIV_HOME}/.fluxbox/menu
    619
    620 # fluxbox menu footer
    621 cat ${ALX_SKELETONS}/fluxbox/menu.footer >> ${ALX_UNPRIV_HOME}/.fluxbox/menu
    622
    623 # add a newline (maybe there is no crlf in the footer)
    624 echo >> ${ALX_UNPRIV_HOME}/.fluxbox/menu
    625
    626 # setup some standart icons (sysinfo.lnk)
    627 # clean desktop icon location
    628 [ -d ${ALX_UNPRIV_HOME}/.idesktop ] && rm -rf ${ALX_UNPRIV_HOME}/.idesktop
    629 install -d ${ALX_UNPRIV_HOME}/.idesktop
    630
    631 # add shutdown, reboot icons
    632 local name
    633 # default settings
    634 declare -i x=30
    635 declare -i y=30
    636 for i in shutdown reboot
    637 do
    638 case ${i} in
    639 shutdown) name="Herunterfahren" ;;
    640 reboot) name="Neustarten" ;;
    641 esac
    642
    643 generate_icon \
    644 --name "${name}" \
    645 --command "/usr/lib/alxconfig-ng/bin/user_${i}.sh" \
    646 --icon "${ALX_SESSIONS_ICONS}/${i}.png" \
    647 --dest "${dest}/${i}.lnk" \
    648 --xres "${x}" \
    649 --yres "${y}"
    650
    651 y=$((${y} + 80))
    652 done
    653
    654 # last but not least gen a icon with some sys informations
    655 local sysinfo
    656 local osversion
    657 local xres
    658 local yres
    659
    660 osversion="$(< /etc/mageversion)"
    661 sysinfo="Hostname: ${ALX_DEFAULT_HOSTNAME} Serial: #${ALX_SERIAL} OS: alx-${osversion} Kernel: $(uname -r)"
    662
    663 # at first boot we got always a resolution of 1024x768-16@60
    664 # middle of the screen
    665 # (no txt - length required, xtdesk manage that itself)
    666 xres="$((1024 / 2))"
    667 # default y pos (full yres -22 !)
    668 yres="$((768 - 22 ))"
    669
    670 generate_icon \
    671 --name "${sysinfo}" \
    672 --command "exit 0" \
    673 --icon "${ALX_SESSIONS_ICONS}/sysinfo.png" \
    674 --dest "${ALX_UNPRIV_HOME}/.idesktop/sysinfo.lnk" \
    675 --xres "${xres}" \
    676 --yres "${yres}" \
    677 --icon-width "1" \
    678 --icon-height "1"
    679
    680 # set correct permissions
    681 chown ${ALX_UNPRIV_USER}:${ALX_UNPRIV_GROUP} ${ALX_UNPRIV_HOME}
    682 chown ${ALX_UNPRIV_USER}:${ALX_UNPRIV_GROUP} ${ALX_UNPRIV_HOME}/.fluxbox
    683 chmod 0755 ${ALX_UNPRIV_HOME}/.fluxbox
    684 chmod 0755 ${ALX_UNPRIV_HOME}/.idesktop
    685 if [ -f ${ALX_UNPRIV_HOME}/.ideskrc ]
    686 then
    687 chmod 0644 ${ALX_UNPRIV_HOME}/.ideskrc
    688 fi
    689 }
    690
    691 # start|stop
    692 preliminary_network()
    693 {
    694 local module
    695
    696 if [ -f /etc/alxconfig-ng/state/configured ]
    697 then
    698 # compat for old clients
    699 if [ -f ${SETTINGSPATH}/modules ]
    700 then
    701 # get module name
    702 module=$(cat ${SETTINGSPATH}/modules)
    703 modprobe ${module}
    704 fi
    705
    706 else
    707 # vars used by hwsetup
    708 local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
    709 local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
    710
    711 # get setting from hwsetup
    712 source /etc/conf.d/hwsetup/knoppix
    713 modprobe ${NETCARD_DRIVER}
    714 fi
    715
    716 case $1 in
    717 start)
    718 # keeping like always safe:
    719 # no network should be startet here,
    720 # so we can delete all pid files if one exists
    721 if [[ ! -z $(pidof $(basename ${ALX_DHCP_PROG})) ]]
    722 then
    723 rc_mecho "Forcing network down"
    724 killall $(basename ${ALX_DHCP_PROG}) &> /dev/null
    725 sleep 1
    726 fi
    727 [[ ${ALX_CONFD_NETWORKING} = true ]] && ${rc_base}/init.d/network stop
    728
    729 rc_mecho "Starting preliminary networking ... "
    730
    731 # start network configured from /etc/conf.d
    732 if [[ ${ALX_CONFD_NETWORKING} = true ]]
    733 then
    734 ${rc_base}/init.d/network start
    735 else
    736 rc_print "Starting default dhcp based networking ... "
    737 ${ALX_DHCP_PROG} ${ALX_DHCP_START} &> /dev/null
    738 evaluate_retval
    739 fi
    740 ;;
    741
    742 stop)
    743 rc_mecho "Stopping preliminary networking ... "
    744 if [[ ${ALX_CONFD_NETWORKING} = true ]]
    745 then
    746 ${rc_base}/init.d/network stop
    747 else
    748 rc_print "Stopping default dhcp based networking ... "
    749 ifconfig ${ALX_IFACE} down
    750 fi
    751 if [[ ! -z $(pidof $(basename ${ALX_DHCP_PROG})) ]]
    752 then
    753 killall $(basename ${ALX_DHCP_PROG}) &> /dev/null
    754 sleep 1
    755 fi
    756 evaluate_retval
    757 ;;
    758
    759 *)
    760 echo "Usage: preliminary_network {start|stop}"
    761 ;;
    762 esac
    763 }
    764
    765 reset_system_settings()
    766 {
    767 # force load of de kbdkeys
    768 loadkeys -q de
    769 rc_echo
    770 rc_echo -en ${COLRED}
    771 rc_echo -n "*** Warning: you are about to reset *all* local settings on this system!"
    772 rc_echo -e ${COLDEFAULT}
    773 rc_echo "*** Do you really want to continue ?"
    774 rc_echo -n "*** Enter 'yes' to continue, anything else to abort: "
    775 read kbinsert
    776 if [[ ${kbinsert} = yes ]]
    777 then
    778 rc_echo -en ${COLRED}
    779 rc_echo -n "*** OK, you really want it ... killing all settings: "
    780 for i in 3 2 1 now
    781 do
    782 rc_echo -n " ${i}"
    783 sleep 1
    784 done
    785 rc_echo -e ${COLDEFAULT}
    786
    787 ## reset all settings:
    788 rm -rf ${SETTINGSPATH}/*
    789 rm -f /etc/alxconfig-ng/serial
    790 rm -rf /etc/alxconfig-ng/state
    791
    792 # clear all printers & net-shares
    793 :> /etc/printcap
    794
    795 # remove lprng
    796 rc-config del lprng &> /dev/null
    797
    798 # remove all user settings
    799 [ -d ${ALX_UNPRIV_HOME} ] && rm -rf ${ALX_UNPRIV_HOME}
    800
    801 # remove all ica-sessions
    802 find ${ALX_ICA_SESSIONS} -type f -name '*.ica' | xargs rm
    803
    804 # remove all old nics and modules configs
    805 find /etc/conf.d -type f -name 'net.*' | xargs rm
    806 find /etc/modprobe.d -type f -name 'net.*' | xargs rm
    807
    808 # restore default networking
    809 cat ${ALX_SKELETONS}/net/net.eth0 > /etc/conf.d/net.eth0
    810
    811 rc_echo "I am done now, press [Enter] to reboot system ..."
    812 else
    813 rc_echo "Aborted, press [Enter] to reboot system ..."
    814 fi
    815 read
    816 reboot
    817 }
    818
    819 onboot_interface_list()
    820 {
    821 local file
    822 local devices
    823 local iface
    824
    825 # get list of all devices
    826 for file in $@
    827 do
    828 if [[ $(read_value ONBOOT ${file}) = yes ]]
    829 then
    830 iface="$(basename ${file} | sed s/net.//)"
    831 # exclude backup files
    832 case "${iface}" in
    833 *~) ;;
    834 *) devices="${devices} $(basename ${file} | sed s/net.//)" ;;
    835 esac
    836 fi
    837 done
    838
    839 echo "${devices}"
    840 }
    841
    842 # read values from net.* files
    843 read_value()
    844 {
    845 local var="$1"
    846 local file="$2"
    847 local value
    848
    849 # local all possible vars
    850 # global
    851 local ONBOOT
    852 local NETWORKING
    853
    854 # static
    855 local IP
    856 local NETMASK
    857 local BROADCAST
    858 local NETWORKING
    859 local FORCE_MAC_TO
    860
    861 # dhcp
    862 local DHCP_PROG
    863 local DHCP_START
    864 local DHCP_STOP
    865
    866 # default gw
    867 local GATEWAY
    868 local GATEWAY_IF
    869
    870 # wireless extensions
    871 local WIRELESS_AP
    872 local WIRELESS_AUTH_MODE
    873 local WIRELESS_BITRATE
    874 local WIRELESS_CHANNEL
    875 local WIRELESS_DEFAULT_KEY
    876 local WIRELESS_ESSID
    877 local WIRELESS_FREQUENCY
    878 local WIRELESS_KEY
    879 local WIRELESS_KEY_ASCII
    880 local WIRELESS_KEY_0
    881 local WIRELESS_KEY_1
    882 local WIRELESS_KEY_2
    883 local WIRELESS_KEY_3
    884 local WIRELESS_KEY_LENGTH
    885 local WIRELESS_MODE
    886 local WIRELESS_NICK
    887 local WIRELESS_NWID
    888 local WIRELESS_POWER
    889
    890 source ${file}
    891 eval value=\$$(echo ${var})
    892 echo "${value}"
    893 }
    894
    895 case $1 in
    896 start)
    897 # check for global overrides
    898 [ -f ${SETTINGSPATH}/confd-networking ] && ALX_CONFD_NETWORKING=true
    899 [ -f /hardware-auto-detection ] && ALX_FORCED_RECHECK=true
    900 read_cmdline hardware-auto-detection && ALX_FORCED_RECHECK=true
    901 read_cmdline alx-reset-settings && ALX_RESET_SETTINGS=true
    902
    903 # kill all settings if requested
    904 if [[ ${ALX_RESET_SETTINGS} = true ]]
    905 then
    906 reset_system_settings
    907 fi
    908
    909 # retrieve or validate current serial
    910 get_system_serial
    911 if [[ ${ALX_HW_DETECT} = true ]]
    912 then
    913 if [[ ${ALX_FORCED_RECHECK} = true ]]
    914 then
    915 update_settings_in_db
    916 else
    917 import_settings_to_db
    918 fi
    919 import_settings_local
    920
    921 # here we should also exchange the ssh keys
    922 # or the system cannot be rebooted after
    923 # the first start via the alx-webadmin
    924 config_ssh_auth
    925 fi
    926
    927 # now setup system configuration
    928 # alx_setup_or_whatever_it_will_be_called()
    929 [[ ${ALX_HW_DETECT} = false ]] && update_system_settings
    930
    931 # stop at last the preliminary networking (dhcp)
    932 preliminary_network stop
    933 ;;
    934
    935 stop)
    936 # unset_alx_connected #--> now in alxsetstate-rc6
    937 # ! important !: del systemstate
    938 [ -f /etc/alxconfig-ng/state/state ] && rm /etc/alxconfig-ng/state/state
    939 sleep 0.1
    940 ;;
    941
    942 *)
    943 echo "Usage: $0 {start|stop} ..."
    944 ;;
    945 esac

    Properties

    Name Value
    svn:executable *