1 |
#!/bin/bash |
#!/bin/bash |
2 |
|
# $Id$ |
3 |
# <niro@magellan-linux.de> |
# <niro@magellan-linux.de> |
4 |
|
|
5 |
#%rlevels: 7:s 0:k 6:k |
#%rlevels: 7:s 0:k |
6 |
#%start: 41 |
#%start: 41 |
7 |
#%stop: 01 |
#%stop: 01 |
8 |
|
|
11 |
#%before: |
#%before: |
12 |
#%after: |
#%after: |
13 |
|
|
|
# $Header: /home/cvsd/alx-cvs/alx-src/alxconfig-ng/init.d/alxsettings,v 1.21 2005-09-01 18:30:28 niro Exp $ |
|
|
|
|
14 |
# checks first if the client was already configured and if it has an valid serial |
# checks first if the client was already configured and if it has an valid serial |
15 |
# if not it runs the autoconfiguration script |
# if not it runs the autoconfiguration script |
16 |
# these settings will be used for client setup |
# these settings will be used for client setup |
19 |
# if no changes are at server side they will be kept, if yes the get updated. |
# if no changes are at server side they will be kept, if yes the get updated. |
20 |
# the server settings has higher priority. |
# the server settings has higher priority. |
21 |
|
|
22 |
source /etc/sysconfig/rc |
source /etc/conf.d/rc |
23 |
source $rc_functions |
source $rc_functions |
24 |
|
|
25 |
# mysql settings |
# mysql settings |
26 |
source /etc/alxconfig-ng/config.rc |
source /etc/alxconfig-ng/config.rc |
27 |
|
|
28 |
# helper functions |
# helper functions |
29 |
|
source /usr/lib/alxconfig-ng/functions/common |
30 |
source /usr/lib/alxconfig-ng/functions/mysqlfunctions |
source /usr/lib/alxconfig-ng/functions/mysqlfunctions |
31 |
source /usr/lib/alxconfig-ng/functions/serial_functions |
source /usr/lib/alxconfig-ng/functions/serial_functions |
32 |
source /usr/lib/alxconfig-ng/functions/config_modules |
source /usr/lib/alxconfig-ng/functions/config_modules |
36 |
source /usr/lib/alxconfig-ng/functions/config_x11 |
source /usr/lib/alxconfig-ng/functions/config_x11 |
37 |
source /usr/lib/alxconfig-ng/functions/config_auth |
source /usr/lib/alxconfig-ng/functions/config_auth |
38 |
source /usr/lib/alxconfig-ng/functions/config_ssh_auth |
source /usr/lib/alxconfig-ng/functions/config_ssh_auth |
39 |
|
source /usr/lib/alxconfig-ng/functions/config_versions |
|
# check if mysql is available |
|
|
[ -x /usr/bin/mysql ] && MYSQL_ALX=true |
|
40 |
|
|
41 |
# other needed vars |
# other needed vars |
42 |
ALX_HW_DETECT=false |
ALX_HW_DETECT=false |
43 |
ALX_FORCED_RECHECK=false |
ALX_FORCED_RECHECK=false |
44 |
|
ALX_RESET_SETTINGS=false |
45 |
|
ALX_CONFD_NETWORKING=false |
46 |
|
|
47 |
# unset vars which may kill us |
# unset vars which may kill us |
48 |
unset ALX_SERIAL ALX_STATE |
unset ALX_SERIAL ALX_STATE |
51 |
# setup needed directories |
# setup needed directories |
52 |
[ ! -d /etc/alxconfig-ng/state ] && install -d /etc/alxconfig-ng/state |
[ ! -d /etc/alxconfig-ng/state ] && install -d /etc/alxconfig-ng/state |
53 |
|
|
54 |
|
update_system_settings() |
55 |
update_system_settings(){ |
{ |
56 |
echo -e ${COLMAGENTA}"Checking system setup ..."${COLDEFAULT} |
rc_mecho Checking system setup ... |
57 |
|
|
58 |
# get the modules settings |
# get the modules settings |
59 |
# ! is the first thing that must be configured ! |
# ! is the first thing that must be configured ! |
76 |
|
|
77 |
# exchange ssh rsa keys |
# exchange ssh rsa keys |
78 |
HOME=/root config_ssh_auth |
HOME=/root config_ssh_auth |
79 |
|
|
80 |
|
# import version info |
81 |
|
config_version |
82 |
} |
} |
83 |
|
|
84 |
get_system_serial(){ |
get_system_serial() |
85 |
|
{ |
86 |
|
local CUR_IP CUR_MAC CUR_MTIME ALX_IFACE |
87 |
|
|
88 |
local CUR_IP CUR_MAC CUR_MTIME |
if [[ ${ALX_CONFD_NETWORKING} = true ]] |
89 |
|
then |
90 |
|
ALX_IFACE="$(< ${SETTINGSPATH}/confd-networking)" |
91 |
|
else |
92 |
|
ALX_IFACE="eth0" |
93 |
|
fi |
94 |
|
|
95 |
# check if serial file exists |
# check if serial file exists |
96 |
if [ -f /etc/alxconfig-ng/serial ] && [ ! -f /hardware-auto-detection ] |
if [ -f /etc/alxconfig-ng/serial ] && [[ ${ALX_FORCED_RECHECK} = false ]] |
97 |
then |
then |
98 |
source /etc/alxconfig-ng/serial |
source /etc/alxconfig-ng/serial |
99 |
|
|
108 |
exit 1 |
exit 1 |
109 |
fi |
fi |
110 |
|
|
111 |
CUR_IP=$(/sbin/ifconfig eth0 | sed -n '/addr:/s/ [^r]*..//gp') |
CUR_IP=$(ifconfig ${ALX_IFACE} | sed -n '/addr:/s/ [^r]*..//gp') |
112 |
CUR_MAC=$(/sbin/ifconfig eth0 | grep HWaddr | cut -d ' ' -f11) |
CUR_MAC=$(ifconfig ${ALX_IFACE} | grep HWaddr | cut -d ' ' -f11) |
113 |
CUR_MTIME=$(date +%s) |
CUR_MTIME=$(date +%s) |
114 |
|
|
115 |
echo -e ${COLOREDSTAR} "Trying to validate my serial ..." |
rc_print "Trying to validate my serial ..." |
116 |
|
|
117 |
# nice serial output |
# nice serial output |
118 |
$CURS_UP |
$CURS_UP |
125 |
else |
else |
126 |
# abort on non valid serial |
# abort on non valid serial |
127 |
ALX_STATE="invalid serial" |
ALX_STATE="invalid serial" |
128 |
echo "ALX_STATE=${ALX_STATE}" > /etc/alxconfig-ng/state/state |
echo "ALX_STATE=\"${ALX_STATE}\"" > /etc/alxconfig-ng/state/state |
129 |
show_invalid_serial_msg |
show_invalid_serial_msg |
130 |
exit 1 |
exit 1 |
131 |
fi |
fi |
133 |
else |
else |
134 |
# run hardware detection |
# run hardware detection |
135 |
echo |
echo |
136 |
if [ -f /hardware-auto-detection ] |
if [[ ${ALX_FORCED_RECHECK} = true ]] |
137 |
then |
then |
138 |
echo -e ${COLMAGENTA}"Hardware autodetection forced by system-administrator"${COLDEFAULT} |
rc_mecho "Hardware autodetection forced by system-administrator" |
139 |
|
# always disable CONFD_NETWORKING here |
140 |
|
export ALX_CONFD_NETWORKING="false" |
141 |
else |
else |
142 |
echo -e ${COLMAGENTA}"Preparing system for first boot"${COLDEFAULT} |
rc_mecho "Preparing system for first boot" |
143 |
fi |
fi |
144 |
ALX_HW_DETECT=true |
ALX_HW_DETECT=true |
145 |
/etc/init.d/hwdetect start |
hwsetup |
146 |
|
|
147 |
# set hostname to alx_default_hostname |
# set hostname to alx_default_hostname |
148 |
# use old hostname if this is a forced re-check |
# use old hostname if this is a forced re-check |
149 |
[ -f /hardware-auto-detection ] && ALX_DEFAULT_HOSTNAME="$(< /etc/hostname)" |
[[ ${ALX_FORCED_RECHECK} = true ]] && ALX_DEFAULT_HOSTNAME="$(< /etc/hostname)" |
150 |
[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx |
[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx |
151 |
HOSTNAME="${ALX_DEFAULT_HOSTNAME}" |
HOSTNAME="${ALX_DEFAULT_HOSTNAME}" |
152 |
|
|
164 |
exit 1 |
exit 1 |
165 |
fi |
fi |
166 |
|
|
167 |
|
|
168 |
CUR_IP=$(/sbin/ifconfig eth0 | sed -n '/addr:/s/ [^r]*..//gp') |
CUR_IP=$(/sbin/ifconfig eth0 | sed -n '/addr:/s/ [^r]*..//gp') |
169 |
CUR_MAC=$(/sbin/ifconfig eth0 | grep HWaddr | cut -d ' ' -f11) |
CUR_MAC=$(/sbin/ifconfig eth0 | grep HWaddr | cut -d ' ' -f11) |
170 |
CUR_MTIME=$(date +%s) |
CUR_MTIME=$(date +%s) |
171 |
|
|
172 |
# abort now if this is a forced re-check |
# abort now if this is a forced re-check |
173 |
if [ -f /hardware-auto-detection ] |
if [[ ${ALX_FORCED_RECHECK} = true ]] |
174 |
then |
then |
175 |
# but first check the serial |
# but first check the serial |
176 |
source /etc/alxconfig-ng/serial |
source /etc/alxconfig-ng/serial |
177 |
|
|
178 |
echo -e ${COLOREDSTAR} "Trying to validate my serial ..." |
rc_print "Trying to validate my serial ..." |
179 |
|
|
180 |
# nice serial output |
# nice serial output |
181 |
$CURS_UP |
$CURS_UP |
194 |
fi |
fi |
195 |
|
|
196 |
# write current state to temp file |
# write current state to temp file |
197 |
echo "ALX_STATE=${ALX_STATE}" > /etc/alxconfig-ng/state/state |
echo "ALX_STATE=\"${ALX_STATE}\"" > /etc/alxconfig-ng/state/state |
198 |
rm /hardware-auto-detection |
[ -f /hardware-auto-detection ] && rm /hardware-auto-detection |
199 |
|
|
200 |
# now export ALX_FORCED_RECHECK=true |
# now export ALX_FORCED_RECHECK=true |
201 |
# that the setting will be updated not inserted ! |
# that the setting will be updated not inserted ! |
203 |
return 0 |
return 0 |
204 |
fi |
fi |
205 |
|
|
206 |
echo -e ${COLOREDSTAR} "Trying to get new serial ..." |
rc_print "Trying to get new serial ..." |
|
|
|
|
# request new serial |
|
|
# ALX_REG_DATE="$(date +%F)" |
|
|
|
|
|
# we're using the mtime now (better for validating the serial) |
|
|
# mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \ |
|
|
# "insert into client_serials( |
|
|
# mtime, |
|
|
# mac |
|
|
# ) |
|
|
# values( |
|
|
# '${CUR_MTIME}', |
|
|
# '${CUR_MAC}' |
|
|
# );" |
|
|
# |
|
|
# # then validate and retrieve serial |
|
|
# |
|
|
# ### warning must be changed that only the LAST ID will be fetched, ### |
|
|
# ### or you get error if the computer name and date are the same ### |
|
|
# ### you have more than one serial number then ### |
|
|
# |
|
|
# # select highest id only (added max) |
|
|
# ALX_SERIAL=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \ |
|
|
# "select max(serial) from client_serials where mtime='${CUR_MTIME}' and mac='${CUR_MAC}'") |
|
207 |
|
|
208 |
# request a new serial; one command now (cause must be done in the same session) |
# request a new serial; one command now (cause must be done in the same session) |
209 |
ALX_SERIAL=$(mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \ |
ALX_SERIAL=$(mysqldo "insert into client_serials (mtime, mac) values('${CUR_MTIME}','${CUR_MAC}'); |
|
"insert into client_serials (mtime, mac) values('${CUR_MTIME}','${CUR_MAC}'); |
|
210 |
select last_insert_id();") |
select last_insert_id();") |
211 |
|
|
212 |
if [ "${ALX_SERIAL}" != NULL ] |
if [[ ${ALX_SERIAL} != NULL ]] |
213 |
then |
then |
214 |
# nice serial output |
# nice serial output |
215 |
$CURS_UP |
$CURS_UP |
216 |
$SET_WCOL |
$SET_WCOL |
217 |
echo "[ SN: ${ALX_SERIAL} ]" |
echo "[ SN: ${ALX_SERIAL} ]" |
218 |
|
|
219 |
# set ALX_STATE to ok so everybody that everything was ok |
# set ALX_STATE to ok so everybody knows that everything was ok |
220 |
ALX_STATE=ok |
ALX_STATE=ok |
221 |
|
|
222 |
echo "ALX_SERIAL=${ALX_SERIAL}" > /etc/alxconfig-ng/serial |
echo "ALX_SERIAL=\"${ALX_SERIAL}\"" > /etc/alxconfig-ng/serial |
223 |
echo "ALX_REG_DATE=${CUR_MTIME}" >> /etc/alxconfig-ng/serial |
echo "ALX_REG_DATE=\"${CUR_MTIME}\"" >> /etc/alxconfig-ng/serial |
224 |
|
|
225 |
evaluate_retval |
evaluate_retval |
226 |
else |
else |
239 |
fi |
fi |
240 |
|
|
241 |
# write current state to temp file |
# write current state to temp file |
242 |
echo "ALX_STATE=${ALX_STATE}" > /etc/alxconfig-ng/state/state |
echo "ALX_STATE=\"${ALX_STATE}\"" > /etc/alxconfig-ng/state/state |
243 |
|
echo "ALX_IFACE=\"${ALX_IFACE}\"" >> /etc/alxconfig-ng/state/state |
244 |
} |
} |
245 |
|
|
246 |
|
|
247 |
check_is_configured() { |
check_is_configured() |
248 |
|
{ |
249 |
if [ -f /etc/alxconfig-ng/state/configured ] |
if [ -f /etc/alxconfig-ng/state/configured ] |
250 |
then |
then |
251 |
export ALX_CONFIGURED=true |
export ALX_CONFIGURED=true |
256 |
|
|
257 |
|
|
258 |
# imports current settings to the database resolved by the hardware detection |
# imports current settings to the database resolved by the hardware detection |
259 |
import_settings_to_db() { |
import_settings_to_db() |
260 |
|
{ |
261 |
# note: networking is always 'dhcp' if hw was autodetected |
# note: networking is always 'dhcp' if hw was autodetected |
262 |
# note: default_domain/hostname is set in config.rc |
# note: default_domain/hostname is set in config.rc |
263 |
|
|
265 |
[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain |
[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain |
266 |
[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx |
[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx |
267 |
|
|
268 |
# vars used by hwdetect |
# vars used by hwsetup |
269 |
local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME |
local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME |
270 |
local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER |
local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER |
271 |
local MOUSETYPE XMOUSETYPE FULLNAME DEVICE |
local MOUSETYPE XMOUSETYPE FULLNAME DEVICE |
272 |
|
|
273 |
# get setting from hwdetect |
# get setting from hwsetup |
274 |
source /etc/sysconfig/hwsetup/knoppix |
source /etc/conf.d/hwsetup/knoppix |
275 |
source /etc/sysconfig/hwsetup/mouse |
source /etc/conf.d/hwsetup/mouse |
276 |
|
|
277 |
echo |
echo |
278 |
echo -e ${COLMAGENTA}"Importing detected settings to database"${COLDEFAULT} |
rc_mecho "Importing detected settings to database" |
279 |
|
|
280 |
# network |
# network |
281 |
echo -e " Network settings ..." |
rc_mecho " Network settings ..." |
282 |
mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \ |
if [[ ${ALX_CONFD_NETWORKING} = true ]] |
283 |
"insert into cfg_network( |
then |
284 |
hostname, |
# get settings |
285 |
serial, |
for iface in $(onboot_interface_list ${network_settings}/net.*) |
286 |
module, |
do |
287 |
domain, |
[[ $(< ${SETTINGSPATH}/confd-networking) != ${iface} ]] && continue |
288 |
networking |
rc_echo "WARNING: only importing settings for interface [ ${iface} ] !" |
289 |
) |
source ${network_settings}/net.${iface} || echo "Error: could not read '${network_settings}/net.${iface}'" |
290 |
values( |
NETCARD_DRIVER="$(cat /etc/modprobe.d/net.${iface}.conf | cut -d' ' -f3)" |
291 |
'${ALX_DEFAULT_HOSTNAME}', |
|
292 |
'${ALX_SERIAL}', |
mysqldo "insert into cfg_network( |
293 |
'${NETCARD_DRIVER}', |
hostname, |
294 |
'${ALX_DEFAULT_DOMAIN}', |
serial, |
295 |
'dhcp' |
module, |
296 |
);" |
domain, |
297 |
|
networking, |
298 |
|
netmask, |
299 |
|
dns, |
300 |
|
gateway, |
301 |
|
broadcast, |
302 |
|
ip, |
303 |
|
forcemacto, |
304 |
|
wireless_bitrate, |
305 |
|
wireless_channel, |
306 |
|
wireless_essid, |
307 |
|
wireless_frequency, |
308 |
|
wireless_mode, |
309 |
|
wireless_nick, |
310 |
|
wireless_auth_mode, |
311 |
|
wireless_key_length, |
312 |
|
wireless_key, |
313 |
|
wireless_key_ascii |
314 |
|
) |
315 |
|
values( |
316 |
|
'${ALX_DEFAULT_HOSTNAME}', |
317 |
|
'${ALX_SERIAL}', |
318 |
|
'${NETCARD_DRIVER}', |
319 |
|
'${ALX_DEFAULT_DOMAIN}', |
320 |
|
'${NETWORKING}', |
321 |
|
'${NETMASK}', |
322 |
|
'${NAMESERVER}', |
323 |
|
'${GATEWAY}', |
324 |
|
'${BROADCAST}', |
325 |
|
'${IP}', |
326 |
|
'${FORCE_MAC_TO}', |
327 |
|
'${WIRELESS_BITRATE}', |
328 |
|
'${WIRELESS_CHANNEL}', |
329 |
|
'${WIRELESS_ESSID}', |
330 |
|
'${WIRELESS_FREQUENCY}', |
331 |
|
'${WIRELESS_MODE}', |
332 |
|
'${WIRELESS_NICK}', |
333 |
|
'${WIRELESS_AUTH_MODE}', |
334 |
|
'${WIRELESS_KEY_LENGTH}', |
335 |
|
'${WIRELESS_KEY}', |
336 |
|
'${WIRELESS_KEY_ASCII}' |
337 |
|
);" |
338 |
|
|
339 |
|
# only insert the *FIRST* iface |
340 |
|
break |
341 |
|
done |
342 |
|
else |
343 |
|
mysqldo "insert into cfg_network( |
344 |
|
hostname, |
345 |
|
serial, |
346 |
|
module, |
347 |
|
domain, |
348 |
|
networking |
349 |
|
) |
350 |
|
values( |
351 |
|
'${ALX_DEFAULT_HOSTNAME}', |
352 |
|
'${ALX_SERIAL}', |
353 |
|
'${NETCARD_DRIVER}', |
354 |
|
'${ALX_DEFAULT_DOMAIN}', |
355 |
|
'dhcp' |
356 |
|
);" |
357 |
|
fi |
358 |
evaluate_retval |
evaluate_retval |
359 |
|
|
360 |
# xserver |
# xserver |
361 |
echo -e " Graphic settings ..." |
rc_mecho " Graphic settings ..." |
362 |
# xserver general |
# xserver general |
363 |
( mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \ |
( mysqldo "insert into cfg_graphic( |
|
"insert into cfg_graphic( |
|
364 |
serial, |
serial, |
365 |
module, |
module, |
366 |
resolution, |
resolution, |
367 |
depth, |
depth, |
368 |
monitorid |
refresh_rate |
369 |
) |
) |
370 |
values( |
values( |
371 |
'${ALX_SERIAL}', |
'${ALX_SERIAL}', |
372 |
'${XMODULE}', |
'${XMODULE}', |
373 |
'1024x768', |
'1024x768', |
374 |
'16', |
'16', |
375 |
'0' |
'60' |
376 |
);"; ) |
);"; ) |
377 |
evaluate_retval |
evaluate_retval |
378 |
|
|
379 |
# input |
# input |
380 |
echo -e " Input settings ..." |
rc_mecho " Input settings ..." |
381 |
mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \ |
mysqldo "insert into cfg_input(serial,mouse) values('${ALX_SERIAL}','${XMOUSETYPE}');" |
|
"insert into cfg_input(serial,mouse) values('${ALX_SERIAL}','${XMOUSETYPE}');" |
|
382 |
evaluate_retval |
evaluate_retval |
383 |
|
|
384 |
# auth |
# auth |
385 |
echo -e " Authentifcation settings ..." |
rc_mecho " Authentification settings ..." |
386 |
mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \ |
mysqldo "insert into client_auth( |
|
"insert into client_auth( |
|
387 |
serial, |
serial, |
388 |
username, |
username, |
389 |
shell, |
shell, |
403 |
|
|
404 |
# exchange ssh rsa keys - the first boot needs this ! |
# exchange ssh rsa keys - the first boot needs this ! |
405 |
# or no reboot will work via the webadmin |
# or no reboot will work via the webadmin |
406 |
echo -e " SSH authentifcation settings ..." |
rc_mecho " SSH authentification settings ..." |
407 |
HOME=/root config_ssh_auth |
HOME=/root config_ssh_auth |
408 |
evaluate_retval |
evaluate_retval |
409 |
|
|
410 |
# input |
# autostart |
411 |
echo -e " Autostart settings ..." |
rc_mecho " Autostart settings ..." |
412 |
mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \ |
mysqldo "insert into cfg_autostart(serial,session) values('${ALX_SERIAL}','');" |
413 |
"insert into cfg_autostart(serial,session) values('${ALX_SERIAL}','');" |
|
414 |
|
# screensaver |
415 |
|
rc_mecho " Screensaver settings ..." |
416 |
|
mysqldo "insert into cfg_screensaver(serial,screensaver) values('${ALX_SERIAL}','')" |
417 |
|
|
418 |
|
# version info |
419 |
|
rc_mecho " OS version info ..." |
420 |
|
local alx_os |
421 |
|
local alx_utils |
422 |
|
alx_os="$(< /etc/mageversion)" |
423 |
|
alx_utils="$(magequery -n alxconfig-ng-alx | sed 's:.*\[\ \(.*\)\ \].*:\1:')" |
424 |
|
alx_utils="${alx_utils/alxconfig-ng-alx-}" |
425 |
|
mysqldo "insert into client_version(serial,os,utils) values('${ALX_SERIAL}','${alx_os}','${alx_utils}')" |
426 |
|
|
427 |
evaluate_retval |
evaluate_retval |
428 |
} |
} |
429 |
|
|
430 |
# imports current settings to the database resolved by the hardware detection |
# imports current settings to the database resolved by the hardware detection |
431 |
update_settings_in_db() { |
update_settings_in_db() |
432 |
|
{ |
433 |
# note: networking is always 'dhcp' if hw was autodetected |
# note: networking is always 'dhcp' if hw was autodetected |
434 |
# note: default_domain/hostname is set in config.rc or exported |
# note: default_domain/hostname is set in config.rc or exported |
435 |
# note: we updating only hardware settings here ! |
# note: we updating only hardware settings here ! |
438 |
[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain |
[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain |
439 |
[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx |
[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx |
440 |
|
|
441 |
# vars used by hwdetect |
# vars used by hwsetup |
442 |
local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME |
local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME |
443 |
local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER |
local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER |
444 |
local MOUSETYPE XMOUSETYPE FULLNAME DEVICE |
local MOUSETYPE XMOUSETYPE FULLNAME DEVICE |
445 |
|
|
446 |
# get setting from hwdetect |
# get setting from hwsetup |
447 |
source /etc/sysconfig/hwsetup/knoppix |
source /etc/conf.d/hwsetup/knoppix |
448 |
source /etc/sysconfig/hwsetup/mouse |
source /etc/conf.d/hwsetup/mouse |
449 |
|
|
450 |
echo |
echo |
451 |
echo -e ${COLMAGENTA}"Updating detected settings in database"${COLDEFAULT} |
rc_mecho "Updating detected settings in database" |
452 |
|
|
453 |
# network |
# network |
454 |
echo -e " Network settings ..." |
rc_mecho " Network settings ..." |
455 |
|
if [[ ${ALX_CONFD_NETWORKING} = true ]] |
456 |
mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \ |
then |
457 |
"update cfg_network set |
# get settings |
458 |
hostname='${ALX_DEFAULT_HOSTNAME}', |
#source ${rc_base}/init.d/network &> /dev/null |
459 |
module='${NETCARD_DRIVER}', |
for iface in $(onboot_interface_list ${network_settings}/net.*) |
460 |
domain='${ALX_DEFAULT_DOMAIN}', |
do |
461 |
networking='dhcp' |
[[ $(< ${SETTINGSPATH}/confd-networking) != ${iface} ]] && continue |
462 |
where serial=${ALX_SERIAL};" |
rc_echo "WARNING: only importing settings for interface [ ${iface} ] !" |
463 |
|
source ${network_settings}/net.${iface} || exit 1 |
464 |
|
NETCARD_DRIVER="$(cat /etc/modprobe.d/net.${iface}.conf | cut -d' ' -f3)" |
465 |
|
|
466 |
|
mysqldo "update cfg_network set |
467 |
|
hostname='${ALX_DEFAULT_HOSTNAME}', |
468 |
|
module='${NETCARD_DRIVER}', |
469 |
|
domain='${ALX_DEFAULT_DOMAIN}', |
470 |
|
networking='${NETWORKING}', |
471 |
|
netmask='${NETMASK}', |
472 |
|
dns='${NAMESERVER}', |
473 |
|
gateway='${GATEWAY}', |
474 |
|
broadcast='${BROADCAST}', |
475 |
|
ip='${IP}', |
476 |
|
forcemacto='${FORCE_MAC_TO}', |
477 |
|
wireless_bitrate='${WIRELESS_BITRATE}', |
478 |
|
wireless_channel='${WIRELESS_CHANNEL}', |
479 |
|
wireless_essid='${WIRELESS_ESSID}', |
480 |
|
wireless_frequency='${WIRELESS_FREQUENCY}', |
481 |
|
wireless_mode='${WIRELESS_MODE}', |
482 |
|
wireless_nick='${WIRELESS_NICK}', |
483 |
|
wireless_auth_mode='${WIRELESS_AUTH_MODE}', |
484 |
|
wireless_key_length='${WIRELESS_KEY_LENGTH}', |
485 |
|
wireless_key='${WIRELESS_KEY}', |
486 |
|
wireless_key_ascii='${WIRELESS_KEY_ASCII}' |
487 |
|
where serial=${ALX_SERIAL};" |
488 |
|
|
489 |
|
# only insert the *FIRST* iface |
490 |
|
break |
491 |
|
done |
492 |
|
else |
493 |
|
mysqldo "update cfg_network set |
494 |
|
hostname='${ALX_DEFAULT_HOSTNAME}', |
495 |
|
module='${NETCARD_DRIVER}', |
496 |
|
domain='${ALX_DEFAULT_DOMAIN}', |
497 |
|
networking='dhcp' |
498 |
|
where serial=${ALX_SERIAL};" |
499 |
|
fi |
500 |
evaluate_retval |
evaluate_retval |
501 |
|
|
502 |
# xserver |
# xserver |
503 |
echo -e " Graphic settings ..." |
rc_mecho " Graphic settings ..." |
504 |
# xserver general |
# xserver general |
505 |
mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \ |
mysqldo "update cfg_graphic set |
|
"update cfg_graphic set |
|
506 |
module='${XMODULE}', |
module='${XMODULE}', |
507 |
resolution='1024x768', |
resolution='1024x768', |
508 |
depth='16', |
depth='16', |
509 |
monitorid='0' |
refresh_rate='60' |
510 |
where serial=${ALX_SERIAL};" |
where serial=${ALX_SERIAL};" |
511 |
evaluate_retval |
evaluate_retval |
512 |
|
|
513 |
# input |
# input |
514 |
echo -e " Input settings ..." |
rc_mecho " Input settings ..." |
515 |
mysql_command ${SQL_USER} ${SQL_PASS} ${SQL_HOST} ${SQL_DB} \ |
mysqldo "update cfg_input set mouse='${XMOUSETYPE}' where serial=${ALX_SERIAL};" |
|
"update cfg_input set |
|
|
mouse='${XMOUSETYPE}' |
|
|
where serial=${ALX_SERIAL};" |
|
516 |
evaluate_retval |
evaluate_retval |
517 |
|
|
518 |
|
# version info |
519 |
|
rc_mecho " OS version info ..." |
520 |
|
local alx_os |
521 |
|
local alx_utils |
522 |
|
alx_os="$(< /etc/mageversion)" |
523 |
|
alx_utils="$(magequery -n alxconfig-ng-alx | sed 's:.*\[\ \(.*\)\ \].*:\1:')" |
524 |
|
alx_utils="${alx_utils/alxconfig-ng-alx-}" |
525 |
|
mysqldo "update client_version set os='${alx_os}', utils='${alx_utils}' where serial=${ALX_SERIAL};" |
526 |
} |
} |
527 |
|
|
528 |
# imports current settings to the local system resolved by the hardware detection |
# imports current settings to the local system resolved by the hardware detection |
529 |
# we only need the network settings |
# we only need the network settings |
530 |
import_settings_local(){ |
import_settings_local() |
531 |
|
{ |
532 |
# note: networking is always 'dhcp' if hw was autodetected |
# note: networking is always 'dhcp' if hw was autodetected |
533 |
# note: default_domain/hostname is set in config.rc |
# note: default_domain/hostname is set in config.rc |
534 |
|
|
536 |
[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain |
[ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain |
537 |
[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx |
[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx |
538 |
|
|
539 |
# vars used by hwdetect |
# vars used by hwsetup |
540 |
local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME |
local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME |
541 |
local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER |
local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER |
542 |
local MOUSETYPE XMOUSETYPE FULLNAME DEVICE |
local MOUSETYPE XMOUSETYPE FULLNAME DEVICE |
543 |
|
|
544 |
# get setting from hwdetect |
# get setting from hwsetup |
545 |
source /etc/sysconfig/hwsetup/knoppix |
source /etc/conf.d/hwsetup/knoppix |
546 |
|
|
547 |
echo |
echo |
548 |
echo -e ${COLMAGENTA}"Importing detected settings to local system"${COLDEFAULT} |
rc_mecho "Importing detected settings to local system" |
549 |
|
|
550 |
[ ! -d ${SETTINGSPATH} ] && install -d ${SETTINGSPATH} |
if [[ ${ALX_CONFD_NETWORKING} = false ]] |
551 |
echo "${NETCARD_DRIVER}" > ${SETTINGSPATH}/modules |
then |
552 |
evaluate_retval |
# set an device alias for modprobe.conf |
553 |
|
[ ! -d /etc/modprobe.d ] && install -d /etc/modprobe.d |
554 |
|
echo "alias eth0 ${NETCARD_DRIVER}" > /etc/modprobe.d/net.eth0.conf |
555 |
|
|
556 |
|
# regenerate modprobe.conf |
557 |
|
[ -x $(which modules-update) ] && modules-update || rc_echo "modules-update not found!" |
558 |
|
evaluate_retval |
559 |
|
fi |
560 |
|
|
561 |
# set system state to 'already configured' |
# set system state to 'already configured' |
562 |
touch /etc/alxconfig-ng/state/configured |
touch /etc/alxconfig-ng/state/configured |
563 |
|
|
564 |
|
# install slim desktopmanager configuration |
565 |
|
config_display_manager |
566 |
|
|
567 |
# if only an recheck was forced than abort now |
# if only an recheck was forced than abort now |
568 |
[[ ${ALX_FORCED_RECHECK} = true ]] && return 0 |
[[ ${ALX_FORCED_RECHECK} = true ]] && return 0 |
569 |
|
|
574 |
# now generate fluxbox config files |
# now generate fluxbox config files |
575 |
|
|
576 |
# fluxbox main config |
# fluxbox main config |
577 |
cat ${ALX_SKELETONS}/fluxbox/init \ |
local fbinit |
578 |
> ${ALX_UNPRIV_HOME}/.fluxbox/init |
if [ -f ${ALX_SKELETONS}/fluxbox/init ] |
579 |
|
then |
580 |
|
fbinit="${ALX_SKELETONS}/fluxbox/init" |
581 |
|
else |
582 |
|
fbinit="/usr/share/fluxbox/init" |
583 |
|
fi |
584 |
|
cat ${fbinit} > ${ALX_UNPRIV_HOME}/.fluxbox/init |
585 |
|
|
586 |
# fluxbox autostart |
# fluxbox autostart |
587 |
cat ${ALX_SKELETONS}/fluxbox/apps \ |
CONFIG="${ALX_UNPRIV_HOME}/.fluxbox/apps" |
588 |
> ${ALX_UNPRIV_HOME}/.fluxbox/apps |
# do not show decorations on messages generated with xmessage |
589 |
|
if [ -x /usr/bin/xmessage ] |
590 |
|
then |
591 |
|
addconfig '[app] (xmessage)' |
592 |
|
addconfig ' [Deco] {NONE}' |
593 |
|
addconfig '[end]' |
594 |
|
fi |
595 |
|
# add icon utility |
596 |
|
[ -x /usr/bin/idesk ] && addconfig '[startup] {nohup idesk > /dev/null &}' |
597 |
|
# add numlock utility |
598 |
|
[ -x /usr/bin/numlockx ] && addconfig '[startup] {nohup numlockx on &}' |
599 |
|
|
600 |
|
# fluxbox hotkeys |
601 |
|
local fbkeys |
602 |
|
if [ -f ${ALX_SKELETONS}/fluxbox/keys ] |
603 |
|
then |
604 |
|
fbkeys="${ALX_SKELETONS}/fluxbox/keys" |
605 |
|
else |
606 |
|
fbkeys="/usr/share/fluxbox/keys" |
607 |
|
fi |
608 |
|
cat ${fbkeys} > ${ALX_UNPRIV_HOME}/.fluxbox/keys |
609 |
|
|
610 |
# fluxbox menu header |
# fluxbox menu header |
611 |
cat ${ALX_SKELETONS}/fluxbox/menu.header \ |
cat ${ALX_SKELETONS}/fluxbox/menu.header > ${ALX_UNPRIV_HOME}/.fluxbox/menu |
|
> ${ALX_UNPRIV_HOME}/.fluxbox/menu |
|
612 |
|
|
613 |
# now fix it with proper messages :P |
# now fix it with proper messages :P |
614 |
local ver="$(< /etc/mageversion)" |
local ver="$(< /etc/mageversion)" |
615 |
sed -i "s:@CHANGEME@:alx-${ver} #${ALX_SERIAL}:g" \ |
sed -i "s:@CHANGEME@:alx-${ver} #${ALX_SERIAL}:g" ${ALX_UNPRIV_HOME}/.fluxbox/menu |
|
${ALX_UNPRIV_HOME}/.fluxbox/menu |
|
616 |
|
|
617 |
# add a newline (maybe there is no crlf in the header) |
# add a newline (maybe there is no crlf in the header) |
618 |
echo >> ${ALX_UNPRIV_HOME}/.fluxbox/menu |
echo >> ${ALX_UNPRIV_HOME}/.fluxbox/menu |
619 |
|
|
620 |
# fluxbox menu footer |
# fluxbox menu footer |
621 |
cat ${ALX_SKELETONS}/fluxbox/menu.footer \ |
cat ${ALX_SKELETONS}/fluxbox/menu.footer >> ${ALX_UNPRIV_HOME}/.fluxbox/menu |
|
>> ${ALX_UNPRIV_HOME}/.fluxbox/menu |
|
622 |
|
|
623 |
# add a newline (maybe there is no crlf in the footer) |
# add a newline (maybe there is no crlf in the footer) |
624 |
echo >> ${ALX_UNPRIV_HOME}/.fluxbox/menu |
echo >> ${ALX_UNPRIV_HOME}/.fluxbox/menu |
625 |
|
|
|
|
|
626 |
# setup some standart icons (sysinfo.lnk) |
# setup some standart icons (sysinfo.lnk) |
|
# basic config |
|
|
cat ${ALX_SKELETONS}/xtdesktop/xtdeskrc > ${ALX_UNPRIV_HOME}/.xtdeskrc |
|
|
|
|
627 |
# clean desktop icon location |
# clean desktop icon location |
628 |
[ -d ${ALX_UNPRIV_HOME}/.xtdesktop ] && rm -rf ${ALX_UNPRIV_HOME}/.xtdesktop |
[ -d ${ALX_UNPRIV_HOME}/.idesktop ] && rm -rf ${ALX_UNPRIV_HOME}/.idesktop |
629 |
install -d ${ALX_UNPRIV_HOME}/.xtdesktop |
install -d ${ALX_UNPRIV_HOME}/.idesktop |
630 |
|
|
631 |
|
# add shutdown, reboot icons |
632 |
|
local name |
633 |
|
# default settings |
634 |
|
declare -i x=30 |
635 |
|
declare -i y=30 |
636 |
|
for i in shutdown reboot |
637 |
|
do |
638 |
|
case ${i} in |
639 |
|
shutdown) name="Herunterfahren" ;; |
640 |
|
reboot) name="Neustarten" ;; |
641 |
|
esac |
642 |
|
|
643 |
|
generate_icon \ |
644 |
|
--name "${name}" \ |
645 |
|
--command "/usr/lib/alxconfig-ng/bin/user_${i}.sh" \ |
646 |
|
--icon "${ALX_SESSIONS_ICONS}/${i}.png" \ |
647 |
|
--dest "${dest}/${i}.lnk" \ |
648 |
|
--xres "${x}" \ |
649 |
|
--yres "${y}" |
650 |
|
|
651 |
|
y=$((${y} + 80)) |
652 |
|
done |
653 |
|
|
654 |
# last but not least gen a icon with some sys informations |
# last but not least gen a icon with some sys informations |
655 |
local sysinfo |
local sysinfo |
671 |
--name "${sysinfo}" \ |
--name "${sysinfo}" \ |
672 |
--command "exit 0" \ |
--command "exit 0" \ |
673 |
--icon "${ALX_SESSIONS_ICONS}/sysinfo.png" \ |
--icon "${ALX_SESSIONS_ICONS}/sysinfo.png" \ |
674 |
--dest "${ALX_UNPRIV_HOME}/.xtdesktop/sysinfo.lnk" \ |
--dest "${ALX_UNPRIV_HOME}/.idesktop/sysinfo.lnk" \ |
675 |
--xres "${xres}" \ |
--xres "${xres}" \ |
676 |
--yres "${yres}" \ |
--yres "${yres}" \ |
677 |
--icon-width "1" \ |
--icon-width "1" \ |
681 |
chown ${ALX_UNPRIV_USER}:${ALX_UNPRIV_GROUP} ${ALX_UNPRIV_HOME} |
chown ${ALX_UNPRIV_USER}:${ALX_UNPRIV_GROUP} ${ALX_UNPRIV_HOME} |
682 |
chown ${ALX_UNPRIV_USER}:${ALX_UNPRIV_GROUP} ${ALX_UNPRIV_HOME}/.fluxbox |
chown ${ALX_UNPRIV_USER}:${ALX_UNPRIV_GROUP} ${ALX_UNPRIV_HOME}/.fluxbox |
683 |
chmod 0755 ${ALX_UNPRIV_HOME}/.fluxbox |
chmod 0755 ${ALX_UNPRIV_HOME}/.fluxbox |
684 |
chmod 0755 ${ALX_UNPRIV_HOME}/.xtdesktop |
chmod 0755 ${ALX_UNPRIV_HOME}/.idesktop |
685 |
chmod 0644 ${ALX_UNPRIV_HOME}/.xtdeskrc |
if [ -f ${ALX_UNPRIV_HOME}/.ideskrc ] |
686 |
|
then |
687 |
# default passwords are bad |
chmod 0644 ${ALX_UNPRIV_HOME}/.ideskrc |
688 |
#usermod -p $(perl -e "printf(crypt('foobar','AD'))") root |
fi |
|
#usermod -p $(perl -e "printf(crypt('foobar','AD'))") ${ALX_UNPRIV_USER} |
|
|
#smbpasswd -a root foobar |
|
689 |
} |
} |
690 |
|
|
691 |
# start|stop |
# start|stop |
692 |
preliminary_network(){ |
preliminary_network() |
693 |
|
{ |
694 |
local module |
local module |
695 |
|
|
696 |
if [ -f /etc/alxconfig-ng/state/configured ] |
if [ -f /etc/alxconfig-ng/state/configured ] |
697 |
then |
then |
698 |
# get module name |
# compat for old clients |
699 |
module=$(cat ${SETTINGSPATH}/modules) |
if [ -f ${SETTINGSPATH}/modules ] |
700 |
modprobe ${module} |
then |
701 |
|
# get module name |
702 |
|
module=$(cat ${SETTINGSPATH}/modules) |
703 |
|
modprobe ${module} |
704 |
|
fi |
705 |
|
|
706 |
else |
else |
707 |
# vars used by hwdetect |
# vars used by hwsetup |
708 |
local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME |
local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME |
709 |
local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER |
local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER |
710 |
|
|
711 |
# get setting from hwdetect |
# get setting from hwsetup |
712 |
source /etc/sysconfig/hwsetup/knoppix |
source /etc/conf.d/hwsetup/knoppix |
713 |
modprobe ${NETCARD_DRIVER} |
modprobe ${NETCARD_DRIVER} |
714 |
fi |
fi |
715 |
|
|
718 |
# keeping like always safe: |
# keeping like always safe: |
719 |
# no network should be startet here, |
# no network should be startet here, |
720 |
# so we can delete all pid files if one exists |
# so we can delete all pid files if one exists |
721 |
if ps -A|grep dhcpcd > /dev/null |
if [[ ! -z $(pidof $(basename ${ALX_DHCP_PROG})) ]] |
722 |
then |
then |
723 |
echo -e ${COLMAGENTA}"Forcing network down"${COLDEFAULT} |
rc_mecho "Forcing network down" |
724 |
dhcpcd -k |
killall $(basename ${ALX_DHCP_PROG}) &> /dev/null |
725 |
sleep 1 |
sleep 1 |
|
else |
|
|
rm -f /var/run/dhcpcd-eth?.pid |
|
726 |
fi |
fi |
727 |
|
[[ ${ALX_CONFD_NETWORKING} = true ]] && ${rc_base}/init.d/network stop |
728 |
|
|
729 |
echo -e ${COLMAGENTA}"Starting preliminary network ... "${COLDEFAULT} |
rc_mecho "Starting preliminary networking ... " |
|
# -t 10 timeout of 10 secs |
|
|
dhcpcd -t 10 &> /dev/null |
|
|
|
|
|
# aka_fix ######################################## |
|
|
#ifconfig eth0 128.20.222.222 netmask 255.255.0.0 up |
|
|
#route del default gw 128.20.50.13 &> /dev/null |
|
|
#route add default gw 128.20.50.21 &> /dev/null |
|
|
#echo "nameserver 128.20.50.21" > /etc/resolv.conf |
|
|
################################################## |
|
730 |
|
|
731 |
evaluate_retval |
# start network configured from /etc/conf.d |
732 |
|
if [[ ${ALX_CONFD_NETWORKING} = true ]] |
733 |
|
then |
734 |
|
${rc_base}/init.d/network start |
735 |
|
else |
736 |
|
rc_print "Starting default dhcp based networking ... " |
737 |
|
${ALX_DHCP_PROG} ${ALX_DHCP_START} &> /dev/null |
738 |
|
evaluate_retval |
739 |
|
fi |
740 |
;; |
;; |
741 |
|
|
742 |
stop) |
stop) |
743 |
echo -e ${COLMAGENTA}"Stopping preliminary network ... "${COLDEFAULT} |
rc_mecho "Stopping preliminary networking ... " |
744 |
ifconfig eth0 down |
if [[ ${ALX_CONFD_NETWORKING} = true ]] |
|
if ps -A|grep dhcpcd > /dev/null |
|
745 |
then |
then |
746 |
dhcpcd -z &> /dev/null |
${rc_base}/init.d/network stop |
747 |
|
else |
748 |
|
rc_print "Stopping default dhcp based networking ... " |
749 |
|
ifconfig ${ALX_IFACE} down |
750 |
|
fi |
751 |
|
if [[ ! -z $(pidof $(basename ${ALX_DHCP_PROG})) ]] |
752 |
|
then |
753 |
|
killall $(basename ${ALX_DHCP_PROG}) &> /dev/null |
754 |
|
sleep 1 |
755 |
fi |
fi |
756 |
evaluate_retval |
evaluate_retval |
757 |
;; |
;; |
762 |
esac |
esac |
763 |
} |
} |
764 |
|
|
765 |
|
reset_system_settings() |
766 |
|
{ |
767 |
|
# force load of de kbdkeys |
768 |
|
loadkeys -q de |
769 |
|
rc_echo |
770 |
|
rc_echo -en ${COLRED} |
771 |
|
rc_echo -n "*** Warning: you are about to reset *all* local settings on this system!" |
772 |
|
rc_echo -e ${COLDEFAULT} |
773 |
|
rc_echo "*** Do you really want to continue ?" |
774 |
|
rc_echo -n "*** Enter 'yes' to continue, anything else to abort: " |
775 |
|
read kbinsert |
776 |
|
if [[ ${kbinsert} = yes ]] |
777 |
|
then |
778 |
|
rc_echo -en ${COLRED} |
779 |
|
rc_echo -n "*** OK, you really want it ... killing all settings: " |
780 |
|
for i in 3 2 1 now |
781 |
|
do |
782 |
|
rc_echo -n " ${i}" |
783 |
|
sleep 1 |
784 |
|
done |
785 |
|
rc_echo -e ${COLDEFAULT} |
786 |
|
|
787 |
|
## reset all settings: |
788 |
|
rm -rf ${SETTINGSPATH}/* |
789 |
|
rm -f /etc/alxconfig-ng/serial |
790 |
|
rm -rf /etc/alxconfig-ng/state |
791 |
|
|
792 |
|
# clear all printers & net-shares |
793 |
|
:> /etc/printcap |
794 |
|
|
795 |
|
# remove lprng |
796 |
|
rc-config del lprng &> /dev/null |
797 |
|
|
798 |
|
# remove all user settings |
799 |
|
[ -d ${ALX_UNPRIV_HOME} ] && rm -rf ${ALX_UNPRIV_HOME} |
800 |
|
|
801 |
|
# remove all ica-sessions |
802 |
|
find ${ALX_ICA_SESSIONS} -type f -name '*.ica' | xargs rm |
803 |
|
|
804 |
|
# remove all old nics and modules configs |
805 |
|
find /etc/conf.d -type f -name 'net.*' | xargs rm |
806 |
|
find /etc/modprobe.d -type f -name 'net.*' | xargs rm |
807 |
|
|
808 |
|
# restore default networking |
809 |
|
cat ${ALX_SKELETONS}/net/net.eth0 > /etc/conf.d/net.eth0 |
810 |
|
|
811 |
|
rc_echo "I am done now, press [Enter] to reboot system ..." |
812 |
|
else |
813 |
|
rc_echo "Aborted, press [Enter] to reboot system ..." |
814 |
|
fi |
815 |
|
read |
816 |
|
reboot |
817 |
|
} |
818 |
|
|
819 |
|
onboot_interface_list() |
820 |
|
{ |
821 |
|
local file |
822 |
|
local devices |
823 |
|
local iface |
824 |
|
|
825 |
|
# get list of all devices |
826 |
|
for file in $@ |
827 |
|
do |
828 |
|
if [[ $(read_value ONBOOT ${file}) = yes ]] |
829 |
|
then |
830 |
|
iface="$(basename ${file} | sed s/net.//)" |
831 |
|
# exclude backup files |
832 |
|
case "${iface}" in |
833 |
|
*~) ;; |
834 |
|
*) devices="${devices} $(basename ${file} | sed s/net.//)" ;; |
835 |
|
esac |
836 |
|
fi |
837 |
|
done |
838 |
|
|
839 |
|
echo "${devices}" |
840 |
|
} |
841 |
|
|
842 |
|
# read values from net.* files |
843 |
|
read_value() |
844 |
|
{ |
845 |
|
local var="$1" |
846 |
|
local file="$2" |
847 |
|
local value |
848 |
|
|
849 |
|
# local all possible vars |
850 |
|
# global |
851 |
|
local ONBOOT |
852 |
|
local NETWORKING |
853 |
|
|
854 |
|
# static |
855 |
|
local IP |
856 |
|
local NETMASK |
857 |
|
local BROADCAST |
858 |
|
local NETWORKING |
859 |
|
local FORCE_MAC_TO |
860 |
|
|
861 |
|
# dhcp |
862 |
|
local DHCP_PROG |
863 |
|
local DHCP_START |
864 |
|
local DHCP_STOP |
865 |
|
|
866 |
|
# default gw |
867 |
|
local GATEWAY |
868 |
|
local GATEWAY_IF |
869 |
|
|
870 |
|
# wireless extensions |
871 |
|
local WIRELESS_AP |
872 |
|
local WIRELESS_AUTH_MODE |
873 |
|
local WIRELESS_BITRATE |
874 |
|
local WIRELESS_CHANNEL |
875 |
|
local WIRELESS_DEFAULT_KEY |
876 |
|
local WIRELESS_ESSID |
877 |
|
local WIRELESS_FREQUENCY |
878 |
|
local WIRELESS_KEY |
879 |
|
local WIRELESS_KEY_ASCII |
880 |
|
local WIRELESS_KEY_0 |
881 |
|
local WIRELESS_KEY_1 |
882 |
|
local WIRELESS_KEY_2 |
883 |
|
local WIRELESS_KEY_3 |
884 |
|
local WIRELESS_KEY_LENGTH |
885 |
|
local WIRELESS_MODE |
886 |
|
local WIRELESS_NICK |
887 |
|
local WIRELESS_NWID |
888 |
|
local WIRELESS_POWER |
889 |
|
|
890 |
|
source ${file} |
891 |
|
eval value=\$$(echo ${var}) |
892 |
|
echo "${value}" |
893 |
|
} |
894 |
|
|
895 |
case $1 in |
case $1 in |
896 |
start) |
start) |
897 |
|
# check for global overrides |
898 |
|
[ -f ${SETTINGSPATH}/confd-networking ] && ALX_CONFD_NETWORKING=true |
899 |
|
[ -f /hardware-auto-detection ] && ALX_FORCED_RECHECK=true |
900 |
|
read_cmdline hardware-auto-detection && ALX_FORCED_RECHECK=true |
901 |
|
read_cmdline alx-reset-settings && ALX_RESET_SETTINGS=true |
902 |
|
|
903 |
|
# kill all settings if requested |
904 |
|
if [[ ${ALX_RESET_SETTINGS} = true ]] |
905 |
|
then |
906 |
|
reset_system_settings |
907 |
|
fi |
908 |
|
|
909 |
# retrieve or validate current serial |
# retrieve or validate current serial |
910 |
get_system_serial |
get_system_serial |
911 |
if [[ ${ALX_HW_DETECT} = true ]] |
if [[ ${ALX_HW_DETECT} = true ]] |
926 |
|
|
927 |
# now setup system configuration |
# now setup system configuration |
928 |
# alx_setup_or_whatever_it_will_be_called() |
# alx_setup_or_whatever_it_will_be_called() |
929 |
[ "${ALX_HW_DETECT}" == "false" ] && update_system_settings |
[[ ${ALX_HW_DETECT} = false ]] && update_system_settings |
930 |
|
|
931 |
# stop at last the preliminary networking (dhcp) |
# stop at last the preliminary networking (dhcp) |
932 |
preliminary_network stop |
preliminary_network stop |
938 |
[ -f /etc/alxconfig-ng/state/state ] && rm /etc/alxconfig-ng/state/state |
[ -f /etc/alxconfig-ng/state/state ] && rm /etc/alxconfig-ng/state/state |
939 |
sleep 0.1 |
sleep 0.1 |
940 |
;; |
;; |
941 |
|
|
942 |
*) |
*) |
943 |
echo "Usage: $0 {start|stop} ..." |
echo "Usage: $0 {start|stop} ..." |
944 |
;; |
;; |
945 |
esac |
esac |
|
|
|