trunk/alx-config/setup_xfree.sh

#!/bin/bash
source /etc/alx-config/config.rc

default_xfreeconf(){

cat > /etc/X11/XF86Config << "EOF"
Section "Module"

    Load        "dbe"  	# Double buffer extension
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

    Load        "type1"
    Load        "speedo"
    Load        "freetype"
#    Load        "xtt"
#    Load       "glx"
    Load       "dri"
    Load "vnc"

EndSection

Section "Files"

    RgbPath	"/usr/X11R6/lib/X11/rgb"

    FontPath   "/usr/X11R6/lib/X11/fonts/local/"
    FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    #prevents slow startup when disabled -> speedo, type1
    #FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
    #FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
    FontPath   "/usr/X11R6/lib/X11/fonts/TrueType/"
    FontPath   "/usr/X11R6/lib/X11/fonts/freefont/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"

# The module search path.  The default path is shown here.

#    ModulePath "/usr/X11R6/lib/modules"

EndSection

Section "ServerFlags"

# ctrl+alt+fn disabled; dont't allow to switch consoles
#    Option "DontVTSwitch"

# ctrl+alt+backspace disabled; don't restart the xserver
#    Option "DontZap"

# ctrl+alt+[+]/[-] disabled; don't allow to change resolution
#    Option "Dont Zoom"

EndSection

Section "InputDevice"

    Identifier	"Keyboard1"
    Driver	"Keyboard"
    
    Option "AutoRepeat" "500 30"
#    Option	"Xleds"      "1 2 3"
    Option "XkbRules"	"xfree86"
    Option "XkbModel"	"pc104"
    Option "XkbLayout"	"de"

EndSection


Section "InputDevice"

    Identifier	"Mouse1"
    Driver	"mouse"
    
    Option "Protocol"    "PS/2"
    Option "Device"      "/dev/psaux"
    Option "Resolution"	"1200"
    Option "ZAxisMapping" "4 5"

EndSection

#vnc
Section "InputDevice"
    Identifier "vncKeyboard"
    Driver "rfbkeyb"
EndSection

Section "InputDevice"
    Identifier "vncMouse"
    Driver "rfbmouse"
EndSection


Section "Monitor"
    # Aamazing CM-1528-FS    
    Identifier  "mon0"
    HorizSync   28-64
    VertRefresh 47-104

EndSection


Section "Device"
    Identifier  "vga0"
    Driver      "vesa"
    #VideoRam    32768
    # Insert Clocks lines here if appropriate

    # vnc options
    # By default, no password is required.
    # The next rfbauth uses the root password for vncserver
    Option "rfbauth"     "/root/.vnc/passwd"
    Option "rfbport"     "5900"

    # The use one of the next ...shared options ("nevershared" is the default)
    #Option "nevershared"
    Option "alwaysshared"

    Option "dontdisconnect"

    # To activate the http server
    Option "httpdir"     "/usr/share/vnc/classes"
    Option "httpport"    "5800"

    # For XEvents
    # The local user must accept the new connection.
    # An X application must be used to send the acceptance back to the server.
    # Using the extension library as detailed above. 
    # Option "useraccept"

    # Enable the vnc service on this device, IMPORTANT!!!!!!!!!!!!
    Option "usevnc"

    # The options below are new in the 4.3.0 release

    # Only listen on the localhost interface
    # Option "localhost"

    # Listen on a specific interface
    # Option "interface" "192.168.0.1"

    # View only session
    # Option "viewonly"
### monitor settings lesen ###
	source $SETTINGS_TEMPLATE/system/monitor/monitor
    # The option below is new in the 4.3.0.4 release
    # Option "loginauth"

EndSection


Section "Screen"
    Identifier  "Screen 1"
    Device      "vga0"
    Monitor     "mon0"
    DefaultDepth 16

    Subsection "Display"
        Depth       8
        Modes       "1024x768"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "1024x768"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1024x768"
        ViewPort    0 0
    EndSubsection
EndSection

Section "ServerLayout"

    Identifier  "Simple Layout"
    Screen "Screen 1"
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

    #vnc
    InputDevice "vncMouse"    "ExtraPointer"
    InputDevice "vncKeyboard" "ExtraKeyboard"

EndSection

# Section "DRI"
#    Mode 0666
# EndSection
EOF
}


setup_xfreeconf(){
	
	mkdir -p $SETTINGS_TEMPLATE/system
	rm -rf $SETTINGS_TEMPLATE/system/vga
	rm -rf $SETTINGS_TEMPLATE/system/mouse
	rm -rf $SETTINGS_TEMPLATE/system/monitor
	cp -R $SETTINGS_TEMPLATE/menu/vga $SETTINGS_TEMPLATE/system
	cp -R $SETTINGS_TEMPLATE/menu/mouse $SETTINGS_TEMPLATE/system
	cp -R $SETTINGS_TEMPLATE/menu/monitor $SETTINGS_TEMPLATE/system


	MOUSEPROT="`cat $SETTINGS_TEMPLATE/system/mouse/mouse`"
	VGADRIV="`cat $SETTINGS_TEMPLATE/system/vga/vga`"
	vgadepth="`cat $SETTINGS_TEMPLATE/system/vga/vgadepth`"
	resolution="`cat $SETTINGS_TEMPLATE/system/vga/vgares`"
	### monitor settings lesen ###
	source $SETTINGS_TEMPLATE/system/monitor/monitor
	
	
	if [ -z "${MOUSEPROT}" \
		-o -z "${VGADRIV}" \
		-o -z "${vgadepth}" \
		-o -z "${resolution}" \
		-o -z "${myvendor}" \
		-o -z "${mymodel}" \
		-o -z "${hsync}" \
		-o -z "${vref}" ]
	then
		echo "Not all needed VARS are set"
		exit 1
	fi
	
	
	[ -f /etc/X11/XF86Config ] && mv /etc/X11/XF86Config /etc/X11/XF86Config.old
	
	cat > /etc/X11/XF86Config << "EOF"
Section "Module"

    Load        "dbe"  	# Double buffer extension
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

    Load        "type1"
    Load        "speedo"
    Load        "freetype"
#    Load        "xtt"
#    Load       "glx"
    Load       "dri"
EOF

if [ "${LOADVNC}" == "true" ]
then
	echo '    Load "vnc"'		>> /etc/X11/XF86Config
fi


	cat >> /etc/X11/XF86Config << "EOF"
EndSection

Section "Files"

    RgbPath	"/usr/X11R6/lib/X11/rgb"

    FontPath   "/usr/X11R6/lib/X11/fonts/local/"
    FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    #prevents slow startup when disabled -> speedo, type1
    #FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
    #FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
    FontPath   "/usr/X11R6/lib/X11/fonts/TrueType/"
    FontPath   "/usr/X11R6/lib/X11/fonts/freefont/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"

# The module search path.  The default path is shown here.

#    ModulePath "/usr/X11R6/lib/modules"

EndSection

Section "ServerFlags"

# ctrl+alt+fn disabled; dont't allow to switch consoles
#    Option "DontVTSwitch"

# ctrl+alt+backspace disabled; don't restart the xserver
#    Option "DontZap"

# ctrl+alt+[+]/[-] disabled; don't allow to change resolution
#    Option "Dont Zoom"

EndSection

Section "InputDevice"

    Identifier	"Keyboard1"
    Driver	"Keyboard"
    
    Option "AutoRepeat" "500 30"
#    Option	"Xleds"      "1 2 3"
    Option "XkbRules"	"xfree86"
    Option "XkbModel"	"pc104"
    Option "XkbLayout"	"de"

EndSection


Section "InputDevice"

    Identifier	"Mouse1"
    Driver	"mouse"

EOF

case ${MOUSEPROT} in
	PS/2)
		echo '    Option "Protocol"    "PS/2"'		>> /etc/X11/XF86Config
		echo '    Option "Device"      "/dev/psaux"'	>> /etc/X11/XF86Config
		echo '    Option "Resolution"	"1200"'		>> /etc/X11/XF86Config
		;;
	IMPS/2)
		echo '    Option "Protocol"    "IMPS/2"'	>> /etc/X11/XF86Config
		echo '    Option "Device"      "/dev/psaux"'	>> /etc/X11/XF86Config
		echo '    Option "Resolution"	"1200"'		>> /etc/X11/XF86Config
		echo '    Option "ZAxisMapping" "4 5"'		>> /etc/X11/XF86Config
		;;
	Auto)
		echo '    Option "Protocol"    "Auto"'		>> /etc/X11/XF86Config
		echo '    Option "Device"      "/dev/ttys0"'	>> /etc/X11/XF86Config
		echo '    Option "Resolution"	"1200"'		>> /etc/X11/XF86Config
		;;
esac

	cat >> /etc/X11/XF86Config << "EOF"
EndSection
EOF

	if [ "${LOADVNC}" == "true" ]
	then
		cat >> /etc/X11/XF86Config << "EOF"
#vnc
Section "InputDevice"
    Identifier "vncKeyboard"
    Driver "rfbkeyb"
EndSection

Section "InputDevice"
    Identifier "vncMouse"
    Driver "rfbmouse"
EndSection
EOF
	fi

##monitor setup

echo 'Section "Monitor"'		>> /etc/X11/XF86Config
echo "    # ${myvendor} ${mymodel}"	>> /etc/X11/XF86Config
echo '    Identifier  "mon0"'		>> /etc/X11/XF86Config
echo "    HorizSync   ${hsync}"		>> /etc/X11/XF86Config
echo "    VertRefresh ${vref}"		>> /etc/X11/XF86Config
		cat >> /etc/X11/XF86Config << "EOF"

EndSection


Section "Device"
    Identifier  "vga0"
    Driver      "vesa"
    #VideoRam    32768
    # Insert Clocks lines here if appropriate
EOF
	if [ "${LOADVNC}" == "true" ]
	then
		cat >> /etc/X11/XF86Config << "EOF"
    # vnc options
    # By default, no password is required.
    # The next rfbauth uses the root password for vncserver
    Option "rfbauth"     "/root/.vnc/passwd"
    Option "rfbport"     "5900"

    # The use one of the next ...shared options ("nevershared" is the default)
    #Option "nevershared"
    Option "alwaysshared"

    Option "dontdisconnect"

    # To activate the http server
    Option "httpdir"     "/usr/share/vnc/classes"
    Option "httpport"    "5800"

    # For XEvents
    # The local user must accept the new connection.
    # An X application must be used to send the acceptance back to the server.
    # Using the extension library as detailed above. 
    # Option "useraccept"

    # Enable the vnc service on this device, IMPORTANT!!!!!!!!!!!!
    Option "usevnc"

    # The options below are new in the 4.3.0 release

    # Only listen on the localhost interface
    # Option "localhost"

    # Listen on a specific interface
    # Option "interface" "192.168.0.1"

    # View only session
    # Option "viewonly"

    # The option below is new in the 4.3.0.4 release
    # Option "loginauth"
EOF
	fi
	
	cat >> /etc/X11/XF86Config << "EOF"
EndSection


Section "Screen"
    Identifier  "Screen 1"
    Device      "vga0"
    Monitor     "mon0"
EOF

echo "    DefaultDepth ${vgadepth}"		>> /etc/X11/XF86Config
echo '    Subsection "Display"'			>> /etc/X11/XF86Config
echo "        Depth       ${vgadepth}"  	>> /etc/X11/XF86Config
echo "        Modes       \"${resolution}\""  	>> /etc/X11/XF86Config
echo '        ViewPort    0 0'			>> /etc/X11/XF86Config
echo '    EndSubsection'			>> /etc/X11/XF86Config

	cat >> /etc/X11/XF86Config << "EOF"
EndSection

Section "ServerLayout"

    Identifier  "Simple Layout"
    Screen "Screen 1"
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

EOF
	if [ "${LOADVNC}" == "true" ]
	then
		cat >> /etc/X11/XF86Config << "EOF"
    #vnc
    InputDevice "vncMouse"    "ExtraPointer"
    InputDevice "vncKeyboard" "ExtraKeyboard"
EOF
	fi

	cat >> /etc/X11/XF86Config << "EOF"
EndSection

# Section "DRI"
#    Mode 0666
# EndSection
EOF

}


setup_xfreeconf
1	#!/bin/bash
2	source /etc/alx-config/config.rc
3
4	default_xfreeconf(){
5
6	cat > /etc/X11/XF86Config << "EOF"
7	Section "Module"
8
9	Load "dbe" # Double buffer extension
10	SubSection "extmod"
11	Option "omit xfree86-dga" # don't initialise the DGA extension
12	EndSubSection
13
14	Load "type1"
15	Load "speedo"
16	Load "freetype"
17	# Load "xtt"
18	# Load "glx"
19	Load "dri"
20	Load "vnc"
21
22	EndSection
23
24	Section "Files"
25
26	RgbPath "/usr/X11R6/lib/X11/rgb"
27
28	FontPath "/usr/X11R6/lib/X11/fonts/local/"
29	FontPath "/usr/X11R6/lib/X11/fonts/misc/"
30	FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
31	FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
32	#prevents slow startup when disabled -> speedo, type1
33	#FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
34	#FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
35	FontPath "/usr/X11R6/lib/X11/fonts/TrueType/"
36	FontPath "/usr/X11R6/lib/X11/fonts/freefont/"
37	FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
38	FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
39
40	# The module search path. The default path is shown here.
41
42	# ModulePath "/usr/X11R6/lib/modules"
43
44	EndSection
45
46	Section "ServerFlags"
47
48	# ctrl+alt+fn disabled; dont't allow to switch consoles
49	# Option "DontVTSwitch"
50
51	# ctrl+alt+backspace disabled; don't restart the xserver
52	# Option "DontZap"
53
54	# ctrl+alt+[+]/[-] disabled; don't allow to change resolution
55	# Option "Dont Zoom"
56
57	EndSection
58
59	Section "InputDevice"
60
61	Identifier "Keyboard1"
62	Driver "Keyboard"
63
64	Option "AutoRepeat" "500 30"
65	# Option "Xleds" "1 2 3"
66	Option "XkbRules" "xfree86"
67	Option "XkbModel" "pc104"
68	Option "XkbLayout" "de"
69
70	EndSection
71
72
73	Section "InputDevice"
74
75	Identifier "Mouse1"
76	Driver "mouse"
77
78	Option "Protocol" "PS/2"
79	Option "Device" "/dev/psaux"
80	Option "Resolution" "1200"
81	Option "ZAxisMapping" "4 5"
82
83	EndSection
84
85	#vnc
86	Section "InputDevice"
87	Identifier "vncKeyboard"
88	Driver "rfbkeyb"
89	EndSection
90
91	Section "InputDevice"
92	Identifier "vncMouse"
93	Driver "rfbmouse"
94	EndSection
95
96
97	Section "Monitor"
98	# Aamazing CM-1528-FS
99	Identifier "mon0"
100	HorizSync 28-64
101	VertRefresh 47-104
102
103	EndSection
104
105
106	Section "Device"
107	Identifier "vga0"
108	Driver "vesa"
109	#VideoRam 32768
110	# Insert Clocks lines here if appropriate
111
112	# vnc options
113	# By default, no password is required.
114	# The next rfbauth uses the root password for vncserver
115	Option "rfbauth" "/root/.vnc/passwd"
116	Option "rfbport" "5900"
117
118	# The use one of the next ...shared options ("nevershared" is the default)
119	#Option "nevershared"
120	Option "alwaysshared"
121
122	Option "dontdisconnect"
123
124	# To activate the http server
125	Option "httpdir" "/usr/share/vnc/classes"
126	Option "httpport" "5800"
127
128	# For XEvents
129	# The local user must accept the new connection.
130	# An X application must be used to send the acceptance back to the server.
131	# Using the extension library as detailed above.
132	# Option "useraccept"
133
134	# Enable the vnc service on this device, IMPORTANT!!!!!!!!!!!!
135	Option "usevnc"
136
137	# The options below are new in the 4.3.0 release
138
139	# Only listen on the localhost interface
140	# Option "localhost"
141
142	# Listen on a specific interface
143	# Option "interface" "192.168.0.1"
144
145	# View only session
146	# Option "viewonly"
147	### monitor settings lesen ###
148	source $SETTINGS_TEMPLATE/system/monitor/monitor
149	# The option below is new in the 4.3.0.4 release
150	# Option "loginauth"
151
152	EndSection
153
154
155	Section "Screen"
156	Identifier "Screen 1"
157	Device "vga0"
158	Monitor "mon0"
159	DefaultDepth 16
160
161	Subsection "Display"
162	Depth 8
163	Modes "1024x768"
164	ViewPort 0 0
165	EndSubsection
166	Subsection "Display"
167	Depth 16
168	Modes "1024x768"
169	ViewPort 0 0
170	EndSubsection
171	Subsection "Display"
172	Depth 24
173	Modes "1024x768"
174	ViewPort 0 0
175	EndSubsection
176	EndSection
177
178	Section "ServerLayout"
179
180	Identifier "Simple Layout"
181	Screen "Screen 1"
182	InputDevice "Mouse1" "CorePointer"
183	InputDevice "Keyboard1" "CoreKeyboard"
184
185	#vnc
186	InputDevice "vncMouse" "ExtraPointer"
187	InputDevice "vncKeyboard" "ExtraKeyboard"
188
189	EndSection
190
191	# Section "DRI"
192	# Mode 0666
193	# EndSection
194	EOF
195	}
196
197
198
199	setup_xfreeconf(){
200
201	mkdir -p $SETTINGS_TEMPLATE/system
202	rm -rf $SETTINGS_TEMPLATE/system/vga
203	rm -rf $SETTINGS_TEMPLATE/system/mouse
204	rm -rf $SETTINGS_TEMPLATE/system/monitor
205	cp -R $SETTINGS_TEMPLATE/menu/vga $SETTINGS_TEMPLATE/system
206	cp -R $SETTINGS_TEMPLATE/menu/mouse $SETTINGS_TEMPLATE/system
207	cp -R $SETTINGS_TEMPLATE/menu/monitor $SETTINGS_TEMPLATE/system
208
209
210	MOUSEPROT="`cat $SETTINGS_TEMPLATE/system/mouse/mouse`"
211	VGADRIV="`cat $SETTINGS_TEMPLATE/system/vga/vga`"
212	vgadepth="`cat $SETTINGS_TEMPLATE/system/vga/vgadepth`"
213	resolution="`cat $SETTINGS_TEMPLATE/system/vga/vgares`"
214	### monitor settings lesen ###
215	source $SETTINGS_TEMPLATE/system/monitor/monitor
216
217
218	if [ -z "${MOUSEPROT}" \
219	-o -z "${VGADRIV}" \
220	-o -z "${vgadepth}" \
221	-o -z "${resolution}" \
222	-o -z "${myvendor}" \
223	-o -z "${mymodel}" \
224	-o -z "${hsync}" \
225	-o -z "${vref}" ]
226	then
227	echo "Not all needed VARS are set"
228	exit 1
229	fi
230
231
232
233	[ -f /etc/X11/XF86Config ] && mv /etc/X11/XF86Config /etc/X11/XF86Config.old
234
235	cat > /etc/X11/XF86Config << "EOF"
236	Section "Module"
237
238	Load "dbe" # Double buffer extension
239	SubSection "extmod"
240	Option "omit xfree86-dga" # don't initialise the DGA extension
241	EndSubSection
242
243	Load "type1"
244	Load "speedo"
245	Load "freetype"
246	# Load "xtt"
247	# Load "glx"
248	Load "dri"
249	EOF
250
251	if [ "${LOADVNC}" == "true" ]
252	then
253	echo ' Load "vnc"' >> /etc/X11/XF86Config
254	fi
255
256
257	cat >> /etc/X11/XF86Config << "EOF"
258	EndSection
259
260	Section "Files"
261
262	RgbPath "/usr/X11R6/lib/X11/rgb"
263
264	FontPath "/usr/X11R6/lib/X11/fonts/local/"
265	FontPath "/usr/X11R6/lib/X11/fonts/misc/"
266	FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
267	FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
268	#prevents slow startup when disabled -> speedo, type1
269	#FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
270	#FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
271	FontPath "/usr/X11R6/lib/X11/fonts/TrueType/"
272	FontPath "/usr/X11R6/lib/X11/fonts/freefont/"
273	FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
274	FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
275
276	# The module search path. The default path is shown here.
277
278	# ModulePath "/usr/X11R6/lib/modules"
279
280	EndSection
281
282	Section "ServerFlags"
283
284	# ctrl+alt+fn disabled; dont't allow to switch consoles
285	# Option "DontVTSwitch"
286
287	# ctrl+alt+backspace disabled; don't restart the xserver
288	# Option "DontZap"
289
290	# ctrl+alt+[+]/[-] disabled; don't allow to change resolution
291	# Option "Dont Zoom"
292
293	EndSection
294
295	Section "InputDevice"
296
297	Identifier "Keyboard1"
298	Driver "Keyboard"
299
300	Option "AutoRepeat" "500 30"
301	# Option "Xleds" "1 2 3"
302	Option "XkbRules" "xfree86"
303	Option "XkbModel" "pc104"
304	Option "XkbLayout" "de"
305
306	EndSection
307
308
309	Section "InputDevice"
310
311	Identifier "Mouse1"
312	Driver "mouse"
313
314	EOF
315
316	case ${MOUSEPROT} in
317	PS/2)
318	echo ' Option "Protocol" "PS/2"' >> /etc/X11/XF86Config
319	echo ' Option "Device" "/dev/psaux"' >> /etc/X11/XF86Config
320	echo ' Option "Resolution" "1200"' >> /etc/X11/XF86Config
321	;;
322	IMPS/2)
323	echo ' Option "Protocol" "IMPS/2"' >> /etc/X11/XF86Config
324	echo ' Option "Device" "/dev/psaux"' >> /etc/X11/XF86Config
325	echo ' Option "Resolution" "1200"' >> /etc/X11/XF86Config
326	echo ' Option "ZAxisMapping" "4 5"' >> /etc/X11/XF86Config
327	;;
328	Auto)
329	echo ' Option "Protocol" "Auto"' >> /etc/X11/XF86Config
330	echo ' Option "Device" "/dev/ttys0"' >> /etc/X11/XF86Config
331	echo ' Option "Resolution" "1200"' >> /etc/X11/XF86Config
332	;;
333	esac
334
335	cat >> /etc/X11/XF86Config << "EOF"
336	EndSection
337	EOF
338
339	if [ "${LOADVNC}" == "true" ]
340	then
341	cat >> /etc/X11/XF86Config << "EOF"
342	#vnc
343	Section "InputDevice"
344	Identifier "vncKeyboard"
345	Driver "rfbkeyb"
346	EndSection
347
348	Section "InputDevice"
349	Identifier "vncMouse"
350	Driver "rfbmouse"
351	EndSection
352	EOF
353	fi
354
355	##monitor setup
356
357	echo 'Section "Monitor"' >> /etc/X11/XF86Config
358	echo " # ${myvendor} ${mymodel}" >> /etc/X11/XF86Config
359	echo ' Identifier "mon0"' >> /etc/X11/XF86Config
360	echo " HorizSync ${hsync}" >> /etc/X11/XF86Config
361	echo " VertRefresh ${vref}" >> /etc/X11/XF86Config
362	cat >> /etc/X11/XF86Config << "EOF"
363
364	EndSection
365
366
367	Section "Device"
368	Identifier "vga0"
369	Driver "vesa"
370	#VideoRam 32768
371	# Insert Clocks lines here if appropriate
372	EOF
373	if [ "${LOADVNC}" == "true" ]
374	then
375	cat >> /etc/X11/XF86Config << "EOF"
376	# vnc options
377	# By default, no password is required.
378	# The next rfbauth uses the root password for vncserver
379	Option "rfbauth" "/root/.vnc/passwd"
380	Option "rfbport" "5900"
381
382	# The use one of the next ...shared options ("nevershared" is the default)
383	#Option "nevershared"
384	Option "alwaysshared"
385
386	Option "dontdisconnect"
387
388	# To activate the http server
389	Option "httpdir" "/usr/share/vnc/classes"
390	Option "httpport" "5800"
391
392	# For XEvents
393	# The local user must accept the new connection.
394	# An X application must be used to send the acceptance back to the server.
395	# Using the extension library as detailed above.
396	# Option "useraccept"
397
398	# Enable the vnc service on this device, IMPORTANT!!!!!!!!!!!!
399	Option "usevnc"
400
401	# The options below are new in the 4.3.0 release
402
403	# Only listen on the localhost interface
404	# Option "localhost"
405
406	# Listen on a specific interface
407	# Option "interface" "192.168.0.1"
408
409	# View only session
410	# Option "viewonly"
411
412	# The option below is new in the 4.3.0.4 release
413	# Option "loginauth"
414	EOF
415	fi
416
417	cat >> /etc/X11/XF86Config << "EOF"
418	EndSection
419
420
421	Section "Screen"
422	Identifier "Screen 1"
423	Device "vga0"
424	Monitor "mon0"
425	EOF
426
427	echo " DefaultDepth ${vgadepth}" >> /etc/X11/XF86Config
428	echo ' Subsection "Display"' >> /etc/X11/XF86Config
429	echo " Depth ${vgadepth}" >> /etc/X11/XF86Config
430	echo " Modes \"${resolution}\"" >> /etc/X11/XF86Config
431	echo ' ViewPort 0 0' >> /etc/X11/XF86Config
432	echo ' EndSubsection' >> /etc/X11/XF86Config
433
434	cat >> /etc/X11/XF86Config << "EOF"
435	EndSection
436
437	Section "ServerLayout"
438
439	Identifier "Simple Layout"
440	Screen "Screen 1"
441	InputDevice "Mouse1" "CorePointer"
442	InputDevice "Keyboard1" "CoreKeyboard"
443
444	EOF
445	if [ "${LOADVNC}" == "true" ]
446	then
447	cat >> /etc/X11/XF86Config << "EOF"
448	#vnc
449	InputDevice "vncMouse" "ExtraPointer"
450	InputDevice "vncKeyboard" "ExtraKeyboard"
451	EOF
452	fi
453
454	cat >> /etc/X11/XF86Config << "EOF"
455	EndSection
456
457	# Section "DRI"
458	# Mode 0666
459	# EndSection
460	EOF
461
462	}
463
464
465	setup_xfreeconf