Magellan Linux

  • Back to homepage
    • /[alx-svn]/alx-src/trunk/alxinstall-ng/ChangeLog

    Contents of /alx-src/trunk/alxinstall-ng/ChangeLog

    Parent Directory Parent Directory | Revision Log Revision Log

    Revision 6857 - (show annotations) (download)
    Thu Jul 23 14:31:57 2015 UTC (8 years, 9 months ago) by niro
    File size: 11397 byte(s) 
    -updated ChangeLog
    1 2015-07-23 Niels Rogalla <niro@magellan-linux.de>
    2
    3 * [r6856] VERSION:
    4 -version 0.4.99.1
    5 * [r6855] Makefile:
    6 -install the right functions
    7 * [r6854] ChangeLog, Makefile, VERSION:
    8 -revert changes
    9 * [r6853] ChangeLog, Makefile, VERSION:
    10 -install the right functions
    11 * [r6852] Makefile, bin/alxinstall-ng.sh.in:
    12 -varable libdir
    13 * [r6851] bin/alxinstall-ng.sh.in:
    14 -fixed a typo
    15 * [r6850] bin/alxinstall-ng.sh.in:
    16 -fixed broken mkinitrd generation
    17 * [r6849] bin/alxinstall-ng.sh.in:
    18 -fixed hdd partitions on method auto with a flashdisk detected
    19 * [r6848] bin/alxinstall-ng.sh.in:
    20 -revert changes, it is not the f2fs but the ext2 fs
    21 * [r6847] bin/alxinstall-ng.sh.in:
    22 -minimal filesystem size is 100M for f2fs
    23 * [r6846] bin/alxinstall-ng.sh.in:
    24 -detect flashdisk on auto installation and setup them propably
    25 * [r6845] VERSION:
    26 -version 0.4.99.0, new development cycle
    27 * [r6844] bin/alxinstall-ng.sh.in:
    28 -not every mkfs.FS prog like the -q option, pipe the output into
    29 a log file instead
    30 * [r6843] bin/alxinstall-ng.sh.in:
    31 -die probably and fixed a typo
    32 * [r6842] bin/alxinstall-ng.sh.in:
    33 -show one more line in main dialog menus to display all content
    34 without scrolling
    35 * [r6841] bin/alxinstall-ng.sh.in:
    36 -reduce special treatments required to use f2fs and make it
    37 easier to integrate other filesystems in the future
    38 * [r6840] bin/alxinstall-ng.sh.in:
    39 -reoder conditions for fstab creation and honor f2fs grub issues
    40 * [r6839] bin/alxinstall-ng.sh.in:
    41 -more addconfig() usage
    42 * [r6838] bin/alxinstall-ng.sh.in:
    43 -get rid of which
    44 * [r6837] bin/alxinstall-ng.sh.in:
    45 -added rudimantary f2fs support
    46 * [r6836] functions/generic.sh:
    47 -renamed INSTALLPATH variable to INSTALL_ROOT
    48 * [r6835] bin/alxinstall-ng.sh.in:
    49 -renamed INSTALLPATH variable to INSTALL_ROOT
    50 * [r6834] bin/alxinstall-ng.sh.in:
    51 -make use of the new addconfig()/cleaconfig() and
    52 enter_chroot_installrc() functions
    53 * [r6833] functions/generic.sh:
    54 -introduce enter_chroot() and enter_chroot_installrc() functions
    55 * [r6832] bin/alxinstall-ng.sh.in:
    56 -fixed spelling
    57 * [r6831] bin/alxinstall-ng.sh.in, functions/generic.sh:
    58 -introduce is_loc_mounted() function and set proper exit traps
    59 * [r6830] functions/hwdetection.sh:
    60 -fixed whitespaces
    61 * [r6829] bin/alxinstall-ng.sh.in, functions/generic.sh[ADD]:
    62 -introduce addconfig() and clearconfig() function
    63 * [r6828] bin/alxinstall-ng.sh.in:
    64 -setup_hdd_format(): honor FORMAT_FILESYSTEM
    65 * [r6827] bin/alxinstall-ng.sh.in:
    66 -always initialize all disk variables to unset previosly selected
    67 with other install methods
    68 * [r6826] bin/alxinstall-ng.sh.in:
    69 -consolidate even more functions
    70 * [r6825] bin/alxinstall-ng.sh.in:
    71 -consolidate install functions for every single method
    72 * [r6824] bin/alxinstall-ng.sh.in:
    73 -fixed install type description
    74 * [r6823] bin/alxinstall-ng.sh.in:
    75 -renamed all _simple() functions to _single()
    76 * [r6822] bin/alxinstall-ng.sh.in:
    77 -fixed whitespaces
    78 * [r6821] bin/alxinstall-ng.sh.in:
    79 -fixed whitespaces
    80 * [r6820] Makefile, bin/alxinstall-ng.sh.in:
    81 use @@VERSION@@ as sed target
    82 * [r6819] bin/alxinstall-ng.sh.in:
    83 -simplify the header
    84 * [r6818] bin/alxinstall-ng.sh.in:
    85 -fixed some descriptions
    86 * [r6817] bin/alxinstall-ng.sh.in:
    87 -fixed whitespaces
    88 * [r6816] bin/alxinstall-ng.sh.in, functions/findhdd.sh[DEL],
    89 functions/hwdetection.sh[ADD]:
    90 -reworked disk hardware detection to work with newer and older
    91 system kernels
    92 * [r6815] bin/alxinstall-ng.sh.in:
    93 -use LC_ALL=C and ignore the environment settings
    94
    95 2015-07-22 Niels Rogalla <niro@magellan-linux.de>
    96
    97 * [r6799] bin/alxinstall-ng.sh.in:
    98 -renamed all _flash() functions to _simple()
    99
    100 2015-07-21 Niels Rogalla <niro@magellan-linux.de>
    101
    102 * [r6773] ChangeLog:
    103 -updated ChangeLog
    104 * [r6772] VERSION:
    105 -version 0.3.18
    106 * [r6771] bin/alxinstall-ng.sh.in:
    107 -honor radeon KMS
    108 * [r6770] bin/alxinstall-ng.sh.in:
    109 -fixed whitespaces
    110
    111 2014-04-22 Niels Rogalla <niro@magellan-linux.de>
    112
    113 * [r5577] ChangeLog:
    114 -updated ChangeLog
    115 * [r5576] VERSION:
    116 -version 0.3.17
    117 * [r5575] bin/alxinstall-ng.sh.in:
    118 -fixed KMS support for i845 devices
    119
    120 2013-08-07 Niels Rogalla <niro@magellan-linux.de>
    121
    122 * [r5010] ChangeLog:
    123 -updated Changelog
    124 * [r5007] VERSION:
    125 -version 0.3.16
    126 * [r5006] bin/alxinstall-ng.sh.in:
    127 -one empty line after formfactor message and use . and not ! for
    128 special device messages
    129 * [r5005] bin/alxinstall-ng.sh.in:
    130 -better visuals for powersave mode message
    131 * [r5004] bin/alxinstall-ng.sh.in:
    132 -fixed a typo
    133 * [r5003] bin/alxinstall-ng.sh.in:
    134 -honor cpufreq.governor=ondemand on latop formfactor devices to
    135 keep temperatures and batterie usage low
    136
    137 2013-05-15 Niels Rogalla <niro@magellan-linux.de>
    138
    139 * [r4855] ChangeLog:
    140 -updated ChangeLog
    141 * [r4854] VERSION:
    142 -version 0.3.15
    143 * [r4853] bin/alxinstall-ng.sh.in:
    144 -disabled i810 frambuffer for maxdateclients, segfaults with KMS
    145 enabled intel Xorg drivers
    146
    147 2013-05-13 Niels Rogalla <niro@magellan-linux.de>
    148
    149 * [r4849] ChangeLog:
    150 -updated ChangeLog
    151 * [r4848] VERSION:
    152 -version 0.3.14
    153 * [r4847] bin/alxinstall-ng.sh.in:
    154 -support zotacs with nvidia chips and use new introduced
    155 SPLASH_DEV variable
    156
    157 2012-03-28 Niels Rogalla <niro@magellan-linux.de>
    158
    159 * [r3379] ChangeLog:
    160 -updated ChangeLog
    161 * [r3378] VERSION:
    162 -version 0.3.13
    163 * [r3376] bin/alxinstall-ng.sh.in:
    164 -only install required drm modules on zotac devices to fix
    165 framebuffer glitches with other loaded drivers, like with the sis
    166 driver(FS#13)
    167 * [r3374] bin/alxinstall-ng.sh.in:
    168 -added quirk required by some intel framebuffer devices
    169 * [r3373] bin/alxinstall-ng.sh.in:
    170 -fixed a typo (FS#12)
    171
    172 2011-09-28 Niels Rogalla <niro@magellan-linux.de>
    173
    174 * [r3267] ChangeLog:
    175 -updated ChangeLog
    176 * [r3266] VERSION:
    177 -version 0.3.12
    178 * [r3260] bin/alxinstall-ng.sh.in:
    179 -detect i810/i815 chipsets as 'maxdata'
    180 -use i810fb framebuffer driver on i810/i815 chipsets
    181 -install an appropriate i810fb.conf with a 1024x768 resolution
    182
    183 2011-09-22 Niels Rogalla <niro@magellan-linux.de>
    184
    185 * [r3256] bin/alxinstall-ng.sh.in:
    186 -use vesafb for rangees instead of viafb. some CLE266 Chipsets
    187 does not run with viafb
    188
    189 2011-09-14 Niels Rogalla <niro@magellan-linux.de>
    190
    191 * [r3204] ChangeLog:
    192 -updated ChangeLog
    193 * [r3203] VERSION:
    194 -version 0.3.11
    195 * [r3202] bin/alxinstall-ng.sh.in:
    196 -load viafb for rangee devices
    197 -do not load any fb modules for zotacs, which use KMS
    198 -use uvesafb for standard pc which do not support KMS
    199 * [r3199] bin/alxinstall-ng.sh.in:
    200 -added rengee detection
    201 -detect flashdisk with 256MB and below and apply grub2 bootsector
    202 fix
    203
    204 2011-08-11 Niels Rogalla <niro@magellan-linux.de>
    205
    206 * [r2738] ChangeLog:
    207 -updated ChangeLog
    208 * [r2737] VERSION:
    209 -version 0.3.10
    210 * [r2736] bin/alxinstall-ng.sh.in:
    211 -let grub2 search for special boot params for zotac devices and
    212 co, hwinfo stuff only needed for grub-legacy
    213
    214 2011-07-04 Niels Rogalla <niro@magellan-linux.de>
    215
    216 * [r2575] ChangeLog:
    217 -updated ChangeLog
    218 * [r2574] VERSION:
    219 -version 0.3.9
    220 * [r2573] bin/alxinstall-ng.sh.in:
    221 -fixed grub2 handling
    222 -do not overwrite .bashrc -> using .installrc
    223 -split modules in proper variabls and install kms/drm and
    224 framebuffer modules + modprobe configs to enable bootsplash
    225 * [r2559] ChangeLog:
    226 -updated ChangeLog
    227 * [r2558] VERSION:
    228 -version 0.3.8
    229 * [r2557] bin/alxinstall-ng.sh.in:
    230 -default video mode 1024x768 for kms
    231 - honor $KERNELOPTS in grub2
    232 * [r2555] bin/alxinstall-ng.sh.in:
    233 -fixed spelling and added splash theme settings for grub legacy
    234 * [r2554] bin/alxinstall-ng.sh.in:
    235 -support grub2
    236
    237 2011-06-15 Niels Rogalla <niro@magellan-linux.de>
    238
    239 * [r2393] ChangeLog[ADD]:
    240 -added ChangeLog
    241 * [r2392] Makefile:
    242 -get version from VERSION file and remove generated files on
    243 clean macro
    244 * [r2391] Makefile, VERSION[ADD], bin/alxinstall-ng.sh.in:
    245 -variable version tag
    246 * [r2390] bin/alxinstall-ng.sh[DEL], bin/alxinstall-ng.sh.in[CPY]:
    247 renamed to alxinstall-ng.sh.in
    248 * [r2389] bin/alxinstall-ng.sh:
    249 -version 0.3.7
    250 * [r2388] bin/alxinstall-ng.sh:
    251 -use hwinfo for zotac detection
    252 * [r2387] bin/alxinstall-ng.sh:
    253 -variable target filesystem
    254
    255 2010-10-18 Niels Rogalla <niro@magellan-linux.de>
    256
    257 * [r1579] bin/alxinstall-ng.sh:
    258 -added some nice colors
    259 * [r1577] bin/alxinstall-ng.sh:
    260 -explain more
    261 -version 0.3.6
    262 * [r1576] functions/findhdd.sh:
    263 -remove bootdevices from install list
    264 * [r1574] bin/alxinstall-ng.sh:
    265 -added hardware detection, which supports zotac devices
    266 -auto partitioning support
    267 -make use of tmp files more secure
    268 -variable kernel, mkinitrd and uuid support
    269 -renamed get_blkid() to get_uuid()
    270 -renamed dialog_setup_hdd_found_manuell() to
    271 dialog_hardware_detection()
    272 -renamed install_mkinitrd_chroot() to install_initrd_chroot()
    273 -version 0.3.5
    274
    275 2009-08-05 Niels Rogalla <niro@magellan-linux.de>
    276
    277 * [r1187] bin/alxinstall-ng.sh:
    278 -fixed some issues, if already UUIDs are used in the fstab
    279 -do not add swap to fstab anymore, busybox handle all swap
    280 partitions with 'swapon/off -a'
    281 -fixed fstab typos, UUID= must used as prefix and without any
    282 escape chars
    283 -version 0.3.4
    284 * [r1180] bin/alxinstall-ng.sh:
    285 -using UUIDs via blkid instead of static device-names
    286
    287 2009-08-04 Niels Rogalla <niro@magellan-linux.de>
    288
    289 * [r1169] bin/alxinstall-ng.sh:
    290 -more modules for initrd
    291 * [r1126] make-tarball.sh:
    292 -fixed make-tarball script fpr svn usage
    293 * [r1123] bin/alxinstall-ng.sh:
    294 -fixed grub.conf setup
    295
    296 2008-06-28 Niels Rogalla <niro@magellan-linux.de>
    297
    298 * [r531] bin/alxinstall-ng.sh:
    299 -install network config skeleton
    300
    301 2008-06-27 Niels Rogalla <niro@magellan-linux.de>
    302
    303 * [r529] Makefile[ADD], make-tarball.sh[ADD]:
    304 -added a Makefile and the make-tarball script
    305 * [r528] bin/alxinstall-ng.sh:
    306 -create mkinitrd after creation of the fstab
    307 * [r527] bin/alxinstall-ng.sh:
    308 -fixed a typo again
    309 * [r526] bin/alxinstall-ng.sh:
    310 -fixed a typo
    311 * [r525] bin/alxinstall-ng.sh:
    312 -busybox compat
    313 * [r524] bin/alxinstall-ng.sh:
    314 -cleanups and fixed a typo
    315 * [r523] bin/alxinstall-ng.sh:
    316 -create mkinitrd
    317 * [r522] bin/alxinstall-ng.sh:
    318 -removed unnecessary stuff and fixed grub and fstab settings
    319 * [r521] functions/findhdd.sh:
    320 -increase version and many style updates
    321 * [r520] bin/alxinstall-ng.sh:
    322 -increase version and many style updates
    323 * [r519] bin/alxinstall-ng.sh:
    324 -removed comments
    325
    326 2005-08-17 Niels Rogalla <niro@magellan-linux.de>
    327
    328 * [r280] bin/alxinstall-ng.sh:
    329 added flash support; oh an i have to rewrite this crappy thing
    330
    331 2005-04-19 Niels Rogalla <niro@magellan-linux.de>
    332
    333 * [r268] bin/alxinstall-ng.sh:
    334 set grub timeout to 0, and fixed a typo in the fstab creation
    335
    336 2005-04-18 Niels Rogalla <niro@magellan-linux.de>
    337
    338 * [r262] functions/findhdd.sh:
    339 added some comments for the udev issue
    340 * [r261] bin/alxinstall-ng.sh:
    341 fixed kernel2.6 udev issue
    342 * [r260] bin/alxinstall-ng.sh:
    343 fixed some issues when started from init
    344 * [r259] .[ADD], bin[ADD], bin/alxinstall-ng.sh[CPY],
    345 functions[ADD], functions/findhdd.sh[CPY]:
    346 This commit was generated by cvs2svn to compensate for changes in
    347 r50,
    348 which included commits to RCS files with non-trunk default
    349 branches.
    350