alxinstall-ng/bin/alxinstall-ng.sh.in

#!/bin/sh
#
# $Header: /home/cvsd/alx-cvs/alx-src/alxinstall-ng/bin/alxinstall-ng.sh,v 1.4 2005-04-19 17:24:57 niro Exp $
#
# AutoSta_LX Installation Script
# version: 0.8b
#
# Niels Rogalla <niro@magellan-linux.de>
#		<rogalla@augusta-bochum.de>
#
#
# Install Navigation Gui
#

#source /etc/alx_version
#source /opt/alx-config/version

#source /etc/alx-config/config.rc

#images: (get ${CDIMAGENAME})
source /mnt/cdrom/system/images.conf

#Includes
source /usr/lib/alxinstall-ng/functions/findhdd.sh > /dev/null
### bugfix ###############################
cdromdev="`echo $cdromdev|sed -e 's/ //'`"
########################################

### System/Config Version
VERSION="0.1"
TITLE="alxinstall-ng - ${VERSION}"

#CONFIGS_TEMPLATE="/opt/alx-config/configs"

CDPATH="/mnt/cdrom"
INSTALLPATH="/mnt/magellan"

### WICHTIG: anzahl lines in der autosta_lx.tar.gz -1
CURRENTLINE=0
#TOTALLINES=11072 # -> now in images.conf


#################################################
#		  DIALOG BOXEN			#
#################################################

die() {
	#clear
	#echo -e "\nhuch, da ist ein script gestorben -> $?\n"
	#read
	#exit 0
	ERROR=$1
	RETVAL=$?
	dialog_install_failure
	exit 1
}

dialog_warning() {
	dialog \
	--backtitle "$TITLE" \
	--colors \
	--defaultno \
	--yesno "\Z1 !!! Achtung !!! \Zn\n\n\
	Diese Festplatte wird unwiederruflich geloescht werden.\n\n\
		Soll ich wirklich fortfahren ?" 10 70
	RES=$?
	if [ "$RES" == "1" ]
	then
		clear
		echo "Der Vorgang wurde abgebrochen."
		exit 1
	fi
}

dialog_setup_hdd_info(){
	local SHDD="`echo $HDD|sed -e 's/\/dev\///'`"

	dialog \
	--colors \
	--title "[ Festplatten Partitionierung ]" \
	--backtitle "$TITLE" \
	--ok-label "Weiter" \
	--msgbox "\nBitte legen Sie 3 Partitionen an.\n\n\
		[ \Z3${SHDD}1\Zn ] Typ: \Z3Linux\Zn mit ca. 50MB\n\
		[ \Z3${SHDD}2\Zn ] Typ: \Z3Linux Swap\Zn mit ca. 256MB\n\
		[ \Z3${SHDD}3\Zn ] Typ: \Z3Linux \Zn mit dem Rest (min. 256MB)\n\n\
		Bitte ${SHDD}1 als \Z3bootable\Zn markieren." 12 81
}

dialog_setup_hdd_menu() {

	I=`dialog \
	--backtitle "$TITLE" \
	--title "[ Festplatten Partitionierung ]" \
	--cancel-label "Abbrechen" \
	--ok-label "Weiter" \
	--stdout \
	--menu "\nWaehlen Sie zwischen Manuell und Automatisch" 14 70 5 \
	"1" "Manuell" \
	"2" "Automatisch"`
	RES=$?
	if [ "$RES" == "1" ];then
		return 1
	fi
	if [ "$RES" == "0" ];then
		case "$I" in
        		"1")
				dialog_setup_hdd_found_manuell
				;;
			"2")
				dialog_warning
				setup_hdd_partitions_silent
			     	;;
		esac
	fi
}

dialog_setup_hdd_found_manuell() {
	if [ ! -z "$installdevs" ]
	then
		installdevs=""
	fi

	echo "dialog \\"  > /tmp/hddtmp.sh
	echo "--backtitle \"$TITLE\" \\" >> /tmp/hddtmp.sh
	echo "--ok-label \"Weiter\" \\" >> /tmp/hddtmp.sh
	echo "--stdout \\" >> /tmp/hddtmp.sh
	echo "--colors \\" >> /tmp/hddtmp.sh
	echo "--msgbox \"Gefundene Hardware:\n\n \\" >> /tmp/hddtmp.sh
	echo "	Festplatten:\n \\" >> /tmp/hddtmp.sh

	if [ ! -z "$scsidisks" ]
	then
		for I in $scsidisks
		do
			if [ "$I" != "$cdromdev" ]
			then
				echo "		\\Z7SCSI: \\Z3$I\\Zn\n \\" >> /tmp/hddtmp.sh
				installdevs="$installdevs $I"
			fi
		done
	fi

	if [ ! -z "$idedisks" ]
	then
		for I in $idedisks
		do
			if [ "$I" != "$cdromdev" ]
			then
				echo "		\\Z7IDE:  \\Z3$I\\Zn\n \\" >> /tmp/hddtmp.sh
				installdevs="$installdevs $I"
			fi
		done
	fi

	if [ ! -z "$cdromdev" ]
	then
		echo "	\n \\" >> /tmp/hddtmp.sh
		echo "	\\Z7andere Laufwerke:\n \\" >> /tmp/hddtmp.sh
		echo "		CDROM: \\Z3$cdromdev\\Zn\n \\" >> /tmp/hddtmp.sh
	fi
	echo "	\" 13 70" >> /tmp/hddtmp.sh
	chmod a+x /tmp/hddtmp.sh
	/tmp/hddtmp.sh
}

dialog_setup_hdd_partitions_manuell() {
	if [ -z "$installdevs" ]
	then
		dialog \
		--backtitle "$TITLE" \
		--ok-label "Beenden" \
		--msgbox "Kein geeignetes Laufwerk gefunden.\nDie Installation ist fehlgeschlagen." 6 70
		exit 1
	else

		echo "dialog \\" > /tmp/hddtmp.sh
		echo "--backtitle \"$TITLE\" \\" >> /tmp/hddtmp.sh
		echo "--ok-label \"Weiter\" \\" >> /tmp/hddtmp.sh
		echo "--cancel-label \"Beenden\" \\" >> /tmp/hddtmp.sh
		echo "--stdout \\" >> /tmp/hddtmp.sh
		echo "--menu \"Installations Laufwerk auswaehlen:\" 10 70 3 \\" >> /tmp/hddtmp.sh

		for I in $installdevs
		do
			echo "\"$I\" \"\" \\" >> /tmp/hddtmp.sh
		done
		echo -e "\n" >> /tmp/hddtmp.sh

		chmod a+x /tmp/hddtmp.sh
		HDD="`/tmp/hddtmp.sh`"
		RES=$?
		if [ "$RES" == "1" ]
		then
			return 1
		fi
		if [ "$RES" == "0" ]
		then
			dialog_setup_hdd_info
			setup_hdd_partitions_manuell
		fi
	fi
}

dialog_setup_hdd_partitions_silent() {
	dialog \
	--backtitle "$TITLE" \
	--infobox "Erstelle Partitionen ..." 3 70
}

dialog_setup_hdd_format() {
	dialog \
	--backtitle "$TITLE" \
	--infobox "Erstelle Datei-Systeme ..." 3 70
}

dialog_install_settings() {
	dialog \
	--backtitle "$TITLE" \
	--infobox "Speichere System-Einstellungen ..." 3 70
}

dialog_install_system_image() {
	dialog \
	--backtitle "$TITLE" \
	--gauge "Kopiere System-Image ..." 6 80
}

dialog_install_meter() {
	while [ "${CURRENTLINE}" != "${TOTALLINES}" ] ; do
		CURRENTLINE=`grep --count . /tmp/install.log`
		PERCENT=`expr ${CURRENTLINE} \* 100 / ${TOTALLINES}`
		echo ${PERCENT}
		sleep 1
	done
	rm -f /tmp/install.log
	return 0
}


dialog_install_bootsector() {
	dialog \
	--backtitle "$TITLE" \
	--infobox "Schreibe den Bootsektor ..." 3 70
}

dialog_install_alxconfig() {
	dialog \
	--backtitle "$TITLE" \
	--infobox "Installiere die ALX Setup-Tools ..." 3 70
}

dialog_install_kernel_image() {
	dialog \
	--backtitle "$TITLE" \
	--infobox "Installiere den System-Kernel ..." 3 70

}

dialog_install_hotfixes() {
	dialog \
	--backtitle "$TITLE" \
	--infobox "Installiere Hotfixes ..." 3 70

}

dialog_install_successful() {
	dialog \
	--backtitle "$TITLE" \
	--colors \
	--msgbox "Die Installation war \Z2erfolgreich\Zn." 5 81
}

dialog_install_failure() {
	dialog \
	--backtitle "$TITLE" \
	--colors \
	--msgbox "Die Installation ist \Z1Fehlgeschlagen\Zn.\n\n\
		Fehler bei $ERROR, RetVal: $RETVAL \
	" 10 81
}

dialog_install_method() {

	METHOD=`dialog \
	--backtitle "$TITLE" \
	--cancel-label "Abbrechen" \
	--ok-label "Weiter" \
	--stdout \
	--menu "Konfiguration" 14 70 5 \
	"1" "Normale Installation" \
	"2" "Silent Installation"`
	RES=$?
	if [ "$RES" == "1" ];then
		return 1
	fi
	if [ "$RES" == "0" ];then
		case "$METHOD" in
        		"1")
				run_install_normal
				;;
			"2")
				dialog_warning
				run_install_silent
			     	;;
		esac
	fi
}

dialog_main() {
	METHOD=0

	while [ $METHOD -le 2 ]
	do
		METHOD=`dialog \
		--backtitle "$TITLE" \
		--no-cancel \
		--ok-label "Weiter" \
		--stdout \
		--menu "Konfiguration" 14 70 5 \
		"1" "AutoSta_LX installieren" \
		"2" "Uebersicht gefundener Laufwerke" \
		"3" "Beenden und neustarten" \
		"4" "Beenden und eine Shell starten" `
		RES=$?
		if [ "$RES" == "1" ];then
			exit 1
		fi
		if [ "$RES" == "0" ];then
			case "$METHOD" in
        			"1")	
					#only for now later it will be used again
					#with 6.1-r2 only one install method available
					#dialog_install_method
					run_install_normal
					;;
				"2") 	dialog_setup_hdd_found_manuell
					;;
				"3")	install_do_reboot
					;;
				"4")	/bin/bash --login -i
					;;
			esac
		fi
	done
}

#################################################
#		Install Komandos		#
#################################################
setup_hdd_partitions_manuell() {
	BOOTHDD="${HDD}1"
	SWAPHDD="${HDD}2"
	ROOTHDD="${HDD}3"

	## hdds partitionieren manuell
	cfdisk $HDD || die
}

setup_hdd_partitions_silent() {
	## hdds löschen
	dd if=/dev/zero of=$HDD bs=1024k count=1 || die
	## hdds partitionieren silent
	fdisk $HDD < $CONFIGS_TEMPLATE/fdisksettings #1> /dev/null 3> /dev/null || die
	
	read
}

setup_hdd_format() {
	mkswap $SWAPHDD || die
	mke2fs -j -q $BOOTHDD || die
	mke2fs -j -q $ROOTHDD || die
}

install_mount_rootfs() {
	swapon $SWAPHDD || die
	mount $ROOTHDD $INSTALLPATH || die
	install -d $INSTALLPATH/boot || die
	mount $BOOTHDD $INSTALLPATH/boot || die
	cd $INSTALLPATH || die
}

install_system_image() {
	#tar xvzpf $CDPATH/system/autosta_lx.tar.gz
	tar xvjpf ${CDPATH}/system/${CDIMAGENAME} -C ${INSTALLPATH}
}


install_kernel_image() {
	declare -i CPUTYPE=`cat /proc/cpuinfo |grep "cpu family"|cut -d ' ' -f3`

	if [ $CPUTYPE -le 5 ];then
                #echo -e "\033[1;6m\033[36m""i386 Architektur gefunden.""\033[0m"
                #echo -e "Installiere i386 Kernel..."

		lastdir="`pwd`"

		mkdir -p $INSTALLPATH/INSTALL/kernel || die
		cd $INSTALLPATH/INSTALL/kernel || die
		tar xzpf $CDPATH/kernels/kernel-i386.tar.gz || die
		source $INSTALLPATH/INSTALL/kernel/kernelversion || die

		cp -aRf $INSTALLPATH/INSTALL/kernel/$KRNLIB $INSTALLPATH/lib/modules || die
		cp -aRf $INSTALLPATH/INSTALL/kernel/$KRNIMG $INSTALLPATH/boot || die
		cp -aRf $INSTALLPATH/INSTALL/kernel/$KRNINITRD $INSTALLPATH/boot || die
		cp -aRf $INSTALLPATH/INSTALL/kernel/kernelversion $INSTALLPATH/boot || die

		cd $lastdir || die

        elif [ $CPUTYPE -ge 6 ];then
                #echo -e "\033[1;6m\033[36m""i686 Architektur gefunden.""\033[0m"
                #echo -e "Installiere i686 Kernel..."

		lastdir="`pwd`"

		mkdir -p $INSTALLPATH/INSTALL/kernel || die
		cd $INSTALLPATH/INSTALL/kernel || die
		tar xzpf $CDPATH/kernels/kernel-i686.tar.gz || die
		source $INSTALLPATH/INSTALL/kernel/kernelversion || die

		cp -aRf $INSTALLPATH/INSTALL/kernel/$KRNLIB $INSTALLPATH/lib/modules || die
		cp -aRf $INSTALLPATH/INSTALL/kernel/$KRNIMG $INSTALLPATH/boot || die
		cp -aRf $INSTALLPATH/INSTALL/kernel/$KRNINITRD $INSTALLPATH/boot || die
		cp -aRf $INSTALLPATH/INSTALL/kernel/kernelversion $INSTALLPATH/boot || die

		cd $lastdir || die
        fi
}

install_bootsector() {
	### grubconf schreiben
	source $INSTALLPATH/INSTALL/kernel/kernelversion

	if [ -z $KRNVER ]
	then
		KRNVER="AutoSta_LX"
	fi

	if [ -z $KRNIMG ]
	then
		KRNIMG="bzImage"
	fi

	if [ -z $KRNINITRD ]
	then
		KRNINITRD="initrd"
	fi

	echo -e "default 0" > $INSTALLPATH/boot/grub/grub.conf || die
	echo -e "timeout 03" >> $INSTALLPATH/boot/grub/grub.conf ||die
	#no support for splash image in 6.1-r2
	#echo -e "splashimage=(hd0,0)/boot/grub/splash.xpm.gz" >> $INSTALLPATH/boot/grub/grub.conf || die
	echo -e "\ntitle=${KRNVER}" >> $INSTALLPATH/boot/grub/grub.conf || die
	echo -e "root (hd0,0)" >> $INSTALLPATH/boot/grub/grub.conf || die
	
	#s3 cards don't support this
	#echo -e "kernel (hd0,0)/boot/${KRNIMG} root=$ROOTHDD vga=0x317 video:vesa:ywrap,mtrr splash=silent quiet" >> $INSTALLPATH/boot/grub/grub.conf || die
	#that's more safer:
	echo -e "kernel (hd0,0)/boot/${KRNIMG} root=$ROOTHDD quiet" >> $INSTALLPATH/boot/grub/grub.conf || die
	
	#not needed without bootsplash support
	#echo -e "initrd=/boot/${KRNINITRD}" >> $INSTALLPATH/boot/grub/grub.conf || die

	### bootsector schreiben
	#grub --no-floppy < $CONFIGS_TEMPLATE/grubsettings || die
	/sbin/grub --no-floppy --batch << "EOF" 1> /dev/null 2> /dev/null || die
root (hd0,0)
setup (hd0)
quit
EOF
}

install_bootsector_chroot() {
	### grubconf schreiben
	#source $INSTALLPATH/INSTALL/kernel/kernelversion
	source $INSTALLPATH/boot/kernelversion

	#for alx only
	if [ -e ${INSTALLPATH}/etc/alx_version ]
	then
		OLD_ALXVER="${ALXVER}"
		source ${INSTALLPATH}/etc/alx_version
		KRNVER="ALX-${ALXVER}"
		ALXVER="${OLD_ALXVER}"
	fi
	
	if [ -z "$KRNVER" ]
	then
		KRNVER="AutoSta_LX"
	fi

	if [ -z "$KRNIMG" ]
	then
		KRNIMG="bzImage"
	fi

	if [ -z "$KRNINITRD" ]
	then
		KRNINITRD="initrd"
	fi

	echo -e "default 0" > $INSTALLPATH/boot/grub/grub.conf || die
	echo -e "timeout 0" >> $INSTALLPATH/boot/grub/grub.conf ||die
	
	#no support for splash image in 6.1-r2
	#echo -e "splashimage=(hd0,0)/boot/grub/splash.xpm.gz" >> $INSTALLPATH/boot/grub/grub.conf || die
	
	echo -e "\ntitle=${KRNVER}" >> $INSTALLPATH/boot/grub/grub.conf || die
	echo -e "root (hd0,0)" >> $INSTALLPATH/boot/grub/grub.conf || die
	
	#s3 cards don't support this
	#echo -e "kernel (hd0,0)/boot/${KRNIMG} root=$ROOTHDD vga=0x317 video:vesa:ywrap,mtrr splash=silent quiet" >> $INSTALLPATH/boot/grub/grub.conf || die
	#that's more safer:
	echo -e "kernel (hd0,0)/boot/${KRNIMG} root=$ROOTHDD quiet" >> $INSTALLPATH/boot/grub/grub.conf || die
	
	#not needed without bootsplash support
	#echo -e "initrd=/boot/${KRNINITRD}" >> $INSTALLPATH/boot/grub/grub.conf || die


	### bootsector schreiben chrooted schreiben (gentoo)
	if [ -f $INSTALLPATH/sbin/grub ]
	then
		cat > $INSTALLPATH/root/.bashrc << CHROOTEOF
/sbin/grub --no-floppy --batch << "EOF" 1> /dev/null 2> /dev/null
root (hd0,0)
setup (hd0)
quit
EOF
exit 0
CHROOTEOF
	fi

	### bootsector schreiben chrooted schreiben (lfs/magellan)
	if [ -f $INSTALLPATH/usr/sbin/grub ]
	then
		cat > $INSTALLPATH/root/.bashrc << CHROOTEOF
/usr/sbin/grub --no-floppy --batch << "EOF" 1> /dev/null 2> /dev/null
root (hd0,0)
setup (hd0)
quit
EOF
exit 0
CHROOTEOF
	fi

	##enters chroot
	mount -t proc none $INSTALLPATH/proc
	# bind /dev to get the devices right,
	# if bootet from a 2.6 kernel with udev
	mount -o bind /dev $INSTALLPATH/dev
	chroot $INSTALLPATH /bin/bash --rcfile /root/.bashrc -i
	umount $INSTALLPATH/proc
	umount $INSTALLPATH/dev
	rm $INSTALLPATH/root/.bashrc
}

install_alxconfig(){
	lastdir="`pwd`"

	mkdir -p $INSTALLPATH/opt/alx-config || die
	cd $INSTALLPATH/opt/alx-config || die
	tar xzpf $CDPATH/alx-config/alx-config.tar.gz || die
	chmod a+x $INSTALLPATH/opt/alx-config/Configurator/config_functions.sh || die
	chmod a+x $INSTALLPATH/opt/alx-config/Configurator/config_menu.sh || die
	ln -sf /opt/alx-config/Configurator/config_menu.sh $INSTALLPATH/bin/ALXConfig || die

	cd $lastdir || die
}


install_system_settings(){
	### schreibe fstab
	echo -e "$BOOTHDD\t/boot\text3\tnoatime,noauto\t1 1" > $INSTALLPATH/etc/fstab || die
	echo -e "$ROOTHDD\t/\text3\tnoatime\t0 0" >> $INSTALLPATH/etc/fstab || die
	echo -e "$SWAPHDD\tswap\tswap\tpri=1\t0 0" >> $INSTALLPATH/etc/fstab || die
	echo -e "none\t/proc\tproc\tdefaults\t0 0" >> $INSTALLPATH/etc/fstab || die
	
	#deprecated
	#echo -e "devpts\t/dev/pts\tdevpts\tgid=4,mode=620\t0 0" >> $INSTALLPATH/etc/fstab || die

	echo -e "none\t/dev/shm\ttmpfs\tdefaults\t0 0" >> $INSTALLPATH/etc/fstab || die
	echo -e "none\t/proc/bus/usb\tusbfs\tdefaults\t0 0" >> $INSTALLPATH/etc/fstab || die
}

install_hotfixes(){
	if [ -f $CDPATH/hotfixes/hotfixes.sh ]
	then
		dialog_hotfixes
		sleep1
		$CDPATH/hotfixes/hotfixes.sh
	fi
}

install_umount_rootfs() {
	cd /
	umount $INSTALLPATH/boot || die
	umount $INSTALLPATH || die
	swapoff $SWAPHDD || die
}

install_do_reboot() {

	#only for now later it will be used again
	#with 6.1-r2 these options are not available
	#cd /
	#umount $CDPATH
	#eject
	#clear
	
	reboot
}

#################################################
#	     Install Ablauf Scripte		#
#################################################

run_install_normal() {
	#only for now later it will be used again
	#with 6.1-r2 only one install method available
	#dialog_setup_hdd_menu
	dialog_setup_hdd_found_manuell
	
	dialog_setup_hdd_partitions_manuell
	dialog_setup_hdd_format
	setup_hdd_format > /dev/null
	install_mount_rootfs
	(install_system_image > /tmp/install.log) 2> /tmp/install_errors.log | dialog_install_meter | dialog_install_system_image
	
	#only for now later it will be used again
	#with 6.1-r2 variable kernels are not available
	#dialog_install_kernel_image
	#install_kernel_image
	
	dialog_install_bootsector
	install_bootsector_chroot
	
	#only for now later it will be used again
	#with 6.1-r2 highest version of alx-config is already included
	#dialog_install_alxconfig
	#sleep 1
	#install_alxconfig
	
	dialog_install_settings
	sleep 1
	install_system_settings
	install_hotfixes
	install_umount_rootfs
	dialog_install_successful
}

run_install_silent() {
	echo "starting silent install ..."
	sleep 1
}

run_install_unattended() {
	echo "starting unattended install ..."
	sleep 1
}

if [ "$1" == "unattended" ]
then
	run_install_unattended
else
	dialog_main
fi

exit 0
1	niro	258	#!/bin/sh
2			#
3	niro	268	# $Header: /home/cvsd/alx-cvs/alx-src/alxinstall-ng/bin/alxinstall-ng.sh,v 1.4 2005-04-19 17:24:57 niro Exp $
4	niro	258	#
5			# AutoSta_LX Installation Script
6			# version: 0.8b
7			#
8			# Niels Rogalla <niro@magellan-linux.de>
9			# <rogalla@augusta-bochum.de>
10			#
11			#
12			# Install Navigation Gui
13			#
14
15			#source /etc/alx_version
16			#source /opt/alx-config/version
17
18			#source /etc/alx-config/config.rc
19
20			#images: (get ${CDIMAGENAME})
21			source /mnt/cdrom/system/images.conf
22
23			#Includes
24			source /usr/lib/alxinstall-ng/functions/findhdd.sh > /dev/null
25			### bugfix ###############################
26			cdromdev="`echo $cdromdev\|sed -e 's/ //'`"
27			########################################
28
29			### System/Config Version
30			VERSION="0.1"
31			TITLE="alxinstall-ng - ${VERSION}"
32
33			#CONFIGS_TEMPLATE="/opt/alx-config/configs"
34
35			CDPATH="/mnt/cdrom"
36			INSTALLPATH="/mnt/magellan"
37
38			### WICHTIG: anzahl lines in der autosta_lx.tar.gz -1
39			CURRENTLINE=0
40			#TOTALLINES=11072 # -> now in images.conf
41
42
43			#################################################
44			# DIALOG BOXEN #
45			#################################################
46
47			die() {
48			#clear
49			#echo -e "\nhuch, da ist ein script gestorben -> $?\n"
50			#read
51			#exit 0
52			ERROR=$1
53			RETVAL=$?
54			dialog_install_failure
55			exit 1
56			}
57
58			dialog_warning() {
59			dialog \
60			--backtitle "$TITLE" \
61			--colors \
62			--defaultno \
63			--yesno "\Z1 !!! Achtung !!! \Zn\n\n\
64			Diese Festplatte wird unwiederruflich geloescht werden.\n\n\
65			Soll ich wirklich fortfahren ?" 10 70
66			RES=$?
67			if [ "$RES" == "1" ]
68			then
69			clear
70			echo "Der Vorgang wurde abgebrochen."
71			exit 1
72			fi
73			}
74
75			dialog_setup_hdd_info(){
76			local SHDD="`echo $HDD\|sed -e 's/\/dev\///'`"
77
78			dialog \
79			--colors \
80			--title "[ Festplatten Partitionierung ]" \
81			--backtitle "$TITLE" \
82			--ok-label "Weiter" \
83			--msgbox "\nBitte legen Sie 3 Partitionen an.\n\n\
84			[ \Z3${SHDD}1\Zn ] Typ: \Z3Linux\Zn mit ca. 50MB\n\
85			[ \Z3${SHDD}2\Zn ] Typ: \Z3Linux Swap\Zn mit ca. 256MB\n\
86			[ \Z3${SHDD}3\Zn ] Typ: \Z3Linux \Zn mit dem Rest (min. 256MB)\n\n\
87			Bitte ${SHDD}1 als \Z3bootable\Zn markieren." 12 81
88			}
89
90			dialog_setup_hdd_menu() {
91
92			I=`dialog \
93			--backtitle "$TITLE" \
94			--title "[ Festplatten Partitionierung ]" \
95			--cancel-label "Abbrechen" \
96			--ok-label "Weiter" \
97			--stdout \
98			--menu "\nWaehlen Sie zwischen Manuell und Automatisch" 14 70 5 \
99			"1" "Manuell" \
100			"2" "Automatisch"`
101			RES=$?
102			if [ "$RES" == "1" ];then
103			return 1
104			fi
105			if [ "$RES" == "0" ];then
106			case "$I" in
107			"1")
108			dialog_setup_hdd_found_manuell
109			;;
110			"2")
111			dialog_warning
112			setup_hdd_partitions_silent
113			;;
114			esac
115			fi
116			}
117
118			dialog_setup_hdd_found_manuell() {
119			if [ ! -z "$installdevs" ]
120			then
121			installdevs=""
122			fi
123
124			echo "dialog \\" > /tmp/hddtmp.sh
125			echo "--backtitle \"$TITLE\" \\" >> /tmp/hddtmp.sh
126			echo "--ok-label \"Weiter\" \\" >> /tmp/hddtmp.sh
127			echo "--stdout \\" >> /tmp/hddtmp.sh
128			echo "--colors \\" >> /tmp/hddtmp.sh
129			echo "--msgbox \"Gefundene Hardware:\n\n \\" >> /tmp/hddtmp.sh
130			echo " Festplatten:\n \\" >> /tmp/hddtmp.sh
131
132			if [ ! -z "$scsidisks" ]
133			then
134			for I in $scsidisks
135			do
136			if [ "$I" != "$cdromdev" ]
137			then
138			echo " \\Z7SCSI: \\Z3$I\\Zn\n \\" >> /tmp/hddtmp.sh
139			installdevs="$installdevs $I"
140			fi
141			done
142			fi
143
144			if [ ! -z "$idedisks" ]
145			then
146			for I in $idedisks
147			do
148			if [ "$I" != "$cdromdev" ]
149			then
150			echo " \\Z7IDE: \\Z3$I\\Zn\n \\" >> /tmp/hddtmp.sh
151			installdevs="$installdevs $I"
152			fi
153			done
154			fi
155
156			if [ ! -z "$cdromdev" ]
157			then
158			echo " \n \\" >> /tmp/hddtmp.sh
159			echo " \\Z7andere Laufwerke:\n \\" >> /tmp/hddtmp.sh
160			echo " CDROM: \\Z3$cdromdev\\Zn\n \\" >> /tmp/hddtmp.sh
161			fi
162			echo " \" 13 70" >> /tmp/hddtmp.sh
163			chmod a+x /tmp/hddtmp.sh
164			/tmp/hddtmp.sh
165			}
166
167			dialog_setup_hdd_partitions_manuell() {
168			if [ -z "$installdevs" ]
169			then
170			dialog \
171			--backtitle "$TITLE" \
172			--ok-label "Beenden" \
173			--msgbox "Kein geeignetes Laufwerk gefunden.\nDie Installation ist fehlgeschlagen." 6 70
174			exit 1
175			else
176
177			echo "dialog \\" > /tmp/hddtmp.sh
178			echo "--backtitle \"$TITLE\" \\" >> /tmp/hddtmp.sh
179			echo "--ok-label \"Weiter\" \\" >> /tmp/hddtmp.sh
180			echo "--cancel-label \"Beenden\" \\" >> /tmp/hddtmp.sh
181			echo "--stdout \\" >> /tmp/hddtmp.sh
182			echo "--menu \"Installations Laufwerk auswaehlen:\" 10 70 3 \\" >> /tmp/hddtmp.sh
183
184			for I in $installdevs
185			do
186			echo "\"$I\" \"\" \\" >> /tmp/hddtmp.sh
187			done
188			echo -e "\n" >> /tmp/hddtmp.sh
189
190			chmod a+x /tmp/hddtmp.sh
191			HDD="`/tmp/hddtmp.sh`"
192			RES=$?
193			if [ "$RES" == "1" ]
194			then
195			return 1
196			fi
197			if [ "$RES" == "0" ]
198			then
199			dialog_setup_hdd_info
200			setup_hdd_partitions_manuell
201			fi
202			fi
203			}
204
205			dialog_setup_hdd_partitions_silent() {
206			dialog \
207			--backtitle "$TITLE" \
208			--infobox "Erstelle Partitionen ..." 3 70
209			}
210
211			dialog_setup_hdd_format() {
212			dialog \
213			--backtitle "$TITLE" \
214			--infobox "Erstelle Datei-Systeme ..." 3 70
215			}
216
217			dialog_install_settings() {
218			dialog \
219			--backtitle "$TITLE" \
220			--infobox "Speichere System-Einstellungen ..." 3 70
221			}
222
223			dialog_install_system_image() {
224			dialog \
225			--backtitle "$TITLE" \
226			--gauge "Kopiere System-Image ..." 6 80
227			}
228
229			dialog_install_meter() {
230			while [ "${CURRENTLINE}" != "${TOTALLINES}" ] ; do
231			CURRENTLINE=`grep --count . /tmp/install.log`
232			PERCENT=`expr ${CURRENTLINE} \* 100 / ${TOTALLINES}`
233			echo ${PERCENT}
234			sleep 1
235			done
236			rm -f /tmp/install.log
237			return 0
238			}
239
240
241			dialog_install_bootsector() {
242			dialog \
243			--backtitle "$TITLE" \
244			--infobox "Schreibe den Bootsektor ..." 3 70
245			}
246
247			dialog_install_alxconfig() {
248			dialog \
249			--backtitle "$TITLE" \
250			--infobox "Installiere die ALX Setup-Tools ..." 3 70
251			}
252
253			dialog_install_kernel_image() {
254			dialog \
255			--backtitle "$TITLE" \
256			--infobox "Installiere den System-Kernel ..." 3 70
257
258			}
259
260			dialog_install_hotfixes() {
261			dialog \
262			--backtitle "$TITLE" \
263			--infobox "Installiere Hotfixes ..." 3 70
264
265			}
266
267			dialog_install_successful() {
268			dialog \
269			--backtitle "$TITLE" \
270			--colors \
271			--msgbox "Die Installation war \Z2erfolgreich\Zn." 5 81
272			}
273
274			dialog_install_failure() {
275			dialog \
276			--backtitle "$TITLE" \
277			--colors \
278			--msgbox "Die Installation ist \Z1Fehlgeschlagen\Zn.\n\n\
279			Fehler bei $ERROR, RetVal: $RETVAL \
280			" 10 81
281			}
282
283			dialog_install_method() {
284
285			METHOD=`dialog \
286			--backtitle "$TITLE" \
287			--cancel-label "Abbrechen" \
288			--ok-label "Weiter" \
289			--stdout \
290			--menu "Konfiguration" 14 70 5 \
291			"1" "Normale Installation" \
292			"2" "Silent Installation"`
293			RES=$?
294			if [ "$RES" == "1" ];then
295			return 1
296			fi
297			if [ "$RES" == "0" ];then
298			case "$METHOD" in
299			"1")
300			run_install_normal
301			;;
302			"2")
303			dialog_warning
304			run_install_silent
305			;;
306			esac
307			fi
308			}
309
310			dialog_main() {
311			METHOD=0
312
313			while [ $METHOD -le 2 ]
314			do
315			METHOD=`dialog \
316			--backtitle "$TITLE" \
317			--no-cancel \
318			--ok-label "Weiter" \
319			--stdout \
320			--menu "Konfiguration" 14 70 5 \
321			"1" "AutoSta_LX installieren" \
322			"2" "Uebersicht gefundener Laufwerke" \
323			"3" "Beenden und neustarten" \
324	niro	260	"4" "Beenden und eine Shell starten" `
325	niro	258	RES=$?
326			if [ "$RES" == "1" ];then
327			exit 1
328			fi
329			if [ "$RES" == "0" ];then
330			case "$METHOD" in
331			"1")
332			#only for now later it will be used again
333			#with 6.1-r2 only one install method available
334			#dialog_install_method
335			run_install_normal
336			;;
337			"2") dialog_setup_hdd_found_manuell
338			;;
339			"3") install_do_reboot
340			;;
341	niro	260	"4") /bin/bash --login -i
342			;;
343	niro	258	esac
344			fi
345			done
346			}
347
348			#################################################
349			# Install Komandos #
350			#################################################
351			setup_hdd_partitions_manuell() {
352			BOOTHDD="${HDD}1"
353			SWAPHDD="${HDD}2"
354			ROOTHDD="${HDD}3"
355
356			## hdds partitionieren manuell
357			cfdisk $HDD \|\| die
358			}
359
360			setup_hdd_partitions_silent() {
361			## hdds löschen
362			dd if=/dev/zero of=$HDD bs=1024k count=1 \|\| die
363			## hdds partitionieren silent
364			fdisk $HDD < $CONFIGS_TEMPLATE/fdisksettings #1> /dev/null 3> /dev/null \|\| die
365
366			read
367			}
368
369			setup_hdd_format() {
370			mkswap $SWAPHDD \|\| die
371			mke2fs -j -q $BOOTHDD \|\| die
372			mke2fs -j -q $ROOTHDD \|\| die
373			}
374
375			install_mount_rootfs() {
376			swapon $SWAPHDD \|\| die
377			mount $ROOTHDD $INSTALLPATH \|\| die
378			install -d $INSTALLPATH/boot \|\| die
379			mount $BOOTHDD $INSTALLPATH/boot \|\| die
380			cd $INSTALLPATH \|\| die
381			}
382
383			install_system_image() {
384			#tar xvzpf $CDPATH/system/autosta_lx.tar.gz
385			tar xvjpf ${CDPATH}/system/${CDIMAGENAME} -C ${INSTALLPATH}
386			}
387
388
389			install_kernel_image() {
390			declare -i CPUTYPE=`cat /proc/cpuinfo \|grep "cpu family"\|cut -d ' ' -f3`
391
392			if [ $CPUTYPE -le 5 ];then
393			#echo -e "\033[1;6m\033[36m""i386 Architektur gefunden.""\033[0m"
394			#echo -e "Installiere i386 Kernel..."
395
396			lastdir="`pwd`"
397
398			mkdir -p $INSTALLPATH/INSTALL/kernel \|\| die
399			cd $INSTALLPATH/INSTALL/kernel \|\| die
400			tar xzpf $CDPATH/kernels/kernel-i386.tar.gz \|\| die
401			source $INSTALLPATH/INSTALL/kernel/kernelversion \|\| die
402
403			cp -aRf $INSTALLPATH/INSTALL/kernel/$KRNLIB $INSTALLPATH/lib/modules \|\| die
404			cp -aRf $INSTALLPATH/INSTALL/kernel/$KRNIMG $INSTALLPATH/boot \|\| die
405			cp -aRf $INSTALLPATH/INSTALL/kernel/$KRNINITRD $INSTALLPATH/boot \|\| die
406			cp -aRf $INSTALLPATH/INSTALL/kernel/kernelversion $INSTALLPATH/boot \|\| die
407
408			cd $lastdir \|\| die
409
410			elif [ $CPUTYPE -ge 6 ];then
411			#echo -e "\033[1;6m\033[36m""i686 Architektur gefunden.""\033[0m"
412			#echo -e "Installiere i686 Kernel..."
413
414			lastdir="`pwd`"
415
416			mkdir -p $INSTALLPATH/INSTALL/kernel \|\| die
417			cd $INSTALLPATH/INSTALL/kernel \|\| die
418			tar xzpf $CDPATH/kernels/kernel-i686.tar.gz \|\| die
419			source $INSTALLPATH/INSTALL/kernel/kernelversion \|\| die
420
421			cp -aRf $INSTALLPATH/INSTALL/kernel/$KRNLIB $INSTALLPATH/lib/modules \|\| die
422			cp -aRf $INSTALLPATH/INSTALL/kernel/$KRNIMG $INSTALLPATH/boot \|\| die
423			cp -aRf $INSTALLPATH/INSTALL/kernel/$KRNINITRD $INSTALLPATH/boot \|\| die
424			cp -aRf $INSTALLPATH/INSTALL/kernel/kernelversion $INSTALLPATH/boot \|\| die
425
426			cd $lastdir \|\| die
427			fi
428			}
429
430			install_bootsector() {
431			### grubconf schreiben
432			source $INSTALLPATH/INSTALL/kernel/kernelversion
433
434			if [ -z $KRNVER ]
435			then
436			KRNVER="AutoSta_LX"
437			fi
438
439			if [ -z $KRNIMG ]
440			then
441			KRNIMG="bzImage"
442			fi
443
444			if [ -z $KRNINITRD ]
445			then
446			KRNINITRD="initrd"
447			fi
448
449			echo -e "default 0" > $INSTALLPATH/boot/grub/grub.conf \|\| die
450			echo -e "timeout 03" >> $INSTALLPATH/boot/grub/grub.conf \|\|die
451			#no support for splash image in 6.1-r2
452			#echo -e "splashimage=(hd0,0)/boot/grub/splash.xpm.gz" >> $INSTALLPATH/boot/grub/grub.conf \|\| die
453			echo -e "\ntitle=${KRNVER}" >> $INSTALLPATH/boot/grub/grub.conf \|\| die
454			echo -e "root (hd0,0)" >> $INSTALLPATH/boot/grub/grub.conf \|\| die
455
456			#s3 cards don't support this
457			#echo -e "kernel (hd0,0)/boot/${KRNIMG} root=$ROOTHDD vga=0x317 video:vesa:ywrap,mtrr splash=silent quiet" >> $INSTALLPATH/boot/grub/grub.conf \|\| die
458			#that's more safer:
459			echo -e "kernel (hd0,0)/boot/${KRNIMG} root=$ROOTHDD quiet" >> $INSTALLPATH/boot/grub/grub.conf \|\| die
460
461			#not needed without bootsplash support
462			#echo -e "initrd=/boot/${KRNINITRD}" >> $INSTALLPATH/boot/grub/grub.conf \|\| die
463
464			### bootsector schreiben
465			#grub --no-floppy < $CONFIGS_TEMPLATE/grubsettings \|\| die
466			/sbin/grub --no-floppy --batch << "EOF" 1> /dev/null 2> /dev/null \|\| die
467			root (hd0,0)
468			setup (hd0)
469			quit
470			EOF
471			}
472
473			install_bootsector_chroot() {
474			### grubconf schreiben
475			#source $INSTALLPATH/INSTALL/kernel/kernelversion
476			source $INSTALLPATH/boot/kernelversion
477
478			#for alx only
479			if [ -e ${INSTALLPATH}/etc/alx_version ]
480			then
481			OLD_ALXVER="${ALXVER}"
482			source ${INSTALLPATH}/etc/alx_version
483			KRNVER="ALX-${ALXVER}"
484			ALXVER="${OLD_ALXVER}"
485			fi
486
487			if [ -z "$KRNVER" ]
488			then
489			KRNVER="AutoSta_LX"
490			fi
491
492			if [ -z "$KRNIMG" ]
493			then
494			KRNIMG="bzImage"
495			fi
496
497			if [ -z "$KRNINITRD" ]
498			then
499			KRNINITRD="initrd"
500			fi
501
502			echo -e "default 0" > $INSTALLPATH/boot/grub/grub.conf \|\| die
503	niro	268	echo -e "timeout 0" >> $INSTALLPATH/boot/grub/grub.conf \|\|die
504	niro	258
505			#no support for splash image in 6.1-r2
506			#echo -e "splashimage=(hd0,0)/boot/grub/splash.xpm.gz" >> $INSTALLPATH/boot/grub/grub.conf \|\| die
507
508			echo -e "\ntitle=${KRNVER}" >> $INSTALLPATH/boot/grub/grub.conf \|\| die
509			echo -e "root (hd0,0)" >> $INSTALLPATH/boot/grub/grub.conf \|\| die
510
511			#s3 cards don't support this
512			#echo -e "kernel (hd0,0)/boot/${KRNIMG} root=$ROOTHDD vga=0x317 video:vesa:ywrap,mtrr splash=silent quiet" >> $INSTALLPATH/boot/grub/grub.conf \|\| die
513			#that's more safer:
514			echo -e "kernel (hd0,0)/boot/${KRNIMG} root=$ROOTHDD quiet" >> $INSTALLPATH/boot/grub/grub.conf \|\| die
515
516			#not needed without bootsplash support
517			#echo -e "initrd=/boot/${KRNINITRD}" >> $INSTALLPATH/boot/grub/grub.conf \|\| die
518
519
520			### bootsector schreiben chrooted schreiben (gentoo)
521			if [ -f $INSTALLPATH/sbin/grub ]
522			then
523			cat > $INSTALLPATH/root/.bashrc << CHROOTEOF
524			/sbin/grub --no-floppy --batch << "EOF" 1> /dev/null 2> /dev/null
525			root (hd0,0)
526			setup (hd0)
527			quit
528			EOF
529	niro	260	exit 0
530	niro	258	CHROOTEOF
531			fi
532
533			### bootsector schreiben chrooted schreiben (lfs/magellan)
534			if [ -f $INSTALLPATH/usr/sbin/grub ]
535			then
536			cat > $INSTALLPATH/root/.bashrc << CHROOTEOF
537			/usr/sbin/grub --no-floppy --batch << "EOF" 1> /dev/null 2> /dev/null
538			root (hd0,0)
539			setup (hd0)
540			quit
541			EOF
542	niro	260	exit 0
543	niro	258	CHROOTEOF
544			fi
545
546			##enters chroot
547	niro	261	mount -t proc none $INSTALLPATH/proc
548			# bind /dev to get the devices right,
549			# if bootet from a 2.6 kernel with udev
550			mount -o bind /dev $INSTALLPATH/dev
551	niro	260	chroot $INSTALLPATH /bin/bash --rcfile /root/.bashrc -i
552	niro	258	umount $INSTALLPATH/proc
553	niro	261	umount $INSTALLPATH/dev
554	niro	258	rm $INSTALLPATH/root/.bashrc
555			}
556
557			install_alxconfig(){
558			lastdir="`pwd`"
559
560			mkdir -p $INSTALLPATH/opt/alx-config \|\| die
561			cd $INSTALLPATH/opt/alx-config \|\| die
562			tar xzpf $CDPATH/alx-config/alx-config.tar.gz \|\| die
563			chmod a+x $INSTALLPATH/opt/alx-config/Configurator/config_functions.sh \|\| die
564			chmod a+x $INSTALLPATH/opt/alx-config/Configurator/config_menu.sh \|\| die
565			ln -sf /opt/alx-config/Configurator/config_menu.sh $INSTALLPATH/bin/ALXConfig \|\| die
566
567			cd $lastdir \|\| die
568			}
569
570
571			install_system_settings(){
572			### schreibe fstab
573	niro	268	echo -e "$BOOTHDD\t/boot\text3\tnoatime,noauto\t1 1" > $INSTALLPATH/etc/fstab \|\| die
574	niro	258	echo -e "$ROOTHDD\t/\text3\tnoatime\t0 0" >> $INSTALLPATH/etc/fstab \|\| die
575			echo -e "$SWAPHDD\tswap\tswap\tpri=1\t0 0" >> $INSTALLPATH/etc/fstab \|\| die
576			echo -e "none\t/proc\tproc\tdefaults\t0 0" >> $INSTALLPATH/etc/fstab \|\| die
577
578			#deprecated
579			#echo -e "devpts\t/dev/pts\tdevpts\tgid=4,mode=620\t0 0" >> $INSTALLPATH/etc/fstab \|\| die
580
581			echo -e "none\t/dev/shm\ttmpfs\tdefaults\t0 0" >> $INSTALLPATH/etc/fstab \|\| die
582			echo -e "none\t/proc/bus/usb\tusbfs\tdefaults\t0 0" >> $INSTALLPATH/etc/fstab \|\| die
583			}
584
585			install_hotfixes(){
586			if [ -f $CDPATH/hotfixes/hotfixes.sh ]
587			then
588			dialog_hotfixes
589			sleep1
590			$CDPATH/hotfixes/hotfixes.sh
591			fi
592			}
593
594			install_umount_rootfs() {
595			cd /
596			umount $INSTALLPATH/boot \|\| die
597			umount $INSTALLPATH \|\| die
598			swapoff $SWAPHDD \|\| die
599			}
600
601			install_do_reboot() {
602
603			#only for now later it will be used again
604			#with 6.1-r2 these options are not available
605			#cd /
606			#umount $CDPATH
607			#eject
608			#clear
609
610			reboot
611			}
612
613			#################################################
614			# Install Ablauf Scripte #
615			#################################################
616
617			run_install_normal() {
618			#only for now later it will be used again
619			#with 6.1-r2 only one install method available
620			#dialog_setup_hdd_menu
621			dialog_setup_hdd_found_manuell
622
623			dialog_setup_hdd_partitions_manuell
624			dialog_setup_hdd_format
625			setup_hdd_format > /dev/null
626			install_mount_rootfs
627			(install_system_image > /tmp/install.log) 2> /tmp/install_errors.log \| dialog_install_meter \| dialog_install_system_image
628
629			#only for now later it will be used again
630			#with 6.1-r2 variable kernels are not available
631			#dialog_install_kernel_image
632			#install_kernel_image
633
634			dialog_install_bootsector
635			install_bootsector_chroot
636
637			#only for now later it will be used again
638			#with 6.1-r2 highest version of alx-config is already included
639			#dialog_install_alxconfig
640			#sleep 1
641			#install_alxconfig
642
643			dialog_install_settings
644			sleep 1
645			install_system_settings
646			install_hotfixes
647			install_umount_rootfs
648			dialog_install_successful
649			}
650
651			run_install_silent() {
652			echo "starting silent install ..."
653			sleep 1
654			}
655
656			run_install_unattended() {
657			echo "starting unattended install ..."
658			sleep 1
659			}
660
661			if [ "$1" == "unattended" ]
662			then
663			run_install_unattended
664			else
665			dialog_main
666			fi
667
668			exit 0