alxinstall-ng/bin/alxinstall-ng.sh.in

#!/bin/sh
#
# $Header: /home/cvsd/alx-cvs/alx-src/alxinstall-ng/bin/alxinstall-ng.sh,v 1.15 2008-06-28 00:37:45 niro Exp $
#
# AutoSta_LX Installation Script
#
# Niels Rogalla <niro@magellan-linux.de>
#		<rogalla@augusta-bochum.de>
#
#
# Install Navigation Gui
#

#images: (get ${CDIMAGENAME})
source /mnt/cdrom/system/images.conf

#Includes
source /usr/lib/alxinstall-ng/functions/findhdd.sh > /dev/null
### bugfix ###############################
cdromdev="$(echo ${cdromdev} | sed 's/ //')"
########################################

### System/Config Version
VERSION="%VERSIONTAG%"
TITLE="alxinstall-ng - ${VERSION}"

CDPATH="/mnt/cdrom"
INSTALLPATH="/mnt/magellan"

### WICHTIG: anzahl lines in der autosta_lx.tar.gz -1
CURRENTLINE=0
#TOTALLINES=11072 # -> now in images.conf

# standard kernel opts
KERNELOPTS="quiet video=1024x768"

# grub options
GRUBLEGACYOPTS=""
GRUB2OPTS=""

# fdisk options
FDISKPARTIONBELOW256MB=0

# default specialdevices
SPECIALDEVICE=""

# target filesystem
FORMAT_FILESYSTEM="ext4"

#################################################
#		  DIALOG BOXEN			#
#################################################

die()
{
	ERROR=$1
	RETVAL=$?
	dialog_install_failure
	exit 1
}

dialog_warning()
{
	dialog \
	--backtitle "${TITLE}" \
	--colors \
	--defaultno \
	--yesno "\Z1 !!! Achtung !!! \Zn\n\n\
	Diese Festplatte wird unwiederruflich geloescht werden.\n\n\
		Soll ich wirklich fortfahren ?" 10 70
	RES=$?
	if [[ ${RES} -eq 1 ]]
	then
		clear
		echo "Der Vorgang wurde abgebrochen."
		exit 1
	fi
}

dialog_setup_hdd_info()
{
	local SHDD="$(echo ${HDD} | sed 's/\/dev\///')"

	dialog \
	--colors \
	--title "[ Festplatten Partitionierung ]" \
	--backtitle "${TITLE}" \
	--ok-label "Weiter" \
	--msgbox "\nBitte legen Sie 3 Partitionen an.\n\n\
		[ \Z3${SHDD}1\Zn ] Typ: \Z3Linux\Zn mit ca. 50MB\n\
		[ \Z3${SHDD}2\Zn ] Typ: \Z3Linux Swap\Zn mit ca. 256MB\n\
		[ \Z3${SHDD}3\Zn ] Typ: \Z3Linux \Zn mit dem Rest (min. 256MB)\n\n\
		Bitte ${SHDD}1 als \Z3bootable\Zn markieren." 12 81
}

dialog_setup_hdd_info_flash()
{
	local SHDD="$(echo $HDD | sed 's/\/dev\///')"

	dialog \
	--colors \
	--title "[ Festplatten Partitionierung ]" \
	--backtitle "${TITLE}" \
	--ok-label "Weiter" \
	--msgbox "\nBitte legen Sie 1 Partition an.\n\n\
		[ \Z3${SHDD}1\Zn ] Typ: \Z3Linux\Zn mit dem gesamten Speicher\n\
		Bitte ${SHDD}1 als \Z3bootable\Zn markieren." 12 81
}

dialog_setup_hdd_info_auto()
{
	local SHDD="$(echo $HDD | sed 's/\/dev\///')"

	dialog \
	--colors \
	--title "[ Festplatten Partitionierung ]" \
	--backtitle "${TITLE}" \
	--ok-label "Weiter" \
	--msgbox "\nAchtung!\n\
		Alle Daten werden von der Disk [ \Z3${HDD}\Zn ] gelöscht!" 12 81
}

dialog_setup_system_menu()
{
	local i

	i=$(dialog \
	--backtitle "${TITLE}" \
	--title "[ Festplatten Partitionierung ]" \
	--cancel-label "Abbrechen" \
	--ok-label "Weiter" \
	--stdout \
	--colors \
	--menu "\nWaehlen Sie die Installations-Methode" 14 70 5 \
	"1" "Automatisches Setup (Empfohlen)" \
	"" "" \
	"" "\Z1Experten Modi:\Zn" \
	"2" "Normale IDE-Disk (Manuell)" \
	"3" "Flash-Speicher (Manuell)")
	RES=$?
	[[ ${RES} -eq 1 ]] && return 1
	if [[ ${RES} -eq 0 ]]
	then
		case "${i}" in
			"1") run_install_auto ;;
        		"2") run_install_normal ;;
			"3") run_install_flash ;;
			"") dialog_setup_system_menu;;
		esac
	fi
}

dialog_hardware_detection()
{
	local i
	local hwtmp

	if [ -x $(which mktemp &> /dev/null) ]
	then
		hwtmp="$(mktemp)"
	else
		hwtmp="/tmp/hwtmp.sh"
	fi

	[[ ! -z ${installdevs} ]] && installdevs=""

	echo "dialog \\"  > ${hwtmp}
	echo "--backtitle \"${TITLE}\" \\" >> ${hwtmp}
	echo "--ok-label \"Weiter\" \\" >> ${hwtmp}
	echo "--stdout \\" >> ${hwtmp}
	echo "--colors \\" >> ${hwtmp}
	echo "--msgbox \"Gefundene Hardware:\n\n \\" >> ${hwtmp}
	echo "	Festplatten:\n \\" >> ${hwtmp}

	if [[ ! -z ${scsidisks} ]]
	then
		for i in ${scsidisks}
		do
			if [[ ${i} != ${cdromdev} ]]
			then
				echo "		\\Z7SCSI: \\Z3${i}\\Zn\n \\" >> ${hwtmp}
				installdevs="${installdevs} ${i}"
			fi
		done
	fi

	if [[ ! -z ${idedisks} ]]
	then
		for i in ${idedisks}
		do
			if [[ ${i} != ${cdromdev} ]]
			then
				echo "		\\Z7IDE:  \\Z3${i}\\Zn\n \\" >> ${hwtmp}
				installdevs="${installdevs} ${i}"
			fi
		done
	fi

	if [[ ! -z ${cdromdev} ]]
	then
		echo "	\n \\" >> ${hwtmp}
		echo "	\\Z7andere Laufwerke:\n \\" >> ${hwtmp}
		echo "		CDROM: \\Z3${cdromdev}\\Zn\n \\" >> ${hwtmp}
	fi

	# other devices
	run_hardware_detection
	case "${SPECIALDEVICE}" in
		zotac) echo "	\n\n\n \\Z2Zotac Device erkannt!\\Zn \\" >> ${hwtmp} ;;
		rangee) echo "	\n\n\n \\Z2Rangee Device erkannt!\\Zn \\" >> ${hwtmp} ;;
		*) echo "	\n\n\n \\ZnStandard Device erkannt!\\Zn \\" >> ${hwtmp} ;;
	esac

	echo "	\" 13 70" >> ${hwtmp}
	chmod a+x ${hwtmp}
	${hwtmp}

	# remove tmp file
	if [[ -f ${hwtmp} ]]
	then
		rm ${hwtmp}
	fi
}

dialog_setup_hdd_partitions_manuell()
{
	local i

	if [[ -z ${installdevs} ]]
	then
		dialog \
		--backtitle "${TITLE}" \
		--ok-label "Beenden" \
		--msgbox "Kein geeignetes Laufwerk gefunden.\nDie Installation ist fehlgeschlagen." 6 70
		exit 1
	else

		echo "dialog \\" > /tmp/hddtmp.sh
		echo "--backtitle \"${TITLE}\" \\" >> /tmp/hddtmp.sh
		echo "--ok-label \"Weiter\" \\" >> /tmp/hddtmp.sh
		echo "--cancel-label \"Beenden\" \\" >> /tmp/hddtmp.sh
		echo "--stdout \\" >> /tmp/hddtmp.sh
		echo "--menu \"Installations Laufwerk auswaehlen:\" 10 70 3 \\" >> /tmp/hddtmp.sh

		for i in ${installdevs}
		do
			echo "\"${i}\" \"\" \\" >> /tmp/hddtmp.sh
		done
		echo -e "\n" >> /tmp/hddtmp.sh

		chmod a+x /tmp/hddtmp.sh
		HDD="$(/tmp/hddtmp.sh)"
		RES=$?
		[[ ${RES} -eq 1 ]] && return 1
		if [[ ${RES} -eq 0 ]]
		then
			dialog_setup_hdd_info
			setup_hdd_partitions_manuell
		fi
	fi
}

dialog_setup_hdd_partitions_manuell_flash()
{
	local i

	if [[ -z ${installdevs} ]]
	then
		dialog \
		--backtitle "${TITLE}" \
		--ok-label "Beenden" \
		--msgbox "Kein geeignetes Laufwerk gefunden.\nDie Installation ist fehlgeschlagen." 6 70
		exit 1
	else

		echo "dialog \\" > /tmp/hddtmp.sh
		echo "--backtitle \"${TITLE}\" \\" >> /tmp/hddtmp.sh
		echo "--ok-label \"Weiter\" \\" >> /tmp/hddtmp.sh
		echo "--cancel-label \"Beenden\" \\" >> /tmp/hddtmp.sh
		echo "--stdout \\" >> /tmp/hddtmp.sh
		echo "--menu \"Installations Laufwerk auswaehlen:\" 10 70 3 \\" >> /tmp/hddtmp.sh

		for i in ${installdevs}
		do
			echo "\"${i}\" \"\" \\" >> /tmp/hddtmp.sh
		done
		echo -e "\n" >> /tmp/hddtmp.sh

		chmod a+x /tmp/hddtmp.sh
		HDD="$(/tmp/hddtmp.sh)"
		RES=$?
		[[ ${RES} -eq 1 ]] && return 1
		if [[ ${RES} -eq 0 ]]
		then
			dialog_setup_hdd_info_flash
			setup_hdd_partitions_manuell_flash
		fi
	fi
}

dialog_setup_hdd_partitions_auto()
{
	local i

	if [[ -z ${installdevs} ]]
	then
		dialog \
		--backtitle "${TITLE}" \
		--ok-label "Beenden" \
		--msgbox "Kein geeignetes Laufwerk gefunden.\nDie Installation ist fehlgeschlagen." 6 70
		exit 1
	else

		echo "dialog \\" > /tmp/hddtmp.sh
		echo "--backtitle \"${TITLE}\" \\" >> /tmp/hddtmp.sh
		echo "--ok-label \"Weiter\" \\" >> /tmp/hddtmp.sh
		echo "--cancel-label \"Beenden\" \\" >> /tmp/hddtmp.sh
		echo "--stdout \\" >> /tmp/hddtmp.sh
		echo "--menu \"Installations Laufwerk auswaehlen:\" 10 70 3 \\" >> /tmp/hddtmp.sh

		for i in ${installdevs}
		do
			echo "\"${i}\" \"\" \\" >> /tmp/hddtmp.sh
		done
		echo -e "\n" >> /tmp/hddtmp.sh

		chmod a+x /tmp/hddtmp.sh
		HDD="$(/tmp/hddtmp.sh)"
		RES=$?
		[[ ${RES} -eq 1 ]] && return 1
		if [[ ${RES} -eq 0 ]]
		then
			dialog_setup_hdd_info_auto
			dialog_setup_hdd_create_partitions
			setup_hdd_partitions_auto
		fi
	fi
}

dialog_setup_hdd_create_partitions()
{
	dialog \
	--backtitle "${TITLE}" \
	--infobox "Erstelle Disk Partitionen ..." 3 70
}

dialog_setup_hdd_format()
{
	dialog \
	--backtitle "${TITLE}" \
	--infobox "Erstelle Datei-Systeme ..." 3 70
}

dialog_install_settings()
{
	dialog \
	--backtitle "${TITLE}" \
	--infobox "Speichere System-Einstellungen ..." 3 70
}

dialog_install_system_image()
{
	dialog \
	--backtitle "${TITLE}" \
	--gauge "Kopiere System-Image ..." 6 80
}

dialog_install_meter()
{
	while [[ ${CURRENTLINE} != ${TOTALLINES} ]]
	do
		CURRENTLINE=$(grep -c . /tmp/install.log)
		PERCENT=$(( ${CURRENTLINE} * 100 / ${TOTALLINES}))
		echo ${PERCENT}
		sleep 1
	done
	rm -f /tmp/install.log
	return 0
}


dialog_install_bootsector()
{
	dialog \
	--backtitle "${TITLE}" \
	--infobox "Schreibe den Bootsektor ..." 3 70
}

dialog_install_successful()
{
	dialog \
	--backtitle "${TITLE}" \
	--colors \
	--msgbox "Die Installation war \Z2erfolgreich\Zn." 5 81
}

dialog_install_failure()
{
	dialog \
	--backtitle "${TITLE}" \
	--colors \
	--msgbox "Die Installation ist \Z1Fehlgeschlagen\Zn.\n\n\
		Fehler bei ${ERROR}, RetVal: ${RETVAL} \
	" 10 81
}

dialog_main()
{
	METHOD=0

	while [[ ${METHOD} -le 2 ]]
	do
		METHOD=$(dialog \
		--backtitle "${TITLE}" \
		--no-cancel \
		--ok-label "Weiter" \
		--stdout \
		--menu "Konfiguration" 14 70 5 \
		"1" "AutoSta_LX installieren" \
		"2" "Uebersicht gefundener Laufwerke" \
		"3" "Beenden und neustarten" \
		"4" "Beenden und eine Shell starten")
		RES=$?
		[[ ${RES} -eq 1 ]] && exit 1
		if [[ ${RES} -eq 0 ]]
		then
			case ${METHOD} in
        			"1") dialog_setup_system_menu ;;
				"2") dialog_hardware_detection ;;
				"3") install_do_reboot ;;
				"4") /bin/bash --login -i ;;
			esac
		fi
	done
}

#################################################
#		Install Komandos		#
#################################################
run_hardware_detection()
{
	local hwinfo
	
	hwinfo="$(hwinfo --bios --storage)"

	# check for special devices/clients:
	# if zotac a zotac and the disk is a removeable device, then add rootdelay to kernelcmd
	local removable=0
	if [[ ! -z $(echo "${hwinfo}" | grep -i zotac) ]]
	then
		for i in /sys/block/[hs]d*/removable
		do
			if [[ $(< ${i}) = 1 ]]
			then
				removable=1
			fi
		done

		# only add this for grub legacy, grub2 detect these settings on its own
		export GRUBLEGACYOPTS="rootdelay=8"
		export SPECIALDEVICE="zotac"
	fi

	# check for special devices/clients:
	# if a rangee and disk ist smaller then 256mb move partion one block further ahead
	if [[ ! -z $(echo "${hwinfo}" | grep -i CLE266) ]]
	then
		# for a rangee always define partion startblock +1 
		export FDISKPARTIONBELOW256MB="1"
		export SPECIALDEVICE="rangee"
		export GRUBLEGACYOPTS=""
	fi
}

hdd_size_below_256mb()
{
	local hdd="$1"
	local size
	local retval
	[[ -z ${hdd} ]] && die "Error: get_hdd_size() no \$hdd given!"

	size=$(fdisk -l ${hdd} | grep "Disk.*${hdd}" | sed 's:.*,\ \(.*\)\ byte.*:\1:')
	if [[ ${size} -le 257000000 ]]
	then
		retval="0"
	else
		retval="1"
	fi

	return "${retval}"
}

setup_hdd_partitions_auto()
{
	ROOTHDD="${HDD}1"

	# run this only if FDISKPARTITIONBELOW256MB is not already 1
	if [[ ${FDISKPARTIONBELOW256MB} != 1 ]]
	then
		if hdd_size_below_256mb ${HDD}
		then
			FDISKPARTIONBELOW256MB=1
		else
			FDISKPARTIONBELOW256MB=0
		fi
	fi

	## delete disk
	dd if=/dev/zero of=${HDD} count=1 &> /dev/null || die

	if [[ ${FDISKPARTIONBELOW256MB} = 1 ]]
	then
		## setup one bootable partition
		#1. n= new disk
		#2. p= primary disk
		#3. 1= first partition
		#4. 2= default sector start // small disk needs more space for grub2 mbr sector
		#5. ''= defaul sector end
		#6. a= bootable flag
		#7. 1= boot flag for partition 1
		#8. w= write/quit
		fdisk ${HDD} &> /dev/null << EOF
n
p
1
2

a
1
w
EOF
	else
		## setup one bootable partition
		#1. n= new disk
		#2. p= primary disk
		#3. 1= first partition
		#4. ''= default sector start
		#5. ''= defaul sector end
		#6. a= bootable flag
		#7. 1= boot flag for partition 1
		#8. w= write/quit
		fdisk ${HDD} &> /dev/null << EOF
n
p
1


a
1
w
EOF
	fi
}

setup_hdd_partitions_manuell()
{
	BOOTHDD="${HDD}1"
	SWAPHDD="${HDD}2"
	ROOTHDD="${HDD}3"

	## hdds partitionieren manuell
	cfdisk ${HDD} || die
}

setup_hdd_partitions_manuell_flash()
{
	ROOTHDD="${HDD}1"

	## hdds partitionieren manuell
	cfdisk ${HDD} || die
}

setup_hdd_format()
{
	mkswap ${SWAPHDD} || die
	mke2fs -j -q ${BOOTHDD} || die
	mke2fs -j -q ${ROOTHDD} || die
}

setup_hdd_format_flash()
{
	mke2fs -j -q ${ROOTHDD} || die
}

install_mount_rootfs()
{
	swapon ${SWAPHDD} || die
	mount ${ROOTHDD} ${INSTALLPATH} || die
	install -d ${INSTALLPATH}/boot || die
	mount ${BOOTHDD} ${INSTALLPATH}/boot || die
	cd ${INSTALLPATH} || die
}

install_mount_rootfs_flash()
{
	mount ${ROOTHDD} ${INSTALLPATH} || die
	install -d ${INSTALLPATH}/boot || die
	cd ${INSTALLPATH} || die
}

install_system_image()
{
	tar xvjpf ${CDPATH}/system/${CDIMAGENAME} -C ${INSTALLPATH}
}

install_bootsector_chroot()
{
	local my_roothdd
	local grubconf=${INSTALLPATH}/boot/grub/grub.conf
	local grub2conf=/boot/grub/grub.cfg

	# check for grub2
	if [[ -f ${INSTALLPATH}/sbin/grub-mkconfig ]]
	then
		# needed by grub-mkconfig on the first run
		if [[ ! -f ${INSTALLPATH}/boot/grub/video.lst ]]
		then
			install -m0644 ${INSTALLPATH}/lib/grub/*/video.lst ${INSTALLPATH}/boot/grub/video.lst || die
		fi

		# set kernelopts
		if [[ -f ${INSTALLPATH}/etc/conf.d/grub ]]
		then
			sed -i "s:^\(export GRUB_CMDLINE_LINUX_DEFAULT=\).*:\1\"${KERNELOPTS}\":" ${INSTALLPATH}/etc/conf.d/grub || die
		else
			echo "export GRUB_CMDLINE_LINUX_DEFAULT=\"${KERNELOPTS}\"" >  ${INSTALLPATH}/etc/conf.d/grub || die
		fi
		echo 'grub-mkdevicemap' > ${INSTALLPATH}/root/.installrc || die
		echo "LC_ALL=C grub-mkconfig -o ${grub2conf}  &> /dev/null" >> ${INSTALLPATH}/root/.installrc || die
		echo "grub-install --no-floppy ${HDD} &> /dev/null" >> ${INSTALLPATH}/root/.installrc || die
		echo "exit 0" >> ${INSTALLPATH}/root/.installrc || die

	# grub-legacy
	else
		### grubconf schreiben
		source ${INSTALLPATH}/boot/kernelversion

		#for alx only
		if [ -e ${INSTALLPATH}/etc/alx_version ]
		then
			OLD_ALXVER="${ALXVER}"
			source ${INSTALLPATH}/etc/alx_version
			KRNVER="ALX-${ALXVER}"
			ALXVER="${OLD_ALXVER}"
		fi

		[[ -z ${KRNVER} ]] && KRNVER="AutoSta_LX"
		[[ -z ${KRNINITRD} ]] && KRNINITRD="initrd"
		[[ -z ${KRNIMG} ]] && KRNIMG="vmlinuz"

		# uuid support
		if is_uuid_supported
		then
			my_roothdd="UUID=$(get_uuid ${ROOTHDD})"
		else
			my_roothdd="${ROOTHDD}"
		fi

		: > ${grubconf} || die
		echo "default 0" >> ${grubconf} || die
		echo "timeout 3" >> ${grubconf} || die
		# using current root password
		echo "password --md5 $(cat ${INSTALLPATH}/etc/shadow | grep root | cut -d: -f2)"  >> ${grubconf} || die

		echo  >> ${grubconf} || die
		echo "# normal boot" >> ${grubconf} || die
		echo "title ${KRNVER}" >> ${grubconf} || die
		echo "root (hd0,0)" >> ${grubconf} || die
		echo "kernel /boot/${KRNIMG} root=${my_roothdd} ${KERNELOPTS} ${GRUBLEGACYOPTS}" >> ${grubconf} || die
		if is_initrd_supported
		then
			echo "initrd /boot/${KRNINITRD}" >> ${grubconf} || die
		fi

		echo >> ${grubconf} || die
		echo "# admin boot" >> ${grubconf} || die
		echo "title ${KRNVER} - Re-run hardware-detection" >> ${grubconf} || die
		echo "lock"  >> ${grubconf} || die
		echo "root (hd0,0)" >> ${grubconf} || die
		echo "kernel /boot/${KRNIMG} root=${my_roothdd} ${KERNELOPTS} ${GRUBLEGACYOPTS} hardware-auto-detection" >> ${grubconf} || die
		if is_initrd_supported
		then
			echo "initrd /boot/${KRNINITRD}" >> ${grubconf} || die
		fi

		echo >> ${grubconf} || die
		echo "title ${KRNVER} - Reset *all* local settings" >> ${grubconf} || die
		echo "lock"  >> ${grubconf} || die
		echo "root (hd0,0)" >> ${grubconf} || die
		echo "kernel /boot/${KRNIMG} root=${my_roothdd} ${KERNELOPTS} ${GRUBLEGACYOPTS} alx-reset-settings" >> ${grubconf} || die
		if is_initrd_supported
		then
			echo "initrd /boot/${KRNINITRD}" >> ${grubconf} || die
		fi

		# bootsector schreiben chrooted schreiben (lfs/magellan)
		cat > ${INSTALLPATH}/root/.installrc << CHROOTEOF
/usr/sbin/grub --no-floppy --batch << "EOF" 1> /dev/null 2> /dev/null
root (hd0,0)
setup (hd0)
quit
EOF
exit 0
CHROOTEOF
	fi

	## enters chroot
	mount -t proc proc ${INSTALLPATH}/proc
	mount -t sysfs sysfs ${INSTALLPATH}/sys
	mount -o bind /dev ${INSTALLPATH}/dev
	chroot ${INSTALLPATH} /bin/bash --rcfile /root/.installrc -i
	umount ${INSTALLPATH}/proc
	umount ${INSTALLPATH}/sys
	umount ${INSTALLPATH}/dev
	rm ${INSTALLPATH}/root/.installrc
}

is_initrd_supported()
{
	# only generate initrds if the cmd exists
	[[ -x ${INSTALLPATH}/sbin/mkinitrd ]] && return 0
	return 1
}

install_initrd_chroot()
{
	# only generate initrds if the cmd exists
	is_initrd_supported || return 0

	DISKMODS="sd_mod"
	OLDPATAMODS="amd74xx piix sis5513 via82cxxx"
	PATAMODS="ata_piix pata_amd pata_mpiix pata_oldpiix pata_sis pata_via"
	SATAMODS="sata_via sata_sis sata_nv"
	DRMMODS="i915 mga nouveau r128 radeon savage sis tdfx ttm via"
	case ${SPECIALDEVICE} in
		zotac) FBMODS="" ;;
		rangee) FBMODS="viafb" ;;
		*) FBMODS="uvesafb" ;;
	esac

	# install an appropriate uvesafb.conf
	install -d ${INSTALLPATH}/etc/modprobe.d || die
	echo "options uvesafb mode_option=1024x768-32@60 scroll=ywrap" > ${INSTALLPATH}/etc/modprobe.d/uvesafb.conf || die

	# install an appropriate viafb.conf
	echo "options viafb viafb_mode=1024x768 viafb_refresh=60" > ${INSTALLPATH}/etc/modprobe.d/viafb.conf || die

	cat > ${INSTALLPATH}/root/.installrc << CHROOTEOF
echo "MODULES=\"${FORMAT_FILESYSTEM} ${DISKMODS} ${OLDATAMODS} ${PATAMODS} ${SATAMODS} ${DRMMODS} ${FBMODS}\"" > /etc/conf.d/mkinitrd
mkinitrd -f /boot/$(readlink /boot/initrd) $(readlink /boot/vmlinuz | sed "s:kernel-::g") > /dev/null
exit 0
CHROOTEOF

	## enters chroot
	mount -t proc proc ${INSTALLPATH}/proc
	mount -t sysfs sysfs ${INSTALLPATH}/sys
	mount -o bind /dev ${INSTALLPATH}/dev
	chroot ${INSTALLPATH} /bin/bash --rcfile /root/.installrc -i
	umount ${INSTALLPATH}/proc
	umount ${INSTALLPATH}/sys
	umount ${INSTALLPATH}/dev
	rm ${INSTALLPATH}/root/.installrc
}

is_uuid_supported()
{
	if [[ -x $(which busybox.mkinitrd &> /dev/null) ]]
	then
		# only detect uuids if supported
		if [[ ! -z $(busybox.mkinitrd | grep blkid) ]]
		then
			return 0
		fi
	fi

	return 1
}

get_uuid()
{
	local UUID
	local SEC_TYPE
	local TYPE

	local dev="$1"
	[[ -z ${dev} ]] && die "no dev given"

	# check if given device is already an UUID
	if [[ ${dev/UUID=/}x != ${dev}x ]]
	then
		eval "${dev}"
	else
		eval $(busybox.mkinitrd blkid ${dev} | grep "${dev}:" | sed 's/.*:\ //')
	fi
	echo "${UUID}"
}

install_system_settings()
{
	# schreibe fstab
	if is_uuid_supported
	then
		echo -e "UUID=$(get_uuid ${BOOTHDD})\t/boot\t${FORMAT_FILESYSTEM}\tnoatime,noauto\t1 1" > ${INSTALLPATH}/etc/fstab || die
		echo -e "UUID=$(get_uuid ${ROOTHDD})\t/\t${FORMAT_FILESYSTEM}\tnoatime\t0 0" >> ${INSTALLPATH}/etc/fstab || die
	else
		echo -e "${BOOTHDD}\t/boot\t${FORMAT_FILESYSTEM}\tnoatime,noauto\t1 1" > ${INSTALLPATH}/etc/fstab || die
		echo -e "${ROOTHDD}\t/\t${FORMAT_FILESYSTEM}\tnoatime\t0 0" >> ${INSTALLPATH}/etc/fstab || die
	fi
	# not needed busybox loads all with swapon -a, even if not mentioned in fstab
	#echo -e "UUID='$(get_uuid ${SWAPHDD})'\tswap\tswap\tpri=1\t0 0" >> ${INSTALLPATH}/etc/fstab || die
	echo -e "proc\t/proc\tproc\tdefaults\t0 0" >> ${INSTALLPATH}/etc/fstab || die
	echo -e "shm\t/dev/shm\ttmpfs\tdefaults\t0 0" >> ${INSTALLPATH}/etc/fstab || die

	# install network config skeleton
	install -m0644 ${INSTALLPATH}/etc/alxconfig-ng/skel/net/net.eth0 ${INSTALLPATH}/etc/conf.d/ || die
}

install_system_settings_flash()
{
	# schreibe fstab
	if is_uuid_supported
	then
		echo -e "UUID=$(get_uuid ${ROOTHDD})\t/\t${FORMAT_FILESYSTEM}\tnoatime\t0 0" > ${INSTALLPATH}/etc/fstab || die
	else
		echo -e "${ROOTHDD}\t/\t${FORMAT_FILESYSTEM}\tnoatime\t0 0" > ${INSTALLPATH}/etc/fstab || die
	fi
	echo -e "proc\t/proc\tproc\tdefaults\t0 0" >> ${INSTALLPATH}/etc/fstab || die
	echo -e "shm\t/dev/shm\ttmpfs\tdefaults\t0 0" >> ${INSTALLPATH}/etc/fstab || die
}

install_umount_rootfs()
{
	cd /
	umount ${INSTALLPATH}/boot || die
	umount ${INSTALLPATH} || die
	swapoff ${SWAPHDD} || die
}

install_umount_rootfs_flash()
{
	cd /
	umount ${INSTALLPATH} || die
}

install_do_reboot()
{
	reboot
}

#################################################
#	     Install Ablauf Scripte		#
#################################################

run_install_normal()
{
	dialog_hardware_detection

	dialog_setup_hdd_partitions_manuell
	dialog_setup_hdd_format
	setup_hdd_format > /dev/null
	install_mount_rootfs
	(install_system_image > /tmp/install.log) 2> /tmp/install_errors.log | dialog_install_meter | dialog_install_system_image

	dialog_install_settings
	sleep 1
	install_system_settings
	install_initrd_chroot

	dialog_install_bootsector
	install_bootsector_chroot

	install_umount_rootfs
	dialog_install_successful
}

run_install_flash()
{
	dialog_hardware_detection

	dialog_setup_hdd_partitions_manuell_flash
	dialog_setup_hdd_format
	setup_hdd_format_flash > /dev/null
	install_mount_rootfs_flash
	(install_system_image > /tmp/install.log) 2> /tmp/install_errors.log | dialog_install_meter | dialog_install_system_image

	dialog_install_settings
	sleep 1
	install_system_settings_flash
	install_initrd_chroot

	dialog_install_bootsector
	install_bootsector_chroot

	install_umount_rootfs_flash
	dialog_install_successful
}

run_install_auto()
{
	dialog_hardware_detection

	dialog_setup_hdd_partitions_auto
	dialog_setup_hdd_format
	setup_hdd_format_flash > /dev/null
	install_mount_rootfs_flash
	(install_system_image > /tmp/install.log) 2> /tmp/install_errors.log | dialog_install_meter | dialog_install_system_image

	dialog_install_settings
	sleep 1
	install_system_settings_flash
	install_initrd_chroot

	dialog_install_bootsector
	install_bootsector_chroot

	install_umount_rootfs_flash
	dialog_install_successful
}

dialog_main

exit 0