alxinstall-ng/bin/alxinstall-ng.sh

#!/bin/sh
#
# $Header: /home/cvsd/alx-cvs/alx-src/alxinstall-ng/bin/alxinstall-ng.sh,v 1.15 2008-06-28 00:37:45 niro Exp $
#
# AutoSta_LX Installation Script
#
# Niels Rogalla <niro@magellan-linux.de>
#		<rogalla@augusta-bochum.de>
#
#
# Install Navigation Gui
#

#images: (get ${CDIMAGENAME})
source /mnt/cdrom/system/images.conf

#Includes
source /usr/lib/alxinstall-ng/functions/findhdd.sh > /dev/null
### bugfix ###############################
cdromdev="$(echo ${cdromdev} | sed 's/ //')"
########################################

### System/Config Version
VERSION="0.3.6"
TITLE="alxinstall-ng - ${VERSION}"

CDPATH="/mnt/cdrom"
INSTALLPATH="/mnt/magellan"

### WICHTIG: anzahl lines in der autosta_lx.tar.gz -1
CURRENTLINE=0
#TOTALLINES=11072 # -> now in images.conf

# standart kernel opts
KERNELOPTS="quiet"

# default specialdevices
SPECIALDEVICE=""

#################################################
#		  DIALOG BOXEN			#
#################################################

die()
{
	ERROR=$1
	RETVAL=$?
	dialog_install_failure
	exit 1
}

dialog_warning()
{
	dialog \
	--backtitle "${TITLE}" \
	--colors \
	--defaultno \
	--yesno "\Z1 !!! Achtung !!! \Zn\n\n\
	Diese Festplatte wird unwiederruflich geloescht werden.\n\n\
		Soll ich wirklich fortfahren ?" 10 70
	RES=$?
	if [[ ${RES} -eq 1 ]]
	then
		clear
		echo "Der Vorgang wurde abgebrochen."
		exit 1
	fi
}

dialog_setup_hdd_info()
{
	local SHDD="$(echo ${HDD} | sed 's/\/dev\///')"

	dialog \
	--colors \
	--title "[ Festplatten Partitionierung ]" \
	--backtitle "${TITLE}" \
	--ok-label "Weiter" \
	--msgbox "\nBitte legen Sie 3 Partitionen an.\n\n\
		[ \Z3${SHDD}1\Zn ] Typ: \Z3Linux\Zn mit ca. 50MB\n\
		[ \Z3${SHDD}2\Zn ] Typ: \Z3Linux Swap\Zn mit ca. 256MB\n\
		[ \Z3${SHDD}3\Zn ] Typ: \Z3Linux \Zn mit dem Rest (min. 256MB)\n\n\
		Bitte ${SHDD}1 als \Z3bootable\Zn markieren." 12 81
}

dialog_setup_hdd_info_flash()
{
	local SHDD="$(echo $HDD | sed 's/\/dev\///')"

	dialog \
	--colors \
	--title "[ Festplatten Partitionierung ]" \
	--backtitle "${TITLE}" \
	--ok-label "Weiter" \
	--msgbox "\nBitte legen Sie 1 Partition an.\n\n\
		[ \Z3${SHDD}1\Zn ] Typ: \Z3Linux\Zn mit dem gesamten Speicher\n\
		Bitte ${SHDD}1 als \Z3bootable\Zn markieren." 12 81
}

dialog_setup_hdd_info_auto()
{
	local SHDD="$(echo $HDD | sed 's/\/dev\///')"

	dialog \
	--colors \
	--title "[ Festplatten Partitionierung ]" \
	--backtitle "${TITLE}" \
	--ok-label "Weiter" \
	--msgbox "\nAchtung!\n\
		Alle Daten werden von der Disk [ \Z3${HDD}\Zn ] gelöscht!" 12 81
}

dialog_setup_system_menu()
{
	local i

	i=$(dialog \
	--backtitle "${TITLE}" \
	--title "[ Festplatten Partitionierung ]" \
	--cancel-label "Abbrechen" \
	--ok-label "Weiter" \
	--stdout \
	--colors \
	--menu "\nWaehlen Sie die Installations-Methode" 14 70 5 \
	"1" "Automatisches Setup (Empfohlen)" \
	"" "" \
	"" "\Z1Experten Modi:\Zn" \
	"2" "Normale IDE-Disk (Manuell)" \
	"3" "Flash-Speicher (Manuell)")
	RES=$?
	[[ ${RES} -eq 1 ]] && return 1
	if [[ ${RES} -eq 0 ]]
	then
		case "${i}" in
			"1") run_install_auto ;;
        		"2") run_install_normal ;;
			"3") run_install_flash ;;
			"") dialog_setup_system_menu;;
		esac
	fi
}

dialog_hardware_detection()
{
	local i
	local hwtmp

	if [ -x $(which mktemp &> /dev/null) ]
	then
		hwtmp="$(mktemp)"
	else
		hwtmp="/tmp/hwtmp.sh"
	fi

	[[ ! -z ${installdevs} ]] && installdevs=""

	echo "dialog \\"  > ${hwtmp}
	echo "--backtitle \"${TITLE}\" \\" >> ${hwtmp}
	echo "--ok-label \"Weiter\" \\" >> ${hwtmp}
	echo "--stdout \\" >> ${hwtmp}
	echo "--colors \\" >> ${hwtmp}
	echo "--msgbox \"Gefundene Hardware:\n\n \\" >> ${hwtmp}
	echo "	Festplatten:\n \\" >> ${hwtmp}

	if [[ ! -z ${scsidisks} ]]
	then
		for i in ${scsidisks}
		do
			if [[ ${i} != ${cdromdev} ]]
			then
				echo "		\\Z7SCSI: \\Z3${i}\\Zn\n \\" >> ${hwtmp}
				installdevs="${installdevs} ${i}"
			fi
		done
	fi

	if [[ ! -z ${idedisks} ]]
	then
		for i in ${idedisks}
		do
			if [[ ${i} != ${cdromdev} ]]
			then
				echo "		\\Z7IDE:  \\Z3${i}\\Zn\n \\" >> ${hwtmp}
				installdevs="${installdevs} ${i}"
			fi
		done
	fi

	if [[ ! -z ${cdromdev} ]]
	then
		echo "	\n \\" >> ${hwtmp}
		echo "	\\Z7andere Laufwerke:\n \\" >> ${hwtmp}
		echo "		CDROM: \\Z3${cdromdev}\\Zn\n \\" >> ${hwtmp}
	fi

	# other devices
	run_hardware_detection
	case "${SPECIALDEVICE}" in
		zotac) echo "	\n\n\n \\Z2Zotac Device erkannt!\\Zn \\" >> ${hwtmp} ;;
		*) echo "	\n\n\n \\ZnStandard Device erkannt!\\Zn \\" >> ${hwtmp} ;;
	esac

	echo "	\" 13 70" >> ${hwtmp}
	chmod a+x ${hwtmp}
	${hwtmp}

	# remove tmp file
	if [[ -f ${hwtmp} ]]
	then
		rm ${hwtmp}
	fi
}

dialog_setup_hdd_partitions_manuell()
{
	local i

	if [[ -z ${installdevs} ]]
	then
		dialog \
		--backtitle "${TITLE}" \
		--ok-label "Beenden" \
		--msgbox "Kein geeignetes Laufwerk gefunden.\nDie Installation ist fehlgeschlagen." 6 70
		exit 1
	else

		echo "dialog \\" > /tmp/hddtmp.sh
		echo "--backtitle \"${TITLE}\" \\" >> /tmp/hddtmp.sh
		echo "--ok-label \"Weiter\" \\" >> /tmp/hddtmp.sh
		echo "--cancel-label \"Beenden\" \\" >> /tmp/hddtmp.sh
		echo "--stdout \\" >> /tmp/hddtmp.sh
		echo "--menu \"Installations Laufwerk auswaehlen:\" 10 70 3 \\" >> /tmp/hddtmp.sh

		for i in ${installdevs}
		do
			echo "\"${i}\" \"\" \\" >> /tmp/hddtmp.sh
		done
		echo -e "\n" >> /tmp/hddtmp.sh

		chmod a+x /tmp/hddtmp.sh
		HDD="$(/tmp/hddtmp.sh)"
		RES=$?
		[[ ${RES} -eq 1 ]] && return 1
		if [[ ${RES} -eq 0 ]]
		then
			dialog_setup_hdd_info
			setup_hdd_partitions_manuell
		fi
	fi
}

dialog_setup_hdd_partitions_manuell_flash()
{
	local i

	if [[ -z ${installdevs} ]]
	then
		dialog \
		--backtitle "${TITLE}" \
		--ok-label "Beenden" \
		--msgbox "Kein geeignetes Laufwerk gefunden.\nDie Installation ist fehlgeschlagen." 6 70
		exit 1
	else

		echo "dialog \\" > /tmp/hddtmp.sh
		echo "--backtitle \"${TITLE}\" \\" >> /tmp/hddtmp.sh
		echo "--ok-label \"Weiter\" \\" >> /tmp/hddtmp.sh
		echo "--cancel-label \"Beenden\" \\" >> /tmp/hddtmp.sh
		echo "--stdout \\" >> /tmp/hddtmp.sh
		echo "--menu \"Installations Laufwerk auswaehlen:\" 10 70 3 \\" >> /tmp/hddtmp.sh

		for i in ${installdevs}
		do
			echo "\"${i}\" \"\" \\" >> /tmp/hddtmp.sh
		done
		echo -e "\n" >> /tmp/hddtmp.sh

		chmod a+x /tmp/hddtmp.sh
		HDD="$(/tmp/hddtmp.sh)"
		RES=$?
		[[ ${RES} -eq 1 ]] && return 1
		if [[ ${RES} -eq 0 ]]
		then
			dialog_setup_hdd_info_flash
			setup_hdd_partitions_manuell_flash
		fi
	fi
}

dialog_setup_hdd_partitions_auto()
{
	local i

	if [[ -z ${installdevs} ]]
	then
		dialog \
		--backtitle "${TITLE}" \
		--ok-label "Beenden" \
		--msgbox "Kein geeignetes Laufwerk gefunden.\nDie Installation ist fehlgeschlagen." 6 70
		exit 1
	else

		echo "dialog \\" > /tmp/hddtmp.sh
		echo "--backtitle \"${TITLE}\" \\" >> /tmp/hddtmp.sh
		echo "--ok-label \"Weiter\" \\" >> /tmp/hddtmp.sh
		echo "--cancel-label \"Beenden\" \\" >> /tmp/hddtmp.sh
		echo "--stdout \\" >> /tmp/hddtmp.sh
		echo "--menu \"Installations Laufwerk auswaehlen:\" 10 70 3 \\" >> /tmp/hddtmp.sh

		for i in ${installdevs}
		do
			echo "\"${i}\" \"\" \\" >> /tmp/hddtmp.sh
		done
		echo -e "\n" >> /tmp/hddtmp.sh

		chmod a+x /tmp/hddtmp.sh
		HDD="$(/tmp/hddtmp.sh)"
		RES=$?
		[[ ${RES} -eq 1 ]] && return 1
		if [[ ${RES} -eq 0 ]]
		then
			dialog_setup_hdd_info_auto
			dialog_setup_hdd_create_partitions
			setup_hdd_partitions_auto
		fi
	fi
}

dialog_setup_hdd_create_partitions()
{
	dialog \
	--backtitle "${TITLE}" \
	--infobox "Erstelle Disk Partitionen ..." 3 70
}

dialog_setup_hdd_format()
{
	dialog \
	--backtitle "${TITLE}" \
	--infobox "Erstelle Datei-Systeme ..." 3 70
}

dialog_install_settings()
{
	dialog \
	--backtitle "${TITLE}" \
	--infobox "Speichere System-Einstellungen ..." 3 70
}

dialog_install_system_image()
{
	dialog \
	--backtitle "${TITLE}" \
	--gauge "Kopiere System-Image ..." 6 80
}

dialog_install_meter()
{
	while [[ ${CURRENTLINE} != ${TOTALLINES} ]]
	do
		CURRENTLINE=$(grep -c . /tmp/install.log)
		PERCENT=$(( ${CURRENTLINE} * 100 / ${TOTALLINES}))
		echo ${PERCENT}
		sleep 1
	done
	rm -f /tmp/install.log
	return 0
}


dialog_install_bootsector()
{
	dialog \
	--backtitle "${TITLE}" \
	--infobox "Schreibe den Bootsektor ..." 3 70
}

dialog_install_successful()
{
	dialog \
	--backtitle "${TITLE}" \
	--colors \
	--msgbox "Die Installation war \Z2erfolgreich\Zn." 5 81
}

dialog_install_failure()
{
	dialog \
	--backtitle "${TITLE}" \
	--colors \
	--msgbox "Die Installation ist \Z1Fehlgeschlagen\Zn.\n\n\
		Fehler bei ${ERROR}, RetVal: ${RETVAL} \
	" 10 81
}

dialog_main()
{
	METHOD=0

	while [[ ${METHOD} -le 2 ]]
	do
		METHOD=$(dialog \
		--backtitle "${TITLE}" \
		--no-cancel \
		--ok-label "Weiter" \
		--stdout \
		--menu "Konfiguration" 14 70 5 \
		"1" "AutoSta_LX installieren" \
		"2" "Uebersicht gefundener Laufwerke" \
		"3" "Beenden und neustarten" \
		"4" "Beenden und eine Shell starten")
		RES=$?
		[[ ${RES} -eq 1 ]] && exit 1
		if [[ ${RES} -eq 0 ]]
		then
			case ${METHOD} in
        			"1") dialog_setup_system_menu ;;
				"2") dialog_hardware_detection ;;
				"3") install_do_reboot ;;
				"4") /bin/bash --login -i ;;
			esac
		fi
	done
}

#################################################
#		Install Komandos		#
#################################################
run_hardware_detection()
{
	# check for special devices/clients:
	# if zotac a zotac and the disk is a removeable device, then add rootdelay to kernelcmd
	local removable=0
	if [[ ! -z $(lspci -v | grep -i zotac) ]]
	then
		for i in /sys/block/[hs]d*/removable
		do
			if [[ $(< ${i}) = 1 ]]
			then
				removable=1
			fi
		done

		export KERNELOPTS="${KERNELOPTS} rootdelay=8"
		export SPECIALDEVICE="zotac"
	fi
}

setup_hdd_partitions_auto()
{
	ROOTHDD="${HDD}1"

	## delete disk
	dd if=/dev/zero of=${HDD} count=1 &> /dev/null || die

	## setup one bootable partition
	#1. n= new disk
	#2. p= primary disk
	#3. 1= first partition
	#4. ''= default sector start
	#5. ''= defaul sector end
	#6. a= bootable flag
	#7. 1= boot flag for partition 1
	#8. w= write/quit
	fdisk ${HDD} &> /dev/null << EOF
n
p
1


a
1
w
EOF
}

setup_hdd_partitions_manuell()
{
	BOOTHDD="${HDD}1"
	SWAPHDD="${HDD}2"
	ROOTHDD="${HDD}3"

	## hdds partitionieren manuell
	cfdisk ${HDD} || die
}

setup_hdd_partitions_manuell_flash()
{
	ROOTHDD="${HDD}1"

	## hdds partitionieren manuell
	cfdisk ${HDD} || die
}

setup_hdd_format()
{
	mkswap ${SWAPHDD} || die
	mke2fs -j -q ${BOOTHDD} || die
	mke2fs -j -q ${ROOTHDD} || die
}

setup_hdd_format_flash()
{
	mke2fs -j -q ${ROOTHDD} || die
}

install_mount_rootfs()
{
	swapon ${SWAPHDD} || die
	mount ${ROOTHDD} ${INSTALLPATH} || die
	install -d ${INSTALLPATH}/boot || die
	mount ${BOOTHDD} ${INSTALLPATH}/boot || die
	cd ${INSTALLPATH} || die
}

install_mount_rootfs_flash()
{
	mount ${ROOTHDD} ${INSTALLPATH} || die
	install -d ${INSTALLPATH}/boot || die
	cd ${INSTALLPATH} || die
}

install_system_image()
{
	tar xvjpf ${CDPATH}/system/${CDIMAGENAME} -C ${INSTALLPATH}
}

install_bootsector_chroot()
{
	local my_roothdd

	### grubconf schreiben
	source ${INSTALLPATH}/boot/kernelversion

	#for alx only
	if [ -e ${INSTALLPATH}/etc/alx_version ]
	then
		OLD_ALXVER="${ALXVER}"
		source ${INSTALLPATH}/etc/alx_version
		KRNVER="ALX-${ALXVER}"
		ALXVER="${OLD_ALXVER}"
	fi

	[[ -z ${KRNVER} ]] && KRNVER="AutoSta_LX"
	[[ -z ${KRNINITRD} ]] && KRNINITRD="initrd"
	[[ -z ${KRNIMG} ]] && KRNIMG="vmlinuz"

	# uuid support
	if is_uuid_supported
	then
		my_roothdd="UUID=$(get_uuid ${ROOTHDD})"
	else
		my_roothdd="${ROOTHDD}"
	fi

	local grubconf=${INSTALLPATH}/boot/grub/grub.conf
	: > ${grubconf} || die
	echo "default 0" >> ${grubconf} || die
	echo "timeout 3" >> ${grubconf} || die
	# using current root password
	echo "password --md5 $(cat ${INSTALLPATH}/etc/shadow | grep root | cut -d: -f2)"  >> ${grubconf} || die

	echo  >> ${grubconf} || die
	echo "# normal boot" >> ${grubconf} || die
	echo "title ${KRNVER}" >> ${grubconf} || die
	echo "root (hd0,0)" >> ${grubconf} || die
	echo "kernel /boot/${KRNIMG} root=${my_roothdd} ${KERNELOPTS}" >> ${grubconf} || die
	if is_initrd_supported
	then
		echo "initrd /boot/${KRNINITRD}" >> ${grubconf} || die
	fi

	echo >> ${grubconf} || die
	echo "# admin boot" >> ${grubconf} || die
	echo "title ${KRNVER} - Re-run hardware-detection" >> ${grubconf} || die
	echo "lock"  >> ${grubconf} || die
	echo "root (hd0,0)" >> ${grubconf} || die
	echo "kernel /boot/${KRNIMG} root=${my_roothdd} ${KERNELOPTS} hardware-auto-detection" >> ${grubconf} || die
	if is_initrd_supported
	then
		echo "initrd /boot/${KRNINITRD}" >> ${grubconf} || die
	fi

	echo >> ${grubconf} || die
	echo "title ${KRNVER} - Reset *all* local settings" >> ${grubconf} || die
	echo "lock"  >> ${grubconf} || die
	echo "root (hd0,0)" >> ${grubconf} || die
	echo "kernel /boot/${KRNIMG} root=${my_roothdd} ${KERNELOPTS} alx-reset-settings" >> ${grubconf} || die
	if is_initrd_supported
	then
		echo "initrd /boot/${KRNINITRD}" >> ${grubconf} || die
	fi

	# bootsector schreiben chrooted schreiben (lfs/magellan)
	cat > ${INSTALLPATH}/root/.bashrc << CHROOTEOF
/usr/sbin/grub --no-floppy --batch << "EOF" 1> /dev/null 2> /dev/null
root (hd0,0)
setup (hd0)
quit
EOF
exit 0
CHROOTEOF

	## enters chroot
	mount -t proc proc ${INSTALLPATH}/proc
	mount -t sysfs sysfs ${INSTALLPATH}/sys
	mount -o bind /dev ${INSTALLPATH}/dev
	chroot ${INSTALLPATH} /bin/bash --rcfile /root/.bashrc -i
	umount ${INSTALLPATH}/proc
	umount ${INSTALLPATH}/sys
	umount ${INSTALLPATH}/dev
	rm ${INSTALLPATH}/root/.bashrc
}

is_initrd_supported()
{
	# only generate initrds if the cmd exists
	[[ -x ${INSTALLPATH}/sbin/mkinitrd ]] && return 0
	return 1
}

install_initrd_chroot()
{
	# only generate initrds if the cmd exists
	is_initrd_supported || return 0

	cat > ${INSTALLPATH}/root/.bashrc << CHROOTEOF
echo "MODULES=\"ext3 amd74xx piix sis5513 via82cxxx sd_mod ata_piix pata_amd pata_mpiix pata_oldpiix pata_sis pata_via sata_via sata_sis sata_nv\"" > /etc/conf.d/mkinitrd
mkinitrd -f /boot/$(readlink /boot/initrd) $(readlink /boot/vmlinuz | sed "s:kernel-::g") > /dev/null
exit 0
CHROOTEOF

	## enters chroot
	mount -t proc proc ${INSTALLPATH}/proc
	mount -t sysfs sysfs ${INSTALLPATH}/sys
	mount -o bind /dev ${INSTALLPATH}/dev
	chroot ${INSTALLPATH} /bin/bash --rcfile /root/.bashrc -i
	umount ${INSTALLPATH}/proc
	umount ${INSTALLPATH}/sys
	umount ${INSTALLPATH}/dev
	rm ${INSTALLPATH}/root/.bashrc
}

is_uuid_supported()
{
	if [[ -x $(which busybox.mkinitrd &> /dev/null) ]]
	then
		# only detect uuids if supported
		if [[ ! -z $(busybox.mkinitrd | grep blkid) ]]
		then
			return 0
		fi
	fi

	return 1
}

get_uuid()
{
	local UUID
	local SEC_TYPE
	local TYPE

	local dev="$1"
	[[ -z ${dev} ]] && die "no dev given"

	# check if given device is already an UUID
	if [[ ${dev/UUID=/}x != ${dev}x ]]
	then
		eval "${dev}"
	else
		eval $(busybox.mkinitrd blkid ${dev} | grep "${dev}:" | sed 's/.*:\ //')
	fi
	echo "${UUID}"
}

install_system_settings()
{
	# schreibe fstab
	if is_uuid_supported
	then
		echo -e "UUID=$(get_uuid ${BOOTHDD})\t/boot\text3\tnoatime,noauto\t1 1" > ${INSTALLPATH}/etc/fstab || die
		echo -e "UUID=$(get_uuid ${ROOTHDD})\t/\text3\tnoatime\t0 0" >> ${INSTALLPATH}/etc/fstab || die
	else
		echo -e "${BOOTHDD}\t/boot\text3\tnoatime,noauto\t1 1" > ${INSTALLPATH}/etc/fstab || die
		echo -e "${ROOTHDD}\t/\text3\tnoatime\t0 0" >> ${INSTALLPATH}/etc/fstab || die
	fi
	# not needed busybox loads all with swapon -a, even if not mentioned in fstab
	#echo -e "UUID='$(get_uuid ${SWAPHDD})'\tswap\tswap\tpri=1\t0 0" >> ${INSTALLPATH}/etc/fstab || die
	echo -e "proc\t/proc\tproc\tdefaults\t0 0" >> ${INSTALLPATH}/etc/fstab || die
	echo -e "shm\t/dev/shm\ttmpfs\tdefaults\t0 0" >> ${INSTALLPATH}/etc/fstab || die

	# install network config skeleton
	install -m0644 ${INSTALLPATH}/etc/alxconfig-ng/skel/net/net.eth0 ${INSTALLPATH}/etc/conf.d/ || die
}

install_system_settings_flash()
{
	# schreibe fstab
	if is_uuid_supported
	then
		echo -e "UUID=$(get_uuid ${ROOTHDD})\t/\text3\tnoatime\t0 0" > ${INSTALLPATH}/etc/fstab || die
	else
		echo -e "${ROOTHDD}\t/\text3\tnoatime\t0 0" > ${INSTALLPATH}/etc/fstab || die
	fi
	echo -e "proc\t/proc\tproc\tdefaults\t0 0" >> ${INSTALLPATH}/etc/fstab || die
	echo -e "shm\t/dev/shm\ttmpfs\tdefaults\t0 0" >> ${INSTALLPATH}/etc/fstab || die
}

install_umount_rootfs()
{
	cd /
	umount ${INSTALLPATH}/boot || die
	umount ${INSTALLPATH} || die
	swapoff ${SWAPHDD} || die
}

install_umount_rootfs_flash()
{
	cd /
	umount ${INSTALLPATH} || die
}

install_do_reboot()
{
	reboot
}

#################################################
#	     Install Ablauf Scripte		#
#################################################

run_install_normal()
{
	dialog_hardware_detection

	dialog_setup_hdd_partitions_manuell
	dialog_setup_hdd_format
	setup_hdd_format > /dev/null
	install_mount_rootfs
	(install_system_image > /tmp/install.log) 2> /tmp/install_errors.log | dialog_install_meter | dialog_install_system_image

	dialog_install_bootsector
	install_bootsector_chroot

	dialog_install_settings
	sleep 1
	install_system_settings
	install_initrd_chroot
	install_umount_rootfs
	dialog_install_successful
}

run_install_flash()
{
	dialog_hardware_detection

	dialog_setup_hdd_partitions_manuell_flash
	dialog_setup_hdd_format
	setup_hdd_format_flash > /dev/null
	install_mount_rootfs_flash
	(install_system_image > /tmp/install.log) 2> /tmp/install_errors.log | dialog_install_meter | dialog_install_system_image

	dialog_install_bootsector
	install_bootsector_chroot

	dialog_install_settings
	sleep 1
	install_system_settings_flash
	install_initrd_chroot
	install_umount_rootfs_flash
	dialog_install_successful
}

run_install_auto()
{
	dialog_hardware_detection

	dialog_setup_hdd_partitions_auto
	dialog_setup_hdd_format
	setup_hdd_format_flash > /dev/null
	install_mount_rootfs_flash
	(install_system_image > /tmp/install.log) 2> /tmp/install_errors.log | dialog_install_meter | dialog_install_system_image

	dialog_install_bootsector
	install_bootsector_chroot

	dialog_install_settings
	sleep 1
	install_system_settings_flash
	install_initrd_chroot
	install_umount_rootfs_flash
	dialog_install_successful
}

dialog_main

exit 0
1	#!/bin/sh
2	#
3	# $Header: /home/cvsd/alx-cvs/alx-src/alxinstall-ng/bin/alxinstall-ng.sh,v 1.15 2008-06-28 00:37:45 niro Exp $
4	#
5	# AutoSta_LX Installation Script
6	#
7	# Niels Rogalla <niro@magellan-linux.de>
8	# <rogalla@augusta-bochum.de>
9	#
10	#
11	# Install Navigation Gui
12	#
13
14	#images: (get ${CDIMAGENAME})
15	source /mnt/cdrom/system/images.conf
16
17	#Includes
18	source /usr/lib/alxinstall-ng/functions/findhdd.sh > /dev/null
19	### bugfix ###############################
20	cdromdev="$(echo ${cdromdev} \| sed 's/ //')"
21	########################################
22
23	### System/Config Version
24	VERSION="0.3.6"
25	TITLE="alxinstall-ng - ${VERSION}"
26
27	CDPATH="/mnt/cdrom"
28	INSTALLPATH="/mnt/magellan"
29
30	### WICHTIG: anzahl lines in der autosta_lx.tar.gz -1
31	CURRENTLINE=0
32	#TOTALLINES=11072 # -> now in images.conf
33
34	# standart kernel opts
35	KERNELOPTS="quiet"
36
37	# default specialdevices
38	SPECIALDEVICE=""
39
40	#################################################
41	# DIALOG BOXEN #
42	#################################################
43
44	die()
45	{
46	ERROR=$1
47	RETVAL=$?
48	dialog_install_failure
49	exit 1
50	}
51
52	dialog_warning()
53	{
54	dialog \
55	--backtitle "${TITLE}" \
56	--colors \
57	--defaultno \
58	--yesno "\Z1 !!! Achtung !!! \Zn\n\n\
59	Diese Festplatte wird unwiederruflich geloescht werden.\n\n\
60	Soll ich wirklich fortfahren ?" 10 70
61	RES=$?
62	if [[ ${RES} -eq 1 ]]
63	then
64	clear
65	echo "Der Vorgang wurde abgebrochen."
66	exit 1
67	fi
68	}
69
70	dialog_setup_hdd_info()
71	{
72	local SHDD="$(echo ${HDD} \| sed 's/\/dev\///')"
73
74	dialog \
75	--colors \
76	--title "[ Festplatten Partitionierung ]" \
77	--backtitle "${TITLE}" \
78	--ok-label "Weiter" \
79	--msgbox "\nBitte legen Sie 3 Partitionen an.\n\n\
80	[ \Z3${SHDD}1\Zn ] Typ: \Z3Linux\Zn mit ca. 50MB\n\
81	[ \Z3${SHDD}2\Zn ] Typ: \Z3Linux Swap\Zn mit ca. 256MB\n\
82	[ \Z3${SHDD}3\Zn ] Typ: \Z3Linux \Zn mit dem Rest (min. 256MB)\n\n\
83	Bitte ${SHDD}1 als \Z3bootable\Zn markieren." 12 81
84	}
85
86	dialog_setup_hdd_info_flash()
87	{
88	local SHDD="$(echo $HDD \| sed 's/\/dev\///')"
89
90	dialog \
91	--colors \
92	--title "[ Festplatten Partitionierung ]" \
93	--backtitle "${TITLE}" \
94	--ok-label "Weiter" \
95	--msgbox "\nBitte legen Sie 1 Partition an.\n\n\
96	[ \Z3${SHDD}1\Zn ] Typ: \Z3Linux\Zn mit dem gesamten Speicher\n\
97	Bitte ${SHDD}1 als \Z3bootable\Zn markieren." 12 81
98	}
99
100	dialog_setup_hdd_info_auto()
101	{
102	local SHDD="$(echo $HDD \| sed 's/\/dev\///')"
103
104	dialog \
105	--colors \
106	--title "[ Festplatten Partitionierung ]" \
107	--backtitle "${TITLE}" \
108	--ok-label "Weiter" \
109	--msgbox "\nAchtung!\n\
110	Alle Daten werden von der Disk [ \Z3${HDD}\Zn ] gelöscht!" 12 81
111	}
112
113	dialog_setup_system_menu()
114	{
115	local i
116
117	i=$(dialog \
118	--backtitle "${TITLE}" \
119	--title "[ Festplatten Partitionierung ]" \
120	--cancel-label "Abbrechen" \
121	--ok-label "Weiter" \
122	--stdout \
123	--colors \
124	--menu "\nWaehlen Sie die Installations-Methode" 14 70 5 \
125	"1" "Automatisches Setup (Empfohlen)" \
126	"" "" \
127	"" "\Z1Experten Modi:\Zn" \
128	"2" "Normale IDE-Disk (Manuell)" \
129	"3" "Flash-Speicher (Manuell)")
130	RES=$?
131	[[ ${RES} -eq 1 ]] && return 1
132	if [[ ${RES} -eq 0 ]]
133	then
134	case "${i}" in
135	"1") run_install_auto ;;
136	"2") run_install_normal ;;
137	"3") run_install_flash ;;
138	"") dialog_setup_system_menu;;
139	esac
140	fi
141	}
142
143	dialog_hardware_detection()
144	{
145	local i
146	local hwtmp
147
148	if [ -x $(which mktemp &> /dev/null) ]
149	then
150	hwtmp="$(mktemp)"
151	else
152	hwtmp="/tmp/hwtmp.sh"
153	fi
154
155	[[ ! -z ${installdevs} ]] && installdevs=""
156
157	echo "dialog \\" > ${hwtmp}
158	echo "--backtitle \"${TITLE}\" \\" >> ${hwtmp}
159	echo "--ok-label \"Weiter\" \\" >> ${hwtmp}
160	echo "--stdout \\" >> ${hwtmp}
161	echo "--colors \\" >> ${hwtmp}
162	echo "--msgbox \"Gefundene Hardware:\n\n \\" >> ${hwtmp}
163	echo " Festplatten:\n \\" >> ${hwtmp}
164
165	if [[ ! -z ${scsidisks} ]]
166	then
167	for i in ${scsidisks}
168	do
169	if [[ ${i} != ${cdromdev} ]]
170	then
171	echo " \\Z7SCSI: \\Z3${i}\\Zn\n \\" >> ${hwtmp}
172	installdevs="${installdevs} ${i}"
173	fi
174	done
175	fi
176
177	if [[ ! -z ${idedisks} ]]
178	then
179	for i in ${idedisks}
180	do
181	if [[ ${i} != ${cdromdev} ]]
182	then
183	echo " \\Z7IDE: \\Z3${i}\\Zn\n \\" >> ${hwtmp}
184	installdevs="${installdevs} ${i}"
185	fi
186	done
187	fi
188
189	if [[ ! -z ${cdromdev} ]]
190	then
191	echo " \n \\" >> ${hwtmp}
192	echo " \\Z7andere Laufwerke:\n \\" >> ${hwtmp}
193	echo " CDROM: \\Z3${cdromdev}\\Zn\n \\" >> ${hwtmp}
194	fi
195
196	# other devices
197	run_hardware_detection
198	case "${SPECIALDEVICE}" in
199	zotac) echo " \n\n\n \\Z2Zotac Device erkannt!\\Zn \\" >> ${hwtmp} ;;
200	*) echo " \n\n\n \\ZnStandard Device erkannt!\\Zn \\" >> ${hwtmp} ;;
201	esac
202
203	echo " \" 13 70" >> ${hwtmp}
204	chmod a+x ${hwtmp}
205	${hwtmp}
206
207	# remove tmp file
208	if [[ -f ${hwtmp} ]]
209	then
210	rm ${hwtmp}
211	fi
212	}
213
214	dialog_setup_hdd_partitions_manuell()
215	{
216	local i
217
218	if [[ -z ${installdevs} ]]
219	then
220	dialog \
221	--backtitle "${TITLE}" \
222	--ok-label "Beenden" \
223	--msgbox "Kein geeignetes Laufwerk gefunden.\nDie Installation ist fehlgeschlagen." 6 70
224	exit 1
225	else
226
227	echo "dialog \\" > /tmp/hddtmp.sh
228	echo "--backtitle \"${TITLE}\" \\" >> /tmp/hddtmp.sh
229	echo "--ok-label \"Weiter\" \\" >> /tmp/hddtmp.sh
230	echo "--cancel-label \"Beenden\" \\" >> /tmp/hddtmp.sh
231	echo "--stdout \\" >> /tmp/hddtmp.sh
232	echo "--menu \"Installations Laufwerk auswaehlen:\" 10 70 3 \\" >> /tmp/hddtmp.sh
233
234	for i in ${installdevs}
235	do
236	echo "\"${i}\" \"\" \\" >> /tmp/hddtmp.sh
237	done
238	echo -e "\n" >> /tmp/hddtmp.sh
239
240	chmod a+x /tmp/hddtmp.sh
241	HDD="$(/tmp/hddtmp.sh)"
242	RES=$?
243	[[ ${RES} -eq 1 ]] && return 1
244	if [[ ${RES} -eq 0 ]]
245	then
246	dialog_setup_hdd_info
247	setup_hdd_partitions_manuell
248	fi
249	fi
250	}
251
252	dialog_setup_hdd_partitions_manuell_flash()
253	{
254	local i
255
256	if [[ -z ${installdevs} ]]
257	then
258	dialog \
259	--backtitle "${TITLE}" \
260	--ok-label "Beenden" \
261	--msgbox "Kein geeignetes Laufwerk gefunden.\nDie Installation ist fehlgeschlagen." 6 70
262	exit 1
263	else
264
265	echo "dialog \\" > /tmp/hddtmp.sh
266	echo "--backtitle \"${TITLE}\" \\" >> /tmp/hddtmp.sh
267	echo "--ok-label \"Weiter\" \\" >> /tmp/hddtmp.sh
268	echo "--cancel-label \"Beenden\" \\" >> /tmp/hddtmp.sh
269	echo "--stdout \\" >> /tmp/hddtmp.sh
270	echo "--menu \"Installations Laufwerk auswaehlen:\" 10 70 3 \\" >> /tmp/hddtmp.sh
271
272	for i in ${installdevs}
273	do
274	echo "\"${i}\" \"\" \\" >> /tmp/hddtmp.sh
275	done
276	echo -e "\n" >> /tmp/hddtmp.sh
277
278	chmod a+x /tmp/hddtmp.sh
279	HDD="$(/tmp/hddtmp.sh)"
280	RES=$?
281	[[ ${RES} -eq 1 ]] && return 1
282	if [[ ${RES} -eq 0 ]]
283	then
284	dialog_setup_hdd_info_flash
285	setup_hdd_partitions_manuell_flash
286	fi
287	fi
288	}
289
290	dialog_setup_hdd_partitions_auto()
291	{
292	local i
293
294	if [[ -z ${installdevs} ]]
295	then
296	dialog \
297	--backtitle "${TITLE}" \
298	--ok-label "Beenden" \
299	--msgbox "Kein geeignetes Laufwerk gefunden.\nDie Installation ist fehlgeschlagen." 6 70
300	exit 1
301	else
302
303	echo "dialog \\" > /tmp/hddtmp.sh
304	echo "--backtitle \"${TITLE}\" \\" >> /tmp/hddtmp.sh
305	echo "--ok-label \"Weiter\" \\" >> /tmp/hddtmp.sh
306	echo "--cancel-label \"Beenden\" \\" >> /tmp/hddtmp.sh
307	echo "--stdout \\" >> /tmp/hddtmp.sh
308	echo "--menu \"Installations Laufwerk auswaehlen:\" 10 70 3 \\" >> /tmp/hddtmp.sh
309
310	for i in ${installdevs}
311	do
312	echo "\"${i}\" \"\" \\" >> /tmp/hddtmp.sh
313	done
314	echo -e "\n" >> /tmp/hddtmp.sh
315
316	chmod a+x /tmp/hddtmp.sh
317	HDD="$(/tmp/hddtmp.sh)"
318	RES=$?
319	[[ ${RES} -eq 1 ]] && return 1
320	if [[ ${RES} -eq 0 ]]
321	then
322	dialog_setup_hdd_info_auto
323	dialog_setup_hdd_create_partitions
324	setup_hdd_partitions_auto
325	fi
326	fi
327	}
328
329	dialog_setup_hdd_create_partitions()
330	{
331	dialog \
332	--backtitle "${TITLE}" \
333	--infobox "Erstelle Disk Partitionen ..." 3 70
334	}
335
336	dialog_setup_hdd_format()
337	{
338	dialog \
339	--backtitle "${TITLE}" \
340	--infobox "Erstelle Datei-Systeme ..." 3 70
341	}
342
343	dialog_install_settings()
344	{
345	dialog \
346	--backtitle "${TITLE}" \
347	--infobox "Speichere System-Einstellungen ..." 3 70
348	}
349
350	dialog_install_system_image()
351	{
352	dialog \
353	--backtitle "${TITLE}" \
354	--gauge "Kopiere System-Image ..." 6 80
355	}
356
357	dialog_install_meter()
358	{
359	while [[ ${CURRENTLINE} != ${TOTALLINES} ]]
360	do
361	CURRENTLINE=$(grep -c . /tmp/install.log)
362	PERCENT=$(( ${CURRENTLINE} * 100 / ${TOTALLINES}))
363	echo ${PERCENT}
364	sleep 1
365	done
366	rm -f /tmp/install.log
367	return 0
368	}
369
370
371	dialog_install_bootsector()
372	{
373	dialog \
374	--backtitle "${TITLE}" \
375	--infobox "Schreibe den Bootsektor ..." 3 70
376	}
377
378	dialog_install_successful()
379	{
380	dialog \
381	--backtitle "${TITLE}" \
382	--colors \
383	--msgbox "Die Installation war \Z2erfolgreich\Zn." 5 81
384	}
385
386	dialog_install_failure()
387	{
388	dialog \
389	--backtitle "${TITLE}" \
390	--colors \
391	--msgbox "Die Installation ist \Z1Fehlgeschlagen\Zn.\n\n\
392	Fehler bei ${ERROR}, RetVal: ${RETVAL} \
393	" 10 81
394	}
395
396	dialog_main()
397	{
398	METHOD=0
399
400	while [[ ${METHOD} -le 2 ]]
401	do
402	METHOD=$(dialog \
403	--backtitle "${TITLE}" \
404	--no-cancel \
405	--ok-label "Weiter" \
406	--stdout \
407	--menu "Konfiguration" 14 70 5 \
408	"1" "AutoSta_LX installieren" \
409	"2" "Uebersicht gefundener Laufwerke" \
410	"3" "Beenden und neustarten" \
411	"4" "Beenden und eine Shell starten")
412	RES=$?
413	[[ ${RES} -eq 1 ]] && exit 1
414	if [[ ${RES} -eq 0 ]]
415	then
416	case ${METHOD} in
417	"1") dialog_setup_system_menu ;;
418	"2") dialog_hardware_detection ;;
419	"3") install_do_reboot ;;
420	"4") /bin/bash --login -i ;;
421	esac
422	fi
423	done
424	}
425
426	#################################################
427	# Install Komandos #
428	#################################################
429	run_hardware_detection()
430	{
431	# check for special devices/clients:
432	# if zotac a zotac and the disk is a removeable device, then add rootdelay to kernelcmd
433	local removable=0
434	if [[ ! -z $(lspci -v \| grep -i zotac) ]]
435	then
436	for i in /sys/block/[hs]d*/removable
437	do
438	if [[ $(< ${i}) = 1 ]]
439	then
440	removable=1
441	fi
442	done
443
444	export KERNELOPTS="${KERNELOPTS} rootdelay=8"
445	export SPECIALDEVICE="zotac"
446	fi
447	}
448
449	setup_hdd_partitions_auto()
450	{
451	ROOTHDD="${HDD}1"
452
453	## delete disk
454	dd if=/dev/zero of=${HDD} count=1 &> /dev/null \|\| die
455
456	## setup one bootable partition
457	#1. n= new disk
458	#2. p= primary disk
459	#3. 1= first partition
460	#4. ''= default sector start
461	#5. ''= defaul sector end
462	#6. a= bootable flag
463	#7. 1= boot flag for partition 1
464	#8. w= write/quit
465	fdisk ${HDD} &> /dev/null << EOF
466	n
467	p
468	1
469
470
471	a
472	1
473	w
474	EOF
475	}
476
477	setup_hdd_partitions_manuell()
478	{
479	BOOTHDD="${HDD}1"
480	SWAPHDD="${HDD}2"
481	ROOTHDD="${HDD}3"
482
483	## hdds partitionieren manuell
484	cfdisk ${HDD} \|\| die
485	}
486
487	setup_hdd_partitions_manuell_flash()
488	{
489	ROOTHDD="${HDD}1"
490
491	## hdds partitionieren manuell
492	cfdisk ${HDD} \|\| die
493	}
494
495	setup_hdd_format()
496	{
497	mkswap ${SWAPHDD} \|\| die
498	mke2fs -j -q ${BOOTHDD} \|\| die
499	mke2fs -j -q ${ROOTHDD} \|\| die
500	}
501
502	setup_hdd_format_flash()
503	{
504	mke2fs -j -q ${ROOTHDD} \|\| die
505	}
506
507	install_mount_rootfs()
508	{
509	swapon ${SWAPHDD} \|\| die
510	mount ${ROOTHDD} ${INSTALLPATH} \|\| die
511	install -d ${INSTALLPATH}/boot \|\| die
512	mount ${BOOTHDD} ${INSTALLPATH}/boot \|\| die
513	cd ${INSTALLPATH} \|\| die
514	}
515
516	install_mount_rootfs_flash()
517	{
518	mount ${ROOTHDD} ${INSTALLPATH} \|\| die
519	install -d ${INSTALLPATH}/boot \|\| die
520	cd ${INSTALLPATH} \|\| die
521	}
522
523	install_system_image()
524	{
525	tar xvjpf ${CDPATH}/system/${CDIMAGENAME} -C ${INSTALLPATH}
526	}
527
528	install_bootsector_chroot()
529	{
530	local my_roothdd
531
532	### grubconf schreiben
533	source ${INSTALLPATH}/boot/kernelversion
534
535	#for alx only
536	if [ -e ${INSTALLPATH}/etc/alx_version ]
537	then
538	OLD_ALXVER="${ALXVER}"
539	source ${INSTALLPATH}/etc/alx_version
540	KRNVER="ALX-${ALXVER}"
541	ALXVER="${OLD_ALXVER}"
542	fi
543
544	[[ -z ${KRNVER} ]] && KRNVER="AutoSta_LX"
545	[[ -z ${KRNINITRD} ]] && KRNINITRD="initrd"
546	[[ -z ${KRNIMG} ]] && KRNIMG="vmlinuz"
547
548	# uuid support
549	if is_uuid_supported
550	then
551	my_roothdd="UUID=$(get_uuid ${ROOTHDD})"
552	else
553	my_roothdd="${ROOTHDD}"
554	fi
555
556	local grubconf=${INSTALLPATH}/boot/grub/grub.conf
557	: > ${grubconf} \|\| die
558	echo "default 0" >> ${grubconf} \|\| die
559	echo "timeout 3" >> ${grubconf} \|\| die
560	# using current root password
561	echo "password --md5 $(cat ${INSTALLPATH}/etc/shadow \| grep root \| cut -d: -f2)" >> ${grubconf} \|\| die
562
563	echo >> ${grubconf} \|\| die
564	echo "# normal boot" >> ${grubconf} \|\| die
565	echo "title ${KRNVER}" >> ${grubconf} \|\| die
566	echo "root (hd0,0)" >> ${grubconf} \|\| die
567	echo "kernel /boot/${KRNIMG} root=${my_roothdd} ${KERNELOPTS}" >> ${grubconf} \|\| die
568	if is_initrd_supported
569	then
570	echo "initrd /boot/${KRNINITRD}" >> ${grubconf} \|\| die
571	fi
572
573	echo >> ${grubconf} \|\| die
574	echo "# admin boot" >> ${grubconf} \|\| die
575	echo "title ${KRNVER} - Re-run hardware-detection" >> ${grubconf} \|\| die
576	echo "lock" >> ${grubconf} \|\| die
577	echo "root (hd0,0)" >> ${grubconf} \|\| die
578	echo "kernel /boot/${KRNIMG} root=${my_roothdd} ${KERNELOPTS} hardware-auto-detection" >> ${grubconf} \|\| die
579	if is_initrd_supported
580	then
581	echo "initrd /boot/${KRNINITRD}" >> ${grubconf} \|\| die
582	fi
583
584	echo >> ${grubconf} \|\| die
585	echo "title ${KRNVER} - Reset all local settings" >> ${grubconf} \|\| die
586	echo "lock" >> ${grubconf} \|\| die
587	echo "root (hd0,0)" >> ${grubconf} \|\| die
588	echo "kernel /boot/${KRNIMG} root=${my_roothdd} ${KERNELOPTS} alx-reset-settings" >> ${grubconf} \|\| die
589	if is_initrd_supported
590	then
591	echo "initrd /boot/${KRNINITRD}" >> ${grubconf} \|\| die
592	fi
593
594	# bootsector schreiben chrooted schreiben (lfs/magellan)
595	cat > ${INSTALLPATH}/root/.bashrc << CHROOTEOF
596	/usr/sbin/grub --no-floppy --batch << "EOF" 1> /dev/null 2> /dev/null
597	root (hd0,0)
598	setup (hd0)
599	quit
600	EOF
601	exit 0
602	CHROOTEOF
603
604	## enters chroot
605	mount -t proc proc ${INSTALLPATH}/proc
606	mount -t sysfs sysfs ${INSTALLPATH}/sys
607	mount -o bind /dev ${INSTALLPATH}/dev
608	chroot ${INSTALLPATH} /bin/bash --rcfile /root/.bashrc -i
609	umount ${INSTALLPATH}/proc
610	umount ${INSTALLPATH}/sys
611	umount ${INSTALLPATH}/dev
612	rm ${INSTALLPATH}/root/.bashrc
613	}
614
615	is_initrd_supported()
616	{
617	# only generate initrds if the cmd exists
618	[[ -x ${INSTALLPATH}/sbin/mkinitrd ]] && return 0
619	return 1
620	}
621
622	install_initrd_chroot()
623	{
624	# only generate initrds if the cmd exists
625	is_initrd_supported \|\| return 0
626
627	cat > ${INSTALLPATH}/root/.bashrc << CHROOTEOF
628	echo "MODULES=\"ext3 amd74xx piix sis5513 via82cxxx sd_mod ata_piix pata_amd pata_mpiix pata_oldpiix pata_sis pata_via sata_via sata_sis sata_nv\"" > /etc/conf.d/mkinitrd
629	mkinitrd -f /boot/$(readlink /boot/initrd) $(readlink /boot/vmlinuz \| sed "s:kernel-::g") > /dev/null
630	exit 0
631	CHROOTEOF
632
633	## enters chroot
634	mount -t proc proc ${INSTALLPATH}/proc
635	mount -t sysfs sysfs ${INSTALLPATH}/sys
636	mount -o bind /dev ${INSTALLPATH}/dev
637	chroot ${INSTALLPATH} /bin/bash --rcfile /root/.bashrc -i
638	umount ${INSTALLPATH}/proc
639	umount ${INSTALLPATH}/sys
640	umount ${INSTALLPATH}/dev
641	rm ${INSTALLPATH}/root/.bashrc
642	}
643
644	is_uuid_supported()
645	{
646	if [[ -x $(which busybox.mkinitrd &> /dev/null) ]]
647	then
648	# only detect uuids if supported
649	if [[ ! -z $(busybox.mkinitrd \| grep blkid) ]]
650	then
651	return 0
652	fi
653	fi
654
655	return 1
656	}
657
658	get_uuid()
659	{
660	local UUID
661	local SEC_TYPE
662	local TYPE
663
664	local dev="$1"
665	[[ -z ${dev} ]] && die "no dev given"
666
667	# check if given device is already an UUID
668	if [[ ${dev/UUID=/}x != ${dev}x ]]
669	then
670	eval "${dev}"
671	else
672	eval $(busybox.mkinitrd blkid ${dev} \| grep "${dev}:" \| sed 's/.*:\ //')
673	fi
674	echo "${UUID}"
675	}
676
677	install_system_settings()
678	{
679	# schreibe fstab
680	if is_uuid_supported
681	then
682	echo -e "UUID=$(get_uuid ${BOOTHDD})\t/boot\text3\tnoatime,noauto\t1 1" > ${INSTALLPATH}/etc/fstab \|\| die
683	echo -e "UUID=$(get_uuid ${ROOTHDD})\t/\text3\tnoatime\t0 0" >> ${INSTALLPATH}/etc/fstab \|\| die
684	else
685	echo -e "${BOOTHDD}\t/boot\text3\tnoatime,noauto\t1 1" > ${INSTALLPATH}/etc/fstab \|\| die
686	echo -e "${ROOTHDD}\t/\text3\tnoatime\t0 0" >> ${INSTALLPATH}/etc/fstab \|\| die
687	fi
688	# not needed busybox loads all with swapon -a, even if not mentioned in fstab
689	#echo -e "UUID='$(get_uuid ${SWAPHDD})'\tswap\tswap\tpri=1\t0 0" >> ${INSTALLPATH}/etc/fstab \|\| die
690	echo -e "proc\t/proc\tproc\tdefaults\t0 0" >> ${INSTALLPATH}/etc/fstab \|\| die
691	echo -e "shm\t/dev/shm\ttmpfs\tdefaults\t0 0" >> ${INSTALLPATH}/etc/fstab \|\| die
692
693	# install network config skeleton
694	install -m0644 ${INSTALLPATH}/etc/alxconfig-ng/skel/net/net.eth0 ${INSTALLPATH}/etc/conf.d/ \|\| die
695	}
696
697	install_system_settings_flash()
698	{
699	# schreibe fstab
700	if is_uuid_supported
701	then
702	echo -e "UUID=$(get_uuid ${ROOTHDD})\t/\text3\tnoatime\t0 0" > ${INSTALLPATH}/etc/fstab \|\| die
703	else
704	echo -e "${ROOTHDD}\t/\text3\tnoatime\t0 0" > ${INSTALLPATH}/etc/fstab \|\| die
705	fi
706	echo -e "proc\t/proc\tproc\tdefaults\t0 0" >> ${INSTALLPATH}/etc/fstab \|\| die
707	echo -e "shm\t/dev/shm\ttmpfs\tdefaults\t0 0" >> ${INSTALLPATH}/etc/fstab \|\| die
708	}
709
710	install_umount_rootfs()
711	{
712	cd /
713	umount ${INSTALLPATH}/boot \|\| die
714	umount ${INSTALLPATH} \|\| die
715	swapoff ${SWAPHDD} \|\| die
716	}
717
718	install_umount_rootfs_flash()
719	{
720	cd /
721	umount ${INSTALLPATH} \|\| die
722	}
723
724	install_do_reboot()
725	{
726	reboot
727	}
728
729	#################################################
730	# Install Ablauf Scripte #
731	#################################################
732
733	run_install_normal()
734	{
735	dialog_hardware_detection
736
737	dialog_setup_hdd_partitions_manuell
738	dialog_setup_hdd_format
739	setup_hdd_format > /dev/null
740	install_mount_rootfs
741	(install_system_image > /tmp/install.log) 2> /tmp/install_errors.log \| dialog_install_meter \| dialog_install_system_image
742
743	dialog_install_bootsector
744	install_bootsector_chroot
745
746	dialog_install_settings
747	sleep 1
748	install_system_settings
749	install_initrd_chroot
750	install_umount_rootfs
751	dialog_install_successful
752	}
753
754	run_install_flash()
755	{
756	dialog_hardware_detection
757
758	dialog_setup_hdd_partitions_manuell_flash
759	dialog_setup_hdd_format
760	setup_hdd_format_flash > /dev/null
761	install_mount_rootfs_flash
762	(install_system_image > /tmp/install.log) 2> /tmp/install_errors.log \| dialog_install_meter \| dialog_install_system_image
763
764	dialog_install_bootsector
765	install_bootsector_chroot
766
767	dialog_install_settings
768	sleep 1
769	install_system_settings_flash
770	install_initrd_chroot
771	install_umount_rootfs_flash
772	dialog_install_successful
773	}
774
775	run_install_auto()
776	{
777	dialog_hardware_detection
778
779	dialog_setup_hdd_partitions_auto
780	dialog_setup_hdd_format
781	setup_hdd_format_flash > /dev/null
782	install_mount_rootfs_flash
783	(install_system_image > /tmp/install.log) 2> /tmp/install_errors.log \| dialog_install_meter \| dialog_install_system_image
784
785	dialog_install_bootsector
786	install_bootsector_chroot
787
788	dialog_install_settings
789	sleep 1
790	install_system_settings_flash
791	install_initrd_chroot
792	install_umount_rootfs_flash
793	dialog_install_successful
794	}
795
796	dialog_main
797
798	exit 0