Contents of /alx-src/trunk/tinyalxconfig-ng/init.d/alxsettings
Parent Directory | Revision Log
Revision 391 -
(show annotations)
(download)
Wed Jun 4 18:02:00 2008 UTC (16 years ago) by niro
File size: 21696 byte(s)
Wed Jun 4 18:02:00 2008 UTC (16 years ago) by niro
File size: 21696 byte(s)
-do not rely on hwdetect script, running hwsetup nativly
1 | #!/bin/bash |
2 | |
3 | # <niro@magellan-linux.de> |
4 | |
5 | #%rlevels: 7:s 0:k 6:k |
6 | #%start: 41 |
7 | #%stop: 01 |
8 | |
9 | #deps |
10 | #%needs: |
11 | #%before: |
12 | #%after: |
13 | |
14 | # $Header: /home/cvsd/alx-cvs/alx-src/tinyalxconfig-ng/init.d/alxsettings,v 1.4 2008-06-04 18:02:00 niro Exp $ |
15 | |
16 | # checks first if the client was already configured and if it has an valid serial |
17 | # if not it runs the autoconfiguration script |
18 | # these settings will be used for client setup |
19 | # |
20 | # if client was valid it first will check if his settings against the server |
21 | # if no changes are at server side they will be kept, if yes the get updated. |
22 | # the server settings has higher priority. |
23 | |
24 | source /etc/sysconfig/rc |
25 | source $rc_functions |
26 | |
27 | # mysql settings |
28 | source /etc/alxconfig-ng/config.rc |
29 | |
30 | # helper functions |
31 | source /usr/lib/alxconfig-ng/functions/mysqlfunctions |
32 | source /usr/lib/alxconfig-ng/functions/serial_functions |
33 | source /usr/lib/alxconfig-ng/functions/config_modules |
34 | source /usr/lib/alxconfig-ng/functions/config_network |
35 | source /usr/lib/alxconfig-ng/functions/config_printers |
36 | source /usr/lib/alxconfig-ng/functions/config_sessions |
37 | source /usr/lib/alxconfig-ng/functions/config_x11 |
38 | source /usr/lib/alxconfig-ng/functions/config_auth |
39 | source /usr/lib/alxconfig-ng/functions/config_ssh_auth |
40 | |
41 | # check if mysql is available |
42 | [ -x /usr/bin/mysql ] && MYSQL_ALX=true |
43 | |
44 | # other needed vars |
45 | ALX_HW_DETECT=false |
46 | ALX_FORCED_RECHECK=false |
47 | ALX_RESET_SETTINGS=false |
48 | ALX_CONFD_NETWORKING=false |
49 | |
50 | # unset vars which may kill us |
51 | unset ALX_SERIAL ALX_STATE |
52 | |
53 | |
54 | # setup needed directories |
55 | [ ! -d /etc/alxconfig-ng/state ] && install -d /etc/alxconfig-ng/state |
56 | |
57 | |
58 | # read_cmdline ${item} |
59 | read_cmdline() |
60 | { |
61 | local i |
62 | |
63 | for i in $(< /proc/cmdline) |
64 | do |
65 | [[ ${i} = $1 ]] && return 0 |
66 | done |
67 | |
68 | return 1 |
69 | } |
70 | |
71 | update_system_settings() |
72 | { |
73 | echo -e ${COLMAGENTA}"Checking system setup ..."${COLDEFAULT} |
74 | |
75 | # get the modules settings |
76 | # ! is the first thing that must be configured ! |
77 | config_modules |
78 | |
79 | # imports network settings from db |
80 | config_networking |
81 | |
82 | # imports x11 settings from db |
83 | config_x11 |
84 | |
85 | # imports session settings from db |
86 | config_sessions |
87 | |
88 | # imports printer settings from db |
89 | config_printing |
90 | |
91 | # imports auth settings from db |
92 | config_auth |
93 | |
94 | # exchange ssh rsa keys |
95 | HOME=/root config_ssh_auth |
96 | } |
97 | |
98 | get_system_serial() |
99 | { |
100 | local CUR_IP CUR_MAC CUR_MTIME ALX_IFACE |
101 | |
102 | if [[ ${ALX_CONFD_NETWORKING} = true ]] |
103 | then |
104 | ALX_IFACE="$(< ${SETTINGSPATH}/confd-networking)" |
105 | else |
106 | ALX_IFACE="eth0" |
107 | fi |
108 | |
109 | # check if serial file exists |
110 | if [ -f /etc/alxconfig-ng/serial ] && [[ ${ALX_FORCED_RECHECK} = false ]] |
111 | then |
112 | source /etc/alxconfig-ng/serial |
113 | |
114 | # start preliminary networking (dhcp) |
115 | preliminary_network start |
116 | |
117 | # check if mysql server is reachable |
118 | # if not abort this script |
119 | if ! reach_mysql_server |
120 | then |
121 | preliminary_network stop |
122 | exit 1 |
123 | fi |
124 | |
125 | CUR_IP=$(/sbin/ifconfig ${ALX_IFACE} | sed -n '/addr:/s/ [^r]*..//gp') |
126 | CUR_MAC=$(/sbin/ifconfig ${ALX_IFACE} | grep HWaddr | cut -d ' ' -f11) |
127 | CUR_MTIME=$(date +%s) |
128 | |
129 | echo -e ${COLOREDSTAR} "Trying to validate my serial ..." |
130 | |
131 | # nice serial output |
132 | $CURS_UP |
133 | $SET_WCOL |
134 | echo "[ SN: ${ALX_SERIAL} ]" |
135 | |
136 | if validate_serial "${ALX_SERIAL}" "${ALX_REG_DATE}" "${CUR_MAC}" |
137 | then |
138 | ALX_STATE="ok" |
139 | else |
140 | # abort on non valid serial |
141 | ALX_STATE="invalid serial" |
142 | echo "ALX_STATE=${ALX_STATE}" > /etc/alxconfig-ng/state/state |
143 | show_invalid_serial_msg |
144 | exit 1 |
145 | fi |
146 | |
147 | else |
148 | # run hardware detection |
149 | echo |
150 | if [[ ${ALX_FORCED_RECHECK} = true ]] |
151 | then |
152 | echo -e ${COLMAGENTA}"Hardware autodetection forced by system-administrator"${COLDEFAULT} |
153 | else |
154 | echo -e ${COLMAGENTA}"Preparing system for first boot"${COLDEFAULT} |
155 | fi |
156 | # cleaning up old data-crap |
157 | if [ -d /etc/sysconfig/hwsetup ] |
158 | then |
159 | echo -e ${COLOREDSTAR}"Cleaning up old data ..." |
160 | rm -f /etc/sysconfig/hwsetup/* |
161 | fi |
162 | echo -en "${COLOREDSTAR}";hwsetup -p > /dev/null |
163 | |
164 | # set hostname to alx_default_hostname |
165 | # use old hostname if this is a forced re-check |
166 | [[ ${ALX_FORCED_RECHECK} = true ]] && ALX_DEFAULT_HOSTNAME="$(< /etc/hostname)" |
167 | [ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx |
168 | HOSTNAME="${ALX_DEFAULT_HOSTNAME}" |
169 | |
170 | # update the hostname on the system for sure |
171 | echo "${HOSTNAME}" > /etc/hostname |
172 | |
173 | # start preliminary networking (dhcp) |
174 | preliminary_network start |
175 | |
176 | # check if mysql server is reachable |
177 | # if not abort this script |
178 | if ! reach_mysql_server |
179 | then |
180 | preliminary_network stop |
181 | exit 1 |
182 | fi |
183 | |
184 | CUR_IP=$(/sbin/ifconfig eth0 | sed -n '/addr:/s/ [^r]*..//gp') |
185 | CUR_MAC=$(/sbin/ifconfig eth0 | grep HWaddr | cut -d ' ' -f11) |
186 | CUR_MTIME=$(date +%s) |
187 | |
188 | # abort now if this is a forced re-check |
189 | if [[ ${ALX_FORCED_RECHECK} = true ]] |
190 | then |
191 | # but first check the serial |
192 | source /etc/alxconfig-ng/serial |
193 | |
194 | echo -e ${COLOREDSTAR} "Trying to validate my serial ..." |
195 | |
196 | # nice serial output |
197 | $CURS_UP |
198 | $SET_WCOL |
199 | echo "[ SN: ${ALX_SERIAL} ]" |
200 | |
201 | if validate_serial "${ALX_SERIAL}" "${ALX_REG_DATE}" "${CUR_MAC}" |
202 | then |
203 | ALX_STATE="ok" |
204 | else |
205 | # abort on non valid serial |
206 | ALX_STATE="invalid serial" |
207 | echo "ALX_STATE=${ALX_STATE}" > /etc/alxconfig-ng/state/state |
208 | show_invalid_serial_msg |
209 | exit 1 |
210 | fi |
211 | |
212 | # write current state to temp file |
213 | echo "ALX_STATE=${ALX_STATE}" > /etc/alxconfig-ng/state/state |
214 | [ -f /hardware-auto-detection ] && rm /hardware-auto-detection |
215 | |
216 | # now export ALX_FORCED_RECHECK=true |
217 | # that the setting will be updated not inserted ! |
218 | export ALX_FORCED_RECHECK=true |
219 | return 0 |
220 | fi |
221 | |
222 | echo -e ${COLOREDSTAR} "Trying to get new serial ..." |
223 | |
224 | # request a new serial; one command now (cause must be done in the same session) |
225 | ALX_SERIAL=$(mysqldo "insert into client_serials (mtime, mac) values('${CUR_MTIME}','${CUR_MAC}'); |
226 | select last_insert_id();") |
227 | |
228 | if [[ ${ALX_SERIAL} != NULL ]] |
229 | then |
230 | # nice serial output |
231 | $CURS_UP |
232 | $SET_WCOL |
233 | echo "[ SN: ${ALX_SERIAL} ]" |
234 | |
235 | # set ALX_STATE to ok so everybody knows that everything was ok |
236 | ALX_STATE=ok |
237 | |
238 | echo "ALX_SERIAL=${ALX_SERIAL}" > /etc/alxconfig-ng/serial |
239 | echo "ALX_REG_DATE=${CUR_MTIME}" >> /etc/alxconfig-ng/serial |
240 | |
241 | evaluate_retval |
242 | else |
243 | # print false (works only if this is the first statement here) |
244 | evaluate_retval |
245 | |
246 | # set ALX_STATE to error so everybody sees there was an error |
247 | ALX_STATE=error |
248 | |
249 | # show an error that no new serial was found |
250 | # nice serial output |
251 | $CURS_UP |
252 | $SET_WCOL |
253 | echo -e "[ SN: ${COLRED}None, 0${COLDEFAULT} ]" |
254 | fi |
255 | fi |
256 | |
257 | # write current state to temp file |
258 | echo "ALX_STATE=${ALX_STATE}" > /etc/alxconfig-ng/state/state |
259 | echo "ALX_IFACE=${ALX_IFACE}" >> /etc/alxconfig-ng/state/state |
260 | } |
261 | |
262 | |
263 | check_is_configured() |
264 | { |
265 | if [ -f /etc/alxconfig-ng/state/configured ] |
266 | then |
267 | export ALX_CONFIGURED=true |
268 | else |
269 | export ALX_CONFIGURED=false |
270 | fi |
271 | } |
272 | |
273 | |
274 | # imports current settings to the database resolved by the hardware detection |
275 | import_settings_to_db() |
276 | { |
277 | # note: networking is always 'dhcp' if hw was autodetected |
278 | # note: default_domain/hostname is set in config.rc |
279 | |
280 | # to be safe, we do some sanity checks |
281 | [ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain |
282 | [ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx |
283 | |
284 | # vars used by hwdetect |
285 | local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME |
286 | local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER |
287 | local MOUSETYPE XMOUSETYPE FULLNAME DEVICE |
288 | |
289 | # get setting from hwdetect |
290 | source /etc/sysconfig/hwsetup/knoppix |
291 | source /etc/sysconfig/hwsetup/mouse |
292 | |
293 | echo |
294 | echo -e ${COLMAGENTA}"Importing detected settings to database"${COLDEFAULT} |
295 | |
296 | # network |
297 | echo -e " Network settings ..." |
298 | if [[ ${ALX_CONFD_NETWORKING} = true ]] |
299 | then |
300 | # get settings |
301 | #source ${rc_base}/init.d/network &> /dev/null |
302 | for iface in $(onboot_interface_list ${network_settings}/net.*) |
303 | do |
304 | [[ $(< ${SETTINGSPATH}/confd-networking) != ${iface} ]] && continue |
305 | echo "WARNING: only importing settings for interface [ ${iface} ] !" |
306 | source ${network_settings}/net.${iface} || exit 1 |
307 | NETCARD_DRIVER="$(cat /etc/modules.d/net.${iface} | cut -d' ' -f3)" |
308 | |
309 | mysqldo "insert into cfg_network( |
310 | hostname, |
311 | serial, |
312 | module, |
313 | domain, |
314 | networking, |
315 | netmask, |
316 | dns, |
317 | gateway, |
318 | broadcast, |
319 | ip, |
320 | forcemacto, |
321 | wireless_bitrate, |
322 | wireless_channel, |
323 | wireless_essid, |
324 | wireless_frequency, |
325 | wireless_mode, |
326 | wireless_nick, |
327 | wireless_auth_mode, |
328 | wireless_key_length, |
329 | wireless_key, |
330 | wireless_key_ascii |
331 | ) |
332 | values( |
333 | '${ALX_DEFAULT_HOSTNAME}', |
334 | '${ALX_SERIAL}', |
335 | '${NETCARD_DRIVER}', |
336 | '${ALX_DEFAULT_DOMAIN}', |
337 | '${NETWORKING}', |
338 | '${NETMASK}', |
339 | '${NAMESERVER}', |
340 | '${GATEWAY}', |
341 | '${BROADCAST}', |
342 | '${IP}', |
343 | '${FORCE_MAC_TO}', |
344 | '${WIRELESS_BITRATE}', |
345 | '${WIRELESS_CHANNEL}', |
346 | '${WIRELESS_ESSID}', |
347 | '${WIRELESS_FREQUENCY}', |
348 | '${WIRELESS_MODE}', |
349 | '${WIRELESS_NICK}', |
350 | '${WIRELESS_AUTH_MODE}', |
351 | '${WIRELESS_KEY_LENGTH}', |
352 | '${WIRELESS_KEY}', |
353 | '${WIRELESS_KEY_ASCII}' |
354 | );" |
355 | |
356 | # only insert the *FIRST* iface |
357 | break |
358 | done |
359 | else |
360 | mysqldo "insert into cfg_network( |
361 | hostname, |
362 | serial, |
363 | module, |
364 | domain, |
365 | networking |
366 | ) |
367 | values( |
368 | '${ALX_DEFAULT_HOSTNAME}', |
369 | '${ALX_SERIAL}', |
370 | '${NETCARD_DRIVER}', |
371 | '${ALX_DEFAULT_DOMAIN}', |
372 | 'dhcp' |
373 | );" |
374 | fi |
375 | evaluate_retval |
376 | |
377 | # xserver |
378 | echo -e " Graphic settings ..." |
379 | # xserver general |
380 | ( mysqldo "insert into cfg_graphic( |
381 | serial, |
382 | module, |
383 | resolution, |
384 | depth, |
385 | monitorid |
386 | ) |
387 | values( |
388 | '${ALX_SERIAL}', |
389 | '${XMODULE}', |
390 | '1024x768', |
391 | '16', |
392 | '0' |
393 | );"; ) |
394 | evaluate_retval |
395 | |
396 | # input |
397 | echo -e " Input settings ..." |
398 | mysqldo "insert into cfg_input(serial,mouse) values('${ALX_SERIAL}','${XMOUSETYPE}');" |
399 | evaluate_retval |
400 | |
401 | # auth |
402 | echo -e " Authentification settings ..." |
403 | mysqldo "insert into client_auth( |
404 | serial, |
405 | username, |
406 | shell, |
407 | vnc, |
408 | samba, |
409 | station |
410 | ) |
411 | values( |
412 | '${ALX_SERIAL}', |
413 | '${ALX_UNPRIV_USER}', |
414 | '', |
415 | '', |
416 | '', |
417 | '' |
418 | );" |
419 | evaluate_retval |
420 | |
421 | # exchange ssh rsa keys - the first boot needs this ! |
422 | # or no reboot will work via the webadmin |
423 | echo -e " SSH authentification settings ..." |
424 | HOME=/root config_ssh_auth |
425 | evaluate_retval |
426 | |
427 | # autostart |
428 | echo -e " Autostart settings ..." |
429 | mysqldo "insert into cfg_autostart(serial,session) values('${ALX_SERIAL}','');" |
430 | |
431 | # screensaver |
432 | echo -e " Screensaver settings ..." |
433 | mysqldo "insert into cfg_screensaver(serial,screensaver) values('${ALX_SERIAL}','')" |
434 | |
435 | evaluate_retval |
436 | } |
437 | |
438 | # imports current settings to the database resolved by the hardware detection |
439 | update_settings_in_db() |
440 | { |
441 | # note: networking is always 'dhcp' if hw was autodetected |
442 | # note: default_domain/hostname is set in config.rc or exported |
443 | # note: we updating only hardware settings here ! |
444 | |
445 | # to be safe, we do some sanity checks |
446 | [ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain |
447 | [ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx |
448 | |
449 | # vars used by hwdetect |
450 | local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME |
451 | local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER |
452 | local MOUSETYPE XMOUSETYPE FULLNAME DEVICE |
453 | |
454 | # get setting from hwdetect |
455 | source /etc/sysconfig/hwsetup/knoppix |
456 | source /etc/sysconfig/hwsetup/mouse |
457 | |
458 | echo |
459 | echo -e ${COLMAGENTA}"Updating detected settings in database"${COLDEFAULT} |
460 | |
461 | # network |
462 | echo -e " Network settings ..." |
463 | if [[ ${ALX_CONFD_NETWORKING} = true ]] |
464 | then |
465 | # get settings |
466 | #source ${rc_base}/init.d/network &> /dev/null |
467 | for iface in $(onboot_interface_list ${network_settings}/net.*) |
468 | do |
469 | [[ $(< ${SETTINGSPATH}/confd-networking) != ${iface} ]] && continue |
470 | echo "WARNING: only importing settings for interface [ ${iface} ] !" |
471 | source ${network_settings}/net.${iface} || exit 1 |
472 | NETCARD_DRIVER="$(cat /etc/modules.d/net.${iface} | cut -d' ' -f3)" |
473 | |
474 | mysqldo "update cfg_network set |
475 | hostname='${ALX_DEFAULT_HOSTNAME}', |
476 | module='${NETCARD_DRIVER}', |
477 | domain='${ALX_DEFAULT_DOMAIN}', |
478 | networking='${NETWORKING}', |
479 | netmask='${NETMASK}', |
480 | dns='${NAMESERVER}', |
481 | gateway='${GATEWAY}', |
482 | broadcast='${BROADCAST}', |
483 | ip='${IP}', |
484 | forcemacto='${FORCE_MAC_TO}', |
485 | wireless_bitrate='${WIRELESS_BITRATE}', |
486 | wireless_channel='${WIRELESS_CHANNEL}', |
487 | wireless_essid='${WIRELESS_ESSID}', |
488 | wireless_frequency='${WIRELESS_FREQUENCY}', |
489 | wireless_mode='${WIRELESS_MODE}', |
490 | wireless_nick='${WIRELESS_NICK}', |
491 | wireless_auth_mode='${WIRELESS_AUTH_MODE}', |
492 | wireless_key_length='${WIRELESS_KEY_LENGTH}', |
493 | wireless_key='${WIRELESS_KEY}', |
494 | wireless_key_ascii='${WIRELESS_KEY_ASCII}' |
495 | where serial=${ALX_SERIAL};" |
496 | |
497 | # only insert the *FIRST* iface |
498 | break |
499 | done |
500 | else |
501 | mysqldo "update cfg_network set |
502 | hostname='${ALX_DEFAULT_HOSTNAME}', |
503 | module='${NETCARD_DRIVER}', |
504 | domain='${ALX_DEFAULT_DOMAIN}', |
505 | networking='dhcp' |
506 | where serial=${ALX_SERIAL};" |
507 | fi |
508 | evaluate_retval |
509 | |
510 | # xserver |
511 | echo -e " Graphic settings ..." |
512 | # xserver general |
513 | mysqldo "update cfg_graphic set |
514 | module='${XMODULE}', |
515 | resolution='1024x768', |
516 | depth='16', |
517 | monitorid='0' |
518 | where serial=${ALX_SERIAL};" |
519 | evaluate_retval |
520 | |
521 | # input |
522 | echo -e " Input settings ..." |
523 | mysqldo "update cfg_input set mouse='${XMOUSETYPE}' where serial=${ALX_SERIAL};" |
524 | evaluate_retval |
525 | } |
526 | |
527 | # imports current settings to the local system resolved by the hardware detection |
528 | # we only need the network settings |
529 | import_settings_local() |
530 | { |
531 | # note: networking is always 'dhcp' if hw was autodetected |
532 | # note: default_domain/hostname is set in config.rc |
533 | |
534 | # to be safe, we do some sanity checks |
535 | [ -z "${ALX_DEFAULT_DOMAIN}" ] && ALX_DEFAULT_DOMAIN=localdomain |
536 | [ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx |
537 | |
538 | # vars used by hwdetect |
539 | local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME |
540 | local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER |
541 | local MOUSETYPE XMOUSETYPE FULLNAME DEVICE |
542 | |
543 | # get setting from hwdetect |
544 | source /etc/sysconfig/hwsetup/knoppix |
545 | |
546 | echo |
547 | echo -e ${COLMAGENTA}"Importing detected settings to local system"${COLDEFAULT} |
548 | |
549 | if [[ ${ALX_CONFD_NETWORKING} = false ]] |
550 | then |
551 | #[ ! -d ${SETTINGSPATH} ] && install -d ${SETTINGSPATH} |
552 | #echo "${NETCARD_DRIVER}" > ${SETTINGSPATH}/modules |
553 | |
554 | # set an device alias for modprobe.conf |
555 | [ ! -d /etc/modules.d ] && install -d /etc/modules.d |
556 | echo "alias eth0 ${NETCARD_DRIVER}" > /etc/modules.d/net.eth0 |
557 | |
558 | # regenerate modprobe.conf |
559 | [ -x $(which modules-update) ] && modules-update || echo "cannot regen modprobe.conf" |
560 | evaluate_retval |
561 | fi |
562 | |
563 | # set system state to 'already configured' |
564 | touch /etc/alxconfig-ng/state/configured |
565 | |
566 | # if only an recheck was forced than abort now |
567 | [[ ${ALX_FORCED_RECHECK} = true ]] && return 0 |
568 | |
569 | # create a fresh fluxbox directory |
570 | [ -d ${ALX_UNPRIV_HOME}/.fluxbox ] && rm -rf ${ALX_UNPRIV_HOME}/.fluxbox |
571 | install -d ${ALX_UNPRIV_HOME}/.fluxbox |
572 | |
573 | # now generate fluxbox config files |
574 | |
575 | # fluxbox main config |
576 | cat ${ALX_SKELETONS}/fluxbox/init \ |
577 | > ${ALX_UNPRIV_HOME}/.fluxbox/init |
578 | |
579 | # fluxbox autostart |
580 | cat ${ALX_SKELETONS}/fluxbox/apps \ |
581 | > ${ALX_UNPRIV_HOME}/.fluxbox/apps |
582 | |
583 | # fluxbox menu header |
584 | cat ${ALX_SKELETONS}/fluxbox/menu.header \ |
585 | > ${ALX_UNPRIV_HOME}/.fluxbox/menu |
586 | |
587 | # now fix it with proper messages :P |
588 | local ver="$(< /etc/mageversion)" |
589 | sed -i "s:@CHANGEME@:alx-${ver} #${ALX_SERIAL}:g" \ |
590 | ${ALX_UNPRIV_HOME}/.fluxbox/menu |
591 | |
592 | # add a newline (maybe there is no crlf in the header) |
593 | echo >> ${ALX_UNPRIV_HOME}/.fluxbox/menu |
594 | |
595 | # fluxbox menu footer |
596 | cat ${ALX_SKELETONS}/fluxbox/menu.footer \ |
597 | >> ${ALX_UNPRIV_HOME}/.fluxbox/menu |
598 | |
599 | # add a newline (maybe there is no crlf in the footer) |
600 | echo >> ${ALX_UNPRIV_HOME}/.fluxbox/menu |
601 | |
602 | |
603 | # setup some standart icons (sysinfo.lnk) |
604 | # basic config |
605 | cat ${ALX_SKELETONS}/xtdesktop/xtdeskrc > ${ALX_UNPRIV_HOME}/.xtdeskrc |
606 | |
607 | # clean desktop icon location |
608 | [ -d ${ALX_UNPRIV_HOME}/.xtdesktop ] && rm -rf ${ALX_UNPRIV_HOME}/.xtdesktop |
609 | install -d ${ALX_UNPRIV_HOME}/.xtdesktop |
610 | |
611 | # last but not least gen a icon with some sys informations |
612 | local sysinfo |
613 | local osversion |
614 | local xres |
615 | local yres |
616 | |
617 | osversion="$(< /etc/mageversion)" |
618 | sysinfo="Hostname: ${ALX_DEFAULT_HOSTNAME} Serial: #${ALX_SERIAL} OS: alx-${osversion} Kernel: $(uname -r)" |
619 | |
620 | # at first boot we got always a resolution of 1024x768-16@60 |
621 | # middle of the screen |
622 | # (no txt - length required, xtdesk manage that itself) |
623 | xres="$((1024 / 2))" |
624 | # default y pos (full yres -22 !) |
625 | yres="$((768 - 22 ))" |
626 | |
627 | generate_icon \ |
628 | --name "${sysinfo}" \ |
629 | --command "exit 0" \ |
630 | --icon "${ALX_SESSIONS_ICONS}/sysinfo.png" \ |
631 | --dest "${ALX_UNPRIV_HOME}/.xtdesktop/sysinfo.lnk" \ |
632 | --xres "${xres}" \ |
633 | --yres "${yres}" \ |
634 | --icon-width "1" \ |
635 | --icon-height "1" |
636 | |
637 | # create a xinitrc |
638 | echo "exec startfluxbox" > ${ALX_UNPRIV_HOME}/.xinitrc |
639 | |
640 | # set correct permissions |
641 | chown ${ALX_UNPRIV_USER}:${ALX_UNPRIV_GROUP} ${ALX_UNPRIV_HOME} |
642 | chown ${ALX_UNPRIV_USER}:${ALX_UNPRIV_GROUP} ${ALX_UNPRIV_HOME}/.fluxbox |
643 | chmod 0755 ${ALX_UNPRIV_HOME}/.fluxbox |
644 | chmod 0755 ${ALX_UNPRIV_HOME}/.xtdesktop |
645 | chmod 0644 ${ALX_UNPRIV_HOME}/.xtdeskrc |
646 | chmod 0644 ${ALX_UNPRIV_HOME}/.xinitrc |
647 | } |
648 | |
649 | # start|stop |
650 | preliminary_network() |
651 | { |
652 | case $1 in |
653 | start) |
654 | # keeping like always safe: |
655 | # no network should be started here |
656 | ${rc_base}/init.d/network stop |
657 | |
658 | echo -e ${COLMAGENTA}"Starting preliminary networking ... "${COLDEFAULT} |
659 | # start network configured from /etc/conf.d |
660 | ${rc_base}/init.d/network start |
661 | ;; |
662 | |
663 | stop) |
664 | echo -e ${COLMAGENTA}"Stopping preliminary networking ... "${COLDEFAULT} |
665 | ${rc_base}/init.d/network stop |
666 | ;; |
667 | |
668 | *) |
669 | echo "Usage: preliminary_network {start|stop}" |
670 | ;; |
671 | esac |
672 | } |
673 | |
674 | reset_system_settings() |
675 | { |
676 | # force load of de kbdkeys |
677 | loadkeys -q de |
678 | echo |
679 | echo -en ${COLRED} |
680 | echo -n "*** Warning: you are about to reset *all* local settings on this system!" |
681 | echo -e ${COLDEFAULT} |
682 | echo "*** Do you really want to continue ?" |
683 | echo -n "*** Enter 'yes' to continue, anything else to abort: " |
684 | read kbinsert |
685 | if [[ ${kbinsert} = yes ]] |
686 | then |
687 | echo -en ${COLRED} |
688 | echo -n "*** OK, you really want it ... killing all settings: " |
689 | for i in 3 2 1 now |
690 | do |
691 | echo -n " ${i}" |
692 | sleep 1 |
693 | done |
694 | echo -e ${COLDEFAULT} |
695 | |
696 | ## reset all settings: |
697 | rm -rf ${SETTINGSPATH}/* |
698 | rm -f /etc/alxconfig-ng/serial |
699 | rm -rf /etc/alxconfig-ng/state |
700 | |
701 | # clear all printers & net-shares |
702 | :> /etc/cups/printers.conf |
703 | :> /etc/samba/smb.conf |
704 | |
705 | # remove inetd, cups & smb from init |
706 | rc-config del inetd &> /dev/null |
707 | rc-config del cups &> /dev/null |
708 | rc-config del samba &> /dev/null |
709 | |
710 | # remove all user settings |
711 | [ -d ${ALX_UNPRIV_HOME} ] && rm -rf ${ALX_UNPRIV_HOME} |
712 | |
713 | # remove all ica-sessions |
714 | find ${ALX_ICA_SESSIONS} -type f -name '*.ica' | xargs rm |
715 | |
716 | # remove all old nics and modules configs |
717 | find /etc/conf.d -type f -name 'net.*' | xargs rm |
718 | find /etc/modules.d -type f -name 'net.*' | xargs rm |
719 | |
720 | # restore default networking |
721 | cat ${ALX_SKELETONS}/net/net.eth0 > /etc/conf.d/net.eth0 |
722 | |
723 | echo "I am done now, press [Enter] to reboot system ..." |
724 | else |
725 | echo "Aborted, press [Enter] to reboot system ..." |
726 | fi |
727 | read |
728 | reboot |
729 | } |
730 | |
731 | onboot_interface_list() |
732 | { |
733 | local file |
734 | local devices |
735 | local iface |
736 | |
737 | # get list of all devices |
738 | for file in $@ |
739 | do |
740 | if [[ $(read_value ONBOOT ${file}) = yes ]] |
741 | then |
742 | iface="$(basename ${file} | sed s/net.//)" |
743 | # exclude backup files |
744 | case "${iface}" in |
745 | *~) ;; |
746 | *) devices="${devices} $(basename ${file} | sed s/net.//)" ;; |
747 | esac |
748 | fi |
749 | done |
750 | |
751 | echo "${devices}" |
752 | } |
753 | |
754 | # read values from net.* files |
755 | read_value() |
756 | { |
757 | local var="$1" |
758 | local file="$2" |
759 | local value |
760 | |
761 | # local all possible vars |
762 | # global |
763 | local ONBOOT |
764 | local NETWORKING |
765 | |
766 | # static |
767 | local IP |
768 | local NETMASK |
769 | local BROADCAST |
770 | local NETWORKING |
771 | local FORCE_MAC_TO |
772 | |
773 | # dhcp |
774 | local DHCP_PROG |
775 | local DHCP_START |
776 | local DHCP_STOP |
777 | |
778 | # default gw |
779 | local GATEWAY |
780 | local GATEWAY_IF |
781 | |
782 | # wireless extensions |
783 | local WIRELESS_AP |
784 | local WIRELESS_AUTH_MODE |
785 | local WIRELESS_BITRATE |
786 | local WIRELESS_CHANNEL |
787 | local WIRELESS_DEFAULT_KEY |
788 | local WIRELESS_ESSID |
789 | local WIRELESS_FREQUENCY |
790 | local WIRELESS_KEY |
791 | local WIRELESS_KEY_ASCII |
792 | local WIRELESS_KEY_0 |
793 | local WIRELESS_KEY_1 |
794 | local WIRELESS_KEY_2 |
795 | local WIRELESS_KEY_3 |
796 | local WIRELESS_KEY_LENGTH |
797 | local WIRELESS_MODE |
798 | local WIRELESS_NICK |
799 | local WIRELESS_NWID |
800 | local WIRELESS_POWER |
801 | |
802 | source ${file} |
803 | eval value=\$$(echo ${var}) |
804 | echo "${value}" |
805 | } |
806 | |
807 | case $1 in |
808 | start) |
809 | # check for global overrides |
810 | [ -f ${SETTINGSPATH}/confd-networking ] && ALX_CONFD_NETWORKING=true |
811 | [ -f /hardware-auto-detection ] && ALX_FORCED_RECHECK=true |
812 | read_cmdline hardware-auto-detection && ALX_FORCED_RECHECK=true |
813 | read_cmdline alx-reset-settings && ALX_RESET_SETTINGS=true |
814 | |
815 | # kill all settings if requested |
816 | if [[ ${ALX_RESET_SETTINGS} = true ]] |
817 | then |
818 | reset_system_settings |
819 | fi |
820 | |
821 | # retrieve or validate current serial |
822 | get_system_serial |
823 | if [[ ${ALX_HW_DETECT} = true ]] |
824 | then |
825 | if [[ ${ALX_FORCED_RECHECK} = true ]] |
826 | then |
827 | update_settings_in_db |
828 | else |
829 | import_settings_to_db |
830 | fi |
831 | import_settings_local |
832 | |
833 | # here we should also exchange the ssh keys |
834 | # or the system cannot be rebooted after |
835 | # the first start via the alx-webadmin |
836 | config_ssh_auth |
837 | fi |
838 | |
839 | # now setup system configuration |
840 | # alx_setup_or_whatever_it_will_be_called() |
841 | [[ ${ALX_HW_DETECT} = false ]] && update_system_settings |
842 | |
843 | # stop at last the preliminary networking (dhcp) |
844 | preliminary_network stop |
845 | ;; |
846 | |
847 | stop) |
848 | # unset_alx_connected #--> now in alxsetstate-rc6 |
849 | # ! important !: del systemstate |
850 | [ -f /etc/alxconfig-ng/state/state ] && rm /etc/alxconfig-ng/state/state |
851 | sleep 0.1 |
852 | ;; |
853 | *) |
854 | echo "Usage: $0 {start|stop} ..." |
855 | ;; |
856 | esac |
857 |
Properties
Name | Value |
---|---|
svn:executable | * |