tinyalxconfig-ng/init.d/alxsettings

#!/bin/bash

# <niro@magellan-linux.de>

#%rlevels: 7:s 0:k
#%start: 41
#%stop: 01

#deps
#%needs:
#%before:
#%after:

# $Id$

# checks first if the client was already configured and if it has an valid serial
# if not it runs the autoconfiguration script
# these settings will be used for client setup
#
# if client was valid it first will check if his settings against the server
# if no changes are at server side they will be kept, if yes the get updated. 
# the server settings has higher priority.

source /etc/conf.d/rc
source ${rc_functions}

# mysql settings
source /etc/alxconfig-ng/config.rc

# helper functions
source /usr/lib/alxconfig-ng/functions/mysqlfunctions
source /usr/lib/alxconfig-ng/functions/serial_functions
source /usr/lib/alxconfig-ng/functions/config_driverkits
source /usr/lib/alxconfig-ng/functions/config_modules
source /usr/lib/alxconfig-ng/functions/config_network
source /usr/lib/alxconfig-ng/functions/config_printers
source /usr/lib/alxconfig-ng/functions/config_sessions
source /usr/lib/alxconfig-ng/functions/config_x11
source /usr/lib/alxconfig-ng/functions/config_auth
source /usr/lib/alxconfig-ng/functions/config_ssh_auth

# other needed vars
ALX_HW_DETECT=false
ALX_FORCED_RECHECK=false
ALX_RESET_SETTINGS=false

# unset vars which may kill us
unset ALX_SERIAL ALX_STATE


# setup needed directories
[ ! -d /etc/alxconfig-ng/state ] && install -d /etc/alxconfig-ng/state


# read_cmdline ${item}
read_cmdline()
{
	local i

	for i in $(< /proc/cmdline)
	do
		[[ ${i} = $1 ]] && return 0
	done

	return 1
}

update_system_settings()
{
	echo -e ${COLMAGENTA}"Checking system setup ..."${COLDEFAULT}

	# install neccessary driverkits
	config_driverkits

	# get the modules settings
	# ! is the first thing that must be configured !
	config_modules

	# imports network settings from db
	config_networking

	# imports x11 settings from db
	config_x11

	# imports session settings from db
	config_sessions

	# imports printer settings from db
	config_printing

	# imports auth settings from db
	config_auth

	# exchange ssh rsa keys
	HOME=/root config_ssh_auth
}

get_system_serial()
{
	local CUR_IP CUR_MAC CUR_MTIME ALX_IFACE

	# check if serial file exists
	if [ -f /etc/alxconfig-ng/serial ] && [[ ${ALX_FORCED_RECHECK} = false ]]
	then
		source /etc/alxconfig-ng/serial

		# start preliminary networking (dhcp)
		preliminary_network start

		# check if mysql server is reachable
		# if not abort this script
		if ! reach_mysql_server
		then
			preliminary_network stop
			exit 1
		fi

		CUR_IP=$(/sbin/ifconfig ${ALX_IFACE} | sed -n '/addr:/s/ [^r]*..//gp')
		CUR_MAC=$(/sbin/ifconfig ${ALX_IFACE} | grep HWaddr | cut -d ' ' -f11)
		CUR_MTIME=$(date +%s)

		echo -e ${COLOREDSTAR} "Trying to validate my serial ..."

		# nice serial output
		$CURS_UP
		$SET_WCOL
		echo "[ SN: ${ALX_SERIAL} ]"

		if validate_serial "${ALX_SERIAL}" "${ALX_REG_DATE}" "${CUR_MAC}"
		then
			ALX_STATE="ok"
		else
			# abort on non valid serial
			ALX_STATE="invalid serial"
			echo "ALX_STATE=${ALX_STATE}" > /etc/alxconfig-ng/state/state
			show_invalid_serial_msg
			exit 1
		fi

	else
		# run hardware detection
		echo
		if [[ ${ALX_FORCED_RECHECK} = true ]]
		then
			echo -e ${COLMAGENTA}"Hardware autodetection forced by system-administrator"${COLDEFAULT}
		else
			echo -e ${COLMAGENTA}"Preparing system for first boot"${COLDEFAULT}
		fi
		# cleaning up old data-crap
		if [ -d /etc/sysconfig/hwsetup ]
		then
			echo -e ${COLOREDSTAR}"Cleaning up old data ..."
			rm -f /etc/sysconfig/hwsetup/*
		fi
		ALX_HW_DETECT=true
		echo -en "${COLOREDSTAR}";hwsetup -p > /dev/null

		# set hostname to alx_default_hostname
		# use old hostname if this is a forced re-check
		[[ ${ALX_FORCED_RECHECK} = true ]] && ALX_DEFAULT_HOSTNAME="$(< /etc/hostname)"
		[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx
		HOSTNAME="${ALX_DEFAULT_HOSTNAME}"

		# update the hostname on the system for sure
		echo "${HOSTNAME}" > /etc/hostname

		# start preliminary networking (dhcp)
		preliminary_network start

		# check if mysql server is reachable
		# if not abort this script
		if ! reach_mysql_server
		then
			preliminary_network stop
			exit 1
		fi

		CUR_IP=$(/sbin/ifconfig eth0 | sed -n '/addr:/s/ [^r]*..//gp')
		CUR_MAC=$(/sbin/ifconfig eth0 | grep HWaddr | cut -d ' ' -f11)
		CUR_MTIME=$(date +%s)

		# abort now if this is a forced re-check
		if [[ ${ALX_FORCED_RECHECK} = true ]]
		then
			# but first check the serial
			source /etc/alxconfig-ng/serial

			echo -e ${COLOREDSTAR} "Trying to validate my serial ..."

			# nice serial output
			$CURS_UP
			$SET_WCOL
			echo "[ SN: ${ALX_SERIAL} ]"

			if validate_serial "${ALX_SERIAL}" "${ALX_REG_DATE}" "${CUR_MAC}"
			then
				ALX_STATE="ok"
			else
				# abort on non valid serial
				ALX_STATE="invalid serial"
				echo "ALX_STATE=${ALX_STATE}" > /etc/alxconfig-ng/state/state
				show_invalid_serial_msg
				exit 1
			fi

			# write current state to temp file
			echo "ALX_STATE=${ALX_STATE}" > /etc/alxconfig-ng/state/state
			[ -f /hardware-auto-detection ] && rm /hardware-auto-detection

			# now export ALX_FORCED_RECHECK=true
			# that the setting will be updated not inserted !
			export ALX_FORCED_RECHECK=true
			return 0
		fi

		echo -e ${COLOREDSTAR} "Trying to get new serial ..."

		# request a new serial; one command now (cause must be done in the same session)
		ALX_SERIAL=$(mysqldo "insert into client_serials (mtime, mac) values('${CUR_MTIME}','${CUR_MAC}');
			select last_insert_id();")

		if [[ ${ALX_SERIAL} != NULL ]]
		then
			# nice serial output
			$CURS_UP
			$SET_WCOL
			echo "[ SN: ${ALX_SERIAL} ]"

			# set ALX_STATE to ok so everybody knows that everything was ok
			ALX_STATE=ok

			echo "ALX_SERIAL=${ALX_SERIAL}" > /etc/alxconfig-ng/serial
			echo "ALX_REG_DATE=${CUR_MTIME}" >> /etc/alxconfig-ng/serial

			evaluate_retval
		else
			# print false (works only if this is the first statement here)
			evaluate_retval

			# set ALX_STATE to error so everybody sees there was an error
			ALX_STATE=error

			# show an error that no new serial was found
			# nice serial output
			$CURS_UP
			$SET_WCOL
			echo -e "[ SN: ${COLRED}None, 0${COLDEFAULT} ]"
		fi
	fi

	# write current state to temp file
	echo "ALX_STATE=${ALX_STATE}" > /etc/alxconfig-ng/state/state
	echo "ALX_IFACE=${ALX_IFACE}" >> /etc/alxconfig-ng/state/state
}

# imports current settings to the database resolved by the hardware detection
import_settings_to_db()
{
	# note: networking is always 'dhcp' if hw was autodetected
	# note: default_domain/hostname is set in config.rc

	# to be safe, we do some sanity checks
	[[ -z ${ALX_DEFAULT_DOMAIN} ]] && ALX_DEFAULT_DOMAIN=localdomain
	[[ -z ${ALX_DEFAULT_HOSTNAME} ]] && ALX_DEFAULT_HOSTNAME=magellan-alx

	# vars used by hwdetect
	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
	local MOUSETYPE XMOUSETYPE FULLNAME DEVICE

	# get setting from hwdetect
	source /etc/sysconfig/hwsetup/knoppix
	source /etc/sysconfig/hwsetup/mouse

	echo
	echo -e ${COLMAGENTA}"Importing detected settings to database"${COLDEFAULT}

	# network
	echo "      Network settings ..."
	# global settings
	mysqldo "insert into cfg_network(serial, hostname, domain )
			values('${ALX_SERIAL}', '${ALX_DEFAULT_HOSTNAME}','${ALX_DEFAULT_DOMAIN}');"

	# let udev decide which module should be loaded
	# get all devices from sysfs
	local i
	local iface
	for i in /sys/class/net/eth?
	do
		iface=$(basename ${i})
		NETCARD_DRIVER=$(source /sys/class/net/${iface}/uevent; echo ${PHYSDEVDRIVER})
		mysqldo "insert into cfg_interfaces(
			serial,
			iface,
			module,
			networking
			)
			values(
				'${ALX_SERIAL}',
				'${iface}',
				'${NETCARD_DRIVER}',
				'dhcp'
			);"
	done
	evaluate_retval

	# xserver
	echo "      Graphic settings ..."
	# xserver general
	( mysqldo "insert into cfg_graphic(
			serial,
			module,
			resolution,
			depth,
			monitorid
		)
		values(
			'${ALX_SERIAL}',
			'${XMODULE}',
			'1024x768',
			'16',
			'0'
		);"; )
	evaluate_retval

	# input
	echo "      Input settings ..."
	mysqldo "insert into cfg_input(serial,mouse,keyboard) values('${ALX_SERIAL}','${XMOUSETYPE}','kbd');"
	evaluate_retval

	# auth
	echo "      Authentification settings ..."
	mysqldo "insert into client_auth(
			serial,
			username,
			shell,
			vnc,
			samba,
			station
		)
		values(
			'${ALX_SERIAL}',
			'${ALX_UNPRIV_USER}',
			'',
			'',
			'',
			''
		);"
	evaluate_retval

	# exchange ssh rsa keys - the first boot needs this !
	# or no reboot will work via the webadmin
	echo "      SSH authentification settings ..."
	HOME=/root config_ssh_auth
	evaluate_retval

	# autostart
	echo "      Autostart settings ..."
	mysqldo "insert into cfg_autostart(serial,session) values('${ALX_SERIAL}','');"

	# screensaver
	echo "      Screensaver settings ..."
	mysqldo "insert into cfg_screensaver(serial,screensaver) values('${ALX_SERIAL}','')"

	# theme
	echo "      Theme settings ..."
	mysqldo "insert into cfg_theme(serial,theme) values('${ALX_SERIAL}','${ALX_DEFAULT_THEME}')"

	evaluate_retval
}

# imports current settings to the database resolved by the hardware detection
update_settings_in_db()
{
	# note: networking is always 'dhcp' if hw was autodetected
	# note: default_domain/hostname is set in config.rc or exported
	# note: we updating only hardware settings here !

	# to be safe, we do some sanity checks
	[[ -z ${ALX_DEFAULT_DOMAIN} ]] && ALX_DEFAULT_DOMAIN=localdomain
	[[ -z ${ALX_DEFAULT_HOSTNAME} ]] && ALX_DEFAULT_HOSTNAME=magellan-alx

	# vars used by hwdetect
	local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
	local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
	local MOUSETYPE XMOUSETYPE FULLNAME DEVICE

	# get setting from hwdetect
	source /etc/sysconfig/hwsetup/knoppix
	source /etc/sysconfig/hwsetup/mouse

	echo
	echo -e ${COLMAGENTA}"Updating detected settings in database"${COLDEFAULT}

	# network
	echo "      Network settings ..."
	mysqldo "update cfg_network set
			hostname='${ALX_DEFAULT_HOSTNAME}',
			domain='${ALX_DEFAULT_DOMAIN}';
		where serial=${ALX_SERIAL};"

	# let udev decide which module should be loaded
	# get all devices from sysfs
	local i
	local iface
	for i in /sys/class/net/eth?
	do
		iface=$(basename ${i})
		NETCARD_DRIVER=$(source /sys/class/net/${iface}/uevent; echo ${PHYSDEVDRIVER})
		mysqldo "update cfg_interfaces set
				iface='${iface}',
				module='${NETCARD_DRIVER}',
				networking='${NETWORKING}',
			where serial=${ALX_SERIAL};"

			# only insert the *FIRST* iface
			break
		done
	evaluate_retval

	# xserver
	echo "      Graphic settings ..."
	# xserver general
	mysqldo "update cfg_graphic set
			module='${XMODULE}',
			resolution='1024x768',
			depth='16',
			monitorid='0'
		where serial=${ALX_SERIAL};"
	evaluate_retval

	# input
	echo "      Input settings ..."
	mysqldo "update cfg_input set mouse='${XMOUSETYPE}', keyboard='kbd' where serial=${ALX_SERIAL};"
	evaluate_retval
}

# start|stop
preliminary_network()
{
	case $1 in
		start)
			# keeping like always safe:
			# no network should be started here
			${rc_base}/init.d/network stop

			echo -e ${COLMAGENTA}"Starting preliminary networking ... "${COLDEFAULT}
			# start network configured from /etc/conf.d
			${rc_base}/init.d/network start
			;;

		stop)
			echo -e ${COLMAGENTA}"Stopping preliminary networking ... "${COLDEFAULT}
			${rc_base}/init.d/network stop
			;;

		*)
			echo "Usage: preliminary_network {start|stop}"
			;;
	esac
}

reset_system_settings()
{
	# force load of de kbdkeys
	loadkeys -q de
	echo
	echo -en ${COLRED}
	echo -n "*** Warning: you are about to reset *all* local settings on this system!"
	echo -e ${COLDEFAULT}
	echo "*** Do you really want to continue ?"
	echo -n "*** Enter 'yes' to continue, anything else to abort: "
	read kbinsert
	if [[ ${kbinsert} = yes ]]
	then
		echo -en ${COLRED}
		echo -n "*** OK, you really want it ... killing all settings: "
		for i in 3 2 1 now
		do
			echo -n " ${i}"
			sleep 1
		done
		echo -e ${COLDEFAULT}

		## reset all settings:
		rm -rf ${SETTINGSPATH}/*
		rm -f /etc/alxconfig-ng/serial
		rm -rf /etc/alxconfig-ng/state

		# clear all printers
		:> /etc/printcap
		find /var/spool/lpd/* -type d | xargs rm -rf &> /dev/null

		# remove all user settings
		[ -d ${ALX_UNPRIV_HOME} ] && rm -rf ${ALX_UNPRIV_HOME}

		# remove all ica-sessions
		find ${ALX_ICA_SESSIONS} -type f -name '*.ica' | xargs rm

		# remove all old nics and modules configs
		find /etc/conf.d -type f -name 'net.*' | xargs rm
		find /etc/modules.d -type f -name 'net.*' | xargs rm

		# restore default networking
		cat ${ALX_SKELETONS}/net/net.eth0 > /etc/conf.d/net.eth0

		echo "I am done now, press [Enter] to reboot system ..."
	else
		echo "Aborted, press [Enter] to reboot system ..."
	fi
	read
	reboot
}

case $1 in
	start)
		# check for global overrides
		[ -f /hardware-auto-detection ] && ALX_FORCED_RECHECK=true
		read_cmdline hardware-auto-detection && ALX_FORCED_RECHECK=true
		read_cmdline alx-reset-settings && ALX_RESET_SETTINGS=true

		# kill all settings if requested
		if [[ ${ALX_RESET_SETTINGS} = true ]]
		then
			reset_system_settings
		fi

		# retrieve or validate current serial
		get_system_serial
		if [[ ${ALX_HW_DETECT} = true ]]
		then
			if [[ ${ALX_FORCED_RECHECK} = true ]]
			then
				update_settings_in_db
			else
				import_settings_to_db
			fi

			# here we should also exchange the ssh keys
			# or the system cannot be rebooted after
			# the first start via the alx-webadmin
			config_ssh_auth
		fi

		# now setup system configuration
		# alx_setup_or_whatever_it_will_be_called()
		update_system_settings

		# stop at last the preliminary networking (dhcp)
		preliminary_network stop
		;;

	stop)
		# unset_alx_connected #--> now in alxsetstate-rc6
		# ! important !: del systemstate
		[ -f /etc/alxconfig-ng/state/state ] && rm /etc/alxconfig-ng/state/state
		;;
	*)
		echo "Usage: $0 {start|stop} ..."
		;;
esac
1	niro	386	#!/bin/bash
2
3			# <niro@magellan-linux.de>
4
5	niro	396	#%rlevels: 7:s 0:k
6	niro	386	#%start: 41
7			#%stop: 01
8
9			#deps
10			#%needs:
11			#%before:
12			#%after:
13
14	niro	537	# $Id$
15	niro	386
16			# checks first if the client was already configured and if it has an valid serial
17			# if not it runs the autoconfiguration script
18			# these settings will be used for client setup
19			#
20			# if client was valid it first will check if his settings against the server
21			# if no changes are at server side they will be kept, if yes the get updated.
22			# the server settings has higher priority.
23
24	niro	502	source /etc/conf.d/rc
25			source ${rc_functions}
26	niro	386
27			# mysql settings
28			source /etc/alxconfig-ng/config.rc
29
30			# helper functions
31			source /usr/lib/alxconfig-ng/functions/mysqlfunctions
32			source /usr/lib/alxconfig-ng/functions/serial_functions
33	niro	489	source /usr/lib/alxconfig-ng/functions/config_driverkits
34	niro	386	source /usr/lib/alxconfig-ng/functions/config_modules
35			source /usr/lib/alxconfig-ng/functions/config_network
36			source /usr/lib/alxconfig-ng/functions/config_printers
37			source /usr/lib/alxconfig-ng/functions/config_sessions
38			source /usr/lib/alxconfig-ng/functions/config_x11
39			source /usr/lib/alxconfig-ng/functions/config_auth
40			source /usr/lib/alxconfig-ng/functions/config_ssh_auth
41
42			# other needed vars
43			ALX_HW_DETECT=false
44			ALX_FORCED_RECHECK=false
45			ALX_RESET_SETTINGS=false
46
47			# unset vars which may kill us
48			unset ALX_SERIAL ALX_STATE
49
50
51			# setup needed directories
52			[ ! -d /etc/alxconfig-ng/state ] && install -d /etc/alxconfig-ng/state
53
54
55			# read_cmdline ${item}
56			read_cmdline()
57			{
58			local i
59
60			for i in $(< /proc/cmdline)
61			do
62			[[ ${i} = $1 ]] && return 0
63			done
64
65			return 1
66			}
67
68			update_system_settings()
69			{
70			echo -e ${COLMAGENTA}"Checking system setup ..."${COLDEFAULT}
71
72	niro	489	# install neccessary driverkits
73			config_driverkits
74
75	niro	386	# get the modules settings
76			# ! is the first thing that must be configured !
77			config_modules
78
79			# imports network settings from db
80			config_networking
81
82			# imports x11 settings from db
83			config_x11
84
85			# imports session settings from db
86			config_sessions
87
88			# imports printer settings from db
89			config_printing
90
91			# imports auth settings from db
92			config_auth
93
94			# exchange ssh rsa keys
95			HOME=/root config_ssh_auth
96			}
97
98			get_system_serial()
99			{
100			local CUR_IP CUR_MAC CUR_MTIME ALX_IFACE
101
102			# check if serial file exists
103			if [ -f /etc/alxconfig-ng/serial ] && [[ ${ALX_FORCED_RECHECK} = false ]]
104			then
105			source /etc/alxconfig-ng/serial
106
107			# start preliminary networking (dhcp)
108			preliminary_network start
109
110			# check if mysql server is reachable
111			# if not abort this script
112			if ! reach_mysql_server
113			then
114			preliminary_network stop
115			exit 1
116			fi
117
118			CUR_IP=$(/sbin/ifconfig ${ALX_IFACE} \| sed -n '/addr:/s/ [^r]*..//gp')
119			CUR_MAC=$(/sbin/ifconfig ${ALX_IFACE} \| grep HWaddr \| cut -d ' ' -f11)
120			CUR_MTIME=$(date +%s)
121
122			echo -e ${COLOREDSTAR} "Trying to validate my serial ..."
123
124			# nice serial output
125			$CURS_UP
126			$SET_WCOL
127			echo "[ SN: ${ALX_SERIAL} ]"
128
129			if validate_serial "${ALX_SERIAL}" "${ALX_REG_DATE}" "${CUR_MAC}"
130			then
131			ALX_STATE="ok"
132			else
133			# abort on non valid serial
134			ALX_STATE="invalid serial"
135			echo "ALX_STATE=${ALX_STATE}" > /etc/alxconfig-ng/state/state
136			show_invalid_serial_msg
137			exit 1
138			fi
139
140			else
141			# run hardware detection
142			echo
143			if [[ ${ALX_FORCED_RECHECK} = true ]]
144			then
145			echo -e ${COLMAGENTA}"Hardware autodetection forced by system-administrator"${COLDEFAULT}
146			else
147			echo -e ${COLMAGENTA}"Preparing system for first boot"${COLDEFAULT}
148			fi
149	niro	391	# cleaning up old data-crap
150			if [ -d /etc/sysconfig/hwsetup ]
151			then
152			echo -e ${COLOREDSTAR}"Cleaning up old data ..."
153			rm -f /etc/sysconfig/hwsetup/*
154			fi
155	niro	397	ALX_HW_DETECT=true
156	niro	391	echo -en "${COLOREDSTAR}";hwsetup -p > /dev/null
157	niro	386
158			# set hostname to alx_default_hostname
159			# use old hostname if this is a forced re-check
160			[[ ${ALX_FORCED_RECHECK} = true ]] && ALX_DEFAULT_HOSTNAME="$(< /etc/hostname)"
161			[ -z "${ALX_DEFAULT_HOSTNAME}" ] && ALX_DEFAULT_HOSTNAME=magellan-alx
162			HOSTNAME="${ALX_DEFAULT_HOSTNAME}"
163
164			# update the hostname on the system for sure
165			echo "${HOSTNAME}" > /etc/hostname
166
167			# start preliminary networking (dhcp)
168			preliminary_network start
169
170			# check if mysql server is reachable
171			# if not abort this script
172			if ! reach_mysql_server
173			then
174			preliminary_network stop
175			exit 1
176			fi
177
178			CUR_IP=$(/sbin/ifconfig eth0 \| sed -n '/addr:/s/ [^r]*..//gp')
179			CUR_MAC=$(/sbin/ifconfig eth0 \| grep HWaddr \| cut -d ' ' -f11)
180			CUR_MTIME=$(date +%s)
181
182			# abort now if this is a forced re-check
183			if [[ ${ALX_FORCED_RECHECK} = true ]]
184			then
185			# but first check the serial
186			source /etc/alxconfig-ng/serial
187
188			echo -e ${COLOREDSTAR} "Trying to validate my serial ..."
189
190			# nice serial output
191			$CURS_UP
192			$SET_WCOL
193			echo "[ SN: ${ALX_SERIAL} ]"
194
195			if validate_serial "${ALX_SERIAL}" "${ALX_REG_DATE}" "${CUR_MAC}"
196			then
197			ALX_STATE="ok"
198			else
199			# abort on non valid serial
200			ALX_STATE="invalid serial"
201			echo "ALX_STATE=${ALX_STATE}" > /etc/alxconfig-ng/state/state
202			show_invalid_serial_msg
203			exit 1
204			fi
205
206			# write current state to temp file
207			echo "ALX_STATE=${ALX_STATE}" > /etc/alxconfig-ng/state/state
208			[ -f /hardware-auto-detection ] && rm /hardware-auto-detection
209
210			# now export ALX_FORCED_RECHECK=true
211			# that the setting will be updated not inserted !
212			export ALX_FORCED_RECHECK=true
213			return 0
214			fi
215
216			echo -e ${COLOREDSTAR} "Trying to get new serial ..."
217
218			# request a new serial; one command now (cause must be done in the same session)
219			ALX_SERIAL=$(mysqldo "insert into client_serials (mtime, mac) values('${CUR_MTIME}','${CUR_MAC}');
220			select last_insert_id();")
221
222			if [[ ${ALX_SERIAL} != NULL ]]
223			then
224			# nice serial output
225			$CURS_UP
226			$SET_WCOL
227			echo "[ SN: ${ALX_SERIAL} ]"
228
229			# set ALX_STATE to ok so everybody knows that everything was ok
230			ALX_STATE=ok
231
232			echo "ALX_SERIAL=${ALX_SERIAL}" > /etc/alxconfig-ng/serial
233			echo "ALX_REG_DATE=${CUR_MTIME}" >> /etc/alxconfig-ng/serial
234
235			evaluate_retval
236			else
237			# print false (works only if this is the first statement here)
238			evaluate_retval
239
240			# set ALX_STATE to error so everybody sees there was an error
241			ALX_STATE=error
242
243			# show an error that no new serial was found
244			# nice serial output
245			$CURS_UP
246			$SET_WCOL
247			echo -e "[ SN: ${COLRED}None, 0${COLDEFAULT} ]"
248			fi
249			fi
250
251			# write current state to temp file
252			echo "ALX_STATE=${ALX_STATE}" > /etc/alxconfig-ng/state/state
253			echo "ALX_IFACE=${ALX_IFACE}" >> /etc/alxconfig-ng/state/state
254			}
255
256			# imports current settings to the database resolved by the hardware detection
257			import_settings_to_db()
258			{
259			# note: networking is always 'dhcp' if hw was autodetected
260			# note: default_domain/hostname is set in config.rc
261
262			# to be safe, we do some sanity checks
263	niro	490	[[ -z ${ALX_DEFAULT_DOMAIN} ]] && ALX_DEFAULT_DOMAIN=localdomain
264			[[ -z ${ALX_DEFAULT_HOSTNAME} ]] && ALX_DEFAULT_HOSTNAME=magellan-alx
265	niro	386
266			# vars used by hwdetect
267			local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
268			local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
269			local MOUSETYPE XMOUSETYPE FULLNAME DEVICE
270
271			# get setting from hwdetect
272			source /etc/sysconfig/hwsetup/knoppix
273			source /etc/sysconfig/hwsetup/mouse
274
275			echo
276			echo -e ${COLMAGENTA}"Importing detected settings to database"${COLDEFAULT}
277
278			# network
279	niro	490	echo " Network settings ..."
280	niro	444	# global settings
281			mysqldo "insert into cfg_network(serial, hostname, domain )
282			values('${ALX_SERIAL}', '${ALX_DEFAULT_HOSTNAME}','${ALX_DEFAULT_DOMAIN}');"
283	niro	386
284	niro	444	# let udev decide which module should be loaded
285			# get all devices from sysfs
286			local i
287			local iface
288			for i in /sys/class/net/eth?
289			do
290			iface=$(basename ${i})
291			NETCARD_DRIVER=$(source /sys/class/net/${iface}/uevent; echo ${PHYSDEVDRIVER})
292			mysqldo "insert into cfg_interfaces(
293			serial,
294			iface,
295			module,
296			networking
297	niro	386	)
298			values(
299			'${ALX_SERIAL}',
300	niro	444	'${iface}',
301	niro	386	'${NETCARD_DRIVER}',
302			'dhcp'
303			);"
304	niro	444	done
305	niro	386	evaluate_retval
306
307			# xserver
308	niro	490	echo " Graphic settings ..."
309	niro	386	# xserver general
310			( mysqldo "insert into cfg_graphic(
311			serial,
312			module,
313			resolution,
314			depth,
315			monitorid
316			)
317			values(
318			'${ALX_SERIAL}',
319			'${XMODULE}',
320			'1024x768',
321			'16',
322			'0'
323			);"; )
324			evaluate_retval
325
326			# input
327	niro	490	echo " Input settings ..."
328	niro	444	mysqldo "insert into cfg_input(serial,mouse,keyboard) values('${ALX_SERIAL}','${XMOUSETYPE}','kbd');"
329	niro	386	evaluate_retval
330
331			# auth
332	niro	490	echo " Authentification settings ..."
333	niro	386	mysqldo "insert into client_auth(
334			serial,
335			username,
336			shell,
337			vnc,
338			samba,
339			station
340			)
341			values(
342			'${ALX_SERIAL}',
343			'${ALX_UNPRIV_USER}',
344			'',
345			'',
346			'',
347			''
348			);"
349			evaluate_retval
350
351			# exchange ssh rsa keys - the first boot needs this !
352			# or no reboot will work via the webadmin
353	niro	490	echo " SSH authentification settings ..."
354	niro	386	HOME=/root config_ssh_auth
355			evaluate_retval
356
357			# autostart
358	niro	490	echo " Autostart settings ..."
359	niro	386	mysqldo "insert into cfg_autostart(serial,session) values('${ALX_SERIAL}','');"
360
361			# screensaver
362	niro	490	echo " Screensaver settings ..."
363	niro	386	mysqldo "insert into cfg_screensaver(serial,screensaver) values('${ALX_SERIAL}','')"
364
365	niro	498	# theme
366			echo " Theme settings ..."
367			mysqldo "insert into cfg_theme(serial,theme) values('${ALX_SERIAL}','${ALX_DEFAULT_THEME}')"
368
369	niro	386	evaluate_retval
370			}
371
372			# imports current settings to the database resolved by the hardware detection
373			update_settings_in_db()
374			{
375			# note: networking is always 'dhcp' if hw was autodetected
376			# note: default_domain/hostname is set in config.rc or exported
377			# note: we updating only hardware settings here !
378
379			# to be safe, we do some sanity checks
380	niro	490	[[ -z ${ALX_DEFAULT_DOMAIN} ]] && ALX_DEFAULT_DOMAIN=localdomain
381			[[ -z ${ALX_DEFAULT_HOSTNAME} ]] && ALX_DEFAULT_HOSTNAME=magellan-alx
382	niro	386
383			# vars used by hwdetect
384			local NETCARD_FULLNAME NETCARD_DRIVER MOUSE_FULLNAME MOUSE_DEVICE SOUND_FULLNAME
385			local SOUND_DRIVER XSERVER XMODULE XDESC FLOPPY_FULLNAME FLOPPY_DEVICE FLOPPY_DRIVER
386			local MOUSETYPE XMOUSETYPE FULLNAME DEVICE
387
388			# get setting from hwdetect
389			source /etc/sysconfig/hwsetup/knoppix
390			source /etc/sysconfig/hwsetup/mouse
391
392			echo
393			echo -e ${COLMAGENTA}"Updating detected settings in database"${COLDEFAULT}
394
395			# network
396	niro	490	echo " Network settings ..."
397	niro	444	mysqldo "update cfg_network set
398			hostname='${ALX_DEFAULT_HOSTNAME}',
399			domain='${ALX_DEFAULT_DOMAIN}';
400			where serial=${ALX_SERIAL};"
401	niro	386
402	niro	444	# let udev decide which module should be loaded
403			# get all devices from sysfs
404			local i
405			local iface
406			for i in /sys/class/net/eth?
407			do
408			iface=$(basename ${i})
409			NETCARD_DRIVER=$(source /sys/class/net/${iface}/uevent; echo ${PHYSDEVDRIVER})
410			mysqldo "update cfg_interfaces set
411			iface='${iface}',
412			module='${NETCARD_DRIVER}',
413			networking='${NETWORKING}',
414			where serial=${ALX_SERIAL};"
415	niro	386
416			# only insert the FIRST iface
417			break
418			done
419			evaluate_retval
420
421			# xserver
422	niro	490	echo " Graphic settings ..."
423	niro	386	# xserver general
424			mysqldo "update cfg_graphic set
425			module='${XMODULE}',
426			resolution='1024x768',
427			depth='16',
428			monitorid='0'
429			where serial=${ALX_SERIAL};"
430			evaluate_retval
431
432			# input
433	niro	490	echo " Input settings ..."
434	niro	444	mysqldo "update cfg_input set mouse='${XMOUSETYPE}', keyboard='kbd' where serial=${ALX_SERIAL};"
435	niro	386	evaluate_retval
436			}
437
438			# start\|stop
439			preliminary_network()
440			{
441			case $1 in
442			start)
443			# keeping like always safe:
444	niro	388	# no network should be started here
445			${rc_base}/init.d/network stop
446	niro	386
447			echo -e ${COLMAGENTA}"Starting preliminary networking ... "${COLDEFAULT}
448			# start network configured from /etc/conf.d
449	niro	388	${rc_base}/init.d/network start
450	niro	386	;;
451
452			stop)
453			echo -e ${COLMAGENTA}"Stopping preliminary networking ... "${COLDEFAULT}
454	niro	388	${rc_base}/init.d/network stop
455	niro	386	;;
456
457			*)
458			echo "Usage: preliminary_network {start\|stop}"
459			;;
460			esac
461			}
462
463			reset_system_settings()
464			{
465			# force load of de kbdkeys
466			loadkeys -q de
467			echo
468			echo -en ${COLRED}
469			echo -n "*** Warning: you are about to reset all local settings on this system!"
470			echo -e ${COLDEFAULT}
471			echo "*** Do you really want to continue ?"
472			echo -n "*** Enter 'yes' to continue, anything else to abort: "
473			read kbinsert
474			if [[ ${kbinsert} = yes ]]
475			then
476			echo -en ${COLRED}
477			echo -n "*** OK, you really want it ... killing all settings: "
478			for i in 3 2 1 now
479			do
480			echo -n " ${i}"
481			sleep 1
482			done
483			echo -e ${COLDEFAULT}
484
485			## reset all settings:
486			rm -rf ${SETTINGSPATH}/*
487			rm -f /etc/alxconfig-ng/serial
488			rm -rf /etc/alxconfig-ng/state
489
490	niro	491	# clear all printers
491			:> /etc/printcap
492	niro	499	find /var/spool/lpd/* -type d \| xargs rm -rf &> /dev/null
493	niro	386
494			# remove all user settings
495			[ -d ${ALX_UNPRIV_HOME} ] && rm -rf ${ALX_UNPRIV_HOME}
496
497			# remove all ica-sessions
498			find ${ALX_ICA_SESSIONS} -type f -name '*.ica' \| xargs rm
499
500			# remove all old nics and modules configs
501			find /etc/conf.d -type f -name 'net.*' \| xargs rm
502			find /etc/modules.d -type f -name 'net.*' \| xargs rm
503
504			# restore default networking
505			cat ${ALX_SKELETONS}/net/net.eth0 > /etc/conf.d/net.eth0
506
507			echo "I am done now, press [Enter] to reboot system ..."
508			else
509			echo "Aborted, press [Enter] to reboot system ..."
510			fi
511			read
512			reboot
513			}
514
515			case $1 in
516			start)
517			# check for global overrides
518			[ -f /hardware-auto-detection ] && ALX_FORCED_RECHECK=true
519			read_cmdline hardware-auto-detection && ALX_FORCED_RECHECK=true
520			read_cmdline alx-reset-settings && ALX_RESET_SETTINGS=true
521
522			# kill all settings if requested
523			if [[ ${ALX_RESET_SETTINGS} = true ]]
524			then
525			reset_system_settings
526			fi
527
528			# retrieve or validate current serial
529			get_system_serial
530			if [[ ${ALX_HW_DETECT} = true ]]
531			then
532			if [[ ${ALX_FORCED_RECHECK} = true ]]
533			then
534			update_settings_in_db
535			else
536			import_settings_to_db
537			fi
538
539			# here we should also exchange the ssh keys
540			# or the system cannot be rebooted after
541			# the first start via the alx-webadmin
542			config_ssh_auth
543			fi
544
545			# now setup system configuration
546			# alx_setup_or_whatever_it_will_be_called()
547	niro	533	update_system_settings
548	niro	386
549			# stop at last the preliminary networking (dhcp)
550			preliminary_network stop
551			;;
552
553			stop)
554			# unset_alx_connected #--> now in alxsetstate-rc6
555			# ! important !: del systemstate
556			[ -f /etc/alxconfig-ng/state/state ] && rm /etc/alxconfig-ng/state/state
557			;;
558			*)
559			echo "Usage: $0 {start\|stop} ..."
560			;;
561			esac