mage-next/src/etc-update.in

#!/bin/bash
# $Id$
#
# Copyright 1999-2004 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: /home/cvsd/magellan-cvs/magellan-src/mage/usr/lib/mage/etc-update,v 1.7 2005-10-26 08:11:30 niro Exp $

# Author Brandon Low <lostlogic@gentoo.org>
#
# Previous version (from which I've borrowed a few bits) by:
# Jochem Kossen <j.kossen@home.nl>
# Leo Lipelis <aeoo@gentoo.org>
# Karl Trygve Kalleberg <karltk@gentoo.org>
#

# Modified by Niels Rogalla <niro@magellan-linux.de> to use this with Magellan-Linux
# version: 0.4.0-r8

function get_config() {
	item=$1

	# First strip off comment lines, then grab the configuration
	# item. If there's more than one of the same configuration item,
	# then allow the last setting to take precedence.
	cut -d'#' -f1-1 /etc/etc-update.conf | \
		sed -ne "s/^ *$item *= *\([\"']\{0,1\}\)\(.*\)\1/\2/p" |sed -e '$p;d'
}

function scan() {

	echo "Scanning Configuration files..."
	rm -rf ${TMP}/files > /dev/null 2>&1
	mkdir ${TMP}/files || die "Failed mkdir command!" 1
	count=0
	input=0
	
	for path in ${CONFIG_PROTECT}; do if [ -d ${path} ]; then
		ofile=""
		for file in `find ${path}/ -iname "._cfg????_*" |
			   sed -e "s:\(^.*/\)\(\._cfg[0-9]*_\)\(.*$\):\1\2\3\%\2\%\3:" |
			   sort -t'%' -k3 -k2 | LANG=POSIX LC_ALL=POSIX cut -f1 -d'%'`; do
			rpath=`echo "${file/\/\///}" | sed -e "s:/[^/]*$::"`
			rfile=`echo "${file/\/\///}" | sed -e "s:^.*/::"`
			for mpath in ${CONFIG_PROTECT_MASK}; do
				if [[ "${rpath}" == "${mpath}"* ]]; then
					mv ${rpath}/${rfile} ${rpath}/${rfile:10}
					break
				fi
			done
			[ ! -f ${file} ] && continue


			if [[ "${ofile:10}" != "${rfile:10}" ]] || 
			   [[ ${opath} != ${rpath} ]]; then
				MATCHES=0
				if [[ "${EU_AUTOMERGE}" == "yes" ]]; then
					if [ ! -e "${rpath}/${rfile}" ] || [ ! -e "${rpath}/${rfile:10}" ]; then
						MATCHES=0
					else
						diff -Bbua ${rpath}/${rfile} ${rpath}/${rfile:10} | egrep '^[+-]' | egrep -v '^[+-][\t ]*#|^--- |^\+\+\+ ' | egrep -qv '^[-+][\t ]*$'
						MATCHES=$?
					fi
				elif [[ -z `diff -Nua ${rpath}/${rfile} ${rpath}/${rfile:10}|
							  grep "^[+-][^+-]"|grep -v '# .Header:.*'` ]]; then
					MATCHES=1
				fi
				if [[ "${MATCHES}" == "1" ]]; then
					echo "Automerging trivial changes in: ${rfile:10}"
					mv ${rpath}/${rfile} ${rpath}/${rfile:10}
					continue
				else
					count=${count}+1
					echo "${rpath}/${rfile:10}" > ${TMP}/files/${count}
					echo "${rpath}/${rfile}" >> ${TMP}/files/${count}
					ofile="${rfile}"
					opath="${rpath}"
					continue
				fi
			fi

			if [[ -z `diff -Nua ${rpath}/${rfile} ${rpath}/${ofile}|
					  grep "^[+-][^+-]"|grep -v '# .Header:.*'` ]]; then
				mv ${rpath}/${rfile} ${rpath}/${ofile}
				continue
			else
				echo "${rpath}/${rfile}" >> ${TMP}/files/${count}
				ofile="${rfile}"
				opath="${rpath}"
			fi
		done
	fi; done

}

function sel_file() {
	local -i isfirst=0
	until [ -f ${TMP}/files/${input} ] || [ ${input} == -1 ] || [ ${input} == -3 ]; do
		for file in `ls ${TMP}/files|sort -n`; do
			if (( ${isfirst} == 0 )); then
				isfirst=${file}
			fi
			echo -n "${file}${PAR} "
			if (( ${mode} == 0 )); then
				for word in `cat ${TMP}/files/${file}`; do
					echo ${word}
				done
			else
				head -n1 ${TMP}/files/${file}
			fi
		done > ${TMP}/menuitems

		if [ "${OVERWRITE_ALL}" == "yes" ]; then
			input=0
		else
			if (( ${mode} == 0 )); then
				echo "The following is the list of files which need updating, each 
configuration file is followed by a list of possible replacement files."
			else
				local my_title="Please select a file to update"
			fi

			if (( ${mode} == 0 )); then
				cat ${TMP}/menuitems
				echo    "Please select a file to edit by entering the corresponding number."
				echo    "              (don't use -3 or -5 if you're unsure what to do)"
				echo    "              (-1 to exit) (-3 to auto merge all remaining files)"
				echo -n "                           (-5 to auto-merge AND not use 'mv -i'): "
				read input
			else
				dialog --title "${title}" --menu "${my_title}" \
					0 0 0 `echo "-1 Exit";cat ${TMP}/menuitems` \
					2> ${TMP}/input
				input=`cat ${TMP}/input`
			fi
			if (( ${input} == -5 )); then
				input=-3
				export mv_opts=""
			fi
			if (( ${input} == -3 )); then
				input=0
				export OVERWRITE_ALL="yes"
			fi
		fi # -3 automerge
		if (( ${input} == 0 )); then
			input=${isfirst}
		fi
	done
}

function do_file() {
	echo
	local -i my_input
	local -i fcount=0
	until (( `cat ${TMP}/files/${input}|wc -l` < 2 )); do
		my_input=0
		if (( `cat ${TMP}/files/${input}|wc -l` == 2 )); then
			my_input=1
		fi
		until (( ${my_input} > 0 )) && (( ${my_input} < `cat ${TMP}/files/${input}|wc -l` )); do
			fcount=0

			if [ "${OVERWRITE_ALL}" == "yes" ]; then
				my_input=0
			else
				for line in `cat ${TMP}/files/${input}`; do
					if (( ${fcount} > 0 )); then
						echo -n "${fcount}${PAR} "
						echo "${line}"
					else
						if (( ${mode} == 0 )); then
							echo "Below are the new config files for ${line}:"
						else
							local my_title="Please select a file to process for ${line}"
						fi
					fi
					fcount=${fcount}+1
				done > ${TMP}/menuitems

				if (( ${mode} == 0 )); then
					cat ${TMP}/menuitems
					echo -n "Please select a file to process (-1 to exit this file): "
					read my_input
				else
					dialog --title "${title}" --menu "${my_title}" \
						0 0 0 `cat ${TMP}/menuitems;echo "${fcount} Exit"` \
						2> ${TMP}/input
					my_input=`cat ${TMP}/input`
				fi
			fi # OVERWRITE_ALL

			if (( ${my_input} == 0 )); then
				my_input=1
			elif (( ${my_input} == -1 )); then
				input=0 
				return
			elif (( ${my_input} == ${fcount} )); then
				break
			fi
		done
		if (( ${my_input} == ${fcount} )); then
			break
		fi

		fcount=${my_input}+1

		file=`cat ${TMP}/files/${input} | sed -e "${fcount}p;d"`
		ofile=`head -n1 ${TMP}/files/${input}`

		do_cfg "${file}" "${ofile}"

		cat ${TMP}/files/${input}|sed -e "${fcount}!p;d" > ${TMP}/files/sed
		mv ${TMP}/files/sed ${TMP}/files/${input}

		if (( ${my_input} == -1 )); then
			break
		fi
	done
	echo
	rm ${TMP}/files/${input}
	count=${count}-1
}

function do_cfg() {
	
	local file="${1}"
	local ofile="${2}"
	local -i my_input=0
	
	until (( ${my_input} == -1 )) || [ ! -f ${file} ]; do
		if [ "${OVERWRITE_ALL}" == "yes" ]; then
			my_input=1
		else
		  showdiffcmd=$(echo "${diff_command}" |
				sed -e "s:%file1:${ofile}:" -e "s:%file2:${file}:")
				
			if [ "${using_editor}" == 0 ]; then
				(
					echo "Showing differences between ${ofile} and ${file}"
					${showdiffcmd}
				) | ${pager}
			else
				echo "Beginning of differences between ${ofile} and ${file}"
				${showdiffcmd}
				echo "End of differences between ${ofile} and ${file}"
			fi
			if [ -L "${file}" ]; then
				echo
				echo "-------------------------------------------------------------"
				echo "NOTE: File is a symlink to another file. REPLACE recommended."
				echo "      The original file may simply have moved. Please review."
				echo "-------------------------------------------------------------"
				echo
			fi
			echo -n "1) Replace original with update
2) Delete update, keeping original as is
3) Interactively merge original with update
4) Show differences again
Please select from the menu above (-1 to ignore this update): "
			read my_input
		fi
		
		case ${my_input} in
			1) echo "Replacing ${ofile} with ${file}"
			   mv ${mv_opts} ${file} ${ofile}
			   my_input=-1
			   continue
			   ;;
			2) echo "Deleting ${file}"
			   rm ${rm_opts} ${file}
			   continue
			   ;;
			3) do_merge "${file}" "${ofile}"
			   my_input=${?}
#			   [ ${my_input} == 255 ] && my_input=-1
			   continue
			   ;;
			4) continue
			   ;;
			*) continue
			   ;;
		esac
	done
}

function do_merge() {
	
	local file="${1}"
	local ofile="${2}"
	local mfile="${2}.merged"
	local -i my_input=0
	echo "${file} ${ofile} ${mfile}"

	if [ -e ${mfile} ] ; then
		echo "A previous version of the merged file exists, cleaning..."
		rm ${rm_opts} ${mfile}
	fi

	until (( ${my_input} == -1 )); do
		echo "Merging ${file} and ${ofile}"
		`echo "${merge_command}" |
		 sed -e "s:%merged:${mfile}:g" \
		 	 -e "s:%orig:${ofile}:g" \
			 -e "s:%new:${file}:g"`
		until (( ${my_input} == -1 )); do	
			echo -n "1) Replace ${ofile} with merged file
2) Show differences between merged file and original
3) Remerge original with update
4) Edit merged file
5) Return to the previous menu
Please select from the menu above (-1 to exit, losing this merge): "
			read my_input
			case ${my_input} in
				1) echo "Replacing ${ofile} with ${mfile}"
				   # busybox does not support --reference
				   if ! chmod --reference=${ofile} ${mfile} > /dev/null 2&>1
				   then
				      chmod $(stat -c %a ${ofile}) ${mfile}
				   fi
				   mv ${mv_opts} ${mfile} ${ofile}
				   rm ${rm_opts} ${file}
				   return 255
				   ;;
				2) ( echo "Showing differences between ${ofile} and ${mfile}"
					 `echo "${diff_command}" | \
					  sed -e "s:%file1:${ofile}:" \
					  	  -e "s:%file2:${mfile}:"` ) | ${pager}
				   continue
				   ;;
				3) break
				   ;;
				4) ${EDITOR:-nano -w} "${mfile}"
				   continue
					 ;;
				5) rm ${rm_opts} ${mfile}
				   return 0
				   ;;
				*) continue
				   ;;
			esac
		done
	done
	rm ${rm_opts} ${mfile}
	return 255
}

function die() {
	trap "" term
	trap "" kill
	echo "Exiting: ${1}"
	rm -rf ${TMP}
	exit ${2}
}

#
# Run the script
#
scriptname=`basename $0`

trap die term

TMP="/tmp/$$"
rm -rf ${TMP} 2> /dev/null
mkdir ${TMP} || die "failed mkdir command!" 1

# I need the CONFIG_PROTECT value
#CONFIG_PROTECT=$(/usr/lib/portage/bin/portageq config_protect)
#CONFIG_PROTECT_MASK=$(/usr/lib/portage/bin/portageq config_protect_mask)
source /etc/profile

# load etc-config's configuration
EU_AUTOMERGE=`get_config eu_automerge`
rm_opts=`get_config rm_opts`
mv_opts=`get_config mv_opts`
cp_opts=`get_config cp_opts`
pager=`get_config pager`
diff_command=`get_config diff_command`
using_editor=`get_config using_editor`
merge_command=`get_config merge_command`
declare -i mode=`get_config mode`
[ -z ${mode} ] && mode=0
[ -z "${pager}" ] && pager="cat"

#echo "rm_opts: $rm_opts, mv_opts: $mv_opts, cp_opts: $cp_opts"
#echo "pager: $pager, diff_command: $diff_command, merge_command: $merge_command" 

if (( ${mode} == 0 )); then
	PAR=")"
else
	PAR=""
fi

declare -i count=0
declare -i input=0
declare title="Gentoolkit's etc-update tool!"

scan

until (( ${input} == -1 )); do
	if (( ${count} == 0 )); then
		die "Nothing left to do; exiting. :)" 0
	fi
	sel_file
	if (( ${input} != -1 )); then
		do_file
	fi
done

die "User termination!" 0
1	niro	24	#!/bin/bash
2	niro	1544	# $Id$
3			#
4	niro	283	# Copyright 1999-2004 Gentoo Foundation
5			# Distributed under the terms of the GNU General Public License v2
6			# $Header: /home/cvsd/magellan-cvs/magellan-src/mage/usr/lib/mage/etc-update,v 1.7 2005-10-26 08:11:30 niro Exp $
7
8	niro	24	# Author Brandon Low <lostlogic@gentoo.org>
9			#
10			# Previous version (from which I've borrowed a few bits) by:
11			# Jochem Kossen <j.kossen@home.nl>
12			# Leo Lipelis <aeoo@gentoo.org>
13			# Karl Trygve Kalleberg <karltk@gentoo.org>
14			#
15
16	niro	1544	# Modified by Niels Rogalla <niro@magellan-linux.de> to use this with Magellan-Linux
17	niro	283	# version: 0.4.0-r8
18	niro	24
19			function get_config() {
20			item=$1
21
22			# First strip off comment lines, then grab the configuration
23			# item. If there's more than one of the same configuration item,
24			# then allow the last setting to take precedence.
25			cut -d'#' -f1-1 /etc/etc-update.conf \| \
26	niro	283	sed -ne "s/^ $item = \([\"']\{0,1\}\)\(.\)\1/\2/p" \|sed -e '$p;d'
27	niro	24	}
28
29			function scan() {
30
31			echo "Scanning Configuration files..."
32			rm -rf ${TMP}/files > /dev/null 2>&1
33			mkdir ${TMP}/files \|\| die "Failed mkdir command!" 1
34			count=0
35			input=0
36
37			for path in ${CONFIG_PROTECT}; do if [ -d ${path} ]; then
38			ofile=""
39	niro	283	for file in `find ${path}/ -iname "._cfg????_*" \|
40			sed -e "s:\(^./\)\(\._cfg[0-9]_\)\(.*$\):\1\2\3\%\2\%\3:" \|
41			sort -t'%' -k3 -k2 \| LANG=POSIX LC_ALL=POSIX cut -f1 -d'%'`; do
42			rpath=`echo "${file/\/\///}" \| sed -e "s:/[^/]*$::"`
43			rfile=`echo "${file/\/\///}" \| sed -e "s:^.*/::"`
44	niro	24	for mpath in ${CONFIG_PROTECT_MASK}; do
45			if [[ "${rpath}" == "${mpath}"* ]]; then
46			mv ${rpath}/${rfile} ${rpath}/${rfile:10}
47			break
48			fi
49			done
50			[ ! -f ${file} ] && continue
51
52
53			if [[ "${ofile:10}" != "${rfile:10}" ]] \|\|
54			[[ ${opath} != ${rpath} ]]; then
55			MATCHES=0
56			if [[ "${EU_AUTOMERGE}" == "yes" ]]; then
57			if [ ! -e "${rpath}/${rfile}" ] \|\| [ ! -e "${rpath}/${rfile:10}" ]; then
58			MATCHES=0
59			else
60			diff -Bbua ${rpath}/${rfile} ${rpath}/${rfile:10} \| egrep '^[+-]' \| egrep -v '^[+-][\t ]#\|^--- \|^\+\+\+ ' \| egrep -qv '^[-+][\t ]$'
61			MATCHES=$?
62			fi
63			elif [[ -z `diff -Nua ${rpath}/${rfile} ${rpath}/${rfile:10}\|
64			grep "^[+-][^+-]"\|grep -v '# .Header:.*'` ]]; then
65			MATCHES=1
66			fi
67			if [[ "${MATCHES}" == "1" ]]; then
68			echo "Automerging trivial changes in: ${rfile:10}"
69			mv ${rpath}/${rfile} ${rpath}/${rfile:10}
70			continue
71			else
72			count=${count}+1
73			echo "${rpath}/${rfile:10}" > ${TMP}/files/${count}
74			echo "${rpath}/${rfile}" >> ${TMP}/files/${count}
75			ofile="${rfile}"
76			opath="${rpath}"
77			continue
78			fi
79			fi
80
81			if [[ -z `diff -Nua ${rpath}/${rfile} ${rpath}/${ofile}\|
82			grep "^[+-][^+-]"\|grep -v '# .Header:.*'` ]]; then
83			mv ${rpath}/${rfile} ${rpath}/${ofile}
84			continue
85			else
86			echo "${rpath}/${rfile}" >> ${TMP}/files/${count}
87			ofile="${rfile}"
88			opath="${rpath}"
89			fi
90			done
91			fi; done
92
93			}
94
95			function sel_file() {
96			local -i isfirst=0
97			until [ -f ${TMP}/files/${input} ] \|\| [ ${input} == -1 ] \|\| [ ${input} == -3 ]; do
98			for file in `ls ${TMP}/files\|sort -n`; do
99			if (( ${isfirst} == 0 )); then
100			isfirst=${file}
101			fi
102			echo -n "${file}${PAR} "
103			if (( ${mode} == 0 )); then
104			for word in `cat ${TMP}/files/${file}`; do
105			echo ${word}
106			done
107			else
108			head -n1 ${TMP}/files/${file}
109			fi
110			done > ${TMP}/menuitems
111
112			if [ "${OVERWRITE_ALL}" == "yes" ]; then
113			input=0
114			else
115			if (( ${mode} == 0 )); then
116			echo "The following is the list of files which need updating, each
117			configuration file is followed by a list of possible replacement files."
118			else
119			local my_title="Please select a file to update"
120			fi
121
122			if (( ${mode} == 0 )); then
123			cat ${TMP}/menuitems
124			echo "Please select a file to edit by entering the corresponding number."
125	niro	283	echo " (don't use -3 or -5 if you're unsure what to do)"
126	niro	24	echo " (-1 to exit) (-3 to auto merge all remaining files)"
127			echo -n " (-5 to auto-merge AND not use 'mv -i'): "
128			read input
129			else
130			dialog --title "${title}" --menu "${my_title}" \
131			0 0 0 `echo "-1 Exit";cat ${TMP}/menuitems` \
132			2> ${TMP}/input
133			input=`cat ${TMP}/input`
134			fi
135			if (( ${input} == -5 )); then
136			input=-3
137			export mv_opts=""
138			fi
139			if (( ${input} == -3 )); then
140			input=0
141			export OVERWRITE_ALL="yes"
142			fi
143			fi # -3 automerge
144			if (( ${input} == 0 )); then
145			input=${isfirst}
146			fi
147			done
148			}
149
150			function do_file() {
151			echo
152			local -i my_input
153			local -i fcount=0
154			until (( `cat ${TMP}/files/${input}\|wc -l` < 2 )); do
155			my_input=0
156			if (( `cat ${TMP}/files/${input}\|wc -l` == 2 )); then
157			my_input=1
158			fi
159			until (( ${my_input} > 0 )) && (( ${my_input} < `cat ${TMP}/files/${input}\|wc -l` )); do
160			fcount=0
161
162			if [ "${OVERWRITE_ALL}" == "yes" ]; then
163			my_input=0
164			else
165			for line in `cat ${TMP}/files/${input}`; do
166			if (( ${fcount} > 0 )); then
167			echo -n "${fcount}${PAR} "
168			echo "${line}"
169			else
170			if (( ${mode} == 0 )); then
171			echo "Below are the new config files for ${line}:"
172			else
173			local my_title="Please select a file to process for ${line}"
174			fi
175			fi
176			fcount=${fcount}+1
177			done > ${TMP}/menuitems
178
179			if (( ${mode} == 0 )); then
180			cat ${TMP}/menuitems
181			echo -n "Please select a file to process (-1 to exit this file): "
182			read my_input
183			else
184			dialog --title "${title}" --menu "${my_title}" \
185			0 0 0 `cat ${TMP}/menuitems;echo "${fcount} Exit"` \
186			2> ${TMP}/input
187			my_input=`cat ${TMP}/input`
188			fi
189			fi # OVERWRITE_ALL
190
191			if (( ${my_input} == 0 )); then
192			my_input=1
193			elif (( ${my_input} == -1 )); then
194	niro	283	input=0
195	niro	24	return
196			elif (( ${my_input} == ${fcount} )); then
197			break
198			fi
199			done
200			if (( ${my_input} == ${fcount} )); then
201			break
202			fi
203
204			fcount=${my_input}+1
205
206			file=`cat ${TMP}/files/${input} \| sed -e "${fcount}p;d"`
207			ofile=`head -n1 ${TMP}/files/${input}`
208
209			do_cfg "${file}" "${ofile}"
210
211			cat ${TMP}/files/${input}\|sed -e "${fcount}!p;d" > ${TMP}/files/sed
212			mv ${TMP}/files/sed ${TMP}/files/${input}
213
214			if (( ${my_input} == -1 )); then
215			break
216			fi
217			done
218			echo
219			rm ${TMP}/files/${input}
220			count=${count}-1
221			}
222
223			function do_cfg() {
224
225			local file="${1}"
226			local ofile="${2}"
227			local -i my_input=0
228
229			until (( ${my_input} == -1 )) \|\| [ ! -f ${file} ]; do
230			if [ "${OVERWRITE_ALL}" == "yes" ]; then
231			my_input=1
232			else
233			showdiffcmd=$(echo "${diff_command}" \|
234			sed -e "s:%file1:${ofile}:" -e "s:%file2:${file}:")
235
236			if [ "${using_editor}" == 0 ]; then
237			(
238			echo "Showing differences between ${ofile} and ${file}"
239			${showdiffcmd}
240			) \| ${pager}
241			else
242			echo "Beginning of differences between ${ofile} and ${file}"
243			${showdiffcmd}
244			echo "End of differences between ${ofile} and ${file}"
245			fi
246			if [ -L "${file}" ]; then
247			echo
248			echo "-------------------------------------------------------------"
249			echo "NOTE: File is a symlink to another file. REPLACE recommended."
250			echo " The original file may simply have moved. Please review."
251			echo "-------------------------------------------------------------"
252			echo
253			fi
254			echo -n "1) Replace original with update
255			2) Delete update, keeping original as is
256			3) Interactively merge original with update
257			4) Show differences again
258			Please select from the menu above (-1 to ignore this update): "
259			read my_input
260			fi
261
262			case ${my_input} in
263			1) echo "Replacing ${ofile} with ${file}"
264			mv ${mv_opts} ${file} ${ofile}
265	niro	283	my_input=-1
266	niro	24	continue
267			;;
268			2) echo "Deleting ${file}"
269			rm ${rm_opts} ${file}
270			continue
271			;;
272			3) do_merge "${file}" "${ofile}"
273			my_input=${?}
274			# [ ${my_input} == 255 ] && my_input=-1
275			continue
276			;;
277			4) continue
278			;;
279			*) continue
280			;;
281			esac
282			done
283			}
284
285			function do_merge() {
286
287			local file="${1}"
288			local ofile="${2}"
289			local mfile="${2}.merged"
290			local -i my_input=0
291			echo "${file} ${ofile} ${mfile}"
292
293			if [ -e ${mfile} ] ; then
294			echo "A previous version of the merged file exists, cleaning..."
295			rm ${rm_opts} ${mfile}
296			fi
297
298			until (( ${my_input} == -1 )); do
299			echo "Merging ${file} and ${ofile}"
300			`echo "${merge_command}" \|
301			sed -e "s:%merged:${mfile}:g" \
302			-e "s:%orig:${ofile}:g" \
303			-e "s:%new:${file}:g"`
304			until (( ${my_input} == -1 )); do
305			echo -n "1) Replace ${ofile} with merged file
306			2) Show differences between merged file and original
307			3) Remerge original with update
308			4) Edit merged file
309			5) Return to the previous menu
310			Please select from the menu above (-1 to exit, losing this merge): "
311			read my_input
312			case ${my_input} in
313			1) echo "Replacing ${ofile} with ${mfile}"
314	niro	2637	# busybox does not support --reference
315			if ! chmod --reference=${ofile} ${mfile} > /dev/null 2&>1
316			then
317			chmod $(stat -c %a ${ofile}) ${mfile}
318			fi
319	niro	24	mv ${mv_opts} ${mfile} ${ofile}
320			rm ${rm_opts} ${file}
321			return 255
322			;;
323			2) ( echo "Showing differences between ${ofile} and ${mfile}"
324			`echo "${diff_command}" \| \
325			sed -e "s:%file1:${ofile}:" \
326			-e "s:%file2:${mfile}:"` ) \| ${pager}
327			continue
328			;;
329			3) break
330			;;
331			4) ${EDITOR:-nano -w} "${mfile}"
332			continue
333			;;
334			5) rm ${rm_opts} ${mfile}
335			return 0
336			;;
337			*) continue
338			;;
339			esac
340			done
341			done
342			rm ${rm_opts} ${mfile}
343			return 255
344			}
345
346			function die() {
347			trap "" term
348			trap "" kill
349			echo "Exiting: ${1}"
350			rm -rf ${TMP}
351			exit ${2}
352			}
353
354			#
355			# Run the script
356			#
357			scriptname=`basename $0`
358
359			trap die term
360
361	niro	283	TMP="/tmp/$$"
362	niro	24	rm -rf ${TMP} 2> /dev/null
363			mkdir ${TMP} \|\| die "failed mkdir command!" 1
364
365			# I need the CONFIG_PROTECT value
366			#CONFIG_PROTECT=$(/usr/lib/portage/bin/portageq config_protect)
367			#CONFIG_PROTECT_MASK=$(/usr/lib/portage/bin/portageq config_protect_mask)
368			source /etc/profile
369
370			# load etc-config's configuration
371			EU_AUTOMERGE=`get_config eu_automerge`
372			rm_opts=`get_config rm_opts`
373			mv_opts=`get_config mv_opts`
374			cp_opts=`get_config cp_opts`
375			pager=`get_config pager`
376			diff_command=`get_config diff_command`
377			using_editor=`get_config using_editor`
378			merge_command=`get_config merge_command`
379			declare -i mode=`get_config mode`
380			[ -z ${mode} ] && mode=0
381			[ -z "${pager}" ] && pager="cat"
382
383			#echo "rm_opts: $rm_opts, mv_opts: $mv_opts, cp_opts: $cp_opts"
384			#echo "pager: $pager, diff_command: $diff_command, merge_command: $merge_command"
385
386			if (( ${mode} == 0 )); then
387			PAR=")"
388			else
389			PAR=""
390			fi
391
392			declare -i count=0
393			declare -i input=0
394			declare title="Gentoolkit's etc-update tool!"
395
396			scan
397
398			until (( ${input} == -1 )); do
399			if (( ${count} == 0 )); then
400			die "Nothing left to do; exiting. :)" 0
401			fi
402			sel_file
403			if (( ${input} != -1 )); then
404			do_file
405			fi
406			done
407
408			die "User termination!" 0