mage-next/src/etc-update.in

#!/bin/bash
# $Id$
#
# Copyright 1999-2004 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: /home/cvsd/magellan-cvs/magellan-src/mage/usr/lib/mage/etc-update,v 1.7 2005-10-26 08:11:30 niro Exp $

# Author Brandon Low <lostlogic@gentoo.org>
#
# Previous version (from which I've borrowed a few bits) by:
# Jochem Kossen <j.kossen@home.nl>
# Leo Lipelis <aeoo@gentoo.org>
# Karl Trygve Kalleberg <karltk@gentoo.org>
#

# Modified by Niels Rogalla <niro@magellan-linux.de> to use this with Magellan-Linux
# version: 0.4.0-r8

function get_config() {
	item=$1

	# First strip off comment lines, then grab the configuration
	# item. If there's more than one of the same configuration item,
	# then allow the last setting to take precedence.
	cut -d'#' -f1-1 /etc/etc-update.conf | \
		sed -ne "s/^ *$item *= *\([\"']\{0,1\}\)\(.*\)\1/\2/p" |sed -e '$p;d'
}

function scan() {

	echo "Scanning Configuration files..."
	rm -rf ${TMP}/files > /dev/null 2>&1
	mkdir ${TMP}/files || die "Failed mkdir command!" 1
	count=0
	input=0
	
	for path in ${CONFIG_PROTECT}; do if [ -d ${path} ]; then
		ofile=""
		for file in `find ${path}/ -iname "._cfg????_*" |
			   sed -e "s:\(^.*/\)\(\._cfg[0-9]*_\)\(.*$\):\1\2\3\%\2\%\3:" |
			   sort -t'%' -k3 -k2 | LANG=POSIX LC_ALL=POSIX cut -f1 -d'%'`; do
			rpath=`echo "${file/\/\///}" | sed -e "s:/[^/]*$::"`
			rfile=`echo "${file/\/\///}" | sed -e "s:^.*/::"`
			for mpath in ${CONFIG_PROTECT_MASK}; do
				if [[ "${rpath}" == "${mpath}"* ]]; then
					mv ${rpath}/${rfile} ${rpath}/${rfile:10}
					break
				fi
			done
			[ ! -f ${file} ] && continue


			if [[ "${ofile:10}" != "${rfile:10}" ]] || 
			   [[ ${opath} != ${rpath} ]]; then
				MATCHES=0
				if [[ "${EU_AUTOMERGE}" == "yes" ]]; then
					if [ ! -e "${rpath}/${rfile}" ] || [ ! -e "${rpath}/${rfile:10}" ]; then
						MATCHES=0
					else
						diff -Bbua ${rpath}/${rfile} ${rpath}/${rfile:10} | egrep '^[+-]' | egrep -v '^[+-][\t ]*#|^--- |^\+\+\+ ' | egrep -qv '^[-+][\t ]*$'
						MATCHES=$?
					fi
				elif [[ -z `diff -Nua ${rpath}/${rfile} ${rpath}/${rfile:10}|
							  grep "^[+-][^+-]"|grep -v '# .Header:.*'` ]]; then
					MATCHES=1
				fi
				if [[ "${MATCHES}" == "1" ]]; then
					echo "Automerging trivial changes in: ${rfile:10}"
					mv ${rpath}/${rfile} ${rpath}/${rfile:10}
					continue
				else
					count=${count}+1
					echo "${rpath}/${rfile:10}" > ${TMP}/files/${count}
					echo "${rpath}/${rfile}" >> ${TMP}/files/${count}
					ofile="${rfile}"
					opath="${rpath}"
					continue
				fi
			fi

			if [[ -z `diff -Nua ${rpath}/${rfile} ${rpath}/${ofile}|
					  grep "^[+-][^+-]"|grep -v '# .Header:.*'` ]]; then
				mv ${rpath}/${rfile} ${rpath}/${ofile}
				continue
			else
				echo "${rpath}/${rfile}" >> ${TMP}/files/${count}
				ofile="${rfile}"
				opath="${rpath}"
			fi
		done
	fi; done

}

function sel_file() {
	local -i isfirst=0
	until [ -f ${TMP}/files/${input} ] || [ ${input} == -1 ] || [ ${input} == -3 ]; do
		for file in `ls ${TMP}/files|sort -n`; do
			if (( ${isfirst} == 0 )); then
				isfirst=${file}
			fi
			echo -n "${file}${PAR} "
			if (( ${mode} == 0 )); then
				for word in `cat ${TMP}/files/${file}`; do
					echo ${word}
				done
			else
				head -n1 ${TMP}/files/${file}
			fi
		done > ${TMP}/menuitems

		if [ "${OVERWRITE_ALL}" == "yes" ]; then
			input=0
		else
			if (( ${mode} == 0 )); then
				echo "The following is the list of files which need updating, each 
configuration file is followed by a list of possible replacement files."
			else
				local my_title="Please select a file to update"
			fi

			if (( ${mode} == 0 )); then
				cat ${TMP}/menuitems
				echo    "Please select a file to edit by entering the corresponding number."
				echo    "              (don't use -3 or -5 if you're unsure what to do)"
				echo    "              (-1 to exit) (-3 to auto merge all remaining files)"
				echo -n "                           (-5 to auto-merge AND not use 'mv -i'): "
				read input
			else
				dialog --title "${title}" --menu "${my_title}" \
					0 0 0 `echo "-1 Exit";cat ${TMP}/menuitems` \
					2> ${TMP}/input
				input=`cat ${TMP}/input`
			fi
			if (( ${input} == -5 )); then
				input=-3
				export mv_opts=""
			fi
			if (( ${input} == -3 )); then
				input=0
				export OVERWRITE_ALL="yes"
			fi
		fi # -3 automerge
		if (( ${input} == 0 )); then
			input=${isfirst}
		fi
	done
}

function do_file() {
	echo
	local -i my_input
	local -i fcount=0
	until (( `cat ${TMP}/files/${input}|wc -l` < 2 )); do
		my_input=0
		if (( `cat ${TMP}/files/${input}|wc -l` == 2 )); then
			my_input=1
		fi
		until (( ${my_input} > 0 )) && (( ${my_input} < `cat ${TMP}/files/${input}|wc -l` )); do
			fcount=0

			if [ "${OVERWRITE_ALL}" == "yes" ]; then
				my_input=0
			else
				for line in `cat ${TMP}/files/${input}`; do
					if (( ${fcount} > 0 )); then
						echo -n "${fcount}${PAR} "
						echo "${line}"
					else
						if (( ${mode} == 0 )); then
							echo "Below are the new config files for ${line}:"
						else
							local my_title="Please select a file to process for ${line}"
						fi
					fi
					fcount=${fcount}+1
				done > ${TMP}/menuitems

				if (( ${mode} == 0 )); then
					cat ${TMP}/menuitems
					echo -n "Please select a file to process (-1 to exit this file): "
					read my_input
				else
					dialog --title "${title}" --menu "${my_title}" \
						0 0 0 `cat ${TMP}/menuitems;echo "${fcount} Exit"` \
						2> ${TMP}/input
					my_input=`cat ${TMP}/input`
				fi
			fi # OVERWRITE_ALL

			if (( ${my_input} == 0 )); then
				my_input=1
			elif (( ${my_input} == -1 )); then
				input=0 
				return
			elif (( ${my_input} == ${fcount} )); then
				break
			fi
		done
		if (( ${my_input} == ${fcount} )); then
			break
		fi

		fcount=${my_input}+1

		file=`cat ${TMP}/files/${input} | sed -e "${fcount}p;d"`
		ofile=`head -n1 ${TMP}/files/${input}`

		do_cfg "${file}" "${ofile}"

		cat ${TMP}/files/${input}|sed -e "${fcount}!p;d" > ${TMP}/files/sed
		mv ${TMP}/files/sed ${TMP}/files/${input}

		if (( ${my_input} == -1 )); then
			break
		fi
	done
	echo
	rm ${TMP}/files/${input}
	count=${count}-1
}

function do_cfg() {
	
	local file="${1}"
	local ofile="${2}"
	local -i my_input=0
	
	until (( ${my_input} == -1 )) || [ ! -f ${file} ]; do
		if [ "${OVERWRITE_ALL}" == "yes" ]; then
			my_input=1
		else
		  showdiffcmd=$(echo "${diff_command}" |
				sed -e "s:%file1:${ofile}:" -e "s:%file2:${file}:")
				
			if [ "${using_editor}" == 0 ]; then
				(
					echo "Showing differences between ${ofile} and ${file}"
					${showdiffcmd}
				) | ${pager}
			else
				echo "Beginning of differences between ${ofile} and ${file}"
				${showdiffcmd}
				echo "End of differences between ${ofile} and ${file}"
			fi
			if [ -L "${file}" ]; then
				echo
				echo "-------------------------------------------------------------"
				echo "NOTE: File is a symlink to another file. REPLACE recommended."
				echo "      The original file may simply have moved. Please review."
				echo "-------------------------------------------------------------"
				echo
			fi
			echo -n "1) Replace original with update
2) Delete update, keeping original as is
3) Interactively merge original with update
4) Show differences again
Please select from the menu above (-1 to ignore this update): "
			read my_input
		fi
		
		case ${my_input} in
			1) echo "Replacing ${ofile} with ${file}"
			   mv ${mv_opts} ${file} ${ofile}
			   my_input=-1
			   continue
			   ;;
			2) echo "Deleting ${file}"
			   rm ${rm_opts} ${file}
			   continue
			   ;;
			3) do_merge "${file}" "${ofile}"
			   my_input=${?}
#			   [ ${my_input} == 255 ] && my_input=-1
			   continue
			   ;;
			4) continue
			   ;;
			*) continue
			   ;;
		esac
	done
}

function do_merge() {
	
	local file="${1}"
	local ofile="${2}"
	local mfile="${2}.merged"
	local -i my_input=0
	echo "${file} ${ofile} ${mfile}"

	if [ -e ${mfile} ] ; then
		echo "A previous version of the merged file exists, cleaning..."
		rm ${rm_opts} ${mfile}
	fi

	until (( ${my_input} == -1 )); do
		echo "Merging ${file} and ${ofile}"
		`echo "${merge_command}" |
		 sed -e "s:%merged:${mfile}:g" \
		 	 -e "s:%orig:${ofile}:g" \
			 -e "s:%new:${file}:g"`
		until (( ${my_input} == -1 )); do	
			echo -n "1) Replace ${ofile} with merged file
2) Show differences between merged file and original
3) Remerge original with update
4) Edit merged file
5) Return to the previous menu
Please select from the menu above (-1 to exit, losing this merge): "
			read my_input
			case ${my_input} in
				1) echo "Replacing ${ofile} with ${mfile}"
				   chmod --reference=${ofile} ${mfile}
				   mv ${mv_opts} ${mfile} ${ofile}
				   rm ${rm_opts} ${file}
				   return 255
				   ;;
				2) ( echo "Showing differences between ${ofile} and ${mfile}"
					 `echo "${diff_command}" | \
					  sed -e "s:%file1:${ofile}:" \
					  	  -e "s:%file2:${mfile}:"` ) | ${pager}
				   continue
				   ;;
				3) break
				   ;;
				4) ${EDITOR:-nano -w} "${mfile}"
				   continue
					 ;;
				5) rm ${rm_opts} ${mfile}
				   return 0
				   ;;
				*) continue
				   ;;
			esac
		done
	done
	rm ${rm_opts} ${mfile}
	return 255
}

function die() {
	trap "" term
	trap "" kill
	echo "Exiting: ${1}"
	rm -rf ${TMP}
	exit ${2}
}

#
# Run the script
#
scriptname=`basename $0`

trap die term

TMP="/tmp/$$"
rm -rf ${TMP} 2> /dev/null
mkdir ${TMP} || die "failed mkdir command!" 1

# I need the CONFIG_PROTECT value
#CONFIG_PROTECT=$(/usr/lib/portage/bin/portageq config_protect)
#CONFIG_PROTECT_MASK=$(/usr/lib/portage/bin/portageq config_protect_mask)
source /etc/profile

# load etc-config's configuration
EU_AUTOMERGE=`get_config eu_automerge`
rm_opts=`get_config rm_opts`
mv_opts=`get_config mv_opts`
cp_opts=`get_config cp_opts`
pager=`get_config pager`
diff_command=`get_config diff_command`
using_editor=`get_config using_editor`
merge_command=`get_config merge_command`
declare -i mode=`get_config mode`
[ -z ${mode} ] && mode=0
[ -z "${pager}" ] && pager="cat"

#echo "rm_opts: $rm_opts, mv_opts: $mv_opts, cp_opts: $cp_opts"
#echo "pager: $pager, diff_command: $diff_command, merge_command: $merge_command" 

if (( ${mode} == 0 )); then
	PAR=")"
else
	PAR=""
fi

declare -i count=0
declare -i input=0
declare title="Gentoolkit's etc-update tool!"

scan

until (( ${input} == -1 )); do
	if (( ${count} == 0 )); then
		die "Nothing left to do; exiting. :)" 0
	fi
	sel_file
	if (( ${input} != -1 )); then
		do_file
	fi
done

die "User termination!" 0
1	#!/bin/bash
2	# $Id$
3	#
4	# Copyright 1999-2004 Gentoo Foundation
5	# Distributed under the terms of the GNU General Public License v2
6	# $Header: /home/cvsd/magellan-cvs/magellan-src/mage/usr/lib/mage/etc-update,v 1.7 2005-10-26 08:11:30 niro Exp $
7
8	# Author Brandon Low <lostlogic@gentoo.org>
9	#
10	# Previous version (from which I've borrowed a few bits) by:
11	# Jochem Kossen <j.kossen@home.nl>
12	# Leo Lipelis <aeoo@gentoo.org>
13	# Karl Trygve Kalleberg <karltk@gentoo.org>
14	#
15
16	# Modified by Niels Rogalla <niro@magellan-linux.de> to use this with Magellan-Linux
17	# version: 0.4.0-r8
18
19	function get_config() {
20	item=$1
21
22	# First strip off comment lines, then grab the configuration
23	# item. If there's more than one of the same configuration item,
24	# then allow the last setting to take precedence.
25	cut -d'#' -f1-1 /etc/etc-update.conf \| \
26	sed -ne "s/^ $item = \([\"']\{0,1\}\)\(.\)\1/\2/p" \|sed -e '$p;d'
27	}
28
29	function scan() {
30
31	echo "Scanning Configuration files..."
32	rm -rf ${TMP}/files > /dev/null 2>&1
33	mkdir ${TMP}/files \|\| die "Failed mkdir command!" 1
34	count=0
35	input=0
36
37	for path in ${CONFIG_PROTECT}; do if [ -d ${path} ]; then
38	ofile=""
39	for file in `find ${path}/ -iname "._cfg????_*" \|
40	sed -e "s:\(^./\)\(\._cfg[0-9]_\)\(.*$\):\1\2\3\%\2\%\3:" \|
41	sort -t'%' -k3 -k2 \| LANG=POSIX LC_ALL=POSIX cut -f1 -d'%'`; do
42	rpath=`echo "${file/\/\///}" \| sed -e "s:/[^/]*$::"`
43	rfile=`echo "${file/\/\///}" \| sed -e "s:^.*/::"`
44	for mpath in ${CONFIG_PROTECT_MASK}; do
45	if [[ "${rpath}" == "${mpath}"* ]]; then
46	mv ${rpath}/${rfile} ${rpath}/${rfile:10}
47	break
48	fi
49	done
50	[ ! -f ${file} ] && continue
51
52
53	if [[ "${ofile:10}" != "${rfile:10}" ]] \|\|
54	[[ ${opath} != ${rpath} ]]; then
55	MATCHES=0
56	if [[ "${EU_AUTOMERGE}" == "yes" ]]; then
57	if [ ! -e "${rpath}/${rfile}" ] \|\| [ ! -e "${rpath}/${rfile:10}" ]; then
58	MATCHES=0
59	else
60	diff -Bbua ${rpath}/${rfile} ${rpath}/${rfile:10} \| egrep '^[+-]' \| egrep -v '^[+-][\t ]#\|^--- \|^\+\+\+ ' \| egrep -qv '^[-+][\t ]$'
61	MATCHES=$?
62	fi
63	elif [[ -z `diff -Nua ${rpath}/${rfile} ${rpath}/${rfile:10}\|
64	grep "^[+-][^+-]"\|grep -v '# .Header:.*'` ]]; then
65	MATCHES=1
66	fi
67	if [[ "${MATCHES}" == "1" ]]; then
68	echo "Automerging trivial changes in: ${rfile:10}"
69	mv ${rpath}/${rfile} ${rpath}/${rfile:10}
70	continue
71	else
72	count=${count}+1
73	echo "${rpath}/${rfile:10}" > ${TMP}/files/${count}
74	echo "${rpath}/${rfile}" >> ${TMP}/files/${count}
75	ofile="${rfile}"
76	opath="${rpath}"
77	continue
78	fi
79	fi
80
81	if [[ -z `diff -Nua ${rpath}/${rfile} ${rpath}/${ofile}\|
82	grep "^[+-][^+-]"\|grep -v '# .Header:.*'` ]]; then
83	mv ${rpath}/${rfile} ${rpath}/${ofile}
84	continue
85	else
86	echo "${rpath}/${rfile}" >> ${TMP}/files/${count}
87	ofile="${rfile}"
88	opath="${rpath}"
89	fi
90	done
91	fi; done
92
93	}
94
95	function sel_file() {
96	local -i isfirst=0
97	until [ -f ${TMP}/files/${input} ] \|\| [ ${input} == -1 ] \|\| [ ${input} == -3 ]; do
98	for file in `ls ${TMP}/files\|sort -n`; do
99	if (( ${isfirst} == 0 )); then
100	isfirst=${file}
101	fi
102	echo -n "${file}${PAR} "
103	if (( ${mode} == 0 )); then
104	for word in `cat ${TMP}/files/${file}`; do
105	echo ${word}
106	done
107	else
108	head -n1 ${TMP}/files/${file}
109	fi
110	done > ${TMP}/menuitems
111
112	if [ "${OVERWRITE_ALL}" == "yes" ]; then
113	input=0
114	else
115	if (( ${mode} == 0 )); then
116	echo "The following is the list of files which need updating, each
117	configuration file is followed by a list of possible replacement files."
118	else
119	local my_title="Please select a file to update"
120	fi
121
122	if (( ${mode} == 0 )); then
123	cat ${TMP}/menuitems
124	echo "Please select a file to edit by entering the corresponding number."
125	echo " (don't use -3 or -5 if you're unsure what to do)"
126	echo " (-1 to exit) (-3 to auto merge all remaining files)"
127	echo -n " (-5 to auto-merge AND not use 'mv -i'): "
128	read input
129	else
130	dialog --title "${title}" --menu "${my_title}" \
131	0 0 0 `echo "-1 Exit";cat ${TMP}/menuitems` \
132	2> ${TMP}/input
133	input=`cat ${TMP}/input`
134	fi
135	if (( ${input} == -5 )); then
136	input=-3
137	export mv_opts=""
138	fi
139	if (( ${input} == -3 )); then
140	input=0
141	export OVERWRITE_ALL="yes"
142	fi
143	fi # -3 automerge
144	if (( ${input} == 0 )); then
145	input=${isfirst}
146	fi
147	done
148	}
149
150	function do_file() {
151	echo
152	local -i my_input
153	local -i fcount=0
154	until (( `cat ${TMP}/files/${input}\|wc -l` < 2 )); do
155	my_input=0
156	if (( `cat ${TMP}/files/${input}\|wc -l` == 2 )); then
157	my_input=1
158	fi
159	until (( ${my_input} > 0 )) && (( ${my_input} < `cat ${TMP}/files/${input}\|wc -l` )); do
160	fcount=0
161
162	if [ "${OVERWRITE_ALL}" == "yes" ]; then
163	my_input=0
164	else
165	for line in `cat ${TMP}/files/${input}`; do
166	if (( ${fcount} > 0 )); then
167	echo -n "${fcount}${PAR} "
168	echo "${line}"
169	else
170	if (( ${mode} == 0 )); then
171	echo "Below are the new config files for ${line}:"
172	else
173	local my_title="Please select a file to process for ${line}"
174	fi
175	fi
176	fcount=${fcount}+1
177	done > ${TMP}/menuitems
178
179	if (( ${mode} == 0 )); then
180	cat ${TMP}/menuitems
181	echo -n "Please select a file to process (-1 to exit this file): "
182	read my_input
183	else
184	dialog --title "${title}" --menu "${my_title}" \
185	0 0 0 `cat ${TMP}/menuitems;echo "${fcount} Exit"` \
186	2> ${TMP}/input
187	my_input=`cat ${TMP}/input`
188	fi
189	fi # OVERWRITE_ALL
190
191	if (( ${my_input} == 0 )); then
192	my_input=1
193	elif (( ${my_input} == -1 )); then
194	input=0
195	return
196	elif (( ${my_input} == ${fcount} )); then
197	break
198	fi
199	done
200	if (( ${my_input} == ${fcount} )); then
201	break
202	fi
203
204	fcount=${my_input}+1
205
206	file=`cat ${TMP}/files/${input} \| sed -e "${fcount}p;d"`
207	ofile=`head -n1 ${TMP}/files/${input}`
208
209	do_cfg "${file}" "${ofile}"
210
211	cat ${TMP}/files/${input}\|sed -e "${fcount}!p;d" > ${TMP}/files/sed
212	mv ${TMP}/files/sed ${TMP}/files/${input}
213
214	if (( ${my_input} == -1 )); then
215	break
216	fi
217	done
218	echo
219	rm ${TMP}/files/${input}
220	count=${count}-1
221	}
222
223	function do_cfg() {
224
225	local file="${1}"
226	local ofile="${2}"
227	local -i my_input=0
228
229	until (( ${my_input} == -1 )) \|\| [ ! -f ${file} ]; do
230	if [ "${OVERWRITE_ALL}" == "yes" ]; then
231	my_input=1
232	else
233	showdiffcmd=$(echo "${diff_command}" \|
234	sed -e "s:%file1:${ofile}:" -e "s:%file2:${file}:")
235
236	if [ "${using_editor}" == 0 ]; then
237	(
238	echo "Showing differences between ${ofile} and ${file}"
239	${showdiffcmd}
240	) \| ${pager}
241	else
242	echo "Beginning of differences between ${ofile} and ${file}"
243	${showdiffcmd}
244	echo "End of differences between ${ofile} and ${file}"
245	fi
246	if [ -L "${file}" ]; then
247	echo
248	echo "-------------------------------------------------------------"
249	echo "NOTE: File is a symlink to another file. REPLACE recommended."
250	echo " The original file may simply have moved. Please review."
251	echo "-------------------------------------------------------------"
252	echo
253	fi
254	echo -n "1) Replace original with update
255	2) Delete update, keeping original as is
256	3) Interactively merge original with update
257	4) Show differences again
258	Please select from the menu above (-1 to ignore this update): "
259	read my_input
260	fi
261
262	case ${my_input} in
263	1) echo "Replacing ${ofile} with ${file}"
264	mv ${mv_opts} ${file} ${ofile}
265	my_input=-1
266	continue
267	;;
268	2) echo "Deleting ${file}"
269	rm ${rm_opts} ${file}
270	continue
271	;;
272	3) do_merge "${file}" "${ofile}"
273	my_input=${?}
274	# [ ${my_input} == 255 ] && my_input=-1
275	continue
276	;;
277	4) continue
278	;;
279	*) continue
280	;;
281	esac
282	done
283	}
284
285	function do_merge() {
286
287	local file="${1}"
288	local ofile="${2}"
289	local mfile="${2}.merged"
290	local -i my_input=0
291	echo "${file} ${ofile} ${mfile}"
292
293	if [ -e ${mfile} ] ; then
294	echo "A previous version of the merged file exists, cleaning..."
295	rm ${rm_opts} ${mfile}
296	fi
297
298	until (( ${my_input} == -1 )); do
299	echo "Merging ${file} and ${ofile}"
300	`echo "${merge_command}" \|
301	sed -e "s:%merged:${mfile}:g" \
302	-e "s:%orig:${ofile}:g" \
303	-e "s:%new:${file}:g"`
304	until (( ${my_input} == -1 )); do
305	echo -n "1) Replace ${ofile} with merged file
306	2) Show differences between merged file and original
307	3) Remerge original with update
308	4) Edit merged file
309	5) Return to the previous menu
310	Please select from the menu above (-1 to exit, losing this merge): "
311	read my_input
312	case ${my_input} in
313	1) echo "Replacing ${ofile} with ${mfile}"
314	chmod --reference=${ofile} ${mfile}
315	mv ${mv_opts} ${mfile} ${ofile}
316	rm ${rm_opts} ${file}
317	return 255
318	;;
319	2) ( echo "Showing differences between ${ofile} and ${mfile}"
320	`echo "${diff_command}" \| \
321	sed -e "s:%file1:${ofile}:" \
322	-e "s:%file2:${mfile}:"` ) \| ${pager}
323	continue
324	;;
325	3) break
326	;;
327	4) ${EDITOR:-nano -w} "${mfile}"
328	continue
329	;;
330	5) rm ${rm_opts} ${mfile}
331	return 0
332	;;
333	*) continue
334	;;
335	esac
336	done
337	done
338	rm ${rm_opts} ${mfile}
339	return 255
340	}
341
342	function die() {
343	trap "" term
344	trap "" kill
345	echo "Exiting: ${1}"
346	rm -rf ${TMP}
347	exit ${2}
348	}
349
350	#
351	# Run the script
352	#
353	scriptname=`basename $0`
354
355	trap die term
356
357	TMP="/tmp/$$"
358	rm -rf ${TMP} 2> /dev/null
359	mkdir ${TMP} \|\| die "failed mkdir command!" 1
360
361	# I need the CONFIG_PROTECT value
362	#CONFIG_PROTECT=$(/usr/lib/portage/bin/portageq config_protect)
363	#CONFIG_PROTECT_MASK=$(/usr/lib/portage/bin/portageq config_protect_mask)
364	source /etc/profile
365
366	# load etc-config's configuration
367	EU_AUTOMERGE=`get_config eu_automerge`
368	rm_opts=`get_config rm_opts`
369	mv_opts=`get_config mv_opts`
370	cp_opts=`get_config cp_opts`
371	pager=`get_config pager`
372	diff_command=`get_config diff_command`
373	using_editor=`get_config using_editor`
374	merge_command=`get_config merge_command`
375	declare -i mode=`get_config mode`
376	[ -z ${mode} ] && mode=0
377	[ -z "${pager}" ] && pager="cat"
378
379	#echo "rm_opts: $rm_opts, mv_opts: $mv_opts, cp_opts: $cp_opts"
380	#echo "pager: $pager, diff_command: $diff_command, merge_command: $merge_command"
381
382	if (( ${mode} == 0 )); then
383	PAR=")"
384	else
385	PAR=""
386	fi
387
388	declare -i count=0
389	declare -i input=0
390	declare title="Gentoolkit's etc-update tool!"
391
392	scan
393
394	until (( ${input} == -1 )); do
395	if (( ${count} == 0 )); then
396	die "Nothing left to do; exiting. :)" 0
397	fi
398	sel_file
399	if (( ${input} != -1 )); then
400	do_file
401	fi
402	done
403
404	die "User termination!" 0