--- trunk/mkinitrd-magellan/grubby/new-kernel-pkg	2009/10/28 13:29:18	925
+++ trunk/grubby/new-kernel-pkg	2012/02/18 00:21:34	1702
@@ -40,11 +40,17 @@
 fi
 
 [ -f /etc/conf.d/grubby ] && . /etc/conf.d/grubby
+[ -f /etc/conf.d/grubby-uboot ] && . /etc/conf.d/grubby-uboot
 
+cfgGrub2=""
+cfgGrub2Efi=""
 cfgGrub=""
 cfgLilo=""
+cfguBoot=""
 runLilo=""
 grubConfig=""
+grub2Config=""
+grub2EfiConfig=""
 
 ARCH=$(uname -m)
 
@@ -77,10 +83,25 @@
 	lilo=/sbin/zipl
 	runLilo="yes"
 	isx86=""
+elif [[ ${ARCH} = armv7l ]]
+then
+	liloConfig=""
+	bootPrefix=/boot
+	ubootDir=${UBOOT_DIR:-"/boot/uboot"}
+	ubootScript=$ubootDir/${UBOOT_SCR:-"boot.scr"}
+	ubootKList=${UBOOT_KLIST:-"klist.txt"}
+	ubootDevice=/dev/${UBOOT_DEVICE:-"mmcblk0p1"}
+	ubootDefaultImage=${UBOOT_UIMAGE:-"uImage"}
+	ubootDefaultInitrd=${UBOOT_UINITRD:-"uInitrd"}
+	mounted=""
+	liloFlag=""
+	isx86=""
 else
 	# this leaves i?86 and x86_64
 	liloConfig=/etc/lilo.conf
 	grubConfig=/boot/grub/grub.conf
+	grub2Config=/boot/grub/grub.cfg
+	grub2EfiConfig=/boot/grub/grub-efi.cfg
 	bootPrefix=/boot
 	liloFlag=lilo
 	isx86="yes"
@@ -89,6 +110,8 @@
 mode=""
 version=""
 initrd=""
+dracut=""
+dracuthostonly=""
 initrdfile=""
 moddep=""
 verbose=""
@@ -96,14 +119,18 @@
 package=""
 mbkernel=""
 mbargs=""
+adddracutargs=""
+addplymouthinitrd=""
 
 usage()
 {
-	echo "Usage: $(basename $0) [-v] [--mkinitrd] [--rminitrd]" >&2
+	echo "Usage: $(basename $0) [-v] [--mkinitrd] [--rminitrd] [--dracut]" >&2
 	echo "       [--initrdfile=<initrd-image>] [--depmod] [--rmmoddep]" >&2
-	echo "       [--kernel-args=<args>] [--remove-args=<args>]" >&2 
+	echo "       [--kernel-args=<args>] [--remove-args=<args>]" >&2
 	echo "       [--banner=<banner>] [--multiboot=multiboot]" >&2
-	echo "       [--mbargs=mbargs] [--make-default]" >&2
+	echo "       [--mbargs=mbargs] [--make-default] [--add-dracut-args]" >&2
+	echo "       [--add-plymouth-initrd]" >&2
+	echo "       [--host-only]" >&2
 	echo "       <--install | --remove | --update> <kernel-version>" >&2
 	echo "       (ex: $(basename $0) --mkinitrd --depmod --install 2.4.7-2)" >&2
 	exit 1
@@ -123,6 +150,11 @@
 	then
 		[[ -n ${verbose} ]] && echo "found ${initrdfile} and using it with grubby"
 		INITRD="--initrd ${initrdfile}"
+
+		if [[ -n ${addplymouthinitrd} ]]
+		then
+			INITRD="${INITRD} --extra-initrd ${bootPrefix}/initrd-plymouth.img"
+		fi
 	fi
 
 	# FIXME: is this a good heuristic to find out if we're on iSeries?
@@ -163,12 +195,56 @@
 		else
 			title="Magellan Linux (${version})"
 		fi
-		${grubby} --add-kernel=${bootPrefix}/${kernelName}-${version} \
+		${grubby} --grub --add-kernel=${bootPrefix}/${kernelName}-${version} \
 			${INITRD} --copy-default ${makedefault} --title "${title}" \
 			${mbkernel:+--add-multiboot="${mbkernel}"} ${mbargs:+--mbargs="${mbargs}"} \
 			--args="root=${rootdevice} ${kernargs}" --remove-kernel="TITLE=${title}"
 	else
-		[[ -n ${verbose} ]] && echo "${grubConfig} does not exist, not running grubby"
+		[[ -n ${verbose} ]] && echo "${grubConfig} does not exist, not running grubby for grub 0.97"
+	fi
+	if [[ -n ${cfgGrub2} ]]
+	then
+		[[ -n ${verbose} ]] && echo "adding ${version} to ${grub2Config}"
+
+		if [[ -n ${banner} ]]
+		then
+			title="${banner} (${version})"
+		elif [ -f /etc/mageversion ]
+		then
+			title="Magellan Linux $(< /etc/mageversion) (${version})"
+		else
+			title="Magellan Linux (${version})"
+		fi
+		${grubby} --grub2 -c ${grub2Config} \
+			--add-kernel=${bootPrefix}/${kernelName}-${version} \
+			${INITRD} --copy-default ${makedefault} --title "${title}" \
+			${mbkernel:+--add-multiboot="${mbkernel}"} \
+			${mbargs:+--mbargs="${mbargs}"} \
+			--args="root=${rootdevice} ${kernargs}" --remove-kernel="TITLE=${title}"
+	else
+		[[ -n ${verbose} ]] && echo "${grub2Config} does not exist, not running grubby for grub 2"
+	fi
+	if [[ -n ${cfgGrub2Efi} ]]
+	then
+		[[ -n ${verbose} ]] && echo "adding ${version} to ${grub2EfiConfig}"
+
+		if [[ -n ${banner} ]]
+		then
+			title="${banner} (${version})"
+		elif [ -f /etc/mageversion ]
+		then
+			title="Magellan Linux $(< /etc/mageversion) (${version})"
+		else
+			title="Magellan Linux (${version})"
+		fi
+		${grubby} --grub2 -c ${grub2EfiConfig} \
+			--add-kernel=${bootPrefix}/${kernelName}-${version} \
+			${INITRD} --copy-default ${makedefault} --title "${title}" \
+			${mbkernel:+--add-multiboot="${mbkernel}"} \
+			${mbargs:+--mbargs="${mbargs}"} \
+			--args="root=${rootdevice} ${kernargs}" --remove-kernel="TITLE=${title}"
+	else
+		[[ -n ${verbose} ]] && echo "${grub2EfiConfig} does not exist, not running grubby for grub 2 with UEFI"
 	fi
 
 	if [[ -n ${cfgLilo} ]]
@@ -184,7 +260,7 @@
 		if [[ -n ${runLilo} ]]
 		then
 			[[ -n ${verbose} ]] && echo "running ${lilo}"
-			if [ ! -x $lilo ]
+			if [ ! -x ${lilo} ]
 			then
 				[[ -n ${verbose} ]] && echo "${lilo} does not exist"
 			else
@@ -209,16 +285,31 @@
 	if [[ -n ${cfgGrub} ]]
 	then
 		[[ -n ${verbose} ]] && echo "removing ${version} from ${grubConfig}"
-		${grubby} --remove-kernel=${bootPrefix}/${kernelName}-${version}
+		${grubby} --grub --remove-kernel=${bootPrefix}/${kernelName}-${version}
 	else
-		[[ -n ${verbose} ]] && echo "${grubConfig} does not exist, not running grubby"
+		[[ -n ${verbose} ]] && echo "${grubConfig} does not exist, not running grubby for grub 0.97"
+	fi
+	if [[ -n ${cfgGrub2} ]]
+	then
+		[[ -n ${verbose} ]] && echo "removing ${version} from ${grub2Config}"
+		${grubby} --grub2 -c ${grub2Config} \
+			--remove-kernel=${bootPrefix}/${kernelName}-${version}
+	else
+		[[ -n ${verbose} ]] && echo "${grub2Config} does not exist, not running grubby for grub 2"
+	fi
+	if [[ -n ${cfgGrub2Efi} ]]
+	then
+		[[ -n ${verbose} ]] && echo "removing ${version} from ${grub2EfiConfig}"
+		${grubby} --grub2 -c ${grub2EfiConfig} \
+			--remove-kernel=${bootPrefix}/${kernelName}-${version}
+	else
+		[[ -n ${verbose} ]] && echo "${grub2EfiConfig} does not exist, not running grubby grub 2 with UEFI"
 	fi
 
 	if [[ -n ${cfgLilo} ]]
 	then
 		[[ -n ${verbose} ]] && echo "removing ${version} from ${liloConfig}"
-		${grubby} --remove-kernel=${bootPrefix}/${kernelName}-${version}    \
-			--${liloFlag}
+		${grubby} --remove-kernel=${bootPrefix}/${kernelName}-${version} --${liloFlag}
 
 		if [[ -n ${runLilo} ]]
 		then
@@ -233,24 +324,122 @@
 	else
 		[[ -n ${verbose} ]] && echo "${liloConfig} does not exist, not running grubby"
 	fi
+
+	if [[ -n ${cfguBoot} ]]
+	then
+		[[ -n ${verbose} ]] && echo "removing ${version} from ${ubootDir}..."
+
+		if [ -f ${ubootDir}/${ubootKList} ]
+		then
+			tmpKList=$(mktemp ${ubootDir}/${ubootKList}.XXXX)
+			curversion=$(tail -n1 ${ubootDir}/${ubootKList})
+			sed "/${version}/d" ${ubootDir}/${ubootKList} > ${tmpKList}
+			newversion=$(tail -n1 ${tmpKList})
+			if [ -f ${ubootDir}/uImage-${newversion} ] && [ -f ${ubootDir}/uInitrd-${newversion} ]
+			then
+				if [[ ${curversion} != ${newversion} ]]
+				then
+					cp -fp ${ubootDir}/uImage-${newversion} ${ubootDir}/${ubootDefaultImage}
+					if [ $? -ne 0 ]
+					then
+						[[ -n ${verbose} ]] && echo "copy uImage-${newversion} error, default kernel not replaced!" && exit
+					fi
+					cp -fp ${ubootDir}/uInitrd-${newversion} ${ubootDir}/${ubootDefaultInitrd}
+					if [ $? -ne 0 ]
+					then
+						[[ -n ${verbose} ]] && echo "copy uInitrd-${newversion} error, default Initrd not replaced!" && exit
+					fi
+				fi
+
+				[[ -n ${verbose} ]] && echo "removing uImage-${version}"
+				if [ -f ${ubootDir}/uImage-${version} ]
+				then
+					rm -f ${ubootDir}/uImage-${version}
+				else
+					[[ -n ${verbose} ]] && echo "uImage-${version} did not exist!"
+				fi
+
+				[[ -n ${verbose} ]] && echo "removing uInitrd-${version}"
+				if [ -f ${ubootDir}/uInitrd-${version} ]
+				then
+					rm -f ${ubootDir}/uInitrd-${version}
+				else
+					[[ -n ${verbose} ]] && echo "uInitrd-${version} did not exist!"
+				fi
+
+				mv ${tmpKList} ${ubootDir}/${ubootKList}
+			else
+				[[ -n ${verbose} ]] && echo "uImage ${newversion} does not exist!"
+				[ -f ${tmpKList} ] && rm -f ${tmpKList}
+			fi
+		else
+			[[ -n ${verbose} ]] && echo "No previous kernel version. uBoot images not removed!"
+		fi
+	else
+		[[ -n ${verbose} ]] && echo "${ubootScript} does not exist, not modifying ${ubootDir}"
+	fi
 }
 
 update()
 {
+	if [ ! -f ${bootPrefix}/${kernelName}-${version} ]
+	then
+		[[ -n ${verbose} ]] && echo "kernel for ${version} does not exist, not running grubby"
+		return
+	fi
+
+	INITRD=""
+	if [ -f ${initrdfile} ]
+	then
+		[[ -n ${verbose} ]] && echo "found ${initrdfile} and using it with grubby"
+		INITRD="--initrd ${initrdfile}"
+
+		if [[ -n ${addplymouthinitrd} ]]
+		then
+			INITRD="${INITRD} --extra-initrd ${bootPrefix}/initrd-plymouth.img"
+		fi
+	fi
+
 	if [[ -n ${cfgGrub} ]]
 	then
 		[[ -n ${verbose} ]] && echo "updating ${version} from ${grubConfig}"
 		${grubby} --update-kernel=${bootPrefix}/${kernelName}-${version} \
+			${INITRD} \
 			${kernargs:+--args="${kernargs}"} \
 			${removeargs:+--remove-args="${removeargs}"}
 	else
 		[[ -n ${verbose} ]] && echo "${grubConfig} does not exist, not running grubby"
 	fi
 
+	if [[ -n ${cfgGrub2} ]]
+	then
+		[[ -n ${verbose} ]] && echo "updating ${version} from ${grub2Config}"
+		${grubby} --grub2 -c ${grub2Config} \
+			--update-kernel=${bootPrefix}/${kernelName}-${version} \
+			${INITRD} \
+			${kernargs:+--args="${kernargs}"} \
+			${removeargs:+--remove-args="${removeargs}"}
+	else
+		[[ -n ${verbose} ]] && echo "${grub2Config} does not exist, not running grubby"
+	fi
+
+	if [[ -n ${cfgGrub2Efi} ]]
+	then
+		[[ -n ${verbose} ]] && echo "updating ${version} from ${grub2EfiConfig}"
+		${grubby} --grub2 -c ${grub2EfiConfig} \
+			--update-kernel=${bootPrefix}/${kernelName}-${version} \
+			${INITRD} \
+			${kernargs:+--args="${kernargs}"} \
+			${removeargs:+--remove-args="${removeargs}"}
+	else
+		[[ -n ${verbose} ]] && echo "${grub2EfiConfig} does not exist, not running grubby"
+	fi
+
 	if [[ -n ${cfgLilo} ]]
 	then
 		[[ -n ${verbose} ]] && echo "updating ${version} from ${liloConfig}"
 		${grubby} --update-kernel=${bootPrefix}/${kernelName}-${version} \
+			${INITRD} \
 			${kernargs:+--args="${kernargs}"} \
 			${removeargs:+--remove-args="${removeargs}"} \
 			--${liloFlag}
@@ -268,12 +457,50 @@
 	else
 		[[ -n ${verbose} ]] && echo "${liloConfig} does not exist, not running grubby"
 	fi
+
+	if [[ -n ${cfguBoot} ]]
+	then
+		[[ -n ${verbose} ]] && echo "adding $version to ${ubootDir}..."
+
+		[[ -n ${verbose} ]] && echo "creating uImage-${version}"
+		mkimage -A arm -O linux -T kernel -C none -a 0x80008000 -e 0x80008000 \
+			-n ${version} -d ${bootPrefix}/${kernelName}-${version} ${ubootDir}/uImage-${version}
+
+		[[ -n ${verbose} ]] && echo "creating uInitrd-${version}"
+		mkimage -A arm -O linux -T ramdisk -C none -a 0 -e 0 \
+			-n initramfs -d ${initrdfile} ${ubootDir}/uInitrd-${version}
+
+		if [ -f ${ubootDir}/uImage-${version} ] && [ -f ${ubootDir}/uInitrd-${version} ]
+		then
+			cp -fp ${ubootDir}/uImage-${version} ${ubootDir}/${ubootDefaultImage}
+			if [ $? -ne 0 ]
+			then
+				[[ -n ${verbose} ]] && echo "copy uImage-${version} error, kernel not installed!" && exit
+			fi
+			cp -fp ${ubootDir}/uInitrd-${version} ${ubootDir}/${ubootDefaultInitrd}
+			if [ $? -ne 0 ]
+			then
+				[[ -n ${verbose} ]] && echo "copy uInitrd-${version} error, kernel not installed!" && exit
+			fi
+			echo ${version} >> ${ubootDir}/${ubootKList}
+		else
+			[[ -n ${verbose} ]] && echo "cannot make ${version} the default"
+		fi
+	 else
+		[[ -n ${verbose} ]] && echo "${ubootScript} does not exist, not setting up ${ubootDir}"
+	fi
 }
 
 mkinitrd()
 {
+	if [[ -n ${dracut} ]]
+	then
+		tool="/sbin/dracut ${dracuthostonly} -f ${initrdfile} ${version}"
+	else
+		tool="/sbin/mkinitrd --allow-missing -f ${initrdfile} ${version}"
+	fi
 	[[ -n ${verbose} ]] && echo "creating initrd ${initrdfile} using ${version}"
-	/sbin/mkinitrd --allow-missing -f ${initrdfile} ${version}
+	${tool}
 	rc=$?
 	if [ ${rc} != 0 ]
 	then
@@ -312,6 +539,14 @@
 			initrd="remove"
 			;;
 
+		--dracut)
+			dracut=--dracut
+			;;
+
+		--host-only)
+			dracuthostonly=-H
+			;;
+
 		--initrdfile*)
 			if echo $1 | grep '=' >/dev/null
 			then
@@ -335,7 +570,7 @@
 		--remove-args*)
 			if echo $1 | grep '=' >/dev/null
 			then
-			removeargs=$(echo $1 | sed 's/^--remove-args=//')
+				removeargs=$(echo $1 | sed 's/^--remove-args=//')
 			else
 				removeargs=$2
 				shift
@@ -395,6 +630,14 @@
 			fi
 			;;
 
+		--add-dracut-args)
+			adddracutargs=--add-dracut-args
+			;;
+
+		--add-plymouth-initrd)
+			addplymouthinitrd=--add-plymouth-initrd
+			;;
+
 		-v)
 			verbose=-v
 			;;
@@ -433,7 +676,7 @@
 
 kernelmajor=$(echo ${kernel} | cut -d . -f 1,2)
 
-# kernel image for 2.4 is vmlinux
+# kernel image for 2.4 is kernel
 if [[ ${ARCH} = ppc64 ]] || [[ ${ARCH} = ppc ]]
 then
 	if [[ ${kernelmajor} = 2.4 ]]
@@ -446,6 +689,10 @@
 if [[ -z ${initrdfile} ]]
 then
 	INITRD_NAME_PREFIX="initrd"
+	if [[ -n ${dracut} ]]
+	then
+		INITRD_NAME_PREFIX="initramfs"
+	fi
 
 	if [[ $(uname -m) = ia64 ]]
 	then
@@ -456,6 +703,23 @@
 fi
 [[ -n ${verbose} ]] && echo "initrdfile is ${initrdfile}"
 
+# add dracut i18n, keyboard and plymouth kernel args if requested
+if [[ -n ${dracut} ]] || [[ -n ${adddracutargs} ]]
+then
+	[ -r /etc/conf.d/keymap ] && . /etc/conf.d/keymap
+	[ -r /etc/conf.d/consolefont ] && . /etc/conf.d/consolefont
+
+	if [[ -n ${KEYMAP} ]]
+	then
+		kernargs="${kernargs} KEYTABLE=${KEYMAP}"
+	fi
+
+	if [[ -n ${CONSOLEFONT} ]]
+	then
+		kernargs="${kernargs} SYSFONT=${CONSOLEFONT}"
+	fi
+fi
+
 # set this as the default if we have the package and it matches
 if [[ ${mode} = --install ]] && [[ ${UPDATEDEFAULT} = yes ]] && [[ -n ${package} ]] &&
 	[[ -n ${DEFAULTKERNEL} ]] && [[ ${package} = ${DEFAULTKERNEL} ]]
@@ -487,8 +751,23 @@
 fi
 
 [[ -n ${grubConfig} ]] && [ -f ${grubConfig} ] && cfgGrub=1
+[[ -n ${grub2Config} ]] && [ -f ${grub2Config} ] && cfgGrub2=1
+[[ -n ${grub2EfiConfig} ]] && [ -f ${grub2EfiConfig} ] && cfgGrub2Efi=1
 [[ -n ${liloConfig} ]] && [ -f ${liloConfig} ] && cfgLilo=1
 
+# if we have a uBoot directory, check if it is mounted.
+# if not, mount it. Then check if a boot script exists.
+if [[ -n ${ubootDir} ]]
+then
+	mountEntry=$(mount | grep ${ubootDir})
+	if [[ -z ${mountEntry} ]]
+	then
+		mount ${ubootDevice} ${ubootDir}
+		mounted=1
+	fi
+	[ -f ${ubootScript} ] && cfguBoot=1
+fi
+
 # if we have a lilo config on an x86 box, see if the default boot loader
 # is lilo to determine if it should be run
 if [[ -n ${cfgLilo} ]] && [[ -n ${isx86} ]]