#!/bin/sh
# $Header: /home/cvsd/magellan-cvs/magellan-src/busybox-initscripts/rc/rc,v 1.2 2008-12-22 22:09:27 niro Exp $

source /etc/conf.d/rc
source ${rc_functions}

# load udev helper functions
source ${rc_base}/init.d/udev

# get mage version
MAGEVER="$(< /etc/mageversion)"

# source kernel config if exists
[ -f /etc/conf.d/kernel ] && source /etc/conf.d/kernel

trap "" INT QUIT TSTP

[[ ! -z $1 ]] && runlevel=$1

if [[ -z ${runlevel} ]]
then
	echo "Usage: $0 <runlevel>" >&2
	exit 1
fi


if [[ $runlevel = sysinit ]]
then
	echo
	echo -e "${COLGREEN}Starting ${COLBLUE}MAGELLAN (v${MAGEVER}) ${COLGREEN}Linux${COLDEFAULT}"
	echo -e "Copyright 2001-2009 Niels Rogalla; http://magellan-linux.net"
	echo

	# mount proc filesystem, needed for bootsplash;
	# no use of '/etc/rc.d/init.d/mountproc' anymore
	if [ ! -e /proc/mounts ]
	then
		echo -e ${COLOREDSTAR}"Mounting proc file system ..."
		mount -n /proc
		evaluate_retval
	fi

	# set default verbose level for kernel messages
	[ -z "${RC_VERBOSE_LEVEL}" ] && RC_VERBOSE_LEVEL=3
	echo "${RC_VERBOSE_LEVEL}" > /proc/sys/kernel/printk

	# mount sys file system before udev
	if [ -d /sys ]
	then
		echo -e ${COLOREDSTAR}"Mounting sysfs file system ..."
		mount -n -t sysfs sysfs /sys
		evaluate_retval
	else
		echo -e ${COLORED}"Fatal: mountpoint /sys missing ..."
		echo -e ${COLYELLOW}"Please create the directory /sys (mkdir -p /sys)."
		echo -e ${COLYELLOW}"It's essential for a 2.6 kernel."
	fi

	#### load udev ####
	start_udev
	## end udev ##

	## load devpts ##
	# devfs/udev with 2.6 has no ptys, so devpts is also needed
	# check if we really have devpts support
	if kernel_supports_fs devpts
	then
		# /dev/pts maybe not exists.
		# We only create this directory only if devfs was mounted,
		# or it will fail as / is still mounted readonly
		# udev has this dir already, only a sanity check for devfs
		if [ ! -d "/dev/pts" -a -e "/dev/.devfsd" ] && is_fs_mounted devfs
		then
			mkdir -p /dev/pts &> /dev/null || \
				echo "Could not create /dev/pts !"
		fi

		# now mount devpts
		if [ -d /dev/pts ]
		then
			echo -e ${COLOREDSTAR}"Mounting devpts at /dev/pts ..."
			mount -n -t devpts -o gid=4,mode=0620 devpts /dev/pts
			evaluate_retval
		fi
	else
		# devpts is not supported, give a warning
		echo -e ${COLRED}"No devpts filesystem found ..."
		echo -e ${COLYELLOW}"Your Kernel doesn't support the devpts filesystem."
		echo -e ${COLYELLOW}"Devfs/Udev with a kernel-2.6.x needs devpts,"
		echo -e ${COLYELLOW}"or no pty's are available."
		echo -e ${COLYELLOW}"Please make sure that this is enabled in your kernel."
		echo
		echo -e ${COLYELLOW}"Press any key to continue ..."
		read
	fi
	## end devpts ##


	## load usbfs ##
	if kernel_supports_fs usbfs
	then
		echo -e ${COLOREDSTAR}"Mounting usbfs at /proc/bus/usb ..."
		mount -n -t usbfs usbfs /proc/bus/usb
		evaluate_retval
	fi
	## end usbfs ##

	## services state dir ##
	echo -e ${COLOREDSTAR}"Mounting tmpfs at ${svcdir} ..."
	mount -n -t tmpfs tmpfs "${svcdir}" -o rw,mode=0644,size="${svcsize}"k
	evaluate_retval

	# load bootsplash
	splash "rc_init" "${runlevel}"
fi

if [[ ${runlevel} = shutdown ]] || [[ ${runlevel} = reboot ]]
then
	# load bootsplash
	splash "rc_init" "${runlevel}"

	# if requested save devices to a device tarball before halt
	# only for kernels >=2.6 *and* udev
	# make shure that udev is mounted but *not* devfs --> /dev/.devfsd
	if [[ ${RC_DEVICE_TARBALL} = yes ]] && \
		[ -e /dev/.udev -a ! -e /dev/.devfsd -a ! -e /.bootdev ]
	then
		echo -e ${COLOREDSTAR}"Saving /dev device nodes ..."
		( cd /dev; tar -jclpf "/tmp/devices-$$.tar.bz2" * &> /dev/null )
		mv -f "/tmp/devices-$$.tar.bz2" /lib/udev/state/devices.tar.bz2
		evaluate_retval
	fi

	# run through all runlevel scripts
	for i in $(ls -v ${rc_base}/rc${runlevel}.d/K* 2> /dev/null)
	do
		check_script_status
		suffix=${i#${rc_base}/rc${runlevel}.d/K[0-9][0-9]}

		${i} stop
		error_value=$?

		if [[ ${error_value} != 0 ]]
		then
			print_error_msg
		fi
	done
fi

if [[ ${runlevel} = sysinit ]] || [[ ${runlevel} = boot ]]
then
	for i in $( ls -v ${rc_base}/rc${runlevel}.d/S* 2> /dev/null)
	do
		suffix=${i#${rc_base}/rc${runlevel}.d/S[0-9][0-9]}
		check_script_status

		${i} start
		error_value=$?

		if [[ ${error_value} != 0 ]]
		then
			print_error_msg
		fi
	done
fi