--- trunk/grubby/new-kernel-pkg	2013/10/21 13:35:28	2240
+++ trunk/grubby/new-kernel-pkg	2014/07/16 10:40:51	2686
@@ -116,6 +116,7 @@
 then
 	liloConfig=""
 	bootPrefix=/boot
+	extlinuxConfig=$(readlink -f /etc/extlinux.conf 2>/dev/null)
 	ubootDir=${UBOOT_DIR:-"/boot"}
 	ubootScript=$ubootDir/${UBOOT_SCR:-"boot.scr"}
 	ubootKList=${UBOOT_KLIST:-"klist.txt"}
@@ -144,6 +145,7 @@
 dracut=""
 dracuthostonly=""
 initrdfile=""
+devtreefile=""
 moddep=""
 verbose=""
 makedefault=""
@@ -161,7 +163,7 @@
 	echo "       [--banner=<banner>] [--multiboot=multiboot]" >&2
 	echo "       [--mbargs=mbargs] [--make-default] [--add-dracut-args]" >&2
 	echo "       [--add-plymouth-initrd]" >&2
-	echo "       [--host-only]" >&2
+	echo "       [--host-only] [--devtree=<devicetree.dtb>]" >&2
 	echo "       <--install | --remove | --update> <kernel-version>" >&2
 	echo "       (ex: $(basename $0) --mkinitrd --depmod --install 2.4.7-2)" >&2
 	exit 1
@@ -170,7 +172,7 @@
 install()
 {
 	# XXX kernel should be able to be specified also (or work right on ia64)
-	if [ ! -f ${bootPrefix}/${kernelName}-${version} ]
+	if [ ! -f ${kernelImage} ]
 	then
 		[[ -n ${verbose} ]] && echo "kernel for ${version} does not exist, not running grubby"
 		return
@@ -188,6 +190,13 @@
 		fi
 	fi
 
+	DEVTREE=""
+	if [ -f ${devtreefile} ]
+	then
+		[[ -n ${verbose} ]] && echo "found ${devtreefile} and using it with grubby"
+		DEVTREE="--devtree ${devtreefile}"
+	fi
+
 	# FIXME: is this a good heuristic to find out if we're on iSeries?
 	if [ -d /proc/iSeries ]
 	then
@@ -195,9 +204,9 @@
 		if [[ -z ${initrdfile} ]]
 		then
 			[[ -n ${verbose} ]] && echo "No initrd, just adding system map"
-			/sbin/addSystemMap ${bootPrefix}/System.map-${version} ${bootPrefix}/${kernelName}-${version} ${bootPrefix}/vmlinitrd-${version}
+			/sbin/addSystemMap ${bootPrefix}/System.map-${version} ${kernelImage} ${bootPrefix}/vmlinitrd-${version}
 		else
-			/sbin/addSystemMap ${bootPrefix}/System.map-${version} ${bootPrefix}/${kernelName}-${version} ${bootPrefix}/vmlinux.sm-${version}
+			/sbin/addSystemMap ${bootPrefix}/System.map-${version} ${kernelImage} ${bootPrefix}/vmlinux.sm-${version}
 			/sbin/addRamDisk ${initrdfile} ${bootPrefix}/System.map-${version} ${bootPrefix}/vmlinux.sm-${version} ${bootPrefix}/vmlinitrd-${version} 2>/dev/null
 			rm ${bootPrefix}/vmlinux.sm-${version}
 		fi
@@ -219,8 +228,16 @@
 
 	if [[ -n ${banner} ]]
 	then
-		title="${banner} [ ${version} ]"
-	elif [[ $(read_os_release id) = magellan ]]
+		if [[ ${ARCH} = s390 ]] || [[ ${ARCH} = s390x ]]
+		then
+			title=$(echo ${banner} | sed 's/ /_/g')
+		else
+			title="${banner} [ ${version} ]"
+		fi
+	elif [[ ${ARCH} = s390 ]] || [[ ${ARCH} = s390x ]]
+	then
+		title=$(echo ${version} | sed 's/ /_/g')
+	elif [ -f /etc/os-release ]
 	then
 		title="$(read_os_release name) $(read_os_release version_id) [ ${version} ]"
 	elif [ -f /etc/mageversion ]
@@ -235,7 +252,7 @@
 		[[ -n ${verbose} ]] && echo "adding ${version} to ${grubConfig}"
 
 		${grubby} --grub -c ${grubConfig} \
-			--add-kernel=${bootPrefix}/${kernelName}-${version} \
+			--add-kernel=${kernelImage} \
 			${INITRD} --copy-default ${makedefault} --title "${title}" \
 			${mbkernel:+--add-multiboot="${mbkernel}"} ${mbargs:+--mbargs="${mbargs}"} \
 			--args="root=${rootdevice} ${kernargs}" --remove-kernel="TITLE=${title}"
@@ -247,7 +264,7 @@
 		[[ -n ${verbose} ]] && echo "adding ${version} to ${grub2Config}"
 
 		${grubby} --grub2 -c ${grub2Config} \
-			--add-kernel=${bootPrefix}/${kernelName}-${version} \
+			--add-kernel=${kernelImage} \
 			${INITRD} --copy-default ${makedefault} --title "${title}" \
 			${mbkernel:+--add-multiboot="${mbkernel}"} \
 			${mbargs:+--mbargs="${mbargs}"} \
@@ -260,7 +277,7 @@
 		[[ -n ${verbose} ]] && echo "adding ${version} to ${grub2EfiConfig}"
 
 		${grubby} --grub2 -c ${grub2EfiConfig} --efi \
-			--add-kernel=${bootPrefix}/${kernelName}-${version} \
+			--add-kernel=${kernelImage} ${DEVTREE} \
 			${INITRD} --copy-default ${makedefault} --title "${title}" \
 			${mbkernel:+--add-multiboot="${mbkernel}"} \
 			${mbargs:+--mbargs="${mbargs}"} \
@@ -273,8 +290,8 @@
 	then
 		[[ -n ${verbose} ]] && echo "adding ${version} to ${liloConfig}"
 
-		${grubby} --add-kernel=${bootPrefix}/${kernelName}-${version} ${INITRD} \
-			--copy-default ${makedefault} --title ${version} \
+		${grubby} --add-kernel=${kernelImage} ${INITRD} \
+			--copy-default ${makedefault} --title "${title}" \
 			${mbkernel:+--add-multiboot="${mbkernel}"} ${mbargs:+--mbargs="${mbargs}"} \
 			--args="root=${rootdevice} ${kernargs}" --remove-kernel="TITLE=${version}" \
 			--${liloFlag}
@@ -298,7 +315,7 @@
 		[[ -n ${verbose} ]] && echo "adding ${version} to ${extlinuxConfig}"
 
 		${grubby} --extlinux -c ${extlinuxConfig} \
-			--add-kernel=${bootPrefix}/${kernelName}-${version} \
+			--add-kernel=${kernelImage} \
 			${INITRD} --copy-default ${makedefault} --title "${title}" \
 			${mbkernel:+--add-multiboot="${mbkernel}"} ${mbargs:+--mbargs="${mbargs}"} \
 			--args="root=${rootdevice} ${kernargs}" --remove-kernel="TITLE=${title}"
@@ -313,7 +330,7 @@
 	if [ -d /proc/iSeries ]
 	then
 		[[ -n ${verbose} ]] && echo "On an iSeries, remove img file"
-		rm -f ${bootPrefix}/${kernelName}-${version}.img 2>/dev/null
+		rm -f ${kernelImage}.img 2>/dev/null
 		return
 	fi
 
@@ -321,7 +338,7 @@
 	then
 		[[ -n ${verbose} ]] && echo "removing ${version} from ${grubConfig}"
 		${grubby} --grub -c ${grubConfig} \
-			--remove-kernel=${bootPrefix}/${kernelName}-${version}
+			--remove-kernel=${kernelImage}
 	else
 		[[ -n ${verbose} ]] && echo "${grubConfig} does not exist, not running grubby for grub 0.97"
 	fi
@@ -329,7 +346,7 @@
 	then
 		[[ -n ${verbose} ]] && echo "removing ${version} from ${grub2Config}"
 		${grubby} --grub2 -c ${grub2Config} \
-			--remove-kernel=${bootPrefix}/${kernelName}-${version}
+			--remove-kernel=${kernelImage}
 	else
 		[[ -n ${verbose} ]] && echo "${grub2Config} does not exist, not running grubby for grub 2"
 	fi
@@ -337,7 +354,7 @@
 	then
 		[[ -n ${verbose} ]] && echo "removing ${version} from ${grub2EfiConfig}"
 		${grubby} --grub2 -c ${grub2EfiConfig} --efi \
-			--remove-kernel=${bootPrefix}/${kernelName}-${version}
+			--remove-kernel=${kernelImage}
 	else
 		[[ -n ${verbose} ]] && echo "${grub2EfiConfig} does not exist, not running grubby grub 2 with UEFI"
 	fi
@@ -345,7 +362,7 @@
 	if [[ -n ${cfgLilo} ]]
 	then
 		[[ -n ${verbose} ]] && echo "removing ${version} from ${liloConfig}"
-		${grubby} --remove-kernel=${bootPrefix}/${kernelName}-${version} --${liloFlag}
+		${grubby} --remove-kernel=${kernelImage} --${liloFlag}
 
 		if [[ -n ${runLilo} ]]
 		then
@@ -404,6 +421,7 @@
 				fi
 
 				mv ${tmpKList} ${ubootDir}/${ubootKList}
+				[ -x /sbin/a-b-c ] && /sbin/a-b-c
 			else
 				[[ -n ${verbose} ]] && echo "uImage ${newversion} does not exist!"
 				[ -f ${tmpKList} ] && rm -f ${tmpKList}
@@ -419,7 +437,7 @@
 	then
 		[[ -n ${verbose} ]] && echo "removing ${version} from ${extlinuxConfig}"
 		${grubby} --extlinux -c ${extlinuxConfig} \
-			--remove-kernel=${bootPrefix}/${kernelName}-${version}
+			--remove-kernel=${kernelImage}
 	else
 		[[ -n ${verbose} ]] && echo "${extlinuxConfig} does not exist, not running grubby for extlinux"
 	fi
@@ -427,7 +445,7 @@
 
 update()
 {
-	if [ ! -f ${bootPrefix}/${kernelName}-${version} ]
+	if [ ! -f ${kernelImage} ]
 	then
 		[[ -n ${verbose} ]] && echo "kernel for ${version} does not exist, not running grubby"
 		return
@@ -449,10 +467,11 @@
 	then
 		[[ -n ${verbose} ]] && echo "updating ${version} from ${grubConfig}"
 		${grubby} --grub -c ${grubConfig} \
-			--update-kernel=${bootPrefix}/${kernelName}-${version} \
+			--update-kernel=${kernelImage} \
 			${INITRD} \
 			${kernargs:+--args="${kernargs}"} \
-			${removeargs:+--remove-args="${removeargs}"}
+			${removeargs:+--remove-args="${removeargs}"} \
+			${mbkernel:+--add-multiboot="${mbkernel}"}
 	else
 		[[ -n ${verbose} ]] && echo "${grubConfig} does not exist, not running grubby"
 	fi
@@ -461,7 +480,7 @@
 	then
 		[[ -n ${verbose} ]] && echo "updating ${version} from ${grub2Config}"
 		${grubby} --grub2 -c ${grub2Config} \
-			--update-kernel=${bootPrefix}/${kernelName}-${version} \
+			--update-kernel=${kernelImage} \
 			${INITRD} \
 			${kernargs:+--args="${kernargs}"} \
 			${removeargs:+--remove-args="${removeargs}"}
@@ -473,7 +492,7 @@
 	then
 		[[ -n ${verbose} ]] && echo "updating ${version} from ${grub2EfiConfig}"
 		${grubby} --grub2 -c ${grub2EfiConfig} --efi \
-			--update-kernel=${bootPrefix}/${kernelName}-${version} \
+			--update-kernel=${kernelImage} \
 			${INITRD} \
 			${kernargs:+--args="${kernargs}"} \
 			${removeargs:+--remove-args="${removeargs}"}
@@ -484,7 +503,7 @@
 	if [[ -n ${cfgLilo} ]]
 	then
 		[[ -n ${verbose} ]] && echo "updating ${version} from ${liloConfig}"
-		${grubby} --update-kernel=${bootPrefix}/${kernelName}-${version} \
+		${grubby} --update-kernel=${kernelImage} \
 			${INITRD} \
 			${kernargs:+--args="${kernargs}"} \
 			${removeargs:+--remove-args="${removeargs}"} \
@@ -511,7 +530,7 @@
 		[[ -n ${verbose} ]] && echo "creating uImage-${version}"
 		mkimage -A arm -O linux -T kernel -C none -a ${ubootAddress} \
 			-e ${ubootAddress} -n ${version} \
-			-d ${bootPrefix}/${kernelName}-${version} ${ubootDir}/uImage-${version}
+			-d ${kernelImage} ${ubootDir}/uImage-${version}
 
 		[[ -n ${verbose} ]] && echo "creating uInitrd-${version}"
 		mkimage -A arm -O linux -T ramdisk -C none -a 0 -e 0 \
@@ -530,6 +549,7 @@
 				[[ -n ${verbose} ]] && echo "copy uInitrd-${version} error, kernel not installed!" && exit
 			fi
 			echo ${version} >> ${ubootDir}/${ubootKList}
+			[ -x /sbin/a-b-c ] && /sbin/a-b-c
 		else
 			[[ -n ${verbose} ]] && echo "cannot make ${version} the default"
 		fi
@@ -541,7 +561,7 @@
 	then
 		[[ -n ${verbose} ]] && echo "updating ${version} from ${extlinuxConfig}"
 		${grubby} --extlinux -c ${extlinuxConfig} \
-			--update-kernel=${bootPrefix}/${kernelName}-${version} \
+			--update-kernel=${kernelImage} \
 			${INITRD} \
 			${kernargs:+--args="${kernargs}"} \
 			${removeargs:+--remove-args="${removeargs}"}
@@ -583,7 +603,11 @@
 doRmmoddep()
 {
 	[[ -n ${verbose} ]] && echo "removing modules.dep info for ${version}"
-	[ -d /lib/modules/${version} ] && rm -f /lib/modules/${version}/modules.*
+	if [ -d /lib/modules/${version} ]
+	then
+		rm -f /lib/modules/${version}/modules.*.bin \
+			/lib/modules/${version}/modules.{alias,dep,devname,symbols,softdep}
+	fi
 }
 
 
@@ -598,6 +622,16 @@
 			initrd="remove"
 			;;
 
+		--devtree*)
+			if [[ $1 == --devtree\=* ]]
+			then
+				devtreefile="${1#--devtreefile=}"
+			else
+				devtreefile="$2"
+				shift
+			fi
+			;;
+
 		--dracut)
 			dracut=--dracut
 			;;
@@ -697,6 +731,22 @@
 			addplymouthinitrd=--add-plymouth-initrd
 			;;
 
+		--kernel-image*)
+			if [[ $1 == --kernel-image\=* ]]
+			then
+				kernelImage=${1#--kernel-image=}
+			else
+				kernelImage="$2"
+				shift
+			fi
+			if ! [[ -f ${kernelImage} ]]
+			then
+				echo "Can't find kernel image '${kernelImage}'" >&2
+				usage
+				exit 1
+			fi
+			;;
+
 		-v)
 			verbose=-v
 			;;
@@ -744,6 +794,8 @@
 	fi
 fi
 
+[[ ${kernelImage} ]] || kernelImage="${bootPrefix}/${kernelName}-${version}"
+
 # set the initrd file based on arch; ia64 is the only currently known oddball
 if [[ -z ${initrdfile} ]]
 then