--- trunk/mkinitrd-magellan/grubby/new-kernel-pkg	2011/05/27 17:31:15	1305
+++ trunk/grubby/new-kernel-pkg	2012/02/17 23:10:15	1691
@@ -40,9 +40,11 @@
 fi
 
 [ -f /etc/conf.d/grubby ] && . /etc/conf.d/grubby
+[ -f /etc/conf.d/grubby-uboot ] && . /etc/conf.d/grubby-uboot
 
 cfgGrub=""
 cfgLilo=""
+cfguBoot=""
 runLilo=""
 grubConfig=""
 
@@ -77,6 +79,19 @@
 	lilo=/sbin/zipl
 	runLilo="yes"
 	isx86=""
+elif [[ ${ARCH} = armv7l ]]
+then
+	liloConfig=""
+	bootPrefix=/boot
+	ubootDir=${UBOOT_DIR:-"/boot/uboot"}
+	ubootScript=$ubootDir/${UBOOT_SCR:-"boot.scr"}
+	ubootKList=${UBOOT_KLIST:-"klist.txt"}
+	ubootDevice=/dev/${UBOOT_DEVICE:-"mmcblk0p1"}
+	ubootDefaultImage=${UBOOT_UIMAGE:-"uImage"}
+	ubootDefaultInitrd=${UBOOT_UINITRD:-"uInitrd"}
+	mounted=""
+	liloFlag=""
+	isx86=""
 else
 	# this leaves i?86 and x86_64
 	liloConfig=/etc/lilo.conf
@@ -89,6 +104,8 @@
 mode=""
 version=""
 initrd=""
+dracut=""
+dracuthostonly=""
 initrdfile=""
 moddep=""
 verbose=""
@@ -96,14 +113,18 @@
 package=""
 mbkernel=""
 mbargs=""
+adddracutargs=""
+addplymouthinitrd=""
 
 usage()
 {
-	echo "Usage: $(basename $0) [-v] [--mkinitrd] [--rminitrd]" >&2
+	echo "Usage: $(basename $0) [-v] [--mkinitrd] [--rminitrd] [--dracut]" >&2
 	echo "       [--initrdfile=<initrd-image>] [--depmod] [--rmmoddep]" >&2
 	echo "       [--kernel-args=<args>] [--remove-args=<args>]" >&2
 	echo "       [--banner=<banner>] [--multiboot=multiboot]" >&2
-	echo "       [--mbargs=mbargs] [--make-default]" >&2
+	echo "       [--mbargs=mbargs] [--make-default] [--add-dracut-args]" >&2
+	echo "       [--add-plymouth-initrd]" >&2
+	echo "       [--host-only]" >&2
 	echo "       <--install | --remove | --update> <kernel-version>" >&2
 	echo "       (ex: $(basename $0) --mkinitrd --depmod --install 2.4.7-2)" >&2
 	exit 1
@@ -111,10 +132,10 @@
 
 run_grub2()
 {
-	if [ -d /boot/grub2 -a -x /sbin/grub2-mkconfig ]
+	if [ -d /boot/grub -a -x /sbin/grub-mkconfig ]
 	then
-		cp /boot/grub2/grub.cfg /boot/grub2/grub.cfg.old
-		/sbin/grub2-mkconfig -o /boot/grub2/grub.cfg
+		cp /boot/grub/grub.cfg /boot/grub/grub.cfg.old
+		/sbin/grub-mkconfig -o /boot/grub/grub.cfg
 	fi
 }
 
@@ -132,6 +153,11 @@
 	then
 		[[ -n ${verbose} ]] && echo "found ${initrdfile} and using it with grubby"
 		INITRD="--initrd ${initrdfile}"
+
+		if [[ -n ${addplymouthinitrd} ]]
+		then
+			INITRD="${INITRD} --extra-initrd ${bootPrefix}/initrd-plymouth.img"
+		fi
 	fi
 
 	# FIXME: is this a good heuristic to find out if we're on iSeries?
@@ -247,6 +273,60 @@
 	else
 		[[ -n ${verbose} ]] && echo "${liloConfig} does not exist, not running grubby"
 	fi
+
+	if [[ -n ${cfguBoot} ]]
+	then
+		[[ -n ${verbose} ]] && echo "removing ${version} from ${ubootDir}..."
+
+		if [ -f ${ubootDir}/${ubootKList} ]
+		then
+			tmpKList=$(mktemp ${ubootDir}/${ubootKList}.XXXX)
+			curversion=$(tail -n1 ${ubootDir}/${ubootKList})
+			sed "/${version}/d" ${ubootDir}/${ubootKList} > ${tmpKList}
+			newversion=$(tail -n1 ${tmpKList})
+			if [ -f ${ubootDir}/uImage-${newversion} ] && [ -f ${ubootDir}/uInitrd-${newversion} ]
+			then
+				if [[ ${curversion} != ${newversion} ]]
+				then
+					cp -fp ${ubootDir}/uImage-${newversion} ${ubootDir}/${ubootDefaultImage}
+					if [ $? -ne 0 ]
+					then
+						[[ -n ${verbose} ]] && echo "copy uImage-${newversion} error, default kernel not replaced!" && exit
+					fi
+					cp -fp ${ubootDir}/uInitrd-${newversion} ${ubootDir}/${ubootDefaultInitrd}
+					if [ $? -ne 0 ]
+					then
+						[[ -n ${verbose} ]] && echo "copy uInitrd-${newversion} error, default Initrd not replaced!" && exit
+					fi
+				fi
+
+				[[ -n ${verbose} ]] && echo "removing uImage-${version}"
+				if [ -f ${ubootDir}/uImage-${version} ]
+				then
+					rm -f ${ubootDir}/uImage-${version}
+				else
+					[[ -n ${verbose} ]] && echo "uImage-${version} did not exist!"
+				fi
+
+				[[ -n ${verbose} ]] && echo "removing uInitrd-${version}"
+				if [ -f ${ubootDir}/uInitrd-${version} ]
+				then
+					rm -f ${ubootDir}/uInitrd-${version}
+				else
+					[[ -n ${verbose} ]] && echo "uInitrd-${version} did not exist!"
+				fi
+
+				mv ${tmpKList} ${ubootDir}/${ubootKList}
+			else
+				[[ -n ${verbose} ]] && echo "uImage ${newversion} does not exist!"
+				[ -f ${tmpKList} ] && rm -f ${tmpKList}
+			fi
+		else
+			[[ -n ${verbose} ]] && echo "No previous kernel version. uBoot images not removed!"
+		fi
+	else
+		[[ -n ${verbose} ]] && echo "${ubootScript} does not exist, not modifying ${ubootDir}"
+	fi
 }
 
 update()
@@ -262,6 +342,11 @@
 	then
 		[[ -n ${verbose} ]] && echo "found ${initrdfile} and using it with grubby"
 		INITRD="--initrd ${initrdfile}"
+
+		if [[ -n ${addplymouthinitrd} ]]
+		then
+			INITRD="${INITRD} --extra-initrd ${bootPrefix}/initrd-plymouth.img"
+		fi
 	fi
 
 	# Run grub2's configuration update in parallel, if it is installed
@@ -300,12 +385,50 @@
 	else
 		[[ -n ${verbose} ]] && echo "${liloConfig} does not exist, not running grubby"
 	fi
+
+	if [[ -n ${cfguBoot} ]]
+	then
+		[[ -n ${verbose} ]] && echo "adding $version to ${ubootDir}..."
+
+		[[ -n ${verbose} ]] && echo "creating uImage-${version}"
+		mkimage -A arm -O linux -T kernel -C none -a 0x80008000 -e 0x80008000 \
+			-n ${version} -d ${bootPrefix}/${kernelName}-${version} ${ubootDir}/uImage-${version}
+
+		[[ -n ${verbose} ]] && echo "creating uInitrd-${version}"
+		mkimage -A arm -O linux -T ramdisk -C none -a 0 -e 0 \
+			-n initramfs -d ${initrdfile} ${ubootDir}/uInitrd-${version}
+
+		if [ -f ${ubootDir}/uImage-${version} ] && [ -f ${ubootDir}/uInitrd-${version} ]
+		then
+			cp -fp ${ubootDir}/uImage-${version} ${ubootDir}/${ubootDefaultImage}
+			if [ $? -ne 0 ]
+			then
+				[[ -n ${verbose} ]] && echo "copy uImage-${version} error, kernel not installed!" && exit
+			fi
+			cp -fp ${ubootDir}/uInitrd-${version} ${ubootDir}/${ubootDefaultInitrd}
+			if [ $? -ne 0 ]
+			then
+				[[ -n ${verbose} ]] && echo "copy uInitrd-${version} error, kernel not installed!" && exit
+			fi
+			echo ${version} >> ${ubootDir}/${ubootKList}
+		else
+			[[ -n ${verbose} ]] && echo "cannot make ${version} the default"
+		fi
+	 else
+		[[ -n ${verbose} ]] && echo "${ubootScript} does not exist, not setting up ${ubootDir}"
+	fi
 }
 
 mkinitrd()
 {
+	if [[ -n ${dracut} ]]
+	then
+		tool="/sbin/dracut ${dracuthostonly} -f ${initrdfile} ${version}"
+	else
+		tool="/sbin/mkinitrd --allow-missing -f ${initrdfile} ${version}"
+	fi
 	[[ -n ${verbose} ]] && echo "creating initrd ${initrdfile} using ${version}"
-	/sbin/mkinitrd --allow-missing -f ${initrdfile} ${version}
+	${tool}
 	rc=$?
 	if [ ${rc} != 0 ]
 	then
@@ -344,6 +467,14 @@
 			initrd="remove"
 			;;
 
+		--dracut)
+			dracut=--dracut
+			;;
+
+		--host-only)
+			dracuthostonly=-H
+			;;
+
 		--initrdfile*)
 			if echo $1 | grep '=' >/dev/null
 			then
@@ -427,6 +558,14 @@
 			fi
 			;;
 
+		--add-dracut-args)
+			adddracutargs=--add-dracut-args
+			;;
+
+		--add-plymouth-initrd)
+			addplymouthinitrd=--add-plymouth-initrd
+			;;
+
 		-v)
 			verbose=-v
 			;;
@@ -478,6 +617,10 @@
 if [[ -z ${initrdfile} ]]
 then
 	INITRD_NAME_PREFIX="initrd"
+	if [[ -n ${dracut} ]]
+	then
+		INITRD_NAME_PREFIX="initramfs"
+	fi
 
 	if [[ $(uname -m) = ia64 ]]
 	then
@@ -488,6 +631,23 @@
 fi
 [[ -n ${verbose} ]] && echo "initrdfile is ${initrdfile}"
 
+# add dracut i18n, keyboard and plymouth kernel args if requested
+if [[ -n ${dracut} ]] || [[ -n ${adddracutargs} ]]
+then
+	[ -r /etc/conf.d/keymap ] && . /etc/conf.d/keymap
+	[ -r /etc/conf.d/consolefont ] && . /etc/conf.d/consolefont
+
+	if [[ -n ${KEYMAP} ]]
+	then
+		kernargs="${kernargs} KEYTABLE=${KEYMAP}"
+	fi
+
+	if [[ -n ${CONSOLEFONT} ]]
+	then
+		kernargs="${kernargs} SYSFONT=${CONSOLEFONT}"
+	fi
+fi
+
 # set this as the default if we have the package and it matches
 if [[ ${mode} = --install ]] && [[ ${UPDATEDEFAULT} = yes ]] && [[ -n ${package} ]] &&
 	[[ -n ${DEFAULTKERNEL} ]] && [[ ${package} = ${DEFAULTKERNEL} ]]
@@ -521,6 +681,19 @@
 [[ -n ${grubConfig} ]] && [ -f ${grubConfig} ] && cfgGrub=1
 [[ -n ${liloConfig} ]] && [ -f ${liloConfig} ] && cfgLilo=1
 
+# if we have a uBoot directory, check if it is mounted.
+# if not, mount it. Then check if a boot script exists.
+if [[ -n ${ubootDir} ]]
+then
+	mountEntry=$(mount | grep ${ubootDir})
+	if [[ -z ${mountEntry} ]]
+	then
+		mount ${ubootDevice} ${ubootDir}
+		mounted=1
+	fi
+	[ -f ${ubootScript} ] && cfguBoot=1
+fi
+
 # if we have a lilo config on an x86 box, see if the default boot loader
 # is lilo to determine if it should be run
 if [[ -n ${cfgLilo} ]] && [[ -n ${isx86} ]]