Diff of /trunk/grubby/new-kernel-pkg

Parent Directory | Revision Log | Patch

	trunk/mkinitrd-magellan/grubby/new-kernel-pkg revision 923 by niro, Wed Oct 28 12:02:45 2009 UTC	trunk/grubby/new-kernel-pkg revision 1716 by niro, Sat Feb 18 00:46:32 2012 UTC
#	Line 1	Line 1
1	#!/bin/bash	#!/bin/bash
2		# $Id$
3	#	#
4	# new-kernel-pkg	# new-kernel-pkg
5	# Invoked upon installation or removal of a kernel package, the following	# Invoked upon installation or removal of a kernel package, the following
#	Line 31  lilo=/sbin/lilo	Line 32  lilo=/sbin/lilo
32	# some defaults that are sane for most arches	# some defaults that are sane for most arches
33	kernelName=kernel	kernelName=kernel
34
35	if [ -x ./grubby ]; then	if [ -x ./grubby ]
36	grubby=./grubby	then
37		grubby=./grubby
38	else	else
39	grubby=/sbin/grubby	grubby=/sbin/grubby
40	fi	fi
41
42	[ -f /etc/sysconfig/kernel ] && . /etc/sysconfig/kernel	[ -f /etc/conf.d/grubby ] && . /etc/conf.d/grubby
43		[ -f /etc/conf.d/grubby-uboot ] && . /etc/conf.d/grubby-uboot
44
45		cfgGrub2=""
46		cfgGrub2Efi=""
47	cfgGrub=""	cfgGrub=""
48	cfgLilo=""	cfgLilo=""
49		cfgExtlinux=""
50		cfguBoot=""
51	runLilo=""	runLilo=""
52	grubConfig=""	grubConfig=""
53		grub2Config=""
54		grub2EfiConfig=""
55		extlinuxConfig=""
56
57	ARCH=$(uname -m)	ARCH=$(uname -m)
58
59	if [ $ARCH = 'ia64' ]; then	if [[ ${ARCH} = ia64 ]]
60	liloConfig=/boot/efi/EFI/redhat/elilo.conf	then
61	bootPrefix=/boot/efi/EFI/redhat	liloConfig=/boot/efi/EFI/redhat/elilo.conf
62	liloFlag=elilo	bootPrefix=/boot/efi/EFI/redhat
63	isx86=""	liloFlag=elilo
64	elif [ $ARCH = 'ppc64' -o $ARCH = 'ppc' ]; then	isx86=""
65	liloConfig=/etc/yaboot.conf	elif [[ ${ARCH} = ppc64 ]] || [[ ${ARCH} = ppc ]]
66	bootPrefix=/boot	then
67	lilo=/sbin/ybin	liloConfig=/etc/yaboot.conf
68	liloFlag=yaboot	bootPrefix=/boot
69	runLilo="yes"	lilo=/sbin/ybin
70	isx86=""	liloFlag=yaboot
71	elif [ $ARCH = 'sparc' -o $ARCH = 'sparc64' ]; then	runLilo="yes"
72	liloConfig=/etc/silo.conf	isx86=""
73	bootPrefix=/boot	elif [[ ${ARCH} = sparc ]] || [[ ${ARCH} = sparc64 ]]
74	liloFlag=silo	then
75	lilo=/sbin/silo	liloConfig=/etc/silo.conf
76	isx86=""	bootPrefix=/boot
77	elif [ $ARCH = 's390' -o $ARCH = 's390x' ]; then	liloFlag=silo
78	liloConfig=/etc/zipl.conf	lilo=/sbin/silo
79	bootPrefix=/boot	isx86=""
80	liloFlag=zipl	elif [[ ${ARCH} = s390 ]] || [[ ${ARCH} = s390x ]]
81	lilo=/sbin/zipl	then
82	runLilo="yes"	liloConfig=/etc/zipl.conf
83	isx86=""	bootPrefix=/boot
84		liloFlag=zipl
85		lilo=/sbin/zipl
86		runLilo="yes"
87		isx86=""
88		elif [[ ${ARCH} = armv7l ]]
89		then
90		liloConfig=""
91		bootPrefix=/boot
92		ubootDir=${UBOOT_DIR:-"/boot/uboot"}
93		ubootScript=$ubootDir/${UBOOT_SCR:-"boot.scr"}
94		ubootKList=${UBOOT_KLIST:-"klist.txt"}
95		ubootDevice=/dev/${UBOOT_DEVICE:-"mmcblk0p1"}
96		ubootDefaultImage=${UBOOT_UIMAGE:-"uImage"}
97		ubootDefaultInitrd=${UBOOT_UINITRD:-"uInitrd"}
98		mounted=""
99		liloFlag=""
100		isx86=""
101	else	else
102	# this leaves i?86 and x86_64	# this leaves i?86 and x86_64
103	liloConfig=/etc/lilo.conf	liloConfig=/etc/lilo.conf
104	grubConfig=/boot/grub/grub.conf	grubConfig=/boot/grub/grub.conf
105	bootPrefix=/boot	grub2Config=/boot/grub/grub.cfg
106	liloFlag=lilo	grub2EfiConfig=/boot/grub/grub-efi.cfg
107	isx86="yes"	extlinuxConfig=/boot/extlinux/extlinux.conf
108		bootPrefix=/boot
109		liloFlag=lilo
110		isx86="yes"
111	fi	fi
112
113	mode=""	mode=""
114	version=""	version=""
115	initrd=""	initrd=""
116		dracut=""
117		dracuthostonly=""
118	initrdfile=""	initrdfile=""
119	moddep=""	moddep=""
120	verbose=""	verbose=""
121	makedefault=""	makedefault=""
122	package=""	package=""
123	mbkernel=""	mbkernel="${HYPERVISOR}"
124	mbargs=""	mbargs="${HYPERVISOR_ARGS}"
125		adddracutargs=""
126	usage() {	addplymouthinitrd=""
127	echo "Usage: `basename $0` [-v] [--mkinitrd] [--rminitrd]" >&2
128	echo "       [--initrdfile=<initrd-image>] [--depmod] [--rmmoddep]" >&2	usage()
129	echo "       [--kernel-args=<args>] [--remove-args=<args>]" >&2	{
130	echo "       [--banner=<banner>] [--multiboot=multiboot]" >&2	echo "Usage: $(basename $0) [-v] [--mkinitrd] [--rminitrd] [--dracut]" >&2
131	echo "       [--mbargs=mbargs] [--make-default]" >&2	echo "       [--initrdfile=<initrd-image>] [--depmod] [--rmmoddep]" >&2
132	echo "       <--install | --remove | --update> <kernel-version>" >&2	echo "       [--kernel-args=<args>] [--remove-args=<args>]" >&2
133	echo "       (ex: `basename $0` --mkinitrd --depmod --install 2.4.7-2)" >&2	echo "       [--banner=<banner>] [--multiboot=multiboot]" >&2
134	exit 1	echo "       [--mbargs=mbargs] [--make-default] [--add-dracut-args]" >&2
135		echo "       [--add-plymouth-initrd]" >&2
136		echo "       [--host-only]" >&2
137		echo "       <--install | --remove | --update> <kernel-version>" >&2
138		echo "       (ex: $(basename $0) --mkinitrd --depmod --install 2.4.7-2)" >&2
139		exit 1
140	}	}
141
142	install() {	install()
143	# XXX kernel should be able to be specified also (or work right on ia64)	{
144	if [ ! -f $bootPrefix/$kernelName-$version ] ; then	# XXX kernel should be able to be specified also (or work right on ia64)
145	[ -n "$verbose" ] && echo "kernel for $version does not exist, not running grubby"	if [ ! -f ${bootPrefix}/${kernelName}-${version} ]
146	return	then
147	fi	[[ -n ${verbose} ]] && echo "kernel for ${version} does not exist, not running grubby"
148		return
149	INITRD=""	fi
150	if [ -f $initrdfile ]; then
151	[ -n "$verbose" ] && echo "found $initrdfile and using it with grubby"	INITRD=""
152	INITRD="--initrd $initrdfile"	if [ -f ${initrdfile} ]
153	fi	then
154		[[ -n ${verbose} ]] && echo "found ${initrdfile} and using it with grubby"
155	# FIXME: is this a good heuristic to find out if we're on iSeries?	INITRD="--initrd ${initrdfile}"
156	if [ -d /proc/iSeries ]; then
157	[ -n "$verbose" ] && echo "On an iSeries, just making img file"	if [[ -n ${addplymouthinitrd} ]]
158	if [ -z $initrdfile  ]; then	then
159	[ -n "$verbose" ] && echo "No initrd, just adding system map"	INITRD="${INITRD} --extra-initrd ${bootPrefix}/initrd-plymouth.img"
160	/sbin/addSystemMap $bootPrefix/System.map-$version $bootPrefix/$kernelName-$version $bootPrefix/vmlinitrd-$version	fi
161	else	fi
162	/sbin/addSystemMap $bootPrefix/System.map-$version $bootPrefix/$kernelName-$version $bootPrefix/vmlinux.sm-$version
163	/sbin/addRamDisk $initrdfile $bootPrefix/System.map-$version $bootPrefix/vmlinux.sm-$version $bootPrefix/vmlinitrd-$version 2>/dev/null	# FIXME: is this a good heuristic to find out if we're on iSeries?
164	rm $bootPrefix/vmlinux.sm-$version	if [ -d /proc/iSeries ]
165	fi	then
166	return	[[ -n ${verbose} ]] && echo "On an iSeries, just making img file"
167	fi	if [[ -z ${initrdfile} ]]
168		then
169	# get the root filesystem to use	[[ -n ${verbose} ]] && echo "No initrd, just adding system map"
170	rootdevice=$(awk '{ if ($1 !~ /^[ \t]*#/ && $2 == "/") { print $1; }}' /etc/fstab)	/sbin/addSystemMap ${bootPrefix}/System.map-${version} ${bootPrefix}/${kernelName}-${version} ${bootPrefix}/vmlinitrd-${version}
171		else
172	if [ -n "$mbkernel" -a -n "$cfgLilo" -a "$liloFlag" != "elilo" ]; then	/sbin/addSystemMap ${bootPrefix}/System.map-${version} ${bootPrefix}/${kernelName}-${version} ${bootPrefix}/vmlinux.sm-${version}
173	[ -n "$verbose" ] && echo "multiboot specified, not updating lilo.conf"	/sbin/addRamDisk ${initrdfile} ${bootPrefix}/System.map-${version} ${bootPrefix}/vmlinux.sm-${version} ${bootPrefix}/vmlinitrd-${version} 2>/dev/null
174	cfgLilo=""	rm ${bootPrefix}/vmlinux.sm-${version}
175	fi	fi
176		return
177	if [ -n "$cfgGrub" ]; then	fi
178	[ -n "$verbose" ] && echo "adding $version to $grubConfig"
179		# get the root filesystem to use
180	if [ -n "$banner" ]; then	rootdevice=$(awk '{ if ($1 !~ /^[ \t]*#/ && $2 == "/") { print $1; }}' /etc/fstab)
181	title="$banner ($version)"
182	elif [ -f /etc/mageversion ]; then	if [[ -n ${mbkernel} ]] && [[ -n ${cfgLilo} ]] && [[ ${liloFlag} != elilo ]]
183	title="Magellan Linux $(< /etc/mageversion) ($version)"	then
184	else	[[ -n ${verbose} ]] && echo "multiboot specified, not updating lilo.conf"
185	title="Magellan Linux ($version)"	cfgLilo=""
186	fi	fi
187	$grubby --add-kernel=$bootPrefix/$kernelName-$version \
188	$INITRD --copy-default $makedefault --title "$title" \	if [[ -n ${cfgGrub} ]]
189	${mbkernel:+--add-multiboot="$mbkernel"} ${mbargs:+--mbargs="$mbargs"} \	then
190	--args="root=$rootdevice $kernargs" --remove-kernel="TITLE=$title"	[[ -n ${verbose} ]] && echo "adding ${version} to ${grubConfig}"
191	else
192	[ -n "$verbose" ] && echo "$grubConfig does not exist, not running grubby"	if [[ -n ${banner} ]]
193	fi	then
194		title="${banner} (${version})"
195	if [ -n "$cfgLilo" ]; then	elif [ -f /etc/mageversion ]
196	[ -n "$verbose" ] && echo "adding $version to $liloConfig"	then
197		title="Magellan Linux $(< /etc/mageversion) (${version})"
198	$grubby --add-kernel=$bootPrefix/$kernelName-$version $INITRD \	else
199	--copy-default $makedefault --title $version \	title="Magellan Linux (${version})"
200	${mbkernel:+--add-multiboot="$mbkernel"} ${mbargs:+--mbargs="$mbargs"} \	fi
201	--args="root=$rootdevice $kernargs" --remove-kernel="TITLE=$version" \	${grubby} --grub -c ${grubConfig} \
202	--$liloFlag	--add-kernel=${bootPrefix}/${kernelName}-${version} \
203		${INITRD} --copy-default ${makedefault} --title "${title}" \
204	if [ -n "$runLilo" ]; then	${mbkernel:+--add-multiboot="${mbkernel}"} ${mbargs:+--mbargs="${mbargs}"} \
205	[ -n "$verbose" ] && echo "running $lilo"	--args="root=${rootdevice} ${kernargs}" --remove-kernel="TITLE=${title}"
206	if [ ! -x $lilo ] ; then	else
207	[ -n "$verbose" ] && echo "$lilo does not exist"	[[ -n ${verbose} ]] && echo "${grubConfig} does not exist, not running grubby for grub 0.97"
208	else	fi
209	$lilo > /dev/null	if [[ -n ${cfgGrub2} ]]
210	fi	then
211	fi	[[ -n ${verbose} ]] && echo "adding ${version} to ${grub2Config}"
212	else
213	[ -n "$verbose" ] && echo "$liloConfig does not exist, not running grubby"	if [[ -n ${banner} ]]
214	fi	then
215		title="${banner} (${version})"
216		elif [ -f /etc/mageversion ]
217		then
218		title="Magellan Linux $(< /etc/mageversion) (${version})"
219		else
220		title="Magellan Linux (${version})"
221		fi
222		${grubby} --grub2 -c ${grub2Config} \
223		--add-kernel=${bootPrefix}/${kernelName}-${version} \
224		${INITRD} --copy-default ${makedefault} --title "${title}" \
225		${mbkernel:+--add-multiboot="${mbkernel}"} \
226		${mbargs:+--mbargs="${mbargs}"} \
227		--args="root=${rootdevice} ${kernargs}" --remove-kernel="TITLE=${title}"
228		else
229		[[ -n ${verbose} ]] && echo "${grub2Config} does not exist, not running grubby for grub 2"
230		fi
231		if [[ -n ${cfgGrub2Efi} ]]
232		then
233		[[ -n ${verbose} ]] && echo "adding ${version} to ${grub2EfiConfig}"
234
235		if [[ -n ${banner} ]]
236		then
237		title="${banner} (${version})"
238		elif [ -f /etc/mageversion ]
239		then
240		title="Magellan Linux $(< /etc/mageversion) (${version})"
241		else
242		title="Magellan Linux (${version})"
243		fi
244		${grubby} --grub2 -c ${grub2EfiConfig} \
245		--add-kernel=${bootPrefix}/${kernelName}-${version} \
246		${INITRD} --copy-default ${makedefault} --title "${title}" \
247		${mbkernel:+--add-multiboot="${mbkernel}"} \
248		${mbargs:+--mbargs="${mbargs}"} \
249		--args="root=${rootdevice} ${kernargs}" --remove-kernel="TITLE=${title}"
250		else
251		[[ -n ${verbose} ]] && echo "${grub2EfiConfig} does not exist, not running grubby for grub 2 with UEFI"
252		fi
253
254		if [[ -n ${cfgLilo} ]]
255		then
256		[[ -n ${verbose} ]] && echo "adding ${version} to ${liloConfig}"
257
258		${grubby} --add-kernel=${bootPrefix}/${kernelName}-${version} ${INITRD} \
259		--copy-default ${makedefault} --title ${version} \
260		${mbkernel:+--add-multiboot="${mbkernel}"} ${mbargs:+--mbargs="${mbargs}"} \
261		--args="root=${rootdevice} ${kernargs}" --remove-kernel="TITLE=${version}" \
262		--${liloFlag}
263
264		if [[ -n ${runLilo} ]]
265		then
266		[[ -n ${verbose} ]] && echo "running ${lilo}"
267		if [ ! -x ${lilo} ]
268		then
269		[[ -n ${verbose} ]] && echo "${lilo} does not exist"
270		else
271		${lilo} > /dev/null
272		fi
273		fi
274		else
275		[[ -n ${verbose} ]] && echo "${liloConfig} does not exist, not running grubby"
276		fi
277
278		if [[ -n ${cfgExtlinux} ]]
279		then
280		[[ -n ${verbose} ]] && echo "adding ${version} to ${extlinuxConfig}"
281
282		if [[ -n ${banner} ]]
283		then
284		title="${banner} (${version})"
285		elif [ -f /etc/mageversion ]
286		then
287		title="Magellan Linux $(< /etc/mageversion) (${version})"
288		else
289		title="Magellan Linux (${version})"
290		fi
291		${grubby} --extlinux -c ${extlinuxConfig} \
292		--add-kernel=${bootPrefix}/${kernelName}-${version} \
293		${INITRD} --copy-default ${makedefault} --title "${title}" \
294		${mbkernel:+--add-multiboot="${mbkernel}"} ${mbargs:+--mbargs="${mbargs}"} \
295		--args="root=${rootdevice} ${kernargs}" --remove-kernel="TITLE=${title}"
296		else
297		[[ -n ${verbose} ]] && echo "${extlinuxConfig} does not exist, not running grubby for extlinux"
298		fi
299	}	}
300
301	remove() {	remove()
302	# FIXME: is this a good heuristic to find out if we're on iSeries?	{
303	if [ -d /proc/iSeries ]; then	# FIXME: is this a good heuristic to find out if we're on iSeries?
304	[ -n "$verbose" ] && echo "On an iSeries, remove img file"	if [ -d /proc/iSeries ]
305	rm -f $bootPrefix/$kernelName-$version.img 2>/dev/null	then
306	return	[[ -n ${verbose} ]] && echo "On an iSeries, remove img file"
307	fi	rm -f ${bootPrefix}/${kernelName}-${version}.img 2>/dev/null
308		return
309	if [ -n "$cfgGrub" ]; then	fi
310	[ -n "$verbose" ] && echo "removing $version from $grubConfig"
311	$grubby --remove-kernel=$bootPrefix/$kernelName-$version	if [[ -n ${cfgGrub} ]]
312	else	then
313	[ -n "$verbose" ] && echo "$grubConfig does not exist, not running grubby"	[[ -n ${verbose} ]] && echo "removing ${version} from ${grubConfig}"
314	fi	${grubby} --grub -c ${grubConfig} \
315		--remove-kernel=${bootPrefix}/${kernelName}-${version}
316	if [ -n "$cfgLilo" ]; then	else
317	[ -n "$verbose" ] && echo "removing $version from $liloConfig"	[[ -n ${verbose} ]] && echo "${grubConfig} does not exist, not running grubby for grub 0.97"
318	$grubby --remove-kernel=$bootPrefix/$kernelName-$version    \	fi
319	--$liloFlag	if [[ -n ${cfgGrub2} ]]
320		then
321	if [ -n "$runLilo" ]; then	[[ -n ${verbose} ]] && echo "removing ${version} from ${grub2Config}"
322	[ -n "$verbose" ] && echo "running $lilo"	${grubby} --grub2 -c ${grub2Config} \
323	if [ ! -x $lilo ] ; then	--remove-kernel=${bootPrefix}/${kernelName}-${version}
324	[ -n "$verbose" ] && echo "$lilo does not exist"	else
325	else	[[ -n ${verbose} ]] && echo "${grub2Config} does not exist, not running grubby for grub 2"
326	$lilo > /dev/null	fi
327	fi	if [[ -n ${cfgGrub2Efi} ]]
328	fi	then
329	else	[[ -n ${verbose} ]] && echo "removing ${version} from ${grub2EfiConfig}"
330	[ -n "$verbose" ] && echo "$liloConfig does not exist, not running grubby"	${grubby} --grub2 -c ${grub2EfiConfig} \
331	fi	--remove-kernel=${bootPrefix}/${kernelName}-${version}
332		else
333		[[ -n ${verbose} ]] && echo "${grub2EfiConfig} does not exist, not running grubby grub 2 with UEFI"
334		fi
335
336		if [[ -n ${cfgLilo} ]]
337		then
338		[[ -n ${verbose} ]] && echo "removing ${version} from ${liloConfig}"
339		${grubby} --remove-kernel=${bootPrefix}/${kernelName}-${version} --${liloFlag}
340
341		if [[ -n ${runLilo} ]]
342		then
343		[[ -n ${verbose} ]] && echo "running ${lilo}"
344		if [ ! -x ${lilo} ]
345		then
346		[[ -n ${verbose} ]] && echo "${lilo} does not exist"
347		else
348		${lilo} > /dev/null
349		fi
350		fi
351		else
352		[[ -n ${verbose} ]] && echo "${liloConfig} does not exist, not running grubby"
353		fi
354
355		if [[ -n ${cfguBoot} ]]
356		then
357		[[ -n ${verbose} ]] && echo "removing ${version} from ${ubootDir}..."
358
359		if [ -f ${ubootDir}/${ubootKList} ]
360		then
361		tmpKList=$(mktemp ${ubootDir}/${ubootKList}.XXXX)
362		curversion=$(tail -n1 ${ubootDir}/${ubootKList})
363		sed "/${version}/d" ${ubootDir}/${ubootKList} > ${tmpKList}
364		newversion=$(tail -n1 ${tmpKList})
365		if [ -f ${ubootDir}/uImage-${newversion} ] && [ -f ${ubootDir}/uInitrd-${newversion} ]
366		then
367		if [[ ${curversion} != ${newversion} ]]
368		then
369		cp -fp ${ubootDir}/uImage-${newversion} ${ubootDir}/${ubootDefaultImage}
370		if [ $? -ne 0 ]
371		then
372		[[ -n ${verbose} ]] && echo "copy uImage-${newversion} error, default kernel not replaced!" && exit
373		fi
374		cp -fp ${ubootDir}/uInitrd-${newversion} ${ubootDir}/${ubootDefaultInitrd}
375		if [ $? -ne 0 ]
376		then
377		[[ -n ${verbose} ]] && echo "copy uInitrd-${newversion} error, default Initrd not replaced!" && exit
378		fi
379		fi
380
381		[[ -n ${verbose} ]] && echo "removing uImage-${version}"
382		if [ -f ${ubootDir}/uImage-${version} ]
383		then
384		rm -f ${ubootDir}/uImage-${version}
385		else
386		[[ -n ${verbose} ]] && echo "uImage-${version} did not exist!"
387		fi
388
389		[[ -n ${verbose} ]] && echo "removing uInitrd-${version}"
390		if [ -f ${ubootDir}/uInitrd-${version} ]
391		then
392		rm -f ${ubootDir}/uInitrd-${version}
393		else
394		[[ -n ${verbose} ]] && echo "uInitrd-${version} did not exist!"
395		fi
396
397		mv ${tmpKList} ${ubootDir}/${ubootKList}
398		else
399		[[ -n ${verbose} ]] && echo "uImage ${newversion} does not exist!"
400		[ -f ${tmpKList} ] && rm -f ${tmpKList}
401		fi
402		else
403		[[ -n ${verbose} ]] && echo "No previous kernel version. uBoot images not removed!"
404		fi
405		else
406		[[ -n ${verbose} ]] && echo "${ubootScript} does not exist, not modifying ${ubootDir}"
407		fi
408
409		if [[ -n ${cfgExtlinux} ]]
410		then
411		[[ -n ${verbose} ]] && echo "removing ${version} from ${extlinuxConfig}"
412		${grubby} --extlinux -c ${extlinuxConfig} \
413		--remove-kernel=${bootPrefix}/${kernelName}-${version}
414		else
415		[[ -n ${verbose} ]] && echo "${extlinuxConfig} does not exist, not running grubby for extlinux"
416		fi
417	}	}
418
419	update() {	update()
420	if [ -n "$cfgGrub" ]; then	{
421	[ -n "$verbose" ] && echo "updating $version from $grubConfig"	if [ ! -f ${bootPrefix}/${kernelName}-${version} ]
422	$grubby --update-kernel=$bootPrefix/$kernelName-$version \	then
423	${kernargs:+--args="$kernargs"} \	[[ -n ${verbose} ]] && echo "kernel for ${version} does not exist, not running grubby"
424	${removeargs:+--remove-args="$removeargs"}	return
425	else	fi
426	[ -n "$verbose" ] && echo "$grubConfig does not exist, not running grubby"
427	fi	INITRD=""
428		if [ -f ${initrdfile} ]
429	if [ -n "$cfgLilo" ]; then	then
430	[ -n "$verbose" ] && echo "updating $version from $liloConfig"	[[ -n ${verbose} ]] && echo "found ${initrdfile} and using it with grubby"
431	$grubby --update-kernel=$bootPrefix/$kernelName-$version \	INITRD="--initrd ${initrdfile}"
432	${kernargs:+--args="$kernargs"} \
433	${removeargs:+--remove-args="$removeargs"} \	if [[ -n ${addplymouthinitrd} ]]
434	--$liloFlag	then
435		INITRD="${INITRD} --extra-initrd ${bootPrefix}/initrd-plymouth.img"
436	if [ -n "$runLilo" ]; then	fi
437	[ -n "$verbose" ] && echo "running $lilo"	fi
438	if [ ! -x $lilo ] ; then
439	[ -n "$verbose" ] && echo "$lilo does not exist"	if [[ -n ${cfgGrub} ]]
440	else	then
441	$lilo > /dev/null	[[ -n ${verbose} ]] && echo "updating ${version} from ${grubConfig}"
442	fi	${grubby} --grub -c ${grubConfig} \
443	fi	--update-kernel=${bootPrefix}/${kernelName}-${version} \
444	else	${INITRD} \
445	[ -n "$verbose" ] && echo "$liloConfig does not exist, not running grubby"	${kernargs:+--args="${kernargs}"} \
446	fi	${removeargs:+--remove-args="${removeargs}"}
447		else
448		[[ -n ${verbose} ]] && echo "${grubConfig} does not exist, not running grubby"
449		fi
450
451		if [[ -n ${cfgGrub2} ]]
452		then
453		[[ -n ${verbose} ]] && echo "updating ${version} from ${grub2Config}"
454		${grubby} --grub2 -c ${grub2Config} \
455		--update-kernel=${bootPrefix}/${kernelName}-${version} \
456		${INITRD} \
457		${kernargs:+--args="${kernargs}"} \
458		${removeargs:+--remove-args="${removeargs}"}
459		else
460		[[ -n ${verbose} ]] && echo "${grub2Config} does not exist, not running grubby"
461		fi
462
463		if [[ -n ${cfgGrub2Efi} ]]
464		then
465		[[ -n ${verbose} ]] && echo "updating ${version} from ${grub2EfiConfig}"
466		${grubby} --grub2 -c ${grub2EfiConfig} \
467		--update-kernel=${bootPrefix}/${kernelName}-${version} \
468		${INITRD} \
469		${kernargs:+--args="${kernargs}"} \
470		${removeargs:+--remove-args="${removeargs}"}
471		else
472		[[ -n ${verbose} ]] && echo "${grub2EfiConfig} does not exist, not running grubby"
473		fi
474
475		if [[ -n ${cfgLilo} ]]
476		then
477		[[ -n ${verbose} ]] && echo "updating ${version} from ${liloConfig}"
478		${grubby} --update-kernel=${bootPrefix}/${kernelName}-${version} \
479		${INITRD} \
480		${kernargs:+--args="${kernargs}"} \
481		${removeargs:+--remove-args="${removeargs}"} \
482		--${liloFlag}
483
484		if [[ -n ${runLilo} ]]
485		then
486		[[ -n ${verbose} ]] && echo "running ${lilo}"
487		if [ ! -x ${lilo} ]
488		then
489		[[ -n ${verbose} ]] && echo "${lilo} does not exist"
490		else
491		${lilo} > /dev/null
492		fi
493		fi
494		else
495		[[ -n ${verbose} ]] && echo "${liloConfig} does not exist, not running grubby"
496		fi
497
498		if [[ -n ${cfguBoot} ]]
499		then
500		[[ -n ${verbose} ]] && echo "adding $version to ${ubootDir}..."
501
502		[[ -n ${verbose} ]] && echo "creating uImage-${version}"
503		mkimage -A arm -O linux -T kernel -C none -a 0x80008000 -e 0x80008000 \
504		-n ${version} -d ${bootPrefix}/${kernelName}-${version} ${ubootDir}/uImage-${version}
505
506		[[ -n ${verbose} ]] && echo "creating uInitrd-${version}"
507		mkimage -A arm -O linux -T ramdisk -C none -a 0 -e 0 \
508		-n initramfs -d ${initrdfile} ${ubootDir}/uInitrd-${version}
509
510		if [ -f ${ubootDir}/uImage-${version} ] && [ -f ${ubootDir}/uInitrd-${version} ]
511		then
512		cp -fp ${ubootDir}/uImage-${version} ${ubootDir}/${ubootDefaultImage}
513		if [ $? -ne 0 ]
514		then
515		[[ -n ${verbose} ]] && echo "copy uImage-${version} error, kernel not installed!" && exit
516		fi
517		cp -fp ${ubootDir}/uInitrd-${version} ${ubootDir}/${ubootDefaultInitrd}
518		if [ $? -ne 0 ]
519		then
520		[[ -n ${verbose} ]] && echo "copy uInitrd-${version} error, kernel not installed!" && exit
521		fi
522		echo ${version} >> ${ubootDir}/${ubootKList}
523		else
524		[[ -n ${verbose} ]] && echo "cannot make ${version} the default"
525		fi
526		else
527		[[ -n ${verbose} ]] && echo "${ubootScript} does not exist, not setting up ${ubootDir}"
528		fi
529
530		if [[ -n ${cfgExtlinux} ]]
531		then
532		[[ -n ${verbose} ]] && echo "updating ${version} from ${extlinuxConfig}"
533		${grubby} --extlinux -c ${extlinuxConfig} \
534		--update-kernel=${bootPrefix}/${kernelName}-${version} \
535		${INITRD} \
536		${kernargs:+--args="${kernargs}"} \
537		${removeargs:+--remove-args="${removeargs}"}
538		else
539		[[ -n ${verbose} ]] && echo "${extlinuxConfig} does not exist, not running grubby"
540		fi
541	}	}
542
543	mkinitrd() {	mkinitrd()
544	[ -n "$verbose" ] && echo "creating initrd $initrdfile using $version"	{
545	/sbin/mkinitrd --allow-missing -f $initrdfile $version	if [[ -n ${dracut} ]]
546	rc=$?	then
547	if [ $rc != 0 ]; then	tool="/sbin/dracut ${dracuthostonly} -f ${initrdfile} ${version}"
548	echo "mkinitrd failed" >&2	else
549	exit 1	tool="/sbin/mkinitrd --allow-missing -f ${initrdfile} ${version}"
550	fi	fi
551		[[ -n ${verbose} ]] && echo "creating initrd ${initrdfile} using ${version}"
552		${tool}
553		rc=$?
554		if [ ${rc} != 0 ]
555		then
556		echo "mkinitrd failed" >&2
557		exit 1
558		fi
559	}	}
560
561	rminitrd() {	rminitrd()
562	[ -n "$verbose" ] && echo "removing initrd $initrdfile"	{
563	[ -f $initrdfile ] && rm -f $initrdfile	[[ -n ${verbose} ]] && echo "removing initrd ${initrdfile}"
564		[ -f ${initrdfile} ] && rm -f ${initrdfile}
565	}	}
566
567	doDepmod() {	doDepmod()
568	[ -n "$verbose" ] && echo "running depmod for $version"	{
569	depmod -ae -F /boot/System.map-$version $version	[[ -n ${verbose} ]] && echo "running depmod for ${version}"
570		depmod -ae -F /boot/System.map-${version} ${version}
571	}	}
572
573	doRmmoddep() {	doRmmoddep()
574	[ -n "$verbose" ] && echo "removing modules.dep info for $version"	{
575	[ -d /lib/modules/$version ] && rm -f /lib/modules/$version/modules.*	[[ -n ${verbose} ]] && echo "removing modules.dep info for ${version}"
576		[ -d /lib/modules/${version} ] && rm -f /lib/modules/${version}/modules.*
577	}	}
578
579
580	while [ $# -gt 0 ]; do	while [ $# -gt 0 ]
581	case $1 in	do
582	--mkinitrd)	case $1 in
583	initrd="make"	--mkinitrd)
584	;;	initrd="make"
585		;;
586	--rminitrd)
587	initrd="remove"	--rminitrd)
588	;;	initrd="remove"
589		;;
590	--initrdfile*)
591	if echo $1 | grep '=' >/dev/null ; then	--dracut)
592	initrdfile=`echo $1 | sed 's/^--initrdfile=//'`	dracut=--dracut
593	else	;;
594	initrdfile=$2
595	shift	--host-only)
596	fi	dracuthostonly=-H
597	;;	;;
598
599	--kernel-args*)	--initrdfile*)
600	if echo $1 | grep '=' >/dev/null ; then	if echo $1 | grep '=' >/dev/null
601	kernargs=`echo $1 | sed 's/^--kernel-args=//'`	then
602	else	initrdfile=$(echo $1 | sed 's/^--initrdfile=//')
603	kernargs=$2	else
604	shift	initrdfile=$2
605	fi	shift
606	;;	fi
607		;;
608	--remove-args*)
609	if echo $1 | grep '=' >/dev/null ; then	--kernel-args*)
610	removeargs=`echo $1 | sed 's/^--remove-args=//'`	if echo $1 | grep '=' >/dev/null
611	else	then
612	removeargs=$2	kernargs=$(echo $1 | sed 's/^--kernel-args=//')
613	shift	else
614	fi	kernargs=$2
615	;;	shift
616		fi
617	--banner*)	;;
618	if echo $1 | grep '=' >/dev/null ; then
619	banner=`echo $1 | sed 's/^--banner=//'`	--remove-args*)
620	else	if echo $1 | grep '=' >/dev/null
621	banner=$2	then
622	shift	removeargs=$(echo $1 | sed 's/^--remove-args=//')
623	fi	else
624	;;	removeargs=$2
625		shift
626	--multiboot*)	fi
627	if echo $1 |grep '=' >/dev/null; then	;;
628	mbkernel=`echo $1 | sed 's/^--multiboot=//'`
629	else	--banner*)
630	# can't really support having an optional second arg here	if echo $1 | grep '=' >/dev/null
631	# sorry!	then
632	mbkernel="/boot/xen.gz"	banner=$(echo $1 | sed 's/^--banner=//')
633	fi	else
634	;;	banner=$2
635		shift
636	--mbargs*)	fi
637	if echo $1 |grep '=' >/dev/null; then	;;
638	mbargs=`echo $1 | sed 's/^--mbargs=//'`
639	else	--multiboot*)
640	mbargs="$2"	if echo $1 |grep '=' >/dev/null
641	shift	then
642	fi	mbkernel=$(echo $1 | sed 's/^--multiboot=//')
643	;;	else
644		# can't really support having an optional second arg here
645	--depmod)	# sorry!
646	moddep="make"	mbkernel="/boot/xen.gz"
647	;;	fi
648		;;
649	--rmmoddep)
650	moddep="remove"	--mbargs*)
651	;;	if echo $1 |grep '=' >/dev/null
652		then
653	--make-default)	mbargs=$(echo $1 | sed 's/^--mbargs=//')
654	makedefault="--make-default"	else
655	;;	mbargs="$2"
656		shift
657	--package)	fi
658	if echo $1 | grep '=' >/dev/null ; then	;;
659	package=`echo $1 | sed 's/^--package=//'`
660	else	--depmod)
661	package=$2	moddep="make"
662	shift	;;
663	fi
664	;;	--rmmoddep)
665		moddep="remove"
666	-v)	;;
667	verbose=-v
668	;;	--make-default)
669		makedefault="--make-default"
670	*)	;;
671	if [ -z "$mode" ]; then
672	mode=$1	--package)
673	elif [ -z "$version" ]; then	if echo $1 | grep '=' >/dev/null
674	version=$1	then
675	else	package=$(echo $1 | sed 's/^--package=//')
676	usage	else
677	fi	package=$2
678	;;	shift
679	esac	fi
680		;;
681
682		--add-dracut-args)
683		adddracutargs=--add-dracut-args
684		;;
685
686		--add-plymouth-initrd)
687		addplymouthinitrd=--add-plymouth-initrd
688		;;
689
690		-v)
691		verbose=-v
692		;;
693
694		*)
695		if [[ -z ${mode} ]]
696		then
697		mode=$1
698		elif [[ -z ${version} ]]
699		then
700		version=$1
701		else
702		usage
703		fi
704		;;
705		esac
706
707	shift	shift
708	done	done
709
710	# make sure the mode is valid	# make sure the mode is valid
711	if [ "$mode" != "--install" -a "$mode" != "--remove" -a "$mode" != "--update" ] ; then	if [[ ${mode} != --install ]] && [[ ${mode} != --remove ]] && [[ ${mode} != --update ]]
712	usage	then
713		usage
714	fi	fi
715
716	if [ -z "$version" ]; then	if [[ -z ${version} ]]
717	usage	then
718		usage
719	fi	fi
720
721	if [ "$mode" != "--install" -a "$makedefault" ]; then	if [ "${mode}" != "--install" -a "${makedefault}" ]
722	usage	then
723		usage
724	fi	fi
725
726	kernelmajor=`echo $kernel | cut -d . -f 1,2`	kernelmajor=$(echo ${kernel} | cut -d . -f 1,2)
727
728	# kernel image for 2.4 is vmlinux	# kernel image for 2.4 is kernel
729	if [ $ARCH = 'ppc64' -o $ARCH = 'ppc' ]; then	if [[ ${ARCH} = ppc64 ]] || [[ ${ARCH} = ppc ]]
730	if [ "$kernelmajor" == "2.4" ]; then	then
731	kernelName=kernel	if [[ ${kernelmajor} = 2.4 ]]
732	fi	then
733		kernelName=kernel
734		fi
735	fi	fi
736
737	# set the initrd file based on arch; ia64 is the only currently known oddball	# set the initrd file based on arch; ia64 is the only currently known oddball
738	if [ -z "$initrdfile" ]; then	if [[ -z ${initrdfile} ]]
739	INITRD_NAME_PREFIX="initrd"	then
740		INITRD_NAME_PREFIX="initrd"
741	if [ `uname -m` = "ia64" ]; then	if [[ -n ${dracut} ]]
742	initrdfile="/boot/efi/EFI/redhat/$INITRD_NAME_PREFIX-$version.img"	then
743	else	INITRD_NAME_PREFIX="initramfs"
744	initrdfile="/boot/$INITRD_NAME_PREFIX-$version.img"	fi
	fi
	fi
	[ -n "$verbose" ] && echo "initrdfile is $initrdfile"
745
746	# set this as the default if we have the package and it matches	if [[ $(uname -m) = ia64 ]]
747	if [ "$mode" == "--install" -a "$UPDATEDEFAULT" == "yes" -a -n "$package" -a -n "$DEFAULTKERNEL" -a "$package" == "$DEFAULTKERNEL" ]; then	then
748	makedefault="--make-default"	initrdfile="/boot/efi/EFI/redhat/${INITRD_NAME_PREFIX}-${version}.img"
749	[ -n "$verbose" ] && echo "making it the default based on config"	else
750		initrdfile="/boot/${INITRD_NAME_PREFIX}-${version}.img"
751		fi
752	fi	fi
753		[[ -n ${verbose} ]] && echo "initrdfile is ${initrdfile}"
754
755	if [ "$moddep" == "make" ]; then	# add dracut i18n, keyboard and plymouth kernel args if requested
756	doDepmod	if [[ -n ${dracut} ]] || [[ -n ${adddracutargs} ]]
757	elif [ "$moddep" == "remove" ]; then	then
758	doRmmoddep	[ -r /etc/conf.d/keymap ] && . /etc/conf.d/keymap
759	fi	[ -r /etc/conf.d/consolefont ] && . /etc/conf.d/consolefont
760
761		if [[ -n ${KEYMAP} ]]
762		then
763		kernargs="${kernargs} KEYTABLE=${KEYMAP}"
764		fi
765
766	if [ "$initrd" == "make" ]; then	if [[ -n ${CONSOLEFONT} ]]
767	mkinitrd	then
768	elif [ "$initrd" == "remove" ]; then	kernargs="${kernargs} SYSFONT=${CONSOLEFONT}"
769	rminitrd	fi
770	fi	fi
771
772	if [ ! -x $grubby ] ; then	# set this as the default if we have the package and it matches
773	[ -n "$verbose" ] && echo "$grubby does not exist"	if [[ ${mode} = --install ]] && [[ ${UPDATEDEFAULT} = yes ]] && [[ -n ${package} ]] &&
774	exit 0	[[ -n ${DEFAULTKERNEL} ]] && [[ ${package} = ${DEFAULTKERNEL} ]]
775		then
776		makedefault="--make-default"
777		[[ -n ${verbose} ]] && echo "making it the default based on config"
778		fi
779
780		if [[ ${moddep} = make ]]
781		then
782		doDepmod
783		elif [[ ${moddep} = remove ]]
784		then
785		doRmmoddep
786		fi
787
788		if [[ ${initrd} = make ]]
789		then
790		mkinitrd
791		elif [[ ${initrd} = remove ]]
792		then
793		rminitrd
794		fi
795
796		if [ ! -x ${grubby} ]
797		then
798		[[ -n ${verbose} ]] && echo "${grubby} does not exist"
799		exit 0
800		fi
801
802		[[ -n ${grubConfig} ]] && [ -f ${grubConfig} ] && cfgGrub=1
803		[[ -n ${grub2Config} ]] && [ -f ${grub2Config} ] && cfgGrub2=1
804		[[ -n ${grub2EfiConfig} ]] && [ -f ${grub2EfiConfig} ] && cfgGrub2Efi=1
805		[[ -n ${liloConfig} ]] && [ -f ${liloConfig} ] && cfgLilo=1
806		[[ -n ${extlinuxConfig} ]] && [ -f ${extlinuxConfig} ] && cfgExtlinux=1
807
808		# if we have a uBoot directory, check if it is mounted.
809		# if not, mount it. Then check if a boot script exists.
810		if [[ -n ${ubootDir} ]]
811		then
812		mountEntry=$(mount | grep ${ubootDir})
813		if [[ -z ${mountEntry} ]]
814		then
815		mount ${ubootDevice} ${ubootDir}
816		mounted=1
817		fi
818		[ -f ${ubootScript} ] && cfguBoot=1
819	fi	fi
820
	[ -n "$grubConfig" ] && [ -f "$grubConfig" ] && cfgGrub=1;
	[ -n "$liloConfig" ] && [ -f "$liloConfig" ] && cfgLilo=1;
821	# if we have a lilo config on an x86 box, see if the default boot loader	# if we have a lilo config on an x86 box, see if the default boot loader
822	# is lilo to determine if it should be run	# is lilo to determine if it should be run
823	if [ -n "$cfgLilo" -a -n "$isx86" ]; then	if [[ -n ${cfgLilo} ]] && [[ -n ${isx86} ]]
824	runLilo=$($grubby --bootloader-probe | grep lilo)	then
825		runLilo=$(${grubby} --bootloader-probe | grep lilo)
826	fi	fi
827
828	if [ "$mode" == "--install" ]; then	if [[ ${mode} = --install ]]
829	install	then
830	elif [ "$mode" == "--remove" ]; then	install
831	remove	elif [[ ${mode} = --remove ]]
832	elif [ "$mode" == "--update" ]; then	then
833	update	remove
834		elif [[ ${mode} = --update ]]
835		then
836		update
837	fi	fi
838
839	exit 0	exit 0

---

Colored Diff Long Colored Diff Full Colored Diff Unidiff Context Diff Side by Side

Legend: Removed from v.923   changed lines   Added in v.1716