Add support for SUSE grub2 configuration files

Only set RPM_OPT_FLAGS if undefined.

Bump version to 8.28

update extlinux.conf on arm arches if it exists

Handle numeric indices in grub2's saved environment.

Attempt to compensate for shell quoting in grub names.

Fix bad grubenv file.

If we're using default=saved_entry, and there's nothing saved, it's #0.

Only run the grub2 test suite on architectures where it's meaningful.

Bump version to 8.27

Make grub2's "set default=${saved_entry}" work better (#808021)

Add a TODO for a path to modernizing much of grubby's codebase.

Don't continue executing after printing the default index.

Bump version to 8.26

Conditionally call arm-boot-config's boot.scr generator if available (#952428)

Bump version to 8.25

Error instead of segfaulting if we can't find any working config (#912873)

Bump version to 8.24

Clean up Harald's untested code. (#923441)

Bump version to 8.23

new-kernel-pkg: do not remove modules.* files not generated by depmod

new-kernel-pkg: factor out $kernelImage

new-kernel-pkg: simplify argument parsing

new-kernel-pkg: factor out $title generation

Suppress error message in case of an empty /etc/fstab

Fix empty root device in case of an empty /etc/fstab

Add logging when things fail.

Bump version to 8.22

Revert "Add test case for rhbz#742885"

Updated ChangeLog

Bump version to 8.21

Use systemd vconsole.conf and locale.conf if present (#881908)

Spelling fixes.

Add test case for rhbz#742885

Deal with case-insensitive extlinux config file

-updated ChangeLog

Bump version to 8.20

Fix removals and initrd additions for LT_KERNEL_EFI type entries.

[new-kernel-pkg] pass --efi for removal and adding initramfs images.

-updated ChangeLog

Bump version to 8.19

Don't accidentally migrate from linuxefi back to linux (#859285)

Bump version to 8.18

Change the way the kernel load address is determined for ARM U-Boot.

Bump version to 8.17

Fix broken alloca()/free() pair.

Bump version to 8.16

Handle linuxefi and initrdefi lines correctly in grub2.

-updated ChangeLog

-make sbindir variable and prepare grubby for usr-move

Fix minor memory leak introduced by previous fix.

Update to 8.15

Revert "Avoid string duplication calling dirname()"

Bump version to 8.14

Fix uninitialized variable error.

Since we've had a lot of changes, bump version to 8.13

grubby.8: fixes for the grubby man page

Fix for grub on SuSE systems: test lba and boot info

Add tests for --set-default-index feature

Add --set-default-index feature

1 isn't a great value for MALLOC_PERTURB_ - use 5265.

test.sh: enable the use of MALLOC_PERTURB_

test.sh: revert bash 4 only syntax change

Fix minor style issue.

ia64/elilo: add support for probing the currently installed bootloader

ppc64/yaboot: add support for probing the currently installed bootloader

Fix grub detection on SuSE systems: config file order

Invert "isSuseSystem()" test so the suse code is nearer the test.

Fix for grub on SuSE systems: lba and boot information

Support systems that do not have /boot as a separate filesystem

Update the code to set the ubootAddress.

Update the ubootDir default.

Convert to c99 loop initializations.

Avoid string duplication calling dirname()

Add "const" specifier to function arguments

Support UBOOT_IMGADDR override

Update version to 8.12

Pick the last / device (#826537)

Preserve "trailing indentation" when splitting line elements (#742720)

Update version to 8.11

Fix failures with grub 2.00~beta2 and 8.10, and add a test case.

Fix failures with grub 2.00~beta2 and 8.10, and add a test case.

updated ChangeLog

version 8.10

Explicitly check for Grub2 on ppc

Try to find grub2 config first

Make --remove-kenrel support titles in grub2 (and other fixes)

Use "isquote" where appropriate.

-support /etc/os-release

-udpated ChangeLog

-version 8.9

Add support to new-kernel-pkg to recognize ARCH == armv5tel needed for 
Kirkwood based systems.

-let the menuentries match our grub-cosmetic patch

-fix a infinite loop caused by dropping the path prefix of mkinitrd

updated ChangeLog

-version 8.8_20120218

new-kernel-pkg fails to find U-Boot.

new-kernel-pkg fails to find U-Boot if the boot directory is not on a
separate partition.

This only affects the U-Boot image creation section of the 
new-kernel-pkg
script, for ARM based systems.  My initial changes were only tested on
specific ARM-OMAP systems that required a specific U-Boot partition.  
Testing
on additional systems (ARM-Tegra) revealed this incorrect assumption.

The attached patch includes the following:

- Cosmetic: Correction - change uBoot to U-Boot in comments.
- Additions:
-- Recognize ARCH == armv7hl
-- Make U-Boot load/execute address variable (based on machine)
-- Bug: Correct invalid assumption that the U-Boot directory would 
always
   be on a separate partition.

Try to display title when printing information with '--info'

Signed-off-by: Cleber Rosa <crosa@redhat.com>

Fix endswith() to correctly test its input for validity.

Fix hard coded paths so kernel's "make install" will DTRT.

Implement support for "default saved" for grub2

Signed-off-by: Cleber Rosa <crosa@redhat.com>

Include prefix when printing kernel information

When running grubby with '--info=', the initrd is displayed with the
boot prefix, so, for correctness, also include it in the kernel line.

Signed-off-by: Cleber Rosa <crosa@redhat.com>

Refactor grub2 title extraction, making it a function

'--default-title' now uses that functions, but others such as '--info'
could, IMHO, also display the title and thus, use the refactored
function.

Signed-off-by: Cleber Rosa <crosa@redhat.com>

Include a / when one is missing in paths (#769641)

updated ChangeLog

-version 8.8

Fix new test case to not care if /boot is a mountpoint...

updated ChangeLog

-version 8.7

Add a test case for --debug.

Make sure --debug works as expected in both successful and failed
attempts.

grubby: Add --debug option to annotate "suitable template" failures

Today, when grubby fails with "no suitable template found" the user
has no idea why that might be.  These can fail for several reasons.
So add a --debug option to print out the line in grubby.c where it
failed, a text message describing the failure, and a copy of the
bootloader entry that failed, to aid investigation.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>

updated ChangeLog

-version 8.6

Fix another test broken by 4bb88f93e6c7cf432e354a164fce8743794a

updated ChangeLog

-version 8.5

Don't hardcode dracut path. (#768645)

dracut moved from /sbin to /usr/bin, so fix that, but also it's
pointless to hardcode what's in PATH.

Use dummy entries for text following kernel entries so it is preserved 
(#744717)

Signed-off-by: Adam Williamson <awilliam@redhat.com>

Fix up one test result for changes from 
4bb88f93e6c7cf432e354a164fce8743794a84a5

updated ChangeLog

-version 8.4

Update "echo 'Loading..." messages to the new kernel version

grub2-mkconfig will create lines like:
		echo    'Loading Linux 3.1.0-0.rc6.git0.0.fc16.x86_64 
...'
- depending on the content of /etc/default/grub.

grubby would recognize these lines and replace them with lines with the 
right
version number such as:
	echo 'Loading Fedora (3.1.0-0.rc6.git0.0.fc16.x86_64)'

these lines were however not recognized by grubby and would not be 
updated on
next kernel update when this entry would be used as template.

With this patch grubby will no longer look for a specific title but 
patch any
"echo 'Loading" line immediately before the kernel line.

Signed-off-by: Adam Williamson <awilliam@redhat.com>

Add new '--default-title' feature.

This displays the title of the default entry directly from the
parsed configuration file.

Signed-off-by: Cleber Rosa <crosa@redhat.com>

Add new '--default-index' feature.

This displays the (numeric) index of the default entry directly
from the parsed configuration file.

Signed-off-by: Cleber Rosa <crosa@redhat.com>

test.sh: add feature for testing the output of a grubby command

Instead of comparing the configuration file that gets generated by
a grubby command

Signed-off-by: Cleber Rosa <crosa@redhat.com>

GRUB: Fix detection by increasing offset when comparing stage1 to MBR

A couple of instructions of grub's stage1 get modified when copied to 
the
MBR (replaced by NOOPs). Check for this condition, and skip these bytes
while compare stage1 and MBR.

Signed-off-by: Cleber Rosa <crosa@redhat.com>

    Don't crash if grubConfig not found.
    
    I trigger this crash on my system. It has syslinux and no grub.
    
    Signed-off-by: Christopher Li <kernel@chrisli.org>

Adding extlinux support for new-kernel-pkg

Signed-off-by: Christopher Li <kernel@chrisli.org>

    Look for other possible grub config files
    
    Since debian and Ubuntu don't symlink /boot/grub/menu.lst
    to /etc/grub.conf, make it possible to look them over on
    this original location as well.
    
    Signed-off-by: Lucas Meneghel Rodrigues <lmr@redhat.com>

    Make grubby to recognize Ubuntu's spin of Grub2
    
    We are looking to use grubby as a bootloader entries
    manager for the autotest project:
    
    http://autotest.kernel.org/
    
    The project aims to cover more distros than just
    red hat based ones, so this small patch fixes the
    tool under Ubuntu. They have chosen to name grub2
    grub, in all directory references. Also, they don't
    make symlinks of grub config files on /etc. So,
    adapt the code to take into consideration this
    behavior.
    
    Changes from v1:
      * Removed nested set of {}
      * Made the return in case /etc/grub.d is found
        indented
      * Moved the dbgPrint("not found\n") statement
        before the last return. Also, put a new
        dbgPrint("found\n") if we've found a suitable
        grub2 config file ubuntu/debian style.
    
    Signed-off-by: Lucas Meneghel Rodrigues <lmr@redhat.com>

updated ChangeLog

-version 8.3

    Fix new-kernel-pkg invocation of grubby for grub (bz 725185)
    
    new-kernel-pkg did not specify --grub when it called grubby to 
update the
    kernel entry with an initrd. Grubby would then try to probe what to 
do and
    would give preference to grub2 and thus leave an incomplete grub 
entry.
    
    new-kernel-pkg did also not specify the grub config file explicitly 
to
    grubby as it do for the grub2 config file. That could perhaps in 
some
    situations cause grubby to do something else than new-kernel-pkg 
expected.
    
    Now --grub -c $grubConfig is specified explicitly in all cases.

updated ChangeLog

-version 8.2

Read HYPERVISOR and HYPERVISOR_ARGS from /etc/conf.d/grubby and 
set 
mbkernel and mbargs Signed-off-by: W. Michael Petullo <mike@flyn.org>

updated ChangeLog

-version 8.1

Fix a miss-spelled variable name.

"grub2Config", not "grub2Cfg".

updated ChangeLog

-version 8.0

Add some limited test cases for grub2.

Update grub2 support to new-kernel-pkg

This uses grubby for grub2 on efi and non-efi machines.

Add grub2.cfg support to grubby.

Add -ggdb

Tweak some make options.

Some functions are only used in dbgPrintf() arguments. As such,
errors/warnings on unused functions need to be disabled.

Also, use -std=gnu99.

Also, add a debug target.

Rename entrySeparator to entryStart.
    
Since we're actually using it to detect the start of an entry (and
specifically not the end), name this slightly better.

Convert configFileInfo structs to C99-style initializers.

Get rid of the old initializers where struct names were commends, in
favor of C99-style assignment, so new fields can be put at logical
places without having to change the whole file.

Add uboot support for ARM (#712199)

-added ChangeLog

-version 7.0.18 - upstream fixed grub2 errors in new-kernel-pkg, which we already done in our port of 7.0.17. ver up to be in sync with upstream

-we install grub2 without '2' suffix

-version 7.0.17.1

-be dracut friendly

-added installkernel{,.8}

-copied from magellan-mkinitrd

-version 7.0.17

-adjusted Makefile to use grubby's version file

-be more dracut and plymouth friendly

-added make-tarball script

-forkin standalone grubby

-fixed missing man-pages

-added missing man page

-added check for return value of getuuidbydev() - resolves a segfault if the device does not exist - see rhbz#592294

-merged with upstream:
-update initrd support
-better rootdev handling
-better support for uuids

-install grubby man-page

-fixed a typo

-fixed missing mandir variable

-read grub options from /etc/conf.d/grub

-read config from /etc/conf.d/grubby

-updated style

-pulled in new version from fedora (7.0.8) with update support
-removed dracut and fedara specific stuff
-fixed to work with magellan

-fixed grub.conf default location

-we not providing installkernel here

-updated grubby to version 7.0.8 from fedory with blkid support

-converted cvsignore to svn:ignore propset

-fixed CFLAGS

-import if magellan mkinitrd; it is a fork of redhats mkinitrd-5.0.8 with all magellan patches and features; deprecates magellan-src/mkinitrd