--- trunk/magellan-initscripts/etc/rc.d/init.d/rc	2007/08/17 22:07:29	514
+++ trunk/initscripts/sysvinit/rc/rc	2011/06/04 21:05:01	1356
@@ -1,8 +1,8 @@
 #!/bin/bash
-# $Header: /home/cvsd/magellan-cvs/magellan-src/magellan-initscripts/etc/rc.d/init.d/rc,v 1.15 2007-08-17 22:07:29 niro Exp $
+# $Id$
 
-source /etc/sysconfig/rc
-source $rc_functions
+source /etc/conf.d/rc
+source ${rc_functions}
 
 # get mage version
 MAGEVER="$(< /etc/mageversion)"
@@ -10,83 +10,15 @@
 # source kernel config if exists
 [ -f /etc/conf.d/kernel ] && source /etc/conf.d/kernel
 
-udev_version()
-{
-	local version=0
-
-	if [[ -x /sbin/udev ]]
-	then
-		version=$(/sbin/udev -V)
-		# We need it without a leading '0', else bash do the wrong thing
-		version=${version##0}
-		# Older udev's will print nothing
-		[[ -z ${version} ]] && version=0
-	elif [[ -x /sbin/udevd ]]
-	then
-		version=$(/sbin/udevd --version)
-		version=${version##0}
-		[[ -z ${version} ]] && version=0
-	fi
-
-	echo "${version}"
-}
-
-populate_udev()
-{
-	local opts
-
-	# tell modprobe.sh to be verbose to $CONSOLE
-	echo CONSOLE=${CONSOLE} > /dev/.udev_populate
-
-	# populate /dev with devices already found by the kernel
-	if [ "$(kernel_version | sed 's:\.::g' | cut -d_ -f1)" -gt "2614" ]
-	then
-		echo -e ${COLOREDSTAR}"  Populating /dev with existing devices through uevents ..."
-		[[ $(udev_version) -ge "96" ]] && [[ ${RC_COLDPLUG} != yes ]] && opts="--attr-match=dev"
-		/sbin/udevtrigger ${opts}
-		evaluate_retval
-	else
-		echo -e ${COLOREDSTAR}"  Populating /dev with existing devices with udevstart ..."
-		/sbin/udevstart
-		evaluate_retval
-	fi
-
-	# loop until everything is finished
-	echo -e ${COLOREDSTAR}"  Letting udev process events ..."
-	/sbin/udevsettle --timeout=60
-	evaluate_retval
-
-	rm -f /dev/.udev_populate
-	return 0
-}
-
-seed_dev()
-{
-	# seed /dev with some things that we know we need
-	echo -e ${COLOREDSTAR}"  Seeding /dev with needed nodes ..."
-	(
-		[ ! -c /dev/console ] && mknod /dev/console c 5 1
-		[ ! -c /dev/tty1 ] && mknod /dev/tty1 c 4 1
-		[ ! -c /dev/null ] && mknod /dev/null c 1 3
-
-		# copy over any persistant things
-		if [[ -d /lib/udev/devices ]]
-		then
-			cp --preserve=all --recursive --update /lib/udev/devices/* /dev 2>/dev/null
-		fi
+# override devicemanager helper functions
+if [[ ${RC_DEVICEMANAGER} = udev ]] && [[ -f ${rc_base}/init.d/udev ]]
+then
+	source ${rc_base}/init.d/udev
 
-		# not provided by sysfs but needed
-		ln -snf /proc/self/fd /dev/fd
-		ln -snf fd/0 /dev/stdin
-		ln -snf fd/1 /dev/stdout
-		ln -snf fd/2 /dev/stderr
-		[[ -e /proc/kcore ]] && ln -snf /proc/kcore /dev/core
-	
-		# create problematic directories
-		mkdir -p /dev/{pts,shm}
-	)
-	evaluate_retval
-}
+elif [[ ${RC_DEVICEMANAGER} = mdev ]] && [[ -f ${rc_base}/init.d/mdev ]]
+then
+	source ${rc_base}/init.d/mdev
+fi
 
 trap "" INT QUIT TSTP
 
@@ -94,16 +26,16 @@
 
 if [[ $runlevel = sysinit ]]
 then
-	echo
-	echo -e "${COLGREEN}Starting ${COLBLUE}MAGELLAN (v${MAGEVER}) ${COLGREEN}Linux${COLDEFAULT}"
-	echo -e "Copyright 2001-2007 Niels Rogalla; http://magellan-linux.net"
-	echo
+	rc_echo
+	rc_echo -e "${COLGREEN}Starting ${COLBLUE}MAGELLAN (v${MAGEVER}) ${COLGREEN}Linux${COLDEFAULT}"
+	rc_echo "Copyright 2001-2011 Niels Rogalla; http://magellan-linux.net"
+	rc_echo
 
 	# mount proc filesystem, needed for bootsplash;
 	# no use of '/etc/rc.d/init.d/mountproc' anymore
 	if [ ! -e /proc/mounts ]
 	then
-		echo -e ${COLOREDSTAR}"Mounting proc file system ..."
+		rc_print "Mounting proc file system ..."
 		mount -n /proc
 		evaluate_retval
 	fi
@@ -112,162 +44,68 @@
 	[ -z "${RC_VERBOSE_LEVEL}" ] && RC_VERBOSE_LEVEL=3
 	echo "${RC_VERBOSE_LEVEL}" > /proc/sys/kernel/printk
 
-	# mount sys file system before udev or devfs (kernel-2.6)
-	if [[ $(kernel_major_version) = 2.6 ]]
+	# mount sys file system before udev
+	if [ -d /sys ]
 	then
-		if [ -d /sys ]
-		then
-			echo -e ${COLOREDSTAR}"Mounting sysfs file system ..."
-			mount -n -t sysfs sysfs /sys
-			evaluate_retval
-		else
-			echo -e ${COLORED}"Fatal: mountpoint /sys missing ..."
-			echo -e ${COLYELLOW}"Please create the directory /sys (mkdir -p /sys)."
-			echo -e ${COLYELLOW}"It's essential for a 2.6 kernel."
-		fi
+		rc_print "Mounting sysfs file system ..."
+		mount -n -t sysfs sysfs /sys
+		evaluate_retval
+	else
+		rc_echo -e ${COLORED}"Fatal: mountpoint /sys missing ..."
+		rc_echo -e ${COLYELLOW}"Please create the directory /sys (mkdir -p /sys)."
+		rc_echo -e ${COLYELLOW}"It's essential for a 2.6 kernel."
 	fi
 
-	## load devfs ##
-	# load devfs only with a 2.4 kernel or its really wanted with a 2.6
-	if [[ $(kernel_major_version) = 2.4 ]] || [[ ${RC_USED_DEV} = devfs ]]
+	# start device management
+	start_devicemanager
+
+	## load devpts ##
+	# devfs/udev with 2.6 has no ptys, so devpts is also needed
+	# check if we really have devpts support
+	if kernel_supports_fs devpts
 	then
-		# start devfsd daemon, needed for bootsplash;
-		# no use of '/etc/rc.d/init.d/devfs' anymore
-		# check if devfs was mounted by the kernel,
-		# if not mount it (mbuild_livecd needs this one)
-		if [ ! -e /dev/.devfsd ]
+		# /dev/pts maybe not exists.
+		# We only create this directory only if devfs was mounted,
+		# or it will fail as / is still mounted readonly
+		# udev has this dir already, only a sanity check for devfs
+		if [ ! -d "/dev/pts" -a -e "/dev/.devfsd" ] && is_fs_mounted devfs
 		then
-			echo -e ${COLOREDSTAR}"Mounting devfs file system ..."
-			mount -n -t devfs devfs /dev
-			evaluate_retval
+			mkdir -p /dev/pts &> /dev/null || \
+				rc_echo "Could not create /dev/pts !"
 		fi
 
-		if [ -e /dev/.devfsd ]
+		# now mount devpts
+		if [ -d /dev/pts ]
 		then
-			echo -e ${COLOREDSTAR}"Starting devfsd ..."
-			## directory /lib/dev-state !must! exists ##
-			/sbin/devfsd /dev &> /dev/null
+			rc_print "Mounting devpts at /dev/pts ..."
+			mount -n -t devpts -o gid=4,mode=0620 devpts /dev/pts
 			evaluate_retval
-		else
-			echo -e ${COLRED}"No devfs filesystem found ..."
-			echo -e ${COLYELLOW}"Your Kernel doesn't support the devfs filesystem."
-			echo -e ${COLYELLOW}"Devfs is necessary to run Magellan-Linux."
-			echo -e ${COLYELLOW}"Please make shure that this is enabled in your kernel."
-			echo
-			echo -e ${COLYELLOW}"Press any key to shutdown the system safely ..."
-			read
-			$rc_base/init.d/halt
 		fi
+	else
+		# devpts is not supported, give a warning
+		rc_echo -e ${COLRED}"No devpts filesystem found ..."
+		rc_echo -e ${COLYELLOW}"Your Kernel doesn't support the devpts filesystem."
+		rc_echo -e ${COLYELLOW}"Devfs/Udev with a kernel-2.6.x needs devpts,"
+		rc_echo -e ${COLYELLOW}"or no pty's are available."
+		rc_echo -e ${COLYELLOW}"Please make sure that this is enabled in your kernel."
+		rc_echo
+		rc_echo -e ${COLYELLOW}"Press any key to continue ..."
+		read
 	fi
+	## end devpts ##
 
-	#### load udev ####
-	# load udev only with a 2.6 kernel
-	if [[ $(kernel_major_version) = 2.6 ]] && [[ ${RC_USED_DEV} = udev ]]
-	then
-		# check if /dev/console exists outside tmpfs
-		[ -c /dev/console ] ; need_redirect=$?
-
-		# create a ramdisk for populating udev
-		echo -e ${COLOREDSTAR}"Mounting udev at /dev ..."
-		# many video drivers needed exec access
-		fstype=ramfs
-		# tmpfs was suggested by Greg Kroah-Hartman
-		kernel_supports_fs tmpfs && fstype=tmpfs
-		mount -n -t ${fstype} udev /dev -o exec,nosuid,mode=0755
-		evaluate_retval
-
-		# if a device tarball exists load it and if it is activated
-		echo -e ${COLOREDSTAR}"Configurating system to use udev ..."
-		if [[ ${RC_DEVICE_TARBALL} = yes ]]
-		then
-			echo -e ${COLOREDSTAR}"  Populating /dev with saved device nodes ..."
-			tar -jxpf /lib/udev-state/devices.tar.bz2 -C /dev
-			evaluate_retval
-		fi
-
-		# other eeded device nodes with udev
-		seed_dev
-
-		if [ -e /proc/sys/kernel/hotplug ]
-		then
-			if [ "$(kernel_version | sed 's:\.::g' | cut -d_ -f1)" -gt "2614" ]
-			then
-				echo -e ${COLOREDSTAR}"  Using netlink for hotplug events ..."
-				echo "" > /proc/sys/kernel/hotplug
-				evaluate_retval
-			else
-				echo -e ${COLOREDSTAR}"  Setting /sbin/udevsend as hotplug agent ..."
-				echo "/sbin/udevsend" > /proc/sys/kernel/hotplug
-				evaluate_retval
-			fi
-		else
-			echo -e ${COLOREDSTAR}${COLYELLOW}"  Kernel was not compiled with hotplug support !"
-			print_status failure
-		fi
-
-		echo -e ${COLOREDSTAR}"  Starting udevd daemon ..."
-		if [ ${need_redirect} -eq 1 ]
-		then
-			# we need to open fds 0 1 2
-			/sbin/udevd --daemon </dev/console >/dev/console 2>/dev/console
-		else
-			/sbin/udevd --daemon
-		fi
-		evaluate_retval
-
-		/lib/udev/write_root_link_rule
-		populate_udev
-
-		# create nodes that udev can't
-		echo -e ${COLOREDSTAR}"  Finializing udev configuration ..."
-		[[ -x /sbin/dmsetup ]] && /sbin/dmsetup mknodes &>/dev/null
-		[[ -x /sbin/lvm ]] && /sbin/lvm vgscan -P --mknodes --ignorelockingfailure &>/dev/null
-		[[ -x /sbin/evms_activate ]] && /sbin/evms_activate -q &>/dev/null
-		print_status success
-
-		# same thing as /dev/.devfsd
-		touch /dev/.udev
-	fi
 
-	## load devpts ##
-	# devfs/udev with 2.6 has no ptys, so devpts is also needed
-	if [[ $(kernel_major_version) = 2.6 ]]
+	## load usbfs ##
+	if kernel_supports_fs usbfs
 	then
-		# check if we really have devpts support
-		if kernel_supports_fs devpts
-		then
-			# /dev/pts maybe not exists.
-			# We only create this directory only if devfs was mounted,
-			# or it will fail as / is still mounted readonly
-			# udev has this dir already, only a sanity check for devfs
-			if [ ! -d "/dev/pts" -a -e "/dev/.devfsd" ] && is_fs_mounted devfs
-			then
-				mkdir -p /dev/pts &> /dev/null || \
-					echo "Could not create /dev/pts !"
-			fi
-
-			# now mount devpts
-			if [ -d /dev/pts ]
-			then
-				echo -e ${COLOREDSTAR}"Mounting devpts at /dev/pts ..."
-				mount -n -t devpts -o gid=4,mode=0620 devpts /dev/pts
-				evaluate_retval
-			fi
-		else
-			# devpts is not supported, give a warning
-			echo -e ${COLRED}"No devpts filesystem found ..."
-			echo -e ${COLYELLOW}"Your Kernel doesn't support the devpts filesystem."
-			echo -e ${COLYELLOW}"Devfs with a kernel-2.6.x needs devpts,"
-			echo -e ${COLYELLOW}"or no pty's are available."
-			echo -e ${COLYELLOW}"Please make shure that this is enabled in your kernel."
-			echo
-			echo -e ${COLYELLOW}"Press any key to continue ..."
-			read
-		fi
+		rc_print "Mounting usbfs at /proc/bus/usb ..."
+		mount -n -t usbfs usbfs /proc/bus/usb
+		evaluate_retval
 	fi
+	## end usbfs ##
 
-	### services state dir ###
-	echo -e ${COLOREDSTAR}"Mounting tmpfs at ${svcdir} ..."
+	## services state dir ##
+	rc_print "Mounting tmpfs at ${svcdir} ..."
 	mount -n -t tmpfs tmpfs "${svcdir}" -o rw,mode=0644,size="${svcsize}"k
 	evaluate_retval
 
@@ -287,17 +125,20 @@
 	if [[ ${RC_DEVICE_TARBALL} = yes ]] && \
 		[ -e /dev/.udev -a ! -e /dev/.devfsd -a ! -e /.bootdev ]
 	then
-		echo -e ${COLOREDSTAR}"Saving /dev device nodes ..."
+		rc_print "Saving /dev device nodes ..."
 		( cd /dev; tar -jclpf "/tmp/devices-$$.tar.bz2" * &> /dev/null )
-		mv -f "/tmp/devices-$$.tar.bz2" /lib/udev-state/devices.tar.bz2
+		mv -f "/tmp/devices-$$.tar.bz2" /lib/udev/state/devices.tar.bz2
 		evaluate_retval
 	fi
+
+	# stop device management
+	stop_devicemanager
 fi
 
 
 if [ "$runlevel" = "" ]
 then
-	echo "Usage: $0 <runlevel>" >&2
+	rc_echo "Usage: $0 <runlevel>" >&2
 	exit 1
 fi
 
@@ -307,7 +148,7 @@
 
 if [ ! -d $rc_base/rc$runlevel.d ]
 then
-	echo "$rc_base/rc$runlevel.d does not exist"
+	rc_echo "$rc_base/rc$runlevel.d does not exist"
 	exit 1
 fi
 
@@ -327,8 +168,8 @@
 			if [ ! -f $prev_start ] && [ ! -f $sysinit_start ]
 			then
 				$WARNING
-				echo "$i can't be executed because it was"
-				echo "not started in the previous runlevel ($previous)"
+				rc_echo "$i can't be executed because it was"
+				rc_echo "not started in the previous runlevel ($previous)"
 				$NORMAL
 				continue
 			fi