Diff of /trunk/installer-simple/ChangeLog

Parent Directory | Revision Log | Patch

	revision 2338 by niro, Fri Jan 3 14:13:59 2014 UTC	revision 2938 by niro, Wed Feb 3 13:57:26 2016 UTC
#	Line 1	Line 1
1		2016-02-03  Niels Rogalla <niro@magellan-linux.de>
2
3		* [r2937] bin/installer.sh.in:
4		-fixed broken hdd selection logic
5		* [r2932] ChangeLog:
6		-updated ChangeLog
7		* [r2931] VERSION:
8		-version 0.4.91-DEV
9		* [r2930] bin/installer.sh.in:
10		-support cmdline overrides of liveroot, imageroot, install root
11		and filesystem
12
13		2015-07-31  Niels Rogalla <niro@magellan-linux.de>
14
15		* [r2892] bin/installer.sh.in, functions/mkinitrd.sh:
16		-added more hardware quirks
17		* [r2891] bin/installer.sh.in:
18		-variable INSTALL_METHOD was not initialized
19		* [r2890] bin/installer.sh.in:
20		-detect flashdisk on auto installation and setup them propably on
21		zotac devices
22		* [r2889] bin/installer.sh.in:
23		-unload swap too on trap_exit
24		* [r2888] bin/installer.sh.in:
25		-always use -t fstype with mount to prevent errors in cases where
26		the filesysystem kernel module was not already loaded
27		* [r2887] bin/installer.sh.in, functions/installer-dialogs.sh:
28		-added rudimentary f2fs support
29		* [r2886] bin/installer.sh.in:
30		-set all essential env variables at the same place
31		* [r2885] bin/installer.sh.in, functions/installer-dialogs.sh,
32		functions/mkinitrd.sh:
33		-introduce single mode and allow diffrent filesystems for
34		rootfs/bootfs partitions
35		* [r2884] bin/installer.sh.in:
36		-drop falsy included function
37		* [r2883] bin/installer.sh.in:
38		-not every mkfs.FS prog like the -q option, pipe the output into
39		a log file instead
40		* [r2882] bin/installer.sh.in, functions/installer-dialogs.sh:
41		-consolidate install functions for every single method
42
43		2014-07-03  Niels Rogalla <niro@magellan-linux.de>
44
45		* [r2657] ChangeLog:
46		-updated ChangeLog
47		* [r2656] functions/dracut.sh:
48		-really silence dracut pre/post-install
49		* [r2655] bin/installer.sh.in:
50		-fixed a stupid typo
51		* [r2654] bin/installer.sh.in:
52		-re-enabled zotac detection
53		* [r2653] Makefile, bin/installer.sh.in, conf/installer.conf.in:
54		-do not hardcore LIVEROOT as /mnt/cdrom; dracut mounts livecd at
55		/run/initramfs/live so we use that as default and make this more
56		configurable
57
58		2014-07-02  Niels Rogalla <niro@magellan-linux.de>
59
60		* [r2651] ChangeLog:
61		-updated ChangeLog
62		* [r2650] conf/installer.conf.in:
63		-fixed a nasty typo
64		* [r2648] ChangeLog:
65		-updated ChangeLog
66		* [r2647] Makefile:
67		-fixed broken IMAGEROOT and INSTALLROOT variables sed lines
68		* [r2645] ChangeLog:
69		-updated ChangeLog
70		* [r2644] functions/dracut.sh:
71		-run kernel post/pre install silent
72
73		2014-04-02  Niels Rogalla <niro@magellan-linux.de>
74
75		* [r2643] ChangeLog:
76		-updated ChangeLog
77		* [r2642] bin/installer.sh.in:
78		-use new DEFAULT_IMAGEROOT/IMAGEROOT variable
79		* [r2641] Makefile, systemd/installer.service.in,
80		systemd/mnt-cdrom.mount[DEL]:
81		-dropped mnt-cdrom.mount and using dracuts /run/initramfs/live
82		iso mount path
83		* [r2640] Makefile:
84		-rename DEFAULT_CDROOT variable in favor of configurable
85		DEFAULT_IMAGEROOT variable and make INSTALLROOT configurable too
86		and generate installer.conf
87		* [r2639] conf/installer.conf.in:
88		-rename DEFAULT_CDROOT variable in favor of configurable
89		DEFAULT_IMAGEROOT variable and make INSTALLROOT configurable too
90		* [r2638] conf/installer.conf[DEL], conf/installer.conf.in[CPY]:
91		-installer.conf renamed to installer.conf.in
92
93		2014-01-08  Niels Rogalla <niro@magellan-linux.de>
94
95		* [r2517] locale/de/installer.po, locale/installer.pot:
96		-updated locales
97		* [r2516] functions/installer-dialogs.sh:
98		-fixed OK_LABEL of dialog_install_successful()
99		* [r2515] locale/de/installer.po:
100		-fixed locale
101		* [r2513] ChangeLog:
102		-updated ChangeLog
103		* [r2512] locale/de/installer.po:
104		-updated locales
105		* [r2511] systemd/installer.service.in:
106		-conflict with getty service
107		* [r2509] ChangeLog:
108		-updated ChangeLog
109		* [r2508] Makefile, systemd/installer.service.in:
110		-make installer.service locale configurable
111		* [r2507] systemd/installer.service.in:
112		-fixed broken dependencies
113		* [r2506] systemd/installer.service.in:
114		-revert last commit
115		* [r2505] systemd/installer.service.in:
116		-fixed broken dependencies
117		* [r2504] Makefile:
118		-install installer.service
119		* [r2502] ChangeLog:
120		-updated ChangeLog
121		* [r2501] locale/de/installer.po, locale/installer.pot:
122		-updated locales
123		* [r2500] bin/installer.sh.in:
124		-simplify intel quirk
125		* [r2499] bin/installer.sh.in:
126		-fixed whitespaces
127		* [r2498] functions/installer-dialogs.sh:
128		-fixed dialog_setup_hdd_info(): drivenode broken
129		* [r2497] Makefile:
130		-remove installer.pot.dump and .pot.fixed at clean target
131		* [r2496] generate-po.sh:
132		- --unique switch of msguniq seems to be broken - it merge every
133		line which has the same beginning and does not compare the whole
134		line
135		* [r2495] generate-po.sh:
136		-keep original dump pot and fixed pot to make debugging easier
137		* [r2493] bin/installer.sh.in, functions/hwdetection.sh:
138		-fix locale handling: do not export LC_MESSAGES globally, use
139		LC_ALL=C on all commands which interprets the output
140		* [r2492] functions/hwdetection.sh:
141		-if requested use sudo on all commands which require root
142		privileges
143		* [r2491] bin/installer.sh.in, functions/hwdetection.sh:
144		-refactor hdd_size_below_256mb() as device_minimum_size()
145		* [r2490] functions/hwdetection.sh:
146		-drop create_initrd() function
147		* [r2489] bin/installer.sh.in:
148		-mount sanity check
149		* [r2488] bin/installer.sh.in, functions/common-dialogs.sh,
150		functions/dracut.sh, functions/hwdetection.sh:
151		-revert last commit
152		* [r2487] bin/installer.sh.in, functions/common-dialogs.sh,
153		functions/dracut.sh, functions/hwdetection.sh:
154		-mount sanity check
155		* [r2486] bin/installer.sh.in:
156		-only install /boot if not exist
157		* [r2485] bin/installer.sh.in:
158		-renamed install_mount_rootfs() -> mount_rootfs() and
159		install_umount_rootfs() -> mount_rootfs()
160		* [r2484] bin/installer.sh.in:
161		-more sorting
162		* [r2483] bin/installer.sh.in:
163		-fixed whitespaces
164		* [r2482] bin/installer.sh.in:
165		-sorted functions
166		* [r2481] bin/installer.sh.in:
167		-renamed dialog_hardware_detection() -> task_hardware_detection()
168		* [r2480] bin/installer.sh.in:
169		-dropped deprecated bootloader and initrd functions
170		* [r2479] bin/installer.sh.in:
171		-renamed dialog_setup_hdd_partitions_auto() to
172		task_setup_hdd_partitions_auto()
173		* [r2478] bin/installer.sh.in:
174		-renamed dialog_setup_hdd_partitions_manual() to
175		task_setup_hdd_partitions_manual()
176		* [r2477] bin/installer.sh.in, functions/installer-dialogs.sh:
177		-split dialog_main() into task_main() and the dialog itself to
178		dialog_main(), which moved to installer-dialogs.sh
179		* [r2476] bin/installer.sh.in, functions/hwdetection.sh:
180		-moved hdd_size_below_256mb() to hwdetection.sh
181		* [r2475] bin/installer.sh.in, functions/installer-dialogs.sh:
182		-split dialog_setup_system_menu() into task_setup_system_menu()
183		and the dialog itself to dialog_setup_system_menu(), which moved
184		to installer-dialogs.sh
185		* [r2474] bin/installer.sh.in, functions/installer-dialogs.sh:
186		-moved dialog_setup_hdd_info() dialog_setup_hdd_info_auto() to
187		installer-dialog.sh
188		* [r2473] bin/installer.sh.in:
189		-choose better variable names
190		* [r2472] bin/installer.sh.in:
191		-honor locales
192
193		2014-01-07  Niels Rogalla <niro@magellan-linux.de>
194
195		* [r2471] bin/installer.sh.in:
196		-fixed whitespaces
197		* [r2470] bin/installer.sh.in:
198		-fixed dialog_hardware_detection()
199		* [r2469] bin/installer.sh.in:
200		-fixed dialog_setup_hdd_info()
201		* [r2468] bin/installer.sh.in:
202		-CANCEL_LABEL=Exit for dialog_main
203		* [r2467] bin/installer.sh.in:
204		-dialog_hardware_detection() size
205		* [r2466] functions/hwdetection.sh:
206		-added iface_has_link() function (from dracut)
207		* [r2465] Makefile:
208		-always create installer.sh and installer.service
209		* [r2462] make-tarball.sh:
210		-fixed repo uri
211		* [r2460] bin/installer.sh.in, functions/installer-dialogs.sh:
212		-fixed spelling
213		* [r2459] locale/de/installer.po, locale/installer.pot:
214		-updates locales
215		* [r2458] ChangeLog:
216		-updated ChangeLog
217		* [r2457] functions/common-dialogs.sh:
218		-revert the last commit
219		* [r2456] Makefile:
220		-only re-create bin/installer.sh and systemd/installer.service on
221		changes
222		* [r2455] Makefile:
223		-install generated mo files
224		* [r2454] Makefile:
225		-apply SYSCONFDIR
226		* [r2453] Makefile:
227		-revert last commit
228		* [r2452] ChangeLog, Makefile, functions/common-dialogs.sh:
229		-apply SYSCONFDIR
230		* [r2451] Makefile:
231		-make pot messages unique
232		* [r2450] Makefile:
233		-generate pot from all provided functions
234		* [r2449] Makefile:
235		-install all required functions
236		* [r2448] Makefile:
237		-make pkg-config and cat commands variable too
238		* [r2447] Makefile:
239		-fixed broken default SYSCONFDIR
240		* [r2446] bin/installer.sh.in, functions/dracut.sh[ADD],
241		functions/grub.sh[ADD], functions/grub2.sh[ADD],
242		functions/mkinitrd.sh[ADD]:
243		-disable old mkinitrd and bootloader functions (will get removed
244		soon) and add includes to support grub1, grub2, mkinitrd and
245		dracut
246		* [r2445] functions/common.sh[ADD]:
247		-add common.sh
248		* [r2444] bin/installer.sh.in:
249		-use addconfig() where possible and fixed a grub-mkdevicemap
250		error message
251		* [r2443] bin/installer.sh.in:
252		-install_system_settings(): use addconfig()
253		* [r2442] bin/installer.sh.in:
254		-only apply framebuffer quirk if fbsplash is used
255		* [r2441] bin/installer.sh.in:
256		-always use uuids and removed obsolete is_uuid_supported()
257		function
258		* [r2440] bin/installer.sh.in:
259		-use callers of bootloader.sh and initrd-tools.sh includes
260		* [r2439] bin/installer.sh.in:
261		is_initrd_supported() is provided by initrd-tools
262		* [r2438] bin/installer.sh.in:
263		-get_uuid() is provided by hwdetection
264		* [r2437] bin/installer.sh.in:
265		-sanitize SWAPHDD and BOOTHDD variables for the future
266		* [r2436] bin/installer.sh.in:
267		-use chrooted() from hwdetection
268		* [r2435] bin/installer.sh.in:
269		-add more mount sanity checks
270		* [r2434] bin/installer.sh.in:
271		-use pushd/popd instead of simple cd
272		* [r2433] bin/installer.sh.in:
273		-use pushd/popd instead of simple cd
274		* [r2432] bin/installer.sh.in:
275		-support more filesystems rather than only ext3
276		* [r2431] bin/installer.sh.in:
277		-add a note about an improved smartcard detection method
278		* [r2430] bin/installer.sh.in:
279		-commented unused stuff
280		* [r2429] bin/installer.sh.in:
281		-moved run_hardware_detection_disks() to a better place
282		* [r2428] bin/installer.sh.in, functions/bootloader.sh[ADD],
283		functions/initrd-tools.sh[ADD]:
284		-select bootloader and initrd via an include which calls the
285		right routines
286		* [r2427] bin/installer.sh.in, functions/installer-dialogs.sh:
287		-introduce dialog_install_initrd()
288		* [r2426] bin/installer.sh.in, functions/installer-dialogs.sh:
289		-moved serveral dialog functions to install-dialogs and use
290		common-dialog functions for them
291		* [r2425] bin/installer.sh.in:
292		dialog_main(): use menubox()
293		* [r2424] bin/installer.sh.in:
294		-select better variable names
295		* [r2423] bin/installer.sh.in:
296		-renamed dialog_install_meter() to install_meter()
297		* [r2422] bin/installer.sh.in, functions/installer-dialogs.sh:
298		-introduce dialog_select_target_harddrive() function
299		* [r2421] bin/installer.sh.in, functions/installer-dialogs.sh:
300		-introduce dialog_no_harddrive_found() function
301		* [r2420] functions/common-dialogs.sh,
302		functions/installer-dialogs.sh[ADD]:
303		-moved welcome() and finish() to installer-dialogs and use
304		messagebox()
305		* [r2419] bin/installer.sh.in:
306		$installdevs was replaced with $ALL_DISKS in hardware-detection
307		routines
308		* [r2418] bin/installer.sh.in:
309		$installdevs was replaced with $ALL_DISKS in hardware-detection
310		routines
311		* [r2417] bin/installer.sh.in:
312		dialog_hardware_detection(): use messagebox()
313		* [r2416] bin/installer.sh.in:
314		dialog_setup_system_menu(): use menubox()
315		* [r2415] bin/installer.sh.in:
316		-fixed wrong var
317		* [r2414] bin/installer.sh.in:
318		-fixed wrong var
319		* [r2413] bin/installer.sh.in:
320		-setup_hdd_partitions_manuell -> setup_hdd_partitions_manual,
321		-dialog_setup_hdd_partitions_manuell ->
322		-dialog_setup_hdd_partitions_manual
323		* [r2412] bin/installer.sh.in:
324		-select better variable names
325		* [r2411] bin/installer.sh.in:
326		dialog_set_hdd_info_*(): use messagebox() from common-dialogs
327		* [r2410] bin/installer.sh.in:
328		-use bash substition instead of sed
329		* [r2409] bin/installer.sh.in:
330		-set some traps to abort in a safe manner
331		* [r2408] functions/hwdetection.sh:
332		-introduce is_mounted() function and use it
333		* [r2407] functions/hwdetection.sh:
334		-fixed whitespaces
335		* [r2406] functions/hwdetection.sh:
336		-fixed broken get_hwinfo_smp()
337		* [r2405] functions/hwdetection.sh:
338		-simlify commands by removing cut call
339		* [r2404] bin/installer.sh.in:
340		-use more defaults from installer.conf
341		* [r2403] bin/installer.sh.in:
342		-do not call hwdetection.sh include twice
343		* [r2402] bin/installer.sh.in:
344		-call common.sh, common-dialogs.sh, hwdetection.sh and
345		install-dialogs.sh
346		* [r2401] bin/installer.sh.in:
347		-call includes via loop to simplify things
348		* [r2400] conf/installer.conf:
349		ore default settings via config file
350		* [r2399] bin/installer.sh.in:
351		-only support one ROOTHDD partition and drop all _flash()
352		functions
353		* [r2398] bin/installer.sh.in:
354		dialog_warning() use yesnobox from common-dialogs.sh
355		* [r2397] bin/installer.sh.in:
356		-moved die() to top - it should be the first function as it gets
357		called by the includes
358		* [r2396] functions/common-dialogs.sh:
359		-added menubox() function to print menuboxes
360		* [r2395] functions/common-dialogs.sh:
361		-added infobox() function to print infoboxes
362		* [r2394] functions/common-dialogs.sh:
363		-change some default sizes
364		* [r2393] functions/common-dialogs.sh:
365		-empty headers are allowed
366		* [r2392] functions/common-dialogs.sh:
367		-use getopts
368		* [r2391] functions/common-dialogs.sh:
369		-renamed yesno() to yesnobox()
370		* [r2390] functions/common-dialogs.sh:
371		-renamed gauge() to gaugebox()
372		* [r2389] functions/common-dialogs.sh:
373		-define default OK_LABEL and CANCEL_LABEL
374
375		2014-01-06  Niels Rogalla <niro@magellan-linux.de>
376
377		* [r2357] generate-po.sh:
378		-introduce unique_pot() to fix duplicated entries in pot files
379		* [r2356] generate-po.sh:
380		-fixed sorting on update with msgmerge bia --sort-by-files switch
381		* [r2355] generate-po.sh:
382		-use msginit to create initial po files to have valid header
383		information included
384		* [r2354] generate-po.sh:
385		-fixed whitespaces
386		* [r2353] locale/de/installer.po, locale/installer.pot:
387		-updated locale data
388
389		2014-01-04  Niels Rogalla <niro@magellan-linux.de>
390
391		* [r2352] locale[ADD], locale/de[ADD], locale/de/installer.po[ADD],
392		locale/installer.pot[ADD]:
393		-initial localization
394		* [r2351] Makefile:
395		-create and install localization
396		* [r2350] generate-po.sh[ADD]:
397		added localization helper
398
399	2014-01-03  Niels Rogalla <niro@magellan-linux.de>	2014-01-03  Niels Rogalla <niro@magellan-linux.de>
400
401		* [r2349] Makefile:
402		-fixed a typo
403		* [r2348] Makefile:
404		-fixed a typo
405		* [r2347] Makefile:
406		-fixed a typo
407		* [r2346] functions/common-dialogs.sh[CPY],
408		functions/common.sh[DEL]:
409		-renamed common.sh to common-dialogs.sh
410		* [r2345] bin/installer.sh.in:
411		-removed which dependency
412		* [r2344] bin/installer.sh.in:
413		use hwdetection via hwinfo with run_hardware_detection_disks()
414		function
415		* [r2343] bin/installer.sh.in, conf/installer.conf:
416		-renamed CDPATH variable to CDROOT
417		* [r2342] bin/installer.sh.in, conf/installer.conf:
418		-renamed INSTALLPATH variable to INSTALLROOT
419		* [r2341] bin/installer.sh.in:
420		-fixed whitespaces and variable escaping
421		* [r2340] bin/installer.sh.in:
422		-always declare used variables and check if included one are sane
423		and sort the variables for better readability.
424		* [r2339] bin/installer.sh.in:
425		-ignore the environment, always use C lcoale
426		* [r2338] ChangeLog:
427		-updated ChangeLog
428	* [r2337] functions/common.sh[ADD]:	* [r2337] functions/common.sh[ADD]:
429	-add some common dialog functions	-add some common dialog functions
430	* [r2336] bin/installer.sh.in:	* [r2336] bin/installer.sh.in:

---

Colored Diff Long Colored Diff Full Colored Diff Unidiff Context Diff Side by Side

Legend: Removed from v.2338   changed lines   Added in v.2938