Magellan Linux

  • Back to homepage
    • /[magellan-source]/trunk/installer-simple/bin/installer.sh.in

    Diff of /trunk/installer-simple/bin/installer.sh.in

    Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

    revision 2421 by niro, Tue Jan 7 13:50:50 2014 UTC revision 2439 by niro, Tue Jan 7 14:37:35 2014 UTC
    # Line 27  for inc in %SYSCONFDIR%/installer.conf \ Line 27  for inc in %SYSCONFDIR%/installer.conf \
    27   ${INSTALLER_LIBDIR}/functions/common.sh \   ${INSTALLER_LIBDIR}/functions/common.sh \
    28   ${INSTALLER_LIBDIR}/functions/common-dialogs.sh \   ${INSTALLER_LIBDIR}/functions/common-dialogs.sh \
    29   ${INSTALLER_LIBDIR}/functions/hwdetection.sh \   ${INSTALLER_LIBDIR}/functions/hwdetection.sh \
    30     ${INSTALLER_LIBDIR}/functions/bootloader.sh \
    31     ${INSTALLER_LIBDIR}/functions/initrd-tools.sh \
    32   ${INSTALLER_LIBDIR}/functions/installer-dialogs.sh   ${INSTALLER_LIBDIR}/functions/installer-dialogs.sh
    33  do  do
    34   if [ -e ${inc} ]   if [ -e ${inc} ]
    # Line 191  dialog_hardware_detection() Line 193  dialog_hardware_detection()
    193  dialog_setup_hdd_partitions_manual()  dialog_setup_hdd_partitions_manual()
    194  {  {
    195   local i   local i
    196     local retval
    197    
    198   if [[ -z ${ALL_DISKS} ]]   if [[ -z ${ALL_DISKS} ]]
    199   then   then
    200   dialog_no_harddrive_found   dialog_no_harddrive_found
    201   exit 1   exit 1
    202   else   else
    203     HDD=$(dialog_select_target_harddrive)
    204   echo "dialog \\" > /tmp/hddtmp.sh   retval=$?
    205   echo "--backtitle \"${TITLE}\" \\" >> /tmp/hddtmp.sh   [[ ${retval} -eq 1 ]] && return 1
    206   echo "--ok-label \"Weiter\" \\" >> /tmp/hddtmp.sh   if [[ ${retval} -eq 0 ]]
      echo "--cancel-label \"Beenden\" \\" >> /tmp/hddtmp.sh  
      echo "--stdout \\" >> /tmp/hddtmp.sh  
      echo "--menu \"Installations Laufwerk auswaehlen:\" 10 70 3 \\" >> /tmp/hddtmp.sh  
       
      for i in ${ALL_DISKS}  
      do  
      echo "\"${i}\" \"\" \\" >> /tmp/hddtmp.sh  
      done  
      echo -e "\n" >> /tmp/hddtmp.sh  
       
      chmod a+x /tmp/hddtmp.sh  
      HDD="$(/tmp/hddtmp.sh)"  
      RES=$?  
      [[ ${RES} -eq 1 ]] && return 1  
      if [[ ${RES} -eq 0 ]]  
    207   then   then
    208   dialog_setup_hdd_info   dialog_setup_hdd_info
    209   setup_hdd_partitions_manual   setup_hdd_partitions_manual
    # Line 226  dialog_setup_hdd_partitions_manual() Line 214  dialog_setup_hdd_partitions_manual()
    214  dialog_setup_hdd_partitions_auto()  dialog_setup_hdd_partitions_auto()
    215  {  {
    216   local i   local i
    217     local retval
    218    
    219   if [[ -z ${ALL_DISKS} ]]   if [[ -z ${ALL_DISKS} ]]
    220   then   then
    221   dialog_no_harddrive_found   dialog_no_harddrive_found
    222   exit 1   exit 1
    223   else   else
    224     HDD=$(dialog_select_target_harddrive)
    225   echo "dialog \\" > /tmp/hddtmp.sh   retval=$?
    226   echo "--backtitle \"${TITLE}\" \\" >> /tmp/hddtmp.sh   [[ ${retval} -eq 1 ]] && return 1
    227   echo "--ok-label \"Weiter\" \\" >> /tmp/hddtmp.sh   if [[ ${retval} -eq 0 ]]
      echo "--cancel-label \"Beenden\" \\" >> /tmp/hddtmp.sh  
      echo "--stdout \\" >> /tmp/hddtmp.sh  
      echo "--menu \"Installations Laufwerk auswaehlen:\" 10 70 3 \\" >> /tmp/hddtmp.sh  
       
      for i in ${ALL_DISKS}  
      do  
      echo "\"${i}\" \"\" \\" >> /tmp/hddtmp.sh  
      done  
      echo -e "\n" >> /tmp/hddtmp.sh  
       
      chmod a+x /tmp/hddtmp.sh  
      HDD="$(/tmp/hddtmp.sh)"  
      RES=$?  
      [[ ${RES} -eq 1 ]] && return 1  
      if [[ ${RES} -eq 0 ]]  
    228   then   then
    229   dialog_setup_hdd_info_auto   dialog_setup_hdd_info_auto
    230   dialog_setup_hdd_create_partitions   dialog_setup_hdd_create_partitions
    # Line 259  dialog_setup_hdd_partitions_auto() Line 233  dialog_setup_hdd_partitions_auto()
    233   fi   fi
    234  }  }
    235    
    236  run_hardware_detection_disks()  install_meter()
     {  
      local bootdev  
       
      # all disks but exclude ramdisks  
      export ALL_DISKS=$(get_hwinfo disk | sed '/\/dev\/ram[0-9].*/d')  
      # remove the boot device from ALL_DISKS if it was an usbstick  
      if [[ $(grep '[[:space:]]/mnt/cdrom[[:space:]]' /proc/mounts | cut -d' ' -f3) != iso9660 ]]  
      then  
      bootdev="$(grep '[[:space:]]/mnt/cdrom[[:space:]]' /proc/mounts | cut -d' ' -f1 | sed 's:[0-9]::g')"  
      export ALL_DISKS=$(echo "${ALL_DISKS}" | grep -v "${bootdev}")  
      fi  
      export ALL_CDROMS="$(get_hwinfo cdrom)"  
     }  
       
     dialog_setup_hdd_create_partitions()  
     {  
      dialog \  
      --backtitle "${TITLE}" \  
      --infobox "Erstelle Disk Partitionen ..." 3 70  
     }  
       
     dialog_setup_hdd_format()  
     {  
      dialog \  
      --backtitle "${TITLE}" \  
      --infobox "Erstelle Datei-Systeme ..." 3 70  
     }  
       
     dialog_install_settings()  
     {  
      dialog \  
      --backtitle "${TITLE}" \  
      --infobox "Speichere System-Einstellungen ..." 3 70  
     }  
       
     dialog_install_system_image()  
     {  
      dialog \  
      --backtitle "${TITLE}" \  
      --gauge "Kopiere System-Image ..." 6 80  
     }  
       
     dialog_install_meter()  
    237  {  {
    238   while [[ ${CURRENTLINE} != ${TOTALLINES} ]]   while [[ ${CURRENTLINE} != ${TOTALLINES} ]]
    239   do   do
    # Line 315  dialog_install_meter() Line 246  dialog_install_meter()
    246   return 0   return 0
    247  }  }
    248    
       
     dialog_install_bootsector()  
     {  
      dialog \  
      --backtitle "${TITLE}" \  
      --infobox "Schreibe den Bootsektor ..." 3 70  
     }  
       
     dialog_install_successful()  
     {  
      dialog \  
      --backtitle "${TITLE}" \  
      --colors \  
      --msgbox "Die Installation war \Z2erfolgreich\Zn." 5 81  
     }  
       
     dialog_install_failure()  
     {  
      dialog \  
      --backtitle "${TITLE}" \  
      --colors \  
      --msgbox "Die Installation ist \Z1Fehlgeschlagen\Zn.\n\n\  
      Fehler bei ${ERROR}, RetVal: ${RETVAL} \  
      " 10 81  
     }  
       
    249  dialog_main()  dialog_main()
    250  {  {
    251   METHOD=0   local method=0
    252     local retval
    253    
    254   while [[ ${METHOD} -le 2 ]]   while [[ ${method} -le 2 ]]
    255   do   do
    256   METHOD=$(dialog \   method=$(menubox $"Configuration:" \
    257   --backtitle "${TITLE}" \   $"1:Install system" \
    258   --no-cancel \   $"2:Show detected harddrives" \
    259   --ok-label "Weiter" \   $"3:Exit and reboot" \
    260   --stdout \   $"4:Exit and drop into a shell")
    261   --menu "Konfiguration" 14 70 5 \   retval=$?
    262   "1" "AutoSta_LX installieren" \   [[ ${retval} -eq 1 ]] && exit 1
    263   "2" "Uebersicht gefundener Laufwerke" \   if [[ ${retval} -eq 0 ]]
      "3" "Beenden und neustarten" \  
      "4" "Beenden und eine Shell starten")  
      RES=$?  
      [[ ${RES} -eq 1 ]] && exit 1  
      if [[ ${RES} -eq 0 ]]  
    264   then   then
    265   case ${METHOD} in   case ${method} in
    266   "1") dialog_setup_system_menu ;;   "1") dialog_setup_system_menu ;;
    267   "2") dialog_hardware_detection ;;   "2") dialog_hardware_detection ;;
    268   "3") install_do_reboot ;;   "3") install_do_reboot ;;
    # Line 380  run_hardware_detection() Line 281  run_hardware_detection()
    281    
    282   hwinfo="$(hwinfo --bios --storage --pci --gfxcard --sys)"   hwinfo="$(hwinfo --bios --storage --pci --gfxcard --sys)"
    283    
    284   # check for special devices/clients:   ## check for special devices/clients:
    285   # if zotac a zotac and the disk is a removeable device, then add rootdelay to kernelcmd   ## if zotac a zotac and the disk is a removeable device, then add rootdelay to kernelcmd
    286   local removable=0   #local removable=0
    287   if [[ ! -z $(echo "${hwinfo}" | grep -i zotac) ]]   #if [[ ! -z $(echo "${hwinfo}" | grep -i zotac) ]]
    288   then   #then
    289   for i in /sys/block/[hs]d*/removable   #for i in /sys/block/[hs]d*/removable
    290   do   #do
    291   if [[ $(< ${i}) = 1 ]]   #if [[ $(< ${i}) = 1 ]]
    292   then   #then
    293   removable=1   #removable=1
    294   fi   #fi
    295   done   #done
    296     ## smartcard = udevadm info -n /dev/sda -a | grep -i 'configuration.*card'
    297   # only add this for grub legacy, grub2 detect these settings on its own  
    298   export GRUBLEGACYOPTS="rootdelay=8"   ## only add this for grub legacy, grub2 detect these settings on its own
    299   # there are to zotac types in the wild, nvidia based gfx and intel   #export GRUBLEGACYOPTS="rootdelay=8"
    300   if [[ ! -z $(echo "${hwinfo}" | grep -i nouveau) ]]   ## there are to zotac types in the wild, nvidia based gfx and intel
    301   then   #if [[ ! -z $(echo "${hwinfo}" | grep -i nouveau) ]]
    302   export SPECIALDEVICE="zotac_nvidia"   #then
    303   else   #export SPECIALDEVICE="zotac_nvidia"
    304   export SPECIALDEVICE="zotac_intel"   #else
    305   fi   #export SPECIALDEVICE="zotac_intel"
    306   fi   #fi
    307     #fi
    308    
    309   # check for special devices/clients:   # check for special devices/clients:
    310   # if a rangee and disk ist smaller then 256mb move partion one block further ahead   # if a rangee and disk ist smaller then 256mb move partion one block further ahead
    # Line 431  run_hardware_detection() Line 333  run_hardware_detection()
    333   fi   fi
    334  }  }
    335    
    336    run_hardware_detection_disks()
    337    {
    338     local bootdev
    339    
    340     # all disks but exclude ramdisks
    341     export ALL_DISKS=$(get_hwinfo disk | sed '/\/dev\/ram[0-9].*/d')
    342     # remove the boot device from ALL_DISKS if it was an usbstick
    343     if [[ $(grep '[[:space:]]/mnt/cdrom[[:space:]]' /proc/mounts | cut -d' ' -f3) != iso9660 ]]
    344     then
    345     bootdev="$(grep '[[:space:]]/mnt/cdrom[[:space:]]' /proc/mounts | cut -d' ' -f1 | sed 's:[0-9]::g')"
    346     export ALL_DISKS=$(echo "${ALL_DISKS}" | grep -v "${bootdev}")
    347     fi
    348     export ALL_CDROMS="$(get_hwinfo cdrom)"
    349    }
    350    
    351  hdd_size_below_256mb()  hdd_size_below_256mb()
    352  {  {
    353   local hdd="$1"   local hdd="$1"
    # Line 453  setup_hdd_partitions_auto() Line 370  setup_hdd_partitions_auto()
    370  {  {
    371   ROOTHDD="${HDD}1"   ROOTHDD="${HDD}1"
    372    
    373     # sanity check - should not happen
    374     if is_mounted --device "${ROOTHDD}"
    375     then
    376     echo "partition: device ${ROOTHDD} is already mounted, umount it" >&2
    377     umount "${ROOTHDD}"
    378     fi
    379    
    380   # run this only if FDISKPARTITIONBELOW256MB is not already 1   # run this only if FDISKPARTITIONBELOW256MB is not already 1
    381   if [[ ${FDISKPARTIONBELOW256MB} != 1 ]]   if [[ ${FDISKPARTIONBELOW256MB} != 1 ]]
    382   then   then
    # Line 514  EOF Line 438  EOF
    438  setup_hdd_partitions_manual()  setup_hdd_partitions_manual()
    439  {  {
    440   ROOTHDD="${HDD}1"   ROOTHDD="${HDD}1"
    441     SWAPHDD=""
    442   ## hdds partitionieren manual   BOOTHDD=""
    443   cfdisk ${HDD} || dialog_die   cfdisk ${HDD} || dialog_die
    444  }  }
    445    
    446  setup_hdd_format()  setup_hdd_format()
    447  {  {
    448   mke2fs -j -q ${ROOTHDD} || dialog_die   # sanity check - should not happen
    449     if is_mounted --device "${ROOTHDD}"
    450     then
    451     echo "format: device ${ROOTHDD} is already mounted, umount it" >&2
    452     umount "${ROOTHDD}"
    453     fi
    454    
    455     mkfs."${FORMAT_FILESYSTEM}" -q "${ROOTHDD}" || dialog_die
    456  }  }
    457    
    458  install_mount_rootfs()  install_mount_rootfs()
    459  {  {
    460   mount ${ROOTHDD} ${INSTALLROOT} || dialog_die   is_mounted --location "${INSTALLROOT}" || mount "${ROOTHDD}" "${INSTALLROOT}"
    461   install -d ${INSTALLROOT}/boot || dialog_die   install -d ${INSTALLROOT}/boot || dialog_die
      cd ${INSTALLROOT} || dialog_die  
    462  }  }
    463    
    464  install_system_image()  install_system_image()
    465  {  {
    466     pushd ${INSTALLROOT} > /dev/null
    467   tar xvjpf ${CDROOT}/system/${CDIMAGENAME} -C ${INSTALLROOT}   tar xvjpf ${CDROOT}/system/${CDIMAGENAME} -C ${INSTALLROOT}
    468     popd > /dev/null
    469  }  }
    470    
    471  install_bootsector_chroot()  install_bootsector_chroot()
    # Line 637  exit 0 Line 569  exit 0
    569  CHROOTEOF  CHROOTEOF
    570   fi   fi
    571    
    572   ## enter chroot   # run installrc
    573   mount -t proc proc ${INSTALLROOT}/proc   chrooted /bin/bash --rcfile /root/.installrc -i
      mount -t sysfs sysfs ${INSTALLROOT}/sys  
      mount -o bind /dev ${INSTALLROOT}/dev  
      chroot ${INSTALLROOT} /bin/bash --rcfile /root/.installrc -i  
      umount ${INSTALLROOT}/proc  
      umount ${INSTALLROOT}/sys  
      umount ${INSTALLROOT}/dev  
    574   rm ${INSTALLROOT}/root/.installrc   rm ${INSTALLROOT}/root/.installrc
    575  }  }
    576    
     is_initrd_supported()  
     {  
      # only generate initrds if the cmd exists  
      [[ -x ${INSTALLROOT}/sbin/mkinitrd ]] && return 0  
      return 1  
     }  
       
    577  install_initrd_chroot()  install_initrd_chroot()
    578  {  {
    579   # only generate initrds if the cmd exists   # only generate initrds if the cmd exists
    # Line 697  mkinitrd -f /boot/$(readlink /boot/initr Line 616  mkinitrd -f /boot/$(readlink /boot/initr
    616  exit 0  exit 0
    617  CHROOTEOF  CHROOTEOF
    618    
    619   ## enters chroot   # run installrc
    620   mount -t proc proc ${INSTALLROOT}/proc   chrooted /bin/bash --rcfile /root/.installrc -i
      mount -t sysfs sysfs ${INSTALLROOT}/sys  
      mount -o bind /dev ${INSTALLROOT}/dev  
      chroot ${INSTALLROOT} /bin/bash --rcfile /root/.installrc -i  
      umount ${INSTALLROOT}/proc  
      umount ${INSTALLROOT}/sys  
      umount ${INSTALLROOT}/dev  
    621   rm ${INSTALLROOT}/root/.installrc   rm ${INSTALLROOT}/root/.installrc
    622  }  }
    623    
    # Line 722  is_uuid_supported() Line 635  is_uuid_supported()
    635   return 1   return 1
    636  }  }
    637    
     get_uuid()  
     {  
      local UUID  
      local SEC_TYPE  
      local TYPE  
       
      local dev="$1"  
      [[ -z ${dev} ]] && dialog_die "no dev given"  
       
      # check if given device is already an UUID  
      if [[ ${dev/UUID=/}x != ${dev}x ]]  
      then  
      eval "${dev}"  
      else  
      eval $(busybox.mkinitrd blkid ${dev} | grep "${dev}:" | sed 's/.*:\ //')  
      fi  
      echo "${UUID}"  
     }  
       
    638  install_system_settings()  install_system_settings()
    639  {  {
    640   # schreibe fstab   # schreibe fstab
    # Line 774  install_system_settings() Line 668  install_system_settings()
    668    
    669  install_umount_rootfs()  install_umount_rootfs()
    670  {  {
    671   cd /   is_mounted --location ${INSTALLROOT}/boot && umount ${INSTALLROOT}/boot
    672   umount ${INSTALLROOT}/boot || dialog_die   is_mounted --location ${INSTALLROOT} && umount ${INSTALLROOT}
      umount ${INSTALLROOT} || dialog_die  
    673  }  }
    674    
    675  install_do_reboot()  install_do_reboot()
    # Line 796  run_install_normal() Line 689  run_install_normal()
    689   dialog_setup_hdd_format   dialog_setup_hdd_format
    690   setup_hdd_format > /dev/null   setup_hdd_format > /dev/null
    691   install_mount_rootfs   install_mount_rootfs
    692   (install_system_image > /tmp/install.log) 2> /tmp/install_errors.log | dialog_install_meter | dialog_install_system_image   (install_system_image > /tmp/install.log) 2> /tmp/install_errors.log | install_meter | dialog_install_system_image
    693    
    694   dialog_install_settings   dialog_install_settings
    695   sleep 1   sleep 1
    696   install_system_settings   install_system_settings
    697     dialog_install_initrd
    698   install_initrd_chroot   install_initrd_chroot
    699    
    700   dialog_install_bootsector   dialog_install_bootsector
    # Line 818  run_install_auto() Line 712  run_install_auto()
    712   dialog_setup_hdd_format   dialog_setup_hdd_format
    713   setup_hdd_format > /dev/null   setup_hdd_format > /dev/null
    714   install_mount_rootfs   install_mount_rootfs
    715   (install_system_image > /tmp/install.log) 2> /tmp/install_errors.log | dialog_install_meter | dialog_install_system_image   (install_system_image > /tmp/install.log) 2> /tmp/install_errors.log | install_meter | dialog_install_system_image
    716    
    717   dialog_install_settings   dialog_install_settings
    718   sleep 1   sleep 1
    719   install_system_settings   install_system_settings
    720     dialog_install_initrd
    721   install_initrd_chroot   install_initrd_chroot
    722    
    723   dialog_install_bootsector   dialog_install_bootsector
    Legend:
    Removed from v.2421  
    changed lines
      Added in v.2439