Diff of /trunk/installer-simple/bin/installer.sh.in

Parent Directory | Revision Log | Patch

	revision 2323 by niro, Fri Jan 3 13:19:11 2014 UTC	revision 2475 by niro, Wed Jan 8 08:59:52 2014 UTC
#	Line 7	Line 7
7	# Niels Rogalla <niro@magellan-linux.de>	# Niels Rogalla <niro@magellan-linux.de>
8	#	#
9
10	#images: (get ${CDIMAGENAME})	# setup locales
11	source /mnt/cdrom/system/images.conf	TEXTDOMAIN=installer
12		LC_MESSAGES=C
13
14	#Includes	# include dir
15	source /usr/lib/installer/functions/findhdd.sh > /dev/null	INSTALLER_LIBDIR="%LIBDIR%"
	### bugfix ###############################
	cdromdev="$(echo ${cdromdev} | sed 's/ //')"
	########################################
16
17	### System/Config Version	# TOTALLINES=linecount of ${CDIMAGENAME}-tarball -1 !
18	VERSION="%VERSIONTAG%"	# -> now in images.conf
19	TITLE="Installer - ${VERSION}"	CURRENTLINE=0
20
21	CDPATH="/mnt/cdrom"	die()
22	INSTALLPATH="/mnt/magellan"	{
23		echo "Error: $@"
24		exit 1
25		}
26
27	### WICHTIG: anzahl lines in der autosta_lx.tar.gz -1	# load common includes
28		for inc in %SYSCONFDIR%/installer.conf \
29		${INSTALLER_LIBDIR}/functions/common.sh \
30		${INSTALLER_LIBDIR}/functions/common-dialogs.sh \
31		${INSTALLER_LIBDIR}/functions/hwdetection.sh \
32		${INSTALLER_LIBDIR}/functions/bootloader.sh \
33		${INSTALLER_LIBDIR}/functions/initrd-tools.sh \
34		${INSTALLER_LIBDIR}/functions/installer-dialogs.sh
35		do
36		if [ -e ${inc} ]
37		then
38		source "${inc}"
39		else
40		die "'${inc}' not found"
41		fi
42		done
43
44		# TOTALLINES=linecount of ${CDIMAGENAME}-tarball -1 !
45		# -> now in images.conf
46		CDIMAGENAME=""
47		TOTALLINES=""
48	CURRENTLINE=0	CURRENTLINE=0
49	#TOTALLINES=11072 # -> now in images.conf	if [ -e /mnt/cdrom/system/images.conf ]
50		then
51		source /mnt/cdrom/system/images.conf
52		# check if all required variables are set
53		[[ -z ${CDIMAGENAME} ]] && die "CDIMAGENAME is empty in /mnt/cdrom/system/images.conf"
54		[[ -z ${TOTALLINES} ]] && die "TOTALLINES is empty in /mnt/cdrom/system/images.conf"
55		else
56		die "/mnt/cdrom/system/images.conf not found"
57		fi
58
59	# standard kernel opts	### System/Config Version
60	KERNELOPTS="quiet video=1024x768"	VERSION="%VERSIONTAG%"
61		TITLE="${DEFAULT_TITLE} - ${VERSION}"
62
63	# grub options	# some sane defaults
64		CDROOT="${DEFAULT_CDROOT}"
65		INSTALLROOT="${DEFAULT_INSTALLROOT}"
66		KERNELPKG="${DEFAULT_KERNELPKG}"
67		KERNELOPTS="${DEFAULT_KERNELOPTS}"
68	GRUBLEGACYOPTS=""	GRUBLEGACYOPTS=""
69	GRUB2OPTS=""	GRUB2OPTS=""
	# fdisk options
70	FDISKPARTIONBELOW256MB=0	FDISKPARTIONBELOW256MB=0
	# default specialdevices
71	SPECIALDEVICE=""	SPECIALDEVICE=""
72	FORMFACTOR="desktop"	FORMFACTOR="${DEFAULT_FORMFACTOR}"
73		FORMAT_FILESYSTEM="${DEFAULT_FILESYSTEM}"
	# target filesystem
	FORMAT_FILESYSTEM="ext4"
74
75	#################################################	#################################################
76	#  DIALOG BOXEN #	#  DIALOG BOXEN #
77	#################################################	#################################################
78
79	die()	trap_exit()
80		{
81		is_mounted --location "${INSTALLROOT}/dev" && umount ${INSTALLROOT}/dev
82		is_mounted --location "${INSTALLROOT}/proc" && umount ${INSTALLROOT}/proc
83		is_mounted --location "${INSTALLROOT}/sys" && umount ${INSTALLROOT}/sys
84		is_mounted --location "${INSTALLROOT}/boot" && umount ${INSTALLROOT}/boot
85		is_mounted --location "${INSTALLROOT}" && umount ${INSTALLROOT}
86
87		echo $"Installation aborted."
88		exit 1
89		}
90
91		dialog_die()
92	{	{
93	ERROR=$1	ERROR="$1"
94	RETVAL=$?	RETVAL="$?"
95	dialog_install_failure	dialog_install_failure
96	exit 1	exit 1
97	}	}
98
99	dialog_warning()	dialog_warning()
100	{	{
101	dialog \	local retval
102	--backtitle "${TITLE}" \
103	--colors \	yesnobox $"\Z1 !!! Warning !!! \Zn\n\n\This harddrive will be irreversibly erased.\n\n\Do you want to continue ?"
104	--defaultno \	retval=$?
105	--yesno "\Z1 !!! Achtung !!! \Zn\n\n\	if [[ ${retval} -eq 1 ]]
	Diese Festplatte wird unwiederruflich geloescht werden.\n\n\
	Soll ich wirklich fortfahren ?" 10 70
	RES=$?
	if [[ ${RES} -eq 1 ]]
106	then	then
107	clear	clear
108	echo "Der Vorgang wurde abgebrochen."	echo $"The process was aborted."
109	exit 1	exit 1
110	fi	fi
111	}	}
112
113	dialog_setup_hdd_info()	task_setup_system_menu()
114	{	{
115	local SHDD="$(echo ${HDD} | sed 's/\/dev\///')"	local mode
116		local retval
	dialog \
	--colors \
	--title "[ Festplatten Partitionierung ]" \
	--backtitle "${TITLE}" \
	--ok-label "Weiter" \
	--msgbox "\nBitte legen Sie 3 Partitionen an.\n\n\
	[ \Z3${SHDD}1\Zn ] Typ: \Z3Linux\Zn mit ca. 50MB\n\
	[ \Z3${SHDD}2\Zn ] Typ: \Z3Linux Swap\Zn mit ca. 256MB\n\
	[ \Z3${SHDD}3\Zn ] Typ: \Z3Linux \Zn mit dem Rest (min. 256MB)\n\n\
	Bitte ${SHDD}1 als \Z3bootable\Zn markieren." 12 81
	}
	dialog_setup_hdd_info_flash()
	{
	local SHDD="$(echo $HDD | sed 's/\/dev\///')"
	dialog \
	--colors \
	--title "[ Festplatten Partitionierung ]" \
	--backtitle "${TITLE}" \
	--ok-label "Weiter" \
	--msgbox "\nBitte legen Sie 1 Partition an.\n\n\
	[ \Z3${SHDD}1\Zn ] Typ: \Z3Linux\Zn mit dem gesamten Speicher\n\
	Bitte ${SHDD}1 als \Z3bootable\Zn markieren." 12 81
	}
	dialog_setup_hdd_info_auto()
	{
	local SHDD="$(echo $HDD | sed 's/\/dev\///')"
	dialog \
	--colors \
	--title "[ Festplatten Partitionierung ]" \
	--backtitle "${TITLE}" \
	--ok-label "Weiter" \
	--msgbox "\nAchtung!\n\
	Alle Daten werden von der Disk [ \Z3${HDD}\Zn ] gelöscht!" 12 81
	}
	dialog_setup_system_menu()
	{
	local i
117
118	i=$(dialog \	mode="$(dialog_setup_system_menu)"
119	--backtitle "${TITLE}" \	retval=$?
120	--title "[ Festplatten Partitionierung ]" \	[[ ${retval} -eq 1 ]] && return 1
121	--cancel-label "Abbrechen" \	if [[ ${retval} -eq 0 ]]
	--ok-label "Weiter" \
	--stdout \
	--colors \
	--menu "\nWaehlen Sie die Installations-Methode" 14 70 5 \
	"1" "Automatisches Setup (Empfohlen)" \
	"" "" \
	"" "\Z1Experten Modi:\Zn" \
	"2" "Normale IDE-Disk (Manuell)" \
	"3" "Flash-Speicher (Manuell)")
	RES=$?
	[[ ${RES} -eq 1 ]] && return 1
	if [[ ${RES} -eq 0 ]]
122	then	then
123	case "${i}" in	case "${mode}" in
124	"1") run_install_auto ;;	"1") run_install_auto ;;
125	"2") run_install_normal ;;	"2") run_install_normal ;;
126	"3") run_install_flash ;;	"") task_setup_system_menu;;
	"") dialog_setup_system_menu;;
127	esac	esac
128	fi	fi
129	}	}
130
131	dialog_hardware_detection()	dialog_hardware_detection()
132	{	{
133	local i	local message
	local hwtmp
	if [ -x $(which mktemp &> /dev/null) ]
	then
	hwtmp="$(mktemp)"
	else
	hwtmp="/tmp/hwtmp.sh"
	fi
134
135	[[ ! -z ${installdevs} ]] && installdevs=""	run_hardware_detection_disks
136
137	echo "dialog \\"  > ${hwtmp}	message+=$"Harddrives:\n"
	echo "--backtitle \"${TITLE}\" \\" >> ${hwtmp}
	echo "--ok-label \"Weiter\" \\" >> ${hwtmp}
	echo "--stdout \\" >> ${hwtmp}
	echo "--colors \\" >> ${hwtmp}
	echo "--msgbox \"Gefundene Hardware:\n\n \\" >> ${hwtmp}
	echo " Festplatten:\n \\" >> ${hwtmp}
138
139	if [[ ! -z ${scsidisks} ]]	if [[ ! -z ${ALL_DISKS} ]]
140	then	then
141	for i in ${scsidisks}	for i in ${ALL_DISKS}
142	do	do
143	if [[ ${i} != ${cdromdev} ]]	message+="\Z3${i}\Zn "
	then
	echo " \\Z7SCSI: \\Z3${i}\\Zn\n \\" >> ${hwtmp}
	installdevs="${installdevs} ${i}"
	fi
144	done	done
145		message+="\n"
146	fi	fi
147
148	if [[ ! -z ${idedisks} ]]	if [[ ! -z ${ALL_CDROMS} ]]
149	then	then
150	for i in ${idedisks}	message+="\n"
151		message+=$"Optical disk drives:\n"
152		for i in ${ALL_CDROMS}
153	do	do
154	if [[ ${i} != ${cdromdev} ]]	message+="\Z3${i}\Zn"
	then
	echo " \\Z7IDE:  \\Z3${i}\\Zn\n \\" >> ${hwtmp}
	installdevs="${installdevs} ${i}"
	fi
155	done	done
156	fi	message+="\n"
	if [[ ! -z ${cdromdev} ]]
	then
	echo " \n \\" >> ${hwtmp}
	echo " \\Z7andere Laufwerke:\n \\" >> ${hwtmp}
	echo " CDROM: \\Z3${cdromdev}\\Zn\n \\" >> ${hwtmp}
157	fi	fi
158
159	# other devices	# other devices
160	run_hardware_detection	run_hardware_detection
161	case "${SPECIALDEVICE}" in	case "${SPECIALDEVICE}" in
162	zotac*) echo " \n\n\n \\Z2Zotac Device erkannt.\\Zn \\" >> ${hwtmp} ;;	zotac*) message+=$"\n\Z2Zotac device detected.\Zn" ;;
163	rangee) echo " \n\n\n \\Z2Rangee Device erkannt.\\Zn \\" >> ${hwtmp} ;;	rangee) message+=$"\n\Z2Rangee device detected.\Zn" ;;
164	maxdata) echo " \n\n\n \\Z2Maxdata Device erkannt.\\Zn \\" >> ${hwtmp} ;;	maxdata) message+=$"\n\Z2Maxdata device detected.\Zn" ;;
165	*) echo " \n\n\n \\ZnStandard Device erkannt.\\Zn \\" >> ${hwtmp} ;;	*) message+=$"\n\ZnCommon device detected.\Zn" ;;
166	esac	esac
167	if [[ ${FORMFACTOR} = laptop ]]	if [[ ${FORMFACTOR} = laptop ]]
168	then	then
169	echo " \n \\ZnFormfactor Laptop, Powersave Modus 'ondemand' wird aktiviert.\\Zn \\" >> ${hwtmp}	message+=$"\n\ZnFormfactor Laptop, activating 'ondemand' powersaving mode.\Zn"
170	fi	fi
171
172	echo " \" 14 70" >> ${hwtmp}	messagebox -y 12 -h $"Detected hardware:" "${message}"
	chmod a+x ${hwtmp}
	${hwtmp}
	# remove tmp file
	if [[ -f ${hwtmp} ]]
	then
	rm ${hwtmp}
	fi
173	}	}
174
175	dialog_setup_hdd_partitions_manuell()	dialog_setup_hdd_partitions_manual()
176	{	{
177	local i	local i
178		local retval
179
180	if [[ -z ${installdevs} ]]	if [[ -z ${ALL_DISKS} ]]
181	then	then
182	dialog \	dialog_no_harddrive_found
	--backtitle "${TITLE}" \
	--ok-label "Beenden" \
	--msgbox "Kein geeignetes Laufwerk gefunden.\nDie Installation ist fehlgeschlagen." 6 70
183	exit 1	exit 1
184	else	else
185		HDD=$(dialog_select_target_harddrive)
186	echo "dialog \\" > /tmp/hddtmp.sh	retval=$?
187	echo "--backtitle \"${TITLE}\" \\" >> /tmp/hddtmp.sh	[[ ${retval} -eq 1 ]] && return 1
188	echo "--ok-label \"Weiter\" \\" >> /tmp/hddtmp.sh	if [[ ${retval} -eq 0 ]]
	echo "--cancel-label \"Beenden\" \\" >> /tmp/hddtmp.sh
	echo "--stdout \\" >> /tmp/hddtmp.sh
	echo "--menu \"Installations Laufwerk auswaehlen:\" 10 70 3 \\" >> /tmp/hddtmp.sh
	for i in ${installdevs}
	do
	echo "\"${i}\" \"\" \\" >> /tmp/hddtmp.sh
	done
	echo -e "\n" >> /tmp/hddtmp.sh
	chmod a+x /tmp/hddtmp.sh
	HDD="$(/tmp/hddtmp.sh)"
	RES=$?
	[[ ${RES} -eq 1 ]] && return 1
	if [[ ${RES} -eq 0 ]]
189	then	then
190	dialog_setup_hdd_info	dialog_setup_hdd_info
191	setup_hdd_partitions_manuell	setup_hdd_partitions_manual
	fi
	fi
	}
	dialog_setup_hdd_partitions_manuell_flash()
	{
	local i
	if [[ -z ${installdevs} ]]
	then
	dialog \
	--backtitle "${TITLE}" \
	--ok-label "Beenden" \
	--msgbox "Kein geeignetes Laufwerk gefunden.\nDie Installation ist fehlgeschlagen." 6 70
	exit 1
	else
	echo "dialog \\" > /tmp/hddtmp.sh
	echo "--backtitle \"${TITLE}\" \\" >> /tmp/hddtmp.sh
	echo "--ok-label \"Weiter\" \\" >> /tmp/hddtmp.sh
	echo "--cancel-label \"Beenden\" \\" >> /tmp/hddtmp.sh
	echo "--stdout \\" >> /tmp/hddtmp.sh
	echo "--menu \"Installations Laufwerk auswaehlen:\" 10 70 3 \\" >> /tmp/hddtmp.sh
	for i in ${installdevs}
	do
	echo "\"${i}\" \"\" \\" >> /tmp/hddtmp.sh
	done
	echo -e "\n" >> /tmp/hddtmp.sh
	chmod a+x /tmp/hddtmp.sh
	HDD="$(/tmp/hddtmp.sh)"
	RES=$?
	[[ ${RES} -eq 1 ]] && return 1
	if [[ ${RES} -eq 0 ]]
	then
	dialog_setup_hdd_info_flash
	setup_hdd_partitions_manuell_flash
192	fi	fi
193	fi	fi
194	}	}
#	Line 303  dialog_setup_hdd_partitions_manuell_flas	Line 196  dialog_setup_hdd_partitions_manuell_flas
196	dialog_setup_hdd_partitions_auto()	dialog_setup_hdd_partitions_auto()
197	{	{
198	local i	local i
199		local retval
200
201	if [[ -z ${installdevs} ]]	if [[ -z ${ALL_DISKS} ]]
202	then	then
203	dialog \	dialog_no_harddrive_found
	--backtitle "${TITLE}" \
	--ok-label "Beenden" \
	--msgbox "Kein geeignetes Laufwerk gefunden.\nDie Installation ist fehlgeschlagen." 6 70
204	exit 1	exit 1
205	else	else
206		HDD=$(dialog_select_target_harddrive)
207	echo "dialog \\" > /tmp/hddtmp.sh	retval=$?
208	echo "--backtitle \"${TITLE}\" \\" >> /tmp/hddtmp.sh	[[ ${retval} -eq 1 ]] && return 1
209	echo "--ok-label \"Weiter\" \\" >> /tmp/hddtmp.sh	if [[ ${retval} -eq 0 ]]
	echo "--cancel-label \"Beenden\" \\" >> /tmp/hddtmp.sh
	echo "--stdout \\" >> /tmp/hddtmp.sh
	echo "--menu \"Installations Laufwerk auswaehlen:\" 10 70 3 \\" >> /tmp/hddtmp.sh
	for i in ${installdevs}
	do
	echo "\"${i}\" \"\" \\" >> /tmp/hddtmp.sh
	done
	echo -e "\n" >> /tmp/hddtmp.sh
	chmod a+x /tmp/hddtmp.sh
	HDD="$(/tmp/hddtmp.sh)"
	RES=$?
	[[ ${RES} -eq 1 ]] && return 1
	if [[ ${RES} -eq 0 ]]
210	then	then
211	dialog_setup_hdd_info_auto	dialog_setup_hdd_info_auto
212	dialog_setup_hdd_create_partitions	dialog_setup_hdd_create_partitions
#	Line 339  dialog_setup_hdd_partitions_auto()	Line 215  dialog_setup_hdd_partitions_auto()
215	fi	fi
216	}	}
217
218	dialog_setup_hdd_create_partitions()	install_meter()
	{
	dialog \
	--backtitle "${TITLE}" \
	--infobox "Erstelle Disk Partitionen ..." 3 70
	}
	dialog_setup_hdd_format()
	{
	dialog \
	--backtitle "${TITLE}" \
	--infobox "Erstelle Datei-Systeme ..." 3 70
	}
	dialog_install_settings()
	{
	dialog \
	--backtitle "${TITLE}" \
	--infobox "Speichere System-Einstellungen ..." 3 70
	}
	dialog_install_system_image()
	{
	dialog \
	--backtitle "${TITLE}" \
	--gauge "Kopiere System-Image ..." 6 80
	}
	dialog_install_meter()
219	{	{
220	while [[ ${CURRENTLINE} != ${TOTALLINES} ]]	while [[ ${CURRENTLINE} != ${TOTALLINES} ]]
221	do	do
#	Line 380  dialog_install_meter()	Line 228  dialog_install_meter()
228	return 0	return 0
229	}	}
230
	dialog_install_bootsector()
	{
	dialog \
	--backtitle "${TITLE}" \
	--infobox "Schreibe den Bootsektor ..." 3 70
	}
	dialog_install_successful()
	{
	dialog \
	--backtitle "${TITLE}" \
	--colors \
	--msgbox "Die Installation war \Z2erfolgreich\Zn." 5 81
	}
	dialog_install_failure()
	{
	dialog \
	--backtitle "${TITLE}" \
	--colors \
	--msgbox "Die Installation ist \Z1Fehlgeschlagen\Zn.\n\n\
	Fehler bei ${ERROR}, RetVal: ${RETVAL} \
	" 10 81
	}
231	dialog_main()	dialog_main()
232	{	{
233	METHOD=0	local method=0
234		local retval
235
236	while [[ ${METHOD} -le 2 ]]	while [[ ${method} -le 2 ]]
237	do	do
238	METHOD=$(dialog \	method=$(CANCEL_LABEL=$"Exit" menubox $"Configuration:" \
239	--backtitle "${TITLE}" \	$"1:Install system" \
240	--no-cancel \	$"2:Show detected harddrives" \
241	--ok-label "Weiter" \	$"3:Exit and reboot" \
242	--stdout \	$"4:Exit and drop into a shell")
243	--menu "Konfiguration" 14 70 5 \	retval=$?
244	"1" "AutoSta_LX installieren" \	[[ ${retval} -eq 1 ]] && exit 1
245	"2" "Uebersicht gefundener Laufwerke" \	if [[ ${retval} -eq 0 ]]
	"3" "Beenden und neustarten" \
	"4" "Beenden und eine Shell starten")
	RES=$?
	[[ ${RES} -eq 1 ]] && exit 1
	if [[ ${RES} -eq 0 ]]
246	then	then
247	case ${METHOD} in	case ${method} in
248	"1") dialog_setup_system_menu ;;	"1") task_setup_system_menu ;;
249	"2") dialog_hardware_detection ;;	"2") dialog_hardware_detection ;;
250	"3") install_do_reboot ;;	"3") install_do_reboot ;;
251	"4") /bin/bash --login -i ;;	"4") /bin/bash --login -i ;;
#	Line 445  run_hardware_detection()	Line 263  run_hardware_detection()
263
264	hwinfo="$(hwinfo --bios --storage --pci --gfxcard --sys)"	hwinfo="$(hwinfo --bios --storage --pci --gfxcard --sys)"
265
266	# check for special devices/clients:	## check for special devices/clients:
267	# if zotac a zotac and the disk is a removeable device, then add rootdelay to kernelcmd	## if zotac a zotac and the disk is a removeable device, then add rootdelay to kernelcmd
268	local removable=0	#local removable=0
269	if [[ ! -z $(echo "${hwinfo}" | grep -i zotac) ]]	#if [[ ! -z $(echo "${hwinfo}" | grep -i zotac) ]]
270	then	#then
271	for i in /sys/block/[hs]d*/removable	#for i in /sys/block/[hs]d*/removable
272	do	#do
273	if [[ $(< ${i}) = 1 ]]	#if [[ $(< ${i}) = 1 ]]
274	then	#then
275	removable=1	#removable=1
276	fi	#fi
277	done	#done
278		## smartcard = udevadm info -n /dev/sda -a | grep -i 'configuration.*card'
279	# only add this for grub legacy, grub2 detect these settings on its own
280	export GRUBLEGACYOPTS="rootdelay=8"	## only add this for grub legacy, grub2 detect these settings on its own
281	# there are to zotac types in the wild, nvidia based gfx and intel	#export GRUBLEGACYOPTS="rootdelay=8"
282	if [[ ! -z $(echo "${hwinfo}" | grep -i nouveau) ]]	## there are to zotac types in the wild, nvidia based gfx and intel
283	then	#if [[ ! -z $(echo "${hwinfo}" | grep -i nouveau) ]]
284	export SPECIALDEVICE="zotac_nvidia"	#then
285	else	#export SPECIALDEVICE="zotac_nvidia"
286	export SPECIALDEVICE="zotac_intel"	#else
287	fi	#export SPECIALDEVICE="zotac_intel"
288	fi	#fi
289		#fi
290
291	# check for special devices/clients:	# check for special devices/clients:
292	# if a rangee and disk ist smaller then 256mb move partion one block further ahead	# if a rangee and disk ist smaller then 256mb move partion one block further ahead
#	Line 496  run_hardware_detection()	Line 315  run_hardware_detection()
315	fi	fi
316	}	}
317
318		run_hardware_detection_disks()
319		{
320		local bootdev
321
322		# all disks but exclude ramdisks
323		export ALL_DISKS=$(get_hwinfo disk | sed '/\/dev\/ram[0-9].*/d')
324		# remove the boot device from ALL_DISKS if it was an usbstick
325		if [[ $(grep '[[:space:]]/mnt/cdrom[[:space:]]' /proc/mounts | cut -d' ' -f3) != iso9660 ]]
326		then
327		bootdev="$(grep '[[:space:]]/mnt/cdrom[[:space:]]' /proc/mounts | cut -d' ' -f1 | sed 's:[0-9]::g')"
328		export ALL_DISKS=$(echo "${ALL_DISKS}" | grep -v "${bootdev}")
329		fi
330		export ALL_CDROMS="$(get_hwinfo cdrom)"
331		}
332
333	hdd_size_below_256mb()	hdd_size_below_256mb()
334	{	{
335	local hdd="$1"	local hdd="$1"
336	local size	local size
337	local retval	local retval
338	[[ -z ${hdd} ]] && die "Error: get_hdd_size() no \$hdd given!"	[[ -z ${hdd} ]] && dialog_die "Error: get_hdd_size() no \$hdd given!"
339
340	size=$(fdisk -l ${hdd} | grep "Disk.*${hdd}" | sed 's:.*,\ \(.*\)\ byte.*:\1:')	size=$(fdisk -l ${hdd} | grep "Disk.*${hdd}" | sed 's:.*,\ \(.*\)\ byte.*:\1:')
341	if [[ ${size} -le 257000000 ]]	if [[ ${size} -le 257000000 ]]
#	Line 518  setup_hdd_partitions_auto()	Line 352  setup_hdd_partitions_auto()
352	{	{
353	ROOTHDD="${HDD}1"	ROOTHDD="${HDD}1"
354
355		# sanity check - should not happen
356		if is_mounted --device "${ROOTHDD}"
357		then
358		echo "partition: device ${ROOTHDD} is already mounted, umount it" >&2
359		umount "${ROOTHDD}"
360		fi
361
362	# run this only if FDISKPARTITIONBELOW256MB is not already 1	# run this only if FDISKPARTITIONBELOW256MB is not already 1
363	if [[ ${FDISKPARTIONBELOW256MB} != 1 ]]	if [[ ${FDISKPARTIONBELOW256MB} != 1 ]]
364	then	then
#	Line 530  setup_hdd_partitions_auto()	Line 371  setup_hdd_partitions_auto()
371	fi	fi
372
373	## delete disk	## delete disk
374	dd if=/dev/zero of=${HDD} count=1 &> /dev/null || die	dd if=/dev/zero of=${HDD} count=1 &> /dev/null || dialog_die
375
376	if [[ ${FDISKPARTIONBELOW256MB} = 1 ]]	if [[ ${FDISKPARTIONBELOW256MB} = 1 ]]
377	then	then
#	Line 576  EOF	Line 417  EOF
417	fi	fi
418	}	}
419
420	setup_hdd_partitions_manuell()	setup_hdd_partitions_manual()
	{
	BOOTHDD="${HDD}1"
	SWAPHDD="${HDD}2"
	ROOTHDD="${HDD}3"
	## hdds partitionieren manuell
	cfdisk ${HDD} || die
	}
	setup_hdd_partitions_manuell_flash()
421	{	{
422	ROOTHDD="${HDD}1"	ROOTHDD="${HDD}1"
423		SWAPHDD=""
424	## hdds partitionieren manuell	BOOTHDD=""
425	cfdisk ${HDD} || die	cfdisk ${HDD} || dialog_die
426	}	}
427
428	setup_hdd_format()	setup_hdd_format()
429	{	{
430	mkswap ${SWAPHDD} || die	# sanity check - should not happen
431	mke2fs -j -q ${BOOTHDD} || die	if is_mounted --device "${ROOTHDD}"
432	mke2fs -j -q ${ROOTHDD} || die	then
433	}	echo "format: device ${ROOTHDD} is already mounted, umount it" >&2
434		umount "${ROOTHDD}"
435		fi
436
437	setup_hdd_format_flash()	mkfs."${FORMAT_FILESYSTEM}" -q "${ROOTHDD}" || dialog_die
	{
	mke2fs -j -q ${ROOTHDD} || die
438	}	}
439
440	install_mount_rootfs()	install_mount_rootfs()
441	{	{
442	swapon ${SWAPHDD} || die	is_mounted --location "${INSTALLROOT}" || mount "${ROOTHDD}" "${INSTALLROOT}"
443	mount ${ROOTHDD} ${INSTALLPATH} || die	install -d ${INSTALLROOT}/boot || dialog_die
	install -d ${INSTALLPATH}/boot || die
	mount ${BOOTHDD} ${INSTALLPATH}/boot || die
	cd ${INSTALLPATH} || die
	}
	install_mount_rootfs_flash()
	{
	mount ${ROOTHDD} ${INSTALLPATH} || die
	install -d ${INSTALLPATH}/boot || die
	cd ${INSTALLPATH} || die
444	}	}
445
446	install_system_image()	install_system_image()
447	{	{
448	tar xvjpf ${CDPATH}/system/${CDIMAGENAME} -C ${INSTALLPATH}	pushd ${INSTALLROOT} > /dev/null
449		tar xvjpf ${CDROOT}/system/${CDIMAGENAME} -C ${INSTALLROOT}
450		popd > /dev/null
451	}	}
452
453	install_bootsector_chroot()	disabled_install_bootsector_chroot()
454	{	{
455	local my_roothdd	local my_roothdd
456	local grubconf=${INSTALLPATH}/boot/grub/grub.conf	local grubconf="${INSTALLROOT}/boot/grub/grub.conf"
457	local grub2conf=/boot/grub/grub.cfg	local grub2conf="/boot/grub/grub.cfg"
458
459	# check for grub2	# check for grub2
460	if [[ -f ${INSTALLPATH}/sbin/grub-mkconfig ]]	if [[ -f ${INSTALLROOT}/sbin/grub-mkconfig ]]
461	then	then
462	# needed by grub-mkconfig on the first run	# needed by grub-mkconfig on the first run
463	if [[ ! -f ${INSTALLPATH}/boot/grub/video.lst ]]	if [[ ! -f ${INSTALLROOT}/boot/grub/video.lst ]]
464	then	then
465	install -m0644 ${INSTALLPATH}/lib/grub/*/video.lst ${INSTALLPATH}/boot/grub/video.lst || die	install -m0644 ${INSTALLROOT}/lib/grub/*/video.lst ${INSTALLROOT}/boot/grub/video.lst || dialog_die
466	fi	fi
467
468	# set kernelopts	# set kernelopts
469	if [[ -f ${INSTALLPATH}/etc/conf.d/grub ]]	if [[ -f ${INSTALLROOT}/etc/conf.d/grub ]]
470	then	then
471	sed -i "s:^\(export GRUB_CMDLINE_LINUX_DEFAULT=\).*:\1\"${KERNELOPTS}\":" ${INSTALLPATH}/etc/conf.d/grub || die	sed -i "s:^\(export GRUB_CMDLINE_LINUX_DEFAULT=\).*:\1\"${KERNELOPTS}\":" ${INSTALLROOT}/etc/conf.d/grub || dialog_die
472	else	else
473	echo "export GRUB_CMDLINE_LINUX_DEFAULT=\"${KERNELOPTS}\"" >  ${INSTALLPATH}/etc/conf.d/grub || die	CONFIG="${INSTALLROOT}/etc/conf.d/grub"
474	fi	clearconfig
475	echo 'grub-mkdevicemap' > ${INSTALLPATH}/root/.installrc || die	addconfig "export GRUB_CMDLINE_LINUX_DEFAULT=\"${KERNELOPTS}\""
476	echo "LC_ALL=C grub-mkconfig -o ${grub2conf}  &> /dev/null" >> ${INSTALLPATH}/root/.installrc || die	fi
477	echo "grub-install --no-floppy ${HDD} &> /dev/null" >> ${INSTALLPATH}/root/.installrc || die	CONFIG="${INSTALLROOT}/root/.installrc"
478	echo "exit 0" >> ${INSTALLPATH}/root/.installrc || die	clearconfig
479		# only grub 1.99
480		addconfig 'type -P grub-mkdevicemap && grub-mkdevicemap'
481		addconfig "grub-install --no-floppy ${HDD} &> /dev/null"
482		addconfig "LC_ALL=C grub-mkconfig -o ${grub2conf}  &> /dev/null"
483		addconfig "exit 0"
484
485	# grub-legacy	# grub-legacy
486	else	else
487	### grubconf schreiben	source ${INSTALLROOT}/boot/kernelversion
	source ${INSTALLPATH}/boot/kernelversion
488
489	#for alx only	if [ -e ${INSTALLROOT}/etc/alx_version ]
	if [ -e ${INSTALLPATH}/etc/alx_version ]
490	then	then
491	OLD_ALXVER="${ALXVER}"	OLD_ALXVER="${ALXVER}"
492	source ${INSTALLPATH}/etc/alx_version	source ${INSTALLROOT}/etc/alx_version
493	KRNVER="ALX-${ALXVER}"	KRNVER="ALX-${ALXVER}"
494	ALXVER="${OLD_ALXVER}"	ALXVER="${OLD_ALXVER}"
495	fi	fi
#	Line 673  install_bootsector_chroot()	Line 499  install_bootsector_chroot()
499	[[ -z ${KRNIMG} ]] && KRNIMG="vmlinuz"	[[ -z ${KRNIMG} ]] && KRNIMG="vmlinuz"
500
501	# uuid support	# uuid support
502	if is_uuid_supported	my_roothdd="UUID=$(get_uuid ${ROOTHDD})"
	then
	my_roothdd="UUID=$(get_uuid ${ROOTHDD})"
	else
	my_roothdd="${ROOTHDD}"
	fi
503
504	: > ${grubconf} || die	CONFIG="${grubconf}"
505	echo "default 0" >> ${grubconf} || die	clearconfig
506	echo "timeout 3" >> ${grubconf} || die	addconfig "default 0"
507		addconfig "timeout 3"
508	# using current root password	# using current root password
509	echo "password --md5 $(cat ${INSTALLPATH}/etc/shadow | grep root | cut -d: -f2)"  >> ${grubconf} || die	addconfig "password --md5 $(cat ${INSTALLROOT}/etc/shadow | grep root | cut -d: -f2)"
510
511	echo  >> ${grubconf} || die	addconfig
512	echo "# normal boot" >> ${grubconf} || die	addconfig "# normal boot"
513	echo "title ${KRNVER}" >> ${grubconf} || die	addconfig "title ${KRNVER}"
514	echo "root (hd0,0)" >> ${grubconf} || die	addconfig "root (hd0,0)"
515	echo "kernel /boot/${KRNIMG} root=${my_roothdd} ${KERNELOPTS} ${GRUBLEGACYOPTS}" >> ${grubconf} || die	addconfig "kernel /boot/${KRNIMG} root=${my_roothdd} ${KERNELOPTS} ${GRUBLEGACYOPTS}"
516	if is_initrd_supported	if is_initrd_supported
517	then	then
518	echo "initrd /boot/${KRNINITRD}" >> ${grubconf} || die	addconfig "initrd /boot/${KRNINITRD}"
519	fi	fi
520
521	echo >> ${grubconf} || die	addconfig
522	echo "# admin boot" >> ${grubconf} || die	addconfig "# admin boot"
523	echo "title ${KRNVER} - Re-run hardware-detection" >> ${grubconf} || die	addconfig "title ${KRNVER} - Re-run hardware-detection"
524	echo "lock"  >> ${grubconf} || die	addconfig "lock"
525	echo "root (hd0,0)" >> ${grubconf} || die	addconfig "root (hd0,0)"
526	echo "kernel /boot/${KRNIMG} root=${my_roothdd} ${KERNELOPTS} ${GRUBLEGACYOPTS} hardware-auto-detection" >> ${grubconf} || die	addconfig "kernel /boot/${KRNIMG} root=${my_roothdd} ${KERNELOPTS} ${GRUBLEGACYOPTS} hardware-auto-detection"
527	if is_initrd_supported	if is_initrd_supported
528	then	then
529	echo "initrd /boot/${KRNINITRD}" >> ${grubconf} || die	addconfig "initrd /boot/${KRNINITRD}"
530	fi	fi
531
532	echo >> ${grubconf} || die	addconfig
533	echo "title ${KRNVER} - Reset *all* local settings" >> ${grubconf} || die	addconfig "title ${KRNVER} - Reset *all* local settings"
534	echo "lock"  >> ${grubconf} || die	addconfig "lock"
535	echo "root (hd0,0)" >> ${grubconf} || die	addconfig "root (hd0,0)"
536	echo "kernel /boot/${KRNIMG} root=${my_roothdd} ${KERNELOPTS} ${GRUBLEGACYOPTS} alx-reset-settings" >> ${grubconf} || die	addconfig "kernel /boot/${KRNIMG} root=${my_roothdd} ${KERNELOPTS} ${GRUBLEGACYOPTS} alx-reset-settings"
537	if is_initrd_supported	if is_initrd_supported
538	then	then
539	echo "initrd /boot/${KRNINITRD}" >> ${grubconf} || die	addconfig "initrd /boot/${KRNINITRD}"
540	fi	fi
541
542	# bootsector schreiben chrooted schreiben (lfs/magellan)	# bootsector schreiben chrooted schreiben (lfs/magellan)
543	cat > ${INSTALLPATH}/root/.installrc << CHROOTEOF	cat > ${INSTALLROOT}/root/.installrc << CHROOTEOF
544	/usr/sbin/grub --no-floppy --batch << "EOF" 1> /dev/null 2> /dev/null	/usr/sbin/grub --no-floppy --batch << "EOF" 1> /dev/null 2> /dev/null
545	root (hd0,0)	root (hd0,0)
546	setup (hd0)	setup (hd0)
#	Line 728  exit 0	Line 550  exit 0
550	CHROOTEOF	CHROOTEOF
551	fi	fi
552
553	## enters chroot	# run installrc
554	mount -t proc proc ${INSTALLPATH}/proc	chrooted /bin/bash --rcfile /root/.installrc -i
555	mount -t sysfs sysfs ${INSTALLPATH}/sys	rm ${INSTALLROOT}/root/.installrc
	mount -o bind /dev ${INSTALLPATH}/dev
	chroot ${INSTALLPATH} /bin/bash --rcfile /root/.installrc -i
	umount ${INSTALLPATH}/proc
	umount ${INSTALLPATH}/sys
	umount ${INSTALLPATH}/dev
	rm ${INSTALLPATH}/root/.installrc
	}
	is_initrd_supported()
	{
	# only generate initrds if the cmd exists
	[[ -x ${INSTALLPATH}/sbin/mkinitrd ]] && return 0
	return 1
556	}	}
557
558	install_initrd_chroot()	disabled_install_initrd_chroot()
559	{	{
560	# only generate initrds if the cmd exists	# only generate initrds if the cmd exists
561	is_initrd_supported || return 0	is_initrd_supported || return 0
#	Line 773  install_initrd_chroot()	Line 582  install_initrd_chroot()
582	fi	fi
583
584	# install an appropriate uvesafb.conf	# install an appropriate uvesafb.conf
585	install -d ${INSTALLPATH}/etc/modprobe.d || die	install -d ${INSTALLROOT}/etc/modprobe.d || dialog_die
586	echo "options uvesafb mode_option=1024x768-32@60 scroll=ywrap" > ${INSTALLPATH}/etc/modprobe.d/uvesafb.conf || die	CONFIG="${INSTALLROOT}/etc/modprobe.d/uvesafb.conf"
587		clearconfig
588		addconfig "options uvesafb mode_option=1024x768-32@60 scroll=ywrap"
589
590	# install an appropriate viafb.conf	# install an appropriate viafb.conf
591	echo "options viafb viafb_mode=1024x768 viafb_refresh=60" > ${INSTALLPATH}/etc/modprobe.d/viafb.conf || die	CONFIG="${INSTALLROOT}/etc/modprobe.d/viafb.conf"
592		clearconfig
593		addconfig "options viafb viafb_mode=1024x768 viafb_refresh=60"
594
595	# install an appropriate i810fb.conf	# install an appropriate i810fb.conf
596	echo "options i810fb xres=1024 yres=768 bpp=16 mtrr=1 hsync1=30 hsync2=62 vsync1=30 vsync2=60"  > ${INSTALLPATH}/etc/modprobe.d/i810fb.conf || die	CONFIG="${INSTALLROOT}/etc/modprobe.d/i810fb.conf"
597		clearconfig
598		addconfig "options i810fb xres=1024 yres=768 bpp=16 mtrr=1 hsync1=30 hsync2=62 vsync1=30 vsync2=60"
599
600	cat > ${INSTALLPATH}/root/.installrc << CHROOTEOF	cat > ${INSTALLROOT}/root/.installrc << CHROOTEOF
601	echo "MODULES=\"${FORMAT_FILESYSTEM} ${DISKMODS} ${OLDATAMODS} ${PATAMODS} ${SATAMODS} ${DRMMODS} ${FBMODS} ${OTHERMODS}\"" > /etc/conf.d/mkinitrd	echo "MODULES=\"${FORMAT_FILESYSTEM} ${DISKMODS} ${OLDATAMODS} ${PATAMODS} ${SATAMODS} ${DRMMODS} ${FBMODS} ${OTHERMODS}\"" > /etc/conf.d/mkinitrd
602	mkinitrd -f /boot/$(readlink /boot/initrd) $(readlink /boot/vmlinuz | sed "s:kernel-::g") > /dev/null	mkinitrd -f /boot/$(readlink /boot/initrd) $(readlink /boot/vmlinuz | sed "s:kernel-::g") > /dev/null
603	exit 0	exit 0
604	CHROOTEOF	CHROOTEOF
605
606	## enters chroot	# run installrc
607	mount -t proc proc ${INSTALLPATH}/proc	chrooted /bin/bash --rcfile /root/.installrc -i
608	mount -t sysfs sysfs ${INSTALLPATH}/sys	rm ${INSTALLROOT}/root/.installrc
	mount -o bind /dev ${INSTALLPATH}/dev
	chroot ${INSTALLPATH} /bin/bash --rcfile /root/.installrc -i
	umount ${INSTALLPATH}/proc
	umount ${INSTALLPATH}/sys
	umount ${INSTALLPATH}/dev
	rm ${INSTALLPATH}/root/.installrc
	}
	is_uuid_supported()
	{
	if [[ -x $(which busybox.mkinitrd &> /dev/null) ]]
	then
	# only detect uuids if supported
	if [[ ! -z $(busybox.mkinitrd | grep blkid) ]]
	then
	return 0
	fi
	fi
	return 1
	}
	get_uuid()
	{
	local UUID
	local SEC_TYPE
	local TYPE
	local dev="$1"
	[[ -z ${dev} ]] && die "no dev given"
	# check if given device is already an UUID
	if [[ ${dev/UUID=/}x != ${dev}x ]]
	then
	eval "${dev}"
	else
	eval $(busybox.mkinitrd blkid ${dev} | grep "${dev}:" | sed 's/.*:\ //')
	fi
	echo "${UUID}"
609	}	}
610
611	install_system_settings()	install_system_settings()
612	{	{
613	# schreibe fstab	local CONFIG
614	if is_uuid_supported
615	then	# write fstab
616	echo -e "UUID=$(get_uuid ${BOOTHDD})\t/boot\t${FORMAT_FILESYSTEM}\tnoatime,noauto\t1 1" > ${INSTALLPATH}/etc/fstab || die	CONFIG="${INSTALLROOT}/etc/fstab"
617	echo -e "UUID=$(get_uuid ${ROOTHDD})\t/\t${FORMAT_FILESYSTEM}\tnoatime\t0 0" >> ${INSTALLPATH}/etc/fstab || die	clearconfig
618	else	addconfig -e "UUID=$(get_uuid ${ROOTHDD})\t/\t${FORMAT_FILESYSTEM}\tnoatime,noauto\t1 1"
619	echo -e "${BOOTHDD}\t/boot\t${FORMAT_FILESYSTEM}\tnoatime,noauto\t1 1" > ${INSTALLPATH}/etc/fstab || die	addconfig -e "proc\t/proc\tproc\tdefaults\t0 0"
620	echo -e "${ROOTHDD}\t/\t${FORMAT_FILESYSTEM}\tnoatime\t0 0" >> ${INSTALLPATH}/etc/fstab || die	addconfig -e "shm\t/dev/shm\ttmpfs\tdefaults\t0 0"
	fi
	# not needed busybox loads all with swapon -a, even if not mentioned in fstab
	#echo -e "UUID='$(get_uuid ${SWAPHDD})'\tswap\tswap\tpri=1\t0 0" >> ${INSTALLPATH}/etc/fstab || die
	echo -e "proc\t/proc\tproc\tdefaults\t0 0" >> ${INSTALLPATH}/etc/fstab || die
	echo -e "shm\t/dev/shm\ttmpfs\tdefaults\t0 0" >> ${INSTALLPATH}/etc/fstab || die
621
622	# install network config skeleton	# install network config skeleton
623	install -m0644 ${INSTALLPATH}/etc/alxconfig-ng/skel/net/net.eth0 ${INSTALLPATH}/etc/conf.d/ || die	CONFIG="${INSTALLROOT}/etc/conf.d/net.eth0"
624		clearconfig
625		addconfig 'ONBOOT="yes"'
626		addconfig 'NETWORKING="dhcp"'
627
628	# intel framebufer quirk	# intel framebuffer quirk
629	if [[ -e /proc/fb ]]	if [ -e ${INSTALLROOT}/etc/splash/splash.conf ]
630	then	then
631	if [[ ! -z $(grep 'inteldrmfb' /proc/fb) ]]	if [ -e /proc/fb ]
632	then	then
633	fbdev=$(grep 'inteldrmfb' /proc/fb | sed 's:\([0-9]\).*:\1:')	if [[ ! -z $(grep 'inteldrmfb' /proc/fb) ]]
	if [[ ${fbdev} != 0 ]]
634	then	then
635	sed -i "s:^\(SPLASH_DEV=\).*:\1\"/dev/fb${fbdev}\":" ${INSTALLPATH}/etc/splash/splash.conf || die	fbdev=$(grep 'inteldrmfb' /proc/fb | sed 's:\([0-9]\).*:\1:')
636		if [[ ${fbdev} != 0 ]]
637		then
638		sed -i "s:^\(SPLASH_DEV=\).*:\1\"/dev/fb${fbdev}\":" ${INSTALLROOT}/etc/splash/splash.conf || dialog_die
639		fi
640	fi	fi
641	fi	fi
642	fi	fi
643	}	}
644
	install_system_settings_flash()
	{
	# schreibe fstab
	if is_uuid_supported
	then
	echo -e "UUID=$(get_uuid ${ROOTHDD})\t/\t${FORMAT_FILESYSTEM}\tnoatime\t0 0" > ${INSTALLPATH}/etc/fstab || die
	else
	echo -e "${ROOTHDD}\t/\t${FORMAT_FILESYSTEM}\tnoatime\t0 0" > ${INSTALLPATH}/etc/fstab || die
	fi
	echo -e "proc\t/proc\tproc\tdefaults\t0 0" >> ${INSTALLPATH}/etc/fstab || die
	echo -e "shm\t/dev/shm\ttmpfs\tdefaults\t0 0" >> ${INSTALLPATH}/etc/fstab || die
	}
645	install_umount_rootfs()	install_umount_rootfs()
646	{	{
647	cd /	is_mounted --location ${INSTALLROOT}/boot && umount ${INSTALLROOT}/boot
648	umount ${INSTALLPATH}/boot || die	is_mounted --location ${INSTALLROOT} && umount ${INSTALLROOT}
	umount ${INSTALLPATH} || die
	swapoff ${SWAPHDD} || die
	}
	install_umount_rootfs_flash()
	{
	cd /
	umount ${INSTALLPATH} || die
649	}	}
650
651	install_do_reboot()	install_do_reboot()
#	Line 905  run_install_normal()	Line 661  run_install_normal()
661	{	{
662	dialog_hardware_detection	dialog_hardware_detection
663
664	dialog_setup_hdd_partitions_manuell	dialog_setup_hdd_partitions_manual
665	dialog_setup_hdd_format	dialog_setup_hdd_format
666	setup_hdd_format > /dev/null	setup_hdd_format > /dev/null
667	install_mount_rootfs	install_mount_rootfs
668	(install_system_image > /tmp/install.log) 2> /tmp/install_errors.log | dialog_install_meter | dialog_install_system_image	(install_system_image > /tmp/install.log) 2> /tmp/install_errors.log | install_meter | dialog_install_system_image
669
670	dialog_install_settings	dialog_install_settings
671	sleep 1	sleep 1
672	install_system_settings	install_system_settings
673	install_initrd_chroot	if is_initrd_supported
674		then
675		dialog_install_initrd
676		initrd_config
677		initrd_install
678		fi
679
680	dialog_install_bootsector	dialog_install_bootsector
681	install_bootsector_chroot	bootloader_config
682		bootloader_install
683
684	install_umount_rootfs	install_umount_rootfs
685	dialog_install_successful	dialog_install_successful
686	}	}
687
	run_install_flash()
	{
	dialog_hardware_detection
	dialog_setup_hdd_partitions_manuell_flash
	dialog_setup_hdd_format
	setup_hdd_format_flash > /dev/null
	install_mount_rootfs_flash
	(install_system_image > /tmp/install.log) 2> /tmp/install_errors.log | dialog_install_meter | dialog_install_system_image
	dialog_install_settings
	sleep 1
	install_system_settings_flash
	install_initrd_chroot
	dialog_install_bootsector
	install_bootsector_chroot
	install_umount_rootfs_flash
	dialog_install_successful
	}
688	run_install_auto()	run_install_auto()
689	{	{
690	dialog_hardware_detection	dialog_hardware_detection
691
692	dialog_setup_hdd_partitions_auto	dialog_setup_hdd_partitions_auto
693	dialog_setup_hdd_format	dialog_setup_hdd_format
694	setup_hdd_format_flash > /dev/null	setup_hdd_format > /dev/null
695	install_mount_rootfs_flash	install_mount_rootfs
696	(install_system_image > /tmp/install.log) 2> /tmp/install_errors.log | dialog_install_meter | dialog_install_system_image	(install_system_image > /tmp/install.log) 2> /tmp/install_errors.log | install_meter | dialog_install_system_image
697
698	dialog_install_settings	dialog_install_settings
699	sleep 1	sleep 1
700	install_system_settings_flash	install_system_settings
701	install_initrd_chroot	if is_initrd_supported
702		then
703		dialog_install_initrd
704		initrd_config
705		initrd_install
706		fi
707
708	dialog_install_bootsector	dialog_install_bootsector
709	install_bootsector_chroot	bootloader_config
710		bootloader_install
711
712	install_umount_rootfs_flash	install_umount_rootfs
713	dialog_install_successful	dialog_install_successful
714	}	}
715
716		# set some proper traps
717		trap "trap_exit" SIGINT SIGQUIT
718
719	dialog_main	dialog_main
720
721	exit 0	exit 0

---

Colored Diff Long Colored Diff Full Colored Diff Unidiff Context Diff Side by Side

Legend: Removed from v.2323   changed lines   Added in v.2475