Annotation of /trunk/magellan-initscripts/rc/network
Parent Directory | Revision Log
Revision 868 -
(hide annotations)
(download)
Wed May 13 18:57:55 2009 UTC (15 years, 4 months ago) by niro
Original Path: trunk/magellan-initscripts/etc/rc.d/init.d/network
File size: 11323 byte(s)
Wed May 13 18:57:55 2009 UTC (15 years, 4 months ago) by niro
Original Path: trunk/magellan-initscripts/etc/rc.d/init.d/network
File size: 11323 byte(s)
-fixed some warnings with wireless extensions enabled - wireless modes (managed, ad-hoc) are working, as the device is not in use because we run "ifconfig $device up" later
1 | niro | 2 | #!/bin/bash |
2 | niro | 781 | # $Header: /home/cvsd/magellan-cvs/magellan-src/magellan-initscripts/etc/rc.d/init.d/network,v 1.19 2008-12-22 22:01:15 niro Exp $ |
3 | niro | 2 | |
4 | #%rlevels: 0:k 1:k 2:k 3:s 4:s 5:s 6:k | ||
5 | #%start: 20 | ||
6 | #%stop: 80 | ||
7 | |||
8 | #deps | ||
9 | #%needs: | ||
10 | #%before: | ||
11 | #%after: | ||
12 | |||
13 | niro | 781 | source /etc/conf.d/rc |
14 | niro | 20 | source ${rc_functions} |
15 | niro | 2 | |
16 | niro | 243 | # read values from files |
17 | read_value() | ||
18 | { | ||
19 | local var="$1" | ||
20 | local file="$2" | ||
21 | local value | ||
22 | |||
23 | # local all possible vars | ||
24 | # global | ||
25 | local ONBOOT | ||
26 | local NETWORKING | ||
27 | niro | 691 | |
28 | niro | 243 | # static |
29 | local IP | ||
30 | local NETMASK | ||
31 | local BROADCAST | ||
32 | local NETWORKING | ||
33 | local FORCE_MAC_TO | ||
34 | |||
35 | # dhcp | ||
36 | local DHCP_PROG | ||
37 | local DHCP_START | ||
38 | local DHCP_STOP | ||
39 | |||
40 | # default gw | ||
41 | local GATEWAY | ||
42 | local GATEWAY_IF | ||
43 | |||
44 | # wireless extensions | ||
45 | local WIRELESS_AP | ||
46 | local WIRELESS_AUTH_MODE | ||
47 | local WIRELESS_BITRATE | ||
48 | local WIRELESS_CHANNEL | ||
49 | local WIRELESS_DEFAULT_KEY | ||
50 | local WIRELESS_ESSID | ||
51 | local WIRELESS_FREQUENCY | ||
52 | local WIRELESS_KEY | ||
53 | local WIRELESS_KEY_ASCII | ||
54 | local WIRELESS_KEY_0 | ||
55 | local WIRELESS_KEY_1 | ||
56 | local WIRELESS_KEY_2 | ||
57 | local WIRELESS_KEY_3 | ||
58 | local WIRELESS_KEY_LENGTH | ||
59 | local WIRELESS_MODE | ||
60 | local WIRELESS_NICK | ||
61 | local WIRELESS_NWID | ||
62 | local WIRELESS_POWER | ||
63 | niro | 636 | local WIRELESS_WPA_DRIVER |
64 | niro | 243 | |
65 | niro | 636 | local BRIDGE_INTERFACES |
66 | local BRIDGE_STP | ||
67 | |||
68 | niro | 243 | source ${file} |
69 | eval value=\$$(echo ${var}) | ||
70 | echo "${value}" | ||
71 | } | ||
72 | |||
73 | checkconfig() | ||
74 | { | ||
75 | niro | 636 | if [[ -z ${NETWORKING} ]] |
76 | niro | 2 | then |
77 | echo "NETWORKING missing in net.${interface}, aborted" | ||
78 | exit 1 | ||
79 | fi | ||
80 | |||
81 | niro | 20 | case "${NETWORKING}" in |
82 | niro | 2 | static) |
83 | niro | 636 | if [[ -z ${IP} ]] |
84 | niro | 2 | then |
85 | echo "IP missing in net.${interface}, aborted" | ||
86 | exit 1 | ||
87 | fi | ||
88 | |||
89 | niro | 636 | if [[ -z ${NETMASK} ]] |
90 | niro | 2 | then |
91 | echo -n "NETMASK missing in net.${interface}, " | ||
92 | echo "using 255.255.255.0" | ||
93 | NETMASK=255.255.255.0 | ||
94 | fi | ||
95 | |||
96 | niro | 636 | if [[ -z ${BROADCAST} ]] |
97 | niro | 2 | then |
98 | echo -n "BROADCAST missing in net.${interface}, " | ||
99 | echo "using default address" | ||
100 | fi | ||
101 | ;; | ||
102 | niro | 20 | |
103 | niro | 2 | dhcp) |
104 | niro | 636 | if [[ -z ${DHCP_PROG} ]] |
105 | niro | 2 | then |
106 | echo "DHCP_PROG missing in net.${interface}, aborted" | ||
107 | exit 1 | ||
108 | fi | ||
109 | ;; | ||
110 | niro | 20 | |
111 | niro | 2 | esac |
112 | } | ||
113 | |||
114 | niro | 243 | # onboot_interface_list /path/to/files* |
115 | onboot_interface_list() | ||
116 | { | ||
117 | local file | ||
118 | local devices | ||
119 | local iface | ||
120 | niro | 2 | |
121 | niro | 243 | # get list of all devices |
122 | for file in $@ | ||
123 | do | ||
124 | if [[ $(read_value ONBOOT ${file}) = yes ]] | ||
125 | then | ||
126 | iface="$(basename ${file} | sed s/net.//)" | ||
127 | niro | 506 | # exclude backup files and exclude net.routes too |
128 | niro | 243 | case "${iface}" in |
129 | niro | 2 | *~) ;; |
130 | niro | 506 | */net.routes) ;; |
131 | niro | 243 | *) devices="${devices} $(basename ${file} | sed s/net.//)" ;; |
132 | esac | ||
133 | fi | ||
134 | done | ||
135 | niro | 181 | |
136 | niro | 243 | echo "${devices}" |
137 | } | ||
138 | niro | 181 | |
139 | niro | 268 | config_wireless_wep() |
140 | { | ||
141 | local iface="$1" | ||
142 | |||
143 | if [[ -z ${iface} ]] | ||
144 | then | ||
145 | echo "WEP: no \$iface given. Aborting setup." | ||
146 | return 1 | ||
147 | fi | ||
148 | |||
149 | niro | 270 | ${CURS_UP} |
150 | ${SET_WWCOL} | ||
151 | echo "[AUTH: WEP]" | ||
152 | |||
153 | niro | 268 | iwconfig "${iface}" enc on |
154 | [[ -n ${WIRELESS_KEY_LENGTH} ]] && iwconfig "${iface}" enc "${WIRELESS_KEY_LENGTH}" | ||
155 | [[ -n ${WIRELESS_KEY} ]] && iwconfig "${iface}" key "${WIRELESS_KEY}" | ||
156 | [[ -n ${WIRELESS_KEY_ASCII} ]] && iwconfig "${iface}" key s:"${WIRELESS_KEY_ASCII}" | ||
157 | } | ||
158 | |||
159 | config_wireless_wpa() | ||
160 | { | ||
161 | local iface="$1" | ||
162 | |||
163 | if [[ -z ${iface} ]] | ||
164 | then | ||
165 | echo "WPA: no \$iface given. Aborting setup." | ||
166 | return 1 | ||
167 | fi | ||
168 | |||
169 | if [ ! -x /sbin/wpa_supplicant ] | ||
170 | then | ||
171 | echo "WPA: wpa_supplicant not installed. Aborting setup." | ||
172 | return 1 | ||
173 | fi | ||
174 | |||
175 | niro | 270 | ${CURS_UP} |
176 | ${SET_WWCOL} | ||
177 | echo "[AUTH: WPA]" | ||
178 | |||
179 | niro | 268 | # get default settings |
180 | [[ -f /etc/conf.d/wpa_supplicant ]] && source /etc/conf.d/wpa_supplicant | ||
181 | |||
182 | # check the configuration | ||
183 | [[ -z ${WIRELESS_WPA_CONFIG} ]] && WIRELESS_WPA_CONFIG=/etc/wpa_supplicant.auto | ||
184 | [[ -z ${WIRELESS_WPA_SKEL} ]] && WIRELESS_WPA_SKEL=/etc/conf.d/wpa_supplicant.skel | ||
185 | if [[ -z ${WIRELESS_WPA_DRIVER} ]] | ||
186 | then | ||
187 | echo "WPA: WIRELESS_WPA_DRIVER given. Aborting setup." | ||
188 | return 1 | ||
189 | fi | ||
190 | |||
191 | # write a config with the settings from net.${iface} | ||
192 | # only wpa-psk ! all other needs manual setup | ||
193 | if [[ ${WIRELESS_WPA_AUTOCONF} = true ]] | ||
194 | then | ||
195 | # write default cfg from skeleton | ||
196 | cat ${WIRELESS_WPA_SKEL} > ${WIRELESS_WPA_CONFIG} | ||
197 | |||
198 | niro | 867 | local wpa_proto |
199 | case ${WIRELESS_AUTH_MODE} in | ||
200 | wpa) wpa_proto="WPA" ;; | ||
201 | wpa2) wpa_proto="WPA2" ;; | ||
202 | esac | ||
203 | |||
204 | niro | 268 | # setup the network entry |
205 | sed -i -e "s:@WIRELESS_ESSID@:${WIRELESS_ESSID}:g" \ | ||
206 | niro | 867 | -e "s:@WIRELESS_KEY@:${WIRELESS_KEY_ASCII}:g" \ |
207 | -e "s:@WIRELESS_AUTH_MODE@:${wpa_proto}:g" \ | ||
208 | niro | 268 | ${WIRELESS_WPA_CONFIG} |
209 | fi | ||
210 | |||
211 | niro | 275 | # remove old state dir |
212 | [ -d /var/run/wpa_supplicant ] && rm -rf /var/run/wpa_supplicant | ||
213 | |||
214 | niro | 268 | # now run the wpa_supplicant dameon |
215 | wpa_supplicant -B \ | ||
216 | -D"${WIRELESS_WPA_DRIVER}" \ | ||
217 | -c"${WIRELESS_WPA_CONFIG}" \ | ||
218 | -i"${iface}" \ | ||
219 | ${WIRELESS_WPA_OPTS} | ||
220 | niro | 270 | |
221 | # echo wait 5 seconds | ||
222 | echo " Waiting 5 seconds to retrieve authentification reply ... " | ||
223 | sleep 5 | ||
224 | niro | 268 | } |
225 | |||
226 | setup_wireless_extensions() | ||
227 | { | ||
228 | local iface="$1" | ||
229 | |||
230 | if [[ -z ${iface} ]] | ||
231 | then | ||
232 | echo "WIRELESS_EXTENSIONS: no \$iface given. Aborting setup." | ||
233 | return 1 | ||
234 | fi | ||
235 | |||
236 | niro | 275 | if [[ -n ${WIRELESS_BITRATE} ]] || |
237 | [[ -n ${WIRELESS_CHANNEL} ]] || | ||
238 | [[ -n ${WIRELESS_ESSID} ]] || | ||
239 | [[ -n ${WIRELESS_FREQUENCY} ]] || | ||
240 | [[ -n ${WIRELESS_MODE} ]] || | ||
241 | [[ -n ${WIRELESS_NICK} ]] || | ||
242 | [[ -n ${WIRELESS_AUTH_MODE} ]] | ||
243 | then | ||
244 | echo -e ${COLOREDSTAR}"Setting up wlan-ext for ${COLBLUE}${iface}${COLDEFAULT} ... " | ||
245 | fi | ||
246 | niro | 270 | |
247 | niro | 268 | [[ -n ${WIRELESS_BITRATE} ]] && iwconfig "${iface}" rate "${WIRELESS_BITRATE}" |
248 | [[ -n ${WIRELESS_CHANNEL} ]] && iwconfig "${iface}" channel "${WIRELESS_CHANNEL}" | ||
249 | [[ -n ${WIRELESS_ESSID} ]] && iwconfig "${iface}" essid "${WIRELESS_ESSID}" | ||
250 | [[ -n ${WIRELESS_FREQUENCY} ]] && iwconfig "${iface}" freq "${WIRELESS_FREQUENCY}" | ||
251 | [[ -n ${WIRELESS_MODE} ]] && iwconfig "${iface}" mode "${WIRELESS_MODE}" | ||
252 | [[ -n ${WIRELESS_NICK} ]] && iwconfig "${iface}" nick "${WIRELESS_NICK}" | ||
253 | |||
254 | case "${WIRELESS_AUTH_MODE}" in | ||
255 | niro | 867 | wpa|wpa2) config_wireless_wpa "${iface}" ;; |
256 | wep|on) config_wireless_wep "${iface}" ;; | ||
257 | off) iwconfig "${iface}" enc off ;; | ||
258 | niro | 268 | esac |
259 | } | ||
260 | |||
261 | niro | 506 | config_bridge_devices() |
262 | { | ||
263 | local iface="$1" | ||
264 | local method="$2" | ||
265 | niro | 636 | local bport |
266 | niro | 506 | |
267 | if [[ -z ${iface} ]] | ||
268 | then | ||
269 | echo "BRIDGE: no \$iface given. Aborting setup." | ||
270 | return 1 | ||
271 | fi | ||
272 | |||
273 | if [[ -z ${method} ]] | ||
274 | then | ||
275 | echo "BRIDGE: no \$method given. Aborting setup." | ||
276 | return 1 | ||
277 | fi | ||
278 | |||
279 | # first check for brctl | ||
280 | if [[ -z $(which brctl) ]] | ||
281 | then | ||
282 | echo "brctl not found! Please install 'net-misc/bridge-utils'." | ||
283 | return 1 | ||
284 | fi | ||
285 | |||
286 | # check the config | ||
287 | niro | 638 | if [[ -z ${BRIDGE_INTERFACES} ]] |
288 | niro | 506 | then |
289 | niro | 638 | echo "BRIDGE: no \$BRIDGE_INTERFACES given. Aborting setup." |
290 | niro | 506 | return 1 |
291 | fi | ||
292 | |||
293 | case ${method} in | ||
294 | add) | ||
295 | # setup the bridge device | ||
296 | brctl addbr ${iface} | ||
297 | niro | 636 | for bport in ${BRIDGE_INTERFACES} |
298 | do | ||
299 | # enter promiscous mode | ||
300 | ifconfig ${bport} 0.0.0.0 promisc | ||
301 | # now setup the bridge | ||
302 | brctl addif ${iface} ${bport} | ||
303 | done | ||
304 | # enable spanning-tree protocol | ||
305 | niro | 640 | case ${BRIDGE_STP} in |
306 | niro | 636 | on|off) brctl stp ${iface} ${BRIDGE_STP} ;; |
307 | *) echo "BRIDGE: unkown value \$BRIDGE_STP='$BRIDGE_STP'."; return 1 ;; | ||
308 | esac | ||
309 | niro | 506 | ;; |
310 | niro | 636 | |
311 | niro | 506 | remove) |
312 | niro | 636 | for bport in ${BRIDGE_INTERFACE} |
313 | do | ||
314 | # bring the interface down | ||
315 | ifconfig ${bport} down | ||
316 | # remove the interface from the bridge | ||
317 | brctl delif ${iface} ${bport} | ||
318 | done | ||
319 | niro | 506 | # bring the bridge down |
320 | brctl delbr ${iface} | ||
321 | ;; | ||
322 | esac | ||
323 | niro | 636 | |
324 | niro | 506 | # unset the bridge variable to be safe |
325 | niro | 636 | unset BRIDGE_INTERFACES |
326 | niro | 506 | # continue to setup generic networking |
327 | } | ||
328 | |||
329 | config_routes() | ||
330 | { | ||
331 | local method="$1" | ||
332 | local message | ||
333 | |||
334 | # only add and del are allowed | ||
335 | case ${method} in | ||
336 | add) message="Adding route ${COLBLUE}${route}${COLDEFAULT} ..." ;; | ||
337 | del) message="Removing route ${COLBLUE}${route}${COLDEFAULT} ..." ;; | ||
338 | *) | ||
339 | echo "config_routes: unsupported \$method '${method}'." | ||
340 | exit 1 | ||
341 | ;; | ||
342 | esac | ||
343 | |||
344 | # adds/delete user routes | ||
345 | if [[ -f /etc/conf.d/net.routes ]] | ||
346 | then | ||
347 | ( cat /etc/conf.d/net.routes; echo ) | # make sure there is a LF at the end | ||
348 | while read route | ||
349 | do | ||
350 | case "${route}" in | ||
351 | \#*|"") continue ;; | ||
352 | esac | ||
353 | echo -e ${COLOREDSTAR}"${message}" | ||
354 | route ${method} ${route} | ||
355 | evaluate_retval | ||
356 | done | ||
357 | fi | ||
358 | } | ||
359 | |||
360 | niro | 243 | networking_start() |
361 | { | ||
362 | niro | 522 | local iface dns routes ALL_INTERFACES |
363 | niro | 243 | |
364 | niro | 522 | if [[ -z $1 ]] |
365 | then | ||
366 | ALL_INTERFACES=$(onboot_interface_list ${network_settings}/net.*) | ||
367 | else | ||
368 | if [[ -e ${network_settings}/net.$1 ]] | ||
369 | then | ||
370 | ALL_INTERFACES="$1" | ||
371 | else | ||
372 | ${FAILURE} | ||
373 | echo "Interface $1 does not exist. Aborting" | ||
374 | ${NORMAL} | ||
375 | exit 1 | ||
376 | fi | ||
377 | fi | ||
378 | |||
379 | niro | 243 | # get list of all devices |
380 | niro | 522 | for iface in ${ALL_INTERFACES} |
381 | niro | 243 | do |
382 | # checkconfig | ||
383 | source ${network_settings}/net.${iface} || exit 1 | ||
384 | checkconfig | ||
385 | |||
386 | niro | 270 | # setup mac |
387 | if [ -n "${FORCE_MAC_TO}" ] | ||
388 | then | ||
389 | echo -e ${COLOREDSTAR}"Faking MAC to ${FORCE_MAC_TO} for ${COLBLUE}${iface}${COLDEFAULT} ... " | ||
390 | ifconfig "${iface}" hw ether "${FORCE_MAC_TO}" | ||
391 | evaluate_retval | ||
392 | fi | ||
393 | |||
394 | niro | 506 | # setup bridges |
395 | if [[ ${iface} = br[0-9]* ]] | ||
396 | then | ||
397 | config_bridge_devices ${iface} add | ||
398 | fi | ||
399 | |||
400 | niro | 270 | # now configure wireless_extensions |
401 | [ -x /usr/sbin/iwconfig ] && setup_wireless_extensions "${iface}" | ||
402 | |||
403 | niro | 243 | echo -e ${COLOREDSTAR}"Bringing up interface ${COLBLUE}${iface}${COLDEFAULT} ..." |
404 | |||
405 | niro | 868 | # activate the interface |
406 | ifconfig "${iface}" up | ||
407 | |||
408 | niro | 243 | # setup static or dhcp |
409 | case ${NETWORKING} in | ||
410 | dhcp|DHCP) | ||
411 | ${CURS_UP} | ||
412 | ${SET_WWCOL} | ||
413 | echo "[DHCP]" | ||
414 | niro | 275 | loadproc ${DHCP_PROG} ${DHCP_START} "${iface}" |
415 | niro | 2 | ;; |
416 | niro | 243 | static|STATIC) |
417 | ${CURS_UP} | ||
418 | ${SET_WWCOL} | ||
419 | echo "[STATIC]" | ||
420 | ifconfig "${iface}" "${IP}" netmask "${NETMASK}" broadcast "${BROADCAST}" | ||
421 | evaluate_retval | ||
422 | ;; | ||
423 | esac | ||
424 | niro | 2 | |
425 | niro | 243 | # setup def gw |
426 | if [[ -n ${GATEWAY} ]] | ||
427 | niro | 2 | then |
428 | niro | 245 | echo -e ${COLOREDSTAR}"Setting up default gateway for ${COLBLUE}${iface}${COLDEFAULT} ..." |
429 | niro | 243 | route add default gateway ${GATEWAY} metric 1 dev ${iface} |
430 | niro | 2 | evaluate_retval |
431 | niro | 684 | |
432 | unset GATEWAY | ||
433 | niro | 2 | fi |
434 | |||
435 | niro | 245 | # setup /etc/resolv.conf |
436 | if [[ -n ${NAMESERVER} ]] | ||
437 | then | ||
438 | echo -e ${COLOREDSTAR}"Setting up all nameserver for ${COLBLUE}${iface}${COLDEFAULT} ..." | ||
439 | |||
440 | # whipe out the old one | ||
441 | echo "# Generated by the magellan-initscripts for ${iface}" > /etc/resolv.conf | ||
442 | for dns in ${NAMESERVER} | ||
443 | do | ||
444 | echo "nameserver ${dns}" >> /etc/resolv.conf | ||
445 | done | ||
446 | niro | 684 | |
447 | unset NAMESERVER | ||
448 | niro | 245 | fi |
449 | niro | 243 | done |
450 | niro | 506 | |
451 | # setup user routes | ||
452 | config_routes add | ||
453 | niro | 243 | } |
454 | niro | 2 | |
455 | niro | 243 | networking_stop() |
456 | { | ||
457 | niro | 522 | if [[ -z $1 ]] |
458 | then | ||
459 | ALL_INTERFACES=$(onboot_interface_list ${network_settings}/net.*) | ||
460 | else | ||
461 | if [[ -e ${network_settings}/net.$1 ]] | ||
462 | then | ||
463 | ALL_INTERFACES="$1" | ||
464 | else | ||
465 | ${FAILURE} | ||
466 | echo "Interface $1 does not exist. Aborting" | ||
467 | ${NORMAL} | ||
468 | exit 1 | ||
469 | fi | ||
470 | fi | ||
471 | |||
472 | niro | 243 | # get list of all devices |
473 | niro | 522 | for iface in ${ALL_INTERFACES} |
474 | niro | 243 | do |
475 | source ${network_settings}/net.${iface} || exit 1 | ||
476 | checkconfig | ||
477 | |||
478 | if [[ -n ${GATEWAY} ]] | ||
479 | niro | 2 | then |
480 | echo -e ${COLOREDSTAR}"Removing default gateway ..." | ||
481 | route del -net default | ||
482 | evaluate_retval | ||
483 | fi | ||
484 | |||
485 | niro | 243 | echo -e ${COLOREDSTAR}"Bringing down interface ${COLBLUE}${iface}${COLDEFAULT} ..." |
486 | ifconfig ${iface} down | ||
487 | evaluate_retval | ||
488 | niro | 2 | |
489 | niro | 506 | # remove bridges |
490 | if [[ ${iface} = br[0-9]* ]] | ||
491 | then | ||
492 | config_bridge_devices ${iface} remove | ||
493 | fi | ||
494 | |||
495 | niro | 243 | # shutdown dhcp-daemon |
496 | if [[ ${NETWORKING} = dhcp ]] && [[ -n $(pidof ${DHCP_PROG}) ]] | ||
497 | then | ||
498 | echo -e ${COLOREDSTAR}"Stopping the dhcp-daemon ..." | ||
499 | ${CURS_UP} | ||
500 | ${SET_WWCOL} | ||
501 | echo "[$(basename ${DHCP_PROG})]" | ||
502 | niro | 270 | ${DHCP_PROG} ${DHCP_STOP} "${iface}" |
503 | niro | 243 | evaluate_retval |
504 | fi | ||
505 | niro | 268 | |
506 | # shutdown wpa_supplicant daemon | ||
507 | if [[ -n $(pidof wpa_supplicant) ]] | ||
508 | then | ||
509 | killall wpa_supplicant | ||
510 | fi | ||
511 | niro | 243 | done |
512 | niro | 275 | |
513 | niro | 270 | # remove state dir |
514 | if [ -d /var/run/wpa_supplicant ] | ||
515 | then | ||
516 | rm -rf /var/run/wpa_supplicant | ||
517 | fi | ||
518 | niro | 506 | |
519 | # delete user routes | ||
520 | config_routes del | ||
521 | niro | 243 | } |
522 | niro | 2 | |
523 | niro | 243 | case $1 in |
524 | start) | ||
525 | niro | 522 | networking_start $2 |
526 | niro | 2 | update_svcstatus $1 |
527 | niro | 243 | splash svc_started "$(basename $0)" 0 |
528 | ;; | ||
529 | |||
530 | stop) | ||
531 | niro | 522 | networking_stop $2 |
532 | niro | 243 | update_svcstatus $1 |
533 | niro | 2 | splash svc_stopped "$(basename $0)" 0 |
534 | ;; | ||
535 | |||
536 | restart) | ||
537 | $0 stop | ||
538 | sleep 1 | ||
539 | $0 start | ||
540 | ;; | ||
541 | |||
542 | *) | ||
543 | niro | 522 | echo "Usage: $0 {start|stop|restart} [interface]" |
544 | niro | 2 | exit 1 |
545 | ;; | ||
546 | esac |
Properties
Name | Value |
---|---|
svn:executable | * |