-include missing firmware blobs in initrd

-make SYSROOT variable and fixed variable substition while linking cloop mount dirs

-do not mount devtmpfs twice

-mount move initrd filesystems to real sysroot

-mount the best available filesystem for /dev

-version 6.5.2

-fixed build against linux-3.0

-version 6.5.1

-mount devtmpfs if supported

-better cmdline parsing logic

-respect rootdelay kernel param

-prefer devtmpfs if supported

-respect rootdelay kernel param

-ensure that /sysroot/linurc exists

-fix build with glibc-2.14, disable RPC features atm

-version 6.5.0

-do not include grubby anymore, using an extra package for easier dependency handling with upcoming dracut

bump version to 6.4.0

use relative pathes and updated coding style 

merged with upstream 7.0.16

merged with upstream 7.0.16

merged with upstream 7.0.16

--removed unused dracut and plymoth settings from man page

man page updates from upstream

merged with 7.0.16: upstream commit:  http://git.fedorahosted.org/git?p=grubby.git;a=commit;h=1301a5819fa50b432b6ab0075f36f4019855e860
Add support for grub2 to new-kernel-pkg

http://git.fedorahosted.org/git?p=grubby.git;a=commit;h=da297818977654a680f938a1ccef84f3994a9de0
Make --update capable of adding an initramfs, so that we can use it in  --posttrans from the kernel, and add an entry without the initrd in
 %post.  This way we can build the initrd later than the kernel
 %installation.

and added some minor fixes

merged with 7.0.16: upstream commit:  http://git.fedorahosted.org/git?p=grubby.git;a=commit;h=703a5b7353fc34df4401bba226736176e1c62b7e
When passing --update-kernel=ALL the --args should apply to all kernel entries, not just the first one.

support 2.6.39:
-load ehci host module at first to suppress kernel warnings

support 2.6.39:
-added missing sas and scsi drivers
-removed all fibrechannel, fcoe and iscsi drivers

support 2.6.39:
-added missing sata driver

support 2.6.39:
-added missing pata driver

-only keep needed nls modules, not all

support 2.6.39:
-added backlight drivers
-added display output switcher module

-updated to klibc-1.5.22 with mntproc definitions patch included

-added unionfs support

-remove unneccessary glib-2.0 requirement

-updated version

-support for gzip compressed kernel-modules

-support for gzip compressed kernel-modules

-added shell drop-in support into the initrd when 'break' was given on the cmdline

-added ahci module
-added missing ata_piix module (pata/sata driver for intel chipsets)

-added missing ata_piix module (pata/sata driver for intel chipsets)

-added ata_generic module to support kernels without support for the deprecated ide-framework

-fixed missing man-pages

-version 6.3.3

-variable initexec support, also respect init= from kernel cmdline

-updated to busybox-1.17.4

-added missing man page

-added check for return value of getuuidbydev() - resolves a segfault if the device does not exist - see rhbz#592294

-version 6.3.2

-removed deprecated MAKEDEV stuff

-re-added Makefile which get lost by accident

-removed deprecated MAKEDEV stuff

-removed deprecated MAKEDEV stuff

--updated to match 2.6.35

-merged with upstream:
-update initrd support
-better rootdev handling
-better support for uuids

-install installkernel man-page

-added installkernel man-page

-install grubby man-page

-fixed a typo

-version 6.3.1

-fixed make-3.82 showstopper:
Makefile:436: *** mixed implicit and normal rules.  Stop.

-dropped kudzu, using hwinfo instead if present

-version 6.3.0

-added upstream mdev patch

-force 'chmod +x' on busybox scripts

-fixed 'make install' target

-removed

-updated to isolinux-3.86

-dropped loadinitrd - not needed anymore

-dropped nash - not needed anymore

-added xhci-hcd

-removed all deprecated ata modules; we do not include them anymore (>= 2.6.35-magellan-r1)
-added pata_atp867x
-added pata_piccolo
-added pata_rdc

-added btrfs

-added upstream shell patch

-added upstream sed patch

-added upstream mktemp patch

-added upstream mdev patch

-updated to busybox-1.17.1

-updated to klibc-1.5.19

-version 6.2.3

-fixed default config to build a static busybox

-version 6.2.2

-added missing files

-version 6.2.1

-added missing file

-fixed modprobe.conf.d handling

-added upstream sed patch

-added upstream indexcgi patch

-added upstream hwclock patch

-added upstream hush patch

-added upstream dnsd patch

-added upstream dhcpd patch

-added upstream cpio patch

-added upstream ash patch

-updated to busybox-1.16.1 and enabled blkid/uuid support in default config

-fixed missing mandir variable
- version 6.1.12

-fixed missing mandir variable

-version 6.1.11

-read grub options from /etc/conf.d/grub

-read config from /etc/conf.d/grubby

-updated style

-pulled in new version from fedora (7.0.8) with update support
-removed dracut and fedara specific stuff
-fixed to work with magellan

-version 6.1.10

-fixed grub.conf default location

-version 6.1.9

-we not providing installkernel here

-version 6.1.8

-updated grubby to version 7.0.8 from fedory with blkid support

-version 6.1.7

-updated to match 2.6.31

-fixed missing mntproc definitions with newer kernels (>= 2.6.31)

-fixed signal changes with linux-2.6.30 and above

-version 6.1.6

-fixed some issues, if already UUIDs are used in the fstab
-do not create the rootdev device node anymore - not needed with mdev

-using UUIDs via blkid instead of static device-names

-version 6.1.4

-install all busybox applets
-use mdev for /dev management
-use inmod from busybox
-fixed a small typo regarding v86d installation
-set DOSATA and DOPATA as default settings
-support all do/no commandline combinations

-moved genric scsi modules to modules.generic

-moved genric scsi modules to modules.generic

-version 6.1.3
-fixed usage with newer modutils, the depmod file format has changed:
modules.dep not using full pathes anymore, only relative
old:
/lib/modules/2.6.25-magellan-r4/kernel/fs/ext3/ext3.ko: /lib/modules/2.6.25-magellan-r4/kernel/fs/jbd/jbd.ko
new:
kernel/fs/ext3/ext3.ko: kernel/fs/jbd/jbd.ko

-applied klibc-1.5.15-fix-2.6.29-includes.patch to fix include issues with linux-2.6.29

-applied klibc-1.5.14-x86_64-fix-io.h.patch to fix errors in io.h

-changed config to build a static busybox binary as default

-fixed make-tarball script

-converted cvsignore to svn:ignore propset

-ver bump to 6.1.0

-added missing busybox doc

-updated to busybox-1.13.4

-updated to klibc-1.5.15

-added modules for 2.6.29

-fixed header

-fixed header

-fixed header

-fixed header

-fixed header

-converted for use with svn

-typos

- remove die() function arguments

-create tty device to be able to log the boot process and busybox need tty5 or it complains

-since kernel 2.6.25 ide-cd is named ide-cd_mod

-drop into a shell if sysroot mount fails

-fixed a typo

-6.0.7

-fixes some mounting issues

-updated version to 6.0.6

-include v86d for uvesafb support in the initrd

-updated with 2.6.24 modules

-only load pata modules, if requested not automatically. fixes some issues with nforce boards and linux-2.6.21

-fixed a typo and load framebuffer modules first of all

-added framebuffer console related modules

-added support for frambuffer modules

ver up to 6.0.3

-added support for frambuffer modules
-added support for a custom linuxrc
-display usage if no target or kernel are given
-ignore non existens modules.lists in install_kernel_modules()

-added support for frambuffer modules and a variable rootfs wich kann be forced via kernel cmdline (e.g. rootfs=ext2)

- added frambuffer modules

-fixed CVSROOT and DESTINATION

-version 6.0.2

-use linux sources from /usr/src/linux not the kernel runtime path, as the kernel may not installed

-updated to 6.0.1

-multilib support

-fixed variable LIBDIR

-fixed "clean" target

-added "clean" target

-fixed cvsignore

-added cvsignore

-renamed to mkinitrd.in

pruned old cruft

-renamed to mkinitrd-livecd.in

-fix %VERSIONTAG% and LIBDIR in build phase

-fix %VERSIONTAG% in build phase

-variable LIBDIR

-variable LIBDIR

-do not install unneccessary man dir

-fixed doc install

-fixed typos

-remove cvsignore, but not recursive

-remove .cvsignore from tarball

-added cvsignore

-fixed cvsignore

-fixed "test" target

-fixed CFLAGS

-compress docs

-fixed missing usr/sbin directory

-added some missing docs

-added cvsignore

-added tarball-creation script

-fixed missing target all:

-added cvsignore

-fixed cvsignore

-fixed cvsignore

-fixed "clean" target

-pruned build cruft

-fixed cvsignore

-fixed cvsignore

-added cvsignore

-import if magellan mkinitrd; it is a fork of redhats mkinitrd-5.0.8 with all magellan patches and features; deprecates magellan-src/mkinitrd