mcore-install/bin/mcore-install.sh

#!/bin/bash
# $Id$

# ignore environment!
LC_ALL=C

MLIBDIR="/usr/lib/mcore-install"

# images: (get ${CDIMAGENAME})
source /mnt/cdrom/system/images.conf

# includes
source ${MLIBDIR}/functions/hwdetection.sh

### System/Config Version
VERSION="@@VERSION@@"
TITLE="mcore-install - ${VERSION}"

CDPATH="/mnt/cdrom"
INSTALL_ROOT="/mnt/magellan"

### linecount of system.tar.gz -1 !
CURRENTLINE=0
#TOTALLINES=11072 # -> now in images.conf

# standart kernel opts
KERNELOPTS="quiet"

# default specialdevices
SPECIALDEVICE=""

# target filesystem
FORMAT_FILESYSTEM="ext4"

#################################################
#		  DIALOG BOXEN			#
#################################################

die()
{
	ERROR="$1"
	RETVAL="$?"
	dialog_install_failure
	exit 1
}

dialog_warning()
{
	local retval

	dialog \
	--backtitle "${TITLE}" \
	--colors \
	--defaultno \
	--yesno "\Z1 !!! Achtung !!! \Zn\n\n\
	Diese Festplatte wird unwiederruflich geloescht werden.\n\n\
		Soll ich wirklich fortfahren ?" 10 70
	retval=$?
	if [[ ${retval} -eq 1 ]]
	then
		clear
		echo "Der Vorgang wurde abgebrochen."
		exit 1
	fi
}

dialog_setup_hdd_info()
{
	local SHDD="$(echo $HDD | sed 's/\/dev\///')"

	dialog \
	--colors \
	--title "[ Festplatten Partitionierung ]" \
	--backtitle "${TITLE}" \
	--ok-label "Weiter" \
	--msgbox "\nBitte legen Sie 1 Partition an.\n\n\
		[ \Z3${SHDD}1\Zn ] Typ: \Z3Linux\Zn mit dem gesamten Speicher\n\
		Bitte ${SHDD}1 als \Z3bootable\Zn markieren." 12 81
}

dialog_setup_hdd_info_auto()
{
	local SHDD="$(echo $HDD | sed 's/\/dev\///')"

	dialog \
	--colors \
	--title "[ Festplatten Partitionierung ]" \
	--backtitle "${TITLE}" \
	--ok-label "Weiter" \
	--msgbox "\nAchtung!\n\
		Alle Daten werden von der Disk [ \Z3${HDD}\Zn ] gelöscht!" 12 81
}

dialog_setup_system_menu()
{
	local i
	local retval

	i=$(dialog \
	--backtitle "${TITLE}" \
	--title "[ Festplatten Partitionierung ]" \
	--cancel-label "Abbrechen" \
	--ok-label "Weiter" \
	--stdout \
	--colors \
	--menu "\nWaehlen Sie die Installations-Methode" 14 70 5 \
	"1" "Automatisches Setup (Empfohlen)" \
	"" "" \
	"" "\Z1Experten Modi:\Zn" \
	"2" "Normale IDE-Disk (Manuell)")
	retval=$?
	[[ ${retval} -eq 1 ]] && return 1
	if [[ ${retval} -eq 0 ]]
	then
		case "${i}" in
			"1") run_install_auto ;;
        		"2") run_install_normal ;;
			"") dialog_setup_system_menu;;
		esac
	fi
}

dialog_hardware_detection()
{
	local i
	local hwtmp

	if [ -x $(which mktemp &> /dev/null) ]
	then
		hwtmp="$(mktemp)"
	else
		hwtmp="/tmp/hwtmp.sh"
	fi

	run_hardware_detection_disks

	echo "dialog \\"  > ${hwtmp}
	echo "--backtitle \"${TITLE}\" \\" >> ${hwtmp}
	echo "--ok-label \"Weiter\" \\" >> ${hwtmp}
	echo "--stdout \\" >> ${hwtmp}
	echo "--colors \\" >> ${hwtmp}
	echo "--msgbox \"Gefundene Hardware:\n\n \\" >> ${hwtmp}
	echo "	Festplatten:\n \\" >> ${hwtmp}

	if [[ ! -z ${ALL_DISKS} ]]
	then
		for i in ${ALL_DISKS}
		do
			echo "		\\Z3${i}\\Zn\n \\" >> ${hwtmp}
		done
	fi

	if [[ ! -z ${ALL_CDROMS} ]]
	then
		echo "	\n \\" >> ${hwtmp}
		echo "	CDROM Laufwerke:\n \\" >> ${hwtmp}
		for i in ${ALL_CDROMS}
		do
			echo "		\\Z3${i}\\Zn\n \\" >> ${hwtmp}
		done
	fi

	# other devices
	run_hardware_detection
	case "${SPECIALDEVICE}" in
		zotac) echo "	\n \\Z2Zotac Device erkannt!\\Zn \\" >> ${hwtmp} ;;
		*) echo "	\n \\ZnStandard Device erkannt!\\Zn \\" >> ${hwtmp} ;;
	esac

	echo "	\" 13 70" >> ${hwtmp}
	chmod a+x ${hwtmp}
	${hwtmp}

	# remove tmp file
	if [[ -f ${hwtmp} ]]
	then
		rm ${hwtmp}
	fi
}

dialog_setup_hdd_partitions_manuell()
{
	local i
	local retval

	if [[ -z ${ALL_DISKS} ]]
	then
		dialog \
		--backtitle "${TITLE}" \
		--ok-label "Beenden" \
		--msgbox "Kein geeignetes Laufwerk gefunden.\nDie Installation ist fehlgeschlagen." 6 70
		exit 1
	else
		echo "dialog \\" > /tmp/hddtmp.sh
		echo "--backtitle \"${TITLE}\" \\" >> /tmp/hddtmp.sh
		echo "--ok-label \"Weiter\" \\" >> /tmp/hddtmp.sh
		echo "--cancel-label \"Beenden\" \\" >> /tmp/hddtmp.sh
		echo "--stdout \\" >> /tmp/hddtmp.sh
		echo "--menu \"Installations Laufwerk auswaehlen:\" 10 70 3 \\" >> /tmp/hddtmp.sh

		for i in ${ALL_DISKS}
		do
			echo "\"${i}\" \"\" \\" >> /tmp/hddtmp.sh
		done
		echo -e "\n" >> /tmp/hddtmp.sh

		chmod a+x /tmp/hddtmp.sh
		HDD="$(/tmp/hddtmp.sh)"
		retval=$?
		[[ ${retval} -eq 1 ]] && return 1
		if [[ ${retval} -eq 0 ]]
		then
			dialog_setup_hdd_info
			setup_hdd_partitions_manuell
		fi
	fi
}

dialog_setup_hdd_partitions_auto()
{
	local i
	local retval

	if [[ -z ${ALL_DISKS} ]]
	then
		dialog \
		--backtitle "${TITLE}" \
		--ok-label "Beenden" \
		--msgbox "Kein geeignetes Laufwerk gefunden.\nDie Installation ist fehlgeschlagen." 6 70
		exit 1
	else
		echo "dialog \\" > /tmp/hddtmp.sh
		echo "--backtitle \"${TITLE}\" \\" >> /tmp/hddtmp.sh
		echo "--ok-label \"Weiter\" \\" >> /tmp/hddtmp.sh
		echo "--cancel-label \"Beenden\" \\" >> /tmp/hddtmp.sh
		echo "--stdout \\" >> /tmp/hddtmp.sh
		echo "--menu \"Installations Laufwerk auswaehlen:\" 10 70 3 \\" >> /tmp/hddtmp.sh

		for i in ${ALL_DISKS}
		do
			echo "\"${i}\" \"\" \\" >> /tmp/hddtmp.sh
		done
		echo -e "\n" >> /tmp/hddtmp.sh

		chmod a+x /tmp/hddtmp.sh
		HDD="$(/tmp/hddtmp.sh)"
		retval=$?
		[[ ${retval} -eq 1 ]] && return 1
		if [[ ${retval} -eq 0 ]]
		then
			dialog_setup_hdd_info_auto
			dialog_setup_hdd_create_partitions
			setup_hdd_partitions_auto
		fi
	fi
}

dialog_setup_hdd_create_partitions()
{
	dialog \
	--backtitle "${TITLE}" \
	--infobox "Erstelle Disk Partitionen ..." 3 70
}

dialog_setup_hdd_format()
{
	dialog \
	--backtitle "${TITLE}" \
	--infobox "Erstelle Datei-Systeme ..." 3 70
}

dialog_install_settings()
{
	dialog \
	--backtitle "${TITLE}" \
	--infobox "Speichere System-Einstellungen ..." 3 70
}

dialog_install_system_image()
{
	dialog \
	--backtitle "${TITLE}" \
	--gauge "Kopiere System-Image ..." 6 80
}

dialog_install_initrd()
{
	dialog \
	--backtitle "${TITLE}" \
	--infobox "Erstelle Initrd ..." 3 70
}

dialog_install_meter()
{
	while [[ ${CURRENTLINE} != ${TOTALLINES} ]]
	do
		CURRENTLINE=$(grep -c . /tmp/install.log)
		PERCENT=$(( ${CURRENTLINE} * 100 / ${TOTALLINES}))
		echo "${PERCENT}"
		sleep 1
	done
	rm -f /tmp/install.log
	return 0
}

dialog_install_bootsector()
{
	dialog \
	--backtitle "${TITLE}" \
	--infobox "Schreibe den Bootsektor ..." 3 70
}

dialog_install_successful()
{
	dialog \
	--backtitle "${TITLE}" \
	--colors \
	--msgbox "Die Installation war \Z2erfolgreich\Zn." 5 81
}

dialog_install_failure()
{
	dialog \
	--backtitle "${TITLE}" \
	--colors \
	--msgbox "Die Installation ist \Z1Fehlgeschlagen\Zn.\n\n\
		Fehler bei ${ERROR}, RetVal: ${RETVAL} \
	" 10 81
}

dialog_main()
{
	local method=0
	local retval

	while [[ ${method} -le 2 ]]
	do
		method=$(dialog \
		--backtitle "${TITLE}" \
		--no-cancel \
		--ok-label "Weiter" \
		--stdout \
		--menu "Konfiguration" 14 70 5 \
		"1" "mCore installieren" \
		"2" "Uebersicht gefundener Laufwerke" \
		"3" "Beenden und neustarten" \
		"4" "Beenden und eine Shell starten")
		retval=$?
		[[ ${retval} -eq 1 ]] && exit 1
		if [[ ${retval} -eq 0 ]]
		then
			case ${method} in
        			"1") dialog_setup_system_menu ;;
				"2") dialog_hardware_detection ;;
				"3") install_do_reboot ;;
				"4") clear;/bin/bash --login -i ;;
			esac
		fi
	done
}

#################################################
#		Install Komandos		#
#################################################
run_hardware_detection()
{
	# check for special devices/clients:
	#  if the device is a zotac and has a removeable device as boot disk,
	#  then add a rootdelay of 8 seconds to kernelcmd
	local removable=0
	if [[ ! -z $(lspci -v | grep -i zotac) ]]
	then
		for i in /sys/block/[hs]d*/removable
		do
			if [[ $(< ${i}) = 1 ]]
			then
				removable=1
			fi
		done

		export KERNELOPTS="${KERNELOPTS} rootdelay=8"
		export SPECIALDEVICE="zotac"
	fi
}

run_hardware_detection_disks()
{
	local bootdev

	# all disks but exclude ramdisks
	export ALL_DISKS=$(get_hwinfo disk | sed '/\/dev\/ram[0-9].*/d')
	# remove the boot device from ALL_DISKS if it was an usbstick
	if [[ $(grep '[[:space:]]/mnt/cdrom[[:space:]]' /proc/mounts | cut -d' ' -f3) != iso9660 ]]
	then
		bootdev="$(grep '[[:space:]]/mnt/cdrom[[:space:]]' /proc/mounts | cut -d' ' -f1 | sed 's:[0-9]::g')"
		export ALL_DISKS=$(echo "${ALL_DISKS}" | grep -v "${bootdev}")
	fi
	export ALL_CDROMS="$(get_hwinfo cdrom)"
}

setup_hdd_partitions_auto()
{
	ROOTHDD="${HDD}1"

	## delete disk
	dd if=/dev/zero of="${HDD}" count=1 &> /dev/null || die

	## setup one bootable partition
	#1. n= new disk
	#2. p= primary disk
	#3. 1= first partition
	#4. ''= default sector start
	#5. ''= defaul sector end
	#6. a= bootable flag
	#7. 1= boot flag for partition 1
	#8. w= write/quit
	fdisk "${HDD}" &> /dev/null << EOF
n
p
1


a
1
w
EOF
}

setup_hdd_partitions_manuell()
{
	ROOTHDD="${HDD}1"
	cfdisk "${HDD}" || die
}

setup_hdd_format()
{
	mkfs."${FORMAT_FILESYSTEM}" -q "${ROOTHDD}" || die
}

install_mount_rootfs()
{
	mount "${ROOTHDD}" "${INSTALL_ROOT}" || die
	install -d ${INSTALL_ROOT}/boot || die
	cd ${INSTALL_ROOT} || die
}

install_system_image()
{
	tar xvjpf ${CDPATH}/system/${CDIMAGENAME} -C ${INSTALL_ROOT}
}

install_bootsector()
{
	local uuid
	local initrd
	local kernelversion
	local grubtitle
	local chroot
	local grubdisk
	local CONFIG

	# setup a proper boot device
	if [[ -z ${BOOTHDD} ]]
	then
		grubdisk="${ROOTHDD}"
	else
		grubdisk="${BOOTHDD}"
	fi

	# first of all, create a device.map
	create_device_map

	# get kernelnames
	initrd=/boot/$(readlink ${INSTALL_ROOT}/boot/initrd)
	kernelversion=$(readlink ${INSTALL_ROOT}/boot/vmlinuz | sed "s:kernel-::g")

	# for mcore only
	if [ -f ${INSTALL_ROOT}/etc/mcore_version ]
	then
		grubtitle="mCore-$(< ${INSTALL_ROOT}/etc/mcore_version) (${kernelversion})"
	else
		grubtitle="mCore (${kernelversion})"
	fi

	# uuid support
	uuid=$(get_uuid "${ROOTHDD}")

	CONFIG="${INSTALL_ROOT}/boot/grub/grub.conf"
	clearconfig
	addconfig 'default 0'
	addconfig 'timeout 3'
	if [[ -f ${INSTALL_ROOT}/boot/grub/splash.xpm.gz ]]
	then
		addconfig "splashimage $(convert_device ${grubdisk})/boot/grub/splash.xpm.gz"
	fi
	# using current root password
	addconfig "password --md5 $(cat ${INSTALL_ROOT}/etc/shadow | grep root | cut -d: -f2)"
	addconfig
	addconfig '# normal boot'
	addconfig "title ${grubtitle}"
	addconfig "root $(convert_device ${grubdisk})"
	addconfig "kernel /boot/kernel-${kernelversion} root=${uuid} ${KERNELOPTS}"
	addconfig "initrd /boot/${initrd}"

	[[ ! -z ${INSTALL_ROOT} ]] && chroot=chrooted

	# update grub
	${chroot} grub --batch --no-floppy &> /dev/null << EOF
root $(convert_device ${grubdisk})
setup $(convert_device ${grubdisk} | sed "s:,[0-9]::")
quit
EOF

	return 0
}

create_device_map()
{
	local chroot

	[[ ! -z ${INSTALL_ROOT} ]] && chroot=chrooted

	# create device.map
	${chroot} grub --batch --no-floppy --no-config-file --device-map=/boot/grub/device.map </dev/null &> /dev/null
}

convert_device()
{
	local device="$1"
	local root_part=

	# extract device type (block) and major number for root drive
	local major_minor=$(ls -Ll ${device} | awk '{if ($6 < 64) printf("%c%d0", $1, $5); else printf("%c%d1", $1, $5)}')

	# find the matching BIOS device
	for bios_drive in $(grep -v '^#' ${INSTALL_ROOT}/boot/grub/device.map | awk '{print $2}')
	do
		bios_major_minor=$(ls -Ll ${bios_drive} 2>/dev/null | awk '{if ($6 < 64) printf("%c%d0", $1, $5); else printf("%c%d1", $1, $5)}')

		if [[ ${major_minor} = ${bios_major_minor} ]]
		then
			# we found it
			root_drive=$(grep ${bios_drive} ${INSTALL_ROOT}/boot/grub/device.map | awk '{print $1}')
			root_part=$(ls -Ll ${device} | awk '{print $6}')
			root_part=$(( ${root_part} % 16 - 1 ))
			break
		fi
	done

	drive=$(echo ${root_drive} | sed "s:)$:,${root_part}):")
	echo ${drive}
}

install_initrd()
{
	local initrd
	local kernelversion

	initrd=/boot/$(readlink ${INSTALL_ROOT}/boot/initrd)
	kernelversion=$(readlink ${INSTALL_ROOT}/boot/vmlinuz | sed "s:kernel-::g")

	create_initrd --initrd "${initrd}" --kernelversion "${kernelversion}" &> /dev/null
}

install_system_settings()
{
	local CONFIG
	local uuid

	# schreibe fstab
	uuid=$(get_uuid "${ROOTHDD}")
	CONFIG="${INSTALL_ROOT}/etc/fstab"
	clearconfig
	addconfig -e "UUID=${uuid}\t/\t${FORMAT_FILESYSTEM}\tnoatime\t0 0"
	addconfig -e "proc\t/proc\tproc\tdefaults\t0 0"
	addconfig -e "shm\t/dev/shm\ttmpfs\tdefaults\t0 0"

	# install network config skeleton
	CONFIG="${INSTALL_ROOT}/etc/conf.d/net.eth0"
	clearconfig
	addconfig 'ONBOOT="yes"'
	addconfig 'NETWORKING="dhcp"'
}

install_umount_rootfs()
{
	cd /
	umount ${INSTALL_ROOT} || die
}

install_do_reboot()
{
	reboot
}

#################################################
#	     Install Ablauf Scripte		#
#################################################

addconfig()
{
	local opts

	if [[ -z ${CONFIG} ]]
	then
		echo "You must define \$CONFIG varibale first!"
		return 1
	fi

	if [[ ! -d $(dirname ${CONFIG}) ]]
	then
		install -d $(dirname ${CONFIG})
	fi

	# check for opts
	case $1 in
		-n) shift; opts=" -n" ;;
		-e) shift; opts=" -e" ;;
	esac

	echo ${opts} "$@" >> ${CONFIG}
}

clearconfig()
{
	if [[ -z ${CONFIG} ]]
	then
		echo "You must define \$CONFIG varibale first!"
		return 1
	fi

	if [[ ! -d $(dirname ${CONFIG}) ]]
	then
		install -d $(dirname ${CONFIG})
	fi
	: > ${CONFIG}
}

run_install_normal()
{
	dialog_hardware_detection

	dialog_setup_hdd_partitions_manuell
	dialog_setup_hdd_format
	setup_hdd_format > /dev/null
	install_mount_rootfs
	(install_system_image > /tmp/install.log) 2> /tmp/install_errors.log | dialog_install_meter | dialog_install_system_image

	dialog_install_bootsector
	install_bootsector

	dialog_install_settings
	sleep 1
	install_system_settings
	dialog_install_initrd
	install_initrd
	install_umount_rootfs
	dialog_install_successful
}

run_install_auto()
{
	dialog_hardware_detection

	dialog_setup_hdd_partitions_auto
	dialog_setup_hdd_format
	setup_hdd_format > /dev/null
	install_mount_rootfs
	(install_system_image > /tmp/install.log) 2> /tmp/install_errors.log | dialog_install_meter | dialog_install_system_image

	dialog_install_bootsector
	install_bootsector

	dialog_install_settings
	sleep 1
	install_system_settings
	dialog_install_initrd
	install_initrd
	install_umount_rootfs
	dialog_install_successful
}

dialog_main

exit 0
1	niro	1275	#!/bin/bash
2			# $Id$
3
4	niro	1294	# ignore environment!
5			LC_ALL=C
6	niro	1275
7	niro	1294	MLIBDIR="/usr/lib/mcore-install"
8
9	niro	1275	# images: (get ${CDIMAGENAME})
10			source /mnt/cdrom/system/images.conf
11
12			# includes
13	niro	1294	source ${MLIBDIR}/functions/hwdetection.sh
14	niro	1275
15			### System/Config Version
16			VERSION="@@VERSION@@"
17			TITLE="mcore-install - ${VERSION}"
18
19			CDPATH="/mnt/cdrom"
20	niro	1294	INSTALL_ROOT="/mnt/magellan"
21	niro	1275
22	niro	1294	### linecount of system.tar.gz -1 !
23	niro	1275	CURRENTLINE=0
24			#TOTALLINES=11072 # -> now in images.conf
25
26			# standart kernel opts
27			KERNELOPTS="quiet"
28
29			# default specialdevices
30			SPECIALDEVICE=""
31
32	niro	1294	# target filesystem
33	niro	1660	FORMAT_FILESYSTEM="ext4"
34	niro	1294
35	niro	1275	#################################################
36			# DIALOG BOXEN #
37			#################################################
38
39			die()
40			{
41	niro	1294	ERROR="$1"
42			RETVAL="$?"
43	niro	1275	dialog_install_failure
44			exit 1
45			}
46
47			dialog_warning()
48			{
49	niro	1294	local retval
50
51	niro	1275	dialog \
52			--backtitle "${TITLE}" \
53			--colors \
54			--defaultno \
55			--yesno "\Z1 !!! Achtung !!! \Zn\n\n\
56			Diese Festplatte wird unwiederruflich geloescht werden.\n\n\
57			Soll ich wirklich fortfahren ?" 10 70
58	niro	1294	retval=$?
59			if [[ ${retval} -eq 1 ]]
60	niro	1275	then
61			clear
62			echo "Der Vorgang wurde abgebrochen."
63			exit 1
64			fi
65			}
66
67			dialog_setup_hdd_info()
68			{
69			local SHDD="$(echo $HDD \| sed 's/\/dev\///')"
70
71			dialog \
72			--colors \
73			--title "[ Festplatten Partitionierung ]" \
74			--backtitle "${TITLE}" \
75			--ok-label "Weiter" \
76			--msgbox "\nBitte legen Sie 1 Partition an.\n\n\
77			[ \Z3${SHDD}1\Zn ] Typ: \Z3Linux\Zn mit dem gesamten Speicher\n\
78			Bitte ${SHDD}1 als \Z3bootable\Zn markieren." 12 81
79			}
80
81			dialog_setup_hdd_info_auto()
82			{
83			local SHDD="$(echo $HDD \| sed 's/\/dev\///')"
84
85			dialog \
86			--colors \
87			--title "[ Festplatten Partitionierung ]" \
88			--backtitle "${TITLE}" \
89			--ok-label "Weiter" \
90			--msgbox "\nAchtung!\n\
91			Alle Daten werden von der Disk [ \Z3${HDD}\Zn ] gelöscht!" 12 81
92			}
93
94			dialog_setup_system_menu()
95			{
96			local i
97	niro	1294	local retval
98	niro	1275
99			i=$(dialog \
100			--backtitle "${TITLE}" \
101			--title "[ Festplatten Partitionierung ]" \
102			--cancel-label "Abbrechen" \
103			--ok-label "Weiter" \
104			--stdout \
105			--colors \
106			--menu "\nWaehlen Sie die Installations-Methode" 14 70 5 \
107			"1" "Automatisches Setup (Empfohlen)" \
108			"" "" \
109			"" "\Z1Experten Modi:\Zn" \
110	niro	1294	"2" "Normale IDE-Disk (Manuell)")
111			retval=$?
112			[[ ${retval} -eq 1 ]] && return 1
113			if [[ ${retval} -eq 0 ]]
114	niro	1275	then
115			case "${i}" in
116			"1") run_install_auto ;;
117			"2") run_install_normal ;;
118			"") dialog_setup_system_menu;;
119			esac
120			fi
121			}
122
123			dialog_hardware_detection()
124			{
125			local i
126			local hwtmp
127
128			if [ -x $(which mktemp &> /dev/null) ]
129			then
130			hwtmp="$(mktemp)"
131			else
132			hwtmp="/tmp/hwtmp.sh"
133			fi
134
135	niro	1294	run_hardware_detection_disks
136	niro	1275
137			echo "dialog \\" > ${hwtmp}
138			echo "--backtitle \"${TITLE}\" \\" >> ${hwtmp}
139			echo "--ok-label \"Weiter\" \\" >> ${hwtmp}
140			echo "--stdout \\" >> ${hwtmp}
141			echo "--colors \\" >> ${hwtmp}
142			echo "--msgbox \"Gefundene Hardware:\n\n \\" >> ${hwtmp}
143			echo " Festplatten:\n \\" >> ${hwtmp}
144
145	niro	1294	if [[ ! -z ${ALL_DISKS} ]]
146	niro	1275	then
147	niro	1294	for i in ${ALL_DISKS}
148	niro	1275	do
149	niro	1294	echo " \\Z3${i}\\Zn\n \\" >> ${hwtmp}
150	niro	1275	done
151			fi
152
153	niro	1294	if [[ ! -z ${ALL_CDROMS} ]]
154	niro	1275	then
155	niro	1294	echo " \n \\" >> ${hwtmp}
156			echo " CDROM Laufwerke:\n \\" >> ${hwtmp}
157			for i in ${ALL_CDROMS}
158	niro	1275	do
159	niro	1294	echo " \\Z3${i}\\Zn\n \\" >> ${hwtmp}
160	niro	1275	done
161			fi
162
163			# other devices
164			run_hardware_detection
165			case "${SPECIALDEVICE}" in
166	niro	1294	zotac) echo " \n \\Z2Zotac Device erkannt!\\Zn \\" >> ${hwtmp} ;;
167			*) echo " \n \\ZnStandard Device erkannt!\\Zn \\" >> ${hwtmp} ;;
168	niro	1275	esac
169
170			echo " \" 13 70" >> ${hwtmp}
171			chmod a+x ${hwtmp}
172			${hwtmp}
173
174			# remove tmp file
175			if [[ -f ${hwtmp} ]]
176			then
177			rm ${hwtmp}
178			fi
179			}
180
181			dialog_setup_hdd_partitions_manuell()
182			{
183			local i
184	niro	1294	local retval
185	niro	1275
186	niro	1294	if [[ -z ${ALL_DISKS} ]]
187	niro	1275	then
188			dialog \
189			--backtitle "${TITLE}" \
190			--ok-label "Beenden" \
191			--msgbox "Kein geeignetes Laufwerk gefunden.\nDie Installation ist fehlgeschlagen." 6 70
192			exit 1
193			else
194			echo "dialog \\" > /tmp/hddtmp.sh
195			echo "--backtitle \"${TITLE}\" \\" >> /tmp/hddtmp.sh
196			echo "--ok-label \"Weiter\" \\" >> /tmp/hddtmp.sh
197			echo "--cancel-label \"Beenden\" \\" >> /tmp/hddtmp.sh
198			echo "--stdout \\" >> /tmp/hddtmp.sh
199			echo "--menu \"Installations Laufwerk auswaehlen:\" 10 70 3 \\" >> /tmp/hddtmp.sh
200
201	niro	1294	for i in ${ALL_DISKS}
202	niro	1275	do
203			echo "\"${i}\" \"\" \\" >> /tmp/hddtmp.sh
204			done
205			echo -e "\n" >> /tmp/hddtmp.sh
206
207			chmod a+x /tmp/hddtmp.sh
208			HDD="$(/tmp/hddtmp.sh)"
209	niro	1294	retval=$?
210			[[ ${retval} -eq 1 ]] && return 1
211			if [[ ${retval} -eq 0 ]]
212	niro	1275	then
213			dialog_setup_hdd_info
214			setup_hdd_partitions_manuell
215			fi
216			fi
217			}
218
219			dialog_setup_hdd_partitions_auto()
220			{
221			local i
222	niro	1294	local retval
223	niro	1275
224	niro	1294	if [[ -z ${ALL_DISKS} ]]
225	niro	1275	then
226			dialog \
227			--backtitle "${TITLE}" \
228			--ok-label "Beenden" \
229			--msgbox "Kein geeignetes Laufwerk gefunden.\nDie Installation ist fehlgeschlagen." 6 70
230			exit 1
231			else
232			echo "dialog \\" > /tmp/hddtmp.sh
233			echo "--backtitle \"${TITLE}\" \\" >> /tmp/hddtmp.sh
234			echo "--ok-label \"Weiter\" \\" >> /tmp/hddtmp.sh
235			echo "--cancel-label \"Beenden\" \\" >> /tmp/hddtmp.sh
236			echo "--stdout \\" >> /tmp/hddtmp.sh
237			echo "--menu \"Installations Laufwerk auswaehlen:\" 10 70 3 \\" >> /tmp/hddtmp.sh
238
239	niro	1294	for i in ${ALL_DISKS}
240	niro	1275	do
241			echo "\"${i}\" \"\" \\" >> /tmp/hddtmp.sh
242			done
243			echo -e "\n" >> /tmp/hddtmp.sh
244
245			chmod a+x /tmp/hddtmp.sh
246			HDD="$(/tmp/hddtmp.sh)"
247	niro	1294	retval=$?
248			[[ ${retval} -eq 1 ]] && return 1
249			if [[ ${retval} -eq 0 ]]
250	niro	1275	then
251			dialog_setup_hdd_info_auto
252			dialog_setup_hdd_create_partitions
253			setup_hdd_partitions_auto
254			fi
255			fi
256			}
257
258			dialog_setup_hdd_create_partitions()
259			{
260			dialog \
261			--backtitle "${TITLE}" \
262			--infobox "Erstelle Disk Partitionen ..." 3 70
263			}
264
265			dialog_setup_hdd_format()
266			{
267			dialog \
268			--backtitle "${TITLE}" \
269			--infobox "Erstelle Datei-Systeme ..." 3 70
270			}
271
272			dialog_install_settings()
273			{
274			dialog \
275			--backtitle "${TITLE}" \
276			--infobox "Speichere System-Einstellungen ..." 3 70
277			}
278
279			dialog_install_system_image()
280			{
281			dialog \
282			--backtitle "${TITLE}" \
283			--gauge "Kopiere System-Image ..." 6 80
284			}
285
286	niro	1294	dialog_install_initrd()
287			{
288			dialog \
289			--backtitle "${TITLE}" \
290			--infobox "Erstelle Initrd ..." 3 70
291			}
292
293	niro	1275	dialog_install_meter()
294			{
295			while [[ ${CURRENTLINE} != ${TOTALLINES} ]]
296			do
297			CURRENTLINE=$(grep -c . /tmp/install.log)
298			PERCENT=$(( ${CURRENTLINE} * 100 / ${TOTALLINES}))
299	niro	1294	echo "${PERCENT}"
300	niro	1275	sleep 1
301			done
302			rm -f /tmp/install.log
303			return 0
304			}
305
306			dialog_install_bootsector()
307			{
308			dialog \
309			--backtitle "${TITLE}" \
310			--infobox "Schreibe den Bootsektor ..." 3 70
311			}
312
313			dialog_install_successful()
314			{
315			dialog \
316			--backtitle "${TITLE}" \
317			--colors \
318			--msgbox "Die Installation war \Z2erfolgreich\Zn." 5 81
319			}
320
321			dialog_install_failure()
322			{
323			dialog \
324			--backtitle "${TITLE}" \
325			--colors \
326			--msgbox "Die Installation ist \Z1Fehlgeschlagen\Zn.\n\n\
327			Fehler bei ${ERROR}, RetVal: ${RETVAL} \
328			" 10 81
329			}
330
331			dialog_main()
332			{
333	niro	1294	local method=0
334			local retval
335	niro	1275
336	niro	1294	while [[ ${method} -le 2 ]]
337	niro	1275	do
338	niro	1294	method=$(dialog \
339	niro	1275	--backtitle "${TITLE}" \
340			--no-cancel \
341			--ok-label "Weiter" \
342			--stdout \
343			--menu "Konfiguration" 14 70 5 \
344	niro	1294	"1" "mCore installieren" \
345	niro	1275	"2" "Uebersicht gefundener Laufwerke" \
346			"3" "Beenden und neustarten" \
347			"4" "Beenden und eine Shell starten")
348	niro	1294	retval=$?
349			[[ ${retval} -eq 1 ]] && exit 1
350			if [[ ${retval} -eq 0 ]]
351	niro	1275	then
352	niro	1294	case ${method} in
353	niro	1275	"1") dialog_setup_system_menu ;;
354			"2") dialog_hardware_detection ;;
355			"3") install_do_reboot ;;
356	niro	1294	"4") clear;/bin/bash --login -i ;;
357	niro	1275	esac
358			fi
359			done
360			}
361
362			#################################################
363			# Install Komandos #
364			#################################################
365			run_hardware_detection()
366			{
367			# check for special devices/clients:
368	niro	1294	# if the device is a zotac and has a removeable device as boot disk,
369			# then add a rootdelay of 8 seconds to kernelcmd
370	niro	1275	local removable=0
371			if [[ ! -z $(lspci -v \| grep -i zotac) ]]
372			then
373			for i in /sys/block/[hs]d*/removable
374			do
375			if [[ $(< ${i}) = 1 ]]
376			then
377			removable=1
378			fi
379			done
380
381			export KERNELOPTS="${KERNELOPTS} rootdelay=8"
382			export SPECIALDEVICE="zotac"
383			fi
384			}
385
386	niro	1294	run_hardware_detection_disks()
387			{
388	niro	1606	local bootdev
389
390	niro	1294	# all disks but exclude ramdisks
391			export ALL_DISKS=$(get_hwinfo disk \| sed '/\/dev\/ram[0-9].*/d')
392	niro	1606	# remove the boot device from ALL_DISKS if it was an usbstick
393			if [[ $(grep '[[:space:]]/mnt/cdrom[[:space:]]' /proc/mounts \| cut -d' ' -f3) != iso9660 ]]
394			then
395			bootdev="$(grep '[[:space:]]/mnt/cdrom[[:space:]]' /proc/mounts \| cut -d' ' -f1 \| sed 's:[0-9]::g')"
396			export ALL_DISKS=$(echo "${ALL_DISKS}" \| grep -v "${bootdev}")
397			fi
398	niro	1294	export ALL_CDROMS="$(get_hwinfo cdrom)"
399			}
400
401	niro	1275	setup_hdd_partitions_auto()
402			{
403			ROOTHDD="${HDD}1"
404
405			## delete disk
406	niro	1294	dd if=/dev/zero of="${HDD}" count=1 &> /dev/null \|\| die
407	niro	1275
408			## setup one bootable partition
409			#1. n= new disk
410			#2. p= primary disk
411			#3. 1= first partition
412			#4. ''= default sector start
413			#5. ''= defaul sector end
414			#6. a= bootable flag
415			#7. 1= boot flag for partition 1
416			#8. w= write/quit
417	niro	1294	fdisk "${HDD}" &> /dev/null << EOF
418	niro	1275	n
419			p
420			1
421
422
423			a
424			1
425			w
426			EOF
427			}
428
429			setup_hdd_partitions_manuell()
430			{
431			ROOTHDD="${HDD}1"
432	niro	1294	cfdisk "${HDD}" \|\| die
433	niro	1275	}
434
435			setup_hdd_format()
436			{
437	niro	1294	mkfs."${FORMAT_FILESYSTEM}" -q "${ROOTHDD}" \|\| die
438	niro	1275	}
439
440			install_mount_rootfs()
441			{
442	niro	1294	mount "${ROOTHDD}" "${INSTALL_ROOT}" \|\| die
443			install -d ${INSTALL_ROOT}/boot \|\| die
444			cd ${INSTALL_ROOT} \|\| die
445	niro	1275	}
446
447			install_system_image()
448			{
449	niro	1294	tar xvjpf ${CDPATH}/system/${CDIMAGENAME} -C ${INSTALL_ROOT}
450	niro	1275	}
451
452	niro	1294	install_bootsector()
453	niro	1275	{
454	niro	1294	local uuid
455			local initrd
456			local kernelversion
457			local grubtitle
458			local chroot
459			local grubdisk
460			local CONFIG
461	niro	1275
462	niro	1294	# setup a proper boot device
463			if [[ -z ${BOOTHDD} ]]
464	niro	1275	then
465	niro	1294	grubdisk="${ROOTHDD}"
466			else
467			grubdisk="${BOOTHDD}"
468	niro	1275	fi
469
470	niro	1294	# first of all, create a device.map
471			create_device_map
472	niro	1275
473	niro	1294	# get kernelnames
474			initrd=/boot/$(readlink ${INSTALL_ROOT}/boot/initrd)
475			kernelversion=$(readlink ${INSTALL_ROOT}/boot/vmlinuz \| sed "s:kernel-::g")
476
477			# for mcore only
478			if [ -f ${INSTALL_ROOT}/etc/mcore_version ]
479	niro	1275	then
480	niro	1294	grubtitle="mCore-$(< ${INSTALL_ROOT}/etc/mcore_version) (${kernelversion})"
481	niro	1275	else
482	niro	1294	grubtitle="mCore (${kernelversion})"
483	niro	1275	fi
484
485	niro	1294	# uuid support
486			uuid=$(get_uuid "${ROOTHDD}")
487	niro	1275
488	niro	1294	CONFIG="${INSTALL_ROOT}/boot/grub/grub.conf"
489			clearconfig
490			addconfig 'default 0'
491			addconfig 'timeout 3'
492			if [[ -f ${INSTALL_ROOT}/boot/grub/splash.xpm.gz ]]
493	niro	1275	then
494	niro	1294	addconfig "splashimage $(convert_device ${grubdisk})/boot/grub/splash.xpm.gz"
495	niro	1275	fi
496	niro	1294	# using current root password
497			addconfig "password --md5 $(cat ${INSTALL_ROOT}/etc/shadow \| grep root \| cut -d: -f2)"
498			addconfig
499			addconfig '# normal boot'
500			addconfig "title ${grubtitle}"
501			addconfig "root $(convert_device ${grubdisk})"
502			addconfig "kernel /boot/kernel-${kernelversion} root=${uuid} ${KERNELOPTS}"
503			addconfig "initrd /boot/${initrd}"
504	niro	1275
505	niro	1294	[[ ! -z ${INSTALL_ROOT} ]] && chroot=chrooted
506
507			# update grub
508			${chroot} grub --batch --no-floppy &> /dev/null << EOF
509			root $(convert_device ${grubdisk})
510			setup $(convert_device ${grubdisk} \| sed "s:,[0-9]::")
511	niro	1275	quit
512			EOF
513
514	niro	1294	return 0
515	niro	1275	}
516
517	niro	1294	create_device_map()
518	niro	1275	{
519	niro	1294	local chroot
520
521			[[ ! -z ${INSTALL_ROOT} ]] && chroot=chrooted
522
523			# create device.map
524			${chroot} grub --batch --no-floppy --no-config-file --device-map=/boot/grub/device.map </dev/null &> /dev/null
525	niro	1275	}
526
527	niro	1294	convert_device()
528	niro	1275	{
529	niro	1294	local device="$1"
530			local root_part=
531	niro	1275
532	niro	1294	# extract device type (block) and major number for root drive
533			local major_minor=$(ls -Ll ${device} \| awk '{if ($6 < 64) printf("%c%d0", $1, $5); else printf("%c%d1", $1, $5)}')
534	niro	1275
535	niro	1294	# find the matching BIOS device
536			for bios_drive in $(grep -v '^#' ${INSTALL_ROOT}/boot/grub/device.map \| awk '{print $2}')
537			do
538			bios_major_minor=$(ls -Ll ${bios_drive} 2>/dev/null \| awk '{if ($6 < 64) printf("%c%d0", $1, $5); else printf("%c%d1", $1, $5)}')
539	niro	1275
540	niro	1294	if [[ ${major_minor} = ${bios_major_minor} ]]
541	niro	1275	then
542	niro	1294	# we found it
543			root_drive=$(grep ${bios_drive} ${INSTALL_ROOT}/boot/grub/device.map \| awk '{print $1}')
544			root_part=$(ls -Ll ${device} \| awk '{print $6}')
545			root_part=$(( ${root_part} % 16 - 1 ))
546			break
547	niro	1275	fi
548	niro	1294	done
549	niro	1275
550	niro	1294	drive=$(echo ${root_drive} \| sed "s:)$:,${root_part}):")
551			echo ${drive}
552	niro	1275	}
553
554	niro	1294	install_initrd()
555	niro	1275	{
556	niro	1294	local initrd
557			local kernelversion
558	niro	1275
559	niro	1294	initrd=/boot/$(readlink ${INSTALL_ROOT}/boot/initrd)
560			kernelversion=$(readlink ${INSTALL_ROOT}/boot/vmlinuz \| sed "s:kernel-::g")
561	niro	1275
562	niro	1294	create_initrd --initrd "${initrd}" --kernelversion "${kernelversion}" &> /dev/null
563	niro	1275	}
564
565			install_system_settings()
566			{
567	niro	1294	local CONFIG
568			local uuid
569
570	niro	1275	# schreibe fstab
571	niro	1294	uuid=$(get_uuid "${ROOTHDD}")
572			CONFIG="${INSTALL_ROOT}/etc/fstab"
573			clearconfig
574	niro	1660	addconfig -e "UUID=${uuid}\t/\t${FORMAT_FILESYSTEM}\tnoatime\t0 0"
575	niro	1294	addconfig -e "proc\t/proc\tproc\tdefaults\t0 0"
576			addconfig -e "shm\t/dev/shm\ttmpfs\tdefaults\t0 0"
577	niro	1275
578			# install network config skeleton
579	niro	1294	CONFIG="${INSTALL_ROOT}/etc/conf.d/net.eth0"
580			clearconfig
581			addconfig 'ONBOOT="yes"'
582			addconfig 'NETWORKING="dhcp"'
583	niro	1275	}
584
585			install_umount_rootfs()
586			{
587			cd /
588	niro	1294	umount ${INSTALL_ROOT} \|\| die
589	niro	1275	}
590
591			install_do_reboot()
592			{
593			reboot
594			}
595
596			#################################################
597			# Install Ablauf Scripte #
598			#################################################
599
600	niro	1294	addconfig()
601			{
602			local opts
603
604			if [[ -z ${CONFIG} ]]
605			then
606			echo "You must define \$CONFIG varibale first!"
607			return 1
608			fi
609
610			if [[ ! -d $(dirname ${CONFIG}) ]]
611			then
612			install -d $(dirname ${CONFIG})
613			fi
614
615			# check for opts
616			case $1 in
617			-n) shift; opts=" -n" ;;
618			-e) shift; opts=" -e" ;;
619			esac
620
621			echo ${opts} "$@" >> ${CONFIG}
622			}
623
624			clearconfig()
625			{
626			if [[ -z ${CONFIG} ]]
627			then
628			echo "You must define \$CONFIG varibale first!"
629			return 1
630			fi
631
632			if [[ ! -d $(dirname ${CONFIG}) ]]
633			then
634			install -d $(dirname ${CONFIG})
635			fi
636			: > ${CONFIG}
637			}
638
639	niro	1275	run_install_normal()
640			{
641			dialog_hardware_detection
642
643			dialog_setup_hdd_partitions_manuell
644			dialog_setup_hdd_format
645			setup_hdd_format > /dev/null
646			install_mount_rootfs
647			(install_system_image > /tmp/install.log) 2> /tmp/install_errors.log \| dialog_install_meter \| dialog_install_system_image
648
649			dialog_install_bootsector
650	niro	1294	install_bootsector
651	niro	1275
652			dialog_install_settings
653			sleep 1
654			install_system_settings
655	niro	1294	dialog_install_initrd
656			install_initrd
657	niro	1275	install_umount_rootfs
658			dialog_install_successful
659			}
660
661			run_install_auto()
662			{
663			dialog_hardware_detection
664
665			dialog_setup_hdd_partitions_auto
666			dialog_setup_hdd_format
667	niro	1294	setup_hdd_format > /dev/null
668			install_mount_rootfs
669	niro	1275	(install_system_image > /tmp/install.log) 2> /tmp/install_errors.log \| dialog_install_meter \| dialog_install_system_image
670
671			dialog_install_bootsector
672	niro	1294	install_bootsector
673	niro	1275
674			dialog_install_settings
675			sleep 1
676	niro	1294	install_system_settings
677			dialog_install_initrd
678			install_initrd
679			install_umount_rootfs
680	niro	1275	dialog_install_successful
681			}
682
683			dialog_main
684
685			exit 0