mcore-tools/dracut/module-setup.sh

#!/bin/sh

check() {
	local _program
	. $dracutfunctions

	for _program in ifconfig ip route udhcpc xml; do
		if ! type -P $_program >/dev/null; then
			derror "Could not find program \"$_program\" required by mcored."
			return 1
		fi
	done

	return 255
}

depends() {
	return 0
}

installkernel() {
	net_module_filter() {
		local _net_drivers='eth_type_trans|register_virtio_device'
		local _unwanted_drivers='/(isdn|uwb)/'
		local _ret
		# subfunctions inherit following FDs
		local _merge=8 _side2=9
		function nmf1() {
			local _fname _fcont
			while read _fname; do
				[[ $_fname =~ $_unwanted_drivers ]] && continue
				case "$_fname" in
					*.ko)    _fcont="$(<        $_fname)" ;;
					*.ko.gz) _fcont="$(gzip -dc $_fname)" ;;
					*.ko.xz) _fcont="$(xz -dc   $_fname)" ;;
				esac
				[[   $_fcont =~ $_net_drivers
				&& ! $_fcont =~ iw_handler_get_spy ]] \
				&& echo "$_fname"
			done
		}
		function rotor() {
			local _f1 _f2
			while read _f1; do
				echo "$_f1"
				if read _f2; then
					echo "$_f2" 1>&${_side2}
				fi
			done | nmf1 1>&${_merge}
		}
		# Use two parallel streams to filter alternating modules.
		set +x
		eval "( ( rotor ) ${_side2}>&1 | nmf1 ) ${_merge}>&1"
		_ret=$?
		[[ $debug ]] && set -x
		return $_ret
	}

	{ find_kernel_modules_by_path drivers/net; find_kernel_modules_by_path drivers/s390/net; } \
		| net_module_filter | instmods

	instmods =drivers/net/phy
	instmods ecb arc4
	# bridge modules
	instmods bridge stp llc
	instmods ipv6
	# bonding
	instmods bonding
	# vlan
	instmods 8021q
}

install() {
	local __file

	# add lp usr/group
	egrep '^lp:' /etc/passwd >> "$initdir/etc/passwd"
	# group file is fully included atm
	#egrep '^lp:' /etc/group >> "$initdir/etc/group"

	# networking stuff
	dracut_install ifconfig ip route udhcpc iwconfig wpa_supplicant
	inst /usr/share/udhcpc/default.script

	# mcored config stuff
	dracut_install hwinfo vncpasswd xml

	# mcored
	# install all busybox modules
	dracut_install busybox
	for __file in $(cat /usr/share/busybox/busybox.links)
	do
		inst_symlink ${__file}
	done
	# install things which are needed but not provided by our busybox
	dracut_install find install sslsvd touch
	inst /etc/mageversion
	inst /etc/conf.d/network
	inst /etc/ssl/certs/mcored.pem
	inst /etc/ssl/private/mcored.key
	inst_dir /var/lib/mcored
	inst /etc/conf.d/mcored
	inst /etc/mcore/config.rc
	inst /etc/mcoredpasswd
	for __file in $(find /usr/lib/mcored/include -type f)
	do
	inst ${__file}
	done
	inst /usr/lib/mcored/mcored
	inst /usr/lib/mcored/mcore-generate-certificate
	inst /usr/lib/mcored/mcorepasswd
	inst /usr/lib/mcored/start-daemon.sh
	inst /usr/lib/mcored/VERSION
	inst_symlink /usr/sbin/mcored
	inst_symlink /usr/bin/mcorepasswd

	inst_hook pre-pivot 90 "$moddir"/run-mcored.sh
}
1	#!/bin/sh
2
3	check() {
4	local _program
5	. $dracutfunctions
6
7	for _program in ifconfig ip route udhcpc xml; do
8	if ! type -P $_program >/dev/null; then
9	derror "Could not find program \"$_program\" required by mcored."
10	return 1
11	fi
12	done
13
14	return 255
15	}
16
17	depends() {
18	return 0
19	}
20
21	installkernel() {
22	net_module_filter() {
23	local _net_drivers='eth_type_trans\|register_virtio_device'
24	local _unwanted_drivers='/(isdn\|uwb)/'
25	local _ret
26	# subfunctions inherit following FDs
27	local _merge=8 _side2=9
28	function nmf1() {
29	local _fname _fcont
30	while read _fname; do
31	[[ $_fname =~ $_unwanted_drivers ]] && continue
32	case "$_fname" in
33	*.ko) _fcont="$(< $_fname)" ;;
34	*.ko.gz) _fcont="$(gzip -dc $_fname)" ;;
35	*.ko.xz) _fcont="$(xz -dc $_fname)" ;;
36	esac
37	[[ $_fcont =~ $_net_drivers
38	&& ! $_fcont =~ iw_handler_get_spy ]] \
39	&& echo "$_fname"
40	done
41	}
42	function rotor() {
43	local _f1 _f2
44	while read _f1; do
45	echo "$_f1"
46	if read _f2; then
47	echo "$_f2" 1>&${_side2}
48	fi
49	done \| nmf1 1>&${_merge}
50	}
51	# Use two parallel streams to filter alternating modules.
52	set +x
53	eval "( ( rotor ) ${_side2}>&1 \| nmf1 ) ${_merge}>&1"
54	_ret=$?
55	[[ $debug ]] && set -x
56	return $_ret
57	}
58
59	{ find_kernel_modules_by_path drivers/net; find_kernel_modules_by_path drivers/s390/net; } \
60	\| net_module_filter \| instmods
61
62	instmods =drivers/net/phy
63	instmods ecb arc4
64	# bridge modules
65	instmods bridge stp llc
66	instmods ipv6
67	# bonding
68	instmods bonding
69	# vlan
70	instmods 8021q
71	}
72
73	install() {
74	local __file
75
76	# add lp usr/group
77	egrep '^lp:' /etc/passwd >> "$initdir/etc/passwd"
78	# group file is fully included atm
79	#egrep '^lp:' /etc/group >> "$initdir/etc/group"
80
81	# networking stuff
82	dracut_install ifconfig ip route udhcpc iwconfig wpa_supplicant
83	inst /usr/share/udhcpc/default.script
84
85	# mcored config stuff
86	dracut_install hwinfo vncpasswd xml
87
88	# mcored
89	# install all busybox modules
90	dracut_install busybox
91	for __file in $(cat /usr/share/busybox/busybox.links)
92	do
93	inst_symlink ${__file}
94	done
95	# install things which are needed but not provided by our busybox
96	dracut_install find install sslsvd touch
97	inst /etc/mageversion
98	inst /etc/conf.d/network
99	inst /etc/ssl/certs/mcored.pem
100	inst /etc/ssl/private/mcored.key
101	inst_dir /var/lib/mcored
102	inst /etc/conf.d/mcored
103	inst /etc/mcore/config.rc
104	inst /etc/mcoredpasswd
105	for __file in $(find /usr/lib/mcored/include -type f)
106	do
107	inst ${__file}
108	done
109	inst /usr/lib/mcored/mcored
110	inst /usr/lib/mcored/mcore-generate-certificate
111	inst /usr/lib/mcored/mcorepasswd
112	inst /usr/lib/mcored/start-daemon.sh
113	inst /usr/lib/mcored/VERSION
114	inst_symlink /usr/sbin/mcored
115	inst_symlink /usr/bin/mcorepasswd
116
117	inst_hook pre-pivot 90 "$moddir"/run-mcored.sh
118	}