modules/basic-video/graphic.client.class.in

# $Id$

provide basic-video

# todo monitor gfxcard
helper_graphic_add_configs()
{
	local path="$1"
	local conf

	# exit ERR if path does not exist
	[[ ! -d ${path} ]] && return 1

	for conf in $(find "${path}" -mindepth 1 -maxdepth 1 -type f -name \*.conf | sort)
	do
		cat "${conf}" >> "${CONFIG}"
	done
}

# everything from xorg conf but inputdevices. they are handled properly trough udev!
helper_graphic_rebuild_xorg_conf_d()
{
	local CONFIG
	local conf
	local boardvendor
	local write_zotac_quirk

	# rebuild 25-gfxcard.conf
	# always clear the config
	CONFIG="${MROOT}@@SYSCONFDIR@@/X11/xorg.conf.d/25-device.conf"
	clearconfig
	addconfig "# Autogenerated by mcored" 
	# but only add lines if some values are found in config.d dir
	if path_not_empty ${MROOT}/${MCORE_CONFIG_PATH}/xorg/device
	then
		addconfig 'Section "Device"'
		helper_graphic_add_configs ${MROOT}/${MCORE_CONFIG_PATH}/xorg/device
		addconfig 'EndSection'
	fi

	# rebuild 25-module.conf
	# always clear the config
	CONFIG="${MROOT}@@SYSCONFDIR@@/X11/xorg.conf.d/25-module.conf"
	clearconfig
	addconfig "# Autogenerated by mcored" 
	# but only add lines if some values are found in config.d dir
	if path_not_empty ${MROOT}/${MCORE_CONFIG_PATH}/xorg/module
	then
		addconfig 'Section "Module"'
		helper_graphic_add_configs ${MROOT}/${MCORE_CONFIG_PATH}/xorg/module
		addconfig 'EndSection'
	fi

	# rebuild 25-screen.conf
	# always clear the config
	CONFIG="${MROOT}@@SYSCONFDIR@@/X11/xorg.conf.d/25-screen.conf"
	clearconfig
	addconfig "# Autogenerated by mcored" 
	# but only add lines if some values are found in config.d dir
	if path_not_empty ${MROOT}/${MCORE_CONFIG_PATH}/xorg/screen
	then
		addconfig 'Section "Screen"'
		addconfig '	Identifier	"Screen0"'
		addconfig '	Monitor		"Monitor0"'
		helper_graphic_add_configs ${MROOT}/${MCORE_CONFIG_PATH}/xorg/screen
		addconfig 'EndSection'
	fi

	# always disable hdmi port on zotac devices atm - fixme make it configurable like alx
	CONFIG="${MROOT}@@SYSCONFDIR@@/X11/xorg.conf.d/30-fix-zotac.conf"
	clearconfig
	write_zotac_quirk=0
	if [ -e /sys/devices/virtual/dmi/id/board_vendor ]
	then
		boardvendor="$(< /sys/devices/virtual/dmi/id/board_vendor)"
		# decapitalize
		boardvendor="${boardvendor,,}"
		case ${boardvendor} in
			*zotac*) write_zotac_quirk=1 ;;
		esac
	fi
	# some zotacs has as the board_vendor "filled by o.e.m"
	# so we search the whole devices subtree for zotac vendor matches
	# 0x19da="ZOTAC International (MCO) Ltd."
	if [[ -n $(cat /sys/devices/*/*/subsystem_vendor  | grep 0x19da) ]]
	then
		write_zotac_quirk=1
	fi
	if [[ ${write_zotac_quirk} = 1 ]]
	then
		addconfig "# Autogenerated by mcored" 
		addconfig "Section \"Monitor\""
		addconfig "	Identifier \"LVDS1\""
		addconfig "	Option \"Ignore\" \"True\""
		addconfig "EndSection"
	fi
}

help_graphic_resolution()
{
	mecho "set graphic.resolution [resolution]"
	mecho " auto, 800x600, 1024x768, 1280x1024 etc"
}

help_graphic_refresh()
{
	mecho "set graphic.refresh [refresh rate]"
	mecho "  auto, 60, 100 - all values are Hz"
}

help_graphic_depth()
{
	mecho "set graphic.depth [color-depth]"
	mecho "  auto, 1, 4, 8, 15, 16, 24 - all values are bits"
}

help_graphic_driver()
{
	mecho "get graphic.driver [action]"
	mecho " Shows current selected or system available graphic drivers."
	mecho " Available actions:"
	mecho "   system  - show available drivers on the system"
	mecho "   current - shows the current selected driver used by Xorg"
	mecho
	mecho "set graphic.driver [driver]"
	mecho " Selects the graphic card driver used by Xorg."
}

# set_graphic_resolution ${value}
set_graphic_resolution()
{
	local resolution="${CLASS_ARGV[0]}"
	local CONFIG
	local depth
	[[ -z ${resolution} ]] && help_graphic_resolution && return 1

	CONFIG="${MROOT}/${MCORE_CONFIG_PATH}/xorg/screen/20-resolution.conf"

	case ${resolution} in
		*x*)
			clearconfig
			# do it for all supported color depth
			for depth in 1 4 8 15 16 24
			do
				addconfig '	SubSection "Display"'
				addconfig "		Depth	${depth}"
				addconfig "		Modes	\"${resolution}\""
				addconfig '		ViewPort 0 0'
				addconfig '	EndSubSection'
			done

			if [[ -z ${MROOT} ]] || [[ ${MROOT} = / ]]
			then
				x11runas "xrandr --size ${resolution}"
			fi
			;;
		auto) clearconfig ;;
	esac

	helper_graphic_rebuild_xorg_conf_d
}

# set_graphic_depth ${value}
set_graphic_depth()
{
	local depth="${CLASS_ARGV[0]}"
	local CONFIG
	[[ -z ${depth} ]] && help_graphic_depth && return 1

	CONFIG="${MROOT}/${MCORE_CONFIG_PATH}/xorg/screen/10-depth.conf"

	# do it only for supported color depths
	case "${depth}" in
		1|4|8|15|16|24)
			clearconfig
			addconfig "	DefaultDepth	${depth}"
			;;
		auto) clearconfig ;;
		*) help_graphic_depth && return 1 ;;
	esac

	helper_graphic_rebuild_xorg_conf_d
	if [[ -z ${MROOT} ]] || [[ ${MROOT} = / ]]
	then
		mecho "X11 restart required!"
	fi
}

# set_graphic_refresh ${value}
set_graphic_refresh()
{
	local value="${CLASS_ARGV[0]}"
	[[ -z ${value} ]] && help_graphic_refresh && return 1

	#echo "${value}" > ${MROOT}/${MCORE_CONFIG_PATH}/xorg/refresh

	if [[ -z ${MROOT} ]] || [[ ${MROOT} = / ]]
	then
		x11runas "xrandr --refresh ${value}"
	fi

	helper_graphic_rebuild_xorg_conf_d
}

set_graphic_driver()
{
	local driver="${CLASS_ARGV[0]}"
	local driverdir="@@LIBDIR@@/xorg/modules/drivers"
	local CONFIG
	[[ -z ${driver} ]] && help_graphic_driver && return 1

	if [[ ${driver} = auto ]]
	then
		decho "Using driver autodetection, doing nothing"
	elif [[ -f ${MROOT}/${driverdir}/${driver}_drv.so ]]
	then
		CONFIG="${MROOT}/${MCORE_CONFIG_PATH}/xorg/device/25-device.conf"
		clearconfig
		addconfig "	Identifier \"Card0\""
		addconfig "	Driver	\"${driver}\""

		helper_graphic_rebuild_xorg_conf_d
		if [[ -z ${MROOT} ]] || [[ ${MROOT} = / ]]
		then
			mecho "X11 restart required!"
		fi
	else
		eecho "Driver '${driver}' does not exist on this system. Aborted!"
	fi
}

get_graphic_driver()
{
	local action="${CLASS_ARGV[0]}"
	local driverdir="@@LIBDIR@@/xorg/modules/drivers"
	local driver
	local config="${MCORE_CONFIG_PATH}/xorg/device/25-device.conf"
	local i

	case "${action}" in
		current)
			if [[ -f ${MROOT}/${config} ]]
			then
				driver=$(grep Driver "${MROOT}/${config}" | sed 's:.*Driver.*\"\(.*\)\":\1:')
				rvecho "${driver}"
			else
				rvecho "none"
			fi
			;;
		system)
			driver=$(list_files_in_directory ${MROOT}/${driverdir} -mindepth 1 -maxdepth 1 | sed s':_drv.so::g')
			rvecho "${driver}"
			;;
		*)
			help_graphic_driver
			return 1
			;;
	esac
}
1	# $Id$
2
3	provide basic-video
4
5	# todo monitor gfxcard
6	helper_graphic_add_configs()
7	{
8	local path="$1"
9	local conf
10
11	# exit ERR if path does not exist
12	[[ ! -d ${path} ]] && return 1
13
14	for conf in $(find "${path}" -mindepth 1 -maxdepth 1 -type f -name \*.conf \| sort)
15	do
16	cat "${conf}" >> "${CONFIG}"
17	done
18	}
19
20	# everything from xorg conf but inputdevices. they are handled properly trough udev!
21	helper_graphic_rebuild_xorg_conf_d()
22	{
23	local CONFIG
24	local conf
25	local boardvendor
26	local write_zotac_quirk
27
28	# rebuild 25-gfxcard.conf
29	# always clear the config
30	CONFIG="${MROOT}@@SYSCONFDIR@@/X11/xorg.conf.d/25-device.conf"
31	clearconfig
32	addconfig "# Autogenerated by mcored"
33	# but only add lines if some values are found in config.d dir
34	if path_not_empty ${MROOT}/${MCORE_CONFIG_PATH}/xorg/device
35	then
36	addconfig 'Section "Device"'
37	helper_graphic_add_configs ${MROOT}/${MCORE_CONFIG_PATH}/xorg/device
38	addconfig 'EndSection'
39	fi
40
41	# rebuild 25-module.conf
42	# always clear the config
43	CONFIG="${MROOT}@@SYSCONFDIR@@/X11/xorg.conf.d/25-module.conf"
44	clearconfig
45	addconfig "# Autogenerated by mcored"
46	# but only add lines if some values are found in config.d dir
47	if path_not_empty ${MROOT}/${MCORE_CONFIG_PATH}/xorg/module
48	then
49	addconfig 'Section "Module"'
50	helper_graphic_add_configs ${MROOT}/${MCORE_CONFIG_PATH}/xorg/module
51	addconfig 'EndSection'
52	fi
53
54	# rebuild 25-screen.conf
55	# always clear the config
56	CONFIG="${MROOT}@@SYSCONFDIR@@/X11/xorg.conf.d/25-screen.conf"
57	clearconfig
58	addconfig "# Autogenerated by mcored"
59	# but only add lines if some values are found in config.d dir
60	if path_not_empty ${MROOT}/${MCORE_CONFIG_PATH}/xorg/screen
61	then
62	addconfig 'Section "Screen"'
63	addconfig ' Identifier "Screen0"'
64	addconfig ' Monitor "Monitor0"'
65	helper_graphic_add_configs ${MROOT}/${MCORE_CONFIG_PATH}/xorg/screen
66	addconfig 'EndSection'
67	fi
68
69	# always disable hdmi port on zotac devices atm - fixme make it configurable like alx
70	CONFIG="${MROOT}@@SYSCONFDIR@@/X11/xorg.conf.d/30-fix-zotac.conf"
71	clearconfig
72	write_zotac_quirk=0
73	if [ -e /sys/devices/virtual/dmi/id/board_vendor ]
74	then
75	boardvendor="$(< /sys/devices/virtual/dmi/id/board_vendor)"
76	# decapitalize
77	boardvendor="${boardvendor,,}"
78	case ${boardvendor} in
79	zotac) write_zotac_quirk=1 ;;
80	esac
81	fi
82	# some zotacs has as the board_vendor "filled by o.e.m"
83	# so we search the whole devices subtree for zotac vendor matches
84	# 0x19da="ZOTAC International (MCO) Ltd."
85	if [[ -n $(cat /sys/devices///subsystem_vendor \| grep 0x19da) ]]
86	then
87	write_zotac_quirk=1
88	fi
89	if [[ ${write_zotac_quirk} = 1 ]]
90	then
91	addconfig "# Autogenerated by mcored"
92	addconfig "Section \"Monitor\""
93	addconfig " Identifier \"LVDS1\""
94	addconfig " Option \"Ignore\" \"True\""
95	addconfig "EndSection"
96	fi
97	}
98
99	help_graphic_resolution()
100	{
101	mecho "set graphic.resolution [resolution]"
102	mecho " auto, 800x600, 1024x768, 1280x1024 etc"
103	}
104
105	help_graphic_refresh()
106	{
107	mecho "set graphic.refresh [refresh rate]"
108	mecho " auto, 60, 100 - all values are Hz"
109	}
110
111	help_graphic_depth()
112	{
113	mecho "set graphic.depth [color-depth]"
114	mecho " auto, 1, 4, 8, 15, 16, 24 - all values are bits"
115	}
116
117	help_graphic_driver()
118	{
119	mecho "get graphic.driver [action]"
120	mecho " Shows current selected or system available graphic drivers."
121	mecho " Available actions:"
122	mecho " system - show available drivers on the system"
123	mecho " current - shows the current selected driver used by Xorg"
124	mecho
125	mecho "set graphic.driver [driver]"
126	mecho " Selects the graphic card driver used by Xorg."
127	}
128
129	# set_graphic_resolution ${value}
130	set_graphic_resolution()
131	{
132	local resolution="${CLASS_ARGV[0]}"
133	local CONFIG
134	local depth
135	[[ -z ${resolution} ]] && help_graphic_resolution && return 1
136
137	CONFIG="${MROOT}/${MCORE_CONFIG_PATH}/xorg/screen/20-resolution.conf"
138
139	case ${resolution} in
140	x)
141	clearconfig
142	# do it for all supported color depth
143	for depth in 1 4 8 15 16 24
144	do
145	addconfig ' SubSection "Display"'
146	addconfig " Depth ${depth}"
147	addconfig " Modes \"${resolution}\""
148	addconfig ' ViewPort 0 0'
149	addconfig ' EndSubSection'
150	done
151
152	if [[ -z ${MROOT} ]] \|\| [[ ${MROOT} = / ]]
153	then
154	x11runas "xrandr --size ${resolution}"
155	fi
156	;;
157	auto) clearconfig ;;
158	esac
159
160	helper_graphic_rebuild_xorg_conf_d
161	}
162
163	# set_graphic_depth ${value}
164	set_graphic_depth()
165	{
166	local depth="${CLASS_ARGV[0]}"
167	local CONFIG
168	[[ -z ${depth} ]] && help_graphic_depth && return 1
169
170	CONFIG="${MROOT}/${MCORE_CONFIG_PATH}/xorg/screen/10-depth.conf"
171
172	# do it only for supported color depths
173	case "${depth}" in
174	1\|4\|8\|15\|16\|24)
175	clearconfig
176	addconfig " DefaultDepth ${depth}"
177	;;
178	auto) clearconfig ;;
179	*) help_graphic_depth && return 1 ;;
180	esac
181
182	helper_graphic_rebuild_xorg_conf_d
183	if [[ -z ${MROOT} ]] \|\| [[ ${MROOT} = / ]]
184	then
185	mecho "X11 restart required!"
186	fi
187	}
188
189	# set_graphic_refresh ${value}
190	set_graphic_refresh()
191	{
192	local value="${CLASS_ARGV[0]}"
193	[[ -z ${value} ]] && help_graphic_refresh && return 1
194
195	#echo "${value}" > ${MROOT}/${MCORE_CONFIG_PATH}/xorg/refresh
196
197	if [[ -z ${MROOT} ]] \|\| [[ ${MROOT} = / ]]
198	then
199	x11runas "xrandr --refresh ${value}"
200	fi
201
202	helper_graphic_rebuild_xorg_conf_d
203	}
204
205	set_graphic_driver()
206	{
207	local driver="${CLASS_ARGV[0]}"
208	local driverdir="@@LIBDIR@@/xorg/modules/drivers"
209	local CONFIG
210	[[ -z ${driver} ]] && help_graphic_driver && return 1
211
212	if [[ ${driver} = auto ]]
213	then
214	decho "Using driver autodetection, doing nothing"
215	elif [[ -f ${MROOT}/${driverdir}/${driver}_drv.so ]]
216	then
217	CONFIG="${MROOT}/${MCORE_CONFIG_PATH}/xorg/device/25-device.conf"
218	clearconfig
219	addconfig " Identifier \"Card0\""
220	addconfig " Driver \"${driver}\""
221
222	helper_graphic_rebuild_xorg_conf_d
223	if [[ -z ${MROOT} ]] \|\| [[ ${MROOT} = / ]]
224	then
225	mecho "X11 restart required!"
226	fi
227	else
228	eecho "Driver '${driver}' does not exist on this system. Aborted!"
229	fi
230	}
231
232	get_graphic_driver()
233	{
234	local action="${CLASS_ARGV[0]}"
235	local driverdir="@@LIBDIR@@/xorg/modules/drivers"
236	local driver
237	local config="${MCORE_CONFIG_PATH}/xorg/device/25-device.conf"
238	local i
239
240	case "${action}" in
241	current)
242	if [[ -f ${MROOT}/${config} ]]
243	then
244	driver=$(grep Driver "${MROOT}/${config}" \| sed 's:.Driver.\"\(.*\)\":\1:')
245	rvecho "${driver}"
246	else
247	rvecho "none"
248	fi
249	;;
250	system)
251	driver=$(list_files_in_directory ${MROOT}/${driverdir} -mindepth 1 -maxdepth 1 \| sed s':_drv.so::g')
252	rvecho "${driver}"
253	;;
254	*)
255	help_graphic_driver
256	return 1
257	;;
258	esac
259	}