diff -Naur dracut-045/50-dracut.install dracut-045-busybox/50-dracut.install
--- dracut-045/50-dracut.install	2017-04-03 10:26:25.000000000 +0200
+++ dracut-045-busybox/50-dracut.install	2017-04-04 14:42:58.434257706 +0200
@@ -12,7 +12,7 @@
         if [[ -f ${INITRD_IMAGE_PREGENERATED} ]]; then
             # we found an initrd at the same place as the kernel
             # use this and don't generate a new one
-            cp --reflink=auto "$INITRD_IMAGE_PREGENERATED" "$BOOT_DIR_ABS/initrd" \
+            cp "$INITRD_IMAGE_PREGENERATED" "$BOOT_DIR_ABS/initrd" \
                 && chown root:root "$BOOT_DIR_ABS/initrd" \
                 && chmod 0600 "$BOOT_DIR_ABS/initrd" \
                 && exit 0
diff -Naur dracut-045/51-dracut-rescue.install dracut-045-busybox/51-dracut-rescue.install
--- dracut-045/51-dracut-rescue.install	2017-04-03 10:26:25.000000000 +0200
+++ dracut-045-busybox/51-dracut-rescue.install	2017-04-04 14:45:14.468616117 +0200
@@ -18,7 +18,7 @@
                 [[ -f $i ]] && echo ${i##*/}
             done
             shift
-        done | sort -Vu
+        done | sort -u
     )
 
     for f in $files; do
@@ -78,7 +78,7 @@
 
         [[ -d "$BOOT_DIR_ABS" ]] || mkdir -p "$BOOT_DIR_ABS"
 
-        if ! cp --reflink=auto "$KERNEL_IMAGE" "$BOOT_DIR_ABS"/linux; then
+        if ! cp "$KERNEL_IMAGE" "$BOOT_DIR_ABS"/linux; then
             echo "Can't copy '$KERNEL_IMAGE to '$BOOT_DIR_ABS/linux'!" >&2
         fi
 
diff -Naur dracut-045/51-dracut-rescue-postinst.sh dracut-045-busybox/51-dracut-rescue-postinst.sh
--- dracut-045/51-dracut-rescue-postinst.sh	2017-04-03 10:26:25.000000000 +0200
+++ dracut-045-busybox/51-dracut-rescue-postinst.sh	2017-04-04 14:46:00.620061393 +0200
@@ -31,7 +31,7 @@
                 [[ -f $i ]] && echo ${i##*/}
             done
             shift
-        done | sort -Vu
+        done | sort -u
     )
 
     for f in $files; do
@@ -57,7 +57,7 @@
 fi
 
 if [[ ! -f $NEW_KERNEL_IMAGE ]]; then
-    cp --reflink=auto "$KERNEL_IMAGE" "$NEW_KERNEL_IMAGE"
+    cp "$KERNEL_IMAGE" "$NEW_KERNEL_IMAGE"
     ((ret+=$?))
 fi
 
diff -Naur dracut-045/dracut-init.sh dracut-045-busybox/dracut-init.sh
--- dracut-045/dracut-init.sh	2017-04-03 10:26:25.000000000 +0200
+++ dracut-045-busybox/dracut-init.sh	2017-04-04 14:53:07.840962042 +0200
@@ -20,9 +20,9 @@
 export LC_MESSAGES=C
 
 if [[ "$EUID" = "0" ]]; then
-    export DRACUT_CP="cp --reflink=auto --sparse=auto --preserve=mode,timestamps,xattr,links -dfr"
+    export DRACUT_CP="cp -dfrp"
 else
-    export DRACUT_CP="cp --reflink=auto --sparse=auto --preserve=mode,timestamps,links -dfr"
+    export DRACUT_CP="cp -dfrp"
 fi
 
 # is_func <command>
@@ -1006,7 +1006,7 @@
     return $_ret
 }
 
-if [[ "$(ln --help)" == *--relative* ]]; then
+if [[ "$(ln --help &> /dev/null)" == *--relative* ]]; then
     ln_r() {
         ln -sfnr "${initdir}/$1" "${initdir}/$2"
     }
diff -Naur dracut-045/dracut.sh dracut-045-busybox/dracut.sh
--- dracut-045/dracut.sh	2017-04-03 10:26:25.000000000 +0200
+++ dracut-045-busybox/dracut.sh	2017-04-04 16:57:56.773680048 +0200
@@ -262,7 +262,7 @@
                 printf "%s\n" "${i##*/}"
             fi
         done
-    done | sort -Vu | {
+    done | sort -u | {
         readarray -t files
 
         for f in "${files[@]}"; do
@@ -1557,11 +1557,11 @@
                     object_destdir=${destdir}/${objectname#$src/}
                     if ! [[ -e "$object_destdir" ]]; then
                         mkdir -m 0755 -p "$object_destdir"
-                        chmod --reference="$objectname" "$object_destdir"
+                        chmod $(stat -c %a "$objectname") "$object_destdir"
                     fi
-                    $DRACUT_CP -t "$object_destdir" "$objectname"/*
+                    $DRACUT_CP "$objectname"/* "$object_destdir"
                 else
-                    $DRACUT_CP -t "$destdir" "$objectname"
+                    $DRACUT_CP "$objectname" "$destdir"
                 fi
             done
         fi
@@ -1783,7 +1783,7 @@
            --add-section .linux="$kernel_image" --change-section-vma .linux=0x40000 \
            --add-section .initrd="${DRACUT_TMPDIR}/initramfs.img" --change-section-vma .initrd=0x3000000 \
            "$uefi_stub" "${uefi_outdir}/linux.efi" \
-            && cp --reflink=auto "${uefi_outdir}/linux.efi" "$outfile"; then
+            && cp "${uefi_outdir}/linux.efi" "$outfile"; then
         dinfo "*** Creating UEFI image file '$outfile' done ***"
     else
         rm -f -- "$outfile"
@@ -1791,7 +1791,7 @@
         exit 1
     fi
 else
-    if cp --reflink=auto "${DRACUT_TMPDIR}/initramfs.img" "$outfile"; then
+    if cp "${DRACUT_TMPDIR}/initramfs.img" "$outfile"; then
         dinfo "*** Creating initramfs image file '$outfile' done ***"
     else
         rm -f -- "$outfile"
diff -Naur dracut-045/install/dracut-install.c dracut-045-busybox/install/dracut-install.c
--- dracut-045/install/dracut-install.c	2017-04-03 10:26:25.000000000 +0200
+++ dracut-045-busybox/install/dracut-install.c	2017-04-04 14:56:27.200596937 +0200
@@ -301,10 +301,10 @@
         pid = fork();
         if (pid == 0) {
                 if (geteuid() == 0)
-                        execlp("cp", "cp", "--reflink=auto", "--sparse=auto", "--preserve=mode,xattr,timestamps", "-fL", src, dst,
+                        execlp("cp", "cp", "-pfL", src, dst,
                                NULL);
                 else
-                        execlp("cp", "cp", "--reflink=auto", "--sparse=auto", "--preserve=mode,timestamps", "-fL", src, dst,
+                        execlp("cp", "cp", "-pfL", src, dst,
                                NULL);
                 _exit(EXIT_FAILURE);
         }
@@ -313,10 +313,10 @@
                 if (errno != EINTR) {
                         ret = -1;
                         if (geteuid() == 0)
-                                log_error("Failed: cp --reflink=auto --sparse=auto --preserve=mode,xattr,timestamps -fL %s %s", src,
+                                log_error("Failed: cp -pfL %s %s", src,
                                           dst);
                         else
-                                log_error("Failed: cp --reflink=auto --sparse=auto --preserve=mode,timestamps -fL %s %s", src,
+                                log_error("Failed: cp -pfL %s %s", src,
                                           dst);
                         break;
                 }
diff -Naur dracut-045/modules.d/10i18n/module-setup.sh dracut-045-busybox/modules.d/10i18n/module-setup.sh
--- dracut-045/modules.d/10i18n/module-setup.sh	2017-04-03 10:26:25.000000000 +0200
+++ dracut-045-busybox/modules.d/10i18n/module-setup.sh	2017-04-04 17:04:08.430627818 +0200
@@ -115,7 +115,7 @@
 
         for _src in $(eval echo ${kbddir}/{${KBDSUBDIRS}}); do
             inst_dir "$_src"
-            $DRACUT_CP -L -t "${initdir}/${_src}" "$_src"/*
+            $DRACUT_CP -L "$_src"/* "${initdir}/${_src}"
         done
 
         # remove unnecessary files
diff -Naur dracut-045/modules.d/45url-lib/module-setup.sh dracut-045-busybox/modules.d/45url-lib/module-setup.sh
--- dracut-045/modules.d/45url-lib/module-setup.sh	2017-04-03 10:26:25.000000000 +0200
+++ dracut-045-busybox/modules.d/45url-lib/module-setup.sh	2017-04-04 16:54:36.633879291 +0200
@@ -29,7 +29,7 @@
 	[[ -d $_dir ]] || continue
         for _lib in $_dir/libcurl.so.*; do
 	    [[ -e $_lib ]] || continue
-            _crt=$(grep -F --binary-files=text -z .crt $_lib)
+            _crt=$(grep -F .crt $_lib)
             [[ $_crt ]] || continue
             [[ $_crt == /*/* ]] || continue
             if ! inst "$_crt"; then
diff -Naur dracut-045/modules.d/95terminfo/module-setup.sh dracut-045-busybox/modules.d/95terminfo/module-setup.sh
--- dracut-045/modules.d/95terminfo/module-setup.sh	2017-04-03 10:26:25.000000000 +0200
+++ dracut-045-busybox/modules.d/95terminfo/module-setup.sh	2017-04-04 17:03:40.130935364 +0200
@@ -11,7 +11,7 @@
     if [ -d ${_terminfodir} ]; then
         for i in "l/linux" "v/vt100" "v/vt102" "v/vt220"; do
             inst_dir "$_terminfodir/${i%/*}"
-            $DRACUT_CP -L -t "${initdir}/${_terminfodir}/${i%/*}" "$_terminfodir/$i"
+            $DRACUT_CP -L "$_terminfodir/$i" "${initdir}/${_terminfodir}/${i%/*}"
         done
     fi
 }
diff -Naur dracut-045/modules.d/99base/dracut-lib.sh dracut-045-busybox/modules.d/99base/dracut-lib.sh
--- dracut-045/modules.d/99base/dracut-lib.sh	2017-04-03 10:26:25.000000000 +0200
+++ dracut-045-busybox/modules.d/99base/dracut-lib.sh	2017-04-04 17:07:29.208442424 +0200
@@ -685,7 +685,7 @@
 copytree() {
     local src="$1" dest="$2"
     mkdir -p "$dest"; dest=$(readlink -e -q "$dest")
-    ( cd "$src"; cp -af . -t "$dest" )
+    ( cd "$src"; cp -af . "$dest" )
 }
 
 # Evaluates command for UUIDs either given as arguments for this function or all
diff -Naur dracut-045/test/TEST-01-BASIC/create-root.sh dracut-045-busybox/test/TEST-01-BASIC/create-root.sh
--- dracut-045/test/TEST-01-BASIC/create-root.sh	2017-04-03 10:26:25.000000000 +0200
+++ dracut-045-busybox/test/TEST-01-BASIC/create-root.sh	2017-04-04 17:03:13.312226939 +0200
@@ -16,7 +16,7 @@
 mkfs.ext3 -L dracut /dev/sda2
 mkdir -p /root
 mount /dev/sda2 /root
-cp -a -t /root /source/*
+cp -a /source/* /root
 mkdir -p /root/run
 umount /root
 echo "dracut-root-block-created" >/dev/sda1
diff -Naur dracut-045/test/TEST-02-SYSTEMD/create-root.sh dracut-045-busybox/test/TEST-02-SYSTEMD/create-root.sh
--- dracut-045/test/TEST-02-SYSTEMD/create-root.sh	2017-04-03 10:26:25.000000000 +0200
+++ dracut-045-busybox/test/TEST-02-SYSTEMD/create-root.sh	2017-04-04 17:01:25.550399891 +0200
@@ -16,7 +16,7 @@
 mkfs.ext3 -L dracut /dev/sda2
 mkdir -p /root
 mount /dev/sda2 /root
-cp -a -t /root /source/*
+cp -a /source/* /root
 mkdir -p /root/run
 umount /root
 echo "dracut-root-block-created" >/dev/sda1
diff -Naur dracut-045/test/TEST-03-USR-MOUNT/create-root.sh dracut-045-busybox/test/TEST-03-USR-MOUNT/create-root.sh
--- dracut-045/test/TEST-03-USR-MOUNT/create-root.sh	2017-04-03 10:26:25.000000000 +0200
+++ dracut-045-busybox/test/TEST-03-USR-MOUNT/create-root.sh	2017-04-04 17:01:08.946580828 +0200
@@ -30,7 +30,7 @@
 btrfs subvolume create /root/usr/usr
 umount /root/usr
 mount -t btrfs -o subvol=usr /dev/sdb2 /root/usr
-cp -a -t /root /source/*
+cp -a /source/* /root
 mkdir -p /root/run
 umount /root/usr
 umount /root
diff -Naur dracut-045/test/TEST-04-FULL-SYSTEMD/create-root.sh dracut-045-busybox/test/TEST-04-FULL-SYSTEMD/create-root.sh
--- dracut-045/test/TEST-04-FULL-SYSTEMD/create-root.sh	2017-04-03 10:26:25.000000000 +0200
+++ dracut-045-busybox/test/TEST-04-FULL-SYSTEMD/create-root.sh	2017-04-04 17:02:15.538855502 +0200
@@ -31,7 +31,7 @@
 btrfs subvolume create /root/usr/usr
 umount /root/usr
 mount -t btrfs -o subvol=usr /dev/sdb2 /root/usr
-cp -a -t /root /source/*
+cp -a /source/* /root
 mkdir -p /root/run
 umount /root/usr
 umount /root
diff -Naur dracut-045/test/TEST-10-RAID/create-root.sh dracut-045-busybox/test/TEST-10-RAID/create-root.sh
--- dracut-045/test/TEST-10-RAID/create-root.sh	2017-04-03 10:26:25.000000000 +0200
+++ dracut-045-busybox/test/TEST-10-RAID/create-root.sh	2017-04-04 17:00:31.721986705 +0200
@@ -29,7 +29,7 @@
 mke2fs /dev/dracut/root
 mkdir -p /sysroot
 mount /dev/dracut/root /sysroot
-cp -a -t /sysroot /source/*
+cp -a /source/* /sysroot
 umount /sysroot
 lvm lvchange -a n /dev/dracut/root
 udevadm settle
diff -Naur dracut-045/test/TEST-11-LVM/create-root.sh dracut-045-busybox/test/TEST-11-LVM/create-root.sh
--- dracut-045/test/TEST-11-LVM/create-root.sh	2017-04-03 10:26:25.000000000 +0200
+++ dracut-045-busybox/test/TEST-11-LVM/create-root.sh	2017-04-04 17:02:36.184630814 +0200
@@ -22,7 +22,7 @@
 mke2fs /dev/dracut/root && \
 mkdir -p /sysroot && \
 mount /dev/dracut/root /sysroot && \
-cp -a -t /sysroot /source/* && \
+cp -a /source/* /sysroot && \
 umount /sysroot && \
 sleep 1 && \
 lvm lvchange -a n /dev/dracut/root && \
diff -Naur dracut-045/test/TEST-12-RAID-DEG/create-root.sh dracut-045-busybox/test/TEST-12-RAID-DEG/create-root.sh
--- dracut-045/test/TEST-12-RAID-DEG/create-root.sh	2017-04-03 10:26:25.000000000 +0200
+++ dracut-045-busybox/test/TEST-12-RAID-DEG/create-root.sh	2017-04-04 17:01:59.911025636 +0200
@@ -32,7 +32,7 @@
 mke2fs -L root /dev/dracut/root
 mkdir -p /sysroot
 mount /dev/dracut/root /sysroot
-cp -a -t /sysroot /source/*
+cp -a /source/* /sysroot
 mkdir /sysroot/run
 umount /sysroot
 lvm lvchange -a n /dev/dracut/root 
diff -Naur dracut-045/test/TEST-12-RAID-DEG/test.sh dracut-045-busybox/test/TEST-12-RAID-DEG/test.sh
--- dracut-045/test/TEST-12-RAID-DEG/test.sh	2017-04-03 10:26:25.000000000 +0200
+++ dracut-045-busybox/test/TEST-12-RAID-DEG/test.sh	2017-04-04 17:05:36.604670340 +0200
@@ -11,8 +11,8 @@
 
 client_run() {
     echo "CLIENT TEST START: $@"
-    cp --sparse=always --reflink=auto $TESTDIR/disk2.img $TESTDIR/disk2.img.new
-    cp --sparse=always --reflink=auto $TESTDIR/disk3.img $TESTDIR/disk3.img.new
+    cp $TESTDIR/disk2.img $TESTDIR/disk2.img.new
+    cp $TESTDIR/disk3.img $TESTDIR/disk3.img.new
 
     $testdir/run-qemu \
 	-drive format=raw,index=0,media=disk,file=$TESTDIR/root.ext2 -m 256M -nographic   -smp 2 \
@@ -33,7 +33,7 @@
 }
 
 test_run() {
-    eval $(grep -F --binary-files=text -m 1 MD_UUID $TESTDIR/root.ext2)
+    eval $(grep -F -m 1 MD_UUID $TESTDIR/root.ext2)
     echo "MD_UUID=$MD_UUID"
     read LUKS_UUID < $TESTDIR/luksuuid
 
@@ -122,7 +122,7 @@
 	-initrd $TESTDIR/initramfs.makeroot  || return 1
 
     grep -F -m 1 -q dracut-root-block-created $TESTDIR/root.ext2 || return 1
-    eval $(grep -F --binary-files=text -m 1 MD_UUID $TESTDIR/root.ext2)
+    eval $(grep -F -m 1 MD_UUID $TESTDIR/root.ext2)
     eval $(grep -F -a -m 1 ID_FS_UUID $TESTDIR/root.ext2)
     echo $ID_FS_UUID > $TESTDIR/luksuuid
 
diff -Naur dracut-045/test/TEST-13-ENC-RAID-LVM/create-root.sh dracut-045-busybox/test/TEST-13-ENC-RAID-LVM/create-root.sh
--- dracut-045/test/TEST-13-ENC-RAID-LVM/create-root.sh	2017-04-03 10:26:25.000000000 +0200
+++ dracut-045-busybox/test/TEST-13-ENC-RAID-LVM/create-root.sh	2017-04-04 16:59:13.278843128 +0200
@@ -32,7 +32,7 @@
 mke2fs /dev/dracut/root && \
 mkdir -p /sysroot && \
 mount /dev/dracut/root /sysroot && \
-cp -a -t /sysroot /source/* && \
+cp -a /source/* /sysroot && \
 umount /sysroot && \
 sleep 2 && \
 lvm lvchange -a n /dev/dracut/root && \
diff -Naur dracut-045/test/TEST-13-ENC-RAID-LVM/test.sh dracut-045-busybox/test/TEST-13-ENC-RAID-LVM/test.sh
--- dracut-045/test/TEST-13-ENC-RAID-LVM/test.sh	2017-04-03 10:26:25.000000000 +0200
+++ dracut-045-busybox/test/TEST-13-ENC-RAID-LVM/test.sh	2017-04-04 16:53:55.650331792 +0200
@@ -115,7 +115,7 @@
 	-append "root=/dev/fakeroot rw rootfstype=ext2 quiet console=ttyS0,115200n81 selinux=0" \
 	-initrd $TESTDIR/initramfs.makeroot  || return 1
     grep -F -m 1 -q dracut-root-block-created $TESTDIR/root.ext2 || return 1
-    cryptoUUIDS=$(grep -F --binary-files=text  -m 3 ID_FS_UUID $TESTDIR/root.ext2)
+    cryptoUUIDS=$(grep -F  -m 3 ID_FS_UUID $TESTDIR/root.ext2)
     for uuid in $cryptoUUIDS; do
 	eval $uuid
 	printf ' rd.luks.uuid=luks-%s ' $ID_FS_UUID
diff -Naur dracut-045/test/TEST-14-IMSM/create-root.sh dracut-045-busybox/test/TEST-14-IMSM/create-root.sh
--- dracut-045/test/TEST-14-IMSM/create-root.sh	2017-04-03 10:26:25.000000000 +0200
+++ dracut-045-busybox/test/TEST-14-IMSM/create-root.sh	2017-04-04 17:00:51.407772021 +0200
@@ -62,7 +62,7 @@
 mke2fs -L root /dev/dracut/root && \
 mkdir -p /sysroot && \
 mount /dev/dracut/root /sysroot && \
-cp -a -t /sysroot /source/* && \
+cp -a /source/* /sysroot && \
 umount /sysroot && \
 lvm lvchange -a n /dev/dracut/root && \
 udevadm settle
diff -Naur dracut-045/test/TEST-14-IMSM/test.sh dracut-045-busybox/test/TEST-14-IMSM/test.sh
--- dracut-045/test/TEST-14-IMSM/test.sh	2017-04-03 10:26:25.000000000 +0200
+++ dracut-045-busybox/test/TEST-14-IMSM/test.sh	2017-04-04 16:53:44.293457336 +0200
@@ -108,7 +108,7 @@
 	-append "root=/dev/dracut/root rw rootfstype=ext2 quiet console=ttyS0,115200n81 selinux=0" \
 	-initrd $TESTDIR/initramfs.makeroot  || return 1
     grep -F -m 1 -q dracut-root-block-created $TESTDIR/root.ext2 || return 1
-    eval $(grep -F --binary-files=text -m 1 MD_UUID $TESTDIR/root.ext2)
+    eval $(grep -F -m 1 MD_UUID $TESTDIR/root.ext2)
     echo $MD_UUID > $TESTDIR/mduuid
     (
 	export initdir=$TESTDIR/overlay
diff -Naur dracut-045/test/TEST-15-BTRFSRAID/create-root.sh dracut-045-busybox/test/TEST-15-BTRFSRAID/create-root.sh
--- dracut-045/test/TEST-15-BTRFSRAID/create-root.sh	2017-04-03 10:26:25.000000000 +0200
+++ dracut-045-busybox/test/TEST-15-BTRFSRAID/create-root.sh	2017-04-04 16:59:33.229625156 +0200
@@ -21,7 +21,7 @@
 set -e
 mkdir -p /sysroot
 mount -t btrfs /dev/sda5 /sysroot
-cp -a -t /sysroot /source/*
+cp -a /source/* /sysroot
 umount /sysroot
 echo "dracut-root-block-created" >/dev/sda1
 poweroff -f
diff -Naur dracut-045/test/TEST-17-LVM-THIN/create-root.sh dracut-045-busybox/test/TEST-17-LVM-THIN/create-root.sh
--- dracut-045/test/TEST-17-LVM-THIN/create-root.sh	2017-04-03 10:26:25.000000000 +0200
+++ dracut-045-busybox/test/TEST-17-LVM-THIN/create-root.sh	2017-04-04 17:02:54.403432599 +0200
@@ -23,7 +23,7 @@
 mke2fs /dev/dracut/root && \
 mkdir -p /sysroot && \
 mount /dev/dracut/root /sysroot && \
-cp -a -t /sysroot /source/* && \
+cp -a /source/* /sysroot && \
 umount /sysroot && \
 sleep 1 && \
 lvm lvchange -a n /dev/dracut/root && \
diff -Naur dracut-045/test/TEST-30-ISCSI/create-root.sh dracut-045-busybox/test/TEST-30-ISCSI/create-root.sh
--- dracut-045/test/TEST-30-ISCSI/create-root.sh	2017-04-03 10:26:25.000000000 +0200
+++ dracut-045-busybox/test/TEST-30-ISCSI/create-root.sh	2017-04-04 17:00:11.684205317 +0200
@@ -8,7 +8,7 @@
 mkfs.ext3 -j -L singleroot -F /dev/sda && \
 mkdir -p /sysroot && \
 mount /dev/sda /sysroot && \
-cp -a -t /sysroot /source/* && \
+cp -a /source/* /sysroot && \
 umount /sysroot && \
 mdadm --create /dev/md0 --run --auto=yes --level=stripe --raid-devices=2 /dev/sdc /dev/sdd && \
 mdadm -W /dev/md0 || : && \
@@ -18,7 +18,7 @@
 lvm vgchange -ay && \
 mkfs.ext3 -j -L sysroot /dev/dracut/root && \
 mount /dev/dracut/root /sysroot && \
-cp -a -t /sysroot /source/* && \
+cp -a /source/* /sysroot && \
 umount /sysroot && \
 lvm lvchange -a n /dev/dracut/root && \
 echo "dracut-root-block-created" >/dev/sdb
diff -Naur dracut-045/test/TEST-40-NBD/create-root.sh dracut-045-busybox/test/TEST-40-NBD/create-root.sh
--- dracut-045/test/TEST-40-NBD/create-root.sh	2017-04-03 10:26:25.000000000 +0200
+++ dracut-045-busybox/test/TEST-40-NBD/create-root.sh	2017-04-04 17:01:43.066209080 +0200
@@ -17,7 +17,7 @@
 /sbin/tune2fs -e continue /dev/dracut/root && \
 mkdir -p /sysroot && \
 mount /dev/dracut/root /sysroot && \
-cp -a -t /sysroot /source/* && \
+cp -a /source/* /sysroot && \
 umount /sysroot
 sleep 1
 lvm lvchange -a n /dev/dracut/root
diff -Naur dracut-045/test/TEST-99-RPM/test.sh dracut-045-busybox/test/TEST-99-RPM/test.sh
--- dracut-045/test/TEST-99-RPM/test.sh	2017-04-03 10:26:25.000000000 +0200
+++ dracut-045-busybox/test/TEST-99-RPM/test.sh	2017-04-04 16:51:45.611773715 +0200
@@ -26,7 +26,7 @@
     mount -t devtmpfs devtmpfs "$rootdir/dev"
 
     mkdir -p "$rootdir/$TESTDIR"
-    cp --reflink=auto -a \
+    cp -a \
        "$TESTDIR"/dracut-[0-9]*.$(arch).rpm \
        "$TESTDIR"/dracut-network-[0-9]*.$(arch).rpm \
        "$rootdir/$TESTDIR/"