diff -Naur grub-2.02~rc2/docs/grub.info grub-2.02~rc2-magellan/docs/grub.info --- grub-2.02~rc2/docs/grub.info 2017-03-14 01:02:27.000000000 +0100 +++ grub-2.02~rc2-magellan/docs/grub.info 2017-04-04 11:05:27.903139948 +0200 @@ -1155,7 +1155,7 @@ Booting::, and *note Shell-like scripting::), and to disable any system provided by their distribution to automatically run 'grub-mkconfig'. - The file '/etc/default/grub' controls the operation of + The file '/etc/conf.d/grub' controls the operation of 'grub-mkconfig'. It is sourced by a shell script, and so must be valid POSIX shell input; normally, it will just be a sequence of 'KEY=value' lines, but if the value contains spaces or other special characters then @@ -1163,7 +1163,7 @@ GRUB_TERMINAL_INPUT="console serial" - Valid keys in '/etc/default/grub' are as follows: + Valid keys in '/etc/conf.d/grub' are as follows: 'GRUB_DEFAULT' The default menu entry. This may be a number, in which case it @@ -1670,7 +1670,7 @@ 'GRUB_DISABLE_OS_PROBER=true' - in /etc/default/grub + in /etc/conf.d/grub Then write a grub.cfg (/mnt/boot/grub/grub.cfg): diff -Naur grub-2.02~rc2/docs/grub.texi grub-2.02~rc2-magellan/docs/grub.texi --- grub-2.02~rc2/docs/grub.texi 2017-02-11 23:25:13.000000000 +0100 +++ grub-2.02~rc2-magellan/docs/grub.texi 2017-04-04 11:05:27.911139862 +0200 @@ -1238,7 +1238,7 @@ (@pxref{Booting}, and @ref{Shell-like scripting}), and to disable any system provided by their distribution to automatically run @command{grub-mkconfig}. -The file @file{/etc/default/grub} controls the operation of +The file @file{/etc/conf.d/grub} controls the operation of @command{grub-mkconfig}. It is sourced by a shell script, and so must be valid POSIX shell input; normally, it will just be a sequence of @samp{KEY=value} lines, but if the value contains spaces or other special @@ -1248,7 +1248,7 @@ GRUB_TERMINAL_INPUT="console serial" @end example -Valid keys in @file{/etc/default/grub} are as follows: +Valid keys in @file{/etc/conf.d/grub} are as follows: @table @samp @item GRUB_DEFAULT @@ -1753,7 +1753,7 @@ @code{GRUB_DISABLE_OS_PROBER=true} -in /etc/default/grub +in /etc/conf.d/grub Then write a grub.cfg (/mnt/boot/grub/grub.cfg): diff -Naur grub-2.02~rc2/po/ast.po grub-2.02~rc2-magellan/po/ast.po --- grub-2.02~rc2/po/ast.po 2017-03-15 09:41:18.000000000 +0100 +++ grub-2.02~rc2-magellan/po/ast.po 2017-04-04 11:05:27.576143472 +0200 @@ -6643,7 +6643,7 @@ #: util/grub-mkconfig.in:271 msgid "" "Syntax errors are detected in generated GRUB config file.\n" -"Ensure that there are no errors in /etc/default/grub\n" +"Ensure that there are no errors in /etc/conf.d/grub\n" "and /etc/grub.d/* files or please file a bug report with\n" "%s file attached." msgstr "" diff -Naur grub-2.02~rc2/po/ca.gmo grub-2.02~rc2-magellan/po/ca.gmo --- grub-2.02~rc2/po/ca.gmo 2017-03-15 09:41:37.000000000 +0100 +++ grub-2.02~rc2-magellan/po/ca.gmo 2017-04-04 11:05:27.656142610 +0200 @@ -151,7 +151,7 @@ Specify filename.Specify hash to use.Specify one or more font files to load.Specify size for each read operationSpecify the number of input files.Speed: %s Start GDB stub on given portStop GDB stubStorage information for `%s' does not include typeStorage information for `%s' indicates neither a plain partition nor a plain diskStore matched component NUMBER in VARNAME.SuccessSundaySuppress normal output (warnings remain).Switch to native disk drivers. If no modules are specified default set (pata,ahci,usbms,ohci,uhci,ehci) is usedSyntax error at line %u Syntax errors are detected in generated GRUB config file. -Ensure that there are no errors in /etc/default/grub +Ensure that there are no errors in /etc/conf.d/grub and /etc/grub.d/* files or please file a bug report with %s file attached.System management bus controller I/O space is at 0x%x TTARGETTHEMESTarget format not specified (use the -O option).Terminal has specified geometry.Terminal is ASCII-only [default].Terminal is logical-ordered UTF-8.Terminal is visually-ordered UTF-8.Test USB support.Test bit at BYTE:BIT in CMOS.Test file read speed.Test if REGEXP matches STRING.Test video subsystem in mode WxH.Test video subsystem.Text-only The files are identical. @@ -304,7 +304,7 @@ Especifica el nom del fitxer.Especifica el hash que cal utilitzar.Especifiqueu un o més fitxers de fonts que vulgueu carregar.Especifica la mida per cada operació de lecturaEspecifica el nombre de fitxers d'entrada.Velocitat: %s Inicia l'estub del GDB al port indicatAtura l'estub del GDBLa informació d'emmagatzemament de «%s» no inclou el tipusLa informació d'emmagatzemament de «%s» no indica ni una partició senzilla ni un disc senzillDesa el component coincident NÚMERO a NOMVARIABLE.ÈxitDiumengeSuprimeix la sortida normal (conserva els avisos).Canvia al controlador de discs nadiu. Si no s'especifica cap mòdul es fa servir el conjunt per defecte (pata,ahci,usbms,ohci,uhci,ehci)Hi ha un error de sintaxi a la línia %u S'han detectat errors de sintaxi al fitxer de configuració del GRUB generat. -Assegureu-vos que no hi ha errors a /etc/default/grub o als fitxers +Assegureu-vos que no hi ha errors a /etc/conf.d/grub o als fitxers /etc/grub.d/* o bé envieu un informe d'error adjuntant el fitxer %s L'espai I/O del controlador de bus de gestió del sistema és a 0x%x TOBJECTIUTHEMESNo s'ha especificat el format de l'objectiu (utilitzeu l'opció -O).El terminal té una geometria específica.El terminal és només ASCII [per defecte].El terminal està ordenat lògicament en UTF-8.El Terminal està ordenat visualment en UTF-8.Prova la compatibilitat amb USB.Comprova el bit a BYTE:BIT a CMOS.Prova la velocitat de lectura del fitxer.Comprova si l'EXPREG coincideix amb la CADENA.Prova els subsistema de vídeo en mode Ample x Alt.Prova el subsistema de vídeo.Només text Els fitxers són idèntics. L'entrada realçada s'executarà automàticament d'aquí %d s.Aquest VDEV és un RAIDZ%llu diff -Naur grub-2.02~rc2/po/ca.po grub-2.02~rc2-magellan/po/ca.po --- grub-2.02~rc2/po/ca.po 2017-03-15 09:41:18.000000000 +0100 +++ grub-2.02~rc2-magellan/po/ca.po 2017-04-04 11:05:27.701142125 +0200 @@ -6620,13 +6620,13 @@ #: util/grub-mkconfig.in:271 msgid "" "Syntax errors are detected in generated GRUB config file.\n" -"Ensure that there are no errors in /etc/default/grub\n" +"Ensure that there are no errors in /etc/conf.d/grub\n" "and /etc/grub.d/* files or please file a bug report with\n" "%s file attached." msgstr "" "S'han detectat errors de sintaxi al fitxer de configuració del GRUB " "generat.\n" -"Assegureu-vos que no hi ha errors a /etc/default/grub o als fitxers\n" +"Assegureu-vos que no hi ha errors a /etc/conf.d/grub o als fitxers\n" " /etc/grub.d/* o bé envieu un informe d'error adjuntant el fitxer %s " #: util/grub-mkconfig.in:283 diff -Naur grub-2.02~rc2/po/da.gmo grub-2.02~rc2-magellan/po/da.gmo --- grub-2.02~rc2/po/da.gmo 2017-03-15 09:41:37.000000000 +0100 +++ grub-2.02~rc2-magellan/po/da.gmo 2017-04-04 11:05:27.548143774 +0200 @@ -139,7 +139,7 @@ Specify filename.Specify hash to use.Specify one or more font files to load.Specify size for each read operationSpecify the number of input files.Speed: %s Start GDB stub on given portStop GDB stubStorage information for `%s' does not include typeStorage information for `%s' indicates neither a plain partition nor a plain diskStore matched component NUMBER in VARNAME.SuccessSundaySuppress normal output (warnings remain).Switch to native disk drivers. If no modules are specified default set (pata,ahci,usbms,ohci,uhci,ehci) is usedSyntax error at line %u Syntax errors are detected in generated GRUB config file. -Ensure that there are no errors in /etc/default/grub +Ensure that there are no errors in /etc/conf.d/grub and /etc/grub.d/* files or please file a bug report with %s file attached.System management bus controller I/O space is at 0x%x TTARGETTHEMESTarget format not specified (use the -O option).Terminal has specified geometry.Terminal is ASCII-only [default].Terminal is logical-ordered UTF-8.Terminal is visually-ordered UTF-8.Test USB support.Test bit at BYTE:BIT in CMOS.Test file read speed.Test if REGEXP matches STRING.Test video subsystem in mode WxH.Test video subsystem.Text-only The files are identical. @@ -293,7 +293,7 @@ Start GDB-stub på den givne portStop GDB-stubLagerinformation for "%s" inkluderer ikke typeLageroplysninger for "%s" angiver hverken en simpel partition eller en simpel diskGem matchet komponent NUMMER i VARNAVN.SuccesSøndagUndertryk normal udskrift (advarsler vises stadig).Skift til platformsspecifikke diskdrivere. Hvis der ikke er angivet nogen moduler, bruges standardmodulerne (pata,ahci,usbms,ohci,uhci,ehci)Syntaksfejl på linje %u Der blev fundet syntaksfejl i den genererede GRUB- konfigurationsfil. Sikr dig at der ikke er nogen fejl -i filerne /etc/default/grub eller /etc/grub.d/*, eller +i filerne /etc/conf.d/grub eller /etc/grub.d/*, eller indsend venligst en fejlrapport med filen %s vedhæftet.I/O-pladsen for controlleren til systemhåndteringsbussen er 0x%x TMÅLTEMAERMålformatet er ikke angivet (brug tilvalget -O).Terminal har angivet geometri.Terminal bruger kun ASCII [standard].Terminal bruger logisk ordnet UTF-8.Terminal bruger visuelt ordnet UTF-8.Test USB-understøttelse.Test bit ved BYTE:BIT i CMOS.Test fillæsehastighed.Tjek om REGUDTRYK matcher STRENG.Test videoundersystemet i tilstanden BxH.Test videoundersystem.Kun tekst Filerne er identiske. Det fremhævede punkt køres automatisk om %d s.Denne VDEV er en RAIDZ%llu diff -Naur grub-2.02~rc2/po/da.po grub-2.02~rc2-magellan/po/da.po --- grub-2.02~rc2/po/da.po 2017-03-15 09:41:18.000000000 +0100 +++ grub-2.02~rc2-magellan/po/da.po 2017-04-04 11:05:27.664142524 +0200 @@ -6588,13 +6588,13 @@ #: util/grub-mkconfig.in:271 msgid "" "Syntax errors are detected in generated GRUB config file.\n" -"Ensure that there are no errors in /etc/default/grub\n" +"Ensure that there are no errors in /etc/conf.d/grub\n" "and /etc/grub.d/* files or please file a bug report with\n" "%s file attached." msgstr "" "Der blev fundet syntaksfejl i den genererede GRUB-\n" "konfigurationsfil. Sikr dig at der ikke er nogen fejl\n" -"i filerne /etc/default/grub eller /etc/grub.d/*, eller\n" +"i filerne /etc/conf.d/grub eller /etc/grub.d/*, eller\n" "indsend venligst en fejlrapport med filen %s vedhæftet." #: util/grub-mkconfig.in:283 diff -Naur grub-2.02~rc2/po/de_CH.gmo grub-2.02~rc2-magellan/po/de_CH.gmo --- grub-2.02~rc2/po/de_CH.gmo 2017-03-15 09:41:37.000000000 +0100 +++ grub-2.02~rc2-magellan/po/de_CH.gmo 2017-04-04 11:05:27.767141414 +0200 @@ -133,7 +133,7 @@ Specify filename.Specify hash to use.Specify one or more font files to load.Specify size for each read operationSpecify the number of input files.Speed: %s Start GDB stub on given portStop GDB stubStorage information for `%s' does not include typeStorage information for `%s' indicates neither a plain partition nor a plain diskStore matched component NUMBER in VARNAME.SuccessSundaySuppress normal output (warnings remain).Switch to native disk drivers. If no modules are specified default set (pata,ahci,usbms,ohci,uhci,ehci) is usedSyntax error at line %u Syntax errors are detected in generated GRUB config file. -Ensure that there are no errors in /etc/default/grub +Ensure that there are no errors in /etc/conf.d/grub and /etc/grub.d/* files or please file a bug report with %s file attached.System management bus controller I/O space is at 0x%x TTARGETTHEMESTarget format not specified (use the -O option).Terminal has specified geometry.Terminal is ASCII-only [default].Terminal is logical-ordered UTF-8.Terminal is visually-ordered UTF-8.Test USB support.Test bit at BYTE:BIT in CMOS.Test file read speed.Test if REGEXP matches STRING.Test video subsystem in mode WxH.Test video subsystem.Text-only The files are identical. @@ -286,7 +286,7 @@ GDB-Stub auf dem angegebenen Port startenGDB-Stub stoppenSpeicherinfo für «%s» enthält keinen TypSpeicherinformation für «%s» weist weder auf eine Partition noch einen Datenträger hinEntsprechende Komponenten-NUMMER in VARNAME speichern.ErfolgSonntagNormale Ausgaben unterdrücken (Warnungen verbleiben)Zu nativen Festplattentreibern wechseln. Falls keine Module angegeben werden, wird die Vorgabe verwendet (pata,ahci,usbms,ohci,uhci,ehci).Syntaxfehler in Zeile %u In der erzeugten GRUB-Konfigurationsdatei wurden Syntaxfehler entdeckt. Stellen Sie sicher, das die Dateien -/etc/default/grub und /etc/grub.d/* fehlerfrei sind oder +/etc/conf.d/grub und /etc/grub.d/* fehlerfrei sind oder erstellen Sie einen Fehlerbericht mit %s als Anhang.Ein-/Ausgabebereich des Systemverwaltungsbus-Controllers ist bei 0x%x TZIELTHEMENZielformat wurde nicht angegeben (verwenden Sie die Option -0).Terminalgeometrie wurde festgelegt.Terminal ist nur ASCII [Vorgabe].Terminal ist logisches UTF-8.Terminal ist visuelles UTF-8.USB-Unterstützung überprüfen.Bit bei BYTE:BIT im CMOS testen.Dateilesegeschwindigkeit testen.Prüfen, ob REGEXP auf ZEICHENKETTE passt.Das Video-Subsystem im Modus BxH überprüfen.Das Video-Subsystem überprüfen.Nur TextDie Dateien sind identisch. Der hervorgehobene Eintrag wird automatisch in %ds ausgeführt.Dieses VDEV ist ein RAIDZ%llu diff -Naur grub-2.02~rc2/po/de_CH.po grub-2.02~rc2-magellan/po/de_CH.po --- grub-2.02~rc2/po/de_CH.po 2017-03-15 09:41:18.000000000 +0100 +++ grub-2.02~rc2-magellan/po/de_CH.po 2017-04-04 11:05:27.749141608 +0200 @@ -6599,13 +6599,13 @@ #: util/grub-mkconfig.in:271 msgid "" "Syntax errors are detected in generated GRUB config file.\n" -"Ensure that there are no errors in /etc/default/grub\n" +"Ensure that there are no errors in /etc/conf.d/grub\n" "and /etc/grub.d/* files or please file a bug report with\n" "%s file attached." msgstr "" "In der erzeugten GRUB-Konfigurationsdatei wurden\n" "Syntaxfehler entdeckt. Stellen Sie sicher, das die Dateien\n" -"/etc/default/grub und /etc/grub.d/* fehlerfrei sind oder\n" +"/etc/conf.d/grub und /etc/grub.d/* fehlerfrei sind oder\n" "erstellen Sie einen Fehlerbericht mit %s als Anhang." #: util/grub-mkconfig.in:283 diff -Naur grub-2.02~rc2/po/de.gmo grub-2.02~rc2-magellan/po/de.gmo --- grub-2.02~rc2/po/de.gmo 2017-03-15 09:41:37.000000000 +0100 +++ grub-2.02~rc2-magellan/po/de.gmo 2017-04-04 11:05:27.703142103 +0200 @@ -136,7 +136,7 @@ Specify filename.Specify hash to use.Specify one or more font files to load.Specify size for each read operationSpecify the number of input files.Speed: %s Start GDB stub on given portStop GDB stubStorage information for `%s' does not include typeStorage information for `%s' indicates neither a plain partition nor a plain diskStore matched component NUMBER in VARNAME.SuccessSundaySuppress normal output (warnings remain).Switch to native disk drivers. If no modules are specified default set (pata,ahci,usbms,ohci,uhci,ehci) is usedSyntax error at line %u Syntax errors are detected in generated GRUB config file. -Ensure that there are no errors in /etc/default/grub +Ensure that there are no errors in /etc/conf.d/grub and /etc/grub.d/* files or please file a bug report with %s file attached.System management bus controller I/O space is at 0x%x TTARGETTHEMESTarget format not specified (use the -O option).Terminal has specified geometry.Terminal is ASCII-only [default].Terminal is logical-ordered UTF-8.Terminal is visually-ordered UTF-8.Test USB support.Test bit at BYTE:BIT in CMOS.Test file read speed.Test if REGEXP matches STRING.Test video subsystem in mode WxH.Test video subsystem.Text-only The files are identical. @@ -289,7 +289,7 @@ GDB-Stub auf dem angegebenen Port startenGDB-Stub stoppenSpeicherinfo für »%s« enthält keinen TypSpeicherinformation für »%s« weist weder auf eine Partition noch einen Datenträger hinEntsprechende Komponenten-NUMMER in VARNAME speichern.ErfolgSonntagNormale Ausgaben unterdrücken (Warnungen verbleiben)Zu nativen Festplattentreibern wechseln. Falls keine Module angegeben werden, wird die Vorgabe verwendet (pata,ahci,usbms,ohci,uhci,ehci).Syntaxfehler in Zeile %u In der erzeugten GRUB-Konfigurationsdatei wurden Syntaxfehler entdeckt. Stellen Sie sicher, das die Dateien -/etc/default/grub und /etc/grub.d/* fehlerfrei sind oder +/etc/conf.d/grub und /etc/grub.d/* fehlerfrei sind oder erstellen Sie einen Fehlerbericht mit %s als Anhang.Ein-/Ausgabebereich des Systemverwaltungsbus-Controllers ist bei 0x%x TZIELTHEMENZielformat wurde nicht angegeben (verwenden Sie die Option -0).Terminalgeometrie wurde festgelegt.Terminal ist nur ASCII [Vorgabe].Terminal ist logisches UTF-8.Terminal ist visuelles UTF-8.USB-Unterstützung überprüfen.Bit bei BYTE:BIT im CMOS testen.Dateilesegeschwindigkeit testen.Prüfen, ob REGEXP auf ZEICHENKETTE passt.Das Video-Subsystem im Modus BxH überprüfen.Das Video-Subsystem überprüfen.Nur TextDie Dateien sind identisch. Der hervorgehobene Eintrag wird automatisch in %ds ausgeführt.Dieses VDEV ist ein RAIDZ%llu diff -Naur grub-2.02~rc2/po/de@hebrew.gmo grub-2.02~rc2-magellan/po/de@hebrew.gmo --- grub-2.02~rc2/po/de@hebrew.gmo 2017-03-15 09:41:38.000000000 +0100 +++ grub-2.02~rc2-magellan/po/de@hebrew.gmo 2017-04-04 11:05:27.654142632 +0200 @@ -136,7 +136,7 @@ Specify filename.Specify hash to use.Specify one or more font files to load.Specify size for each read operationSpecify the number of input files.Speed: %s Start GDB stub on given portStop GDB stubStorage information for `%s' does not include typeStorage information for `%s' indicates neither a plain partition nor a plain diskStore matched component NUMBER in VARNAME.SuccessSundaySuppress normal output (warnings remain).Switch to native disk drivers. If no modules are specified default set (pata,ahci,usbms,ohci,uhci,ehci) is usedSyntax error at line %u Syntax errors are detected in generated GRUB config file. -Ensure that there are no errors in /etc/default/grub +Ensure that there are no errors in /etc/conf.d/grub and /etc/grub.d/* files or please file a bug report with %s file attached.System management bus controller I/O space is at 0x%x TTARGETTHEMESTarget format not specified (use the -O option).Terminal has specified geometry.Terminal is ASCII-only [default].Terminal is logical-ordered UTF-8.Terminal is visually-ordered UTF-8.Test USB support.Test bit at BYTE:BIT in CMOS.Test file read speed.Test if REGEXP matches STRING.Test video subsystem in mode WxH.Test video subsystem.Text-only The files are identical. diff -Naur grub-2.02~rc2/po/de@hebrew.po grub-2.02~rc2-magellan/po/de@hebrew.po --- grub-2.02~rc2/po/de@hebrew.po 2017-03-15 09:41:19.000000000 +0100 +++ grub-2.02~rc2-magellan/po/de@hebrew.po 2017-04-04 11:05:27.653142642 +0200 @@ -6594,7 +6594,7 @@ #: util/grub-mkconfig.in:271 msgid "" "Syntax errors are detected in generated GRUB config file.\n" -"Ensure that there are no errors in /etc/default/grub\n" +"Ensure that there are no errors in /etc/conf.d/grub\n" "and /etc/grub.d/* files or please file a bug report with\n" "%s file attached." msgstr "" diff -Naur grub-2.02~rc2/po/de.po grub-2.02~rc2-magellan/po/de.po --- grub-2.02~rc2/po/de.po 2017-03-15 09:41:18.000000000 +0100 +++ grub-2.02~rc2-magellan/po/de.po 2017-04-04 11:05:27.584143386 +0200 @@ -6599,13 +6599,13 @@ #: util/grub-mkconfig.in:271 msgid "" "Syntax errors are detected in generated GRUB config file.\n" -"Ensure that there are no errors in /etc/default/grub\n" +"Ensure that there are no errors in /etc/conf.d/grub\n" "and /etc/grub.d/* files or please file a bug report with\n" "%s file attached." msgstr "" "In der erzeugten GRUB-Konfigurationsdatei wurden\n" "Syntaxfehler entdeckt. Stellen Sie sicher, das die Dateien\n" -"/etc/default/grub und /etc/grub.d/* fehlerfrei sind oder\n" +"/etc/conf.d/grub und /etc/grub.d/* fehlerfrei sind oder\n" "erstellen Sie einen Fehlerbericht mit %s als Anhang." #: util/grub-mkconfig.in:283 diff -Naur grub-2.02~rc2/po/en@arabic.gmo grub-2.02~rc2-magellan/po/en@arabic.gmo --- grub-2.02~rc2/po/en@arabic.gmo 2017-03-15 09:41:38.000000000 +0100 +++ grub-2.02~rc2-magellan/po/en@arabic.gmo 2017-04-04 11:05:27.666142502 +0200 @@ -146,7 +146,7 @@ Specify filename.Specify hash to use.Specify one or more font files to load.Specify size for each read operationSpecify the number of input files.Speed: %s Start GDB stub on given portStop GDB stubStorage information for `%s' does not include typeStorage information for `%s' indicates neither a plain partition nor a plain diskStore matched component NUMBER in VARNAME.SuccessSundaySuppress normal output (warnings remain).Switch to native disk drivers. If no modules are specified default set (pata,ahci,usbms,ohci,uhci,ehci) is usedSyntax error at line %u Syntax errors are detected in generated GRUB config file. -Ensure that there are no errors in /etc/default/grub +Ensure that there are no errors in /etc/conf.d/grub and /etc/grub.d/* files or please file a bug report with %s file attached.System management bus controller I/O space is at 0x%x TTARGETTHEMESTarget format not specified (use the -O option).Terminal has specified geometry.Terminal is ASCII-only [default].Terminal is logical-ordered UTF-8.Terminal is visually-ordered UTF-8.Test USB support.Test bit at BYTE:BIT in CMOS.Test file read speed.Test if REGEXP matches STRING.Test video subsystem in mode WxH.Test video subsystem.Text-only The files are identical. diff -Naur grub-2.02~rc2/po/en@arabic.po grub-2.02~rc2-magellan/po/en@arabic.po --- grub-2.02~rc2/po/en@arabic.po 2017-03-15 09:41:19.000000000 +0100 +++ grub-2.02~rc2-magellan/po/en@arabic.po 2017-04-04 11:05:27.737141737 +0200 @@ -6524,7 +6524,7 @@ #: util/grub-mkconfig.in:271 msgid "" "Syntax errors are detected in generated GRUB config file.\n" -"Ensure that there are no errors in /etc/default/grub\n" +"Ensure that there are no errors in /etc/conf.d/grub\n" "and /etc/grub.d/* files or please file a bug report with\n" "%s file attached." msgstr "" diff -Naur grub-2.02~rc2/po/en@cyrillic.gmo grub-2.02~rc2-magellan/po/en@cyrillic.gmo --- grub-2.02~rc2/po/en@cyrillic.gmo 2017-03-15 09:41:38.000000000 +0100 +++ grub-2.02~rc2-magellan/po/en@cyrillic.gmo 2017-04-04 11:05:27.636142826 +0200 @@ -145,7 +145,7 @@ Specify filename.Specify hash to use.Specify one or more font files to load.Specify size for each read operationSpecify the number of input files.Speed: %s Start GDB stub on given portStop GDB stubStorage information for `%s' does not include typeStorage information for `%s' indicates neither a plain partition nor a plain diskStore matched component NUMBER in VARNAME.SuccessSundaySuppress normal output (warnings remain).Switch to native disk drivers. If no modules are specified default set (pata,ahci,usbms,ohci,uhci,ehci) is usedSyntax error at line %u Syntax errors are detected in generated GRUB config file. -Ensure that there are no errors in /etc/default/grub +Ensure that there are no errors in /etc/conf.d/grub and /etc/grub.d/* files or please file a bug report with %s file attached.System management bus controller I/O space is at 0x%x TTARGETTHEMESTarget format not specified (use the -O option).Terminal has specified geometry.Terminal is ASCII-only [default].Terminal is logical-ordered UTF-8.Terminal is visually-ordered UTF-8.Test USB support.Test bit at BYTE:BIT in CMOS.Test file read speed.Test if REGEXP matches STRING.Test video subsystem in mode WxH.Test video subsystem.Text-only The files are identical. diff -Naur grub-2.02~rc2/po/en@cyrillic.po grub-2.02~rc2-magellan/po/en@cyrillic.po --- grub-2.02~rc2/po/en@cyrillic.po 2017-03-15 09:41:19.000000000 +0100 +++ grub-2.02~rc2-magellan/po/en@cyrillic.po 2017-04-04 11:05:27.886140131 +0200 @@ -6523,7 +6523,7 @@ #: util/grub-mkconfig.in:271 msgid "" "Syntax errors are detected in generated GRUB config file.\n" -"Ensure that there are no errors in /etc/default/grub\n" +"Ensure that there are no errors in /etc/conf.d/grub\n" "and /etc/grub.d/* files or please file a bug report with\n" "%s file attached." msgstr "" diff -Naur grub-2.02~rc2/po/en@greek.gmo grub-2.02~rc2-magellan/po/en@greek.gmo --- grub-2.02~rc2/po/en@greek.gmo 2017-03-15 09:41:38.000000000 +0100 +++ grub-2.02~rc2-magellan/po/en@greek.gmo 2017-04-04 11:05:27.626142933 +0200 @@ -149,7 +149,7 @@ Specify filename.Specify hash to use.Specify one or more font files to load.Specify size for each read operationSpecify the number of input files.Speed: %s Start GDB stub on given portStop GDB stubStorage information for `%s' does not include typeStorage information for `%s' indicates neither a plain partition nor a plain diskStore matched component NUMBER in VARNAME.SuccessSundaySuppress normal output (warnings remain).Switch to native disk drivers. If no modules are specified default set (pata,ahci,usbms,ohci,uhci,ehci) is usedSyntax error at line %u Syntax errors are detected in generated GRUB config file. -Ensure that there are no errors in /etc/default/grub +Ensure that there are no errors in /etc/conf.d/grub and /etc/grub.d/* files or please file a bug report with %s file attached.System management bus controller I/O space is at 0x%x TTARGETTHEMESTarget format not specified (use the -O option).Terminal has specified geometry.Terminal is ASCII-only [default].Terminal is logical-ordered UTF-8.Terminal is visually-ordered UTF-8.Test USB support.Test bit at BYTE:BIT in CMOS.Test file read speed.Test if REGEXP matches STRING.Test video subsystem in mode WxH.Test video subsystem.Text-only The files are identical. diff -Naur grub-2.02~rc2/po/en@greek.po grub-2.02~rc2-magellan/po/en@greek.po --- grub-2.02~rc2/po/en@greek.po 2017-03-15 09:41:19.000000000 +0100 +++ grub-2.02~rc2-magellan/po/en@greek.po 2017-04-04 11:05:27.801141047 +0200 @@ -6523,7 +6523,7 @@ #: util/grub-mkconfig.in:271 msgid "" "Syntax errors are detected in generated GRUB config file.\n" -"Ensure that there are no errors in /etc/default/grub\n" +"Ensure that there are no errors in /etc/conf.d/grub\n" "and /etc/grub.d/* files or please file a bug report with\n" "%s file attached." msgstr "" diff -Naur grub-2.02~rc2/po/en@hebrew.gmo grub-2.02~rc2-magellan/po/en@hebrew.gmo --- grub-2.02~rc2/po/en@hebrew.gmo 2017-03-15 09:41:38.000000000 +0100 +++ grub-2.02~rc2-magellan/po/en@hebrew.gmo 2017-04-04 11:05:27.793141134 +0200 @@ -149,7 +149,7 @@ Specify filename.Specify hash to use.Specify one or more font files to load.Specify size for each read operationSpecify the number of input files.Speed: %s Start GDB stub on given portStop GDB stubStorage information for `%s' does not include typeStorage information for `%s' indicates neither a plain partition nor a plain diskStore matched component NUMBER in VARNAME.SuccessSundaySuppress normal output (warnings remain).Switch to native disk drivers. If no modules are specified default set (pata,ahci,usbms,ohci,uhci,ehci) is usedSyntax error at line %u Syntax errors are detected in generated GRUB config file. -Ensure that there are no errors in /etc/default/grub +Ensure that there are no errors in /etc/conf.d/grub and /etc/grub.d/* files or please file a bug report with %s file attached.System management bus controller I/O space is at 0x%x TTARGETTHEMESTarget format not specified (use the -O option).Terminal has specified geometry.Terminal is ASCII-only [default].Terminal is logical-ordered UTF-8.Terminal is visually-ordered UTF-8.Test USB support.Test bit at BYTE:BIT in CMOS.Test file read speed.Test if REGEXP matches STRING.Test video subsystem in mode WxH.Test video subsystem.Text-only The files are identical. diff -Naur grub-2.02~rc2/po/en@hebrew.po grub-2.02~rc2-magellan/po/en@hebrew.po --- grub-2.02~rc2/po/en@hebrew.po 2017-03-15 09:41:19.000000000 +0100 +++ grub-2.02~rc2-magellan/po/en@hebrew.po 2017-04-04 11:05:27.567143569 +0200 @@ -6524,7 +6524,7 @@ #: util/grub-mkconfig.in:271 msgid "" "Syntax errors are detected in generated GRUB config file.\n" -"Ensure that there are no errors in /etc/default/grub\n" +"Ensure that there are no errors in /etc/conf.d/grub\n" "and /etc/grub.d/* files or please file a bug report with\n" "%s file attached." msgstr "" diff -Naur grub-2.02~rc2/po/en@piglatin.gmo grub-2.02~rc2-magellan/po/en@piglatin.gmo --- grub-2.02~rc2/po/en@piglatin.gmo 2017-03-15 09:41:38.000000000 +0100 +++ grub-2.02~rc2-magellan/po/en@piglatin.gmo 2017-04-04 11:05:27.594143278 +0200 @@ -153,7 +153,7 @@ Specify filename.Specify hash to use.Specify one or more font files to load.Specify size for each read operationSpecify the number of input files.Speed: %s Start GDB stub on given portStop GDB stubStorage information for `%s' does not include typeStorage information for `%s' indicates neither a plain partition nor a plain diskStore matched component NUMBER in VARNAME.SuccessSundaySuppress normal output (warnings remain).Switch to native disk drivers. If no modules are specified default set (pata,ahci,usbms,ohci,uhci,ehci) is usedSyntax error at line %u Syntax errors are detected in generated GRUB config file. -Ensure that there are no errors in /etc/default/grub +Ensure that there are no errors in /etc/conf.d/grub and /etc/grub.d/* files or please file a bug report with %s file attached.System management bus controller I/O space is at 0x%x TTARGETTHEMESTarget format not specified (use the -O option).Terminal has specified geometry.Terminal is ASCII-only [default].Terminal is logical-ordered UTF-8.Terminal is visually-ordered UTF-8.Test USB support.Test bit at BYTE:BIT in CMOS.Test file read speed.Test if REGEXP matches STRING.Test video subsystem in mode WxH.Test video subsystem.Text-only The files are identical. diff -Naur grub-2.02~rc2/po/en@piglatin.po grub-2.02~rc2-magellan/po/en@piglatin.po --- grub-2.02~rc2/po/en@piglatin.po 2017-03-15 09:41:24.000000000 +0100 +++ grub-2.02~rc2-magellan/po/en@piglatin.po 2017-04-04 11:05:27.615143052 +0200 @@ -6671,7 +6671,7 @@ #: util/grub-mkconfig.in:271 msgid "" "Syntax errors are detected in generated GRUB config file.\n" -"Ensure that there are no errors in /etc/default/grub\n" +"Ensure that there are no errors in /etc/conf.d/grub\n" "and /etc/grub.d/* files or please file a bug report with\n" "%s file attached." msgstr "" diff -Naur grub-2.02~rc2/po/en@quot.gmo grub-2.02~rc2-magellan/po/en@quot.gmo --- grub-2.02~rc2/po/en@quot.gmo 2017-03-15 09:41:38.000000000 +0100 +++ grub-2.02~rc2-magellan/po/en@quot.gmo 2017-04-04 11:05:27.595143267 +0200 @@ -146,7 +146,7 @@ Specify filename.Specify hash to use.Specify one or more font files to load.Specify size for each read operationSpecify the number of input files.Speed: %s Start GDB stub on given portStop GDB stubStorage information for `%s' does not include typeStorage information for `%s' indicates neither a plain partition nor a plain diskStore matched component NUMBER in VARNAME.SuccessSundaySuppress normal output (warnings remain).Switch to native disk drivers. If no modules are specified default set (pata,ahci,usbms,ohci,uhci,ehci) is usedSyntax error at line %u Syntax errors are detected in generated GRUB config file. -Ensure that there are no errors in /etc/default/grub +Ensure that there are no errors in /etc/conf.d/grub and /etc/grub.d/* files or please file a bug report with %s file attached.System management bus controller I/O space is at 0x%x TTARGETTHEMESTarget format not specified (use the -O option).Terminal has specified geometry.Terminal is ASCII-only [default].Terminal is logical-ordered UTF-8.Terminal is visually-ordered UTF-8.Test USB support.Test bit at BYTE:BIT in CMOS.Test file read speed.Test if REGEXP matches STRING.Test video subsystem in mode WxH.Test video subsystem.Text-only The files are identical. @@ -297,7 +297,7 @@ Specify filename.Specify hash to use.Specify one or more font files to load.Specify size for each read operationSpecify the number of input files.Speed: %s Start GDB stub on given portStop GDB stubStorage information for ‘%s’ does not include typeStorage information for ‘%s’ indicates neither a plain partition nor a plain diskStore matched component NUMBER in VARNAME.SuccessSundaySuppress normal output (warnings remain).Switch to native disk drivers. If no modules are specified default set (pata,ahci,usbms,ohci,uhci,ehci) is usedSyntax error at line %u Syntax errors are detected in generated GRUB config file. -Ensure that there are no errors in /etc/default/grub +Ensure that there are no errors in /etc/conf.d/grub and /etc/grub.d/* files or please file a bug report with %s file attached.System management bus controller I/O space is at 0x%x TTARGETTHEMESTarget format not specified (use the -O option).Terminal has specified geometry.Terminal is ASCII-only [default].Terminal is logical-ordered UTF-8.Terminal is visually-ordered UTF-8.Test USB support.Test bit at BYTE:BIT in CMOS.Test file read speed.Test if REGEXP matches STRING.Test video subsystem in mode WxH.Test video subsystem.Text-only The files are identical. diff -Naur grub-2.02~rc2/po/en@quot.po grub-2.02~rc2-magellan/po/en@quot.po --- grub-2.02~rc2/po/en@quot.po 2017-03-15 09:41:33.000000000 +0100 +++ grub-2.02~rc2-magellan/po/en@quot.po 2017-04-04 11:05:27.644142739 +0200 @@ -6545,12 +6545,12 @@ #: util/grub-mkconfig.in:271 msgid "" "Syntax errors are detected in generated GRUB config file.\n" -"Ensure that there are no errors in /etc/default/grub\n" +"Ensure that there are no errors in /etc/conf.d/grub\n" "and /etc/grub.d/* files or please file a bug report with\n" "%s file attached." msgstr "" "Syntax errors are detected in generated GRUB config file.\n" -"Ensure that there are no errors in /etc/default/grub\n" +"Ensure that there are no errors in /etc/conf.d/grub\n" "and /etc/grub.d/* files or please file a bug report with\n" "%s file attached." diff -Naur grub-2.02~rc2/po/eo.po grub-2.02~rc2-magellan/po/eo.po --- grub-2.02~rc2/po/eo.po 2017-03-15 09:41:33.000000000 +0100 +++ grub-2.02~rc2-magellan/po/eo.po 2017-04-04 11:05:27.559143655 +0200 @@ -6478,7 +6478,7 @@ #: util/grub-mkconfig.in:271 msgid "" "Syntax errors are detected in generated GRUB config file.\n" -"Ensure that there are no errors in /etc/default/grub\n" +"Ensure that there are no errors in /etc/conf.d/grub\n" "and /etc/grub.d/* files or please file a bug report with\n" "%s file attached." msgstr "" diff -Naur grub-2.02~rc2/po/es.gmo grub-2.02~rc2-magellan/po/es.gmo --- grub-2.02~rc2/po/es.gmo 2017-03-15 09:41:38.000000000 +0100 +++ grub-2.02~rc2-magellan/po/es.gmo 2017-04-04 11:05:27.739141715 +0200 @@ -142,7 +142,7 @@ Specify filename.Specify hash to use.Specify one or more font files to load.Specify size for each read operationSpecify the number of input files.Speed: %s Start GDB stub on given portStop GDB stubStorage information for `%s' does not include typeStorage information for `%s' indicates neither a plain partition nor a plain diskStore matched component NUMBER in VARNAME.SuccessSundaySuppress normal output (warnings remain).Switch to native disk drivers. If no modules are specified default set (pata,ahci,usbms,ohci,uhci,ehci) is usedSyntax error at line %u Syntax errors are detected in generated GRUB config file. -Ensure that there are no errors in /etc/default/grub +Ensure that there are no errors in /etc/conf.d/grub and /etc/grub.d/* files or please file a bug report with %s file attached.System management bus controller I/O space is at 0x%x TTARGETTHEMESTarget format not specified (use the -O option).Terminal has specified geometry.Terminal is ASCII-only [default].Terminal is logical-ordered UTF-8.Terminal is visually-ordered UTF-8.Test USB support.Test bit at BYTE:BIT in CMOS.Test file read speed.Test if REGEXP matches STRING.Test video subsystem in mode WxH.Test video subsystem.Text-only The files are identical. @@ -299,7 +299,7 @@ Inicia el soporte de GDB en el puerto proporcionadoPara el soporte de GFBLa información de almacenamiento para «%s» no incluye el tipoLa información de almacenamiento para «%s» no indica ni una partición ni un discoAlmacena la componente correspondiente NÚMERO en VARIABLE.ÉxitoDomingoSilencia la salida normal (los avisos permanecen).Utiliza los controladores de disco nativos. Si no se especifíca ningún módulo se utilizará el conjunto por defecto (pata, ahci, usbms, ohci, ehci)Error de sintaxis en la línea %u Se han detectado errores de sintaxis en el fichero de configuración de GRUB generado. -Asegurese de que no hay errores en /etc/default/grub +Asegurese de que no hay errores en /etc/conf.d/grub en los ficheros /etc/grub.d/* o, por favor, abra una notificación de errores con el fichero %s adjunto.El espacio del sistema de gestión de control del bus I/O está en 0x%x TOBJETIVOTEMASNo se ha especificado el formato objetivo (use la opción -O).El terminal ha especificado su geometría.El terminal es únicamente ASCII [predeterminado].El terminal es UTF-8 lógicamente ordenado.El terminal es UTF-8 visualmente ordenado.Comprueba el soporte USB.Comprueba el bit de la CMOS en BYTE:BIT.Prueba la velocidad de lectura de fichero.Comprueba si la EXPR_REGULAR acepta la CADENA.Prueba el subsistema de vídeo con modo ANCHOxALTOPrueba el subsistema de vídeo.Solo texto Los ficheros son idénticos. diff -Naur grub-2.02~rc2/po/es.po grub-2.02~rc2-magellan/po/es.po --- grub-2.02~rc2/po/es.po 2017-03-15 09:41:33.000000000 +0100 +++ grub-2.02~rc2-magellan/po/es.po 2017-04-04 11:05:27.878140218 +0200 @@ -6721,13 +6721,13 @@ #: util/grub-mkconfig.in:271 msgid "" "Syntax errors are detected in generated GRUB config file.\n" -"Ensure that there are no errors in /etc/default/grub\n" +"Ensure that there are no errors in /etc/conf.d/grub\n" "and /etc/grub.d/* files or please file a bug report with\n" "%s file attached." msgstr "" "Se han detectado errores de sintaxis en el fichero de\n" "configuración de GRUB generado.\n" -"Asegurese de que no hay errores en /etc/default/grub\n" +"Asegurese de que no hay errores en /etc/conf.d/grub\n" "en los ficheros /etc/grub.d/* o, por favor, abra una\n" "notificación de errores con el fichero %s adjunto." diff -Naur grub-2.02~rc2/po/fi.gmo grub-2.02~rc2-magellan/po/fi.gmo --- grub-2.02~rc2/po/fi.gmo 2017-03-15 09:41:38.000000000 +0100 +++ grub-2.02~rc2-magellan/po/fi.gmo 2017-04-04 11:05:27.635142836 +0200 @@ -133,7 +133,7 @@ Specify filename.Specify hash to use.Specify one or more font files to load.Specify size for each read operationSpecify the number of input files.Speed: %s Start GDB stub on given portStop GDB stubStorage information for `%s' does not include typeStorage information for `%s' indicates neither a plain partition nor a plain diskStore matched component NUMBER in VARNAME.SuccessSundaySuppress normal output (warnings remain).Switch to native disk drivers. If no modules are specified default set (pata,ahci,usbms,ohci,uhci,ehci) is usedSyntax error at line %u Syntax errors are detected in generated GRUB config file. -Ensure that there are no errors in /etc/default/grub +Ensure that there are no errors in /etc/conf.d/grub and /etc/grub.d/* files or please file a bug report with %s file attached.System management bus controller I/O space is at 0x%x TTARGETTHEMESTarget format not specified (use the -O option).Terminal has specified geometry.Terminal is ASCII-only [default].Terminal is logical-ordered UTF-8.Terminal is visually-ordered UTF-8.Test USB support.Test bit at BYTE:BIT in CMOS.Test file read speed.Test if REGEXP matches STRING.Test video subsystem in mode WxH.Test video subsystem.Text-only The files are identical. @@ -288,7 +288,7 @@ Määrittele tiedostonimi.Määritä käytettävä hajakoodaus.Määritä yksi tai useampia kirjasintiedostoja ladattavaksi.Määritä koko jokaiselle lukutoiminnolleMääritä syötetiedostojen lukumäärä.Nopeus: %s Käynnistä GDB-tynkä annetussa portissaPysäytä GDB-tynkäTallennusvälinetieto ”%s” ei sisällä tyyppiäVarastotieto kohteelle ”%s” ei osoita pelkkää osioita eikä pelkkää levyäTallenna täsmäävä komponentti-NUMERO muuttujaan VARNAME.OnnistuiSunnuntaiVaienna normaalituloste (varoitukset jäävät).Vaihda alkuperäisiin levyajureihin. Jos yhtään moduulia ei ole määritelty, käytetään oletusjoukkoa (pata,ahci,usbms,ohci,uhci,ehci)Syntaksivirhe rivillä %u Syntaksivirheita havaittu tuotettaessa GRUB-asetustiedostoa. -Varmista, että tiedostoissa /etc/default/grub ja /etc/grub.d/* +Varmista, että tiedostoissa /etc/conf.d/grub ja /etc/grub.d/* ei ole mitään virheitä tai tee vikailmoitus tiedosto %s liitteenä.Järjestelmähallintaväyläohjain siirräntätila on osoitteessa 0x%x TiKOHDETEEMATKohdemuotoa ei ole määritelty (käytä valitsinta -O).Päätteellä on määritelty geometria.Pääte on vain ASCII-pääte [oletus].Pääte on loogisesti järjestetty UTF-8.Pääte on visuaalisesti järjestetty UTF-8.Koesta USB-tuki.Testaa bitti BYTE:BIT CMOS-muistissa.Testaa tiedoston lukunopeusKoesta, jos REGEXP-lauseke täsmää MERKKIJONOon.Koesta video-alijärjestelmä WxH-tilassa.Koesta video-alijärjestelmä.Vain teksti Tiedostot ovat identtiset. diff -Naur grub-2.02~rc2/po/fi.po grub-2.02~rc2-magellan/po/fi.po --- grub-2.02~rc2/po/fi.po 2017-03-15 09:41:33.000000000 +0100 +++ grub-2.02~rc2-magellan/po/fi.po 2017-04-04 11:05:27.895140034 +0200 @@ -6619,12 +6619,12 @@ #: util/grub-mkconfig.in:271 msgid "" "Syntax errors are detected in generated GRUB config file.\n" -"Ensure that there are no errors in /etc/default/grub\n" +"Ensure that there are no errors in /etc/conf.d/grub\n" "and /etc/grub.d/* files or please file a bug report with\n" "%s file attached." msgstr "" "Syntaksivirheita havaittu tuotettaessa GRUB-asetustiedostoa.\n" -"Varmista, että tiedostoissa /etc/default/grub ja /etc/grub.d/*\n" +"Varmista, että tiedostoissa /etc/conf.d/grub ja /etc/grub.d/*\n" "ei ole mitään virheitä tai tee vikailmoitus tiedosto %s\n" "liitteenä." diff -Naur grub-2.02~rc2/po/fr.gmo grub-2.02~rc2-magellan/po/fr.gmo --- grub-2.02~rc2/po/fr.gmo 2017-03-15 09:41:38.000000000 +0100 +++ grub-2.02~rc2-magellan/po/fr.gmo 2017-04-04 11:05:27.606143149 +0200 @@ -144,7 +144,7 @@ Specify filename.Specify hash to use.Specify one or more font files to load.Specify size for each read operationSpecify the number of input files.Speed: %s Start GDB stub on given portStop GDB stubStorage information for `%s' does not include typeStorage information for `%s' indicates neither a plain partition nor a plain diskStore matched component NUMBER in VARNAME.SuccessSundaySuppress normal output (warnings remain).Switch to native disk drivers. If no modules are specified default set (pata,ahci,usbms,ohci,uhci,ehci) is usedSyntax error at line %u Syntax errors are detected in generated GRUB config file. -Ensure that there are no errors in /etc/default/grub +Ensure that there are no errors in /etc/conf.d/grub and /etc/grub.d/* files or please file a bug report with %s file attached.System management bus controller I/O space is at 0x%x TTARGETTHEMESTarget format not specified (use the -O option).Terminal has specified geometry.Terminal is ASCII-only [default].Terminal is logical-ordered UTF-8.Terminal is visually-ordered UTF-8.Test USB support.Test bit at BYTE:BIT in CMOS.Test file read speed.Test if REGEXP matches STRING.Test video subsystem in mode WxH.Test video subsystem.Text-only The files are identical. @@ -298,7 +298,7 @@ Démarrer la session GDB sur le port indiqué.Arrêter la session GDBLes renseignements de stockage pour « %s » ne contiennent pas le typeLes renseignements de stockage pour « %s » n’indiquent ni une simple partition, ni un simple disqueSauver le composant NOMBRE correspondant dans NOM_VAR.RéussitedimancheSupprimer la sortie normale (les avertissements sont conservés).Basculer vers les pilotes natifs de disque. Si aucun module n'est indiqué, l'ensemble par défaut (pata,ahci,usbms,ohci,uhci,ehci) est utiliséErreur de syntaxe à la ligne %u Des erreurs de syntaxe sont détectées dans le fichier de configuration de GRUB. Veuillez vérifier qu'il n'y a pas d'erreur dans les fichiers -/etc/default/grub et /etc/grub.d/*. Sinon veuillez signaler un bogue +/etc/conf.d/grub et /etc/grub.d/*. Sinon veuillez signaler un bogue en joignant le fichier %s.L'espace d'E/S du contrôleur de bus du système de gestion est à 0x%x  TiCIBLETHÈMESFormat cible non indiqué (utiliser l'option -O).Le terminal a la géométrie indiquée.Le terminal est en ASCII seulement [par défaut].Le terminal est en UTF-8 ordonné logiquement.Le terminal est en UTF-8 ordonné visuellement.Tester la prise en charge de l'USB.Tester le bit à OCTET:BIT du CMOS.Tester la vitesse de lecture du fichier.Tester si l'expression rationnelle EXPR_RAT correspond à CHAÎNE.Tester le sous-système vidéo en mode LARG×HAUT.Tester le sous-système vidéo.Texte seul Les fichiers sont identiques. L'entrée sélectionnée sera exécutée automatiquement dans %d s.Ce VDEV est un RAIDZ%llu diff -Naur grub-2.02~rc2/po/fr.po grub-2.02~rc2-magellan/po/fr.po --- grub-2.02~rc2/po/fr.po 2017-03-15 09:41:34.000000000 +0100 +++ grub-2.02~rc2-magellan/po/fr.po 2017-04-04 11:05:27.766141425 +0200 @@ -6683,13 +6683,13 @@ #: util/grub-mkconfig.in:271 msgid "" "Syntax errors are detected in generated GRUB config file.\n" -"Ensure that there are no errors in /etc/default/grub\n" +"Ensure that there are no errors in /etc/conf.d/grub\n" "and /etc/grub.d/* files or please file a bug report with\n" "%s file attached." msgstr "" "Des erreurs de syntaxe sont détectées dans le fichier de configuration\n" "de GRUB. Veuillez vérifier qu'il n'y a pas d'erreur dans les fichiers\n" -"/etc/default/grub et /etc/grub.d/*. Sinon veuillez signaler un bogue\n" +"/etc/conf.d/grub et /etc/grub.d/*. Sinon veuillez signaler un bogue\n" "en joignant le fichier %s." #: util/grub-mkconfig.in:283 diff -Naur grub-2.02~rc2/po/gl.gmo grub-2.02~rc2-magellan/po/gl.gmo --- grub-2.02~rc2/po/gl.gmo 2017-03-15 09:41:38.000000000 +0100 +++ grub-2.02~rc2-magellan/po/gl.gmo 2017-04-04 11:05:27.605143160 +0200 @@ -127,7 +127,7 @@ Some Hurd stuff found, but not enough to boot.Specify filename.Specify hash to use.Specify one or more font files to load.Specify size for each read operationSpecify the number of input files.Speed: %s Start GDB stub on given portStop GDB stubStore matched component NUMBER in VARNAME.SuccessSundaySuppress normal output (warnings remain).Switch to native disk drivers. If no modules are specified default set (pata,ahci,usbms,ohci,uhci,ehci) is usedSyntax error at line %u Syntax errors are detected in generated GRUB config file. -Ensure that there are no errors in /etc/default/grub +Ensure that there are no errors in /etc/conf.d/grub and /etc/grub.d/* files or please file a bug report with %s file attached.System management bus controller I/O space is at 0x%x TTARGETTarget format not specified (use the -O option).Terminal has specified geometry.Terminal is ASCII-only [default].Terminal is logical-ordered UTF-8.Terminal is visually-ordered UTF-8.Test USB support.Test bit at BYTE:BIT in CMOS.Test file read speed.Test if REGEXP matches STRING.Test video subsystem in mode WxH.Test video subsystem.Text-only The files are identical. @@ -260,7 +260,7 @@ Atopouse algo máis de Hurd pero non chega para arrancar.Especifique o nome do ficheiro.Especificar o hash para usar.Especifique un ou máis ficheiros de tipos de letra para cargar.Especifica o tamaño de cada operación de lecturaEspecificar o número de ficheiros de entrada.Velocidade: %s Arrancar o servizo GDB no porto dadoDeter o servizo GDBGardar o compoñente de NÚMERO EN NOMEVARIBEL.CorrectoDomingoSuprimir a saída normal (permanecen os avisos).Trocar para utilizar controladores de disco nativos. De non especificar módulos, utilizarase o conxunto predeterminado (pata, ahci, usbms, ohci, uhci, ehci)Erro sintáctico na liña %u Detectáronse erros sintácticos no ficheiro de configuración do GRUB xerado. -Asegúrese de que non hai erros en /etc/default/grub +Asegúrese de que non hai erros en /etc/conf.d/grub e nos ficheiros /etc/grub.d/* ou escriba un informe de erro co %s ficheiro anexado.O espazo do sistema de xestión do controlador de bus de E/S está en 0x%x TDESTINOFormato de destino non especificado (utilice a opción -O).O terminal especificou a xeometría.O terminal só é ASCII [predeterminado].O terminal é un UTF-8 ordenado loxicamente.O terminal é un UTF-8 visualmente ordenado.Comprobar se é compatíbel con USB.Probar bit en BYTE:BIT no CMOS.Velocidade de lectura do ficheiro de proba.Probar se REGEXP coincide con CADEA.Probar o subsistema de vídeo en modo LARGOxALTO.Comprobar o subsistema de vídeo.Só texto Os ficheiros son idénticos. diff -Naur grub-2.02~rc2/po/gl.po grub-2.02~rc2-magellan/po/gl.po --- grub-2.02~rc2/po/gl.po 2017-03-15 09:41:34.000000000 +0100 +++ grub-2.02~rc2-magellan/po/gl.po 2017-04-04 11:05:27.682142330 +0200 @@ -6645,12 +6645,12 @@ #: util/grub-mkconfig.in:271 msgid "" "Syntax errors are detected in generated GRUB config file.\n" -"Ensure that there are no errors in /etc/default/grub\n" +"Ensure that there are no errors in /etc/conf.d/grub\n" "and /etc/grub.d/* files or please file a bug report with\n" "%s file attached." msgstr "" "Detectáronse erros sintácticos no ficheiro de configuración do GRUB xerado.\n" -"Asegúrese de que non hai erros en /etc/default/grub\n" +"Asegúrese de que non hai erros en /etc/conf.d/grub\n" "e nos ficheiros /etc/grub.d/* ou escriba un informe de erro co\n" "%s ficheiro anexado." diff -Naur grub-2.02~rc2/po/grub.pot grub-2.02~rc2-magellan/po/grub.pot --- grub-2.02~rc2/po/grub.pot 2017-03-15 09:41:18.000000000 +0100 +++ grub-2.02~rc2-magellan/po/grub.pot 2017-04-04 11:05:27.719141931 +0200 @@ -6353,7 +6353,7 @@ #: util/grub-mkconfig.in:271 msgid "" "Syntax errors are detected in generated GRUB config file.\n" -"Ensure that there are no errors in /etc/default/grub\n" +"Ensure that there are no errors in /etc/conf.d/grub\n" "and /etc/grub.d/* files or please file a bug report with\n" "%s file attached." msgstr "" diff -Naur grub-2.02~rc2/po/hu.gmo grub-2.02~rc2-magellan/po/hu.gmo --- grub-2.02~rc2/po/hu.gmo 2017-03-15 09:41:38.000000000 +0100 +++ grub-2.02~rc2-magellan/po/hu.gmo 2017-04-04 11:05:27.549143763 +0200 @@ -146,7 +146,7 @@ Specify filename.Specify hash to use.Specify one or more font files to load.Specify size for each read operationSpecify the number of input files.Speed: %s Start GDB stub on given portStop GDB stubStorage information for `%s' does not include typeStorage information for `%s' indicates neither a plain partition nor a plain diskStore matched component NUMBER in VARNAME.SuccessSundaySuppress normal output (warnings remain).Switch to native disk drivers. If no modules are specified default set (pata,ahci,usbms,ohci,uhci,ehci) is usedSyntax error at line %u Syntax errors are detected in generated GRUB config file. -Ensure that there are no errors in /etc/default/grub +Ensure that there are no errors in /etc/conf.d/grub and /etc/grub.d/* files or please file a bug report with %s file attached.System management bus controller I/O space is at 0x%x TTARGETTHEMESTarget format not specified (use the -O option).Terminal has specified geometry.Terminal is ASCII-only [default].Terminal is logical-ordered UTF-8.Terminal is visually-ordered UTF-8.Test USB support.Test bit at BYTE:BIT in CMOS.Test file read speed.Test if REGEXP matches STRING.Test video subsystem in mode WxH.Test video subsystem.Text-only The files are identical. @@ -294,7 +294,7 @@ Fájlnév megadása.Használandó hash megadása.Adjon meg legalább egy betöltendő betűkészletfájlt.Méret meghatározása minden olvasási műveletnélA bemeneti fájlok számának megadása.Sebesség: %s GDB csonk indítása a megadott portonGDB csonk leállításaA(z) „%s” tároló-információi nem tartalmaznak típustA(z) „%s” tároló-információi nem jeleznek sem egyszerű partíciót, sem egyszerű lemeztAz egyező komponens SZÁM tárolása a VÁLTOZÓNÉVBEN.SikerültVasárnapNormál kimenet elnyomása (a figyelmeztetések maradnak).Átváltás natív lemezmeghajtókra. Ha nincs modul megadva, az alapértelmezett beállítás (pata,ahci,usbms,ohci,uhci,ehci) lesz használvaSzintaktikai hiba a(z) %u. sorban Szintaktikai hibák találhatók az előállított GRUB beállítófájlban. -Győződjön meg arról, hogy nincsenek hibák a /etc/default/grub +Győződjön meg arról, hogy nincsenek hibák a /etc/conf.d/grub és a /etc/grub.d/* fájlokban, vagy küldjön egy hibajelentést a(z) %s fájllal mellékelve.Rendszerkezelő buszvezérlő I/O tér van itt: 0x%x TCÉLTÉMÁKA célformátum nincs megadva (használja a -O kapcsolót).A terminálnak adott geometriája van.A terminál csak ASCII [alapértelmezett].A terminál logikai sorrendű UTF-8.A terminál vizuális sorrendű UTF-8.USB-támogatás tesztelése.Bit tesztelése a CMOS BÁJT:BIT helyén.Fájl olvasási sebességének tesztelése.Annak tesztelése, hogy a REGKIF illeszkedik-e a SZÖVEGRE.Videoalrendszer tesztelése SzxM módban.Videoalrendszer tesztelése.Csak szöveg A fájlok teljesen egyformák. diff -Naur grub-2.02~rc2/po/hu.po grub-2.02~rc2-magellan/po/hu.po --- grub-2.02~rc2/po/hu.po 2017-03-15 09:41:34.000000000 +0100 +++ grub-2.02~rc2-magellan/po/hu.po 2017-04-04 11:05:27.783141241 +0200 @@ -6599,12 +6599,12 @@ #: util/grub-mkconfig.in:271 msgid "" "Syntax errors are detected in generated GRUB config file.\n" -"Ensure that there are no errors in /etc/default/grub\n" +"Ensure that there are no errors in /etc/conf.d/grub\n" "and /etc/grub.d/* files or please file a bug report with\n" "%s file attached." msgstr "" "Szintaktikai hibák találhatók az előállított GRUB beállítófájlban.\n" -"Győződjön meg arról, hogy nincsenek hibák a /etc/default/grub\n" +"Győződjön meg arról, hogy nincsenek hibák a /etc/conf.d/grub\n" "és a /etc/grub.d/* fájlokban, vagy küldjön egy hibajelentést a(z)\n" "%s fájllal mellékelve." diff -Naur grub-2.02~rc2/po/id.po grub-2.02~rc2-magellan/po/id.po --- grub-2.02~rc2/po/id.po 2017-03-15 09:41:34.000000000 +0100 +++ grub-2.02~rc2-magellan/po/id.po 2017-04-04 11:05:27.852140498 +0200 @@ -6638,7 +6638,7 @@ #: util/grub-mkconfig.in:271 msgid "" "Syntax errors are detected in generated GRUB config file.\n" -"Ensure that there are no errors in /etc/default/grub\n" +"Ensure that there are no errors in /etc/conf.d/grub\n" "and /etc/grub.d/* files or please file a bug report with\n" "%s file attached." msgstr "" diff -Naur grub-2.02~rc2/po/it.gmo grub-2.02~rc2-magellan/po/it.gmo --- grub-2.02~rc2/po/it.gmo 2017-03-15 09:41:39.000000000 +0100 +++ grub-2.02~rc2-magellan/po/it.gmo 2017-04-04 11:05:27.843140595 +0200 @@ -145,7 +145,7 @@ Specify filename.Specify hash to use.Specify one or more font files to load.Specify size for each read operationSpecify the number of input files.Speed: %s Start GDB stub on given portStop GDB stubStorage information for `%s' does not include typeStorage information for `%s' indicates neither a plain partition nor a plain diskStore matched component NUMBER in VARNAME.SuccessSundaySuppress normal output (warnings remain).Switch to native disk drivers. If no modules are specified default set (pata,ahci,usbms,ohci,uhci,ehci) is usedSyntax error at line %u Syntax errors are detected in generated GRUB config file. -Ensure that there are no errors in /etc/default/grub +Ensure that there are no errors in /etc/conf.d/grub and /etc/grub.d/* files or please file a bug report with %s file attached.System management bus controller I/O space is at 0x%x TTARGETTHEMESTarget format not specified (use the -O option).Terminal has specified geometry.Terminal is ASCII-only [default].Terminal is logical-ordered UTF-8.Terminal is visually-ordered UTF-8.Test USB support.Test bit at BYTE:BIT in CMOS.Test file read speed.Test if REGEXP matches STRING.Test video subsystem in mode WxH.Test video subsystem.Text-only The files are identical. @@ -300,7 +300,7 @@ Avvia stub GDB sulla porta fornitaFerma stub GDBLe informazioni di archiviazione per "%s" non comprendono il tipoLe informazioni di archiviazione per "%s" indicano una partizione o un disco normaleArchivia il corrispondente componente NUMERO in NOMEVARSuccessodomenicaElimina l'output normale (gli avvisi restano)Passa ai driver disco nativi; se nessun modulo è specificato viene usato l'insieme predefinito (pata,ahci,usbms,ohci,uhci,ehci)Errore di sintassi alla riga %u Errori di sintassi sono stati rilevati nel file di configurazione di GRUB generato. Assicurarsi che non vi siano errori in -/etc/default/grub e /etc/grub.d/* o segnalare un bug allegando +/etc/conf.d/grub e /etc/grub.d/* o segnalare un bug allegando il file %s.Lo spazio I/O del bus di controllo di sistema è a 0x%x TOBIETTIVOTEMIFormato dell'obiettivo non specificato (usare l'opzione -O).Il terminale ha la geometria specificataIl terminale è solamente ASCII [predefinito]Il terminale è UTF-8 in ordine logicoIl terminale è UTF-8 in ordine visualeVerifica il supporto USBVerifica il bit BYTE:BIT nel CMOSVerifica la velocità di lettura fileVerifica che REGEXP corrisponda a STRINGAVerifica il sottosistema video in modalità W×HVerifica il sottosistema videoSolo testoI file sono identici. La voce selezionata verrà avviata automaticamente in %ds.Questo VDEV è un RAIDZ%llu diff -Naur grub-2.02~rc2/po/it.po grub-2.02~rc2-magellan/po/it.po --- grub-2.02~rc2/po/it.po 2017-03-15 09:41:34.000000000 +0100 +++ grub-2.02~rc2-magellan/po/it.po 2017-04-04 11:05:27.826140778 +0200 @@ -6626,13 +6626,13 @@ #: util/grub-mkconfig.in:271 msgid "" "Syntax errors are detected in generated GRUB config file.\n" -"Ensure that there are no errors in /etc/default/grub\n" +"Ensure that there are no errors in /etc/conf.d/grub\n" "and /etc/grub.d/* files or please file a bug report with\n" "%s file attached." msgstr "" "Errori di sintassi sono stati rilevati nel file di configurazione\n" "di GRUB generato. Assicurarsi che non vi siano errori in\n" -"/etc/default/grub e /etc/grub.d/* o segnalare un bug allegando\n" +"/etc/conf.d/grub e /etc/grub.d/* o segnalare un bug allegando\n" "il file %s." #: util/grub-mkconfig.in:283 diff -Naur grub-2.02~rc2/po/ja.po grub-2.02~rc2-magellan/po/ja.po --- grub-2.02~rc2/po/ja.po 2017-03-15 09:41:34.000000000 +0100 +++ grub-2.02~rc2-magellan/po/ja.po 2017-04-04 11:05:27.623142966 +0200 @@ -6687,7 +6687,7 @@ #: util/grub-mkconfig.in:271 msgid "" "Syntax errors are detected in generated GRUB config file.\n" -"Ensure that there are no errors in /etc/default/grub\n" +"Ensure that there are no errors in /etc/conf.d/grub\n" "and /etc/grub.d/* files or please file a bug report with\n" "%s file attached." msgstr "" diff -Naur grub-2.02~rc2/po/ko.po grub-2.02~rc2-magellan/po/ko.po --- grub-2.02~rc2/po/ko.po 2017-03-15 09:41:35.000000000 +0100 +++ grub-2.02~rc2-magellan/po/ko.po 2017-04-04 11:05:27.842140606 +0200 @@ -6603,7 +6603,7 @@ #: util/grub-mkconfig.in:271 msgid "" "Syntax errors are detected in generated GRUB config file.\n" -"Ensure that there are no errors in /etc/default/grub\n" +"Ensure that there are no errors in /etc/conf.d/grub\n" "and /etc/grub.d/* files or please file a bug report with\n" "%s file attached." msgstr "" diff -Naur grub-2.02~rc2/po/lt.gmo grub-2.02~rc2-magellan/po/lt.gmo --- grub-2.02~rc2/po/lt.gmo 2017-03-15 09:41:39.000000000 +0100 +++ grub-2.02~rc2-magellan/po/lt.gmo 2017-04-04 11:05:27.596143257 +0200 @@ -125,7 +125,7 @@ Specify filename.Specify hash to use.Specify one or more font files to load.Specify size for each read operationSpeed: %s Storage information for `%s' does not include typeStorage information for `%s' indicates neither a plain partition nor a plain diskStore matched component NUMBER in VARNAME.SuccessSundaySuppress normal output (warnings remain).Switch to native disk drivers. If no modules are specified default set (pata,ahci,usbms,ohci,uhci,ehci) is usedSyntax error at line %u Syntax errors are detected in generated GRUB config file. -Ensure that there are no errors in /etc/default/grub +Ensure that there are no errors in /etc/conf.d/grub and /etc/grub.d/* files or please file a bug report with %s file attached.System management bus controller I/O space is at 0x%x TTHEMESTerminal is ASCII-only [default].Test USB support.Test bit at BYTE:BIT in CMOS.Test file read speed.Test if REGEXP matches STRING.Test video subsystem in mode WxH.Test video subsystem.Text-only The files are identical. @@ -255,7 +255,7 @@ Nurodyti failo vardą.Nurodykite naudotiną maišą.Nurodyti vieną ar daugiau įkeltinų failų.Nurodyti kiekvienos skaitymo operacijos dydįGreitis: %s Atminties įtaiso „%s“ informacijoje nepaminėtas tipasAtminties įtaiso „%s“ informacija nurodo, kad tai nei grynas skaidinys, nei grynas diskasĮrašyti atitikusį komponentą NUMERIS į KINTAMĄJĮ.PavykosekmadienisNerodyti įprasto išvedimo (rodyti tik įspėjimus).Naudoti paprastas disko įtaisų tvarkykles. Jei nenurodomi jokie moduliai, naudojamas numatytasis rinkinys (pata,ahci,usbms,ohci,uhci,ehci)Sintaksės klaida %u eilutėje Sukurtame GRUB konfigūracijos faile aptikta klaidų. -Įsitikinkite, ar nėra klaidų /etc/default/grub +Įsitikinkite, ar nėra klaidų /etc/conf.d/grub ir /etc/grub.d/* failuose arba praneškite apie klaidą prisegdami %s failą.Sistemos valdymo magistralės valdiklio įvesties/išvesties erdvė yra adresu 0x%x TAPIPAVIDALINIMAITerminalas yra grynai ASCII [numatytas].Išbandyti USB palaikymą.Patikrinti bito ties BAITAS:BITAS reikšmę CMOS'e.Patikrinti failo nuskaitymo greitį.Patikrinti, ar REG_IŠRAIŠKA atitinka EILUTĘ.Išbandyti vaizdo posistemę PLOTIS×AUKŠTIS veiksenoje.Išbandyti vaizdo posistemę.Tik tekstas Failai yra vienodi. diff -Naur grub-2.02~rc2/po/lt.po grub-2.02~rc2-magellan/po/lt.po --- grub-2.02~rc2/po/lt.po 2017-03-15 09:41:35.000000000 +0100 +++ grub-2.02~rc2-magellan/po/lt.po 2017-04-04 11:05:27.860140412 +0200 @@ -6526,12 +6526,12 @@ #: util/grub-mkconfig.in:271 msgid "" "Syntax errors are detected in generated GRUB config file.\n" -"Ensure that there are no errors in /etc/default/grub\n" +"Ensure that there are no errors in /etc/conf.d/grub\n" "and /etc/grub.d/* files or please file a bug report with\n" "%s file attached." msgstr "" "Sukurtame GRUB konfigūracijos faile aptikta klaidų.\n" -"Įsitikinkite, ar nėra klaidų /etc/default/grub\n" +"Įsitikinkite, ar nėra klaidų /etc/conf.d/grub\n" "ir /etc/grub.d/* failuose arba praneškite apie klaidą\n" "prisegdami %s failą." diff -Naur grub-2.02~rc2/po/nb.gmo grub-2.02~rc2-magellan/po/nb.gmo --- grub-2.02~rc2/po/nb.gmo 2017-03-15 09:41:39.000000000 +0100 +++ grub-2.02~rc2-magellan/po/nb.gmo 2017-04-04 11:05:27.729141823 +0200 @@ -146,7 +146,7 @@ Specify filename.Specify hash to use.Specify one or more font files to load.Specify size for each read operationSpecify the number of input files.Speed: %s Start GDB stub on given portStop GDB stubStorage information for `%s' does not include typeStorage information for `%s' indicates neither a plain partition nor a plain diskStore matched component NUMBER in VARNAME.SuccessSundaySuppress normal output (warnings remain).Switch to native disk drivers. If no modules are specified default set (pata,ahci,usbms,ohci,uhci,ehci) is usedSyntax error at line %u Syntax errors are detected in generated GRUB config file. -Ensure that there are no errors in /etc/default/grub +Ensure that there are no errors in /etc/conf.d/grub and /etc/grub.d/* files or please file a bug report with %s file attached.System management bus controller I/O space is at 0x%x TTARGETTHEMESTarget format not specified (use the -O option).Terminal has specified geometry.Terminal is ASCII-only [default].Terminal is logical-ordered UTF-8.Terminal is visually-ordered UTF-8.Test USB support.Test bit at BYTE:BIT in CMOS.Test file read speed.Test if REGEXP matches STRING.Test video subsystem in mode WxH.Test video subsystem.Text-only The files are identical. @@ -299,7 +299,7 @@ Velg filnavn.Velg hvilken nøkkel som skal brukes.Velg én eller flere skrifttype-filer som skal lastes inn.Velg hvor stor hver leseoperasjon skal væreVelg antall inndatafiler.Hastighet: %s Start GDB-test på valgt portStans GDB-testingLagringsinformasjon for «%s» inneholder ikke typeLagringsinformasjon for «%s» tilsier hverken ren partisjon eller ren diskLagre samsvarende komponent-TALL i VARNAVN.VellykketsøndagIkke vis vanlig utskrift (advarsler skrives fremdeles ut).Bytt til innebygde diskdrivere. Hvis ingen moduler er valgt, brukes standardsett (pata,ahci,usbms,ohci,uhci,ehci)Syntaksfeil ved linje %u Generert GRUB-oppsettsfil inneholder syntaksfeil. -Kontroller at grunnlaget i /etc/default/grub og /etc/grub.d/* +Kontroller at grunnlaget i /etc/conf.d/grub og /etc/grub.d/* ikke innheholder feil, og send inn en feilrapport med %s vedlagt hvis du fremdeles har problemer.Inn-/utdataområde for kontrollenhet for systemhåndteringsbuss ligger ved 0x%x TMÅLTEMAERDu har ikke valgt målformat (bruk valget «-O»).Terminalen har spesifisert størrelse.Terminalen bruker kun ASCII [standard].Terminalen bruker logisk sortert UTF-8.Terminalen bruker visuelt sortert UTF-8.Test USB-støtte.Test bit ved BYTE:BIT i CMOS.Test lesehastighet på fil.Sjekk om REG_UTTR samsvarer med STRENG.Test video-undersystem i modus BreddexHøyde.Test video-undersystem.Bare tekstFilene er identiske. diff -Naur grub-2.02~rc2/po/nb.po grub-2.02~rc2-magellan/po/nb.po --- grub-2.02~rc2/po/nb.po 2017-03-15 09:41:35.000000000 +0100 +++ grub-2.02~rc2-magellan/po/nb.po 2017-04-04 11:05:27.592143300 +0200 @@ -6563,12 +6563,12 @@ #: util/grub-mkconfig.in:271 msgid "" "Syntax errors are detected in generated GRUB config file.\n" -"Ensure that there are no errors in /etc/default/grub\n" +"Ensure that there are no errors in /etc/conf.d/grub\n" "and /etc/grub.d/* files or please file a bug report with\n" "%s file attached." msgstr "" "Generert GRUB-oppsettsfil inneholder syntaksfeil.\n" -"Kontroller at grunnlaget i /etc/default/grub og /etc/grub.d/*\n" +"Kontroller at grunnlaget i /etc/conf.d/grub og /etc/grub.d/*\n" "ikke innheholder feil, og send inn en feilrapport\n" "med %s vedlagt hvis du fremdeles har problemer." diff -Naur grub-2.02~rc2/po/nl.gmo grub-2.02~rc2-magellan/po/nl.gmo --- grub-2.02~rc2/po/nl.gmo 2017-03-15 09:41:39.000000000 +0100 +++ grub-2.02~rc2-magellan/po/nl.gmo 2017-04-04 11:05:27.704142093 +0200 @@ -144,7 +144,7 @@ Specify filename.Specify hash to use.Specify one or more font files to load.Specify size for each read operationSpecify the number of input files.Speed: %s Start GDB stub on given portStop GDB stubStorage information for `%s' does not include typeStorage information for `%s' indicates neither a plain partition nor a plain diskStore matched component NUMBER in VARNAME.SuccessSundaySuppress normal output (warnings remain).Switch to native disk drivers. If no modules are specified default set (pata,ahci,usbms,ohci,uhci,ehci) is usedSyntax error at line %u Syntax errors are detected in generated GRUB config file. -Ensure that there are no errors in /etc/default/grub +Ensure that there are no errors in /etc/conf.d/grub and /etc/grub.d/* files or please file a bug report with %s file attached.System management bus controller I/O space is at 0x%x TTARGETTHEMESTarget format not specified (use the -O option).Terminal has specified geometry.Terminal is ASCII-only [default].Terminal is logical-ordered UTF-8.Terminal is visually-ordered UTF-8.Test USB support.Test bit at BYTE:BIT in CMOS.Test file read speed.Test if REGEXP matches STRING.Test video subsystem in mode WxH.Test video subsystem.Text-only The files are identical. @@ -306,7 +306,7 @@ Bestandsnaam opgeven.Te gebruiken hash.Te laden lettertypebestanden.Grootte opgeven voor elke leesoperatieTe gebruiken aantal invoerbestanden.Snelheid: %s GDB-stub starten op de gegeven poortGDB-stub stoppenOpslaginformatie voor '%s' bevat niet het typeOpslaginformatie voor '%s' geeft noch een gewone partitie noch een gewone schijf aanOvereenkomende component (met dit NUMMER) opslaan in VARNAAM.GeluktzondagGewone uitvoer onderdrukken (maar waarschuwingen niet).Naar originele schijfstuurprogramma's overschakelen. Als er geen modules gegeven zijn, dan wordt de standaardset (pata,ahci,usbms,ohci,uhci,ehci) gebruikt.Syntaxfout in regelnummer %u Er zijn syntaxfouten gevonden in het aangemaakte GRUB-configuratiebestand. -Verzeker u ervan dat er geen fouten zitten in het bestand /etc/default/grub +Verzeker u ervan dat er geen fouten zitten in het bestand /etc/conf.d/grub noch in de bestanden in /etc/grub.d/. Rapporteer anders een fout, met het bestand %s als bijlage.I/O-ruimte van SMBus-controller is op 0x%x TDOELTHEMA'SDoelindeling is niet gegeven (gebruik optie '-O').De terminal heeft de gegeven afmetingen.De terminal is alleen-ASCII [standaard].De terminal is logisch-geordende UTF-8.De terminal is visueel-geordende UTF-8.USB-ondersteuning testen.Een bit testen op positie BYTE:BIT in CMOS.Leessnelheid van bestanden testen.Controleren of reguliere expressie REGEXP overeenkomt met TEKENREEKS.Video-subsysteem testen in modus BxH.Video-subsysteem testen.Alleen tekst De bestanden zijn identiek. diff -Naur grub-2.02~rc2/po/nl.po grub-2.02~rc2-magellan/po/nl.po --- grub-2.02~rc2/po/nl.po 2017-03-15 09:41:35.000000000 +0100 +++ grub-2.02~rc2-magellan/po/nl.po 2017-04-04 11:05:27.792141144 +0200 @@ -6628,12 +6628,12 @@ #: util/grub-mkconfig.in:271 msgid "" "Syntax errors are detected in generated GRUB config file.\n" -"Ensure that there are no errors in /etc/default/grub\n" +"Ensure that there are no errors in /etc/conf.d/grub\n" "and /etc/grub.d/* files or please file a bug report with\n" "%s file attached." msgstr "" "Er zijn syntaxfouten gevonden in het aangemaakte GRUB-configuratiebestand.\n" -"Verzeker u ervan dat er geen fouten zitten in het bestand /etc/default/grub\n" +"Verzeker u ervan dat er geen fouten zitten in het bestand /etc/conf.d/grub\n" "noch in de bestanden in /etc/grub.d/. Rapporteer anders een fout, met het\n" "bestand %s als bijlage." diff -Naur grub-2.02~rc2/po/pa.po grub-2.02~rc2-magellan/po/pa.po --- grub-2.02~rc2/po/pa.po 2017-03-15 09:41:35.000000000 +0100 +++ grub-2.02~rc2-magellan/po/pa.po 2017-04-04 11:05:27.604143170 +0200 @@ -6415,7 +6415,7 @@ #: util/grub-mkconfig.in:271 msgid "" "Syntax errors are detected in generated GRUB config file.\n" -"Ensure that there are no errors in /etc/default/grub\n" +"Ensure that there are no errors in /etc/conf.d/grub\n" "and /etc/grub.d/* files or please file a bug report with\n" "%s file attached." msgstr "" diff -Naur grub-2.02~rc2/po/pl.gmo grub-2.02~rc2-magellan/po/pl.gmo --- grub-2.02~rc2/po/pl.gmo 2017-03-15 09:41:39.000000000 +0100 +++ grub-2.02~rc2-magellan/po/pl.gmo 2017-04-04 11:05:27.551143741 +0200 @@ -148,7 +148,7 @@ Specify filename.Specify hash to use.Specify one or more font files to load.Specify size for each read operationSpecify the number of input files.Speed: %s Start GDB stub on given portStop GDB stubStorage information for `%s' does not include typeStorage information for `%s' indicates neither a plain partition nor a plain diskStore matched component NUMBER in VARNAME.SuccessSundaySuppress normal output (warnings remain).Switch to native disk drivers. If no modules are specified default set (pata,ahci,usbms,ohci,uhci,ehci) is usedSyntax error at line %u Syntax errors are detected in generated GRUB config file. -Ensure that there are no errors in /etc/default/grub +Ensure that there are no errors in /etc/conf.d/grub and /etc/grub.d/* files or please file a bug report with %s file attached.System management bus controller I/O space is at 0x%x TTARGETTHEMESTarget format not specified (use the -O option).Terminal has specified geometry.Terminal is ASCII-only [default].Terminal is logical-ordered UTF-8.Terminal is visually-ordered UTF-8.Test USB support.Test bit at BYTE:BIT in CMOS.Test file read speed.Test if REGEXP matches STRING.Test video subsystem in mode WxH.Test video subsystem.Text-only The files are identical. @@ -301,7 +301,7 @@ Podaje nazwę pliku.Podaje sumę do użycia.Podaje jeden lub więcej plików czcionek do wczytania.Określa rozmiar dla każdej operacji odczytuPodaje liczbę plików wejściowych.Szybkość: %s Uruchamia zaślepkę GDB na podanym porcieZatrzymuje zaślepkę GDBInformacje o przestrzeni danych dla "%s" nie zawierają typuInformacje o przestrzeni danych dla "%s" nie określają zwykłej partycji ani zwykłego dyskuZapisuje NUMER dopasowanego elementu w ZMIENNEJ.SukcesNiedzielaOgranicza zwykłe wyjście (ostrzeżenia pozostają).Przełącza na natywne sterowniki dysku. Jeśli nie podano modułów, używany jest zestaw domyślny (pata,ahci,usbms,ohci,uhci,ehci)Błąd składni w linii %u W wygenerowanym pliku konfiguracyjnym GRUB-a wykryto błędy składni. -Proszę się upewnić, że w plikach /etc/default/grub oraz /etc/grub.d/* +Proszę się upewnić, że w plikach /etc/conf.d/grub oraz /etc/grub.d/* nie ma błędów lub wypełnić raport o błędzie z załączonym plikiem %s.Przestrzeń we/wy kontrolera SM-bus jest pod 0x%x TCELMOTYWYNie określono formatu docelowego (opcji -O).Terminal posiada podane wymiary.Terminal obsługuje tylko ASCII [domyślne].Terminal obsługuje logicznie porządkowane UTF-8.Terminal obsługuje wizualnie porządkowane UTF-8.Testuje obsługę USB.Sprawdza bit BAJT:BIT w CMOS-ie.Testuje szybkość odczytu pliku.Testuje, czy WYRAŻENIE_REGULARNE pasuje do CIĄGU.Testuje podsystem obrazu w trybie SxW.Testuje podsystem obrazu.Tylko tekstPliki są identyczne. Wyróżniony wpis zostanie wykonany automatycznie za %ds.To VDEV to RAIDZ%llu diff -Naur grub-2.02~rc2/po/pl.po grub-2.02~rc2-magellan/po/pl.po --- grub-2.02~rc2/po/pl.po 2017-03-15 09:41:35.000000000 +0100 +++ grub-2.02~rc2-magellan/po/pl.po 2017-04-04 11:05:27.634142847 +0200 @@ -6597,12 +6597,12 @@ #: util/grub-mkconfig.in:271 msgid "" "Syntax errors are detected in generated GRUB config file.\n" -"Ensure that there are no errors in /etc/default/grub\n" +"Ensure that there are no errors in /etc/conf.d/grub\n" "and /etc/grub.d/* files or please file a bug report with\n" "%s file attached." msgstr "" "W wygenerowanym pliku konfiguracyjnym GRUB-a wykryto błędy składni.\n" -"Proszę się upewnić, że w plikach /etc/default/grub oraz /etc/grub.d/*\n" +"Proszę się upewnić, że w plikach /etc/conf.d/grub oraz /etc/grub.d/*\n" "nie ma błędów lub wypełnić raport o błędzie z załączonym plikiem %s." #: util/grub-mkconfig.in:283 diff -Naur grub-2.02~rc2/po/pt_BR.po grub-2.02~rc2-magellan/po/pt_BR.po --- grub-2.02~rc2/po/pt_BR.po 2017-03-15 09:41:36.000000000 +0100 +++ grub-2.02~rc2-magellan/po/pt_BR.po 2017-04-04 11:05:27.692142222 +0200 @@ -6610,7 +6610,7 @@ #: util/grub-mkconfig.in:271 msgid "" "Syntax errors are detected in generated GRUB config file.\n" -"Ensure that there are no errors in /etc/default/grub\n" +"Ensure that there are no errors in /etc/conf.d/grub\n" "and /etc/grub.d/* files or please file a bug report with\n" "%s file attached." msgstr "" diff -Naur grub-2.02~rc2/po/ru.gmo grub-2.02~rc2-magellan/po/ru.gmo --- grub-2.02~rc2/po/ru.gmo 2017-03-15 09:41:39.000000000 +0100 +++ grub-2.02~rc2-magellan/po/ru.gmo 2017-04-04 11:05:27.741141694 +0200 @@ -146,7 +146,7 @@ Specify filename.Specify hash to use.Specify one or more font files to load.Specify size for each read operationSpecify the number of input files.Speed: %s Start GDB stub on given portStop GDB stubStorage information for `%s' does not include typeStorage information for `%s' indicates neither a plain partition nor a plain diskStore matched component NUMBER in VARNAME.SuccessSundaySuppress normal output (warnings remain).Switch to native disk drivers. If no modules are specified default set (pata,ahci,usbms,ohci,uhci,ehci) is usedSyntax error at line %u Syntax errors are detected in generated GRUB config file. -Ensure that there are no errors in /etc/default/grub +Ensure that there are no errors in /etc/conf.d/grub and /etc/grub.d/* files or please file a bug report with %s file attached.System management bus controller I/O space is at 0x%x TTARGETTHEMESTarget format not specified (use the -O option).Terminal has specified geometry.Terminal is ASCII-only [default].Terminal is logical-ordered UTF-8.Terminal is visually-ordered UTF-8.Test USB support.Test bit at BYTE:BIT in CMOS.Test file read speed.Test if REGEXP matches STRING.Test video subsystem in mode WxH.Test video subsystem.Text-only The files are identical. @@ -302,7 +302,7 @@ Указать имя файла.Использовать указанный хэш.Указать один или несколько файлов шрифтов для загрузки.Укажите объём данных каждой операции чтенияЗадать количество входных файлов.Скорость: %s Запустить заглушку GDB на указанном портуОстановить заглушку GDBИнформация о хранилище «%s» не содержит типВ информации о хранилище для «%s» должен быть указан обычный раздел или обычный дискСохранить совпавший компонент с НОМЕРОМ в ИМЯ_ПЕРЕМЕННОЙ.УспешноВоскресеньеНе показывать обычные сообщения (только предупреждения).Перейти на родные дисковые драйверы. Если модули не указаны, то используется набор по умолчанию (pata,ahci,usbms,ohci,uhci,ehci)Синтаксическая ошибка в строке %u В сгенерированном файле настроек GRUB обнаружены синтаксические ошибки. -Убедитесь, что в файлах /etc/default/grub +Убедитесь, что в файлах /etc/conf.d/grub и /etc/grub.d/* ошибки отсутствуют или пошлите сообщение об ошибке в прикреплённым файлом %s.Контроллер системной шины управления вводом-выводом находится по адресу 0x%x ТЦЕЛЬТЕМЫЦелевой формат не указан (используйте параметр -O).Терминал имеет указанные размеры.Терминал только в ASCII [по умолчанию].Терминал в логически упорядоченной UTF-8.Терминал в визуально упорядоченной UTF-8.Протестировать поддержку USB.Проверить бит по адресу БАЙТ:БИТ в CMOS.Тест скорости чтения файла.Проверить, совпадает ли РЕГВЫР со СТРОКОЙ.Тест видеоподсистемы в режиме ШxВ.Тест видеоподсистемы.Только-текст Файлы одинаковы. diff -Naur grub-2.02~rc2/po/ru.po grub-2.02~rc2-magellan/po/ru.po --- grub-2.02~rc2/po/ru.po 2017-03-15 09:41:36.000000000 +0100 +++ grub-2.02~rc2-magellan/po/ru.po 2017-04-04 11:05:27.728141834 +0200 @@ -6591,12 +6591,12 @@ #: util/grub-mkconfig.in:271 msgid "" "Syntax errors are detected in generated GRUB config file.\n" -"Ensure that there are no errors in /etc/default/grub\n" +"Ensure that there are no errors in /etc/conf.d/grub\n" "and /etc/grub.d/* files or please file a bug report with\n" "%s file attached." msgstr "" "В сгенерированном файле настроек GRUB обнаружены синтаксические ошибки.\n" -"Убедитесь, что в файлах /etc/default/grub\n" +"Убедитесь, что в файлах /etc/conf.d/grub\n" "и /etc/grub.d/* ошибки отсутствуют или пошлите сообщение об ошибке\n" "в прикреплённым файлом %s." diff -Naur grub-2.02~rc2/po/sl.gmo grub-2.02~rc2-magellan/po/sl.gmo --- grub-2.02~rc2/po/sl.gmo 2017-03-15 09:41:39.000000000 +0100 +++ grub-2.02~rc2-magellan/po/sl.gmo 2017-04-04 11:05:27.738141727 +0200 @@ -112,7 +112,7 @@ Shift positional parameters.Show ACPI information.Show APM information.Show a help message.Show a long list with more detailed information.Show contents of FILE in hex.Show loaded modules.Show memory contents.Show raw contents of ATA IDENTIFY sector.Show raw contents of a file or memory.Show the contents of a file.Show the current mappings.Show this message.Show version 1 tables only.Show version 2 and version 3 tables only.Shutdown failedSimulate grub-legacy `initrd' commandSimulate grub-legacy `kernel' commandSimulate grub-legacy `modulenounzip' commandSimulate grub-legacy `password' commandSimulate grub-legacy `password' command in menu entry modeSkip N bytes from output file.Skip offset bytes from the beginning of file.Slot %d opened Some Hurd stuff found, but not enough to boot.Specify filename.Specify hash to use.Specify one or more font files to load.Specify the number of input files.Start GDB stub on given portStop GDB stubStore matched component NUMBER in VARNAME.SuccessSundaySuppress normal output (warnings remain).Syntax error at line %u Syntax errors are detected in generated GRUB config file. -Ensure that there are no errors in /etc/default/grub +Ensure that there are no errors in /etc/conf.d/grub and /etc/grub.d/* files or please file a bug report with %s file attached.System management bus controller I/O space is at 0x%x TARGETTarget format not specified (use the -O option).Terminal has specified geometry.Terminal is ASCII-only [default].Terminal is logical-ordered UTF-8.Terminal is visually-ordered UTF-8.Test USB support.Test bit at BYTE:BIT in CMOS.Test if REGEXP matches STRING.Test video subsystem in mode WxH.Test video subsystem.Text-only The files are identical. @@ -238,7 +238,7 @@ Zamakni parametre položajev ...Pokaži podrobnosti ACPI.Pokaži podrobnosti APM.Prikaži sporočilo pomoči.Prikaži dolg seznam s podrobnejšimi podatki.Pokaže vsebino DATOTEKE v šestnajstiškem zapisu.Pokaži naložene module.Pokaži vsebino pomnilnika.Pokaži surovo vsebino odseka ATA IDENTIFY.Pokaži surovo vsebino datoteke ali pomnilnika.Pokaži vsebino datoteke.Pokaži trenutne preslikave.Pokaži to sporočilo.Pokaži le preglednice različice 1.Pokaži le preglednice različic 2 in 3.Izklop je spodletelSimulira ukaz `initrd' grub-legacySimulira ukaz `kernel' grub-legacySimulira ukaz `modulenounzip' grub-legacySimulira ukaz `password' grub-legacySimulira ukaz `password' grub-legacy v načinu vnosa menijevPreskoči N bajtov iz izhodne datoteke.Preskoči bajte odmika na začetku datoteke.Mesto %d je odprto Najdenih je nekaj stvari Hurd, vendar ne dovolj za zagon.Navedite ime datoteke.Navedite razpršilo za uporabo.Navedite eno ali več datotek pisav za nalaganje.Določi število vhodnih datotek.Zaženi GDB na danih vratihZaustavi nastavek GDBShramba se ujema s sestavnim delom ŠTEVILO v IMENU_SPREMENLJIVKEUspešno zaključenonedeljaPrepreči običajen izpis (opozorila ostanejo).Napaka skladnje v vrstici %u V ustvarjeni nastavitveni datoteki GRUB so zaznane napake - skladnje. Prepričajte se, da v datotekah /etc/default/grub in + skladnje. Prepričajte se, da v datotekah /etc/conf.d/grub in /etc/grub.d/* ni napak ali pa pošljite poročilo o hrošču s pripeto datoteko %s.Prostor V/I nadzornika upravljanja vodila je na 0x%x CILJCiljna oblika ni določena (uporabite možnost -O).Terminal ima določeno geometrijo.Terminal je le ASCII [privzeto].Terminal je logično urejen UTF-8.Terminal je vidno urejen UTF-8.Preizkusi podporo za USB.Preizkusi bit na BAJT:BIT v CMOS.Preizkusi, ali je REGEXP skladen z NIZEM.Preizkusi video podsistem v načinu WxH.Preizkusi video podsistem.Le besediloDatoteki sta enaki. diff -Naur grub-2.02~rc2/po/sl.po grub-2.02~rc2-magellan/po/sl.po --- grub-2.02~rc2/po/sl.po 2017-03-15 09:41:36.000000000 +0100 +++ grub-2.02~rc2-magellan/po/sl.po 2017-04-04 11:05:27.818140865 +0200 @@ -6607,12 +6607,12 @@ #: util/grub-mkconfig.in:271 msgid "" "Syntax errors are detected in generated GRUB config file.\n" -"Ensure that there are no errors in /etc/default/grub\n" +"Ensure that there are no errors in /etc/conf.d/grub\n" "and /etc/grub.d/* files or please file a bug report with\n" "%s file attached." msgstr "" "V ustvarjeni nastavitveni datoteki GRUB so zaznane napake\n" -" skladnje. Prepričajte se, da v datotekah /etc/default/grub in\n" +" skladnje. Prepričajte se, da v datotekah /etc/conf.d/grub in\n" "/etc/grub.d/* ni napak ali pa pošljite poročilo o hrošču s pripeto\n" "datoteko %s." diff -Naur grub-2.02~rc2/po/sr.gmo grub-2.02~rc2-magellan/po/sr.gmo --- grub-2.02~rc2/po/sr.gmo 2017-03-15 09:41:39.000000000 +0100 +++ grub-2.02~rc2-magellan/po/sr.gmo 2017-04-04 11:05:27.607143138 +0200 @@ -142,7 +142,7 @@ Specify filename.Specify hash to use.Specify one or more font files to load.Specify size for each read operationSpecify the number of input files.Speed: %s Start GDB stub on given portStop GDB stubStorage information for `%s' does not include typeStorage information for `%s' indicates neither a plain partition nor a plain diskStore matched component NUMBER in VARNAME.SuccessSundaySuppress normal output (warnings remain).Switch to native disk drivers. If no modules are specified default set (pata,ahci,usbms,ohci,uhci,ehci) is usedSyntax error at line %u Syntax errors are detected in generated GRUB config file. -Ensure that there are no errors in /etc/default/grub +Ensure that there are no errors in /etc/conf.d/grub and /etc/grub.d/* files or please file a bug report with %s file attached.System management bus controller I/O space is at 0x%x TTARGETTHEMESTarget format not specified (use the -O option).Terminal has specified geometry.Terminal is ASCII-only [default].Terminal is logical-ordered UTF-8.Terminal is visually-ordered UTF-8.Test USB support.Test bit at BYTE:BIT in CMOS.Test file read speed.Test if REGEXP matches STRING.Test video subsystem in mode WxH.Test video subsystem.Text-only The files are identical. @@ -293,7 +293,7 @@ Наводи назив датотеке.Наводи хеш за коришћење.Наводи једну или више датотека словних ликова за учитавање.Наводи величину за сваку радњу читањаНаводи број улазних датотека.Брзина: %s Покреће ГДБ одсечак на датом прикључникуЗауставља ГДБ одсечакПодаци складиштења за „%s“ не садрже врстуПодаци складиштења за „%s“ не указују ни на обичну партицију ни на обичан дискСмешта поклопљену компоненту БРОЈ у ПРОМЕНЉИВОЈ_НАЗИВА.УспешноНедељаПотискује обичан излаз (упозорења остају).Пребацује се на изворне управљачке програме диска. Ако нису наведени модули користи се основни скуп (pata,ahci,usbms,ohci,uhci,ehci)Грешка синтаксе у %u. реду Откривене су грешке синтаксе у створеној датотеци подешавања ГРУБ-а. -Проверите да ли има грешака у датотекама „/etc/default/grub“ +Проверите да ли има грешака у датотекама „/etc/conf.d/grub“ и „/etc/grub.d/*“ или попуните извештај о грешкама и приложите датотеку „%s“.У/И простор контролера сабирнице управљања системом је на 0x%x TМЕТАТЕМЕЦиљни запис није наведен (користите опцију „-O“).Терминал има наведену геометрију.Терминал је само АСКРИ [основно].Терминал је логички-уређени УТФ-8.Терминал је визуелно-уређени УТФ-8.Испробава УСБ подршку.Проверава бит на БАЈТУ:БИТУ у ЦМОС-у.Проверава брзину читања датотеке.Проба да ли РЕГИЗРАЗ одговара НИСКИ.Испробава подсистем снимка у режиму ШxВ.Испробава подсистем снимка.Само текст Датотеке су истоветне. diff -Naur grub-2.02~rc2/po/sr.po grub-2.02~rc2-magellan/po/sr.po --- grub-2.02~rc2/po/sr.po 2017-03-15 09:41:36.000000000 +0100 +++ grub-2.02~rc2-magellan/po/sr.po 2017-04-04 11:05:27.712142006 +0200 @@ -6577,12 +6577,12 @@ #: util/grub-mkconfig.in:271 msgid "" "Syntax errors are detected in generated GRUB config file.\n" -"Ensure that there are no errors in /etc/default/grub\n" +"Ensure that there are no errors in /etc/conf.d/grub\n" "and /etc/grub.d/* files or please file a bug report with\n" "%s file attached." msgstr "" "Откривене су грешке синтаксе у створеној датотеци подешавања ГРУБ-а.\n" -"Проверите да ли има грешака у датотекама „/etc/default/grub“\n" +"Проверите да ли има грешака у датотекама „/etc/conf.d/grub“\n" "и „/etc/grub.d/*“ или попуните извештај о грешкама\n" "и приложите датотеку „%s“." diff -Naur grub-2.02~rc2/po/sv.gmo grub-2.02~rc2-magellan/po/sv.gmo --- grub-2.02~rc2/po/sv.gmo 2017-03-15 09:41:39.000000000 +0100 +++ grub-2.02~rc2-magellan/po/sv.gmo 2017-04-04 11:05:27.655142621 +0200 @@ -137,7 +137,7 @@ Specify filename.Specify hash to use.Specify one or more font files to load.Specify size for each read operationSpecify the number of input files.Speed: %s Start GDB stub on given portStop GDB stubStorage information for `%s' does not include typeStorage information for `%s' indicates neither a plain partition nor a plain diskStore matched component NUMBER in VARNAME.SuccessSundaySuppress normal output (warnings remain).Switch to native disk drivers. If no modules are specified default set (pata,ahci,usbms,ohci,uhci,ehci) is usedSyntax error at line %u Syntax errors are detected in generated GRUB config file. -Ensure that there are no errors in /etc/default/grub +Ensure that there are no errors in /etc/conf.d/grub and /etc/grub.d/* files or please file a bug report with %s file attached.System management bus controller I/O space is at 0x%x TTARGETTHEMESTarget format not specified (use the -O option).Terminal has specified geometry.Terminal is ASCII-only [default].Terminal is logical-ordered UTF-8.Terminal is visually-ordered UTF-8.Test USB support.Test bit at BYTE:BIT in CMOS.Test file read speed.Test if REGEXP matches STRING.Test video subsystem in mode WxH.Test video subsystem.Text-only The files are identical. @@ -292,7 +292,7 @@ Ange filnamn.Ange hash att använda.Ange en eller flera typsnittsfiler att läsa in.Ange storlek för varje läsoperationSpecificera antalet inmatningsfiler.Hastighet: %s Starta GDB-stubbe på angiven portStoppa GDB-stubbeLagringsinformation för ”%s” inkluderar inte typLagringsinformationen för ”%s” indikerar varken en vanlig partition eller en vanlig diskLagra matchande komponent NUMMER i VARNAMN.LyckadesSöndagUndertryck vanlig utmatning (varningar återstår).Växla till inbyggda diskdrivrutiner. Om inga moduler anges som används (pata,ahci,usbms,ohci,uhci,ehci) som standardSyntaxfel på rad %u Syntaxfel upptäcktes i den genererade GRUB-konfigurationsfilen. -Kontrollera att det inte finns några fel i /etc/default/grub- +Kontrollera att det inte finns några fel i /etc/conf.d/grub- och /etc/grub.d/*-filerna eller skicka in en felrapport med bifogad %s-fil.Systemhanteringsbusskontrollerns I/O-utrymme är på 0x%x TMÅLTEMANMålformat inte specificerat (använd 0-alternativet).Terminalen har specificerat geometri.Terminalen är endast ASCII [standard].Terminal är logical-ordered UTF-8.Terminalen är visually-ordered UTF-8.Testa USB-stöd.Testa bit i BYTE:BIT i CMOS.Testa läshastighet för fil.Testa om REGEXP matchar STRÄNG.Testa videodelsystemet i läge WxH.Testa videodelsystemet.Endast textFilerna är identiska. diff -Naur grub-2.02~rc2/po/sv.po grub-2.02~rc2-magellan/po/sv.po --- grub-2.02~rc2/po/sv.po 2017-03-15 09:41:36.000000000 +0100 +++ grub-2.02~rc2-magellan/po/sv.po 2017-04-04 11:05:27.834140692 +0200 @@ -6561,12 +6561,12 @@ #: util/grub-mkconfig.in:271 msgid "" "Syntax errors are detected in generated GRUB config file.\n" -"Ensure that there are no errors in /etc/default/grub\n" +"Ensure that there are no errors in /etc/conf.d/grub\n" "and /etc/grub.d/* files or please file a bug report with\n" "%s file attached." msgstr "" "Syntaxfel upptäcktes i den genererade GRUB-konfigurationsfilen.\n" -"Kontrollera att det inte finns några fel i /etc/default/grub-\n" +"Kontrollera att det inte finns några fel i /etc/conf.d/grub-\n" "och /etc/grub.d/*-filerna eller skicka in en felrapport med\n" "bifogad %s-fil." diff -Naur grub-2.02~rc2/po/tr.po grub-2.02~rc2-magellan/po/tr.po --- grub-2.02~rc2/po/tr.po 2017-03-15 09:41:36.000000000 +0100 +++ grub-2.02~rc2-magellan/po/tr.po 2017-04-04 11:05:27.870140304 +0200 @@ -6438,7 +6438,7 @@ #: util/grub-mkconfig.in:271 msgid "" "Syntax errors are detected in generated GRUB config file.\n" -"Ensure that there are no errors in /etc/default/grub\n" +"Ensure that there are no errors in /etc/conf.d/grub\n" "and /etc/grub.d/* files or please file a bug report with\n" "%s file attached." msgstr "" diff -Naur grub-2.02~rc2/po/uk.gmo grub-2.02~rc2-magellan/po/uk.gmo --- grub-2.02~rc2/po/uk.gmo 2017-03-15 09:41:39.000000000 +0100 +++ grub-2.02~rc2-magellan/po/uk.gmo 2017-04-04 11:05:27.624142955 +0200 @@ -147,7 +147,7 @@ Specify filename.Specify hash to use.Specify one or more font files to load.Specify size for each read operationSpecify the number of input files.Speed: %s Start GDB stub on given portStop GDB stubStorage information for `%s' does not include typeStorage information for `%s' indicates neither a plain partition nor a plain diskStore matched component NUMBER in VARNAME.SuccessSundaySuppress normal output (warnings remain).Switch to native disk drivers. If no modules are specified default set (pata,ahci,usbms,ohci,uhci,ehci) is usedSyntax error at line %u Syntax errors are detected in generated GRUB config file. -Ensure that there are no errors in /etc/default/grub +Ensure that there are no errors in /etc/conf.d/grub and /etc/grub.d/* files or please file a bug report with %s file attached.System management bus controller I/O space is at 0x%x TTARGETTHEMESTarget format not specified (use the -O option).Terminal has specified geometry.Terminal is ASCII-only [default].Terminal is logical-ordered UTF-8.Terminal is visually-ordered UTF-8.Test USB support.Test bit at BYTE:BIT in CMOS.Test file read speed.Test if REGEXP matches STRING.Test video subsystem in mode WxH.Test video subsystem.Text-only The files are identical. @@ -301,7 +301,7 @@ Вказати назву файла.Вказати хеш для використання.Вказати один або декілька файлів для завантаження.Вкажіть розмір для кожної з дій щодо читанняВказати кількість файлів вхідних даних.Швидкість: %s Запустити заглушку GDB на вказаному портіЗупинити роботу заглушки GDBДані щодо сховища «%s» не містять типуДані щодо сховища «%s» не визначають ні даних щодо звичайного розділу, ні даних щодо звичайного дискаЗберегти компонент з номером НОМЕР до змінної НАЗВА_ЗМІННОЇ.УспіхнеділяПридушити звичайні повідомлення (показувати лише попередження).Перемкнутися на природні драйвери дисків. Якщо модулів не вказано, використовується типова послідовність (pata,ahci,usbms,ohci,uhci,ehci).Синтаксична помилку у рядку %u Виявлено синтаксичні помилки у файлі налаштувань GRUB. -Переконайтеся, що у файлах /etc/default/grub і /etc/grub.d/* +Переконайтеся, що у файлах /etc/conf.d/grub і /etc/grub.d/* немає помилок, будь ласка, створіть звіт щодо вади з долученням файла %s.Простір введення-виведення контролера каналу керування системою починається з 0x%x ТПРИЗНАЧЕННЯТЕМИФормат призначення не вказано (скористайтеся параметром -O).Термінал має відповідні геометричні параметри.У терміналі можна використовувати лише ASCII [типове значення].Термінал з логічним впорядкуванням UTF-8.Термінал з візуальним впорядкуванням UTF-8.Перевірка підтримки USB.Тестувати біт за адресою БАЙТ:БІТ у CMOS.Тестувати швидкість читання файла.Перевірити відповідність ФОРМАЛЬНОГО ВИРАЗУ РЯДКУ.Перевірити відеопідсистему у режимі ВxШ.Перевірити відеопідсистему.Лише текст Вміст файлів є тотожним. diff -Naur grub-2.02~rc2/po/uk.po grub-2.02~rc2-magellan/po/uk.po --- grub-2.02~rc2/po/uk.po 2017-03-15 09:41:37.000000000 +0100 +++ grub-2.02~rc2-magellan/po/uk.po 2017-04-04 11:05:27.674142416 +0200 @@ -6649,12 +6649,12 @@ #: util/grub-mkconfig.in:271 msgid "" "Syntax errors are detected in generated GRUB config file.\n" -"Ensure that there are no errors in /etc/default/grub\n" +"Ensure that there are no errors in /etc/conf.d/grub\n" "and /etc/grub.d/* files or please file a bug report with\n" "%s file attached." msgstr "" "Виявлено синтаксичні помилки у файлі налаштувань GRUB.\n" -"Переконайтеся, що у файлах /etc/default/grub і /etc/grub.d/*\n" +"Переконайтеся, що у файлах /etc/conf.d/grub і /etc/grub.d/*\n" "немає помилок, будь ласка, створіть звіт щодо вади з\n" "долученням файла %s." diff -Naur grub-2.02~rc2/po/vi.gmo grub-2.02~rc2-magellan/po/vi.gmo --- grub-2.02~rc2/po/vi.gmo 2017-03-15 09:41:40.000000000 +0100 +++ grub-2.02~rc2-magellan/po/vi.gmo 2017-04-04 11:05:27.683142319 +0200 @@ -149,7 +149,7 @@ Specify filename.Specify hash to use.Specify one or more font files to load.Specify size for each read operationSpecify the number of input files.Speed: %s Start GDB stub on given portStop GDB stubStorage information for `%s' does not include typeStorage information for `%s' indicates neither a plain partition nor a plain diskStore matched component NUMBER in VARNAME.SuccessSundaySuppress normal output (warnings remain).Switch to native disk drivers. If no modules are specified default set (pata,ahci,usbms,ohci,uhci,ehci) is usedSyntax error at line %u Syntax errors are detected in generated GRUB config file. -Ensure that there are no errors in /etc/default/grub +Ensure that there are no errors in /etc/conf.d/grub and /etc/grub.d/* files or please file a bug report with %s file attached.System management bus controller I/O space is at 0x%x TTARGETTHEMESTarget format not specified (use the -O option).Terminal has specified geometry.Terminal is ASCII-only [default].Terminal is logical-ordered UTF-8.Terminal is visually-ordered UTF-8.Test USB support.Test bit at BYTE:BIT in CMOS.Test file read speed.Test if REGEXP matches STRING.Test video subsystem in mode WxH.Test video subsystem.Text-only The files are identical. @@ -309,7 +309,7 @@ Ghi rõ tên tập tin.định rõ kiểu băm cần dùngChỉ định một hay nhiều phông chữ cần tải.Chỉ ra kích thước cho từ thao tác đọcGhi rõ số lượng tập tin đầu vào.Tốc độ: %s Khởi chạy “GDB stub” trên cổng đã choDừng “GDB stub”Thông tin kho chứa cho “%s” không chứa kiểuThông tin cho kho chứa “%s” không chỉ ra rằng phân vùng không phải thường mà đĩa cũng không phải thườngLưu các thành phần so khớp SỐ trong TÊN_BIẾN.Thành côngChủ nhậtLoại bỏ kết xuất thông thường (để lại các thông tin cảnh báo).Chuyển sang các ổ đĩa thật. Nếu không chỉ ra MÔ_ĐUN nào thì tập hợp mặc định (pata,ahci,usbms,ohci,uhci,ehci) được dùngLỗi cú pháp trên dòng %u. Các lỗi cú pháp đã được phát hiện trong tập tin cấu hình GRUB đã tạo. -Hãy chắc chắn rằng không có lỗi nào trong tập tin /etc/default/grub +Hãy chắc chắn rằng không có lỗi nào trong tập tin /etc/conf.d/grub và /etc/grub.d/* hoặc báo cáo tập tin lỗi này bằng cách đính kèm tập tin %s.Bộ điều khiển truy xuất bus hệ thống thấy cổng V/R là tại 0x%x TĐÍCHCHỦ ĐỀĐịnh dạng đích chưa được chỉ ra (sử dụng tùy chọn -O).Thiết bị cuối có hình thái được chỉ ra.Thiết bị cuối ở dạng chỉ-ASCII [mặc định].Thiết bị cuối là kiểu UTF-8 thứ-tự-lôgícThiết bị cuối là kiểu UTF-8 thứ-tự-ảoThử khả năng hỗ trợ USB.Thử bít tại BYTE:BIT trong CMOS.Kiểm tra tốc độ đọc tập tin.Kiểm tra xem BTCQ có khớp với CHUỖI.Thử hệ thống video phụ ở chế độ WxH.Thử hệ thống phụ ảnh động.Chỉ-chứa-chữ Các tập tin là đồng nhất. diff -Naur grub-2.02~rc2/po/vi.po grub-2.02~rc2-magellan/po/vi.po --- grub-2.02~rc2/po/vi.po 2017-03-15 09:41:37.000000000 +0100 +++ grub-2.02~rc2-magellan/po/vi.po 2017-04-04 11:05:27.775141328 +0200 @@ -6596,12 +6596,12 @@ #: util/grub-mkconfig.in:271 msgid "" "Syntax errors are detected in generated GRUB config file.\n" -"Ensure that there are no errors in /etc/default/grub\n" +"Ensure that there are no errors in /etc/conf.d/grub\n" "and /etc/grub.d/* files or please file a bug report with\n" "%s file attached." msgstr "" "Các lỗi cú pháp đã được phát hiện trong tập tin cấu hình GRUB đã tạo.\n" -"Hãy chắc chắn rằng không có lỗi nào trong tập tin /etc/default/grub\n" +"Hãy chắc chắn rằng không có lỗi nào trong tập tin /etc/conf.d/grub\n" "và /etc/grub.d/* hoặc báo cáo tập tin lỗi này bằng cách đính\n" "kèm tập tin %s." diff -Naur grub-2.02~rc2/po/zh_CN.po grub-2.02~rc2-magellan/po/zh_CN.po --- grub-2.02~rc2/po/zh_CN.po 2017-03-15 09:41:37.000000000 +0100 +++ grub-2.02~rc2-magellan/po/zh_CN.po 2017-04-04 11:05:27.757141522 +0200 @@ -6587,7 +6587,7 @@ #: util/grub-mkconfig.in:271 msgid "" "Syntax errors are detected in generated GRUB config file.\n" -"Ensure that there are no errors in /etc/default/grub\n" +"Ensure that there are no errors in /etc/conf.d/grub\n" "and /etc/grub.d/* files or please file a bug report with\n" "%s file attached." msgstr "" diff -Naur grub-2.02~rc2/po/zh_TW.po grub-2.02~rc2-magellan/po/zh_TW.po --- grub-2.02~rc2/po/zh_TW.po 2017-03-15 09:41:37.000000000 +0100 +++ grub-2.02~rc2-magellan/po/zh_TW.po 2017-04-04 11:05:27.809140961 +0200 @@ -6563,7 +6563,7 @@ #: util/grub-mkconfig.in:271 msgid "" "Syntax errors are detected in generated GRUB config file.\n" -"Ensure that there are no errors in /etc/default/grub\n" +"Ensure that there are no errors in /etc/conf.d/grub\n" "and /etc/grub.d/* files or please file a bug report with\n" "%s file attached." msgstr "" diff -Naur grub-2.02~rc2/util/grub.d/README grub-2.02~rc2-magellan/util/grub.d/README --- grub-2.02~rc2/util/grub.d/README 2017-02-11 23:25:13.000000000 +0100 +++ grub-2.02~rc2-magellan/util/grub.d/README 2017-04-04 11:05:27.912139852 +0200 @@ -8,4 +8,4 @@ The number namespace in-between is configurable by system installer and/or administrator. For example, you can add an entry to boot another OS as 01_otheros, 11_otheros, etc, depending on the position you want it to occupy in -the menu; and then adjust the default setting via /etc/default/grub. +the menu; and then adjust the default setting via /etc/conf.d/grub. diff -Naur grub-2.02~rc2/util/grub-mkconfig.in grub-2.02~rc2-magellan/util/grub-mkconfig.in --- grub-2.02~rc2/util/grub-mkconfig.in 2017-02-11 23:25:13.000000000 +0100 +++ grub-2.02~rc2-magellan/util/grub-mkconfig.in 2017-04-04 11:05:27.912139852 +0200 @@ -269,7 +269,7 @@ if ! ${grub_script_check} ${grub_cfg}.new; then # TRANSLATORS: %s is replaced by filename gettext_printf "Syntax errors are detected in generated GRUB config file. -Ensure that there are no errors in /etc/default/grub +Ensure that there are no errors in /etc/conf.d/grub and /etc/grub.d/* files or please file a bug report with %s file attached." "${grub_cfg}.new" >&2 echo >&2