kernel-alx/patches-4.9/0275-4.9.176-all-fixes.patch

diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu
index 069e8d52c991..cadb7a9a5218 100644
--- a/Documentation/ABI/testing/sysfs-devices-system-cpu
+++ b/Documentation/ABI/testing/sysfs-devices-system-cpu
@@ -357,6 +357,7 @@ What:		/sys/devices/system/cpu/vulnerabilities
 		/sys/devices/system/cpu/vulnerabilities/spectre_v2
 		/sys/devices/system/cpu/vulnerabilities/spec_store_bypass
 		/sys/devices/system/cpu/vulnerabilities/l1tf
+		/sys/devices/system/cpu/vulnerabilities/mds
 Date:		January 2018
 Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
 Description:	Information about CPU vulnerabilities
@@ -369,8 +370,7 @@ Description:	Information about CPU vulnerabilities
 		"Vulnerable"	  CPU is affected and no mitigation in effect
 		"Mitigation: $M"  CPU is affected and mitigation $M is in effect
 
-		Details about the l1tf file can be found in
-		Documentation/admin-guide/l1tf.rst
+		See also: Documentation/hw-vuln/index.rst
 
 What:		/sys/devices/system/cpu/smt
 		/sys/devices/system/cpu/smt/active
diff --git a/Documentation/hw-vuln/index.rst b/Documentation/hw-vuln/index.rst
new file mode 100644
index 000000000000..ffc064c1ec68
--- /dev/null
+++ b/Documentation/hw-vuln/index.rst
@@ -0,0 +1,13 @@
+========================
+Hardware vulnerabilities
+========================
+
+This section describes CPU vulnerabilities and provides an overview of the
+possible mitigations along with guidance for selecting mitigations if they
+are configurable at compile, boot or run time.
+
+.. toctree::
+   :maxdepth: 1
+
+   l1tf
+   mds
diff --git a/Documentation/hw-vuln/l1tf.rst b/Documentation/hw-vuln/l1tf.rst
new file mode 100644
index 000000000000..31653a9f0e1b
--- /dev/null
+++ b/Documentation/hw-vuln/l1tf.rst
@@ -0,0 +1,615 @@
+L1TF - L1 Terminal Fault
+========================
+
+L1 Terminal Fault is a hardware vulnerability which allows unprivileged
+speculative access to data which is available in the Level 1 Data Cache
+when the page table entry controlling the virtual address, which is used
+for the access, has the Present bit cleared or other reserved bits set.
+
+Affected processors
+-------------------
+
+This vulnerability affects a wide range of Intel processors. The
+vulnerability is not present on:
+
+   - Processors from AMD, Centaur and other non Intel vendors
+
+   - Older processor models, where the CPU family is < 6
+
+   - A range of Intel ATOM processors (Cedarview, Cloverview, Lincroft,
+     Penwell, Pineview, Silvermont, Airmont, Merrifield)
+
+   - The Intel XEON PHI family
+
+   - Intel processors which have the ARCH_CAP_RDCL_NO bit set in the
+     IA32_ARCH_CAPABILITIES MSR. If the bit is set the CPU is not affected
+     by the Meltdown vulnerability either. These CPUs should become
+     available by end of 2018.
+
+Whether a processor is affected or not can be read out from the L1TF
+vulnerability file in sysfs. See :ref:`l1tf_sys_info`.
+
+Related CVEs
+------------
+
+The following CVE entries are related to the L1TF vulnerability:
+
+   =============  =================  ==============================
+   CVE-2018-3615  L1 Terminal Fault  SGX related aspects
+   CVE-2018-3620  L1 Terminal Fault  OS, SMM related aspects
+   CVE-2018-3646  L1 Terminal Fault  Virtualization related aspects
+   =============  =================  ==============================
+
+Problem
+-------
+
+If an instruction accesses a virtual address for which the relevant page
+table entry (PTE) has the Present bit cleared or other reserved bits set,
+then speculative execution ignores the invalid PTE and loads the referenced
+data if it is present in the Level 1 Data Cache, as if the page referenced
+by the address bits in the PTE was still present and accessible.
+
+While this is a purely speculative mechanism and the instruction will raise
+a page fault when it is retired eventually, the pure act of loading the
+data and making it available to other speculative instructions opens up the
+opportunity for side channel attacks to unprivileged malicious code,
+similar to the Meltdown attack.
+
+While Meltdown breaks the user space to kernel space protection, L1TF
+allows to attack any physical memory address in the system and the attack
+works across all protection domains. It allows an attack of SGX and also
+works from inside virtual machines because the speculation bypasses the
+extended page table (EPT) protection mechanism.
+
+
+Attack scenarios
+----------------
+
+1. Malicious user space
+^^^^^^^^^^^^^^^^^^^^^^^
+
+   Operating Systems store arbitrary information in the address bits of a
+   PTE which is marked non present. This allows a malicious user space
+   application to attack the physical memory to which these PTEs resolve.
+   In some cases user-space can maliciously influence the information
+   encoded in the address bits of the PTE, thus making attacks more
+   deterministic and more practical.
+
+   The Linux kernel contains a mitigation for this attack vector, PTE
+   inversion, which is permanently enabled and has no performance
+   impact. The kernel ensures that the address bits of PTEs, which are not
+   marked present, never point to cacheable physical memory space.
+
+   A system with an up to date kernel is protected against attacks from
+   malicious user space applications.
+
+2. Malicious guest in a virtual machine
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+   The fact that L1TF breaks all domain protections allows malicious guest
+   OSes, which can control the PTEs directly, and malicious guest user
+   space applications, which run on an unprotected guest kernel lacking the
+   PTE inversion mitigation for L1TF, to attack physical host memory.
+
+   A special aspect of L1TF in the context of virtualization is symmetric
+   multi threading (SMT). The Intel implementation of SMT is called
+   HyperThreading. The fact that Hyperthreads on the affected processors
+   share the L1 Data Cache (L1D) is important for this. As the flaw allows
+   only to attack data which is present in L1D, a malicious guest running
+   on one Hyperthread can attack the data which is brought into the L1D by
+   the context which runs on the sibling Hyperthread of the same physical
+   core. This context can be host OS, host user space or a different guest.
+
+   If the processor does not support Extended Page Tables, the attack is
+   only possible, when the hypervisor does not sanitize the content of the
+   effective (shadow) page tables.
+
+   While solutions exist to mitigate these attack vectors fully, these
+   mitigations are not enabled by default in the Linux kernel because they
+   can affect performance significantly. The kernel provides several
+   mechanisms which can be utilized to address the problem depending on the
+   deployment scenario. The mitigations, their protection scope and impact
+   are described in the next sections.
+
+   The default mitigations and the rationale for choosing them are explained
+   at the end of this document. See :ref:`default_mitigations`.
+
+.. _l1tf_sys_info:
+
+L1TF system information
+-----------------------
+
+The Linux kernel provides a sysfs interface to enumerate the current L1TF
+status of the system: whether the system is vulnerable, and which
+mitigations are active. The relevant sysfs file is:
+
+/sys/devices/system/cpu/vulnerabilities/l1tf
+
+The possible values in this file are:
+
+  ===========================   ===============================
+  'Not affected'		The processor is not vulnerable
+  'Mitigation: PTE Inversion'	The host protection is active
+  ===========================   ===============================
+
+If KVM/VMX is enabled and the processor is vulnerable then the following
+information is appended to the 'Mitigation: PTE Inversion' part:
+
+  - SMT status:
+
+    =====================  ================
+    'VMX: SMT vulnerable'  SMT is enabled
+    'VMX: SMT disabled'    SMT is disabled
+    =====================  ================
+
+  - L1D Flush mode:
+
+    ================================  ====================================
+    'L1D vulnerable'		      L1D flushing is disabled
+
+    'L1D conditional cache flushes'   L1D flush is conditionally enabled
+
+    'L1D cache flushes'		      L1D flush is unconditionally enabled
+    ================================  ====================================
+
+The resulting grade of protection is discussed in the following sections.
+
+
+Host mitigation mechanism
+-------------------------
+
+The kernel is unconditionally protected against L1TF attacks from malicious
+user space running on the host.
+
+
+Guest mitigation mechanisms
+---------------------------
+
+.. _l1d_flush:
+
+1. L1D flush on VMENTER
+^^^^^^^^^^^^^^^^^^^^^^^
+
+   To make sure that a guest cannot attack data which is present in the L1D
+   the hypervisor flushes the L1D before entering the guest.
+
+   Flushing the L1D evicts not only the data which should not be accessed
+   by a potentially malicious guest, it also flushes the guest
+   data. Flushing the L1D has a performance impact as the processor has to
+   bring the flushed guest data back into the L1D. Depending on the
+   frequency of VMEXIT/VMENTER and the type of computations in the guest
+   performance degradation in the range of 1% to 50% has been observed. For
+   scenarios where guest VMEXIT/VMENTER are rare the performance impact is
+   minimal. Virtio and mechanisms like posted interrupts are designed to
+   confine the VMEXITs to a bare minimum, but specific configurations and
+   application scenarios might still suffer from a high VMEXIT rate.
+
+   The kernel provides two L1D flush modes:
+    - conditional ('cond')
+    - unconditional ('always')
+
+   The conditional mode avoids L1D flushing after VMEXITs which execute
+   only audited code paths before the corresponding VMENTER. These code
+   paths have been verified that they cannot expose secrets or other
+   interesting data to an attacker, but they can leak information about the
+   address space layout of the hypervisor.
+
+   Unconditional mode flushes L1D on all VMENTER invocations and provides
+   maximum protection. It has a higher overhead than the conditional
+   mode. The overhead cannot be quantified correctly as it depends on the
+   workload scenario and the resulting number of VMEXITs.
+
+   The general recommendation is to enable L1D flush on VMENTER. The kernel
+   defaults to conditional mode on affected processors.
+
+   **Note**, that L1D flush does not prevent the SMT problem because the
+   sibling thread will also bring back its data into the L1D which makes it
+   attackable again.
+
+   L1D flush can be controlled by the administrator via the kernel command
+   line and sysfs control files. See :ref:`mitigation_control_command_line`
+   and :ref:`mitigation_control_kvm`.
+
+.. _guest_confinement:
+
+2. Guest VCPU confinement to dedicated physical cores
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+   To address the SMT problem, it is possible to make a guest or a group of
+   guests affine to one or more physical cores. The proper mechanism for
+   that is to utilize exclusive cpusets to ensure that no other guest or
+   host tasks can run on these cores.
+
+   If only a single guest or related guests run on sibling SMT threads on
+   the same physical core then they can only attack their own memory and
+   restricted parts of the host memory.
+
+   Host memory is attackable, when one of the sibling SMT threads runs in
+   host OS (hypervisor) context and the other in guest context. The amount
+   of valuable information from the host OS context depends on the context
+   which the host OS executes, i.e. interrupts, soft interrupts and kernel
+   threads. The amount of valuable data from these contexts cannot be
+   declared as non-interesting for an attacker without deep inspection of
+   the code.
+
+   **Note**, that assigning guests to a fixed set of physical cores affects
+   the ability of the scheduler to do load balancing and might have
+   negative effects on CPU utilization depending on the hosting
+   scenario. Disabling SMT might be a viable alternative for particular
+   scenarios.
+
+   For further information about confining guests to a single or to a group
+   of cores consult the cpusets documentation:
+
+   https://www.kernel.org/doc/Documentation/cgroup-v1/cpusets.txt
+
+.. _interrupt_isolation:
+
+3. Interrupt affinity
+^^^^^^^^^^^^^^^^^^^^^
+
+   Interrupts can be made affine to logical CPUs. This is not universally
+   true because there are types of interrupts which are truly per CPU
+   interrupts, e.g. the local timer interrupt. Aside of that multi queue
+   devices affine their interrupts to single CPUs or groups of CPUs per
+   queue without allowing the administrator to control the affinities.
+
+   Moving the interrupts, which can be affinity controlled, away from CPUs
+   which run untrusted guests, reduces the attack vector space.
+
+   Whether the interrupts with are affine to CPUs, which run untrusted
+   guests, provide interesting data for an attacker depends on the system
+   configuration and the scenarios which run on the system. While for some
+   of the interrupts it can be assumed that they won't expose interesting
+   information beyond exposing hints about the host OS memory layout, there
+   is no way to make general assumptions.
+
+   Interrupt affinity can be controlled by the administrator via the
+   /proc/irq/$NR/smp_affinity[_list] files. Limited documentation is
+   available at:
+
+   https://www.kernel.org/doc/Documentation/IRQ-affinity.txt
+
+.. _smt_control:
+
+4. SMT control
+^^^^^^^^^^^^^^
+
+   To prevent the SMT issues of L1TF it might be necessary to disable SMT
+   completely. Disabling SMT can have a significant performance impact, but
+   the impact depends on the hosting scenario and the type of workloads.
+   The impact of disabling SMT needs also to be weighted against the impact
+   of other mitigation solutions like confining guests to dedicated cores.
+
+   The kernel provides a sysfs interface to retrieve the status of SMT and
+   to control it. It also provides a kernel command line interface to
+   control SMT.
+
+   The kernel command line interface consists of the following options:
+
+     =========== ==========================================================
+     nosmt	 Affects the bring up of the secondary CPUs during boot. The
+		 kernel tries to bring all present CPUs online during the
+		 boot process. "nosmt" makes sure that from each physical
+		 core only one - the so called primary (hyper) thread is
+		 activated. Due to a design flaw of Intel processors related
+		 to Machine Check Exceptions the non primary siblings have
+		 to be brought up at least partially and are then shut down
+		 again.  "nosmt" can be undone via the sysfs interface.
+
+     nosmt=force Has the same effect as "nosmt" but it does not allow to
+		 undo the SMT disable via the sysfs interface.
+     =========== ==========================================================
+
+   The sysfs interface provides two files:
+
+   - /sys/devices/system/cpu/smt/control
+   - /sys/devices/system/cpu/smt/active
+
+   /sys/devices/system/cpu/smt/control:
+
+     This file allows to read out the SMT control state and provides the
+     ability to disable or (re)enable SMT. The possible states are:
+
+	==============  ===================================================
+	on		SMT is supported by the CPU and enabled. All
+			logical CPUs can be onlined and offlined without
+			restrictions.
+
+	off		SMT is supported by the CPU and disabled. Only
+			the so called primary SMT threads can be onlined
+			and offlined without restrictions. An attempt to
+			online a non-primary sibling is rejected
+
+	forceoff	Same as 'off' but the state cannot be controlled.
+			Attempts to write to the control file are rejected.
+
+	notsupported	The processor does not support SMT. It's therefore
+			not affected by the SMT implications of L1TF.
+			Attempts to write to the control file are rejected.
+	==============  ===================================================
+
+     The possible states which can be written into this file to control SMT
+     state are:
+
+     - on
+     - off
+     - forceoff
+
+   /sys/devices/system/cpu/smt/active:
+
+     This file reports whether SMT is enabled and active, i.e. if on any
+     physical core two or more sibling threads are online.
+
+   SMT control is also possible at boot time via the l1tf kernel command
+   line parameter in combination with L1D flush control. See
+   :ref:`mitigation_control_command_line`.
+
+5. Disabling EPT
+^^^^^^^^^^^^^^^^
+
+  Disabling EPT for virtual machines provides full mitigation for L1TF even
+  with SMT enabled, because the effective page tables for guests are
+  managed and sanitized by the hypervisor. Though disabling EPT has a
+  significant performance impact especially when the Meltdown mitigation
+  KPTI is enabled.
+
+  EPT can be disabled in the hypervisor via the 'kvm-intel.ept' parameter.
+
+There is ongoing research and development for new mitigation mechanisms to
+address the performance impact of disabling SMT or EPT.
+
+.. _mitigation_control_command_line:
+
+Mitigation control on the kernel command line
+---------------------------------------------
+
+The kernel command line allows to control the L1TF mitigations at boot
+time with the option "l1tf=". The valid arguments for this option are:
+
+  ============  =============================================================
+  full		Provides all available mitigations for the L1TF
+		vulnerability. Disables SMT and enables all mitigations in
+		the hypervisors, i.e. unconditional L1D flushing
+
+		SMT control and L1D flush control via the sysfs interface
+		is still possible after boot.  Hypervisors will issue a
+		warning when the first VM is started in a potentially
+		insecure configuration, i.e. SMT enabled or L1D flush
+		disabled.
+
+  full,force	Same as 'full', but disables SMT and L1D flush runtime
+		control. Implies the 'nosmt=force' command line option.
+		(i.e. sysfs control of SMT is disabled.)
+
+  flush		Leaves SMT enabled and enables the default hypervisor
+		mitigation, i.e. conditional L1D flushing
+
+		SMT control and L1D flush control via the sysfs interface
+		is still possible after boot.  Hypervisors will issue a
+		warning when the first VM is started in a potentially
+		insecure configuration, i.e. SMT enabled or L1D flush
+		disabled.
+
+  flush,nosmt	Disables SMT and enables the default hypervisor mitigation,
+		i.e. conditional L1D flushing.
+
+		SMT control and L1D flush control via the sysfs interface
+		is still possible after boot.  Hypervisors will issue a
+		warning when the first VM is started in a potentially
+		insecure configuration, i.e. SMT enabled or L1D flush
+		disabled.
+
+  flush,nowarn	Same as 'flush', but hypervisors will not warn when a VM is
+		started in a potentially insecure configuration.
+
+  off		Disables hypervisor mitigations and doesn't emit any
+		warnings.
+		It also drops the swap size and available RAM limit restrictions
+		on both hypervisor and bare metal.
+
+  ============  =============================================================
+
+The default is 'flush'. For details about L1D flushing see :ref:`l1d_flush`.
+
+
+.. _mitigation_control_kvm:
+
+Mitigation control for KVM - module parameter
+-------------------------------------------------------------
+
+The KVM hypervisor mitigation mechanism, flushing the L1D cache when
+entering a guest, can be controlled with a module parameter.
+
+The option/parameter is "kvm-intel.vmentry_l1d_flush=". It takes the
+following arguments:
+
+  ============  ==============================================================
+  always	L1D cache flush on every VMENTER.
+
+  cond		Flush L1D on VMENTER only when the code between VMEXIT and
+		VMENTER can leak host memory which is considered
+		interesting for an attacker. This still can leak host memory
+		which allows e.g. to determine the hosts address space layout.
+
+  never		Disables the mitigation
+  ============  ==============================================================
+
+The parameter can be provided on the kernel command line, as a module
+parameter when loading the modules and at runtime modified via the sysfs
+file:
+
+/sys/module/kvm_intel/parameters/vmentry_l1d_flush
+
+The default is 'cond'. If 'l1tf=full,force' is given on the kernel command
+line, then 'always' is enforced and the kvm-intel.vmentry_l1d_flush
+module parameter is ignored and writes to the sysfs file are rejected.
+
+.. _mitigation_selection:
+
+Mitigation selection guide
+--------------------------
+
+1. No virtualization in use
+^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+   The system is protected by the kernel unconditionally and no further
+   action is required.
+
+2. Virtualization with trusted guests
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+   If the guest comes from a trusted source and the guest OS kernel is
+   guaranteed to have the L1TF mitigations in place the system is fully
+   protected against L1TF and no further action is required.
+
+   To avoid the overhead of the default L1D flushing on VMENTER the
+   administrator can disable the flushing via the kernel command line and
+   sysfs control files. See :ref:`mitigation_control_command_line` and
+   :ref:`mitigation_control_kvm`.
+
+
+3. Virtualization with untrusted guests
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+3.1. SMT not supported or disabled
+""""""""""""""""""""""""""""""""""
+
+  If SMT is not supported by the processor or disabled in the BIOS or by
+  the kernel, it's only required to enforce L1D flushing on VMENTER.
+
+  Conditional L1D flushing is the default behaviour and can be tuned. See
+  :ref:`mitigation_control_command_line` and :ref:`mitigation_control_kvm`.
+
+3.2. EPT not supported or disabled
+""""""""""""""""""""""""""""""""""
+
+  If EPT is not supported by the processor or disabled in the hypervisor,
+  the system is fully protected. SMT can stay enabled and L1D flushing on
+  VMENTER is not required.
+
+  EPT can be disabled in the hypervisor via the 'kvm-intel.ept' parameter.
+
+3.3. SMT and EPT supported and active
+"""""""""""""""""""""""""""""""""""""
+
+  If SMT and EPT are supported and active then various degrees of
+  mitigations can be employed:
+
+  - L1D flushing on VMENTER:
+
+    L1D flushing on VMENTER is the minimal protection requirement, but it
+    is only potent in combination with other mitigation methods.
+
+    Conditional L1D flushing is the default behaviour and can be tuned. See
+    :ref:`mitigation_control_command_line` and :ref:`mitigation_control_kvm`.
+
+  - Guest confinement:
+
+    Confinement of guests to a single or a group of physical cores which
+    are not running any other processes, can reduce the attack surface
+    significantly, but interrupts, soft interrupts and kernel threads can
+    still expose valuable data to a potential attacker. See
+    :ref:`guest_confinement`.
+
+  - Interrupt isolation:
+
+    Isolating the guest CPUs from interrupts can reduce the attack surface
+    further, but still allows a malicious guest to explore a limited amount
+    of host physical memory. This can at least be used to gain knowledge
+    about the host address space layout. The interrupts which have a fixed
+    affinity to the CPUs which run the untrusted guests can depending on
+    the scenario still trigger soft interrupts and schedule kernel threads
+    which might expose valuable information. See
+    :ref:`interrupt_isolation`.
+
+The above three mitigation methods combined can provide protection to a
+certain degree, but the risk of the remaining attack surface has to be
+carefully analyzed. For full protection the following methods are
+available:
+
+  - Disabling SMT:
+
+    Disabling SMT and enforcing the L1D flushing provides the maximum
+    amount of protection. This mitigation is not depending on any of the
+    above mitigation methods.
+
+    SMT control and L1D flushing can be tuned by the command line
+    parameters 'nosmt', 'l1tf', 'kvm-intel.vmentry_l1d_flush' and at run
+    time with the matching sysfs control files. See :ref:`smt_control`,
+    :ref:`mitigation_control_command_line` and
+    :ref:`mitigation_control_kvm`.
+
+  - Disabling EPT:
+
+    Disabling EPT provides the maximum amount of protection as well. It is
+    not depending on any of the above mitigation methods. SMT can stay
+    enabled and L1D flushing is not required, but the performance impact is
+    significant.
+
+    EPT can be disabled in the hypervisor via the 'kvm-intel.ept'
+    parameter.
+
+3.4. Nested virtual machines
+""""""""""""""""""""""""""""
+
+When nested virtualization is in use, three operating systems are involved:
+the bare metal hypervisor, the nested hypervisor and the nested virtual
+machine.  VMENTER operations from the nested hypervisor into the nested
+guest will always be processed by the bare metal hypervisor. If KVM is the
+bare metal hypervisor it will:
+
+ - Flush the L1D cache on every switch from the nested hypervisor to the
+   nested virtual machine, so that the nested hypervisor's secrets are not
+   exposed to the nested virtual machine;
+
+ - Flush the L1D cache on every switch from the nested virtual machine to
+   the nested hypervisor; this is a complex operation, and flushing the L1D
+   cache avoids that the bare metal hypervisor's secrets are exposed to the
+   nested virtual machine;
+
+ - Instruct the nested hypervisor to not perform any L1D cache flush. This
+   is an optimization to avoid double L1D flushing.
+
+
+.. _default_mitigations:
+
+Default mitigations
+-------------------
+
+  The kernel default mitigations for vulnerable processors are:
+
+  - PTE inversion to protect against malicious user space. This is done
+    unconditionally and cannot be controlled. The swap storage is limited
+    to ~16TB.
+
+  - L1D conditional flushing on VMENTER when EPT is enabled for
+    a guest.
+
+  The kernel does not by default enforce the disabling of SMT, which leaves
+  SMT systems vulnerable when running untrusted guests with EPT enabled.
+
+  The rationale for this choice is:
+
+  - Force disabling SMT can break existing setups, especially with
+    unattended updates.
+
+  - If regular users run untrusted guests on their machine, then L1TF is
+    just an add on to other malware which might be embedded in an untrusted
+    guest, e.g. spam-bots or attacks on the local network.
+
+    There is no technical way to prevent a user from running untrusted code
+    on their machines blindly.
+
+  - It's technically extremely unlikely and from today's knowledge even
+    impossible that L1TF can be exploited via the most popular attack
+    mechanisms like JavaScript because these mechanisms have no way to
+    control PTEs. If this would be possible and not other mitigation would
+    be possible, then the default might be different.
+
+  - The administrators of cloud and hosting setups have to carefully
+    analyze the risk for their scenarios and make the appropriate
+    mitigation choices, which might even vary across their deployed
+    machines and also result in other changes of their overall setup.
+    There is no way for the kernel to provide a sensible default for this
+    kind of scenarios.
diff --git a/Documentation/hw-vuln/mds.rst b/Documentation/hw-vuln/mds.rst
new file mode 100644
index 000000000000..daf6fdac49a3
--- /dev/null
+++ b/Documentation/hw-vuln/mds.rst
@@ -0,0 +1,308 @@
+MDS - Microarchitectural Data Sampling
+======================================
+
+Microarchitectural Data Sampling is a hardware vulnerability which allows
+unprivileged speculative access to data which is available in various CPU
+internal buffers.
+
+Affected processors
+-------------------
+
+This vulnerability affects a wide range of Intel processors. The
+vulnerability is not present on:
+
+   - Processors from AMD, Centaur and other non Intel vendors
+
+   - Older processor models, where the CPU family is < 6
+
+   - Some Atoms (Bonnell, Saltwell, Goldmont, GoldmontPlus)
+
+   - Intel processors which have the ARCH_CAP_MDS_NO bit set in the
+     IA32_ARCH_CAPABILITIES MSR.
+
+Whether a processor is affected or not can be read out from the MDS
+vulnerability file in sysfs. See :ref:`mds_sys_info`.
+
+Not all processors are affected by all variants of MDS, but the mitigation
+is identical for all of them so the kernel treats them as a single
+vulnerability.
+
+Related CVEs
+------------
+
+The following CVE entries are related to the MDS vulnerability:
+
+   ==============  =====  ===================================================
+   CVE-2018-12126  MSBDS  Microarchitectural Store Buffer Data Sampling
+   CVE-2018-12130  MFBDS  Microarchitectural Fill Buffer Data Sampling
+   CVE-2018-12127  MLPDS  Microarchitectural Load Port Data Sampling
+   CVE-2019-11091  MDSUM  Microarchitectural Data Sampling Uncacheable Memory
+   ==============  =====  ===================================================
+
+Problem
+-------
+
+When performing store, load, L1 refill operations, processors write data
+into temporary microarchitectural structures (buffers). The data in the
+buffer can be forwarded to load operations as an optimization.
+
+Under certain conditions, usually a fault/assist caused by a load
+operation, data unrelated to the load memory address can be speculatively
+forwarded from the buffers. Because the load operation causes a fault or
+assist and its result will be discarded, the forwarded data will not cause
+incorrect program execution or state changes. But a malicious operation
+may be able to forward this speculative data to a disclosure gadget which
+allows in turn to infer the value via a cache side channel attack.
+
+Because the buffers are potentially shared between Hyper-Threads cross
+Hyper-Thread attacks are possible.
+
+Deeper technical information is available in the MDS specific x86
+architecture section: :ref:`Documentation/x86/mds.rst <mds>`.
+
+
+Attack scenarios
+----------------
+
+Attacks against the MDS vulnerabilities can be mounted from malicious non
+priviledged user space applications running on hosts or guest. Malicious
+guest OSes can obviously mount attacks as well.
+
+Contrary to other speculation based vulnerabilities the MDS vulnerability
+does not allow the attacker to control the memory target address. As a
+consequence the attacks are purely sampling based, but as demonstrated with
+the TLBleed attack samples can be postprocessed successfully.
+
+Web-Browsers
+^^^^^^^^^^^^
+
+  It's unclear whether attacks through Web-Browsers are possible at
+  all. The exploitation through Java-Script is considered very unlikely,
+  but other widely used web technologies like Webassembly could possibly be
+  abused.
+
+
+.. _mds_sys_info:
+
+MDS system information
+-----------------------
+
+The Linux kernel provides a sysfs interface to enumerate the current MDS
+status of the system: whether the system is vulnerable, and which
+mitigations are active. The relevant sysfs file is:
+
+/sys/devices/system/cpu/vulnerabilities/mds
+
+The possible values in this file are:
+
+  .. list-table::
+
+     * - 'Not affected'
+       - The processor is not vulnerable
+     * - 'Vulnerable'
+       - The processor is vulnerable, but no mitigation enabled
+     * - 'Vulnerable: Clear CPU buffers attempted, no microcode'
+       - The processor is vulnerable but microcode is not updated.
+
+         The mitigation is enabled on a best effort basis. See :ref:`vmwerv`
+     * - 'Mitigation: Clear CPU buffers'
+       - The processor is vulnerable and the CPU buffer clearing mitigation is
+         enabled.
+
+If the processor is vulnerable then the following information is appended
+to the above information:
+
+    ========================  ============================================
+    'SMT vulnerable'          SMT is enabled
+    'SMT mitigated'           SMT is enabled and mitigated
+    'SMT disabled'            SMT is disabled
+    'SMT Host state unknown'  Kernel runs in a VM, Host SMT state unknown
+    ========================  ============================================
+
+.. _vmwerv:
+
+Best effort mitigation mode
+^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+  If the processor is vulnerable, but the availability of the microcode based
+  mitigation mechanism is not advertised via CPUID the kernel selects a best
+  effort mitigation mode.  This mode invokes the mitigation instructions
+  without a guarantee that they clear the CPU buffers.
+
+  This is done to address virtualization scenarios where the host has the
+  microcode update applied, but the hypervisor is not yet updated to expose
+  the CPUID to the guest. If the host has updated microcode the protection
+  takes effect otherwise a few cpu cycles are wasted pointlessly.
+
+  The state in the mds sysfs file reflects this situation accordingly.
+
+
+Mitigation mechanism
+-------------------------
+
+The kernel detects the affected CPUs and the presence of the microcode
+which is required.
+
+If a CPU is affected and the microcode is available, then the kernel
+enables the mitigation by default. The mitigation can be controlled at boot
+time via a kernel command line option. See
+:ref:`mds_mitigation_control_command_line`.
+
+.. _cpu_buffer_clear:
+
+CPU buffer clearing
+^^^^^^^^^^^^^^^^^^^
+
+  The mitigation for MDS clears the affected CPU buffers on return to user
+  space and when entering a guest.
+
+  If SMT is enabled it also clears the buffers on idle entry when the CPU
+  is only affected by MSBDS and not any other MDS variant, because the
+  other variants cannot be protected against cross Hyper-Thread attacks.
+
+  For CPUs which are only affected by MSBDS the user space, guest and idle
+  transition mitigations are sufficient and SMT is not affected.
+
+.. _virt_mechanism:
+
+Virtualization mitigation
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+  The protection for host to guest transition depends on the L1TF
+  vulnerability of the CPU:
+
+  - CPU is affected by L1TF:
+
+    If the L1D flush mitigation is enabled and up to date microcode is
+    available, the L1D flush mitigation is automatically protecting the
+    guest transition.
+
+    If the L1D flush mitigation is disabled then the MDS mitigation is
+    invoked explicit when the host MDS mitigation is enabled.
+
+    For details on L1TF and virtualization see:
+    :ref:`Documentation/hw-vuln//l1tf.rst <mitigation_control_kvm>`.
+
+  - CPU is not affected by L1TF:
+
+    CPU buffers are flushed before entering the guest when the host MDS
+    mitigation is enabled.
+
+  The resulting MDS protection matrix for the host to guest transition:
+
+  ============ ===== ============= ============ =================
+   L1TF         MDS   VMX-L1FLUSH   Host MDS     MDS-State
+
+   Don't care   No    Don't care    N/A          Not affected
+
+   Yes          Yes   Disabled      Off          Vulnerable
+
+   Yes          Yes   Disabled      Full         Mitigated
+
+   Yes          Yes   Enabled       Don't care   Mitigated
+
+   No           Yes   N/A           Off          Vulnerable
+
+   No           Yes   N/A           Full         Mitigated
+  ============ ===== ============= ============ =================
+
+  This only covers the host to guest transition, i.e. prevents leakage from
+  host to guest, but does not protect the guest internally. Guests need to
+  have their own protections.
+
+.. _xeon_phi:
+
+XEON PHI specific considerations
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+  The XEON PHI processor family is affected by MSBDS which can be exploited
+  cross Hyper-Threads when entering idle states. Some XEON PHI variants allow
+  to use MWAIT in user space (Ring 3) which opens an potential attack vector
+  for malicious user space. The exposure can be disabled on the kernel
+  command line with the 'ring3mwait=disable' command line option.
+
+  XEON PHI is not affected by the other MDS variants and MSBDS is mitigated
+  before the CPU enters a idle state. As XEON PHI is not affected by L1TF
+  either disabling SMT is not required for full protection.
+
+.. _mds_smt_control:
+
+SMT control
+^^^^^^^^^^^
+
+  All MDS variants except MSBDS can be attacked cross Hyper-Threads. That
+  means on CPUs which are affected by MFBDS or MLPDS it is necessary to
+  disable SMT for full protection. These are most of the affected CPUs; the
+  exception is XEON PHI, see :ref:`xeon_phi`.
+
+  Disabling SMT can have a significant performance impact, but the impact
+  depends on the type of workloads.
+
+  See the relevant chapter in the L1TF mitigation documentation for details:
+  :ref:`Documentation/hw-vuln/l1tf.rst <smt_control>`.
+
+
+.. _mds_mitigation_control_command_line:
+
+Mitigation control on the kernel command line
+---------------------------------------------
+
+The kernel command line allows to control the MDS mitigations at boot
+time with the option "mds=". The valid arguments for this option are:
+
+  ============  =============================================================
+  full		If the CPU is vulnerable, enable all available mitigations
+		for the MDS vulnerability, CPU buffer clearing on exit to
+		userspace and when entering a VM. Idle transitions are
+		protected as well if SMT is enabled.
+
+		It does not automatically disable SMT.
+
+  full,nosmt	The same as mds=full, with SMT disabled on vulnerable
+		CPUs.  This is the complete mitigation.
+
+  off		Disables MDS mitigations completely.
+
+  ============  =============================================================
+
+Not specifying this option is equivalent to "mds=full".
+
+
+Mitigation selection guide
+--------------------------
+
+1. Trusted userspace
+^^^^^^^^^^^^^^^^^^^^
+
+   If all userspace applications are from a trusted source and do not
+   execute untrusted code which is supplied externally, then the mitigation
+   can be disabled.
+
+
+2. Virtualization with trusted guests
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+   The same considerations as above versus trusted user space apply.
+
+3. Virtualization with untrusted guests
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+   The protection depends on the state of the L1TF mitigations.
+   See :ref:`virt_mechanism`.
+
+   If the MDS mitigation is enabled and SMT is disabled, guest to host and
+   guest to guest attacks are prevented.
+
+.. _mds_default_mitigations:
+
+Default mitigations
+-------------------
+
+  The kernel default mitigations for vulnerable processors are:
+
+  - Enable CPU buffer clearing
+
+  The kernel does not by default enforce the disabling of SMT, which leaves
+  SMT systems vulnerable when running untrusted code. The same rationale as
+  for L1TF applies.
+  See :ref:`Documentation/hw-vuln//l1tf.rst <default_mitigations>`.
diff --git a/Documentation/index.rst b/Documentation/index.rst
index 213399aac757..f95c58dbbbc3 100644
--- a/Documentation/index.rst
+++ b/Documentation/index.rst
@@ -12,7 +12,6 @@ Contents:
    :maxdepth: 2
 
    kernel-documentation
-   l1tf
    development-process/index
    dev-tools/tools
    driver-api/index
@@ -20,6 +19,24 @@ Contents:
    gpu/index
    80211/index
 
+This section describes CPU vulnerabilities and their mitigations.
+
+.. toctree::
+   :maxdepth: 1
+
+   hw-vuln/index
+
+Architecture-specific documentation
+-----------------------------------
+
+These books provide programming details about architecture-specific
+implementation.
+
+.. toctree::
+   :maxdepth: 2
+
+   x86/index
+
 Indices and tables
 ==================
 
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index a1472b48ee22..55a9bbbcf5e1 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -2076,10 +2076,13 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			off
 				Disables hypervisor mitigations and doesn't
 				emit any warnings.
+				It also drops the swap size and available
+				RAM limit restriction on both hypervisor and
+				bare metal.
 
 			Default is 'flush'.
 
-			For details see: Documentation/admin-guide/l1tf.rst
+			For details see: Documentation/hw-vuln/l1tf.rst
 
 	l2cr=		[PPC]
 
@@ -2322,6 +2325,32 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			Format: <first>,<last>
 			Specifies range of consoles to be captured by the MDA.
 
+	mds=		[X86,INTEL]
+			Control mitigation for the Micro-architectural Data
+			Sampling (MDS) vulnerability.
+
+			Certain CPUs are vulnerable to an exploit against CPU
+			internal buffers which can forward information to a
+			disclosure gadget under certain conditions.
+
+			In vulnerable processors, the speculatively
+			forwarded data can be used in a cache side channel
+			attack, to access data to which the attacker does
+			not have direct access.
+
+			This parameter controls the MDS mitigation. The
+			options are:
+
+			full       - Enable MDS mitigation on vulnerable CPUs
+			full,nosmt - Enable MDS mitigation and disable
+				     SMT on vulnerable CPUs
+			off        - Unconditionally disable MDS mitigation
+
+			Not specifying this option is equivalent to
+			mds=full.
+
+			For details see: Documentation/hw-vuln/mds.rst
+
 	mem=nn[KMG]	[KNL,BOOT] Force usage of a specific amount of memory
 			Amount of memory to be used when the kernel is not able
 			to see the whole system memory or for test.
@@ -2444,6 +2473,38 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			in the "bleeding edge" mini2440 support kernel at
 			http://repo.or.cz/w/linux-2.6/mini2440.git
 
+	mitigations=
+			[X86] Control optional mitigations for CPU
+			vulnerabilities.  This is a set of curated,
+			arch-independent options, each of which is an
+			aggregation of existing arch-specific options.
+
+			off
+				Disable all optional CPU mitigations.  This
+				improves system performance, but it may also
+				expose users to several CPU vulnerabilities.
+				Equivalent to: nopti [X86]
+					       nospectre_v2 [X86]
+					       spectre_v2_user=off [X86]
+					       spec_store_bypass_disable=off [X86]
+					       l1tf=off [X86]
+					       mds=off [X86]
+
+			auto (default)
+				Mitigate all CPU vulnerabilities, but leave SMT
+				enabled, even if it's vulnerable.  This is for
+				users who don't want to be surprised by SMT
+				getting disabled across kernel upgrades, or who
+				have other ways of avoiding SMT-based attacks.
+				Equivalent to: (default behavior)
+
+			auto,nosmt
+				Mitigate all CPU vulnerabilities, disabling SMT
+				if needed.  This is for users who always want to
+				be fully mitigated, even if it means losing SMT.
+				Equivalent to: l1tf=flush,nosmt [X86]
+					       mds=full,nosmt [X86]
+
 	mminit_loglevel=
 			[KNL] When CONFIG_DEBUG_MEMORY_INIT is set, this
 			parameter allows control of the logging verbosity for
@@ -4030,9 +4091,13 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 
 	spectre_v2=	[X86] Control mitigation of Spectre variant 2
 			(indirect branch speculation) vulnerability.
+			The default operation protects the kernel from
+			user space attacks.
 
-			on   - unconditionally enable
-			off  - unconditionally disable
+			on   - unconditionally enable, implies
+			       spectre_v2_user=on
+			off  - unconditionally disable, implies
+			       spectre_v2_user=off
 			auto - kernel detects whether your CPU model is
 			       vulnerable
 
@@ -4042,6 +4107,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			CONFIG_RETPOLINE configuration option, and the
 			compiler with which the kernel was built.
 
+			Selecting 'on' will also enable the mitigation
+			against user space to user space task attacks.
+
+			Selecting 'off' will disable both the kernel and
+			the user space protections.
+
 			Specific mitigations can also be selected manually:
 
 			retpoline	  - replace indirect branches
@@ -4051,6 +4122,48 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			Not specifying this option is equivalent to
 			spectre_v2=auto.
 
+	spectre_v2_user=
+			[X86] Control mitigation of Spectre variant 2
+		        (indirect branch speculation) vulnerability between
+		        user space tasks
+
+			on	- Unconditionally enable mitigations. Is
+				  enforced by spectre_v2=on
+
+			off     - Unconditionally disable mitigations. Is
+				  enforced by spectre_v2=off
+
+			prctl   - Indirect branch speculation is enabled,
+				  but mitigation can be enabled via prctl
+				  per thread.  The mitigation control state
+				  is inherited on fork.
+
+			prctl,ibpb
+				- Like "prctl" above, but only STIBP is
+				  controlled per thread. IBPB is issued
+				  always when switching between different user
+				  space processes.
+
+			seccomp
+				- Same as "prctl" above, but all seccomp
+				  threads will enable the mitigation unless
+				  they explicitly opt out.
+
+			seccomp,ibpb
+				- Like "seccomp" above, but only STIBP is
+				  controlled per thread. IBPB is issued
+				  always when switching between different
+				  user space processes.
+
+			auto    - Kernel selects the mitigation depending on
+				  the available CPU features and vulnerability.
+
+			Default mitigation:
+			If CONFIG_SECCOMP=y then "seccomp", otherwise "prctl"
+
+			Not specifying this option is equivalent to
+			spectre_v2_user=auto.
+
 	spec_store_bypass_disable=
 			[HW] Control Speculative Store Bypass (SSB) Disable mitigation
 			(Speculative Store Bypass vulnerability)
diff --git a/Documentation/l1tf.rst b/Documentation/l1tf.rst
deleted file mode 100644
index bae52b845de0..000000000000
--- a/Documentation/l1tf.rst
+++ /dev/null
@@ -1,610 +0,0 @@
-L1TF - L1 Terminal Fault
-========================
-
-L1 Terminal Fault is a hardware vulnerability which allows unprivileged
-speculative access to data which is available in the Level 1 Data Cache
-when the page table entry controlling the virtual address, which is used
-for the access, has the Present bit cleared or other reserved bits set.
-
-Affected processors
--------------------
-
-This vulnerability affects a wide range of Intel processors. The
-vulnerability is not present on:
-
-   - Processors from AMD, Centaur and other non Intel vendors
-
-   - Older processor models, where the CPU family is < 6
-
-   - A range of Intel ATOM processors (Cedarview, Cloverview, Lincroft,
-     Penwell, Pineview, Silvermont, Airmont, Merrifield)
-
-   - The Intel XEON PHI family
-
-   - Intel processors which have the ARCH_CAP_RDCL_NO bit set in the
-     IA32_ARCH_CAPABILITIES MSR. If the bit is set the CPU is not affected
-     by the Meltdown vulnerability either. These CPUs should become
-     available by end of 2018.
-
-Whether a processor is affected or not can be read out from the L1TF
-vulnerability file in sysfs. See :ref:`l1tf_sys_info`.
-
-Related CVEs
-------------
-
-The following CVE entries are related to the L1TF vulnerability:
-
-   =============  =================  ==============================
-   CVE-2018-3615  L1 Terminal Fault  SGX related aspects
-   CVE-2018-3620  L1 Terminal Fault  OS, SMM related aspects
-   CVE-2018-3646  L1 Terminal Fault  Virtualization related aspects
-   =============  =================  ==============================
-
-Problem
--------
-
-If an instruction accesses a virtual address for which the relevant page
-table entry (PTE) has the Present bit cleared or other reserved bits set,
-then speculative execution ignores the invalid PTE and loads the referenced
-data if it is present in the Level 1 Data Cache, as if the page referenced
-by the address bits in the PTE was still present and accessible.
-
-While this is a purely speculative mechanism and the instruction will raise
-a page fault when it is retired eventually, the pure act of loading the
-data and making it available to other speculative instructions opens up the
-opportunity for side channel attacks to unprivileged malicious code,
-similar to the Meltdown attack.
-
-While Meltdown breaks the user space to kernel space protection, L1TF
-allows to attack any physical memory address in the system and the attack
-works across all protection domains. It allows an attack of SGX and also
-works from inside virtual machines because the speculation bypasses the
-extended page table (EPT) protection mechanism.
-
-
-Attack scenarios
-----------------
-
-1. Malicious user space
-^^^^^^^^^^^^^^^^^^^^^^^
-
-   Operating Systems store arbitrary information in the address bits of a
-   PTE which is marked non present. This allows a malicious user space
-   application to attack the physical memory to which these PTEs resolve.
-   In some cases user-space can maliciously influence the information
-   encoded in the address bits of the PTE, thus making attacks more
-   deterministic and more practical.
-
-   The Linux kernel contains a mitigation for this attack vector, PTE
-   inversion, which is permanently enabled and has no performance
-   impact. The kernel ensures that the address bits of PTEs, which are not
-   marked present, never point to cacheable physical memory space.
-
-   A system with an up to date kernel is protected against attacks from
-   malicious user space applications.
-
-2. Malicious guest in a virtual machine
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-   The fact that L1TF breaks all domain protections allows malicious guest
-   OSes, which can control the PTEs directly, and malicious guest user
-   space applications, which run on an unprotected guest kernel lacking the
-   PTE inversion mitigation for L1TF, to attack physical host memory.
-
-   A special aspect of L1TF in the context of virtualization is symmetric
-   multi threading (SMT). The Intel implementation of SMT is called
-   HyperThreading. The fact that Hyperthreads on the affected processors
-   share the L1 Data Cache (L1D) is important for this. As the flaw allows
-   only to attack data which is present in L1D, a malicious guest running
-   on one Hyperthread can attack the data which is brought into the L1D by
-   the context which runs on the sibling Hyperthread of the same physical
-   core. This context can be host OS, host user space or a different guest.
-
-   If the processor does not support Extended Page Tables, the attack is
-   only possible, when the hypervisor does not sanitize the content of the
-   effective (shadow) page tables.
-
-   While solutions exist to mitigate these attack vectors fully, these
-   mitigations are not enabled by default in the Linux kernel because they
-   can affect performance significantly. The kernel provides several
-   mechanisms which can be utilized to address the problem depending on the
-   deployment scenario. The mitigations, their protection scope and impact
-   are described in the next sections.
-
-   The default mitigations and the rationale for choosing them are explained
-   at the end of this document. See :ref:`default_mitigations`.
-
-.. _l1tf_sys_info:
-
-L1TF system information
------------------------
-
-The Linux kernel provides a sysfs interface to enumerate the current L1TF
-status of the system: whether the system is vulnerable, and which
-mitigations are active. The relevant sysfs file is:
-
-/sys/devices/system/cpu/vulnerabilities/l1tf
-
-The possible values in this file are:
-
-  ===========================   ===============================
-  'Not affected'		The processor is not vulnerable
-  'Mitigation: PTE Inversion'	The host protection is active
-  ===========================   ===============================
-
-If KVM/VMX is enabled and the processor is vulnerable then the following
-information is appended to the 'Mitigation: PTE Inversion' part:
-
-  - SMT status:
-
-    =====================  ================
-    'VMX: SMT vulnerable'  SMT is enabled
-    'VMX: SMT disabled'    SMT is disabled
-    =====================  ================
-
-  - L1D Flush mode:
-
-    ================================  ====================================
-    'L1D vulnerable'		      L1D flushing is disabled
-
-    'L1D conditional cache flushes'   L1D flush is conditionally enabled
-
-    'L1D cache flushes'		      L1D flush is unconditionally enabled
-    ================================  ====================================
-
-The resulting grade of protection is discussed in the following sections.
-
-
-Host mitigation mechanism
--------------------------
-
-The kernel is unconditionally protected against L1TF attacks from malicious
-user space running on the host.
-
-
-Guest mitigation mechanisms
----------------------------
-
-.. _l1d_flush:
-
-1. L1D flush on VMENTER
-^^^^^^^^^^^^^^^^^^^^^^^
-
-   To make sure that a guest cannot attack data which is present in the L1D
-   the hypervisor flushes the L1D before entering the guest.
-
-   Flushing the L1D evicts not only the data which should not be accessed
-   by a potentially malicious guest, it also flushes the guest
-   data. Flushing the L1D has a performance impact as the processor has to
-   bring the flushed guest data back into the L1D. Depending on the
-   frequency of VMEXIT/VMENTER and the type of computations in the guest
-   performance degradation in the range of 1% to 50% has been observed. For
-   scenarios where guest VMEXIT/VMENTER are rare the performance impact is
-   minimal. Virtio and mechanisms like posted interrupts are designed to
-   confine the VMEXITs to a bare minimum, but specific configurations and
-   application scenarios might still suffer from a high VMEXIT rate.
-
-   The kernel provides two L1D flush modes:
-    - conditional ('cond')
-    - unconditional ('always')
-
-   The conditional mode avoids L1D flushing after VMEXITs which execute
-   only audited code paths before the corresponding VMENTER. These code
-   paths have been verified that they cannot expose secrets or other
-   interesting data to an attacker, but they can leak information about the
-   address space layout of the hypervisor.
-
-   Unconditional mode flushes L1D on all VMENTER invocations and provides
-   maximum protection. It has a higher overhead than the conditional
-   mode. The overhead cannot be quantified correctly as it depends on the
-   workload scenario and the resulting number of VMEXITs.
-
-   The general recommendation is to enable L1D flush on VMENTER. The kernel
-   defaults to conditional mode on affected processors.
-
-   **Note**, that L1D flush does not prevent the SMT problem because the
-   sibling thread will also bring back its data into the L1D which makes it
-   attackable again.
-
-   L1D flush can be controlled by the administrator via the kernel command
-   line and sysfs control files. See :ref:`mitigation_control_command_line`
-   and :ref:`mitigation_control_kvm`.
-
-.. _guest_confinement:
-
-2. Guest VCPU confinement to dedicated physical cores
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-   To address the SMT problem, it is possible to make a guest or a group of
-   guests affine to one or more physical cores. The proper mechanism for
-   that is to utilize exclusive cpusets to ensure that no other guest or
-   host tasks can run on these cores.
-
-   If only a single guest or related guests run on sibling SMT threads on
-   the same physical core then they can only attack their own memory and
-   restricted parts of the host memory.
-
-   Host memory is attackable, when one of the sibling SMT threads runs in
-   host OS (hypervisor) context and the other in guest context. The amount
-   of valuable information from the host OS context depends on the context
-   which the host OS executes, i.e. interrupts, soft interrupts and kernel
-   threads. The amount of valuable data from these contexts cannot be
-   declared as non-interesting for an attacker without deep inspection of
-   the code.
-
-   **Note**, that assigning guests to a fixed set of physical cores affects
-   the ability of the scheduler to do load balancing and might have
-   negative effects on CPU utilization depending on the hosting
-   scenario. Disabling SMT might be a viable alternative for particular
-   scenarios.
-
-   For further information about confining guests to a single or to a group
-   of cores consult the cpusets documentation:
-
-   https://www.kernel.org/doc/Documentation/cgroup-v1/cpusets.txt
-
-.. _interrupt_isolation:
-
-3. Interrupt affinity
-^^^^^^^^^^^^^^^^^^^^^
-
-   Interrupts can be made affine to logical CPUs. This is not universally
-   true because there are types of interrupts which are truly per CPU
-   interrupts, e.g. the local timer interrupt. Aside of that multi queue
-   devices affine their interrupts to single CPUs or groups of CPUs per
-   queue without allowing the administrator to control the affinities.
-
-   Moving the interrupts, which can be affinity controlled, away from CPUs
-   which run untrusted guests, reduces the attack vector space.
-
-   Whether the interrupts with are affine to CPUs, which run untrusted
-   guests, provide interesting data for an attacker depends on the system
-   configuration and the scenarios which run on the system. While for some
-   of the interrupts it can be assumed that they won't expose interesting
-   information beyond exposing hints about the host OS memory layout, there
-   is no way to make general assumptions.
-
-   Interrupt affinity can be controlled by the administrator via the
-   /proc/irq/$NR/smp_affinity[_list] files. Limited documentation is
-   available at:
-
-   https://www.kernel.org/doc/Documentation/IRQ-affinity.txt
-
-.. _smt_control:
-
-4. SMT control
-^^^^^^^^^^^^^^
-
-   To prevent the SMT issues of L1TF it might be necessary to disable SMT
-   completely. Disabling SMT can have a significant performance impact, but
-   the impact depends on the hosting scenario and the type of workloads.
-   The impact of disabling SMT needs also to be weighted against the impact
-   of other mitigation solutions like confining guests to dedicated cores.
-
-   The kernel provides a sysfs interface to retrieve the status of SMT and
-   to control it. It also provides a kernel command line interface to
-   control SMT.
-
-   The kernel command line interface consists of the following options:
-
-     =========== ==========================================================
-     nosmt	 Affects the bring up of the secondary CPUs during boot. The
-		 kernel tries to bring all present CPUs online during the
-		 boot process. "nosmt" makes sure that from each physical
-		 core only one - the so called primary (hyper) thread is
-		 activated. Due to a design flaw of Intel processors related
-		 to Machine Check Exceptions the non primary siblings have
-		 to be brought up at least partially and are then shut down
-		 again.  "nosmt" can be undone via the sysfs interface.
-
-     nosmt=force Has the same effect as "nosmt" but it does not allow to
-		 undo the SMT disable via the sysfs interface.
-     =========== ==========================================================
-
-   The sysfs interface provides two files:
-
-   - /sys/devices/system/cpu/smt/control
-   - /sys/devices/system/cpu/smt/active
-
-   /sys/devices/system/cpu/smt/control:
-
-     This file allows to read out the SMT control state and provides the
-     ability to disable or (re)enable SMT. The possible states are:
-
-	==============  ===================================================
-	on		SMT is supported by the CPU and enabled. All
-			logical CPUs can be onlined and offlined without
-			restrictions.
-
-	off		SMT is supported by the CPU and disabled. Only
-			the so called primary SMT threads can be onlined
-			and offlined without restrictions. An attempt to
-			online a non-primary sibling is rejected
-
-	forceoff	Same as 'off' but the state cannot be controlled.
-			Attempts to write to the control file are rejected.
-
-	notsupported	The processor does not support SMT. It's therefore
-			not affected by the SMT implications of L1TF.
-			Attempts to write to the control file are rejected.
-	==============  ===================================================
-
-     The possible states which can be written into this file to control SMT
-     state are:
-
-     - on
-     - off
-     - forceoff
-
-   /sys/devices/system/cpu/smt/active:
-
-     This file reports whether SMT is enabled and active, i.e. if on any
-     physical core two or more sibling threads are online.
-
-   SMT control is also possible at boot time via the l1tf kernel command
-   line parameter in combination with L1D flush control. See
-   :ref:`mitigation_control_command_line`.
-
-5. Disabling EPT
-^^^^^^^^^^^^^^^^
-
-  Disabling EPT for virtual machines provides full mitigation for L1TF even
-  with SMT enabled, because the effective page tables for guests are
-  managed and sanitized by the hypervisor. Though disabling EPT has a
-  significant performance impact especially when the Meltdown mitigation
-  KPTI is enabled.
-
-  EPT can be disabled in the hypervisor via the 'kvm-intel.ept' parameter.
-
-There is ongoing research and development for new mitigation mechanisms to
-address the performance impact of disabling SMT or EPT.
-
-.. _mitigation_control_command_line:
-
-Mitigation control on the kernel command line
----------------------------------------------
-
-The kernel command line allows to control the L1TF mitigations at boot
-time with the option "l1tf=". The valid arguments for this option are:
-
-  ============  =============================================================
-  full		Provides all available mitigations for the L1TF
-		vulnerability. Disables SMT and enables all mitigations in
-		the hypervisors, i.e. unconditional L1D flushing
-
-		SMT control and L1D flush control via the sysfs interface
-		is still possible after boot.  Hypervisors will issue a
-		warning when the first VM is started in a potentially
-		insecure configuration, i.e. SMT enabled or L1D flush
-		disabled.
-
-  full,force	Same as 'full', but disables SMT and L1D flush runtime
-		control. Implies the 'nosmt=force' command line option.
-		(i.e. sysfs control of SMT is disabled.)
-
-  flush		Leaves SMT enabled and enables the default hypervisor
-		mitigation, i.e. conditional L1D flushing
-
-		SMT control and L1D flush control via the sysfs interface
-		is still possible after boot.  Hypervisors will issue a
-		warning when the first VM is started in a potentially
-		insecure configuration, i.e. SMT enabled or L1D flush
-		disabled.
-
-  flush,nosmt	Disables SMT and enables the default hypervisor mitigation,
-		i.e. conditional L1D flushing.
-
-		SMT control and L1D flush control via the sysfs interface
-		is still possible after boot.  Hypervisors will issue a
-		warning when the first VM is started in a potentially
-		insecure configuration, i.e. SMT enabled or L1D flush
-		disabled.
-
-  flush,nowarn	Same as 'flush', but hypervisors will not warn when a VM is
-		started in a potentially insecure configuration.
-
-  off		Disables hypervisor mitigations and doesn't emit any
-		warnings.
-  ============  =============================================================
-
-The default is 'flush'. For details about L1D flushing see :ref:`l1d_flush`.
-
-
-.. _mitigation_control_kvm:
-
-Mitigation control for KVM - module parameter
--------------------------------------------------------------
-
-The KVM hypervisor mitigation mechanism, flushing the L1D cache when
-entering a guest, can be controlled with a module parameter.
-
-The option/parameter is "kvm-intel.vmentry_l1d_flush=". It takes the
-following arguments:
-
-  ============  ==============================================================
-  always	L1D cache flush on every VMENTER.
-
-  cond		Flush L1D on VMENTER only when the code between VMEXIT and
-		VMENTER can leak host memory which is considered
-		interesting for an attacker. This still can leak host memory
-		which allows e.g. to determine the hosts address space layout.
-
-  never		Disables the mitigation
-  ============  ==============================================================
-
-The parameter can be provided on the kernel command line, as a module
-parameter when loading the modules and at runtime modified via the sysfs
-file:
-
-/sys/module/kvm_intel/parameters/vmentry_l1d_flush
-
-The default is 'cond'. If 'l1tf=full,force' is given on the kernel command
-line, then 'always' is enforced and the kvm-intel.vmentry_l1d_flush
-module parameter is ignored and writes to the sysfs file are rejected.
-
-
-Mitigation selection guide
---------------------------
-
-1. No virtualization in use
-^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-   The system is protected by the kernel unconditionally and no further
-   action is required.
-
-2. Virtualization with trusted guests
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-   If the guest comes from a trusted source and the guest OS kernel is
-   guaranteed to have the L1TF mitigations in place the system is fully
-   protected against L1TF and no further action is required.
-
-   To avoid the overhead of the default L1D flushing on VMENTER the
-   administrator can disable the flushing via the kernel command line and
-   sysfs control files. See :ref:`mitigation_control_command_line` and
-   :ref:`mitigation_control_kvm`.
-
-
-3. Virtualization with untrusted guests
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-3.1. SMT not supported or disabled
-""""""""""""""""""""""""""""""""""
-
-  If SMT is not supported by the processor or disabled in the BIOS or by
-  the kernel, it's only required to enforce L1D flushing on VMENTER.
-
-  Conditional L1D flushing is the default behaviour and can be tuned. See
-  :ref:`mitigation_control_command_line` and :ref:`mitigation_control_kvm`.
-
-3.2. EPT not supported or disabled
-""""""""""""""""""""""""""""""""""
-
-  If EPT is not supported by the processor or disabled in the hypervisor,
-  the system is fully protected. SMT can stay enabled and L1D flushing on
-  VMENTER is not required.
-
-  EPT can be disabled in the hypervisor via the 'kvm-intel.ept' parameter.
-
-3.3. SMT and EPT supported and active
-"""""""""""""""""""""""""""""""""""""
-
-  If SMT and EPT are supported and active then various degrees of
-  mitigations can be employed:
-
-  - L1D flushing on VMENTER:
-
-    L1D flushing on VMENTER is the minimal protection requirement, but it
-    is only potent in combination with other mitigation methods.
-
-    Conditional L1D flushing is the default behaviour and can be tuned. See
-    :ref:`mitigation_control_command_line` and :ref:`mitigation_control_kvm`.
-
-  - Guest confinement:
-
-    Confinement of guests to a single or a group of physical cores which
-    are not running any other processes, can reduce the attack surface
-    significantly, but interrupts, soft interrupts and kernel threads can
-    still expose valuable data to a potential attacker. See
-    :ref:`guest_confinement`.
-
-  - Interrupt isolation:
-
-    Isolating the guest CPUs from interrupts can reduce the attack surface
-    further, but still allows a malicious guest to explore a limited amount
-    of host physical memory. This can at least be used to gain knowledge
-    about the host address space layout. The interrupts which have a fixed
-    affinity to the CPUs which run the untrusted guests can depending on
-    the scenario still trigger soft interrupts and schedule kernel threads
-    which might expose valuable information. See
-    :ref:`interrupt_isolation`.
-
-The above three mitigation methods combined can provide protection to a
-certain degree, but the risk of the remaining attack surface has to be
-carefully analyzed. For full protection the following methods are
-available:
-
-  - Disabling SMT:
-
-    Disabling SMT and enforcing the L1D flushing provides the maximum
-    amount of protection. This mitigation is not depending on any of the
-    above mitigation methods.
-
-    SMT control and L1D flushing can be tuned by the command line
-    parameters 'nosmt', 'l1tf', 'kvm-intel.vmentry_l1d_flush' and at run
-    time with the matching sysfs control files. See :ref:`smt_control`,
-    :ref:`mitigation_control_command_line` and
-    :ref:`mitigation_control_kvm`.
-
-  - Disabling EPT:
-
-    Disabling EPT provides the maximum amount of protection as well. It is
-    not depending on any of the above mitigation methods. SMT can stay
-    enabled and L1D flushing is not required, but the performance impact is
-    significant.
-
-    EPT can be disabled in the hypervisor via the 'kvm-intel.ept'
-    parameter.
-
-3.4. Nested virtual machines
-""""""""""""""""""""""""""""
-
-When nested virtualization is in use, three operating systems are involved:
-the bare metal hypervisor, the nested hypervisor and the nested virtual
-machine.  VMENTER operations from the nested hypervisor into the nested
-guest will always be processed by the bare metal hypervisor. If KVM is the
-bare metal hypervisor it wiil:
-
- - Flush the L1D cache on every switch from the nested hypervisor to the
-   nested virtual machine, so that the nested hypervisor's secrets are not
-   exposed to the nested virtual machine;
-
- - Flush the L1D cache on every switch from the nested virtual machine to
-   the nested hypervisor; this is a complex operation, and flushing the L1D
-   cache avoids that the bare metal hypervisor's secrets are exposed to the
-   nested virtual machine;
-
- - Instruct the nested hypervisor to not perform any L1D cache flush. This
-   is an optimization to avoid double L1D flushing.
-
-
-.. _default_mitigations:
-
-Default mitigations
--------------------
-
-  The kernel default mitigations for vulnerable processors are:
-
-  - PTE inversion to protect against malicious user space. This is done
-    unconditionally and cannot be controlled.
-
-  - L1D conditional flushing on VMENTER when EPT is enabled for
-    a guest.
-
-  The kernel does not by default enforce the disabling of SMT, which leaves
-  SMT systems vulnerable when running untrusted guests with EPT enabled.
-
-  The rationale for this choice is:
-
-  - Force disabling SMT can break existing setups, especially with
-    unattended updates.
-
-  - If regular users run untrusted guests on their machine, then L1TF is
-    just an add on to other malware which might be embedded in an untrusted
-    guest, e.g. spam-bots or attacks on the local network.
-
-    There is no technical way to prevent a user from running untrusted code
-    on their machines blindly.
-
-  - It's technically extremely unlikely and from today's knowledge even
-    impossible that L1TF can be exploited via the most popular attack
-    mechanisms like JavaScript because these mechanisms have no way to
-    control PTEs. If this would be possible and not other mitigation would
-    be possible, then the default might be different.
-
-  - The administrators of cloud and hosting setups have to carefully
-    analyze the risk for their scenarios and make the appropriate
-    mitigation choices, which might even vary across their deployed
-    machines and also result in other changes of their overall setup.
-    There is no way for the kernel to provide a sensible default for this
-    kind of scenarios.
diff --git a/Documentation/spec_ctrl.txt b/Documentation/spec_ctrl.txt
index 32f3d55c54b7..c4dbe6f7cdae 100644
--- a/Documentation/spec_ctrl.txt
+++ b/Documentation/spec_ctrl.txt
@@ -92,3 +92,12 @@ Speculation misfeature controls
    * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_STORE_BYPASS, PR_SPEC_ENABLE, 0, 0);
    * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_STORE_BYPASS, PR_SPEC_DISABLE, 0, 0);
    * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_STORE_BYPASS, PR_SPEC_FORCE_DISABLE, 0, 0);
+
+- PR_SPEC_INDIR_BRANCH: Indirect Branch Speculation in User Processes
+                        (Mitigate Spectre V2 style attacks against user processes)
+
+  Invocations:
+   * prctl(PR_GET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, 0, 0, 0);
+   * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, PR_SPEC_ENABLE, 0, 0);
+   * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, PR_SPEC_DISABLE, 0, 0);
+   * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, PR_SPEC_FORCE_DISABLE, 0, 0);
diff --git a/Documentation/x86/conf.py b/Documentation/x86/conf.py
new file mode 100644
index 000000000000..33c5c3142e20
--- /dev/null
+++ b/Documentation/x86/conf.py
@@ -0,0 +1,10 @@
+# -*- coding: utf-8; mode: python -*-
+
+project = "X86 architecture specific documentation"
+
+tags.add("subproject")
+
+latex_documents = [
+    ('index', 'x86.tex', project,
+     'The kernel development community', 'manual'),
+]
diff --git a/Documentation/x86/index.rst b/Documentation/x86/index.rst
new file mode 100644
index 000000000000..ef389dcf1b1d
--- /dev/null
+++ b/Documentation/x86/index.rst
@@ -0,0 +1,8 @@
+==========================
+x86 architecture specifics
+==========================
+
+.. toctree::
+   :maxdepth: 1
+
+   mds
diff --git a/Documentation/x86/mds.rst b/Documentation/x86/mds.rst
new file mode 100644
index 000000000000..534e9baa4e1d
--- /dev/null
+++ b/Documentation/x86/mds.rst
@@ -0,0 +1,225 @@
+Microarchitectural Data Sampling (MDS) mitigation
+=================================================
+
+.. _mds:
+
+Overview
+--------
+
+Microarchitectural Data Sampling (MDS) is a family of side channel attacks
+on internal buffers in Intel CPUs. The variants are:
+
+ - Microarchitectural Store Buffer Data Sampling (MSBDS) (CVE-2018-12126)
+ - Microarchitectural Fill Buffer Data Sampling (MFBDS) (CVE-2018-12130)
+ - Microarchitectural Load Port Data Sampling (MLPDS) (CVE-2018-12127)
+ - Microarchitectural Data Sampling Uncacheable Memory (MDSUM) (CVE-2019-11091)
+
+MSBDS leaks Store Buffer Entries which can be speculatively forwarded to a
+dependent load (store-to-load forwarding) as an optimization. The forward
+can also happen to a faulting or assisting load operation for a different
+memory address, which can be exploited under certain conditions. Store
+buffers are partitioned between Hyper-Threads so cross thread forwarding is
+not possible. But if a thread enters or exits a sleep state the store
+buffer is repartitioned which can expose data from one thread to the other.
+
+MFBDS leaks Fill Buffer Entries. Fill buffers are used internally to manage
+L1 miss situations and to hold data which is returned or sent in response
+to a memory or I/O operation. Fill buffers can forward data to a load
+operation and also write data to the cache. When the fill buffer is
+deallocated it can retain the stale data of the preceding operations which
+can then be forwarded to a faulting or assisting load operation, which can
+be exploited under certain conditions. Fill buffers are shared between
+Hyper-Threads so cross thread leakage is possible.
+
+MLPDS leaks Load Port Data. Load ports are used to perform load operations
+from memory or I/O. The received data is then forwarded to the register
+file or a subsequent operation. In some implementations the Load Port can
+contain stale data from a previous operation which can be forwarded to
+faulting or assisting loads under certain conditions, which again can be
+exploited eventually. Load ports are shared between Hyper-Threads so cross
+thread leakage is possible.
+
+MDSUM is a special case of MSBDS, MFBDS and MLPDS. An uncacheable load from
+memory that takes a fault or assist can leave data in a microarchitectural
+structure that may later be observed using one of the same methods used by
+MSBDS, MFBDS or MLPDS.
+
+Exposure assumptions
+--------------------
+
+It is assumed that attack code resides in user space or in a guest with one
+exception. The rationale behind this assumption is that the code construct
+needed for exploiting MDS requires:
+
+ - to control the load to trigger a fault or assist
+
+ - to have a disclosure gadget which exposes the speculatively accessed
+   data for consumption through a side channel.
+
+ - to control the pointer through which the disclosure gadget exposes the
+   data
+
+The existence of such a construct in the kernel cannot be excluded with
+100% certainty, but the complexity involved makes it extremly unlikely.
+
+There is one exception, which is untrusted BPF. The functionality of
+untrusted BPF is limited, but it needs to be thoroughly investigated
+whether it can be used to create such a construct.
+
+
+Mitigation strategy
+-------------------
+
+All variants have the same mitigation strategy at least for the single CPU
+thread case (SMT off): Force the CPU to clear the affected buffers.
+
+This is achieved by using the otherwise unused and obsolete VERW
+instruction in combination with a microcode update. The microcode clears
+the affected CPU buffers when the VERW instruction is executed.
+
+For virtualization there are two ways to achieve CPU buffer
+clearing. Either the modified VERW instruction or via the L1D Flush
+command. The latter is issued when L1TF mitigation is enabled so the extra
+VERW can be avoided. If the CPU is not affected by L1TF then VERW needs to
+be issued.
+
+If the VERW instruction with the supplied segment selector argument is
+executed on a CPU without the microcode update there is no side effect
+other than a small number of pointlessly wasted CPU cycles.
+
+This does not protect against cross Hyper-Thread attacks except for MSBDS
+which is only exploitable cross Hyper-thread when one of the Hyper-Threads
+enters a C-state.
+
+The kernel provides a function to invoke the buffer clearing:
+
+    mds_clear_cpu_buffers()
+
+The mitigation is invoked on kernel/userspace, hypervisor/guest and C-state
+(idle) transitions.
+
+As a special quirk to address virtualization scenarios where the host has
+the microcode updated, but the hypervisor does not (yet) expose the
+MD_CLEAR CPUID bit to guests, the kernel issues the VERW instruction in the
+hope that it might actually clear the buffers. The state is reflected
+accordingly.
+
+According to current knowledge additional mitigations inside the kernel
+itself are not required because the necessary gadgets to expose the leaked
+data cannot be controlled in a way which allows exploitation from malicious
+user space or VM guests.
+
+Kernel internal mitigation modes
+--------------------------------
+
+ ======= ============================================================
+ off      Mitigation is disabled. Either the CPU is not affected or
+          mds=off is supplied on the kernel command line
+
+ full     Mitigation is enabled. CPU is affected and MD_CLEAR is
+          advertised in CPUID.
+
+ vmwerv	  Mitigation is enabled. CPU is affected and MD_CLEAR is not
+	  advertised in CPUID. That is mainly for virtualization
+	  scenarios where the host has the updated microcode but the
+	  hypervisor does not expose MD_CLEAR in CPUID. It's a best
+	  effort approach without guarantee.
+ ======= ============================================================
+
+If the CPU is affected and mds=off is not supplied on the kernel command
+line then the kernel selects the appropriate mitigation mode depending on
+the availability of the MD_CLEAR CPUID bit.
+
+Mitigation points
+-----------------
+
+1. Return to user space
+^^^^^^^^^^^^^^^^^^^^^^^
+
+   When transitioning from kernel to user space the CPU buffers are flushed
+   on affected CPUs when the mitigation is not disabled on the kernel
+   command line. The migitation is enabled through the static key
+   mds_user_clear.
+
+   The mitigation is invoked in prepare_exit_to_usermode() which covers
+   most of the kernel to user space transitions. There are a few exceptions
+   which are not invoking prepare_exit_to_usermode() on return to user
+   space. These exceptions use the paranoid exit code.
+
+   - Non Maskable Interrupt (NMI):
+
+     Access to sensible data like keys, credentials in the NMI context is
+     mostly theoretical: The CPU can do prefetching or execute a
+     misspeculated code path and thereby fetching data which might end up
+     leaking through a buffer.
+
+     But for mounting other attacks the kernel stack address of the task is
+     already valuable information. So in full mitigation mode, the NMI is
+     mitigated on the return from do_nmi() to provide almost complete
+     coverage.
+
+   - Double fault (#DF):
+
+     A double fault is usually fatal, but the ESPFIX workaround, which can
+     be triggered from user space through modify_ldt(2) is a recoverable
+     double fault. #DF uses the paranoid exit path, so explicit mitigation
+     in the double fault handler is required.
+
+   - Machine Check Exception (#MC):
+
+     Another corner case is a #MC which hits between the CPU buffer clear
+     invocation and the actual return to user. As this still is in kernel
+     space it takes the paranoid exit path which does not clear the CPU
+     buffers. So the #MC handler repopulates the buffers to some
+     extent. Machine checks are not reliably controllable and the window is
+     extremly small so mitigation would just tick a checkbox that this
+     theoretical corner case is covered. To keep the amount of special
+     cases small, ignore #MC.
+
+   - Debug Exception (#DB):
+
+     This takes the paranoid exit path only when the INT1 breakpoint is in
+     kernel space. #DB on a user space address takes the regular exit path,
+     so no extra mitigation required.
+
+
+2. C-State transition
+^^^^^^^^^^^^^^^^^^^^^
+
+   When a CPU goes idle and enters a C-State the CPU buffers need to be
+   cleared on affected CPUs when SMT is active. This addresses the
+   repartitioning of the store buffer when one of the Hyper-Threads enters
+   a C-State.
+
+   When SMT is inactive, i.e. either the CPU does not support it or all
+   sibling threads are offline CPU buffer clearing is not required.
+
+   The idle clearing is enabled on CPUs which are only affected by MSBDS
+   and not by any other MDS variant. The other MDS variants cannot be
+   protected against cross Hyper-Thread attacks because the Fill Buffer and
+   the Load Ports are shared. So on CPUs affected by other variants, the
+   idle clearing would be a window dressing exercise and is therefore not
+   activated.
+
+   The invocation is controlled by the static key mds_idle_clear which is
+   switched depending on the chosen mitigation mode and the SMT state of
+   the system.
+
+   The buffer clear is only invoked before entering the C-State to prevent
+   that stale data from the idling CPU from spilling to the Hyper-Thread
+   sibling after the store buffer got repartitioned and all entries are
+   available to the non idle sibling.
+
+   When coming out of idle the store buffer is partitioned again so each
+   sibling has half of it available. The back from idle CPU could be then
+   speculatively exposed to contents of the sibling. The buffers are
+   flushed either on exit to user space or on VMENTER so malicious code
+   in user space or the guest cannot speculatively access them.
+
+   The mitigation is hooked into all variants of halt()/mwait(), but does
+   not cover the legacy ACPI IO-Port mechanism because the ACPI idle driver
+   has been superseded by the intel_idle driver around 2010 and is
+   preferred on all affected CPUs which are expected to gain the MD_CLEAR
+   functionality in microcode. Aside of that the IO-Port mechanism is a
+   legacy interface which is only used on older systems which are either
+   not affected or do not receive microcode updates anymore.
diff --git a/Makefile b/Makefile
index e52b0579e176..92fe701e5582 100644
--- a/Makefile
+++ b/Makefile
@@ -1,6 +1,6 @@
 VERSION = 4
 PATCHLEVEL = 9
-SUBLEVEL = 175
+SUBLEVEL = 176
 EXTRAVERSION =
 NAME = Roaring Lionus
 
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 5a4591ff8407..e0055b4302d6 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -937,13 +937,7 @@ config NR_CPUS
 	  approximately eight kilobytes to the kernel image.
 
 config SCHED_SMT
-	bool "SMT (Hyperthreading) scheduler support"
-	depends on SMP
-	---help---
-	  SMT scheduler support improves the CPU scheduler's decision making
-	  when dealing with Intel Pentium 4 chips with HyperThreading at a
-	  cost of slightly increased overhead in some places. If unsure say
-	  N here.
+	def_bool y if SMP
 
 config SCHED_MC
 	def_bool y
diff --git a/arch/x86/entry/common.c b/arch/x86/entry/common.c
index b0cd306dc527..8841d016b4a4 100644
--- a/arch/x86/entry/common.c
+++ b/arch/x86/entry/common.c
@@ -28,6 +28,7 @@
 #include <asm/vdso.h>
 #include <asm/uaccess.h>
 #include <asm/cpufeature.h>
+#include <asm/nospec-branch.h>
 
 #define CREATE_TRACE_POINTS
 #include <trace/events/syscalls.h>
@@ -206,6 +207,8 @@ __visible inline void prepare_exit_to_usermode(struct pt_regs *regs)
 #endif
 
 	user_enter_irqoff();
+
+	mds_user_clear_cpu_buffers();
 }
 
 #define SYSCALL_EXIT_WORK_FLAGS				\
diff --git a/arch/x86/events/intel/core.c b/arch/x86/events/intel/core.c
index a30829052a00..cb8178a2783a 100644
--- a/arch/x86/events/intel/core.c
+++ b/arch/x86/events/intel/core.c
@@ -3750,11 +3750,11 @@ __init int intel_pmu_init(void)
 		pr_cont("Nehalem events, ");
 		break;
 
-	case INTEL_FAM6_ATOM_PINEVIEW:
-	case INTEL_FAM6_ATOM_LINCROFT:
-	case INTEL_FAM6_ATOM_PENWELL:
-	case INTEL_FAM6_ATOM_CLOVERVIEW:
-	case INTEL_FAM6_ATOM_CEDARVIEW:
+	case INTEL_FAM6_ATOM_BONNELL:
+	case INTEL_FAM6_ATOM_BONNELL_MID:
+	case INTEL_FAM6_ATOM_SALTWELL:
+	case INTEL_FAM6_ATOM_SALTWELL_MID:
+	case INTEL_FAM6_ATOM_SALTWELL_TABLET:
 		memcpy(hw_cache_event_ids, atom_hw_cache_event_ids,
 		       sizeof(hw_cache_event_ids));
 
@@ -3766,9 +3766,11 @@ __init int intel_pmu_init(void)
 		pr_cont("Atom events, ");
 		break;
 
-	case INTEL_FAM6_ATOM_SILVERMONT1:
-	case INTEL_FAM6_ATOM_SILVERMONT2:
+	case INTEL_FAM6_ATOM_SILVERMONT:
+	case INTEL_FAM6_ATOM_SILVERMONT_X:
+	case INTEL_FAM6_ATOM_SILVERMONT_MID:
 	case INTEL_FAM6_ATOM_AIRMONT:
+	case INTEL_FAM6_ATOM_AIRMONT_MID:
 		memcpy(hw_cache_event_ids, slm_hw_cache_event_ids,
 			sizeof(hw_cache_event_ids));
 		memcpy(hw_cache_extra_regs, slm_hw_cache_extra_regs,
@@ -3785,7 +3787,7 @@ __init int intel_pmu_init(void)
 		break;
 
 	case INTEL_FAM6_ATOM_GOLDMONT:
-	case INTEL_FAM6_ATOM_DENVERTON:
+	case INTEL_FAM6_ATOM_GOLDMONT_X:
 		memcpy(hw_cache_event_ids, glm_hw_cache_event_ids,
 		       sizeof(hw_cache_event_ids));
 		memcpy(hw_cache_extra_regs, glm_hw_cache_extra_regs,
diff --git a/arch/x86/events/intel/cstate.c b/arch/x86/events/intel/cstate.c
index 47d526c700a1..72d09340c24d 100644
--- a/arch/x86/events/intel/cstate.c
+++ b/arch/x86/events/intel/cstate.c
@@ -531,8 +531,8 @@ static const struct x86_cpu_id intel_cstates_match[] __initconst = {
 
 	X86_CSTATES_MODEL(INTEL_FAM6_HASWELL_ULT, hswult_cstates),
 
-	X86_CSTATES_MODEL(INTEL_FAM6_ATOM_SILVERMONT1, slm_cstates),
-	X86_CSTATES_MODEL(INTEL_FAM6_ATOM_SILVERMONT2, slm_cstates),
+	X86_CSTATES_MODEL(INTEL_FAM6_ATOM_SILVERMONT, slm_cstates),
+	X86_CSTATES_MODEL(INTEL_FAM6_ATOM_SILVERMONT_X, slm_cstates),
 	X86_CSTATES_MODEL(INTEL_FAM6_ATOM_AIRMONT,     slm_cstates),
 
 	X86_CSTATES_MODEL(INTEL_FAM6_BROADWELL_CORE,   snb_cstates),
diff --git a/arch/x86/events/msr.c b/arch/x86/events/msr.c
index be0b1968d60a..68144a341903 100644
--- a/arch/x86/events/msr.c
+++ b/arch/x86/events/msr.c
@@ -61,8 +61,8 @@ static bool test_intel(int idx)
 	case INTEL_FAM6_BROADWELL_GT3E:
 	case INTEL_FAM6_BROADWELL_X:
 
-	case INTEL_FAM6_ATOM_SILVERMONT1:
-	case INTEL_FAM6_ATOM_SILVERMONT2:
+	case INTEL_FAM6_ATOM_SILVERMONT:
+	case INTEL_FAM6_ATOM_SILVERMONT_X:
 	case INTEL_FAM6_ATOM_AIRMONT:
 		if (idx == PERF_MSR_SMI)
 			return true;
diff --git a/arch/x86/include/asm/cpufeatures.h b/arch/x86/include/asm/cpufeatures.h
index 98444b77fbe3..06de338be0d8 100644
--- a/arch/x86/include/asm/cpufeatures.h
+++ b/arch/x86/include/asm/cpufeatures.h
@@ -271,10 +271,12 @@
 /* AMD-defined CPU features, CPUID level 0x80000008 (ebx), word 13 */
 #define X86_FEATURE_CLZERO	(13*32+0) /* CLZERO instruction */
 #define X86_FEATURE_IRPERF	(13*32+1) /* Instructions Retired Count */
-#define X86_FEATURE_AMD_IBPB	(13*32+12) /* Indirect Branch Prediction Barrier */
-#define X86_FEATURE_AMD_IBRS	(13*32+14) /* Indirect Branch Restricted Speculation */
-#define X86_FEATURE_AMD_STIBP	(13*32+15) /* Single Thread Indirect Branch Predictors */
+#define X86_FEATURE_AMD_IBPB	(13*32+12) /* "" Indirect Branch Prediction Barrier */
+#define X86_FEATURE_AMD_IBRS	(13*32+14) /* "" Indirect Branch Restricted Speculation */
+#define X86_FEATURE_AMD_STIBP	(13*32+15) /* "" Single Thread Indirect Branch Predictors */
+#define X86_FEATURE_AMD_SSBD	(13*32+24) /* "" Speculative Store Bypass Disable */
 #define X86_FEATURE_VIRT_SSBD	(13*32+25) /* Virtualized Speculative Store Bypass Disable */
+#define X86_FEATURE_AMD_SSB_NO	(13*32+26) /* "" Speculative Store Bypass is fixed in hardware. */
 
 /* Thermal and Power Management Leaf, CPUID level 0x00000006 (eax), word 14 */
 #define X86_FEATURE_DTHERM	(14*32+ 0) /* Digital Thermal Sensor */
@@ -315,6 +317,7 @@
 #define X86_FEATURE_AVX512_4VNNIW	(18*32+ 2) /* AVX-512 Neural Network Instructions */
 #define X86_FEATURE_AVX512_4FMAPS	(18*32+ 3) /* AVX-512 Multiply Accumulation Single precision */
 #define X86_FEATURE_TSX_FORCE_ABORT	(18*32+13) /* "" TSX_FORCE_ABORT */
+#define X86_FEATURE_MD_CLEAR		(18*32+10) /* VERW clears CPU buffers */
 #define X86_FEATURE_PCONFIG		(18*32+18) /* Intel PCONFIG */
 #define X86_FEATURE_SPEC_CTRL		(18*32+26) /* "" Speculation Control (IBRS + IBPB) */
 #define X86_FEATURE_INTEL_STIBP		(18*32+27) /* "" Single Thread Indirect Branch Predictors */
@@ -352,5 +355,7 @@
 #define X86_BUG_SPECTRE_V2	X86_BUG(16) /* CPU is affected by Spectre variant 2 attack with indirect branches */
 #define X86_BUG_SPEC_STORE_BYPASS X86_BUG(17) /* CPU is affected by speculative store bypass attack */
 #define X86_BUG_L1TF		X86_BUG(18) /* CPU is affected by L1 Terminal Fault */
+#define X86_BUG_MDS		X86_BUG(19) /* CPU is affected by Microarchitectural data sampling */
+#define X86_BUG_MSBDS_ONLY	X86_BUG(20) /* CPU is only affected by the  MSDBS variant of BUG_MDS */
 
 #endif /* _ASM_X86_CPUFEATURES_H */
diff --git a/arch/x86/include/asm/intel-family.h b/arch/x86/include/asm/intel-family.h
index 75b748a1deb8..ba7b6f736414 100644
--- a/arch/x86/include/asm/intel-family.h
+++ b/arch/x86/include/asm/intel-family.h
@@ -50,19 +50,23 @@
 
 /* "Small Core" Processors (Atom) */
 
-#define INTEL_FAM6_ATOM_PINEVIEW	0x1C
-#define INTEL_FAM6_ATOM_LINCROFT	0x26
-#define INTEL_FAM6_ATOM_PENWELL		0x27
-#define INTEL_FAM6_ATOM_CLOVERVIEW	0x35
-#define INTEL_FAM6_ATOM_CEDARVIEW	0x36
-#define INTEL_FAM6_ATOM_SILVERMONT1	0x37 /* BayTrail/BYT / Valleyview */
-#define INTEL_FAM6_ATOM_SILVERMONT2	0x4D /* Avaton/Rangely */
-#define INTEL_FAM6_ATOM_AIRMONT		0x4C /* CherryTrail / Braswell */
-#define INTEL_FAM6_ATOM_MERRIFIELD	0x4A /* Tangier */
-#define INTEL_FAM6_ATOM_MOOREFIELD	0x5A /* Anniedale */
-#define INTEL_FAM6_ATOM_GOLDMONT	0x5C
-#define INTEL_FAM6_ATOM_DENVERTON	0x5F /* Goldmont Microserver */
-#define INTEL_FAM6_ATOM_GEMINI_LAKE	0x7A
+#define INTEL_FAM6_ATOM_BONNELL		0x1C /* Diamondville, Pineview */
+#define INTEL_FAM6_ATOM_BONNELL_MID	0x26 /* Silverthorne, Lincroft */
+
+#define INTEL_FAM6_ATOM_SALTWELL	0x36 /* Cedarview */
+#define INTEL_FAM6_ATOM_SALTWELL_MID	0x27 /* Penwell */
+#define INTEL_FAM6_ATOM_SALTWELL_TABLET	0x35 /* Cloverview */
+
+#define INTEL_FAM6_ATOM_SILVERMONT	0x37 /* Bay Trail, Valleyview */
+#define INTEL_FAM6_ATOM_SILVERMONT_X	0x4D /* Avaton, Rangely */
+#define INTEL_FAM6_ATOM_SILVERMONT_MID	0x4A /* Merriefield */
+
+#define INTEL_FAM6_ATOM_AIRMONT		0x4C /* Cherry Trail, Braswell */
+#define INTEL_FAM6_ATOM_AIRMONT_MID	0x5A /* Moorefield */
+
+#define INTEL_FAM6_ATOM_GOLDMONT	0x5C /* Apollo Lake */
+#define INTEL_FAM6_ATOM_GOLDMONT_X	0x5F /* Denverton */
+#define INTEL_FAM6_ATOM_GOLDMONT_PLUS	0x7A /* Gemini Lake */
 
 /* Xeon Phi */
 
diff --git a/arch/x86/include/asm/irqflags.h b/arch/x86/include/asm/irqflags.h
index 508a062e6cf1..0c8f4281b151 100644
--- a/arch/x86/include/asm/irqflags.h
+++ b/arch/x86/include/asm/irqflags.h
@@ -5,6 +5,8 @@
 
 #ifndef __ASSEMBLY__
 
+#include <asm/nospec-branch.h>
+
 /* Provide __cpuidle; we can't safely include <linux/cpu.h> */
 #define __cpuidle __attribute__((__section__(".cpuidle.text")))
 
@@ -53,11 +55,13 @@ static inline void native_irq_enable(void)
 
 static inline __cpuidle void native_safe_halt(void)
 {
+	mds_idle_clear_cpu_buffers();
 	asm volatile("sti; hlt": : :"memory");
 }
 
 static inline __cpuidle void native_halt(void)
 {
+	mds_idle_clear_cpu_buffers();
 	asm volatile("hlt": : :"memory");
 }
 
diff --git a/arch/x86/include/asm/microcode_intel.h b/arch/x86/include/asm/microcode_intel.h
index 5e69154c9f07..a61ec81b27db 100644
--- a/arch/x86/include/asm/microcode_intel.h
+++ b/arch/x86/include/asm/microcode_intel.h
@@ -52,6 +52,21 @@ struct extended_sigtable {
 
 #define exttable_size(et) ((et)->count * EXT_SIGNATURE_SIZE + EXT_HEADER_SIZE)
 
+static inline u32 intel_get_microcode_revision(void)
+{
+	u32 rev, dummy;
+
+	native_wrmsrl(MSR_IA32_UCODE_REV, 0);
+
+	/* As documented in the SDM: Do a CPUID 1 here */
+	sync_core();
+
+	/* get the current revision from MSR 0x8B */
+	native_rdmsr(MSR_IA32_UCODE_REV, dummy, rev);
+
+	return rev;
+}
+
 extern int has_newer_microcode(void *mc, unsigned int csig, int cpf, int rev);
 extern int microcode_sanity_check(void *mc, int print_err);
 extern int find_matching_signature(void *mc, unsigned int csig, int cpf);
diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
index 9963e21ac443..38f94d07920d 100644
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -1,6 +1,8 @@
 #ifndef _ASM_X86_MSR_INDEX_H
 #define _ASM_X86_MSR_INDEX_H
 
+#include <linux/bits.h>
+
 /*
  * CPU model specific register (MSR) numbers.
  *
@@ -38,13 +40,14 @@
 
 /* Intel MSRs. Some also available on other CPUs */
 #define MSR_IA32_SPEC_CTRL		0x00000048 /* Speculation Control */
-#define SPEC_CTRL_IBRS			(1 << 0)   /* Indirect Branch Restricted Speculation */
-#define SPEC_CTRL_STIBP			(1 << 1)   /* Single Thread Indirect Branch Predictors */
+#define SPEC_CTRL_IBRS			BIT(0)	   /* Indirect Branch Restricted Speculation */
+#define SPEC_CTRL_STIBP_SHIFT		1	   /* Single Thread Indirect Branch Predictor (STIBP) bit */
+#define SPEC_CTRL_STIBP			BIT(SPEC_CTRL_STIBP_SHIFT)	/* STIBP mask */
 #define SPEC_CTRL_SSBD_SHIFT		2	   /* Speculative Store Bypass Disable bit */
-#define SPEC_CTRL_SSBD			(1 << SPEC_CTRL_SSBD_SHIFT)   /* Speculative Store Bypass Disable */
+#define SPEC_CTRL_SSBD			BIT(SPEC_CTRL_SSBD_SHIFT)	/* Speculative Store Bypass Disable */
 
 #define MSR_IA32_PRED_CMD		0x00000049 /* Prediction Command */
-#define PRED_CMD_IBPB			(1 << 0)   /* Indirect Branch Prediction Barrier */
+#define PRED_CMD_IBPB			BIT(0)	   /* Indirect Branch Prediction Barrier */
 
 #define MSR_IA32_PERFCTR0		0x000000c1
 #define MSR_IA32_PERFCTR1		0x000000c2
@@ -61,20 +64,25 @@
 #define MSR_MTRRcap			0x000000fe
 
 #define MSR_IA32_ARCH_CAPABILITIES	0x0000010a
-#define ARCH_CAP_RDCL_NO		(1 << 0)   /* Not susceptible to Meltdown */
-#define ARCH_CAP_IBRS_ALL		(1 << 1)   /* Enhanced IBRS support */
-#define ARCH_CAP_SKIP_VMENTRY_L1DFLUSH	(1 << 3)   /* Skip L1D flush on vmentry */
-#define ARCH_CAP_SSB_NO			(1 << 4)   /*
-						    * Not susceptible to Speculative Store Bypass
-						    * attack, so no Speculative Store Bypass
-						    * control required.
-						    */
+#define ARCH_CAP_RDCL_NO		BIT(0)	/* Not susceptible to Meltdown */
+#define ARCH_CAP_IBRS_ALL		BIT(1)	/* Enhanced IBRS support */
+#define ARCH_CAP_SKIP_VMENTRY_L1DFLUSH	BIT(3)	/* Skip L1D flush on vmentry */
+#define ARCH_CAP_SSB_NO			BIT(4)	/*
+						 * Not susceptible to Speculative Store Bypass
+						 * attack, so no Speculative Store Bypass
+						 * control required.
+						 */
+#define ARCH_CAP_MDS_NO			BIT(5)   /*
+						  * Not susceptible to
+						  * Microarchitectural Data
+						  * Sampling (MDS) vulnerabilities.
+						  */
 
 #define MSR_IA32_FLUSH_CMD		0x0000010b
-#define L1D_FLUSH			(1 << 0)   /*
-						    * Writeback and invalidate the
-						    * L1 data cache.
-						    */
+#define L1D_FLUSH			BIT(0)	/*
+						 * Writeback and invalidate the
+						 * L1 data cache.
+						 */
 
 #define MSR_IA32_BBL_CR_CTL		0x00000119
 #define MSR_IA32_BBL_CR_CTL3		0x0000011e
diff --git a/arch/x86/include/asm/mwait.h b/arch/x86/include/asm/mwait.h
index f37f2d8a2989..0b40cc442bda 100644
--- a/arch/x86/include/asm/mwait.h
+++ b/arch/x86/include/asm/mwait.h
@@ -4,6 +4,7 @@
 #include <linux/sched.h>
 
 #include <asm/cpufeature.h>
+#include <asm/nospec-branch.h>
 
 #define MWAIT_SUBSTATE_MASK		0xf
 #define MWAIT_CSTATE_MASK		0xf
@@ -38,6 +39,8 @@ static inline void __monitorx(const void *eax, unsigned long ecx,
 
 static inline void __mwait(unsigned long eax, unsigned long ecx)
 {
+	mds_idle_clear_cpu_buffers();
+
 	/* "mwait %eax, %ecx;" */
 	asm volatile(".byte 0x0f, 0x01, 0xc9;"
 		     :: "a" (eax), "c" (ecx));
@@ -72,6 +75,8 @@ static inline void __mwait(unsigned long eax, unsigned long ecx)
 static inline void __mwaitx(unsigned long eax, unsigned long ebx,
 			    unsigned long ecx)
 {
+	/* No MDS buffer clear as this is AMD/HYGON only */
+
 	/* "mwaitx %eax, %ebx, %ecx;" */
 	asm volatile(".byte 0x0f, 0x01, 0xfb;"
 		     :: "a" (eax), "b" (ebx), "c" (ecx));
@@ -79,6 +84,8 @@ static inline void __mwaitx(unsigned long eax, unsigned long ebx,
 
 static inline void __sti_mwait(unsigned long eax, unsigned long ecx)
 {
+	mds_idle_clear_cpu_buffers();
+
 	trace_hardirqs_on();
 	/* "mwait %eax, %ecx;" */
 	asm volatile("sti; .byte 0x0f, 0x01, 0xc9;"
diff --git a/arch/x86/include/asm/nospec-branch.h b/arch/x86/include/asm/nospec-branch.h
index 1b4132161c1f..031a58e84e5b 100644
--- a/arch/x86/include/asm/nospec-branch.h
+++ b/arch/x86/include/asm/nospec-branch.h
@@ -3,6 +3,8 @@
 #ifndef _ASM_X86_NOSPEC_BRANCH_H_
 #define _ASM_X86_NOSPEC_BRANCH_H_
 
+#include <linux/static_key.h>
+
 #include <asm/alternative.h>
 #include <asm/alternative-asm.h>
 #include <asm/cpufeatures.h>
@@ -214,10 +216,17 @@ enum spectre_v2_mitigation {
 	SPECTRE_V2_RETPOLINE_MINIMAL_AMD,
 	SPECTRE_V2_RETPOLINE_GENERIC,
 	SPECTRE_V2_RETPOLINE_AMD,
-	SPECTRE_V2_IBRS,
 	SPECTRE_V2_IBRS_ENHANCED,
 };
 
+/* The indirect branch speculation control variants */
+enum spectre_v2_user_mitigation {
+	SPECTRE_V2_USER_NONE,
+	SPECTRE_V2_USER_STRICT,
+	SPECTRE_V2_USER_PRCTL,
+	SPECTRE_V2_USER_SECCOMP,
+};
+
 /* The Speculative Store Bypass disable variants */
 enum ssb_mitigation {
 	SPEC_STORE_BYPASS_NONE,
@@ -295,6 +304,60 @@ do {									\
 	preempt_enable();						\
 } while (0)
 
+DECLARE_STATIC_KEY_FALSE(switch_to_cond_stibp);
+DECLARE_STATIC_KEY_FALSE(switch_mm_cond_ibpb);
+DECLARE_STATIC_KEY_FALSE(switch_mm_always_ibpb);
+
+DECLARE_STATIC_KEY_FALSE(mds_user_clear);
+DECLARE_STATIC_KEY_FALSE(mds_idle_clear);
+
+#include <asm/segment.h>
+
+/**
+ * mds_clear_cpu_buffers - Mitigation for MDS vulnerability
+ *
+ * This uses the otherwise unused and obsolete VERW instruction in
+ * combination with microcode which triggers a CPU buffer flush when the
+ * instruction is executed.
+ */
+static inline void mds_clear_cpu_buffers(void)
+{
+	static const u16 ds = __KERNEL_DS;
+
+	/*
+	 * Has to be the memory-operand variant because only that
+	 * guarantees the CPU buffer flush functionality according to
+	 * documentation. The register-operand variant does not.
+	 * Works with any segment selector, but a valid writable
+	 * data segment is the fastest variant.
+	 *
+	 * "cc" clobber is required because VERW modifies ZF.
+	 */
+	asm volatile("verw %[ds]" : : [ds] "m" (ds) : "cc");
+}
+
+/**
+ * mds_user_clear_cpu_buffers - Mitigation for MDS vulnerability
+ *
+ * Clear CPU buffers if the corresponding static key is enabled
+ */
+static inline void mds_user_clear_cpu_buffers(void)
+{
+	if (static_branch_likely(&mds_user_clear))
+		mds_clear_cpu_buffers();
+}
+
+/**
+ * mds_idle_clear_cpu_buffers - Mitigation for MDS vulnerability
+ *
+ * Clear CPU buffers if the corresponding static key is enabled
+ */
+static inline void mds_idle_clear_cpu_buffers(void)
+{
+	if (static_branch_likely(&mds_idle_clear))
+		mds_clear_cpu_buffers();
+}
+
 #endif /* __ASSEMBLY__ */
 
 /*
diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
index 221a32ed1372..f12e61e2a86b 100644
--- a/arch/x86/include/asm/pgtable_64.h
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -44,15 +44,15 @@ struct mm_struct;
 void set_pte_vaddr_pud(pud_t *pud_page, unsigned long vaddr, pte_t new_pte);
 
 
-static inline void native_pte_clear(struct mm_struct *mm, unsigned long addr,
-				    pte_t *ptep)
+static inline void native_set_pte(pte_t *ptep, pte_t pte)
 {
-	*ptep = native_make_pte(0);
+	WRITE_ONCE(*ptep, pte);
 }
 
-static inline void native_set_pte(pte_t *ptep, pte_t pte)
+static inline void native_pte_clear(struct mm_struct *mm, unsigned long addr,
+				    pte_t *ptep)
 {
-	*ptep = pte;
+	native_set_pte(ptep, native_make_pte(0));
 }
 
 static inline void native_set_pte_atomic(pte_t *ptep, pte_t pte)
@@ -62,7 +62,7 @@ static inline void native_set_pte_atomic(pte_t *ptep, pte_t pte)
 
 static inline void native_set_pmd(pmd_t *pmdp, pmd_t pmd)
 {
-	*pmdp = pmd;
+	WRITE_ONCE(*pmdp, pmd);
 }
 
 static inline void native_pmd_clear(pmd_t *pmd)
@@ -98,7 +98,7 @@ static inline pmd_t native_pmdp_get_and_clear(pmd_t *xp)
 
 static inline void native_set_pud(pud_t *pudp, pud_t pud)
 {
-	*pudp = pud;
+	WRITE_ONCE(*pudp, pud);
 }
 
 static inline void native_pud_clear(pud_t *pud)
@@ -131,7 +131,7 @@ static inline pgd_t *native_get_shadow_pgd(pgd_t *pgdp)
 
 static inline void native_set_pgd(pgd_t *pgdp, pgd_t pgd)
 {
-	*pgdp = kaiser_set_shadow_pgd(pgdp, pgd);
+	WRITE_ONCE(*pgdp, kaiser_set_shadow_pgd(pgdp, pgd));
 }
 
 static inline void native_pgd_clear(pgd_t *pgd)
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index ee8c6290c421..155e49fc7010 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -874,4 +874,10 @@ enum l1tf_mitigations {
 
 extern enum l1tf_mitigations l1tf_mitigation;
 
+enum mds_mitigations {
+	MDS_MITIGATION_OFF,
+	MDS_MITIGATION_FULL,
+	MDS_MITIGATION_VMWERV,
+};
+
 #endif /* _ASM_X86_PROCESSOR_H */
diff --git a/arch/x86/include/asm/spec-ctrl.h b/arch/x86/include/asm/spec-ctrl.h
index ae7c2c5cd7f0..5393babc0598 100644
--- a/arch/x86/include/asm/spec-ctrl.h
+++ b/arch/x86/include/asm/spec-ctrl.h
@@ -53,12 +53,24 @@ static inline u64 ssbd_tif_to_spec_ctrl(u64 tifn)
 	return (tifn & _TIF_SSBD) >> (TIF_SSBD - SPEC_CTRL_SSBD_SHIFT);
 }
 
+static inline u64 stibp_tif_to_spec_ctrl(u64 tifn)
+{
+	BUILD_BUG_ON(TIF_SPEC_IB < SPEC_CTRL_STIBP_SHIFT);
+	return (tifn & _TIF_SPEC_IB) >> (TIF_SPEC_IB - SPEC_CTRL_STIBP_SHIFT);
+}
+
 static inline unsigned long ssbd_spec_ctrl_to_tif(u64 spec_ctrl)
 {
 	BUILD_BUG_ON(TIF_SSBD < SPEC_CTRL_SSBD_SHIFT);
 	return (spec_ctrl & SPEC_CTRL_SSBD) << (TIF_SSBD - SPEC_CTRL_SSBD_SHIFT);
 }
 
+static inline unsigned long stibp_spec_ctrl_to_tif(u64 spec_ctrl)
+{
+	BUILD_BUG_ON(TIF_SPEC_IB < SPEC_CTRL_STIBP_SHIFT);
+	return (spec_ctrl & SPEC_CTRL_STIBP) << (TIF_SPEC_IB - SPEC_CTRL_STIBP_SHIFT);
+}
+
 static inline u64 ssbd_tif_to_amd_ls_cfg(u64 tifn)
 {
 	return (tifn & _TIF_SSBD) ? x86_amd_ls_cfg_ssbd_mask : 0ULL;
@@ -70,11 +82,7 @@ extern void speculative_store_bypass_ht_init(void);
 static inline void speculative_store_bypass_ht_init(void) { }
 #endif
 
-extern void speculative_store_bypass_update(unsigned long tif);
-
-static inline void speculative_store_bypass_update_current(void)
-{
-	speculative_store_bypass_update(current_thread_info()->flags);
-}
+extern void speculation_ctrl_update(unsigned long tif);
+extern void speculation_ctrl_update_current(void);
 
 #endif
diff --git a/arch/x86/include/asm/switch_to.h b/arch/x86/include/asm/switch_to.h
index 5cb436acd463..676e84f521ba 100644
--- a/arch/x86/include/asm/switch_to.h
+++ b/arch/x86/include/asm/switch_to.h
@@ -8,9 +8,6 @@ struct task_struct *__switch_to_asm(struct task_struct *prev,
 
 __visible struct task_struct *__switch_to(struct task_struct *prev,
 					  struct task_struct *next);
-struct tss_struct;
-void __switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p,
-		      struct tss_struct *tss);
 
 /* This runs runs on the previous thread's stack. */
 static inline void prepare_switch_to(struct task_struct *prev,
diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h
index 2d8788a59b4d..0438f7fbb383 100644
--- a/arch/x86/include/asm/thread_info.h
+++ b/arch/x86/include/asm/thread_info.h
@@ -83,10 +83,12 @@ struct thread_info {
 #define TIF_SIGPENDING		2	/* signal pending */
 #define TIF_NEED_RESCHED	3	/* rescheduling necessary */
 #define TIF_SINGLESTEP		4	/* reenable singlestep on user return*/
-#define TIF_SSBD		5	/* Reduced data speculation */
+#define TIF_SSBD		5	/* Speculative store bypass disable */
 #define TIF_SYSCALL_EMU		6	/* syscall emulation active */
 #define TIF_SYSCALL_AUDIT	7	/* syscall auditing active */
 #define TIF_SECCOMP		8	/* secure computing */
+#define TIF_SPEC_IB		9	/* Indirect branch speculation mitigation */
+#define TIF_SPEC_FORCE_UPDATE	10	/* Force speculation MSR update in context switch */
 #define TIF_USER_RETURN_NOTIFY	11	/* notify kernel of userspace return */
 #define TIF_UPROBE		12	/* breakpointed or singlestepping */
 #define TIF_NOTSC		16	/* TSC is not accessible in userland */
@@ -111,6 +113,8 @@ struct thread_info {
 #define _TIF_SYSCALL_EMU	(1 << TIF_SYSCALL_EMU)
 #define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
 #define _TIF_SECCOMP		(1 << TIF_SECCOMP)
+#define _TIF_SPEC_IB		(1 << TIF_SPEC_IB)
+#define _TIF_SPEC_FORCE_UPDATE	(1 << TIF_SPEC_FORCE_UPDATE)
 #define _TIF_USER_RETURN_NOTIFY	(1 << TIF_USER_RETURN_NOTIFY)
 #define _TIF_UPROBE		(1 << TIF_UPROBE)
 #define _TIF_NOTSC		(1 << TIF_NOTSC)
@@ -140,8 +144,18 @@ struct thread_info {
 	_TIF_NOHZ)
 
 /* flags to check in __switch_to() */
-#define _TIF_WORK_CTXSW							\
-	(_TIF_IO_BITMAP|_TIF_NOTSC|_TIF_BLOCKSTEP|_TIF_SSBD)
+#define _TIF_WORK_CTXSW_BASE						\
+	(_TIF_IO_BITMAP|_TIF_NOTSC|_TIF_BLOCKSTEP|			\
+	 _TIF_SSBD | _TIF_SPEC_FORCE_UPDATE)
+
+/*
+ * Avoid calls to __switch_to_xtra() on UP as STIBP is not evaluated.
+ */
+#ifdef CONFIG_SMP
+# define _TIF_WORK_CTXSW	(_TIF_WORK_CTXSW_BASE | _TIF_SPEC_IB)
+#else
+# define _TIF_WORK_CTXSW	(_TIF_WORK_CTXSW_BASE)
+#endif
 
 #define _TIF_WORK_CTXSW_PREV (_TIF_WORK_CTXSW|_TIF_USER_RETURN_NOTIFY)
 #define _TIF_WORK_CTXSW_NEXT (_TIF_WORK_CTXSW)
diff --git a/arch/x86/include/asm/tlbflush.h b/arch/x86/include/asm/tlbflush.h
index 686a58d793e5..f5ca15622dc9 100644
--- a/arch/x86/include/asm/tlbflush.h
+++ b/arch/x86/include/asm/tlbflush.h
@@ -68,8 +68,12 @@ static inline void invpcid_flush_all_nonglobals(void)
 struct tlb_state {
 	struct mm_struct *active_mm;
 	int state;
-	/* last user mm's ctx id */
-	u64 last_ctx_id;
+
+	/* Last user mm for optimizing IBPB */
+	union {
+		struct mm_struct	*last_user_mm;
+		unsigned long		last_user_mm_ibpb;
+	};
 
 	/*
 	 * Access to this CR4 shadow and to H/W CR4 is protected by
diff --git a/arch/x86/include/uapi/asm/Kbuild b/arch/x86/include/uapi/asm/Kbuild
index 3dec769cadf7..1c532b3f18ea 100644
--- a/arch/x86/include/uapi/asm/Kbuild
+++ b/arch/x86/include/uapi/asm/Kbuild
@@ -27,7 +27,6 @@ header-y += ldt.h
 header-y += mce.h
 header-y += mman.h
 header-y += msgbuf.h
-header-y += msr-index.h
 header-y += msr.h
 header-y += mtrr.h
 header-y += param.h
diff --git a/arch/x86/include/uapi/asm/mce.h b/arch/x86/include/uapi/asm/mce.h
index 69a6e07e3149..db7dae58745f 100644
--- a/arch/x86/include/uapi/asm/mce.h
+++ b/arch/x86/include/uapi/asm/mce.h
@@ -28,6 +28,8 @@ struct mce {
 	__u64 mcgcap;	/* MCGCAP MSR: machine check capabilities of CPU */
 	__u64 synd;	/* MCA_SYND MSR: only valid on SMCA systems */
 	__u64 ipid;	/* MCA_IPID MSR: only valid on SMCA systems */
+	__u64 ppin;	/* Protected Processor Inventory Number */
+	__u32 microcode;/* Microcode revision */
 };
 
 #define MCE_GET_RECORD_LEN   _IOR('M', 1, int)
diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c
index 6221166e3fca..16970c39baea 100644
--- a/arch/x86/kernel/cpu/bugs.c
+++ b/arch/x86/kernel/cpu/bugs.c
@@ -13,6 +13,7 @@
 #include <linux/module.h>
 #include <linux/nospec.h>
 #include <linux/prctl.h>
+#include <linux/sched/smt.h>
 
 #include <asm/spec-ctrl.h>
 #include <asm/cmdline.h>
@@ -24,6 +25,7 @@
 #include <asm/vmx.h>
 #include <asm/paravirt.h>
 #include <asm/alternative.h>
+#include <asm/hypervisor.h>
 #include <asm/pgtable.h>
 #include <asm/cacheflush.h>
 #include <asm/intel-family.h>
@@ -32,13 +34,12 @@
 static void __init spectre_v2_select_mitigation(void);
 static void __init ssb_select_mitigation(void);
 static void __init l1tf_select_mitigation(void);
+static void __init mds_select_mitigation(void);
 
-/*
- * Our boot-time value of the SPEC_CTRL MSR. We read it once so that any
- * writes to SPEC_CTRL contain whatever reserved bits have been set.
- */
-u64 __ro_after_init x86_spec_ctrl_base;
+/* The base value of the SPEC_CTRL MSR that always has to be preserved. */
+u64 x86_spec_ctrl_base;
 EXPORT_SYMBOL_GPL(x86_spec_ctrl_base);
+static DEFINE_MUTEX(spec_ctrl_mutex);
 
 /*
  * The vendor and possibly platform specific bits which can be modified in
@@ -53,6 +54,20 @@ static u64 __ro_after_init x86_spec_ctrl_mask = SPEC_CTRL_IBRS;
 u64 __ro_after_init x86_amd_ls_cfg_base;
 u64 __ro_after_init x86_amd_ls_cfg_ssbd_mask;
 
+/* Control conditional STIPB in switch_to() */
+DEFINE_STATIC_KEY_FALSE(switch_to_cond_stibp);
+/* Control conditional IBPB in switch_mm() */
+DEFINE_STATIC_KEY_FALSE(switch_mm_cond_ibpb);
+/* Control unconditional IBPB in switch_mm() */
+DEFINE_STATIC_KEY_FALSE(switch_mm_always_ibpb);
+
+/* Control MDS CPU buffer clear before returning to user space */
+DEFINE_STATIC_KEY_FALSE(mds_user_clear);
+EXPORT_SYMBOL_GPL(mds_user_clear);
+/* Control MDS CPU buffer clear before idling (halt, mwait) */
+DEFINE_STATIC_KEY_FALSE(mds_idle_clear);
+EXPORT_SYMBOL_GPL(mds_idle_clear);
+
 void __init check_bugs(void)
 {
 	identify_boot_cpu();
@@ -91,6 +106,10 @@ void __init check_bugs(void)
 
 	l1tf_select_mitigation();
 
+	mds_select_mitigation();
+
+	arch_smt_update();
+
 #ifdef CONFIG_X86_32
 	/*
 	 * Check whether we are able to run this kernel safely on SMP.
@@ -123,31 +142,6 @@ void __init check_bugs(void)
 #endif
 }
 
-/* The kernel command line selection */
-enum spectre_v2_mitigation_cmd {
-	SPECTRE_V2_CMD_NONE,
-	SPECTRE_V2_CMD_AUTO,
-	SPECTRE_V2_CMD_FORCE,
-	SPECTRE_V2_CMD_RETPOLINE,
-	SPECTRE_V2_CMD_RETPOLINE_GENERIC,
-	SPECTRE_V2_CMD_RETPOLINE_AMD,
-};
-
-static const char *spectre_v2_strings[] = {
-	[SPECTRE_V2_NONE]			= "Vulnerable",
-	[SPECTRE_V2_RETPOLINE_MINIMAL]		= "Vulnerable: Minimal generic ASM retpoline",
-	[SPECTRE_V2_RETPOLINE_MINIMAL_AMD]	= "Vulnerable: Minimal AMD ASM retpoline",
-	[SPECTRE_V2_RETPOLINE_GENERIC]		= "Mitigation: Full generic retpoline",
-	[SPECTRE_V2_RETPOLINE_AMD]		= "Mitigation: Full AMD retpoline",
-	[SPECTRE_V2_IBRS_ENHANCED]		= "Mitigation: Enhanced IBRS",
-};
-
-#undef pr_fmt
-#define pr_fmt(fmt)     "Spectre V2 : " fmt
-
-static enum spectre_v2_mitigation spectre_v2_enabled __ro_after_init =
-	SPECTRE_V2_NONE;
-
 void
 x86_virt_spec_ctrl(u64 guest_spec_ctrl, u64 guest_virt_spec_ctrl, bool setguest)
 {
@@ -165,9 +159,14 @@ x86_virt_spec_ctrl(u64 guest_spec_ctrl, u64 guest_virt_spec_ctrl, bool setguest)
 		guestval |= guest_spec_ctrl & x86_spec_ctrl_mask;
 
 		/* SSBD controlled in MSR_SPEC_CTRL */
-		if (static_cpu_has(X86_FEATURE_SPEC_CTRL_SSBD))
+		if (static_cpu_has(X86_FEATURE_SPEC_CTRL_SSBD) ||
+		    static_cpu_has(X86_FEATURE_AMD_SSBD))
 			hostval |= ssbd_tif_to_spec_ctrl(ti->flags);
 
+		/* Conditional STIBP enabled? */
+		if (static_branch_unlikely(&switch_to_cond_stibp))
+			hostval |= stibp_tif_to_spec_ctrl(ti->flags);
+
 		if (hostval != guestval) {
 			msrval = setguest ? guestval : hostval;
 			wrmsrl(MSR_IA32_SPEC_CTRL, msrval);
@@ -201,7 +200,7 @@ x86_virt_spec_ctrl(u64 guest_spec_ctrl, u64 guest_virt_spec_ctrl, bool setguest)
 		tif = setguest ? ssbd_spec_ctrl_to_tif(guestval) :
 				 ssbd_spec_ctrl_to_tif(hostval);
 
-		speculative_store_bypass_update(tif);
+		speculation_ctrl_update(tif);
 	}
 }
 EXPORT_SYMBOL_GPL(x86_virt_spec_ctrl);
@@ -216,6 +215,70 @@ static void x86_amd_ssb_disable(void)
 		wrmsrl(MSR_AMD64_LS_CFG, msrval);
 }
 
+#undef pr_fmt
+#define pr_fmt(fmt)	"MDS: " fmt
+
+/* Default mitigation for MDS-affected CPUs */
+static enum mds_mitigations mds_mitigation __ro_after_init = MDS_MITIGATION_FULL;
+static bool mds_nosmt __ro_after_init = false;
+
+static const char * const mds_strings[] = {
+	[MDS_MITIGATION_OFF]	= "Vulnerable",
+	[MDS_MITIGATION_FULL]	= "Mitigation: Clear CPU buffers",
+	[MDS_MITIGATION_VMWERV]	= "Vulnerable: Clear CPU buffers attempted, no microcode",
+};
+
+static void __init mds_select_mitigation(void)
+{
+	if (!boot_cpu_has_bug(X86_BUG_MDS) || cpu_mitigations_off()) {
+		mds_mitigation = MDS_MITIGATION_OFF;
+		return;
+	}
+
+	if (mds_mitigation == MDS_MITIGATION_FULL) {
+		if (!boot_cpu_has(X86_FEATURE_MD_CLEAR))
+			mds_mitigation = MDS_MITIGATION_VMWERV;
+
+		static_branch_enable(&mds_user_clear);
+
+		if (!boot_cpu_has(X86_BUG_MSBDS_ONLY) &&
+		    (mds_nosmt || cpu_mitigations_auto_nosmt()))
+			cpu_smt_disable(false);
+	}
+
+	pr_info("%s\n", mds_strings[mds_mitigation]);
+}
+
+static int __init mds_cmdline(char *str)
+{
+	if (!boot_cpu_has_bug(X86_BUG_MDS))
+		return 0;
+
+	if (!str)
+		return -EINVAL;
+
+	if (!strcmp(str, "off"))
+		mds_mitigation = MDS_MITIGATION_OFF;
+	else if (!strcmp(str, "full"))
+		mds_mitigation = MDS_MITIGATION_FULL;
+	else if (!strcmp(str, "full,nosmt")) {
+		mds_mitigation = MDS_MITIGATION_FULL;
+		mds_nosmt = true;
+	}
+
+	return 0;
+}
+early_param("mds", mds_cmdline);
+
+#undef pr_fmt
+#define pr_fmt(fmt)     "Spectre V2 : " fmt
+
+static enum spectre_v2_mitigation spectre_v2_enabled __ro_after_init =
+	SPECTRE_V2_NONE;
+
+static enum spectre_v2_user_mitigation spectre_v2_user __ro_after_init =
+	SPECTRE_V2_USER_NONE;
+
 #ifdef RETPOLINE
 static bool spectre_v2_bad_module;
 
@@ -237,67 +300,225 @@ static inline const char *spectre_v2_module_string(void)
 static inline const char *spectre_v2_module_string(void) { return ""; }
 #endif
 
-static void __init spec2_print_if_insecure(const char *reason)
+static inline bool match_option(const char *arg, int arglen, const char *opt)
 {
-	if (boot_cpu_has_bug(X86_BUG_SPECTRE_V2))
-		pr_info("%s selected on command line.\n", reason);
+	int len = strlen(opt);
+
+	return len == arglen && !strncmp(arg, opt, len);
 }
 
-static void __init spec2_print_if_secure(const char *reason)
+/* The kernel command line selection for spectre v2 */
+enum spectre_v2_mitigation_cmd {
+	SPECTRE_V2_CMD_NONE,
+	SPECTRE_V2_CMD_AUTO,
+	SPECTRE_V2_CMD_FORCE,
+	SPECTRE_V2_CMD_RETPOLINE,
+	SPECTRE_V2_CMD_RETPOLINE_GENERIC,
+	SPECTRE_V2_CMD_RETPOLINE_AMD,
+};
+
+enum spectre_v2_user_cmd {
+	SPECTRE_V2_USER_CMD_NONE,
+	SPECTRE_V2_USER_CMD_AUTO,
+	SPECTRE_V2_USER_CMD_FORCE,
+	SPECTRE_V2_USER_CMD_PRCTL,
+	SPECTRE_V2_USER_CMD_PRCTL_IBPB,
+	SPECTRE_V2_USER_CMD_SECCOMP,
+	SPECTRE_V2_USER_CMD_SECCOMP_IBPB,
+};
+
+static const char * const spectre_v2_user_strings[] = {
+	[SPECTRE_V2_USER_NONE]		= "User space: Vulnerable",
+	[SPECTRE_V2_USER_STRICT]	= "User space: Mitigation: STIBP protection",
+	[SPECTRE_V2_USER_PRCTL]		= "User space: Mitigation: STIBP via prctl",
+	[SPECTRE_V2_USER_SECCOMP]	= "User space: Mitigation: STIBP via seccomp and prctl",
+};
+
+static const struct {
+	const char			*option;
+	enum spectre_v2_user_cmd	cmd;
+	bool				secure;
+} v2_user_options[] __initconst = {
+	{ "auto",		SPECTRE_V2_USER_CMD_AUTO,		false },
+	{ "off",		SPECTRE_V2_USER_CMD_NONE,		false },
+	{ "on",			SPECTRE_V2_USER_CMD_FORCE,		true  },
+	{ "prctl",		SPECTRE_V2_USER_CMD_PRCTL,		false },
+	{ "prctl,ibpb",		SPECTRE_V2_USER_CMD_PRCTL_IBPB,		false },
+	{ "seccomp",		SPECTRE_V2_USER_CMD_SECCOMP,		false },
+	{ "seccomp,ibpb",	SPECTRE_V2_USER_CMD_SECCOMP_IBPB,	false },
+};
+
+static void __init spec_v2_user_print_cond(const char *reason, bool secure)
 {
-	if (!boot_cpu_has_bug(X86_BUG_SPECTRE_V2))
-		pr_info("%s selected on command line.\n", reason);
+	if (boot_cpu_has_bug(X86_BUG_SPECTRE_V2) != secure)
+		pr_info("spectre_v2_user=%s forced on command line.\n", reason);
 }
 
-static inline bool retp_compiler(void)
+static enum spectre_v2_user_cmd __init
+spectre_v2_parse_user_cmdline(enum spectre_v2_mitigation_cmd v2_cmd)
 {
-	return __is_defined(RETPOLINE);
+	char arg[20];
+	int ret, i;
+
+	switch (v2_cmd) {
+	case SPECTRE_V2_CMD_NONE:
+		return SPECTRE_V2_USER_CMD_NONE;
+	case SPECTRE_V2_CMD_FORCE:
+		return SPECTRE_V2_USER_CMD_FORCE;
+	default:
+		break;
+	}
+
+	ret = cmdline_find_option(boot_command_line, "spectre_v2_user",
+				  arg, sizeof(arg));
+	if (ret < 0)
+		return SPECTRE_V2_USER_CMD_AUTO;
+
+	for (i = 0; i < ARRAY_SIZE(v2_user_options); i++) {
+		if (match_option(arg, ret, v2_user_options[i].option)) {
+			spec_v2_user_print_cond(v2_user_options[i].option,
+						v2_user_options[i].secure);
+			return v2_user_options[i].cmd;
+		}
+	}
+
+	pr_err("Unknown user space protection option (%s). Switching to AUTO select\n", arg);
+	return SPECTRE_V2_USER_CMD_AUTO;
 }
 
-static inline bool match_option(const char *arg, int arglen, const char *opt)
+static void __init
+spectre_v2_user_select_mitigation(enum spectre_v2_mitigation_cmd v2_cmd)
 {
-	int len = strlen(opt);
+	enum spectre_v2_user_mitigation mode = SPECTRE_V2_USER_NONE;
+	bool smt_possible = IS_ENABLED(CONFIG_SMP);
+	enum spectre_v2_user_cmd cmd;
 
-	return len == arglen && !strncmp(arg, opt, len);
+	if (!boot_cpu_has(X86_FEATURE_IBPB) && !boot_cpu_has(X86_FEATURE_STIBP))
+		return;
+
+	if (cpu_smt_control == CPU_SMT_FORCE_DISABLED ||
+	    cpu_smt_control == CPU_SMT_NOT_SUPPORTED)
+		smt_possible = false;
+
+	cmd = spectre_v2_parse_user_cmdline(v2_cmd);
+	switch (cmd) {
+	case SPECTRE_V2_USER_CMD_NONE:
+		goto set_mode;
+	case SPECTRE_V2_USER_CMD_FORCE:
+		mode = SPECTRE_V2_USER_STRICT;
+		break;
+	case SPECTRE_V2_USER_CMD_PRCTL:
+	case SPECTRE_V2_USER_CMD_PRCTL_IBPB:
+		mode = SPECTRE_V2_USER_PRCTL;
+		break;
+	case SPECTRE_V2_USER_CMD_AUTO:
+	case SPECTRE_V2_USER_CMD_SECCOMP:
+	case SPECTRE_V2_USER_CMD_SECCOMP_IBPB:
+		if (IS_ENABLED(CONFIG_SECCOMP))
+			mode = SPECTRE_V2_USER_SECCOMP;
+		else
+			mode = SPECTRE_V2_USER_PRCTL;
+		break;
+	}
+
+	/* Initialize Indirect Branch Prediction Barrier */
+	if (boot_cpu_has(X86_FEATURE_IBPB)) {
+		setup_force_cpu_cap(X86_FEATURE_USE_IBPB);
+
+		switch (cmd) {
+		case SPECTRE_V2_USER_CMD_FORCE:
+		case SPECTRE_V2_USER_CMD_PRCTL_IBPB:
+		case SPECTRE_V2_USER_CMD_SECCOMP_IBPB:
+			static_branch_enable(&switch_mm_always_ibpb);
+			break;
+		case SPECTRE_V2_USER_CMD_PRCTL:
+		case SPECTRE_V2_USER_CMD_AUTO:
+		case SPECTRE_V2_USER_CMD_SECCOMP:
+			static_branch_enable(&switch_mm_cond_ibpb);
+			break;
+		default:
+			break;
+		}
+
+		pr_info("mitigation: Enabling %s Indirect Branch Prediction Barrier\n",
+			static_key_enabled(&switch_mm_always_ibpb) ?
+			"always-on" : "conditional");
+	}
+
+	/* If enhanced IBRS is enabled no STIPB required */
+	if (spectre_v2_enabled == SPECTRE_V2_IBRS_ENHANCED)
+		return;
+
+	/*
+	 * If SMT is not possible or STIBP is not available clear the STIPB
+	 * mode.
+	 */
+	if (!smt_possible || !boot_cpu_has(X86_FEATURE_STIBP))
+		mode = SPECTRE_V2_USER_NONE;
+set_mode:
+	spectre_v2_user = mode;
+	/* Only print the STIBP mode when SMT possible */
+	if (smt_possible)
+		pr_info("%s\n", spectre_v2_user_strings[mode]);
 }
 
+static const char * const spectre_v2_strings[] = {
+	[SPECTRE_V2_NONE]			= "Vulnerable",
+	[SPECTRE_V2_RETPOLINE_MINIMAL]		= "Vulnerable: Minimal generic ASM retpoline",
+	[SPECTRE_V2_RETPOLINE_MINIMAL_AMD]	= "Vulnerable: Minimal AMD ASM retpoline",
+	[SPECTRE_V2_RETPOLINE_GENERIC]		= "Mitigation: Full generic retpoline",
+	[SPECTRE_V2_RETPOLINE_AMD]		= "Mitigation: Full AMD retpoline",
+	[SPECTRE_V2_IBRS_ENHANCED]		= "Mitigation: Enhanced IBRS",
+};
+
 static const struct {
 	const char *option;
 	enum spectre_v2_mitigation_cmd cmd;
 	bool secure;
-} mitigation_options[] = {
-	{ "off",               SPECTRE_V2_CMD_NONE,              false },
-	{ "on",                SPECTRE_V2_CMD_FORCE,             true },
-	{ "retpoline",         SPECTRE_V2_CMD_RETPOLINE,         false },
-	{ "retpoline,amd",     SPECTRE_V2_CMD_RETPOLINE_AMD,     false },
-	{ "retpoline,generic", SPECTRE_V2_CMD_RETPOLINE_GENERIC, false },
-	{ "auto",              SPECTRE_V2_CMD_AUTO,              false },
+} mitigation_options[] __initconst = {
+	{ "off",		SPECTRE_V2_CMD_NONE,		  false },
+	{ "on",			SPECTRE_V2_CMD_FORCE,		  true  },
+	{ "retpoline",		SPECTRE_V2_CMD_RETPOLINE,	  false },
+	{ "retpoline,amd",	SPECTRE_V2_CMD_RETPOLINE_AMD,	  false },
+	{ "retpoline,generic",	SPECTRE_V2_CMD_RETPOLINE_GENERIC, false },
+	{ "auto",		SPECTRE_V2_CMD_AUTO,		  false },
 };
 
+static void __init spec_v2_print_cond(const char *reason, bool secure)
+{
+	if (boot_cpu_has_bug(X86_BUG_SPECTRE_V2) != secure)
+		pr_info("%s selected on command line.\n", reason);
+}
+
+static inline bool retp_compiler(void)
+{
+	return __is_defined(RETPOLINE);
+}
+
 static enum spectre_v2_mitigation_cmd __init spectre_v2_parse_cmdline(void)
 {
+	enum spectre_v2_mitigation_cmd cmd = SPECTRE_V2_CMD_AUTO;
 	char arg[20];
 	int ret, i;
-	enum spectre_v2_mitigation_cmd cmd = SPECTRE_V2_CMD_AUTO;
 
-	if (cmdline_find_option_bool(boot_command_line, "nospectre_v2"))
+	if (cmdline_find_option_bool(boot_command_line, "nospectre_v2") ||
+	    cpu_mitigations_off())
 		return SPECTRE_V2_CMD_NONE;
-	else {
-		ret = cmdline_find_option(boot_command_line, "spectre_v2", arg, sizeof(arg));
-		if (ret < 0)
-			return SPECTRE_V2_CMD_AUTO;
 
-		for (i = 0; i < ARRAY_SIZE(mitigation_options); i++) {
-			if (!match_option(arg, ret, mitigation_options[i].option))
-				continue;
-			cmd = mitigation_options[i].cmd;
-			break;
-		}
+	ret = cmdline_find_option(boot_command_line, "spectre_v2", arg, sizeof(arg));
+	if (ret < 0)
+		return SPECTRE_V2_CMD_AUTO;
 
-		if (i >= ARRAY_SIZE(mitigation_options)) {
-			pr_err("unknown option (%s). Switching to AUTO select\n", arg);
-			return SPECTRE_V2_CMD_AUTO;
-		}
+	for (i = 0; i < ARRAY_SIZE(mitigation_options); i++) {
+		if (!match_option(arg, ret, mitigation_options[i].option))
+			continue;
+		cmd = mitigation_options[i].cmd;
+		break;
+	}
+
+	if (i >= ARRAY_SIZE(mitigation_options)) {
+		pr_err("unknown option (%s). Switching to AUTO select\n", arg);
+		return SPECTRE_V2_CMD_AUTO;
 	}
 
 	if ((cmd == SPECTRE_V2_CMD_RETPOLINE ||
@@ -314,11 +535,8 @@ static enum spectre_v2_mitigation_cmd __init spectre_v2_parse_cmdline(void)
 		return SPECTRE_V2_CMD_AUTO;
 	}
 
-	if (mitigation_options[i].secure)
-		spec2_print_if_secure(mitigation_options[i].option);
-	else
-		spec2_print_if_insecure(mitigation_options[i].option);
-
+	spec_v2_print_cond(mitigation_options[i].option,
+			   mitigation_options[i].secure);
 	return cmd;
 }
 
@@ -400,12 +618,6 @@ specv2_set_mode:
 	setup_force_cpu_cap(X86_FEATURE_RSB_CTXSW);
 	pr_info("Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch\n");
 
-	/* Initialize Indirect Branch Prediction Barrier if supported */
-	if (boot_cpu_has(X86_FEATURE_IBPB)) {
-		setup_force_cpu_cap(X86_FEATURE_USE_IBPB);
-		pr_info("Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier\n");
-	}
-
 	/*
 	 * Retpoline means the kernel is safe because it has no indirect
 	 * branches. Enhanced IBRS protects firmware too, so, enable restricted
@@ -421,6 +633,99 @@ specv2_set_mode:
 		setup_force_cpu_cap(X86_FEATURE_USE_IBRS_FW);
 		pr_info("Enabling Restricted Speculation for firmware calls\n");
 	}
+
+	/* Set up IBPB and STIBP depending on the general spectre V2 command */
+	spectre_v2_user_select_mitigation(cmd);
+}
+
+static void update_stibp_msr(void * __unused)
+{
+	wrmsrl(MSR_IA32_SPEC_CTRL, x86_spec_ctrl_base);
+}
+
+/* Update x86_spec_ctrl_base in case SMT state changed. */
+static void update_stibp_strict(void)
+{
+	u64 mask = x86_spec_ctrl_base & ~SPEC_CTRL_STIBP;
+
+	if (sched_smt_active())
+		mask |= SPEC_CTRL_STIBP;
+
+	if (mask == x86_spec_ctrl_base)
+		return;
+
+	pr_info("Update user space SMT mitigation: STIBP %s\n",
+		mask & SPEC_CTRL_STIBP ? "always-on" : "off");
+	x86_spec_ctrl_base = mask;
+	on_each_cpu(update_stibp_msr, NULL, 1);
+}
+
+/* Update the static key controlling the evaluation of TIF_SPEC_IB */
+static void update_indir_branch_cond(void)
+{
+	if (sched_smt_active())
+		static_branch_enable(&switch_to_cond_stibp);
+	else
+		static_branch_disable(&switch_to_cond_stibp);
+}
+
+#undef pr_fmt
+#define pr_fmt(fmt) fmt
+
+/* Update the static key controlling the MDS CPU buffer clear in idle */
+static void update_mds_branch_idle(void)
+{
+	/*
+	 * Enable the idle clearing if SMT is active on CPUs which are
+	 * affected only by MSBDS and not any other MDS variant.
+	 *
+	 * The other variants cannot be mitigated when SMT is enabled, so
+	 * clearing the buffers on idle just to prevent the Store Buffer
+	 * repartitioning leak would be a window dressing exercise.
+	 */
+	if (!boot_cpu_has_bug(X86_BUG_MSBDS_ONLY))
+		return;
+
+	if (sched_smt_active())
+		static_branch_enable(&mds_idle_clear);
+	else
+		static_branch_disable(&mds_idle_clear);
+}
+
+#define MDS_MSG_SMT "MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.\n"
+
+void arch_smt_update(void)
+{
+	/* Enhanced IBRS implies STIBP. No update required. */
+	if (spectre_v2_enabled == SPECTRE_V2_IBRS_ENHANCED)
+		return;
+
+	mutex_lock(&spec_ctrl_mutex);
+
+	switch (spectre_v2_user) {
+	case SPECTRE_V2_USER_NONE:
+		break;
+	case SPECTRE_V2_USER_STRICT:
+		update_stibp_strict();
+		break;
+	case SPECTRE_V2_USER_PRCTL:
+	case SPECTRE_V2_USER_SECCOMP:
+		update_indir_branch_cond();
+		break;
+	}
+
+	switch (mds_mitigation) {
+	case MDS_MITIGATION_FULL:
+	case MDS_MITIGATION_VMWERV:
+		if (sched_smt_active() && !boot_cpu_has(X86_BUG_MSBDS_ONLY))
+			pr_warn_once(MDS_MSG_SMT);
+		update_mds_branch_idle();
+		break;
+	case MDS_MITIGATION_OFF:
+		break;
+	}
+
+	mutex_unlock(&spec_ctrl_mutex);
 }
 
 #undef pr_fmt
@@ -437,7 +742,7 @@ enum ssb_mitigation_cmd {
 	SPEC_STORE_BYPASS_CMD_SECCOMP,
 };
 
-static const char *ssb_strings[] = {
+static const char * const ssb_strings[] = {
 	[SPEC_STORE_BYPASS_NONE]	= "Vulnerable",
 	[SPEC_STORE_BYPASS_DISABLE]	= "Mitigation: Speculative Store Bypass disabled",
 	[SPEC_STORE_BYPASS_PRCTL]	= "Mitigation: Speculative Store Bypass disabled via prctl",
@@ -447,7 +752,7 @@ static const char *ssb_strings[] = {
 static const struct {
 	const char *option;
 	enum ssb_mitigation_cmd cmd;
-} ssb_mitigation_options[] = {
+} ssb_mitigation_options[]  __initconst = {
 	{ "auto",	SPEC_STORE_BYPASS_CMD_AUTO },    /* Platform decides */
 	{ "on",		SPEC_STORE_BYPASS_CMD_ON },      /* Disable Speculative Store Bypass */
 	{ "off",	SPEC_STORE_BYPASS_CMD_NONE },    /* Don't touch Speculative Store Bypass */
@@ -461,7 +766,8 @@ static enum ssb_mitigation_cmd __init ssb_parse_cmdline(void)
 	char arg[20];
 	int ret, i;
 
-	if (cmdline_find_option_bool(boot_command_line, "nospec_store_bypass_disable")) {
+	if (cmdline_find_option_bool(boot_command_line, "nospec_store_bypass_disable") ||
+	    cpu_mitigations_off()) {
 		return SPEC_STORE_BYPASS_CMD_NONE;
 	} else {
 		ret = cmdline_find_option(boot_command_line, "spec_store_bypass_disable",
@@ -531,18 +837,16 @@ static enum ssb_mitigation __init __ssb_select_mitigation(void)
 	if (mode == SPEC_STORE_BYPASS_DISABLE) {
 		setup_force_cpu_cap(X86_FEATURE_SPEC_STORE_BYPASS_DISABLE);
 		/*
-		 * Intel uses the SPEC CTRL MSR Bit(2) for this, while AMD uses
-		 * a completely different MSR and bit dependent on family.
+		 * Intel uses the SPEC CTRL MSR Bit(2) for this, while AMD may
+		 * use a completely different MSR and bit dependent on family.
 		 */
-		switch (boot_cpu_data.x86_vendor) {
-		case X86_VENDOR_INTEL:
+		if (!static_cpu_has(X86_FEATURE_SPEC_CTRL_SSBD) &&
+		    !static_cpu_has(X86_FEATURE_AMD_SSBD)) {
+			x86_amd_ssb_disable();
+		} else {
 			x86_spec_ctrl_base |= SPEC_CTRL_SSBD;
 			x86_spec_ctrl_mask |= SPEC_CTRL_SSBD;
 			wrmsrl(MSR_IA32_SPEC_CTRL, x86_spec_ctrl_base);
-			break;
-		case X86_VENDOR_AMD:
-			x86_amd_ssb_disable();
-			break;
 		}
 	}
 
@@ -560,10 +864,25 @@ static void ssb_select_mitigation(void)
 #undef pr_fmt
 #define pr_fmt(fmt)     "Speculation prctl: " fmt
 
-static int ssb_prctl_set(struct task_struct *task, unsigned long ctrl)
+static void task_update_spec_tif(struct task_struct *tsk)
 {
-	bool update;
+	/* Force the update of the real TIF bits */
+	set_tsk_thread_flag(tsk, TIF_SPEC_FORCE_UPDATE);
 
+	/*
+	 * Immediately update the speculation control MSRs for the current
+	 * task, but for a non-current task delay setting the CPU
+	 * mitigation until it is scheduled next.
+	 *
+	 * This can only happen for SECCOMP mitigation. For PRCTL it's
+	 * always the current task.
+	 */
+	if (tsk == current)
+		speculation_ctrl_update_current();
+}
+
+static int ssb_prctl_set(struct task_struct *task, unsigned long ctrl)
+{
 	if (ssb_mode != SPEC_STORE_BYPASS_PRCTL &&
 	    ssb_mode != SPEC_STORE_BYPASS_SECCOMP)
 		return -ENXIO;
@@ -574,28 +893,56 @@ static int ssb_prctl_set(struct task_struct *task, unsigned long ctrl)
 		if (task_spec_ssb_force_disable(task))
 			return -EPERM;
 		task_clear_spec_ssb_disable(task);
-		update = test_and_clear_tsk_thread_flag(task, TIF_SSBD);
+		task_update_spec_tif(task);
 		break;
 	case PR_SPEC_DISABLE:
 		task_set_spec_ssb_disable(task);
-		update = !test_and_set_tsk_thread_flag(task, TIF_SSBD);
+		task_update_spec_tif(task);
 		break;
 	case PR_SPEC_FORCE_DISABLE:
 		task_set_spec_ssb_disable(task);
 		task_set_spec_ssb_force_disable(task);
-		update = !test_and_set_tsk_thread_flag(task, TIF_SSBD);
+		task_update_spec_tif(task);
 		break;
 	default:
 		return -ERANGE;
 	}
+	return 0;
+}
 
-	/*
-	 * If being set on non-current task, delay setting the CPU
-	 * mitigation until it is next scheduled.
-	 */
-	if (task == current && update)
-		speculative_store_bypass_update_current();
-
+static int ib_prctl_set(struct task_struct *task, unsigned long ctrl)
+{
+	switch (ctrl) {
+	case PR_SPEC_ENABLE:
+		if (spectre_v2_user == SPECTRE_V2_USER_NONE)
+			return 0;
+		/*
+		 * Indirect branch speculation is always disabled in strict
+		 * mode.
+		 */
+		if (spectre_v2_user == SPECTRE_V2_USER_STRICT)
+			return -EPERM;
+		task_clear_spec_ib_disable(task);
+		task_update_spec_tif(task);
+		break;
+	case PR_SPEC_DISABLE:
+	case PR_SPEC_FORCE_DISABLE:
+		/*
+		 * Indirect branch speculation is always allowed when
+		 * mitigation is force disabled.
+		 */
+		if (spectre_v2_user == SPECTRE_V2_USER_NONE)
+			return -EPERM;
+		if (spectre_v2_user == SPECTRE_V2_USER_STRICT)
+			return 0;
+		task_set_spec_ib_disable(task);
+		if (ctrl == PR_SPEC_FORCE_DISABLE)
+			task_set_spec_ib_force_disable(task);
+		task_update_spec_tif(task);
+		break;
+	default:
+		return -ERANGE;
+	}
 	return 0;
 }
 
@@ -605,6 +952,8 @@ int arch_prctl_spec_ctrl_set(struct task_struct *task, unsigned long which,
 	switch (which) {
 	case PR_SPEC_STORE_BYPASS:
 		return ssb_prctl_set(task, ctrl);
+	case PR_SPEC_INDIRECT_BRANCH:
+		return ib_prctl_set(task, ctrl);
 	default:
 		return -ENODEV;
 	}
@@ -615,6 +964,8 @@ void arch_seccomp_spec_mitigate(struct task_struct *task)
 {
 	if (ssb_mode == SPEC_STORE_BYPASS_SECCOMP)
 		ssb_prctl_set(task, PR_SPEC_FORCE_DISABLE);
+	if (spectre_v2_user == SPECTRE_V2_USER_SECCOMP)
+		ib_prctl_set(task, PR_SPEC_FORCE_DISABLE);
 }
 #endif
 
@@ -637,11 +988,35 @@ static int ssb_prctl_get(struct task_struct *task)
 	}
 }
 
+static int ib_prctl_get(struct task_struct *task)
+{
+	if (!boot_cpu_has_bug(X86_BUG_SPECTRE_V2))
+		return PR_SPEC_NOT_AFFECTED;
+
+	switch (spectre_v2_user) {
+	case SPECTRE_V2_USER_NONE:
+		return PR_SPEC_ENABLE;
+	case SPECTRE_V2_USER_PRCTL:
+	case SPECTRE_V2_USER_SECCOMP:
+		if (task_spec_ib_force_disable(task))
+			return PR_SPEC_PRCTL | PR_SPEC_FORCE_DISABLE;
+		if (task_spec_ib_disable(task))
+			return PR_SPEC_PRCTL | PR_SPEC_DISABLE;
+		return PR_SPEC_PRCTL | PR_SPEC_ENABLE;
+	case SPECTRE_V2_USER_STRICT:
+		return PR_SPEC_DISABLE;
+	default:
+		return PR_SPEC_NOT_AFFECTED;
+	}
+}
+
 int arch_prctl_spec_ctrl_get(struct task_struct *task, unsigned long which)
 {
 	switch (which) {
 	case PR_SPEC_STORE_BYPASS:
 		return ssb_prctl_get(task);
+	case PR_SPEC_INDIRECT_BRANCH:
+		return ib_prctl_get(task);
 	default:
 		return -ENODEV;
 	}
@@ -713,6 +1088,11 @@ static void __init l1tf_select_mitigation(void)
 	if (!boot_cpu_has_bug(X86_BUG_L1TF))
 		return;
 
+	if (cpu_mitigations_off())
+		l1tf_mitigation = L1TF_MITIGATION_OFF;
+	else if (cpu_mitigations_auto_nosmt())
+		l1tf_mitigation = L1TF_MITIGATION_FLUSH_NOSMT;
+
 	override_cache_bits(&boot_cpu_data);
 
 	switch (l1tf_mitigation) {
@@ -735,12 +1115,13 @@ static void __init l1tf_select_mitigation(void)
 #endif
 
 	half_pa = (u64)l1tf_pfn_limit() << PAGE_SHIFT;
-	if (e820_any_mapped(half_pa, ULLONG_MAX - half_pa, E820_RAM)) {
+	if (l1tf_mitigation != L1TF_MITIGATION_OFF &&
+			e820_any_mapped(half_pa, ULLONG_MAX - half_pa, E820_RAM)) {
 		pr_warn("System has more than MAX_PA/2 memory. L1TF mitigation not effective.\n");
 		pr_info("You may make it effective by booting the kernel with mem=%llu parameter.\n",
 				half_pa);
 		pr_info("However, doing so will make a part of your RAM unusable.\n");
-		pr_info("Reading https://www.kernel.org/doc/html/latest/admin-guide/l1tf.html might help you decide.\n");
+		pr_info("Reading https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/l1tf.html might help you decide.\n");
 		return;
 	}
 
@@ -773,13 +1154,14 @@ static int __init l1tf_cmdline(char *str)
 early_param("l1tf", l1tf_cmdline);
 
 #undef pr_fmt
+#define pr_fmt(fmt) fmt
 
 #ifdef CONFIG_SYSFS
 
 #define L1TF_DEFAULT_MSG "Mitigation: PTE Inversion"
 
 #if IS_ENABLED(CONFIG_KVM_INTEL)
-static const char *l1tf_vmx_states[] = {
+static const char * const l1tf_vmx_states[] = {
 	[VMENTER_L1D_FLUSH_AUTO]		= "auto",
 	[VMENTER_L1D_FLUSH_NEVER]		= "vulnerable",
 	[VMENTER_L1D_FLUSH_COND]		= "conditional cache flushes",
@@ -795,13 +1177,14 @@ static ssize_t l1tf_show_state(char *buf)
 
 	if (l1tf_vmx_mitigation == VMENTER_L1D_FLUSH_EPT_DISABLED ||
 	    (l1tf_vmx_mitigation == VMENTER_L1D_FLUSH_NEVER &&
-	     cpu_smt_control == CPU_SMT_ENABLED))
+	     sched_smt_active())) {
 		return sprintf(buf, "%s; VMX: %s\n", L1TF_DEFAULT_MSG,
 			       l1tf_vmx_states[l1tf_vmx_mitigation]);
+	}
 
 	return sprintf(buf, "%s; VMX: %s, SMT %s\n", L1TF_DEFAULT_MSG,
 		       l1tf_vmx_states[l1tf_vmx_mitigation],
-		       cpu_smt_control == CPU_SMT_ENABLED ? "vulnerable" : "disabled");
+		       sched_smt_active() ? "vulnerable" : "disabled");
 }
 #else
 static ssize_t l1tf_show_state(char *buf)
@@ -810,6 +1193,55 @@ static ssize_t l1tf_show_state(char *buf)
 }
 #endif
 
+static ssize_t mds_show_state(char *buf)
+{
+#ifdef CONFIG_HYPERVISOR_GUEST
+	if (x86_hyper) {
+		return sprintf(buf, "%s; SMT Host state unknown\n",
+			       mds_strings[mds_mitigation]);
+	}
+#endif
+
+	if (boot_cpu_has(X86_BUG_MSBDS_ONLY)) {
+		return sprintf(buf, "%s; SMT %s\n", mds_strings[mds_mitigation],
+			       (mds_mitigation == MDS_MITIGATION_OFF ? "vulnerable" :
+			        sched_smt_active() ? "mitigated" : "disabled"));
+	}
+
+	return sprintf(buf, "%s; SMT %s\n", mds_strings[mds_mitigation],
+		       sched_smt_active() ? "vulnerable" : "disabled");
+}
+
+static char *stibp_state(void)
+{
+	if (spectre_v2_enabled == SPECTRE_V2_IBRS_ENHANCED)
+		return "";
+
+	switch (spectre_v2_user) {
+	case SPECTRE_V2_USER_NONE:
+		return ", STIBP: disabled";
+	case SPECTRE_V2_USER_STRICT:
+		return ", STIBP: forced";
+	case SPECTRE_V2_USER_PRCTL:
+	case SPECTRE_V2_USER_SECCOMP:
+		if (static_key_enabled(&switch_to_cond_stibp))
+			return ", STIBP: conditional";
+	}
+	return "";
+}
+
+static char *ibpb_state(void)
+{
+	if (boot_cpu_has(X86_FEATURE_IBPB)) {
+		if (static_key_enabled(&switch_mm_always_ibpb))
+			return ", IBPB: always-on";
+		if (static_key_enabled(&switch_mm_cond_ibpb))
+			return ", IBPB: conditional";
+		return ", IBPB: disabled";
+	}
+	return "";
+}
+
 static ssize_t cpu_show_common(struct device *dev, struct device_attribute *attr,
 			       char *buf, unsigned int bug)
 {
@@ -827,9 +1259,11 @@ static ssize_t cpu_show_common(struct device *dev, struct device_attribute *attr
 		return sprintf(buf, "Mitigation: __user pointer sanitization\n");
 
 	case X86_BUG_SPECTRE_V2:
-		return sprintf(buf, "%s%s%s%s\n", spectre_v2_strings[spectre_v2_enabled],
-			       boot_cpu_has(X86_FEATURE_USE_IBPB) ? ", IBPB" : "",
+		return sprintf(buf, "%s%s%s%s%s%s\n", spectre_v2_strings[spectre_v2_enabled],
+			       ibpb_state(),
 			       boot_cpu_has(X86_FEATURE_USE_IBRS_FW) ? ", IBRS_FW" : "",
+			       stibp_state(),
+			       boot_cpu_has(X86_FEATURE_RSB_CTXSW) ? ", RSB filling" : "",
 			       spectre_v2_module_string());
 
 	case X86_BUG_SPEC_STORE_BYPASS:
@@ -839,6 +1273,10 @@ static ssize_t cpu_show_common(struct device *dev, struct device_attribute *attr
 		if (boot_cpu_has(X86_FEATURE_L1TF_PTEINV))
 			return l1tf_show_state(buf);
 		break;
+
+	case X86_BUG_MDS:
+		return mds_show_state(buf);
+
 	default:
 		break;
 	}
@@ -870,4 +1308,9 @@ ssize_t cpu_show_l1tf(struct device *dev, struct device_attribute *attr, char *b
 {
 	return cpu_show_common(dev, attr, buf, X86_BUG_L1TF);
 }
+
+ssize_t cpu_show_mds(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	return cpu_show_common(dev, attr, buf, X86_BUG_MDS);
+}
 #endif
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 3c01610c5ba9..cda130dc56b9 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -752,6 +752,12 @@ static void init_speculation_control(struct cpuinfo_x86 *c)
 		set_cpu_cap(c, X86_FEATURE_STIBP);
 		set_cpu_cap(c, X86_FEATURE_MSR_SPEC_CTRL);
 	}
+
+	if (cpu_has(c, X86_FEATURE_AMD_SSBD)) {
+		set_cpu_cap(c, X86_FEATURE_SSBD);
+		set_cpu_cap(c, X86_FEATURE_MSR_SPEC_CTRL);
+		clear_cpu_cap(c, X86_FEATURE_VIRT_SSBD);
+	}
 }
 
 void get_cpu_cap(struct cpuinfo_x86 *c)
@@ -885,84 +891,95 @@ static void identify_cpu_without_cpuid(struct cpuinfo_x86 *c)
 	c->x86_cache_bits = c->x86_phys_bits;
 }
 
-static const __initconst struct x86_cpu_id cpu_no_speculation[] = {
-	{ X86_VENDOR_INTEL,	6, INTEL_FAM6_ATOM_CEDARVIEW,	X86_FEATURE_ANY },
-	{ X86_VENDOR_INTEL,	6, INTEL_FAM6_ATOM_CLOVERVIEW,	X86_FEATURE_ANY },
-	{ X86_VENDOR_INTEL,	6, INTEL_FAM6_ATOM_LINCROFT,	X86_FEATURE_ANY },
-	{ X86_VENDOR_INTEL,	6, INTEL_FAM6_ATOM_PENWELL,	X86_FEATURE_ANY },
-	{ X86_VENDOR_INTEL,	6, INTEL_FAM6_ATOM_PINEVIEW,	X86_FEATURE_ANY },
-	{ X86_VENDOR_CENTAUR,	5 },
-	{ X86_VENDOR_INTEL,	5 },
-	{ X86_VENDOR_NSC,	5 },
-	{ X86_VENDOR_ANY,	4 },
-	{}
-};
+#define NO_SPECULATION	BIT(0)
+#define NO_MELTDOWN	BIT(1)
+#define NO_SSB		BIT(2)
+#define NO_L1TF		BIT(3)
+#define NO_MDS		BIT(4)
+#define MSBDS_ONLY	BIT(5)
 
-static const __initconst struct x86_cpu_id cpu_no_meltdown[] = {
-	{ X86_VENDOR_AMD },
-	{}
-};
+#define VULNWL(_vendor, _family, _model, _whitelist)	\
+	{ X86_VENDOR_##_vendor, _family, _model, X86_FEATURE_ANY, _whitelist }
 
-static const __initconst struct x86_cpu_id cpu_no_spec_store_bypass[] = {
-	{ X86_VENDOR_INTEL,	6,	INTEL_FAM6_ATOM_PINEVIEW	},
-	{ X86_VENDOR_INTEL,	6,	INTEL_FAM6_ATOM_LINCROFT	},
-	{ X86_VENDOR_INTEL,	6,	INTEL_FAM6_ATOM_PENWELL		},
-	{ X86_VENDOR_INTEL,	6,	INTEL_FAM6_ATOM_CLOVERVIEW	},
-	{ X86_VENDOR_INTEL,	6,	INTEL_FAM6_ATOM_CEDARVIEW	},
-	{ X86_VENDOR_INTEL,	6,	INTEL_FAM6_ATOM_SILVERMONT1	},
-	{ X86_VENDOR_INTEL,	6,	INTEL_FAM6_ATOM_AIRMONT		},
-	{ X86_VENDOR_INTEL,	6,	INTEL_FAM6_ATOM_SILVERMONT2	},
-	{ X86_VENDOR_INTEL,	6,	INTEL_FAM6_ATOM_MERRIFIELD	},
-	{ X86_VENDOR_INTEL,	6,	INTEL_FAM6_CORE_YONAH		},
-	{ X86_VENDOR_INTEL,	6,	INTEL_FAM6_XEON_PHI_KNL		},
-	{ X86_VENDOR_INTEL,	6,	INTEL_FAM6_XEON_PHI_KNM		},
-	{ X86_VENDOR_CENTAUR,	5,					},
-	{ X86_VENDOR_INTEL,	5,					},
-	{ X86_VENDOR_NSC,	5,					},
-	{ X86_VENDOR_AMD,	0x12,					},
-	{ X86_VENDOR_AMD,	0x11,					},
-	{ X86_VENDOR_AMD,	0x10,					},
-	{ X86_VENDOR_AMD,	0xf,					},
-	{ X86_VENDOR_ANY,	4,					},
-	{}
-};
+#define VULNWL_INTEL(model, whitelist)		\
+	VULNWL(INTEL, 6, INTEL_FAM6_##model, whitelist)
+
+#define VULNWL_AMD(family, whitelist)		\
+	VULNWL(AMD, family, X86_MODEL_ANY, whitelist)
+
+static const __initconst struct x86_cpu_id cpu_vuln_whitelist[] = {
+	VULNWL(ANY,	4, X86_MODEL_ANY,	NO_SPECULATION),
+	VULNWL(CENTAUR,	5, X86_MODEL_ANY,	NO_SPECULATION),
+	VULNWL(INTEL,	5, X86_MODEL_ANY,	NO_SPECULATION),
+	VULNWL(NSC,	5, X86_MODEL_ANY,	NO_SPECULATION),
+
+	/* Intel Family 6 */
+	VULNWL_INTEL(ATOM_SALTWELL,		NO_SPECULATION),
+	VULNWL_INTEL(ATOM_SALTWELL_TABLET,	NO_SPECULATION),
+	VULNWL_INTEL(ATOM_SALTWELL_MID,		NO_SPECULATION),
+	VULNWL_INTEL(ATOM_BONNELL,		NO_SPECULATION),
+	VULNWL_INTEL(ATOM_BONNELL_MID,		NO_SPECULATION),
+
+	VULNWL_INTEL(ATOM_SILVERMONT,		NO_SSB | NO_L1TF | MSBDS_ONLY),
+	VULNWL_INTEL(ATOM_SILVERMONT_X,		NO_SSB | NO_L1TF | MSBDS_ONLY),
+	VULNWL_INTEL(ATOM_SILVERMONT_MID,	NO_SSB | NO_L1TF | MSBDS_ONLY),
+	VULNWL_INTEL(ATOM_AIRMONT,		NO_SSB | NO_L1TF | MSBDS_ONLY),
+	VULNWL_INTEL(XEON_PHI_KNL,		NO_SSB | NO_L1TF | MSBDS_ONLY),
+	VULNWL_INTEL(XEON_PHI_KNM,		NO_SSB | NO_L1TF | MSBDS_ONLY),
+
+	VULNWL_INTEL(CORE_YONAH,		NO_SSB),
+
+	VULNWL_INTEL(ATOM_AIRMONT_MID,		NO_L1TF | MSBDS_ONLY),
+
+	VULNWL_INTEL(ATOM_GOLDMONT,		NO_MDS | NO_L1TF),
+	VULNWL_INTEL(ATOM_GOLDMONT_X,		NO_MDS | NO_L1TF),
+	VULNWL_INTEL(ATOM_GOLDMONT_PLUS,	NO_MDS | NO_L1TF),
 
-static const __initconst struct x86_cpu_id cpu_no_l1tf[] = {
-	/* in addition to cpu_no_speculation */
-	{ X86_VENDOR_INTEL,	6,	INTEL_FAM6_ATOM_SILVERMONT1	},
-	{ X86_VENDOR_INTEL,	6,	INTEL_FAM6_ATOM_SILVERMONT2	},
-	{ X86_VENDOR_INTEL,	6,	INTEL_FAM6_ATOM_AIRMONT		},
-	{ X86_VENDOR_INTEL,	6,	INTEL_FAM6_ATOM_MERRIFIELD	},
-	{ X86_VENDOR_INTEL,	6,	INTEL_FAM6_ATOM_MOOREFIELD	},
-	{ X86_VENDOR_INTEL,	6,	INTEL_FAM6_ATOM_GOLDMONT	},
-	{ X86_VENDOR_INTEL,	6,	INTEL_FAM6_ATOM_DENVERTON	},
-	{ X86_VENDOR_INTEL,	6,	INTEL_FAM6_ATOM_GEMINI_LAKE	},
-	{ X86_VENDOR_INTEL,	6,	INTEL_FAM6_XEON_PHI_KNL		},
-	{ X86_VENDOR_INTEL,	6,	INTEL_FAM6_XEON_PHI_KNM		},
+	/* AMD Family 0xf - 0x12 */
+	VULNWL_AMD(0x0f,	NO_MELTDOWN | NO_SSB | NO_L1TF | NO_MDS),
+	VULNWL_AMD(0x10,	NO_MELTDOWN | NO_SSB | NO_L1TF | NO_MDS),
+	VULNWL_AMD(0x11,	NO_MELTDOWN | NO_SSB | NO_L1TF | NO_MDS),
+	VULNWL_AMD(0x12,	NO_MELTDOWN | NO_SSB | NO_L1TF | NO_MDS),
+
+	/* FAMILY_ANY must be last, otherwise 0x0f - 0x12 matches won't work */
+	VULNWL_AMD(X86_FAMILY_ANY,	NO_MELTDOWN | NO_L1TF | NO_MDS),
 	{}
 };
 
-static void __init cpu_set_bug_bits(struct cpuinfo_x86 *c)
+static bool __init cpu_matches(unsigned long which)
 {
-	u64 ia32_cap = 0;
+	const struct x86_cpu_id *m = x86_match_cpu(cpu_vuln_whitelist);
 
-	if (cpu_has(c, X86_FEATURE_ARCH_CAPABILITIES))
-		rdmsrl(MSR_IA32_ARCH_CAPABILITIES, ia32_cap);
+	return m && !!(m->driver_data & which);
+}
 
-	if (!x86_match_cpu(cpu_no_spec_store_bypass) &&
-	   !(ia32_cap & ARCH_CAP_SSB_NO))
-		setup_force_cpu_bug(X86_BUG_SPEC_STORE_BYPASS);
+static void __init cpu_set_bug_bits(struct cpuinfo_x86 *c)
+{
+	u64 ia32_cap = 0;
 
-	if (x86_match_cpu(cpu_no_speculation))
+	if (cpu_matches(NO_SPECULATION))
 		return;
 
 	setup_force_cpu_bug(X86_BUG_SPECTRE_V1);
 	setup_force_cpu_bug(X86_BUG_SPECTRE_V2);
 
+	if (cpu_has(c, X86_FEATURE_ARCH_CAPABILITIES))
+		rdmsrl(MSR_IA32_ARCH_CAPABILITIES, ia32_cap);
+
+	if (!cpu_matches(NO_SSB) && !(ia32_cap & ARCH_CAP_SSB_NO) &&
+	   !cpu_has(c, X86_FEATURE_AMD_SSB_NO))
+		setup_force_cpu_bug(X86_BUG_SPEC_STORE_BYPASS);
+
 	if (ia32_cap & ARCH_CAP_IBRS_ALL)
 		setup_force_cpu_cap(X86_FEATURE_IBRS_ENHANCED);
 
-	if (x86_match_cpu(cpu_no_meltdown))
+	if (!cpu_matches(NO_MDS) && !(ia32_cap & ARCH_CAP_MDS_NO)) {
+		setup_force_cpu_bug(X86_BUG_MDS);
+		if (cpu_matches(MSBDS_ONLY))
+			setup_force_cpu_bug(X86_BUG_MSBDS_ONLY);
+	}
+
+	if (cpu_matches(NO_MELTDOWN))
 		return;
 
 	/* Rogue Data Cache Load? No! */
@@ -971,7 +988,7 @@ static void __init cpu_set_bug_bits(struct cpuinfo_x86 *c)
 
 	setup_force_cpu_bug(X86_BUG_CPU_MELTDOWN);
 
-	if (x86_match_cpu(cpu_no_l1tf))
+	if (cpu_matches(NO_L1TF))
 		return;
 
 	setup_force_cpu_bug(X86_BUG_L1TF);
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index cee0fec0d232..860f2fd9f540 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -14,6 +14,7 @@
 #include <asm/bugs.h>
 #include <asm/cpu.h>
 #include <asm/intel-family.h>
+#include <asm/microcode_intel.h>
 
 #ifdef CONFIG_X86_64
 #include <linux/topology.h>
@@ -137,14 +138,8 @@ static void early_init_intel(struct cpuinfo_x86 *c)
 		(c->x86 == 0x6 && c->x86_model >= 0x0e))
 		set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
 
-	if (c->x86 >= 6 && !cpu_has(c, X86_FEATURE_IA64)) {
-		unsigned lower_word;
-
-		wrmsr(MSR_IA32_UCODE_REV, 0, 0);
-		/* Required by the SDM */
-		sync_core();
-		rdmsr(MSR_IA32_UCODE_REV, lower_word, c->microcode);
-	}
+	if (c->x86 >= 6 && !cpu_has(c, X86_FEATURE_IA64))
+		c->microcode = intel_get_microcode_revision();
 
 	/* Now if any of them are set, check the blacklist and clear the lot */
 	if ((cpu_has(c, X86_FEATURE_SPEC_CTRL) ||
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 25310d2b8609..d9ad49ca3cbe 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -139,6 +139,8 @@ void mce_setup(struct mce *m)
 	m->socketid = cpu_data(m->extcpu).phys_proc_id;
 	m->apicid = cpu_data(m->extcpu).initial_apicid;
 	rdmsrl(MSR_IA32_MCG_CAP, m->mcgcap);
+
+	m->microcode = boot_cpu_data.microcode;
 }
 
 DEFINE_PER_CPU(struct mce, injectm);
@@ -309,7 +311,7 @@ static void print_mce(struct mce *m)
 	 */
 	pr_emerg(HW_ERR "PROCESSOR %u:%x TIME %llu SOCKET %u APIC %x microcode %x\n",
 		m->cpuvendor, m->cpuid, m->time, m->socketid, m->apicid,
-		cpu_data(m->extcpu).microcode);
+		m->microcode);
 
 	pr_emerg_ratelimited(HW_ERR "Run the above through 'mcelog --ascii'\n");
 }
diff --git a/arch/x86/kernel/cpu/microcode/amd.c b/arch/x86/kernel/cpu/microcode/amd.c
index 732bb03fcf91..a19fddfb6bf8 100644
--- a/arch/x86/kernel/cpu/microcode/amd.c
+++ b/arch/x86/kernel/cpu/microcode/amd.c
@@ -707,22 +707,26 @@ int apply_microcode_amd(int cpu)
 		return -1;
 
 	/* need to apply patch? */
-	if (rev >= mc_amd->hdr.patch_id) {
-		c->microcode = rev;
-		uci->cpu_sig.rev = rev;
-		return 0;
-	}
+	if (rev >= mc_amd->hdr.patch_id)
+		goto out;
 
 	if (__apply_microcode_amd(mc_amd)) {
 		pr_err("CPU%d: update failed for patch_level=0x%08x\n",
 			cpu, mc_amd->hdr.patch_id);
 		return -1;
 	}
-	pr_info("CPU%d: new patch_level=0x%08x\n", cpu,
-		mc_amd->hdr.patch_id);
 
-	uci->cpu_sig.rev = mc_amd->hdr.patch_id;
-	c->microcode = mc_amd->hdr.patch_id;
+	rev = mc_amd->hdr.patch_id;
+
+	pr_info("CPU%d: new patch_level=0x%08x\n", cpu, rev);
+
+out:
+	uci->cpu_sig.rev = rev;
+	c->microcode	 = rev;
+
+	/* Update boot_cpu_data's revision too, if we're on the BSP: */
+	if (c->cpu_index == boot_cpu_data.cpu_index)
+		boot_cpu_data.microcode = rev;
 
 	return 0;
 }
diff --git a/arch/x86/kernel/cpu/microcode/intel.c b/arch/x86/kernel/cpu/microcode/intel.c
index 79291d6fb301..1308abfc4758 100644
--- a/arch/x86/kernel/cpu/microcode/intel.c
+++ b/arch/x86/kernel/cpu/microcode/intel.c
@@ -386,15 +386,8 @@ static int collect_cpu_info_early(struct ucode_cpu_info *uci)
 		native_rdmsr(MSR_IA32_PLATFORM_ID, val[0], val[1]);
 		csig.pf = 1 << ((val[1] >> 18) & 7);
 	}
-	native_wrmsrl(MSR_IA32_UCODE_REV, 0);
 
-	/* As documented in the SDM: Do a CPUID 1 here */
-	sync_core();
-
-	/* get the current revision from MSR 0x8B */
-	native_rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]);
-
-	csig.rev = val[1];
+	csig.rev = intel_get_microcode_revision();
 
 	uci->cpu_sig = csig;
 	uci->valid = 1;
@@ -618,29 +611,35 @@ static inline void print_ucode(struct ucode_cpu_info *uci)
 static int apply_microcode_early(struct ucode_cpu_info *uci, bool early)
 {
 	struct microcode_intel *mc;
-	unsigned int val[2];
+	u32 rev;
 
 	mc = uci->mc;
 	if (!mc)
 		return 0;
 
+	/*
+	 * Save us the MSR write below - which is a particular expensive
+	 * operation - when the other hyperthread has updated the microcode
+	 * already.
+	 */
+	rev = intel_get_microcode_revision();
+	if (rev >= mc->hdr.rev) {
+		uci->cpu_sig.rev = rev;
+		return 0;
+	}
+
 	/* write microcode via MSR 0x79 */
 	native_wrmsrl(MSR_IA32_UCODE_WRITE, (unsigned long)mc->bits);
-	native_wrmsrl(MSR_IA32_UCODE_REV, 0);
-
-	/* As documented in the SDM: Do a CPUID 1 here */
-	sync_core();
 
-	/* get the current revision from MSR 0x8B */
-	native_rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]);
-	if (val[1] != mc->hdr.rev)
+	rev = intel_get_microcode_revision();
+	if (rev != mc->hdr.rev)
 		return -1;
 
 #ifdef CONFIG_X86_64
 	/* Flush global tlb. This is precaution. */
 	flush_tlb_early();
 #endif
-	uci->cpu_sig.rev = val[1];
+	uci->cpu_sig.rev = rev;
 
 	if (early)
 		print_ucode(uci);
@@ -903,9 +902,9 @@ static int apply_microcode_intel(int cpu)
 {
 	struct microcode_intel *mc;
 	struct ucode_cpu_info *uci;
-	struct cpuinfo_x86 *c;
-	unsigned int val[2];
+	struct cpuinfo_x86 *c = &cpu_data(cpu);
 	static int prev_rev;
+	u32 rev;
 
 	/* We should bind the task to the CPU */
 	if (WARN_ON(raw_smp_processor_id() != cpu))
@@ -924,35 +923,42 @@ static int apply_microcode_intel(int cpu)
 	if (!get_matching_mc(mc, cpu))
 		return 0;
 
+	/*
+	 * Save us the MSR write below - which is a particular expensive
+	 * operation - when the other hyperthread has updated the microcode
+	 * already.
+	 */
+	rev = intel_get_microcode_revision();
+	if (rev >= mc->hdr.rev)
+		goto out;
+
 	/* write microcode via MSR 0x79 */
 	wrmsrl(MSR_IA32_UCODE_WRITE, (unsigned long)mc->bits);
-	wrmsrl(MSR_IA32_UCODE_REV, 0);
 
-	/* As documented in the SDM: Do a CPUID 1 here */
-	sync_core();
+	rev = intel_get_microcode_revision();
 
-	/* get the current revision from MSR 0x8B */
-	rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]);
-
-	if (val[1] != mc->hdr.rev) {
+	if (rev != mc->hdr.rev) {
 		pr_err("CPU%d update to revision 0x%x failed\n",
 		       cpu, mc->hdr.rev);
 		return -1;
 	}
 
-	if (val[1] != prev_rev) {
+	if (rev != prev_rev) {
 		pr_info("updated to revision 0x%x, date = %04x-%02x-%02x\n",
-			val[1],
+			rev,
 			mc->hdr.date & 0xffff,
 			mc->hdr.date >> 24,
 			(mc->hdr.date >> 16) & 0xff);
-		prev_rev = val[1];
+		prev_rev = rev;
 	}
 
-	c = &cpu_data(cpu);
+out:
+	uci->cpu_sig.rev = rev;
+	c->microcode	 = rev;
 
-	uci->cpu_sig.rev = val[1];
-	c->microcode = val[1];
+	/* Update boot_cpu_data's revision too, if we're on the BSP: */
+	if (c->cpu_index == boot_cpu_data.cpu_index)
+		boot_cpu_data.microcode = rev;
 
 	return 0;
 }
diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c
index bfe4d6c96fbd..6b7b35d80264 100644
--- a/arch/x86/kernel/nmi.c
+++ b/arch/x86/kernel/nmi.c
@@ -32,6 +32,7 @@
 #include <asm/x86_init.h>
 #include <asm/reboot.h>
 #include <asm/cache.h>
+#include <asm/nospec-branch.h>
 
 #define CREATE_TRACE_POINTS
 #include <trace/events/nmi.h>
@@ -544,6 +545,9 @@ nmi_restart:
 		write_cr2(this_cpu_read(nmi_cr2));
 	if (this_cpu_dec_return(nmi_state))
 		goto nmi_restart;
+
+	if (user_mode(regs))
+		mds_user_clear_cpu_buffers();
 }
 NOKPROBE_SYMBOL(do_nmi);
 
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index 00a9047539d7..2e4eab22ca37 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -35,6 +35,8 @@
 #include <asm/switch_to.h>
 #include <asm/spec-ctrl.h>
 
+#include "process.h"
+
 /*
  * per-CPU TSS segments. Threads are completely 'soft' on Linux,
  * no more per-task TSS's. The TSS size is kept cacheline-aligned
@@ -183,11 +185,12 @@ int set_tsc_mode(unsigned int val)
 	return 0;
 }
 
-static inline void switch_to_bitmap(struct tss_struct *tss,
-				    struct thread_struct *prev,
+static inline void switch_to_bitmap(struct thread_struct *prev,
 				    struct thread_struct *next,
 				    unsigned long tifp, unsigned long tifn)
 {
+	struct tss_struct *tss = this_cpu_ptr(&cpu_tss);
+
 	if (tifn & _TIF_IO_BITMAP) {
 		/*
 		 * Copy the relevant range of the IO bitmap.
@@ -321,32 +324,85 @@ static __always_inline void amd_set_ssb_virt_state(unsigned long tifn)
 	wrmsrl(MSR_AMD64_VIRT_SPEC_CTRL, ssbd_tif_to_spec_ctrl(tifn));
 }
 
-static __always_inline void intel_set_ssb_state(unsigned long tifn)
+/*
+ * Update the MSRs managing speculation control, during context switch.
+ *
+ * tifp: Previous task's thread flags
+ * tifn: Next task's thread flags
+ */
+static __always_inline void __speculation_ctrl_update(unsigned long tifp,
+						      unsigned long tifn)
 {
-	u64 msr = x86_spec_ctrl_base | ssbd_tif_to_spec_ctrl(tifn);
+	unsigned long tif_diff = tifp ^ tifn;
+	u64 msr = x86_spec_ctrl_base;
+	bool updmsr = false;
+
+	/*
+	 * If TIF_SSBD is different, select the proper mitigation
+	 * method. Note that if SSBD mitigation is disabled or permanentely
+	 * enabled this branch can't be taken because nothing can set
+	 * TIF_SSBD.
+	 */
+	if (tif_diff & _TIF_SSBD) {
+		if (static_cpu_has(X86_FEATURE_VIRT_SSBD)) {
+			amd_set_ssb_virt_state(tifn);
+		} else if (static_cpu_has(X86_FEATURE_LS_CFG_SSBD)) {
+			amd_set_core_ssb_state(tifn);
+		} else if (static_cpu_has(X86_FEATURE_SPEC_CTRL_SSBD) ||
+			   static_cpu_has(X86_FEATURE_AMD_SSBD)) {
+			msr |= ssbd_tif_to_spec_ctrl(tifn);
+			updmsr  = true;
+		}
+	}
+
+	/*
+	 * Only evaluate TIF_SPEC_IB if conditional STIBP is enabled,
+	 * otherwise avoid the MSR write.
+	 */
+	if (IS_ENABLED(CONFIG_SMP) &&
+	    static_branch_unlikely(&switch_to_cond_stibp)) {
+		updmsr |= !!(tif_diff & _TIF_SPEC_IB);
+		msr |= stibp_tif_to_spec_ctrl(tifn);
+	}
 
-	wrmsrl(MSR_IA32_SPEC_CTRL, msr);
+	if (updmsr)
+		wrmsrl(MSR_IA32_SPEC_CTRL, msr);
 }
 
-static __always_inline void __speculative_store_bypass_update(unsigned long tifn)
+static unsigned long speculation_ctrl_update_tif(struct task_struct *tsk)
 {
-	if (static_cpu_has(X86_FEATURE_VIRT_SSBD))
-		amd_set_ssb_virt_state(tifn);
-	else if (static_cpu_has(X86_FEATURE_LS_CFG_SSBD))
-		amd_set_core_ssb_state(tifn);
-	else
-		intel_set_ssb_state(tifn);
+	if (test_and_clear_tsk_thread_flag(tsk, TIF_SPEC_FORCE_UPDATE)) {
+		if (task_spec_ssb_disable(tsk))
+			set_tsk_thread_flag(tsk, TIF_SSBD);
+		else
+			clear_tsk_thread_flag(tsk, TIF_SSBD);
+
+		if (task_spec_ib_disable(tsk))
+			set_tsk_thread_flag(tsk, TIF_SPEC_IB);
+		else
+			clear_tsk_thread_flag(tsk, TIF_SPEC_IB);
+	}
+	/* Return the updated threadinfo flags*/
+	return task_thread_info(tsk)->flags;
 }
 
-void speculative_store_bypass_update(unsigned long tif)
+void speculation_ctrl_update(unsigned long tif)
 {
+	/* Forced update. Make sure all relevant TIF flags are different */
 	preempt_disable();
-	__speculative_store_bypass_update(tif);
+	__speculation_ctrl_update(~tif, tif);
 	preempt_enable();
 }
 
-void __switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p,
-		      struct tss_struct *tss)
+/* Called from seccomp/prctl update */
+void speculation_ctrl_update_current(void)
+{
+	preempt_disable();
+	speculation_ctrl_update(speculation_ctrl_update_tif(current));
+	preempt_enable();
+}
+
+void __switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p)
 {
 	struct thread_struct *prev, *next;
 	unsigned long tifp, tifn;
@@ -356,7 +412,7 @@ void __switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p,
 
 	tifn = READ_ONCE(task_thread_info(next_p)->flags);
 	tifp = READ_ONCE(task_thread_info(prev_p)->flags);
-	switch_to_bitmap(tss, prev, next, tifp, tifn);
+	switch_to_bitmap(prev, next, tifp, tifn);
 
 	propagate_user_return_notify(prev_p, next_p);
 
@@ -374,8 +430,15 @@ void __switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p,
 	if ((tifp ^ tifn) & _TIF_NOTSC)
 		cr4_toggle_bits(X86_CR4_TSD);
 
-	if ((tifp ^ tifn) & _TIF_SSBD)
-		__speculative_store_bypass_update(tifn);
+	if (likely(!((tifp | tifn) & _TIF_SPEC_FORCE_UPDATE))) {
+		__speculation_ctrl_update(tifp, tifn);
+	} else {
+		speculation_ctrl_update_tif(prev_p);
+		tifn = speculation_ctrl_update_tif(next_p);
+
+		/* Enforce MSR update to ensure consistent state */
+		__speculation_ctrl_update(~tifn, tifn);
+	}
 }
 
 /*
diff --git a/arch/x86/kernel/process.h b/arch/x86/kernel/process.h
new file mode 100644
index 000000000000..898e97cf6629
--- /dev/null
+++ b/arch/x86/kernel/process.h
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Code shared between 32 and 64 bit
+
+#include <asm/spec-ctrl.h>
+
+void __switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p);
+
+/*
+ * This needs to be inline to optimize for the common case where no extra
+ * work needs to be done.
+ */
+static inline void switch_to_extra(struct task_struct *prev,
+				   struct task_struct *next)
+{
+	unsigned long next_tif = task_thread_info(next)->flags;
+	unsigned long prev_tif = task_thread_info(prev)->flags;
+
+	if (IS_ENABLED(CONFIG_SMP)) {
+		/*
+		 * Avoid __switch_to_xtra() invocation when conditional
+		 * STIPB is disabled and the only different bit is
+		 * TIF_SPEC_IB. For CONFIG_SMP=n TIF_SPEC_IB is not
+		 * in the TIF_WORK_CTXSW masks.
+		 */
+		if (!static_branch_likely(&switch_to_cond_stibp)) {
+			prev_tif &= ~_TIF_SPEC_IB;
+			next_tif &= ~_TIF_SPEC_IB;
+		}
+	}
+
+	/*
+	 * __switch_to_xtra() handles debug registers, i/o bitmaps,
+	 * speculation mitigations etc.
+	 */
+	if (unlikely(next_tif & _TIF_WORK_CTXSW_NEXT ||
+		     prev_tif & _TIF_WORK_CTXSW_PREV))
+		__switch_to_xtra(prev, next);
+}
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index bd7be8efdc4c..912246fd6cd9 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -55,6 +55,8 @@
 #include <asm/switch_to.h>
 #include <asm/vm86.h>
 
+#include "process.h"
+
 void __show_regs(struct pt_regs *regs, int all)
 {
 	unsigned long cr0 = 0L, cr2 = 0L, cr3 = 0L, cr4 = 0L;
@@ -264,12 +266,7 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	if (get_kernel_rpl() && unlikely(prev->iopl != next->iopl))
 		set_iopl_mask(next->iopl);
 
-	/*
-	 * Now maybe handle debug registers and/or IO bitmaps
-	 */
-	if (unlikely(task_thread_info(prev_p)->flags & _TIF_WORK_CTXSW_PREV ||
-		     task_thread_info(next_p)->flags & _TIF_WORK_CTXSW_NEXT))
-		__switch_to_xtra(prev_p, next_p, tss);
+	switch_to_extra(prev_p, next_p);
 
 	/*
 	 * Leave lazy mode, flushing any hypercalls made here.
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index a2661814bde0..81eec65fe053 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -51,6 +51,8 @@
 #include <asm/xen/hypervisor.h>
 #include <asm/vdso.h>
 
+#include "process.h"
+
 __visible DEFINE_PER_CPU(unsigned long, rsp_scratch);
 
 /* Prints also some state that isn't saved in the pt_regs */
@@ -454,12 +456,7 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	/* Reload esp0 and ss1.  This changes current_thread_info(). */
 	load_sp0(tss, next);
 
-	/*
-	 * Now maybe reload the debug registers and handle I/O bitmaps
-	 */
-	if (unlikely(task_thread_info(next_p)->flags & _TIF_WORK_CTXSW_NEXT ||
-		     task_thread_info(prev_p)->flags & _TIF_WORK_CTXSW_PREV))
-		__switch_to_xtra(prev_p, next_p, tss);
+	switch_to_extra(prev_p, next_p);
 
 #ifdef CONFIG_XEN
 	/*
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 5bbfa2f63b8c..ef225fa8e928 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -62,6 +62,7 @@
 #include <asm/alternative.h>
 #include <asm/fpu/xstate.h>
 #include <asm/trace/mpx.h>
+#include <asm/nospec-branch.h>
 #include <asm/mpx.h>
 #include <asm/vm86.h>
 
@@ -340,6 +341,13 @@ dotraplinkage void do_double_fault(struct pt_regs *regs, long error_code)
 		regs->ip = (unsigned long)general_protection;
 		regs->sp = (unsigned long)&normal_regs->orig_ax;
 
+		/*
+		 * This situation can be triggered by userspace via
+		 * modify_ldt(2) and the return does not take the regular
+		 * user space exit, so a CPU buffer clear is required when
+		 * MDS mitigation is enabled.
+		 */
+		mds_user_clear_cpu_buffers();
 		return;
 	}
 #endif
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 769c370011d6..cb768417429d 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -713,7 +713,7 @@ unsigned long native_calibrate_tsc(void)
 		case INTEL_FAM6_KABYLAKE_DESKTOP:
 			crystal_khz = 24000;	/* 24.0 MHz */
 			break;
-		case INTEL_FAM6_ATOM_DENVERTON:
+		case INTEL_FAM6_ATOM_GOLDMONT_X:
 			crystal_khz = 25000;	/* 25.0 MHz */
 			break;
 		case INTEL_FAM6_ATOM_GOLDMONT:
diff --git a/arch/x86/kvm/cpuid.c b/arch/x86/kvm/cpuid.c
index c17d3893ae60..fc8236fd2495 100644
--- a/arch/x86/kvm/cpuid.c
+++ b/arch/x86/kvm/cpuid.c
@@ -355,7 +355,8 @@ static inline int __do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function,
 
 	/* cpuid 0x80000008.ebx */
 	const u32 kvm_cpuid_8000_0008_ebx_x86_features =
-		F(AMD_IBPB) | F(AMD_IBRS) | F(VIRT_SSBD);
+		F(AMD_IBPB) | F(AMD_IBRS) | F(AMD_SSBD) | F(VIRT_SSBD) |
+		F(AMD_SSB_NO) | F(AMD_STIBP);
 
 	/* cpuid 0xC0000001.edx */
 	const u32 kvm_cpuid_C000_0001_edx_x86_features =
@@ -380,7 +381,8 @@ static inline int __do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function,
 
 	/* cpuid 7.0.edx*/
 	const u32 kvm_cpuid_7_0_edx_x86_features =
-		F(SPEC_CTRL) | F(SPEC_CTRL_SSBD) | F(ARCH_CAPABILITIES);
+		F(SPEC_CTRL) | F(SPEC_CTRL_SSBD) | F(ARCH_CAPABILITIES) |
+		F(INTEL_STIBP) | F(MD_CLEAR);
 
 	/* all calls to cpuid_count() should be made on the same cpu */
 	get_cpu();
@@ -633,7 +635,12 @@ static inline int __do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function,
 			entry->ebx |= F(VIRT_SSBD);
 		entry->ebx &= kvm_cpuid_8000_0008_ebx_x86_features;
 		cpuid_mask(&entry->ebx, CPUID_8000_0008_EBX);
-		if (boot_cpu_has(X86_FEATURE_LS_CFG_SSBD))
+		/*
+		 * The preference is to use SPEC CTRL MSR instead of the
+		 * VIRT_SPEC MSR.
+		 */
+		if (boot_cpu_has(X86_FEATURE_LS_CFG_SSBD) &&
+		    !boot_cpu_has(X86_FEATURE_AMD_SSBD))
 			entry->ebx |= F(VIRT_SSBD);
 		break;
 	}
diff --git a/arch/x86/kvm/cpuid.h b/arch/x86/kvm/cpuid.h
index 8a841b9d8f84..b2bf8e1d5782 100644
--- a/arch/x86/kvm/cpuid.h
+++ b/arch/x86/kvm/cpuid.h
@@ -176,7 +176,7 @@ static inline bool guest_cpuid_has_spec_ctrl(struct kvm_vcpu *vcpu)
 	struct kvm_cpuid_entry2 *best;
 
 	best = kvm_find_cpuid_entry(vcpu, 0x80000008, 0);
-	if (best && (best->ebx & bit(X86_FEATURE_AMD_IBRS)))
+	if (best && (best->ebx & (bit(X86_FEATURE_AMD_IBRS | bit(X86_FEATURE_AMD_SSBD)))))
 		return true;
 	best = kvm_find_cpuid_entry(vcpu, 7, 0);
 	return best && (best->edx & (bit(X86_FEATURE_SPEC_CTRL) | bit(X86_FEATURE_SPEC_CTRL_SSBD)));
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 9a6d258c3c16..9338136a6a23 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -3704,7 +3704,7 @@ static int svm_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr)
 			return 1;
 
 		/* The STIBP bit doesn't fault even if it's not advertised */
-		if (data & ~(SPEC_CTRL_IBRS | SPEC_CTRL_STIBP))
+		if (data & ~(SPEC_CTRL_IBRS | SPEC_CTRL_STIBP | SPEC_CTRL_SSBD))
 			return 1;
 
 		svm->spec_ctrl = data;
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 75466d9417b8..8feb4f7e2e59 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -9206,8 +9206,11 @@ static void __noclone vmx_vcpu_run(struct kvm_vcpu *vcpu)
 
 	vmx->__launched = vmx->loaded_vmcs->launched;
 
+	/* L1D Flush includes CPU buffer clear to mitigate MDS */
 	if (static_branch_unlikely(&vmx_l1d_should_flush))
 		vmx_l1d_flush(vcpu);
+	else if (static_branch_unlikely(&mds_user_clear))
+		mds_clear_cpu_buffers();
 
 	asm(
 		/* Store host registers */
@@ -9566,8 +9569,8 @@ free_vcpu:
 	return ERR_PTR(err);
 }
 
-#define L1TF_MSG_SMT "L1TF CPU bug present and SMT on, data leak possible. See CVE-2018-3646 and https://www.kernel.org/doc/html/latest/admin-guide/l1tf.html for details.\n"
-#define L1TF_MSG_L1D "L1TF CPU bug present and virtualization mitigation disabled, data leak possible. See CVE-2018-3646 and https://www.kernel.org/doc/html/latest/admin-guide/l1tf.html for details.\n"
+#define L1TF_MSG_SMT "L1TF CPU bug present and SMT on, data leak possible. See CVE-2018-3646 and https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/l1tf.html for details.\n"
+#define L1TF_MSG_L1D "L1TF CPU bug present and virtualization mitigation disabled, data leak possible. See CVE-2018-3646 and https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/l1tf.html for details.\n"
 
 static int vmx_vm_init(struct kvm *kvm)
 {
diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index 90801a8f19c9..ce092a62fc5d 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -790,7 +790,7 @@ unsigned long max_swapfile_size(void)
 
 	pages = generic_max_swapfile_size();
 
-	if (boot_cpu_has_bug(X86_BUG_L1TF)) {
+	if (boot_cpu_has_bug(X86_BUG_L1TF) && l1tf_mitigation != L1TF_MITIGATION_OFF) {
 		/* Limit the swap file size to MAX_PA/2 for L1TF workaround */
 		unsigned long long l1tf_limit = l1tf_pfn_limit();
 		/*
diff --git a/arch/x86/mm/kaiser.c b/arch/x86/mm/kaiser.c
index 3f729e20f0e3..12522dbae615 100644
--- a/arch/x86/mm/kaiser.c
+++ b/arch/x86/mm/kaiser.c
@@ -9,6 +9,7 @@
 #include <linux/spinlock.h>
 #include <linux/mm.h>
 #include <linux/uaccess.h>
+#include <linux/cpu.h>
 
 #undef pr_fmt
 #define pr_fmt(fmt)     "Kernel/User page tables isolation: " fmt
@@ -297,7 +298,8 @@ void __init kaiser_check_boottime_disable(void)
 			goto skip;
 	}
 
-	if (cmdline_find_option_bool(boot_command_line, "nopti"))
+	if (cmdline_find_option_bool(boot_command_line, "nopti") ||
+	    cpu_mitigations_off())
 		goto disable;
 
 skip:
diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c
index e30baa8ad94f..dff8ac2d255c 100644
--- a/arch/x86/mm/pgtable.c
+++ b/arch/x86/mm/pgtable.c
@@ -251,7 +251,7 @@ static void pgd_mop_up_pmds(struct mm_struct *mm, pgd_t *pgdp)
 		if (pgd_val(pgd) != 0) {
 			pmd_t *pmd = (pmd_t *)pgd_page_vaddr(pgd);
 
-			pgdp[i] = native_make_pgd(0);
+			pgd_clear(&pgdp[i]);
 
 			paravirt_release_pmd(pgd_val(pgd) >> PAGE_SHIFT);
 			pmd_free(mm, pmd);
@@ -419,7 +419,7 @@ int ptep_set_access_flags(struct vm_area_struct *vma,
 	int changed = !pte_same(*ptep, entry);
 
 	if (changed && dirty) {
-		*ptep = entry;
+		set_pte(ptep, entry);
 		pte_update(vma->vm_mm, address, ptep);
 	}
 
@@ -436,7 +436,7 @@ int pmdp_set_access_flags(struct vm_area_struct *vma,
 	VM_BUG_ON(address & ~HPAGE_PMD_MASK);
 
 	if (changed && dirty) {
-		*pmdp = entry;
+		set_pmd(pmdp, entry);
 		/*
 		 * We had a write-protection fault here and changed the pmd
 		 * to to more permissive. No need to flush the TLB for that,
diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c
index eac92e2d171b..a112bb175dd4 100644
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -30,6 +30,12 @@
  *	Implement flush IPI by CALL_FUNCTION_VECTOR, Alex Shi
  */
 
+/*
+ * Use bit 0 to mangle the TIF_SPEC_IB state into the mm pointer which is
+ * stored in cpu_tlb_state.last_user_mm_ibpb.
+ */
+#define LAST_USER_MM_IBPB	0x1UL
+
 atomic64_t last_mm_ctx_id = ATOMIC64_INIT(1);
 
 struct flush_tlb_info {
@@ -101,33 +107,101 @@ void switch_mm(struct mm_struct *prev, struct mm_struct *next,
 	local_irq_restore(flags);
 }
 
+static inline unsigned long mm_mangle_tif_spec_ib(struct task_struct *next)
+{
+	unsigned long next_tif = task_thread_info(next)->flags;
+	unsigned long ibpb = (next_tif >> TIF_SPEC_IB) & LAST_USER_MM_IBPB;
+
+	return (unsigned long)next->mm | ibpb;
+}
+
+static void cond_ibpb(struct task_struct *next)
+{
+	if (!next || !next->mm)
+		return;
+
+	/*
+	 * Both, the conditional and the always IBPB mode use the mm
+	 * pointer to avoid the IBPB when switching between tasks of the
+	 * same process. Using the mm pointer instead of mm->context.ctx_id
+	 * opens a hypothetical hole vs. mm_struct reuse, which is more or
+	 * less impossible to control by an attacker. Aside of that it
+	 * would only affect the first schedule so the theoretically
+	 * exposed data is not really interesting.
+	 */
+	if (static_branch_likely(&switch_mm_cond_ibpb)) {
+		unsigned long prev_mm, next_mm;
+
+		/*
+		 * This is a bit more complex than the always mode because
+		 * it has to handle two cases:
+		 *
+		 * 1) Switch from a user space task (potential attacker)
+		 *    which has TIF_SPEC_IB set to a user space task
+		 *    (potential victim) which has TIF_SPEC_IB not set.
+		 *
+		 * 2) Switch from a user space task (potential attacker)
+		 *    which has TIF_SPEC_IB not set to a user space task
+		 *    (potential victim) which has TIF_SPEC_IB set.
+		 *
+		 * This could be done by unconditionally issuing IBPB when
+		 * a task which has TIF_SPEC_IB set is either scheduled in
+		 * or out. Though that results in two flushes when:
+		 *
+		 * - the same user space task is scheduled out and later
+		 *   scheduled in again and only a kernel thread ran in
+		 *   between.
+		 *
+		 * - a user space task belonging to the same process is
+		 *   scheduled in after a kernel thread ran in between
+		 *
+		 * - a user space task belonging to the same process is
+		 *   scheduled in immediately.
+		 *
+		 * Optimize this with reasonably small overhead for the
+		 * above cases. Mangle the TIF_SPEC_IB bit into the mm
+		 * pointer of the incoming task which is stored in
+		 * cpu_tlbstate.last_user_mm_ibpb for comparison.
+		 */
+		next_mm = mm_mangle_tif_spec_ib(next);
+		prev_mm = this_cpu_read(cpu_tlbstate.last_user_mm_ibpb);
+
+		/*
+		 * Issue IBPB only if the mm's are different and one or
+		 * both have the IBPB bit set.
+		 */
+		if (next_mm != prev_mm &&
+		    (next_mm | prev_mm) & LAST_USER_MM_IBPB)
+			indirect_branch_prediction_barrier();
+
+		this_cpu_write(cpu_tlbstate.last_user_mm_ibpb, next_mm);
+	}
+
+	if (static_branch_unlikely(&switch_mm_always_ibpb)) {
+		/*
+		 * Only flush when switching to a user space task with a
+		 * different context than the user space task which ran
+		 * last on this CPU.
+		 */
+		if (this_cpu_read(cpu_tlbstate.last_user_mm) != next->mm) {
+			indirect_branch_prediction_barrier();
+			this_cpu_write(cpu_tlbstate.last_user_mm, next->mm);
+		}
+	}
+}
+
 void switch_mm_irqs_off(struct mm_struct *prev, struct mm_struct *next,
 			struct task_struct *tsk)
 {
 	unsigned cpu = smp_processor_id();
 
 	if (likely(prev != next)) {
-		u64 last_ctx_id = this_cpu_read(cpu_tlbstate.last_ctx_id);
-
 		/*
 		 * Avoid user/user BTB poisoning by flushing the branch
 		 * predictor when switching between processes. This stops
 		 * one process from doing Spectre-v2 attacks on another.
-		 *
-		 * As an optimization, flush indirect branches only when
-		 * switching into processes that disable dumping. This
-		 * protects high value processes like gpg, without having
-		 * too high performance overhead. IBPB is *expensive*!
-		 *
-		 * This will not flush branches when switching into kernel
-		 * threads. It will also not flush if we switch to idle
-		 * thread and back to the same process. It will flush if we
-		 * switch to a different non-dumpable process.
 		 */
-		if (tsk && tsk->mm &&
-		    tsk->mm->context.ctx_id != last_ctx_id &&
-		    get_dumpable(tsk->mm) != SUID_DUMP_USER)
-			indirect_branch_prediction_barrier();
+		cond_ibpb(tsk);
 
 		if (IS_ENABLED(CONFIG_VMAP_STACK)) {
 			/*
@@ -143,14 +217,6 @@ void switch_mm_irqs_off(struct mm_struct *prev, struct mm_struct *next,
 				set_pgd(pgd, init_mm.pgd[stack_pgd_index]);
 		}
 
-		/*
-		 * Record last user mm's context id, so we can avoid
-		 * flushing branch buffer with IBPB if we switch back
-		 * to the same user.
-		 */
-		if (next != &init_mm)
-			this_cpu_write(cpu_tlbstate.last_ctx_id, next->context.ctx_id);
-
 		this_cpu_write(cpu_tlbstate.state, TLBSTATE_OK);
 		this_cpu_write(cpu_tlbstate.active_mm, next);
 
diff --git a/arch/x86/platform/atom/punit_atom_debug.c b/arch/x86/platform/atom/punit_atom_debug.c
index d49d3be81953..ecb5866aaf84 100644
--- a/arch/x86/platform/atom/punit_atom_debug.c
+++ b/arch/x86/platform/atom/punit_atom_debug.c
@@ -154,8 +154,8 @@ static void punit_dbgfs_unregister(void)
 	  (kernel_ulong_t)&drv_data }
 
 static const struct x86_cpu_id intel_punit_cpu_ids[] = {
-	ICPU(INTEL_FAM6_ATOM_SILVERMONT1, punit_device_byt),
-	ICPU(INTEL_FAM6_ATOM_MERRIFIELD,  punit_device_tng),
+	ICPU(INTEL_FAM6_ATOM_SILVERMONT, punit_device_byt),
+	ICPU(INTEL_FAM6_ATOM_SILVERMONT_MID,  punit_device_tng),
 	ICPU(INTEL_FAM6_ATOM_AIRMONT,	  punit_device_cht),
 	{}
 };
diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c
index 957d3fa3b543..8e38249311bd 100644
--- a/drivers/acpi/acpi_lpss.c
+++ b/drivers/acpi/acpi_lpss.c
@@ -243,7 +243,7 @@ static const struct lpss_device_desc bsw_spi_dev_desc = {
 #define ICPU(model)	{ X86_VENDOR_INTEL, 6, model, X86_FEATURE_ANY, }
 
 static const struct x86_cpu_id lpss_cpu_ids[] = {
-	ICPU(INTEL_FAM6_ATOM_SILVERMONT1),	/* Valleyview, Bay Trail */
+	ICPU(INTEL_FAM6_ATOM_SILVERMONT),	/* Valleyview, Bay Trail */
 	ICPU(INTEL_FAM6_ATOM_AIRMONT),	/* Braswell, Cherry Trail */
 	{}
 };
diff --git a/drivers/base/cpu.c b/drivers/base/cpu.c
index f1f4ce7ddb47..3b123735a1c4 100644
--- a/drivers/base/cpu.c
+++ b/drivers/base/cpu.c
@@ -531,11 +531,18 @@ ssize_t __weak cpu_show_l1tf(struct device *dev,
 	return sprintf(buf, "Not affected\n");
 }
 
+ssize_t __weak cpu_show_mds(struct device *dev,
+			    struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "Not affected\n");
+}
+
 static DEVICE_ATTR(meltdown, 0444, cpu_show_meltdown, NULL);
 static DEVICE_ATTR(spectre_v1, 0444, cpu_show_spectre_v1, NULL);
 static DEVICE_ATTR(spectre_v2, 0444, cpu_show_spectre_v2, NULL);
 static DEVICE_ATTR(spec_store_bypass, 0444, cpu_show_spec_store_bypass, NULL);
 static DEVICE_ATTR(l1tf, 0444, cpu_show_l1tf, NULL);
+static DEVICE_ATTR(mds, 0444, cpu_show_mds, NULL);
 
 static struct attribute *cpu_root_vulnerabilities_attrs[] = {
 	&dev_attr_meltdown.attr,
@@ -543,6 +550,7 @@ static struct attribute *cpu_root_vulnerabilities_attrs[] = {
 	&dev_attr_spectre_v2.attr,
 	&dev_attr_spec_store_bypass.attr,
 	&dev_attr_l1tf.attr,
+	&dev_attr_mds.attr,
 	NULL
 };
 
diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c
index f690085b1ad9..4fe999687415 100644
--- a/drivers/cpufreq/intel_pstate.c
+++ b/drivers/cpufreq/intel_pstate.c
@@ -1413,7 +1413,7 @@ static void intel_pstate_update_util(struct update_util_data *data, u64 time,
 static const struct x86_cpu_id intel_pstate_cpu_ids[] = {
 	ICPU(INTEL_FAM6_SANDYBRIDGE, 		core_params),
 	ICPU(INTEL_FAM6_SANDYBRIDGE_X,		core_params),
-	ICPU(INTEL_FAM6_ATOM_SILVERMONT1,	silvermont_params),
+	ICPU(INTEL_FAM6_ATOM_SILVERMONT,	silvermont_params),
 	ICPU(INTEL_FAM6_IVYBRIDGE,		core_params),
 	ICPU(INTEL_FAM6_HASWELL_CORE,		core_params),
 	ICPU(INTEL_FAM6_BROADWELL_CORE,		core_params),
diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c
index 5ded9b22b015..a6fa32c7e068 100644
--- a/drivers/idle/intel_idle.c
+++ b/drivers/idle/intel_idle.c
@@ -1107,14 +1107,14 @@ static const struct x86_cpu_id intel_idle_ids[] __initconst = {
 	ICPU(INTEL_FAM6_WESTMERE,		idle_cpu_nehalem),
 	ICPU(INTEL_FAM6_WESTMERE_EP,		idle_cpu_nehalem),
 	ICPU(INTEL_FAM6_NEHALEM_EX,		idle_cpu_nehalem),
-	ICPU(INTEL_FAM6_ATOM_PINEVIEW,		idle_cpu_atom),
-	ICPU(INTEL_FAM6_ATOM_LINCROFT,		idle_cpu_lincroft),
+	ICPU(INTEL_FAM6_ATOM_BONNELL,		idle_cpu_atom),
+	ICPU(INTEL_FAM6_ATOM_BONNELL_MID,		idle_cpu_lincroft),
 	ICPU(INTEL_FAM6_WESTMERE_EX,		idle_cpu_nehalem),
 	ICPU(INTEL_FAM6_SANDYBRIDGE,		idle_cpu_snb),
 	ICPU(INTEL_FAM6_SANDYBRIDGE_X,		idle_cpu_snb),
-	ICPU(INTEL_FAM6_ATOM_CEDARVIEW,		idle_cpu_atom),
-	ICPU(INTEL_FAM6_ATOM_SILVERMONT1,	idle_cpu_byt),
-	ICPU(INTEL_FAM6_ATOM_MERRIFIELD,	idle_cpu_tangier),
+	ICPU(INTEL_FAM6_ATOM_SALTWELL,		idle_cpu_atom),
+	ICPU(INTEL_FAM6_ATOM_SILVERMONT,	idle_cpu_byt),
+	ICPU(INTEL_FAM6_ATOM_SILVERMONT_MID,	idle_cpu_tangier),
 	ICPU(INTEL_FAM6_ATOM_AIRMONT,		idle_cpu_cht),
 	ICPU(INTEL_FAM6_IVYBRIDGE,		idle_cpu_ivb),
 	ICPU(INTEL_FAM6_IVYBRIDGE_X,		idle_cpu_ivt),
@@ -1122,7 +1122,7 @@ static const struct x86_cpu_id intel_idle_ids[] __initconst = {
 	ICPU(INTEL_FAM6_HASWELL_X,		idle_cpu_hsw),
 	ICPU(INTEL_FAM6_HASWELL_ULT,		idle_cpu_hsw),
 	ICPU(INTEL_FAM6_HASWELL_GT3E,		idle_cpu_hsw),
-	ICPU(INTEL_FAM6_ATOM_SILVERMONT2,	idle_cpu_avn),
+	ICPU(INTEL_FAM6_ATOM_SILVERMONT_X,	idle_cpu_avn),
 	ICPU(INTEL_FAM6_BROADWELL_CORE,		idle_cpu_bdw),
 	ICPU(INTEL_FAM6_BROADWELL_GT3E,		idle_cpu_bdw),
 	ICPU(INTEL_FAM6_BROADWELL_X,		idle_cpu_bdw),
@@ -1134,7 +1134,7 @@ static const struct x86_cpu_id intel_idle_ids[] __initconst = {
 	ICPU(INTEL_FAM6_SKYLAKE_X,		idle_cpu_skx),
 	ICPU(INTEL_FAM6_XEON_PHI_KNL,		idle_cpu_knl),
 	ICPU(INTEL_FAM6_ATOM_GOLDMONT,		idle_cpu_bxt),
-	ICPU(INTEL_FAM6_ATOM_DENVERTON,		idle_cpu_dnv),
+	ICPU(INTEL_FAM6_ATOM_GOLDMONT_X,	idle_cpu_dnv),
 	{}
 };
 
diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c
index 80918abfc468..4398398c0935 100644
--- a/drivers/mmc/host/sdhci-acpi.c
+++ b/drivers/mmc/host/sdhci-acpi.c
@@ -127,7 +127,7 @@ static const struct sdhci_acpi_chip sdhci_acpi_chip_int = {
 static bool sdhci_acpi_byt(void)
 {
 	static const struct x86_cpu_id byt[] = {
-		{ X86_VENDOR_INTEL, 6, INTEL_FAM6_ATOM_SILVERMONT1 },
+		{ X86_VENDOR_INTEL, 6, INTEL_FAM6_ATOM_SILVERMONT },
 		{}
 	};
 
diff --git a/drivers/pci/pci-mid.c b/drivers/pci/pci-mid.c
index c7f3408e3148..54b3f9bc5ad8 100644
--- a/drivers/pci/pci-mid.c
+++ b/drivers/pci/pci-mid.c
@@ -71,8 +71,8 @@ static struct pci_platform_pm_ops mid_pci_platform_pm = {
  * arch/x86/platform/intel-mid/pwr.c.
  */
 static const struct x86_cpu_id lpss_cpu_ids[] = {
-	ICPU(INTEL_FAM6_ATOM_PENWELL),
-	ICPU(INTEL_FAM6_ATOM_MERRIFIELD),
+	ICPU(INTEL_FAM6_ATOM_SALTWELL_MID),
+	ICPU(INTEL_FAM6_ATOM_SILVERMONT_MID),
 	{}
 };
 
diff --git a/drivers/powercap/intel_rapl.c b/drivers/powercap/intel_rapl.c
index 3c71f608b444..8809c1a20bed 100644
--- a/drivers/powercap/intel_rapl.c
+++ b/drivers/powercap/intel_rapl.c
@@ -1175,12 +1175,12 @@ static const struct x86_cpu_id rapl_ids[] __initconst = {
 	RAPL_CPU(INTEL_FAM6_KABYLAKE_MOBILE,	rapl_defaults_core),
 	RAPL_CPU(INTEL_FAM6_KABYLAKE_DESKTOP,	rapl_defaults_core),
 
-	RAPL_CPU(INTEL_FAM6_ATOM_SILVERMONT1,	rapl_defaults_byt),
+	RAPL_CPU(INTEL_FAM6_ATOM_SILVERMONT,	rapl_defaults_byt),
 	RAPL_CPU(INTEL_FAM6_ATOM_AIRMONT,	rapl_defaults_cht),
-	RAPL_CPU(INTEL_FAM6_ATOM_MERRIFIELD,	rapl_defaults_tng),
-	RAPL_CPU(INTEL_FAM6_ATOM_MOOREFIELD,	rapl_defaults_ann),
+	RAPL_CPU(INTEL_FAM6_ATOM_SILVERMONT_MID,rapl_defaults_tng),
+	RAPL_CPU(INTEL_FAM6_ATOM_AIRMONT_MID,	rapl_defaults_ann),
 	RAPL_CPU(INTEL_FAM6_ATOM_GOLDMONT,	rapl_defaults_core),
-	RAPL_CPU(INTEL_FAM6_ATOM_DENVERTON,	rapl_defaults_core),
+	RAPL_CPU(INTEL_FAM6_ATOM_GOLDMONT_X,	rapl_defaults_core),
 
 	RAPL_CPU(INTEL_FAM6_XEON_PHI_KNL,	rapl_defaults_hsw_server),
 	{}
diff --git a/drivers/thermal/intel_soc_dts_thermal.c b/drivers/thermal/intel_soc_dts_thermal.c
index b2bbaa1c60b0..18788109cae6 100644
--- a/drivers/thermal/intel_soc_dts_thermal.c
+++ b/drivers/thermal/intel_soc_dts_thermal.c
@@ -43,7 +43,7 @@ static irqreturn_t soc_irq_thread_fn(int irq, void *dev_data)
 }
 
 static const struct x86_cpu_id soc_thermal_ids[] = {
-	{ X86_VENDOR_INTEL, 6, INTEL_FAM6_ATOM_SILVERMONT1, 0,
+	{ X86_VENDOR_INTEL, 6, INTEL_FAM6_ATOM_SILVERMONT, 0,
 		BYT_SOC_DTS_APIC_IRQ},
 	{}
 };
diff --git a/include/linux/bitops.h b/include/linux/bitops.h
index a83c822c35c2..d4b167fc9ecb 100644
--- a/include/linux/bitops.h
+++ b/include/linux/bitops.h
@@ -1,28 +1,9 @@
 #ifndef _LINUX_BITOPS_H
 #define _LINUX_BITOPS_H
 #include <asm/types.h>
+#include <linux/bits.h>
 
-#ifdef	__KERNEL__
-#define BIT(nr)			(1UL << (nr))
-#define BIT_ULL(nr)		(1ULL << (nr))
-#define BIT_MASK(nr)		(1UL << ((nr) % BITS_PER_LONG))
-#define BIT_WORD(nr)		((nr) / BITS_PER_LONG)
-#define BIT_ULL_MASK(nr)	(1ULL << ((nr) % BITS_PER_LONG_LONG))
-#define BIT_ULL_WORD(nr)	((nr) / BITS_PER_LONG_LONG)
-#define BITS_PER_BYTE		8
 #define BITS_TO_LONGS(nr)	DIV_ROUND_UP(nr, BITS_PER_BYTE * sizeof(long))
-#endif
-
-/*
- * Create a contiguous bitmask starting at bit position @l and ending at
- * position @h. For example
- * GENMASK_ULL(39, 21) gives us the 64bit vector 0x000000ffffe00000.
- */
-#define GENMASK(h, l) \
-	(((~0UL) << (l)) & (~0UL >> (BITS_PER_LONG - 1 - (h))))
-
-#define GENMASK_ULL(h, l) \
-	(((~0ULL) << (l)) & (~0ULL >> (BITS_PER_LONG_LONG - 1 - (h))))
 
 extern unsigned int __sw_hweight8(unsigned int w);
 extern unsigned int __sw_hweight16(unsigned int w);
diff --git a/include/linux/bits.h b/include/linux/bits.h
new file mode 100644
index 000000000000..2b7b532c1d51
--- /dev/null
+++ b/include/linux/bits.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __LINUX_BITS_H
+#define __LINUX_BITS_H
+#include <asm/bitsperlong.h>
+
+#define BIT(nr)			(1UL << (nr))
+#define BIT_ULL(nr)		(1ULL << (nr))
+#define BIT_MASK(nr)		(1UL << ((nr) % BITS_PER_LONG))
+#define BIT_WORD(nr)		((nr) / BITS_PER_LONG)
+#define BIT_ULL_MASK(nr)	(1ULL << ((nr) % BITS_PER_LONG_LONG))
+#define BIT_ULL_WORD(nr)	((nr) / BITS_PER_LONG_LONG)
+#define BITS_PER_BYTE		8
+
+/*
+ * Create a contiguous bitmask starting at bit position @l and ending at
+ * position @h. For example
+ * GENMASK_ULL(39, 21) gives us the 64bit vector 0x000000ffffe00000.
+ */
+#define GENMASK(h, l) \
+	(((~0UL) - (1UL << (l)) + 1) & (~0UL >> (BITS_PER_LONG - 1 - (h))))
+
+#define GENMASK_ULL(h, l) \
+	(((~0ULL) - (1ULL << (l)) + 1) & \
+	 (~0ULL >> (BITS_PER_LONG_LONG - 1 - (h))))
+
+#endif	/* __LINUX_BITS_H */
diff --git a/include/linux/cpu.h b/include/linux/cpu.h
index ae5ac89324df..166686209f2c 100644
--- a/include/linux/cpu.h
+++ b/include/linux/cpu.h
@@ -54,6 +54,8 @@ extern ssize_t cpu_show_spec_store_bypass(struct device *dev,
 					  struct device_attribute *attr, char *buf);
 extern ssize_t cpu_show_l1tf(struct device *dev,
 			     struct device_attribute *attr, char *buf);
+extern ssize_t cpu_show_mds(struct device *dev,
+			    struct device_attribute *attr, char *buf);
 
 extern __printf(4, 5)
 struct device *cpu_device_create(struct device *parent, void *drvdata,
@@ -276,4 +278,28 @@ static inline void cpu_smt_check_topology_early(void) { }
 static inline void cpu_smt_check_topology(void) { }
 #endif
 
+/*
+ * These are used for a global "mitigations=" cmdline option for toggling
+ * optional CPU mitigations.
+ */
+enum cpu_mitigations {
+	CPU_MITIGATIONS_OFF,
+	CPU_MITIGATIONS_AUTO,
+	CPU_MITIGATIONS_AUTO_NOSMT,
+};
+
+extern enum cpu_mitigations cpu_mitigations;
+
+/* mitigations=off */
+static inline bool cpu_mitigations_off(void)
+{
+	return cpu_mitigations == CPU_MITIGATIONS_OFF;
+}
+
+/* mitigations=auto,nosmt */
+static inline bool cpu_mitigations_auto_nosmt(void)
+{
+	return cpu_mitigations == CPU_MITIGATIONS_AUTO_NOSMT;
+}
+
 #endif /* _LINUX_CPU_H_ */
diff --git a/include/linux/ptrace.h b/include/linux/ptrace.h
index d53a23100401..58ae371556bc 100644
--- a/include/linux/ptrace.h
+++ b/include/linux/ptrace.h
@@ -60,14 +60,17 @@ extern void exit_ptrace(struct task_struct *tracer, struct list_head *dead);
 #define PTRACE_MODE_READ	0x01
 #define PTRACE_MODE_ATTACH	0x02
 #define PTRACE_MODE_NOAUDIT	0x04
-#define PTRACE_MODE_FSCREDS 0x08
-#define PTRACE_MODE_REALCREDS 0x10
+#define PTRACE_MODE_FSCREDS	0x08
+#define PTRACE_MODE_REALCREDS	0x10
+#define PTRACE_MODE_SCHED	0x20
+#define PTRACE_MODE_IBPB	0x40
 
 /* shorthands for READ/ATTACH and FSCREDS/REALCREDS combinations */
 #define PTRACE_MODE_READ_FSCREDS (PTRACE_MODE_READ | PTRACE_MODE_FSCREDS)
 #define PTRACE_MODE_READ_REALCREDS (PTRACE_MODE_READ | PTRACE_MODE_REALCREDS)
 #define PTRACE_MODE_ATTACH_FSCREDS (PTRACE_MODE_ATTACH | PTRACE_MODE_FSCREDS)
 #define PTRACE_MODE_ATTACH_REALCREDS (PTRACE_MODE_ATTACH | PTRACE_MODE_REALCREDS)
+#define PTRACE_MODE_SPEC_IBPB (PTRACE_MODE_ATTACH_REALCREDS | PTRACE_MODE_IBPB)
 
 /**
  * ptrace_may_access - check whether the caller is permitted to access
@@ -85,6 +88,20 @@ extern void exit_ptrace(struct task_struct *tracer, struct list_head *dead);
  */
 extern bool ptrace_may_access(struct task_struct *task, unsigned int mode);
 
+/**
+ * ptrace_may_access - check whether the caller is permitted to access
+ * a target task.
+ * @task: target task
+ * @mode: selects type of access and caller credentials
+ *
+ * Returns true on success, false on denial.
+ *
+ * Similar to ptrace_may_access(). Only to be called from context switch
+ * code. Does not call into audit and the regular LSM hooks due to locking
+ * constraints.
+ */
+extern bool ptrace_may_access_sched(struct task_struct *task, unsigned int mode);
+
 static inline int ptrace_reparented(struct task_struct *child)
 {
 	return !same_thread_group(child->real_parent, child->parent);
diff --git a/include/linux/sched.h b/include/linux/sched.h
index ebd0afb35d16..1c487a3abd84 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -2357,6 +2357,8 @@ static inline void memalloc_noio_restore(unsigned int flags)
 #define PFA_LMK_WAITING  3      /* Lowmemorykiller is waiting */
 #define PFA_SPEC_SSB_DISABLE		4	/* Speculative Store Bypass disabled */
 #define PFA_SPEC_SSB_FORCE_DISABLE	5	/* Speculative Store Bypass force disabled*/
+#define PFA_SPEC_IB_DISABLE		6	/* Indirect branch speculation restricted */
+#define PFA_SPEC_IB_FORCE_DISABLE	7	/* Indirect branch speculation permanently restricted */
 
 
 #define TASK_PFA_TEST(name, func)					\
@@ -2390,6 +2392,13 @@ TASK_PFA_CLEAR(SPEC_SSB_DISABLE, spec_ssb_disable)
 TASK_PFA_TEST(SPEC_SSB_FORCE_DISABLE, spec_ssb_force_disable)
 TASK_PFA_SET(SPEC_SSB_FORCE_DISABLE, spec_ssb_force_disable)
 
+TASK_PFA_TEST(SPEC_IB_DISABLE, spec_ib_disable)
+TASK_PFA_SET(SPEC_IB_DISABLE, spec_ib_disable)
+TASK_PFA_CLEAR(SPEC_IB_DISABLE, spec_ib_disable)
+
+TASK_PFA_TEST(SPEC_IB_FORCE_DISABLE, spec_ib_force_disable)
+TASK_PFA_SET(SPEC_IB_FORCE_DISABLE, spec_ib_force_disable)
+
 /*
  * task->jobctl flags
  */
diff --git a/include/linux/sched/smt.h b/include/linux/sched/smt.h
new file mode 100644
index 000000000000..559ac4590593
--- /dev/null
+++ b/include/linux/sched/smt.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _LINUX_SCHED_SMT_H
+#define _LINUX_SCHED_SMT_H
+
+#include <linux/atomic.h>
+
+#ifdef CONFIG_SCHED_SMT
+extern atomic_t sched_smt_present;
+
+static __always_inline bool sched_smt_active(void)
+{
+	return atomic_read(&sched_smt_present);
+}
+#else
+static inline bool sched_smt_active(void) { return false; }
+#endif
+
+void arch_smt_update(void);
+
+#endif
diff --git a/include/uapi/linux/prctl.h b/include/uapi/linux/prctl.h
index 64776b72e1eb..64ec0d62e5f5 100644
--- a/include/uapi/linux/prctl.h
+++ b/include/uapi/linux/prctl.h
@@ -202,6 +202,7 @@ struct prctl_mm_map {
 #define PR_SET_SPECULATION_CTRL		53
 /* Speculation control variants */
 # define PR_SPEC_STORE_BYPASS		0
+# define PR_SPEC_INDIRECT_BRANCH	1
 /* Return and control values for PR_SET/GET_SPECULATION_CTRL */
 # define PR_SPEC_NOT_AFFECTED		0
 # define PR_SPEC_PRCTL			(1UL << 0)
diff --git a/kernel/cpu.c b/kernel/cpu.c
index bf24e8400903..db1a0bc46c3e 100644
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -8,6 +8,7 @@
 #include <linux/init.h>
 #include <linux/notifier.h>
 #include <linux/sched.h>
+#include <linux/sched/smt.h>
 #include <linux/unistd.h>
 #include <linux/cpu.h>
 #include <linux/oom.h>
@@ -356,6 +357,12 @@ void cpu_hotplug_enable(void)
 EXPORT_SYMBOL_GPL(cpu_hotplug_enable);
 #endif	/* CONFIG_HOTPLUG_CPU */
 
+/*
+ * Architectures that need SMT-specific errata handling during SMT hotplug
+ * should override this.
+ */
+void __weak arch_smt_update(void) { }
+
 #ifdef CONFIG_HOTPLUG_SMT
 enum cpuhp_smt_control cpu_smt_control __read_mostly = CPU_SMT_ENABLED;
 EXPORT_SYMBOL_GPL(cpu_smt_control);
@@ -1058,6 +1065,7 @@ out:
 	/* This post dead nonsense must die */
 	if (!ret && hasdied)
 		cpu_notify_nofail(CPU_POST_DEAD, cpu);
+	arch_smt_update();
 	return ret;
 }
 
@@ -1177,6 +1185,7 @@ static int _cpu_up(unsigned int cpu, int tasks_frozen, enum cpuhp_state target)
 	ret = cpuhp_up_callbacks(cpu, st, target);
 out:
 	cpu_hotplug_done();
+	arch_smt_update();
 	return ret;
 }
 
@@ -2012,8 +2021,10 @@ static int cpuhp_smt_disable(enum cpuhp_smt_control ctrlval)
 		 */
 		cpuhp_offline_cpu_device(cpu);
 	}
-	if (!ret)
+	if (!ret) {
 		cpu_smt_control = ctrlval;
+		arch_smt_update();
+	}
 	cpu_maps_update_done();
 	return ret;
 }
@@ -2024,6 +2035,7 @@ static int cpuhp_smt_enable(void)
 
 	cpu_maps_update_begin();
 	cpu_smt_control = CPU_SMT_ENABLED;
+	arch_smt_update();
 	for_each_present_cpu(cpu) {
 		/* Skip online CPUs and CPUs on offline nodes */
 		if (cpu_online(cpu) || !node_online(cpu_to_node(cpu)))
@@ -2222,3 +2234,18 @@ void __init boot_cpu_hotplug_init(void)
 #endif
 	this_cpu_write(cpuhp_state.state, CPUHP_ONLINE);
 }
+
+enum cpu_mitigations cpu_mitigations __ro_after_init = CPU_MITIGATIONS_AUTO;
+
+static int __init mitigations_parse_cmdline(char *arg)
+{
+	if (!strcmp(arg, "off"))
+		cpu_mitigations = CPU_MITIGATIONS_OFF;
+	else if (!strcmp(arg, "auto"))
+		cpu_mitigations = CPU_MITIGATIONS_AUTO;
+	else if (!strcmp(arg, "auto,nosmt"))
+		cpu_mitigations = CPU_MITIGATIONS_AUTO_NOSMT;
+
+	return 0;
+}
+early_param("mitigations", mitigations_parse_cmdline);
diff --git a/kernel/ptrace.c b/kernel/ptrace.c
index f39a7be98fc1..efba851ee018 100644
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -258,6 +258,9 @@ static int ptrace_check_attach(struct task_struct *child, bool ignore_state)
 
 static int ptrace_has_cap(struct user_namespace *ns, unsigned int mode)
 {
+	if (mode & PTRACE_MODE_SCHED)
+		return false;
+
 	if (mode & PTRACE_MODE_NOAUDIT)
 		return has_ns_capability_noaudit(current, ns, CAP_SYS_PTRACE);
 	else
@@ -325,9 +328,16 @@ ok:
 	     !ptrace_has_cap(mm->user_ns, mode)))
 	    return -EPERM;
 
+	if (mode & PTRACE_MODE_SCHED)
+		return 0;
 	return security_ptrace_access_check(task, mode);
 }
 
+bool ptrace_may_access_sched(struct task_struct *task, unsigned int mode)
+{
+	return __ptrace_may_access(task, mode | PTRACE_MODE_SCHED);
+}
+
 bool ptrace_may_access(struct task_struct *task, unsigned int mode)
 {
 	int err;
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 6b3fff6a6437..50e80b1be2c8 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -7355,11 +7355,22 @@ static int cpuset_cpu_inactive(unsigned int cpu)
 	return 0;
 }
 
+#ifdef CONFIG_SCHED_SMT
+atomic_t sched_smt_present = ATOMIC_INIT(0);
+#endif
+
 int sched_cpu_activate(unsigned int cpu)
 {
 	struct rq *rq = cpu_rq(cpu);
 	unsigned long flags;
 
+#ifdef CONFIG_SCHED_SMT
+	/*
+	 * When going up, increment the number of cores with SMT present.
+	 */
+	if (cpumask_weight(cpu_smt_mask(cpu)) == 2)
+		atomic_inc(&sched_smt_present);
+#endif
 	set_cpu_active(cpu, true);
 
 	if (sched_smp_initialized) {
@@ -7408,6 +7419,14 @@ int sched_cpu_deactivate(unsigned int cpu)
 	else
 		synchronize_rcu();
 
+#ifdef CONFIG_SCHED_SMT
+	/*
+	 * When going down, decrement the number of cores with SMT present.
+	 */
+	if (cpumask_weight(cpu_smt_mask(cpu)) == 2)
+		atomic_dec(&sched_smt_present);
+#endif
+
 	if (!sched_smp_initialized)
 		return 0;
 
diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h
index ec6e838e991a..15c08752926b 100644
--- a/kernel/sched/sched.h
+++ b/kernel/sched/sched.h
@@ -2,6 +2,7 @@
 #include <linux/sched.h>
 #include <linux/sched/sysctl.h>
 #include <linux/sched/rt.h>
+#include <linux/sched/smt.h>
 #include <linux/u64_stats_sync.h>
 #include <linux/sched/deadline.h>
 #include <linux/kernel_stat.h>
diff --git a/tools/power/x86/turbostat/Makefile b/tools/power/x86/turbostat/Makefile
index 8561e7ddca59..92be948c922d 100644
--- a/tools/power/x86/turbostat/Makefile
+++ b/tools/power/x86/turbostat/Makefile
@@ -8,7 +8,7 @@ ifeq ("$(origin O)", "command line")
 endif
 
 turbostat : turbostat.c
-CFLAGS +=	-Wall
+CFLAGS +=	-Wall -I../../../include
 CFLAGS +=	-DMSRHEADER='"../../../../arch/x86/include/asm/msr-index.h"'
 
 %: %.c