Contents of /trunk/kernel-magellan/patches-3.6/0104-3.6.5-all-fixes.patch
Parent Directory | Revision Log
Revision 1938 -
(show annotations)
(download)
Mon Nov 5 13:38:02 2012 UTC (11 years, 10 months ago) by niro
File size: 154425 byte(s)
Mon Nov 5 13:38:02 2012 UTC (11 years, 10 months ago) by niro
File size: 154425 byte(s)
-3.6.6-magellan-r1
1 | diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.txt b/Documentation/devicetree/bindings/arm/atmel-at91.txt |
2 | index ecc81e3..d187e9f 100644 |
3 | --- a/Documentation/devicetree/bindings/arm/atmel-at91.txt |
4 | +++ b/Documentation/devicetree/bindings/arm/atmel-at91.txt |
5 | @@ -8,7 +8,7 @@ PIT Timer required properties: |
6 | shared across all System Controller members. |
7 | |
8 | TC/TCLIB Timer required properties: |
9 | -- compatible: Should be "atmel,<chip>-pit". |
10 | +- compatible: Should be "atmel,<chip>-tcb". |
11 | <chip> can be "at91rm9200" or "at91sam9x5" |
12 | - reg: Should contain registers location and length |
13 | - interrupts: Should contain all interrupts for the TC block |
14 | diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c |
15 | index ebd8ad2..0181f7e 100644 |
16 | --- a/arch/arm/kernel/smp.c |
17 | +++ b/arch/arm/kernel/smp.c |
18 | @@ -222,18 +222,24 @@ static void percpu_timer_setup(void); |
19 | asmlinkage void __cpuinit secondary_start_kernel(void) |
20 | { |
21 | struct mm_struct *mm = &init_mm; |
22 | - unsigned int cpu = smp_processor_id(); |
23 | + unsigned int cpu; |
24 | + |
25 | + /* |
26 | + * The identity mapping is uncached (strongly ordered), so |
27 | + * switch away from it before attempting any exclusive accesses. |
28 | + */ |
29 | + cpu_switch_mm(mm->pgd, mm); |
30 | + enter_lazy_tlb(mm, current); |
31 | + local_flush_tlb_all(); |
32 | |
33 | /* |
34 | * All kernel threads share the same mm context; grab a |
35 | * reference and switch to it. |
36 | */ |
37 | + cpu = smp_processor_id(); |
38 | atomic_inc(&mm->mm_count); |
39 | current->active_mm = mm; |
40 | cpumask_set_cpu(cpu, mm_cpumask(mm)); |
41 | - cpu_switch_mm(mm->pgd, mm); |
42 | - enter_lazy_tlb(mm, current); |
43 | - local_flush_tlb_all(); |
44 | |
45 | printk("CPU%u: Booted secondary processor\n", cpu); |
46 | |
47 | diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c |
48 | index 01fb732..d5a4913 100644 |
49 | --- a/arch/arm/mach-at91/at91rm9200_devices.c |
50 | +++ b/arch/arm/mach-at91/at91rm9200_devices.c |
51 | @@ -463,7 +463,7 @@ static struct i2c_gpio_platform_data pdata = { |
52 | |
53 | static struct platform_device at91rm9200_twi_device = { |
54 | .name = "i2c-gpio", |
55 | - .id = -1, |
56 | + .id = 0, |
57 | .dev.platform_data = &pdata, |
58 | }; |
59 | |
60 | diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c |
61 | index bce572a..18ca240 100644 |
62 | --- a/arch/arm/mach-at91/at91sam9260_devices.c |
63 | +++ b/arch/arm/mach-at91/at91sam9260_devices.c |
64 | @@ -471,7 +471,7 @@ static struct i2c_gpio_platform_data pdata = { |
65 | |
66 | static struct platform_device at91sam9260_twi_device = { |
67 | .name = "i2c-gpio", |
68 | - .id = -1, |
69 | + .id = 0, |
70 | .dev.platform_data = &pdata, |
71 | }; |
72 | |
73 | diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c |
74 | index bc2590d..2495de8 100644 |
75 | --- a/arch/arm/mach-at91/at91sam9261_devices.c |
76 | +++ b/arch/arm/mach-at91/at91sam9261_devices.c |
77 | @@ -285,7 +285,7 @@ static struct i2c_gpio_platform_data pdata = { |
78 | |
79 | static struct platform_device at91sam9261_twi_device = { |
80 | .name = "i2c-gpio", |
81 | - .id = -1, |
82 | + .id = 0, |
83 | .dev.platform_data = &pdata, |
84 | }; |
85 | |
86 | diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c |
87 | index 9b6ca73..9877963 100644 |
88 | --- a/arch/arm/mach-at91/at91sam9263_devices.c |
89 | +++ b/arch/arm/mach-at91/at91sam9263_devices.c |
90 | @@ -542,7 +542,7 @@ static struct i2c_gpio_platform_data pdata = { |
91 | |
92 | static struct platform_device at91sam9263_twi_device = { |
93 | .name = "i2c-gpio", |
94 | - .id = -1, |
95 | + .id = 0, |
96 | .dev.platform_data = &pdata, |
97 | }; |
98 | |
99 | diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c |
100 | index b3d365d..c82a427 100644 |
101 | --- a/arch/arm/mach-at91/at91sam9rl_devices.c |
102 | +++ b/arch/arm/mach-at91/at91sam9rl_devices.c |
103 | @@ -314,7 +314,7 @@ static struct i2c_gpio_platform_data pdata = { |
104 | |
105 | static struct platform_device at91sam9rl_twi_device = { |
106 | .name = "i2c-gpio", |
107 | - .id = -1, |
108 | + .id = 0, |
109 | .dev.platform_data = &pdata, |
110 | }; |
111 | |
112 | diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c |
113 | index 18103c5d..997d359 100644 |
114 | --- a/arch/arm/mach-at91/board-neocore926.c |
115 | +++ b/arch/arm/mach-at91/board-neocore926.c |
116 | @@ -129,7 +129,7 @@ static struct spi_board_info neocore926_spi_devices[] = { |
117 | .max_speed_hz = 125000 * 16, |
118 | .bus_num = 0, |
119 | .platform_data = &ads_info, |
120 | - .irq = AT91SAM9263_ID_IRQ1, |
121 | + .irq = NR_IRQS_LEGACY + AT91SAM9263_ID_IRQ1, |
122 | }, |
123 | #endif |
124 | }; |
125 | diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c |
126 | index 2269be5..17659be 100644 |
127 | --- a/arch/arm/mach-at91/board-sam9261ek.c |
128 | +++ b/arch/arm/mach-at91/board-sam9261ek.c |
129 | @@ -309,7 +309,7 @@ static struct spi_board_info ek_spi_devices[] = { |
130 | .max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */ |
131 | .bus_num = 0, |
132 | .platform_data = &ads_info, |
133 | - .irq = AT91SAM9261_ID_IRQ0, |
134 | + .irq = NR_IRQS_LEGACY + AT91SAM9261_ID_IRQ0, |
135 | .controller_data = (void *) AT91_PIN_PA28, /* CS pin */ |
136 | }, |
137 | #endif |
138 | diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c |
139 | index 82adf58..9e7153b 100644 |
140 | --- a/arch/arm/mach-at91/board-sam9263ek.c |
141 | +++ b/arch/arm/mach-at91/board-sam9263ek.c |
142 | @@ -132,7 +132,7 @@ static struct spi_board_info ek_spi_devices[] = { |
143 | .max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */ |
144 | .bus_num = 0, |
145 | .platform_data = &ads_info, |
146 | - .irq = AT91SAM9263_ID_IRQ1, |
147 | + .irq = NR_IRQS_LEGACY + AT91SAM9263_ID_IRQ1, |
148 | }, |
149 | #endif |
150 | }; |
151 | diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h |
152 | index f496506..b62f560e 100644 |
153 | --- a/arch/arm/mach-at91/generic.h |
154 | +++ b/arch/arm/mach-at91/generic.h |
155 | @@ -26,7 +26,8 @@ extern void __init at91_dt_initialize(void); |
156 | extern void __init at91_init_irq_default(void); |
157 | extern void __init at91_init_interrupts(unsigned int priority[]); |
158 | extern void __init at91x40_init_interrupts(unsigned int priority[]); |
159 | -extern void __init at91_aic_init(unsigned int priority[]); |
160 | +extern void __init at91_aic_init(unsigned int priority[], |
161 | + unsigned int ext_irq_mask); |
162 | extern int __init at91_aic_of_init(struct device_node *node, |
163 | struct device_node *parent); |
164 | extern int __init at91_aic5_of_init(struct device_node *node, |
165 | diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c |
166 | index 1e02c0e..febc2ee 100644 |
167 | --- a/arch/arm/mach-at91/irq.c |
168 | +++ b/arch/arm/mach-at91/irq.c |
169 | @@ -502,14 +502,19 @@ int __init at91_aic5_of_init(struct device_node *node, |
170 | /* |
171 | * Initialize the AIC interrupt controller. |
172 | */ |
173 | -void __init at91_aic_init(unsigned int *priority) |
174 | +void __init at91_aic_init(unsigned int *priority, unsigned int ext_irq_mask) |
175 | { |
176 | unsigned int i; |
177 | int irq_base; |
178 | |
179 | - if (at91_aic_pm_init()) |
180 | + at91_extern_irq = kzalloc(BITS_TO_LONGS(n_irqs) |
181 | + * sizeof(*at91_extern_irq), GFP_KERNEL); |
182 | + |
183 | + if (at91_aic_pm_init() || at91_extern_irq == NULL) |
184 | panic("Unable to allocate bit maps\n"); |
185 | |
186 | + *at91_extern_irq = ext_irq_mask; |
187 | + |
188 | at91_aic_base = ioremap(AT91_AIC, 512); |
189 | if (!at91_aic_base) |
190 | panic("Unable to ioremap AIC registers\n"); |
191 | diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c |
192 | index 944bffb..bd0e88c 100644 |
193 | --- a/arch/arm/mach-at91/setup.c |
194 | +++ b/arch/arm/mach-at91/setup.c |
195 | @@ -47,7 +47,7 @@ void __init at91_init_irq_default(void) |
196 | void __init at91_init_interrupts(unsigned int *priority) |
197 | { |
198 | /* Initialize the AIC interrupt controller */ |
199 | - at91_aic_init(priority); |
200 | + at91_aic_init(priority, at91_extern_irq); |
201 | |
202 | /* Enable GPIO interrupts */ |
203 | at91_gpio_irq_setup(); |
204 | @@ -151,7 +151,7 @@ static void __init soc_detect(u32 dbgu_base) |
205 | } |
206 | |
207 | /* at91sam9g10 */ |
208 | - if ((cidr & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) { |
209 | + if ((socid & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) { |
210 | at91_soc_initdata.type = AT91_SOC_SAM9G10; |
211 | at91_boot_soc = at91sam9261_soc; |
212 | } |
213 | diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c |
214 | index 4eb39cd..3e02ae6 100644 |
215 | --- a/arch/arm/mach-exynos/common.c |
216 | +++ b/arch/arm/mach-exynos/common.c |
217 | @@ -47,6 +47,7 @@ |
218 | #include <plat/fimc-core.h> |
219 | #include <plat/iic-core.h> |
220 | #include <plat/tv-core.h> |
221 | +#include <plat/spi-core.h> |
222 | #include <plat/regs-serial.h> |
223 | |
224 | #include "common.h" |
225 | @@ -346,6 +347,8 @@ static void __init exynos4_map_io(void) |
226 | |
227 | s5p_fb_setname(0, "exynos4-fb"); |
228 | s5p_hdmi_setname("exynos4-hdmi"); |
229 | + |
230 | + s3c64xx_spi_setname("exynos4210-spi"); |
231 | } |
232 | |
233 | static void __init exynos5_map_io(void) |
234 | @@ -366,6 +369,8 @@ static void __init exynos5_map_io(void) |
235 | s3c_i2c0_setname("s3c2440-i2c"); |
236 | s3c_i2c1_setname("s3c2440-i2c"); |
237 | s3c_i2c2_setname("s3c2440-i2c"); |
238 | + |
239 | + s3c64xx_spi_setname("exynos4210-spi"); |
240 | } |
241 | |
242 | static void __init exynos4_init_clocks(int xtal) |
243 | diff --git a/arch/arm/mach-s3c24xx/s3c2416.c b/arch/arm/mach-s3c24xx/s3c2416.c |
244 | index ed5a95ec..77ee0b7 100644 |
245 | --- a/arch/arm/mach-s3c24xx/s3c2416.c |
246 | +++ b/arch/arm/mach-s3c24xx/s3c2416.c |
247 | @@ -61,6 +61,7 @@ |
248 | #include <plat/nand-core.h> |
249 | #include <plat/adc-core.h> |
250 | #include <plat/rtc-core.h> |
251 | +#include <plat/spi-core.h> |
252 | |
253 | static struct map_desc s3c2416_iodesc[] __initdata = { |
254 | IODESC_ENT(WATCHDOG), |
255 | @@ -132,6 +133,7 @@ void __init s3c2416_map_io(void) |
256 | /* initialize device information early */ |
257 | s3c2416_default_sdhci0(); |
258 | s3c2416_default_sdhci1(); |
259 | + s3c64xx_spi_setname("s3c2443-spi"); |
260 | |
261 | iotable_init(s3c2416_iodesc, ARRAY_SIZE(s3c2416_iodesc)); |
262 | } |
263 | diff --git a/arch/arm/mach-s3c24xx/s3c2443.c b/arch/arm/mach-s3c24xx/s3c2443.c |
264 | index ab648ad..165b6a6 100644 |
265 | --- a/arch/arm/mach-s3c24xx/s3c2443.c |
266 | +++ b/arch/arm/mach-s3c24xx/s3c2443.c |
267 | @@ -43,6 +43,7 @@ |
268 | #include <plat/nand-core.h> |
269 | #include <plat/adc-core.h> |
270 | #include <plat/rtc-core.h> |
271 | +#include <plat/spi-core.h> |
272 | |
273 | static struct map_desc s3c2443_iodesc[] __initdata = { |
274 | IODESC_ENT(WATCHDOG), |
275 | @@ -100,6 +101,9 @@ void __init s3c2443_map_io(void) |
276 | s3c24xx_gpiocfg_default.set_pull = s3c2443_gpio_setpull; |
277 | s3c24xx_gpiocfg_default.get_pull = s3c2443_gpio_getpull; |
278 | |
279 | + /* initialize device information early */ |
280 | + s3c64xx_spi_setname("s3c2443-spi"); |
281 | + |
282 | iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc)); |
283 | } |
284 | |
285 | diff --git a/arch/arm/mach-s5p64x0/common.c b/arch/arm/mach-s5p64x0/common.c |
286 | index 6e6a0a9..111e404 100644 |
287 | --- a/arch/arm/mach-s5p64x0/common.c |
288 | +++ b/arch/arm/mach-s5p64x0/common.c |
289 | @@ -44,6 +44,7 @@ |
290 | #include <plat/sdhci.h> |
291 | #include <plat/adc-core.h> |
292 | #include <plat/fb-core.h> |
293 | +#include <plat/spi-core.h> |
294 | #include <plat/gpio-cfg.h> |
295 | #include <plat/regs-irqtype.h> |
296 | #include <plat/regs-serial.h> |
297 | @@ -179,6 +180,7 @@ void __init s5p6440_map_io(void) |
298 | /* initialize any device information early */ |
299 | s3c_adc_setname("s3c64xx-adc"); |
300 | s3c_fb_setname("s5p64x0-fb"); |
301 | + s3c64xx_spi_setname("s5p64x0-spi"); |
302 | |
303 | s5p64x0_default_sdhci0(); |
304 | s5p64x0_default_sdhci1(); |
305 | @@ -193,6 +195,7 @@ void __init s5p6450_map_io(void) |
306 | /* initialize any device information early */ |
307 | s3c_adc_setname("s3c64xx-adc"); |
308 | s3c_fb_setname("s5p64x0-fb"); |
309 | + s3c64xx_spi_setname("s5p64x0-spi"); |
310 | |
311 | s5p64x0_default_sdhci0(); |
312 | s5p64x0_default_sdhci1(); |
313 | diff --git a/arch/arm/mach-s5pc100/common.c b/arch/arm/mach-s5pc100/common.c |
314 | index 6219086..cc6e561 100644 |
315 | --- a/arch/arm/mach-s5pc100/common.c |
316 | +++ b/arch/arm/mach-s5pc100/common.c |
317 | @@ -45,6 +45,7 @@ |
318 | #include <plat/fb-core.h> |
319 | #include <plat/iic-core.h> |
320 | #include <plat/onenand-core.h> |
321 | +#include <plat/spi-core.h> |
322 | #include <plat/regs-serial.h> |
323 | #include <plat/watchdog-reset.h> |
324 | |
325 | @@ -165,6 +166,8 @@ void __init s5pc100_map_io(void) |
326 | s3c_onenand_setname("s5pc100-onenand"); |
327 | s3c_fb_setname("s5pc100-fb"); |
328 | s3c_cfcon_setname("s5pc100-pata"); |
329 | + |
330 | + s3c64xx_spi_setname("s5pc100-spi"); |
331 | } |
332 | |
333 | void __init s5pc100_init_clocks(int xtal) |
334 | diff --git a/arch/arm/mach-s5pv210/common.c b/arch/arm/mach-s5pv210/common.c |
335 | index 4c9e902..a0c50ef 100644 |
336 | --- a/arch/arm/mach-s5pv210/common.c |
337 | +++ b/arch/arm/mach-s5pv210/common.c |
338 | @@ -43,6 +43,7 @@ |
339 | #include <plat/iic-core.h> |
340 | #include <plat/keypad-core.h> |
341 | #include <plat/tv-core.h> |
342 | +#include <plat/spi-core.h> |
343 | #include <plat/regs-serial.h> |
344 | |
345 | #include "common.h" |
346 | @@ -196,6 +197,8 @@ void __init s5pv210_map_io(void) |
347 | |
348 | /* setup TV devices */ |
349 | s5p_hdmi_setname("s5pv210-hdmi"); |
350 | + |
351 | + s3c64xx_spi_setname("s5pv210-spi"); |
352 | } |
353 | |
354 | void __init s5pv210_init_clocks(int xtal) |
355 | diff --git a/arch/arm/plat-samsung/include/plat/spi-core.h b/arch/arm/plat-samsung/include/plat/spi-core.h |
356 | new file mode 100644 |
357 | index 0000000..0b9428a |
358 | --- /dev/null |
359 | +++ b/arch/arm/plat-samsung/include/plat/spi-core.h |
360 | @@ -0,0 +1,30 @@ |
361 | +/* |
362 | + * Copyright (C) 2012 Heiko Stuebner <heiko@sntech.de> |
363 | + * |
364 | + * This program is free software; you can redistribute it and/or modify |
365 | + * it under the terms of the GNU General Public License version 2 as |
366 | + * published by the Free Software Foundation. |
367 | + */ |
368 | + |
369 | +#ifndef __PLAT_S3C_SPI_CORE_H |
370 | +#define __PLAT_S3C_SPI_CORE_H |
371 | + |
372 | +/* These functions are only for use with the core support code, such as |
373 | + * the cpu specific initialisation code |
374 | + */ |
375 | + |
376 | +/* re-define device name depending on support. */ |
377 | +static inline void s3c64xx_spi_setname(char *name) |
378 | +{ |
379 | +#ifdef CONFIG_S3C64XX_DEV_SPI0 |
380 | + s3c64xx_device_spi0.name = name; |
381 | +#endif |
382 | +#ifdef CONFIG_S3C64XX_DEV_SPI1 |
383 | + s3c64xx_device_spi1.name = name; |
384 | +#endif |
385 | +#ifdef CONFIG_S3C64XX_DEV_SPI2 |
386 | + s3c64xx_device_spi2.name = name; |
387 | +#endif |
388 | +} |
389 | + |
390 | +#endif /* __PLAT_S3C_SPI_CORE_H */ |
391 | diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h |
392 | index c9dcc18..029189d 100644 |
393 | --- a/arch/x86/include/asm/efi.h |
394 | +++ b/arch/x86/include/asm/efi.h |
395 | @@ -98,6 +98,7 @@ extern void efi_set_executable(efi_memory_desc_t *md, bool executable); |
396 | extern int efi_memblock_x86_reserve_range(void); |
397 | extern void efi_call_phys_prelog(void); |
398 | extern void efi_call_phys_epilog(void); |
399 | +extern void efi_unmap_memmap(void); |
400 | |
401 | #ifndef CONFIG_EFI |
402 | /* |
403 | diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c |
404 | index ed858e9..df06ade 100644 |
405 | --- a/arch/x86/kernel/e820.c |
406 | +++ b/arch/x86/kernel/e820.c |
407 | @@ -1077,6 +1077,9 @@ void __init memblock_x86_fill(void) |
408 | memblock_add(ei->addr, ei->size); |
409 | } |
410 | |
411 | + /* throw away partial pages */ |
412 | + memblock_trim_memory(PAGE_SIZE); |
413 | + |
414 | memblock_dump_all(); |
415 | } |
416 | |
417 | diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c |
418 | index 198e774..5cee802 100644 |
419 | --- a/arch/x86/kernel/setup.c |
420 | +++ b/arch/x86/kernel/setup.c |
421 | @@ -920,18 +920,19 @@ void __init setup_arch(char **cmdline_p) |
422 | #ifdef CONFIG_X86_64 |
423 | if (max_pfn > max_low_pfn) { |
424 | int i; |
425 | - for (i = 0; i < e820.nr_map; i++) { |
426 | - struct e820entry *ei = &e820.map[i]; |
427 | + unsigned long start, end; |
428 | + unsigned long start_pfn, end_pfn; |
429 | |
430 | - if (ei->addr + ei->size <= 1UL << 32) |
431 | - continue; |
432 | + for_each_mem_pfn_range(i, MAX_NUMNODES, &start_pfn, &end_pfn, |
433 | + NULL) { |
434 | |
435 | - if (ei->type == E820_RESERVED) |
436 | + end = PFN_PHYS(end_pfn); |
437 | + if (end <= (1UL<<32)) |
438 | continue; |
439 | |
440 | + start = PFN_PHYS(start_pfn); |
441 | max_pfn_mapped = init_memory_mapping( |
442 | - ei->addr < 1UL << 32 ? 1UL << 32 : ei->addr, |
443 | - ei->addr + ei->size); |
444 | + max((1UL<<32), start), end); |
445 | } |
446 | |
447 | /* can we preseve max_low_pfn ?*/ |
448 | @@ -1047,6 +1048,18 @@ void __init setup_arch(char **cmdline_p) |
449 | mcheck_init(); |
450 | |
451 | arch_init_ideal_nops(); |
452 | + |
453 | +#ifdef CONFIG_EFI |
454 | + /* Once setup is done above, disable efi_enabled on mismatched |
455 | + * firmware/kernel archtectures since there is no support for |
456 | + * runtime services. |
457 | + */ |
458 | + if (efi_enabled && IS_ENABLED(CONFIG_X86_64) != efi_64bit) { |
459 | + pr_info("efi: Setup done, disabling due to 32/64-bit mismatch\n"); |
460 | + efi_unmap_memmap(); |
461 | + efi_enabled = 0; |
462 | + } |
463 | +#endif |
464 | } |
465 | |
466 | #ifdef CONFIG_X86_32 |
467 | diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c |
468 | index ab1f6a9..d7aea41 100644 |
469 | --- a/arch/x86/mm/init.c |
470 | +++ b/arch/x86/mm/init.c |
471 | @@ -35,40 +35,44 @@ struct map_range { |
472 | unsigned page_size_mask; |
473 | }; |
474 | |
475 | -static void __init find_early_table_space(struct map_range *mr, unsigned long end, |
476 | - int use_pse, int use_gbpages) |
477 | +/* |
478 | + * First calculate space needed for kernel direct mapping page tables to cover |
479 | + * mr[0].start to mr[nr_range - 1].end, while accounting for possible 2M and 1GB |
480 | + * pages. Then find enough contiguous space for those page tables. |
481 | + */ |
482 | +static void __init find_early_table_space(struct map_range *mr, int nr_range) |
483 | { |
484 | - unsigned long puds, pmds, ptes, tables, start = 0, good_end = end; |
485 | + int i; |
486 | + unsigned long puds = 0, pmds = 0, ptes = 0, tables; |
487 | + unsigned long start = 0, good_end; |
488 | phys_addr_t base; |
489 | |
490 | - puds = (end + PUD_SIZE - 1) >> PUD_SHIFT; |
491 | - tables = roundup(puds * sizeof(pud_t), PAGE_SIZE); |
492 | - |
493 | - if (use_gbpages) { |
494 | - unsigned long extra; |
495 | - |
496 | - extra = end - ((end>>PUD_SHIFT) << PUD_SHIFT); |
497 | - pmds = (extra + PMD_SIZE - 1) >> PMD_SHIFT; |
498 | - } else |
499 | - pmds = (end + PMD_SIZE - 1) >> PMD_SHIFT; |
500 | + for (i = 0; i < nr_range; i++) { |
501 | + unsigned long range, extra; |
502 | |
503 | - tables += roundup(pmds * sizeof(pmd_t), PAGE_SIZE); |
504 | + range = mr[i].end - mr[i].start; |
505 | + puds += (range + PUD_SIZE - 1) >> PUD_SHIFT; |
506 | |
507 | - if (use_pse) { |
508 | - unsigned long extra; |
509 | + if (mr[i].page_size_mask & (1 << PG_LEVEL_1G)) { |
510 | + extra = range - ((range >> PUD_SHIFT) << PUD_SHIFT); |
511 | + pmds += (extra + PMD_SIZE - 1) >> PMD_SHIFT; |
512 | + } else { |
513 | + pmds += (range + PMD_SIZE - 1) >> PMD_SHIFT; |
514 | + } |
515 | |
516 | - extra = end - ((end>>PMD_SHIFT) << PMD_SHIFT); |
517 | + if (mr[i].page_size_mask & (1 << PG_LEVEL_2M)) { |
518 | + extra = range - ((range >> PMD_SHIFT) << PMD_SHIFT); |
519 | #ifdef CONFIG_X86_32 |
520 | - extra += PMD_SIZE; |
521 | + extra += PMD_SIZE; |
522 | #endif |
523 | - /* The first 2/4M doesn't use large pages. */ |
524 | - if (mr->start < PMD_SIZE) |
525 | - extra += mr->end - mr->start; |
526 | - |
527 | - ptes = (extra + PAGE_SIZE - 1) >> PAGE_SHIFT; |
528 | - } else |
529 | - ptes = (end + PAGE_SIZE - 1) >> PAGE_SHIFT; |
530 | + ptes += (extra + PAGE_SIZE - 1) >> PAGE_SHIFT; |
531 | + } else { |
532 | + ptes += (range + PAGE_SIZE - 1) >> PAGE_SHIFT; |
533 | + } |
534 | + } |
535 | |
536 | + tables = roundup(puds * sizeof(pud_t), PAGE_SIZE); |
537 | + tables += roundup(pmds * sizeof(pmd_t), PAGE_SIZE); |
538 | tables += roundup(ptes * sizeof(pte_t), PAGE_SIZE); |
539 | |
540 | #ifdef CONFIG_X86_32 |
541 | @@ -86,7 +90,7 @@ static void __init find_early_table_space(struct map_range *mr, unsigned long en |
542 | pgt_buf_top = pgt_buf_start + (tables >> PAGE_SHIFT); |
543 | |
544 | printk(KERN_DEBUG "kernel direct mapping tables up to %#lx @ [mem %#010lx-%#010lx]\n", |
545 | - end - 1, pgt_buf_start << PAGE_SHIFT, |
546 | + mr[nr_range - 1].end - 1, pgt_buf_start << PAGE_SHIFT, |
547 | (pgt_buf_top << PAGE_SHIFT) - 1); |
548 | } |
549 | |
550 | @@ -267,7 +271,7 @@ unsigned long __init_refok init_memory_mapping(unsigned long start, |
551 | * nodes are discovered. |
552 | */ |
553 | if (!after_bootmem) |
554 | - find_early_table_space(&mr[0], end, use_pse, use_gbpages); |
555 | + find_early_table_space(mr, nr_range); |
556 | |
557 | for (i = 0; i < nr_range; i++) |
558 | ret = kernel_physical_mapping_init(mr[i].start, mr[i].end, |
559 | diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c |
560 | index 2b6b4a3..3baff25 100644 |
561 | --- a/arch/x86/mm/init_64.c |
562 | +++ b/arch/x86/mm/init_64.c |
563 | @@ -386,7 +386,8 @@ phys_pte_init(pte_t *pte_page, unsigned long addr, unsigned long end, |
564 | * these mappings are more intelligent. |
565 | */ |
566 | if (pte_val(*pte)) { |
567 | - pages++; |
568 | + if (!after_bootmem) |
569 | + pages++; |
570 | continue; |
571 | } |
572 | |
573 | @@ -451,6 +452,8 @@ phys_pmd_init(pmd_t *pmd_page, unsigned long address, unsigned long end, |
574 | * attributes. |
575 | */ |
576 | if (page_size_mask & (1 << PG_LEVEL_2M)) { |
577 | + if (!after_bootmem) |
578 | + pages++; |
579 | last_map_addr = next; |
580 | continue; |
581 | } |
582 | @@ -526,6 +529,8 @@ phys_pud_init(pud_t *pud_page, unsigned long addr, unsigned long end, |
583 | * attributes. |
584 | */ |
585 | if (page_size_mask & (1 << PG_LEVEL_1G)) { |
586 | + if (!after_bootmem) |
587 | + pages++; |
588 | last_map_addr = next; |
589 | continue; |
590 | } |
591 | diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c |
592 | index f55a4ce..72d8899 100644 |
593 | --- a/arch/x86/platform/efi/efi.c |
594 | +++ b/arch/x86/platform/efi/efi.c |
595 | @@ -69,11 +69,15 @@ EXPORT_SYMBOL(efi); |
596 | struct efi_memory_map memmap; |
597 | |
598 | bool efi_64bit; |
599 | -static bool efi_native; |
600 | |
601 | static struct efi efi_phys __initdata; |
602 | static efi_system_table_t efi_systab __initdata; |
603 | |
604 | +static inline bool efi_is_native(void) |
605 | +{ |
606 | + return IS_ENABLED(CONFIG_X86_64) == efi_64bit; |
607 | +} |
608 | + |
609 | static int __init setup_noefi(char *arg) |
610 | { |
611 | efi_enabled = 0; |
612 | @@ -419,10 +423,21 @@ void __init efi_reserve_boot_services(void) |
613 | } |
614 | } |
615 | |
616 | -static void __init efi_free_boot_services(void) |
617 | +void __init efi_unmap_memmap(void) |
618 | +{ |
619 | + if (memmap.map) { |
620 | + early_iounmap(memmap.map, memmap.nr_map * memmap.desc_size); |
621 | + memmap.map = NULL; |
622 | + } |
623 | +} |
624 | + |
625 | +void __init efi_free_boot_services(void) |
626 | { |
627 | void *p; |
628 | |
629 | + if (!efi_is_native()) |
630 | + return; |
631 | + |
632 | for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) { |
633 | efi_memory_desc_t *md = p; |
634 | unsigned long long start = md->phys_addr; |
635 | @@ -438,6 +453,8 @@ static void __init efi_free_boot_services(void) |
636 | |
637 | free_bootmem_late(start, size); |
638 | } |
639 | + |
640 | + efi_unmap_memmap(); |
641 | } |
642 | |
643 | static int __init efi_systab_init(void *phys) |
644 | @@ -670,12 +687,10 @@ void __init efi_init(void) |
645 | return; |
646 | } |
647 | efi_phys.systab = (efi_system_table_t *)boot_params.efi_info.efi_systab; |
648 | - efi_native = !efi_64bit; |
649 | #else |
650 | efi_phys.systab = (efi_system_table_t *) |
651 | (boot_params.efi_info.efi_systab | |
652 | ((__u64)boot_params.efi_info.efi_systab_hi<<32)); |
653 | - efi_native = efi_64bit; |
654 | #endif |
655 | |
656 | if (efi_systab_init(efi_phys.systab)) { |
657 | @@ -709,7 +724,7 @@ void __init efi_init(void) |
658 | * that doesn't match the kernel 32/64-bit mode. |
659 | */ |
660 | |
661 | - if (!efi_native) |
662 | + if (!efi_is_native()) |
663 | pr_info("No EFI runtime due to 32/64-bit mismatch with kernel\n"); |
664 | else if (efi_runtime_init()) { |
665 | efi_enabled = 0; |
666 | @@ -721,7 +736,7 @@ void __init efi_init(void) |
667 | return; |
668 | } |
669 | #ifdef CONFIG_X86_32 |
670 | - if (efi_native) { |
671 | + if (efi_is_native()) { |
672 | x86_platform.get_wallclock = efi_get_time; |
673 | x86_platform.set_wallclock = efi_set_rtc_mmss; |
674 | } |
675 | @@ -787,8 +802,10 @@ void __init efi_enter_virtual_mode(void) |
676 | * non-native EFI |
677 | */ |
678 | |
679 | - if (!efi_native) |
680 | - goto out; |
681 | + if (!efi_is_native()) { |
682 | + efi_unmap_memmap(); |
683 | + return; |
684 | + } |
685 | |
686 | /* Merge contiguous regions of the same type and attribute */ |
687 | for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) { |
688 | @@ -878,13 +895,6 @@ void __init efi_enter_virtual_mode(void) |
689 | } |
690 | |
691 | /* |
692 | - * Thankfully, it does seem that no runtime services other than |
693 | - * SetVirtualAddressMap() will touch boot services code, so we can |
694 | - * get rid of it all at this point |
695 | - */ |
696 | - efi_free_boot_services(); |
697 | - |
698 | - /* |
699 | * Now that EFI is in virtual mode, update the function |
700 | * pointers in the runtime service table to the new virtual addresses. |
701 | * |
702 | @@ -907,9 +917,6 @@ void __init efi_enter_virtual_mode(void) |
703 | if (__supported_pte_mask & _PAGE_NX) |
704 | runtime_code_page_mkexec(); |
705 | |
706 | -out: |
707 | - early_iounmap(memmap.map, memmap.nr_map * memmap.desc_size); |
708 | - memmap.map = NULL; |
709 | kfree(new_memmap); |
710 | } |
711 | |
712 | diff --git a/drivers/bcma/main.c b/drivers/bcma/main.c |
713 | index 758af9c..0059e26 100644 |
714 | --- a/drivers/bcma/main.c |
715 | +++ b/drivers/bcma/main.c |
716 | @@ -141,9 +141,10 @@ static int bcma_register_cores(struct bcma_bus *bus) |
717 | |
718 | static void bcma_unregister_cores(struct bcma_bus *bus) |
719 | { |
720 | - struct bcma_device *core; |
721 | + struct bcma_device *core, *tmp; |
722 | |
723 | - list_for_each_entry(core, &bus->cores, list) { |
724 | + list_for_each_entry_safe(core, tmp, &bus->cores, list) { |
725 | + list_del(&core->list); |
726 | if (core->dev_registered) |
727 | device_unregister(&core->dev); |
728 | } |
729 | diff --git a/drivers/cpufreq/powernow-k8.c b/drivers/cpufreq/powernow-k8.c |
730 | index 1a40935..c671369 100644 |
731 | --- a/drivers/cpufreq/powernow-k8.c |
732 | +++ b/drivers/cpufreq/powernow-k8.c |
733 | @@ -1223,14 +1223,7 @@ static int powernowk8_target(struct cpufreq_policy *pol, |
734 | struct powernowk8_target_arg pta = { .pol = pol, .targfreq = targfreq, |
735 | .relation = relation }; |
736 | |
737 | - /* |
738 | - * Must run on @pol->cpu. cpufreq core is responsible for ensuring |
739 | - * that we're bound to the current CPU and pol->cpu stays online. |
740 | - */ |
741 | - if (smp_processor_id() == pol->cpu) |
742 | - return powernowk8_target_fn(&pta); |
743 | - else |
744 | - return work_on_cpu(pol->cpu, powernowk8_target_fn, &pta); |
745 | + return work_on_cpu(pol->cpu, powernowk8_target_fn, &pta); |
746 | } |
747 | |
748 | /* Driver entry point to verify the policy and range of frequencies */ |
749 | diff --git a/drivers/dma/imx-dma.c b/drivers/dma/imx-dma.c |
750 | index 5084975..8aa9113 100644 |
751 | --- a/drivers/dma/imx-dma.c |
752 | +++ b/drivers/dma/imx-dma.c |
753 | @@ -474,8 +474,10 @@ static int imxdma_xfer_desc(struct imxdma_desc *d) |
754 | slot = i; |
755 | break; |
756 | } |
757 | - if (slot < 0) |
758 | + if (slot < 0) { |
759 | + spin_unlock_irqrestore(&imxdma->lock, flags); |
760 | return -EBUSY; |
761 | + } |
762 | |
763 | imxdma->slots_2d[slot].xsr = d->x; |
764 | imxdma->slots_2d[slot].ysr = d->y; |
765 | diff --git a/drivers/dma/sirf-dma.c b/drivers/dma/sirf-dma.c |
766 | index 434ad31..c439489 100644 |
767 | --- a/drivers/dma/sirf-dma.c |
768 | +++ b/drivers/dma/sirf-dma.c |
769 | @@ -109,7 +109,7 @@ static void sirfsoc_dma_execute(struct sirfsoc_dma_chan *schan) |
770 | sdesc = list_first_entry(&schan->queued, struct sirfsoc_dma_desc, |
771 | node); |
772 | /* Move the first queued descriptor to active list */ |
773 | - list_move_tail(&schan->queued, &schan->active); |
774 | + list_move_tail(&sdesc->node, &schan->active); |
775 | |
776 | /* Start the DMA transfer */ |
777 | writel_relaxed(sdesc->width, sdma->base + SIRFSOC_DMA_WIDTH_0 + |
778 | @@ -428,7 +428,7 @@ static struct dma_async_tx_descriptor *sirfsoc_dma_prep_interleaved( |
779 | unsigned long iflags; |
780 | int ret; |
781 | |
782 | - if ((xt->dir != DMA_MEM_TO_DEV) || (xt->dir != DMA_DEV_TO_MEM)) { |
783 | + if ((xt->dir != DMA_MEM_TO_DEV) && (xt->dir != DMA_DEV_TO_MEM)) { |
784 | ret = -EINVAL; |
785 | goto err_dir; |
786 | } |
787 | diff --git a/drivers/extcon/extcon_class.c b/drivers/extcon/extcon_class.c |
788 | index f6419f9..7dcfb7c 100644 |
789 | --- a/drivers/extcon/extcon_class.c |
790 | +++ b/drivers/extcon/extcon_class.c |
791 | @@ -575,6 +575,10 @@ static void extcon_cleanup(struct extcon_dev *edev, bool skip) |
792 | kfree(edev->cables); |
793 | } |
794 | |
795 | +#if defined(CONFIG_ANDROID) |
796 | + if (switch_class) |
797 | + class_compat_remove_link(switch_class, edev->dev, NULL); |
798 | +#endif |
799 | device_unregister(edev->dev); |
800 | put_device(edev->dev); |
801 | } |
802 | @@ -821,6 +825,9 @@ module_init(extcon_class_init); |
803 | |
804 | static void __exit extcon_class_exit(void) |
805 | { |
806 | +#if defined(CONFIG_ANDROID) |
807 | + class_compat_unregister(switch_class); |
808 | +#endif |
809 | class_destroy(extcon_class); |
810 | } |
811 | module_exit(extcon_class_exit); |
812 | diff --git a/drivers/gpu/drm/radeon/evergreen_cs.c b/drivers/gpu/drm/radeon/evergreen_cs.c |
813 | index d883b20..e932810 100644 |
814 | --- a/drivers/gpu/drm/radeon/evergreen_cs.c |
815 | +++ b/drivers/gpu/drm/radeon/evergreen_cs.c |
816 | @@ -2829,6 +2829,7 @@ static bool evergreen_vm_reg_valid(u32 reg) |
817 | case CAYMAN_SQ_EX_ALLOC_TABLE_SLOTS: |
818 | return true; |
819 | default: |
820 | + DRM_ERROR("Invalid register 0x%x in CS\n", reg); |
821 | return false; |
822 | } |
823 | } |
824 | diff --git a/drivers/hv/channel.c b/drivers/hv/channel.c |
825 | index 4065374..f4c3d28 100644 |
826 | --- a/drivers/hv/channel.c |
827 | +++ b/drivers/hv/channel.c |
828 | @@ -146,14 +146,14 @@ int vmbus_open(struct vmbus_channel *newchannel, u32 send_ringbuffer_size, |
829 | |
830 | if (ret != 0) { |
831 | err = ret; |
832 | - goto errorout; |
833 | + goto error0; |
834 | } |
835 | |
836 | ret = hv_ringbuffer_init( |
837 | &newchannel->inbound, in, recv_ringbuffer_size); |
838 | if (ret != 0) { |
839 | err = ret; |
840 | - goto errorout; |
841 | + goto error0; |
842 | } |
843 | |
844 | |
845 | @@ -168,7 +168,7 @@ int vmbus_open(struct vmbus_channel *newchannel, u32 send_ringbuffer_size, |
846 | |
847 | if (ret != 0) { |
848 | err = ret; |
849 | - goto errorout; |
850 | + goto error0; |
851 | } |
852 | |
853 | /* Create and init the channel open message */ |
854 | @@ -177,7 +177,7 @@ int vmbus_open(struct vmbus_channel *newchannel, u32 send_ringbuffer_size, |
855 | GFP_KERNEL); |
856 | if (!open_info) { |
857 | err = -ENOMEM; |
858 | - goto errorout; |
859 | + goto error0; |
860 | } |
861 | |
862 | init_completion(&open_info->waitevent); |
863 | @@ -193,7 +193,7 @@ int vmbus_open(struct vmbus_channel *newchannel, u32 send_ringbuffer_size, |
864 | |
865 | if (userdatalen > MAX_USER_DEFINED_BYTES) { |
866 | err = -EINVAL; |
867 | - goto errorout; |
868 | + goto error0; |
869 | } |
870 | |
871 | if (userdatalen) |
872 | @@ -208,19 +208,18 @@ int vmbus_open(struct vmbus_channel *newchannel, u32 send_ringbuffer_size, |
873 | sizeof(struct vmbus_channel_open_channel)); |
874 | |
875 | if (ret != 0) |
876 | - goto cleanup; |
877 | + goto error1; |
878 | |
879 | t = wait_for_completion_timeout(&open_info->waitevent, 5*HZ); |
880 | if (t == 0) { |
881 | err = -ETIMEDOUT; |
882 | - goto errorout; |
883 | + goto error1; |
884 | } |
885 | |
886 | |
887 | if (open_info->response.open_result.status) |
888 | err = open_info->response.open_result.status; |
889 | |
890 | -cleanup: |
891 | spin_lock_irqsave(&vmbus_connection.channelmsg_lock, flags); |
892 | list_del(&open_info->msglistentry); |
893 | spin_unlock_irqrestore(&vmbus_connection.channelmsg_lock, flags); |
894 | @@ -228,9 +227,12 @@ cleanup: |
895 | kfree(open_info); |
896 | return err; |
897 | |
898 | -errorout: |
899 | - hv_ringbuffer_cleanup(&newchannel->outbound); |
900 | - hv_ringbuffer_cleanup(&newchannel->inbound); |
901 | +error1: |
902 | + spin_lock_irqsave(&vmbus_connection.channelmsg_lock, flags); |
903 | + list_del(&open_info->msglistentry); |
904 | + spin_unlock_irqrestore(&vmbus_connection.channelmsg_lock, flags); |
905 | + |
906 | +error0: |
907 | free_pages((unsigned long)out, |
908 | get_order(send_ringbuffer_size + recv_ringbuffer_size)); |
909 | kfree(open_info); |
910 | diff --git a/drivers/net/ethernet/tile/tilegx.c b/drivers/net/ethernet/tile/tilegx.c |
911 | index 4e2a162..4e98100 100644 |
912 | --- a/drivers/net/ethernet/tile/tilegx.c |
913 | +++ b/drivers/net/ethernet/tile/tilegx.c |
914 | @@ -1334,11 +1334,11 @@ static int tso_count_edescs(struct sk_buff *skb) |
915 | { |
916 | struct skb_shared_info *sh = skb_shinfo(skb); |
917 | unsigned int sh_len = skb_transport_offset(skb) + tcp_hdrlen(skb); |
918 | - unsigned int data_len = skb->data_len + skb->hdr_len - sh_len; |
919 | + unsigned int data_len = skb->len - sh_len; |
920 | unsigned int p_len = sh->gso_size; |
921 | long f_id = -1; /* id of the current fragment */ |
922 | - long f_size = skb->hdr_len; /* size of the current fragment */ |
923 | - long f_used = sh_len; /* bytes used from the current fragment */ |
924 | + long f_size = skb_headlen(skb) - sh_len; /* current fragment size */ |
925 | + long f_used = 0; /* bytes used from the current fragment */ |
926 | long n; /* size of the current piece of payload */ |
927 | int num_edescs = 0; |
928 | int segment; |
929 | @@ -1353,7 +1353,7 @@ static int tso_count_edescs(struct sk_buff *skb) |
930 | /* Advance as needed. */ |
931 | while (f_used >= f_size) { |
932 | f_id++; |
933 | - f_size = sh->frags[f_id].size; |
934 | + f_size = skb_frag_size(&sh->frags[f_id]); |
935 | f_used = 0; |
936 | } |
937 | |
938 | @@ -1384,13 +1384,13 @@ static void tso_headers_prepare(struct sk_buff *skb, unsigned char *headers, |
939 | struct iphdr *ih; |
940 | struct tcphdr *th; |
941 | unsigned int sh_len = skb_transport_offset(skb) + tcp_hdrlen(skb); |
942 | - unsigned int data_len = skb->data_len + skb->hdr_len - sh_len; |
943 | + unsigned int data_len = skb->len - sh_len; |
944 | unsigned char *data = skb->data; |
945 | unsigned int ih_off, th_off, p_len; |
946 | unsigned int isum_seed, tsum_seed, id, seq; |
947 | long f_id = -1; /* id of the current fragment */ |
948 | - long f_size = skb->hdr_len; /* size of the current fragment */ |
949 | - long f_used = sh_len; /* bytes used from the current fragment */ |
950 | + long f_size = skb_headlen(skb) - sh_len; /* current fragment size */ |
951 | + long f_used = 0; /* bytes used from the current fragment */ |
952 | long n; /* size of the current piece of payload */ |
953 | int segment; |
954 | |
955 | @@ -1405,7 +1405,7 @@ static void tso_headers_prepare(struct sk_buff *skb, unsigned char *headers, |
956 | isum_seed = ((0xFFFF - ih->check) + |
957 | (0xFFFF - ih->tot_len) + |
958 | (0xFFFF - ih->id)); |
959 | - tsum_seed = th->check + (0xFFFF ^ htons(sh_len + data_len)); |
960 | + tsum_seed = th->check + (0xFFFF ^ htons(skb->len)); |
961 | id = ntohs(ih->id); |
962 | seq = ntohl(th->seq); |
963 | |
964 | @@ -1444,7 +1444,7 @@ static void tso_headers_prepare(struct sk_buff *skb, unsigned char *headers, |
965 | /* Advance as needed. */ |
966 | while (f_used >= f_size) { |
967 | f_id++; |
968 | - f_size = sh->frags[f_id].size; |
969 | + f_size = skb_frag_size(&sh->frags[f_id]); |
970 | f_used = 0; |
971 | } |
972 | |
973 | @@ -1478,14 +1478,14 @@ static void tso_egress(struct net_device *dev, gxio_mpipe_equeue_t *equeue, |
974 | struct tile_net_priv *priv = netdev_priv(dev); |
975 | struct skb_shared_info *sh = skb_shinfo(skb); |
976 | unsigned int sh_len = skb_transport_offset(skb) + tcp_hdrlen(skb); |
977 | - unsigned int data_len = skb->data_len + skb->hdr_len - sh_len; |
978 | + unsigned int data_len = skb->len - sh_len; |
979 | unsigned int p_len = sh->gso_size; |
980 | gxio_mpipe_edesc_t edesc_head = { { 0 } }; |
981 | gxio_mpipe_edesc_t edesc_body = { { 0 } }; |
982 | long f_id = -1; /* id of the current fragment */ |
983 | - long f_size = skb->hdr_len; /* size of the current fragment */ |
984 | - long f_used = sh_len; /* bytes used from the current fragment */ |
985 | - void *f_data = skb->data; |
986 | + long f_size = skb_headlen(skb) - sh_len; /* current fragment size */ |
987 | + long f_used = 0; /* bytes used from the current fragment */ |
988 | + void *f_data = skb->data + sh_len; |
989 | long n; /* size of the current piece of payload */ |
990 | unsigned long tx_packets = 0, tx_bytes = 0; |
991 | unsigned int csum_start; |
992 | @@ -1516,15 +1516,18 @@ static void tso_egress(struct net_device *dev, gxio_mpipe_equeue_t *equeue, |
993 | |
994 | /* Egress the payload. */ |
995 | while (p_used < p_len) { |
996 | + void *va; |
997 | |
998 | /* Advance as needed. */ |
999 | while (f_used >= f_size) { |
1000 | f_id++; |
1001 | - f_size = sh->frags[f_id].size; |
1002 | - f_used = 0; |
1003 | + f_size = skb_frag_size(&sh->frags[f_id]); |
1004 | f_data = tile_net_frag_buf(&sh->frags[f_id]); |
1005 | + f_used = 0; |
1006 | } |
1007 | |
1008 | + va = f_data + f_used; |
1009 | + |
1010 | /* Use bytes from the current fragment. */ |
1011 | n = p_len - p_used; |
1012 | if (n > f_size - f_used) |
1013 | @@ -1533,7 +1536,7 @@ static void tso_egress(struct net_device *dev, gxio_mpipe_equeue_t *equeue, |
1014 | p_used += n; |
1015 | |
1016 | /* Egress a piece of the payload. */ |
1017 | - edesc_body.va = va_to_tile_io_addr(f_data) + f_used; |
1018 | + edesc_body.va = va_to_tile_io_addr(va); |
1019 | edesc_body.xfer_size = n; |
1020 | edesc_body.bound = !(p_used < p_len); |
1021 | gxio_mpipe_equeue_put_at(equeue, edesc_body, slot); |
1022 | diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c |
1023 | index a03de71..d012982 100644 |
1024 | --- a/drivers/net/usb/cdc_ether.c |
1025 | +++ b/drivers/net/usb/cdc_ether.c |
1026 | @@ -592,6 +592,32 @@ static const struct usb_device_id products [] = { |
1027 | .driver_info = 0, |
1028 | }, |
1029 | |
1030 | +/* Novatel USB551L and MC551 - handled by qmi_wwan */ |
1031 | +{ |
1032 | + .match_flags = USB_DEVICE_ID_MATCH_VENDOR |
1033 | + | USB_DEVICE_ID_MATCH_PRODUCT |
1034 | + | USB_DEVICE_ID_MATCH_INT_INFO, |
1035 | + .idVendor = NOVATEL_VENDOR_ID, |
1036 | + .idProduct = 0xB001, |
1037 | + .bInterfaceClass = USB_CLASS_COMM, |
1038 | + .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, |
1039 | + .bInterfaceProtocol = USB_CDC_PROTO_NONE, |
1040 | + .driver_info = 0, |
1041 | +}, |
1042 | + |
1043 | +/* Novatel E362 - handled by qmi_wwan */ |
1044 | +{ |
1045 | + .match_flags = USB_DEVICE_ID_MATCH_VENDOR |
1046 | + | USB_DEVICE_ID_MATCH_PRODUCT |
1047 | + | USB_DEVICE_ID_MATCH_INT_INFO, |
1048 | + .idVendor = NOVATEL_VENDOR_ID, |
1049 | + .idProduct = 0x9010, |
1050 | + .bInterfaceClass = USB_CLASS_COMM, |
1051 | + .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, |
1052 | + .bInterfaceProtocol = USB_CDC_PROTO_NONE, |
1053 | + .driver_info = 0, |
1054 | +}, |
1055 | + |
1056 | /* |
1057 | * WHITELIST!!! |
1058 | * |
1059 | @@ -604,21 +630,6 @@ static const struct usb_device_id products [] = { |
1060 | * because of bugs/quirks in a given product (like Zaurus, above). |
1061 | */ |
1062 | { |
1063 | - /* Novatel USB551L */ |
1064 | - /* This match must come *before* the generic CDC-ETHER match so that |
1065 | - * we get FLAG_WWAN set on the device, since it's descriptors are |
1066 | - * generic CDC-ETHER. |
1067 | - */ |
1068 | - .match_flags = USB_DEVICE_ID_MATCH_VENDOR |
1069 | - | USB_DEVICE_ID_MATCH_PRODUCT |
1070 | - | USB_DEVICE_ID_MATCH_INT_INFO, |
1071 | - .idVendor = NOVATEL_VENDOR_ID, |
1072 | - .idProduct = 0xB001, |
1073 | - .bInterfaceClass = USB_CLASS_COMM, |
1074 | - .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, |
1075 | - .bInterfaceProtocol = USB_CDC_PROTO_NONE, |
1076 | - .driver_info = (unsigned long)&wwan_info, |
1077 | -}, { |
1078 | /* ZTE (Vodafone) K3805-Z */ |
1079 | .match_flags = USB_DEVICE_ID_MATCH_VENDOR |
1080 | | USB_DEVICE_ID_MATCH_PRODUCT |
1081 | diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c |
1082 | index 3543c9e..3585f93 100644 |
1083 | --- a/drivers/net/usb/qmi_wwan.c |
1084 | +++ b/drivers/net/usb/qmi_wwan.c |
1085 | @@ -364,6 +364,20 @@ static const struct usb_device_id products[] = { |
1086 | USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 57), |
1087 | .driver_info = (unsigned long)&qmi_wwan_info, |
1088 | }, |
1089 | + { /* Novatel USB551L and MC551 */ |
1090 | + USB_DEVICE_AND_INTERFACE_INFO(0x1410, 0xb001, |
1091 | + USB_CLASS_COMM, |
1092 | + USB_CDC_SUBCLASS_ETHERNET, |
1093 | + USB_CDC_PROTO_NONE), |
1094 | + .driver_info = (unsigned long)&qmi_wwan_info, |
1095 | + }, |
1096 | + { /* Novatel E362 */ |
1097 | + USB_DEVICE_AND_INTERFACE_INFO(0x1410, 0x9010, |
1098 | + USB_CLASS_COMM, |
1099 | + USB_CDC_SUBCLASS_ETHERNET, |
1100 | + USB_CDC_PROTO_NONE), |
1101 | + .driver_info = (unsigned long)&qmi_wwan_info, |
1102 | + }, |
1103 | |
1104 | /* 2. Combined interface devices matching on class+protocol */ |
1105 | { /* Huawei E367 and possibly others in "Windows mode" */ |
1106 | diff --git a/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h b/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h |
1107 | index 89bf94d..6f7cf49 100644 |
1108 | --- a/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h |
1109 | +++ b/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h |
1110 | @@ -534,107 +534,107 @@ static const u32 ar9300_2p2_baseband_core[][2] = { |
1111 | |
1112 | static const u32 ar9300Modes_high_power_tx_gain_table_2p2[][5] = { |
1113 | /* Addr 5G_HT20 5G_HT40 2G_HT40 2G_HT20 */ |
1114 | - {0x0000a2dc, 0x000cfff0, 0x000cfff0, 0x03aaa352, 0x03aaa352}, |
1115 | - {0x0000a2e0, 0x000f0000, 0x000f0000, 0x03ccc584, 0x03ccc584}, |
1116 | - {0x0000a2e4, 0x03f00000, 0x03f00000, 0x03f0f800, 0x03f0f800}, |
1117 | + {0x0000a2dc, 0x00033800, 0x00033800, 0x03aaa352, 0x03aaa352}, |
1118 | + {0x0000a2e0, 0x0003c000, 0x0003c000, 0x03ccc584, 0x03ccc584}, |
1119 | + {0x0000a2e4, 0x03fc0000, 0x03fc0000, 0x03f0f800, 0x03f0f800}, |
1120 | {0x0000a2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000}, |
1121 | {0x0000a410, 0x000050d9, 0x000050d9, 0x000050d9, 0x000050d9}, |
1122 | {0x0000a500, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, |
1123 | {0x0000a504, 0x06000003, 0x06000003, 0x04000002, 0x04000002}, |
1124 | {0x0000a508, 0x0a000020, 0x0a000020, 0x08000004, 0x08000004}, |
1125 | {0x0000a50c, 0x10000023, 0x10000023, 0x0b000200, 0x0b000200}, |
1126 | - {0x0000a510, 0x15000028, 0x15000028, 0x0f000202, 0x0f000202}, |
1127 | - {0x0000a514, 0x1b00002b, 0x1b00002b, 0x12000400, 0x12000400}, |
1128 | - {0x0000a518, 0x1f020028, 0x1f020028, 0x16000402, 0x16000402}, |
1129 | - {0x0000a51c, 0x2502002b, 0x2502002b, 0x19000404, 0x19000404}, |
1130 | - {0x0000a520, 0x2a04002a, 0x2a04002a, 0x1c000603, 0x1c000603}, |
1131 | - {0x0000a524, 0x2e06002a, 0x2e06002a, 0x21000a02, 0x21000a02}, |
1132 | - {0x0000a528, 0x3302202d, 0x3302202d, 0x25000a04, 0x25000a04}, |
1133 | - {0x0000a52c, 0x3804202c, 0x3804202c, 0x28000a20, 0x28000a20}, |
1134 | - {0x0000a530, 0x3c06202c, 0x3c06202c, 0x2c000e20, 0x2c000e20}, |
1135 | - {0x0000a534, 0x4108202d, 0x4108202d, 0x30000e22, 0x30000e22}, |
1136 | - {0x0000a538, 0x4506402d, 0x4506402d, 0x34000e24, 0x34000e24}, |
1137 | - {0x0000a53c, 0x4906222d, 0x4906222d, 0x38001640, 0x38001640}, |
1138 | - {0x0000a540, 0x4d062231, 0x4d062231, 0x3c001660, 0x3c001660}, |
1139 | - {0x0000a544, 0x50082231, 0x50082231, 0x3f001861, 0x3f001861}, |
1140 | - {0x0000a548, 0x5608422e, 0x5608422e, 0x43001a81, 0x43001a81}, |
1141 | - {0x0000a54c, 0x5a08442e, 0x5a08442e, 0x47001a83, 0x47001a83}, |
1142 | - {0x0000a550, 0x5e0a4431, 0x5e0a4431, 0x4a001c84, 0x4a001c84}, |
1143 | - {0x0000a554, 0x640a4432, 0x640a4432, 0x4e001ce3, 0x4e001ce3}, |
1144 | - {0x0000a558, 0x680a4434, 0x680a4434, 0x52001ce5, 0x52001ce5}, |
1145 | - {0x0000a55c, 0x6c0a6434, 0x6c0a6434, 0x56001ce9, 0x56001ce9}, |
1146 | - {0x0000a560, 0x6f0a6633, 0x6f0a6633, 0x5a001ceb, 0x5a001ceb}, |
1147 | - {0x0000a564, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec}, |
1148 | - {0x0000a568, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec}, |
1149 | - {0x0000a56c, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec}, |
1150 | - {0x0000a570, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec}, |
1151 | - {0x0000a574, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec}, |
1152 | - {0x0000a578, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec}, |
1153 | - {0x0000a57c, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec}, |
1154 | + {0x0000a510, 0x16000220, 0x16000220, 0x0f000202, 0x0f000202}, |
1155 | + {0x0000a514, 0x1c000223, 0x1c000223, 0x12000400, 0x12000400}, |
1156 | + {0x0000a518, 0x21002220, 0x21002220, 0x16000402, 0x16000402}, |
1157 | + {0x0000a51c, 0x27002223, 0x27002223, 0x19000404, 0x19000404}, |
1158 | + {0x0000a520, 0x2b022220, 0x2b022220, 0x1c000603, 0x1c000603}, |
1159 | + {0x0000a524, 0x2f022222, 0x2f022222, 0x21000a02, 0x21000a02}, |
1160 | + {0x0000a528, 0x34022225, 0x34022225, 0x25000a04, 0x25000a04}, |
1161 | + {0x0000a52c, 0x3a02222a, 0x3a02222a, 0x28000a20, 0x28000a20}, |
1162 | + {0x0000a530, 0x3e02222c, 0x3e02222c, 0x2c000e20, 0x2c000e20}, |
1163 | + {0x0000a534, 0x4202242a, 0x4202242a, 0x30000e22, 0x30000e22}, |
1164 | + {0x0000a538, 0x4702244a, 0x4702244a, 0x34000e24, 0x34000e24}, |
1165 | + {0x0000a53c, 0x4b02244c, 0x4b02244c, 0x38001640, 0x38001640}, |
1166 | + {0x0000a540, 0x4e02246c, 0x4e02246c, 0x3c001660, 0x3c001660}, |
1167 | + {0x0000a544, 0x52022470, 0x52022470, 0x3f001861, 0x3f001861}, |
1168 | + {0x0000a548, 0x55022490, 0x55022490, 0x43001a81, 0x43001a81}, |
1169 | + {0x0000a54c, 0x59022492, 0x59022492, 0x47001a83, 0x47001a83}, |
1170 | + {0x0000a550, 0x5d022692, 0x5d022692, 0x4a001c84, 0x4a001c84}, |
1171 | + {0x0000a554, 0x61022892, 0x61022892, 0x4e001ce3, 0x4e001ce3}, |
1172 | + {0x0000a558, 0x65024890, 0x65024890, 0x52001ce5, 0x52001ce5}, |
1173 | + {0x0000a55c, 0x69024892, 0x69024892, 0x56001ce9, 0x56001ce9}, |
1174 | + {0x0000a560, 0x6e024c92, 0x6e024c92, 0x5a001ceb, 0x5a001ceb}, |
1175 | + {0x0000a564, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec}, |
1176 | + {0x0000a568, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec}, |
1177 | + {0x0000a56c, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec}, |
1178 | + {0x0000a570, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec}, |
1179 | + {0x0000a574, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec}, |
1180 | + {0x0000a578, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec}, |
1181 | + {0x0000a57c, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec}, |
1182 | {0x0000a580, 0x00800000, 0x00800000, 0x00800000, 0x00800000}, |
1183 | {0x0000a584, 0x06800003, 0x06800003, 0x04800002, 0x04800002}, |
1184 | {0x0000a588, 0x0a800020, 0x0a800020, 0x08800004, 0x08800004}, |
1185 | {0x0000a58c, 0x10800023, 0x10800023, 0x0b800200, 0x0b800200}, |
1186 | - {0x0000a590, 0x15800028, 0x15800028, 0x0f800202, 0x0f800202}, |
1187 | - {0x0000a594, 0x1b80002b, 0x1b80002b, 0x12800400, 0x12800400}, |
1188 | - {0x0000a598, 0x1f820028, 0x1f820028, 0x16800402, 0x16800402}, |
1189 | - {0x0000a59c, 0x2582002b, 0x2582002b, 0x19800404, 0x19800404}, |
1190 | - {0x0000a5a0, 0x2a84002a, 0x2a84002a, 0x1c800603, 0x1c800603}, |
1191 | - {0x0000a5a4, 0x2e86002a, 0x2e86002a, 0x21800a02, 0x21800a02}, |
1192 | - {0x0000a5a8, 0x3382202d, 0x3382202d, 0x25800a04, 0x25800a04}, |
1193 | - {0x0000a5ac, 0x3884202c, 0x3884202c, 0x28800a20, 0x28800a20}, |
1194 | - {0x0000a5b0, 0x3c86202c, 0x3c86202c, 0x2c800e20, 0x2c800e20}, |
1195 | - {0x0000a5b4, 0x4188202d, 0x4188202d, 0x30800e22, 0x30800e22}, |
1196 | - {0x0000a5b8, 0x4586402d, 0x4586402d, 0x34800e24, 0x34800e24}, |
1197 | - {0x0000a5bc, 0x4986222d, 0x4986222d, 0x38801640, 0x38801640}, |
1198 | - {0x0000a5c0, 0x4d862231, 0x4d862231, 0x3c801660, 0x3c801660}, |
1199 | - {0x0000a5c4, 0x50882231, 0x50882231, 0x3f801861, 0x3f801861}, |
1200 | - {0x0000a5c8, 0x5688422e, 0x5688422e, 0x43801a81, 0x43801a81}, |
1201 | - {0x0000a5cc, 0x5a88442e, 0x5a88442e, 0x47801a83, 0x47801a83}, |
1202 | - {0x0000a5d0, 0x5e8a4431, 0x5e8a4431, 0x4a801c84, 0x4a801c84}, |
1203 | - {0x0000a5d4, 0x648a4432, 0x648a4432, 0x4e801ce3, 0x4e801ce3}, |
1204 | - {0x0000a5d8, 0x688a4434, 0x688a4434, 0x52801ce5, 0x52801ce5}, |
1205 | - {0x0000a5dc, 0x6c8a6434, 0x6c8a6434, 0x56801ce9, 0x56801ce9}, |
1206 | - {0x0000a5e0, 0x6f8a6633, 0x6f8a6633, 0x5a801ceb, 0x5a801ceb}, |
1207 | - {0x0000a5e4, 0x738c6634, 0x738c6634, 0x5d801eec, 0x5d801eec}, |
1208 | - {0x0000a5e8, 0x738c6634, 0x738c6634, 0x5d801eec, 0x5d801eec}, |
1209 | - {0x0000a5ec, 0x738c6634, 0x738c6634, 0x5d801eec, 0x5d801eec}, |
1210 | - {0x0000a5f0, 0x738c6634, 0x738c6634, 0x5d801eec, 0x5d801eec}, |
1211 | - {0x0000a5f4, 0x738c6634, 0x738c6634, 0x5d801eec, 0x5d801eec}, |
1212 | - {0x0000a5f8, 0x738c6634, 0x738c6634, 0x5d801eec, 0x5d801eec}, |
1213 | - {0x0000a5fc, 0x738c6634, 0x738c6634, 0x5d801eec, 0x5d801eec}, |
1214 | + {0x0000a590, 0x16800220, 0x16800220, 0x0f800202, 0x0f800202}, |
1215 | + {0x0000a594, 0x1c800223, 0x1c800223, 0x12800400, 0x12800400}, |
1216 | + {0x0000a598, 0x21802220, 0x21802220, 0x16800402, 0x16800402}, |
1217 | + {0x0000a59c, 0x27802223, 0x27802223, 0x19800404, 0x19800404}, |
1218 | + {0x0000a5a0, 0x2b822220, 0x2b822220, 0x1c800603, 0x1c800603}, |
1219 | + {0x0000a5a4, 0x2f822222, 0x2f822222, 0x21800a02, 0x21800a02}, |
1220 | + {0x0000a5a8, 0x34822225, 0x34822225, 0x25800a04, 0x25800a04}, |
1221 | + {0x0000a5ac, 0x3a82222a, 0x3a82222a, 0x28800a20, 0x28800a20}, |
1222 | + {0x0000a5b0, 0x3e82222c, 0x3e82222c, 0x2c800e20, 0x2c800e20}, |
1223 | + {0x0000a5b4, 0x4282242a, 0x4282242a, 0x30800e22, 0x30800e22}, |
1224 | + {0x0000a5b8, 0x4782244a, 0x4782244a, 0x34800e24, 0x34800e24}, |
1225 | + {0x0000a5bc, 0x4b82244c, 0x4b82244c, 0x38801640, 0x38801640}, |
1226 | + {0x0000a5c0, 0x4e82246c, 0x4e82246c, 0x3c801660, 0x3c801660}, |
1227 | + {0x0000a5c4, 0x52822470, 0x52822470, 0x3f801861, 0x3f801861}, |
1228 | + {0x0000a5c8, 0x55822490, 0x55822490, 0x43801a81, 0x43801a81}, |
1229 | + {0x0000a5cc, 0x59822492, 0x59822492, 0x47801a83, 0x47801a83}, |
1230 | + {0x0000a5d0, 0x5d822692, 0x5d822692, 0x4a801c84, 0x4a801c84}, |
1231 | + {0x0000a5d4, 0x61822892, 0x61822892, 0x4e801ce3, 0x4e801ce3}, |
1232 | + {0x0000a5d8, 0x65824890, 0x65824890, 0x52801ce5, 0x52801ce5}, |
1233 | + {0x0000a5dc, 0x69824892, 0x69824892, 0x56801ce9, 0x56801ce9}, |
1234 | + {0x0000a5e0, 0x6e824c92, 0x6e824c92, 0x5a801ceb, 0x5a801ceb}, |
1235 | + {0x0000a5e4, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec}, |
1236 | + {0x0000a5e8, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec}, |
1237 | + {0x0000a5ec, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec}, |
1238 | + {0x0000a5f0, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec}, |
1239 | + {0x0000a5f4, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec}, |
1240 | + {0x0000a5f8, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec}, |
1241 | + {0x0000a5fc, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec}, |
1242 | {0x0000a600, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, |
1243 | {0x0000a604, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, |
1244 | - {0x0000a608, 0x01804601, 0x01804601, 0x00000000, 0x00000000}, |
1245 | - {0x0000a60c, 0x01804601, 0x01804601, 0x00000000, 0x00000000}, |
1246 | - {0x0000a610, 0x01804601, 0x01804601, 0x00000000, 0x00000000}, |
1247 | - {0x0000a614, 0x01804601, 0x01804601, 0x01404000, 0x01404000}, |
1248 | - {0x0000a618, 0x01804601, 0x01804601, 0x01404501, 0x01404501}, |
1249 | - {0x0000a61c, 0x01804601, 0x01804601, 0x02008501, 0x02008501}, |
1250 | - {0x0000a620, 0x03408d02, 0x03408d02, 0x0280ca03, 0x0280ca03}, |
1251 | - {0x0000a624, 0x0300cc03, 0x0300cc03, 0x03010c04, 0x03010c04}, |
1252 | - {0x0000a628, 0x03410d04, 0x03410d04, 0x04014c04, 0x04014c04}, |
1253 | - {0x0000a62c, 0x03410d04, 0x03410d04, 0x04015005, 0x04015005}, |
1254 | - {0x0000a630, 0x03410d04, 0x03410d04, 0x04015005, 0x04015005}, |
1255 | - {0x0000a634, 0x03410d04, 0x03410d04, 0x04015005, 0x04015005}, |
1256 | - {0x0000a638, 0x03410d04, 0x03410d04, 0x04015005, 0x04015005}, |
1257 | - {0x0000a63c, 0x03410d04, 0x03410d04, 0x04015005, 0x04015005}, |
1258 | - {0x0000b2dc, 0x000cfff0, 0x000cfff0, 0x03aaa352, 0x03aaa352}, |
1259 | - {0x0000b2e0, 0x000f0000, 0x000f0000, 0x03ccc584, 0x03ccc584}, |
1260 | - {0x0000b2e4, 0x03f00000, 0x03f00000, 0x03f0f800, 0x03f0f800}, |
1261 | + {0x0000a608, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, |
1262 | + {0x0000a60c, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, |
1263 | + {0x0000a610, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, |
1264 | + {0x0000a614, 0x02004000, 0x02004000, 0x01404000, 0x01404000}, |
1265 | + {0x0000a618, 0x02004801, 0x02004801, 0x01404501, 0x01404501}, |
1266 | + {0x0000a61c, 0x02808a02, 0x02808a02, 0x02008501, 0x02008501}, |
1267 | + {0x0000a620, 0x0380ce03, 0x0380ce03, 0x0280ca03, 0x0280ca03}, |
1268 | + {0x0000a624, 0x04411104, 0x04411104, 0x03010c04, 0x03010c04}, |
1269 | + {0x0000a628, 0x04411104, 0x04411104, 0x04014c04, 0x04014c04}, |
1270 | + {0x0000a62c, 0x04411104, 0x04411104, 0x04015005, 0x04015005}, |
1271 | + {0x0000a630, 0x04411104, 0x04411104, 0x04015005, 0x04015005}, |
1272 | + {0x0000a634, 0x04411104, 0x04411104, 0x04015005, 0x04015005}, |
1273 | + {0x0000a638, 0x04411104, 0x04411104, 0x04015005, 0x04015005}, |
1274 | + {0x0000a63c, 0x04411104, 0x04411104, 0x04015005, 0x04015005}, |
1275 | + {0x0000b2dc, 0x00033800, 0x00033800, 0x03aaa352, 0x03aaa352}, |
1276 | + {0x0000b2e0, 0x0003c000, 0x0003c000, 0x03ccc584, 0x03ccc584}, |
1277 | + {0x0000b2e4, 0x03fc0000, 0x03fc0000, 0x03f0f800, 0x03f0f800}, |
1278 | {0x0000b2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000}, |
1279 | - {0x0000c2dc, 0x000cfff0, 0x000cfff0, 0x03aaa352, 0x03aaa352}, |
1280 | - {0x0000c2e0, 0x000f0000, 0x000f0000, 0x03ccc584, 0x03ccc584}, |
1281 | - {0x0000c2e4, 0x03f00000, 0x03f00000, 0x03f0f800, 0x03f0f800}, |
1282 | + {0x0000c2dc, 0x00033800, 0x00033800, 0x03aaa352, 0x03aaa352}, |
1283 | + {0x0000c2e0, 0x0003c000, 0x0003c000, 0x03ccc584, 0x03ccc584}, |
1284 | + {0x0000c2e4, 0x03fc0000, 0x03fc0000, 0x03f0f800, 0x03f0f800}, |
1285 | {0x0000c2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000}, |
1286 | {0x00016044, 0x012492d4, 0x012492d4, 0x012492d4, 0x012492d4}, |
1287 | - {0x00016048, 0x61200001, 0x61200001, 0x66480001, 0x66480001}, |
1288 | + {0x00016048, 0x66480001, 0x66480001, 0x66480001, 0x66480001}, |
1289 | {0x00016068, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c}, |
1290 | {0x00016444, 0x012492d4, 0x012492d4, 0x012492d4, 0x012492d4}, |
1291 | - {0x00016448, 0x61200001, 0x61200001, 0x66480001, 0x66480001}, |
1292 | + {0x00016448, 0x66480001, 0x66480001, 0x66480001, 0x66480001}, |
1293 | {0x00016468, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c}, |
1294 | {0x00016844, 0x012492d4, 0x012492d4, 0x012492d4, 0x012492d4}, |
1295 | - {0x00016848, 0x61200001, 0x61200001, 0x66480001, 0x66480001}, |
1296 | + {0x00016848, 0x66480001, 0x66480001, 0x66480001, 0x66480001}, |
1297 | {0x00016868, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c}, |
1298 | }; |
1299 | |
1300 | diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c |
1301 | index a140165..46d9d4e 100644 |
1302 | --- a/drivers/net/wireless/b43/main.c |
1303 | +++ b/drivers/net/wireless/b43/main.c |
1304 | @@ -5374,6 +5374,8 @@ static void b43_bcma_remove(struct bcma_device *core) |
1305 | cancel_work_sync(&wldev->restart_work); |
1306 | |
1307 | B43_WARN_ON(!wl); |
1308 | + if (!wldev->fw.ucode.data) |
1309 | + return; /* NULL if firmware never loaded */ |
1310 | if (wl->current_dev == wldev && wl->hw_registred) { |
1311 | b43_leds_stop(wldev); |
1312 | ieee80211_unregister_hw(wl->hw); |
1313 | @@ -5448,6 +5450,8 @@ static void b43_ssb_remove(struct ssb_device *sdev) |
1314 | cancel_work_sync(&wldev->restart_work); |
1315 | |
1316 | B43_WARN_ON(!wl); |
1317 | + if (!wldev->fw.ucode.data) |
1318 | + return; /* NULL if firmware never loaded */ |
1319 | if (wl->current_dev == wldev && wl->hw_registred) { |
1320 | b43_leds_stop(wldev); |
1321 | ieee80211_unregister_hw(wl->hw); |
1322 | diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c |
1323 | index 0df4591..6d1754a 100644 |
1324 | --- a/drivers/net/wireless/ipw2x00/ipw2200.c |
1325 | +++ b/drivers/net/wireless/ipw2x00/ipw2200.c |
1326 | @@ -10479,7 +10479,7 @@ static void ipw_handle_promiscuous_tx(struct ipw_priv *priv, |
1327 | } else |
1328 | len = src->len; |
1329 | |
1330 | - dst = alloc_skb(len + sizeof(*rt_hdr), GFP_ATOMIC); |
1331 | + dst = alloc_skb(len + sizeof(*rt_hdr) + sizeof(u16)*2, GFP_ATOMIC); |
1332 | if (!dst) |
1333 | continue; |
1334 | |
1335 | diff --git a/drivers/net/wireless/iwlwifi/dvm/devices.c b/drivers/net/wireless/iwlwifi/dvm/devices.c |
1336 | index 349c205..da58620 100644 |
1337 | --- a/drivers/net/wireless/iwlwifi/dvm/devices.c |
1338 | +++ b/drivers/net/wireless/iwlwifi/dvm/devices.c |
1339 | @@ -518,7 +518,7 @@ static int iwl6000_hw_channel_switch(struct iwl_priv *priv, |
1340 | * See iwlagn_mac_channel_switch. |
1341 | */ |
1342 | struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; |
1343 | - struct iwl6000_channel_switch_cmd cmd; |
1344 | + struct iwl6000_channel_switch_cmd *cmd; |
1345 | u32 switch_time_in_usec, ucode_switch_time; |
1346 | u16 ch; |
1347 | u32 tsf_low; |
1348 | @@ -527,18 +527,25 @@ static int iwl6000_hw_channel_switch(struct iwl_priv *priv, |
1349 | struct ieee80211_vif *vif = ctx->vif; |
1350 | struct iwl_host_cmd hcmd = { |
1351 | .id = REPLY_CHANNEL_SWITCH, |
1352 | - .len = { sizeof(cmd), }, |
1353 | + .len = { sizeof(*cmd), }, |
1354 | .flags = CMD_SYNC, |
1355 | - .data = { &cmd, }, |
1356 | + .dataflags[0] = IWL_HCMD_DFL_NOCOPY, |
1357 | }; |
1358 | + int err; |
1359 | |
1360 | - cmd.band = priv->band == IEEE80211_BAND_2GHZ; |
1361 | + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); |
1362 | + if (!cmd) |
1363 | + return -ENOMEM; |
1364 | + |
1365 | + hcmd.data[0] = cmd; |
1366 | + |
1367 | + cmd->band = priv->band == IEEE80211_BAND_2GHZ; |
1368 | ch = ch_switch->channel->hw_value; |
1369 | IWL_DEBUG_11H(priv, "channel switch from %u to %u\n", |
1370 | ctx->active.channel, ch); |
1371 | - cmd.channel = cpu_to_le16(ch); |
1372 | - cmd.rxon_flags = ctx->staging.flags; |
1373 | - cmd.rxon_filter_flags = ctx->staging.filter_flags; |
1374 | + cmd->channel = cpu_to_le16(ch); |
1375 | + cmd->rxon_flags = ctx->staging.flags; |
1376 | + cmd->rxon_filter_flags = ctx->staging.filter_flags; |
1377 | switch_count = ch_switch->count; |
1378 | tsf_low = ch_switch->timestamp & 0x0ffffffff; |
1379 | /* |
1380 | @@ -554,23 +561,25 @@ static int iwl6000_hw_channel_switch(struct iwl_priv *priv, |
1381 | switch_count = 0; |
1382 | } |
1383 | if (switch_count <= 1) |
1384 | - cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time); |
1385 | + cmd->switch_time = cpu_to_le32(priv->ucode_beacon_time); |
1386 | else { |
1387 | switch_time_in_usec = |
1388 | vif->bss_conf.beacon_int * switch_count * TIME_UNIT; |
1389 | ucode_switch_time = iwl_usecs_to_beacons(priv, |
1390 | switch_time_in_usec, |
1391 | beacon_interval); |
1392 | - cmd.switch_time = iwl_add_beacon_time(priv, |
1393 | - priv->ucode_beacon_time, |
1394 | - ucode_switch_time, |
1395 | - beacon_interval); |
1396 | + cmd->switch_time = iwl_add_beacon_time(priv, |
1397 | + priv->ucode_beacon_time, |
1398 | + ucode_switch_time, |
1399 | + beacon_interval); |
1400 | } |
1401 | IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n", |
1402 | - cmd.switch_time); |
1403 | - cmd.expect_beacon = ch_switch->channel->flags & IEEE80211_CHAN_RADAR; |
1404 | + cmd->switch_time); |
1405 | + cmd->expect_beacon = ch_switch->channel->flags & IEEE80211_CHAN_RADAR; |
1406 | |
1407 | - return iwl_dvm_send_cmd(priv, &hcmd); |
1408 | + err = iwl_dvm_send_cmd(priv, &hcmd); |
1409 | + kfree(cmd); |
1410 | + return err; |
1411 | } |
1412 | |
1413 | struct iwl_lib_ops iwl6000_lib = { |
1414 | diff --git a/drivers/rtc/rtc-imxdi.c b/drivers/rtc/rtc-imxdi.c |
1415 | index 891cd6c..4eed510 100644 |
1416 | --- a/drivers/rtc/rtc-imxdi.c |
1417 | +++ b/drivers/rtc/rtc-imxdi.c |
1418 | @@ -392,6 +392,8 @@ static int dryice_rtc_probe(struct platform_device *pdev) |
1419 | if (imxdi->ioaddr == NULL) |
1420 | return -ENOMEM; |
1421 | |
1422 | + spin_lock_init(&imxdi->irq_lock); |
1423 | + |
1424 | imxdi->irq = platform_get_irq(pdev, 0); |
1425 | if (imxdi->irq < 0) |
1426 | return imxdi->irq; |
1427 | diff --git a/drivers/staging/android/binder.c b/drivers/staging/android/binder.c |
1428 | index 574e992..467d493 100644 |
1429 | --- a/drivers/staging/android/binder.c |
1430 | +++ b/drivers/staging/android/binder.c |
1431 | @@ -655,7 +655,7 @@ static int binder_update_page_range(struct binder_proc *proc, int allocate, |
1432 | page = &proc->pages[(page_addr - proc->buffer) / PAGE_SIZE]; |
1433 | |
1434 | BUG_ON(*page); |
1435 | - *page = alloc_page(GFP_KERNEL | __GFP_ZERO); |
1436 | + *page = alloc_page(GFP_KERNEL | __GFP_HIGHMEM | __GFP_ZERO); |
1437 | if (*page == NULL) { |
1438 | pr_err("binder: %d: binder_alloc_buf failed " |
1439 | "for page at %p\n", proc->pid, page_addr); |
1440 | @@ -2507,14 +2507,38 @@ static void binder_release_work(struct list_head *list) |
1441 | struct binder_transaction *t; |
1442 | |
1443 | t = container_of(w, struct binder_transaction, work); |
1444 | - if (t->buffer->target_node && !(t->flags & TF_ONE_WAY)) |
1445 | + if (t->buffer->target_node && |
1446 | + !(t->flags & TF_ONE_WAY)) { |
1447 | binder_send_failed_reply(t, BR_DEAD_REPLY); |
1448 | + } else { |
1449 | + binder_debug(BINDER_DEBUG_DEAD_TRANSACTION, |
1450 | + "binder: undelivered transaction %d\n", |
1451 | + t->debug_id); |
1452 | + t->buffer->transaction = NULL; |
1453 | + kfree(t); |
1454 | + binder_stats_deleted(BINDER_STAT_TRANSACTION); |
1455 | + } |
1456 | } break; |
1457 | case BINDER_WORK_TRANSACTION_COMPLETE: { |
1458 | + binder_debug(BINDER_DEBUG_DEAD_TRANSACTION, |
1459 | + "binder: undelivered TRANSACTION_COMPLETE\n"); |
1460 | kfree(w); |
1461 | binder_stats_deleted(BINDER_STAT_TRANSACTION_COMPLETE); |
1462 | } break; |
1463 | + case BINDER_WORK_DEAD_BINDER_AND_CLEAR: |
1464 | + case BINDER_WORK_CLEAR_DEATH_NOTIFICATION: { |
1465 | + struct binder_ref_death *death; |
1466 | + |
1467 | + death = container_of(w, struct binder_ref_death, work); |
1468 | + binder_debug(BINDER_DEBUG_DEAD_TRANSACTION, |
1469 | + "binder: undelivered death notification, %p\n", |
1470 | + death->cookie); |
1471 | + kfree(death); |
1472 | + binder_stats_deleted(BINDER_STAT_DEATH); |
1473 | + } break; |
1474 | default: |
1475 | + pr_err("binder: unexpected work type, %d, not freed\n", |
1476 | + w->type); |
1477 | break; |
1478 | } |
1479 | } |
1480 | @@ -2984,6 +3008,7 @@ static void binder_deferred_release(struct binder_proc *proc) |
1481 | nodes++; |
1482 | rb_erase(&node->rb_node, &proc->nodes); |
1483 | list_del_init(&node->work.entry); |
1484 | + binder_release_work(&node->async_todo); |
1485 | if (hlist_empty(&node->refs)) { |
1486 | kfree(node); |
1487 | binder_stats_deleted(BINDER_STAT_NODE); |
1488 | @@ -3022,6 +3047,7 @@ static void binder_deferred_release(struct binder_proc *proc) |
1489 | binder_delete_ref(ref); |
1490 | } |
1491 | binder_release_work(&proc->todo); |
1492 | + binder_release_work(&proc->delivered_death); |
1493 | buffers = 0; |
1494 | |
1495 | while ((n = rb_first(&proc->allocated_buffers))) { |
1496 | diff --git a/drivers/staging/comedi/drivers/amplc_dio200.c b/drivers/staging/comedi/drivers/amplc_dio200.c |
1497 | index cc8931f..aee22fd 100644 |
1498 | --- a/drivers/staging/comedi/drivers/amplc_dio200.c |
1499 | +++ b/drivers/staging/comedi/drivers/amplc_dio200.c |
1500 | @@ -1429,6 +1429,8 @@ static void dio200_detach(struct comedi_device *dev) |
1501 | const struct dio200_layout_struct *layout; |
1502 | unsigned n; |
1503 | |
1504 | + if (!thisboard) |
1505 | + return; |
1506 | if (dev->irq) |
1507 | free_irq(dev->irq, dev); |
1508 | if (dev->subdevices) { |
1509 | diff --git a/drivers/staging/comedi/drivers/amplc_pc236.c b/drivers/staging/comedi/drivers/amplc_pc236.c |
1510 | index f502879..b46e663 100644 |
1511 | --- a/drivers/staging/comedi/drivers/amplc_pc236.c |
1512 | +++ b/drivers/staging/comedi/drivers/amplc_pc236.c |
1513 | @@ -577,10 +577,12 @@ static int __devinit pc236_attach_pci(struct comedi_device *dev, |
1514 | |
1515 | static void pc236_detach(struct comedi_device *dev) |
1516 | { |
1517 | - struct pc236_private *devpriv = dev->private; |
1518 | + const struct pc236_board *thisboard = comedi_board(dev); |
1519 | struct pci_dev *pcidev = comedi_to_pci_dev(dev); |
1520 | |
1521 | - if (devpriv) |
1522 | + if (!thisboard) |
1523 | + return; |
1524 | + if (dev->iobase) |
1525 | pc236_intr_disable(dev); |
1526 | if (dev->irq) |
1527 | free_irq(dev->irq, dev); |
1528 | diff --git a/drivers/staging/comedi/drivers/amplc_pc263.c b/drivers/staging/comedi/drivers/amplc_pc263.c |
1529 | index 8191c4e..8c0fbd1 100644 |
1530 | --- a/drivers/staging/comedi/drivers/amplc_pc263.c |
1531 | +++ b/drivers/staging/comedi/drivers/amplc_pc263.c |
1532 | @@ -310,8 +310,11 @@ static int __devinit pc263_attach_pci(struct comedi_device *dev, |
1533 | |
1534 | static void pc263_detach(struct comedi_device *dev) |
1535 | { |
1536 | + const struct pc263_board *thisboard = comedi_board(dev); |
1537 | struct pci_dev *pcidev = comedi_to_pci_dev(dev); |
1538 | |
1539 | + if (!thisboard) |
1540 | + return; |
1541 | if (pcidev) { |
1542 | if (dev->iobase) |
1543 | comedi_pci_disable(pcidev); |
1544 | diff --git a/drivers/staging/comedi/drivers/das08.c b/drivers/staging/comedi/drivers/das08.c |
1545 | index 67a914a..d893e3b 100644 |
1546 | --- a/drivers/staging/comedi/drivers/das08.c |
1547 | +++ b/drivers/staging/comedi/drivers/das08.c |
1548 | @@ -1028,6 +1028,8 @@ static void __maybe_unused das08_detach(struct comedi_device *dev) |
1549 | const struct das08_board_struct *thisboard = comedi_board(dev); |
1550 | struct das08_private_struct *devpriv = dev->private; |
1551 | |
1552 | + if (!thisboard) |
1553 | + return; |
1554 | das08_common_detach(dev); |
1555 | if (IS_ENABLED(CONFIG_COMEDI_DAS08_ISA) && |
1556 | (thisboard->bustype == isa || thisboard->bustype == pc104)) { |
1557 | diff --git a/drivers/staging/comedi/drivers/ni_daq_700.c b/drivers/staging/comedi/drivers/ni_daq_700.c |
1558 | index 83016b4..bcf6a65 100644 |
1559 | --- a/drivers/staging/comedi/drivers/ni_daq_700.c |
1560 | +++ b/drivers/staging/comedi/drivers/ni_daq_700.c |
1561 | @@ -71,7 +71,7 @@ static int subdev_700_insn(struct comedi_device *dev, |
1562 | } |
1563 | |
1564 | data[1] = s->state & 0xff; |
1565 | - data[1] |= inb(dev->iobase + DIO_R); |
1566 | + data[1] |= inb(dev->iobase + DIO_R) << 8; |
1567 | |
1568 | return insn->n; |
1569 | } |
1570 | diff --git a/drivers/staging/comedi/drivers/ni_labpc.c b/drivers/staging/comedi/drivers/ni_labpc.c |
1571 | index ab8b787..d3a1d65 100644 |
1572 | --- a/drivers/staging/comedi/drivers/ni_labpc.c |
1573 | +++ b/drivers/staging/comedi/drivers/ni_labpc.c |
1574 | @@ -809,6 +809,8 @@ static int labpc_find_device(struct comedi_device *dev, int bus, int slot) |
1575 | |
1576 | void labpc_common_detach(struct comedi_device *dev) |
1577 | { |
1578 | + if (!thisboard) |
1579 | + return; |
1580 | if (dev->subdevices) |
1581 | subdev_8255_cleanup(dev, dev->subdevices + 2); |
1582 | #ifdef CONFIG_ISA_DMA_API |
1583 | diff --git a/drivers/staging/zram/zram_drv.c b/drivers/staging/zram/zram_drv.c |
1584 | index 653b074..6edefde 100644 |
1585 | --- a/drivers/staging/zram/zram_drv.c |
1586 | +++ b/drivers/staging/zram/zram_drv.c |
1587 | @@ -223,8 +223,13 @@ static int zram_bvec_read(struct zram *zram, struct bio_vec *bvec, |
1588 | cmem = zs_map_object(zram->mem_pool, zram->table[index].handle, |
1589 | ZS_MM_RO); |
1590 | |
1591 | - ret = lzo1x_decompress_safe(cmem, zram->table[index].size, |
1592 | + if (zram->table[index].size == PAGE_SIZE) { |
1593 | + memcpy(uncmem, cmem, PAGE_SIZE); |
1594 | + ret = LZO_E_OK; |
1595 | + } else { |
1596 | + ret = lzo1x_decompress_safe(cmem, zram->table[index].size, |
1597 | uncmem, &clen); |
1598 | + } |
1599 | |
1600 | if (is_partial_io(bvec)) { |
1601 | memcpy(user_mem + bvec->bv_offset, uncmem + offset, |
1602 | @@ -342,8 +347,11 @@ static int zram_bvec_write(struct zram *zram, struct bio_vec *bvec, u32 index, |
1603 | goto out; |
1604 | } |
1605 | |
1606 | - if (unlikely(clen > max_zpage_size)) |
1607 | + if (unlikely(clen > max_zpage_size)) { |
1608 | zram_stat_inc(&zram->stats.bad_compress); |
1609 | + src = uncmem; |
1610 | + clen = PAGE_SIZE; |
1611 | + } |
1612 | |
1613 | handle = zs_malloc(zram->mem_pool, clen); |
1614 | if (!handle) { |
1615 | diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c |
1616 | index bbff143..fe7faf0 100644 |
1617 | --- a/drivers/usb/core/hub.c |
1618 | +++ b/drivers/usb/core/hub.c |
1619 | @@ -730,13 +730,16 @@ static void hub_tt_work(struct work_struct *work) |
1620 | int limit = 100; |
1621 | |
1622 | spin_lock_irqsave (&hub->tt.lock, flags); |
1623 | - while (--limit && !list_empty (&hub->tt.clear_list)) { |
1624 | + while (!list_empty(&hub->tt.clear_list)) { |
1625 | struct list_head *next; |
1626 | struct usb_tt_clear *clear; |
1627 | struct usb_device *hdev = hub->hdev; |
1628 | const struct hc_driver *drv; |
1629 | int status; |
1630 | |
1631 | + if (!hub->quiescing && --limit < 0) |
1632 | + break; |
1633 | + |
1634 | next = hub->tt.clear_list.next; |
1635 | clear = list_entry (next, struct usb_tt_clear, clear_list); |
1636 | list_del (&clear->clear_list); |
1637 | @@ -1201,7 +1204,7 @@ static void hub_quiesce(struct usb_hub *hub, enum hub_quiescing_type type) |
1638 | if (hub->has_indicators) |
1639 | cancel_delayed_work_sync(&hub->leds); |
1640 | if (hub->tt.hub) |
1641 | - cancel_work_sync(&hub->tt.clear_work); |
1642 | + flush_work_sync(&hub->tt.clear_work); |
1643 | } |
1644 | |
1645 | /* caller has locked the hub device */ |
1646 | diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c |
1647 | index 966d148..39f9e4a 100644 |
1648 | --- a/drivers/usb/host/pci-quirks.c |
1649 | +++ b/drivers/usb/host/pci-quirks.c |
1650 | @@ -545,7 +545,14 @@ static const struct dmi_system_id __devinitconst ehci_dmi_nohandoff_table[] = { |
1651 | /* Pegatron Lucid (Ordissimo AIRIS) */ |
1652 | .matches = { |
1653 | DMI_MATCH(DMI_BOARD_NAME, "M11JB"), |
1654 | - DMI_MATCH(DMI_BIOS_VERSION, "Lucid-GE-133"), |
1655 | + DMI_MATCH(DMI_BIOS_VERSION, "Lucid-"), |
1656 | + }, |
1657 | + }, |
1658 | + { |
1659 | + /* Pegatron Lucid (Ordissimo) */ |
1660 | + .matches = { |
1661 | + DMI_MATCH(DMI_BOARD_NAME, "Ordissimo"), |
1662 | + DMI_MATCH(DMI_BIOS_VERSION, "Lucid-"), |
1663 | }, |
1664 | }, |
1665 | { } |
1666 | diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c |
1667 | index a6e18b9..4f1e265 100644 |
1668 | --- a/drivers/usb/host/xhci-ring.c |
1669 | +++ b/drivers/usb/host/xhci-ring.c |
1670 | @@ -1228,6 +1228,17 @@ static void xhci_cmd_to_noop(struct xhci_hcd *xhci, struct xhci_cd *cur_cd) |
1671 | cur_seg = find_trb_seg(xhci->cmd_ring->first_seg, |
1672 | xhci->cmd_ring->dequeue, &cycle_state); |
1673 | |
1674 | + if (!cur_seg) { |
1675 | + xhci_warn(xhci, "Command ring mismatch, dequeue = %p %llx (dma)\n", |
1676 | + xhci->cmd_ring->dequeue, |
1677 | + (unsigned long long) |
1678 | + xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg, |
1679 | + xhci->cmd_ring->dequeue)); |
1680 | + xhci_debug_ring(xhci, xhci->cmd_ring); |
1681 | + xhci_dbg_ring_ptrs(xhci, xhci->cmd_ring); |
1682 | + return; |
1683 | + } |
1684 | + |
1685 | /* find the command trb matched by cd from command ring */ |
1686 | for (cmd_trb = xhci->cmd_ring->dequeue; |
1687 | cmd_trb != xhci->cmd_ring->enqueue; |
1688 | diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c |
1689 | index 0644f65..a6e910b 100644 |
1690 | --- a/drivers/usb/host/xhci.c |
1691 | +++ b/drivers/usb/host/xhci.c |
1692 | @@ -4020,7 +4020,7 @@ int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev) |
1693 | static unsigned long long xhci_service_interval_to_ns( |
1694 | struct usb_endpoint_descriptor *desc) |
1695 | { |
1696 | - return (1 << (desc->bInterval - 1)) * 125 * 1000; |
1697 | + return (1ULL << (desc->bInterval - 1)) * 125 * 1000; |
1698 | } |
1699 | |
1700 | static u16 xhci_get_timeout_no_hub_lpm(struct usb_device *udev, |
1701 | @@ -4141,7 +4141,7 @@ static u16 xhci_calculate_intel_u2_timeout(struct usb_device *udev, |
1702 | (xhci_service_interval_to_ns(desc) > timeout_ns)) |
1703 | timeout_ns = xhci_service_interval_to_ns(desc); |
1704 | |
1705 | - u2_del_ns = udev->bos->ss_cap->bU2DevExitLat * 1000; |
1706 | + u2_del_ns = le16_to_cpu(udev->bos->ss_cap->bU2DevExitLat) * 1000ULL; |
1707 | if (u2_del_ns > timeout_ns) |
1708 | timeout_ns = u2_del_ns; |
1709 | |
1710 | diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c |
1711 | index cabd1b1..8391d30 100644 |
1712 | --- a/drivers/usb/serial/ch341.c |
1713 | +++ b/drivers/usb/serial/ch341.c |
1714 | @@ -241,13 +241,11 @@ out: kfree(buffer); |
1715 | return r; |
1716 | } |
1717 | |
1718 | -/* allocate private data */ |
1719 | -static int ch341_attach(struct usb_serial *serial) |
1720 | +static int ch341_port_probe(struct usb_serial_port *port) |
1721 | { |
1722 | struct ch341_private *priv; |
1723 | int r; |
1724 | |
1725 | - /* private data */ |
1726 | priv = kzalloc(sizeof(struct ch341_private), GFP_KERNEL); |
1727 | if (!priv) |
1728 | return -ENOMEM; |
1729 | @@ -257,17 +255,27 @@ static int ch341_attach(struct usb_serial *serial) |
1730 | priv->baud_rate = DEFAULT_BAUD_RATE; |
1731 | priv->line_control = CH341_BIT_RTS | CH341_BIT_DTR; |
1732 | |
1733 | - r = ch341_configure(serial->dev, priv); |
1734 | + r = ch341_configure(port->serial->dev, priv); |
1735 | if (r < 0) |
1736 | goto error; |
1737 | |
1738 | - usb_set_serial_port_data(serial->port[0], priv); |
1739 | + usb_set_serial_port_data(port, priv); |
1740 | return 0; |
1741 | |
1742 | error: kfree(priv); |
1743 | return r; |
1744 | } |
1745 | |
1746 | +static int ch341_port_remove(struct usb_serial_port *port) |
1747 | +{ |
1748 | + struct ch341_private *priv; |
1749 | + |
1750 | + priv = usb_get_serial_port_data(port); |
1751 | + kfree(priv); |
1752 | + |
1753 | + return 0; |
1754 | +} |
1755 | + |
1756 | static int ch341_carrier_raised(struct usb_serial_port *port) |
1757 | { |
1758 | struct ch341_private *priv = usb_get_serial_port_data(port); |
1759 | @@ -303,7 +311,7 @@ static void ch341_close(struct usb_serial_port *port) |
1760 | static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port) |
1761 | { |
1762 | struct usb_serial *serial = port->serial; |
1763 | - struct ch341_private *priv = usb_get_serial_port_data(serial->port[0]); |
1764 | + struct ch341_private *priv = usb_get_serial_port_data(port); |
1765 | int r; |
1766 | |
1767 | priv->baud_rate = DEFAULT_BAUD_RATE; |
1768 | @@ -606,7 +614,8 @@ static struct usb_serial_driver ch341_device = { |
1769 | .tiocmget = ch341_tiocmget, |
1770 | .tiocmset = ch341_tiocmset, |
1771 | .read_int_callback = ch341_read_int_callback, |
1772 | - .attach = ch341_attach, |
1773 | + .port_probe = ch341_port_probe, |
1774 | + .port_remove = ch341_port_remove, |
1775 | .reset_resume = ch341_reset_resume, |
1776 | }; |
1777 | |
1778 | diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c |
1779 | index b5cd838..06e8bf4 100644 |
1780 | --- a/drivers/usb/serial/digi_acceleport.c |
1781 | +++ b/drivers/usb/serial/digi_acceleport.c |
1782 | @@ -244,6 +244,8 @@ static int digi_startup_device(struct usb_serial *serial); |
1783 | static int digi_startup(struct usb_serial *serial); |
1784 | static void digi_disconnect(struct usb_serial *serial); |
1785 | static void digi_release(struct usb_serial *serial); |
1786 | +static int digi_port_probe(struct usb_serial_port *port); |
1787 | +static int digi_port_remove(struct usb_serial_port *port); |
1788 | static void digi_read_bulk_callback(struct urb *urb); |
1789 | static int digi_read_inb_callback(struct urb *urb); |
1790 | static int digi_read_oob_callback(struct urb *urb); |
1791 | @@ -298,6 +300,8 @@ static struct usb_serial_driver digi_acceleport_2_device = { |
1792 | .attach = digi_startup, |
1793 | .disconnect = digi_disconnect, |
1794 | .release = digi_release, |
1795 | + .port_probe = digi_port_probe, |
1796 | + .port_remove = digi_port_remove, |
1797 | }; |
1798 | |
1799 | static struct usb_serial_driver digi_acceleport_4_device = { |
1800 | @@ -324,6 +328,8 @@ static struct usb_serial_driver digi_acceleport_4_device = { |
1801 | .attach = digi_startup, |
1802 | .disconnect = digi_disconnect, |
1803 | .release = digi_release, |
1804 | + .port_probe = digi_port_probe, |
1805 | + .port_remove = digi_port_remove, |
1806 | }; |
1807 | |
1808 | static struct usb_serial_driver * const serial_drivers[] = { |
1809 | @@ -1237,59 +1243,50 @@ static int digi_startup_device(struct usb_serial *serial) |
1810 | return ret; |
1811 | } |
1812 | |
1813 | - |
1814 | -static int digi_startup(struct usb_serial *serial) |
1815 | +static int digi_port_init(struct usb_serial_port *port, unsigned port_num) |
1816 | { |
1817 | - |
1818 | - int i; |
1819 | struct digi_port *priv; |
1820 | - struct digi_serial *serial_priv; |
1821 | |
1822 | - /* allocate the private data structures for all ports */ |
1823 | - /* number of regular ports + 1 for the out-of-band port */ |
1824 | - for (i = 0; i < serial->type->num_ports + 1; i++) { |
1825 | - /* allocate port private structure */ |
1826 | - priv = kmalloc(sizeof(struct digi_port), GFP_KERNEL); |
1827 | - if (priv == NULL) { |
1828 | - while (--i >= 0) |
1829 | - kfree(usb_get_serial_port_data(serial->port[i])); |
1830 | - return 1; /* error */ |
1831 | - } |
1832 | + priv = kzalloc(sizeof(*priv), GFP_KERNEL); |
1833 | + if (!priv) |
1834 | + return -ENOMEM; |
1835 | |
1836 | - /* initialize port private structure */ |
1837 | - spin_lock_init(&priv->dp_port_lock); |
1838 | - priv->dp_port_num = i; |
1839 | - priv->dp_out_buf_len = 0; |
1840 | - priv->dp_write_urb_in_use = 0; |
1841 | - priv->dp_modem_signals = 0; |
1842 | - init_waitqueue_head(&priv->dp_modem_change_wait); |
1843 | - priv->dp_transmit_idle = 0; |
1844 | - init_waitqueue_head(&priv->dp_transmit_idle_wait); |
1845 | - priv->dp_throttled = 0; |
1846 | - priv->dp_throttle_restart = 0; |
1847 | - init_waitqueue_head(&priv->dp_flush_wait); |
1848 | - init_waitqueue_head(&priv->dp_close_wait); |
1849 | - INIT_WORK(&priv->dp_wakeup_work, digi_wakeup_write_lock); |
1850 | - priv->dp_port = serial->port[i]; |
1851 | - /* initialize write wait queue for this port */ |
1852 | - init_waitqueue_head(&serial->port[i]->write_wait); |
1853 | - |
1854 | - usb_set_serial_port_data(serial->port[i], priv); |
1855 | - } |
1856 | + spin_lock_init(&priv->dp_port_lock); |
1857 | + priv->dp_port_num = port_num; |
1858 | + init_waitqueue_head(&priv->dp_modem_change_wait); |
1859 | + init_waitqueue_head(&priv->dp_transmit_idle_wait); |
1860 | + init_waitqueue_head(&priv->dp_flush_wait); |
1861 | + init_waitqueue_head(&priv->dp_close_wait); |
1862 | + INIT_WORK(&priv->dp_wakeup_work, digi_wakeup_write_lock); |
1863 | + priv->dp_port = port; |
1864 | |
1865 | - /* allocate serial private structure */ |
1866 | - serial_priv = kmalloc(sizeof(struct digi_serial), GFP_KERNEL); |
1867 | - if (serial_priv == NULL) { |
1868 | - for (i = 0; i < serial->type->num_ports + 1; i++) |
1869 | - kfree(usb_get_serial_port_data(serial->port[i])); |
1870 | - return 1; /* error */ |
1871 | - } |
1872 | + init_waitqueue_head(&port->write_wait); |
1873 | + |
1874 | + usb_set_serial_port_data(port, priv); |
1875 | + |
1876 | + return 0; |
1877 | +} |
1878 | + |
1879 | +static int digi_startup(struct usb_serial *serial) |
1880 | +{ |
1881 | + struct digi_serial *serial_priv; |
1882 | + int ret; |
1883 | + |
1884 | + serial_priv = kzalloc(sizeof(*serial_priv), GFP_KERNEL); |
1885 | + if (!serial_priv) |
1886 | + return -ENOMEM; |
1887 | |
1888 | - /* initialize serial private structure */ |
1889 | spin_lock_init(&serial_priv->ds_serial_lock); |
1890 | serial_priv->ds_oob_port_num = serial->type->num_ports; |
1891 | serial_priv->ds_oob_port = serial->port[serial_priv->ds_oob_port_num]; |
1892 | - serial_priv->ds_device_started = 0; |
1893 | + |
1894 | + ret = digi_port_init(serial_priv->ds_oob_port, |
1895 | + serial_priv->ds_oob_port_num); |
1896 | + if (ret) { |
1897 | + kfree(serial_priv); |
1898 | + return ret; |
1899 | + } |
1900 | + |
1901 | usb_set_serial_data(serial, serial_priv); |
1902 | |
1903 | return 0; |
1904 | @@ -1310,15 +1307,35 @@ static void digi_disconnect(struct usb_serial *serial) |
1905 | |
1906 | static void digi_release(struct usb_serial *serial) |
1907 | { |
1908 | - int i; |
1909 | + struct digi_serial *serial_priv; |
1910 | + struct digi_port *priv; |
1911 | + |
1912 | + serial_priv = usb_get_serial_data(serial); |
1913 | + |
1914 | + priv = usb_get_serial_port_data(serial_priv->ds_oob_port); |
1915 | + kfree(priv); |
1916 | |
1917 | - /* free the private data structures for all ports */ |
1918 | - /* number of regular ports + 1 for the out-of-band port */ |
1919 | - for (i = 0; i < serial->type->num_ports + 1; i++) |
1920 | - kfree(usb_get_serial_port_data(serial->port[i])); |
1921 | - kfree(usb_get_serial_data(serial)); |
1922 | + kfree(serial_priv); |
1923 | } |
1924 | |
1925 | +static int digi_port_probe(struct usb_serial_port *port) |
1926 | +{ |
1927 | + unsigned port_num; |
1928 | + |
1929 | + port_num = port->number - port->serial->minor; |
1930 | + |
1931 | + return digi_port_init(port, port_num); |
1932 | +} |
1933 | + |
1934 | +static int digi_port_remove(struct usb_serial_port *port) |
1935 | +{ |
1936 | + struct digi_port *priv; |
1937 | + |
1938 | + priv = usb_get_serial_port_data(port); |
1939 | + kfree(priv); |
1940 | + |
1941 | + return 0; |
1942 | +} |
1943 | |
1944 | static void digi_read_bulk_callback(struct urb *urb) |
1945 | { |
1946 | diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c |
1947 | index 2cb30c5..8df011f 100644 |
1948 | --- a/drivers/usb/serial/ipw.c |
1949 | +++ b/drivers/usb/serial/ipw.c |
1950 | @@ -209,8 +209,7 @@ static int ipw_open(struct tty_struct *tty, struct usb_serial_port *port) |
1951 | return 0; |
1952 | } |
1953 | |
1954 | -/* fake probe - only to allocate data structures */ |
1955 | -static int ipw_probe(struct usb_serial *serial, const struct usb_device_id *id) |
1956 | +static int ipw_attach(struct usb_serial *serial) |
1957 | { |
1958 | struct usb_wwan_intf_private *data; |
1959 | |
1960 | @@ -310,9 +309,9 @@ static struct usb_serial_driver ipw_device = { |
1961 | .num_ports = 1, |
1962 | .open = ipw_open, |
1963 | .close = ipw_close, |
1964 | - .probe = ipw_probe, |
1965 | - .attach = usb_wwan_startup, |
1966 | + .attach = ipw_attach, |
1967 | .release = ipw_release, |
1968 | + .port_probe = usb_wwan_port_probe, |
1969 | .port_remove = usb_wwan_port_remove, |
1970 | .dtr_rts = ipw_dtr_rts, |
1971 | .write = usb_wwan_write, |
1972 | diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c |
1973 | index af0b70e..f6788d7 100644 |
1974 | --- a/drivers/usb/serial/keyspan.c |
1975 | +++ b/drivers/usb/serial/keyspan.c |
1976 | @@ -1392,13 +1392,9 @@ static struct callbacks { |
1977 | data in device_details */ |
1978 | static void keyspan_setup_urbs(struct usb_serial *serial) |
1979 | { |
1980 | - int i, j; |
1981 | struct keyspan_serial_private *s_priv; |
1982 | const struct keyspan_device_details *d_details; |
1983 | - struct usb_serial_port *port; |
1984 | - struct keyspan_port_private *p_priv; |
1985 | struct callbacks *cback; |
1986 | - int endp; |
1987 | |
1988 | s_priv = usb_get_serial_data(serial); |
1989 | d_details = s_priv->device_details; |
1990 | @@ -1422,45 +1418,6 @@ static void keyspan_setup_urbs(struct usb_serial *serial) |
1991 | (serial, d_details->glocont_endpoint, USB_DIR_OUT, |
1992 | serial, s_priv->glocont_buf, GLOCONT_BUFLEN, |
1993 | cback->glocont_callback); |
1994 | - |
1995 | - /* Setup endpoints for each port specific thing */ |
1996 | - for (i = 0; i < d_details->num_ports; i++) { |
1997 | - port = serial->port[i]; |
1998 | - p_priv = usb_get_serial_port_data(port); |
1999 | - |
2000 | - /* Do indat endpoints first, once for each flip */ |
2001 | - endp = d_details->indat_endpoints[i]; |
2002 | - for (j = 0; j <= d_details->indat_endp_flip; ++j, ++endp) { |
2003 | - p_priv->in_urbs[j] = keyspan_setup_urb |
2004 | - (serial, endp, USB_DIR_IN, port, |
2005 | - p_priv->in_buffer[j], 64, |
2006 | - cback->indat_callback); |
2007 | - } |
2008 | - for (; j < 2; ++j) |
2009 | - p_priv->in_urbs[j] = NULL; |
2010 | - |
2011 | - /* outdat endpoints also have flip */ |
2012 | - endp = d_details->outdat_endpoints[i]; |
2013 | - for (j = 0; j <= d_details->outdat_endp_flip; ++j, ++endp) { |
2014 | - p_priv->out_urbs[j] = keyspan_setup_urb |
2015 | - (serial, endp, USB_DIR_OUT, port, |
2016 | - p_priv->out_buffer[j], 64, |
2017 | - cback->outdat_callback); |
2018 | - } |
2019 | - for (; j < 2; ++j) |
2020 | - p_priv->out_urbs[j] = NULL; |
2021 | - |
2022 | - /* inack endpoint */ |
2023 | - p_priv->inack_urb = keyspan_setup_urb |
2024 | - (serial, d_details->inack_endpoints[i], USB_DIR_IN, |
2025 | - port, p_priv->inack_buffer, 1, cback->inack_callback); |
2026 | - |
2027 | - /* outcont endpoint */ |
2028 | - p_priv->outcont_urb = keyspan_setup_urb |
2029 | - (serial, d_details->outcont_endpoints[i], USB_DIR_OUT, |
2030 | - port, p_priv->outcont_buffer, 64, |
2031 | - cback->outcont_callback); |
2032 | - } |
2033 | } |
2034 | |
2035 | /* usa19 function doesn't require prescaler */ |
2036 | @@ -2422,9 +2379,7 @@ static void keyspan_send_setup(struct usb_serial_port *port, int reset_port) |
2037 | static int keyspan_startup(struct usb_serial *serial) |
2038 | { |
2039 | int i, err; |
2040 | - struct usb_serial_port *port; |
2041 | struct keyspan_serial_private *s_priv; |
2042 | - struct keyspan_port_private *p_priv; |
2043 | const struct keyspan_device_details *d_details; |
2044 | |
2045 | for (i = 0; (d_details = keyspan_devices[i]) != NULL; ++i) |
2046 | @@ -2448,19 +2403,6 @@ static int keyspan_startup(struct usb_serial *serial) |
2047 | s_priv->device_details = d_details; |
2048 | usb_set_serial_data(serial, s_priv); |
2049 | |
2050 | - /* Now setup per port private data */ |
2051 | - for (i = 0; i < serial->num_ports; i++) { |
2052 | - port = serial->port[i]; |
2053 | - p_priv = kzalloc(sizeof(struct keyspan_port_private), |
2054 | - GFP_KERNEL); |
2055 | - if (!p_priv) { |
2056 | - dbg("%s - kmalloc for keyspan_port_private (%d) failed!.", __func__, i); |
2057 | - return 1; |
2058 | - } |
2059 | - p_priv->device_details = d_details; |
2060 | - usb_set_serial_port_data(port, p_priv); |
2061 | - } |
2062 | - |
2063 | keyspan_setup_urbs(serial); |
2064 | |
2065 | if (s_priv->instat_urb != NULL) { |
2066 | @@ -2481,61 +2423,112 @@ static int keyspan_startup(struct usb_serial *serial) |
2067 | |
2068 | static void keyspan_disconnect(struct usb_serial *serial) |
2069 | { |
2070 | - int i, j; |
2071 | - struct usb_serial_port *port; |
2072 | - struct keyspan_serial_private *s_priv; |
2073 | - struct keyspan_port_private *p_priv; |
2074 | + struct keyspan_serial_private *s_priv; |
2075 | |
2076 | s_priv = usb_get_serial_data(serial); |
2077 | |
2078 | - /* Stop reading/writing urbs */ |
2079 | stop_urb(s_priv->instat_urb); |
2080 | stop_urb(s_priv->glocont_urb); |
2081 | stop_urb(s_priv->indat_urb); |
2082 | - for (i = 0; i < serial->num_ports; ++i) { |
2083 | - port = serial->port[i]; |
2084 | - p_priv = usb_get_serial_port_data(port); |
2085 | - stop_urb(p_priv->inack_urb); |
2086 | - stop_urb(p_priv->outcont_urb); |
2087 | - for (j = 0; j < 2; j++) { |
2088 | - stop_urb(p_priv->in_urbs[j]); |
2089 | - stop_urb(p_priv->out_urbs[j]); |
2090 | - } |
2091 | - } |
2092 | +} |
2093 | + |
2094 | +static void keyspan_release(struct usb_serial *serial) |
2095 | +{ |
2096 | + struct keyspan_serial_private *s_priv; |
2097 | + |
2098 | + s_priv = usb_get_serial_data(serial); |
2099 | |
2100 | - /* Now free them */ |
2101 | usb_free_urb(s_priv->instat_urb); |
2102 | usb_free_urb(s_priv->indat_urb); |
2103 | usb_free_urb(s_priv->glocont_urb); |
2104 | - for (i = 0; i < serial->num_ports; ++i) { |
2105 | - port = serial->port[i]; |
2106 | - p_priv = usb_get_serial_port_data(port); |
2107 | - usb_free_urb(p_priv->inack_urb); |
2108 | - usb_free_urb(p_priv->outcont_urb); |
2109 | - for (j = 0; j < 2; j++) { |
2110 | - usb_free_urb(p_priv->in_urbs[j]); |
2111 | - usb_free_urb(p_priv->out_urbs[j]); |
2112 | - } |
2113 | - } |
2114 | + |
2115 | + kfree(s_priv); |
2116 | } |
2117 | |
2118 | -static void keyspan_release(struct usb_serial *serial) |
2119 | +static int keyspan_port_probe(struct usb_serial_port *port) |
2120 | { |
2121 | - int i; |
2122 | - struct usb_serial_port *port; |
2123 | - struct keyspan_serial_private *s_priv; |
2124 | + struct usb_serial *serial = port->serial; |
2125 | + struct keyspan_port_private *s_priv; |
2126 | + struct keyspan_port_private *p_priv; |
2127 | + const struct keyspan_device_details *d_details; |
2128 | + struct callbacks *cback; |
2129 | + int endp; |
2130 | + int port_num; |
2131 | + int i; |
2132 | |
2133 | s_priv = usb_get_serial_data(serial); |
2134 | + d_details = s_priv->device_details; |
2135 | |
2136 | - /* dbg("Freeing serial->private."); */ |
2137 | - kfree(s_priv); |
2138 | + p_priv = kzalloc(sizeof(*p_priv), GFP_KERNEL); |
2139 | + if (!p_priv) |
2140 | + return -ENOMEM; |
2141 | |
2142 | - /* dbg("Freeing port->private."); */ |
2143 | - /* Now free per port private data */ |
2144 | - for (i = 0; i < serial->num_ports; i++) { |
2145 | - port = serial->port[i]; |
2146 | - kfree(usb_get_serial_port_data(port)); |
2147 | + s_priv = usb_get_serial_data(port->serial); |
2148 | + p_priv->device_details = d_details; |
2149 | + |
2150 | + /* Setup values for the various callback routines */ |
2151 | + cback = &keyspan_callbacks[d_details->msg_format]; |
2152 | + |
2153 | + port_num = port->number - port->serial->minor; |
2154 | + |
2155 | + /* Do indat endpoints first, once for each flip */ |
2156 | + endp = d_details->indat_endpoints[port_num]; |
2157 | + for (i = 0; i <= d_details->indat_endp_flip; ++i, ++endp) { |
2158 | + p_priv->in_urbs[i] = keyspan_setup_urb(serial, endp, |
2159 | + USB_DIR_IN, port, |
2160 | + p_priv->in_buffer[i], 64, |
2161 | + cback->indat_callback); |
2162 | + } |
2163 | + /* outdat endpoints also have flip */ |
2164 | + endp = d_details->outdat_endpoints[port_num]; |
2165 | + for (i = 0; i <= d_details->outdat_endp_flip; ++i, ++endp) { |
2166 | + p_priv->out_urbs[i] = keyspan_setup_urb(serial, endp, |
2167 | + USB_DIR_OUT, port, |
2168 | + p_priv->out_buffer[i], 64, |
2169 | + cback->outdat_callback); |
2170 | + } |
2171 | + /* inack endpoint */ |
2172 | + p_priv->inack_urb = keyspan_setup_urb(serial, |
2173 | + d_details->inack_endpoints[port_num], |
2174 | + USB_DIR_IN, port, |
2175 | + p_priv->inack_buffer, 1, |
2176 | + cback->inack_callback); |
2177 | + /* outcont endpoint */ |
2178 | + p_priv->outcont_urb = keyspan_setup_urb(serial, |
2179 | + d_details->outcont_endpoints[port_num], |
2180 | + USB_DIR_OUT, port, |
2181 | + p_priv->outcont_buffer, 64, |
2182 | + cback->outcont_callback); |
2183 | + |
2184 | + usb_set_serial_port_data(port, p_priv); |
2185 | + |
2186 | + return 0; |
2187 | +} |
2188 | + |
2189 | +static int keyspan_port_remove(struct usb_serial_port *port) |
2190 | +{ |
2191 | + struct keyspan_port_private *p_priv; |
2192 | + int i; |
2193 | + |
2194 | + p_priv = usb_get_serial_port_data(port); |
2195 | + |
2196 | + stop_urb(p_priv->inack_urb); |
2197 | + stop_urb(p_priv->outcont_urb); |
2198 | + for (i = 0; i < 2; i++) { |
2199 | + stop_urb(p_priv->in_urbs[i]); |
2200 | + stop_urb(p_priv->out_urbs[i]); |
2201 | + } |
2202 | + |
2203 | + usb_free_urb(p_priv->inack_urb); |
2204 | + usb_free_urb(p_priv->outcont_urb); |
2205 | + for (i = 0; i < 2; i++) { |
2206 | + usb_free_urb(p_priv->in_urbs[i]); |
2207 | + usb_free_urb(p_priv->out_urbs[i]); |
2208 | } |
2209 | + |
2210 | + kfree(p_priv); |
2211 | + |
2212 | + return 0; |
2213 | } |
2214 | |
2215 | MODULE_AUTHOR(DRIVER_AUTHOR); |
2216 | diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h |
2217 | index fe1c5d9..90a7b36 100644 |
2218 | --- a/drivers/usb/serial/keyspan.h |
2219 | +++ b/drivers/usb/serial/keyspan.h |
2220 | @@ -42,6 +42,8 @@ static void keyspan_dtr_rts (struct usb_serial_port *port, int on); |
2221 | static int keyspan_startup (struct usb_serial *serial); |
2222 | static void keyspan_disconnect (struct usb_serial *serial); |
2223 | static void keyspan_release (struct usb_serial *serial); |
2224 | +static int keyspan_port_probe(struct usb_serial_port *port); |
2225 | +static int keyspan_port_remove(struct usb_serial_port *port); |
2226 | static int keyspan_write_room (struct tty_struct *tty); |
2227 | |
2228 | static int keyspan_write (struct tty_struct *tty, |
2229 | @@ -562,6 +564,8 @@ static struct usb_serial_driver keyspan_1port_device = { |
2230 | .attach = keyspan_startup, |
2231 | .disconnect = keyspan_disconnect, |
2232 | .release = keyspan_release, |
2233 | + .port_probe = keyspan_port_probe, |
2234 | + .port_remove = keyspan_port_remove, |
2235 | }; |
2236 | |
2237 | static struct usb_serial_driver keyspan_2port_device = { |
2238 | @@ -584,6 +588,8 @@ static struct usb_serial_driver keyspan_2port_device = { |
2239 | .attach = keyspan_startup, |
2240 | .disconnect = keyspan_disconnect, |
2241 | .release = keyspan_release, |
2242 | + .port_probe = keyspan_port_probe, |
2243 | + .port_remove = keyspan_port_remove, |
2244 | }; |
2245 | |
2246 | static struct usb_serial_driver keyspan_4port_device = { |
2247 | @@ -606,6 +612,8 @@ static struct usb_serial_driver keyspan_4port_device = { |
2248 | .attach = keyspan_startup, |
2249 | .disconnect = keyspan_disconnect, |
2250 | .release = keyspan_release, |
2251 | + .port_probe = keyspan_port_probe, |
2252 | + .port_remove = keyspan_port_remove, |
2253 | }; |
2254 | |
2255 | static struct usb_serial_driver * const serial_drivers[] = { |
2256 | diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c |
2257 | index a71fa0a..c088250 100644 |
2258 | --- a/drivers/usb/serial/mct_u232.c |
2259 | +++ b/drivers/usb/serial/mct_u232.c |
2260 | @@ -51,7 +51,8 @@ static bool debug; |
2261 | * Function prototypes |
2262 | */ |
2263 | static int mct_u232_startup(struct usb_serial *serial); |
2264 | -static void mct_u232_release(struct usb_serial *serial); |
2265 | +static int mct_u232_port_probe(struct usb_serial_port *port); |
2266 | +static int mct_u232_port_remove(struct usb_serial_port *remove); |
2267 | static int mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port); |
2268 | static void mct_u232_close(struct usb_serial_port *port); |
2269 | static void mct_u232_dtr_rts(struct usb_serial_port *port, int on); |
2270 | @@ -101,7 +102,8 @@ static struct usb_serial_driver mct_u232_device = { |
2271 | .tiocmget = mct_u232_tiocmget, |
2272 | .tiocmset = mct_u232_tiocmset, |
2273 | .attach = mct_u232_startup, |
2274 | - .release = mct_u232_release, |
2275 | + .port_probe = mct_u232_port_probe, |
2276 | + .port_remove = mct_u232_port_remove, |
2277 | .ioctl = mct_u232_ioctl, |
2278 | .get_icount = mct_u232_get_icount, |
2279 | }; |
2280 | @@ -392,18 +394,8 @@ static void mct_u232_msr_to_state(unsigned int *control_state, |
2281 | |
2282 | static int mct_u232_startup(struct usb_serial *serial) |
2283 | { |
2284 | - struct mct_u232_private *priv; |
2285 | struct usb_serial_port *port, *rport; |
2286 | |
2287 | - priv = kzalloc(sizeof(struct mct_u232_private), GFP_KERNEL); |
2288 | - if (!priv) |
2289 | - return -ENOMEM; |
2290 | - spin_lock_init(&priv->lock); |
2291 | - init_waitqueue_head(&priv->msr_wait); |
2292 | - usb_set_serial_port_data(serial->port[0], priv); |
2293 | - |
2294 | - init_waitqueue_head(&serial->port[0]->write_wait); |
2295 | - |
2296 | /* Puh, that's dirty */ |
2297 | port = serial->port[0]; |
2298 | rport = serial->port[1]; |
2299 | @@ -416,18 +408,31 @@ static int mct_u232_startup(struct usb_serial *serial) |
2300 | return 0; |
2301 | } /* mct_u232_startup */ |
2302 | |
2303 | +static int mct_u232_port_probe(struct usb_serial_port *port) |
2304 | +{ |
2305 | + struct mct_u232_private *priv; |
2306 | + |
2307 | + priv = kzalloc(sizeof(*priv), GFP_KERNEL); |
2308 | + if (!priv) |
2309 | + return -ENOMEM; |
2310 | + |
2311 | + spin_lock_init(&priv->lock); |
2312 | + init_waitqueue_head(&priv->msr_wait); |
2313 | + |
2314 | + usb_set_serial_port_data(port, priv); |
2315 | |
2316 | -static void mct_u232_release(struct usb_serial *serial) |
2317 | + return 0; |
2318 | +} |
2319 | + |
2320 | +static int mct_u232_port_remove(struct usb_serial_port *port) |
2321 | { |
2322 | struct mct_u232_private *priv; |
2323 | - int i; |
2324 | |
2325 | - for (i = 0; i < serial->num_ports; ++i) { |
2326 | - /* My special items, the standard routines free my urbs */ |
2327 | - priv = usb_get_serial_port_data(serial->port[i]); |
2328 | - kfree(priv); |
2329 | - } |
2330 | -} /* mct_u232_release */ |
2331 | + priv = usb_get_serial_port_data(port); |
2332 | + kfree(priv); |
2333 | + |
2334 | + return 0; |
2335 | +} |
2336 | |
2337 | static int mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port) |
2338 | { |
2339 | @@ -519,12 +524,14 @@ static void mct_u232_dtr_rts(struct usb_serial_port *port, int on) |
2340 | |
2341 | static void mct_u232_close(struct usb_serial_port *port) |
2342 | { |
2343 | - if (port->serial->dev) { |
2344 | - /* shutdown our urbs */ |
2345 | - usb_kill_urb(port->write_urb); |
2346 | - usb_kill_urb(port->read_urb); |
2347 | - usb_kill_urb(port->interrupt_in_urb); |
2348 | - } |
2349 | + /* |
2350 | + * Must kill the read urb as it is actually an interrupt urb, which |
2351 | + * generic close thus fails to kill. |
2352 | + */ |
2353 | + usb_kill_urb(port->read_urb); |
2354 | + usb_kill_urb(port->interrupt_in_urb); |
2355 | + |
2356 | + usb_serial_generic_close(port); |
2357 | } /* mct_u232_close */ |
2358 | |
2359 | |
2360 | diff --git a/drivers/usb/serial/metro-usb.c b/drivers/usb/serial/metro-usb.c |
2361 | index d47eb06..d284fb8 100644 |
2362 | --- a/drivers/usb/serial/metro-usb.c |
2363 | +++ b/drivers/usb/serial/metro-usb.c |
2364 | @@ -188,16 +188,13 @@ static void metrousb_cleanup(struct usb_serial_port *port) |
2365 | { |
2366 | dev_dbg(&port->dev, "%s\n", __func__); |
2367 | |
2368 | - if (port->serial->dev) { |
2369 | - /* Shutdown any interrupt in urbs. */ |
2370 | - if (port->interrupt_in_urb) { |
2371 | - usb_unlink_urb(port->interrupt_in_urb); |
2372 | - usb_kill_urb(port->interrupt_in_urb); |
2373 | - } |
2374 | - |
2375 | - /* Send deactivate cmd to device */ |
2376 | + usb_unlink_urb(port->interrupt_in_urb); |
2377 | + usb_kill_urb(port->interrupt_in_urb); |
2378 | + |
2379 | + mutex_lock(&port->serial->disc_mutex); |
2380 | + if (!port->serial->disconnected) |
2381 | metrousb_send_unidirectional_cmd(UNI_CMD_CLOSE, port); |
2382 | - } |
2383 | + mutex_unlock(&port->serial->disc_mutex); |
2384 | } |
2385 | |
2386 | static int metrousb_open(struct tty_struct *tty, struct usb_serial_port *port) |
2387 | @@ -280,51 +277,27 @@ static int metrousb_set_modem_ctrl(struct usb_serial *serial, unsigned int contr |
2388 | return retval; |
2389 | } |
2390 | |
2391 | -static void metrousb_shutdown(struct usb_serial *serial) |
2392 | +static int metrousb_port_probe(struct usb_serial_port *port) |
2393 | { |
2394 | - int i = 0; |
2395 | + struct metrousb_private *metro_priv; |
2396 | |
2397 | - dev_dbg(&serial->dev->dev, "%s\n", __func__); |
2398 | + metro_priv = kzalloc(sizeof(*metro_priv), GFP_KERNEL); |
2399 | + if (!metro_priv) |
2400 | + return -ENOMEM; |
2401 | |
2402 | - /* Stop reading and writing on all ports. */ |
2403 | - for (i = 0; i < serial->num_ports; ++i) { |
2404 | - /* Close any open urbs. */ |
2405 | - metrousb_cleanup(serial->port[i]); |
2406 | + spin_lock_init(&metro_priv->lock); |
2407 | |
2408 | - /* Free memory. */ |
2409 | - kfree(usb_get_serial_port_data(serial->port[i])); |
2410 | - usb_set_serial_port_data(serial->port[i], NULL); |
2411 | + usb_set_serial_port_data(port, metro_priv); |
2412 | |
2413 | - dev_dbg(&serial->dev->dev, "%s - freed port number=%d\n", |
2414 | - __func__, serial->port[i]->number); |
2415 | - } |
2416 | + return 0; |
2417 | } |
2418 | |
2419 | -static int metrousb_startup(struct usb_serial *serial) |
2420 | +static int metrousb_port_remove(struct usb_serial_port *port) |
2421 | { |
2422 | struct metrousb_private *metro_priv; |
2423 | - struct usb_serial_port *port; |
2424 | - int i = 0; |
2425 | |
2426 | - dev_dbg(&serial->dev->dev, "%s\n", __func__); |
2427 | - |
2428 | - /* Loop through the serial ports setting up the private structures. |
2429 | - * Currently we only use one port. */ |
2430 | - for (i = 0; i < serial->num_ports; ++i) { |
2431 | - port = serial->port[i]; |
2432 | - |
2433 | - /* Declare memory. */ |
2434 | - metro_priv = kzalloc(sizeof(struct metrousb_private), GFP_KERNEL); |
2435 | - if (!metro_priv) |
2436 | - return -ENOMEM; |
2437 | - |
2438 | - /* Initialize memory. */ |
2439 | - spin_lock_init(&metro_priv->lock); |
2440 | - usb_set_serial_port_data(port, metro_priv); |
2441 | - |
2442 | - dev_dbg(&serial->dev->dev, "%s - port number=%d\n ", |
2443 | - __func__, port->number); |
2444 | - } |
2445 | + metro_priv = usb_get_serial_port_data(port); |
2446 | + kfree(metro_priv); |
2447 | |
2448 | return 0; |
2449 | } |
2450 | @@ -423,8 +396,8 @@ static struct usb_serial_driver metrousb_device = { |
2451 | .close = metrousb_cleanup, |
2452 | .read_int_callback = metrousb_read_int_callback, |
2453 | .write_int_callback = metrousb_write_int_callback, |
2454 | - .attach = metrousb_startup, |
2455 | - .release = metrousb_shutdown, |
2456 | + .port_probe = metrousb_port_probe, |
2457 | + .port_remove = metrousb_port_remove, |
2458 | .throttle = metrousb_throttle, |
2459 | .unthrottle = metrousb_unthrottle, |
2460 | .tiocmget = metrousb_tiocmget, |
2461 | diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c |
2462 | index a07dd3c..eb84767 100644 |
2463 | --- a/drivers/usb/serial/mos7720.c |
2464 | +++ b/drivers/usb/serial/mos7720.c |
2465 | @@ -2023,9 +2023,7 @@ static int mos7720_ioctl(struct tty_struct *tty, |
2466 | |
2467 | static int mos7720_startup(struct usb_serial *serial) |
2468 | { |
2469 | - struct moschip_port *mos7720_port; |
2470 | struct usb_device *dev; |
2471 | - int i; |
2472 | char data; |
2473 | u16 product; |
2474 | int ret_val; |
2475 | @@ -2063,29 +2061,6 @@ static int mos7720_startup(struct usb_serial *serial) |
2476 | serial->port[1]->interrupt_in_buffer = NULL; |
2477 | } |
2478 | |
2479 | - |
2480 | - /* set up serial port private structures */ |
2481 | - for (i = 0; i < serial->num_ports; ++i) { |
2482 | - mos7720_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL); |
2483 | - if (mos7720_port == NULL) { |
2484 | - dev_err(&dev->dev, "%s - Out of memory\n", __func__); |
2485 | - return -ENOMEM; |
2486 | - } |
2487 | - |
2488 | - /* Initialize all port interrupt end point to port 0 int |
2489 | - * endpoint. Our device has only one interrupt endpoint |
2490 | - * common to all ports */ |
2491 | - serial->port[i]->interrupt_in_endpointAddress = |
2492 | - serial->port[0]->interrupt_in_endpointAddress; |
2493 | - |
2494 | - mos7720_port->port = serial->port[i]; |
2495 | - usb_set_serial_port_data(serial->port[i], mos7720_port); |
2496 | - |
2497 | - dbg("port number is %d", serial->port[i]->number); |
2498 | - dbg("serial number is %d", serial->minor); |
2499 | - } |
2500 | - |
2501 | - |
2502 | /* setting configuration feature to one */ |
2503 | usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), |
2504 | (__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5*HZ); |
2505 | @@ -2113,8 +2088,6 @@ static int mos7720_startup(struct usb_serial *serial) |
2506 | |
2507 | static void mos7720_release(struct usb_serial *serial) |
2508 | { |
2509 | - int i; |
2510 | - |
2511 | #ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT |
2512 | /* close the parallel port */ |
2513 | |
2514 | @@ -2153,9 +2126,36 @@ static void mos7720_release(struct usb_serial *serial) |
2515 | kref_put(&mos_parport->ref_count, destroy_mos_parport); |
2516 | } |
2517 | #endif |
2518 | - /* free private structure allocated for serial port */ |
2519 | - for (i = 0; i < serial->num_ports; ++i) |
2520 | - kfree(usb_get_serial_port_data(serial->port[i])); |
2521 | +} |
2522 | + |
2523 | +static int mos7720_port_probe(struct usb_serial_port *port) |
2524 | +{ |
2525 | + struct moschip_port *mos7720_port; |
2526 | + |
2527 | + mos7720_port = kzalloc(sizeof(*mos7720_port), GFP_KERNEL); |
2528 | + if (!mos7720_port) |
2529 | + return -ENOMEM; |
2530 | + |
2531 | + /* Initialize all port interrupt end point to port 0 int endpoint. |
2532 | + * Our device has only one interrupt endpoint common to all ports. |
2533 | + */ |
2534 | + port->interrupt_in_endpointAddress = |
2535 | + port->serial->port[0]->interrupt_in_endpointAddress; |
2536 | + mos7720_port->port = port; |
2537 | + |
2538 | + usb_set_serial_port_data(port, mos7720_port); |
2539 | + |
2540 | + return 0; |
2541 | +} |
2542 | + |
2543 | +static int mos7720_port_remove(struct usb_serial_port *port) |
2544 | +{ |
2545 | + struct moschip_port *mos7720_port; |
2546 | + |
2547 | + mos7720_port = usb_get_serial_port_data(port); |
2548 | + kfree(mos7720_port); |
2549 | + |
2550 | + return 0; |
2551 | } |
2552 | |
2553 | static struct usb_serial_driver moschip7720_2port_driver = { |
2554 | @@ -2173,6 +2173,8 @@ static struct usb_serial_driver moschip7720_2port_driver = { |
2555 | .probe = mos77xx_probe, |
2556 | .attach = mos7720_startup, |
2557 | .release = mos7720_release, |
2558 | + .port_probe = mos7720_port_probe, |
2559 | + .port_remove = mos7720_port_remove, |
2560 | .ioctl = mos7720_ioctl, |
2561 | .tiocmget = mos7720_tiocmget, |
2562 | .tiocmset = mos7720_tiocmset, |
2563 | diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c |
2564 | index 2f6da1e..52e5ca7 100644 |
2565 | --- a/drivers/usb/serial/mos7840.c |
2566 | +++ b/drivers/usb/serial/mos7840.c |
2567 | @@ -218,12 +218,10 @@ struct moschip_port { |
2568 | int port_num; /*Actual port number in the device(1,2,etc) */ |
2569 | struct urb *write_urb; /* write URB for this port */ |
2570 | struct urb *read_urb; /* read URB for this port */ |
2571 | - struct urb *int_urb; |
2572 | __u8 shadowLCR; /* last LCR value received */ |
2573 | __u8 shadowMCR; /* last MCR value received */ |
2574 | char open; |
2575 | char open_ports; |
2576 | - char zombie; |
2577 | wait_queue_head_t wait_chase; /* for handling sleeping while waiting for chase to finish */ |
2578 | wait_queue_head_t delta_msr_wait; /* for handling sleeping while waiting for msr change to happen */ |
2579 | int delta_msr_cond; |
2580 | @@ -493,7 +491,6 @@ static void mos7840_control_callback(struct urb *urb) |
2581 | unsigned char *data; |
2582 | struct moschip_port *mos7840_port; |
2583 | __u8 regval = 0x0; |
2584 | - int result = 0; |
2585 | int status = urb->status; |
2586 | |
2587 | mos7840_port = urb->context; |
2588 | @@ -512,7 +509,7 @@ static void mos7840_control_callback(struct urb *urb) |
2589 | default: |
2590 | dbg("%s - nonzero urb status received: %d", __func__, |
2591 | status); |
2592 | - goto exit; |
2593 | + return; |
2594 | } |
2595 | |
2596 | dbg("%s urb buffer size is %d", __func__, urb->actual_length); |
2597 | @@ -525,17 +522,6 @@ static void mos7840_control_callback(struct urb *urb) |
2598 | mos7840_handle_new_msr(mos7840_port, regval); |
2599 | else if (mos7840_port->MsrLsr == 1) |
2600 | mos7840_handle_new_lsr(mos7840_port, regval); |
2601 | - |
2602 | -exit: |
2603 | - spin_lock(&mos7840_port->pool_lock); |
2604 | - if (!mos7840_port->zombie) |
2605 | - result = usb_submit_urb(mos7840_port->int_urb, GFP_ATOMIC); |
2606 | - spin_unlock(&mos7840_port->pool_lock); |
2607 | - if (result) { |
2608 | - dev_err(&urb->dev->dev, |
2609 | - "%s - Error %d submitting interrupt urb\n", |
2610 | - __func__, result); |
2611 | - } |
2612 | } |
2613 | |
2614 | static int mos7840_get_reg(struct moschip_port *mcs, __u16 Wval, __u16 reg, |
2615 | @@ -704,14 +690,7 @@ static void mos7840_interrupt_callback(struct urb *urb) |
2616 | wreg = MODEM_STATUS_REGISTER; |
2617 | break; |
2618 | } |
2619 | - spin_lock(&mos7840_port->pool_lock); |
2620 | - if (!mos7840_port->zombie) { |
2621 | - rv = mos7840_get_reg(mos7840_port, wval, wreg, &Data); |
2622 | - } else { |
2623 | - spin_unlock(&mos7840_port->pool_lock); |
2624 | - return; |
2625 | - } |
2626 | - spin_unlock(&mos7840_port->pool_lock); |
2627 | + rv = mos7840_get_reg(mos7840_port, wval, wreg, &Data); |
2628 | } |
2629 | } |
2630 | } |
2631 | @@ -2684,7 +2663,6 @@ error: |
2632 | kfree(mos7840_port->ctrl_buf); |
2633 | usb_free_urb(mos7840_port->control_urb); |
2634 | kfree(mos7840_port); |
2635 | - serial->port[i] = NULL; |
2636 | } |
2637 | return status; |
2638 | } |
2639 | @@ -2714,9 +2692,6 @@ static void mos7840_disconnect(struct usb_serial *serial) |
2640 | mos7840_port = mos7840_get_port_private(serial->port[i]); |
2641 | dbg ("mos7840_port %d = %p", i, mos7840_port); |
2642 | if (mos7840_port) { |
2643 | - spin_lock_irqsave(&mos7840_port->pool_lock, flags); |
2644 | - mos7840_port->zombie = 1; |
2645 | - spin_unlock_irqrestore(&mos7840_port->pool_lock, flags); |
2646 | usb_kill_urb(mos7840_port->control_urb); |
2647 | } |
2648 | } |
2649 | @@ -2754,6 +2729,7 @@ static void mos7840_release(struct usb_serial *serial) |
2650 | del_timer_sync(&mos7840_port->led_timer1); |
2651 | del_timer_sync(&mos7840_port->led_timer2); |
2652 | } |
2653 | + usb_free_urb(mos7840_port->control_urb); |
2654 | kfree(mos7840_port->ctrl_buf); |
2655 | kfree(mos7840_port->dr); |
2656 | kfree(mos7840_port); |
2657 | diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c |
2658 | index 6f3d705..27c9d06 100644 |
2659 | --- a/drivers/usb/serial/omninet.c |
2660 | +++ b/drivers/usb/serial/omninet.c |
2661 | @@ -46,8 +46,8 @@ static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port, |
2662 | const unsigned char *buf, int count); |
2663 | static int omninet_write_room(struct tty_struct *tty); |
2664 | static void omninet_disconnect(struct usb_serial *serial); |
2665 | -static void omninet_release(struct usb_serial *serial); |
2666 | -static int omninet_attach(struct usb_serial *serial); |
2667 | +static int omninet_port_probe(struct usb_serial_port *port); |
2668 | +static int omninet_port_remove(struct usb_serial_port *port); |
2669 | |
2670 | static const struct usb_device_id id_table[] = { |
2671 | { USB_DEVICE(ZYXEL_VENDOR_ID, ZYXEL_OMNINET_ID) }, |
2672 | @@ -64,7 +64,8 @@ static struct usb_serial_driver zyxel_omninet_device = { |
2673 | .description = "ZyXEL - omni.net lcd plus usb", |
2674 | .id_table = id_table, |
2675 | .num_ports = 1, |
2676 | - .attach = omninet_attach, |
2677 | + .port_probe = omninet_port_probe, |
2678 | + .port_remove = omninet_port_remove, |
2679 | .open = omninet_open, |
2680 | .close = omninet_close, |
2681 | .write = omninet_write, |
2682 | @@ -72,7 +73,6 @@ static struct usb_serial_driver zyxel_omninet_device = { |
2683 | .read_bulk_callback = omninet_read_bulk_callback, |
2684 | .write_bulk_callback = omninet_write_bulk_callback, |
2685 | .disconnect = omninet_disconnect, |
2686 | - .release = omninet_release, |
2687 | }; |
2688 | |
2689 | static struct usb_serial_driver * const serial_drivers[] = { |
2690 | @@ -114,18 +114,26 @@ struct omninet_data { |
2691 | __u8 od_outseq; /* Sequence number for bulk_out URBs */ |
2692 | }; |
2693 | |
2694 | -static int omninet_attach(struct usb_serial *serial) |
2695 | +static int omninet_port_probe(struct usb_serial_port *port) |
2696 | { |
2697 | struct omninet_data *od; |
2698 | - struct usb_serial_port *port = serial->port[0]; |
2699 | |
2700 | od = kmalloc(sizeof(struct omninet_data), GFP_KERNEL); |
2701 | - if (!od) { |
2702 | - dev_err(&port->dev, "%s- kmalloc(%Zd) failed.\n", |
2703 | - __func__, sizeof(struct omninet_data)); |
2704 | + if (!od) |
2705 | return -ENOMEM; |
2706 | - } |
2707 | + |
2708 | usb_set_serial_port_data(port, od); |
2709 | + |
2710 | + return 0; |
2711 | +} |
2712 | + |
2713 | +static int omninet_port_remove(struct usb_serial_port *port) |
2714 | +{ |
2715 | + struct omninet_data *od; |
2716 | + |
2717 | + od = usb_get_serial_port_data(port); |
2718 | + kfree(od); |
2719 | + |
2720 | return 0; |
2721 | } |
2722 | |
2723 | @@ -291,14 +299,6 @@ static void omninet_disconnect(struct usb_serial *serial) |
2724 | usb_kill_urb(wport->write_urb); |
2725 | } |
2726 | |
2727 | - |
2728 | -static void omninet_release(struct usb_serial *serial) |
2729 | -{ |
2730 | - struct usb_serial_port *port = serial->port[0]; |
2731 | - |
2732 | - kfree(usb_get_serial_port_data(port)); |
2733 | -} |
2734 | - |
2735 | module_usb_serial_driver(serial_drivers, id_table); |
2736 | |
2737 | MODULE_AUTHOR(DRIVER_AUTHOR); |
2738 | diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c |
2739 | index 02cb1b7..623358a 100644 |
2740 | --- a/drivers/usb/serial/opticon.c |
2741 | +++ b/drivers/usb/serial/opticon.c |
2742 | @@ -158,7 +158,11 @@ static int send_control_msg(struct usb_serial_port *port, u8 requesttype, |
2743 | { |
2744 | struct usb_serial *serial = port->serial; |
2745 | int retval; |
2746 | - u8 buffer[2]; |
2747 | + u8 *buffer; |
2748 | + |
2749 | + buffer = kzalloc(1, GFP_KERNEL); |
2750 | + if (!buffer) |
2751 | + return -ENOMEM; |
2752 | |
2753 | buffer[0] = val; |
2754 | /* Send the message to the vendor control endpoint |
2755 | @@ -167,6 +171,7 @@ static int send_control_msg(struct usb_serial_port *port, u8 requesttype, |
2756 | requesttype, |
2757 | USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_INTERFACE, |
2758 | 0, 0, buffer, 1, 0); |
2759 | + kfree(buffer); |
2760 | |
2761 | return retval; |
2762 | } |
2763 | @@ -284,7 +289,7 @@ static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port, |
2764 | if (!dr) { |
2765 | dev_err(&port->dev, "out of memory\n"); |
2766 | count = -ENOMEM; |
2767 | - goto error; |
2768 | + goto error_no_dr; |
2769 | } |
2770 | |
2771 | dr->bRequestType = USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT; |
2772 | @@ -314,6 +319,8 @@ static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port, |
2773 | |
2774 | return count; |
2775 | error: |
2776 | + kfree(dr); |
2777 | +error_no_dr: |
2778 | usb_free_urb(urb); |
2779 | error_no_urb: |
2780 | kfree(buffer); |
2781 | diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c |
2782 | index a0542ca..76a48e4 100644 |
2783 | --- a/drivers/usb/serial/option.c |
2784 | +++ b/drivers/usb/serial/option.c |
2785 | @@ -47,6 +47,7 @@ |
2786 | /* Function prototypes */ |
2787 | static int option_probe(struct usb_serial *serial, |
2788 | const struct usb_device_id *id); |
2789 | +static int option_attach(struct usb_serial *serial); |
2790 | static void option_release(struct usb_serial *serial); |
2791 | static int option_send_setup(struct usb_serial_port *port); |
2792 | static void option_instat_callback(struct urb *urb); |
2793 | @@ -1288,8 +1289,9 @@ static struct usb_serial_driver option_1port_device = { |
2794 | .tiocmget = usb_wwan_tiocmget, |
2795 | .tiocmset = usb_wwan_tiocmset, |
2796 | .ioctl = usb_wwan_ioctl, |
2797 | - .attach = usb_wwan_startup, |
2798 | + .attach = option_attach, |
2799 | .release = option_release, |
2800 | + .port_probe = usb_wwan_port_probe, |
2801 | .port_remove = usb_wwan_port_remove, |
2802 | .read_int_callback = option_instat_callback, |
2803 | #ifdef CONFIG_PM |
2804 | @@ -1337,8 +1339,6 @@ static bool is_blacklisted(const u8 ifnum, enum option_blacklist_reason reason, |
2805 | static int option_probe(struct usb_serial *serial, |
2806 | const struct usb_device_id *id) |
2807 | { |
2808 | - struct usb_wwan_intf_private *data; |
2809 | - struct option_private *priv; |
2810 | struct usb_interface_descriptor *iface_desc = |
2811 | &serial->interface->cur_altsetting->desc; |
2812 | struct usb_device_descriptor *dev_desc = &serial->dev->descriptor; |
2813 | @@ -1376,6 +1376,19 @@ static int option_probe(struct usb_serial *serial, |
2814 | iface_desc->bInterfaceClass != USB_CLASS_CDC_DATA) |
2815 | return -ENODEV; |
2816 | |
2817 | + /* Store device id so we can use it during attach. */ |
2818 | + usb_set_serial_data(serial, (void *)id); |
2819 | + |
2820 | + return 0; |
2821 | +} |
2822 | + |
2823 | +static int option_attach(struct usb_serial *serial) |
2824 | +{ |
2825 | + struct usb_interface_descriptor *iface_desc; |
2826 | + const struct usb_device_id *id; |
2827 | + struct usb_wwan_intf_private *data; |
2828 | + struct option_private *priv; |
2829 | + |
2830 | data = kzalloc(sizeof(struct usb_wwan_intf_private), GFP_KERNEL); |
2831 | if (!data) |
2832 | return -ENOMEM; |
2833 | @@ -1386,6 +1399,10 @@ static int option_probe(struct usb_serial *serial, |
2834 | return -ENOMEM; |
2835 | } |
2836 | |
2837 | + /* Retrieve device id stored at probe. */ |
2838 | + id = usb_get_serial_data(serial); |
2839 | + iface_desc = &serial->interface->cur_altsetting->desc; |
2840 | + |
2841 | priv->bInterfaceNumber = iface_desc->bInterfaceNumber; |
2842 | data->private = priv; |
2843 | |
2844 | diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c |
2845 | index bfd5077..93232ca 100644 |
2846 | --- a/drivers/usb/serial/qcserial.c |
2847 | +++ b/drivers/usb/serial/qcserial.c |
2848 | @@ -140,7 +140,6 @@ MODULE_DEVICE_TABLE(usb, id_table); |
2849 | |
2850 | static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) |
2851 | { |
2852 | - struct usb_wwan_intf_private *data; |
2853 | struct usb_host_interface *intf = serial->interface->cur_altsetting; |
2854 | struct device *dev = &serial->dev->dev; |
2855 | int retval = -ENODEV; |
2856 | @@ -156,13 +155,6 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) |
2857 | ifnum = intf->desc.bInterfaceNumber; |
2858 | dev_dbg(dev, "This Interface = %d\n", ifnum); |
2859 | |
2860 | - data = kzalloc(sizeof(struct usb_wwan_intf_private), |
2861 | - GFP_KERNEL); |
2862 | - if (!data) |
2863 | - return -ENOMEM; |
2864 | - |
2865 | - spin_lock_init(&data->susp_lock); |
2866 | - |
2867 | if (nintf == 1) { |
2868 | /* QDL mode */ |
2869 | /* Gobi 2000 has a single altsetting, older ones have two */ |
2870 | @@ -255,20 +247,28 @@ done: |
2871 | } |
2872 | } |
2873 | |
2874 | - /* Set serial->private if not returning error */ |
2875 | - if (retval == 0) |
2876 | - usb_set_serial_data(serial, data); |
2877 | - else |
2878 | - kfree(data); |
2879 | - |
2880 | return retval; |
2881 | } |
2882 | |
2883 | +static int qc_attach(struct usb_serial *serial) |
2884 | +{ |
2885 | + struct usb_wwan_intf_private *data; |
2886 | + |
2887 | + data = kzalloc(sizeof(*data), GFP_KERNEL); |
2888 | + if (!data) |
2889 | + return -ENOMEM; |
2890 | + |
2891 | + spin_lock_init(&data->susp_lock); |
2892 | + |
2893 | + usb_set_serial_data(serial, data); |
2894 | + |
2895 | + return 0; |
2896 | +} |
2897 | + |
2898 | static void qc_release(struct usb_serial *serial) |
2899 | { |
2900 | struct usb_wwan_intf_private *priv = usb_get_serial_data(serial); |
2901 | |
2902 | - /* Free the private data allocated in qcprobe */ |
2903 | usb_set_serial_data(serial, NULL); |
2904 | kfree(priv); |
2905 | } |
2906 | @@ -287,8 +287,9 @@ static struct usb_serial_driver qcdevice = { |
2907 | .write = usb_wwan_write, |
2908 | .write_room = usb_wwan_write_room, |
2909 | .chars_in_buffer = usb_wwan_chars_in_buffer, |
2910 | - .attach = usb_wwan_startup, |
2911 | + .attach = qc_attach, |
2912 | .release = qc_release, |
2913 | + .port_probe = usb_wwan_port_probe, |
2914 | .port_remove = usb_wwan_port_remove, |
2915 | #ifdef CONFIG_PM |
2916 | .suspend = usb_wwan_suspend, |
2917 | diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c |
2918 | index 151670b..ea69301 100644 |
2919 | --- a/drivers/usb/serial/quatech2.c |
2920 | +++ b/drivers/usb/serial/quatech2.c |
2921 | @@ -145,12 +145,12 @@ static void qt2_read_bulk_callback(struct urb *urb); |
2922 | |
2923 | static void qt2_release(struct usb_serial *serial) |
2924 | { |
2925 | - int i; |
2926 | + struct qt2_serial_private *serial_priv; |
2927 | |
2928 | - kfree(usb_get_serial_data(serial)); |
2929 | + serial_priv = usb_get_serial_data(serial); |
2930 | |
2931 | - for (i = 0; i < serial->num_ports; i++) |
2932 | - kfree(usb_get_serial_port_data(serial->port[i])); |
2933 | + usb_free_urb(serial_priv->read_urb); |
2934 | + kfree(serial_priv); |
2935 | } |
2936 | |
2937 | static inline int calc_baud_divisor(int baudrate) |
2938 | @@ -425,11 +425,16 @@ static void qt2_close(struct usb_serial_port *port) |
2939 | port_priv->is_open = false; |
2940 | |
2941 | spin_lock_irqsave(&port_priv->urb_lock, flags); |
2942 | - if (port_priv->write_urb->status == -EINPROGRESS) |
2943 | - usb_kill_urb(port_priv->write_urb); |
2944 | + usb_kill_urb(port_priv->write_urb); |
2945 | port_priv->urb_in_use = false; |
2946 | spin_unlock_irqrestore(&port_priv->urb_lock, flags); |
2947 | |
2948 | + mutex_lock(&port->serial->disc_mutex); |
2949 | + if (port->serial->disconnected) { |
2950 | + mutex_unlock(&port->serial->disc_mutex); |
2951 | + return; |
2952 | + } |
2953 | + |
2954 | /* flush the port transmit buffer */ |
2955 | i = usb_control_msg(serial->dev, |
2956 | usb_rcvctrlpipe(serial->dev, 0), |
2957 | @@ -461,26 +466,14 @@ static void qt2_close(struct usb_serial_port *port) |
2958 | dev_err(&port->dev, "%s - close port failed %i\n", |
2959 | __func__, i); |
2960 | |
2961 | + mutex_unlock(&port->serial->disc_mutex); |
2962 | } |
2963 | |
2964 | static void qt2_disconnect(struct usb_serial *serial) |
2965 | { |
2966 | struct qt2_serial_private *serial_priv = usb_get_serial_data(serial); |
2967 | - struct qt2_port_private *port_priv; |
2968 | - int i; |
2969 | - |
2970 | - if (serial_priv->read_urb->status == -EINPROGRESS) |
2971 | - usb_kill_urb(serial_priv->read_urb); |
2972 | - |
2973 | - usb_free_urb(serial_priv->read_urb); |
2974 | |
2975 | - for (i = 0; i < serial->num_ports; i++) { |
2976 | - port_priv = usb_get_serial_port_data(serial->port[i]); |
2977 | - |
2978 | - if (port_priv->write_urb->status == -EINPROGRESS) |
2979 | - usb_kill_urb(port_priv->write_urb); |
2980 | - usb_free_urb(port_priv->write_urb); |
2981 | - } |
2982 | + usb_kill_urb(serial_priv->read_urb); |
2983 | } |
2984 | |
2985 | static int get_serial_info(struct usb_serial_port *port, |
2986 | @@ -775,11 +768,9 @@ static void qt2_read_bulk_callback(struct urb *urb) |
2987 | |
2988 | static int qt2_setup_urbs(struct usb_serial *serial) |
2989 | { |
2990 | - struct usb_serial_port *port; |
2991 | struct usb_serial_port *port0; |
2992 | struct qt2_serial_private *serial_priv; |
2993 | - struct qt2_port_private *port_priv; |
2994 | - int pcount, status; |
2995 | + int status; |
2996 | |
2997 | port0 = serial->port[0]; |
2998 | |
2999 | @@ -797,46 +788,21 @@ static int qt2_setup_urbs(struct usb_serial *serial) |
3000 | sizeof(serial_priv->read_buffer), |
3001 | qt2_read_bulk_callback, serial); |
3002 | |
3003 | - /* setup write_urb for each port */ |
3004 | - for (pcount = 0; pcount < serial->num_ports; pcount++) { |
3005 | - |
3006 | - port = serial->port[pcount]; |
3007 | - port_priv = usb_get_serial_port_data(port); |
3008 | - |
3009 | - port_priv->write_urb = usb_alloc_urb(0, GFP_KERNEL); |
3010 | - if (!port_priv->write_urb) { |
3011 | - dev_err(&serial->dev->dev, |
3012 | - "failed to alloc write_urb for port %i\n", |
3013 | - pcount); |
3014 | - return -ENOMEM; |
3015 | - } |
3016 | - |
3017 | - usb_fill_bulk_urb(port_priv->write_urb, |
3018 | - serial->dev, |
3019 | - usb_sndbulkpipe(serial->dev, |
3020 | - port0-> |
3021 | - bulk_out_endpointAddress), |
3022 | - port_priv->write_buffer, |
3023 | - sizeof(port_priv->write_buffer), |
3024 | - qt2_write_bulk_callback, port); |
3025 | - } |
3026 | - |
3027 | status = usb_submit_urb(serial_priv->read_urb, GFP_KERNEL); |
3028 | if (status != 0) { |
3029 | dev_err(&serial->dev->dev, |
3030 | "%s - submit read urb failed %i\n", __func__, status); |
3031 | + usb_free_urb(serial_priv->read_urb); |
3032 | return status; |
3033 | } |
3034 | |
3035 | return 0; |
3036 | - |
3037 | } |
3038 | |
3039 | static int qt2_attach(struct usb_serial *serial) |
3040 | { |
3041 | struct qt2_serial_private *serial_priv; |
3042 | - struct qt2_port_private *port_priv; |
3043 | - int status, pcount; |
3044 | + int status; |
3045 | |
3046 | /* power on unit */ |
3047 | status = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), |
3048 | @@ -856,26 +822,6 @@ static int qt2_attach(struct usb_serial *serial) |
3049 | |
3050 | usb_set_serial_data(serial, serial_priv); |
3051 | |
3052 | - for (pcount = 0; pcount < serial->num_ports; pcount++) { |
3053 | - port_priv = kzalloc(sizeof(*port_priv), GFP_KERNEL); |
3054 | - if (!port_priv) { |
3055 | - dev_err(&serial->dev->dev, |
3056 | - "%s- kmalloc(%Zd) failed.\n", __func__, |
3057 | - sizeof(*port_priv)); |
3058 | - pcount--; |
3059 | - status = -ENOMEM; |
3060 | - goto attach_failed; |
3061 | - } |
3062 | - |
3063 | - spin_lock_init(&port_priv->lock); |
3064 | - spin_lock_init(&port_priv->urb_lock); |
3065 | - init_waitqueue_head(&port_priv->delta_msr_wait); |
3066 | - |
3067 | - port_priv->port = serial->port[pcount]; |
3068 | - |
3069 | - usb_set_serial_port_data(serial->port[pcount], port_priv); |
3070 | - } |
3071 | - |
3072 | status = qt2_setup_urbs(serial); |
3073 | if (status != 0) |
3074 | goto attach_failed; |
3075 | @@ -883,14 +829,53 @@ static int qt2_attach(struct usb_serial *serial) |
3076 | return 0; |
3077 | |
3078 | attach_failed: |
3079 | - for (/* empty */; pcount >= 0; pcount--) { |
3080 | - port_priv = usb_get_serial_port_data(serial->port[pcount]); |
3081 | - kfree(port_priv); |
3082 | - } |
3083 | kfree(serial_priv); |
3084 | return status; |
3085 | } |
3086 | |
3087 | +static int qt2_port_probe(struct usb_serial_port *port) |
3088 | +{ |
3089 | + struct usb_serial *serial = port->serial; |
3090 | + struct qt2_port_private *port_priv; |
3091 | + u8 bEndpointAddress; |
3092 | + |
3093 | + port_priv = kzalloc(sizeof(*port_priv), GFP_KERNEL); |
3094 | + if (!port_priv) |
3095 | + return -ENOMEM; |
3096 | + |
3097 | + spin_lock_init(&port_priv->lock); |
3098 | + spin_lock_init(&port_priv->urb_lock); |
3099 | + init_waitqueue_head(&port_priv->delta_msr_wait); |
3100 | + port_priv->port = port; |
3101 | + |
3102 | + port_priv->write_urb = usb_alloc_urb(0, GFP_KERNEL); |
3103 | + if (!port_priv->write_urb) { |
3104 | + kfree(port_priv); |
3105 | + return -ENOMEM; |
3106 | + } |
3107 | + bEndpointAddress = serial->port[0]->bulk_out_endpointAddress; |
3108 | + usb_fill_bulk_urb(port_priv->write_urb, serial->dev, |
3109 | + usb_sndbulkpipe(serial->dev, bEndpointAddress), |
3110 | + port_priv->write_buffer, |
3111 | + sizeof(port_priv->write_buffer), |
3112 | + qt2_write_bulk_callback, port); |
3113 | + |
3114 | + usb_set_serial_port_data(port, port_priv); |
3115 | + |
3116 | + return 0; |
3117 | +} |
3118 | + |
3119 | +static int qt2_port_remove(struct usb_serial_port *port) |
3120 | +{ |
3121 | + struct qt2_port_private *port_priv; |
3122 | + |
3123 | + port_priv = usb_get_serial_port_data(port); |
3124 | + usb_free_urb(port_priv->write_urb); |
3125 | + kfree(port_priv); |
3126 | + |
3127 | + return 0; |
3128 | +} |
3129 | + |
3130 | static int qt2_tiocmget(struct tty_struct *tty) |
3131 | { |
3132 | struct usb_serial_port *port = tty->driver_data; |
3133 | @@ -1129,6 +1114,8 @@ static struct usb_serial_driver qt2_device = { |
3134 | .attach = qt2_attach, |
3135 | .release = qt2_release, |
3136 | .disconnect = qt2_disconnect, |
3137 | + .port_probe = qt2_port_probe, |
3138 | + .port_remove = qt2_port_remove, |
3139 | .dtr_rts = qt2_dtr_rts, |
3140 | .break_ctl = qt2_break_ctl, |
3141 | .tiocmget = qt2_tiocmget, |
3142 | diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c |
3143 | index 0274710..cf6d149 100644 |
3144 | --- a/drivers/usb/serial/sierra.c |
3145 | +++ b/drivers/usb/serial/sierra.c |
3146 | @@ -162,7 +162,6 @@ static int sierra_probe(struct usb_serial *serial, |
3147 | { |
3148 | int result = 0; |
3149 | struct usb_device *udev; |
3150 | - struct sierra_intf_private *data; |
3151 | u8 ifnum; |
3152 | |
3153 | udev = serial->dev; |
3154 | @@ -189,11 +188,6 @@ static int sierra_probe(struct usb_serial *serial, |
3155 | return -ENODEV; |
3156 | } |
3157 | |
3158 | - data = serial->private = kzalloc(sizeof(struct sierra_intf_private), GFP_KERNEL); |
3159 | - if (!data) |
3160 | - return -ENOMEM; |
3161 | - spin_lock_init(&data->susp_lock); |
3162 | - |
3163 | return result; |
3164 | } |
3165 | |
3166 | @@ -886,11 +880,15 @@ static void sierra_dtr_rts(struct usb_serial_port *port, int on) |
3167 | |
3168 | static int sierra_startup(struct usb_serial *serial) |
3169 | { |
3170 | - struct usb_serial_port *port; |
3171 | - struct sierra_port_private *portdata; |
3172 | - struct sierra_iface_info *himemoryp = NULL; |
3173 | - int i; |
3174 | - u8 ifnum; |
3175 | + struct sierra_intf_private *intfdata; |
3176 | + |
3177 | + intfdata = kzalloc(sizeof(*intfdata), GFP_KERNEL); |
3178 | + if (!intfdata) |
3179 | + return -ENOMEM; |
3180 | + |
3181 | + spin_lock_init(&intfdata->susp_lock); |
3182 | + |
3183 | + usb_set_serial_data(serial, intfdata); |
3184 | |
3185 | /* Set Device mode to D0 */ |
3186 | sierra_set_power_state(serial->dev, 0x0000); |
3187 | @@ -899,68 +897,71 @@ static int sierra_startup(struct usb_serial *serial) |
3188 | if (nmea) |
3189 | sierra_vsc_set_nmea(serial->dev, 1); |
3190 | |
3191 | - /* Now setup per port private data */ |
3192 | - for (i = 0; i < serial->num_ports; i++) { |
3193 | - port = serial->port[i]; |
3194 | - portdata = kzalloc(sizeof(*portdata), GFP_KERNEL); |
3195 | - if (!portdata) { |
3196 | - dev_dbg(&port->dev, "%s: kmalloc for " |
3197 | - "sierra_port_private (%d) failed!\n", |
3198 | - __func__, i); |
3199 | - return -ENOMEM; |
3200 | - } |
3201 | - spin_lock_init(&portdata->lock); |
3202 | - init_usb_anchor(&portdata->active); |
3203 | - init_usb_anchor(&portdata->delayed); |
3204 | - ifnum = i; |
3205 | - /* Assume low memory requirements */ |
3206 | - portdata->num_out_urbs = N_OUT_URB; |
3207 | - portdata->num_in_urbs = N_IN_URB; |
3208 | - |
3209 | - /* Determine actual memory requirements */ |
3210 | - if (serial->num_ports == 1) { |
3211 | - /* Get interface number for composite device */ |
3212 | - ifnum = sierra_calc_interface(serial); |
3213 | - himemoryp = |
3214 | - (struct sierra_iface_info *)&typeB_interface_list; |
3215 | - if (is_himemory(ifnum, himemoryp)) { |
3216 | - portdata->num_out_urbs = N_OUT_URB_HM; |
3217 | - portdata->num_in_urbs = N_IN_URB_HM; |
3218 | - } |
3219 | - } |
3220 | - else { |
3221 | - himemoryp = |
3222 | - (struct sierra_iface_info *)&typeA_interface_list; |
3223 | - if (is_himemory(i, himemoryp)) { |
3224 | - portdata->num_out_urbs = N_OUT_URB_HM; |
3225 | - portdata->num_in_urbs = N_IN_URB_HM; |
3226 | - } |
3227 | - } |
3228 | - dev_dbg(&serial->dev->dev, |
3229 | - "Memory usage (urbs) interface #%d, in=%d, out=%d\n", |
3230 | - ifnum,portdata->num_in_urbs, portdata->num_out_urbs ); |
3231 | - /* Set the port private data pointer */ |
3232 | - usb_set_serial_port_data(port, portdata); |
3233 | - } |
3234 | - |
3235 | return 0; |
3236 | } |
3237 | |
3238 | static void sierra_release(struct usb_serial *serial) |
3239 | { |
3240 | - int i; |
3241 | - struct usb_serial_port *port; |
3242 | + struct sierra_intf_private *intfdata; |
3243 | + |
3244 | + intfdata = usb_get_serial_data(serial); |
3245 | + kfree(intfdata); |
3246 | +} |
3247 | + |
3248 | +static int sierra_port_probe(struct usb_serial_port *port) |
3249 | +{ |
3250 | + struct usb_serial *serial = port->serial; |
3251 | struct sierra_port_private *portdata; |
3252 | + const struct sierra_iface_info *himemoryp; |
3253 | + u8 ifnum; |
3254 | |
3255 | - for (i = 0; i < serial->num_ports; ++i) { |
3256 | - port = serial->port[i]; |
3257 | - if (!port) |
3258 | - continue; |
3259 | - portdata = usb_get_serial_port_data(port); |
3260 | - if (!portdata) |
3261 | - continue; |
3262 | - kfree(portdata); |
3263 | + portdata = kzalloc(sizeof(*portdata), GFP_KERNEL); |
3264 | + if (!portdata) |
3265 | + return -ENOMEM; |
3266 | + |
3267 | + spin_lock_init(&portdata->lock); |
3268 | + init_usb_anchor(&portdata->active); |
3269 | + init_usb_anchor(&portdata->delayed); |
3270 | + |
3271 | + /* Assume low memory requirements */ |
3272 | + portdata->num_out_urbs = N_OUT_URB; |
3273 | + portdata->num_in_urbs = N_IN_URB; |
3274 | + |
3275 | + /* Determine actual memory requirements */ |
3276 | + if (serial->num_ports == 1) { |
3277 | + /* Get interface number for composite device */ |
3278 | + ifnum = sierra_calc_interface(serial); |
3279 | + himemoryp = &typeB_interface_list; |
3280 | + } else { |
3281 | + /* This is really the usb-serial port number of the interface |
3282 | + * rather than the interface number. |
3283 | + */ |
3284 | + ifnum = port->number - serial->minor; |
3285 | + himemoryp = &typeA_interface_list; |
3286 | } |
3287 | + |
3288 | + if (is_himemory(ifnum, himemoryp)) { |
3289 | + portdata->num_out_urbs = N_OUT_URB_HM; |
3290 | + portdata->num_in_urbs = N_IN_URB_HM; |
3291 | + } |
3292 | + |
3293 | + dev_dbg(&port->dev, |
3294 | + "Memory usage (urbs) interface #%d, in=%d, out=%d\n", |
3295 | + ifnum, portdata->num_in_urbs, portdata->num_out_urbs); |
3296 | + |
3297 | + usb_set_serial_port_data(port, portdata); |
3298 | + |
3299 | + return 0; |
3300 | +} |
3301 | + |
3302 | +static int sierra_port_remove(struct usb_serial_port *port) |
3303 | +{ |
3304 | + struct sierra_port_private *portdata; |
3305 | + |
3306 | + portdata = usb_get_serial_port_data(port); |
3307 | + kfree(portdata); |
3308 | + |
3309 | + return 0; |
3310 | } |
3311 | |
3312 | #ifdef CONFIG_PM |
3313 | @@ -1064,6 +1065,8 @@ static struct usb_serial_driver sierra_device = { |
3314 | .tiocmset = sierra_tiocmset, |
3315 | .attach = sierra_startup, |
3316 | .release = sierra_release, |
3317 | + .port_probe = sierra_port_probe, |
3318 | + .port_remove = sierra_port_remove, |
3319 | .suspend = sierra_suspend, |
3320 | .resume = sierra_resume, |
3321 | .read_int_callback = sierra_instat_callback, |
3322 | diff --git a/drivers/usb/serial/usb-wwan.h b/drivers/usb/serial/usb-wwan.h |
3323 | index 1f034d2..684739b 100644 |
3324 | --- a/drivers/usb/serial/usb-wwan.h |
3325 | +++ b/drivers/usb/serial/usb-wwan.h |
3326 | @@ -8,7 +8,7 @@ |
3327 | extern void usb_wwan_dtr_rts(struct usb_serial_port *port, int on); |
3328 | extern int usb_wwan_open(struct tty_struct *tty, struct usb_serial_port *port); |
3329 | extern void usb_wwan_close(struct usb_serial_port *port); |
3330 | -extern int usb_wwan_startup(struct usb_serial *serial); |
3331 | +extern int usb_wwan_port_probe(struct usb_serial_port *port); |
3332 | extern int usb_wwan_port_remove(struct usb_serial_port *port); |
3333 | extern int usb_wwan_write_room(struct tty_struct *tty); |
3334 | extern void usb_wwan_set_termios(struct tty_struct *tty, |
3335 | diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c |
3336 | index 6855d5e..2f2d074 100644 |
3337 | --- a/drivers/usb/serial/usb_wwan.c |
3338 | +++ b/drivers/usb/serial/usb_wwan.c |
3339 | @@ -447,10 +447,12 @@ void usb_wwan_close(struct usb_serial_port *port) |
3340 | EXPORT_SYMBOL(usb_wwan_close); |
3341 | |
3342 | /* Helper functions used by usb_wwan_setup_urbs */ |
3343 | -static struct urb *usb_wwan_setup_urb(struct usb_serial *serial, int endpoint, |
3344 | +static struct urb *usb_wwan_setup_urb(struct usb_serial_port *port, |
3345 | + int endpoint, |
3346 | int dir, void *ctx, char *buf, int len, |
3347 | void (*callback) (struct urb *)) |
3348 | { |
3349 | + struct usb_serial *serial = port->serial; |
3350 | struct urb *urb; |
3351 | |
3352 | if (endpoint == -1) |
3353 | @@ -470,100 +472,74 @@ static struct urb *usb_wwan_setup_urb(struct usb_serial *serial, int endpoint, |
3354 | return urb; |
3355 | } |
3356 | |
3357 | -/* Setup urbs */ |
3358 | -static void usb_wwan_setup_urbs(struct usb_serial *serial) |
3359 | +int usb_wwan_port_probe(struct usb_serial_port *port) |
3360 | { |
3361 | - int i, j; |
3362 | - struct usb_serial_port *port; |
3363 | struct usb_wwan_port_private *portdata; |
3364 | + struct urb *urb; |
3365 | + u8 *buffer; |
3366 | + int err; |
3367 | + int i; |
3368 | |
3369 | - for (i = 0; i < serial->num_ports; i++) { |
3370 | - port = serial->port[i]; |
3371 | - portdata = usb_get_serial_port_data(port); |
3372 | - |
3373 | - /* Do indat endpoints first */ |
3374 | - for (j = 0; j < N_IN_URB; ++j) { |
3375 | - portdata->in_urbs[j] = usb_wwan_setup_urb(serial, |
3376 | - port-> |
3377 | - bulk_in_endpointAddress, |
3378 | - USB_DIR_IN, |
3379 | - port, |
3380 | - portdata-> |
3381 | - in_buffer[j], |
3382 | - IN_BUFLEN, |
3383 | - usb_wwan_indat_callback); |
3384 | - } |
3385 | - |
3386 | - /* outdat endpoints */ |
3387 | - for (j = 0; j < N_OUT_URB; ++j) { |
3388 | - portdata->out_urbs[j] = usb_wwan_setup_urb(serial, |
3389 | - port-> |
3390 | - bulk_out_endpointAddress, |
3391 | - USB_DIR_OUT, |
3392 | - port, |
3393 | - portdata-> |
3394 | - out_buffer |
3395 | - [j], |
3396 | - OUT_BUFLEN, |
3397 | - usb_wwan_outdat_callback); |
3398 | - } |
3399 | - } |
3400 | -} |
3401 | + portdata = kzalloc(sizeof(*portdata), GFP_KERNEL); |
3402 | + if (!portdata) |
3403 | + return -ENOMEM; |
3404 | |
3405 | -int usb_wwan_startup(struct usb_serial *serial) |
3406 | -{ |
3407 | - int i, j, err; |
3408 | - struct usb_serial_port *port; |
3409 | - struct usb_wwan_port_private *portdata; |
3410 | - u8 *buffer; |
3411 | + init_usb_anchor(&portdata->delayed); |
3412 | |
3413 | - /* Now setup per port private data */ |
3414 | - for (i = 0; i < serial->num_ports; i++) { |
3415 | - port = serial->port[i]; |
3416 | - portdata = kzalloc(sizeof(*portdata), GFP_KERNEL); |
3417 | - if (!portdata) { |
3418 | - dbg("%s: kmalloc for usb_wwan_port_private (%d) failed!.", |
3419 | - __func__, i); |
3420 | - return 1; |
3421 | - } |
3422 | - init_usb_anchor(&portdata->delayed); |
3423 | + for (i = 0; i < N_IN_URB; i++) { |
3424 | + buffer = (u8 *)__get_free_page(GFP_KERNEL); |
3425 | + if (!buffer) |
3426 | + goto bail_out_error; |
3427 | + portdata->in_buffer[i] = buffer; |
3428 | + |
3429 | + urb = usb_wwan_setup_urb(port, port->bulk_in_endpointAddress, |
3430 | + USB_DIR_IN, port, |
3431 | + buffer, IN_BUFLEN, |
3432 | + usb_wwan_indat_callback); |
3433 | + portdata->in_urbs[i] = urb; |
3434 | + } |
3435 | + for (i = 0; i < N_OUT_URB; i++) { |
3436 | + if (port->bulk_out_endpointAddress == -1) |
3437 | + continue; |
3438 | |
3439 | - for (j = 0; j < N_IN_URB; j++) { |
3440 | - buffer = (u8 *) __get_free_page(GFP_KERNEL); |
3441 | - if (!buffer) |
3442 | - goto bail_out_error; |
3443 | - portdata->in_buffer[j] = buffer; |
3444 | - } |
3445 | + buffer = kmalloc(OUT_BUFLEN, GFP_KERNEL); |
3446 | + if (!buffer) |
3447 | + goto bail_out_error2; |
3448 | + portdata->out_buffer[i] = buffer; |
3449 | |
3450 | - for (j = 0; j < N_OUT_URB; j++) { |
3451 | - buffer = kmalloc(OUT_BUFLEN, GFP_KERNEL); |
3452 | - if (!buffer) |
3453 | - goto bail_out_error2; |
3454 | - portdata->out_buffer[j] = buffer; |
3455 | - } |
3456 | + urb = usb_wwan_setup_urb(port, port->bulk_out_endpointAddress, |
3457 | + USB_DIR_OUT, port, |
3458 | + buffer, OUT_BUFLEN, |
3459 | + usb_wwan_outdat_callback); |
3460 | + portdata->out_urbs[i] = urb; |
3461 | + } |
3462 | |
3463 | - usb_set_serial_port_data(port, portdata); |
3464 | + usb_set_serial_port_data(port, portdata); |
3465 | |
3466 | - if (!port->interrupt_in_urb) |
3467 | - continue; |
3468 | + if (port->interrupt_in_urb) { |
3469 | err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); |
3470 | if (err) |
3471 | - dbg("%s: submit irq_in urb failed %d", __func__, err); |
3472 | + dev_dbg(&port->dev, "%s: submit irq_in urb failed %d\n", |
3473 | + __func__, err); |
3474 | } |
3475 | - usb_wwan_setup_urbs(serial); |
3476 | + |
3477 | return 0; |
3478 | |
3479 | bail_out_error2: |
3480 | - for (j = 0; j < N_OUT_URB; j++) |
3481 | - kfree(portdata->out_buffer[j]); |
3482 | + for (i = 0; i < N_OUT_URB; i++) { |
3483 | + usb_free_urb(portdata->out_urbs[i]); |
3484 | + kfree(portdata->out_buffer[i]); |
3485 | + } |
3486 | bail_out_error: |
3487 | - for (j = 0; j < N_IN_URB; j++) |
3488 | - if (portdata->in_buffer[j]) |
3489 | - free_page((unsigned long)portdata->in_buffer[j]); |
3490 | + for (i = 0; i < N_IN_URB; i++) { |
3491 | + usb_free_urb(portdata->in_urbs[i]); |
3492 | + free_page((unsigned long)portdata->in_buffer[i]); |
3493 | + } |
3494 | kfree(portdata); |
3495 | - return 1; |
3496 | + |
3497 | + return -ENOMEM; |
3498 | } |
3499 | -EXPORT_SYMBOL(usb_wwan_startup); |
3500 | +EXPORT_SYMBOL_GPL(usb_wwan_port_probe); |
3501 | |
3502 | int usb_wwan_port_remove(struct usb_serial_port *port) |
3503 | { |
3504 | diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c |
3505 | index 473635e..bd36321 100644 |
3506 | --- a/drivers/usb/serial/whiteheat.c |
3507 | +++ b/drivers/usb/serial/whiteheat.c |
3508 | @@ -86,6 +86,8 @@ static int whiteheat_firmware_attach(struct usb_serial *serial); |
3509 | /* function prototypes for the Connect Tech WhiteHEAT serial converter */ |
3510 | static int whiteheat_attach(struct usb_serial *serial); |
3511 | static void whiteheat_release(struct usb_serial *serial); |
3512 | +static int whiteheat_port_probe(struct usb_serial_port *port); |
3513 | +static int whiteheat_port_remove(struct usb_serial_port *port); |
3514 | static int whiteheat_open(struct tty_struct *tty, |
3515 | struct usb_serial_port *port); |
3516 | static void whiteheat_close(struct usb_serial_port *port); |
3517 | @@ -120,6 +122,8 @@ static struct usb_serial_driver whiteheat_device = { |
3518 | .num_ports = 4, |
3519 | .attach = whiteheat_attach, |
3520 | .release = whiteheat_release, |
3521 | + .port_probe = whiteheat_port_probe, |
3522 | + .port_remove = whiteheat_port_remove, |
3523 | .open = whiteheat_open, |
3524 | .close = whiteheat_close, |
3525 | .ioctl = whiteheat_ioctl, |
3526 | @@ -290,15 +294,12 @@ static int whiteheat_attach(struct usb_serial *serial) |
3527 | { |
3528 | struct usb_serial_port *command_port; |
3529 | struct whiteheat_command_private *command_info; |
3530 | - struct usb_serial_port *port; |
3531 | - struct whiteheat_private *info; |
3532 | struct whiteheat_hw_info *hw_info; |
3533 | int pipe; |
3534 | int ret; |
3535 | int alen; |
3536 | __u8 *command; |
3537 | __u8 *result; |
3538 | - int i; |
3539 | |
3540 | command_port = serial->port[COMMAND_PORT]; |
3541 | |
3542 | @@ -357,22 +358,6 @@ static int whiteheat_attach(struct usb_serial *serial) |
3543 | serial->type->description, |
3544 | hw_info->sw_major_rev, hw_info->sw_minor_rev); |
3545 | |
3546 | - for (i = 0; i < serial->num_ports; i++) { |
3547 | - port = serial->port[i]; |
3548 | - |
3549 | - info = kmalloc(sizeof(struct whiteheat_private), GFP_KERNEL); |
3550 | - if (info == NULL) { |
3551 | - dev_err(&port->dev, |
3552 | - "%s: Out of memory for port structures\n", |
3553 | - serial->type->description); |
3554 | - goto no_private; |
3555 | - } |
3556 | - |
3557 | - info->mcr = 0; |
3558 | - |
3559 | - usb_set_serial_port_data(port, info); |
3560 | - } |
3561 | - |
3562 | command_info = kmalloc(sizeof(struct whiteheat_command_private), |
3563 | GFP_KERNEL); |
3564 | if (command_info == NULL) { |
3565 | @@ -405,16 +390,10 @@ no_firmware: |
3566 | "%s: please contact support@connecttech.com\n", |
3567 | serial->type->description); |
3568 | kfree(result); |
3569 | + kfree(command); |
3570 | return -ENODEV; |
3571 | |
3572 | no_command_private: |
3573 | - for (i = serial->num_ports - 1; i >= 0; i--) { |
3574 | - port = serial->port[i]; |
3575 | - info = usb_get_serial_port_data(port); |
3576 | - kfree(info); |
3577 | -no_private: |
3578 | - ; |
3579 | - } |
3580 | kfree(result); |
3581 | no_result_buffer: |
3582 | kfree(command); |
3583 | @@ -422,21 +401,36 @@ no_command_buffer: |
3584 | return -ENOMEM; |
3585 | } |
3586 | |
3587 | - |
3588 | static void whiteheat_release(struct usb_serial *serial) |
3589 | { |
3590 | struct usb_serial_port *command_port; |
3591 | - struct whiteheat_private *info; |
3592 | - int i; |
3593 | |
3594 | /* free up our private data for our command port */ |
3595 | command_port = serial->port[COMMAND_PORT]; |
3596 | kfree(usb_get_serial_port_data(command_port)); |
3597 | +} |
3598 | |
3599 | - for (i = 0; i < serial->num_ports; i++) { |
3600 | - info = usb_get_serial_port_data(serial->port[i]); |
3601 | - kfree(info); |
3602 | - } |
3603 | +static int whiteheat_port_probe(struct usb_serial_port *port) |
3604 | +{ |
3605 | + struct whiteheat_private *info; |
3606 | + |
3607 | + info = kzalloc(sizeof(*info), GFP_KERNEL); |
3608 | + if (!info) |
3609 | + return -ENOMEM; |
3610 | + |
3611 | + usb_set_serial_port_data(port, info); |
3612 | + |
3613 | + return 0; |
3614 | +} |
3615 | + |
3616 | +static int whiteheat_port_remove(struct usb_serial_port *port) |
3617 | +{ |
3618 | + struct whiteheat_private *info; |
3619 | + |
3620 | + info = usb_get_serial_port_data(port); |
3621 | + kfree(info); |
3622 | + |
3623 | + return 0; |
3624 | } |
3625 | |
3626 | static int whiteheat_open(struct tty_struct *tty, struct usb_serial_port *port) |
3627 | diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h |
3628 | index 62a31be..8f98c9a 100644 |
3629 | --- a/drivers/usb/storage/unusual_devs.h |
3630 | +++ b/drivers/usb/storage/unusual_devs.h |
3631 | @@ -1004,6 +1004,12 @@ UNUSUAL_DEV( 0x07cf, 0x1001, 0x1000, 0x9999, |
3632 | USB_SC_8070, USB_PR_CB, NULL, |
3633 | US_FL_NEED_OVERRIDE | US_FL_FIX_INQUIRY ), |
3634 | |
3635 | +/* Submitted by Oleksandr Chumachenko <ledest@gmail.com> */ |
3636 | +UNUSUAL_DEV( 0x07cf, 0x1167, 0x0100, 0x0100, |
3637 | + "Casio", |
3638 | + "EX-N1 DigitalCamera", |
3639 | + USB_SC_8070, USB_PR_DEVICE, NULL, 0), |
3640 | + |
3641 | /* Submitted by Hartmut Wahl <hwahl@hwahl.de>*/ |
3642 | UNUSUAL_DEV( 0x0839, 0x000a, 0x0001, 0x0001, |
3643 | "Samsung", |
3644 | diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c |
3645 | index 072cbba..7f93f34 100644 |
3646 | --- a/drivers/vhost/net.c |
3647 | +++ b/drivers/vhost/net.c |
3648 | @@ -379,7 +379,8 @@ static void handle_rx(struct vhost_net *net) |
3649 | .hdr.gso_type = VIRTIO_NET_HDR_GSO_NONE |
3650 | }; |
3651 | size_t total_len = 0; |
3652 | - int err, headcount, mergeable; |
3653 | + int err, mergeable; |
3654 | + s16 headcount; |
3655 | size_t vhost_hlen, sock_hlen; |
3656 | size_t vhost_len, sock_len; |
3657 | /* TODO: check that we are running from vhost_worker? */ |
3658 | diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c |
3659 | index debdfe0..5d2069f 100644 |
3660 | --- a/fs/compat_ioctl.c |
3661 | +++ b/fs/compat_ioctl.c |
3662 | @@ -210,6 +210,8 @@ static int do_video_set_spu_palette(unsigned int fd, unsigned int cmd, |
3663 | |
3664 | err = get_user(palp, &up->palette); |
3665 | err |= get_user(length, &up->length); |
3666 | + if (err) |
3667 | + return -EFAULT; |
3668 | |
3669 | up_native = compat_alloc_user_space(sizeof(struct video_spu_palette)); |
3670 | err = put_user(compat_ptr(palp), &up_native->palette); |
3671 | diff --git a/fs/exec.c b/fs/exec.c |
3672 | index 574cf4d..fab2c6d 100644 |
3673 | --- a/fs/exec.c |
3674 | +++ b/fs/exec.c |
3675 | @@ -1110,7 +1110,8 @@ int flush_old_exec(struct linux_binprm * bprm) |
3676 | bprm->mm = NULL; /* We're using it now */ |
3677 | |
3678 | set_fs(USER_DS); |
3679 | - current->flags &= ~(PF_RANDOMIZE | PF_FORKNOEXEC | PF_KTHREAD); |
3680 | + current->flags &= |
3681 | + ~(PF_RANDOMIZE | PF_FORKNOEXEC | PF_KTHREAD | PF_NOFREEZE); |
3682 | flush_thread(); |
3683 | current->personality &= ~bprm->per_clear; |
3684 | |
3685 | diff --git a/fs/lockd/mon.c b/fs/lockd/mon.c |
3686 | index e4fb3ba..3d7e09b 100644 |
3687 | --- a/fs/lockd/mon.c |
3688 | +++ b/fs/lockd/mon.c |
3689 | @@ -85,29 +85,38 @@ static struct rpc_clnt *nsm_create(struct net *net) |
3690 | return rpc_create(&args); |
3691 | } |
3692 | |
3693 | +static struct rpc_clnt *nsm_client_set(struct lockd_net *ln, |
3694 | + struct rpc_clnt *clnt) |
3695 | +{ |
3696 | + spin_lock(&ln->nsm_clnt_lock); |
3697 | + if (ln->nsm_users == 0) { |
3698 | + if (clnt == NULL) |
3699 | + goto out; |
3700 | + ln->nsm_clnt = clnt; |
3701 | + } |
3702 | + clnt = ln->nsm_clnt; |
3703 | + ln->nsm_users++; |
3704 | +out: |
3705 | + spin_unlock(&ln->nsm_clnt_lock); |
3706 | + return clnt; |
3707 | +} |
3708 | + |
3709 | static struct rpc_clnt *nsm_client_get(struct net *net) |
3710 | { |
3711 | - static DEFINE_MUTEX(nsm_create_mutex); |
3712 | - struct rpc_clnt *clnt; |
3713 | + struct rpc_clnt *clnt, *new; |
3714 | struct lockd_net *ln = net_generic(net, lockd_net_id); |
3715 | |
3716 | - spin_lock(&ln->nsm_clnt_lock); |
3717 | - if (ln->nsm_users) { |
3718 | - ln->nsm_users++; |
3719 | - clnt = ln->nsm_clnt; |
3720 | - spin_unlock(&ln->nsm_clnt_lock); |
3721 | + clnt = nsm_client_set(ln, NULL); |
3722 | + if (clnt != NULL) |
3723 | goto out; |
3724 | - } |
3725 | - spin_unlock(&ln->nsm_clnt_lock); |
3726 | |
3727 | - mutex_lock(&nsm_create_mutex); |
3728 | - clnt = nsm_create(net); |
3729 | - if (!IS_ERR(clnt)) { |
3730 | - ln->nsm_clnt = clnt; |
3731 | - smp_wmb(); |
3732 | - ln->nsm_users = 1; |
3733 | - } |
3734 | - mutex_unlock(&nsm_create_mutex); |
3735 | + clnt = new = nsm_create(net); |
3736 | + if (IS_ERR(clnt)) |
3737 | + goto out; |
3738 | + |
3739 | + clnt = nsm_client_set(ln, new); |
3740 | + if (clnt != new) |
3741 | + rpc_shutdown_client(new); |
3742 | out: |
3743 | return clnt; |
3744 | } |
3745 | @@ -115,18 +124,16 @@ out: |
3746 | static void nsm_client_put(struct net *net) |
3747 | { |
3748 | struct lockd_net *ln = net_generic(net, lockd_net_id); |
3749 | - struct rpc_clnt *clnt = ln->nsm_clnt; |
3750 | - int shutdown = 0; |
3751 | + struct rpc_clnt *clnt = NULL; |
3752 | |
3753 | spin_lock(&ln->nsm_clnt_lock); |
3754 | - if (ln->nsm_users) { |
3755 | - if (--ln->nsm_users) |
3756 | - ln->nsm_clnt = NULL; |
3757 | - shutdown = !ln->nsm_users; |
3758 | + ln->nsm_users--; |
3759 | + if (ln->nsm_users == 0) { |
3760 | + clnt = ln->nsm_clnt; |
3761 | + ln->nsm_clnt = NULL; |
3762 | } |
3763 | spin_unlock(&ln->nsm_clnt_lock); |
3764 | - |
3765 | - if (shutdown) |
3766 | + if (clnt != NULL) |
3767 | rpc_shutdown_client(clnt); |
3768 | } |
3769 | |
3770 | diff --git a/fs/namei.c b/fs/namei.c |
3771 | index 81bd546..091c4b7 100644 |
3772 | --- a/fs/namei.c |
3773 | +++ b/fs/namei.c |
3774 | @@ -651,8 +651,8 @@ static inline void put_link(struct nameidata *nd, struct path *link, void *cooki |
3775 | path_put(link); |
3776 | } |
3777 | |
3778 | -int sysctl_protected_symlinks __read_mostly = 1; |
3779 | -int sysctl_protected_hardlinks __read_mostly = 1; |
3780 | +int sysctl_protected_symlinks __read_mostly = 0; |
3781 | +int sysctl_protected_hardlinks __read_mostly = 0; |
3782 | |
3783 | /** |
3784 | * may_follow_link - Check symlink following for unsafe situations |
3785 | diff --git a/fs/nfs/blocklayout/blocklayout.c b/fs/nfs/blocklayout/blocklayout.c |
3786 | index f3d16ad..1093968 100644 |
3787 | --- a/fs/nfs/blocklayout/blocklayout.c |
3788 | +++ b/fs/nfs/blocklayout/blocklayout.c |
3789 | @@ -242,14 +242,6 @@ bl_end_par_io_read(void *data, int unused) |
3790 | schedule_work(&rdata->task.u.tk_work); |
3791 | } |
3792 | |
3793 | -static bool |
3794 | -bl_check_alignment(u64 offset, u32 len, unsigned long blkmask) |
3795 | -{ |
3796 | - if ((offset & blkmask) || (len & blkmask)) |
3797 | - return false; |
3798 | - return true; |
3799 | -} |
3800 | - |
3801 | static enum pnfs_try_status |
3802 | bl_read_pagelist(struct nfs_read_data *rdata) |
3803 | { |
3804 | @@ -260,15 +252,15 @@ bl_read_pagelist(struct nfs_read_data *rdata) |
3805 | sector_t isect, extent_length = 0; |
3806 | struct parallel_io *par; |
3807 | loff_t f_offset = rdata->args.offset; |
3808 | + size_t bytes_left = rdata->args.count; |
3809 | + unsigned int pg_offset, pg_len; |
3810 | struct page **pages = rdata->args.pages; |
3811 | int pg_index = rdata->args.pgbase >> PAGE_CACHE_SHIFT; |
3812 | + const bool is_dio = (header->dreq != NULL); |
3813 | |
3814 | dprintk("%s enter nr_pages %u offset %lld count %u\n", __func__, |
3815 | rdata->pages.npages, f_offset, (unsigned int)rdata->args.count); |
3816 | |
3817 | - if (!bl_check_alignment(f_offset, rdata->args.count, PAGE_CACHE_MASK)) |
3818 | - goto use_mds; |
3819 | - |
3820 | par = alloc_parallel(rdata); |
3821 | if (!par) |
3822 | goto use_mds; |
3823 | @@ -298,36 +290,53 @@ bl_read_pagelist(struct nfs_read_data *rdata) |
3824 | extent_length = min(extent_length, cow_length); |
3825 | } |
3826 | } |
3827 | + |
3828 | + if (is_dio) { |
3829 | + pg_offset = f_offset & ~PAGE_CACHE_MASK; |
3830 | + if (pg_offset + bytes_left > PAGE_CACHE_SIZE) |
3831 | + pg_len = PAGE_CACHE_SIZE - pg_offset; |
3832 | + else |
3833 | + pg_len = bytes_left; |
3834 | + |
3835 | + f_offset += pg_len; |
3836 | + bytes_left -= pg_len; |
3837 | + isect += (pg_offset >> SECTOR_SHIFT); |
3838 | + } else { |
3839 | + pg_offset = 0; |
3840 | + pg_len = PAGE_CACHE_SIZE; |
3841 | + } |
3842 | + |
3843 | hole = is_hole(be, isect); |
3844 | if (hole && !cow_read) { |
3845 | bio = bl_submit_bio(READ, bio); |
3846 | /* Fill hole w/ zeroes w/o accessing device */ |
3847 | dprintk("%s Zeroing page for hole\n", __func__); |
3848 | - zero_user_segment(pages[i], 0, PAGE_CACHE_SIZE); |
3849 | + zero_user_segment(pages[i], pg_offset, pg_len); |
3850 | print_page(pages[i]); |
3851 | SetPageUptodate(pages[i]); |
3852 | } else { |
3853 | struct pnfs_block_extent *be_read; |
3854 | |
3855 | be_read = (hole && cow_read) ? cow_read : be; |
3856 | - bio = bl_add_page_to_bio(bio, rdata->pages.npages - i, |
3857 | + bio = do_add_page_to_bio(bio, rdata->pages.npages - i, |
3858 | READ, |
3859 | isect, pages[i], be_read, |
3860 | - bl_end_io_read, par); |
3861 | + bl_end_io_read, par, |
3862 | + pg_offset, pg_len); |
3863 | if (IS_ERR(bio)) { |
3864 | header->pnfs_error = PTR_ERR(bio); |
3865 | bio = NULL; |
3866 | goto out; |
3867 | } |
3868 | } |
3869 | - isect += PAGE_CACHE_SECTORS; |
3870 | + isect += (pg_len >> SECTOR_SHIFT); |
3871 | extent_length -= PAGE_CACHE_SECTORS; |
3872 | } |
3873 | if ((isect << SECTOR_SHIFT) >= header->inode->i_size) { |
3874 | rdata->res.eof = 1; |
3875 | - rdata->res.count = header->inode->i_size - f_offset; |
3876 | + rdata->res.count = header->inode->i_size - rdata->args.offset; |
3877 | } else { |
3878 | - rdata->res.count = (isect << SECTOR_SHIFT) - f_offset; |
3879 | + rdata->res.count = (isect << SECTOR_SHIFT) - rdata->args.offset; |
3880 | } |
3881 | out: |
3882 | bl_put_extent(be); |
3883 | @@ -688,10 +697,13 @@ bl_write_pagelist(struct nfs_write_data *wdata, int sync) |
3884 | NFS_SERVER(header->inode)->pnfs_blksize >> PAGE_CACHE_SHIFT; |
3885 | |
3886 | dprintk("%s enter, %Zu@%lld\n", __func__, count, offset); |
3887 | - /* Check for alignment first */ |
3888 | - if (!bl_check_alignment(offset, count, PAGE_CACHE_MASK)) |
3889 | - goto out_mds; |
3890 | |
3891 | + if (header->dreq != NULL && |
3892 | + (!IS_ALIGNED(offset, NFS_SERVER(header->inode)->pnfs_blksize) || |
3893 | + !IS_ALIGNED(count, NFS_SERVER(header->inode)->pnfs_blksize))) { |
3894 | + dprintk("pnfsblock nonblock aligned DIO writes. Resend MDS\n"); |
3895 | + goto out_mds; |
3896 | + } |
3897 | /* At this point, wdata->pages is a (sequential) list of nfs_pages. |
3898 | * We want to write each, and if there is an error set pnfs_error |
3899 | * to have it redone using nfs. |
3900 | @@ -1164,33 +1176,64 @@ bl_clear_layoutdriver(struct nfs_server *server) |
3901 | return 0; |
3902 | } |
3903 | |
3904 | +static bool |
3905 | +is_aligned_req(struct nfs_page *req, unsigned int alignment) |
3906 | +{ |
3907 | + return IS_ALIGNED(req->wb_offset, alignment) && |
3908 | + IS_ALIGNED(req->wb_bytes, alignment); |
3909 | +} |
3910 | + |
3911 | static void |
3912 | bl_pg_init_read(struct nfs_pageio_descriptor *pgio, struct nfs_page *req) |
3913 | { |
3914 | - if (!bl_check_alignment(req->wb_offset, req->wb_bytes, PAGE_CACHE_MASK)) |
3915 | + if (pgio->pg_dreq != NULL && |
3916 | + !is_aligned_req(req, SECTOR_SIZE)) |
3917 | nfs_pageio_reset_read_mds(pgio); |
3918 | else |
3919 | pnfs_generic_pg_init_read(pgio, req); |
3920 | } |
3921 | |
3922 | -static void |
3923 | +static bool |
3924 | +bl_pg_test_read(struct nfs_pageio_descriptor *pgio, struct nfs_page *prev, |
3925 | + struct nfs_page *req) |
3926 | +{ |
3927 | + if (pgio->pg_dreq != NULL && |
3928 | + !is_aligned_req(req, SECTOR_SIZE)) |
3929 | + return false; |
3930 | + |
3931 | + return pnfs_generic_pg_test(pgio, prev, req); |
3932 | +} |
3933 | + |
3934 | +void |
3935 | bl_pg_init_write(struct nfs_pageio_descriptor *pgio, struct nfs_page *req) |
3936 | { |
3937 | - if (!bl_check_alignment(req->wb_offset, req->wb_bytes, PAGE_CACHE_MASK)) |
3938 | + if (pgio->pg_dreq != NULL && |
3939 | + !is_aligned_req(req, PAGE_CACHE_SIZE)) |
3940 | nfs_pageio_reset_write_mds(pgio); |
3941 | else |
3942 | pnfs_generic_pg_init_write(pgio, req); |
3943 | } |
3944 | |
3945 | +static bool |
3946 | +bl_pg_test_write(struct nfs_pageio_descriptor *pgio, struct nfs_page *prev, |
3947 | + struct nfs_page *req) |
3948 | +{ |
3949 | + if (pgio->pg_dreq != NULL && |
3950 | + !is_aligned_req(req, PAGE_CACHE_SIZE)) |
3951 | + return false; |
3952 | + |
3953 | + return pnfs_generic_pg_test(pgio, prev, req); |
3954 | +} |
3955 | + |
3956 | static const struct nfs_pageio_ops bl_pg_read_ops = { |
3957 | .pg_init = bl_pg_init_read, |
3958 | - .pg_test = pnfs_generic_pg_test, |
3959 | + .pg_test = bl_pg_test_read, |
3960 | .pg_doio = pnfs_generic_pg_readpages, |
3961 | }; |
3962 | |
3963 | static const struct nfs_pageio_ops bl_pg_write_ops = { |
3964 | .pg_init = bl_pg_init_write, |
3965 | - .pg_test = pnfs_generic_pg_test, |
3966 | + .pg_test = bl_pg_test_write, |
3967 | .pg_doio = pnfs_generic_pg_writepages, |
3968 | }; |
3969 | |
3970 | diff --git a/fs/sysfs/dir.c b/fs/sysfs/dir.c |
3971 | index 6b0bb00..2fbdff6 100644 |
3972 | --- a/fs/sysfs/dir.c |
3973 | +++ b/fs/sysfs/dir.c |
3974 | @@ -485,20 +485,18 @@ int __sysfs_add_one(struct sysfs_addrm_cxt *acxt, struct sysfs_dirent *sd) |
3975 | /** |
3976 | * sysfs_pathname - return full path to sysfs dirent |
3977 | * @sd: sysfs_dirent whose path we want |
3978 | - * @path: caller allocated buffer |
3979 | + * @path: caller allocated buffer of size PATH_MAX |
3980 | * |
3981 | * Gives the name "/" to the sysfs_root entry; any path returned |
3982 | * is relative to wherever sysfs is mounted. |
3983 | - * |
3984 | - * XXX: does no error checking on @path size |
3985 | */ |
3986 | static char *sysfs_pathname(struct sysfs_dirent *sd, char *path) |
3987 | { |
3988 | if (sd->s_parent) { |
3989 | sysfs_pathname(sd->s_parent, path); |
3990 | - strcat(path, "/"); |
3991 | + strlcat(path, "/", PATH_MAX); |
3992 | } |
3993 | - strcat(path, sd->s_name); |
3994 | + strlcat(path, sd->s_name, PATH_MAX); |
3995 | return path; |
3996 | } |
3997 | |
3998 | @@ -531,9 +529,11 @@ int sysfs_add_one(struct sysfs_addrm_cxt *acxt, struct sysfs_dirent *sd) |
3999 | char *path = kzalloc(PATH_MAX, GFP_KERNEL); |
4000 | WARN(1, KERN_WARNING |
4001 | "sysfs: cannot create duplicate filename '%s'\n", |
4002 | - (path == NULL) ? sd->s_name : |
4003 | - strcat(strcat(sysfs_pathname(acxt->parent_sd, path), "/"), |
4004 | - sd->s_name)); |
4005 | + (path == NULL) ? sd->s_name |
4006 | + : (sysfs_pathname(acxt->parent_sd, path), |
4007 | + strlcat(path, "/", PATH_MAX), |
4008 | + strlcat(path, sd->s_name, PATH_MAX), |
4009 | + path)); |
4010 | kfree(path); |
4011 | } |
4012 | |
4013 | diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h |
4014 | index c78bb99..af1cbaf 100644 |
4015 | --- a/include/drm/drm_pciids.h |
4016 | +++ b/include/drm/drm_pciids.h |
4017 | @@ -205,6 +205,8 @@ |
4018 | {0x1002, 0x6788, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \ |
4019 | {0x1002, 0x678A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \ |
4020 | {0x1002, 0x6790, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \ |
4021 | + {0x1002, 0x6791, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \ |
4022 | + {0x1002, 0x6792, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \ |
4023 | {0x1002, 0x6798, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \ |
4024 | {0x1002, 0x6799, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \ |
4025 | {0x1002, 0x679A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \ |
4026 | @@ -217,6 +219,7 @@ |
4027 | {0x1002, 0x6808, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \ |
4028 | {0x1002, 0x6809, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \ |
4029 | {0x1002, 0x6810, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \ |
4030 | + {0x1002, 0x6811, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \ |
4031 | {0x1002, 0x6816, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \ |
4032 | {0x1002, 0x6817, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \ |
4033 | {0x1002, 0x6818, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \ |
4034 | diff --git a/include/linux/efi.h b/include/linux/efi.h |
4035 | index ec45ccd..5782114 100644 |
4036 | --- a/include/linux/efi.h |
4037 | +++ b/include/linux/efi.h |
4038 | @@ -496,6 +496,11 @@ extern void efi_map_pal_code (void); |
4039 | extern void efi_memmap_walk (efi_freemem_callback_t callback, void *arg); |
4040 | extern void efi_gettimeofday (struct timespec *ts); |
4041 | extern void efi_enter_virtual_mode (void); /* switch EFI to virtual mode, if possible */ |
4042 | +#ifdef CONFIG_X86 |
4043 | +extern void efi_free_boot_services(void); |
4044 | +#else |
4045 | +static inline void efi_free_boot_services(void) {} |
4046 | +#endif |
4047 | extern u64 efi_get_iobase (void); |
4048 | extern u32 efi_mem_type (unsigned long phys_addr); |
4049 | extern u64 efi_mem_attributes (unsigned long phys_addr); |
4050 | diff --git a/include/linux/memblock.h b/include/linux/memblock.h |
4051 | index 19dc455..c948c44 100644 |
4052 | --- a/include/linux/memblock.h |
4053 | +++ b/include/linux/memblock.h |
4054 | @@ -57,6 +57,7 @@ int memblock_add(phys_addr_t base, phys_addr_t size); |
4055 | int memblock_remove(phys_addr_t base, phys_addr_t size); |
4056 | int memblock_free(phys_addr_t base, phys_addr_t size); |
4057 | int memblock_reserve(phys_addr_t base, phys_addr_t size); |
4058 | +void memblock_trim_memory(phys_addr_t align); |
4059 | |
4060 | #ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP |
4061 | void __next_mem_pfn_range(int *idx, int nid, unsigned long *out_start_pfn, |
4062 | diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h |
4063 | index 3d254e1..f10553c 100644 |
4064 | --- a/include/net/cfg80211.h |
4065 | +++ b/include/net/cfg80211.h |
4066 | @@ -1217,6 +1217,7 @@ struct cfg80211_deauth_request { |
4067 | const u8 *ie; |
4068 | size_t ie_len; |
4069 | u16 reason_code; |
4070 | + bool local_state_change; |
4071 | }; |
4072 | |
4073 | /** |
4074 | diff --git a/init/main.c b/init/main.c |
4075 | index b286730..d61ec54 100644 |
4076 | --- a/init/main.c |
4077 | +++ b/init/main.c |
4078 | @@ -631,6 +631,9 @@ asmlinkage void __init start_kernel(void) |
4079 | acpi_early_init(); /* before LAPIC and SMP init */ |
4080 | sfi_init_late(); |
4081 | |
4082 | + if (efi_enabled) |
4083 | + efi_free_boot_services(); |
4084 | + |
4085 | ftrace_init(); |
4086 | |
4087 | /* Do the rest non-__init'ed, we're now alive */ |
4088 | diff --git a/lib/genalloc.c b/lib/genalloc.c |
4089 | index 6bc04aa..7cb7a5d 100644 |
4090 | --- a/lib/genalloc.c |
4091 | +++ b/lib/genalloc.c |
4092 | @@ -176,7 +176,7 @@ int gen_pool_add_virt(struct gen_pool *pool, unsigned long virt, phys_addr_t phy |
4093 | struct gen_pool_chunk *chunk; |
4094 | int nbits = size >> pool->min_alloc_order; |
4095 | int nbytes = sizeof(struct gen_pool_chunk) + |
4096 | - (nbits + BITS_PER_BYTE - 1) / BITS_PER_BYTE; |
4097 | + BITS_TO_LONGS(nbits) * sizeof(long); |
4098 | |
4099 | chunk = kmalloc_node(nbytes, GFP_KERNEL | __GFP_ZERO, nid); |
4100 | if (unlikely(chunk == NULL)) |
4101 | diff --git a/mm/memblock.c b/mm/memblock.c |
4102 | index 82aa349..0e490e8 100644 |
4103 | --- a/mm/memblock.c |
4104 | +++ b/mm/memblock.c |
4105 | @@ -929,6 +929,30 @@ int __init_memblock memblock_is_region_reserved(phys_addr_t base, phys_addr_t si |
4106 | return memblock_overlaps_region(&memblock.reserved, base, size) >= 0; |
4107 | } |
4108 | |
4109 | +void __init_memblock memblock_trim_memory(phys_addr_t align) |
4110 | +{ |
4111 | + int i; |
4112 | + phys_addr_t start, end, orig_start, orig_end; |
4113 | + struct memblock_type *mem = &memblock.memory; |
4114 | + |
4115 | + for (i = 0; i < mem->cnt; i++) { |
4116 | + orig_start = mem->regions[i].base; |
4117 | + orig_end = mem->regions[i].base + mem->regions[i].size; |
4118 | + start = round_up(orig_start, align); |
4119 | + end = round_down(orig_end, align); |
4120 | + |
4121 | + if (start == orig_start && end == orig_end) |
4122 | + continue; |
4123 | + |
4124 | + if (start < end) { |
4125 | + mem->regions[i].base = start; |
4126 | + mem->regions[i].size = end - start; |
4127 | + } else { |
4128 | + memblock_remove_region(mem, i); |
4129 | + i--; |
4130 | + } |
4131 | + } |
4132 | +} |
4133 | |
4134 | void __init_memblock memblock_set_current_limit(phys_addr_t limit) |
4135 | { |
4136 | diff --git a/mm/rmap.c b/mm/rmap.c |
4137 | index 0f3b7cd..aa95e59 100644 |
4138 | --- a/mm/rmap.c |
4139 | +++ b/mm/rmap.c |
4140 | @@ -56,6 +56,7 @@ |
4141 | #include <linux/mmu_notifier.h> |
4142 | #include <linux/migrate.h> |
4143 | #include <linux/hugetlb.h> |
4144 | +#include <linux/backing-dev.h> |
4145 | |
4146 | #include <asm/tlbflush.h> |
4147 | |
4148 | @@ -971,11 +972,8 @@ int page_mkclean(struct page *page) |
4149 | |
4150 | if (page_mapped(page)) { |
4151 | struct address_space *mapping = page_mapping(page); |
4152 | - if (mapping) { |
4153 | + if (mapping) |
4154 | ret = page_mkclean_file(mapping, page); |
4155 | - if (page_test_and_clear_dirty(page_to_pfn(page), 1)) |
4156 | - ret = 1; |
4157 | - } |
4158 | } |
4159 | |
4160 | return ret; |
4161 | @@ -1161,6 +1159,7 @@ void page_add_file_rmap(struct page *page) |
4162 | */ |
4163 | void page_remove_rmap(struct page *page) |
4164 | { |
4165 | + struct address_space *mapping = page_mapping(page); |
4166 | bool anon = PageAnon(page); |
4167 | bool locked; |
4168 | unsigned long flags; |
4169 | @@ -1183,8 +1182,19 @@ void page_remove_rmap(struct page *page) |
4170 | * this if the page is anon, so about to be freed; but perhaps |
4171 | * not if it's in swapcache - there might be another pte slot |
4172 | * containing the swap entry, but page not yet written to swap. |
4173 | + * |
4174 | + * And we can skip it on file pages, so long as the filesystem |
4175 | + * participates in dirty tracking; but need to catch shm and tmpfs |
4176 | + * and ramfs pages which have been modified since creation by read |
4177 | + * fault. |
4178 | + * |
4179 | + * Note that mapping must be decided above, before decrementing |
4180 | + * mapcount (which luckily provides a barrier): once page is unmapped, |
4181 | + * it could be truncated and page->mapping reset to NULL at any moment. |
4182 | + * Note also that we are relying on page_mapping(page) to set mapping |
4183 | + * to &swapper_space when PageSwapCache(page). |
4184 | */ |
4185 | - if ((!anon || PageSwapCache(page)) && |
4186 | + if (mapping && !mapping_cap_account_dirty(mapping) && |
4187 | page_test_and_clear_dirty(page_to_pfn(page), 1)) |
4188 | set_page_dirty(page); |
4189 | /* |
4190 | diff --git a/net/bluetooth/smp.c b/net/bluetooth/smp.c |
4191 | index 8c225ef..2ac8d50 100644 |
4192 | --- a/net/bluetooth/smp.c |
4193 | +++ b/net/bluetooth/smp.c |
4194 | @@ -32,6 +32,8 @@ |
4195 | |
4196 | #define SMP_TIMEOUT msecs_to_jiffies(30000) |
4197 | |
4198 | +#define AUTH_REQ_MASK 0x07 |
4199 | + |
4200 | static inline void swap128(u8 src[16], u8 dst[16]) |
4201 | { |
4202 | int i; |
4203 | @@ -230,7 +232,7 @@ static void build_pairing_cmd(struct l2cap_conn *conn, |
4204 | req->max_key_size = SMP_MAX_ENC_KEY_SIZE; |
4205 | req->init_key_dist = 0; |
4206 | req->resp_key_dist = dist_keys; |
4207 | - req->auth_req = authreq; |
4208 | + req->auth_req = (authreq & AUTH_REQ_MASK); |
4209 | return; |
4210 | } |
4211 | |
4212 | @@ -239,7 +241,7 @@ static void build_pairing_cmd(struct l2cap_conn *conn, |
4213 | rsp->max_key_size = SMP_MAX_ENC_KEY_SIZE; |
4214 | rsp->init_key_dist = 0; |
4215 | rsp->resp_key_dist = req->resp_key_dist & dist_keys; |
4216 | - rsp->auth_req = authreq; |
4217 | + rsp->auth_req = (authreq & AUTH_REQ_MASK); |
4218 | } |
4219 | |
4220 | static u8 check_enc_key_size(struct l2cap_conn *conn, __u8 max_key_size) |
4221 | diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c |
4222 | index bfb57dc..c93d395 100644 |
4223 | --- a/net/mac80211/iface.c |
4224 | +++ b/net/mac80211/iface.c |
4225 | @@ -822,7 +822,7 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, |
4226 | struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); |
4227 | if (info->control.vif == &sdata->vif) { |
4228 | __skb_unlink(skb, &local->pending[i]); |
4229 | - dev_kfree_skb_irq(skb); |
4230 | + ieee80211_free_txskb(&local->hw, skb); |
4231 | } |
4232 | } |
4233 | } |
4234 | diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c |
4235 | index f76b833..b71d466 100644 |
4236 | --- a/net/mac80211/mlme.c |
4237 | +++ b/net/mac80211/mlme.c |
4238 | @@ -3065,22 +3065,32 @@ static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata, |
4239 | ht_cfreq, ht_oper->primary_chan, |
4240 | cbss->channel->band); |
4241 | ht_oper = NULL; |
4242 | + } else { |
4243 | + channel_type = NL80211_CHAN_HT20; |
4244 | } |
4245 | } |
4246 | |
4247 | - if (ht_oper) { |
4248 | - channel_type = NL80211_CHAN_HT20; |
4249 | + if (ht_oper && sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) { |
4250 | + /* |
4251 | + * cfg80211 already verified that the channel itself can |
4252 | + * be used, but it didn't check that we can do the right |
4253 | + * HT type, so do that here as well. If HT40 isn't allowed |
4254 | + * on this channel, disable 40 MHz operation. |
4255 | + */ |
4256 | |
4257 | - if (sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) { |
4258 | - switch (ht_oper->ht_param & |
4259 | - IEEE80211_HT_PARAM_CHA_SEC_OFFSET) { |
4260 | - case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: |
4261 | + switch (ht_oper->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) { |
4262 | + case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: |
4263 | + if (cbss->channel->flags & IEEE80211_CHAN_NO_HT40PLUS) |
4264 | + ifmgd->flags |= IEEE80211_STA_DISABLE_40MHZ; |
4265 | + else |
4266 | channel_type = NL80211_CHAN_HT40PLUS; |
4267 | - break; |
4268 | - case IEEE80211_HT_PARAM_CHA_SEC_BELOW: |
4269 | + break; |
4270 | + case IEEE80211_HT_PARAM_CHA_SEC_BELOW: |
4271 | + if (cbss->channel->flags & IEEE80211_CHAN_NO_HT40MINUS) |
4272 | + ifmgd->flags |= IEEE80211_STA_DISABLE_40MHZ; |
4273 | + else |
4274 | channel_type = NL80211_CHAN_HT40MINUS; |
4275 | - break; |
4276 | - } |
4277 | + break; |
4278 | } |
4279 | } |
4280 | |
4281 | @@ -3457,6 +3467,7 @@ int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata, |
4282 | { |
4283 | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
4284 | u8 frame_buf[DEAUTH_DISASSOC_LEN]; |
4285 | + bool tx = !req->local_state_change; |
4286 | |
4287 | mutex_lock(&ifmgd->mtx); |
4288 | |
4289 | @@ -3473,11 +3484,11 @@ int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata, |
4290 | if (ifmgd->associated && |
4291 | ether_addr_equal(ifmgd->associated->bssid, req->bssid)) |
4292 | ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, |
4293 | - req->reason_code, true, frame_buf); |
4294 | + req->reason_code, tx, frame_buf); |
4295 | else |
4296 | ieee80211_send_deauth_disassoc(sdata, req->bssid, |
4297 | IEEE80211_STYPE_DEAUTH, |
4298 | - req->reason_code, true, |
4299 | + req->reason_code, tx, |
4300 | frame_buf); |
4301 | mutex_unlock(&ifmgd->mtx); |
4302 | |
4303 | diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c |
4304 | index 06fa75c..63882b9 100644 |
4305 | --- a/net/mac80211/sta_info.c |
4306 | +++ b/net/mac80211/sta_info.c |
4307 | @@ -585,7 +585,7 @@ static bool sta_info_cleanup_expire_buffered_ac(struct ieee80211_local *local, |
4308 | */ |
4309 | if (!skb) |
4310 | break; |
4311 | - dev_kfree_skb(skb); |
4312 | + ieee80211_free_txskb(&local->hw, skb); |
4313 | } |
4314 | |
4315 | /* |
4316 | @@ -614,7 +614,7 @@ static bool sta_info_cleanup_expire_buffered_ac(struct ieee80211_local *local, |
4317 | local->total_ps_buffered--; |
4318 | ps_dbg(sta->sdata, "Buffered frame expired (STA %pM)\n", |
4319 | sta->sta.addr); |
4320 | - dev_kfree_skb(skb); |
4321 | + ieee80211_free_txskb(&local->hw, skb); |
4322 | } |
4323 | |
4324 | /* |
4325 | diff --git a/net/mac80211/util.c b/net/mac80211/util.c |
4326 | index 39b82fe..c9b52f7 100644 |
4327 | --- a/net/mac80211/util.c |
4328 | +++ b/net/mac80211/util.c |
4329 | @@ -400,7 +400,7 @@ void ieee80211_add_pending_skb(struct ieee80211_local *local, |
4330 | int queue = info->hw_queue; |
4331 | |
4332 | if (WARN_ON(!info->control.vif)) { |
4333 | - kfree_skb(skb); |
4334 | + ieee80211_free_txskb(&local->hw, skb); |
4335 | return; |
4336 | } |
4337 | |
4338 | @@ -425,7 +425,7 @@ void ieee80211_add_pending_skbs_fn(struct ieee80211_local *local, |
4339 | struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); |
4340 | |
4341 | if (WARN_ON(!info->control.vif)) { |
4342 | - kfree_skb(skb); |
4343 | + ieee80211_free_txskb(&local->hw, skb); |
4344 | continue; |
4345 | } |
4346 | |
4347 | diff --git a/net/mac80211/wpa.c b/net/mac80211/wpa.c |
4348 | index bdb53ab..e72562a 100644 |
4349 | --- a/net/mac80211/wpa.c |
4350 | +++ b/net/mac80211/wpa.c |
4351 | @@ -106,7 +106,8 @@ ieee80211_rx_h_michael_mic_verify(struct ieee80211_rx_data *rx) |
4352 | if (status->flag & RX_FLAG_MMIC_ERROR) |
4353 | goto mic_fail; |
4354 | |
4355 | - if (!(status->flag & RX_FLAG_IV_STRIPPED) && rx->key) |
4356 | + if (!(status->flag & RX_FLAG_IV_STRIPPED) && rx->key && |
4357 | + rx->key->conf.cipher == WLAN_CIPHER_SUITE_TKIP) |
4358 | goto update_iv; |
4359 | |
4360 | return RX_CONTINUE; |
4361 | diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c |
4362 | index 97f8918..6a70db4 100644 |
4363 | --- a/net/sunrpc/xprtsock.c |
4364 | +++ b/net/sunrpc/xprtsock.c |
4365 | @@ -254,7 +254,6 @@ struct sock_xprt { |
4366 | void (*old_data_ready)(struct sock *, int); |
4367 | void (*old_state_change)(struct sock *); |
4368 | void (*old_write_space)(struct sock *); |
4369 | - void (*old_error_report)(struct sock *); |
4370 | }; |
4371 | |
4372 | /* |
4373 | @@ -737,10 +736,10 @@ static int xs_tcp_send_request(struct rpc_task *task) |
4374 | dprintk("RPC: sendmsg returned unrecognized error %d\n", |
4375 | -status); |
4376 | case -ECONNRESET: |
4377 | - case -EPIPE: |
4378 | xs_tcp_shutdown(xprt); |
4379 | case -ECONNREFUSED: |
4380 | case -ENOTCONN: |
4381 | + case -EPIPE: |
4382 | clear_bit(SOCK_ASYNC_NOSPACE, &transport->sock->flags); |
4383 | } |
4384 | |
4385 | @@ -781,7 +780,6 @@ static void xs_save_old_callbacks(struct sock_xprt *transport, struct sock *sk) |
4386 | transport->old_data_ready = sk->sk_data_ready; |
4387 | transport->old_state_change = sk->sk_state_change; |
4388 | transport->old_write_space = sk->sk_write_space; |
4389 | - transport->old_error_report = sk->sk_error_report; |
4390 | } |
4391 | |
4392 | static void xs_restore_old_callbacks(struct sock_xprt *transport, struct sock *sk) |
4393 | @@ -789,7 +787,6 @@ static void xs_restore_old_callbacks(struct sock_xprt *transport, struct sock *s |
4394 | sk->sk_data_ready = transport->old_data_ready; |
4395 | sk->sk_state_change = transport->old_state_change; |
4396 | sk->sk_write_space = transport->old_write_space; |
4397 | - sk->sk_error_report = transport->old_error_report; |
4398 | } |
4399 | |
4400 | static void xs_reset_transport(struct sock_xprt *transport) |
4401 | @@ -1462,7 +1459,7 @@ static void xs_tcp_cancel_linger_timeout(struct rpc_xprt *xprt) |
4402 | xprt_clear_connecting(xprt); |
4403 | } |
4404 | |
4405 | -static void xs_sock_mark_closed(struct rpc_xprt *xprt) |
4406 | +static void xs_sock_reset_connection_flags(struct rpc_xprt *xprt) |
4407 | { |
4408 | smp_mb__before_clear_bit(); |
4409 | clear_bit(XPRT_CONNECTION_ABORT, &xprt->state); |
4410 | @@ -1470,6 +1467,11 @@ static void xs_sock_mark_closed(struct rpc_xprt *xprt) |
4411 | clear_bit(XPRT_CLOSE_WAIT, &xprt->state); |
4412 | clear_bit(XPRT_CLOSING, &xprt->state); |
4413 | smp_mb__after_clear_bit(); |
4414 | +} |
4415 | + |
4416 | +static void xs_sock_mark_closed(struct rpc_xprt *xprt) |
4417 | +{ |
4418 | + xs_sock_reset_connection_flags(xprt); |
4419 | /* Mark transport as closed and wake up all pending tasks */ |
4420 | xprt_disconnect_done(xprt); |
4421 | } |
4422 | @@ -1525,6 +1527,7 @@ static void xs_tcp_state_change(struct sock *sk) |
4423 | case TCP_CLOSE_WAIT: |
4424 | /* The server initiated a shutdown of the socket */ |
4425 | xprt->connect_cookie++; |
4426 | + clear_bit(XPRT_CONNECTED, &xprt->state); |
4427 | xs_tcp_force_close(xprt); |
4428 | case TCP_CLOSING: |
4429 | /* |
4430 | @@ -1549,25 +1552,6 @@ static void xs_tcp_state_change(struct sock *sk) |
4431 | read_unlock_bh(&sk->sk_callback_lock); |
4432 | } |
4433 | |
4434 | -/** |
4435 | - * xs_error_report - callback mainly for catching socket errors |
4436 | - * @sk: socket |
4437 | - */ |
4438 | -static void xs_error_report(struct sock *sk) |
4439 | -{ |
4440 | - struct rpc_xprt *xprt; |
4441 | - |
4442 | - read_lock_bh(&sk->sk_callback_lock); |
4443 | - if (!(xprt = xprt_from_sock(sk))) |
4444 | - goto out; |
4445 | - dprintk("RPC: %s client %p...\n" |
4446 | - "RPC: error %d\n", |
4447 | - __func__, xprt, sk->sk_err); |
4448 | - xprt_wake_pending_tasks(xprt, -EAGAIN); |
4449 | -out: |
4450 | - read_unlock_bh(&sk->sk_callback_lock); |
4451 | -} |
4452 | - |
4453 | static void xs_write_space(struct sock *sk) |
4454 | { |
4455 | struct socket *sock; |
4456 | @@ -1867,7 +1851,6 @@ static int xs_local_finish_connecting(struct rpc_xprt *xprt, |
4457 | sk->sk_user_data = xprt; |
4458 | sk->sk_data_ready = xs_local_data_ready; |
4459 | sk->sk_write_space = xs_udp_write_space; |
4460 | - sk->sk_error_report = xs_error_report; |
4461 | sk->sk_allocation = GFP_ATOMIC; |
4462 | |
4463 | xprt_clear_connected(xprt); |
4464 | @@ -1995,7 +1978,6 @@ static void xs_udp_finish_connecting(struct rpc_xprt *xprt, struct socket *sock) |
4465 | sk->sk_user_data = xprt; |
4466 | sk->sk_data_ready = xs_udp_data_ready; |
4467 | sk->sk_write_space = xs_udp_write_space; |
4468 | - sk->sk_error_report = xs_error_report; |
4469 | sk->sk_no_check = UDP_CSUM_NORCV; |
4470 | sk->sk_allocation = GFP_ATOMIC; |
4471 | |
4472 | @@ -2065,10 +2047,8 @@ static void xs_abort_connection(struct sock_xprt *transport) |
4473 | any.sa_family = AF_UNSPEC; |
4474 | result = kernel_connect(transport->sock, &any, sizeof(any), 0); |
4475 | if (!result) |
4476 | - xs_sock_mark_closed(&transport->xprt); |
4477 | - else |
4478 | - dprintk("RPC: AF_UNSPEC connect return code %d\n", |
4479 | - result); |
4480 | + xs_sock_reset_connection_flags(&transport->xprt); |
4481 | + dprintk("RPC: AF_UNSPEC connect return code %d\n", result); |
4482 | } |
4483 | |
4484 | static void xs_tcp_reuse_connection(struct sock_xprt *transport) |
4485 | @@ -2113,7 +2093,6 @@ static int xs_tcp_finish_connecting(struct rpc_xprt *xprt, struct socket *sock) |
4486 | sk->sk_data_ready = xs_tcp_data_ready; |
4487 | sk->sk_state_change = xs_tcp_state_change; |
4488 | sk->sk_write_space = xs_tcp_write_space; |
4489 | - sk->sk_error_report = xs_error_report; |
4490 | sk->sk_allocation = GFP_ATOMIC; |
4491 | |
4492 | /* socket options */ |
4493 | diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c |
4494 | index 1cdb1d5..9ea174f 100644 |
4495 | --- a/net/wireless/mlme.c |
4496 | +++ b/net/wireless/mlme.c |
4497 | @@ -457,20 +457,14 @@ int __cfg80211_mlme_deauth(struct cfg80211_registered_device *rdev, |
4498 | .reason_code = reason, |
4499 | .ie = ie, |
4500 | .ie_len = ie_len, |
4501 | + .local_state_change = local_state_change, |
4502 | }; |
4503 | |
4504 | ASSERT_WDEV_LOCK(wdev); |
4505 | |
4506 | - if (local_state_change) { |
4507 | - if (wdev->current_bss && |
4508 | - ether_addr_equal(wdev->current_bss->pub.bssid, bssid)) { |
4509 | - cfg80211_unhold_bss(wdev->current_bss); |
4510 | - cfg80211_put_bss(&wdev->current_bss->pub); |
4511 | - wdev->current_bss = NULL; |
4512 | - } |
4513 | - |
4514 | + if (local_state_change && (!wdev->current_bss || |
4515 | + !ether_addr_equal(wdev->current_bss->pub.bssid, bssid))) |
4516 | return 0; |
4517 | - } |
4518 | |
4519 | return rdev->ops->deauth(&rdev->wiphy, dev, &req); |
4520 | } |
4521 | diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c |
4522 | index 155cbd2..70ce60f 100644 |
4523 | --- a/sound/pci/hda/patch_realtek.c |
4524 | +++ b/sound/pci/hda/patch_realtek.c |
4525 | @@ -5704,6 +5704,7 @@ static const struct hda_verb alc268_beep_init_verbs[] = { |
4526 | |
4527 | enum { |
4528 | ALC268_FIXUP_INV_DMIC, |
4529 | + ALC268_FIXUP_HP_EAPD, |
4530 | }; |
4531 | |
4532 | static const struct alc_fixup alc268_fixups[] = { |
4533 | @@ -5711,10 +5712,26 @@ static const struct alc_fixup alc268_fixups[] = { |
4534 | .type = ALC_FIXUP_FUNC, |
4535 | .v.func = alc_fixup_inv_dmic_0x12, |
4536 | }, |
4537 | + [ALC268_FIXUP_HP_EAPD] = { |
4538 | + .type = ALC_FIXUP_VERBS, |
4539 | + .v.verbs = (const struct hda_verb[]) { |
4540 | + {0x15, AC_VERB_SET_EAPD_BTLENABLE, 0}, |
4541 | + {} |
4542 | + } |
4543 | + }, |
4544 | }; |
4545 | |
4546 | static const struct alc_model_fixup alc268_fixup_models[] = { |
4547 | {.id = ALC268_FIXUP_INV_DMIC, .name = "inv-dmic"}, |
4548 | + {.id = ALC268_FIXUP_HP_EAPD, .name = "hp-eapd"}, |
4549 | + {} |
4550 | +}; |
4551 | + |
4552 | +static const struct snd_pci_quirk alc268_fixup_tbl[] = { |
4553 | + /* below is codec SSID since multiple Toshiba laptops have the |
4554 | + * same PCI SSID 1179:ff00 |
4555 | + */ |
4556 | + SND_PCI_QUIRK(0x1179, 0xff06, "Toshiba P200", ALC268_FIXUP_HP_EAPD), |
4557 | {} |
4558 | }; |
4559 | |
4560 | @@ -5749,7 +5766,7 @@ static int patch_alc268(struct hda_codec *codec) |
4561 | |
4562 | spec = codec->spec; |
4563 | |
4564 | - alc_pick_fixup(codec, alc268_fixup_models, NULL, alc268_fixups); |
4565 | + alc_pick_fixup(codec, alc268_fixup_models, alc268_fixup_tbl, alc268_fixups); |
4566 | alc_apply_fixup(codec, ALC_FIXUP_ACT_PRE_PROBE); |
4567 | |
4568 | /* automatic parse from the BIOS config */ |
4569 | @@ -6214,6 +6231,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { |
4570 | SND_PCI_QUIRK(0x17aa, 0x21e9, "Thinkpad Edge 15", ALC269_FIXUP_SKU_IGNORE), |
4571 | SND_PCI_QUIRK(0x17aa, 0x21f6, "Thinkpad T530", ALC269_FIXUP_LENOVO_DOCK), |
4572 | SND_PCI_QUIRK(0x17aa, 0x21fa, "Thinkpad X230", ALC269_FIXUP_LENOVO_DOCK), |
4573 | + SND_PCI_QUIRK(0x17aa, 0x21f3, "Thinkpad T430", ALC269_FIXUP_LENOVO_DOCK), |
4574 | SND_PCI_QUIRK(0x17aa, 0x21fb, "Thinkpad T430s", ALC269_FIXUP_LENOVO_DOCK), |
4575 | SND_PCI_QUIRK(0x17aa, 0x2203, "Thinkpad X230 Tablet", ALC269_FIXUP_LENOVO_DOCK), |
4576 | SND_PCI_QUIRK(0x17aa, 0x3bf8, "Quanta FL1", ALC269_FIXUP_PCM_44K), |
4577 | diff --git a/usr/gen_init_cpio.c b/usr/gen_init_cpio.c |
4578 | index af0f22f..aca6edc 100644 |
4579 | --- a/usr/gen_init_cpio.c |
4580 | +++ b/usr/gen_init_cpio.c |
4581 | @@ -303,7 +303,7 @@ static int cpio_mkfile(const char *name, const char *location, |
4582 | int retval; |
4583 | int rc = -1; |
4584 | int namesize; |
4585 | - int i; |
4586 | + unsigned int i; |
4587 | |
4588 | mode |= S_IFREG; |
4589 | |
4590 | @@ -381,25 +381,28 @@ error: |
4591 | |
4592 | static char *cpio_replace_env(char *new_location) |
4593 | { |
4594 | - char expanded[PATH_MAX + 1]; |
4595 | - char env_var[PATH_MAX + 1]; |
4596 | - char *start; |
4597 | - char *end; |
4598 | - |
4599 | - for (start = NULL; (start = strstr(new_location, "${")); ) { |
4600 | - end = strchr(start, '}'); |
4601 | - if (start < end) { |
4602 | - *env_var = *expanded = '\0'; |
4603 | - strncat(env_var, start + 2, end - start - 2); |
4604 | - strncat(expanded, new_location, start - new_location); |
4605 | - strncat(expanded, getenv(env_var), PATH_MAX); |
4606 | - strncat(expanded, end + 1, PATH_MAX); |
4607 | - strncpy(new_location, expanded, PATH_MAX); |
4608 | - } else |
4609 | - break; |
4610 | - } |
4611 | - |
4612 | - return new_location; |
4613 | + char expanded[PATH_MAX + 1]; |
4614 | + char env_var[PATH_MAX + 1]; |
4615 | + char *start; |
4616 | + char *end; |
4617 | + |
4618 | + for (start = NULL; (start = strstr(new_location, "${")); ) { |
4619 | + end = strchr(start, '}'); |
4620 | + if (start < end) { |
4621 | + *env_var = *expanded = '\0'; |
4622 | + strncat(env_var, start + 2, end - start - 2); |
4623 | + strncat(expanded, new_location, start - new_location); |
4624 | + strncat(expanded, getenv(env_var), |
4625 | + PATH_MAX - strlen(expanded)); |
4626 | + strncat(expanded, end + 1, |
4627 | + PATH_MAX - strlen(expanded)); |
4628 | + strncpy(new_location, expanded, PATH_MAX); |
4629 | + new_location[PATH_MAX] = 0; |
4630 | + } else |
4631 | + break; |
4632 | + } |
4633 | + |
4634 | + return new_location; |
4635 | } |
4636 | |
4637 |