openssl/patches/openssl-0.9.8e-libdir.patch

Submitted By: Jeremy Utley (jeremy at jutley dot org)
Date: 2006-05-18
Initial Package Version: 0.9.8b
Origin: Based on work by Ryan Oliver & Jim Gifford
Upstream Status: Unknown
Description: Allows lib{32,64} by adding LIBDIR= to the make line - new OpenSSL
introduces changes to engines/Makefile that causes the previous patch to fail.
This new patch corrects that.

diff -Naur openssl-0.9.8b/Makefile.org openssl-0.9.8b-new/Makefile.org
--- openssl-0.9.8b/Makefile.org	2006-02-10 08:52:56.000000000 +0000
+++ openssl-0.9.8b-new/Makefile.org	2006-05-19 02:02:41.048137327 +0000
@@ -70,6 +70,7 @@
 TAR= tar
 TARFLAGS= --no-recursion
 MAKEDEPPROG=makedepend
+LIBDIR=lib
 
 # We let the C compiler driver to take care of .s files. This is done in
 # order to be excused from maintaining a separate set of architecture
@@ -172,7 +173,7 @@
 		CC='${CC}' CFLAG='${CFLAG}' 			\
 		AS='${CC}' ASFLAG='${CFLAG} -c'			\
 		AR='${AR}' PERL='${PERL}' RANLIB='${RANLIB}'	\
-		SDIRS='${SDIRS}' LIBRPATH='${INSTALLTOP}/lib'	\
+		SDIRS='${SDIRS}' LIBRPATH='${INSTALLTOP}/$(LIBDIR)'	\
 		INSTALL_PREFIX='${INSTALL_PREFIX}'		\
 		INSTALLTOP='${INSTALLTOP}' OPENSSLDIR='${OPENSSLDIR}'	\
 		MAKEDEPEND='$$$${TOP}/util/domd $$$${TOP} -MD ${MAKEDEPPROG}' \
@@ -301,7 +302,7 @@
 libcrypto.pc: Makefile
 	@ ( echo 'prefix=$(INSTALLTOP)'; \
 	    echo 'exec_prefix=$${prefix}'; \
-	    echo 'libdir=$${exec_prefix}/lib'; \
+	    echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
 	    echo 'includedir=$${prefix}/include'; \
 	    echo ''; \
 	    echo 'Name: OpenSSL-libcrypto'; \
@@ -314,7 +315,7 @@
 libssl.pc: Makefile
 	@ ( echo 'prefix=$(INSTALLTOP)'; \
 	    echo 'exec_prefix=$${prefix}'; \
-	    echo 'libdir=$${exec_prefix}/lib'; \
+	    echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
 	    echo 'includedir=$${prefix}/include'; \
 	    echo ''; \
 	    echo 'Name: OpenSSL'; \
@@ -327,7 +328,7 @@
 openssl.pc: Makefile
 	@ ( echo 'prefix=$(INSTALLTOP)'; \
 	    echo 'exec_prefix=$${prefix}'; \
-	    echo 'libdir=$${exec_prefix}/lib'; \
+	    echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
 	    echo 'includedir=$${prefix}/include'; \
 	    echo ''; \
 	    echo 'Name: OpenSSL'; \
@@ -477,9 +478,9 @@
 
 install_sw:
 	@$(PERL) $(TOP)/util/mkdir-p.pl $(INSTALL_PREFIX)$(INSTALLTOP)/bin \
-		$(INSTALL_PREFIX)$(INSTALLTOP)/lib \
-		$(INSTALL_PREFIX)$(INSTALLTOP)/lib/engines \
-		$(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig \
+		$(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR) \
+		$(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/engines \
+		$(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig \
 		$(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl \
 		$(INSTALL_PREFIX)$(OPENSSLDIR)/misc \
 		$(INSTALL_PREFIX)$(OPENSSLDIR)/certs \
@@ -494,10 +495,10 @@
 	do \
 		if [ -f "$$i" ]; then \
 		(       echo installing $$i; \
-			cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
-			$(RANLIB) $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
-			chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
-			mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i ); \
+			cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+			$(RANLIB) $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+			chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+			mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i ); \
 		fi; \
 	done;
 	@set -e; if [ -n "$(SHARED_LIBS)" ]; then \
@@ -507,22 +508,22 @@
 			if [ -f "$$i" -o -f "$$i.a" ]; then \
 			(       echo installing $$i; \
 				if [ "$(PLATFORM)" != "Cygwin" ]; then \
-					cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
-					chmod 555 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
-					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i; \
+					cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+					chmod 555 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i; \
 				else \
 					c=`echo $$i | sed 's/^lib\(.*\)\.dll\.a/cyg\1-$(SHLIB_VERSION_NUMBER).dll/'`; \
 					cp $$c $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
 					chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
 					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c; \
-					cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
-					chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
-					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i; \
+					cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+					chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i; \
 				fi ); \
 			fi; \
 		done; \
 		(	here="`pwd`"; \
-			cd $(INSTALL_PREFIX)$(INSTALLTOP)/lib; \
+			cd $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR); \
 			$(MAKE) -f $$here/Makefile HERE="$$here" link-shared ); \
 		if [ "$(INSTALLTOP)" != "/usr" ]; then \
 			echo 'OpenSSL shared libraries have been installed in:'; \
@@ -531,12 +532,12 @@
 			sed -e '1,/^$$/d' doc/openssl-shared.txt; \
 		fi; \
 	fi
-	cp libcrypto.pc $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig/libcrypto.pc
-	cp libssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig/libssl.pc
-	cp openssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig/openssl.pc
+	cp libcrypto.pc $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig
+	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/libcrypto.pc
+	cp libssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig
+	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/libssl.pc
+	cp openssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig
+	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/openssl.pc
 
 install_docs:
 	@$(PERL) $(TOP)/util/mkdir-p.pl \
diff -Naur openssl-0.9.8b/Makefile.org.orig openssl-0.9.8b-new/Makefile.org.orig
--- openssl-0.9.8b/Makefile.org.orig	1970-01-01 00:00:00.000000000 +0000
+++ openssl-0.9.8b-new/Makefile.org.orig	2006-02-10 08:52:56.000000000 +0000
@@ -0,0 +1,588 @@
+##
+## Makefile for OpenSSL
+##
+
+VERSION=
+MAJOR=
+MINOR=
+SHLIB_VERSION_NUMBER=
+SHLIB_VERSION_HISTORY=
+SHLIB_MAJOR=
+SHLIB_MINOR=
+SHLIB_EXT=
+PLATFORM=dist
+OPTIONS=
+CONFIGURE_ARGS=
+SHLIB_TARGET=
+
+# HERE indicates where this Makefile lives.  This can be used to indicate
+# where sub-Makefiles are expected to be.  Currently has very limited usage,
+# and should probably not be bothered with at all.
+HERE=.
+
+# INSTALL_PREFIX is for package builders so that they can configure
+# for, say, /usr/ and yet have everything installed to /tmp/somedir/usr/.
+# Normally it is left empty.
+INSTALL_PREFIX=
+INSTALLTOP=/usr/local/ssl
+
+# Do not edit this manually. Use Configure --openssldir=DIR do change this!
+OPENSSLDIR=/usr/local/ssl
+
+# NO_IDEA - Define to build without the IDEA algorithm
+# NO_RC4  - Define to build without the RC4 algorithm
+# NO_RC2  - Define to build without the RC2 algorithm
+# THREADS - Define when building with threads, you will probably also need any
+#           system defines as well, i.e. _REENTERANT for Solaris 2.[34]
+# TERMIO  - Define the termio terminal subsystem, needed if sgtty is missing.
+# TERMIOS - Define the termios terminal subsystem, Silicon Graphics.
+# LONGCRYPT - Define to use HPUX 10.x's long password modification to crypt(3).
+# DEVRANDOM - Give this the value of the 'random device' if your OS supports
+#           one.  32 bytes will be read from this when the random
+#           number generator is initalised.
+# SSL_FORBID_ENULL - define if you want the server to be not able to use the
+#           NULL encryption ciphers.
+#
+# LOCK_DEBUG - turns on lots of lock debug output :-)
+# REF_CHECK - turn on some xyz_free() assertions.
+# REF_PRINT - prints some stuff on structure free.
+# CRYPTO_MDEBUG - turns on my 'memory leak' detecting stuff
+# MFUNC - Make all Malloc/Free/Realloc calls call
+#       CRYPTO_malloc/CRYPTO_free/CRYPTO_realloc which can be setup to
+#       call application defined callbacks via CRYPTO_set_mem_functions()
+# MD5_ASM needs to be defined to use the x86 assembler for MD5
+# SHA1_ASM needs to be defined to use the x86 assembler for SHA1
+# RMD160_ASM needs to be defined to use the x86 assembler for RIPEMD160
+# Do not define B_ENDIAN or L_ENDIAN if 'unsigned long' == 8.  It must
+# equal 4.
+# PKCS1_CHECK - pkcs1 tests.
+
+CC= cc
+CFLAG= -O
+DEPFLAG= 
+PEX_LIBS= 
+EX_LIBS= 
+EXE_EXT= 
+ARFLAGS=
+AR=ar $(ARFLAGS) r
+RANLIB= ranlib
+PERL= perl
+TAR= tar
+TARFLAGS= --no-recursion
+MAKEDEPPROG=makedepend
+
+# We let the C compiler driver to take care of .s files. This is done in
+# order to be excused from maintaining a separate set of architecture
+# dependent assembler flags. E.g. if you throw -mcpu=ultrasparc at SPARC
+# gcc, then the driver will automatically translate it to -xarch=v8plus
+# and pass it down to assembler.
+AS=$(CC) -c
+ASFLAG=$(CFLAG)
+
+# For x86 assembler: Set PROCESSOR to 386 if you want to support
+# the 80386.
+PROCESSOR=
+
+# CPUID module collects small commonly used assembler snippets
+CPUID_OBJ= 
+BN_ASM= bn_asm.o
+DES_ENC= des_enc.o fcrypt_b.o
+AES_ASM_OBJ=aes_core.o aes_cbc.o
+BF_ENC= bf_enc.o
+CAST_ENC= c_enc.o
+RC4_ENC= rc4_enc.o
+RC5_ENC= rc5_enc.o
+MD5_ASM_OBJ= 
+SHA1_ASM_OBJ= 
+RMD160_ASM_OBJ= 
+
+# KRB5 stuff
+KRB5_INCLUDES=
+LIBKRB5=
+
+# Zlib stuff
+ZLIB_INCLUDE=
+LIBZLIB=
+
+DIRS=   crypto ssl engines apps test tools
+SHLIBDIRS= crypto ssl
+
+# dirs in crypto to build
+SDIRS=  \
+	objects \
+	md2 md4 md5 sha mdc2 hmac ripemd \
+	des aes rc2 rc4 rc5 idea bf cast \
+	bn ec rsa dsa ecdsa dh ecdh dso engine \
+	buffer bio stack lhash rand err \
+	evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp ocsp ui krb5 \
+	store pqueue
+# keep in mind that the above list is adjusted by ./Configure
+# according to no-xxx arguments...
+
+# tests to perform.  "alltests" is a special word indicating that all tests
+# should be performed.
+TESTS = alltests
+
+MAKEFILE= Makefile
+
+MANDIR=$(OPENSSLDIR)/man
+MAN1=1
+MAN3=3
+MANSUFFIX=
+SHELL=/bin/sh
+
+TOP=    .
+ONEDIRS=out tmp
+EDIRS=  times doc bugs util include certs ms shlib mt demos perl sf dep VMS
+WDIRS=  windows
+LIBS=   libcrypto.a libssl.a
+SHARED_CRYPTO=libcrypto$(SHLIB_EXT)
+SHARED_SSL=libssl$(SHLIB_EXT)
+SHARED_LIBS=
+SHARED_LIBS_LINK_EXTS=
+SHARED_LDFLAGS=
+
+GENERAL=        Makefile
+BASENAME=       openssl
+NAME=           $(BASENAME)-$(VERSION)
+TARFILE=        $(NAME).tar
+WTARFILE=       $(NAME)-win.tar
+EXHEADER=       e_os2.h
+HEADER=         e_os.h
+
+all: Makefile build_all openssl.pc libssl.pc libcrypto.pc
+
+# as we stick to -e, CLEARENV ensures that local variables in lower
+# Makefiles remain local and variable. $${VAR+VAR} is tribute to Korn
+# shell, which [annoyingly enough] terminates unset with error if VAR
+# is not present:-( TOP= && unset TOP is tribute to HP-UX /bin/sh,
+# which terminates unset with error if no variable was present:-(
+CLEARENV=	TOP= && unset TOP $${LIB+LIB} $${LIBS+LIBS}	\
+		$${INCLUDE+INCLUDE} $${INCLUDES+INCLUDES}	\
+		$${DIR+DIR} $${DIRS+DIRS} $${SRC+SRC}		\
+		$${LIBSRC+LIBSRC} $${LIBOBJ+LIBOBJ} $${ALL+ALL}	\
+		$${EXHEADER+EXHEADER} $${HEADER+HEADER}		\
+		$${GENERAL+GENERAL} $${CFLAGS+CFLAGS}		\
+		$${ASFLAGS+ASFLAGS} $${AFLAGS+AFLAGS}		\
+		$${LDCMD+LDCMD} $${LDFLAGS+LDFLAGS}		\
+		$${SHAREDCMD+SHAREDCMD} $${SHAREDFLAGS+SHAREDFLAGS}	\
+		$${SHARED_LIB+SHARED_LIB} $${LIBEXTRAS+LIBEXTRAS}
+
+BUILDENV=	PLATFORM='${PLATFORM}' PROCESSOR='${PROCESSOR}' \
+		CC='${CC}' CFLAG='${CFLAG}' 			\
+		AS='${CC}' ASFLAG='${CFLAG} -c'			\
+		AR='${AR}' PERL='${PERL}' RANLIB='${RANLIB}'	\
+		SDIRS='${SDIRS}' LIBRPATH='${INSTALLTOP}/lib'	\
+		INSTALL_PREFIX='${INSTALL_PREFIX}'		\
+		INSTALLTOP='${INSTALLTOP}' OPENSSLDIR='${OPENSSLDIR}'	\
+		MAKEDEPEND='$$$${TOP}/util/domd $$$${TOP} -MD ${MAKEDEPPROG}' \
+		DEPFLAG='-DOPENSSL_NO_DEPRECATED ${DEPFLAG}'	\
+		MAKEDEPPROG='${MAKEDEPPROG}'			\
+		SHARED_LDFLAGS='${SHARED_LDFLAGS}'		\
+		KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}'	\
+		EXE_EXT='${EXE_EXT}' SHARED_LIBS='${SHARED_LIBS}'	\
+		SHLIB_EXT='${SHLIB_EXT}' SHLIB_TARGET='${SHLIB_TARGET}'	\
+		PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}'	\
+		CPUID_OBJ='${CPUID_OBJ}'			\
+		BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' 	\
+		AES_ASM_OBJ='${AES_ASM_OBJ}'			\
+		BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}'	\
+		RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}'	\
+		SHA1_ASM_OBJ='${SHA1_ASM_OBJ}'			\
+		MD5_ASM_OBJ='${MD5_ASM_OBJ}'			\
+		RMD160_ASM_OBJ='${RMD160_ASM_OBJ}'		\
+		THIS=$${THIS:-$@} MAKEFILE=Makefile MAKEOVERRIDES=
+# MAKEOVERRIDES= effectively "equalizes" GNU-ish and SysV-ish make flavors,
+# which in turn eliminates ambiguities in variable treatment with -e.
+
+# BUILD_CMD is a generic macro to build a given target in a given
+# subdirectory.  The target must be given through the shell variable
+# `target' and the subdirectory to build in must be given through `dir'.
+# This macro shouldn't be used directly, use RECURSIVE_BUILD_CMD or
+# BUILD_ONE_CMD instead.
+#
+# BUILD_ONE_CMD is a macro to build a given target in a given
+# subdirectory if that subdirectory is part of $(DIRS).  It requires
+# exactly the same shell variables as BUILD_CMD.
+#
+# RECURSIVE_BUILD_CMD is a macro to build a given target in all
+# subdirectories defined in $(DIRS).  It requires that the target
+# is given through the shell variable `target'.
+BUILD_CMD=  if [ -d "$$dir" ]; then \
+	    (	cd $$dir && echo "making $$target in $$dir..." && \
+		$(CLEARENV) && $(MAKE) -e $(BUILDENV) TOP=.. DIR=$$dir $$target \
+	    ) || exit 1; \
+	    fi
+RECURSIVE_BUILD_CMD=for dir in $(DIRS); do $(BUILD_CMD); done
+BUILD_ONE_CMD=\
+	if echo " $(DIRS) " | grep " $$dir " >/dev/null 2>/dev/null; then \
+		$(BUILD_CMD); \
+	fi
+
+reflect:
+	@[ -n "$(THIS)" ] && $(CLEARENV) && $(MAKE) $(THIS) -e $(BUILDENV)
+
+sub_all: build_all
+build_all: build_libs build_apps build_tests build_tools
+
+build_libs: build_crypto build_ssl build_engines
+
+build_crypto:
+	@dir=crypto; target=all; $(BUILD_ONE_CMD)
+build_ssl:
+	@dir=ssl; target=all; $(BUILD_ONE_CMD)
+build_engines:
+	@dir=engines; target=all; $(BUILD_ONE_CMD)
+build_apps:
+	@dir=apps; target=all; $(BUILD_ONE_CMD)
+build_tests:
+	@dir=test; target=all; $(BUILD_ONE_CMD)
+build_tools:
+	@dir=tools; target=all; $(BUILD_ONE_CMD)
+
+all_testapps: build_libs build_testapps
+build_testapps:
+	@dir=crypto; target=testapps; $(BUILD_ONE_CMD)
+
+libcrypto$(SHLIB_EXT): libcrypto.a
+	@if [ "$(SHLIB_TARGET)" != "" ]; then \
+		$(MAKE) SHLIBDIRS=crypto build-shared; \
+	else \
+		echo "There's no support for shared libraries on this platform" >&2; \
+		exit 1; \
+	fi
+
+libssl$(SHLIB_EXT): libcrypto$(SHLIB_EXT) libssl.a
+	@if [ "$(SHLIB_TARGET)" != "" ]; then \
+		$(MAKE) SHLIBDIRS=ssl SHLIBDEPS='-lcrypto' build-shared; \
+	else \
+		echo "There's no support for shared libraries on this platform" >&2; \
+		exit 1; \
+	fi
+
+clean-shared:
+	@set -e; for i in $(SHLIBDIRS); do \
+		if [ -n "$(SHARED_LIBS_LINK_EXTS)" ]; then \
+			tmp="$(SHARED_LIBS_LINK_EXTS)"; \
+			for j in $${tmp:-x}; do \
+				( set -x; rm -f lib$$i$$j ); \
+			done; \
+		fi; \
+		( set -x; rm -f lib$$i$(SHLIB_EXT) ); \
+		if [ "$(PLATFORM)" = "Cygwin" ]; then \
+			( set -x; rm -f cyg$$i$(SHLIB_EXT) lib$$i$(SHLIB_EXT).a ); \
+		fi; \
+	done
+
+link-shared:
+	@ set -e; for i in ${SHLIBDIRS}; do \
+		$(MAKE) -f $(HERE)/Makefile.shared -e $(BUILDENV) \
+			LIBNAME=$$i LIBVERSION=${SHLIB_MAJOR}.${SHLIB_MINOR} \
+			LIBCOMPATVERSIONS=";${SHLIB_VERSION_HISTORY}" \
+			symlink.$(SHLIB_TARGET); \
+		libs="$$libs -l$$i"; \
+	done
+
+build-shared: do_$(SHLIB_TARGET) link-shared
+
+do_$(SHLIB_TARGET):
+	@ set -e; libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+		if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+			libs="$(LIBKRB5) $$libs"; \
+		fi; \
+		$(CLEARENV) && $(MAKE) -f Makefile.shared -e $(BUILDENV) \
+			LIBNAME=$$i LIBVERSION=${SHLIB_MAJOR}.${SHLIB_MINOR} \
+			LIBCOMPATVERSIONS=";${SHLIB_VERSION_HISTORY}" \
+			LIBDEPS="$$libs $(EX_LIBS)" \
+			link_a.$(SHLIB_TARGET); \
+		libs="-l$$i $$libs"; \
+	done
+
+libcrypto.pc: Makefile
+	@ ( echo 'prefix=$(INSTALLTOP)'; \
+	    echo 'exec_prefix=$${prefix}'; \
+	    echo 'libdir=$${exec_prefix}/lib'; \
+	    echo 'includedir=$${prefix}/include'; \
+	    echo ''; \
+	    echo 'Name: OpenSSL-libcrypto'; \
+	    echo 'Description: OpenSSL cryptography library'; \
+	    echo 'Version: '$(VERSION); \
+	    echo 'Requires: '; \
+	    echo 'Libs: -L$${libdir} -lcrypto $(EX_LIBS)'; \
+	    echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > libcrypto.pc
+
+libssl.pc: Makefile
+	@ ( echo 'prefix=$(INSTALLTOP)'; \
+	    echo 'exec_prefix=$${prefix}'; \
+	    echo 'libdir=$${exec_prefix}/lib'; \
+	    echo 'includedir=$${prefix}/include'; \
+	    echo ''; \
+	    echo 'Name: OpenSSL'; \
+	    echo 'Description: Secure Sockets Layer and cryptography libraries'; \
+	    echo 'Version: '$(VERSION); \
+	    echo 'Requires: '; \
+	    echo 'Libs: -L$${libdir} -lssl -lcrypto $(EX_LIBS)'; \
+	    echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > libssl.pc
+
+openssl.pc: Makefile
+	@ ( echo 'prefix=$(INSTALLTOP)'; \
+	    echo 'exec_prefix=$${prefix}'; \
+	    echo 'libdir=$${exec_prefix}/lib'; \
+	    echo 'includedir=$${prefix}/include'; \
+	    echo ''; \
+	    echo 'Name: OpenSSL'; \
+	    echo 'Description: Secure Sockets Layer and cryptography libraries and tools'; \
+	    echo 'Version: '$(VERSION); \
+	    echo 'Requires: '; \
+	    echo 'Libs: -L$${libdir} -lssl -lcrypto $(EX_LIBS)'; \
+	    echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > openssl.pc
+
+Makefile: Makefile.org Configure config
+	@echo "Makefile is older than Makefile.org, Configure or config."
+	@echo "Reconfigure the source tree (via './config' or 'perl Configure'), please."
+	@false
+
+libclean:
+	rm -f *.map *.so *.so.* *.dll engines/*.so engines/*.dll *.a engines/*.a */lib */*/lib
+
+clean:	libclean
+	rm -f shlib/*.o *.o core a.out fluff rehash.time testlog make.log cctest cctest.c
+	@set -e; target=clean; $(RECURSIVE_BUILD_CMD)
+	rm -f $(LIBS)
+	rm -f openssl.pc libssl.pc libcrypto.pc
+	rm -f speed.* .pure
+	rm -f $(TARFILE)
+	@set -e; for i in $(ONEDIRS) ;\
+	do \
+	rm -fr $$i/*; \
+	done
+
+makefile.one: files
+	$(PERL) util/mk1mf.pl >makefile.one; \
+	sh util/do_ms.sh
+
+files:
+	$(PERL) $(TOP)/util/files.pl Makefile > $(TOP)/MINFO
+	@set -e; target=files; $(RECURSIVE_BUILD_CMD)
+
+links:
+	@$(PERL) $(TOP)/util/mkdir-p.pl include/openssl
+	@$(PERL) $(TOP)/util/mklink.pl include/openssl $(EXHEADER)
+	@set -e; target=links; $(RECURSIVE_BUILD_CMD)
+
+gentests:
+	@(cd test && echo "generating dummy tests (if needed)..." && \
+	$(CLEARENV) && $(MAKE) -e $(BUILDENV) TESTS='${TESTS}' OPENSSL_DEBUG_MEMORY=on generate );
+
+dclean:
+	rm -f *.bak
+	@set -e; target=dclean; $(RECURSIVE_BUILD_CMD)
+
+rehash: rehash.time
+rehash.time: certs
+	@(OPENSSL="`pwd`/util/opensslwrap.sh"; \
+	  OPENSSL_DEBUG_MEMORY=on; \
+	  export OPENSSL OPENSSL_DEBUG_MEMORY; \
+	  $(PERL) tools/c_rehash certs)
+	touch rehash.time
+
+test:   tests
+
+tests: rehash
+	@(cd test && echo "testing..." && \
+	$(CLEARENV) && $(MAKE) -e $(BUILDENV) TOP=.. TESTS='${TESTS}' OPENSSL_DEBUG_MEMORY=on tests );
+	util/opensslwrap.sh version -a
+
+report:
+	@$(PERL) util/selftest.pl
+
+depend:
+	@set -e; target=depend; $(RECURSIVE_BUILD_CMD)
+
+lint:
+	@set -e; target=lint; $(RECURSIVE_BUILD_CMD)
+
+tags:
+	rm -f TAGS
+	find . -name '[^.]*.[ch]' | xargs etags -a
+
+errors:
+	$(PERL) util/mkerr.pl -recurse -write
+	(cd engines; $(MAKE) PERL=$(PERL) errors)
+	$(PERL) util/ck_errf.pl */*.c */*/*.c
+
+stacks:
+	$(PERL) util/mkstack.pl -write
+
+util/libeay.num::
+	$(PERL) util/mkdef.pl crypto update
+
+util/ssleay.num::
+	$(PERL) util/mkdef.pl ssl update
+
+crypto/objects/obj_dat.h: crypto/objects/obj_dat.pl crypto/objects/obj_mac.h
+	$(PERL) crypto/objects/obj_dat.pl crypto/objects/obj_mac.h crypto/objects/obj_dat.h
+crypto/objects/obj_mac.h: crypto/objects/objects.pl crypto/objects/objects.txt crypto/objects/obj_mac.num
+	$(PERL) crypto/objects/objects.pl crypto/objects/objects.txt crypto/objects/obj_mac.num crypto/objects/obj_mac.h
+
+apps/openssl-vms.cnf: apps/openssl.cnf
+	$(PERL) VMS/VMSify-conf.pl < apps/openssl.cnf > apps/openssl-vms.cnf
+
+crypto/bn/bn_prime.h: crypto/bn/bn_prime.pl
+	$(PERL) crypto/bn/bn_prime.pl >crypto/bn/bn_prime.h
+
+
+TABLE: Configure
+	(echo 'Output of `Configure TABLE'"':"; \
+	$(PERL) Configure TABLE) > TABLE
+
+update: errors stacks util/libeay.num util/ssleay.num crypto/objects/obj_dat.h apps/openssl-vms.cnf crypto/bn/bn_prime.h TABLE depend
+
+# Build distribution tar-file. As the list of files returned by "find" is
+# pretty long, on several platforms a "too many arguments" error or similar
+# would occur. Therefore the list of files is temporarily stored into a file
+# and read directly, requiring GNU-Tar. Call "make TAR=gtar dist" if the normal
+# tar does not support the --files-from option.
+tar:
+	find . -type d -print | xargs chmod 755
+	find . -type f -print | xargs chmod a+r
+	find . -type f -perm -0100 -print | xargs chmod a+x
+	find * \! -path CVS/\* \! -path \*/CVS/\* \! -name CVS \! -name .cvsignore \! -name STATUS \! -name TABLE | sort > ../$(TARFILE).list; \
+	$(TAR) $(TARFLAGS) --files-from ../$(TARFILE).list -cvf - | \
+	tardy --user_number=0  --user_name=openssl \
+	      --group_number=0 --group_name=openssl \
+	      --prefix=openssl-$(VERSION) - |\
+	gzip --best >../$(TARFILE).gz; \
+	rm -f ../$(TARFILE).list; \
+	ls -l ../$(TARFILE).gz
+
+tar-snap:
+	@$(TAR) $(TARFLAGS) -cvf - \
+		`find * \! -path CVS/\* \! -path \*/CVS/\* \! -name CVS \! -name .cvsignore \! -name STATUS \! -name TABLE \! -name '*.o' \! -name '*.a' \! -name '*.so' \! -name '*.so.*'  \! -name 'openssl' \! -name '*test' \! -name '.#*' \! -name '*~' | sort` |\
+	tardy --user_number=0  --user_name=openssl \
+	      --group_number=0 --group_name=openssl \
+	      --prefix=openssl-$(VERSION) - > ../$(TARFILE);\
+	ls -l ../$(TARFILE)
+
+dist:   
+	$(PERL) Configure dist
+	@$(MAKE) dist_pem_h
+	@$(MAKE) SDIRS='${SDIRS}' clean
+	@$(MAKE) TAR='${TAR}' TARFLAGS='${TARFLAGS}' tar
+
+dist_pem_h:
+	(cd crypto/pem; $(MAKE) -e $(BUILDENV) pem.h; $(MAKE) clean)
+
+install: all install_docs install_sw
+
+install_sw:
+	@$(PERL) $(TOP)/util/mkdir-p.pl $(INSTALL_PREFIX)$(INSTALLTOP)/bin \
+		$(INSTALL_PREFIX)$(INSTALLTOP)/lib \
+		$(INSTALL_PREFIX)$(INSTALLTOP)/lib/engines \
+		$(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig \
+		$(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl \
+		$(INSTALL_PREFIX)$(OPENSSLDIR)/misc \
+		$(INSTALL_PREFIX)$(OPENSSLDIR)/certs \
+		$(INSTALL_PREFIX)$(OPENSSLDIR)/private
+	@set -e; headerlist="$(EXHEADER)"; for i in $$headerlist;\
+	do \
+	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
+	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
+	done;
+	@set -e; target=install; $(RECURSIVE_BUILD_CMD)
+	@set -e; for i in $(LIBS) ;\
+	do \
+		if [ -f "$$i" ]; then \
+		(       echo installing $$i; \
+			cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
+			$(RANLIB) $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
+			chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
+			mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i ); \
+		fi; \
+	done;
+	@set -e; if [ -n "$(SHARED_LIBS)" ]; then \
+		tmp="$(SHARED_LIBS)"; \
+		for i in $${tmp:-x}; \
+		do \
+			if [ -f "$$i" -o -f "$$i.a" ]; then \
+			(       echo installing $$i; \
+				if [ "$(PLATFORM)" != "Cygwin" ]; then \
+					cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
+					chmod 555 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
+					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i; \
+				else \
+					c=`echo $$i | sed 's/^lib\(.*\)\.dll\.a/cyg\1-$(SHLIB_VERSION_NUMBER).dll/'`; \
+					cp $$c $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
+					chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
+					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c; \
+					cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
+					chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
+					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i; \
+				fi ); \
+			fi; \
+		done; \
+		(	here="`pwd`"; \
+			cd $(INSTALL_PREFIX)$(INSTALLTOP)/lib; \
+			$(MAKE) -f $$here/Makefile HERE="$$here" link-shared ); \
+		if [ "$(INSTALLTOP)" != "/usr" ]; then \
+			echo 'OpenSSL shared libraries have been installed in:'; \
+			echo '  $(INSTALLTOP)'; \
+			echo ''; \
+			sed -e '1,/^$$/d' doc/openssl-shared.txt; \
+		fi; \
+	fi
+	cp libcrypto.pc $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig
+	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig/libcrypto.pc
+	cp libssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig
+	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig/libssl.pc
+	cp openssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig
+	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig/openssl.pc
+
+install_docs:
+	@$(PERL) $(TOP)/util/mkdir-p.pl \
+		$(INSTALL_PREFIX)$(MANDIR)/man1 \
+		$(INSTALL_PREFIX)$(MANDIR)/man3 \
+		$(INSTALL_PREFIX)$(MANDIR)/man5 \
+		$(INSTALL_PREFIX)$(MANDIR)/man7
+	@pod2man="`cd util; ./pod2mantest $(PERL)`"; \
+	here="`pwd`"; \
+	filecase=; \
+	if [ "$(PLATFORM)" = "DJGPP" -o "$(PLATFORM)" = "Cygwin" -o "$(PLATFORM)" = "mingw" ]; then \
+		filecase=-i; \
+	fi; \
+	set -e; for i in doc/apps/*.pod; do \
+		fn=`basename $$i .pod`; \
+		sec=`$(PERL) util/extract-section.pl 1 < $$i`; \
+		echo "installing man$$sec/$$fn.$${sec}$(MANSUFFIX)"; \
+		(cd `$(PERL) util/dirname.pl $$i`; \
+		sh -c "$$pod2man \
+			--section=$$sec --center=OpenSSL \
+			--release=$(VERSION) `basename $$i`") \
+			>  $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
+		$(PERL) util/extract-names.pl < $$i | \
+			(grep -v $$filecase "^$$fn\$$"; true) | \
+			(grep -v "[	]"; true) | \
+			(cd $(INSTALL_PREFIX)$(MANDIR)/man$$sec/; \
+			 while read n; do \
+				$$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
+			 done); \
+	done; \
+	set -e; for i in doc/crypto/*.pod doc/ssl/*.pod; do \
+		fn=`basename $$i .pod`; \
+		sec=`$(PERL) util/extract-section.pl 3 < $$i`; \
+		echo "installing man$$sec/$$fn.$${sec}$(MANSUFFIX)"; \
+		(cd `$(PERL) util/dirname.pl $$i`; \
+		sh -c "$$pod2man \
+			--section=$$sec --center=OpenSSL \
+			--release=$(VERSION) `basename $$i`") \
+			>  $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
+		$(PERL) util/extract-names.pl < $$i | \
+			(grep -v $$filecase "^$$fn\$$"; true) | \
+			(grep -v "[	]"; true) | \
+			(cd $(INSTALL_PREFIX)$(MANDIR)/man$$sec/; \
+			 while read n; do \
+				$$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
+			 done); \
+	done
+
+# DO NOT DELETE THIS LINE -- make depend depends on it.
diff -Naur openssl-0.9.8b/engines/Makefile openssl-0.9.8b-new/engines/Makefile
--- openssl-0.9.8b/engines/Makefile	2006-02-04 01:49:34.000000000 +0000
+++ openssl-0.9.8b-new/engines/Makefile	2006-05-19 02:00:52.158523141 +0000
@@ -97,13 +97,13 @@
 				*DSO_DL*)	sfx="sl";;	\
 				*)		sfx="bad";;	\
 				esac; \
-				cp lib$$l.$$sfx $(INSTALL_PREFIX)$(INSTALLTOP)/lib/engines/lib$$l.$$sfx.new; \
+				cp lib$$l.$$sfx $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/engines/lib$$l.$$sfx.new; \
 			  else \
 			  	sfx="so"; \
 				cp cyg$$l.dll $(INSTALL_PREFIX)$(INSTALLTOP)/lib/engines/lib$$l.$$sfx.new; \
 			  fi; \
-			  chmod 555 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/engines/lib$$l.$$sfx.new; \
-			  mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/lib/engines/lib$$l.$$sfx.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/engines/lib$$l.$$sfx ); \
+			  chmod 555 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/engines/lib$$l.$$sfx.new; \
+			  mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/engines/lib$$l.$$sfx.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/engines/lib$$l.$$sfx ); \
 		done; \
 	fi
 