trunk/ppp/provider.example

# kernel space PPPoE driver configuration
#
# See the manual page pppd(8) for information on all the options.

# MUST CHANGE: Uncomment the following line, replacing the user@provider.net
# by the DSL user name given to your by your DSL provider.
# There should be a matching entry with the password in /etc/ppp/pap-secrets
# and/or /etc/ppp/chap-secrets.
#user "myusername@myprovider.net"

#linkname provider
#debug

# Load the pppoe plugin. Change the ethernet interface name if needed.
plugin rp-pppoe.so
eth0

# Assumes that your IP address is allocated dynamically by the ISP.
noipdefault
# Try to get the name server addresses from the ISP.
usepeerdns
# Use this connection as the default route.
# Comment out if you already have the correct default route installed.
defaultroute

# Make sure that sensitive data does not get into the logs
hide-password

# Peer should be alive
lcp-echo-interval 20
lcp-echo-failure 3

# Makes pppd "dial again" when the connection is lost.
persist

# Do not ask the remote to authenticate.
noauth

# RFC 2516, paragraph 7 mandates that the following options MUST NOT be
# requested and MUST be rejected if requested by the peer:
# Address-and-Control-Field-Compression (ACFC)
noaccomp
# Asynchronous-Control-Character-Map (ACCM)
default-asyncmap

# Do not try to negotiate other kinds of compression.
nopcomp
noccp
novj
1	# kernel space PPPoE driver configuration
2	#
3	# See the manual page pppd(8) for information on all the options.
4
5	# MUST CHANGE: Uncomment the following line, replacing the user@provider.net
6	# by the DSL user name given to your by your DSL provider.
7	# There should be a matching entry with the password in /etc/ppp/pap-secrets
8	# and/or /etc/ppp/chap-secrets.
9	#user "myusername@myprovider.net"
10
11	#linkname provider
12	#debug
13
14	# Load the pppoe plugin. Change the ethernet interface name if needed.
15	plugin rp-pppoe.so
16	eth0
17
18	# Assumes that your IP address is allocated dynamically by the ISP.
19	noipdefault
20	# Try to get the name server addresses from the ISP.
21	usepeerdns
22	# Use this connection as the default route.
23	# Comment out if you already have the correct default route installed.
24	defaultroute
25
26	# Make sure that sensitive data does not get into the logs
27	hide-password
28
29	# Peer should be alive
30	lcp-echo-interval 20
31	lcp-echo-failure 3
32
33	# Makes pppd "dial again" when the connection is lost.
34	persist
35
36	# Do not ask the remote to authenticate.
37	noauth
38
39	# RFC 2516, paragraph 7 mandates that the following options MUST NOT be
40	# requested and MUST be rejected if requested by the peer:
41	# Address-and-Control-Field-Compression (ACFC)
42	noaccomp
43	# Asynchronous-Control-Character-Map (ACCM)
44	default-asyncmap
45
46	# Do not try to negotiate other kinds of compression.
47	nopcomp
48	noccp
49	novj