trunk/rsyslog/rsyslog.conf

# rsyslog v5: load input modules
# If you do not load inputs, nothing happens!
# You may need to set the module load path if modules are not found.

$ModLoad immark.so # provides --MARK-- message capability
$ModLoad imuxsock.so # provides support for local system logging (e.g. via logger command)
$ModLoad imklog.so # kernel logging (formerly provided by rklogd)

# Include configuration files from directory
$IncludeConfig /etc/rsyslog.d/*

# Check config syntax on startup and abort if unclean (default off)
#$AbortOnUncleanConfig on

# Reduce repeating messages (default off)
#$RepeatedMsgReduction on

# Log all kernel messages to the console.
# Logging much else clutters up the screen.
#kern.*                                                 /dev/console

# Log anything (except mail) of level info or higher.
# Don't log private authentication messages!
*.info;mail.none;authpriv.none;cron.none                -/var/log/messages

# The authpriv file has restricted access.
authpriv.*                                              /var/log/secure

# Log all the mail messages in one place.
mail.*                                                  -/var/log/maillog

# Log cron stuff
cron.*                                                  -/var/log/cron

# Everybody gets emergency messages
*.emerg                                                 *

# Save news errors of level crit and higher in a special file.
uucp,news.crit                                          -/var/log/spooler

# Save boot messages also to boot.log
local7.*                                                /var/log/boot.log

# More configuration examples:
#
# Remote Logging (we use TCP for reliable delivery)
# An on-disk queue is created for this action. If the remote host is
# down, messages are spooled to disk and sent when it is up again.
#$WorkDirectory /var/spool/rsyslog # where to place spool files
#$ActionQueueFileName uniqName # unique name prefix for spool files
#$ActionQueueMaxDiskSpace 1g   # 1gb space limit (use as much as possible)
#$ActionQueueSaveOnShutdown on # save messages to disk on shutdown
#$ActionQueueType LinkedList   # run asynchronously
#$ActionResumeRetryCount -1    # infinety retries if host is down
#$ActionResumeInterval 30      # retry interval
# remote host is: name/ip:port, e.g. 192.168.0.1:514, port optional
#*.* @@remote-host

# Remote Logging with TCP + SSL/TLS
#$DefaultNetstreamDriver gtls
#$DefaultNetstreamDriverCAFile /etc/ssl/rsyslog/rsyslog_ca.cert.pem
#$DefaultNetstreamDriverCertFile /etc/ssl/rsyslog/rsyslog_CLIENT.cert.pem
#$DefaultNetstreamDriverKeyFile /etc/ssl/rsyslog/rsyslog_CLIENT.key.pem
#$ActionSendStreamDriverAuthMode x509/name # enable peer authentication
#$ActionSendStreamDriverPermittedPeer foo # authorize to send encrypted data to server foo
#$ActionSendStreamDriverMode 1 # run driver in TLS-only mode

# ######### Receiving Messages from Remote Hosts ##########
# TCP Syslog Server:
#$ModLoad imtcp  # provides TCP syslog reception
#$TCPServerRun 10514 # start a TCP syslog server at port 10514

# TCP + SSL/TLS Syslog Server:
#$ModLoad imtcp  # provides TCP syslog reception
#$DefaultNetstreamDriver gtls # use gnuTLS for data encryption
#$DefaultNetstreamDriverCAFile /etc/ssl/rsyslog/rsyslog_ca.cert.pem
#$DefaultNetstreamDriverCertFile /etc/ssl/rsyslog/rsyslog_SERVER.cert.pem
#$DefaultNetstreamDriverKeyFile /etc/ssl/rsyslog/rsyslog_SERVER.key.pem
#$InputTCPServerStreamDriverMode 1 # run driver in TLS-only mode
#$InputTCPServerStreamDriverAuthMode x509/name # enable peer authentication
#$InputTCPServerStreamDriverPermittedPeer bar # authorize client named bar (one line per client)
#$TCPServerRun 10514 # start a TCP syslog server at port 10514

# UDP Syslog Server:
#$ModLoad imudp.so  # provides UDP syslog reception
#$UDPServerRun 514 # start a UDP syslog server at standard port 514

# RELP Syslog Server:
#$ModLoad imrelp  # provides RELP syslog reception
#$InputRELPServerRun 10515 # start a RELP syslog server at port 10515
1	# rsyslog v5: load input modules
2	# If you do not load inputs, nothing happens!
3	# You may need to set the module load path if modules are not found.
4
5	$ModLoad immark.so # provides --MARK-- message capability
6	$ModLoad imuxsock.so # provides support for local system logging (e.g. via logger command)
7	$ModLoad imklog.so # kernel logging (formerly provided by rklogd)
8
9	# Include configuration files from directory
10	$IncludeConfig /etc/rsyslog.d/*
11
12	# Check config syntax on startup and abort if unclean (default off)
13	#$AbortOnUncleanConfig on
14
15	# Reduce repeating messages (default off)
16	#$RepeatedMsgReduction on
17
18	# Log all kernel messages to the console.
19	# Logging much else clutters up the screen.
20	#kern.* /dev/console
21
22	# Log anything (except mail) of level info or higher.
23	# Don't log private authentication messages!
24	*.info;mail.none;authpriv.none;cron.none -/var/log/messages
25
26	# The authpriv file has restricted access.
27	authpriv.* /var/log/secure
28
29	# Log all the mail messages in one place.
30	mail.* -/var/log/maillog
31
32	# Log cron stuff
33	cron.* -/var/log/cron
34
35	# Everybody gets emergency messages
36	.emerg
37
38	# Save news errors of level crit and higher in a special file.
39	uucp,news.crit -/var/log/spooler
40
41	# Save boot messages also to boot.log
42	local7.* /var/log/boot.log
43
44	# More configuration examples:
45	#
46	# Remote Logging (we use TCP for reliable delivery)
47	# An on-disk queue is created for this action. If the remote host is
48	# down, messages are spooled to disk and sent when it is up again.
49	#$WorkDirectory /var/spool/rsyslog # where to place spool files
50	#$ActionQueueFileName uniqName # unique name prefix for spool files
51	#$ActionQueueMaxDiskSpace 1g # 1gb space limit (use as much as possible)
52	#$ActionQueueSaveOnShutdown on # save messages to disk on shutdown
53	#$ActionQueueType LinkedList # run asynchronously
54	#$ActionResumeRetryCount -1 # infinety retries if host is down
55	#$ActionResumeInterval 30 # retry interval
56	# remote host is: name/ip:port, e.g. 192.168.0.1:514, port optional
57	#. @@remote-host
58
59	# Remote Logging with TCP + SSL/TLS
60	#$DefaultNetstreamDriver gtls
61	#$DefaultNetstreamDriverCAFile /etc/ssl/rsyslog/rsyslog_ca.cert.pem
62	#$DefaultNetstreamDriverCertFile /etc/ssl/rsyslog/rsyslog_CLIENT.cert.pem
63	#$DefaultNetstreamDriverKeyFile /etc/ssl/rsyslog/rsyslog_CLIENT.key.pem
64	#$ActionSendStreamDriverAuthMode x509/name # enable peer authentication
65	#$ActionSendStreamDriverPermittedPeer foo # authorize to send encrypted data to server foo
66	#$ActionSendStreamDriverMode 1 # run driver in TLS-only mode
67
68	# ######### Receiving Messages from Remote Hosts ##########
69	# TCP Syslog Server:
70	#$ModLoad imtcp # provides TCP syslog reception
71	#$TCPServerRun 10514 # start a TCP syslog server at port 10514
72
73	# TCP + SSL/TLS Syslog Server:
74	#$ModLoad imtcp # provides TCP syslog reception
75	#$DefaultNetstreamDriver gtls # use gnuTLS for data encryption
76	#$DefaultNetstreamDriverCAFile /etc/ssl/rsyslog/rsyslog_ca.cert.pem
77	#$DefaultNetstreamDriverCertFile /etc/ssl/rsyslog/rsyslog_SERVER.cert.pem
78	#$DefaultNetstreamDriverKeyFile /etc/ssl/rsyslog/rsyslog_SERVER.key.pem
79	#$InputTCPServerStreamDriverMode 1 # run driver in TLS-only mode
80	#$InputTCPServerStreamDriverAuthMode x509/name # enable peer authentication
81	#$InputTCPServerStreamDriverPermittedPeer bar # authorize client named bar (one line per client)
82	#$TCPServerRun 10514 # start a TCP syslog server at port 10514
83
84	# UDP Syslog Server:
85	#$ModLoad imudp.so # provides UDP syslog reception
86	#$UDPServerRun 514 # start a UDP syslog server at standard port 514
87
88	# RELP Syslog Server:
89	#$ModLoad imrelp # provides RELP syslog reception
90	#$InputRELPServerRun 10515 # start a RELP syslog server at port 10515